Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 236

Last change on this file since 236 was 232, checked in by raasch, 16 years ago
bugfix concerning output of p profile
Property svn:keywords set to `Id`
File size: 109.1 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Bugfix: pressure included for profile output
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 232 2009-02-10 02:25:26Z letzel $
11	!
12	! 222 2009-01-12 16:04:16Z letzel
13	! +user_check_parameters
14	! Output of messages replaced by message handling routine.
15	! Implementation of an MPI-1 coupling: replaced myid with target_id,
16	! deleted __mpi2 directives
17	! Check that PALM is called with mrun -K parallel for coupling
18	!
19	! 197 2008-09-16 15:29:03Z raasch
20	! Bug fix: Construction of vertical profiles when 10 gradients have been
21	! specified in the parameter list (ug, vg, pt, q, sa, lad)
22	!
23	! Strict grid matching along z is not needed for mg-solver.
24	! Leaf area density (LAD) explicitly set to its surface value at k=0
25	! Case of reading data for recycling included in initializing_actions,
26	! check of turbulent_inflow and calculation of recycling_plane.
27	! q*2 profile added
28	!
29	! 138 2007-11-28 10:03:58Z letzel
30	! Plant canopy added
31	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
32	! Multigrid solver allows topography, checking of dt_sort_particles
33	! Bugfix: initializing u_init and v_init in case of ocean runs
34	!
35	! 109 2007-08-28 15:26:47Z letzel
36	! Check coupling_mode and set default (obligatory) values (like boundary
37	! conditions for temperature and fluxes) in case of coupled runs.
38	! +profiles for wp and w"e
39	! Bugfix: Error message concerning output of particle concentration (pc)
40	! modified
41	! More checks and more default values for coupled runs
42	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
43	! cloud_physics = .T.)
44	! Rayleigh damping for ocean fixed.
45	! Check and, if necessary, set default value for dt_coupling
46	!
47	! 97 2007-06-21 08:23:15Z raasch
48	! Initial salinity profile is calculated, salinity boundary conditions are
49	! checked,
50	! z_max_do1d is checked only in case of ocean = .f.,
51	! +initial temperature and geostrophic velocity profiles for the ocean version,
52	! use_pt_reference renamed use_reference
53	!
54	! 89 2007-05-25 12:08:31Z raasch
55	! Check for user-defined profiles
56	!
57	! 75 2007-03-22 09:54:05Z raasch
58	! "by_user" allowed as initializing action, -data_output_ts,
59	! leapfrog with non-flat topography not allowed any more, loop_optimization
60	! and pt_reference are checked, moisture renamed humidity,
61	! output of precipitation amount/rate and roughnes length + check
62	! possible negative humidities are avoided in initial profile,
63	! dirichlet/neumann changed to dirichlet/radiation, etc.,
64	! revision added to run_description_header
65	!
66	! 20 2007-02-26 00:12:32Z raasch
67	! Temperature and humidity gradients at top are now calculated for nzt+1,
68	! top_heatflux and respective boundary condition bc_pt_t is checked
69	!
70	! RCS Log replace by Id keyword, revision history cleaned up
71	!
72	! Revision 1.61 2006/08/04 14:20:25 raasch
73	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
74	! use_upstream_for_tke, default value for dt_dopts,
75	! generation of file header moved from routines palm and header to here
76	!
77	! Revision 1.1 1997/08/26 06:29:23 raasch
78	! Initial revision
79	!
80	!
81	! Description:
82	! ------------
83	! Check control parameters and deduce further quantities.
84	!------------------------------------------------------------------------------!
85
86	USE arrays_3d
87	USE constants
88	USE control_parameters
89	USE grid_variables
90	USE indices
91	USE model_1d
92	USE netcdf_control
93	USE particle_attributes
94	USE pegrid
95	USE profil_parameter
96	USE statistics
97	USE transpose_indices
98
99	IMPLICIT NONE
100
101	CHARACTER (LEN=1) :: sq
102	CHARACTER (LEN=6) :: var
103	CHARACTER (LEN=7) :: unit
104	CHARACTER (LEN=8) :: date
105	CHARACTER (LEN=10) :: time
106	CHARACTER (LEN=40) :: coupling_string
107	CHARACTER (LEN=100) :: action
108
109	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
110	position, prec
111	LOGICAL :: found, ldum
112	REAL :: gradient, maxn, maxp, remote = 0.0
113
114	!
115	!-- Warning, if host is not set
116	IF ( host(1:1) == ' ' ) THEN
117	message_string = '"host" is not set. Please check that environment ' // &
118	'variable "localhost" & is set before running PALM'
119	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
120	ENDIF
121
122	!
123	!-- Check the coupling mode
124	IF ( coupling_mode /= 'uncoupled' .AND. &
125	coupling_mode /= 'atmosphere_to_ocean' .AND. &
126	coupling_mode /= 'ocean_to_atmosphere' ) THEN
127	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
128	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
129	ENDIF
130
131	!
132	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
133	IF ( coupling_mode /= 'uncoupled' ) THEN
134
135	IF ( dt_coupling == 9999999.9 ) THEN
136	message_string = 'dt_coupling is not set but required for coup' // &
137	'ling mode "' // TRIM( coupling_mode ) // '"'
138	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
139	ENDIF
140
141	#if defined( __parallel )
142	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
143	ierr )
144	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
145	status, ierr )
146	IF ( dt_coupling /= remote ) THEN
147	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
148	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
149	'dt_coupling_remote = ', remote
150	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
151	ENDIF
152	IF ( dt_coupling <= 0.0 ) THEN
153	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
154	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
155	status, ierr )
156	dt_coupling = MAX( dt_max, remote )
157	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
158	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
159	'MAX(dt_max(A,O)) = ', dt_coupling
160	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
161	ENDIF
162
163	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
164	ierr )
165	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
166	status, ierr )
167	IF ( restart_time /= remote ) THEN
168	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
169	'": restart_time = ', restart_time, '& is not equal to ', &
170	'restart_time_remote = ', remote
171	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
172	ENDIF
173
174	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
175	ierr )
176	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
177	status, ierr )
178	IF ( dt_restart /= remote ) THEN
179	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
180	'": dt_restart = ', dt_restart, '& is not equal to ', &
181	'dt_restart_remote = ', remote
182	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
183	ENDIF
184
185	CALL MPI_SEND( end_time, 1, MPI_REAL, target_id, 14, comm_inter, ierr )
186	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
187	status, ierr )
188	IF ( end_time /= remote ) THEN
189	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
190	'": end_time = ', end_time, '& is not equal to ', &
191	'end_time_remote = ', remote
192	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
193	ENDIF
194
195	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
196	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
197	status, ierr )
198	IF ( dx /= remote ) THEN
199	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
200	'": dx = ', dx, '& is not equal to dx_remote = ', remote
201	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
202	ENDIF
203
204	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
205	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
206	status, ierr )
207	IF ( dy /= remote ) THEN
208	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
209	'": dy = ', dy, '& is not equal to dy_remote = ', remote
210	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
211	ENDIF
212
213	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
214	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
215	status, ierr )
216	IF ( nx /= iremote ) THEN
217	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
218	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
219	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
220	ENDIF
221
222	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
223	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
224	status, ierr )
225	IF ( ny /= iremote ) THEN
226	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
227	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
228	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
229	ENDIF
230	#else
231	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
232	' ''mrun -K parallel'''
233	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
234	#endif
235	ENDIF
236
237	#if defined( __parallel )
238	!
239	!-- Exchange via intercommunicator
240	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
241	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
242	ierr )
243	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
244	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
245	comm_inter, status, ierr )
246	ENDIF
247	#endif
248
249
250	!
251	!-- Generate the file header which is used as a header for most of PALM's
252	!-- output files
253	CALL DATE_AND_TIME( date, time )
254	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
255	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
256	IF ( coupling_mode == 'uncoupled' ) THEN
257	coupling_string = ''
258	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
259	coupling_string = ' coupled (atmosphere)'
260	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
261	coupling_string = ' coupled (ocean)'
262	ENDIF
263
264	WRITE ( run_description_header, &
265	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
266	TRIM( version ), TRIM( revision ), 'run: ', &
267	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
268	'host: ', TRIM( host ), run_date, run_time
269
270	!
271	!-- Check the general loop optimization method
272	IF ( loop_optimization == 'default' ) THEN
273	IF ( host(1:3) == 'nec' ) THEN
274	loop_optimization = 'vector'
275	ELSE
276	loop_optimization = 'cache'
277	ENDIF
278	ENDIF
279	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
280	.AND. loop_optimization /= 'vector' ) THEN
281	message_string = 'illegal value given for loop_optimization: "' // &
282	TRIM( loop_optimization ) // '"'
283	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
284	ENDIF
285
286	!
287	!-- Check topography setting (check for illegal parameter combinations)
288	IF ( topography /= 'flat' ) THEN
289	action = ' '
290	IF ( scalar_advec /= 'pw-scheme' ) THEN
291	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
292	ENDIF
293	IF ( momentum_advec /= 'pw-scheme' ) THEN
294	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
295	ENDIF
296	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
297	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
298	ENDIF
299	IF ( psolver == 'sor' ) THEN
300	WRITE( action, '(A,A)' ) 'psolver = ', psolver
301	ENDIF
302	IF ( sloping_surface ) THEN
303	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
304	ENDIF
305	IF ( galilei_transformation ) THEN
306	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
307	ENDIF
308	IF ( cloud_physics ) THEN
309	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
310	ENDIF
311	IF ( cloud_droplets ) THEN
312	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
313	ENDIF
314	IF ( humidity ) THEN
315	WRITE( action, '(A)' ) 'humidity = .TRUE.'
316	ENDIF
317	IF ( .NOT. prandtl_layer ) THEN
318	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
319	ENDIF
320	IF ( action /= ' ' ) THEN
321	message_string = 'a non-flat topography does not allow ' // &
322	TRIM( action )
323	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
324	ENDIF
325	ENDIF
326
327	!
328	!-- Check ocean setting
329	IF ( ocean ) THEN
330	action = ' '
331	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
332	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
333	ENDIF
334	IF ( momentum_advec == 'ups-scheme' ) THEN
335	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
336	ENDIF
337	IF ( action /= ' ' ) THEN
338	message_string = 'ocean = .T. does not allow ' // TRIM( action )
339	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
340	ENDIF
341	ENDIF
342
343	!
344	!-- Check whether there are any illegal values
345	!-- Pressure solver:
346	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
347	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
348	message_string = 'unknown solver for perturbation pressure: psolver' // &
349	' = "' // TRIM( psolver ) // '"'
350	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
351	ENDIF
352
353	#if defined( __parallel )
354	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
355	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
356	'for a 1d domain-decomposition along x & please do' // &
357	' not set npey/=1 in the parameter file'
358	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
359	ENDIF
360	IF ( psolver == 'poisfft_hybrid' .AND. &
361	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
362	psolver == 'multigrid' .AND. &
363	( nxra > nxr .OR. nyna > nyn ) ) THEN
364	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
365	'work for subdomains with unequal size & please ' // &
366	'set grid_matching = ''strict'' in the parameter file'
367	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
368	ENDIF
369	#else
370	IF ( psolver == 'poisfft_hybrid' ) THEN
371	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
372	' for a parallel environment'
373	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
374	ENDIF
375	#endif
376
377	IF ( psolver == 'multigrid' ) THEN
378	IF ( cycle_mg == 'w' ) THEN
379	gamma_mg = 2
380	ELSEIF ( cycle_mg == 'v' ) THEN
381	gamma_mg = 1
382	ELSE
383	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
384	TRIM( cycle_mg ) // '"'
385	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
386	ENDIF
387	ENDIF
388
389	IF ( fft_method /= 'singleton-algorithm' .AND. &
390	fft_method /= 'temperton-algorithm' .AND. &
391	fft_method /= 'system-specific' ) THEN
392	message_string = 'unknown fft-algorithm: fft_method = "' // &
393	TRIM( fft_method ) // '"'
394	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
395	ENDIF
396
397	!
398	!-- Advection schemes:
399	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
400	THEN
401	message_string = 'unknown advection scheme: momentum_advec = "' // &
402	TRIM( momentum_advec ) // '"'
403	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
404	ENDIF
405	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
406	.AND. timestep_scheme /= 'euler' ) THEN
407	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
408	'" is not allowed with timestep_scheme = "' // &
409	TRIM( timestep_scheme ) // '"'
410	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
411	ENDIF
412
413	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
414	scalar_advec /= 'ups-scheme' ) THEN
415	message_string = 'unknown advection scheme: scalar_advec = "' // &
416	TRIM( scalar_advec ) // '"'
417	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
418	ENDIF
419
420	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
421	use_upstream_for_tke = .TRUE.
422	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
423	'use_sgs_for_particles = .TRUE.'
424	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
425	ENDIF
426
427	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
428	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
429	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
430	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
431	ENDIF
432
433	!
434	!-- Timestep schemes:
435	SELECT CASE ( TRIM( timestep_scheme ) )
436
437	CASE ( 'euler' )
438	intermediate_timestep_count_max = 1
439	asselin_filter_factor = 0.0
440
441	CASE ( 'leapfrog', 'leapfrog+euler' )
442	intermediate_timestep_count_max = 1
443
444	CASE ( 'runge-kutta-2' )
445	intermediate_timestep_count_max = 2
446	asselin_filter_factor = 0.0
447
448	CASE ( 'runge-kutta-3' )
449	intermediate_timestep_count_max = 3
450	asselin_filter_factor = 0.0
451
452	CASE DEFAULT
453	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
454	TRIM( timestep_scheme ) // '"'
455	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
456
457	END SELECT
458
459	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
460	THEN
461	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
462	'" & does not work with timestep_scheme "' // &
463	TRIM( timestep_scheme ) // '"'
464	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
465	ENDIF
466
467	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
468	THEN
469	message_string = 'momentum advection scheme "' // &
470	TRIM( momentum_advec ) // '" & does not work with ' // &
471	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
472	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
473	ENDIF
474
475	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
476	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
477	!
478	!-- No restart run: several initialising actions are possible
479	action = initializing_actions
480	DO WHILE ( TRIM( action ) /= '' )
481	position = INDEX( action, ' ' )
482	SELECT CASE ( action(1:position-1) )
483
484	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
485	'by_user', 'initialize_vortex', 'initialize_ptanom' )
486	action = action(position+1:)
487
488	CASE DEFAULT
489	message_string = 'initializing_action = "' // &
490	TRIM( action ) // '" unkown or not allowed'
491	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
492
493	END SELECT
494	ENDDO
495	ENDIF
496
497	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
498	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
499	message_string = 'initializing_actions = "set_constant_profiles"' // &
500	' and "set_1d-model_profiles" are not allowed ' // &
501	'simultaneously'
502	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
503	ENDIF
504
505	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
506	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
507	message_string = 'initializing_actions = "set_constant_profiles"' // &
508	' and "by_user" are not allowed simultaneously'
509	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
510	ENDIF
511
512	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
513	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
514	message_string = 'initializing_actions = "by_user" and ' // &
515	'"set_1d-model_profiles" are not allowed simultaneously'
516	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
517	ENDIF
518
519	IF ( cloud_physics .AND. .NOT. humidity ) THEN
520	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
521	'not allowed with humidity = ', humidity
522	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
523	ENDIF
524
525	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
526	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
527	'not allowed with cloud_physics = ', cloud_physics
528	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
529	ENDIF
530
531	IF ( humidity .AND. sloping_surface ) THEN
532	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
533	'are not allowed simultaneously'
534	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
535	ENDIF
536
537	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
538	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
539	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
540	ENDIF
541
542	IF ( passive_scalar .AND. humidity ) THEN
543	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
544	'is not allowed simultaneously'
545	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
546	ENDIF
547
548	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
549	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
550	' = .TRUE.'
551	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
552	ENDIF
553
554	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
555	message_string = 'illegal value "' // TRIM( grid_matching ) // &
556	'" found for parameter grid_matching'
557	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
558	ENDIF
559
560	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
561	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
562	'coefficient & given value is drag_coefficient = 0.0'
563	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
564	ENDIF
565
566	!
567	!-- In case of no model continuation run, check initialising parameters and
568	!-- deduce further quantities
569	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
570
571	!
572	!-- Initial profiles for 1D and 3D model, respectively
573	u_init = ug_surface
574	v_init = vg_surface
575	pt_init = pt_surface
576	IF ( humidity ) q_init = q_surface
577	IF ( ocean ) sa_init = sa_surface
578	IF ( passive_scalar ) q_init = s_surface
579	IF ( plant_canopy ) lad = 0.0
580
581	!
582	!--
583	!-- If required, compute initial profile of the geostrophic wind
584	!-- (component ug)
585	i = 1
586	gradient = 0.0
587
588	IF ( .NOT. ocean ) THEN
589
590	ug_vertical_gradient_level_ind(1) = 0
591	ug(0) = ug_surface
592	DO k = 1, nzt+1
593	IF ( i < 11 ) THEN
594	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
595	ug_vertical_gradient_level(i) >= 0.0 ) THEN
596	gradient = ug_vertical_gradient(i) / 100.0
597	ug_vertical_gradient_level_ind(i) = k - 1
598	i = i + 1
599	ENDIF
600	ENDIF
601	IF ( gradient /= 0.0 ) THEN
602	IF ( k /= 1 ) THEN
603	ug(k) = ug(k-1) + dzu(k) * gradient
604	ELSE
605	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
606	ENDIF
607	ELSE
608	ug(k) = ug(k-1)
609	ENDIF
610	ENDDO
611
612	ELSE
613
614	ug_vertical_gradient_level_ind(1) = nzt+1
615	ug(nzt+1) = ug_surface
616	DO k = nzt, 0, -1
617	IF ( i < 11 ) THEN
618	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
619	ug_vertical_gradient_level(i) <= 0.0 ) THEN
620	gradient = ug_vertical_gradient(i) / 100.0
621	ug_vertical_gradient_level_ind(i) = k + 1
622	i = i + 1
623	ENDIF
624	ENDIF
625	IF ( gradient /= 0.0 ) THEN
626	IF ( k /= nzt ) THEN
627	ug(k) = ug(k+1) - dzu(k+1) * gradient
628	ELSE
629	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
630	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
631	ENDIF
632	ELSE
633	ug(k) = ug(k+1)
634	ENDIF
635	ENDDO
636
637	ENDIF
638
639	u_init = ug
640
641	!
642	!-- In case of no given gradients for ug, choose a vanishing gradient
643	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
644	ug_vertical_gradient_level(1) = 0.0
645	ENDIF
646
647	!
648	!--
649	!-- If required, compute initial profile of the geostrophic wind
650	!-- (component vg)
651	i = 1
652	gradient = 0.0
653
654	IF ( .NOT. ocean ) THEN
655
656	vg_vertical_gradient_level_ind(1) = 0
657	vg(0) = vg_surface
658	DO k = 1, nzt+1
659	IF ( i < 11 ) THEN
660	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
661	vg_vertical_gradient_level(i) >= 0.0 ) THEN
662	gradient = vg_vertical_gradient(i) / 100.0
663	vg_vertical_gradient_level_ind(i) = k - 1
664	i = i + 1
665	ENDIF
666	ENDIF
667	IF ( gradient /= 0.0 ) THEN
668	IF ( k /= 1 ) THEN
669	vg(k) = vg(k-1) + dzu(k) * gradient
670	ELSE
671	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
672	ENDIF
673	ELSE
674	vg(k) = vg(k-1)
675	ENDIF
676	ENDDO
677
678	ELSE
679
680	vg_vertical_gradient_level_ind(1) = nzt+1
681	vg(nzt+1) = vg_surface
682	DO k = nzt, 0, -1
683	IF ( i < 11 ) THEN
684	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
685	vg_vertical_gradient_level(i) <= 0.0 ) THEN
686	gradient = vg_vertical_gradient(i) / 100.0
687	vg_vertical_gradient_level_ind(i) = k + 1
688	i = i + 1
689	ENDIF
690	ENDIF
691	IF ( gradient /= 0.0 ) THEN
692	IF ( k /= nzt ) THEN
693	vg(k) = vg(k+1) - dzu(k+1) * gradient
694	ELSE
695	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
696	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
697	ENDIF
698	ELSE
699	vg(k) = vg(k+1)
700	ENDIF
701	ENDDO
702
703	ENDIF
704
705	v_init = vg
706
707	!
708	!-- In case of no given gradients for vg, choose a vanishing gradient
709	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
710	vg_vertical_gradient_level(1) = 0.0
711	ENDIF
712
713	!
714	!-- Compute initial temperature profile using the given temperature gradients
715	i = 1
716	gradient = 0.0
717
718	IF ( .NOT. ocean ) THEN
719
720	pt_vertical_gradient_level_ind(1) = 0
721	DO k = 1, nzt+1
722	IF ( i < 11 ) THEN
723	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
724	pt_vertical_gradient_level(i) >= 0.0 ) THEN
725	gradient = pt_vertical_gradient(i) / 100.0
726	pt_vertical_gradient_level_ind(i) = k - 1
727	i = i + 1
728	ENDIF
729	ENDIF
730	IF ( gradient /= 0.0 ) THEN
731	IF ( k /= 1 ) THEN
732	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
733	ELSE
734	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
735	ENDIF
736	ELSE
737	pt_init(k) = pt_init(k-1)
738	ENDIF
739	ENDDO
740
741	ELSE
742
743	pt_vertical_gradient_level_ind(1) = nzt+1
744	DO k = nzt, 0, -1
745	IF ( i < 11 ) THEN
746	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
747	pt_vertical_gradient_level(i) <= 0.0 ) THEN
748	gradient = pt_vertical_gradient(i) / 100.0
749	pt_vertical_gradient_level_ind(i) = k + 1
750	i = i + 1
751	ENDIF
752	ENDIF
753	IF ( gradient /= 0.0 ) THEN
754	IF ( k /= nzt ) THEN
755	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
756	ELSE
757	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
758	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
759	ENDIF
760	ELSE
761	pt_init(k) = pt_init(k+1)
762	ENDIF
763	ENDDO
764
765	ENDIF
766
767	!
768	!-- In case of no given temperature gradients, choose gradient of neutral
769	!-- stratification
770	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
771	pt_vertical_gradient_level(1) = 0.0
772	ENDIF
773
774	!
775	!-- Store temperature gradient at the top boundary for possible Neumann
776	!-- boundary condition
777	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
778
779	!
780	!-- If required, compute initial humidity or scalar profile using the given
781	!-- humidity/scalar gradient. In case of scalar transport, initially store
782	!-- values of the scalar parameters on humidity parameters
783	IF ( passive_scalar ) THEN
784	bc_q_b = bc_s_b
785	bc_q_t = bc_s_t
786	q_surface = s_surface
787	q_surface_initial_change = s_surface_initial_change
788	q_vertical_gradient = s_vertical_gradient
789	q_vertical_gradient_level = s_vertical_gradient_level
790	surface_waterflux = surface_scalarflux
791	ENDIF
792
793	IF ( humidity .OR. passive_scalar ) THEN
794
795	i = 1
796	gradient = 0.0
797	q_vertical_gradient_level_ind(1) = 0
798	DO k = 1, nzt+1
799	IF ( i < 11 ) THEN
800	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
801	q_vertical_gradient_level(i) >= 0.0 ) THEN
802	gradient = q_vertical_gradient(i) / 100.0
803	q_vertical_gradient_level_ind(i) = k - 1
804	i = i + 1
805	ENDIF
806	ENDIF
807	IF ( gradient /= 0.0 ) THEN
808	IF ( k /= 1 ) THEN
809	q_init(k) = q_init(k-1) + dzu(k) * gradient
810	ELSE
811	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
812	ENDIF
813	ELSE
814	q_init(k) = q_init(k-1)
815	ENDIF
816	!
817	!-- Avoid negative humidities
818	IF ( q_init(k) < 0.0 ) THEN
819	q_init(k) = 0.0
820	ENDIF
821	ENDDO
822
823	!
824	!-- In case of no given humidity gradients, choose zero gradient
825	!-- conditions
826	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
827	q_vertical_gradient_level(1) = 0.0
828	ENDIF
829
830	!
831	!-- Store humidity gradient at the top boundary for possile Neumann
832	!-- boundary condition
833	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
834
835	ENDIF
836
837	!
838	!-- If required, compute initial salinity profile using the given salinity
839	!-- gradients
840	IF ( ocean ) THEN
841
842	i = 1
843	gradient = 0.0
844
845	sa_vertical_gradient_level_ind(1) = nzt+1
846	DO k = nzt, 0, -1
847	IF ( i < 11 ) THEN
848	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
849	sa_vertical_gradient_level(i) <= 0.0 ) THEN
850	gradient = sa_vertical_gradient(i) / 100.0
851	sa_vertical_gradient_level_ind(i) = k + 1
852	i = i + 1
853	ENDIF
854	ENDIF
855	IF ( gradient /= 0.0 ) THEN
856	IF ( k /= nzt ) THEN
857	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
858	ELSE
859	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
860	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
861	ENDIF
862	ELSE
863	sa_init(k) = sa_init(k+1)
864	ENDIF
865	ENDDO
866
867	ENDIF
868
869	!
870	!-- If required compute the profile of leaf area density used in the plant canopy model
871	IF ( plant_canopy ) THEN
872
873	i = 1
874	gradient = 0.0
875
876	IF ( .NOT. ocean ) THEN
877
878	lad(0) = lad_surface
879
880	lad_vertical_gradient_level_ind(1) = 0
881	DO k = 1, pch_index
882	IF ( i < 11 ) THEN
883	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
884	lad_vertical_gradient_level(i) >= 0.0 ) THEN
885	gradient = lad_vertical_gradient(i)
886	lad_vertical_gradient_level_ind(i) = k - 1
887	i = i + 1
888	ENDIF
889	ENDIF
890	IF ( gradient /= 0.0 ) THEN
891	IF ( k /= 1 ) THEN
892	lad(k) = lad(k-1) + dzu(k) * gradient
893	ELSE
894	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
895	ENDIF
896	ELSE
897	lad(k) = lad(k-1)
898	ENDIF
899	ENDDO
900
901	ENDIF
902
903	!
904	!-- In case of no given leaf area density gradients, choose a vanishing gradient
905	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
906	lad_vertical_gradient_level(1) = 0.0
907	ENDIF
908
909	ENDIF
910
911	ENDIF
912
913	!
914	!-- Compute Coriolis parameter
915	f = 2.0 * omega * SIN( phi / 180.0 * pi )
916	fs = 2.0 * omega * COS( phi / 180.0 * pi )
917
918	!
919	!-- Ocean runs always use reference values in the buoyancy term. Therefore
920	!-- set the reference temperature equal to the surface temperature.
921	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
922
923	!
924	!-- Reference value has to be used in buoyancy terms
925	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
926
927	!
928	!-- Sign of buoyancy/stability terms
929	IF ( ocean ) atmos_ocean_sign = -1.0
930
931	!
932	!-- Ocean version must use flux boundary conditions at the top
933	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
934	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
935	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
936	ENDIF
937
938	!
939	!-- In case of a given slope, compute the relevant quantities
940	IF ( alpha_surface /= 0.0 ) THEN
941	IF ( ABS( alpha_surface ) > 90.0 ) THEN
942	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
943	' ) must be < 90.0'
944	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
945	ENDIF
946	sloping_surface = .TRUE.
947	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
948	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
949	ENDIF
950
951	!
952	!-- Check time step and cfl_factor
953	IF ( dt /= -1.0 ) THEN
954	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
955	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
956	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
957	ENDIF
958	dt_3d = dt
959	dt_fixed = .TRUE.
960	ENDIF
961
962	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
963	IF ( cfl_factor == -1.0 ) THEN
964	IF ( momentum_advec == 'ups-scheme' .OR. &
965	scalar_advec == 'ups-scheme' ) THEN
966	cfl_factor = 0.8
967	ELSE
968	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
969	cfl_factor = 0.8
970	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
971	cfl_factor = 0.9
972	ELSE
973	cfl_factor = 0.1
974	ENDIF
975	ENDIF
976	ELSE
977	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
978	' out of range & 0.0 < cfl_factor <= 1.0 is required'
979	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
980	ENDIF
981	ENDIF
982
983	!
984	!-- Store simulated time at begin
985	simulated_time_at_begin = simulated_time
986
987	!
988	!-- Set wind speed in the Galilei-transformed system
989	IF ( galilei_transformation ) THEN
990	IF ( use_ug_for_galilei_tr .AND. &
991	ug_vertical_gradient_level(1) == 0.0 .AND. &
992	vg_vertical_gradient_level(1) == 0.0 ) THEN
993	u_gtrans = ug_surface
994	v_gtrans = vg_surface
995	ELSEIF ( use_ug_for_galilei_tr .AND. &
996	ug_vertical_gradient_level(1) /= 0.0 ) THEN
997	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
998	' with galilei transformation'
999	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1000	ELSEIF ( use_ug_for_galilei_tr .AND. &
1001	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1002	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1003	' with galilei transformation'
1004	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1005	ELSE
1006	message_string = 'variable translation speed used for galilei-' // &
1007	'transformation, which may cause & instabilities in stably ' // &
1008	'stratified regions'
1009	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1010	ENDIF
1011	ENDIF
1012
1013	!
1014	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1015	!-- fluxes have to be used in the diffusion-terms
1016	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1017
1018	!
1019	!-- Check boundary conditions and set internal variables:
1020	!-- Lateral boundary conditions
1021	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1022	bc_lr /= 'radiation/dirichlet' ) THEN
1023	message_string = 'unknown boundary condition: bc_lr = "' // &
1024	TRIM( bc_lr ) // '"'
1025	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1026	ENDIF
1027	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1028	bc_ns /= 'radiation/dirichlet' ) THEN
1029	message_string = 'unknown boundary condition: bc_ns = "' // &
1030	TRIM( bc_ns ) // '"'
1031	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1032	ENDIF
1033
1034	!
1035	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1036	!-- Willimas advection scheme. Several schemes and tools do not work with
1037	!-- non-cyclic boundary conditions.
1038	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1039	IF ( psolver /= 'multigrid' ) THEN
1040	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1041	'psolver = "' // TRIM( psolver ) // '"'
1042	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1043	ENDIF
1044	IF ( momentum_advec /= 'pw-scheme' ) THEN
1045	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1046	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1047	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1048	ENDIF
1049	IF ( scalar_advec /= 'pw-scheme' ) THEN
1050	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1051	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1052	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1053	ENDIF
1054	IF ( galilei_transformation ) THEN
1055	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1056	'galilei_transformation = .T.'
1057	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1058	ENDIF
1059	ENDIF
1060
1061	!
1062	!-- Bottom boundary condition for the turbulent Kinetic energy
1063	IF ( bc_e_b == 'neumann' ) THEN
1064	ibc_e_b = 1
1065	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1066	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1067	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1068	ENDIF
1069	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1070	ibc_e_b = 2
1071	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1072	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1073	TRIM( bc_e_b ) // '"'
1074	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1075	ENDIF
1076	IF ( .NOT. prandtl_layer ) THEN
1077	bc_e_b = 'neumann'
1078	ibc_e_b = 1
1079	message_string = 'boundary condition bc_e_b changed to "' // &
1080	TRIM( bc_e_b ) // '"'
1081	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1082	ENDIF
1083	ELSE
1084	message_string = 'unknown boundary condition: bc_e_b = "' // &
1085	TRIM( bc_e_b ) // '"'
1086	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1087	ENDIF
1088
1089	!
1090	!-- Boundary conditions for perturbation pressure
1091	IF ( bc_p_b == 'dirichlet' ) THEN
1092	ibc_p_b = 0
1093	ELSEIF ( bc_p_b == 'neumann' ) THEN
1094	ibc_p_b = 1
1095	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1096	ibc_p_b = 2
1097	ELSE
1098	message_string = 'unknown boundary condition: bc_p_b = "' // &
1099	TRIM( bc_p_b ) // '"'
1100	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1101	ENDIF
1102	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1103	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1104	'" not allowed with prandtl_layer = .FALSE.'
1105	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1106	ENDIF
1107	IF ( bc_p_t == 'dirichlet' ) THEN
1108	ibc_p_t = 0
1109	ELSEIF ( bc_p_t == 'neumann' ) THEN
1110	ibc_p_t = 1
1111	ELSE
1112	message_string = 'unknown boundary condition: bc_p_t = "' // &
1113	TRIM( bc_p_t ) // '"'
1114	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1115	ENDIF
1116
1117	!
1118	!-- Boundary conditions for potential temperature
1119	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1120	ibc_pt_b = 2
1121	ELSE
1122	IF ( bc_pt_b == 'dirichlet' ) THEN
1123	ibc_pt_b = 0
1124	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1125	ibc_pt_b = 1
1126	ELSE
1127	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1128	TRIM( bc_pt_b ) // '"'
1129	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1130	ENDIF
1131	ENDIF
1132
1133	IF ( bc_pt_t == 'dirichlet' ) THEN
1134	ibc_pt_t = 0
1135	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1136	ibc_pt_t = 1
1137	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1138	ibc_pt_t = 2
1139	ELSE
1140	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1141	TRIM( bc_pt_t ) // '"'
1142	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1143	ENDIF
1144
1145	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1146	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1147	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1148	top_momentumflux_v /= 9999999.9 ) THEN
1149	constant_top_momentumflux = .TRUE.
1150	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1151	top_momentumflux_v == 9999999.9 ) ) THEN
1152	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1153	'must be set'
1154	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1155	ENDIF
1156
1157	!
1158	!-- A given surface temperature implies Dirichlet boundary condition for
1159	!-- temperature. In this case specification of a constant heat flux is
1160	!-- forbidden.
1161	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1162	surface_heatflux /= 0.0 ) THEN
1163	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1164	'& is not allowed with constant_heatflux = .TRUE.'
1165	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1166	ENDIF
1167	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1168	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1169	'wed with pt_surface_initial_change (/=0) = ', &
1170	pt_surface_initial_change
1171	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1172	ENDIF
1173
1174	!
1175	!-- A given temperature at the top implies Dirichlet boundary condition for
1176	!-- temperature. In this case specification of a constant heat flux is
1177	!-- forbidden.
1178	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1179	top_heatflux /= 0.0 ) THEN
1180	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1181	'" is not allowed with constant_top_heatflux = .TRUE.'
1182	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1183	ENDIF
1184
1185	!
1186	!-- Boundary conditions for salinity
1187	IF ( ocean ) THEN
1188	IF ( bc_sa_t == 'dirichlet' ) THEN
1189	ibc_sa_t = 0
1190	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1191	ibc_sa_t = 1
1192	ELSE
1193	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1194	TRIM( bc_sa_t ) // '"'
1195	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1196	ENDIF
1197
1198	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1199	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1200	message_string = 'boundary condition: bc_sa_t = "' // &
1201	TRIM( bc_sa_t ) // '" requires to set ' // &
1202	'top_salinityflux'
1203	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1204	ENDIF
1205
1206	!
1207	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1208	!-- salinity. In this case specification of a constant salinity flux is
1209	!-- forbidden.
1210	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1211	top_salinityflux /= 0.0 ) THEN
1212	message_string = 'boundary condition: bc_sa_t = "' // &
1213	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1214	'constant_top_salinityflux = .TRUE.'
1215	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1216	ENDIF
1217
1218	ENDIF
1219
1220	!
1221	!-- In case of humidity or passive scalar, set boundary conditions for total
1222	!-- water content / scalar
1223	IF ( humidity .OR. passive_scalar ) THEN
1224	IF ( humidity ) THEN
1225	sq = 'q'
1226	ELSE
1227	sq = 's'
1228	ENDIF
1229	IF ( bc_q_b == 'dirichlet' ) THEN
1230	ibc_q_b = 0
1231	ELSEIF ( bc_q_b == 'neumann' ) THEN
1232	ibc_q_b = 1
1233	ELSE
1234	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1235	'_b ="' // TRIM( bc_q_b ) // '"'
1236	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1237	ENDIF
1238	IF ( bc_q_t == 'dirichlet' ) THEN
1239	ibc_q_t = 0
1240	ELSEIF ( bc_q_t == 'neumann' ) THEN
1241	ibc_q_t = 1
1242	ELSE
1243	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1244	'_t ="' // TRIM( bc_q_t ) // '"'
1245	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1246	ENDIF
1247
1248	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1249
1250	!
1251	!-- A given surface humidity implies Dirichlet boundary condition for
1252	!-- humidity. In this case specification of a constant water flux is
1253	!-- forbidden.
1254	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1255	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1256	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1257	'th prescribed surface flux'
1258	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1259	ENDIF
1260	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1261	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1262	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1263	q_surface_initial_change
1264	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1265	ENDIF
1266
1267	ENDIF
1268
1269	!
1270	!-- Boundary conditions for horizontal components of wind speed
1271	IF ( bc_uv_b == 'dirichlet' ) THEN
1272	ibc_uv_b = 0
1273	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1274	ibc_uv_b = 1
1275	IF ( prandtl_layer ) THEN
1276	message_string = 'boundary condition: bc_uv_b = "' // &
1277	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1278	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1279	ENDIF
1280	ELSE
1281	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1282	TRIM( bc_uv_b ) // '"'
1283	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1284	ENDIF
1285
1286	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1287	bc_uv_t = 'neumann'
1288	ibc_uv_t = 1
1289	ELSE
1290	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1291	ibc_uv_t = 0
1292	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1293	ibc_uv_t = 1
1294	ELSE
1295	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1296	TRIM( bc_uv_t ) // '"'
1297	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1298	ENDIF
1299	ENDIF
1300
1301	!
1302	!-- Compute and check, respectively, the Rayleigh Damping parameter
1303	IF ( rayleigh_damping_factor == -1.0 ) THEN
1304	IF ( momentum_advec == 'ups-scheme' ) THEN
1305	rayleigh_damping_factor = 0.01
1306	ELSE
1307	rayleigh_damping_factor = 0.0
1308	ENDIF
1309	ELSE
1310	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1311	THEN
1312	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1313	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1314	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1315	ENDIF
1316	ENDIF
1317
1318	IF ( rayleigh_damping_height == -1.0 ) THEN
1319	IF ( .NOT. ocean ) THEN
1320	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1321	ELSE
1322	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1323	ENDIF
1324	ELSE
1325	IF ( .NOT. ocean ) THEN
1326	IF ( rayleigh_damping_height < 0.0 .OR. &
1327	rayleigh_damping_height > zu(nzt) ) THEN
1328	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1329	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1330	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1331	ENDIF
1332	ELSE
1333	IF ( rayleigh_damping_height > 0.0 .OR. &
1334	rayleigh_damping_height < zu(nzb) ) THEN
1335	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1336	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1337	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1338	ENDIF
1339	ENDIF
1340	ENDIF
1341
1342	!
1343	!-- Check limiters for Upstream-Spline scheme
1344	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1345	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1346	overshoot_limit_e < 0.0 ) THEN
1347	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1348	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1349	ENDIF
1350	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1351	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1352	message_string = 'ups_limit_... < 0.0 is not allowed'
1353	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1354	ENDIF
1355
1356	!
1357	!-- Check number of chosen statistic regions. More than 10 regions are not
1358	!-- allowed, because so far no more than 10 corresponding output files can
1359	!-- be opened (cf. check_open)
1360	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1361	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1362	statistic_regions+1, ' but only 10 regions are allowed'
1363	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1364	ENDIF
1365	IF ( normalizing_region > statistic_regions .OR. &
1366	normalizing_region < 0) THEN
1367	WRITE ( message_string, * ) 'normalizing_region = ', &
1368	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1369	' (value of statistic_regions)'
1370	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1371	ENDIF
1372
1373	!
1374	!-- Check the interval for sorting particles.
1375	!-- Using particles as cloud droplets requires sorting after each timestep.
1376	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1377	dt_sort_particles = 0.0
1378	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1379	'_droplets = .TRUE.'
1380	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1381	ENDIF
1382
1383	!
1384	!-- Set the default intervals for data output, if necessary
1385	!-- NOTE: dt_dosp has already been set in package_parin
1386	IF ( dt_data_output /= 9999999.9 ) THEN
1387	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1388	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1389	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1390	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1391	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1392	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1393	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1394	ENDIF
1395
1396	!
1397	!-- Set the default skip time intervals for data output, if necessary
1398	IF ( skip_time_dopr == 9999999.9 ) &
1399	skip_time_dopr = skip_time_data_output
1400	IF ( skip_time_dosp == 9999999.9 ) &
1401	skip_time_dosp = skip_time_data_output
1402	IF ( skip_time_do2d_xy == 9999999.9 ) &
1403	skip_time_do2d_xy = skip_time_data_output
1404	IF ( skip_time_do2d_xz == 9999999.9 ) &
1405	skip_time_do2d_xz = skip_time_data_output
1406	IF ( skip_time_do2d_yz == 9999999.9 ) &
1407	skip_time_do2d_yz = skip_time_data_output
1408	IF ( skip_time_do3d == 9999999.9 ) &
1409	skip_time_do3d = skip_time_data_output
1410	IF ( skip_time_data_output_av == 9999999.9 ) &
1411	skip_time_data_output_av = skip_time_data_output
1412
1413	!
1414	!-- Check the average intervals (first for 3d-data, then for profiles and
1415	!-- spectra)
1416	IF ( averaging_interval > dt_data_output_av ) THEN
1417	WRITE( message_string, * ) 'averaging_interval = ', &
1418	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1419	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1420	ENDIF
1421
1422	IF ( averaging_interval_pr == 9999999.9 ) THEN
1423	averaging_interval_pr = averaging_interval
1424	ENDIF
1425
1426	IF ( averaging_interval_pr > dt_dopr ) THEN
1427	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1428	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1429	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1430	ENDIF
1431
1432	IF ( averaging_interval_sp == 9999999.9 ) THEN
1433	averaging_interval_sp = averaging_interval
1434	ENDIF
1435
1436	IF ( averaging_interval_sp > dt_dosp ) THEN
1437	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1438	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1439	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1440	ENDIF
1441
1442	!
1443	!-- Set the default interval for profiles entering the temporal average
1444	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1445	dt_averaging_input_pr = dt_averaging_input
1446	ENDIF
1447
1448	!
1449	!-- Set the default interval for the output of timeseries to a reasonable
1450	!-- value (tries to minimize the number of calls of flow_statistics)
1451	IF ( dt_dots == 9999999.9 ) THEN
1452	IF ( averaging_interval_pr == 0.0 ) THEN
1453	dt_dots = MIN( dt_run_control, dt_dopr )
1454	ELSE
1455	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1456	ENDIF
1457	ENDIF
1458
1459	!
1460	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1461	IF ( dt_averaging_input > averaging_interval ) THEN
1462	WRITE( message_string, * ) 'dt_averaging_input = ', &
1463	dt_averaging_input, ' must be <= averaging_interval = ', &
1464	averaging_interval
1465	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1466	ENDIF
1467
1468	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1469	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1470	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1471	averaging_interval_pr
1472	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1473	ENDIF
1474
1475	!
1476	!-- Set the default value for the integration interval of precipitation amount
1477	IF ( precipitation ) THEN
1478	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1479	precipitation_amount_interval = dt_do2d_xy
1480	ELSE
1481	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1482	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1483	precipitation_amount_interval, ' must not be larger than ', &
1484	'dt_do2d_xy = ', dt_do2d_xy
1485	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1486	ENDIF
1487	ENDIF
1488	ENDIF
1489
1490	!
1491	!-- Determine the number of output profiles and check whether they are
1492	!-- permissible
1493	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1494
1495	dopr_n = dopr_n + 1
1496	i = dopr_n
1497
1498	!
1499	!-- Determine internal profile number (for hom, homs)
1500	!-- and store height levels
1501	SELECT CASE ( TRIM( data_output_pr(i) ) )
1502
1503	CASE ( 'u', '#u' )
1504	dopr_index(i) = 1
1505	dopr_unit(i) = 'm/s'
1506	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1507	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1508	dopr_initial_index(i) = 5
1509	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1510	data_output_pr(i) = data_output_pr(i)(2:)
1511	ENDIF
1512
1513	CASE ( 'v', '#v' )
1514	dopr_index(i) = 2
1515	dopr_unit(i) = 'm/s'
1516	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1517	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1518	dopr_initial_index(i) = 6
1519	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1520	data_output_pr(i) = data_output_pr(i)(2:)
1521	ENDIF
1522
1523	CASE ( 'w' )
1524	dopr_index(i) = 3
1525	dopr_unit(i) = 'm/s'
1526	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1527
1528	CASE ( 'pt', '#pt' )
1529	IF ( .NOT. cloud_physics ) THEN
1530	dopr_index(i) = 4
1531	dopr_unit(i) = 'K'
1532	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1533	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1534	dopr_initial_index(i) = 7
1535	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1536	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1537	data_output_pr(i) = data_output_pr(i)(2:)
1538	ENDIF
1539	ELSE
1540	dopr_index(i) = 43
1541	dopr_unit(i) = 'K'
1542	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1543	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1544	dopr_initial_index(i) = 28
1545	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1546	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1547	data_output_pr(i) = data_output_pr(i)(2:)
1548	ENDIF
1549	ENDIF
1550
1551	CASE ( 'e' )
1552	dopr_index(i) = 8
1553	dopr_unit(i) = 'm2/s2'
1554	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1555	hom(nzb,2,8,:) = 0.0
1556
1557	CASE ( 'km', '#km' )
1558	dopr_index(i) = 9
1559	dopr_unit(i) = 'm2/s'
1560	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1561	hom(nzb,2,9,:) = 0.0
1562	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1563	dopr_initial_index(i) = 23
1564	hom(:,2,23,:) = hom(:,2,9,:)
1565	data_output_pr(i) = data_output_pr(i)(2:)
1566	ENDIF
1567
1568	CASE ( 'kh', '#kh' )
1569	dopr_index(i) = 10
1570	dopr_unit(i) = 'm2/s'
1571	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1572	hom(nzb,2,10,:) = 0.0
1573	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1574	dopr_initial_index(i) = 24
1575	hom(:,2,24,:) = hom(:,2,10,:)
1576	data_output_pr(i) = data_output_pr(i)(2:)
1577	ENDIF
1578
1579	CASE ( 'l', '#l' )
1580	dopr_index(i) = 11
1581	dopr_unit(i) = 'm'
1582	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1583	hom(nzb,2,11,:) = 0.0
1584	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1585	dopr_initial_index(i) = 25
1586	hom(:,2,25,:) = hom(:,2,11,:)
1587	data_output_pr(i) = data_output_pr(i)(2:)
1588	ENDIF
1589
1590	CASE ( 'w"u"' )
1591	dopr_index(i) = 12
1592	dopr_unit(i) = 'm2/s2'
1593	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1594	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1595
1596	CASE ( 'wu' )
1597	dopr_index(i) = 13
1598	dopr_unit(i) = 'm2/s2'
1599	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1600
1601	CASE ( 'w"v"' )
1602	dopr_index(i) = 14
1603	dopr_unit(i) = 'm2/s2'
1604	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1605	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1606
1607	CASE ( 'wv' )
1608	dopr_index(i) = 15
1609	dopr_unit(i) = 'm2/s2'
1610	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1611
1612	CASE ( 'w"pt"' )
1613	dopr_index(i) = 16
1614	dopr_unit(i) = 'K m/s'
1615	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1616
1617	CASE ( 'wpt' )
1618	dopr_index(i) = 17
1619	dopr_unit(i) = 'K m/s'
1620	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1621
1622	CASE ( 'wpt' )
1623	dopr_index(i) = 18
1624	dopr_unit(i) = 'K m/s'
1625	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1626
1627	CASE ( 'wu' )
1628	dopr_index(i) = 19
1629	dopr_unit(i) = 'm2/s2'
1630	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1631	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1632
1633	CASE ( 'wv' )
1634	dopr_index(i) = 20
1635	dopr_unit(i) = 'm2/s2'
1636	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1637	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1638
1639	CASE ( 'wptBC' )
1640	dopr_index(i) = 21
1641	dopr_unit(i) = 'K m/s'
1642	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1643
1644	CASE ( 'wptBC' )
1645	dopr_index(i) = 22
1646	dopr_unit(i) = 'K m/s'
1647	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1648
1649	CASE ( 'sa', '#sa' )
1650	IF ( .NOT. ocean ) THEN
1651	message_string = 'data_output_pr = ' // &
1652	TRIM( data_output_pr(i) ) // ' is not imp' // &
1653	'lemented for ocean = .FALSE.'
1654	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1655	ELSE
1656	dopr_index(i) = 23
1657	dopr_unit(i) = 'psu'
1658	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1659	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1660	dopr_initial_index(i) = 26
1661	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1662	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1663	data_output_pr(i) = data_output_pr(i)(2:)
1664	ENDIF
1665	ENDIF
1666
1667	CASE ( 'u*2' )
1668	dopr_index(i) = 30
1669	dopr_unit(i) = 'm2/s2'
1670	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1671
1672	CASE ( 'v*2' )
1673	dopr_index(i) = 31
1674	dopr_unit(i) = 'm2/s2'
1675	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1676
1677	CASE ( 'w*2' )
1678	dopr_index(i) = 32
1679	dopr_unit(i) = 'm2/s2'
1680	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1681
1682	CASE ( 'pt*2' )
1683	dopr_index(i) = 33
1684	dopr_unit(i) = 'K2'
1685	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1686
1687	CASE ( 'e*' )
1688	dopr_index(i) = 34
1689	dopr_unit(i) = 'm2/s2'
1690	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1691
1692	CASE ( 'w2pt' )
1693	dopr_index(i) = 35
1694	dopr_unit(i) = 'K m2/s2'
1695	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1696
1697	CASE ( 'wpt2' )
1698	dopr_index(i) = 36
1699	dopr_unit(i) = 'K2 m/s'
1700	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1701
1702	CASE ( 'we' )
1703	dopr_index(i) = 37
1704	dopr_unit(i) = 'm3/s3'
1705	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1706
1707	CASE ( 'w*3' )
1708	dopr_index(i) = 38
1709	dopr_unit(i) = 'm3/s3'
1710	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1711
1712	CASE ( 'Sw' )
1713	dopr_index(i) = 39
1714	dopr_unit(i) = 'none'
1715	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1716
1717	CASE ( 'p' )
1718	dopr_index(i) = 40
1719	dopr_unit(i) = 'Pa'
1720	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1721
1722	CASE ( 'q', '#q' )
1723	IF ( .NOT. humidity ) THEN
1724	message_string = 'data_output_pr = ' // &
1725	TRIM( data_output_pr(i) ) // ' is not imp' // &
1726	'lemented for humidity = .FALSE.'
1727	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1728	ELSE
1729	dopr_index(i) = 41
1730	dopr_unit(i) = 'kg/kg'
1731	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1732	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1733	dopr_initial_index(i) = 26
1734	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1735	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1736	data_output_pr(i) = data_output_pr(i)(2:)
1737	ENDIF
1738	ENDIF
1739
1740	CASE ( 's', '#s' )
1741	IF ( .NOT. passive_scalar ) THEN
1742	message_string = 'data_output_pr = ' // &
1743	TRIM( data_output_pr(i) ) // ' is not imp' // &
1744	'lemented for passive_scalar = .FALSE.'
1745	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1746	ELSE
1747	dopr_index(i) = 41
1748	dopr_unit(i) = 'kg/m3'
1749	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1750	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1751	dopr_initial_index(i) = 26
1752	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1753	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1754	data_output_pr(i) = data_output_pr(i)(2:)
1755	ENDIF
1756	ENDIF
1757
1758	CASE ( 'qv', '#qv' )
1759	IF ( .NOT. cloud_physics ) THEN
1760	dopr_index(i) = 41
1761	dopr_unit(i) = 'kg/kg'
1762	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1763	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1764	dopr_initial_index(i) = 26
1765	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1766	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1767	data_output_pr(i) = data_output_pr(i)(2:)
1768	ENDIF
1769	ELSE
1770	dopr_index(i) = 42
1771	dopr_unit(i) = 'kg/kg'
1772	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1773	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1774	dopr_initial_index(i) = 27
1775	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1776	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1777	data_output_pr(i) = data_output_pr(i)(2:)
1778	ENDIF
1779	ENDIF
1780
1781	CASE ( 'lpt', '#lpt' )
1782	IF ( .NOT. cloud_physics ) THEN
1783	message_string = 'data_output_pr = ' // &
1784	TRIM( data_output_pr(i) ) // ' is not imp' // &
1785	'lemented for cloud_physics = .FALSE.'
1786	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1787	ELSE
1788	dopr_index(i) = 4
1789	dopr_unit(i) = 'K'
1790	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1791	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1792	dopr_initial_index(i) = 7
1793	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1794	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1795	data_output_pr(i) = data_output_pr(i)(2:)
1796	ENDIF
1797	ENDIF
1798
1799	CASE ( 'vpt', '#vpt' )
1800	dopr_index(i) = 44
1801	dopr_unit(i) = 'K'
1802	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1803	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1804	dopr_initial_index(i) = 29
1805	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1806	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1807	data_output_pr(i) = data_output_pr(i)(2:)
1808	ENDIF
1809
1810	CASE ( 'w"vpt"' )
1811	dopr_index(i) = 45
1812	dopr_unit(i) = 'K m/s'
1813	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1814
1815	CASE ( 'wvpt' )
1816	dopr_index(i) = 46
1817	dopr_unit(i) = 'K m/s'
1818	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1819
1820	CASE ( 'wvpt' )
1821	dopr_index(i) = 47
1822	dopr_unit(i) = 'K m/s'
1823	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1824
1825	CASE ( 'w"q"' )
1826	IF ( .NOT. humidity ) THEN
1827	message_string = 'data_output_pr = ' // &
1828	TRIM( data_output_pr(i) ) // ' is not imp' // &
1829	'lemented for humidity = .FALSE.'
1830	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1831	ELSE
1832	dopr_index(i) = 48
1833	dopr_unit(i) = 'kg/kg m/s'
1834	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1835	ENDIF
1836
1837	CASE ( 'wq' )
1838	IF ( .NOT. humidity ) THEN
1839	message_string = 'data_output_pr = ' // &
1840	TRIM( data_output_pr(i) ) // ' is not imp' // &
1841	'lemented for humidity = .FALSE.'
1842	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1843	ELSE
1844	dopr_index(i) = 49
1845	dopr_unit(i) = 'kg/kg m/s'
1846	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1847	ENDIF
1848
1849	CASE ( 'wq' )
1850	IF ( .NOT. humidity ) THEN
1851	message_string = 'data_output_pr = ' // &
1852	TRIM( data_output_pr(i) ) // ' is not imp' // &
1853	'lemented for humidity = .FALSE.'
1854	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1855	ELSE
1856	dopr_index(i) = 50
1857	dopr_unit(i) = 'kg/kg m/s'
1858	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1859	ENDIF
1860
1861	CASE ( 'w"s"' )
1862	IF ( .NOT. passive_scalar ) THEN
1863	message_string = 'data_output_pr = ' // &
1864	TRIM( data_output_pr(i) ) // ' is not imp' // &
1865	'lemented for passive_scalar = .FALSE.'
1866	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1867	ELSE
1868	dopr_index(i) = 48
1869	dopr_unit(i) = 'kg/m3 m/s'
1870	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1871	ENDIF
1872
1873	CASE ( 'ws' )
1874	IF ( .NOT. passive_scalar ) THEN
1875	message_string = 'data_output_pr = ' // &
1876	TRIM( data_output_pr(i) ) // ' is not imp' // &
1877	'lemented for passive_scalar = .FALSE.'
1878	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1879	ELSE
1880	dopr_index(i) = 49
1881	dopr_unit(i) = 'kg/m3 m/s'
1882	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1883	ENDIF
1884
1885	CASE ( 'ws' )
1886	IF ( .NOT. passive_scalar ) THEN
1887	message_string = 'data_output_pr = ' // &
1888	TRIM( data_output_pr(i) ) // ' is not imp' // &
1889	'lemented for passive_scalar = .FALSE.'
1890	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1891	ELSE
1892	dopr_index(i) = 50
1893	dopr_unit(i) = 'kg/m3 m/s'
1894	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1895	ENDIF
1896
1897	CASE ( 'w"qv"' )
1898	IF ( humidity .AND. .NOT. cloud_physics ) &
1899	THEN
1900	dopr_index(i) = 48
1901	dopr_unit(i) = 'kg/kg m/s'
1902	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1903	ELSEIF( humidity .AND. cloud_physics ) THEN
1904	dopr_index(i) = 51
1905	dopr_unit(i) = 'kg/kg m/s'
1906	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1907	ELSE
1908	message_string = 'data_output_pr = ' // &
1909	TRIM( data_output_pr(i) ) // ' is not imp' // &
1910	'lemented for cloud_physics = .FALSE. an&' // &
1911	'd humidity = .FALSE.'
1912	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1913	ENDIF
1914
1915	CASE ( 'wqv' )
1916	IF ( humidity .AND. .NOT. cloud_physics ) &
1917	THEN
1918	dopr_index(i) = 49
1919	dopr_unit(i) = 'kg/kg m/s'
1920	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1921	ELSEIF( humidity .AND. cloud_physics ) THEN
1922	dopr_index(i) = 52
1923	dopr_unit(i) = 'kg/kg m/s'
1924	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1925	ELSE
1926	message_string = 'data_output_pr = ' // &
1927	TRIM( data_output_pr(i) ) // ' is not imp' // &
1928	'lemented for cloud_physics = .FALSE. an&' // &
1929	'd humidity = .FALSE.'
1930	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1931	ENDIF
1932
1933	CASE ( 'wqv' )
1934	IF ( humidity .AND. .NOT. cloud_physics ) &
1935	THEN
1936	dopr_index(i) = 50
1937	dopr_unit(i) = 'kg/kg m/s'
1938	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1939	ELSEIF( humidity .AND. cloud_physics ) THEN
1940	dopr_index(i) = 53
1941	dopr_unit(i) = 'kg/kg m/s'
1942	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
1943	ELSE
1944	message_string = 'data_output_pr = ' // &
1945	TRIM( data_output_pr(i) ) // ' is not imp' // &
1946	'lemented for cloud_physics = .FALSE. an&' // &
1947	'd humidity = .FALSE.'
1948	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1949	ENDIF
1950
1951	CASE ( 'ql' )
1952	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
1953	message_string = 'data_output_pr = ' // &
1954	TRIM( data_output_pr(i) ) // ' is not imp' // &
1955	'lemented for cloud_physics = .FALSE. or' // &
1956	'&cloud_droplets = .FALSE.'
1957	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
1958	ELSE
1959	dopr_index(i) = 54
1960	dopr_unit(i) = 'kg/kg'
1961	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
1962	ENDIF
1963
1964	CASE ( 'wuu*/dz' )
1965	dopr_index(i) = 55
1966	dopr_unit(i) = 'm2/s3'
1967	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
1968
1969	CASE ( 'wp/dz' )
1970	dopr_index(i) = 56
1971	dopr_unit(i) = 'm2/s3'
1972	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
1973
1974	CASE ( 'w"e/dz' )
1975	dopr_index(i) = 57
1976	dopr_unit(i) = 'm2/s3'
1977	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
1978
1979	CASE ( 'u"pt"' )
1980	dopr_index(i) = 58
1981	dopr_unit(i) = 'K m/s'
1982	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
1983
1984	CASE ( 'upt' )
1985	dopr_index(i) = 59
1986	dopr_unit(i) = 'K m/s'
1987	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
1988
1989	CASE ( 'upt_t' )
1990	dopr_index(i) = 60
1991	dopr_unit(i) = 'K m/s'
1992	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
1993
1994	CASE ( 'v"pt"' )
1995	dopr_index(i) = 61
1996	dopr_unit(i) = 'K m/s'
1997	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
1998
1999	CASE ( 'vpt' )
2000	dopr_index(i) = 62
2001	dopr_unit(i) = 'K m/s'
2002	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2003
2004	CASE ( 'vpt_t' )
2005	dopr_index(i) = 63
2006	dopr_unit(i) = 'K m/s'
2007	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2008
2009	CASE ( 'rho' )
2010	dopr_index(i) = 64
2011	dopr_unit(i) = 'kg/m3'
2012	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2013
2014	CASE ( 'w"sa"' )
2015	IF ( .NOT. ocean ) THEN
2016	message_string = 'data_output_pr = ' // &
2017	TRIM( data_output_pr(i) ) // ' is not imp' // &
2018	'lemented for ocean = .FALSE.'
2019	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2020	ELSE
2021	dopr_index(i) = 65
2022	dopr_unit(i) = 'psu m/s'
2023	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2024	ENDIF
2025
2026	CASE ( 'wsa' )
2027	IF ( .NOT. ocean ) THEN
2028	message_string = 'data_output_pr = ' // &
2029	TRIM( data_output_pr(i) ) // ' is not imp' // &
2030	'lemented for ocean = .FALSE.'
2031	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2032	ELSE
2033	dopr_index(i) = 66
2034	dopr_unit(i) = 'psu m/s'
2035	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2036	ENDIF
2037
2038	CASE ( 'wsa' )
2039	IF ( .NOT. ocean ) THEN
2040	message_string = 'data_output_pr = ' // &
2041	TRIM( data_output_pr(i) ) // ' is not imp' // &
2042	'lemented for ocean = .FALSE.'
2043	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2044	ELSE
2045	dopr_index(i) = 67
2046	dopr_unit(i) = 'psu m/s'
2047	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2048	ENDIF
2049
2050	CASE ( 'wp' )
2051	dopr_index(i) = 68
2052	dopr_unit(i) = 'm3/s3'
2053	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2054
2055	CASE ( 'w"e' )
2056	dopr_index(i) = 69
2057	dopr_unit(i) = 'm3/s3'
2058	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2059
2060	CASE ( 'q*2' )
2061	IF ( .NOT. humidity ) THEN
2062	message_string = 'data_output_pr = ' // &
2063	TRIM( data_output_pr(i) ) // ' is not imp' // &
2064	'lemented for humidity = .FALSE.'
2065	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2066	ELSE
2067	dopr_index(i) = 70
2068	dopr_unit(i) = 'kg2/kg2'
2069	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2070	ENDIF
2071
2072	CASE DEFAULT
2073
2074	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2075
2076	IF ( unit == 'illegal' ) THEN
2077	IF ( data_output_pr_user(1) /= ' ' ) THEN
2078	message_string = 'illegal value for data_output_pr or ' // &
2079	'data_output_pr_user = "' // &
2080	TRIM( data_output_pr(i) ) // '"'
2081	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2082	ELSE
2083	message_string = 'illegal value for data_output_pr = "' // &
2084	TRIM( data_output_pr(i) ) // '"'
2085	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2086	ENDIF
2087	ENDIF
2088
2089	END SELECT
2090	!
2091	!-- Check to which of the predefined coordinate systems the profile belongs
2092	DO k = 1, crmax
2093	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2094	/=0 ) &
2095	THEN
2096	dopr_crossindex(i) = k
2097	EXIT
2098	ENDIF
2099	ENDDO
2100	!
2101	!-- Generate the text for the labels of the PROFIL output file. "-characters
2102	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2103	!-- control characters
2104	dopr_label(i) = data_output_pr(i)
2105	position = INDEX( dopr_label(i) , '"' )
2106	DO WHILE ( position /= 0 )
2107	dopr_label(i)(position:position) = ''''
2108	position = INDEX( dopr_label(i) , '"' )
2109	ENDDO
2110
2111	ENDDO
2112
2113	!
2114	!-- y-value range of the coordinate system (PROFIL).
2115	!-- x-value range determined in plot_1d.
2116	IF ( .NOT. ocean ) THEN
2117	cross_uymin = 0.0
2118	IF ( z_max_do1d == -1.0 ) THEN
2119	cross_uymax = zu(nzt+1)
2120	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2121	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2122	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2123	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2124	ELSE
2125	cross_uymax = z_max_do1d
2126	ENDIF
2127	ENDIF
2128
2129	!
2130	!-- Check whether the chosen normalizing factor for the coordinate systems is
2131	!-- permissible
2132	DO i = 1, crmax
2133	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2134
2135	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2136	j = 0
2137
2138	CASE DEFAULT
2139	message_string = 'unknown normalization method cross_normali' // &
2140	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2141	'"'
2142	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2143
2144	END SELECT
2145	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2146
2147	CASE ( '', 'z_i' )
2148	j = 0
2149
2150	CASE DEFAULT
2151	message_string = 'unknown normalization method cross_normali' // &
2152	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2153	'"'
2154	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2155
2156	END SELECT
2157	ENDDO
2158	!
2159	!-- Check normalized y-value range of the coordinate system (PROFIL)
2160	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2161	THEN
2162	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2163	z_max_do1d_normalized, ' must be >= 0.0'
2164	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2165	ENDIF
2166
2167
2168	!
2169	!-- Append user-defined data output variables to the standard data output
2170	IF ( data_output_user(1) /= ' ' ) THEN
2171	i = 1
2172	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2173	i = i + 1
2174	ENDDO
2175	j = 1
2176	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2177	IF ( i > 100 ) THEN
2178	message_string = 'number of output quantitities given by data' // &
2179	'_output and data_output_user exceeds the limit of 100'
2180	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2181	ENDIF
2182	data_output(i) = data_output_user(j)
2183	i = i + 1
2184	j = j + 1
2185	ENDDO
2186	ENDIF
2187
2188	!
2189	!-- Check and set steering parameters for 2d/3d data output and averaging
2190	i = 1
2191	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2192	!
2193	!-- Check for data averaging
2194	ilen = LEN_TRIM( data_output(i) )
2195	j = 0 ! no data averaging
2196	IF ( ilen > 3 ) THEN
2197	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2198	j = 1 ! data averaging
2199	data_output(i) = data_output(i)(1:ilen-3)
2200	ENDIF
2201	ENDIF
2202	!
2203	!-- Check for cross section or volume data
2204	ilen = LEN_TRIM( data_output(i) )
2205	k = 0 ! 3d data
2206	var = data_output(i)(1:ilen)
2207	IF ( ilen > 3 ) THEN
2208	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2209	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2210	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2211	k = 1 ! 2d data
2212	var = data_output(i)(1:ilen-3)
2213	ENDIF
2214	ENDIF
2215	!
2216	!-- Check for allowed value and set units
2217	SELECT CASE ( TRIM( var ) )
2218
2219	CASE ( 'e' )
2220	IF ( constant_diffusion ) THEN
2221	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2222	'res constant_diffusion = .FALSE.'
2223	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2224	ENDIF
2225	unit = 'm2/s2'
2226
2227	CASE ( 'pc', 'pr' )
2228	IF ( .NOT. particle_advection ) THEN
2229	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2230	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2231	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2232	ENDIF
2233	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2234	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2235
2236	CASE ( 'q', 'vpt' )
2237	IF ( .NOT. humidity ) THEN
2238	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2239	'res humidity = .TRUE.'
2240	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2241	ENDIF
2242	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2243	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2244
2245	CASE ( 'ql' )
2246	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2247	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2248	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2249	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2250	ENDIF
2251	unit = 'kg/kg'
2252
2253	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2254	IF ( .NOT. cloud_droplets ) THEN
2255	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2256	'res cloud_droplets = .TRUE.'
2257	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2258	ENDIF
2259	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2260	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2261	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2262
2263	CASE ( 'qv' )
2264	IF ( .NOT. cloud_physics ) THEN
2265	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2266	'res cloud_physics = .TRUE.'
2267	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2268	ENDIF
2269	unit = 'kg/kg'
2270
2271	CASE ( 'rho' )
2272	IF ( .NOT. ocean ) THEN
2273	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2274	'res ocean = .TRUE.'
2275	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2276	ENDIF
2277	unit = 'kg/m3'
2278
2279	CASE ( 's' )
2280	IF ( .NOT. passive_scalar ) THEN
2281	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2282	'res passive_scalar = .TRUE.'
2283	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2284	ENDIF
2285	unit = 'conc'
2286
2287	CASE ( 'sa' )
2288	IF ( .NOT. ocean ) THEN
2289	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2290	'res ocean = .TRUE.'
2291	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2292	ENDIF
2293	unit = 'psu'
2294
2295	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2296	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2297	message_string = 'illegal value for data_output: "' // &
2298	TRIM( var ) // '" & only 2d-horizontal ' // &
2299	'cross sections are allowed for this value'
2300	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2301	ENDIF
2302	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2303	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2304	'res cloud_physics = .TRUE.'
2305	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2306	ENDIF
2307	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2308	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2309	'res precipitation = .TRUE.'
2310	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2311	ENDIF
2312	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2313	message_string = 'temporal averaging of precipitation ' // &
2314	'amount "' // TRIM( var ) // '" is not possible'
2315	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2316	ENDIF
2317	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2318	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2319	'res precipitation = .TRUE.'
2320	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2321	ENDIF
2322
2323
2324	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2325	IF ( TRIM( var ) == 't*' ) unit = 'K'
2326	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2327	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2328	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2329	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2330
2331	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2332	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2333	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2334	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2335	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2336	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2337	CONTINUE
2338
2339	CASE DEFAULT
2340	CALL user_check_data_output( var, unit )
2341
2342	IF ( unit == 'illegal' ) THEN
2343	IF ( data_output_user(1) /= ' ' ) THEN
2344	message_string = 'illegal value for data_output or ' // &
2345	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2346	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2347	ELSE
2348	message_string = 'illegal value for data_output =' // &
2349	TRIM( data_output(i) ) // '"'
2350	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2351	ENDIF
2352	ENDIF
2353
2354	END SELECT
2355	!
2356	!-- Set the internal steering parameters appropriately
2357	IF ( k == 0 ) THEN
2358	do3d_no(j) = do3d_no(j) + 1
2359	do3d(j,do3d_no(j)) = data_output(i)
2360	do3d_unit(j,do3d_no(j)) = unit
2361	ELSE
2362	do2d_no(j) = do2d_no(j) + 1
2363	do2d(j,do2d_no(j)) = data_output(i)
2364	do2d_unit(j,do2d_no(j)) = unit
2365	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2366	data_output_xy(j) = .TRUE.
2367	ENDIF
2368	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2369	data_output_xz(j) = .TRUE.
2370	ENDIF
2371	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2372	data_output_yz(j) = .TRUE.
2373	ENDIF
2374	ENDIF
2375
2376	IF ( j == 1 ) THEN
2377	!
2378	!-- Check, if variable is already subject to averaging
2379	found = .FALSE.
2380	DO k = 1, doav_n
2381	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2382	ENDDO
2383
2384	IF ( .NOT. found ) THEN
2385	doav_n = doav_n + 1
2386	doav(doav_n) = var
2387	ENDIF
2388	ENDIF
2389
2390	i = i + 1
2391	ENDDO
2392
2393	!
2394	!-- Store sectional planes in one shared array
2395	section(:,1) = section_xy
2396	section(:,2) = section_xz
2397	section(:,3) = section_yz
2398
2399	!
2400	!-- Upper plot limit (grid point value) for 1D profiles
2401	IF ( z_max_do1d == -1.0 ) THEN
2402	nz_do1d = nzt+1
2403	ELSE
2404	DO k = nzb+1, nzt+1
2405	nz_do1d = k
2406	IF ( zw(k) > z_max_do1d ) EXIT
2407	ENDDO
2408	ENDIF
2409
2410	!
2411	!-- Upper plot limit for 2D vertical sections
2412	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2413	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2414	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2415	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2416	' (zu(nzt))'
2417	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2418	ENDIF
2419
2420	!
2421	!-- Upper plot limit for 3D arrays
2422	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2423
2424	!
2425	!-- Determine and check accuracy for compressed 3D plot output
2426	IF ( do3d_compress ) THEN
2427	!
2428	!-- Compression only permissible on T3E machines
2429	IF ( host(1:3) /= 't3e' ) THEN
2430	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2431	TRIM( host ) // '"'
2432	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2433	ENDIF
2434
2435	i = 1
2436	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2437
2438	ilen = LEN_TRIM( do3d_comp_prec(i) )
2439	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2440	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2441	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2442	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2443	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2444	ENDIF
2445
2446	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2447	var = do3d_comp_prec(i)(1:ilen-1)
2448
2449	SELECT CASE ( var )
2450
2451	CASE ( 'u' )
2452	j = 1
2453	CASE ( 'v' )
2454	j = 2
2455	CASE ( 'w' )
2456	j = 3
2457	CASE ( 'p' )
2458	j = 4
2459	CASE ( 'pt' )
2460	j = 5
2461
2462	CASE DEFAULT
2463	WRITE( message_string, * ) 'unknown variable "', &
2464	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2465	i, ')'
2466	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2467
2468	END SELECT
2469
2470	plot_3d_precision(j)%precision = prec
2471	i = i + 1
2472
2473	ENDDO
2474	ENDIF
2475
2476	!
2477	!-- Check the data output format(s)
2478	IF ( data_output_format(1) == ' ' ) THEN
2479	!
2480	!-- Default value
2481	netcdf_output = .TRUE.
2482	ELSE
2483	i = 1
2484	DO WHILE ( data_output_format(i) /= ' ' )
2485
2486	SELECT CASE ( data_output_format(i) )
2487
2488	CASE ( 'netcdf' )
2489	netcdf_output = .TRUE.
2490	CASE ( 'iso2d' )
2491	iso2d_output = .TRUE.
2492	CASE ( 'profil' )
2493	profil_output = .TRUE.
2494	CASE ( 'avs' )
2495	avs_output = .TRUE.
2496
2497	CASE DEFAULT
2498	message_string = 'unknown value for data_output_format "' // &
2499	TRIM( data_output_format(i) ) // '"'
2500	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2501
2502	END SELECT
2503
2504	i = i + 1
2505	IF ( i > 10 ) EXIT
2506
2507	ENDDO
2508
2509	ENDIF
2510
2511	!
2512	!-- Check netcdf precison
2513	ldum = .FALSE.
2514	CALL define_netcdf_header( 'ch', ldum, 0 )
2515
2516	!
2517	!-- Check, whether a constant diffusion coefficient shall be used
2518	IF ( km_constant /= -1.0 ) THEN
2519	IF ( km_constant < 0.0 ) THEN
2520	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2521	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2522	ELSE
2523	IF ( prandtl_number < 0.0 ) THEN
2524	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2525	' < 0.0'
2526	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2527	ENDIF
2528	constant_diffusion = .TRUE.
2529
2530	IF ( prandtl_layer ) THEN
2531	message_string = 'prandtl_layer is not allowed with fixed ' // &
2532	'value of km'
2533	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2534	ENDIF
2535	ENDIF
2536	ENDIF
2537
2538	!
2539	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2540	!-- for the horizontal diffusivity used within the outflow damping layer,
2541	!-- and check/set the width of the damping layer
2542	IF ( bc_lr /= 'cyclic' ) THEN
2543	IF ( km_damp_max == -1.0 ) THEN
2544	km_damp_max = 0.5 * dx
2545	ENDIF
2546	IF ( outflow_damping_width == -1.0 ) THEN
2547	outflow_damping_width = MIN( 20, nx/2 )
2548	ENDIF
2549	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2550	message_string = 'outflow_damping width out of range'
2551	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2552	ENDIF
2553	ENDIF
2554
2555	IF ( bc_ns /= 'cyclic' ) THEN
2556	IF ( km_damp_max == -1.0 ) THEN
2557	km_damp_max = 0.5 * dy
2558	ENDIF
2559	IF ( outflow_damping_width == -1.0 ) THEN
2560	outflow_damping_width = MIN( 20, ny/2 )
2561	ENDIF
2562	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2563	message_string = 'outflow_damping width out of range'
2564	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2565	ENDIF
2566	ENDIF
2567
2568	!
2569	!-- Check value range for rif
2570	IF ( rif_min >= rif_max ) THEN
2571	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2572	'than rif_max = ', rif_max
2573	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2574	ENDIF
2575
2576	!
2577	!-- Determine upper and lower hight level indices for random perturbations
2578	IF ( disturbance_level_b == -9999999.9 ) THEN
2579	IF ( ocean ) THEN
2580	disturbance_level_b = zu((nzt*2)/3)
2581	disturbance_level_ind_b = ( nzt * 2 ) / 3
2582	ELSE
2583	disturbance_level_b = zu(nzb+3)
2584	disturbance_level_ind_b = nzb + 3
2585	ENDIF
2586	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2587	WRITE( message_string, * ) 'disturbance_level_b = ', &
2588	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2589	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2590	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2591	WRITE( message_string, * ) 'disturbance_level_b = ', &
2592	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2593	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2594	ELSE
2595	DO k = 3, nzt-2
2596	IF ( disturbance_level_b <= zu(k) ) THEN
2597	disturbance_level_ind_b = k
2598	EXIT
2599	ENDIF
2600	ENDDO
2601	ENDIF
2602
2603	IF ( disturbance_level_t == -9999999.9 ) THEN
2604	IF ( ocean ) THEN
2605	disturbance_level_t = zu(nzt-3)
2606	disturbance_level_ind_t = nzt - 3
2607	ELSE
2608	disturbance_level_t = zu(nzt/3)
2609	disturbance_level_ind_t = nzt / 3
2610	ENDIF
2611	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2612	WRITE( message_string, * ) 'disturbance_level_t = ', &
2613	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2614	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2615	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2616	WRITE( message_string, * ) 'disturbance_level_t = ', &
2617	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2618	disturbance_level_b
2619	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2620	ELSE
2621	DO k = 3, nzt-2
2622	IF ( disturbance_level_t <= zu(k) ) THEN
2623	disturbance_level_ind_t = k
2624	EXIT
2625	ENDIF
2626	ENDDO
2627	ENDIF
2628
2629	!
2630	!-- Check again whether the levels determined this way are ok.
2631	!-- Error may occur at automatic determination and too few grid points in
2632	!-- z-direction.
2633	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2634	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2635	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2636	disturbance_level_b
2637	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2638	ENDIF
2639
2640	!
2641	!-- Determine the horizontal index range for random perturbations.
2642	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2643	!-- near the inflow and the perturbation area is further limited to ...(1)
2644	!-- after the initial phase of the flow.
2645	dist_nxl = 0; dist_nxr = nx
2646	dist_nys = 0; dist_nyn = ny
2647	IF ( bc_lr /= 'cyclic' ) THEN
2648	IF ( inflow_disturbance_begin == -1 ) THEN
2649	inflow_disturbance_begin = MIN( 10, nx/2 )
2650	ENDIF
2651	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2652	THEN
2653	message_string = 'inflow_disturbance_begin out of range'
2654	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2655	ENDIF
2656	IF ( inflow_disturbance_end == -1 ) THEN
2657	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2658	ENDIF
2659	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2660	THEN
2661	message_string = 'inflow_disturbance_end out of range'
2662	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2663	ENDIF
2664	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2665	IF ( inflow_disturbance_begin == -1 ) THEN
2666	inflow_disturbance_begin = MIN( 10, ny/2 )
2667	ENDIF
2668	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2669	THEN
2670	message_string = 'inflow_disturbance_begin out of range'
2671	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2672	ENDIF
2673	IF ( inflow_disturbance_end == -1 ) THEN
2674	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2675	ENDIF
2676	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2677	THEN
2678	message_string = 'inflow_disturbance_end out of range'
2679	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2680	ENDIF
2681	ENDIF
2682
2683	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2684	dist_nxr = nx - inflow_disturbance_begin
2685	dist_nxl(1) = nx - inflow_disturbance_end
2686	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2687	dist_nxl = inflow_disturbance_begin
2688	dist_nxr(1) = inflow_disturbance_end
2689	ENDIF
2690	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2691	dist_nyn = ny - inflow_disturbance_begin
2692	dist_nys(1) = ny - inflow_disturbance_end
2693	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2694	dist_nys = inflow_disturbance_begin
2695	dist_nyn(1) = inflow_disturbance_end
2696	ENDIF
2697
2698	!
2699	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2700	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2701	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2702	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2703	'condition at the inflow boundary'
2704	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2705	ENDIF
2706
2707	!
2708	!-- In case of turbulent inflow calculate the index of the recycling plane
2709	IF ( turbulent_inflow ) THEN
2710	IF ( recycling_width == 9999999.9 ) THEN
2711	!
2712	!-- Set the default value for the width of the recycling domain
2713	recycling_width = 0.1 * nx * dx
2714	ELSE
2715	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2716	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2717	' ', recycling_width
2718	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2719	ENDIF
2720	ENDIF
2721	!
2722	!-- Calculate the index
2723	recycling_plane = recycling_width / dx
2724	ENDIF
2725
2726	!
2727	!-- Check random generator
2728	IF ( random_generator /= 'system-specific' .AND. &
2729	random_generator /= 'numerical-recipes' ) THEN
2730	message_string = 'unknown random generator: random_generator = "' // &
2731	TRIM( random_generator ) // '"'
2732	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2733	ENDIF
2734
2735	!
2736	!-- Determine damping level index for 1D model
2737	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2738	IF ( damp_level_1d == -1.0 ) THEN
2739	damp_level_1d = zu(nzt+1)
2740	damp_level_ind_1d = nzt + 1
2741	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2742	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2743	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2744	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2745	ELSE
2746	DO k = 1, nzt+1
2747	IF ( damp_level_1d <= zu(k) ) THEN
2748	damp_level_ind_1d = k
2749	EXIT
2750	ENDIF
2751	ENDDO
2752	ENDIF
2753	ENDIF
2754
2755	!
2756	!-- Check some other 1d-model parameters
2757	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2758	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2759	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2760	'" is unknown'
2761	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2762	ENDIF
2763	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2764	TRIM( dissipation_1d ) /= 'detering' ) THEN
2765	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2766	'" is unknown'
2767	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2768	ENDIF
2769
2770	!
2771	!-- Set time for the next user defined restart (time_restart is the
2772	!-- internal parameter for steering restart events)
2773	IF ( restart_time /= 9999999.9 ) THEN
2774	IF ( restart_time > simulated_time ) time_restart = restart_time
2775	ELSE
2776	!
2777	!-- In case of a restart run, set internal parameter to default (no restart)
2778	!-- if the NAMELIST-parameter restart_time is omitted
2779	time_restart = 9999999.9
2780	ENDIF
2781
2782	!
2783	!-- Set default value of the time needed to terminate a model run
2784	IF ( termination_time_needed == -1.0 ) THEN
2785	IF ( host(1:3) == 'ibm' ) THEN
2786	termination_time_needed = 300.0
2787	ELSE
2788	termination_time_needed = 35.0
2789	ENDIF
2790	ENDIF
2791
2792	!
2793	!-- Check the time needed to terminate a model run
2794	IF ( host(1:3) == 't3e' ) THEN
2795	!
2796	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2797	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2798	IF ( termination_time_needed <= 30.0 ) THEN
2799	WRITE( message_string, * ) 'termination_time_needed = ', &
2800	termination_time_needed, ' must be > 30.0 on host "', &
2801	TRIM( host ), '"'
2802	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
2803	ENDIF
2804	ELSEIF ( host(1:3) == 'ibm' ) THEN
2805	!
2806	!-- On IBM-regatta machines the time should be at least 300 seconds,
2807	!-- because the job time consumed before executing palm (for compiling,
2808	!-- copying of files, etc.) has to be regarded
2809	IF ( termination_time_needed < 300.0 ) THEN
2810	WRITE( message_string, * ) 'termination_time_needed = ', &
2811	termination_time_needed, ' should be >= 300.0 on host "', &
2812	TRIM( host ), '"'
2813	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
2814	ENDIF
2815	ENDIF
2816
2817	!
2818	!-- Check &userpar parameters
2819	CALL user_check_parameters
2820
2821
2822	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |