Home

Context Navigation

check_parameters.f90 @ 113

Last change on this file since 113 was 110, checked in by raasch, 17 years ago

New:
---
Allows runs for a coupled atmosphere-ocean LES,
coupling frequency is controlled by new d3par-parameter dt_coupling,
the coupling mode (atmosphere_to_ocean or ocean_to_atmosphere) for the
respective processes is read from environment variable coupling_mode,
which is set by the mpiexec-command,
communication between the two models is done using the intercommunicator
comm_inter,
local files opened by the ocean model get the additional suffic "_O".
Assume saturation at k=nzb_s_inner(j,i) for atmosphere coupled to ocean.

A momentum flux can be set as top boundary condition using the new
inipar parameter top_momentumflux_u|v.

Non-cyclic boundary conditions can be used along all horizontal directions.

Quantities w*p* and w"e can be output as vertical profiles.

Initial profiles are reset to constant profiles in case that initializing_actions /= 'set_constant_profiles'. (init_rankine)

Optionally calculate km and kh from initial TKE e_init.

Changed:

Remaining variables iran changed to iran_part (advec_particles, init_particles).

In case that the presure solver is not called for every Runge-Kutta substep
(call_psolver_at_all_substeps = .F.), it is called after the first substep
instead of the last. In that case, random perturbations are also added to the
velocity field after the first substep.

Initialization of km,kh = 0.00001 for ocean = .T. (for ocean = .F. it remains 0.01).

Allow data_output_pr= q, wq, w"q", w*q* for humidity = .T. (instead of cloud_physics = .T.).

Errors:

Bugs from code parts for non-cyclic boundary conditions are removed: loops for
u and v are starting from index nxlu, nysv, respectively. The radiation boundary
condition is used for every Runge-Kutta substep. Velocity phase speeds for
the radiation boundary conditions are calculated for the first Runge-Kutta
substep only and reused for the further substeps. New arrays c_u, c_v, and c_w
are defined for this purpose. Several index errors are removed from the
radiation boundary condition code parts. Upper bounds for calculating
u_0 and v_0 (in production_e) are nxr+1 and nyn+1 because otherwise these
values are not available in case of non-cyclic boundary conditions.

+dots_num_palm in module user, +module netcdf_control in user_init (both in user_interface)

Bugfix: wrong sign removed from the buoyancy production term in the case use_reference = .T. (production_e)

Bugfix: Error message concerning output of particle concentration (pc) modified (check_parameters).

Bugfix: Rayleigh damping for ocean fixed.

Property svn:keywords set to Id

File size: 109.0 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 110 2007-10-05 05:13:14Z raasch $
11	!
12	! 109 2007-08-28 15:26:47Z letzel
13	! Check coupling_mode and set default (obligatory) values (like boundary
14	! conditions for temperature and fluxes) in case of coupled runs.
15	! +profiles for wp and w"e
16	! Bugfix: Error message concerning output of particle concentration (pc)
17	! modified
18	! More checks and more default values for coupled runs
19	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
20	! cloud_physics = .T.)
21	! Rayleigh damping for ocean fixed.
22	! Check and, if necessary, set default value for dt_coupling
23	!
24	! 97 2007-06-21 08:23:15Z raasch
25	! Initial salinity profile is calculated, salinity boundary conditions are
26	! checked,
27	! z_max_do1d is checked only in case of ocean = .f.,
28	! +initial temperature and geostrophic velocity profiles for the ocean version,
29	! use_pt_reference renamed use_reference
30	!
31	! 89 2007-05-25 12:08:31Z raasch
32	! Check for user-defined profiles
33	!
34	! 75 2007-03-22 09:54:05Z raasch
35	! "by_user" allowed as initializing action, -data_output_ts,
36	! leapfrog with non-flat topography not allowed any more, loop_optimization
37	! and pt_reference are checked, moisture renamed humidity,
38	! output of precipitation amount/rate and roughnes length + check
39	! possible negative humidities are avoided in initial profile,
40	! dirichlet/neumann changed to dirichlet/radiation, etc.,
41	! revision added to run_description_header
42	!
43	! 20 2007-02-26 00:12:32Z raasch
44	! Temperature and humidity gradients at top are now calculated for nzt+1,
45	! top_heatflux and respective boundary condition bc_pt_t is checked
46	!
47	! RCS Log replace by Id keyword, revision history cleaned up
48	!
49	! Revision 1.61 2006/08/04 14:20:25 raasch
50	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
51	! use_upstream_for_tke, default value for dt_dopts,
52	! generation of file header moved from routines palm and header to here
53	!
54	! Revision 1.1 1997/08/26 06:29:23 raasch
55	! Initial revision
56	!
57	!
58	! Description:
59	! ------------
60	! Check control parameters and deduce further quantities.
61	!------------------------------------------------------------------------------!
62
63	USE arrays_3d
64	USE constants
65	USE control_parameters
66	USE grid_variables
67	USE indices
68	USE model_1d
69	USE netcdf_control
70	USE particle_attributes
71	USE pegrid
72	USE profil_parameter
73	USE statistics
74	USE transpose_indices
75
76	IMPLICIT NONE
77
78	CHARACTER (LEN=1) :: sq
79	CHARACTER (LEN=6) :: var
80	CHARACTER (LEN=7) :: unit
81	CHARACTER (LEN=8) :: date
82	CHARACTER (LEN=10) :: time
83	CHARACTER (LEN=40) :: coupling_string
84	CHARACTER (LEN=100) :: action
85
86	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
87	position, prec
88	LOGICAL :: found, ldum
89	REAL :: gradient, maxn, maxp, remote = 0.0
90
91	!
92	!-- Warning, if host is not set
93	IF ( host(1:1) == ' ' ) THEN
94	IF ( myid == 0 ) THEN
95	PRINT*, '+++ WARNING: check_parameters:'
96	PRINT*, ' "host" is not set. Please check that environment', &
97	' variable "localhost"'
98	PRINT*, ' is set before running PALM'
99	ENDIF
100	ENDIF
101
102	!
103	!-- Check the coupling mode
104	IF ( coupling_mode /= 'uncoupled' .AND. &
105	coupling_mode /= 'atmosphere_to_ocean' .AND. &
106	coupling_mode /= 'ocean_to_atmosphere' ) THEN
107	IF ( myid == 0 ) THEN
108	PRINT*, '+++ check_parameters:'
109	PRINT*, ' illegal coupling mode: ', TRIM( coupling_mode )
110	ENDIF
111	CALL local_stop
112	ENDIF
113
114	!
115	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
116	IF ( coupling_mode /= 'uncoupled' ) THEN
117	IF ( dt_coupling == 9999999.9 ) THEN
118	IF ( myid == 0 ) THEN
119	PRINT*, '+++ check_parameters:'
120	PRINT*, ' dt_coupling is not set but required for coupling ', &
121	'mode: ', TRIM( coupling_mode )
122	ENDIF
123	CALL local_stop
124	ENDIF
125	#if defined( __parallel ) && defined( __mpi2 )
126	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, myid, 11, comm_inter, ierr )
127	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 11, comm_inter, status, ierr )
128	IF ( dt_coupling /= remote ) THEN
129	IF ( myid == 0 ) THEN
130	PRINT*, '+++ check_parameters:'
131	PRINT*, ' TRIM( coupling_mode ): dt_coupling = ', dt_coupling
132	PRINT*, ' is not equal to dt_coupling_remote = ', remote
133	ENDIF
134	CALL local_stop
135	ENDIF
136	IF ( dt_coupling <= 0.0 ) THEN
137	CALL MPI_SEND( dt_max, 1, MPI_REAL, myid, 19, comm_inter, ierr )
138	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 19, comm_inter, status, &
139	ierr )
140	dt_coupling = MAX( dt_max, remote )
141	IF ( myid == 0 ) THEN
142	PRINT*, '+++ check_parameters:'
143	PRINT*, ' TRIM( coupling_mode ): dt_coupling <= 0.0'
144	PRINT*, ' is not allowed and is reset to MAX(dt_max(A,O)) = ', &
145	dt_coupling
146	ENDIF
147	ENDIF
148	CALL MPI_SEND( restart_time, 1, MPI_REAL, myid, 12, comm_inter, ierr )
149	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 12, comm_inter, status, ierr )
150	IF ( restart_time /= remote ) THEN
151	IF ( myid == 0 ) THEN
152	PRINT*, '+++ check_parameters:'
153	PRINT*, ' TRIM( coupling_mode ): restart_time = ', restart_time
154	PRINT*, ' is not equal to restart_time_remote = ', remote
155	ENDIF
156	CALL local_stop
157	ENDIF
158	CALL MPI_SEND( dt_restart, 1, MPI_REAL, myid, 13, comm_inter, ierr )
159	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 13, comm_inter, status, ierr )
160	IF ( dt_restart /= remote ) THEN
161	IF ( myid == 0 ) THEN
162	PRINT*, '+++ check_parameters:'
163	PRINT*, ' TRIM( coupling_mode ): dt_restart = ', dt_restart
164	PRINT*, ' is not equal to dt_restart_remote = ', remote
165	ENDIF
166	CALL local_stop
167	ENDIF
168	CALL MPI_SEND( end_time, 1, MPI_REAL, myid, 14, comm_inter, ierr )
169	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 14, comm_inter, status, ierr )
170	IF ( end_time /= remote ) THEN
171	IF ( myid == 0 ) THEN
172	PRINT*, '+++ check_parameters:'
173	PRINT*, ' TRIM( coupling_mode ): end_time = ', end_time
174	PRINT*, ' is not equal to end_time_remote = ', remote
175	ENDIF
176	CALL local_stop
177	ENDIF
178	CALL MPI_SEND( dx, 1, MPI_REAL, myid, 15, comm_inter, ierr )
179	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 15, comm_inter, status, ierr )
180	IF ( dx /= remote ) THEN
181	IF ( myid == 0 ) THEN
182	PRINT*, '+++ check_parameters:'
183	PRINT*, ' TRIM( coupling_mode ): dx = ', dx
184	PRINT*, ' is not equal to dx_remote = ', remote
185	ENDIF
186	CALL local_stop
187	ENDIF
188	CALL MPI_SEND( dy, 1, MPI_REAL, myid, 16, comm_inter, ierr )
189	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 16, comm_inter, status, ierr )
190	IF ( dy /= remote ) THEN
191	IF ( myid == 0 ) THEN
192	PRINT*, '+++ check_parameters:'
193	PRINT*, ' TRIM( coupling_mode ): dy = ', dy
194	PRINT*, ' is not equal to dy_remote = ', remote
195	ENDIF
196	CALL local_stop
197	ENDIF
198	CALL MPI_SEND( nx, 1, MPI_INTEGER, myid, 17, comm_inter, ierr )
199	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 17, comm_inter, status, &
200	ierr )
201	IF ( nx /= iremote ) THEN
202	IF ( myid == 0 ) THEN
203	PRINT*, '+++ check_parameters:'
204	PRINT*, ' TRIM( coupling_mode ): nx = ', nx
205	PRINT*, ' is not equal to nx_remote = ', iremote
206	ENDIF
207	CALL local_stop
208	ENDIF
209	CALL MPI_SEND( ny, 1, MPI_INTEGER, myid, 18, comm_inter, ierr )
210	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 18, comm_inter, status, &
211	ierr )
212	IF ( ny /= iremote ) THEN
213	IF ( myid == 0 ) THEN
214	PRINT*, '+++ check_parameters:'
215	PRINT*, ' TRIM( coupling_mode ): ny = ', ny
216	PRINT*, ' is not equal to ny_remote = ', iremote
217	ENDIF
218	CALL local_stop
219	ENDIF
220	#endif
221	ENDIF
222
223	#if defined( __parallel ) && defined( __mpi2 )
224	!
225	!-- Exchange via intercommunicator
226	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
227	CALL MPI_SEND( humidity, &
228	1, MPI_LOGICAL, myid, 19, comm_inter, ierr )
229	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
230	CALL MPI_RECV( humidity_remote, &
231	1, MPI_LOGICAL, myid, 19, comm_inter, status, ierr )
232	ENDIF
233	#endif
234
235
236	!
237	!-- Generate the file header which is used as a header for most of PALM's
238	!-- output files
239	CALL DATE_AND_TIME( date, time )
240	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
241	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
242	IF ( coupling_mode == 'uncoupled' ) THEN
243	coupling_string = ''
244	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
245	coupling_string = ' coupled (atmosphere)'
246	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
247	coupling_string = ' coupled (ocean)'
248	ENDIF
249
250	WRITE ( run_description_header, &
251	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
252	TRIM( version ), TRIM( revision ), 'run: ', &
253	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
254	'host: ', TRIM( host ), run_date, run_time
255
256	!
257	!-- Check the general loop optimization method
258	IF ( loop_optimization == 'default' ) THEN
259	IF ( host(1:3) == 'nec' ) THEN
260	loop_optimization = 'vector'
261	ELSE
262	loop_optimization = 'cache'
263	ENDIF
264	ENDIF
265	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
266	.AND. loop_optimization /= 'vector' ) THEN
267	IF ( myid == 0 ) THEN
268	PRINT*, '+++ check_parameters:'
269	PRINT*, ' illegal value given for loop_optimization: ', &
270	TRIM( loop_optimization )
271	ENDIF
272	CALL local_stop
273	ENDIF
274
275	!
276	!-- Check topography setting (check for illegal parameter combinations)
277	IF ( topography /= 'flat' ) THEN
278	action = ' '
279	IF ( scalar_advec /= 'pw-scheme' ) THEN
280	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
281	ENDIF
282	IF ( momentum_advec /= 'pw-scheme' ) THEN
283	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
284	ENDIF
285	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
286	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
287	ENDIF
288	IF ( psolver == 'multigrid' .OR. psolver == 'sor' ) THEN
289	WRITE( action, '(A,A)' ) 'psolver = ', psolver
290	ENDIF
291	IF ( sloping_surface ) THEN
292	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
293	ENDIF
294	IF ( galilei_transformation ) THEN
295	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
296	ENDIF
297	IF ( cloud_physics ) THEN
298	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
299	ENDIF
300	IF ( cloud_droplets ) THEN
301	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
302	ENDIF
303	IF ( humidity ) THEN
304	WRITE( action, '(A)' ) 'humidity = .TRUE.'
305	ENDIF
306	IF ( .NOT. prandtl_layer ) THEN
307	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
308	ENDIF
309	IF ( action /= ' ' ) THEN
310	IF ( myid == 0 ) THEN
311	PRINT*, '+++ check_parameters:'
312	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
313	ENDIF
314	CALL local_stop
315	ENDIF
316	ENDIF
317
318	!
319	!-- Check ocean setting
320	IF ( ocean ) THEN
321	action = ' '
322	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
323	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
324	ENDIF
325	IF ( momentum_advec == 'ups-scheme' ) THEN
326	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
327	ENDIF
328	IF ( action /= ' ' ) THEN
329	IF ( myid == 0 ) THEN
330	PRINT*, '+++ check_parameters:'
331	PRINT*, ' ocean = .T. does not allow ', TRIM( action )
332	ENDIF
333	CALL local_stop
334	ENDIF
335	ENDIF
336
337	!
338	!-- Check whether there are any illegal values
339	!-- Pressure solver:
340	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
341	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
342	IF ( myid == 0 ) THEN
343	PRINT*, '+++ check_parameters:'
344	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
345	psolver
346	ENDIF
347	CALL local_stop
348	ENDIF
349
350	#if defined( __parallel )
351	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
352	IF ( myid == 0 ) THEN
353	PRINT*, '+++ check_parameters:'
354	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
355	'1d domain-decomposition along x'
356	PRINT*, ' please do not set npey/=1 in the parameter file'
357	ENDIF
358	CALL local_stop
359	ENDIF
360	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
361	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
362	IF ( myid == 0 ) THEN
363	PRINT*, '+++ check_parameters:'
364	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
365	'subdomains with unequal size'
366	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
367	' file'
368	ENDIF
369	CALL local_stop
370	ENDIF
371	#else
372	IF ( psolver == 'poisfft_hybrid' ) THEN
373	IF ( myid == 0 ) THEN
374	PRINT*, '+++ check_parameters:'
375	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
376	'parallel environment'
377	ENDIF
378	CALL local_stop
379	ENDIF
380	#endif
381
382	IF ( psolver == 'multigrid' ) THEN
383	IF ( cycle_mg == 'w' ) THEN
384	gamma_mg = 2
385	ELSEIF ( cycle_mg == 'v' ) THEN
386	gamma_mg = 1
387	ELSE
388	IF ( myid == 0 ) THEN
389	PRINT*, '+++ check_parameters:'
390	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
391	ENDIF
392	CALL local_stop
393	ENDIF
394	ENDIF
395
396	IF ( fft_method /= 'singleton-algorithm' .AND. &
397	fft_method /= 'temperton-algorithm' .AND. &
398	fft_method /= 'system-specific' ) THEN
399	IF ( myid == 0 ) THEN
400	PRINT*, '+++ check_parameters:'
401	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
402	ENDIF
403	CALL local_stop
404	ENDIF
405
406	!
407	!-- Advection schemes:
408	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
409	THEN
410	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
411	'scheme: momentum_advec=', momentum_advec
412	CALL local_stop
413	ENDIF
414	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
415	.AND. timestep_scheme /= 'euler' ) THEN
416	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
417	momentum_advec, ' is not allowed with ', &
418	'timestep_scheme=', timestep_scheme
419	CALL local_stop
420	ENDIF
421
422	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
423	scalar_advec /= 'ups-scheme' ) THEN
424	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
425	'scheme: scalar_advec=', scalar_advec
426	CALL local_stop
427	ENDIF
428
429	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
430	use_upstream_for_tke = .TRUE.
431	IF ( myid == 0 ) THEN
432	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
433	'.TRUE. because use_sgs_for_particles = .TRUE.'
434	ENDIF
435	ENDIF
436
437	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
438	IF ( myid == 0 ) THEN
439	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
440	'not allowed with timestep_scheme=', timestep_scheme
441	ENDIF
442	CALL local_stop
443	ENDIF
444
445	!
446	!-- Timestep schemes:
447	SELECT CASE ( TRIM( timestep_scheme ) )
448
449	CASE ( 'euler' )
450	intermediate_timestep_count_max = 1
451	asselin_filter_factor = 0.0
452
453	CASE ( 'leapfrog', 'leapfrog+euler' )
454	intermediate_timestep_count_max = 1
455
456	CASE ( 'runge-kutta-2' )
457	intermediate_timestep_count_max = 2
458	asselin_filter_factor = 0.0
459
460	CASE ( 'runge-kutta-3' )
461	intermediate_timestep_count_max = 3
462	asselin_filter_factor = 0.0
463
464	CASE DEFAULT
465	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
466	'scheme: timestep_scheme=', timestep_scheme
467	CALL local_stop
468
469	END SELECT
470
471	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
472	THEN
473	IF ( myid == 0 ) THEN
474	PRINT*, '+++ check_parameters: scalar advection scheme "', &
475	TRIM( scalar_advec ), '"'
476	PRINT*, ' does not work with timestep_scheme "', &
477	TRIM( timestep_scheme ), '"'
478	ENDIF
479	CALL local_stop
480	ENDIF
481
482	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
483	THEN
484	IF ( myid == 0 ) THEN
485	PRINT*, '+++ check_parameters: momentum advection scheme "', &
486	TRIM( momentum_advec ), '"'
487	PRINT*, ' does not work with timestep_scheme "', &
488	TRIM( timestep_scheme ), '"'
489	ENDIF
490	CALL local_stop
491	ENDIF
492
493
494	IF ( initializing_actions == ' ' ) THEN
495	IF ( myid == 0 ) THEN
496	PRINT*, '+++ check parameters:'
497	PRINT*, ' no value found for initializing_actions'
498	ENDIF
499	CALL local_stop
500	ENDIF
501
502	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
503	!
504	!-- No model continuation run; several initialising actions are possible
505	action = initializing_actions
506	DO WHILE ( TRIM( action ) /= '' )
507	position = INDEX( action, ' ' )
508	SELECT CASE ( action(1:position-1) )
509
510	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
511	'by_user', 'initialize_vortex', 'initialize_ptanom' )
512	action = action(position+1:)
513
514	CASE DEFAULT
515	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
516	'ng_action unkown or not allowed: action = "', &
517	TRIM(action), '"'
518	CALL local_stop
519
520	END SELECT
521	ENDDO
522	ENDIF
523	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
524	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
525	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
526	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
527	' allowed simultaneously'
528	CALL local_stop
529	ENDIF
530	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
531	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
532	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
533	'"set_constant_profiles" and "by_user" are not', &
534	' allowed simultaneously'
535	CALL local_stop
536	ENDIF
537	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
538	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
539	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
540	'"by_user" and "set_1d-model_profiles" are not', &
541	' allowed simultaneously'
542	CALL local_stop
543	ENDIF
544
545	IF ( cloud_physics .AND. .NOT. humidity ) THEN
546	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
547	cloud_physics, ' is not allowed with ', &
548	'humidity =', humidity
549	CALL local_stop
550	ENDIF
551
552	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
553	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
554	precipitation, ' is not allowed with ', &
555	'cloud_physics =', cloud_physics
556	CALL local_stop
557	ENDIF
558
559	IF ( humidity .AND. sloping_surface ) THEN
560	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE', &
561	'and hang = TRUE are not', &
562	' allowed simultaneously'
563	CALL local_stop
564	ENDIF
565
566	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
567	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
568	'is not implemented for humidity'
569	CALL local_stop
570	ENDIF
571
572	IF ( passive_scalar .AND. humidity ) THEN
573	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE and', &
574	'passive_scalar = TRUE is not allowed ', &
575	'simultaneously'
576	CALL local_stop
577	ENDIF
578
579	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
580	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
581	'is not implemented for passive_scalar'
582	CALL local_stop
583	ENDIF
584
585	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
586	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
587	TRIM( grid_matching ), &
588	'" found for parameter grid_matching'
589	CALL local_stop
590	ENDIF
591
592	!
593	!-- In case of no model continuation run, check initialising parameters and
594	!-- deduce further quantities
595	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
596
597	!
598	!-- Initial profiles for 1D and 3D model, respectively
599	u_init = ug_surface
600	v_init = vg_surface
601	pt_init = pt_surface
602	IF ( humidity ) q_init = q_surface
603	IF ( ocean ) sa_init = sa_surface
604	IF ( passive_scalar ) q_init = s_surface
605
606	!
607	!--
608	!-- If required, compute initial profile of the geostrophic wind
609	!-- (component ug)
610	i = 1
611	gradient = 0.0
612
613	IF ( .NOT. ocean ) THEN
614
615	ug_vertical_gradient_level_ind(1) = 0
616	ug(0) = ug_surface
617	DO k = 1, nzt+1
618	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
619	ug_vertical_gradient_level(i) >= 0.0 ) THEN
620	gradient = ug_vertical_gradient(i) / 100.0
621	ug_vertical_gradient_level_ind(i) = k - 1
622	i = i + 1
623	IF ( i > 10 ) THEN
624	IF ( myid == 0 ) THEN
625	PRINT*, '+++ check_parameters: upper bound 10 of array', &
626	' "ug_vertical_gradient_level_ind" exceeded'
627	ENDIF
628	CALL local_stop
629	ENDIF
630	ENDIF
631	IF ( gradient /= 0.0 ) THEN
632	IF ( k /= 1 ) THEN
633	ug(k) = ug(k-1) + dzu(k) * gradient
634	ELSE
635	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
636	ENDIF
637	ELSE
638	ug(k) = ug(k-1)
639	ENDIF
640	ENDDO
641
642	ELSE
643
644	ug_vertical_gradient_level_ind(1) = nzt+1
645	DO k = nzt, 0, -1
646	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
647	ug_vertical_gradient_level(i) <= 0.0 ) THEN
648	gradient = ug_vertical_gradient(i) / 100.0
649	ug_vertical_gradient_level_ind(i) = k + 1
650	i = i + 1
651	IF ( i > 10 ) THEN
652	IF ( myid == 0 ) THEN
653	PRINT*, '+++ check_parameters: upper bound 10 of array', &
654	' "ug_vertical_gradient_level_ind" exceeded'
655	ENDIF
656	CALL local_stop
657	ENDIF
658	ENDIF
659	IF ( gradient /= 0.0 ) THEN
660	IF ( k /= nzt ) THEN
661	ug(k) = ug(k+1) - dzu(k+1) * gradient
662	ELSE
663	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
664	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
665	ENDIF
666	ELSE
667	ug(k) = ug(k+1)
668	ENDIF
669	ENDDO
670
671	ENDIF
672
673	u_init = ug
674
675	!
676	!-- In case of no given gradients for ug, choose a vanishing gradient
677	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
678	ug_vertical_gradient_level(1) = 0.0
679	ENDIF
680
681	!
682	!--
683	!-- If required, compute initial profile of the geostrophic wind
684	!-- (component vg)
685	i = 1
686	gradient = 0.0
687
688	IF ( .NOT. ocean ) THEN
689
690	vg_vertical_gradient_level_ind(1) = 0
691	vg(0) = vg_surface
692	DO k = 1, nzt+1
693	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
694	vg_vertical_gradient_level(i) >= 0.0 ) THEN
695	gradient = vg_vertical_gradient(i) / 100.0
696	vg_vertical_gradient_level_ind(i) = k - 1
697	i = i + 1
698	IF ( i > 10 ) THEN
699	IF ( myid == 0 ) THEN
700	PRINT*, '+++ check_parameters: upper bound 10 of array', &
701	' "vg_vertical_gradient_level_ind" exceeded'
702	ENDIF
703	CALL local_stop
704	ENDIF
705	ENDIF
706	IF ( gradient /= 0.0 ) THEN
707	IF ( k /= 1 ) THEN
708	vg(k) = vg(k-1) + dzu(k) * gradient
709	ELSE
710	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
711	ENDIF
712	ELSE
713	vg(k) = vg(k-1)
714	ENDIF
715	ENDDO
716
717	ELSE
718
719	vg_vertical_gradient_level_ind(1) = 0
720	DO k = nzt, 0, -1
721	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
722	vg_vertical_gradient_level(i) <= 0.0 ) THEN
723	gradient = vg_vertical_gradient(i) / 100.0
724	vg_vertical_gradient_level_ind(i) = k + 1
725	i = i + 1
726	IF ( i > 10 ) THEN
727	IF ( myid == 0 ) THEN
728	PRINT*, '+++ check_parameters: upper bound 10 of array', &
729	' "vg_vertical_gradient_level_ind" exceeded'
730	ENDIF
731	CALL local_stop
732	ENDIF
733	ENDIF
734	IF ( gradient /= 0.0 ) THEN
735	IF ( k /= nzt ) THEN
736	vg(k) = vg(k+1) - dzu(k+1) * gradient
737	ELSE
738	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
739	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
740	ENDIF
741	ELSE
742	vg(k) = vg(k+1)
743	ENDIF
744	ENDDO
745
746	ENDIF
747
748	v_init = vg
749
750	!
751	!-- In case of no given gradients for vg, choose a vanishing gradient
752	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
753	vg_vertical_gradient_level(1) = 0.0
754	ENDIF
755
756	!
757	!-- Compute initial temperature profile using the given temperature gradients
758	i = 1
759	gradient = 0.0
760
761	IF ( .NOT. ocean ) THEN
762
763	pt_vertical_gradient_level_ind(1) = 0
764	DO k = 1, nzt+1
765	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
766	pt_vertical_gradient_level(i) >= 0.0 ) THEN
767	gradient = pt_vertical_gradient(i) / 100.0
768	pt_vertical_gradient_level_ind(i) = k - 1
769	i = i + 1
770	IF ( i > 10 ) THEN
771	IF ( myid == 0 ) THEN
772	PRINT*, '+++ check_parameters: upper bound 10 of array', &
773	' "pt_vertical_gradient_level_ind" exceeded'
774	ENDIF
775	CALL local_stop
776	ENDIF
777	ENDIF
778	IF ( gradient /= 0.0 ) THEN
779	IF ( k /= 1 ) THEN
780	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
781	ELSE
782	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
783	ENDIF
784	ELSE
785	pt_init(k) = pt_init(k-1)
786	ENDIF
787	ENDDO
788
789	ELSE
790
791	pt_vertical_gradient_level_ind(1) = nzt+1
792	DO k = nzt, 0, -1
793	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
794	pt_vertical_gradient_level(i) <= 0.0 ) THEN
795	gradient = pt_vertical_gradient(i) / 100.0
796	pt_vertical_gradient_level_ind(i) = k + 1
797	i = i + 1
798	IF ( i > 10 ) THEN
799	IF ( myid == 0 ) THEN
800	PRINT*, '+++ check_parameters: upper bound 10 of array', &
801	' "pt_vertical_gradient_level_ind" exceeded'
802	ENDIF
803	CALL local_stop
804	ENDIF
805	ENDIF
806	IF ( gradient /= 0.0 ) THEN
807	IF ( k /= nzt ) THEN
808	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
809	ELSE
810	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
811	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
812	ENDIF
813	ELSE
814	pt_init(k) = pt_init(k+1)
815	ENDIF
816	ENDDO
817
818	ENDIF
819
820	!
821	!-- In case of no given temperature gradients, choose gradient of neutral
822	!-- stratification
823	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
824	pt_vertical_gradient_level(1) = 0.0
825	ENDIF
826
827	!
828	!-- Store temperature gradient at the top boundary for possible Neumann
829	!-- boundary condition
830	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
831
832	!
833	!-- If required, compute initial humidity or scalar profile using the given
834	!-- humidity/scalar gradient. In case of scalar transport, initially store
835	!-- values of the scalar parameters on humidity parameters
836	IF ( passive_scalar ) THEN
837	bc_q_b = bc_s_b
838	bc_q_t = bc_s_t
839	q_surface = s_surface
840	q_surface_initial_change = s_surface_initial_change
841	q_vertical_gradient = s_vertical_gradient
842	q_vertical_gradient_level = s_vertical_gradient_level
843	surface_waterflux = surface_scalarflux
844	ENDIF
845
846	IF ( humidity .OR. passive_scalar ) THEN
847
848	i = 1
849	gradient = 0.0
850	q_vertical_gradient_level_ind(1) = 0
851	DO k = 1, nzt+1
852	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
853	q_vertical_gradient_level(i) >= 0.0 ) THEN
854	gradient = q_vertical_gradient(i) / 100.0
855	q_vertical_gradient_level_ind(i) = k - 1
856	i = i + 1
857	IF ( i > 10 ) THEN
858	IF ( myid == 0 ) THEN
859	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
860	'ay "q_vertical_gradient_level_ind" exceeded'
861	ENDIF
862	CALL local_stop
863	ENDIF
864	ENDIF
865	IF ( gradient /= 0.0 ) THEN
866	IF ( k /= 1 ) THEN
867	q_init(k) = q_init(k-1) + dzu(k) * gradient
868	ELSE
869	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
870	ENDIF
871	ELSE
872	q_init(k) = q_init(k-1)
873	ENDIF
874	!
875	!-- Avoid negative humidities
876	IF ( q_init(k) < 0.0 ) THEN
877	q_init(k) = 0.0
878	ENDIF
879	ENDDO
880
881	!
882	!-- In case of no given humidity gradients, choose zero gradient
883	!-- conditions
884	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
885	q_vertical_gradient_level(1) = 0.0
886	ENDIF
887
888	!
889	!-- Store humidity gradient at the top boundary for possile Neumann
890	!-- boundary condition
891	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
892
893	ENDIF
894
895	!
896	!-- If required, compute initial salinity profile using the given salinity
897	!-- gradients
898	IF ( ocean ) THEN
899
900	i = 1
901	gradient = 0.0
902
903	sa_vertical_gradient_level_ind(1) = nzt+1
904	DO k = nzt, 0, -1
905	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
906	sa_vertical_gradient_level(i) <= 0.0 ) THEN
907	gradient = sa_vertical_gradient(i) / 100.0
908	sa_vertical_gradient_level_ind(i) = k + 1
909	i = i + 1
910	IF ( i > 10 ) THEN
911	IF ( myid == 0 ) THEN
912	PRINT*, '+++ check_parameters: upper bound 10 of array', &
913	' "sa_vertical_gradient_level_ind" exceeded'
914	ENDIF
915	CALL local_stop
916	ENDIF
917	ENDIF
918	IF ( gradient /= 0.0 ) THEN
919	IF ( k /= nzt ) THEN
920	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
921	ELSE
922	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
923	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
924	ENDIF
925	ELSE
926	sa_init(k) = sa_init(k+1)
927	ENDIF
928	ENDDO
929
930	ENDIF
931
932	ENDIF
933
934	!
935	!-- Compute Coriolis parameter
936	f = 2.0 * omega * SIN( phi / 180.0 * pi )
937	fs = 2.0 * omega * COS( phi / 180.0 * pi )
938
939	!
940	!-- Ocean runs always use reference values in the buoyancy term. Therefore
941	!-- set the reference temperature equal to the surface temperature.
942	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
943
944	!
945	!-- Reference value has to be used in buoyancy terms
946	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
947
948	!
949	!-- Sign of buoyancy/stability terms
950	IF ( ocean ) atmos_ocean_sign = -1.0
951
952	!
953	!-- Ocean version must use flux boundary conditions at the top
954	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
955	IF ( myid == 0 ) PRINT*, '+++ check_parameters: use_top_fluxes ',&
956	'must be .TRUE. in ocean version'
957	CALL local_stop
958	ENDIF
959
960	!
961	!-- In case of a given slope, compute the relevant quantities
962	IF ( alpha_surface /= 0.0 ) THEN
963	IF ( ABS( alpha_surface ) > 90.0 ) THEN
964	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
965	'=', alpha_surface, ' ) must be < 90.0'
966	CALL local_stop
967	ENDIF
968	sloping_surface = .TRUE.
969	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
970	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
971	ENDIF
972
973	!
974	!-- Check time step and cfl_factor
975	IF ( dt /= -1.0 ) THEN
976	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
977	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
978	CALL local_stop
979	ENDIF
980	dt_3d = dt
981	dt_fixed = .TRUE.
982	ENDIF
983
984	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
985	IF ( cfl_factor == -1.0 ) THEN
986	IF ( momentum_advec == 'ups-scheme' .OR. &
987	scalar_advec == 'ups-scheme' ) THEN
988	cfl_factor = 0.8
989	ELSE
990	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
991	cfl_factor = 0.8
992	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
993	cfl_factor = 0.9
994	ELSE
995	cfl_factor = 0.1
996	ENDIF
997	ENDIF
998	ELSE
999	IF ( myid == 0 ) THEN
1000	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
1001	' out of range'
1002	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
1003	ENDIF
1004	CALL local_stop
1005	ENDIF
1006	ENDIF
1007
1008	!
1009	!-- Store simulated time at begin
1010	simulated_time_at_begin = simulated_time
1011
1012	!
1013	!-- Set wind speed in the Galilei-transformed system
1014	IF ( galilei_transformation ) THEN
1015	IF ( use_ug_for_galilei_tr .AND. &
1016	ug_vertical_gradient_level(1) == 0.0 .AND. &
1017	vg_vertical_gradient_level(1) == 0.0 ) THEN
1018	u_gtrans = ug_surface
1019	v_gtrans = vg_surface
1020	ELSEIF ( use_ug_for_galilei_tr .AND. &
1021	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1022	IF ( myid == 0 ) THEN
1023	PRINT*, '+++ check_parameters:'
1024	PRINT*, ' baroclinicity (ug) not allowed'
1025	PRINT*, ' simultaneously with galilei transformation'
1026	ENDIF
1027	CALL local_stop
1028	ELSEIF ( use_ug_for_galilei_tr .AND. &
1029	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1030	IF ( myid == 0 ) THEN
1031	PRINT*, '+++ check_parameters:'
1032	PRINT*, ' baroclinicity (vg) not allowed'
1033	PRINT*, ' simultaneously with galilei transformation'
1034	ENDIF
1035	CALL local_stop
1036	ELSE
1037	IF ( myid == 0 ) THEN
1038	PRINT*, '+++ WARNING: check_parameters:'
1039	PRINT*, ' variable translation speed used for galilei-tran' // &
1040	'sformation, which'
1041	PRINT*, ' may cause instabilities in stably stratified regions'
1042	ENDIF
1043	ENDIF
1044	ENDIF
1045
1046	!
1047	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1048	!-- fluxes have to be used in the diffusion-terms
1049	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1050
1051	!
1052	!-- Check boundary conditions and set internal variables:
1053	!-- Lateral boundary conditions
1054	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1055	bc_lr /= 'radiation/dirichlet' ) THEN
1056	IF ( myid == 0 ) THEN
1057	PRINT*, '+++ check_parameters:'
1058	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
1059	ENDIF
1060	CALL local_stop
1061	ENDIF
1062	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1063	bc_ns /= 'radiation/dirichlet' ) THEN
1064	IF ( myid == 0 ) THEN
1065	PRINT*, '+++ check_parameters:'
1066	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
1067	ENDIF
1068	CALL local_stop
1069	ENDIF
1070
1071	!
1072	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1073	!-- Willimas advection scheme. Several schemes and tools do not work with
1074	!-- non-cyclic boundary conditions.
1075	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1076	IF ( psolver /= 'multigrid' ) THEN
1077	IF ( myid == 0 ) THEN
1078	PRINT*, '+++ check_parameters:'
1079	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1080	' psolver = ', psolver
1081	ENDIF
1082	CALL local_stop
1083	ENDIF
1084	IF ( momentum_advec /= 'pw-scheme' ) THEN
1085	IF ( myid == 0 ) THEN
1086	PRINT*, '+++ check_parameters:'
1087	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1088	' momentum_advec = ', momentum_advec
1089	ENDIF
1090	CALL local_stop
1091	ENDIF
1092	IF ( scalar_advec /= 'pw-scheme' ) THEN
1093	IF ( myid == 0 ) THEN
1094	PRINT*, '+++ check_parameters:'
1095	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1096	' scalar_advec = ', scalar_advec
1097	ENDIF
1098	CALL local_stop
1099	ENDIF
1100	IF ( galilei_transformation ) THEN
1101	IF ( myid == 0 ) THEN
1102	PRINT*, '+++ check_parameters:'
1103	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1104	' galilei_transformation = .T.'
1105	ENDIF
1106	CALL local_stop
1107	ENDIF
1108	! IF ( conserve_volume_flow ) THEN
1109	! IF ( myid == 0 ) THEN
1110	! PRINT*, '+++ check_parameters:'
1111	! PRINT*, ' non-cyclic lateral boundaries do not allow', &
1112	! ' conserve_volume_flow = .T.'
1113	! ENDIF
1114	! CALL local_stop
1115	! ENDIF
1116	ENDIF
1117
1118	!
1119	!-- Bottom boundary condition for the turbulent Kinetic energy
1120	IF ( bc_e_b == 'neumann' ) THEN
1121	ibc_e_b = 1
1122	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1123	IF ( myid == 0 ) THEN
1124	PRINT*, '+++ WARNING: check_parameters:'
1125	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
1126	ENDIF
1127	ENDIF
1128	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1129	ibc_e_b = 2
1130	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1131	IF ( myid == 0 ) THEN
1132	PRINT*, '+++ WARNING: check_parameters:'
1133	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
1134	ENDIF
1135	ENDIF
1136	IF ( .NOT. prandtl_layer ) THEN
1137	bc_e_b = 'neumann'
1138	ibc_e_b = 1
1139	IF ( myid == 0 ) THEN
1140	PRINT*, '+++ WARNING: check_parameters:'
1141	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
1142	ENDIF
1143	ENDIF
1144	ELSE
1145	IF ( myid == 0 ) THEN
1146	PRINT*, '+++ check_parameters:'
1147	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
1148	ENDIF
1149	CALL local_stop
1150	ENDIF
1151
1152	!
1153	!-- Boundary conditions for perturbation pressure
1154	IF ( bc_p_b == 'dirichlet' ) THEN
1155	ibc_p_b = 0
1156	ELSEIF ( bc_p_b == 'neumann' ) THEN
1157	ibc_p_b = 1
1158	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1159	ibc_p_b = 2
1160	ELSE
1161	IF ( myid == 0 ) THEN
1162	PRINT*, '+++ check_parameters:'
1163	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
1164	ENDIF
1165	CALL local_stop
1166	ENDIF
1167	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1168	IF ( myid == 0 ) THEN
1169	PRINT*, '+++ check_parameters:'
1170	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
1171	' not allowed with'
1172	PRINT*, ' prandtl_layer = .FALSE.'
1173	ENDIF
1174	CALL local_stop
1175	ENDIF
1176	IF ( bc_p_t == 'dirichlet' ) THEN
1177	ibc_p_t = 0
1178	ELSEIF ( bc_p_t == 'neumann' ) THEN
1179	ibc_p_t = 1
1180	ELSE
1181	IF ( myid == 0 ) THEN
1182	PRINT*, '+++ check_parameters:'
1183	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
1184	ENDIF
1185	CALL local_stop
1186	ENDIF
1187
1188	!
1189	!-- Boundary conditions for potential temperature
1190	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1191	ibc_pt_b = 2
1192	ELSE
1193	IF ( bc_pt_b == 'dirichlet' ) THEN
1194	ibc_pt_b = 0
1195	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1196	ibc_pt_b = 1
1197	ELSE
1198	IF ( myid == 0 ) THEN
1199	PRINT*, '+++ check_parameters:'
1200	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
1201	ENDIF
1202	CALL local_stop
1203	ENDIF
1204	ENDIF
1205
1206	IF ( bc_pt_t == 'dirichlet' ) THEN
1207	ibc_pt_t = 0
1208	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1209	ibc_pt_t = 1
1210	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1211	ibc_pt_t = 2
1212	ELSE
1213	IF ( myid == 0 ) THEN
1214	PRINT*, '+++ check_parameters:'
1215	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
1216	ENDIF
1217	CALL local_stop
1218	ENDIF
1219
1220	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1221	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1222	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1223	top_momentumflux_v /= 9999999.9 ) THEN
1224	constant_top_momentumflux = .TRUE.
1225	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1226	top_momentumflux_v == 9999999.9 ) ) THEN
1227	IF ( myid == 0 ) THEN
1228	PRINT*, '+++ check_parameters:'
1229	PRINT*, ' both, top_momentumflux_u AND top_momentumflux_v'
1230	PRINT*, ' must be set'
1231	ENDIF
1232	CALL local_stop
1233	ENDIF
1234
1235	!
1236	!-- A given surface temperature implies Dirichlet boundary condition for
1237	!-- temperature. In this case specification of a constant heat flux is
1238	!-- forbidden.
1239	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1240	surface_heatflux /= 0.0 ) THEN
1241	IF ( myid == 0 ) THEN
1242	PRINT*, '+++ check_parameters:'
1243	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
1244	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
1245	ENDIF
1246	CALL local_stop
1247	ENDIF
1248	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1249	IF ( myid == 0 ) THEN
1250	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
1251	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
1252	pt_surface_initial_change
1253	ENDIF
1254	CALL local_stop
1255	ENDIF
1256
1257	!
1258	!-- A given temperature at the top implies Dirichlet boundary condition for
1259	!-- temperature. In this case specification of a constant heat flux is
1260	!-- forbidden.
1261	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1262	top_heatflux /= 0.0 ) THEN
1263	IF ( myid == 0 ) THEN
1264	PRINT*, '+++ check_parameters:'
1265	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
1266	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
1267	ENDIF
1268	CALL local_stop
1269	ENDIF
1270
1271	!
1272	!-- Boundary conditions for salinity
1273	IF ( ocean ) THEN
1274	IF ( bc_sa_t == 'dirichlet' ) THEN
1275	ibc_sa_t = 0
1276	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1277	ibc_sa_t = 1
1278	ELSE
1279	IF ( myid == 0 ) THEN
1280	PRINT*, '+++ check_parameters:'
1281	PRINT*, ' unknown boundary condition: bc_sa_t = ', bc_sa_t
1282	ENDIF
1283	CALL local_stop
1284	ENDIF
1285
1286	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1287	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1288	IF ( myid == 0 ) THEN
1289	PRINT*, '+++ check_parameters:'
1290	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1291	PRINT*, ' requires to set top_salinityflux '
1292	ENDIF
1293	CALL local_stop
1294	ENDIF
1295
1296	!
1297	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1298	!-- salinity. In this case specification of a constant salinity flux is
1299	!-- forbidden.
1300	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1301	top_salinityflux /= 0.0 ) THEN
1302	IF ( myid == 0 ) THEN
1303	PRINT*, '+++ check_parameters:'
1304	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1305	PRINT*, ' is not allowed with constant_top_salinityflux = ', &
1306	'.TRUE.'
1307	ENDIF
1308	CALL local_stop
1309	ENDIF
1310
1311	ENDIF
1312
1313	!
1314	!-- In case of humidity or passive scalar, set boundary conditions for total
1315	!-- water content / scalar
1316	IF ( humidity .OR. passive_scalar ) THEN
1317	IF ( humidity ) THEN
1318	sq = 'q'
1319	ELSE
1320	sq = 's'
1321	ENDIF
1322	IF ( bc_q_b == 'dirichlet' ) THEN
1323	ibc_q_b = 0
1324	ELSEIF ( bc_q_b == 'neumann' ) THEN
1325	ibc_q_b = 1
1326	ELSE
1327	IF ( myid == 0 ) THEN
1328	PRINT*, '+++ check_parameters:'
1329	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
1330	ENDIF
1331	CALL local_stop
1332	ENDIF
1333	IF ( bc_q_t == 'dirichlet' ) THEN
1334	ibc_q_t = 0
1335	ELSEIF ( bc_q_t == 'neumann' ) THEN
1336	ibc_q_t = 1
1337	ELSE
1338	IF ( myid == 0 ) THEN
1339	PRINT*, '+++ check_parameters:'
1340	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
1341	ENDIF
1342	CALL local_stop
1343	ENDIF
1344
1345	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1346
1347	!
1348	!-- A given surface humidity implies Dirichlet boundary condition for
1349	!-- humidity. In this case specification of a constant water flux is
1350	!-- forbidden.
1351	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1352	IF ( myid == 0 ) THEN
1353	PRINT*, '+++ check_parameters:'
1354	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
1355	PRINT*, ' is not allowed with prescribed surface flux'
1356	ENDIF
1357	CALL local_stop
1358	ENDIF
1359	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1360	IF ( myid == 0 ) THEN
1361	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
1362	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
1363	' = ', q_surface_initial_change
1364	ENDIF
1365	CALL local_stop
1366	ENDIF
1367
1368	ENDIF
1369
1370	!
1371	!-- Boundary conditions for horizontal components of wind speed
1372	IF ( bc_uv_b == 'dirichlet' ) THEN
1373	ibc_uv_b = 0
1374	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1375	ibc_uv_b = 1
1376	IF ( prandtl_layer ) THEN
1377	IF ( myid == 0 ) THEN
1378	PRINT*, '+++ check_parameters:'
1379	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
1380	' is not allowed with'
1381	PRINT*, ' prandtl_layer = .TRUE.'
1382	ENDIF
1383	CALL local_stop
1384	ENDIF
1385	ELSE
1386	IF ( myid == 0 ) THEN
1387	PRINT*, '+++ check_parameters:'
1388	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
1389	ENDIF
1390	CALL local_stop
1391	ENDIF
1392	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1393	bc_uv_t = 'neumann'
1394	ibc_uv_t = 1
1395	ELSE
1396	IF ( bc_uv_t == 'dirichlet' ) THEN
1397	ibc_uv_t = 0
1398	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1399	ibc_uv_t = 1
1400	ELSE
1401	IF ( myid == 0 ) THEN
1402	PRINT*, '+++ check_parameters:'
1403	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
1404	ENDIF
1405	CALL local_stop
1406	ENDIF
1407	ENDIF
1408
1409	!
1410	!-- Compute and check, respectively, the Rayleigh Damping parameter
1411	IF ( rayleigh_damping_factor == -1.0 ) THEN
1412	IF ( momentum_advec == 'ups-scheme' ) THEN
1413	rayleigh_damping_factor = 0.01
1414	ELSE
1415	rayleigh_damping_factor = 0.0
1416	ENDIF
1417	ELSE
1418	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1419	THEN
1420	IF ( myid == 0 ) THEN
1421	PRINT*, '+++ check_parameters:'
1422	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
1423	' out of range [0.0,1.0]'
1424	ENDIF
1425	CALL local_stop
1426	ENDIF
1427	ENDIF
1428
1429	IF ( rayleigh_damping_height == -1.0 ) THEN
1430	IF ( .NOT. ocean ) THEN
1431	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1432	ELSE
1433	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1434	ENDIF
1435	ELSE
1436	IF ( .NOT. ocean ) THEN
1437	IF ( rayleigh_damping_height < 0.0 .OR. &
1438	rayleigh_damping_height > zu(nzt) ) THEN
1439	IF ( myid == 0 ) THEN
1440	PRINT*, '+++ check_parameters:'
1441	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1442	' out of range [0.0,', zu(nzt), ']'
1443	ENDIF
1444	CALL local_stop
1445	ENDIF
1446	ELSE
1447	IF ( rayleigh_damping_height > 0.0 .OR. &
1448	rayleigh_damping_height < zu(nzb) ) THEN
1449	IF ( myid == 0 ) THEN
1450	PRINT*, '+++ check_parameters:'
1451	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1452	' out of range [0.0,', zu(nzb), ']'
1453	ENDIF
1454	CALL local_stop
1455	ENDIF
1456	ENDIF
1457	ENDIF
1458
1459	!
1460	!-- Check limiters for Upstream-Spline scheme
1461	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1462	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1463	overshoot_limit_e < 0.0 ) THEN
1464	IF ( myid == 0 ) THEN
1465	PRINT*, '+++ check_parameters:'
1466	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
1467	ENDIF
1468	CALL local_stop
1469	ENDIF
1470	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1471	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1472	IF ( myid == 0 ) THEN
1473	PRINT*, '+++ check_parameters:'
1474	PRINT*, ' ups_limit_... < 0.0 is not allowed'
1475	ENDIF
1476	CALL local_stop
1477	ENDIF
1478
1479	!
1480	!-- Check number of chosen statistic regions. More than 10 regions are not
1481	!-- allowed, because so far no more than 10 corresponding output files can
1482	!-- be opened (cf. check_open)
1483	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1484	IF ( myid == 0 ) THEN
1485	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
1486	statistic_regions+1
1487	PRINT*, ' Only 10 regions are allowed'
1488	ENDIF
1489	CALL local_stop
1490	ENDIF
1491	IF ( normalizing_region > statistic_regions .OR. &
1492	normalizing_region < 0) THEN
1493	IF ( myid == 0 ) THEN
1494	PRINT*, '+++ check_parameters: normalizing_region = ', &
1495	normalizing_region, ' is unknown'
1496	PRINT*, ' Must be <= ', statistic_regions
1497	ENDIF
1498	CALL local_stop
1499	ENDIF
1500
1501	!
1502	!-- Set the default intervals for data output, if necessary
1503	!-- NOTE: dt_dosp has already been set in package_parin
1504	IF ( dt_data_output /= 9999999.9 ) THEN
1505	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1506	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1507	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1508	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1509	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1510	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1511	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1512	ENDIF
1513
1514	!
1515	!-- Set the default skip time intervals for data output, if necessary
1516	IF ( skip_time_dopr == 9999999.9 ) &
1517	skip_time_dopr = skip_time_data_output
1518	IF ( skip_time_dosp == 9999999.9 ) &
1519	skip_time_dosp = skip_time_data_output
1520	IF ( skip_time_do2d_xy == 9999999.9 ) &
1521	skip_time_do2d_xy = skip_time_data_output
1522	IF ( skip_time_do2d_xz == 9999999.9 ) &
1523	skip_time_do2d_xz = skip_time_data_output
1524	IF ( skip_time_do2d_yz == 9999999.9 ) &
1525	skip_time_do2d_yz = skip_time_data_output
1526	IF ( skip_time_do3d == 9999999.9 ) &
1527	skip_time_do3d = skip_time_data_output
1528	IF ( skip_time_data_output_av == 9999999.9 ) &
1529	skip_time_data_output_av = skip_time_data_output
1530
1531	!
1532	!-- Check the average intervals (first for 3d-data, then for profiles and
1533	!-- spectra)
1534	IF ( averaging_interval > dt_data_output_av ) THEN
1535	IF ( myid == 0 ) THEN
1536	PRINT*, '+++ check_parameters: average_interval=', &
1537	averaging_interval, ' must be <= dt_data_output=', &
1538	dt_data_output
1539	ENDIF
1540	CALL local_stop
1541	ENDIF
1542
1543	IF ( averaging_interval_pr == 9999999.9 ) THEN
1544	averaging_interval_pr = averaging_interval
1545	ENDIF
1546
1547	IF ( averaging_interval_pr > dt_dopr ) THEN
1548	IF ( myid == 0 ) THEN
1549	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1550	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1551	ENDIF
1552	CALL local_stop
1553	ENDIF
1554
1555	IF ( averaging_interval_sp == 9999999.9 ) THEN
1556	averaging_interval_sp = averaging_interval
1557	ENDIF
1558
1559	IF ( averaging_interval_sp > dt_dosp ) THEN
1560	IF ( myid == 0 ) THEN
1561	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1562	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1563	ENDIF
1564	CALL local_stop
1565	ENDIF
1566
1567	!
1568	!-- Set the default interval for profiles entering the temporal average
1569	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1570	dt_averaging_input_pr = dt_averaging_input
1571	ENDIF
1572
1573	!
1574	!-- Set the default interval for the output of timeseries to a reasonable
1575	!-- value (tries to minimize the number of calls of flow_statistics)
1576	IF ( dt_dots == 9999999.9 ) THEN
1577	IF ( averaging_interval_pr == 0.0 ) THEN
1578	dt_dots = MIN( dt_run_control, dt_dopr )
1579	ELSE
1580	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1581	ENDIF
1582	ENDIF
1583
1584	!
1585	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1586	IF ( dt_averaging_input > averaging_interval ) THEN
1587	IF ( myid == 0 ) THEN
1588	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1589	dt_averaging_input, ' must be <= averaging_interval=', &
1590	averaging_interval
1591	ENDIF
1592	CALL local_stop
1593	ENDIF
1594
1595	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1596	IF ( myid == 0 ) THEN
1597	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1598	dt_averaging_input_pr, &
1599	' must be <= averaging_interval_pr=', &
1600	averaging_interval_pr
1601	ENDIF
1602	CALL local_stop
1603	ENDIF
1604
1605	!
1606	!-- Set the default value for the integration interval of precipitation amount
1607	IF ( precipitation ) THEN
1608	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1609	precipitation_amount_interval = dt_do2d_xy
1610	ELSE
1611	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1612	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
1613	'precipitation_amount_interval =', &
1614	precipitation_amount_interval, &
1615	' must not be larger than dt_do2d_xy', &
1616	' = ', dt_do2d_xy
1617	CALL local_stop
1618	ENDIF
1619	ENDIF
1620	ENDIF
1621
1622	!
1623	!-- Determine the number of output profiles and check whether they are
1624	!-- permissible
1625	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1626
1627	dopr_n = dopr_n + 1
1628	i = dopr_n
1629
1630	!
1631	!-- Determine internal profile number (for hom, homs)
1632	!-- and store height levels
1633	SELECT CASE ( TRIM( data_output_pr(i) ) )
1634
1635	CASE ( 'u', '#u' )
1636	dopr_index(i) = 1
1637	dopr_unit(i) = 'm/s'
1638	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1639	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1640	dopr_initial_index(i) = 5
1641	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1642	data_output_pr(i) = data_output_pr(i)(2:)
1643	ENDIF
1644
1645	CASE ( 'v', '#v' )
1646	dopr_index(i) = 2
1647	dopr_unit(i) = 'm/s'
1648	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1649	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1650	dopr_initial_index(i) = 6
1651	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1652	data_output_pr(i) = data_output_pr(i)(2:)
1653	ENDIF
1654
1655	CASE ( 'w' )
1656	dopr_index(i) = 3
1657	dopr_unit(i) = 'm/s'
1658	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1659
1660	CASE ( 'pt', '#pt' )
1661	IF ( .NOT. cloud_physics ) THEN
1662	dopr_index(i) = 4
1663	dopr_unit(i) = 'K'
1664	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1665	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1666	dopr_initial_index(i) = 7
1667	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1668	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1669	data_output_pr(i) = data_output_pr(i)(2:)
1670	ENDIF
1671	ELSE
1672	dopr_index(i) = 43
1673	dopr_unit(i) = 'K'
1674	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1675	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1676	dopr_initial_index(i) = 28
1677	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1678	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1679	data_output_pr(i) = data_output_pr(i)(2:)
1680	ENDIF
1681	ENDIF
1682
1683	CASE ( 'e' )
1684	dopr_index(i) = 8
1685	dopr_unit(i) = 'm2/s2'
1686	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1687	hom(nzb,2,8,:) = 0.0
1688
1689	CASE ( 'km', '#km' )
1690	dopr_index(i) = 9
1691	dopr_unit(i) = 'm2/s'
1692	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1693	hom(nzb,2,9,:) = 0.0
1694	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1695	dopr_initial_index(i) = 23
1696	hom(:,2,23,:) = hom(:,2,9,:)
1697	data_output_pr(i) = data_output_pr(i)(2:)
1698	ENDIF
1699
1700	CASE ( 'kh', '#kh' )
1701	dopr_index(i) = 10
1702	dopr_unit(i) = 'm2/s'
1703	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1704	hom(nzb,2,10,:) = 0.0
1705	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1706	dopr_initial_index(i) = 24
1707	hom(:,2,24,:) = hom(:,2,10,:)
1708	data_output_pr(i) = data_output_pr(i)(2:)
1709	ENDIF
1710
1711	CASE ( 'l', '#l' )
1712	dopr_index(i) = 11
1713	dopr_unit(i) = 'm'
1714	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1715	hom(nzb,2,11,:) = 0.0
1716	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1717	dopr_initial_index(i) = 25
1718	hom(:,2,25,:) = hom(:,2,11,:)
1719	data_output_pr(i) = data_output_pr(i)(2:)
1720	ENDIF
1721
1722	CASE ( 'w"u"' )
1723	dopr_index(i) = 12
1724	dopr_unit(i) = 'm2/s2'
1725	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1726	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1727
1728	CASE ( 'wu' )
1729	dopr_index(i) = 13
1730	dopr_unit(i) = 'm2/s2'
1731	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1732
1733	CASE ( 'w"v"' )
1734	dopr_index(i) = 14
1735	dopr_unit(i) = 'm2/s2'
1736	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1737	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1738
1739	CASE ( 'wv' )
1740	dopr_index(i) = 15
1741	dopr_unit(i) = 'm2/s2'
1742	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1743
1744	CASE ( 'w"pt"' )
1745	dopr_index(i) = 16
1746	dopr_unit(i) = 'K m/s'
1747	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1748
1749	CASE ( 'wpt' )
1750	dopr_index(i) = 17
1751	dopr_unit(i) = 'K m/s'
1752	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1753
1754	CASE ( 'wpt' )
1755	dopr_index(i) = 18
1756	dopr_unit(i) = 'K m/s'
1757	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1758
1759	CASE ( 'wu' )
1760	dopr_index(i) = 19
1761	dopr_unit(i) = 'm2/s2'
1762	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1763	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1764
1765	CASE ( 'wv' )
1766	dopr_index(i) = 20
1767	dopr_unit(i) = 'm2/s2'
1768	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1769	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1770
1771	CASE ( 'wptBC' )
1772	dopr_index(i) = 21
1773	dopr_unit(i) = 'K m/s'
1774	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1775
1776	CASE ( 'wptBC' )
1777	dopr_index(i) = 22
1778	dopr_unit(i) = 'K m/s'
1779	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1780
1781	CASE ( 'sa', '#sa' )
1782	IF ( .NOT. ocean ) THEN
1783	IF ( myid == 0 ) THEN
1784	PRINT*, '+++ check_parameters: data_output_pr = ', &
1785	data_output_pr(i), &
1786	' is not implemented for ocean = FALSE'
1787	ENDIF
1788	CALL local_stop
1789	ELSE
1790	dopr_index(i) = 23
1791	dopr_unit(i) = 'psu'
1792	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1793	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1794	dopr_initial_index(i) = 26
1795	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1796	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1797	data_output_pr(i) = data_output_pr(i)(2:)
1798	ENDIF
1799	ENDIF
1800
1801	CASE ( 'u*2' )
1802	dopr_index(i) = 30
1803	dopr_unit(i) = 'm2/s2'
1804	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1805
1806	CASE ( 'v*2' )
1807	dopr_index(i) = 31
1808	dopr_unit(i) = 'm2/s2'
1809	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1810
1811	CASE ( 'w*2' )
1812	dopr_index(i) = 32
1813	dopr_unit(i) = 'm2/s2'
1814	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1815
1816	CASE ( 'pt*2' )
1817	dopr_index(i) = 33
1818	dopr_unit(i) = 'K2'
1819	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1820
1821	CASE ( 'e*' )
1822	dopr_index(i) = 34
1823	dopr_unit(i) = 'm2/s2'
1824	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1825
1826	CASE ( 'w2pt' )
1827	dopr_index(i) = 35
1828	dopr_unit(i) = 'K m2/s2'
1829	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1830
1831	CASE ( 'wpt2' )
1832	dopr_index(i) = 36
1833	dopr_unit(i) = 'K2 m/s'
1834	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1835
1836	CASE ( 'we' )
1837	dopr_index(i) = 37
1838	dopr_unit(i) = 'm3/s3'
1839	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1840
1841	CASE ( 'w*3' )
1842	dopr_index(i) = 38
1843	dopr_unit(i) = 'm3/s3'
1844	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1845
1846	CASE ( 'Sw' )
1847	dopr_index(i) = 39
1848	dopr_unit(i) = 'none'
1849	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1850
1851	CASE ( 'q', '#q' )
1852	IF ( .NOT. humidity ) THEN
1853	IF ( myid == 0 ) THEN
1854	PRINT*, '+++ check_parameters: data_output_pr = ', &
1855	data_output_pr(i), &
1856	' is not implemented for humidity = FALSE'
1857	ENDIF
1858	CALL local_stop
1859	ELSE
1860	dopr_index(i) = 41
1861	dopr_unit(i) = 'kg/kg'
1862	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1863	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1864	dopr_initial_index(i) = 26
1865	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1866	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1867	data_output_pr(i) = data_output_pr(i)(2:)
1868	ENDIF
1869	ENDIF
1870
1871	CASE ( 's', '#s' )
1872	IF ( .NOT. passive_scalar ) THEN
1873	IF ( myid == 0 ) THEN
1874	PRINT*, '+++ check_parameters: data_output_pr = ', &
1875	data_output_pr(i), &
1876	' is not implemented for passive_scalar = FALSE'
1877	ENDIF
1878	CALL local_stop
1879	ELSE
1880	dopr_index(i) = 41
1881	dopr_unit(i) = 'kg/m3'
1882	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1883	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1884	dopr_initial_index(i) = 26
1885	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1886	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1887	data_output_pr(i) = data_output_pr(i)(2:)
1888	ENDIF
1889	ENDIF
1890
1891	CASE ( 'qv', '#qv' )
1892	IF ( .NOT. cloud_physics ) THEN
1893	dopr_index(i) = 41
1894	dopr_unit(i) = 'kg/kg'
1895	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1896	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1897	dopr_initial_index(i) = 26
1898	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1899	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1900	data_output_pr(i) = data_output_pr(i)(2:)
1901	ENDIF
1902	ELSE
1903	dopr_index(i) = 42
1904	dopr_unit(i) = 'kg/kg'
1905	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1906	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1907	dopr_initial_index(i) = 27
1908	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1909	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1910	data_output_pr(i) = data_output_pr(i)(2:)
1911	ENDIF
1912	ENDIF
1913
1914	CASE ( 'lpt', '#lpt' )
1915	IF ( .NOT. cloud_physics ) THEN
1916	IF ( myid == 0 ) THEN
1917	PRINT*, '+++ check_parameters: data_output_pr = ', &
1918	data_output_pr(i), &
1919	' is not implemented for cloud_physics = FALSE'
1920	ENDIF
1921	CALL local_stop
1922	ELSE
1923	dopr_index(i) = 4
1924	dopr_unit(i) = 'K'
1925	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1926	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1927	dopr_initial_index(i) = 7
1928	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1929	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1930	data_output_pr(i) = data_output_pr(i)(2:)
1931	ENDIF
1932	ENDIF
1933
1934	CASE ( 'vpt', '#vpt' )
1935	dopr_index(i) = 44
1936	dopr_unit(i) = 'K'
1937	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1938	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1939	dopr_initial_index(i) = 29
1940	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1941	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1942	data_output_pr(i) = data_output_pr(i)(2:)
1943	ENDIF
1944
1945	CASE ( 'w"vpt"' )
1946	dopr_index(i) = 45
1947	dopr_unit(i) = 'K m/s'
1948	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1949
1950	CASE ( 'wvpt' )
1951	dopr_index(i) = 46
1952	dopr_unit(i) = 'K m/s'
1953	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1954
1955	CASE ( 'wvpt' )
1956	dopr_index(i) = 47
1957	dopr_unit(i) = 'K m/s'
1958	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1959
1960	CASE ( 'w"q"' )
1961	IF ( .NOT. humidity ) THEN
1962	IF ( myid == 0 ) THEN
1963	PRINT*, '+++ check_parameters: data_output_pr = ', &
1964	data_output_pr(i), &
1965	' is not implemented for humidity = FALSE'
1966	ENDIF
1967	CALL local_stop
1968	ELSE
1969	dopr_index(i) = 48
1970	dopr_unit(i) = 'kg/kg m/s'
1971	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1972	ENDIF
1973
1974	CASE ( 'wq' )
1975	IF ( .NOT. humidity ) THEN
1976	IF ( myid == 0 ) THEN
1977	PRINT*, '+++ check_parameters: data_output_pr = ', &
1978	data_output_pr(i), &
1979	' is not implemented for humidity = FALSE'
1980	ENDIF
1981	CALL local_stop
1982	ELSE
1983	dopr_index(i) = 49
1984	dopr_unit(i) = 'kg/kg m/s'
1985	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1986	ENDIF
1987
1988	CASE ( 'wq' )
1989	IF ( .NOT. humidity ) THEN
1990	IF ( myid == 0 ) THEN
1991	PRINT*, '+++ check_parameters: data_output_pr = ', &
1992	data_output_pr(i), &
1993	' is not implemented for humidity = FALSE'
1994	ENDIF
1995	CALL local_stop
1996	ELSE
1997	dopr_index(i) = 50
1998	dopr_unit(i) = 'kg/kg m/s'
1999	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2000	ENDIF
2001
2002	CASE ( 'w"s"' )
2003	IF ( .NOT. passive_scalar ) THEN
2004	IF ( myid == 0 ) THEN
2005	PRINT*, '+++ check_parameters: data_output_pr = ', &
2006	data_output_pr(i), &
2007	' is not implemented for passive_scalar = FALSE'
2008	ENDIF
2009	CALL local_stop
2010	ELSE
2011	dopr_index(i) = 48
2012	dopr_unit(i) = 'kg/m3 m/s'
2013	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2014	ENDIF
2015
2016	CASE ( 'ws' )
2017	IF ( .NOT. passive_scalar ) THEN
2018	IF ( myid == 0 ) THEN
2019	PRINT*, '+++ check_parameters: data_output_pr = ', &
2020	data_output_pr(i), &
2021	' is not implemented for passive_scalar = FALSE'
2022	ENDIF
2023	CALL local_stop
2024	ELSE
2025	dopr_index(i) = 49
2026	dopr_unit(i) = 'kg/m3 m/s'
2027	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2028	ENDIF
2029
2030	CASE ( 'ws' )
2031	IF ( .NOT. passive_scalar ) THEN
2032	IF ( myid == 0 ) THEN
2033	PRINT*, '+++ check_parameters: data_output_pr = ', &
2034	data_output_pr(i), &
2035	' is not implemented for passive_scalar = FALSE'
2036	ENDIF
2037	CALL local_stop
2038	ELSE
2039	dopr_index(i) = 50
2040	dopr_unit(i) = 'kg/m3 m/s'
2041	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2042	ENDIF
2043
2044	CASE ( 'w"qv"' )
2045	IF ( humidity .AND. .NOT. cloud_physics ) &
2046	THEN
2047	dopr_index(i) = 48
2048	dopr_unit(i) = 'kg/kg m/s'
2049	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2050	ELSEIF( humidity .AND. cloud_physics ) THEN
2051	dopr_index(i) = 51
2052	dopr_unit(i) = 'kg/kg m/s'
2053	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2054	ELSE
2055	IF ( myid == 0 ) THEN
2056	PRINT*, '+++ check_parameters: data_output_pr = ', &
2057	data_output_pr(i), &
2058	' is not implemented for cloud_physics = FALSE', &
2059	' and humidity = FALSE'
2060	ENDIF
2061	CALL local_stop
2062	ENDIF
2063
2064	CASE ( 'wqv' )
2065	IF ( humidity .AND. .NOT. cloud_physics ) &
2066	THEN
2067	dopr_index(i) = 49
2068	dopr_unit(i) = 'kg/kg m/s'
2069	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2070	ELSEIF( humidity .AND. cloud_physics ) THEN
2071	dopr_index(i) = 52
2072	dopr_unit(i) = 'kg/kg m/s'
2073	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2074	ELSE
2075	IF ( myid == 0 ) THEN
2076	PRINT*, '+++ check_parameters: data_output_pr = ', &
2077	data_output_pr(i), &
2078	' is not implemented for cloud_physics = FALSE', &
2079	' and humidity = FALSE'
2080	ENDIF
2081	CALL local_stop
2082	ENDIF
2083
2084	CASE ( 'wqv' )
2085	IF ( humidity .AND. .NOT. cloud_physics ) &
2086	THEN
2087	dopr_index(i) = 50
2088	dopr_unit(i) = 'kg/kg m/s'
2089	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2090	ELSEIF( humidity .AND. cloud_physics ) THEN
2091	dopr_index(i) = 53
2092	dopr_unit(i) = 'kg/kg m/s'
2093	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2094	ELSE
2095	IF ( myid == 0 ) THEN
2096	PRINT*, '+++ check_parameters: data_output_pr = ', &
2097	data_output_pr(i), &
2098	' is not implemented for cloud_physics = FALSE', &
2099	' and humidity = FALSE'
2100	ENDIF
2101	CALL local_stop
2102	ENDIF
2103
2104	CASE ( 'ql' )
2105	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2106	IF ( myid == 0 ) THEN
2107	PRINT*, '+++ check_parameters: data_output_pr = ', &
2108	data_output_pr(i), &
2109	' is not implemented for cloud_physics = FALSE'
2110	ENDIF
2111	CALL local_stop
2112	ELSE
2113	dopr_index(i) = 54
2114	dopr_unit(i) = 'kg/kg'
2115	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2116	ENDIF
2117
2118	CASE ( 'wuu*/dz' )
2119	dopr_index(i) = 55
2120	dopr_unit(i) = 'm2/s3'
2121	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2122
2123	CASE ( 'wp/dz' )
2124	dopr_index(i) = 56
2125	dopr_unit(i) = 'm2/s3'
2126	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2127
2128	CASE ( 'w"e/dz' )
2129	dopr_index(i) = 57
2130	dopr_unit(i) = 'm2/s3'
2131	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2132
2133	CASE ( 'u"pt"' )
2134	dopr_index(i) = 58
2135	dopr_unit(i) = 'K m/s'
2136	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2137
2138	CASE ( 'upt' )
2139	dopr_index(i) = 59
2140	dopr_unit(i) = 'K m/s'
2141	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2142
2143	CASE ( 'upt_t' )
2144	dopr_index(i) = 60
2145	dopr_unit(i) = 'K m/s'
2146	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2147
2148	CASE ( 'v"pt"' )
2149	dopr_index(i) = 61
2150	dopr_unit(i) = 'K m/s'
2151	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2152
2153	CASE ( 'vpt' )
2154	dopr_index(i) = 62
2155	dopr_unit(i) = 'K m/s'
2156	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2157
2158	CASE ( 'vpt_t' )
2159	dopr_index(i) = 63
2160	dopr_unit(i) = 'K m/s'
2161	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2162
2163	CASE ( 'rho' )
2164	dopr_index(i) = 64
2165	dopr_unit(i) = 'kg/m3'
2166	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2167
2168	CASE ( 'w"sa"' )
2169	IF ( .NOT. ocean ) THEN
2170	IF ( myid == 0 ) THEN
2171	PRINT*, '+++ check_parameters: data_output_pr = ', &
2172	data_output_pr(i), &
2173	' is not implemented for ocean = FALSE'
2174	ENDIF
2175	CALL local_stop
2176	ELSE
2177	dopr_index(i) = 65
2178	dopr_unit(i) = 'psu m/s'
2179	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2180	ENDIF
2181
2182	CASE ( 'wsa' )
2183	IF ( .NOT. ocean ) THEN
2184	IF ( myid == 0 ) THEN
2185	PRINT*, '+++ check_parameters: data_output_pr = ', &
2186	data_output_pr(i), &
2187	' is not implemented for ocean = FALSE'
2188	ENDIF
2189	CALL local_stop
2190	ELSE
2191	dopr_index(i) = 66
2192	dopr_unit(i) = 'psu m/s'
2193	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2194	ENDIF
2195
2196	CASE ( 'wsa' )
2197	IF ( .NOT. ocean ) THEN
2198	IF ( myid == 0 ) THEN
2199	PRINT*, '+++ check_parameters: data_output_pr = ', &
2200	data_output_pr(i), &
2201	' is not implemented for ocean = FALSE'
2202	ENDIF
2203	CALL local_stop
2204	ELSE
2205	dopr_index(i) = 67
2206	dopr_unit(i) = 'psu m/s'
2207	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2208	ENDIF
2209
2210	CASE ( 'wp' )
2211	dopr_index(i) = 68
2212	dopr_unit(i) = 'm3/s3'
2213	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2214
2215	CASE ( 'w"e' )
2216	dopr_index(i) = 69
2217	dopr_unit(i) = 'm3/s3'
2218	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2219
2220
2221	CASE DEFAULT
2222
2223	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2224
2225	IF ( unit == 'illegal' ) THEN
2226	IF ( myid == 0 ) THEN
2227	IF ( data_output_pr_user(1) /= ' ' ) THEN
2228	PRINT*, '+++ check_parameters: illegal value for data_',&
2229	'output_pr or data_output_pr_user: "', &
2230	TRIM( data_output_pr(i) ), '"'
2231	ELSE
2232	PRINT*, '+++ check_parameters: illegal value for data_',&
2233	'output_pr: "', TRIM( data_output_pr(i) ),'"'
2234	ENDIF
2235	ENDIF
2236	CALL local_stop
2237	ENDIF
2238
2239	END SELECT
2240	!
2241	!-- Check to which of the predefined coordinate systems the profile belongs
2242	DO k = 1, crmax
2243	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2244	/=0 ) &
2245	THEN
2246	dopr_crossindex(i) = k
2247	EXIT
2248	ENDIF
2249	ENDDO
2250	!
2251	!-- Generate the text for the labels of the PROFIL output file. "-characters
2252	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2253	!-- control characters
2254	dopr_label(i) = data_output_pr(i)
2255	position = INDEX( dopr_label(i) , '"' )
2256	DO WHILE ( position /= 0 )
2257	dopr_label(i)(position:position) = ''''
2258	position = INDEX( dopr_label(i) , '"' )
2259	ENDDO
2260
2261	ENDDO
2262
2263	!
2264	!-- y-value range of the coordinate system (PROFIL).
2265	!-- x-value range determined in plot_1d.
2266	IF ( .NOT. ocean ) THEN
2267	cross_uymin = 0.0
2268	IF ( z_max_do1d == -1.0 ) THEN
2269	cross_uymax = zu(nzt+1)
2270	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2271	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
2272	z_max_do1d,' must be >= ', zu(nzb+1), &
2273	' or <= ', zu(nzt+1)
2274	CALL local_stop
2275	ELSE
2276	cross_uymax = z_max_do1d
2277	ENDIF
2278	ENDIF
2279
2280	!
2281	!-- Check whether the chosen normalizing factor for the coordinate systems is
2282	!-- permissible
2283	DO i = 1, crmax
2284	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2285
2286	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2287	j = 0
2288
2289	CASE DEFAULT
2290	IF ( myid == 0 ) THEN
2291	PRINT*, '+++ check_parameters: unknown normalize method'
2292	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
2293	ENDIF
2294	CALL local_stop
2295
2296	END SELECT
2297	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2298
2299	CASE ( '', 'z_i' )
2300	j = 0
2301
2302	CASE DEFAULT
2303	IF ( myid == 0 ) THEN
2304	PRINT*, '+++ check_parameters: unknown normalize method'
2305	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
2306	ENDIF
2307	CALL local_stop
2308
2309	END SELECT
2310	ENDDO
2311	!
2312	!-- Check normalized y-value range of the coordinate system (PROFIL)
2313	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2314	THEN
2315	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
2316	'd=', z_max_do1d_normalized, ' must be >= 0.0'
2317	CALL local_stop
2318	ENDIF
2319
2320
2321	!
2322	!-- Append user-defined data output variables to the standard data output
2323	IF ( data_output_user(1) /= ' ' ) THEN
2324	i = 1
2325	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2326	i = i + 1
2327	ENDDO
2328	j = 1
2329	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2330	IF ( i > 100 ) THEN
2331	IF ( myid == 0 ) THEN
2332	PRINT*, '+++ check_parameters: number of output quantitities', &
2333	' given by data_output and data_output_user'
2334	PRINT*, ' exceeds the limit of 100'
2335	ENDIF
2336	CALL local_stop
2337	ENDIF
2338	data_output(i) = data_output_user(j)
2339	i = i + 1
2340	j = j + 1
2341	ENDDO
2342	ENDIF
2343
2344	!
2345	!-- Check and set steering parameters for 2d/3d data output and averaging
2346	i = 1
2347	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2348	!
2349	!-- Check for data averaging
2350	ilen = LEN_TRIM( data_output(i) )
2351	j = 0 ! no data averaging
2352	IF ( ilen > 3 ) THEN
2353	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2354	j = 1 ! data averaging
2355	data_output(i) = data_output(i)(1:ilen-3)
2356	ENDIF
2357	ENDIF
2358	!
2359	!-- Check for cross section or volume data
2360	ilen = LEN_TRIM( data_output(i) )
2361	k = 0 ! 3d data
2362	var = data_output(i)(1:ilen)
2363	IF ( ilen > 3 ) THEN
2364	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2365	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2366	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2367	k = 1 ! 2d data
2368	var = data_output(i)(1:ilen-3)
2369	ENDIF
2370	ENDIF
2371	!
2372	!-- Check for allowed value and set units
2373	SELECT CASE ( TRIM( var ) )
2374
2375	CASE ( 'e' )
2376	IF ( constant_diffusion ) THEN
2377	IF ( myid == 0 ) THEN
2378	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2379	'" requires constant_diffusion = .FALSE.'
2380	ENDIF
2381	CALL local_stop
2382	ENDIF
2383	unit = 'm2/s2'
2384
2385	CASE ( 'pc', 'pr' )
2386	IF ( .NOT. particle_advection ) THEN
2387	IF ( myid == 0 ) THEN
2388	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2389	'" requires a "particles_par"-NAMELIST'
2390	PRINT*, ' in the parameter file (PARIN)'
2391	ENDIF
2392	CALL local_stop
2393	ENDIF
2394	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2395	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2396
2397	CASE ( 'q', 'vpt' )
2398	IF ( .NOT. humidity ) THEN
2399	IF ( myid == 0 ) THEN
2400	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2401	'" requires humidity = .TRUE.'
2402	ENDIF
2403	CALL local_stop
2404	ENDIF
2405	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2406	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2407
2408	CASE ( 'ql' )
2409	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2410	IF ( myid == 0 ) THEN
2411	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2412	'" requires cloud_physics = .TRUE.'
2413	PRINT*, ' or cloud_droplets = .TRUE.'
2414	ENDIF
2415	CALL local_stop
2416	ENDIF
2417	unit = 'kg/kg'
2418
2419	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2420	IF ( .NOT. cloud_droplets ) THEN
2421	IF ( myid == 0 ) THEN
2422	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2423	'" requires cloud_droplets = .TRUE.'
2424	ENDIF
2425	CALL local_stop
2426	ENDIF
2427	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2428	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2429	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2430
2431	CASE ( 'qv' )
2432	IF ( .NOT. cloud_physics ) THEN
2433	IF ( myid == 0 ) THEN
2434	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2435	'" requires cloud_physics = .TRUE.'
2436	ENDIF
2437	CALL local_stop
2438	ENDIF
2439	unit = 'kg/kg'
2440
2441	CASE ( 'rho' )
2442	IF ( .NOT. ocean ) THEN
2443	IF ( myid == 0 ) THEN
2444	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2445	'" requires ocean = .TRUE.'
2446	ENDIF
2447	CALL local_stop
2448	ENDIF
2449	unit = 'kg/m3'
2450
2451	CASE ( 's' )
2452	IF ( .NOT. passive_scalar ) THEN
2453	IF ( myid == 0 ) THEN
2454	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2455	'" requires passive_scalar = .TRUE.'
2456	ENDIF
2457	CALL local_stop
2458	ENDIF
2459	unit = 'conc'
2460
2461	CASE ( 'sa' )
2462	IF ( .NOT. ocean ) THEN
2463	IF ( myid == 0 ) THEN
2464	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2465	'" requires ocean = .TRUE.'
2466	ENDIF
2467	CALL local_stop
2468	ENDIF
2469	unit = 'psu'
2470
2471	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2472	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2473	IF ( myid == 0 ) THEN
2474	PRINT*, '+++ check_parameters: illegal value for data_',&
2475	'output: "', TRIM( var ), '" is only allowed'
2476	PRINT*, ' for horizontal cross section'
2477	ENDIF
2478	CALL local_stop
2479	ENDIF
2480	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2481	IF ( myid == 0 ) THEN
2482	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2483	'" requires cloud_physics = .TRUE.'
2484	ENDIF
2485	CALL local_stop
2486	ENDIF
2487	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2488	IF ( myid == 0 ) THEN
2489	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2490	'" requires precipitation = .TRUE.'
2491	ENDIF
2492	CALL local_stop
2493	ENDIF
2494	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2495	IF ( myid == 0 ) THEN
2496	PRINT*, '+++ check_parameters: temporal averaging of ', &
2497	' precipitation amount "', TRIM( var ), &
2498	'" not possible'
2499	ENDIF
2500	CALL local_stop
2501	ENDIF
2502	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2503	IF ( myid == 0 ) THEN
2504	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2505	'" requires precipitation = .TRUE.'
2506	ENDIF
2507	CALL local_stop
2508	ENDIF
2509
2510
2511	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2512	IF ( TRIM( var ) == 't*' ) unit = 'K'
2513	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2514	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2515	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2516	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2517
2518	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2519	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2520	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2521	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2522	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2523	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2524	CONTINUE
2525
2526	CASE DEFAULT
2527	CALL user_check_data_output( var, unit )
2528
2529	IF ( unit == 'illegal' ) THEN
2530	IF ( myid == 0 ) THEN
2531	IF ( data_output_user(1) /= ' ' ) THEN
2532	PRINT*, '+++ check_parameters: illegal value for data_',&
2533	'output or data_output_user: "', &
2534	TRIM( data_output(i) ), '"'
2535	ELSE
2536	PRINT*, '+++ check_parameters: illegal value for data_',&
2537	'output: "', TRIM( data_output(i) ), '"'
2538	ENDIF
2539	ENDIF
2540	CALL local_stop
2541	ENDIF
2542
2543	END SELECT
2544	!
2545	!-- Set the internal steering parameters appropriately
2546	IF ( k == 0 ) THEN
2547	do3d_no(j) = do3d_no(j) + 1
2548	do3d(j,do3d_no(j)) = data_output(i)
2549	do3d_unit(j,do3d_no(j)) = unit
2550	ELSE
2551	do2d_no(j) = do2d_no(j) + 1
2552	do2d(j,do2d_no(j)) = data_output(i)
2553	do2d_unit(j,do2d_no(j)) = unit
2554	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2555	data_output_xy(j) = .TRUE.
2556	ENDIF
2557	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2558	data_output_xz(j) = .TRUE.
2559	ENDIF
2560	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2561	data_output_yz(j) = .TRUE.
2562	ENDIF
2563	ENDIF
2564
2565	IF ( j == 1 ) THEN
2566	!
2567	!-- Check, if variable is already subject to averaging
2568	found = .FALSE.
2569	DO k = 1, doav_n
2570	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2571	ENDDO
2572
2573	IF ( .NOT. found ) THEN
2574	doav_n = doav_n + 1
2575	doav(doav_n) = var
2576	ENDIF
2577	ENDIF
2578
2579	i = i + 1
2580	ENDDO
2581
2582	!
2583	!-- Store sectional planes in one shared array
2584	section(:,1) = section_xy
2585	section(:,2) = section_xz
2586	section(:,3) = section_yz
2587
2588	!
2589	!-- Upper plot limit (grid point value) for 1D profiles
2590	IF ( z_max_do1d == -1.0 ) THEN
2591	nz_do1d = nzt+1
2592	ELSE
2593	DO k = nzb+1, nzt+1
2594	nz_do1d = k
2595	IF ( zw(k) > z_max_do1d ) EXIT
2596	ENDDO
2597	ENDIF
2598
2599	!
2600	!-- Upper plot limit for 2D vertical sections
2601	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2602	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2603	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
2604	z_max_do2d, ' must be >= ', zu(nzb+1), &
2605	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
2606	CALL local_stop
2607	ENDIF
2608
2609	!
2610	!-- Upper plot limit for 3D arrays
2611	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2612
2613	!
2614	!-- Determine and check accuracy for compressed 3D plot output
2615	IF ( do3d_compress ) THEN
2616	!
2617	!-- Compression only permissible on T3E machines
2618	IF ( host(1:3) /= 't3e' ) THEN
2619	IF ( myid == 0 ) THEN
2620	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
2621	'ed on host "', TRIM( host ), '"'
2622	ENDIF
2623	CALL local_stop
2624	ENDIF
2625
2626	i = 1
2627	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2628
2629	ilen = LEN_TRIM( do3d_comp_prec(i) )
2630	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2631	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2632	IF ( myid == 0 ) THEN
2633	PRINT*, '+++ check_parameters: illegal precision: ', &
2634	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
2635	ENDIF
2636	CALL local_stop
2637	ENDIF
2638
2639	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2640	var = do3d_comp_prec(i)(1:ilen-1)
2641
2642	SELECT CASE ( var )
2643
2644	CASE ( 'u' )
2645	j = 1
2646	CASE ( 'v' )
2647	j = 2
2648	CASE ( 'w' )
2649	j = 3
2650	CASE ( 'p' )
2651	j = 4
2652	CASE ( 'pt' )
2653	j = 5
2654
2655	CASE DEFAULT
2656	IF ( myid == 0 ) THEN
2657	PRINT*, '+++ check_parameters: unknown variable in ', &
2658	'assignment'
2659	PRINT*, ' do3d_comp_prec(', i, ')="', &
2660	TRIM( do3d_comp_prec(i) ),'"'
2661	ENDIF
2662	CALL local_stop
2663
2664	END SELECT
2665
2666	plot_3d_precision(j)%precision = prec
2667	i = i + 1
2668
2669	ENDDO
2670	ENDIF
2671
2672	!
2673	!-- Check the data output format(s)
2674	IF ( data_output_format(1) == ' ' ) THEN
2675	!
2676	!-- Default value
2677	netcdf_output = .TRUE.
2678	ELSE
2679	i = 1
2680	DO WHILE ( data_output_format(i) /= ' ' )
2681
2682	SELECT CASE ( data_output_format(i) )
2683
2684	CASE ( 'netcdf' )
2685	netcdf_output = .TRUE.
2686	CASE ( 'iso2d' )
2687	iso2d_output = .TRUE.
2688	CASE ( 'profil' )
2689	profil_output = .TRUE.
2690	CASE ( 'avs' )
2691	avs_output = .TRUE.
2692
2693	CASE DEFAULT
2694	IF ( myid == 0 ) THEN
2695	PRINT*, '+++ check_parameters:'
2696	PRINT*, ' unknown value for data_output_format "', &
2697	TRIM( data_output_format(i) ),'"'
2698	ENDIF
2699	CALL local_stop
2700
2701	END SELECT
2702
2703	i = i + 1
2704	IF ( i > 10 ) EXIT
2705
2706	ENDDO
2707
2708	ENDIF
2709
2710	!
2711	!-- Check netcdf precison
2712	ldum = .FALSE.
2713	CALL define_netcdf_header( 'ch', ldum, 0 )
2714
2715	!
2716	!-- Check, whether a constant diffusion coefficient shall be used
2717	IF ( km_constant /= -1.0 ) THEN
2718	IF ( km_constant < 0.0 ) THEN
2719	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2720	km_constant, ' < 0.0'
2721	CALL local_stop
2722	ELSE
2723	IF ( prandtl_number < 0.0 ) THEN
2724	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2725	prandtl_number, ' < 0.0'
2726	CALL local_stop
2727	ENDIF
2728	constant_diffusion = .TRUE.
2729
2730	IF ( prandtl_layer ) THEN
2731	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2732	'is not allowed with fixed value of km'
2733	CALL local_stop
2734	ENDIF
2735	ENDIF
2736	ENDIF
2737
2738	!
2739	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2740	!-- for the horizontal diffusivity used within the outflow damping layer,
2741	!-- and check/set the width of the damping layer
2742	IF ( bc_lr /= 'cyclic' ) THEN
2743	IF ( km_damp_max == -1.0 ) THEN
2744	km_damp_max = 0.5 * dx
2745	ENDIF
2746	IF ( outflow_damping_width == -1.0 ) THEN
2747	outflow_damping_width = MIN( 20, nx/2 )
2748	ENDIF
2749	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2750	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2751	'idth out of range'
2752	CALL local_stop
2753	ENDIF
2754	ENDIF
2755
2756	IF ( bc_ns /= 'cyclic' ) THEN
2757	IF ( km_damp_max == -1.0 ) THEN
2758	km_damp_max = 0.5 * dy
2759	ENDIF
2760	IF ( outflow_damping_width == -1.0 ) THEN
2761	outflow_damping_width = MIN( 20, ny/2 )
2762	ENDIF
2763	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2764	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2765	'idth out of range'
2766	CALL local_stop
2767	ENDIF
2768	ENDIF
2769
2770	!
2771	!-- Check value range for rif
2772	IF ( rif_min >= rif_max ) THEN
2773	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2774	' must be less than rif_max=', rif_max
2775	CALL local_stop
2776	ENDIF
2777
2778	!
2779	!-- Determine upper and lower hight level indices for random perturbations
2780	IF ( disturbance_level_b == -9999999.9 ) THEN
2781	IF ( ocean ) THEN
2782	disturbance_level_b = zu((nzt*2)/3)
2783	disturbance_level_ind_b = ( nzt * 2 ) / 3
2784	ELSE
2785	disturbance_level_b = zu(nzb+3)
2786	disturbance_level_ind_b = nzb + 3
2787	ENDIF
2788	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2789	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2790	disturbance_level_b, ' must be >= ',zu(3), &
2791	'(zu(3))'
2792	CALL local_stop
2793	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2794	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2795	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2796	'(zu(nzt-2))'
2797	CALL local_stop
2798	ELSE
2799	DO k = 3, nzt-2
2800	IF ( disturbance_level_b <= zu(k) ) THEN
2801	disturbance_level_ind_b = k
2802	EXIT
2803	ENDIF
2804	ENDDO
2805	ENDIF
2806
2807	IF ( disturbance_level_t == -9999999.9 ) THEN
2808	IF ( ocean ) THEN
2809	disturbance_level_t = zu(nzt-3)
2810	disturbance_level_ind_t = nzt - 3
2811	ELSE
2812	disturbance_level_t = zu(nzt/3)
2813	disturbance_level_ind_t = nzt / 3
2814	ENDIF
2815	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2816	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2817	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2818	'(zu(nzt-2))'
2819	CALL local_stop
2820	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2821	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2822	disturbance_level_t, ' must be >= ', &
2823	'disturbance_level_b=', disturbance_level_b
2824	CALL local_stop
2825	ELSE
2826	DO k = 3, nzt-2
2827	IF ( disturbance_level_t <= zu(k) ) THEN
2828	disturbance_level_ind_t = k
2829	EXIT
2830	ENDIF
2831	ENDDO
2832	ENDIF
2833
2834	!
2835	!-- Check again whether the levels determined this way are ok.
2836	!-- Error may occur at automatic determination and too few grid points in
2837	!-- z-direction.
2838	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2839	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2840	'disturbance_level_ind_t=', &
2841	disturbance_level_ind_t, ' must be >= ', &
2842	'disturbance_level_ind_b=', &
2843	disturbance_level_ind_b
2844	CALL local_stop
2845	ENDIF
2846
2847	!
2848	!-- Determine the horizontal index range for random perturbations.
2849	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2850	!-- near the inflow and the perturbation area is further limited to ...(1)
2851	!-- after the initial phase of the flow.
2852	dist_nxl = 0; dist_nxr = nx
2853	dist_nys = 0; dist_nyn = ny
2854	IF ( bc_lr /= 'cyclic' ) THEN
2855	IF ( inflow_disturbance_begin == -1 ) THEN
2856	inflow_disturbance_begin = MIN( 10, nx/2 )
2857	ENDIF
2858	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2859	THEN
2860	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2861	'_begin out of range'
2862	CALL local_stop
2863	ENDIF
2864	IF ( inflow_disturbance_end == -1 ) THEN
2865	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2866	ENDIF
2867	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2868	THEN
2869	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2870	'_end out of range'
2871	CALL local_stop
2872	ENDIF
2873	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2874	IF ( inflow_disturbance_begin == -1 ) THEN
2875	inflow_disturbance_begin = MIN( 10, ny/2 )
2876	ENDIF
2877	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2878	THEN
2879	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2880	'_begin out of range'
2881	CALL local_stop
2882	ENDIF
2883	IF ( inflow_disturbance_end == -1 ) THEN
2884	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2885	ENDIF
2886	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2887	THEN
2888	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2889	'_end out of range'
2890	CALL local_stop
2891	ENDIF
2892	ENDIF
2893
2894	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2895	dist_nxr = nx - inflow_disturbance_begin
2896	dist_nxl(1) = nx - inflow_disturbance_end
2897	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2898	dist_nxl = inflow_disturbance_begin
2899	dist_nxr(1) = inflow_disturbance_end
2900	ENDIF
2901	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2902	dist_nyn = ny - inflow_disturbance_begin
2903	dist_nys(1) = ny - inflow_disturbance_end
2904	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2905	dist_nys = inflow_disturbance_begin
2906	dist_nyn(1) = inflow_disturbance_end
2907	ENDIF
2908
2909	!
2910	!-- Check random generator
2911	IF ( random_generator /= 'system-specific' .AND. &
2912	random_generator /= 'numerical-recipes' ) THEN
2913	IF ( myid == 0 ) THEN
2914	PRINT*, '+++ check_parameters:'
2915	PRINT*, ' unknown random generator: random_generator=', &
2916	random_generator
2917	ENDIF
2918	CALL local_stop
2919	ENDIF
2920
2921	!
2922	!-- Determine damping level index for 1D model
2923	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2924	IF ( damp_level_1d == -1.0 ) THEN
2925	damp_level_1d = zu(nzt+1)
2926	damp_level_ind_1d = nzt + 1
2927	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2928	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
2929	damp_level_1d, ' must be > 0.0 and < ', &
2930	'zu(nzt+1)', zu(nzt+1)
2931	CALL local_stop
2932	ELSE
2933	DO k = 1, nzt+1
2934	IF ( damp_level_1d <= zu(k) ) THEN
2935	damp_level_ind_1d = k
2936	EXIT
2937	ENDIF
2938	ENDDO
2939	ENDIF
2940	ENDIF
2941	!
2942	!-- Check some other 1d-model parameters
2943	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2944	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2945	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
2946	TRIM( mixing_length_1d ), '" is unknown'
2947	CALL local_stop
2948	ENDIF
2949	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2950	TRIM( dissipation_1d ) /= 'detering' ) THEN
2951	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
2952	TRIM( dissipation_1d ), '" is unknown'
2953	CALL local_stop
2954	ENDIF
2955
2956	!
2957	!-- Set time for the next user defined restart (time_restart is the
2958	!-- internal parameter for steering restart events)
2959	IF ( restart_time /= 9999999.9 ) THEN
2960	IF ( restart_time > simulated_time ) time_restart = restart_time
2961	ELSE
2962	!
2963	!-- In case of a restart run, set internal parameter to default (no restart)
2964	!-- if the NAMELIST-parameter restart_time is omitted
2965	time_restart = 9999999.9
2966	ENDIF
2967
2968	!
2969	!-- Set default value of the time needed to terminate a model run
2970	IF ( termination_time_needed == -1.0 ) THEN
2971	IF ( host(1:3) == 'ibm' ) THEN
2972	termination_time_needed = 300.0
2973	ELSE
2974	termination_time_needed = 35.0
2975	ENDIF
2976	ENDIF
2977
2978	!
2979	!-- Check the time needed to terminate a model run
2980	IF ( host(1:3) == 't3e' ) THEN
2981	!
2982	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2983	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2984	IF ( termination_time_needed <= 30.0 ) THEN
2985	IF ( myid == 0 ) THEN
2986	PRINT*, '+++ check_parameters: termination_time_needed', &
2987	termination_time_needed
2988	PRINT*, ' must be > 30.0 on host "', host, &
2989	'"'
2990	ENDIF
2991	CALL local_stop
2992	ENDIF
2993	ELSEIF ( host(1:3) == 'ibm' ) THEN
2994	!
2995	!-- On IBM-regatta machines the time should be at least 300 seconds,
2996	!-- because the job time consumed before executing palm (for compiling,
2997	!-- copying of files, etc.) has to be regarded
2998	IF ( termination_time_needed < 300.0 ) THEN
2999	IF ( myid == 0 ) THEN
3000	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
3001	'needed', termination_time_needed
3002	PRINT*, ' should be >= 300.0', &
3003	' on host "', host, '"'
3004	ENDIF
3005	ENDIF
3006	ENDIF
3007
3008
3009	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 113

Download in other formats: