Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1036

Last change on this file since 1036 was 1036, checked in by raasch, 12 years ago
code has been put under the GNU General Public License (v3)
Property svn:keywords set to `Id`
File size: 129.0 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1036 2012-10-22 13:43:42Z raasch $
27	!
28	! 1031/1034 2012-10-22 11:32:49Z raasch
29	! check of netcdf4 parallel file support
30	!
31	! 1019 2012-09-28 06:46:45Z raasch
32	! non-optimized version of prognostic_equations not allowed any more
33	!
34	! 1015 2012-09-27 09:23:24Z raasch
35	! acc allowed for loop optimization,
36	! checks for adjustment of mixing length to the Prandtl mixing length removed
37	!
38	! 1003 2012-09-14 14:35:53Z raasch
39	! checks for cases with unequal subdomain sizes removed
40	!
41	! 1001 2012-09-13 14:08:46Z raasch
42	! all actions concerning leapfrog- and upstream-spline-scheme removed
43	!
44	! 996 2012-09-07 10:41:47Z raasch
45	! little reformatting
46
47	! 978 2012-08-09 08:28:32Z fricke
48	! setting of bc_lr/ns_dirneu/neudir
49	! outflow damping layer removed
50	! check for z0h*
51	! check for pt_damping_width
52	!
53	! 964 2012-07-26 09:14:24Z raasch
54	! check of old profil-parameters removed
55	!
56	! 940 2012-07-09 14:31:00Z raasch
57	! checks for parameter neutral
58	!
59	! 924 2012-06-06 07:44:41Z maronga
60	! Bugfix: preprocessor directives caused error during compilation
61	!
62	! 892 2012-05-02 13:51:44Z maronga
63	! Bugfix for parameter file check ( excluding __netcdf4 )
64	!
65	! 866 2012-03-28 06:44:41Z raasch
66	! use only 60% of the geostrophic wind as translation speed in case of Galilean
67	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
68	! timestep
69	!
70	! 861 2012-03-26 14:18:34Z suehring
71	! Check for topography and ws-scheme removed.
72	! Check for loop_optimization = 'vector' and ws-scheme removed.
73	!
74	! 845 2012-03-07 10:23:05Z maronga
75	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
76	!
77	! 828 2012-02-21 12:00:36Z raasch
78	! check of collision_kernel extended
79	!
80	! 825 2012-02-19 03:03:44Z raasch
81	! check for collision_kernel and curvature_solution_effects
82	!
83	! 809 2012-01-30 13:32:58Z maronga
84	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
85	!
86	! 807 2012-01-25 11:53:51Z maronga
87	! New cpp directive "__check" implemented which is used by check_namelist_files
88	!
89	! 774 2011-10-27 13:34:16Z letzel
90	! bugfix for prescribed u,v-profiles
91	!
92	! 767 2011-10-14 06:39:12Z raasch
93	! Calculating u,v-profiles from given profiles by linear interpolation.
94	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
95	!
96	! 707 2011-03-29 11:39:40Z raasch
97	! setting of bc_lr/ns_dirrad/raddir
98	!
99	! 689 2011-02-20 19:31:12z gryschka
100	! Bugfix for some logical expressions
101	! (syntax was not compatible with all compilers)
102	!
103	! 680 2011-02-04 23:16:06Z gryschka
104	! init_vortex is not allowed with volume_flow_control
105	!
106	! 673 2011-01-18 16:19:48Z suehring
107	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
108	!
109	! 667 2010-12-23 12:06:00Z suehring/gryschka
110	! Exchange of parameters between ocean and atmosphere via PE0
111	! Check for illegal combination of ws-scheme and timestep scheme.
112	! Check for topography and ws-scheme.
113	! Check for not cyclic boundary conditions in combination with ws-scheme and
114	! loop_optimization = 'vector'.
115	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
116	! Different processor/grid topology in atmosphere and ocean is now allowed!
117	! Bugfixes in checking for conserve_volume_flow_mode
118	! 600 2010-11-24 16:10:51Z raasch
119	! change due to new default value of surface_waterflux
120	! 580 2010-10-05 13:59:11Z heinze
121	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
122	!
123	! 567 2010-10-01 10:46:30Z helmke
124	! calculating masks changed
125	!
126	! 564 2010-09-30 13:18:59Z helmke
127	! palm message identifiers of masked output changed, 20 replaced by max_masks
128	!
129	! 553 2010-09-01 14:09:06Z weinreis
130	! masks is calculated and removed from inipar
131	!
132	! 531 2010-04-21 06:47:21Z heinze
133	! Bugfix: unit of hyp changed to dbar
134	!
135	! 524 2010-03-30 02:04:51Z raasch
136	! Bugfix: "/" in netcdf profile variable names replaced by ":"
137	!
138	! 493 2010-03-01 08:30:24Z raasch
139	! netcdf_data_format is checked
140	!
141	! 411 2009-12-11 14:15:58Z heinze
142	! Enabled passive scalar/humidity wall fluxes for non-flat topography
143	! Initialization of large scale vertical motion (subsidence/ascent)
144	!
145	! 410 2009-12-04 17:05:40Z letzel
146	! masked data output
147	!
148	! 388 2009-09-23 09:40:33Z raasch
149	! Check profiles fpr prho and hyp.
150	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
151	! interval has been set, respective error message is included
152	! bc_lr_cyc and bc_ns_cyc are set,
153	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
154	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
155	! Coupling with independent precursor runs.
156	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
157	! Bugfix: pressure included for profile output
158	! Check pressure gradient conditions
159	! topography_grid_convention moved from user_check_parameters
160	! 'single_street_canyon'
161	! Added shf* and qsws* to the list of available output data
162	!
163	! 222 2009-01-12 16:04:16Z letzel
164	! +user_check_parameters
165	! Output of messages replaced by message handling routine.
166	! Implementation of an MPI-1 coupling: replaced myid with target_id,
167	! deleted __mpi2 directives
168	! Check that PALM is called with mrun -K parallel for coupling
169	!
170	! 197 2008-09-16 15:29:03Z raasch
171	! Bug fix: Construction of vertical profiles when 10 gradients have been
172	! specified in the parameter list (ug, vg, pt, q, sa, lad)
173	!
174	! Strict grid matching along z is not needed for mg-solver.
175	! Leaf area density (LAD) explicitly set to its surface value at k=0
176	! Case of reading data for recycling included in initializing_actions,
177	! check of turbulent_inflow and calculation of recycling_plane.
178	! q*2 profile added
179	!
180	! 138 2007-11-28 10:03:58Z letzel
181	! Plant canopy added
182	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
183	! Multigrid solver allows topography, checking of dt_sort_particles
184	! Bugfix: initializing u_init and v_init in case of ocean runs
185	!
186	! 109 2007-08-28 15:26:47Z letzel
187	! Check coupling_mode and set default (obligatory) values (like boundary
188	! conditions for temperature and fluxes) in case of coupled runs.
189	! +profiles for wp and w"e
190	! Bugfix: Error message concerning output of particle concentration (pc)
191	! modified
192	! More checks and more default values for coupled runs
193	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
194	! cloud_physics = .T.)
195	! Rayleigh damping for ocean fixed.
196	! Check and, if necessary, set default value for dt_coupling
197	!
198	! 97 2007-06-21 08:23:15Z raasch
199	! Initial salinity profile is calculated, salinity boundary conditions are
200	! checked,
201	! z_max_do1d is checked only in case of ocean = .f.,
202	! +initial temperature and geostrophic velocity profiles for the ocean version,
203	! use_pt_reference renamed use_reference
204	!
205	! 89 2007-05-25 12:08:31Z raasch
206	! Check for user-defined profiles
207	!
208	! 75 2007-03-22 09:54:05Z raasch
209	! "by_user" allowed as initializing action, -data_output_ts,
210	! leapfrog with non-flat topography not allowed any more, loop_optimization
211	! and pt_reference are checked, moisture renamed humidity,
212	! output of precipitation amount/rate and roughnes length + check
213	! possible negative humidities are avoided in initial profile,
214	! dirichlet/neumann changed to dirichlet/radiation, etc.,
215	! revision added to run_description_header
216	!
217	! 20 2007-02-26 00:12:32Z raasch
218	! Temperature and humidity gradients at top are now calculated for nzt+1,
219	! top_heatflux and respective boundary condition bc_pt_t is checked
220	!
221	! RCS Log replace by Id keyword, revision history cleaned up
222	!
223	! Revision 1.61 2006/08/04 14:20:25 raasch
224	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
225	! use_upstream_for_tke, default value for dt_dopts,
226	! generation of file header moved from routines palm and header to here
227	!
228	! Revision 1.1 1997/08/26 06:29:23 raasch
229	! Initial revision
230	!
231	!
232	! Description:
233	! ------------
234	! Check control parameters and deduce further quantities.
235	!------------------------------------------------------------------------------!
236
237	USE arrays_3d
238	USE cloud_parameters
239	USE constants
240	USE control_parameters
241	USE dvrp_variables
242	USE grid_variables
243	USE indices
244	USE model_1d
245	USE netcdf_control
246	USE particle_attributes
247	USE pegrid
248	USE profil_parameter
249	USE subsidence_mod
250	USE statistics
251	USE transpose_indices
252
253	IMPLICIT NONE
254
255	CHARACTER (LEN=1) :: sq
256	CHARACTER (LEN=6) :: var
257	CHARACTER (LEN=7) :: unit
258	CHARACTER (LEN=8) :: date
259	CHARACTER (LEN=10) :: time
260	CHARACTER (LEN=40) :: coupling_string
261	CHARACTER (LEN=100) :: action
262
263	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
264	position, prec
265	LOGICAL :: found, ldum
266	REAL :: gradient, maxn, maxp, remote = 0.0, &
267	simulation_time_since_reference
268
269	!
270	!-- Warning, if host is not set
271	IF ( host(1:1) == ' ' ) THEN
272	message_string = '"host" is not set. Please check that environment ' // &
273	'variable "localhost" & is set before running PALM'
274	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
275	ENDIF
276
277	!
278	!-- Check the coupling mode
279	IF ( coupling_mode /= 'uncoupled' .AND. &
280	coupling_mode /= 'atmosphere_to_ocean' .AND. &
281	coupling_mode /= 'ocean_to_atmosphere' ) THEN
282	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
283	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
284	ENDIF
285
286	!
287	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
288	IF ( coupling_mode /= 'uncoupled') THEN
289
290	IF ( dt_coupling == 9999999.9 ) THEN
291	message_string = 'dt_coupling is not set but required for coup' // &
292	'ling mode "' // TRIM( coupling_mode ) // '"'
293	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
294	ENDIF
295
296	#if defined( __parallel )
297
298	!
299	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
300	!-- program.
301	!-- check_namelist_files will need the following information of the other
302	!-- model (atmosphere/ocean).
303	! dt_coupling = remote
304	! dt_max = remote
305	! restart_time = remote
306	! dt_restart= remote
307	! simulation_time_since_reference = remote
308	! dx = remote
309
310
311	#if ! defined( __check )
312	IF ( myid == 0 ) THEN
313	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
314	ierr )
315	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
316	status, ierr )
317	ENDIF
318	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
319	#endif
320	IF ( dt_coupling /= remote ) THEN
321	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
322	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
323	'dt_coupling_remote = ', remote
324	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
325	ENDIF
326	IF ( dt_coupling <= 0.0 ) THEN
327	#if ! defined( __check )
328	IF ( myid == 0 ) THEN
329	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
330	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
331	status, ierr )
332	ENDIF
333	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
334	#endif
335	dt_coupling = MAX( dt_max, remote )
336	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
337	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
338	'MAX(dt_max(A,O)) = ', dt_coupling
339	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
340	ENDIF
341	#if ! defined( __check )
342	IF ( myid == 0 ) THEN
343	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
344	ierr )
345	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
346	status, ierr )
347	ENDIF
348	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
349	#endif
350	IF ( restart_time /= remote ) THEN
351	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
352	'": restart_time = ', restart_time, '& is not equal to ', &
353	'restart_time_remote = ', remote
354	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
355	ENDIF
356	#if ! defined( __check )
357	IF ( myid == 0 ) THEN
358	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
359	ierr )
360	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
361	status, ierr )
362	ENDIF
363	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
364	#endif
365	IF ( dt_restart /= remote ) THEN
366	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
367	'": dt_restart = ', dt_restart, '& is not equal to ', &
368	'dt_restart_remote = ', remote
369	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
370	ENDIF
371
372	simulation_time_since_reference = end_time - coupling_start_time
373	#if ! defined( __check )
374	IF ( myid == 0 ) THEN
375	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
376	14, comm_inter, ierr )
377	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
378	status, ierr )
379	ENDIF
380	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
381	#endif
382	IF ( simulation_time_since_reference /= remote ) THEN
383	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
384	'": simulation_time_since_reference = ', &
385	simulation_time_since_reference, '& is not equal to ', &
386	'simulation_time_since_reference_remote = ', remote
387	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
388	ENDIF
389
390	#if ! defined( __check )
391	IF ( myid == 0 ) THEN
392	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
393	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
394	status, ierr )
395	ENDIF
396	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
397
398	#endif
399	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
400
401	IF ( dx < remote ) THEN
402	WRITE( message_string, * ) 'coupling mode "', &
403	TRIM( coupling_mode ), &
404	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
405	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
406	ENDIF
407
408	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
409	WRITE( message_string, * ) 'coupling mode "', &
410	TRIM( coupling_mode ), &
411	'": Domain size in x-direction is not equal in ocean and atmosphere'
412	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
413	ENDIF
414
415	ENDIF
416
417	#if ! defined( __check )
418	IF ( myid == 0) THEN
419	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
420	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
421	status, ierr )
422	ENDIF
423	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
424	#endif
425	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
426
427	IF ( dy < remote ) THEN
428	WRITE( message_string, * ) 'coupling mode "', &
429	TRIM( coupling_mode ), &
430	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
431	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
432	ENDIF
433
434	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
435	WRITE( message_string, * ) 'coupling mode "', &
436	TRIM( coupling_mode ), &
437	'": Domain size in y-direction is not equal in ocean and atmosphere'
438	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
439	ENDIF
440
441	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
442	WRITE( message_string, * ) 'coupling mode "', &
443	TRIM( coupling_mode ), &
444	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
445	' atmosphere'
446	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
447	ENDIF
448
449	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
450	WRITE( message_string, * ) 'coupling mode "', &
451	TRIM( coupling_mode ), &
452	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
453	' atmosphere'
454	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
455	ENDIF
456
457	ENDIF
458	#else
459	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
460	' ''mrun -K parallel'''
461	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
462	#endif
463	ENDIF
464
465	#if defined( __parallel ) && ! defined ( __check )
466	!
467	!-- Exchange via intercommunicator
468	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
469	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
470	ierr )
471	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
472	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
473	comm_inter, status, ierr )
474	ENDIF
475	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
476
477	#endif
478
479
480	!
481	!-- Generate the file header which is used as a header for most of PALM's
482	!-- output files
483	CALL DATE_AND_TIME( date, time )
484	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
485	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
486	IF ( coupling_mode == 'uncoupled' ) THEN
487	coupling_string = ''
488	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
489	coupling_string = ' coupled (atmosphere)'
490	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
491	coupling_string = ' coupled (ocean)'
492	ENDIF
493
494	WRITE ( run_description_header, &
495	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
496	TRIM( version ), TRIM( revision ), 'run: ', &
497	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
498	'host: ', TRIM( host ), run_date, run_time
499
500	!
501	!-- Check the general loop optimization method
502	IF ( loop_optimization == 'default' ) THEN
503	IF ( host(1:3) == 'nec' ) THEN
504	loop_optimization = 'vector'
505	ELSE
506	loop_optimization = 'cache'
507	ENDIF
508	ENDIF
509
510	SELECT CASE ( TRIM( loop_optimization ) )
511
512	CASE ( 'acc', 'cache', 'vector' )
513	CONTINUE
514
515	CASE DEFAULT
516	message_string = 'illegal value given for loop_optimization: "' // &
517	TRIM( loop_optimization ) // '"'
518	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
519
520	END SELECT
521
522	!
523	!-- Check topography setting (check for illegal parameter combinations)
524	IF ( topography /= 'flat' ) THEN
525	action = ' '
526	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
527	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
528	ENDIF
529	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
530	THEN
531	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
532	ENDIF
533	IF ( psolver == 'sor' ) THEN
534	WRITE( action, '(A,A)' ) 'psolver = ', psolver
535	ENDIF
536	IF ( sloping_surface ) THEN
537	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
538	ENDIF
539	IF ( galilei_transformation ) THEN
540	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
541	ENDIF
542	IF ( cloud_physics ) THEN
543	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
544	ENDIF
545	IF ( cloud_droplets ) THEN
546	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
547	ENDIF
548	IF ( .NOT. prandtl_layer ) THEN
549	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
550	ENDIF
551	IF ( action /= ' ' ) THEN
552	message_string = 'a non-flat topography does not allow ' // &
553	TRIM( action )
554	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
555	ENDIF
556	!
557	!-- In case of non-flat topography, check whether the convention how to
558	!-- define the topography grid has been set correctly, or whether the default
559	!-- is applicable. If this is not possible, abort.
560	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
561	IF ( TRIM( topography ) /= 'single_building' .AND. &
562	TRIM( topography ) /= 'single_street_canyon' .AND. &
563	TRIM( topography ) /= 'read_from_file' ) THEN
564	!-- The default value is not applicable here, because it is only valid
565	!-- for the two standard cases 'single_building' and 'read_from_file'
566	!-- defined in init_grid.
567	WRITE( message_string, * ) &
568	'The value for "topography_grid_convention" ', &
569	'is not set. Its default value is & only valid for ', &
570	'"topography" = ''single_building'', ', &
571	'''single_street_canyon'' & or ''read_from_file''.', &
572	' & Choose ''cell_edge'' or ''cell_center''.'
573	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
574	ELSE
575	!-- The default value is applicable here.
576	!-- Set convention according to topography.
577	IF ( TRIM( topography ) == 'single_building' .OR. &
578	TRIM( topography ) == 'single_street_canyon' ) THEN
579	topography_grid_convention = 'cell_edge'
580	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
581	topography_grid_convention = 'cell_center'
582	ENDIF
583	ENDIF
584	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
585	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
586	WRITE( message_string, * ) &
587	'The value for "topography_grid_convention" is ', &
588	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
589	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
590	ENDIF
591
592	ENDIF
593
594	!
595	!-- Check ocean setting
596	IF ( ocean ) THEN
597
598	action = ' '
599	IF ( action /= ' ' ) THEN
600	message_string = 'ocean = .T. does not allow ' // TRIM( action )
601	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
602	ENDIF
603
604	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
605	TRIM( coupling_char ) == '_O' ) THEN
606
607	!
608	!-- Check whether an (uncoupled) atmospheric run has been declared as an
609	!-- ocean run (this setting is done via mrun-option -y)
610
611	message_string = 'ocean = .F. does not allow coupling_char = "' // &
612	TRIM( coupling_char ) // '" set by mrun-option "-y"'
613	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
614
615	ENDIF
616
617	!
618	!-- Check whether there are any illegal values
619	!-- Pressure solver:
620	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
621	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
622	message_string = 'unknown solver for perturbation pressure: psolver' // &
623	' = "' // TRIM( psolver ) // '"'
624	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
625	ENDIF
626
627	#if defined( __parallel )
628	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
629	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
630	'for a 1d domain-decomposition along x & please do' // &
631	' not set npey/=1 in the parameter file'
632	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
633	ENDIF
634	#else
635	IF ( psolver == 'poisfft_hybrid' ) THEN
636	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
637	' for a parallel environment'
638	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
639	ENDIF
640	#endif
641
642	IF ( psolver == 'multigrid' ) THEN
643	IF ( cycle_mg == 'w' ) THEN
644	gamma_mg = 2
645	ELSEIF ( cycle_mg == 'v' ) THEN
646	gamma_mg = 1
647	ELSE
648	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
649	TRIM( cycle_mg ) // '"'
650	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
651	ENDIF
652	ENDIF
653
654	IF ( fft_method /= 'singleton-algorithm' .AND. &
655	fft_method /= 'temperton-algorithm' .AND. &
656	fft_method /= 'system-specific' ) THEN
657	message_string = 'unknown fft-algorithm: fft_method = "' // &
658	TRIM( fft_method ) // '"'
659	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
660	ENDIF
661
662	IF( momentum_advec == 'ws-scheme' .AND. &
663	.NOT. call_psolver_at_all_substeps ) THEN
664	message_string = 'psolver must be called at each RK3 substep when "'//&
665	TRIM(momentum_advec) // ' "is used for momentum_advec'
666	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
667	END IF
668	!
669	!-- Advection schemes:
670	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
671	THEN
672	message_string = 'unknown advection scheme: momentum_advec = "' // &
673	TRIM( momentum_advec ) // '"'
674	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
675	ENDIF
676	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
677	.AND. ( timestep_scheme == 'euler' .OR. &
678	timestep_scheme == 'runge-kutta-2' ) ) &
679	THEN
680	message_string = 'momentum_advec or scalar_advec = "' &
681	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
682	TRIM( timestep_scheme ) // '"'
683	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
684	ENDIF
685	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
686	scalar_advec /= 'bc-scheme' ) &
687	THEN
688	message_string = 'unknown advection scheme: scalar_advec = "' // &
689	TRIM( scalar_advec ) // '"'
690	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
691	ENDIF
692	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
693	THEN
694	message_string = 'advection_scheme scalar_advec = "' &
695	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
696	TRIM( loop_optimization ) // '"'
697	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
698	ENDIF
699
700	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
701	use_upstream_for_tke = .TRUE.
702	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
703	'use_sgs_for_particles = .TRUE.'
704	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
705	ENDIF
706
707	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
708	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
709	'curvature_solution_effects = .TRUE.'
710	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
711	ENDIF
712
713	!
714	!-- Set LOGICAL switches to enhance performance
715	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
716	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
717
718	!
719	!-- Timestep schemes:
720	SELECT CASE ( TRIM( timestep_scheme ) )
721
722	CASE ( 'euler' )
723	intermediate_timestep_count_max = 1
724
725	CASE ( 'runge-kutta-2' )
726	intermediate_timestep_count_max = 2
727
728	CASE ( 'runge-kutta-3' )
729	intermediate_timestep_count_max = 3
730
731	CASE DEFAULT
732	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
733	TRIM( timestep_scheme ) // '"'
734	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
735
736	END SELECT
737
738	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
739	.AND. timestep_scheme(1:5) == 'runge' ) THEN
740	message_string = 'momentum advection scheme "' // &
741	TRIM( momentum_advec ) // '" & does not work with ' // &
742	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
743	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
744	ENDIF
745
746	!
747	!-- Collision kernels:
748	SELECT CASE ( TRIM( collision_kernel ) )
749
750	CASE ( 'hall', 'hall_fast' )
751	hall_kernel = .TRUE.
752
753	CASE ( 'palm' )
754	palm_kernel = .TRUE.
755
756	CASE ( 'wang', 'wang_fast' )
757	wang_kernel = .TRUE.
758
759	CASE ( 'none' )
760
761
762	CASE DEFAULT
763	message_string = 'unknown collision kernel: collision_kernel = "' // &
764	TRIM( collision_kernel ) // '"'
765	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
766
767	END SELECT
768	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
769
770	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
771	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
772	!
773	!-- No restart run: several initialising actions are possible
774	action = initializing_actions
775	DO WHILE ( TRIM( action ) /= '' )
776	position = INDEX( action, ' ' )
777	SELECT CASE ( action(1:position-1) )
778
779	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
780	'by_user', 'initialize_vortex', 'initialize_ptanom' )
781	action = action(position+1:)
782
783	CASE DEFAULT
784	message_string = 'initializing_action = "' // &
785	TRIM( action ) // '" unkown or not allowed'
786	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
787
788	END SELECT
789	ENDDO
790	ENDIF
791
792	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
793	conserve_volume_flow ) THEN
794	message_string = 'initializing_actions = "initialize_vortex"' // &
795	' ist not allowed with conserve_volume_flow = .T.'
796	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
797	ENDIF
798
799
800	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
801	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
802	message_string = 'initializing_actions = "set_constant_profiles"' // &
803	' and "set_1d-model_profiles" are not allowed ' // &
804	'simultaneously'
805	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
806	ENDIF
807
808	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
809	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
810	message_string = 'initializing_actions = "set_constant_profiles"' // &
811	' and "by_user" are not allowed simultaneously'
812	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
813	ENDIF
814
815	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
816	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
817	message_string = 'initializing_actions = "by_user" and ' // &
818	'"set_1d-model_profiles" are not allowed simultaneously'
819	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
820	ENDIF
821
822	IF ( cloud_physics .AND. .NOT. humidity ) THEN
823	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
824	'not allowed with humidity = ', humidity
825	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
826	ENDIF
827
828	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
829	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
830	'not allowed with cloud_physics = ', cloud_physics
831	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
832	ENDIF
833
834	IF ( humidity .AND. sloping_surface ) THEN
835	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
836	'are not allowed simultaneously'
837	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
838	ENDIF
839
840	IF ( passive_scalar .AND. humidity ) THEN
841	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
842	'is not allowed simultaneously'
843	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
844	ENDIF
845
846	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
847	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
848	'coefficient & given value is drag_coefficient = 0.0'
849	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
850	ENDIF
851
852	!
853	!-- In case of no model continuation run, check initialising parameters and
854	!-- deduce further quantities
855	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
856
857	!
858	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
859	pt_init = pt_surface
860	IF ( humidity ) q_init = q_surface
861	IF ( ocean ) sa_init = sa_surface
862	IF ( passive_scalar ) q_init = s_surface
863	IF ( plant_canopy ) lad = 0.0
864
865	!
866	!--
867	!-- If required, compute initial profile of the geostrophic wind
868	!-- (component ug)
869	i = 1
870	gradient = 0.0
871
872	IF ( .NOT. ocean ) THEN
873
874	ug_vertical_gradient_level_ind(1) = 0
875	ug(0) = ug_surface
876	DO k = 1, nzt+1
877	IF ( i < 11 ) THEN
878	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
879	ug_vertical_gradient_level(i) >= 0.0 ) THEN
880	gradient = ug_vertical_gradient(i) / 100.0
881	ug_vertical_gradient_level_ind(i) = k - 1
882	i = i + 1
883	ENDIF
884	ENDIF
885	IF ( gradient /= 0.0 ) THEN
886	IF ( k /= 1 ) THEN
887	ug(k) = ug(k-1) + dzu(k) * gradient
888	ELSE
889	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
890	ENDIF
891	ELSE
892	ug(k) = ug(k-1)
893	ENDIF
894	ENDDO
895
896	ELSE
897
898	ug_vertical_gradient_level_ind(1) = nzt+1
899	ug(nzt+1) = ug_surface
900	DO k = nzt, nzb, -1
901	IF ( i < 11 ) THEN
902	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
903	ug_vertical_gradient_level(i) <= 0.0 ) THEN
904	gradient = ug_vertical_gradient(i) / 100.0
905	ug_vertical_gradient_level_ind(i) = k + 1
906	i = i + 1
907	ENDIF
908	ENDIF
909	IF ( gradient /= 0.0 ) THEN
910	IF ( k /= nzt ) THEN
911	ug(k) = ug(k+1) - dzu(k+1) * gradient
912	ELSE
913	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
914	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
915	ENDIF
916	ELSE
917	ug(k) = ug(k+1)
918	ENDIF
919	ENDDO
920
921	ENDIF
922
923	!
924	!-- In case of no given gradients for ug, choose a zero gradient
925	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
926	ug_vertical_gradient_level(1) = 0.0
927	ENDIF
928
929	!
930	!--
931	!-- If required, compute initial profile of the geostrophic wind
932	!-- (component vg)
933	i = 1
934	gradient = 0.0
935
936	IF ( .NOT. ocean ) THEN
937
938	vg_vertical_gradient_level_ind(1) = 0
939	vg(0) = vg_surface
940	DO k = 1, nzt+1
941	IF ( i < 11 ) THEN
942	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
943	vg_vertical_gradient_level(i) >= 0.0 ) THEN
944	gradient = vg_vertical_gradient(i) / 100.0
945	vg_vertical_gradient_level_ind(i) = k - 1
946	i = i + 1
947	ENDIF
948	ENDIF
949	IF ( gradient /= 0.0 ) THEN
950	IF ( k /= 1 ) THEN
951	vg(k) = vg(k-1) + dzu(k) * gradient
952	ELSE
953	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
954	ENDIF
955	ELSE
956	vg(k) = vg(k-1)
957	ENDIF
958	ENDDO
959
960	ELSE
961
962	vg_vertical_gradient_level_ind(1) = nzt+1
963	vg(nzt+1) = vg_surface
964	DO k = nzt, nzb, -1
965	IF ( i < 11 ) THEN
966	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
967	vg_vertical_gradient_level(i) <= 0.0 ) THEN
968	gradient = vg_vertical_gradient(i) / 100.0
969	vg_vertical_gradient_level_ind(i) = k + 1
970	i = i + 1
971	ENDIF
972	ENDIF
973	IF ( gradient /= 0.0 ) THEN
974	IF ( k /= nzt ) THEN
975	vg(k) = vg(k+1) - dzu(k+1) * gradient
976	ELSE
977	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
978	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
979	ENDIF
980	ELSE
981	vg(k) = vg(k+1)
982	ENDIF
983	ENDDO
984
985	ENDIF
986
987	!
988	!-- In case of no given gradients for vg, choose a zero gradient
989	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
990	vg_vertical_gradient_level(1) = 0.0
991	ENDIF
992
993	!
994	!-- Let the initial wind profiles be the calculated ug/vg profiles or
995	!-- interpolate them from wind profile data (if given)
996	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
997
998	u_init = ug
999	v_init = vg
1000
1001	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1002
1003	IF ( uv_heights(1) /= 0.0 ) THEN
1004	message_string = 'uv_heights(1) must be 0.0'
1005	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1006	ENDIF
1007
1008	use_prescribed_profile_data = .TRUE.
1009
1010	kk = 1
1011	u_init(0) = 0.0
1012	v_init(0) = 0.0
1013
1014	DO k = 1, nz+1
1015
1016	IF ( kk < 100 ) THEN
1017	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1018	kk = kk + 1
1019	IF ( kk == 100 ) EXIT
1020	ENDDO
1021	ENDIF
1022
1023	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1024	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1025	( uv_heights(kk+1) - uv_heights(kk) ) * &
1026	( u_profile(kk+1) - u_profile(kk) )
1027	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1028	( uv_heights(kk+1) - uv_heights(kk) ) * &
1029	( v_profile(kk+1) - v_profile(kk) )
1030	ELSE
1031	u_init(k) = u_profile(kk)
1032	v_init(k) = v_profile(kk)
1033	ENDIF
1034
1035	ENDDO
1036
1037	ELSE
1038
1039	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1040	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1041
1042	ENDIF
1043
1044	!
1045	!-- Compute initial temperature profile using the given temperature gradients
1046	IF ( .NOT. neutral ) THEN
1047
1048	i = 1
1049	gradient = 0.0
1050
1051	IF ( .NOT. ocean ) THEN
1052
1053	pt_vertical_gradient_level_ind(1) = 0
1054	DO k = 1, nzt+1
1055	IF ( i < 11 ) THEN
1056	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1057	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1058	gradient = pt_vertical_gradient(i) / 100.0
1059	pt_vertical_gradient_level_ind(i) = k - 1
1060	i = i + 1
1061	ENDIF
1062	ENDIF
1063	IF ( gradient /= 0.0 ) THEN
1064	IF ( k /= 1 ) THEN
1065	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1066	ELSE
1067	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
1068	ENDIF
1069	ELSE
1070	pt_init(k) = pt_init(k-1)
1071	ENDIF
1072	ENDDO
1073
1074	ELSE
1075
1076	pt_vertical_gradient_level_ind(1) = nzt+1
1077	DO k = nzt, 0, -1
1078	IF ( i < 11 ) THEN
1079	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1080	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1081	gradient = pt_vertical_gradient(i) / 100.0
1082	pt_vertical_gradient_level_ind(i) = k + 1
1083	i = i + 1
1084	ENDIF
1085	ENDIF
1086	IF ( gradient /= 0.0 ) THEN
1087	IF ( k /= nzt ) THEN
1088	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1089	ELSE
1090	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1091	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1092	ENDIF
1093	ELSE
1094	pt_init(k) = pt_init(k+1)
1095	ENDIF
1096	ENDDO
1097
1098	ENDIF
1099
1100	ENDIF
1101
1102	!
1103	!-- In case of no given temperature gradients, choose gradient of neutral
1104	!-- stratification
1105	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1106	pt_vertical_gradient_level(1) = 0.0
1107	ENDIF
1108
1109	!
1110	!-- Store temperature gradient at the top boundary for possible Neumann
1111	!-- boundary condition
1112	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1113
1114	!
1115	!-- If required, compute initial humidity or scalar profile using the given
1116	!-- humidity/scalar gradient. In case of scalar transport, initially store
1117	!-- values of the scalar parameters on humidity parameters
1118	IF ( passive_scalar ) THEN
1119	bc_q_b = bc_s_b
1120	bc_q_t = bc_s_t
1121	q_surface = s_surface
1122	q_surface_initial_change = s_surface_initial_change
1123	q_vertical_gradient = s_vertical_gradient
1124	q_vertical_gradient_level = s_vertical_gradient_level
1125	surface_waterflux = surface_scalarflux
1126	wall_humidityflux = wall_scalarflux
1127	ENDIF
1128
1129	IF ( humidity .OR. passive_scalar ) THEN
1130
1131	i = 1
1132	gradient = 0.0
1133	q_vertical_gradient_level_ind(1) = 0
1134	DO k = 1, nzt+1
1135	IF ( i < 11 ) THEN
1136	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1137	q_vertical_gradient_level(i) >= 0.0 ) THEN
1138	gradient = q_vertical_gradient(i) / 100.0
1139	q_vertical_gradient_level_ind(i) = k - 1
1140	i = i + 1
1141	ENDIF
1142	ENDIF
1143	IF ( gradient /= 0.0 ) THEN
1144	IF ( k /= 1 ) THEN
1145	q_init(k) = q_init(k-1) + dzu(k) * gradient
1146	ELSE
1147	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1148	ENDIF
1149	ELSE
1150	q_init(k) = q_init(k-1)
1151	ENDIF
1152	!
1153	!-- Avoid negative humidities
1154	IF ( q_init(k) < 0.0 ) THEN
1155	q_init(k) = 0.0
1156	ENDIF
1157	ENDDO
1158
1159	!
1160	!-- In case of no given humidity gradients, choose zero gradient
1161	!-- conditions
1162	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1163	q_vertical_gradient_level(1) = 0.0
1164	ENDIF
1165
1166	!
1167	!-- Store humidity gradient at the top boundary for possile Neumann
1168	!-- boundary condition
1169	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1170
1171	ENDIF
1172
1173	!
1174	!-- If required, compute initial salinity profile using the given salinity
1175	!-- gradients
1176	IF ( ocean ) THEN
1177
1178	i = 1
1179	gradient = 0.0
1180
1181	sa_vertical_gradient_level_ind(1) = nzt+1
1182	DO k = nzt, 0, -1
1183	IF ( i < 11 ) THEN
1184	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1185	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1186	gradient = sa_vertical_gradient(i) / 100.0
1187	sa_vertical_gradient_level_ind(i) = k + 1
1188	i = i + 1
1189	ENDIF
1190	ENDIF
1191	IF ( gradient /= 0.0 ) THEN
1192	IF ( k /= nzt ) THEN
1193	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1194	ELSE
1195	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1196	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1197	ENDIF
1198	ELSE
1199	sa_init(k) = sa_init(k+1)
1200	ENDIF
1201	ENDDO
1202
1203	ENDIF
1204
1205	!
1206	!-- If required compute the profile of leaf area density used in the plant
1207	!-- canopy model
1208	IF ( plant_canopy ) THEN
1209
1210	i = 1
1211	gradient = 0.0
1212
1213	IF ( .NOT. ocean ) THEN
1214
1215	lad(0) = lad_surface
1216
1217	lad_vertical_gradient_level_ind(1) = 0
1218	DO k = 1, pch_index
1219	IF ( i < 11 ) THEN
1220	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1221	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1222	gradient = lad_vertical_gradient(i)
1223	lad_vertical_gradient_level_ind(i) = k - 1
1224	i = i + 1
1225	ENDIF
1226	ENDIF
1227	IF ( gradient /= 0.0 ) THEN
1228	IF ( k /= 1 ) THEN
1229	lad(k) = lad(k-1) + dzu(k) * gradient
1230	ELSE
1231	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1232	ENDIF
1233	ELSE
1234	lad(k) = lad(k-1)
1235	ENDIF
1236	ENDDO
1237
1238	ENDIF
1239
1240	!
1241	!-- In case of no given leaf area density gradients, choose a vanishing
1242	!-- gradient
1243	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1244	lad_vertical_gradient_level(1) = 0.0
1245	ENDIF
1246
1247	ENDIF
1248
1249	ENDIF
1250
1251	!
1252	!-- Initialize large scale subsidence if required
1253	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1254	large_scale_subsidence = .TRUE.
1255	CALL init_w_subsidence
1256	END IF
1257
1258
1259
1260	!
1261	!-- Compute Coriolis parameter
1262	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1263	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1264
1265	!
1266	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1267	!-- set the reference temperature equal to the surface temperature.
1268	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1269
1270	!
1271	!-- Reference value has to be used in buoyancy terms
1272	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1273
1274	!
1275	!-- Sign of buoyancy/stability terms
1276	IF ( ocean ) atmos_ocean_sign = -1.0
1277
1278	!
1279	!-- Ocean version must use flux boundary conditions at the top
1280	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1281	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1282	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1283	ENDIF
1284
1285	!
1286	!-- In case of a given slope, compute the relevant quantities
1287	IF ( alpha_surface /= 0.0 ) THEN
1288	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1289	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1290	' ) must be < 90.0'
1291	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1292	ENDIF
1293	sloping_surface = .TRUE.
1294	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1295	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1296	ENDIF
1297
1298	!
1299	!-- Check time step and cfl_factor
1300	IF ( dt /= -1.0 ) THEN
1301	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1302	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1303	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1304	ENDIF
1305	dt_3d = dt
1306	dt_fixed = .TRUE.
1307	ENDIF
1308
1309	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1310	IF ( cfl_factor == -1.0 ) THEN
1311	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1312	cfl_factor = 0.8
1313	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1314	cfl_factor = 0.9
1315	ELSE
1316	cfl_factor = 0.9
1317	ENDIF
1318	ELSE
1319	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1320	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1321	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1322	ENDIF
1323	ENDIF
1324
1325	!
1326	!-- Store simulated time at begin
1327	simulated_time_at_begin = simulated_time
1328
1329	!
1330	!-- Store reference time for coupled runs and change the coupling flag,
1331	!-- if ...
1332	IF ( simulated_time == 0.0 ) THEN
1333	IF ( coupling_start_time == 0.0 ) THEN
1334	time_since_reference_point = 0.0
1335	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1336	run_coupled = .FALSE.
1337	ENDIF
1338	ENDIF
1339
1340	!
1341	!-- Set wind speed in the Galilei-transformed system
1342	IF ( galilei_transformation ) THEN
1343	IF ( use_ug_for_galilei_tr .AND. &
1344	ug_vertical_gradient_level(1) == 0.0 .AND. &
1345	vg_vertical_gradient_level(1) == 0.0 ) THEN
1346	u_gtrans = ug_surface * 0.6
1347	v_gtrans = vg_surface * 0.6
1348	ELSEIF ( use_ug_for_galilei_tr .AND. &
1349	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1350	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1351	' with galilei transformation'
1352	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1353	ELSEIF ( use_ug_for_galilei_tr .AND. &
1354	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1355	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1356	' with galilei transformation'
1357	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1358	ELSE
1359	message_string = 'variable translation speed used for galilei-' // &
1360	'transformation, which may cause & instabilities in stably ' // &
1361	'stratified regions'
1362	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1363	ENDIF
1364	ENDIF
1365
1366	!
1367	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1368	!-- fluxes have to be used in the diffusion-terms
1369	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1370
1371	!
1372	!-- Check boundary conditions and set internal variables:
1373	!-- Lateral boundary conditions
1374	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1375	bc_lr /= 'radiation/dirichlet' .AND. bc_lr /= 'dirichlet/neumann' &
1376	.AND. bc_lr /= 'neumann/dirichlet' ) THEN
1377	message_string = 'unknown boundary condition: bc_lr = "' // &
1378	TRIM( bc_lr ) // '"'
1379	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1380	ENDIF
1381	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1382	bc_ns /= 'radiation/dirichlet' .AND. bc_ns /= 'dirichlet/neumann' &
1383	.AND. bc_ns /= 'neumann/dirichlet' ) THEN
1384	message_string = 'unknown boundary condition: bc_ns = "' // &
1385	TRIM( bc_ns ) // '"'
1386	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1387	ENDIF
1388
1389	!
1390	!-- Internal variables used for speed optimization in if clauses
1391	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1392	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1393	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1394	IF ( bc_lr == 'dirichlet/neumann' ) bc_lr_dirneu = .TRUE.
1395	IF ( bc_lr == 'neumann/dirichlet' ) bc_lr_neudir = .TRUE.
1396	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1397	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1398	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1399	IF ( bc_ns == 'dirichlet/neumann' ) bc_ns_dirneu = .TRUE.
1400	IF ( bc_ns == 'neumann/dirichlet' ) bc_ns_neudir = .TRUE.
1401
1402	!
1403	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1404	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1405	!-- and tools do not work with non-cyclic boundary conditions.
1406	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1407	IF ( psolver /= 'multigrid' ) THEN
1408	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1409	'psolver = "' // TRIM( psolver ) // '"'
1410	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1411	ENDIF
1412	IF ( momentum_advec /= 'pw-scheme' .AND. &
1413	momentum_advec /= 'ws-scheme') THEN
1414	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1415	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1416	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1417	ENDIF
1418	IF ( scalar_advec /= 'pw-scheme' .AND. &
1419	scalar_advec /= 'ws-scheme' ) THEN
1420	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1421	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1422	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1423	ENDIF
1424	IF ( galilei_transformation ) THEN
1425	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1426	'galilei_transformation = .T.'
1427	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1428	ENDIF
1429	ENDIF
1430
1431	!
1432	!-- Bottom boundary condition for the turbulent Kinetic energy
1433	IF ( bc_e_b == 'neumann' ) THEN
1434	ibc_e_b = 1
1435	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1436	ibc_e_b = 2
1437	IF ( prandtl_layer ) THEN
1438	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1439	TRIM( bc_e_b ) // '"'
1440	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1441	ENDIF
1442	IF ( .NOT. prandtl_layer ) THEN
1443	bc_e_b = 'neumann'
1444	ibc_e_b = 1
1445	message_string = 'boundary condition bc_e_b changed to "' // &
1446	TRIM( bc_e_b ) // '"'
1447	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1448	ENDIF
1449	ELSE
1450	message_string = 'unknown boundary condition: bc_e_b = "' // &
1451	TRIM( bc_e_b ) // '"'
1452	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1453	ENDIF
1454
1455	!
1456	!-- Boundary conditions for perturbation pressure
1457	IF ( bc_p_b == 'dirichlet' ) THEN
1458	ibc_p_b = 0
1459	ELSEIF ( bc_p_b == 'neumann' ) THEN
1460	ibc_p_b = 1
1461	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1462	ibc_p_b = 2
1463	ELSE
1464	message_string = 'unknown boundary condition: bc_p_b = "' // &
1465	TRIM( bc_p_b ) // '"'
1466	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1467	ENDIF
1468	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1469	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1470	'" not allowed with prandtl_layer = .FALSE.'
1471	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1472	ENDIF
1473	IF ( bc_p_t == 'dirichlet' ) THEN
1474	ibc_p_t = 0
1475	ELSEIF ( bc_p_t == 'neumann' ) THEN
1476	ibc_p_t = 1
1477	ELSE
1478	message_string = 'unknown boundary condition: bc_p_t = "' // &
1479	TRIM( bc_p_t ) // '"'
1480	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1481	ENDIF
1482
1483	!
1484	!-- Boundary conditions for potential temperature
1485	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1486	ibc_pt_b = 2
1487	ELSE
1488	IF ( bc_pt_b == 'dirichlet' ) THEN
1489	ibc_pt_b = 0
1490	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1491	ibc_pt_b = 1
1492	ELSE
1493	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1494	TRIM( bc_pt_b ) // '"'
1495	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1496	ENDIF
1497	ENDIF
1498
1499	IF ( bc_pt_t == 'dirichlet' ) THEN
1500	ibc_pt_t = 0
1501	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1502	ibc_pt_t = 1
1503	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1504	ibc_pt_t = 2
1505	ELSE
1506	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1507	TRIM( bc_pt_t ) // '"'
1508	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1509	ENDIF
1510
1511	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1512	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1513
1514	IF ( neutral ) THEN
1515
1516	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1517	THEN
1518	message_string = 'heatflux must not be set for pure neutral flow'
1519	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1520	ENDIF
1521
1522	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1523	THEN
1524	message_string = 'heatflux must not be set for pure neutral flow'
1525	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1526	ENDIF
1527
1528	ENDIF
1529
1530	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1531	top_momentumflux_v /= 9999999.9 ) THEN
1532	constant_top_momentumflux = .TRUE.
1533	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1534	top_momentumflux_v == 9999999.9 ) ) THEN
1535	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1536	'must be set'
1537	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1538	ENDIF
1539
1540	!
1541	!-- A given surface temperature implies Dirichlet boundary condition for
1542	!-- temperature. In this case specification of a constant heat flux is
1543	!-- forbidden.
1544	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1545	surface_heatflux /= 0.0 ) THEN
1546	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1547	'& is not allowed with constant_heatflux = .TRUE.'
1548	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1549	ENDIF
1550	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1551	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1552	'wed with pt_surface_initial_change (/=0) = ', &
1553	pt_surface_initial_change
1554	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1555	ENDIF
1556
1557	!
1558	!-- A given temperature at the top implies Dirichlet boundary condition for
1559	!-- temperature. In this case specification of a constant heat flux is
1560	!-- forbidden.
1561	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1562	top_heatflux /= 0.0 ) THEN
1563	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1564	'" is not allowed with constant_top_heatflux = .TRUE.'
1565	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1566	ENDIF
1567
1568	!
1569	!-- Boundary conditions for salinity
1570	IF ( ocean ) THEN
1571	IF ( bc_sa_t == 'dirichlet' ) THEN
1572	ibc_sa_t = 0
1573	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1574	ibc_sa_t = 1
1575	ELSE
1576	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1577	TRIM( bc_sa_t ) // '"'
1578	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1579	ENDIF
1580
1581	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1582	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1583	message_string = 'boundary condition: bc_sa_t = "' // &
1584	TRIM( bc_sa_t ) // '" requires to set ' // &
1585	'top_salinityflux'
1586	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1587	ENDIF
1588
1589	!
1590	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1591	!-- salinity. In this case specification of a constant salinity flux is
1592	!-- forbidden.
1593	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1594	top_salinityflux /= 0.0 ) THEN
1595	message_string = 'boundary condition: bc_sa_t = "' // &
1596	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1597	'constant_top_salinityflux = .TRUE.'
1598	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1599	ENDIF
1600
1601	ENDIF
1602
1603	!
1604	!-- In case of humidity or passive scalar, set boundary conditions for total
1605	!-- water content / scalar
1606	IF ( humidity .OR. passive_scalar ) THEN
1607	IF ( humidity ) THEN
1608	sq = 'q'
1609	ELSE
1610	sq = 's'
1611	ENDIF
1612	IF ( bc_q_b == 'dirichlet' ) THEN
1613	ibc_q_b = 0
1614	ELSEIF ( bc_q_b == 'neumann' ) THEN
1615	ibc_q_b = 1
1616	ELSE
1617	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1618	'_b ="' // TRIM( bc_q_b ) // '"'
1619	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1620	ENDIF
1621	IF ( bc_q_t == 'dirichlet' ) THEN
1622	ibc_q_t = 0
1623	ELSEIF ( bc_q_t == 'neumann' ) THEN
1624	ibc_q_t = 1
1625	ELSE
1626	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1627	'_t ="' // TRIM( bc_q_t ) // '"'
1628	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1629	ENDIF
1630
1631	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1632
1633	!
1634	!-- A given surface humidity implies Dirichlet boundary condition for
1635	!-- humidity. In this case specification of a constant water flux is
1636	!-- forbidden.
1637	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1638	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1639	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1640	'th prescribed surface flux'
1641	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1642	ENDIF
1643	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1644	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1645	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1646	q_surface_initial_change
1647	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1648	ENDIF
1649
1650	ENDIF
1651
1652	!
1653	!-- Boundary conditions for horizontal components of wind speed
1654	IF ( bc_uv_b == 'dirichlet' ) THEN
1655	ibc_uv_b = 0
1656	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1657	ibc_uv_b = 1
1658	IF ( prandtl_layer ) THEN
1659	message_string = 'boundary condition: bc_uv_b = "' // &
1660	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1661	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1662	ENDIF
1663	ELSE
1664	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1665	TRIM( bc_uv_b ) // '"'
1666	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1667	ENDIF
1668	!
1669	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1670	!-- assigned with the u and v values of the ocean surface
1671	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1672	ibc_uv_b = 2
1673	ENDIF
1674
1675	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1676	bc_uv_t = 'neumann'
1677	ibc_uv_t = 1
1678	ELSE
1679	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1680	ibc_uv_t = 0
1681	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1682	!
1683	!-- Velocities for the initial u,v-profiles are set zero at the top
1684	!-- in case of dirichlet_0 conditions
1685	u_init(nzt+1) = 0.0
1686	v_init(nzt+1) = 0.0
1687	ENDIF
1688	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1689	ibc_uv_t = 1
1690	ELSE
1691	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1692	TRIM( bc_uv_t ) // '"'
1693	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1694	ENDIF
1695	ENDIF
1696
1697	!
1698	!-- Compute and check, respectively, the Rayleigh Damping parameter
1699	IF ( rayleigh_damping_factor == -1.0 ) THEN
1700	rayleigh_damping_factor = 0.0
1701	ELSE
1702	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1703	THEN
1704	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1705	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1706	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1707	ENDIF
1708	ENDIF
1709
1710	IF ( rayleigh_damping_height == -1.0 ) THEN
1711	IF ( .NOT. ocean ) THEN
1712	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1713	ELSE
1714	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1715	ENDIF
1716	ELSE
1717	IF ( .NOT. ocean ) THEN
1718	IF ( rayleigh_damping_height < 0.0 .OR. &
1719	rayleigh_damping_height > zu(nzt) ) THEN
1720	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1721	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1722	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1723	ENDIF
1724	ELSE
1725	IF ( rayleigh_damping_height > 0.0 .OR. &
1726	rayleigh_damping_height < zu(nzb) ) THEN
1727	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1728	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1729	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1730	ENDIF
1731	ENDIF
1732	ENDIF
1733
1734	!
1735	!-- Check number of chosen statistic regions. More than 10 regions are not
1736	!-- allowed, because so far no more than 10 corresponding output files can
1737	!-- be opened (cf. check_open)
1738	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1739	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1740	statistic_regions+1, ' but only 10 regions are allowed'
1741	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1742	ENDIF
1743	IF ( normalizing_region > statistic_regions .OR. &
1744	normalizing_region < 0) THEN
1745	WRITE ( message_string, * ) 'normalizing_region = ', &
1746	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1747	' (value of statistic_regions)'
1748	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1749	ENDIF
1750
1751	!
1752	!-- Check the interval for sorting particles.
1753	!-- Using particles as cloud droplets requires sorting after each timestep.
1754	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1755	dt_sort_particles = 0.0
1756	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1757	'_droplets = .TRUE.'
1758	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1759	ENDIF
1760
1761	!
1762	!-- Set the default intervals for data output, if necessary
1763	!-- NOTE: dt_dosp has already been set in package_parin
1764	IF ( dt_data_output /= 9999999.9 ) THEN
1765	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1766	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1767	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1768	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1769	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1770	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1771	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1772	DO mid = 1, max_masks
1773	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1774	ENDDO
1775	ENDIF
1776
1777	!
1778	!-- Set the default skip time intervals for data output, if necessary
1779	IF ( skip_time_dopr == 9999999.9 ) &
1780	skip_time_dopr = skip_time_data_output
1781	IF ( skip_time_dosp == 9999999.9 ) &
1782	skip_time_dosp = skip_time_data_output
1783	IF ( skip_time_do2d_xy == 9999999.9 ) &
1784	skip_time_do2d_xy = skip_time_data_output
1785	IF ( skip_time_do2d_xz == 9999999.9 ) &
1786	skip_time_do2d_xz = skip_time_data_output
1787	IF ( skip_time_do2d_yz == 9999999.9 ) &
1788	skip_time_do2d_yz = skip_time_data_output
1789	IF ( skip_time_do3d == 9999999.9 ) &
1790	skip_time_do3d = skip_time_data_output
1791	IF ( skip_time_data_output_av == 9999999.9 ) &
1792	skip_time_data_output_av = skip_time_data_output
1793	DO mid = 1, max_masks
1794	IF ( skip_time_domask(mid) == 9999999.9 ) &
1795	skip_time_domask(mid) = skip_time_data_output
1796	ENDDO
1797
1798	!
1799	!-- Check the average intervals (first for 3d-data, then for profiles and
1800	!-- spectra)
1801	IF ( averaging_interval > dt_data_output_av ) THEN
1802	WRITE( message_string, * ) 'averaging_interval = ', &
1803	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1804	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1805	ENDIF
1806
1807	IF ( averaging_interval_pr == 9999999.9 ) THEN
1808	averaging_interval_pr = averaging_interval
1809	ENDIF
1810
1811	IF ( averaging_interval_pr > dt_dopr ) THEN
1812	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1813	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1814	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1815	ENDIF
1816
1817	IF ( averaging_interval_sp == 9999999.9 ) THEN
1818	averaging_interval_sp = averaging_interval
1819	ENDIF
1820
1821	IF ( averaging_interval_sp > dt_dosp ) THEN
1822	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1823	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1824	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1825	ENDIF
1826
1827	!
1828	!-- Set the default interval for profiles entering the temporal average
1829	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1830	dt_averaging_input_pr = dt_averaging_input
1831	ENDIF
1832
1833	!
1834	!-- Set the default interval for the output of timeseries to a reasonable
1835	!-- value (tries to minimize the number of calls of flow_statistics)
1836	IF ( dt_dots == 9999999.9 ) THEN
1837	IF ( averaging_interval_pr == 0.0 ) THEN
1838	dt_dots = MIN( dt_run_control, dt_dopr )
1839	ELSE
1840	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1841	ENDIF
1842	ENDIF
1843
1844	!
1845	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1846	IF ( dt_averaging_input > averaging_interval ) THEN
1847	WRITE( message_string, * ) 'dt_averaging_input = ', &
1848	dt_averaging_input, ' must be <= averaging_interval = ', &
1849	averaging_interval
1850	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1851	ENDIF
1852
1853	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1854	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1855	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1856	averaging_interval_pr
1857	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1858	ENDIF
1859
1860	!
1861	!-- Set the default value for the integration interval of precipitation amount
1862	IF ( precipitation ) THEN
1863	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1864	precipitation_amount_interval = dt_do2d_xy
1865	ELSE
1866	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1867	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1868	precipitation_amount_interval, ' must not be larger than ', &
1869	'dt_do2d_xy = ', dt_do2d_xy
1870	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1871	ENDIF
1872	ENDIF
1873	ENDIF
1874
1875	!
1876	!-- Determine the number of output profiles and check whether they are
1877	!-- permissible
1878	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1879
1880	dopr_n = dopr_n + 1
1881	i = dopr_n
1882
1883	!
1884	!-- Determine internal profile number (for hom, homs)
1885	!-- and store height levels
1886	SELECT CASE ( TRIM( data_output_pr(i) ) )
1887
1888	CASE ( 'u', '#u' )
1889	dopr_index(i) = 1
1890	dopr_unit(i) = 'm/s'
1891	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1892	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1893	dopr_initial_index(i) = 5
1894	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1895	data_output_pr(i) = data_output_pr(i)(2:)
1896	ENDIF
1897
1898	CASE ( 'v', '#v' )
1899	dopr_index(i) = 2
1900	dopr_unit(i) = 'm/s'
1901	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1902	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1903	dopr_initial_index(i) = 6
1904	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1905	data_output_pr(i) = data_output_pr(i)(2:)
1906	ENDIF
1907
1908	CASE ( 'w' )
1909	dopr_index(i) = 3
1910	dopr_unit(i) = 'm/s'
1911	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1912
1913	CASE ( 'pt', '#pt' )
1914	IF ( .NOT. cloud_physics ) THEN
1915	dopr_index(i) = 4
1916	dopr_unit(i) = 'K'
1917	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1918	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1919	dopr_initial_index(i) = 7
1920	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1921	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1922	data_output_pr(i) = data_output_pr(i)(2:)
1923	ENDIF
1924	ELSE
1925	dopr_index(i) = 43
1926	dopr_unit(i) = 'K'
1927	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1928	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1929	dopr_initial_index(i) = 28
1930	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1931	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1932	data_output_pr(i) = data_output_pr(i)(2:)
1933	ENDIF
1934	ENDIF
1935
1936	CASE ( 'e' )
1937	dopr_index(i) = 8
1938	dopr_unit(i) = 'm2/s2'
1939	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1940	hom(nzb,2,8,:) = 0.0
1941
1942	CASE ( 'km', '#km' )
1943	dopr_index(i) = 9
1944	dopr_unit(i) = 'm2/s'
1945	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1946	hom(nzb,2,9,:) = 0.0
1947	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1948	dopr_initial_index(i) = 23
1949	hom(:,2,23,:) = hom(:,2,9,:)
1950	data_output_pr(i) = data_output_pr(i)(2:)
1951	ENDIF
1952
1953	CASE ( 'kh', '#kh' )
1954	dopr_index(i) = 10
1955	dopr_unit(i) = 'm2/s'
1956	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1957	hom(nzb,2,10,:) = 0.0
1958	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1959	dopr_initial_index(i) = 24
1960	hom(:,2,24,:) = hom(:,2,10,:)
1961	data_output_pr(i) = data_output_pr(i)(2:)
1962	ENDIF
1963
1964	CASE ( 'l', '#l' )
1965	dopr_index(i) = 11
1966	dopr_unit(i) = 'm'
1967	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1968	hom(nzb,2,11,:) = 0.0
1969	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1970	dopr_initial_index(i) = 25
1971	hom(:,2,25,:) = hom(:,2,11,:)
1972	data_output_pr(i) = data_output_pr(i)(2:)
1973	ENDIF
1974
1975	CASE ( 'w"u"' )
1976	dopr_index(i) = 12
1977	dopr_unit(i) = 'm2/s2'
1978	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1979	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1980
1981	CASE ( 'wu' )
1982	dopr_index(i) = 13
1983	dopr_unit(i) = 'm2/s2'
1984	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1985
1986	CASE ( 'w"v"' )
1987	dopr_index(i) = 14
1988	dopr_unit(i) = 'm2/s2'
1989	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1990	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1991
1992	CASE ( 'wv' )
1993	dopr_index(i) = 15
1994	dopr_unit(i) = 'm2/s2'
1995	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1996
1997	CASE ( 'w"pt"' )
1998	dopr_index(i) = 16
1999	dopr_unit(i) = 'K m/s'
2000	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2001
2002	CASE ( 'wpt' )
2003	dopr_index(i) = 17
2004	dopr_unit(i) = 'K m/s'
2005	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2006
2007	CASE ( 'wpt' )
2008	dopr_index(i) = 18
2009	dopr_unit(i) = 'K m/s'
2010	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2011
2012	CASE ( 'wu' )
2013	dopr_index(i) = 19
2014	dopr_unit(i) = 'm2/s2'
2015	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2016	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2017
2018	CASE ( 'wv' )
2019	dopr_index(i) = 20
2020	dopr_unit(i) = 'm2/s2'
2021	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2022	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2023
2024	CASE ( 'wptBC' )
2025	dopr_index(i) = 21
2026	dopr_unit(i) = 'K m/s'
2027	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2028
2029	CASE ( 'wptBC' )
2030	dopr_index(i) = 22
2031	dopr_unit(i) = 'K m/s'
2032	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2033
2034	CASE ( 'sa', '#sa' )
2035	IF ( .NOT. ocean ) THEN
2036	message_string = 'data_output_pr = ' // &
2037	TRIM( data_output_pr(i) ) // ' is not imp' // &
2038	'lemented for ocean = .FALSE.'
2039	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2040	ELSE
2041	dopr_index(i) = 23
2042	dopr_unit(i) = 'psu'
2043	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2044	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2045	dopr_initial_index(i) = 26
2046	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2047	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2048	data_output_pr(i) = data_output_pr(i)(2:)
2049	ENDIF
2050	ENDIF
2051
2052	CASE ( 'u*2' )
2053	dopr_index(i) = 30
2054	dopr_unit(i) = 'm2/s2'
2055	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2056
2057	CASE ( 'v*2' )
2058	dopr_index(i) = 31
2059	dopr_unit(i) = 'm2/s2'
2060	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2061
2062	CASE ( 'w*2' )
2063	dopr_index(i) = 32
2064	dopr_unit(i) = 'm2/s2'
2065	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2066
2067	CASE ( 'pt*2' )
2068	dopr_index(i) = 33
2069	dopr_unit(i) = 'K2'
2070	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2071
2072	CASE ( 'e*' )
2073	dopr_index(i) = 34
2074	dopr_unit(i) = 'm2/s2'
2075	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2076
2077	CASE ( 'w2pt' )
2078	dopr_index(i) = 35
2079	dopr_unit(i) = 'K m2/s2'
2080	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2081
2082	CASE ( 'wpt2' )
2083	dopr_index(i) = 36
2084	dopr_unit(i) = 'K2 m/s'
2085	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2086
2087	CASE ( 'we' )
2088	dopr_index(i) = 37
2089	dopr_unit(i) = 'm3/s3'
2090	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2091
2092	CASE ( 'w*3' )
2093	dopr_index(i) = 38
2094	dopr_unit(i) = 'm3/s3'
2095	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2096
2097	CASE ( 'Sw' )
2098	dopr_index(i) = 39
2099	dopr_unit(i) = 'none'
2100	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2101
2102	CASE ( 'p' )
2103	dopr_index(i) = 40
2104	dopr_unit(i) = 'Pa'
2105	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2106
2107	CASE ( 'q', '#q' )
2108	IF ( .NOT. humidity ) THEN
2109	message_string = 'data_output_pr = ' // &
2110	TRIM( data_output_pr(i) ) // ' is not imp' // &
2111	'lemented for humidity = .FALSE.'
2112	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2113	ELSE
2114	dopr_index(i) = 41
2115	dopr_unit(i) = 'kg/kg'
2116	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2117	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2118	dopr_initial_index(i) = 26
2119	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2120	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2121	data_output_pr(i) = data_output_pr(i)(2:)
2122	ENDIF
2123	ENDIF
2124
2125	CASE ( 's', '#s' )
2126	IF ( .NOT. passive_scalar ) THEN
2127	message_string = 'data_output_pr = ' // &
2128	TRIM( data_output_pr(i) ) // ' is not imp' // &
2129	'lemented for passive_scalar = .FALSE.'
2130	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2131	ELSE
2132	dopr_index(i) = 41
2133	dopr_unit(i) = 'kg/m3'
2134	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2135	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2136	dopr_initial_index(i) = 26
2137	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2138	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2139	data_output_pr(i) = data_output_pr(i)(2:)
2140	ENDIF
2141	ENDIF
2142
2143	CASE ( 'qv', '#qv' )
2144	IF ( .NOT. cloud_physics ) THEN
2145	dopr_index(i) = 41
2146	dopr_unit(i) = 'kg/kg'
2147	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2148	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2149	dopr_initial_index(i) = 26
2150	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2151	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2152	data_output_pr(i) = data_output_pr(i)(2:)
2153	ENDIF
2154	ELSE
2155	dopr_index(i) = 42
2156	dopr_unit(i) = 'kg/kg'
2157	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2158	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2159	dopr_initial_index(i) = 27
2160	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2161	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2162	data_output_pr(i) = data_output_pr(i)(2:)
2163	ENDIF
2164	ENDIF
2165
2166	CASE ( 'lpt', '#lpt' )
2167	IF ( .NOT. cloud_physics ) THEN
2168	message_string = 'data_output_pr = ' // &
2169	TRIM( data_output_pr(i) ) // ' is not imp' // &
2170	'lemented for cloud_physics = .FALSE.'
2171	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2172	ELSE
2173	dopr_index(i) = 4
2174	dopr_unit(i) = 'K'
2175	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2176	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2177	dopr_initial_index(i) = 7
2178	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2179	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2180	data_output_pr(i) = data_output_pr(i)(2:)
2181	ENDIF
2182	ENDIF
2183
2184	CASE ( 'vpt', '#vpt' )
2185	dopr_index(i) = 44
2186	dopr_unit(i) = 'K'
2187	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2188	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2189	dopr_initial_index(i) = 29
2190	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2191	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2192	data_output_pr(i) = data_output_pr(i)(2:)
2193	ENDIF
2194
2195	CASE ( 'w"vpt"' )
2196	dopr_index(i) = 45
2197	dopr_unit(i) = 'K m/s'
2198	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2199
2200	CASE ( 'wvpt' )
2201	dopr_index(i) = 46
2202	dopr_unit(i) = 'K m/s'
2203	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2204
2205	CASE ( 'wvpt' )
2206	dopr_index(i) = 47
2207	dopr_unit(i) = 'K m/s'
2208	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2209
2210	CASE ( 'w"q"' )
2211	IF ( .NOT. humidity ) THEN
2212	message_string = 'data_output_pr = ' // &
2213	TRIM( data_output_pr(i) ) // ' is not imp' // &
2214	'lemented for humidity = .FALSE.'
2215	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2216	ELSE
2217	dopr_index(i) = 48
2218	dopr_unit(i) = 'kg/kg m/s'
2219	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2220	ENDIF
2221
2222	CASE ( 'wq' )
2223	IF ( .NOT. humidity ) THEN
2224	message_string = 'data_output_pr = ' // &
2225	TRIM( data_output_pr(i) ) // ' is not imp' // &
2226	'lemented for humidity = .FALSE.'
2227	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2228	ELSE
2229	dopr_index(i) = 49
2230	dopr_unit(i) = 'kg/kg m/s'
2231	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2232	ENDIF
2233
2234	CASE ( 'wq' )
2235	IF ( .NOT. humidity ) THEN
2236	message_string = 'data_output_pr = ' // &
2237	TRIM( data_output_pr(i) ) // ' is not imp' // &
2238	'lemented for humidity = .FALSE.'
2239	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2240	ELSE
2241	dopr_index(i) = 50
2242	dopr_unit(i) = 'kg/kg m/s'
2243	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2244	ENDIF
2245
2246	CASE ( 'w"s"' )
2247	IF ( .NOT. passive_scalar ) THEN
2248	message_string = 'data_output_pr = ' // &
2249	TRIM( data_output_pr(i) ) // ' is not imp' // &
2250	'lemented for passive_scalar = .FALSE.'
2251	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2252	ELSE
2253	dopr_index(i) = 48
2254	dopr_unit(i) = 'kg/m3 m/s'
2255	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2256	ENDIF
2257
2258	CASE ( 'ws' )
2259	IF ( .NOT. passive_scalar ) THEN
2260	message_string = 'data_output_pr = ' // &
2261	TRIM( data_output_pr(i) ) // ' is not imp' // &
2262	'lemented for passive_scalar = .FALSE.'
2263	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2264	ELSE
2265	dopr_index(i) = 49
2266	dopr_unit(i) = 'kg/m3 m/s'
2267	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2268	ENDIF
2269
2270	CASE ( 'ws' )
2271	IF ( .NOT. passive_scalar ) THEN
2272	message_string = 'data_output_pr = ' // &
2273	TRIM( data_output_pr(i) ) // ' is not imp' // &
2274	'lemented for passive_scalar = .FALSE.'
2275	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2276	ELSE
2277	dopr_index(i) = 50
2278	dopr_unit(i) = 'kg/m3 m/s'
2279	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2280	ENDIF
2281
2282	CASE ( 'w"qv"' )
2283	IF ( humidity .AND. .NOT. cloud_physics ) &
2284	THEN
2285	dopr_index(i) = 48
2286	dopr_unit(i) = 'kg/kg m/s'
2287	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2288	ELSEIF( humidity .AND. cloud_physics ) THEN
2289	dopr_index(i) = 51
2290	dopr_unit(i) = 'kg/kg m/s'
2291	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2292	ELSE
2293	message_string = 'data_output_pr = ' // &
2294	TRIM( data_output_pr(i) ) // ' is not imp' // &
2295	'lemented for cloud_physics = .FALSE. an&' // &
2296	'd humidity = .FALSE.'
2297	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2298	ENDIF
2299
2300	CASE ( 'wqv' )
2301	IF ( humidity .AND. .NOT. cloud_physics ) &
2302	THEN
2303	dopr_index(i) = 49
2304	dopr_unit(i) = 'kg/kg m/s'
2305	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2306	ELSEIF( humidity .AND. cloud_physics ) THEN
2307	dopr_index(i) = 52
2308	dopr_unit(i) = 'kg/kg m/s'
2309	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2310	ELSE
2311	message_string = 'data_output_pr = ' // &
2312	TRIM( data_output_pr(i) ) // ' is not imp' // &
2313	'lemented for cloud_physics = .FALSE. an&' // &
2314	'd humidity = .FALSE.'
2315	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2316	ENDIF
2317
2318	CASE ( 'wqv' )
2319	IF ( humidity .AND. .NOT. cloud_physics ) &
2320	THEN
2321	dopr_index(i) = 50
2322	dopr_unit(i) = 'kg/kg m/s'
2323	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2324	ELSEIF( humidity .AND. cloud_physics ) THEN
2325	dopr_index(i) = 53
2326	dopr_unit(i) = 'kg/kg m/s'
2327	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2328	ELSE
2329	message_string = 'data_output_pr = ' // &
2330	TRIM( data_output_pr(i) ) // ' is not imp' // &
2331	'lemented for cloud_physics = .FALSE. an&' // &
2332	'd humidity = .FALSE.'
2333	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2334	ENDIF
2335
2336	CASE ( 'ql' )
2337	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2338	message_string = 'data_output_pr = ' // &
2339	TRIM( data_output_pr(i) ) // ' is not imp' // &
2340	'lemented for cloud_physics = .FALSE. or' // &
2341	'&cloud_droplets = .FALSE.'
2342	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2343	ELSE
2344	dopr_index(i) = 54
2345	dopr_unit(i) = 'kg/kg'
2346	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2347	ENDIF
2348
2349	CASE ( 'wuu*:dz' )
2350	dopr_index(i) = 55
2351	dopr_unit(i) = 'm2/s3'
2352	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2353
2354	CASE ( 'wp:dz' )
2355	dopr_index(i) = 56
2356	dopr_unit(i) = 'm2/s3'
2357	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2358
2359	CASE ( 'w"e:dz' )
2360	dopr_index(i) = 57
2361	dopr_unit(i) = 'm2/s3'
2362	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2363
2364
2365	CASE ( 'u"pt"' )
2366	dopr_index(i) = 58
2367	dopr_unit(i) = 'K m/s'
2368	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2369
2370	CASE ( 'upt' )
2371	dopr_index(i) = 59
2372	dopr_unit(i) = 'K m/s'
2373	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2374
2375	CASE ( 'upt_t' )
2376	dopr_index(i) = 60
2377	dopr_unit(i) = 'K m/s'
2378	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2379
2380	CASE ( 'v"pt"' )
2381	dopr_index(i) = 61
2382	dopr_unit(i) = 'K m/s'
2383	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2384
2385	CASE ( 'vpt' )
2386	dopr_index(i) = 62
2387	dopr_unit(i) = 'K m/s'
2388	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2389
2390	CASE ( 'vpt_t' )
2391	dopr_index(i) = 63
2392	dopr_unit(i) = 'K m/s'
2393	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2394
2395	CASE ( 'rho' )
2396	IF ( .NOT. ocean ) THEN
2397	message_string = 'data_output_pr = ' // &
2398	TRIM( data_output_pr(i) ) // ' is not imp' // &
2399	'lemented for ocean = .FALSE.'
2400	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2401	ELSE
2402	dopr_index(i) = 64
2403	dopr_unit(i) = 'kg/m3'
2404	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2405	ENDIF
2406
2407	CASE ( 'w"sa"' )
2408	IF ( .NOT. ocean ) THEN
2409	message_string = 'data_output_pr = ' // &
2410	TRIM( data_output_pr(i) ) // ' is not imp' // &
2411	'lemented for ocean = .FALSE.'
2412	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2413	ELSE
2414	dopr_index(i) = 65
2415	dopr_unit(i) = 'psu m/s'
2416	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2417	ENDIF
2418
2419	CASE ( 'wsa' )
2420	IF ( .NOT. ocean ) THEN
2421	message_string = 'data_output_pr = ' // &
2422	TRIM( data_output_pr(i) ) // ' is not imp' // &
2423	'lemented for ocean = .FALSE.'
2424	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2425	ELSE
2426	dopr_index(i) = 66
2427	dopr_unit(i) = 'psu m/s'
2428	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2429	ENDIF
2430
2431	CASE ( 'wsa' )
2432	IF ( .NOT. ocean ) THEN
2433	message_string = 'data_output_pr = ' // &
2434	TRIM( data_output_pr(i) ) // ' is not imp' // &
2435	'lemented for ocean = .FALSE.'
2436	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2437	ELSE
2438	dopr_index(i) = 67
2439	dopr_unit(i) = 'psu m/s'
2440	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2441	ENDIF
2442
2443	CASE ( 'wp' )
2444	dopr_index(i) = 68
2445	dopr_unit(i) = 'm3/s3'
2446	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2447
2448	CASE ( 'w"e' )
2449	dopr_index(i) = 69
2450	dopr_unit(i) = 'm3/s3'
2451	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2452
2453	CASE ( 'q*2' )
2454	IF ( .NOT. humidity ) THEN
2455	message_string = 'data_output_pr = ' // &
2456	TRIM( data_output_pr(i) ) // ' is not imp' // &
2457	'lemented for humidity = .FALSE.'
2458	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2459	ELSE
2460	dopr_index(i) = 70
2461	dopr_unit(i) = 'kg2/kg2'
2462	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2463	ENDIF
2464
2465	CASE ( 'prho' )
2466	IF ( .NOT. ocean ) THEN
2467	message_string = 'data_output_pr = ' // &
2468	TRIM( data_output_pr(i) ) // ' is not imp' // &
2469	'lemented for ocean = .FALSE.'
2470	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2471	ELSE
2472	dopr_index(i) = 71
2473	dopr_unit(i) = 'kg/m3'
2474	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2475	ENDIF
2476
2477	CASE ( 'hyp' )
2478	dopr_index(i) = 72
2479	dopr_unit(i) = 'dbar'
2480	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2481
2482	CASE DEFAULT
2483
2484	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2485
2486	IF ( unit == 'illegal' ) THEN
2487	IF ( data_output_pr_user(1) /= ' ' ) THEN
2488	message_string = 'illegal value for data_output_pr or ' // &
2489	'data_output_pr_user = "' // &
2490	TRIM( data_output_pr(i) ) // '"'
2491	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2492	ELSE
2493	message_string = 'illegal value for data_output_pr = "' // &
2494	TRIM( data_output_pr(i) ) // '"'
2495	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2496	ENDIF
2497	ENDIF
2498
2499	END SELECT
2500
2501	ENDDO
2502
2503
2504	!
2505	!-- Append user-defined data output variables to the standard data output
2506	IF ( data_output_user(1) /= ' ' ) THEN
2507	i = 1
2508	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2509	i = i + 1
2510	ENDDO
2511	j = 1
2512	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2513	IF ( i > 100 ) THEN
2514	message_string = 'number of output quantitities given by data' // &
2515	'_output and data_output_user exceeds the limit of 100'
2516	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2517	ENDIF
2518	data_output(i) = data_output_user(j)
2519	i = i + 1
2520	j = j + 1
2521	ENDDO
2522	ENDIF
2523
2524	!
2525	!-- Check and set steering parameters for 2d/3d data output and averaging
2526	i = 1
2527	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2528	!
2529	!-- Check for data averaging
2530	ilen = LEN_TRIM( data_output(i) )
2531	j = 0 ! no data averaging
2532	IF ( ilen > 3 ) THEN
2533	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2534	j = 1 ! data averaging
2535	data_output(i) = data_output(i)(1:ilen-3)
2536	ENDIF
2537	ENDIF
2538	!
2539	!-- Check for cross section or volume data
2540	ilen = LEN_TRIM( data_output(i) )
2541	k = 0 ! 3d data
2542	var = data_output(i)(1:ilen)
2543	IF ( ilen > 3 ) THEN
2544	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2545	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2546	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2547	k = 1 ! 2d data
2548	var = data_output(i)(1:ilen-3)
2549	ENDIF
2550	ENDIF
2551	!
2552	!-- Check for allowed value and set units
2553	SELECT CASE ( TRIM( var ) )
2554
2555	CASE ( 'e' )
2556	IF ( constant_diffusion ) THEN
2557	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2558	'res constant_diffusion = .FALSE.'
2559	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2560	ENDIF
2561	unit = 'm2/s2'
2562
2563	CASE ( 'lpt' )
2564	IF ( .NOT. cloud_physics ) THEN
2565	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2566	'res cloud_physics = .TRUE.'
2567	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2568	ENDIF
2569	unit = 'K'
2570
2571	CASE ( 'pc', 'pr' )
2572	IF ( .NOT. particle_advection ) THEN
2573	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2574	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2575	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2576	ENDIF
2577	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2578	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2579
2580	CASE ( 'q', 'vpt' )
2581	IF ( .NOT. humidity ) THEN
2582	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2583	'res humidity = .TRUE.'
2584	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2585	ENDIF
2586	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2587	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2588
2589	CASE ( 'ql' )
2590	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2591	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2592	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2593	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2594	ENDIF
2595	unit = 'kg/kg'
2596
2597	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2598	IF ( .NOT. cloud_droplets ) THEN
2599	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2600	'res cloud_droplets = .TRUE.'
2601	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2602	ENDIF
2603	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2604	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2605	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2606
2607	CASE ( 'qv' )
2608	IF ( .NOT. cloud_physics ) THEN
2609	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2610	'res cloud_physics = .TRUE.'
2611	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2612	ENDIF
2613	unit = 'kg/kg'
2614
2615	CASE ( 'rho' )
2616	IF ( .NOT. ocean ) THEN
2617	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2618	'res ocean = .TRUE.'
2619	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2620	ENDIF
2621	unit = 'kg/m3'
2622
2623	CASE ( 's' )
2624	IF ( .NOT. passive_scalar ) THEN
2625	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2626	'res passive_scalar = .TRUE.'
2627	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2628	ENDIF
2629	unit = 'conc'
2630
2631	CASE ( 'sa' )
2632	IF ( .NOT. ocean ) THEN
2633	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2634	'res ocean = .TRUE.'
2635	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2636	ENDIF
2637	unit = 'psu'
2638
2639	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2640	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2641	message_string = 'illegal value for data_output: "' // &
2642	TRIM( var ) // '" & only 2d-horizontal ' // &
2643	'cross sections are allowed for this value'
2644	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2645	ENDIF
2646	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2647	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2648	'res cloud_physics = .TRUE.'
2649	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2650	ENDIF
2651	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2652	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2653	'res precipitation = .TRUE.'
2654	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2655	ENDIF
2656	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2657	message_string = 'temporal averaging of precipitation ' // &
2658	'amount "' // TRIM( var ) // '" is not possible'
2659	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2660	ENDIF
2661	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2662	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2663	'res precipitation = .TRUE.'
2664	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2665	ENDIF
2666	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2667	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2668	'res humidity = .TRUE.'
2669	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2670	ENDIF
2671
2672	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2673	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2674	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2675	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2676	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2677	IF ( TRIM( var ) == 't*' ) unit = 'K'
2678	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2679	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2680	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2681
2682
2683	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2684	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2685	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2686	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2687	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2688	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2689	CONTINUE
2690
2691	CASE DEFAULT
2692	CALL user_check_data_output( var, unit )
2693
2694	IF ( unit == 'illegal' ) THEN
2695	IF ( data_output_user(1) /= ' ' ) THEN
2696	message_string = 'illegal value for data_output or ' // &
2697	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2698	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2699	ELSE
2700	message_string = 'illegal value for data_output =' // &
2701	TRIM( data_output(i) ) // '"'
2702	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2703	ENDIF
2704	ENDIF
2705
2706	END SELECT
2707	!
2708	!-- Set the internal steering parameters appropriately
2709	IF ( k == 0 ) THEN
2710	do3d_no(j) = do3d_no(j) + 1
2711	do3d(j,do3d_no(j)) = data_output(i)
2712	do3d_unit(j,do3d_no(j)) = unit
2713	ELSE
2714	do2d_no(j) = do2d_no(j) + 1
2715	do2d(j,do2d_no(j)) = data_output(i)
2716	do2d_unit(j,do2d_no(j)) = unit
2717	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2718	data_output_xy(j) = .TRUE.
2719	ENDIF
2720	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2721	data_output_xz(j) = .TRUE.
2722	ENDIF
2723	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2724	data_output_yz(j) = .TRUE.
2725	ENDIF
2726	ENDIF
2727
2728	IF ( j == 1 ) THEN
2729	!
2730	!-- Check, if variable is already subject to averaging
2731	found = .FALSE.
2732	DO k = 1, doav_n
2733	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2734	ENDDO
2735
2736	IF ( .NOT. found ) THEN
2737	doav_n = doav_n + 1
2738	doav(doav_n) = var
2739	ENDIF
2740	ENDIF
2741
2742	i = i + 1
2743	ENDDO
2744
2745	!
2746	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2747	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2748	WRITE( message_string, * ) 'output of averaged quantity "', &
2749	TRIM( doav(1) ), '_av" requires to set a ', &
2750	'non-zero & averaging interval'
2751	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2752	ENDIF
2753
2754	!
2755	!-- Check sectional planes and store them in one shared array
2756	IF ( ANY( section_xy > nz + 1 ) ) THEN
2757	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2758	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2759	ENDIF
2760	IF ( ANY( section_xz > ny + 1 ) ) THEN
2761	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2762	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2763	ENDIF
2764	IF ( ANY( section_yz > nx + 1 ) ) THEN
2765	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2766	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2767	ENDIF
2768	section(:,1) = section_xy
2769	section(:,2) = section_xz
2770	section(:,3) = section_yz
2771
2772	!
2773	!-- Upper plot limit for 2D vertical sections
2774	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2775	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2776	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2777	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2778	' (zu(nzt))'
2779	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2780	ENDIF
2781
2782	!
2783	!-- Upper plot limit for 3D arrays
2784	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2785
2786	!
2787	!-- Determine and check accuracy for compressed 3D plot output
2788	IF ( do3d_compress ) THEN
2789	!
2790	!-- Compression only permissible on T3E machines
2791	IF ( host(1:3) /= 't3e' ) THEN
2792	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2793	TRIM( host ) // '"'
2794	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2795	ENDIF
2796
2797	i = 1
2798	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2799
2800	ilen = LEN_TRIM( do3d_comp_prec(i) )
2801	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2802	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2803	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2804	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2805	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2806	ENDIF
2807
2808	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2809	var = do3d_comp_prec(i)(1:ilen-1)
2810
2811	SELECT CASE ( var )
2812
2813	CASE ( 'u' )
2814	j = 1
2815	CASE ( 'v' )
2816	j = 2
2817	CASE ( 'w' )
2818	j = 3
2819	CASE ( 'p' )
2820	j = 4
2821	CASE ( 'pt' )
2822	j = 5
2823
2824	CASE DEFAULT
2825	WRITE( message_string, * ) 'unknown variable "', &
2826	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2827	i, ')'
2828	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2829
2830	END SELECT
2831
2832	plot_3d_precision(j)%precision = prec
2833	i = i + 1
2834
2835	ENDDO
2836	ENDIF
2837
2838	!
2839	!-- Check the data output format(s)
2840	IF ( data_output_format(1) == ' ' ) THEN
2841	!
2842	!-- Default value
2843	netcdf_output = .TRUE.
2844	ELSE
2845	i = 1
2846	DO WHILE ( data_output_format(i) /= ' ' )
2847
2848	SELECT CASE ( data_output_format(i) )
2849
2850	CASE ( 'netcdf' )
2851	netcdf_output = .TRUE.
2852	CASE ( 'iso2d' )
2853	iso2d_output = .TRUE.
2854	CASE ( 'avs' )
2855	avs_output = .TRUE.
2856
2857	CASE DEFAULT
2858	message_string = 'unknown value for data_output_format "' // &
2859	TRIM( data_output_format(i) ) // '"'
2860	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2861
2862	END SELECT
2863
2864	i = i + 1
2865	IF ( i > 10 ) EXIT
2866
2867	ENDDO
2868	ENDIF
2869
2870	!
2871	!-- Set output format string (used in header)
2872	IF ( netcdf_output ) THEN
2873
2874	SELECT CASE ( netcdf_data_format )
2875	CASE ( 1 )
2876	output_format_netcdf = 'netCDF classic'
2877	CASE ( 2 )
2878	output_format_netcdf = 'netCDF 64bit offset'
2879	CASE ( 3 )
2880	output_format_netcdf = 'netCDF4/HDF5'
2881	CASE ( 4 )
2882	output_format_netcdf = 'netCDF4/HDF5 classic'
2883	CASE ( 5 )
2884	output_format_netcdf = 'parallel netCDF4/HDF5'
2885	CASE ( 6 )
2886	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
2887
2888	END SELECT
2889
2890	ENDIF
2891
2892	!
2893	!-- Check mask conditions
2894	DO mid = 1, max_masks
2895	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2896	data_output_masks_user(mid,1) /= ' ' ) THEN
2897	masks = masks + 1
2898	ENDIF
2899	ENDDO
2900
2901	IF ( masks < 0 .OR. masks > max_masks ) THEN
2902	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2903	'<= ', max_masks, ' (=max_masks)'
2904	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2905	ENDIF
2906	IF ( masks > 0 ) THEN
2907	mask_scale(1) = mask_scale_x
2908	mask_scale(2) = mask_scale_y
2909	mask_scale(3) = mask_scale_z
2910	IF ( ANY( mask_scale <= 0.0 ) ) THEN
2911	WRITE( message_string, * ) &
2912	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2913	'must be > 0.0'
2914	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2915	ENDIF
2916	!
2917	!-- Generate masks for masked data output
2918	CALL init_masks
2919	ENDIF
2920
2921	!
2922	!-- Check the NetCDF data format
2923	#if ! defined ( __check )
2924	IF ( netcdf_data_format > 2 ) THEN
2925	#if defined( __netcdf4 )
2926	CONTINUE
2927	#else
2928	message_string = 'netCDF: netCDF4 format requested but no ' // &
2929	'cpp-directive __netcdf4 given & switch ' // &
2930	'back to 64-bit offset format'
2931	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2932	netcdf_data_format = 2
2933	#endif
2934	ENDIF
2935	IF ( netcdf_data_format > 4 ) THEN
2936	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
2937	CONTINUE
2938	#else
2939	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
2940	'cpp-directive __netcdf4_parallel given & switch ' // &
2941	'back to netCDF4 non-parallel output'
2942	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
2943	netcdf_data_format = netcdf_data_format - 2
2944	#endif
2945	ENDIF
2946	#endif
2947
2948	#if ! defined( __check )
2949	!
2950	!-- Check netcdf precison
2951	ldum = .FALSE.
2952	CALL define_netcdf_header( 'ch', ldum, 0 )
2953	#endif
2954	!
2955	!-- Check, whether a constant diffusion coefficient shall be used
2956	IF ( km_constant /= -1.0 ) THEN
2957	IF ( km_constant < 0.0 ) THEN
2958	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2959	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2960	ELSE
2961	IF ( prandtl_number < 0.0 ) THEN
2962	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2963	' < 0.0'
2964	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2965	ENDIF
2966	constant_diffusion = .TRUE.
2967
2968	IF ( prandtl_layer ) THEN
2969	message_string = 'prandtl_layer is not allowed with fixed ' // &
2970	'value of km'
2971	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2972	ENDIF
2973	ENDIF
2974	ENDIF
2975
2976	!
2977	!-- In case of non-cyclic lateral boundaries and a damping layer for the
2978	!-- potential temperature, check the width of the damping layer
2979	IF ( bc_lr /= 'cyclic' ) THEN
2980	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
2981	message_string = 'pt_damping_width out of range'
2982	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2983	ENDIF
2984	ENDIF
2985
2986	IF ( bc_ns /= 'cyclic' ) THEN
2987	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
2988	message_string = 'pt_damping_width out of range'
2989	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2990	ENDIF
2991	ENDIF
2992
2993	!
2994	!-- Check value range for rif
2995	IF ( rif_min >= rif_max ) THEN
2996	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2997	'than rif_max = ', rif_max
2998	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2999	ENDIF
3000
3001	!
3002	!-- Determine upper and lower hight level indices for random perturbations
3003	IF ( disturbance_level_b == -9999999.9 ) THEN
3004	IF ( ocean ) THEN
3005	disturbance_level_b = zu((nzt*2)/3)
3006	disturbance_level_ind_b = ( nzt * 2 ) / 3
3007	ELSE
3008	disturbance_level_b = zu(nzb+3)
3009	disturbance_level_ind_b = nzb + 3
3010	ENDIF
3011	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3012	WRITE( message_string, * ) 'disturbance_level_b = ', &
3013	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3014	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3015	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3016	WRITE( message_string, * ) 'disturbance_level_b = ', &
3017	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3018	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3019	ELSE
3020	DO k = 3, nzt-2
3021	IF ( disturbance_level_b <= zu(k) ) THEN
3022	disturbance_level_ind_b = k
3023	EXIT
3024	ENDIF
3025	ENDDO
3026	ENDIF
3027
3028	IF ( disturbance_level_t == -9999999.9 ) THEN
3029	IF ( ocean ) THEN
3030	disturbance_level_t = zu(nzt-3)
3031	disturbance_level_ind_t = nzt - 3
3032	ELSE
3033	disturbance_level_t = zu(nzt/3)
3034	disturbance_level_ind_t = nzt / 3
3035	ENDIF
3036	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3037	WRITE( message_string, * ) 'disturbance_level_t = ', &
3038	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3039	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3040	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3041	WRITE( message_string, * ) 'disturbance_level_t = ', &
3042	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3043	disturbance_level_b
3044	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3045	ELSE
3046	DO k = 3, nzt-2
3047	IF ( disturbance_level_t <= zu(k) ) THEN
3048	disturbance_level_ind_t = k
3049	EXIT
3050	ENDIF
3051	ENDDO
3052	ENDIF
3053
3054	!
3055	!-- Check again whether the levels determined this way are ok.
3056	!-- Error may occur at automatic determination and too few grid points in
3057	!-- z-direction.
3058	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3059	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3060	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3061	disturbance_level_b
3062	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3063	ENDIF
3064
3065	!
3066	!-- Determine the horizontal index range for random perturbations.
3067	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3068	!-- near the inflow and the perturbation area is further limited to ...(1)
3069	!-- after the initial phase of the flow.
3070	dist_nxl = 0; dist_nxr = nx
3071	dist_nys = 0; dist_nyn = ny
3072	IF ( bc_lr /= 'cyclic' ) THEN
3073	IF ( inflow_disturbance_begin == -1 ) THEN
3074	inflow_disturbance_begin = MIN( 10, nx/2 )
3075	ENDIF
3076	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3077	THEN
3078	message_string = 'inflow_disturbance_begin out of range'
3079	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3080	ENDIF
3081	IF ( inflow_disturbance_end == -1 ) THEN
3082	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3083	ENDIF
3084	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3085	THEN
3086	message_string = 'inflow_disturbance_end out of range'
3087	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3088	ENDIF
3089	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3090	IF ( inflow_disturbance_begin == -1 ) THEN
3091	inflow_disturbance_begin = MIN( 10, ny/2 )
3092	ENDIF
3093	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3094	THEN
3095	message_string = 'inflow_disturbance_begin out of range'
3096	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3097	ENDIF
3098	IF ( inflow_disturbance_end == -1 ) THEN
3099	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3100	ENDIF
3101	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3102	THEN
3103	message_string = 'inflow_disturbance_end out of range'
3104	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3105	ENDIF
3106	ENDIF
3107
3108	IF ( bc_lr == 'radiation/dirichlet' .OR. bc_lr == 'neumann/dirichlet' ) THEN
3109	dist_nxr = nx - inflow_disturbance_begin
3110	dist_nxl(1) = nx - inflow_disturbance_end
3111	ELSEIF ( bc_lr == 'dirichlet/radiation' .OR. bc_lr == 'dirichlet/neumann' ) THEN
3112	dist_nxl = inflow_disturbance_begin
3113	dist_nxr(1) = inflow_disturbance_end
3114	ENDIF
3115	IF ( bc_ns == 'dirichlet/radiation' .OR. bc_ns == 'dirichlet/neumann' ) THEN
3116	dist_nyn = ny - inflow_disturbance_begin
3117	dist_nys(1) = ny - inflow_disturbance_end
3118	ELSEIF ( bc_ns == 'radiation/dirichlet' .OR. bc_ns == 'neumann/dirichlet' ) THEN
3119	dist_nys = inflow_disturbance_begin
3120	dist_nyn(1) = inflow_disturbance_end
3121	ENDIF
3122
3123	!
3124	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3125	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3126	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' .AND. bc_lr /= 'dirichlet/neumann' ) THEN
3127	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3128	'condition at the inflow boundary'
3129	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3130	ENDIF
3131
3132	!
3133	!-- In case of turbulent inflow calculate the index of the recycling plane
3134	IF ( turbulent_inflow ) THEN
3135	IF ( recycling_width == 9999999.9 ) THEN
3136	!
3137	!-- Set the default value for the width of the recycling domain
3138	recycling_width = 0.1 * nx * dx
3139	ELSE
3140	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3141	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3142	' ', recycling_width
3143	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3144	ENDIF
3145	ENDIF
3146	!
3147	!-- Calculate the index
3148	recycling_plane = recycling_width / dx
3149	ENDIF
3150
3151	!
3152	!-- Check random generator
3153	IF ( random_generator /= 'system-specific' .AND. &
3154	random_generator /= 'numerical-recipes' ) THEN
3155	message_string = 'unknown random generator: random_generator = "' // &
3156	TRIM( random_generator ) // '"'
3157	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3158	ENDIF
3159
3160	!
3161	!-- Determine damping level index for 1D model
3162	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3163	IF ( damp_level_1d == -1.0 ) THEN
3164	damp_level_1d = zu(nzt+1)
3165	damp_level_ind_1d = nzt + 1
3166	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3167	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3168	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3169	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3170	ELSE
3171	DO k = 1, nzt+1
3172	IF ( damp_level_1d <= zu(k) ) THEN
3173	damp_level_ind_1d = k
3174	EXIT
3175	ENDIF
3176	ENDDO
3177	ENDIF
3178	ENDIF
3179
3180	!
3181	!-- Check some other 1d-model parameters
3182	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3183	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3184	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3185	'" is unknown'
3186	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3187	ENDIF
3188	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3189	TRIM( dissipation_1d ) /= 'detering' ) THEN
3190	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3191	'" is unknown'
3192	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3193	ENDIF
3194
3195	!
3196	!-- Set time for the next user defined restart (time_restart is the
3197	!-- internal parameter for steering restart events)
3198	IF ( restart_time /= 9999999.9 ) THEN
3199	IF ( restart_time > time_since_reference_point ) THEN
3200	time_restart = restart_time
3201	ENDIF
3202	ELSE
3203	!
3204	!-- In case of a restart run, set internal parameter to default (no restart)
3205	!-- if the NAMELIST-parameter restart_time is omitted
3206	time_restart = 9999999.9
3207	ENDIF
3208
3209	!
3210	!-- Set default value of the time needed to terminate a model run
3211	IF ( termination_time_needed == -1.0 ) THEN
3212	IF ( host(1:3) == 'ibm' ) THEN
3213	termination_time_needed = 300.0
3214	ELSE
3215	termination_time_needed = 35.0
3216	ENDIF
3217	ENDIF
3218
3219	!
3220	!-- Check the time needed to terminate a model run
3221	IF ( host(1:3) == 't3e' ) THEN
3222	!
3223	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3224	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3225	IF ( termination_time_needed <= 30.0 ) THEN
3226	WRITE( message_string, * ) 'termination_time_needed = ', &
3227	termination_time_needed, ' must be > 30.0 on host "', &
3228	TRIM( host ), '"'
3229	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3230	ENDIF
3231	ELSEIF ( host(1:3) == 'ibm' ) THEN
3232	!
3233	!-- On IBM-regatta machines the time should be at least 300 seconds,
3234	!-- because the job time consumed before executing palm (for compiling,
3235	!-- copying of files, etc.) has to be regarded
3236	IF ( termination_time_needed < 300.0 ) THEN
3237	WRITE( message_string, * ) 'termination_time_needed = ', &
3238	termination_time_needed, ' should be >= 300.0 on host "', &
3239	TRIM( host ), '"'
3240	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3241	ENDIF
3242	ENDIF
3243
3244	!
3245	!-- Check pressure gradient conditions
3246	IF ( dp_external .AND. conserve_volume_flow ) THEN
3247	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3248	'w are .TRUE. but one of them must be .FALSE.'
3249	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3250	ENDIF
3251	IF ( dp_external ) THEN
3252	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3253	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3254	' of range'
3255	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3256	ENDIF
3257	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3258	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3259	'ro, i.e. the external pressure gradient & will not be applied'
3260	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3261	ENDIF
3262	ENDIF
3263	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3264	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3265	'.FALSE., i.e. the external pressure gradient & will not be applied'
3266	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3267	ENDIF
3268	IF ( conserve_volume_flow ) THEN
3269	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3270
3271	conserve_volume_flow_mode = 'initial_profiles'
3272
3273	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3274	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3275	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3276	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3277	conserve_volume_flow_mode
3278	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3279	ENDIF
3280	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3281	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3282	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3283	'require conserve_volume_flow_mode = ''initial_profiles'''
3284	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3285	ENDIF
3286	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3287	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3288	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3289	'require conserve_volume_flow_mode = ''initial_profiles''', &
3290	' or ''bulk_velocity'''
3291	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3292	ENDIF
3293	ENDIF
3294	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3295	( .NOT. conserve_volume_flow .OR. &
3296	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3297	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3298	'conserve_volume_flow = .T. and ', &
3299	'conserve_volume_flow_mode = ''bulk_velocity'''
3300	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3301	ENDIF
3302
3303	!
3304	!-- Check particle attributes
3305	IF ( particle_color /= 'none' ) THEN
3306	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3307	particle_color /= 'z' ) THEN
3308	message_string = 'illegal value for parameter particle_color: ' // &
3309	TRIM( particle_color)
3310	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3311	ELSE
3312	IF ( color_interval(2) <= color_interval(1) ) THEN
3313	message_string = 'color_interval(2) <= color_interval(1)'
3314	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3315	ENDIF
3316	ENDIF
3317	ENDIF
3318
3319	IF ( particle_dvrpsize /= 'none' ) THEN
3320	IF ( particle_dvrpsize /= 'absw' ) THEN
3321	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3322	' ' // TRIM( particle_color)
3323	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3324	ELSE
3325	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3326	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3327	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3328	ENDIF
3329	ENDIF
3330	ENDIF
3331
3332	!
3333	!-- Check &userpar parameters
3334	CALL user_check_parameters
3335
3336
3337
3338	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |