Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 127

Last change on this file since 127 was 121, checked in by raasch, 17 years ago
Bugfix in calculation of u_init and v_init for ocean runs
Property svn:keywords set to `Id`
File size: 109.6 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Multigrid solver allows topography, checking of dt_sort_particles
7	! Bugfix: initializing u_init and v_init in case of ocean runs
8	!
9	! Former revisions:
10	! -----------------
11	! $Id: check_parameters.f90 121 2007-10-18 19:24:23Z letzel $
12	!
13	! 109 2007-08-28 15:26:47Z letzel
14	! Check coupling_mode and set default (obligatory) values (like boundary
15	! conditions for temperature and fluxes) in case of coupled runs.
16	! +profiles for wp and w"e
17	! Bugfix: Error message concerning output of particle concentration (pc)
18	! modified
19	! More checks and more default values for coupled runs
20	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
21	! cloud_physics = .T.)
22	! Rayleigh damping for ocean fixed.
23	! Check and, if necessary, set default value for dt_coupling
24	!
25	! 97 2007-06-21 08:23:15Z raasch
26	! Initial salinity profile is calculated, salinity boundary conditions are
27	! checked,
28	! z_max_do1d is checked only in case of ocean = .f.,
29	! +initial temperature and geostrophic velocity profiles for the ocean version,
30	! use_pt_reference renamed use_reference
31	!
32	! 89 2007-05-25 12:08:31Z raasch
33	! Check for user-defined profiles
34	!
35	! 75 2007-03-22 09:54:05Z raasch
36	! "by_user" allowed as initializing action, -data_output_ts,
37	! leapfrog with non-flat topography not allowed any more, loop_optimization
38	! and pt_reference are checked, moisture renamed humidity,
39	! output of precipitation amount/rate and roughnes length + check
40	! possible negative humidities are avoided in initial profile,
41	! dirichlet/neumann changed to dirichlet/radiation, etc.,
42	! revision added to run_description_header
43	!
44	! 20 2007-02-26 00:12:32Z raasch
45	! Temperature and humidity gradients at top are now calculated for nzt+1,
46	! top_heatflux and respective boundary condition bc_pt_t is checked
47	!
48	! RCS Log replace by Id keyword, revision history cleaned up
49	!
50	! Revision 1.61 2006/08/04 14:20:25 raasch
51	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
52	! use_upstream_for_tke, default value for dt_dopts,
53	! generation of file header moved from routines palm and header to here
54	!
55	! Revision 1.1 1997/08/26 06:29:23 raasch
56	! Initial revision
57	!
58	!
59	! Description:
60	! ------------
61	! Check control parameters and deduce further quantities.
62	!------------------------------------------------------------------------------!
63
64	USE arrays_3d
65	USE constants
66	USE control_parameters
67	USE grid_variables
68	USE indices
69	USE model_1d
70	USE netcdf_control
71	USE particle_attributes
72	USE pegrid
73	USE profil_parameter
74	USE statistics
75	USE transpose_indices
76
77	IMPLICIT NONE
78
79	CHARACTER (LEN=1) :: sq
80	CHARACTER (LEN=6) :: var
81	CHARACTER (LEN=7) :: unit
82	CHARACTER (LEN=8) :: date
83	CHARACTER (LEN=10) :: time
84	CHARACTER (LEN=40) :: coupling_string
85	CHARACTER (LEN=100) :: action
86
87	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
88	position, prec
89	LOGICAL :: found, ldum
90	REAL :: gradient, maxn, maxp, remote = 0.0
91
92	!
93	!-- Warning, if host is not set
94	IF ( host(1:1) == ' ' ) THEN
95	IF ( myid == 0 ) THEN
96	PRINT*, '+++ WARNING: check_parameters:'
97	PRINT*, ' "host" is not set. Please check that environment', &
98	' variable "localhost"'
99	PRINT*, ' is set before running PALM'
100	ENDIF
101	ENDIF
102
103	!
104	!-- Check the coupling mode
105	IF ( coupling_mode /= 'uncoupled' .AND. &
106	coupling_mode /= 'atmosphere_to_ocean' .AND. &
107	coupling_mode /= 'ocean_to_atmosphere' ) THEN
108	IF ( myid == 0 ) THEN
109	PRINT*, '+++ check_parameters:'
110	PRINT*, ' illegal coupling mode: ', TRIM( coupling_mode )
111	ENDIF
112	CALL local_stop
113	ENDIF
114
115	!
116	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
117	IF ( coupling_mode /= 'uncoupled' ) THEN
118	IF ( dt_coupling == 9999999.9 ) THEN
119	IF ( myid == 0 ) THEN
120	PRINT*, '+++ check_parameters:'
121	PRINT*, ' dt_coupling is not set but required for coupling ', &
122	'mode: ', TRIM( coupling_mode )
123	ENDIF
124	CALL local_stop
125	ENDIF
126	#if defined( __parallel ) && defined( __mpi2 )
127	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, myid, 11, comm_inter, ierr )
128	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 11, comm_inter, status, ierr )
129	IF ( dt_coupling /= remote ) THEN
130	IF ( myid == 0 ) THEN
131	PRINT*, '+++ check_parameters:'
132	PRINT*, ' TRIM( coupling_mode ): dt_coupling = ', dt_coupling
133	PRINT*, ' is not equal to dt_coupling_remote = ', remote
134	ENDIF
135	CALL local_stop
136	ENDIF
137	IF ( dt_coupling <= 0.0 ) THEN
138	CALL MPI_SEND( dt_max, 1, MPI_REAL, myid, 19, comm_inter, ierr )
139	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 19, comm_inter, status, &
140	ierr )
141	dt_coupling = MAX( dt_max, remote )
142	IF ( myid == 0 ) THEN
143	PRINT*, '+++ check_parameters:'
144	PRINT*, ' TRIM( coupling_mode ): dt_coupling <= 0.0'
145	PRINT*, ' is not allowed and is reset to MAX(dt_max(A,O)) = ', &
146	dt_coupling
147	ENDIF
148	ENDIF
149	CALL MPI_SEND( restart_time, 1, MPI_REAL, myid, 12, comm_inter, ierr )
150	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 12, comm_inter, status, ierr )
151	IF ( restart_time /= remote ) THEN
152	IF ( myid == 0 ) THEN
153	PRINT*, '+++ check_parameters:'
154	PRINT*, ' TRIM( coupling_mode ): restart_time = ', restart_time
155	PRINT*, ' is not equal to restart_time_remote = ', remote
156	ENDIF
157	CALL local_stop
158	ENDIF
159	CALL MPI_SEND( dt_restart, 1, MPI_REAL, myid, 13, comm_inter, ierr )
160	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 13, comm_inter, status, ierr )
161	IF ( dt_restart /= remote ) THEN
162	IF ( myid == 0 ) THEN
163	PRINT*, '+++ check_parameters:'
164	PRINT*, ' TRIM( coupling_mode ): dt_restart = ', dt_restart
165	PRINT*, ' is not equal to dt_restart_remote = ', remote
166	ENDIF
167	CALL local_stop
168	ENDIF
169	CALL MPI_SEND( end_time, 1, MPI_REAL, myid, 14, comm_inter, ierr )
170	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 14, comm_inter, status, ierr )
171	IF ( end_time /= remote ) THEN
172	IF ( myid == 0 ) THEN
173	PRINT*, '+++ check_parameters:'
174	PRINT*, ' TRIM( coupling_mode ): end_time = ', end_time
175	PRINT*, ' is not equal to end_time_remote = ', remote
176	ENDIF
177	CALL local_stop
178	ENDIF
179	CALL MPI_SEND( dx, 1, MPI_REAL, myid, 15, comm_inter, ierr )
180	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 15, comm_inter, status, ierr )
181	IF ( dx /= remote ) THEN
182	IF ( myid == 0 ) THEN
183	PRINT*, '+++ check_parameters:'
184	PRINT*, ' TRIM( coupling_mode ): dx = ', dx
185	PRINT*, ' is not equal to dx_remote = ', remote
186	ENDIF
187	CALL local_stop
188	ENDIF
189	CALL MPI_SEND( dy, 1, MPI_REAL, myid, 16, comm_inter, ierr )
190	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 16, comm_inter, status, ierr )
191	IF ( dy /= remote ) THEN
192	IF ( myid == 0 ) THEN
193	PRINT*, '+++ check_parameters:'
194	PRINT*, ' TRIM( coupling_mode ): dy = ', dy
195	PRINT*, ' is not equal to dy_remote = ', remote
196	ENDIF
197	CALL local_stop
198	ENDIF
199	CALL MPI_SEND( nx, 1, MPI_INTEGER, myid, 17, comm_inter, ierr )
200	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 17, comm_inter, status, &
201	ierr )
202	IF ( nx /= iremote ) THEN
203	IF ( myid == 0 ) THEN
204	PRINT*, '+++ check_parameters:'
205	PRINT*, ' TRIM( coupling_mode ): nx = ', nx
206	PRINT*, ' is not equal to nx_remote = ', iremote
207	ENDIF
208	CALL local_stop
209	ENDIF
210	CALL MPI_SEND( ny, 1, MPI_INTEGER, myid, 18, comm_inter, ierr )
211	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 18, comm_inter, status, &
212	ierr )
213	IF ( ny /= iremote ) THEN
214	IF ( myid == 0 ) THEN
215	PRINT*, '+++ check_parameters:'
216	PRINT*, ' TRIM( coupling_mode ): ny = ', ny
217	PRINT*, ' is not equal to ny_remote = ', iremote
218	ENDIF
219	CALL local_stop
220	ENDIF
221	#endif
222	ENDIF
223
224	#if defined( __parallel ) && defined( __mpi2 )
225	!
226	!-- Exchange via intercommunicator
227	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
228	CALL MPI_SEND( humidity, &
229	1, MPI_LOGICAL, myid, 19, comm_inter, ierr )
230	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
231	CALL MPI_RECV( humidity_remote, &
232	1, MPI_LOGICAL, myid, 19, comm_inter, status, ierr )
233	ENDIF
234	#endif
235
236
237	!
238	!-- Generate the file header which is used as a header for most of PALM's
239	!-- output files
240	CALL DATE_AND_TIME( date, time )
241	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
242	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
243	IF ( coupling_mode == 'uncoupled' ) THEN
244	coupling_string = ''
245	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
246	coupling_string = ' coupled (atmosphere)'
247	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
248	coupling_string = ' coupled (ocean)'
249	ENDIF
250
251	WRITE ( run_description_header, &
252	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
253	TRIM( version ), TRIM( revision ), 'run: ', &
254	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
255	'host: ', TRIM( host ), run_date, run_time
256
257	!
258	!-- Check the general loop optimization method
259	IF ( loop_optimization == 'default' ) THEN
260	IF ( host(1:3) == 'nec' ) THEN
261	loop_optimization = 'vector'
262	ELSE
263	loop_optimization = 'cache'
264	ENDIF
265	ENDIF
266	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
267	.AND. loop_optimization /= 'vector' ) THEN
268	IF ( myid == 0 ) THEN
269	PRINT*, '+++ check_parameters:'
270	PRINT*, ' illegal value given for loop_optimization: ', &
271	TRIM( loop_optimization )
272	ENDIF
273	CALL local_stop
274	ENDIF
275
276	!
277	!-- Check topography setting (check for illegal parameter combinations)
278	IF ( topography /= 'flat' ) THEN
279	action = ' '
280	IF ( scalar_advec /= 'pw-scheme' ) THEN
281	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
282	ENDIF
283	IF ( momentum_advec /= 'pw-scheme' ) THEN
284	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
285	ENDIF
286	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
287	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
288	ENDIF
289	IF ( psolver == 'sor' ) THEN
290	WRITE( action, '(A,A)' ) 'psolver = ', psolver
291	ENDIF
292	IF ( sloping_surface ) THEN
293	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
294	ENDIF
295	IF ( galilei_transformation ) THEN
296	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
297	ENDIF
298	IF ( cloud_physics ) THEN
299	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
300	ENDIF
301	IF ( cloud_droplets ) THEN
302	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
303	ENDIF
304	IF ( humidity ) THEN
305	WRITE( action, '(A)' ) 'humidity = .TRUE.'
306	ENDIF
307	IF ( .NOT. prandtl_layer ) THEN
308	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
309	ENDIF
310	IF ( action /= ' ' ) THEN
311	IF ( myid == 0 ) THEN
312	PRINT*, '+++ check_parameters:'
313	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
314	ENDIF
315	CALL local_stop
316	ENDIF
317	ENDIF
318
319	!
320	!-- Check ocean setting
321	IF ( ocean ) THEN
322	action = ' '
323	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
324	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
325	ENDIF
326	IF ( momentum_advec == 'ups-scheme' ) THEN
327	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
328	ENDIF
329	IF ( action /= ' ' ) THEN
330	IF ( myid == 0 ) THEN
331	PRINT*, '+++ check_parameters:'
332	PRINT*, ' ocean = .T. does not allow ', TRIM( action )
333	ENDIF
334	CALL local_stop
335	ENDIF
336	ENDIF
337
338	!
339	!-- Check whether there are any illegal values
340	!-- Pressure solver:
341	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
342	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
343	IF ( myid == 0 ) THEN
344	PRINT*, '+++ check_parameters:'
345	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
346	psolver
347	ENDIF
348	CALL local_stop
349	ENDIF
350
351	#if defined( __parallel )
352	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
353	IF ( myid == 0 ) THEN
354	PRINT*, '+++ check_parameters:'
355	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
356	'1d domain-decomposition along x'
357	PRINT*, ' please do not set npey/=1 in the parameter file'
358	ENDIF
359	CALL local_stop
360	ENDIF
361	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
362	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
363	IF ( myid == 0 ) THEN
364	PRINT*, '+++ check_parameters:'
365	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
366	'subdomains with unequal size'
367	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
368	' file'
369	ENDIF
370	CALL local_stop
371	ENDIF
372	#else
373	IF ( psolver == 'poisfft_hybrid' ) THEN
374	IF ( myid == 0 ) THEN
375	PRINT*, '+++ check_parameters:'
376	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
377	'parallel environment'
378	ENDIF
379	CALL local_stop
380	ENDIF
381	#endif
382
383	IF ( psolver == 'multigrid' ) THEN
384	IF ( cycle_mg == 'w' ) THEN
385	gamma_mg = 2
386	ELSEIF ( cycle_mg == 'v' ) THEN
387	gamma_mg = 1
388	ELSE
389	IF ( myid == 0 ) THEN
390	PRINT*, '+++ check_parameters:'
391	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
392	ENDIF
393	CALL local_stop
394	ENDIF
395	ENDIF
396
397	IF ( fft_method /= 'singleton-algorithm' .AND. &
398	fft_method /= 'temperton-algorithm' .AND. &
399	fft_method /= 'system-specific' ) THEN
400	IF ( myid == 0 ) THEN
401	PRINT*, '+++ check_parameters:'
402	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
403	ENDIF
404	CALL local_stop
405	ENDIF
406
407	!
408	!-- Advection schemes:
409	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
410	THEN
411	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
412	'scheme: momentum_advec=', momentum_advec
413	CALL local_stop
414	ENDIF
415	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
416	.AND. timestep_scheme /= 'euler' ) THEN
417	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
418	momentum_advec, ' is not allowed with ', &
419	'timestep_scheme=', timestep_scheme
420	CALL local_stop
421	ENDIF
422
423	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
424	scalar_advec /= 'ups-scheme' ) THEN
425	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
426	'scheme: scalar_advec=', scalar_advec
427	CALL local_stop
428	ENDIF
429
430	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
431	use_upstream_for_tke = .TRUE.
432	IF ( myid == 0 ) THEN
433	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
434	'.TRUE. because use_sgs_for_particles = .TRUE.'
435	ENDIF
436	ENDIF
437
438	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
439	IF ( myid == 0 ) THEN
440	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
441	'not allowed with timestep_scheme=', timestep_scheme
442	ENDIF
443	CALL local_stop
444	ENDIF
445
446	!
447	!-- Timestep schemes:
448	SELECT CASE ( TRIM( timestep_scheme ) )
449
450	CASE ( 'euler' )
451	intermediate_timestep_count_max = 1
452	asselin_filter_factor = 0.0
453
454	CASE ( 'leapfrog', 'leapfrog+euler' )
455	intermediate_timestep_count_max = 1
456
457	CASE ( 'runge-kutta-2' )
458	intermediate_timestep_count_max = 2
459	asselin_filter_factor = 0.0
460
461	CASE ( 'runge-kutta-3' )
462	intermediate_timestep_count_max = 3
463	asselin_filter_factor = 0.0
464
465	CASE DEFAULT
466	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
467	'scheme: timestep_scheme=', timestep_scheme
468	CALL local_stop
469
470	END SELECT
471
472	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
473	THEN
474	IF ( myid == 0 ) THEN
475	PRINT*, '+++ check_parameters: scalar advection scheme "', &
476	TRIM( scalar_advec ), '"'
477	PRINT*, ' does not work with timestep_scheme "', &
478	TRIM( timestep_scheme ), '"'
479	ENDIF
480	CALL local_stop
481	ENDIF
482
483	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
484	THEN
485	IF ( myid == 0 ) THEN
486	PRINT*, '+++ check_parameters: momentum advection scheme "', &
487	TRIM( momentum_advec ), '"'
488	PRINT*, ' does not work with timestep_scheme "', &
489	TRIM( timestep_scheme ), '"'
490	ENDIF
491	CALL local_stop
492	ENDIF
493
494
495	IF ( initializing_actions == ' ' ) THEN
496	IF ( myid == 0 ) THEN
497	PRINT*, '+++ check parameters:'
498	PRINT*, ' no value found for initializing_actions'
499	ENDIF
500	CALL local_stop
501	ENDIF
502
503	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
504	!
505	!-- No model continuation run; several initialising actions are possible
506	action = initializing_actions
507	DO WHILE ( TRIM( action ) /= '' )
508	position = INDEX( action, ' ' )
509	SELECT CASE ( action(1:position-1) )
510
511	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
512	'by_user', 'initialize_vortex', 'initialize_ptanom' )
513	action = action(position+1:)
514
515	CASE DEFAULT
516	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
517	'ng_action unkown or not allowed: action = "', &
518	TRIM(action), '"'
519	CALL local_stop
520
521	END SELECT
522	ENDDO
523	ENDIF
524	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
525	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
526	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
527	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
528	' allowed simultaneously'
529	CALL local_stop
530	ENDIF
531	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
532	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
533	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
534	'"set_constant_profiles" and "by_user" are not', &
535	' allowed simultaneously'
536	CALL local_stop
537	ENDIF
538	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
539	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
540	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
541	'"by_user" and "set_1d-model_profiles" are not', &
542	' allowed simultaneously'
543	CALL local_stop
544	ENDIF
545
546	IF ( cloud_physics .AND. .NOT. humidity ) THEN
547	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
548	cloud_physics, ' is not allowed with ', &
549	'humidity =', humidity
550	CALL local_stop
551	ENDIF
552
553	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
554	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
555	precipitation, ' is not allowed with ', &
556	'cloud_physics =', cloud_physics
557	CALL local_stop
558	ENDIF
559
560	IF ( humidity .AND. sloping_surface ) THEN
561	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE', &
562	'and hang = TRUE are not', &
563	' allowed simultaneously'
564	CALL local_stop
565	ENDIF
566
567	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
568	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
569	'is not implemented for humidity'
570	CALL local_stop
571	ENDIF
572
573	IF ( passive_scalar .AND. humidity ) THEN
574	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE and', &
575	'passive_scalar = TRUE is not allowed ', &
576	'simultaneously'
577	CALL local_stop
578	ENDIF
579
580	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
581	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
582	'is not implemented for passive_scalar'
583	CALL local_stop
584	ENDIF
585
586	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
587	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
588	TRIM( grid_matching ), &
589	'" found for parameter grid_matching'
590	CALL local_stop
591	ENDIF
592
593	!
594	!-- In case of no model continuation run, check initialising parameters and
595	!-- deduce further quantities
596	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
597
598	!
599	!-- Initial profiles for 1D and 3D model, respectively
600	u_init = ug_surface
601	v_init = vg_surface
602	pt_init = pt_surface
603	IF ( humidity ) q_init = q_surface
604	IF ( ocean ) sa_init = sa_surface
605	IF ( passive_scalar ) q_init = s_surface
606
607	!
608	!--
609	!-- If required, compute initial profile of the geostrophic wind
610	!-- (component ug)
611	i = 1
612	gradient = 0.0
613
614	IF ( .NOT. ocean ) THEN
615
616	ug_vertical_gradient_level_ind(1) = 0
617	ug(0) = ug_surface
618	DO k = 1, nzt+1
619	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
620	ug_vertical_gradient_level(i) >= 0.0 ) THEN
621	gradient = ug_vertical_gradient(i) / 100.0
622	ug_vertical_gradient_level_ind(i) = k - 1
623	i = i + 1
624	IF ( i > 10 ) THEN
625	IF ( myid == 0 ) THEN
626	PRINT*, '+++ check_parameters: upper bound 10 of array', &
627	' "ug_vertical_gradient_level_ind" exceeded'
628	ENDIF
629	CALL local_stop
630	ENDIF
631	ENDIF
632	IF ( gradient /= 0.0 ) THEN
633	IF ( k /= 1 ) THEN
634	ug(k) = ug(k-1) + dzu(k) * gradient
635	ELSE
636	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
637	ENDIF
638	ELSE
639	ug(k) = ug(k-1)
640	ENDIF
641	ENDDO
642
643	ELSE
644
645	ug_vertical_gradient_level_ind(1) = nzt+1
646	ug(nzt+1) = ug_surface
647	DO k = nzt, 0, -1
648	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
649	ug_vertical_gradient_level(i) <= 0.0 ) THEN
650	gradient = ug_vertical_gradient(i) / 100.0
651	ug_vertical_gradient_level_ind(i) = k + 1
652	i = i + 1
653	IF ( i > 10 ) THEN
654	IF ( myid == 0 ) THEN
655	PRINT*, '+++ check_parameters: upper bound 10 of array', &
656	' "ug_vertical_gradient_level_ind" exceeded'
657	ENDIF
658	CALL local_stop
659	ENDIF
660	ENDIF
661	IF ( gradient /= 0.0 ) THEN
662	IF ( k /= nzt ) THEN
663	ug(k) = ug(k+1) - dzu(k+1) * gradient
664	ELSE
665	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
666	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
667	ENDIF
668	ELSE
669	ug(k) = ug(k+1)
670	ENDIF
671	ENDDO
672
673	ENDIF
674
675	u_init = ug
676
677	!
678	!-- In case of no given gradients for ug, choose a vanishing gradient
679	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
680	ug_vertical_gradient_level(1) = 0.0
681	ENDIF
682
683	!
684	!--
685	!-- If required, compute initial profile of the geostrophic wind
686	!-- (component vg)
687	i = 1
688	gradient = 0.0
689
690	IF ( .NOT. ocean ) THEN
691
692	vg_vertical_gradient_level_ind(1) = 0
693	vg(0) = vg_surface
694	DO k = 1, nzt+1
695	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
696	vg_vertical_gradient_level(i) >= 0.0 ) THEN
697	gradient = vg_vertical_gradient(i) / 100.0
698	vg_vertical_gradient_level_ind(i) = k - 1
699	i = i + 1
700	IF ( i > 10 ) THEN
701	IF ( myid == 0 ) THEN
702	PRINT*, '+++ check_parameters: upper bound 10 of array', &
703	' "vg_vertical_gradient_level_ind" exceeded'
704	ENDIF
705	CALL local_stop
706	ENDIF
707	ENDIF
708	IF ( gradient /= 0.0 ) THEN
709	IF ( k /= 1 ) THEN
710	vg(k) = vg(k-1) + dzu(k) * gradient
711	ELSE
712	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
713	ENDIF
714	ELSE
715	vg(k) = vg(k-1)
716	ENDIF
717	ENDDO
718
719	ELSE
720
721	vg_vertical_gradient_level_ind(1) = nzt+1
722	vg(nzt+1) = vg_surface
723	DO k = nzt, 0, -1
724	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
725	vg_vertical_gradient_level(i) <= 0.0 ) THEN
726	gradient = vg_vertical_gradient(i) / 100.0
727	vg_vertical_gradient_level_ind(i) = k + 1
728	i = i + 1
729	IF ( i > 10 ) THEN
730	IF ( myid == 0 ) THEN
731	PRINT*, '+++ check_parameters: upper bound 10 of array', &
732	' "vg_vertical_gradient_level_ind" exceeded'
733	ENDIF
734	CALL local_stop
735	ENDIF
736	ENDIF
737	IF ( gradient /= 0.0 ) THEN
738	IF ( k /= nzt ) THEN
739	vg(k) = vg(k+1) - dzu(k+1) * gradient
740	ELSE
741	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
742	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
743	ENDIF
744	ELSE
745	vg(k) = vg(k+1)
746	ENDIF
747	ENDDO
748
749	ENDIF
750
751	v_init = vg
752
753	!
754	!-- In case of no given gradients for vg, choose a vanishing gradient
755	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
756	vg_vertical_gradient_level(1) = 0.0
757	ENDIF
758
759	!
760	!-- Compute initial temperature profile using the given temperature gradients
761	i = 1
762	gradient = 0.0
763
764	IF ( .NOT. ocean ) THEN
765
766	pt_vertical_gradient_level_ind(1) = 0
767	DO k = 1, nzt+1
768	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
769	pt_vertical_gradient_level(i) >= 0.0 ) THEN
770	gradient = pt_vertical_gradient(i) / 100.0
771	pt_vertical_gradient_level_ind(i) = k - 1
772	i = i + 1
773	IF ( i > 10 ) THEN
774	IF ( myid == 0 ) THEN
775	PRINT*, '+++ check_parameters: upper bound 10 of array', &
776	' "pt_vertical_gradient_level_ind" exceeded'
777	ENDIF
778	CALL local_stop
779	ENDIF
780	ENDIF
781	IF ( gradient /= 0.0 ) THEN
782	IF ( k /= 1 ) THEN
783	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
784	ELSE
785	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
786	ENDIF
787	ELSE
788	pt_init(k) = pt_init(k-1)
789	ENDIF
790	ENDDO
791
792	ELSE
793
794	pt_vertical_gradient_level_ind(1) = nzt+1
795	DO k = nzt, 0, -1
796	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
797	pt_vertical_gradient_level(i) <= 0.0 ) THEN
798	gradient = pt_vertical_gradient(i) / 100.0
799	pt_vertical_gradient_level_ind(i) = k + 1
800	i = i + 1
801	IF ( i > 10 ) THEN
802	IF ( myid == 0 ) THEN
803	PRINT*, '+++ check_parameters: upper bound 10 of array', &
804	' "pt_vertical_gradient_level_ind" exceeded'
805	ENDIF
806	CALL local_stop
807	ENDIF
808	ENDIF
809	IF ( gradient /= 0.0 ) THEN
810	IF ( k /= nzt ) THEN
811	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
812	ELSE
813	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
814	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
815	ENDIF
816	ELSE
817	pt_init(k) = pt_init(k+1)
818	ENDIF
819	ENDDO
820
821	ENDIF
822
823	!
824	!-- In case of no given temperature gradients, choose gradient of neutral
825	!-- stratification
826	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
827	pt_vertical_gradient_level(1) = 0.0
828	ENDIF
829
830	!
831	!-- Store temperature gradient at the top boundary for possible Neumann
832	!-- boundary condition
833	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
834
835	!
836	!-- If required, compute initial humidity or scalar profile using the given
837	!-- humidity/scalar gradient. In case of scalar transport, initially store
838	!-- values of the scalar parameters on humidity parameters
839	IF ( passive_scalar ) THEN
840	bc_q_b = bc_s_b
841	bc_q_t = bc_s_t
842	q_surface = s_surface
843	q_surface_initial_change = s_surface_initial_change
844	q_vertical_gradient = s_vertical_gradient
845	q_vertical_gradient_level = s_vertical_gradient_level
846	surface_waterflux = surface_scalarflux
847	ENDIF
848
849	IF ( humidity .OR. passive_scalar ) THEN
850
851	i = 1
852	gradient = 0.0
853	q_vertical_gradient_level_ind(1) = 0
854	DO k = 1, nzt+1
855	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
856	q_vertical_gradient_level(i) >= 0.0 ) THEN
857	gradient = q_vertical_gradient(i) / 100.0
858	q_vertical_gradient_level_ind(i) = k - 1
859	i = i + 1
860	IF ( i > 10 ) THEN
861	IF ( myid == 0 ) THEN
862	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
863	'ay "q_vertical_gradient_level_ind" exceeded'
864	ENDIF
865	CALL local_stop
866	ENDIF
867	ENDIF
868	IF ( gradient /= 0.0 ) THEN
869	IF ( k /= 1 ) THEN
870	q_init(k) = q_init(k-1) + dzu(k) * gradient
871	ELSE
872	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
873	ENDIF
874	ELSE
875	q_init(k) = q_init(k-1)
876	ENDIF
877	!
878	!-- Avoid negative humidities
879	IF ( q_init(k) < 0.0 ) THEN
880	q_init(k) = 0.0
881	ENDIF
882	ENDDO
883
884	!
885	!-- In case of no given humidity gradients, choose zero gradient
886	!-- conditions
887	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
888	q_vertical_gradient_level(1) = 0.0
889	ENDIF
890
891	!
892	!-- Store humidity gradient at the top boundary for possile Neumann
893	!-- boundary condition
894	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
895
896	ENDIF
897
898	!
899	!-- If required, compute initial salinity profile using the given salinity
900	!-- gradients
901	IF ( ocean ) THEN
902
903	i = 1
904	gradient = 0.0
905
906	sa_vertical_gradient_level_ind(1) = nzt+1
907	DO k = nzt, 0, -1
908	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
909	sa_vertical_gradient_level(i) <= 0.0 ) THEN
910	gradient = sa_vertical_gradient(i) / 100.0
911	sa_vertical_gradient_level_ind(i) = k + 1
912	i = i + 1
913	IF ( i > 10 ) THEN
914	IF ( myid == 0 ) THEN
915	PRINT*, '+++ check_parameters: upper bound 10 of array', &
916	' "sa_vertical_gradient_level_ind" exceeded'
917	ENDIF
918	CALL local_stop
919	ENDIF
920	ENDIF
921	IF ( gradient /= 0.0 ) THEN
922	IF ( k /= nzt ) THEN
923	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
924	ELSE
925	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
926	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
927	ENDIF
928	ELSE
929	sa_init(k) = sa_init(k+1)
930	ENDIF
931	ENDDO
932
933	ENDIF
934
935	ENDIF
936
937	!
938	!-- Compute Coriolis parameter
939	f = 2.0 * omega * SIN( phi / 180.0 * pi )
940	fs = 2.0 * omega * COS( phi / 180.0 * pi )
941
942	!
943	!-- Ocean runs always use reference values in the buoyancy term. Therefore
944	!-- set the reference temperature equal to the surface temperature.
945	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
946
947	!
948	!-- Reference value has to be used in buoyancy terms
949	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
950
951	!
952	!-- Sign of buoyancy/stability terms
953	IF ( ocean ) atmos_ocean_sign = -1.0
954
955	!
956	!-- Ocean version must use flux boundary conditions at the top
957	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
958	IF ( myid == 0 ) PRINT*, '+++ check_parameters: use_top_fluxes ',&
959	'must be .TRUE. in ocean version'
960	CALL local_stop
961	ENDIF
962
963	!
964	!-- In case of a given slope, compute the relevant quantities
965	IF ( alpha_surface /= 0.0 ) THEN
966	IF ( ABS( alpha_surface ) > 90.0 ) THEN
967	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
968	'=', alpha_surface, ' ) must be < 90.0'
969	CALL local_stop
970	ENDIF
971	sloping_surface = .TRUE.
972	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
973	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
974	ENDIF
975
976	!
977	!-- Check time step and cfl_factor
978	IF ( dt /= -1.0 ) THEN
979	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
980	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
981	CALL local_stop
982	ENDIF
983	dt_3d = dt
984	dt_fixed = .TRUE.
985	ENDIF
986
987	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
988	IF ( cfl_factor == -1.0 ) THEN
989	IF ( momentum_advec == 'ups-scheme' .OR. &
990	scalar_advec == 'ups-scheme' ) THEN
991	cfl_factor = 0.8
992	ELSE
993	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
994	cfl_factor = 0.8
995	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
996	cfl_factor = 0.9
997	ELSE
998	cfl_factor = 0.1
999	ENDIF
1000	ENDIF
1001	ELSE
1002	IF ( myid == 0 ) THEN
1003	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
1004	' out of range'
1005	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
1006	ENDIF
1007	CALL local_stop
1008	ENDIF
1009	ENDIF
1010
1011	!
1012	!-- Store simulated time at begin
1013	simulated_time_at_begin = simulated_time
1014
1015	!
1016	!-- Set wind speed in the Galilei-transformed system
1017	IF ( galilei_transformation ) THEN
1018	IF ( use_ug_for_galilei_tr .AND. &
1019	ug_vertical_gradient_level(1) == 0.0 .AND. &
1020	vg_vertical_gradient_level(1) == 0.0 ) THEN
1021	u_gtrans = ug_surface
1022	v_gtrans = vg_surface
1023	ELSEIF ( use_ug_for_galilei_tr .AND. &
1024	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1025	IF ( myid == 0 ) THEN
1026	PRINT*, '+++ check_parameters:'
1027	PRINT*, ' baroclinicity (ug) not allowed'
1028	PRINT*, ' simultaneously with galilei transformation'
1029	ENDIF
1030	CALL local_stop
1031	ELSEIF ( use_ug_for_galilei_tr .AND. &
1032	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1033	IF ( myid == 0 ) THEN
1034	PRINT*, '+++ check_parameters:'
1035	PRINT*, ' baroclinicity (vg) not allowed'
1036	PRINT*, ' simultaneously with galilei transformation'
1037	ENDIF
1038	CALL local_stop
1039	ELSE
1040	IF ( myid == 0 ) THEN
1041	PRINT*, '+++ WARNING: check_parameters:'
1042	PRINT*, ' variable translation speed used for galilei-tran' // &
1043	'sformation, which'
1044	PRINT*, ' may cause instabilities in stably stratified regions'
1045	ENDIF
1046	ENDIF
1047	ENDIF
1048
1049	!
1050	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1051	!-- fluxes have to be used in the diffusion-terms
1052	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1053
1054	!
1055	!-- Check boundary conditions and set internal variables:
1056	!-- Lateral boundary conditions
1057	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1058	bc_lr /= 'radiation/dirichlet' ) THEN
1059	IF ( myid == 0 ) THEN
1060	PRINT*, '+++ check_parameters:'
1061	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
1062	ENDIF
1063	CALL local_stop
1064	ENDIF
1065	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1066	bc_ns /= 'radiation/dirichlet' ) THEN
1067	IF ( myid == 0 ) THEN
1068	PRINT*, '+++ check_parameters:'
1069	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
1070	ENDIF
1071	CALL local_stop
1072	ENDIF
1073
1074	!
1075	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1076	!-- Willimas advection scheme. Several schemes and tools do not work with
1077	!-- non-cyclic boundary conditions.
1078	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1079	IF ( psolver /= 'multigrid' ) THEN
1080	IF ( myid == 0 ) THEN
1081	PRINT*, '+++ check_parameters:'
1082	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1083	' psolver = ', psolver
1084	ENDIF
1085	CALL local_stop
1086	ENDIF
1087	IF ( momentum_advec /= 'pw-scheme' ) THEN
1088	IF ( myid == 0 ) THEN
1089	PRINT*, '+++ check_parameters:'
1090	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1091	' momentum_advec = ', momentum_advec
1092	ENDIF
1093	CALL local_stop
1094	ENDIF
1095	IF ( scalar_advec /= 'pw-scheme' ) THEN
1096	IF ( myid == 0 ) THEN
1097	PRINT*, '+++ check_parameters:'
1098	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1099	' scalar_advec = ', scalar_advec
1100	ENDIF
1101	CALL local_stop
1102	ENDIF
1103	IF ( galilei_transformation ) THEN
1104	IF ( myid == 0 ) THEN
1105	PRINT*, '+++ check_parameters:'
1106	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1107	' galilei_transformation = .T.'
1108	ENDIF
1109	CALL local_stop
1110	ENDIF
1111	! IF ( conserve_volume_flow ) THEN
1112	! IF ( myid == 0 ) THEN
1113	! PRINT*, '+++ check_parameters:'
1114	! PRINT*, ' non-cyclic lateral boundaries do not allow', &
1115	! ' conserve_volume_flow = .T.'
1116	! ENDIF
1117	! CALL local_stop
1118	! ENDIF
1119	ENDIF
1120
1121	!
1122	!-- Bottom boundary condition for the turbulent Kinetic energy
1123	IF ( bc_e_b == 'neumann' ) THEN
1124	ibc_e_b = 1
1125	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1126	IF ( myid == 0 ) THEN
1127	PRINT*, '+++ WARNING: check_parameters:'
1128	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
1129	ENDIF
1130	ENDIF
1131	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1132	ibc_e_b = 2
1133	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1134	IF ( myid == 0 ) THEN
1135	PRINT*, '+++ WARNING: check_parameters:'
1136	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
1137	ENDIF
1138	ENDIF
1139	IF ( .NOT. prandtl_layer ) THEN
1140	bc_e_b = 'neumann'
1141	ibc_e_b = 1
1142	IF ( myid == 0 ) THEN
1143	PRINT*, '+++ WARNING: check_parameters:'
1144	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
1145	ENDIF
1146	ENDIF
1147	ELSE
1148	IF ( myid == 0 ) THEN
1149	PRINT*, '+++ check_parameters:'
1150	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
1151	ENDIF
1152	CALL local_stop
1153	ENDIF
1154
1155	!
1156	!-- Boundary conditions for perturbation pressure
1157	IF ( bc_p_b == 'dirichlet' ) THEN
1158	ibc_p_b = 0
1159	ELSEIF ( bc_p_b == 'neumann' ) THEN
1160	ibc_p_b = 1
1161	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1162	ibc_p_b = 2
1163	ELSE
1164	IF ( myid == 0 ) THEN
1165	PRINT*, '+++ check_parameters:'
1166	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
1167	ENDIF
1168	CALL local_stop
1169	ENDIF
1170	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1171	IF ( myid == 0 ) THEN
1172	PRINT*, '+++ check_parameters:'
1173	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
1174	' not allowed with'
1175	PRINT*, ' prandtl_layer = .FALSE.'
1176	ENDIF
1177	CALL local_stop
1178	ENDIF
1179	IF ( bc_p_t == 'dirichlet' ) THEN
1180	ibc_p_t = 0
1181	ELSEIF ( bc_p_t == 'neumann' ) THEN
1182	ibc_p_t = 1
1183	ELSE
1184	IF ( myid == 0 ) THEN
1185	PRINT*, '+++ check_parameters:'
1186	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
1187	ENDIF
1188	CALL local_stop
1189	ENDIF
1190
1191	!
1192	!-- Boundary conditions for potential temperature
1193	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1194	ibc_pt_b = 2
1195	ELSE
1196	IF ( bc_pt_b == 'dirichlet' ) THEN
1197	ibc_pt_b = 0
1198	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1199	ibc_pt_b = 1
1200	ELSE
1201	IF ( myid == 0 ) THEN
1202	PRINT*, '+++ check_parameters:'
1203	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
1204	ENDIF
1205	CALL local_stop
1206	ENDIF
1207	ENDIF
1208
1209	IF ( bc_pt_t == 'dirichlet' ) THEN
1210	ibc_pt_t = 0
1211	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1212	ibc_pt_t = 1
1213	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1214	ibc_pt_t = 2
1215	ELSE
1216	IF ( myid == 0 ) THEN
1217	PRINT*, '+++ check_parameters:'
1218	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
1219	ENDIF
1220	CALL local_stop
1221	ENDIF
1222
1223	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1224	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1225	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1226	top_momentumflux_v /= 9999999.9 ) THEN
1227	constant_top_momentumflux = .TRUE.
1228	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1229	top_momentumflux_v == 9999999.9 ) ) THEN
1230	IF ( myid == 0 ) THEN
1231	PRINT*, '+++ check_parameters:'
1232	PRINT*, ' both, top_momentumflux_u AND top_momentumflux_v'
1233	PRINT*, ' must be set'
1234	ENDIF
1235	CALL local_stop
1236	ENDIF
1237
1238	!
1239	!-- A given surface temperature implies Dirichlet boundary condition for
1240	!-- temperature. In this case specification of a constant heat flux is
1241	!-- forbidden.
1242	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1243	surface_heatflux /= 0.0 ) THEN
1244	IF ( myid == 0 ) THEN
1245	PRINT*, '+++ check_parameters:'
1246	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
1247	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
1248	ENDIF
1249	CALL local_stop
1250	ENDIF
1251	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1252	IF ( myid == 0 ) THEN
1253	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
1254	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
1255	pt_surface_initial_change
1256	ENDIF
1257	CALL local_stop
1258	ENDIF
1259
1260	!
1261	!-- A given temperature at the top implies Dirichlet boundary condition for
1262	!-- temperature. In this case specification of a constant heat flux is
1263	!-- forbidden.
1264	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1265	top_heatflux /= 0.0 ) THEN
1266	IF ( myid == 0 ) THEN
1267	PRINT*, '+++ check_parameters:'
1268	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
1269	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
1270	ENDIF
1271	CALL local_stop
1272	ENDIF
1273
1274	!
1275	!-- Boundary conditions for salinity
1276	IF ( ocean ) THEN
1277	IF ( bc_sa_t == 'dirichlet' ) THEN
1278	ibc_sa_t = 0
1279	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1280	ibc_sa_t = 1
1281	ELSE
1282	IF ( myid == 0 ) THEN
1283	PRINT*, '+++ check_parameters:'
1284	PRINT*, ' unknown boundary condition: bc_sa_t = ', bc_sa_t
1285	ENDIF
1286	CALL local_stop
1287	ENDIF
1288
1289	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1290	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1291	IF ( myid == 0 ) THEN
1292	PRINT*, '+++ check_parameters:'
1293	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1294	PRINT*, ' requires to set top_salinityflux '
1295	ENDIF
1296	CALL local_stop
1297	ENDIF
1298
1299	!
1300	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1301	!-- salinity. In this case specification of a constant salinity flux is
1302	!-- forbidden.
1303	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1304	top_salinityflux /= 0.0 ) THEN
1305	IF ( myid == 0 ) THEN
1306	PRINT*, '+++ check_parameters:'
1307	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1308	PRINT*, ' is not allowed with constant_top_salinityflux = ', &
1309	'.TRUE.'
1310	ENDIF
1311	CALL local_stop
1312	ENDIF
1313
1314	ENDIF
1315
1316	!
1317	!-- In case of humidity or passive scalar, set boundary conditions for total
1318	!-- water content / scalar
1319	IF ( humidity .OR. passive_scalar ) THEN
1320	IF ( humidity ) THEN
1321	sq = 'q'
1322	ELSE
1323	sq = 's'
1324	ENDIF
1325	IF ( bc_q_b == 'dirichlet' ) THEN
1326	ibc_q_b = 0
1327	ELSEIF ( bc_q_b == 'neumann' ) THEN
1328	ibc_q_b = 1
1329	ELSE
1330	IF ( myid == 0 ) THEN
1331	PRINT*, '+++ check_parameters:'
1332	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
1333	ENDIF
1334	CALL local_stop
1335	ENDIF
1336	IF ( bc_q_t == 'dirichlet' ) THEN
1337	ibc_q_t = 0
1338	ELSEIF ( bc_q_t == 'neumann' ) THEN
1339	ibc_q_t = 1
1340	ELSE
1341	IF ( myid == 0 ) THEN
1342	PRINT*, '+++ check_parameters:'
1343	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
1344	ENDIF
1345	CALL local_stop
1346	ENDIF
1347
1348	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1349
1350	!
1351	!-- A given surface humidity implies Dirichlet boundary condition for
1352	!-- humidity. In this case specification of a constant water flux is
1353	!-- forbidden.
1354	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1355	IF ( myid == 0 ) THEN
1356	PRINT*, '+++ check_parameters:'
1357	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
1358	PRINT*, ' is not allowed with prescribed surface flux'
1359	ENDIF
1360	CALL local_stop
1361	ENDIF
1362	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1363	IF ( myid == 0 ) THEN
1364	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
1365	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
1366	' = ', q_surface_initial_change
1367	ENDIF
1368	CALL local_stop
1369	ENDIF
1370
1371	ENDIF
1372
1373	!
1374	!-- Boundary conditions for horizontal components of wind speed
1375	IF ( bc_uv_b == 'dirichlet' ) THEN
1376	ibc_uv_b = 0
1377	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1378	ibc_uv_b = 1
1379	IF ( prandtl_layer ) THEN
1380	IF ( myid == 0 ) THEN
1381	PRINT*, '+++ check_parameters:'
1382	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
1383	' is not allowed with'
1384	PRINT*, ' prandtl_layer = .TRUE.'
1385	ENDIF
1386	CALL local_stop
1387	ENDIF
1388	ELSE
1389	IF ( myid == 0 ) THEN
1390	PRINT*, '+++ check_parameters:'
1391	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
1392	ENDIF
1393	CALL local_stop
1394	ENDIF
1395	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1396	bc_uv_t = 'neumann'
1397	ibc_uv_t = 1
1398	ELSE
1399	IF ( bc_uv_t == 'dirichlet' ) THEN
1400	ibc_uv_t = 0
1401	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1402	ibc_uv_t = 1
1403	ELSE
1404	IF ( myid == 0 ) THEN
1405	PRINT*, '+++ check_parameters:'
1406	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
1407	ENDIF
1408	CALL local_stop
1409	ENDIF
1410	ENDIF
1411
1412	!
1413	!-- Compute and check, respectively, the Rayleigh Damping parameter
1414	IF ( rayleigh_damping_factor == -1.0 ) THEN
1415	IF ( momentum_advec == 'ups-scheme' ) THEN
1416	rayleigh_damping_factor = 0.01
1417	ELSE
1418	rayleigh_damping_factor = 0.0
1419	ENDIF
1420	ELSE
1421	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1422	THEN
1423	IF ( myid == 0 ) THEN
1424	PRINT*, '+++ check_parameters:'
1425	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
1426	' out of range [0.0,1.0]'
1427	ENDIF
1428	CALL local_stop
1429	ENDIF
1430	ENDIF
1431
1432	IF ( rayleigh_damping_height == -1.0 ) THEN
1433	IF ( .NOT. ocean ) THEN
1434	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1435	ELSE
1436	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1437	ENDIF
1438	ELSE
1439	IF ( .NOT. ocean ) THEN
1440	IF ( rayleigh_damping_height < 0.0 .OR. &
1441	rayleigh_damping_height > zu(nzt) ) THEN
1442	IF ( myid == 0 ) THEN
1443	PRINT*, '+++ check_parameters:'
1444	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1445	' out of range [0.0,', zu(nzt), ']'
1446	ENDIF
1447	CALL local_stop
1448	ENDIF
1449	ELSE
1450	IF ( rayleigh_damping_height > 0.0 .OR. &
1451	rayleigh_damping_height < zu(nzb) ) THEN
1452	IF ( myid == 0 ) THEN
1453	PRINT*, '+++ check_parameters:'
1454	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1455	' out of range [0.0,', zu(nzb), ']'
1456	ENDIF
1457	CALL local_stop
1458	ENDIF
1459	ENDIF
1460	ENDIF
1461
1462	!
1463	!-- Check limiters for Upstream-Spline scheme
1464	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1465	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1466	overshoot_limit_e < 0.0 ) THEN
1467	IF ( myid == 0 ) THEN
1468	PRINT*, '+++ check_parameters:'
1469	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
1470	ENDIF
1471	CALL local_stop
1472	ENDIF
1473	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1474	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1475	IF ( myid == 0 ) THEN
1476	PRINT*, '+++ check_parameters:'
1477	PRINT*, ' ups_limit_... < 0.0 is not allowed'
1478	ENDIF
1479	CALL local_stop
1480	ENDIF
1481
1482	!
1483	!-- Check number of chosen statistic regions. More than 10 regions are not
1484	!-- allowed, because so far no more than 10 corresponding output files can
1485	!-- be opened (cf. check_open)
1486	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1487	IF ( myid == 0 ) THEN
1488	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
1489	statistic_regions+1
1490	PRINT*, ' Only 10 regions are allowed'
1491	ENDIF
1492	CALL local_stop
1493	ENDIF
1494	IF ( normalizing_region > statistic_regions .OR. &
1495	normalizing_region < 0) THEN
1496	IF ( myid == 0 ) THEN
1497	PRINT*, '+++ check_parameters: normalizing_region = ', &
1498	normalizing_region, ' is unknown'
1499	PRINT*, ' Must be <= ', statistic_regions
1500	ENDIF
1501	CALL local_stop
1502	ENDIF
1503
1504	!
1505	!-- Check the interval for sorting particles.
1506	!-- Using particles as cloud droplets requires sorting after each timestep.
1507	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1508	dt_sort_particles = 0.0
1509	IF ( myid == 0 ) THEN
1510	PRINT*, '+++ WARNING: check_parameters:'
1511	PRINT*, ' dt_sort_particles is reset to 0.0 because ', &
1512	'of cloud_droplets = .TRUE.'
1513	ENDIF
1514	ENDIF
1515
1516	!
1517	!-- Set the default intervals for data output, if necessary
1518	!-- NOTE: dt_dosp has already been set in package_parin
1519	IF ( dt_data_output /= 9999999.9 ) THEN
1520	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1521	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1522	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1523	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1524	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1525	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1526	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1527	ENDIF
1528
1529	!
1530	!-- Set the default skip time intervals for data output, if necessary
1531	IF ( skip_time_dopr == 9999999.9 ) &
1532	skip_time_dopr = skip_time_data_output
1533	IF ( skip_time_dosp == 9999999.9 ) &
1534	skip_time_dosp = skip_time_data_output
1535	IF ( skip_time_do2d_xy == 9999999.9 ) &
1536	skip_time_do2d_xy = skip_time_data_output
1537	IF ( skip_time_do2d_xz == 9999999.9 ) &
1538	skip_time_do2d_xz = skip_time_data_output
1539	IF ( skip_time_do2d_yz == 9999999.9 ) &
1540	skip_time_do2d_yz = skip_time_data_output
1541	IF ( skip_time_do3d == 9999999.9 ) &
1542	skip_time_do3d = skip_time_data_output
1543	IF ( skip_time_data_output_av == 9999999.9 ) &
1544	skip_time_data_output_av = skip_time_data_output
1545
1546	!
1547	!-- Check the average intervals (first for 3d-data, then for profiles and
1548	!-- spectra)
1549	IF ( averaging_interval > dt_data_output_av ) THEN
1550	IF ( myid == 0 ) THEN
1551	PRINT*, '+++ check_parameters: average_interval=', &
1552	averaging_interval, ' must be <= dt_data_output=', &
1553	dt_data_output
1554	ENDIF
1555	CALL local_stop
1556	ENDIF
1557
1558	IF ( averaging_interval_pr == 9999999.9 ) THEN
1559	averaging_interval_pr = averaging_interval
1560	ENDIF
1561
1562	IF ( averaging_interval_pr > dt_dopr ) THEN
1563	IF ( myid == 0 ) THEN
1564	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1565	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1566	ENDIF
1567	CALL local_stop
1568	ENDIF
1569
1570	IF ( averaging_interval_sp == 9999999.9 ) THEN
1571	averaging_interval_sp = averaging_interval
1572	ENDIF
1573
1574	IF ( averaging_interval_sp > dt_dosp ) THEN
1575	IF ( myid == 0 ) THEN
1576	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1577	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1578	ENDIF
1579	CALL local_stop
1580	ENDIF
1581
1582	!
1583	!-- Set the default interval for profiles entering the temporal average
1584	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1585	dt_averaging_input_pr = dt_averaging_input
1586	ENDIF
1587
1588	!
1589	!-- Set the default interval for the output of timeseries to a reasonable
1590	!-- value (tries to minimize the number of calls of flow_statistics)
1591	IF ( dt_dots == 9999999.9 ) THEN
1592	IF ( averaging_interval_pr == 0.0 ) THEN
1593	dt_dots = MIN( dt_run_control, dt_dopr )
1594	ELSE
1595	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1596	ENDIF
1597	ENDIF
1598
1599	!
1600	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1601	IF ( dt_averaging_input > averaging_interval ) THEN
1602	IF ( myid == 0 ) THEN
1603	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1604	dt_averaging_input, ' must be <= averaging_interval=', &
1605	averaging_interval
1606	ENDIF
1607	CALL local_stop
1608	ENDIF
1609
1610	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1611	IF ( myid == 0 ) THEN
1612	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1613	dt_averaging_input_pr, &
1614	' must be <= averaging_interval_pr=', &
1615	averaging_interval_pr
1616	ENDIF
1617	CALL local_stop
1618	ENDIF
1619
1620	!
1621	!-- Set the default value for the integration interval of precipitation amount
1622	IF ( precipitation ) THEN
1623	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1624	precipitation_amount_interval = dt_do2d_xy
1625	ELSE
1626	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1627	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
1628	'precipitation_amount_interval =', &
1629	precipitation_amount_interval, &
1630	' must not be larger than dt_do2d_xy', &
1631	' = ', dt_do2d_xy
1632	CALL local_stop
1633	ENDIF
1634	ENDIF
1635	ENDIF
1636
1637	!
1638	!-- Determine the number of output profiles and check whether they are
1639	!-- permissible
1640	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1641
1642	dopr_n = dopr_n + 1
1643	i = dopr_n
1644
1645	!
1646	!-- Determine internal profile number (for hom, homs)
1647	!-- and store height levels
1648	SELECT CASE ( TRIM( data_output_pr(i) ) )
1649
1650	CASE ( 'u', '#u' )
1651	dopr_index(i) = 1
1652	dopr_unit(i) = 'm/s'
1653	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1654	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1655	dopr_initial_index(i) = 5
1656	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1657	data_output_pr(i) = data_output_pr(i)(2:)
1658	ENDIF
1659
1660	CASE ( 'v', '#v' )
1661	dopr_index(i) = 2
1662	dopr_unit(i) = 'm/s'
1663	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1664	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1665	dopr_initial_index(i) = 6
1666	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1667	data_output_pr(i) = data_output_pr(i)(2:)
1668	ENDIF
1669
1670	CASE ( 'w' )
1671	dopr_index(i) = 3
1672	dopr_unit(i) = 'm/s'
1673	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1674
1675	CASE ( 'pt', '#pt' )
1676	IF ( .NOT. cloud_physics ) THEN
1677	dopr_index(i) = 4
1678	dopr_unit(i) = 'K'
1679	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1680	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1681	dopr_initial_index(i) = 7
1682	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1683	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1684	data_output_pr(i) = data_output_pr(i)(2:)
1685	ENDIF
1686	ELSE
1687	dopr_index(i) = 43
1688	dopr_unit(i) = 'K'
1689	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1690	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1691	dopr_initial_index(i) = 28
1692	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1693	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1694	data_output_pr(i) = data_output_pr(i)(2:)
1695	ENDIF
1696	ENDIF
1697
1698	CASE ( 'e' )
1699	dopr_index(i) = 8
1700	dopr_unit(i) = 'm2/s2'
1701	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1702	hom(nzb,2,8,:) = 0.0
1703
1704	CASE ( 'km', '#km' )
1705	dopr_index(i) = 9
1706	dopr_unit(i) = 'm2/s'
1707	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1708	hom(nzb,2,9,:) = 0.0
1709	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1710	dopr_initial_index(i) = 23
1711	hom(:,2,23,:) = hom(:,2,9,:)
1712	data_output_pr(i) = data_output_pr(i)(2:)
1713	ENDIF
1714
1715	CASE ( 'kh', '#kh' )
1716	dopr_index(i) = 10
1717	dopr_unit(i) = 'm2/s'
1718	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1719	hom(nzb,2,10,:) = 0.0
1720	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1721	dopr_initial_index(i) = 24
1722	hom(:,2,24,:) = hom(:,2,10,:)
1723	data_output_pr(i) = data_output_pr(i)(2:)
1724	ENDIF
1725
1726	CASE ( 'l', '#l' )
1727	dopr_index(i) = 11
1728	dopr_unit(i) = 'm'
1729	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1730	hom(nzb,2,11,:) = 0.0
1731	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1732	dopr_initial_index(i) = 25
1733	hom(:,2,25,:) = hom(:,2,11,:)
1734	data_output_pr(i) = data_output_pr(i)(2:)
1735	ENDIF
1736
1737	CASE ( 'w"u"' )
1738	dopr_index(i) = 12
1739	dopr_unit(i) = 'm2/s2'
1740	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1741	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1742
1743	CASE ( 'wu' )
1744	dopr_index(i) = 13
1745	dopr_unit(i) = 'm2/s2'
1746	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1747
1748	CASE ( 'w"v"' )
1749	dopr_index(i) = 14
1750	dopr_unit(i) = 'm2/s2'
1751	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1752	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1753
1754	CASE ( 'wv' )
1755	dopr_index(i) = 15
1756	dopr_unit(i) = 'm2/s2'
1757	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1758
1759	CASE ( 'w"pt"' )
1760	dopr_index(i) = 16
1761	dopr_unit(i) = 'K m/s'
1762	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1763
1764	CASE ( 'wpt' )
1765	dopr_index(i) = 17
1766	dopr_unit(i) = 'K m/s'
1767	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1768
1769	CASE ( 'wpt' )
1770	dopr_index(i) = 18
1771	dopr_unit(i) = 'K m/s'
1772	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1773
1774	CASE ( 'wu' )
1775	dopr_index(i) = 19
1776	dopr_unit(i) = 'm2/s2'
1777	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1778	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1779
1780	CASE ( 'wv' )
1781	dopr_index(i) = 20
1782	dopr_unit(i) = 'm2/s2'
1783	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1784	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1785
1786	CASE ( 'wptBC' )
1787	dopr_index(i) = 21
1788	dopr_unit(i) = 'K m/s'
1789	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1790
1791	CASE ( 'wptBC' )
1792	dopr_index(i) = 22
1793	dopr_unit(i) = 'K m/s'
1794	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1795
1796	CASE ( 'sa', '#sa' )
1797	IF ( .NOT. ocean ) THEN
1798	IF ( myid == 0 ) THEN
1799	PRINT*, '+++ check_parameters: data_output_pr = ', &
1800	data_output_pr(i), &
1801	' is not implemented for ocean = FALSE'
1802	ENDIF
1803	CALL local_stop
1804	ELSE
1805	dopr_index(i) = 23
1806	dopr_unit(i) = 'psu'
1807	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1808	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1809	dopr_initial_index(i) = 26
1810	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1811	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1812	data_output_pr(i) = data_output_pr(i)(2:)
1813	ENDIF
1814	ENDIF
1815
1816	CASE ( 'u*2' )
1817	dopr_index(i) = 30
1818	dopr_unit(i) = 'm2/s2'
1819	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1820
1821	CASE ( 'v*2' )
1822	dopr_index(i) = 31
1823	dopr_unit(i) = 'm2/s2'
1824	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1825
1826	CASE ( 'w*2' )
1827	dopr_index(i) = 32
1828	dopr_unit(i) = 'm2/s2'
1829	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1830
1831	CASE ( 'pt*2' )
1832	dopr_index(i) = 33
1833	dopr_unit(i) = 'K2'
1834	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1835
1836	CASE ( 'e*' )
1837	dopr_index(i) = 34
1838	dopr_unit(i) = 'm2/s2'
1839	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1840
1841	CASE ( 'w2pt' )
1842	dopr_index(i) = 35
1843	dopr_unit(i) = 'K m2/s2'
1844	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1845
1846	CASE ( 'wpt2' )
1847	dopr_index(i) = 36
1848	dopr_unit(i) = 'K2 m/s'
1849	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1850
1851	CASE ( 'we' )
1852	dopr_index(i) = 37
1853	dopr_unit(i) = 'm3/s3'
1854	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1855
1856	CASE ( 'w*3' )
1857	dopr_index(i) = 38
1858	dopr_unit(i) = 'm3/s3'
1859	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1860
1861	CASE ( 'Sw' )
1862	dopr_index(i) = 39
1863	dopr_unit(i) = 'none'
1864	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1865
1866	CASE ( 'q', '#q' )
1867	IF ( .NOT. humidity ) THEN
1868	IF ( myid == 0 ) THEN
1869	PRINT*, '+++ check_parameters: data_output_pr = ', &
1870	data_output_pr(i), &
1871	' is not implemented for humidity = FALSE'
1872	ENDIF
1873	CALL local_stop
1874	ELSE
1875	dopr_index(i) = 41
1876	dopr_unit(i) = 'kg/kg'
1877	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1878	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1879	dopr_initial_index(i) = 26
1880	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1881	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1882	data_output_pr(i) = data_output_pr(i)(2:)
1883	ENDIF
1884	ENDIF
1885
1886	CASE ( 's', '#s' )
1887	IF ( .NOT. passive_scalar ) THEN
1888	IF ( myid == 0 ) THEN
1889	PRINT*, '+++ check_parameters: data_output_pr = ', &
1890	data_output_pr(i), &
1891	' is not implemented for passive_scalar = FALSE'
1892	ENDIF
1893	CALL local_stop
1894	ELSE
1895	dopr_index(i) = 41
1896	dopr_unit(i) = 'kg/m3'
1897	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1898	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1899	dopr_initial_index(i) = 26
1900	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1901	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1902	data_output_pr(i) = data_output_pr(i)(2:)
1903	ENDIF
1904	ENDIF
1905
1906	CASE ( 'qv', '#qv' )
1907	IF ( .NOT. cloud_physics ) THEN
1908	dopr_index(i) = 41
1909	dopr_unit(i) = 'kg/kg'
1910	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1911	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1912	dopr_initial_index(i) = 26
1913	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1914	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1915	data_output_pr(i) = data_output_pr(i)(2:)
1916	ENDIF
1917	ELSE
1918	dopr_index(i) = 42
1919	dopr_unit(i) = 'kg/kg'
1920	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1921	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1922	dopr_initial_index(i) = 27
1923	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1924	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1925	data_output_pr(i) = data_output_pr(i)(2:)
1926	ENDIF
1927	ENDIF
1928
1929	CASE ( 'lpt', '#lpt' )
1930	IF ( .NOT. cloud_physics ) THEN
1931	IF ( myid == 0 ) THEN
1932	PRINT*, '+++ check_parameters: data_output_pr = ', &
1933	data_output_pr(i), &
1934	' is not implemented for cloud_physics = FALSE'
1935	ENDIF
1936	CALL local_stop
1937	ELSE
1938	dopr_index(i) = 4
1939	dopr_unit(i) = 'K'
1940	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1941	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1942	dopr_initial_index(i) = 7
1943	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1944	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1945	data_output_pr(i) = data_output_pr(i)(2:)
1946	ENDIF
1947	ENDIF
1948
1949	CASE ( 'vpt', '#vpt' )
1950	dopr_index(i) = 44
1951	dopr_unit(i) = 'K'
1952	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1953	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1954	dopr_initial_index(i) = 29
1955	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1956	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1957	data_output_pr(i) = data_output_pr(i)(2:)
1958	ENDIF
1959
1960	CASE ( 'w"vpt"' )
1961	dopr_index(i) = 45
1962	dopr_unit(i) = 'K m/s'
1963	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1964
1965	CASE ( 'wvpt' )
1966	dopr_index(i) = 46
1967	dopr_unit(i) = 'K m/s'
1968	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1969
1970	CASE ( 'wvpt' )
1971	dopr_index(i) = 47
1972	dopr_unit(i) = 'K m/s'
1973	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1974
1975	CASE ( 'w"q"' )
1976	IF ( .NOT. humidity ) THEN
1977	IF ( myid == 0 ) THEN
1978	PRINT*, '+++ check_parameters: data_output_pr = ', &
1979	data_output_pr(i), &
1980	' is not implemented for humidity = FALSE'
1981	ENDIF
1982	CALL local_stop
1983	ELSE
1984	dopr_index(i) = 48
1985	dopr_unit(i) = 'kg/kg m/s'
1986	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1987	ENDIF
1988
1989	CASE ( 'wq' )
1990	IF ( .NOT. humidity ) THEN
1991	IF ( myid == 0 ) THEN
1992	PRINT*, '+++ check_parameters: data_output_pr = ', &
1993	data_output_pr(i), &
1994	' is not implemented for humidity = FALSE'
1995	ENDIF
1996	CALL local_stop
1997	ELSE
1998	dopr_index(i) = 49
1999	dopr_unit(i) = 'kg/kg m/s'
2000	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2001	ENDIF
2002
2003	CASE ( 'wq' )
2004	IF ( .NOT. humidity ) THEN
2005	IF ( myid == 0 ) THEN
2006	PRINT*, '+++ check_parameters: data_output_pr = ', &
2007	data_output_pr(i), &
2008	' is not implemented for humidity = FALSE'
2009	ENDIF
2010	CALL local_stop
2011	ELSE
2012	dopr_index(i) = 50
2013	dopr_unit(i) = 'kg/kg m/s'
2014	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2015	ENDIF
2016
2017	CASE ( 'w"s"' )
2018	IF ( .NOT. passive_scalar ) THEN
2019	IF ( myid == 0 ) THEN
2020	PRINT*, '+++ check_parameters: data_output_pr = ', &
2021	data_output_pr(i), &
2022	' is not implemented for passive_scalar = FALSE'
2023	ENDIF
2024	CALL local_stop
2025	ELSE
2026	dopr_index(i) = 48
2027	dopr_unit(i) = 'kg/m3 m/s'
2028	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2029	ENDIF
2030
2031	CASE ( 'ws' )
2032	IF ( .NOT. passive_scalar ) THEN
2033	IF ( myid == 0 ) THEN
2034	PRINT*, '+++ check_parameters: data_output_pr = ', &
2035	data_output_pr(i), &
2036	' is not implemented for passive_scalar = FALSE'
2037	ENDIF
2038	CALL local_stop
2039	ELSE
2040	dopr_index(i) = 49
2041	dopr_unit(i) = 'kg/m3 m/s'
2042	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2043	ENDIF
2044
2045	CASE ( 'ws' )
2046	IF ( .NOT. passive_scalar ) THEN
2047	IF ( myid == 0 ) THEN
2048	PRINT*, '+++ check_parameters: data_output_pr = ', &
2049	data_output_pr(i), &
2050	' is not implemented for passive_scalar = FALSE'
2051	ENDIF
2052	CALL local_stop
2053	ELSE
2054	dopr_index(i) = 50
2055	dopr_unit(i) = 'kg/m3 m/s'
2056	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2057	ENDIF
2058
2059	CASE ( 'w"qv"' )
2060	IF ( humidity .AND. .NOT. cloud_physics ) &
2061	THEN
2062	dopr_index(i) = 48
2063	dopr_unit(i) = 'kg/kg m/s'
2064	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2065	ELSEIF( humidity .AND. cloud_physics ) THEN
2066	dopr_index(i) = 51
2067	dopr_unit(i) = 'kg/kg m/s'
2068	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2069	ELSE
2070	IF ( myid == 0 ) THEN
2071	PRINT*, '+++ check_parameters: data_output_pr = ', &
2072	data_output_pr(i), &
2073	' is not implemented for cloud_physics = FALSE', &
2074	' and humidity = FALSE'
2075	ENDIF
2076	CALL local_stop
2077	ENDIF
2078
2079	CASE ( 'wqv' )
2080	IF ( humidity .AND. .NOT. cloud_physics ) &
2081	THEN
2082	dopr_index(i) = 49
2083	dopr_unit(i) = 'kg/kg m/s'
2084	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2085	ELSEIF( humidity .AND. cloud_physics ) THEN
2086	dopr_index(i) = 52
2087	dopr_unit(i) = 'kg/kg m/s'
2088	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2089	ELSE
2090	IF ( myid == 0 ) THEN
2091	PRINT*, '+++ check_parameters: data_output_pr = ', &
2092	data_output_pr(i), &
2093	' is not implemented for cloud_physics = FALSE', &
2094	' and humidity = FALSE'
2095	ENDIF
2096	CALL local_stop
2097	ENDIF
2098
2099	CASE ( 'wqv' )
2100	IF ( humidity .AND. .NOT. cloud_physics ) &
2101	THEN
2102	dopr_index(i) = 50
2103	dopr_unit(i) = 'kg/kg m/s'
2104	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2105	ELSEIF( humidity .AND. cloud_physics ) THEN
2106	dopr_index(i) = 53
2107	dopr_unit(i) = 'kg/kg m/s'
2108	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2109	ELSE
2110	IF ( myid == 0 ) THEN
2111	PRINT*, '+++ check_parameters: data_output_pr = ', &
2112	data_output_pr(i), &
2113	' is not implemented for cloud_physics = FALSE', &
2114	' and humidity = FALSE'
2115	ENDIF
2116	CALL local_stop
2117	ENDIF
2118
2119	CASE ( 'ql' )
2120	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2121	IF ( myid == 0 ) THEN
2122	PRINT*, '+++ check_parameters: data_output_pr = ', &
2123	data_output_pr(i), &
2124	' is not implemented for cloud_physics = FALSE'
2125	ENDIF
2126	CALL local_stop
2127	ELSE
2128	dopr_index(i) = 54
2129	dopr_unit(i) = 'kg/kg'
2130	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2131	ENDIF
2132
2133	CASE ( 'wuu*/dz' )
2134	dopr_index(i) = 55
2135	dopr_unit(i) = 'm2/s3'
2136	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2137
2138	CASE ( 'wp/dz' )
2139	dopr_index(i) = 56
2140	dopr_unit(i) = 'm2/s3'
2141	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2142
2143	CASE ( 'w"e/dz' )
2144	dopr_index(i) = 57
2145	dopr_unit(i) = 'm2/s3'
2146	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2147
2148	CASE ( 'u"pt"' )
2149	dopr_index(i) = 58
2150	dopr_unit(i) = 'K m/s'
2151	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2152
2153	CASE ( 'upt' )
2154	dopr_index(i) = 59
2155	dopr_unit(i) = 'K m/s'
2156	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2157
2158	CASE ( 'upt_t' )
2159	dopr_index(i) = 60
2160	dopr_unit(i) = 'K m/s'
2161	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2162
2163	CASE ( 'v"pt"' )
2164	dopr_index(i) = 61
2165	dopr_unit(i) = 'K m/s'
2166	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2167
2168	CASE ( 'vpt' )
2169	dopr_index(i) = 62
2170	dopr_unit(i) = 'K m/s'
2171	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2172
2173	CASE ( 'vpt_t' )
2174	dopr_index(i) = 63
2175	dopr_unit(i) = 'K m/s'
2176	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2177
2178	CASE ( 'rho' )
2179	dopr_index(i) = 64
2180	dopr_unit(i) = 'kg/m3'
2181	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2182
2183	CASE ( 'w"sa"' )
2184	IF ( .NOT. ocean ) THEN
2185	IF ( myid == 0 ) THEN
2186	PRINT*, '+++ check_parameters: data_output_pr = ', &
2187	data_output_pr(i), &
2188	' is not implemented for ocean = FALSE'
2189	ENDIF
2190	CALL local_stop
2191	ELSE
2192	dopr_index(i) = 65
2193	dopr_unit(i) = 'psu m/s'
2194	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2195	ENDIF
2196
2197	CASE ( 'wsa' )
2198	IF ( .NOT. ocean ) THEN
2199	IF ( myid == 0 ) THEN
2200	PRINT*, '+++ check_parameters: data_output_pr = ', &
2201	data_output_pr(i), &
2202	' is not implemented for ocean = FALSE'
2203	ENDIF
2204	CALL local_stop
2205	ELSE
2206	dopr_index(i) = 66
2207	dopr_unit(i) = 'psu m/s'
2208	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2209	ENDIF
2210
2211	CASE ( 'wsa' )
2212	IF ( .NOT. ocean ) THEN
2213	IF ( myid == 0 ) THEN
2214	PRINT*, '+++ check_parameters: data_output_pr = ', &
2215	data_output_pr(i), &
2216	' is not implemented for ocean = FALSE'
2217	ENDIF
2218	CALL local_stop
2219	ELSE
2220	dopr_index(i) = 67
2221	dopr_unit(i) = 'psu m/s'
2222	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2223	ENDIF
2224
2225	CASE ( 'wp' )
2226	dopr_index(i) = 68
2227	dopr_unit(i) = 'm3/s3'
2228	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2229
2230	CASE ( 'w"e' )
2231	dopr_index(i) = 69
2232	dopr_unit(i) = 'm3/s3'
2233	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2234
2235
2236	CASE DEFAULT
2237
2238	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2239
2240	IF ( unit == 'illegal' ) THEN
2241	IF ( myid == 0 ) THEN
2242	IF ( data_output_pr_user(1) /= ' ' ) THEN
2243	PRINT*, '+++ check_parameters: illegal value for data_',&
2244	'output_pr or data_output_pr_user: "', &
2245	TRIM( data_output_pr(i) ), '"'
2246	ELSE
2247	PRINT*, '+++ check_parameters: illegal value for data_',&
2248	'output_pr: "', TRIM( data_output_pr(i) ),'"'
2249	ENDIF
2250	ENDIF
2251	CALL local_stop
2252	ENDIF
2253
2254	END SELECT
2255	!
2256	!-- Check to which of the predefined coordinate systems the profile belongs
2257	DO k = 1, crmax
2258	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2259	/=0 ) &
2260	THEN
2261	dopr_crossindex(i) = k
2262	EXIT
2263	ENDIF
2264	ENDDO
2265	!
2266	!-- Generate the text for the labels of the PROFIL output file. "-characters
2267	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2268	!-- control characters
2269	dopr_label(i) = data_output_pr(i)
2270	position = INDEX( dopr_label(i) , '"' )
2271	DO WHILE ( position /= 0 )
2272	dopr_label(i)(position:position) = ''''
2273	position = INDEX( dopr_label(i) , '"' )
2274	ENDDO
2275
2276	ENDDO
2277
2278	!
2279	!-- y-value range of the coordinate system (PROFIL).
2280	!-- x-value range determined in plot_1d.
2281	IF ( .NOT. ocean ) THEN
2282	cross_uymin = 0.0
2283	IF ( z_max_do1d == -1.0 ) THEN
2284	cross_uymax = zu(nzt+1)
2285	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2286	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
2287	z_max_do1d,' must be >= ', zu(nzb+1), &
2288	' or <= ', zu(nzt+1)
2289	CALL local_stop
2290	ELSE
2291	cross_uymax = z_max_do1d
2292	ENDIF
2293	ENDIF
2294
2295	!
2296	!-- Check whether the chosen normalizing factor for the coordinate systems is
2297	!-- permissible
2298	DO i = 1, crmax
2299	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2300
2301	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2302	j = 0
2303
2304	CASE DEFAULT
2305	IF ( myid == 0 ) THEN
2306	PRINT*, '+++ check_parameters: unknown normalize method'
2307	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
2308	ENDIF
2309	CALL local_stop
2310
2311	END SELECT
2312	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2313
2314	CASE ( '', 'z_i' )
2315	j = 0
2316
2317	CASE DEFAULT
2318	IF ( myid == 0 ) THEN
2319	PRINT*, '+++ check_parameters: unknown normalize method'
2320	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
2321	ENDIF
2322	CALL local_stop
2323
2324	END SELECT
2325	ENDDO
2326	!
2327	!-- Check normalized y-value range of the coordinate system (PROFIL)
2328	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2329	THEN
2330	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
2331	'd=', z_max_do1d_normalized, ' must be >= 0.0'
2332	CALL local_stop
2333	ENDIF
2334
2335
2336	!
2337	!-- Append user-defined data output variables to the standard data output
2338	IF ( data_output_user(1) /= ' ' ) THEN
2339	i = 1
2340	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2341	i = i + 1
2342	ENDDO
2343	j = 1
2344	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2345	IF ( i > 100 ) THEN
2346	IF ( myid == 0 ) THEN
2347	PRINT*, '+++ check_parameters: number of output quantitities', &
2348	' given by data_output and data_output_user'
2349	PRINT*, ' exceeds the limit of 100'
2350	ENDIF
2351	CALL local_stop
2352	ENDIF
2353	data_output(i) = data_output_user(j)
2354	i = i + 1
2355	j = j + 1
2356	ENDDO
2357	ENDIF
2358
2359	!
2360	!-- Check and set steering parameters for 2d/3d data output and averaging
2361	i = 1
2362	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2363	!
2364	!-- Check for data averaging
2365	ilen = LEN_TRIM( data_output(i) )
2366	j = 0 ! no data averaging
2367	IF ( ilen > 3 ) THEN
2368	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2369	j = 1 ! data averaging
2370	data_output(i) = data_output(i)(1:ilen-3)
2371	ENDIF
2372	ENDIF
2373	!
2374	!-- Check for cross section or volume data
2375	ilen = LEN_TRIM( data_output(i) )
2376	k = 0 ! 3d data
2377	var = data_output(i)(1:ilen)
2378	IF ( ilen > 3 ) THEN
2379	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2380	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2381	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2382	k = 1 ! 2d data
2383	var = data_output(i)(1:ilen-3)
2384	ENDIF
2385	ENDIF
2386	!
2387	!-- Check for allowed value and set units
2388	SELECT CASE ( TRIM( var ) )
2389
2390	CASE ( 'e' )
2391	IF ( constant_diffusion ) THEN
2392	IF ( myid == 0 ) THEN
2393	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2394	'" requires constant_diffusion = .FALSE.'
2395	ENDIF
2396	CALL local_stop
2397	ENDIF
2398	unit = 'm2/s2'
2399
2400	CASE ( 'pc', 'pr' )
2401	IF ( .NOT. particle_advection ) THEN
2402	IF ( myid == 0 ) THEN
2403	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2404	'" requires a "particles_par"-NAMELIST'
2405	PRINT*, ' in the parameter file (PARIN)'
2406	ENDIF
2407	CALL local_stop
2408	ENDIF
2409	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2410	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2411
2412	CASE ( 'q', 'vpt' )
2413	IF ( .NOT. humidity ) THEN
2414	IF ( myid == 0 ) THEN
2415	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2416	'" requires humidity = .TRUE.'
2417	ENDIF
2418	CALL local_stop
2419	ENDIF
2420	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2421	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2422
2423	CASE ( 'ql' )
2424	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2425	IF ( myid == 0 ) THEN
2426	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2427	'" requires cloud_physics = .TRUE.'
2428	PRINT*, ' or cloud_droplets = .TRUE.'
2429	ENDIF
2430	CALL local_stop
2431	ENDIF
2432	unit = 'kg/kg'
2433
2434	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2435	IF ( .NOT. cloud_droplets ) THEN
2436	IF ( myid == 0 ) THEN
2437	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2438	'" requires cloud_droplets = .TRUE.'
2439	ENDIF
2440	CALL local_stop
2441	ENDIF
2442	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2443	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2444	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2445
2446	CASE ( 'qv' )
2447	IF ( .NOT. cloud_physics ) THEN
2448	IF ( myid == 0 ) THEN
2449	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2450	'" requires cloud_physics = .TRUE.'
2451	ENDIF
2452	CALL local_stop
2453	ENDIF
2454	unit = 'kg/kg'
2455
2456	CASE ( 'rho' )
2457	IF ( .NOT. ocean ) THEN
2458	IF ( myid == 0 ) THEN
2459	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2460	'" requires ocean = .TRUE.'
2461	ENDIF
2462	CALL local_stop
2463	ENDIF
2464	unit = 'kg/m3'
2465
2466	CASE ( 's' )
2467	IF ( .NOT. passive_scalar ) THEN
2468	IF ( myid == 0 ) THEN
2469	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2470	'" requires passive_scalar = .TRUE.'
2471	ENDIF
2472	CALL local_stop
2473	ENDIF
2474	unit = 'conc'
2475
2476	CASE ( 'sa' )
2477	IF ( .NOT. ocean ) THEN
2478	IF ( myid == 0 ) THEN
2479	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2480	'" requires ocean = .TRUE.'
2481	ENDIF
2482	CALL local_stop
2483	ENDIF
2484	unit = 'psu'
2485
2486	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2487	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2488	IF ( myid == 0 ) THEN
2489	PRINT*, '+++ check_parameters: illegal value for data_',&
2490	'output: "', TRIM( var ), '" is only allowed'
2491	PRINT*, ' for horizontal cross section'
2492	ENDIF
2493	CALL local_stop
2494	ENDIF
2495	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2496	IF ( myid == 0 ) THEN
2497	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2498	'" requires cloud_physics = .TRUE.'
2499	ENDIF
2500	CALL local_stop
2501	ENDIF
2502	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2503	IF ( myid == 0 ) THEN
2504	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2505	'" requires precipitation = .TRUE.'
2506	ENDIF
2507	CALL local_stop
2508	ENDIF
2509	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2510	IF ( myid == 0 ) THEN
2511	PRINT*, '+++ check_parameters: temporal averaging of ', &
2512	' precipitation amount "', TRIM( var ), &
2513	'" not possible'
2514	ENDIF
2515	CALL local_stop
2516	ENDIF
2517	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2518	IF ( myid == 0 ) THEN
2519	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2520	'" requires precipitation = .TRUE.'
2521	ENDIF
2522	CALL local_stop
2523	ENDIF
2524
2525
2526	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2527	IF ( TRIM( var ) == 't*' ) unit = 'K'
2528	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2529	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2530	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2531	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2532
2533	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2534	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2535	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2536	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2537	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2538	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2539	CONTINUE
2540
2541	CASE DEFAULT
2542	CALL user_check_data_output( var, unit )
2543
2544	IF ( unit == 'illegal' ) THEN
2545	IF ( myid == 0 ) THEN
2546	IF ( data_output_user(1) /= ' ' ) THEN
2547	PRINT*, '+++ check_parameters: illegal value for data_',&
2548	'output or data_output_user: "', &
2549	TRIM( data_output(i) ), '"'
2550	ELSE
2551	PRINT*, '+++ check_parameters: illegal value for data_',&
2552	'output: "', TRIM( data_output(i) ), '"'
2553	ENDIF
2554	ENDIF
2555	CALL local_stop
2556	ENDIF
2557
2558	END SELECT
2559	!
2560	!-- Set the internal steering parameters appropriately
2561	IF ( k == 0 ) THEN
2562	do3d_no(j) = do3d_no(j) + 1
2563	do3d(j,do3d_no(j)) = data_output(i)
2564	do3d_unit(j,do3d_no(j)) = unit
2565	ELSE
2566	do2d_no(j) = do2d_no(j) + 1
2567	do2d(j,do2d_no(j)) = data_output(i)
2568	do2d_unit(j,do2d_no(j)) = unit
2569	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2570	data_output_xy(j) = .TRUE.
2571	ENDIF
2572	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2573	data_output_xz(j) = .TRUE.
2574	ENDIF
2575	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2576	data_output_yz(j) = .TRUE.
2577	ENDIF
2578	ENDIF
2579
2580	IF ( j == 1 ) THEN
2581	!
2582	!-- Check, if variable is already subject to averaging
2583	found = .FALSE.
2584	DO k = 1, doav_n
2585	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2586	ENDDO
2587
2588	IF ( .NOT. found ) THEN
2589	doav_n = doav_n + 1
2590	doav(doav_n) = var
2591	ENDIF
2592	ENDIF
2593
2594	i = i + 1
2595	ENDDO
2596
2597	!
2598	!-- Store sectional planes in one shared array
2599	section(:,1) = section_xy
2600	section(:,2) = section_xz
2601	section(:,3) = section_yz
2602
2603	!
2604	!-- Upper plot limit (grid point value) for 1D profiles
2605	IF ( z_max_do1d == -1.0 ) THEN
2606	nz_do1d = nzt+1
2607	ELSE
2608	DO k = nzb+1, nzt+1
2609	nz_do1d = k
2610	IF ( zw(k) > z_max_do1d ) EXIT
2611	ENDDO
2612	ENDIF
2613
2614	!
2615	!-- Upper plot limit for 2D vertical sections
2616	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2617	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2618	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
2619	z_max_do2d, ' must be >= ', zu(nzb+1), &
2620	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
2621	CALL local_stop
2622	ENDIF
2623
2624	!
2625	!-- Upper plot limit for 3D arrays
2626	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2627
2628	!
2629	!-- Determine and check accuracy for compressed 3D plot output
2630	IF ( do3d_compress ) THEN
2631	!
2632	!-- Compression only permissible on T3E machines
2633	IF ( host(1:3) /= 't3e' ) THEN
2634	IF ( myid == 0 ) THEN
2635	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
2636	'ed on host "', TRIM( host ), '"'
2637	ENDIF
2638	CALL local_stop
2639	ENDIF
2640
2641	i = 1
2642	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2643
2644	ilen = LEN_TRIM( do3d_comp_prec(i) )
2645	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2646	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2647	IF ( myid == 0 ) THEN
2648	PRINT*, '+++ check_parameters: illegal precision: ', &
2649	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
2650	ENDIF
2651	CALL local_stop
2652	ENDIF
2653
2654	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2655	var = do3d_comp_prec(i)(1:ilen-1)
2656
2657	SELECT CASE ( var )
2658
2659	CASE ( 'u' )
2660	j = 1
2661	CASE ( 'v' )
2662	j = 2
2663	CASE ( 'w' )
2664	j = 3
2665	CASE ( 'p' )
2666	j = 4
2667	CASE ( 'pt' )
2668	j = 5
2669
2670	CASE DEFAULT
2671	IF ( myid == 0 ) THEN
2672	PRINT*, '+++ check_parameters: unknown variable in ', &
2673	'assignment'
2674	PRINT*, ' do3d_comp_prec(', i, ')="', &
2675	TRIM( do3d_comp_prec(i) ),'"'
2676	ENDIF
2677	CALL local_stop
2678
2679	END SELECT
2680
2681	plot_3d_precision(j)%precision = prec
2682	i = i + 1
2683
2684	ENDDO
2685	ENDIF
2686
2687	!
2688	!-- Check the data output format(s)
2689	IF ( data_output_format(1) == ' ' ) THEN
2690	!
2691	!-- Default value
2692	netcdf_output = .TRUE.
2693	ELSE
2694	i = 1
2695	DO WHILE ( data_output_format(i) /= ' ' )
2696
2697	SELECT CASE ( data_output_format(i) )
2698
2699	CASE ( 'netcdf' )
2700	netcdf_output = .TRUE.
2701	CASE ( 'iso2d' )
2702	iso2d_output = .TRUE.
2703	CASE ( 'profil' )
2704	profil_output = .TRUE.
2705	CASE ( 'avs' )
2706	avs_output = .TRUE.
2707
2708	CASE DEFAULT
2709	IF ( myid == 0 ) THEN
2710	PRINT*, '+++ check_parameters:'
2711	PRINT*, ' unknown value for data_output_format "', &
2712	TRIM( data_output_format(i) ),'"'
2713	ENDIF
2714	CALL local_stop
2715
2716	END SELECT
2717
2718	i = i + 1
2719	IF ( i > 10 ) EXIT
2720
2721	ENDDO
2722
2723	ENDIF
2724
2725	!
2726	!-- Check netcdf precison
2727	ldum = .FALSE.
2728	CALL define_netcdf_header( 'ch', ldum, 0 )
2729
2730	!
2731	!-- Check, whether a constant diffusion coefficient shall be used
2732	IF ( km_constant /= -1.0 ) THEN
2733	IF ( km_constant < 0.0 ) THEN
2734	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2735	km_constant, ' < 0.0'
2736	CALL local_stop
2737	ELSE
2738	IF ( prandtl_number < 0.0 ) THEN
2739	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2740	prandtl_number, ' < 0.0'
2741	CALL local_stop
2742	ENDIF
2743	constant_diffusion = .TRUE.
2744
2745	IF ( prandtl_layer ) THEN
2746	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2747	'is not allowed with fixed value of km'
2748	CALL local_stop
2749	ENDIF
2750	ENDIF
2751	ENDIF
2752
2753	!
2754	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2755	!-- for the horizontal diffusivity used within the outflow damping layer,
2756	!-- and check/set the width of the damping layer
2757	IF ( bc_lr /= 'cyclic' ) THEN
2758	IF ( km_damp_max == -1.0 ) THEN
2759	km_damp_max = 0.5 * dx
2760	ENDIF
2761	IF ( outflow_damping_width == -1.0 ) THEN
2762	outflow_damping_width = MIN( 20, nx/2 )
2763	ENDIF
2764	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2765	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2766	'idth out of range'
2767	CALL local_stop
2768	ENDIF
2769	ENDIF
2770
2771	IF ( bc_ns /= 'cyclic' ) THEN
2772	IF ( km_damp_max == -1.0 ) THEN
2773	km_damp_max = 0.5 * dy
2774	ENDIF
2775	IF ( outflow_damping_width == -1.0 ) THEN
2776	outflow_damping_width = MIN( 20, ny/2 )
2777	ENDIF
2778	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2779	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2780	'idth out of range'
2781	CALL local_stop
2782	ENDIF
2783	ENDIF
2784
2785	!
2786	!-- Check value range for rif
2787	IF ( rif_min >= rif_max ) THEN
2788	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2789	' must be less than rif_max=', rif_max
2790	CALL local_stop
2791	ENDIF
2792
2793	!
2794	!-- Determine upper and lower hight level indices for random perturbations
2795	IF ( disturbance_level_b == -9999999.9 ) THEN
2796	IF ( ocean ) THEN
2797	disturbance_level_b = zu((nzt*2)/3)
2798	disturbance_level_ind_b = ( nzt * 2 ) / 3
2799	ELSE
2800	disturbance_level_b = zu(nzb+3)
2801	disturbance_level_ind_b = nzb + 3
2802	ENDIF
2803	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2804	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2805	disturbance_level_b, ' must be >= ',zu(3), &
2806	'(zu(3))'
2807	CALL local_stop
2808	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2809	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2810	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2811	'(zu(nzt-2))'
2812	CALL local_stop
2813	ELSE
2814	DO k = 3, nzt-2
2815	IF ( disturbance_level_b <= zu(k) ) THEN
2816	disturbance_level_ind_b = k
2817	EXIT
2818	ENDIF
2819	ENDDO
2820	ENDIF
2821
2822	IF ( disturbance_level_t == -9999999.9 ) THEN
2823	IF ( ocean ) THEN
2824	disturbance_level_t = zu(nzt-3)
2825	disturbance_level_ind_t = nzt - 3
2826	ELSE
2827	disturbance_level_t = zu(nzt/3)
2828	disturbance_level_ind_t = nzt / 3
2829	ENDIF
2830	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2831	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2832	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2833	'(zu(nzt-2))'
2834	CALL local_stop
2835	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2836	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2837	disturbance_level_t, ' must be >= ', &
2838	'disturbance_level_b=', disturbance_level_b
2839	CALL local_stop
2840	ELSE
2841	DO k = 3, nzt-2
2842	IF ( disturbance_level_t <= zu(k) ) THEN
2843	disturbance_level_ind_t = k
2844	EXIT
2845	ENDIF
2846	ENDDO
2847	ENDIF
2848
2849	!
2850	!-- Check again whether the levels determined this way are ok.
2851	!-- Error may occur at automatic determination and too few grid points in
2852	!-- z-direction.
2853	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2854	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2855	'disturbance_level_ind_t=', &
2856	disturbance_level_ind_t, ' must be >= ', &
2857	'disturbance_level_ind_b=', &
2858	disturbance_level_ind_b
2859	CALL local_stop
2860	ENDIF
2861
2862	!
2863	!-- Determine the horizontal index range for random perturbations.
2864	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2865	!-- near the inflow and the perturbation area is further limited to ...(1)
2866	!-- after the initial phase of the flow.
2867	dist_nxl = 0; dist_nxr = nx
2868	dist_nys = 0; dist_nyn = ny
2869	IF ( bc_lr /= 'cyclic' ) THEN
2870	IF ( inflow_disturbance_begin == -1 ) THEN
2871	inflow_disturbance_begin = MIN( 10, nx/2 )
2872	ENDIF
2873	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2874	THEN
2875	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2876	'_begin out of range'
2877	CALL local_stop
2878	ENDIF
2879	IF ( inflow_disturbance_end == -1 ) THEN
2880	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2881	ENDIF
2882	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2883	THEN
2884	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2885	'_end out of range'
2886	CALL local_stop
2887	ENDIF
2888	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2889	IF ( inflow_disturbance_begin == -1 ) THEN
2890	inflow_disturbance_begin = MIN( 10, ny/2 )
2891	ENDIF
2892	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2893	THEN
2894	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2895	'_begin out of range'
2896	CALL local_stop
2897	ENDIF
2898	IF ( inflow_disturbance_end == -1 ) THEN
2899	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2900	ENDIF
2901	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2902	THEN
2903	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2904	'_end out of range'
2905	CALL local_stop
2906	ENDIF
2907	ENDIF
2908
2909	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2910	dist_nxr = nx - inflow_disturbance_begin
2911	dist_nxl(1) = nx - inflow_disturbance_end
2912	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2913	dist_nxl = inflow_disturbance_begin
2914	dist_nxr(1) = inflow_disturbance_end
2915	ENDIF
2916	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2917	dist_nyn = ny - inflow_disturbance_begin
2918	dist_nys(1) = ny - inflow_disturbance_end
2919	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2920	dist_nys = inflow_disturbance_begin
2921	dist_nyn(1) = inflow_disturbance_end
2922	ENDIF
2923
2924	!
2925	!-- Check random generator
2926	IF ( random_generator /= 'system-specific' .AND. &
2927	random_generator /= 'numerical-recipes' ) THEN
2928	IF ( myid == 0 ) THEN
2929	PRINT*, '+++ check_parameters:'
2930	PRINT*, ' unknown random generator: random_generator=', &
2931	random_generator
2932	ENDIF
2933	CALL local_stop
2934	ENDIF
2935
2936	!
2937	!-- Determine damping level index for 1D model
2938	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2939	IF ( damp_level_1d == -1.0 ) THEN
2940	damp_level_1d = zu(nzt+1)
2941	damp_level_ind_1d = nzt + 1
2942	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2943	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
2944	damp_level_1d, ' must be > 0.0 and < ', &
2945	'zu(nzt+1)', zu(nzt+1)
2946	CALL local_stop
2947	ELSE
2948	DO k = 1, nzt+1
2949	IF ( damp_level_1d <= zu(k) ) THEN
2950	damp_level_ind_1d = k
2951	EXIT
2952	ENDIF
2953	ENDDO
2954	ENDIF
2955	ENDIF
2956	!
2957	!-- Check some other 1d-model parameters
2958	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2959	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2960	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
2961	TRIM( mixing_length_1d ), '" is unknown'
2962	CALL local_stop
2963	ENDIF
2964	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2965	TRIM( dissipation_1d ) /= 'detering' ) THEN
2966	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
2967	TRIM( dissipation_1d ), '" is unknown'
2968	CALL local_stop
2969	ENDIF
2970
2971	!
2972	!-- Set time for the next user defined restart (time_restart is the
2973	!-- internal parameter for steering restart events)
2974	IF ( restart_time /= 9999999.9 ) THEN
2975	IF ( restart_time > simulated_time ) time_restart = restart_time
2976	ELSE
2977	!
2978	!-- In case of a restart run, set internal parameter to default (no restart)
2979	!-- if the NAMELIST-parameter restart_time is omitted
2980	time_restart = 9999999.9
2981	ENDIF
2982
2983	!
2984	!-- Set default value of the time needed to terminate a model run
2985	IF ( termination_time_needed == -1.0 ) THEN
2986	IF ( host(1:3) == 'ibm' ) THEN
2987	termination_time_needed = 300.0
2988	ELSE
2989	termination_time_needed = 35.0
2990	ENDIF
2991	ENDIF
2992
2993	!
2994	!-- Check the time needed to terminate a model run
2995	IF ( host(1:3) == 't3e' ) THEN
2996	!
2997	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2998	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2999	IF ( termination_time_needed <= 30.0 ) THEN
3000	IF ( myid == 0 ) THEN
3001	PRINT*, '+++ check_parameters: termination_time_needed', &
3002	termination_time_needed
3003	PRINT*, ' must be > 30.0 on host "', host, &
3004	'"'
3005	ENDIF
3006	CALL local_stop
3007	ENDIF
3008	ELSEIF ( host(1:3) == 'ibm' ) THEN
3009	!
3010	!-- On IBM-regatta machines the time should be at least 300 seconds,
3011	!-- because the job time consumed before executing palm (for compiling,
3012	!-- copying of files, etc.) has to be regarded
3013	IF ( termination_time_needed < 300.0 ) THEN
3014	IF ( myid == 0 ) THEN
3015	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
3016	'needed', termination_time_needed
3017	PRINT*, ' should be >= 300.0', &
3018	' on host "', host, '"'
3019	ENDIF
3020	ENDIF
3021	ENDIF
3022
3023
3024	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |