Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 504

Last change on this file since 504 was 494, checked in by raasch, 15 years ago
last commit documented; configuration example file for netcdf4 added
Property svn:keywords set to `Id`
File size: 121.8 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 494 2010-03-01 12:23:32Z raasch $
11	!
12	! 493 2010-03-01 08:30:24Z raasch
13	! netcdf_data_format is checked
14	!
15	! 411 2009-12-11 14:15:58Z heinze
16	! Enabled passive scalar/humidity wall fluxes for non-flat topography
17	! Initialization of large scale vertical motion (subsidence/ascent)
18	!
19	! 410 2009-12-04 17:05:40Z letzel
20	! masked data output
21	!
22	! 388 2009-09-23 09:40:33Z raasch
23	! Check profiles fpr prho and hyp.
24	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
25	! interval has been set, respective error message is included
26	! bc_lr_cyc and bc_ns_cyc are set,
27	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
28	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
29	! Coupling with independent precursor runs.
30	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
31	! Bugfix: pressure included for profile output
32	! Check pressure gradient conditions
33	! topography_grid_convention moved from user_check_parameters
34	! 'single_street_canyon'
35	! Added shf* and qsws* to the list of available output data
36	!
37	! 222 2009-01-12 16:04:16Z letzel
38	! +user_check_parameters
39	! Output of messages replaced by message handling routine.
40	! Implementation of an MPI-1 coupling: replaced myid with target_id,
41	! deleted __mpi2 directives
42	! Check that PALM is called with mrun -K parallel for coupling
43	!
44	! 197 2008-09-16 15:29:03Z raasch
45	! Bug fix: Construction of vertical profiles when 10 gradients have been
46	! specified in the parameter list (ug, vg, pt, q, sa, lad)
47	!
48	! Strict grid matching along z is not needed for mg-solver.
49	! Leaf area density (LAD) explicitly set to its surface value at k=0
50	! Case of reading data for recycling included in initializing_actions,
51	! check of turbulent_inflow and calculation of recycling_plane.
52	! q*2 profile added
53	!
54	! 138 2007-11-28 10:03:58Z letzel
55	! Plant canopy added
56	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
57	! Multigrid solver allows topography, checking of dt_sort_particles
58	! Bugfix: initializing u_init and v_init in case of ocean runs
59	!
60	! 109 2007-08-28 15:26:47Z letzel
61	! Check coupling_mode and set default (obligatory) values (like boundary
62	! conditions for temperature and fluxes) in case of coupled runs.
63	! +profiles for wp and w"e
64	! Bugfix: Error message concerning output of particle concentration (pc)
65	! modified
66	! More checks and more default values for coupled runs
67	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
68	! cloud_physics = .T.)
69	! Rayleigh damping for ocean fixed.
70	! Check and, if necessary, set default value for dt_coupling
71	!
72	! 97 2007-06-21 08:23:15Z raasch
73	! Initial salinity profile is calculated, salinity boundary conditions are
74	! checked,
75	! z_max_do1d is checked only in case of ocean = .f.,
76	! +initial temperature and geostrophic velocity profiles for the ocean version,
77	! use_pt_reference renamed use_reference
78	!
79	! 89 2007-05-25 12:08:31Z raasch
80	! Check for user-defined profiles
81	!
82	! 75 2007-03-22 09:54:05Z raasch
83	! "by_user" allowed as initializing action, -data_output_ts,
84	! leapfrog with non-flat topography not allowed any more, loop_optimization
85	! and pt_reference are checked, moisture renamed humidity,
86	! output of precipitation amount/rate and roughnes length + check
87	! possible negative humidities are avoided in initial profile,
88	! dirichlet/neumann changed to dirichlet/radiation, etc.,
89	! revision added to run_description_header
90	!
91	! 20 2007-02-26 00:12:32Z raasch
92	! Temperature and humidity gradients at top are now calculated for nzt+1,
93	! top_heatflux and respective boundary condition bc_pt_t is checked
94	!
95	! RCS Log replace by Id keyword, revision history cleaned up
96	!
97	! Revision 1.61 2006/08/04 14:20:25 raasch
98	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
99	! use_upstream_for_tke, default value for dt_dopts,
100	! generation of file header moved from routines palm and header to here
101	!
102	! Revision 1.1 1997/08/26 06:29:23 raasch
103	! Initial revision
104	!
105	!
106	! Description:
107	! ------------
108	! Check control parameters and deduce further quantities.
109	!------------------------------------------------------------------------------!
110
111	USE arrays_3d
112	USE constants
113	USE control_parameters
114	USE dvrp_variables
115	USE grid_variables
116	USE indices
117	USE model_1d
118	USE netcdf_control
119	USE particle_attributes
120	USE pegrid
121	USE profil_parameter
122	USE subsidence_mod
123	USE statistics
124	USE transpose_indices
125
126	IMPLICIT NONE
127
128	CHARACTER (LEN=1) :: sq
129	CHARACTER (LEN=6) :: var
130	CHARACTER (LEN=7) :: unit
131	CHARACTER (LEN=8) :: date
132	CHARACTER (LEN=10) :: time
133	CHARACTER (LEN=40) :: coupling_string
134	CHARACTER (LEN=100) :: action
135
136	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
137	position, prec
138	LOGICAL :: found, ldum
139	REAL :: gradient, maxn, maxp, remote = 0.0, &
140	simulation_time_since_reference
141
142	!
143	!-- Warning, if host is not set
144	IF ( host(1:1) == ' ' ) THEN
145	message_string = '"host" is not set. Please check that environment ' // &
146	'variable "localhost" & is set before running PALM'
147	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
148	ENDIF
149
150	!
151	!-- Check the coupling mode
152	IF ( coupling_mode /= 'uncoupled' .AND. &
153	coupling_mode /= 'atmosphere_to_ocean' .AND. &
154	coupling_mode /= 'ocean_to_atmosphere' ) THEN
155	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
156	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
157	ENDIF
158
159	!
160	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
161	IF ( coupling_mode /= 'uncoupled' ) THEN
162
163	IF ( dt_coupling == 9999999.9 ) THEN
164	message_string = 'dt_coupling is not set but required for coup' // &
165	'ling mode "' // TRIM( coupling_mode ) // '"'
166	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
167	ENDIF
168
169	#if defined( __parallel )
170	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
171	ierr )
172	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
173	status, ierr )
174	IF ( dt_coupling /= remote ) THEN
175	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
176	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
177	'dt_coupling_remote = ', remote
178	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
179	ENDIF
180	IF ( dt_coupling <= 0.0 ) THEN
181	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
182	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
183	status, ierr )
184	dt_coupling = MAX( dt_max, remote )
185	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
186	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
187	'MAX(dt_max(A,O)) = ', dt_coupling
188	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
189	ENDIF
190
191	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
192	ierr )
193	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
194	status, ierr )
195	IF ( restart_time /= remote ) THEN
196	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
197	'": restart_time = ', restart_time, '& is not equal to ', &
198	'restart_time_remote = ', remote
199	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
200	ENDIF
201
202	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
203	ierr )
204	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
205	status, ierr )
206	IF ( dt_restart /= remote ) THEN
207	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
208	'": dt_restart = ', dt_restart, '& is not equal to ', &
209	'dt_restart_remote = ', remote
210	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
211	ENDIF
212
213	simulation_time_since_reference = end_time - coupling_start_time
214	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
215	14, comm_inter, ierr )
216	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
217	status, ierr )
218	IF ( simulation_time_since_reference /= remote ) THEN
219	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
220	'": simulation_time_since_reference = ', &
221	simulation_time_since_reference, '& is not equal to ', &
222	'simulation_time_since_reference_remote = ', remote
223	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
224	ENDIF
225
226	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
227	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
228	status, ierr )
229	IF ( dx /= remote ) THEN
230	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
231	'": dx = ', dx, '& is not equal to dx_remote = ', remote
232	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
233	ENDIF
234
235	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
236	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
237	status, ierr )
238	IF ( dy /= remote ) THEN
239	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
240	'": dy = ', dy, '& is not equal to dy_remote = ', remote
241	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
242	ENDIF
243
244	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
245	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
246	status, ierr )
247	IF ( nx /= iremote ) THEN
248	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
249	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
250	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
251	ENDIF
252
253	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
254	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
255	status, ierr )
256	IF ( ny /= iremote ) THEN
257	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
258	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
259	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
260	ENDIF
261	#else
262	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
263	' ''mrun -K parallel'''
264	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
265	#endif
266	ENDIF
267
268	#if defined( __parallel )
269	!
270	!-- Exchange via intercommunicator
271	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
272	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
273	ierr )
274	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
275	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
276	comm_inter, status, ierr )
277	ENDIF
278	#endif
279
280
281	!
282	!-- Generate the file header which is used as a header for most of PALM's
283	!-- output files
284	CALL DATE_AND_TIME( date, time )
285	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
286	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
287	IF ( coupling_mode == 'uncoupled' ) THEN
288	coupling_string = ''
289	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
290	coupling_string = ' coupled (atmosphere)'
291	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
292	coupling_string = ' coupled (ocean)'
293	ENDIF
294
295	WRITE ( run_description_header, &
296	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
297	TRIM( version ), TRIM( revision ), 'run: ', &
298	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
299	'host: ', TRIM( host ), run_date, run_time
300
301	!
302	!-- Check the general loop optimization method
303	IF ( loop_optimization == 'default' ) THEN
304	IF ( host(1:3) == 'nec' ) THEN
305	loop_optimization = 'vector'
306	ELSE
307	loop_optimization = 'cache'
308	ENDIF
309	ENDIF
310	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
311	.AND. loop_optimization /= 'vector' ) THEN
312	message_string = 'illegal value given for loop_optimization: "' // &
313	TRIM( loop_optimization ) // '"'
314	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
315	ENDIF
316
317	!
318	!-- Check topography setting (check for illegal parameter combinations)
319	IF ( topography /= 'flat' ) THEN
320	action = ' '
321	IF ( scalar_advec /= 'pw-scheme' ) THEN
322	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
323	ENDIF
324	IF ( momentum_advec /= 'pw-scheme' ) THEN
325	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
326	ENDIF
327	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
328	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
329	ENDIF
330	IF ( psolver == 'sor' ) THEN
331	WRITE( action, '(A,A)' ) 'psolver = ', psolver
332	ENDIF
333	IF ( sloping_surface ) THEN
334	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
335	ENDIF
336	IF ( galilei_transformation ) THEN
337	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
338	ENDIF
339	IF ( cloud_physics ) THEN
340	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
341	ENDIF
342	IF ( cloud_droplets ) THEN
343	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
344	ENDIF
345	IF ( .NOT. prandtl_layer ) THEN
346	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
347	ENDIF
348	IF ( action /= ' ' ) THEN
349	message_string = 'a non-flat topography does not allow ' // &
350	TRIM( action )
351	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
352	ENDIF
353	!
354	!-- In case of non-flat topography, check whether the convention how to
355	!-- define the topography grid has been set correctly, or whether the default
356	!-- is applicable. If this is not possible, abort.
357	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
358	IF ( TRIM( topography ) /= 'single_building' .AND. &
359	TRIM( topography ) /= 'single_street_canyon' .AND. &
360	TRIM( topography ) /= 'read_from_file' ) THEN
361	!-- The default value is not applicable here, because it is only valid
362	!-- for the two standard cases 'single_building' and 'read_from_file'
363	!-- defined in init_grid.
364	WRITE( message_string, * ) &
365	'The value for "topography_grid_convention" ', &
366	'is not set. Its default value is & only valid for ', &
367	'"topography" = ''single_building'', ', &
368	'''single_street_canyon'' & or ''read_from_file''.', &
369	' & Choose ''cell_edge'' or ''cell_center''.'
370	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
371	ELSE
372	!-- The default value is applicable here.
373	!-- Set convention according to topography.
374	IF ( TRIM( topography ) == 'single_building' .OR. &
375	TRIM( topography ) == 'single_street_canyon' ) THEN
376	topography_grid_convention = 'cell_edge'
377	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
378	topography_grid_convention = 'cell_center'
379	ENDIF
380	ENDIF
381	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
382	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
383	WRITE( message_string, * ) &
384	'The value for "topography_grid_convention" is ', &
385	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
386	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
387	ENDIF
388
389	ENDIF
390
391	!
392	!-- Check ocean setting
393	IF ( ocean ) THEN
394
395	action = ' '
396	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
397	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
398	ENDIF
399	IF ( momentum_advec == 'ups-scheme' ) THEN
400	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
401	ENDIF
402	IF ( action /= ' ' ) THEN
403	message_string = 'ocean = .T. does not allow ' // TRIM( action )
404	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
405	ENDIF
406
407	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
408	TRIM( coupling_char ) == '_O' ) THEN
409
410	!
411	!-- Check whether an (uncoupled) atmospheric run has been declared as an
412	!-- ocean run (this setting is done via mrun-option -y)
413
414	message_string = 'ocean = .F. does not allow coupling_char = "' // &
415	TRIM( coupling_char ) // '" set by mrun-option "-y"'
416	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
417
418	ENDIF
419
420	!
421	!-- Check whether there are any illegal values
422	!-- Pressure solver:
423	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
424	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
425	message_string = 'unknown solver for perturbation pressure: psolver' // &
426	' = "' // TRIM( psolver ) // '"'
427	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
428	ENDIF
429
430	#if defined( __parallel )
431	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
432	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
433	'for a 1d domain-decomposition along x & please do' // &
434	' not set npey/=1 in the parameter file'
435	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
436	ENDIF
437	IF ( psolver == 'poisfft_hybrid' .AND. &
438	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
439	psolver == 'multigrid' .AND. &
440	( nxra > nxr .OR. nyna > nyn ) ) THEN
441	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
442	'work for subdomains with unequal size & please ' // &
443	'set grid_matching = ''strict'' in the parameter file'
444	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
445	ENDIF
446	#else
447	IF ( psolver == 'poisfft_hybrid' ) THEN
448	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
449	' for a parallel environment'
450	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
451	ENDIF
452	#endif
453
454	IF ( psolver == 'multigrid' ) THEN
455	IF ( cycle_mg == 'w' ) THEN
456	gamma_mg = 2
457	ELSEIF ( cycle_mg == 'v' ) THEN
458	gamma_mg = 1
459	ELSE
460	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
461	TRIM( cycle_mg ) // '"'
462	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
463	ENDIF
464	ENDIF
465
466	IF ( fft_method /= 'singleton-algorithm' .AND. &
467	fft_method /= 'temperton-algorithm' .AND. &
468	fft_method /= 'system-specific' ) THEN
469	message_string = 'unknown fft-algorithm: fft_method = "' // &
470	TRIM( fft_method ) // '"'
471	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
472	ENDIF
473
474	!
475	!-- Advection schemes:
476	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
477	THEN
478	message_string = 'unknown advection scheme: momentum_advec = "' // &
479	TRIM( momentum_advec ) // '"'
480	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
481	ENDIF
482	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
483	.AND. timestep_scheme /= 'euler' ) THEN
484	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
485	'" is not allowed with timestep_scheme = "' // &
486	TRIM( timestep_scheme ) // '"'
487	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
488	ENDIF
489
490	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
491	scalar_advec /= 'ups-scheme' ) THEN
492	message_string = 'unknown advection scheme: scalar_advec = "' // &
493	TRIM( scalar_advec ) // '"'
494	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
495	ENDIF
496
497	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
498	use_upstream_for_tke = .TRUE.
499	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
500	'use_sgs_for_particles = .TRUE.'
501	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
502	ENDIF
503
504	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
505	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
506	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
507	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
508	ENDIF
509
510	!
511	!-- Timestep schemes:
512	SELECT CASE ( TRIM( timestep_scheme ) )
513
514	CASE ( 'euler' )
515	intermediate_timestep_count_max = 1
516	asselin_filter_factor = 0.0
517
518	CASE ( 'leapfrog', 'leapfrog+euler' )
519	intermediate_timestep_count_max = 1
520
521	CASE ( 'runge-kutta-2' )
522	intermediate_timestep_count_max = 2
523	asselin_filter_factor = 0.0
524
525	CASE ( 'runge-kutta-3' )
526	intermediate_timestep_count_max = 3
527	asselin_filter_factor = 0.0
528
529	CASE DEFAULT
530	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
531	TRIM( timestep_scheme ) // '"'
532	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
533
534	END SELECT
535
536	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
537	THEN
538	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
539	'" & does not work with timestep_scheme "' // &
540	TRIM( timestep_scheme ) // '"'
541	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
542	ENDIF
543
544	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
545	THEN
546	message_string = 'momentum advection scheme "' // &
547	TRIM( momentum_advec ) // '" & does not work with ' // &
548	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
549	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
550	ENDIF
551
552	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
553	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
554	!
555	!-- No restart run: several initialising actions are possible
556	action = initializing_actions
557	DO WHILE ( TRIM( action ) /= '' )
558	position = INDEX( action, ' ' )
559	SELECT CASE ( action(1:position-1) )
560
561	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
562	'by_user', 'initialize_vortex', 'initialize_ptanom' )
563	action = action(position+1:)
564
565	CASE DEFAULT
566	message_string = 'initializing_action = "' // &
567	TRIM( action ) // '" unkown or not allowed'
568	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
569
570	END SELECT
571	ENDDO
572	ENDIF
573
574	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
575	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
576	message_string = 'initializing_actions = "set_constant_profiles"' // &
577	' and "set_1d-model_profiles" are not allowed ' // &
578	'simultaneously'
579	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
580	ENDIF
581
582	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
583	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
584	message_string = 'initializing_actions = "set_constant_profiles"' // &
585	' and "by_user" are not allowed simultaneously'
586	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
587	ENDIF
588
589	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
590	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
591	message_string = 'initializing_actions = "by_user" and ' // &
592	'"set_1d-model_profiles" are not allowed simultaneously'
593	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
594	ENDIF
595
596	IF ( cloud_physics .AND. .NOT. humidity ) THEN
597	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
598	'not allowed with humidity = ', humidity
599	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
600	ENDIF
601
602	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
603	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
604	'not allowed with cloud_physics = ', cloud_physics
605	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
606	ENDIF
607
608	IF ( humidity .AND. sloping_surface ) THEN
609	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
610	'are not allowed simultaneously'
611	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
612	ENDIF
613
614	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
615	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
616	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
617	ENDIF
618
619	IF ( passive_scalar .AND. humidity ) THEN
620	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
621	'is not allowed simultaneously'
622	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
623	ENDIF
624
625	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
626	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
627	' = .TRUE.'
628	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
629	ENDIF
630
631	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
632	message_string = 'illegal value "' // TRIM( grid_matching ) // &
633	'" found for parameter grid_matching'
634	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
635	ENDIF
636
637	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
638	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
639	'coefficient & given value is drag_coefficient = 0.0'
640	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
641	ENDIF
642
643	!
644	!-- In case of no model continuation run, check initialising parameters and
645	!-- deduce further quantities
646	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
647
648	!
649	!-- Initial profiles for 1D and 3D model, respectively
650	u_init = ug_surface
651	v_init = vg_surface
652	pt_init = pt_surface
653	IF ( humidity ) q_init = q_surface
654	IF ( ocean ) sa_init = sa_surface
655	IF ( passive_scalar ) q_init = s_surface
656	IF ( plant_canopy ) lad = 0.0
657
658	!
659	!--
660	!-- If required, compute initial profile of the geostrophic wind
661	!-- (component ug)
662	i = 1
663	gradient = 0.0
664
665	IF ( .NOT. ocean ) THEN
666
667	ug_vertical_gradient_level_ind(1) = 0
668	ug(0) = ug_surface
669	DO k = 1, nzt+1
670	IF ( i < 11 ) THEN
671	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
672	ug_vertical_gradient_level(i) >= 0.0 ) THEN
673	gradient = ug_vertical_gradient(i) / 100.0
674	ug_vertical_gradient_level_ind(i) = k - 1
675	i = i + 1
676	ENDIF
677	ENDIF
678	IF ( gradient /= 0.0 ) THEN
679	IF ( k /= 1 ) THEN
680	ug(k) = ug(k-1) + dzu(k) * gradient
681	ELSE
682	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
683	ENDIF
684	ELSE
685	ug(k) = ug(k-1)
686	ENDIF
687	ENDDO
688
689	ELSE
690
691	ug_vertical_gradient_level_ind(1) = nzt+1
692	ug(nzt+1) = ug_surface
693	DO k = nzt, 0, -1
694	IF ( i < 11 ) THEN
695	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
696	ug_vertical_gradient_level(i) <= 0.0 ) THEN
697	gradient = ug_vertical_gradient(i) / 100.0
698	ug_vertical_gradient_level_ind(i) = k + 1
699	i = i + 1
700	ENDIF
701	ENDIF
702	IF ( gradient /= 0.0 ) THEN
703	IF ( k /= nzt ) THEN
704	ug(k) = ug(k+1) - dzu(k+1) * gradient
705	ELSE
706	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
707	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
708	ENDIF
709	ELSE
710	ug(k) = ug(k+1)
711	ENDIF
712	ENDDO
713
714	ENDIF
715
716	u_init = ug
717
718	!
719	!-- In case of no given gradients for ug, choose a vanishing gradient
720	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
721	ug_vertical_gradient_level(1) = 0.0
722	ENDIF
723
724	!
725	!--
726	!-- If required, compute initial profile of the geostrophic wind
727	!-- (component vg)
728	i = 1
729	gradient = 0.0
730
731	IF ( .NOT. ocean ) THEN
732
733	vg_vertical_gradient_level_ind(1) = 0
734	vg(0) = vg_surface
735	DO k = 1, nzt+1
736	IF ( i < 11 ) THEN
737	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
738	vg_vertical_gradient_level(i) >= 0.0 ) THEN
739	gradient = vg_vertical_gradient(i) / 100.0
740	vg_vertical_gradient_level_ind(i) = k - 1
741	i = i + 1
742	ENDIF
743	ENDIF
744	IF ( gradient /= 0.0 ) THEN
745	IF ( k /= 1 ) THEN
746	vg(k) = vg(k-1) + dzu(k) * gradient
747	ELSE
748	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
749	ENDIF
750	ELSE
751	vg(k) = vg(k-1)
752	ENDIF
753	ENDDO
754
755	ELSE
756
757	vg_vertical_gradient_level_ind(1) = nzt+1
758	vg(nzt+1) = vg_surface
759	DO k = nzt, 0, -1
760	IF ( i < 11 ) THEN
761	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
762	vg_vertical_gradient_level(i) <= 0.0 ) THEN
763	gradient = vg_vertical_gradient(i) / 100.0
764	vg_vertical_gradient_level_ind(i) = k + 1
765	i = i + 1
766	ENDIF
767	ENDIF
768	IF ( gradient /= 0.0 ) THEN
769	IF ( k /= nzt ) THEN
770	vg(k) = vg(k+1) - dzu(k+1) * gradient
771	ELSE
772	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
773	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
774	ENDIF
775	ELSE
776	vg(k) = vg(k+1)
777	ENDIF
778	ENDDO
779
780	ENDIF
781
782	v_init = vg
783
784	!
785	!-- In case of no given gradients for vg, choose a vanishing gradient
786	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
787	vg_vertical_gradient_level(1) = 0.0
788	ENDIF
789
790	!
791	!-- Compute initial temperature profile using the given temperature gradients
792	i = 1
793	gradient = 0.0
794
795	IF ( .NOT. ocean ) THEN
796
797	pt_vertical_gradient_level_ind(1) = 0
798	DO k = 1, nzt+1
799	IF ( i < 11 ) THEN
800	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
801	pt_vertical_gradient_level(i) >= 0.0 ) THEN
802	gradient = pt_vertical_gradient(i) / 100.0
803	pt_vertical_gradient_level_ind(i) = k - 1
804	i = i + 1
805	ENDIF
806	ENDIF
807	IF ( gradient /= 0.0 ) THEN
808	IF ( k /= 1 ) THEN
809	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
810	ELSE
811	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
812	ENDIF
813	ELSE
814	pt_init(k) = pt_init(k-1)
815	ENDIF
816	ENDDO
817
818	ELSE
819
820	pt_vertical_gradient_level_ind(1) = nzt+1
821	DO k = nzt, 0, -1
822	IF ( i < 11 ) THEN
823	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
824	pt_vertical_gradient_level(i) <= 0.0 ) THEN
825	gradient = pt_vertical_gradient(i) / 100.0
826	pt_vertical_gradient_level_ind(i) = k + 1
827	i = i + 1
828	ENDIF
829	ENDIF
830	IF ( gradient /= 0.0 ) THEN
831	IF ( k /= nzt ) THEN
832	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
833	ELSE
834	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
835	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
836	ENDIF
837	ELSE
838	pt_init(k) = pt_init(k+1)
839	ENDIF
840	ENDDO
841
842	ENDIF
843
844	!
845	!-- In case of no given temperature gradients, choose gradient of neutral
846	!-- stratification
847	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
848	pt_vertical_gradient_level(1) = 0.0
849	ENDIF
850
851	!
852	!-- Store temperature gradient at the top boundary for possible Neumann
853	!-- boundary condition
854	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
855
856	!
857	!-- If required, compute initial humidity or scalar profile using the given
858	!-- humidity/scalar gradient. In case of scalar transport, initially store
859	!-- values of the scalar parameters on humidity parameters
860	IF ( passive_scalar ) THEN
861	bc_q_b = bc_s_b
862	bc_q_t = bc_s_t
863	q_surface = s_surface
864	q_surface_initial_change = s_surface_initial_change
865	q_vertical_gradient = s_vertical_gradient
866	q_vertical_gradient_level = s_vertical_gradient_level
867	surface_waterflux = surface_scalarflux
868	wall_humidityflux = wall_scalarflux
869	ENDIF
870
871	IF ( humidity .OR. passive_scalar ) THEN
872
873	i = 1
874	gradient = 0.0
875	q_vertical_gradient_level_ind(1) = 0
876	DO k = 1, nzt+1
877	IF ( i < 11 ) THEN
878	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
879	q_vertical_gradient_level(i) >= 0.0 ) THEN
880	gradient = q_vertical_gradient(i) / 100.0
881	q_vertical_gradient_level_ind(i) = k - 1
882	i = i + 1
883	ENDIF
884	ENDIF
885	IF ( gradient /= 0.0 ) THEN
886	IF ( k /= 1 ) THEN
887	q_init(k) = q_init(k-1) + dzu(k) * gradient
888	ELSE
889	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
890	ENDIF
891	ELSE
892	q_init(k) = q_init(k-1)
893	ENDIF
894	!
895	!-- Avoid negative humidities
896	IF ( q_init(k) < 0.0 ) THEN
897	q_init(k) = 0.0
898	ENDIF
899	ENDDO
900
901	!
902	!-- In case of no given humidity gradients, choose zero gradient
903	!-- conditions
904	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
905	q_vertical_gradient_level(1) = 0.0
906	ENDIF
907
908	!
909	!-- Store humidity gradient at the top boundary for possile Neumann
910	!-- boundary condition
911	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
912
913	ENDIF
914
915	!
916	!-- If required, compute initial salinity profile using the given salinity
917	!-- gradients
918	IF ( ocean ) THEN
919
920	i = 1
921	gradient = 0.0
922
923	sa_vertical_gradient_level_ind(1) = nzt+1
924	DO k = nzt, 0, -1
925	IF ( i < 11 ) THEN
926	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
927	sa_vertical_gradient_level(i) <= 0.0 ) THEN
928	gradient = sa_vertical_gradient(i) / 100.0
929	sa_vertical_gradient_level_ind(i) = k + 1
930	i = i + 1
931	ENDIF
932	ENDIF
933	IF ( gradient /= 0.0 ) THEN
934	IF ( k /= nzt ) THEN
935	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
936	ELSE
937	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
938	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
939	ENDIF
940	ELSE
941	sa_init(k) = sa_init(k+1)
942	ENDIF
943	ENDDO
944
945	ENDIF
946
947	!
948	!-- If required compute the profile of leaf area density used in the plant
949	!-- canopy model
950	IF ( plant_canopy ) THEN
951
952	i = 1
953	gradient = 0.0
954
955	IF ( .NOT. ocean ) THEN
956
957	lad(0) = lad_surface
958
959	lad_vertical_gradient_level_ind(1) = 0
960	DO k = 1, pch_index
961	IF ( i < 11 ) THEN
962	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
963	lad_vertical_gradient_level(i) >= 0.0 ) THEN
964	gradient = lad_vertical_gradient(i)
965	lad_vertical_gradient_level_ind(i) = k - 1
966	i = i + 1
967	ENDIF
968	ENDIF
969	IF ( gradient /= 0.0 ) THEN
970	IF ( k /= 1 ) THEN
971	lad(k) = lad(k-1) + dzu(k) * gradient
972	ELSE
973	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
974	ENDIF
975	ELSE
976	lad(k) = lad(k-1)
977	ENDIF
978	ENDDO
979
980	ENDIF
981
982	!
983	!-- In case of no given leaf area density gradients, choose a vanishing
984	!-- gradient
985	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
986	lad_vertical_gradient_level(1) = 0.0
987	ENDIF
988
989	ENDIF
990
991	ENDIF
992
993	!
994	!-- Initialize large scale subsidence if required
995	IF ( ws_vertical_gradient_level(1) /= -9999999.9 ) THEN
996	large_scale_subsidence = .TRUE.
997	CALL init_w_subsidence
998	END IF
999
1000
1001	!
1002	!-- Compute Coriolis parameter
1003	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1004	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1005
1006	!
1007	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1008	!-- set the reference temperature equal to the surface temperature.
1009	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1010
1011	!
1012	!-- Reference value has to be used in buoyancy terms
1013	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1014
1015	!
1016	!-- Sign of buoyancy/stability terms
1017	IF ( ocean ) atmos_ocean_sign = -1.0
1018
1019	!
1020	!-- Ocean version must use flux boundary conditions at the top
1021	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1022	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1023	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1024	ENDIF
1025
1026	!
1027	!-- In case of a given slope, compute the relevant quantities
1028	IF ( alpha_surface /= 0.0 ) THEN
1029	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1030	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1031	' ) must be < 90.0'
1032	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1033	ENDIF
1034	sloping_surface = .TRUE.
1035	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1036	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1037	ENDIF
1038
1039	!
1040	!-- Check time step and cfl_factor
1041	IF ( dt /= -1.0 ) THEN
1042	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1043	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1044	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1045	ENDIF
1046	dt_3d = dt
1047	dt_fixed = .TRUE.
1048	ENDIF
1049
1050	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1051	IF ( cfl_factor == -1.0 ) THEN
1052	IF ( momentum_advec == 'ups-scheme' .OR. &
1053	scalar_advec == 'ups-scheme' ) THEN
1054	cfl_factor = 0.8
1055	ELSE
1056	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1057	cfl_factor = 0.8
1058	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1059	cfl_factor = 0.9
1060	ELSE
1061	cfl_factor = 0.1
1062	ENDIF
1063	ENDIF
1064	ELSE
1065	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1066	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1067	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1068	ENDIF
1069	ENDIF
1070
1071	!
1072	!-- Store simulated time at begin
1073	simulated_time_at_begin = simulated_time
1074
1075	!
1076	!-- Store reference time for coupled runs and change the coupling flag,
1077	!-- if ...
1078	IF ( simulated_time == 0.0 ) THEN
1079	IF ( coupling_start_time == 0.0 ) THEN
1080	time_since_reference_point = 0.0
1081	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1082	run_coupled = .FALSE.
1083	ENDIF
1084	ENDIF
1085
1086	!
1087	!-- Set wind speed in the Galilei-transformed system
1088	IF ( galilei_transformation ) THEN
1089	IF ( use_ug_for_galilei_tr .AND. &
1090	ug_vertical_gradient_level(1) == 0.0 .AND. &
1091	vg_vertical_gradient_level(1) == 0.0 ) THEN
1092	u_gtrans = ug_surface
1093	v_gtrans = vg_surface
1094	ELSEIF ( use_ug_for_galilei_tr .AND. &
1095	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1096	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1097	' with galilei transformation'
1098	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1099	ELSEIF ( use_ug_for_galilei_tr .AND. &
1100	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1101	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1102	' with galilei transformation'
1103	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1104	ELSE
1105	message_string = 'variable translation speed used for galilei-' // &
1106	'transformation, which may cause & instabilities in stably ' // &
1107	'stratified regions'
1108	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1109	ENDIF
1110	ENDIF
1111
1112	!
1113	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1114	!-- fluxes have to be used in the diffusion-terms
1115	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1116
1117	!
1118	!-- Check boundary conditions and set internal variables:
1119	!-- Lateral boundary conditions
1120	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1121	bc_lr /= 'radiation/dirichlet' ) THEN
1122	message_string = 'unknown boundary condition: bc_lr = "' // &
1123	TRIM( bc_lr ) // '"'
1124	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1125	ENDIF
1126	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1127	bc_ns /= 'radiation/dirichlet' ) THEN
1128	message_string = 'unknown boundary condition: bc_ns = "' // &
1129	TRIM( bc_ns ) // '"'
1130	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1131	ENDIF
1132
1133	!
1134	!-- Internal variables used for speed optimization in if clauses
1135	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1136	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1137
1138	!
1139	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1140	!-- Willimas advection scheme. Several schemes and tools do not work with
1141	!-- non-cyclic boundary conditions.
1142	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1143	IF ( psolver /= 'multigrid' ) THEN
1144	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1145	'psolver = "' // TRIM( psolver ) // '"'
1146	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1147	ENDIF
1148	IF ( momentum_advec /= 'pw-scheme' ) THEN
1149	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1150	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1151	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1152	ENDIF
1153	IF ( scalar_advec /= 'pw-scheme' ) THEN
1154	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1155	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1156	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1157	ENDIF
1158	IF ( galilei_transformation ) THEN
1159	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1160	'galilei_transformation = .T.'
1161	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1162	ENDIF
1163	ENDIF
1164
1165	!
1166	!-- Bottom boundary condition for the turbulent Kinetic energy
1167	IF ( bc_e_b == 'neumann' ) THEN
1168	ibc_e_b = 1
1169	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1170	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1171	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1172	ENDIF
1173	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1174	ibc_e_b = 2
1175	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1176	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1177	TRIM( bc_e_b ) // '"'
1178	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1179	ENDIF
1180	IF ( .NOT. prandtl_layer ) THEN
1181	bc_e_b = 'neumann'
1182	ibc_e_b = 1
1183	message_string = 'boundary condition bc_e_b changed to "' // &
1184	TRIM( bc_e_b ) // '"'
1185	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1186	ENDIF
1187	ELSE
1188	message_string = 'unknown boundary condition: bc_e_b = "' // &
1189	TRIM( bc_e_b ) // '"'
1190	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1191	ENDIF
1192
1193	!
1194	!-- Boundary conditions for perturbation pressure
1195	IF ( bc_p_b == 'dirichlet' ) THEN
1196	ibc_p_b = 0
1197	ELSEIF ( bc_p_b == 'neumann' ) THEN
1198	ibc_p_b = 1
1199	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1200	ibc_p_b = 2
1201	ELSE
1202	message_string = 'unknown boundary condition: bc_p_b = "' // &
1203	TRIM( bc_p_b ) // '"'
1204	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1205	ENDIF
1206	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1207	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1208	'" not allowed with prandtl_layer = .FALSE.'
1209	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1210	ENDIF
1211	IF ( bc_p_t == 'dirichlet' ) THEN
1212	ibc_p_t = 0
1213	ELSEIF ( bc_p_t == 'neumann' ) THEN
1214	ibc_p_t = 1
1215	ELSE
1216	message_string = 'unknown boundary condition: bc_p_t = "' // &
1217	TRIM( bc_p_t ) // '"'
1218	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1219	ENDIF
1220
1221	!
1222	!-- Boundary conditions for potential temperature
1223	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1224	ibc_pt_b = 2
1225	ELSE
1226	IF ( bc_pt_b == 'dirichlet' ) THEN
1227	ibc_pt_b = 0
1228	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1229	ibc_pt_b = 1
1230	ELSE
1231	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1232	TRIM( bc_pt_b ) // '"'
1233	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1234	ENDIF
1235	ENDIF
1236
1237	IF ( bc_pt_t == 'dirichlet' ) THEN
1238	ibc_pt_t = 0
1239	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1240	ibc_pt_t = 1
1241	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1242	ibc_pt_t = 2
1243	ELSE
1244	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1245	TRIM( bc_pt_t ) // '"'
1246	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1247	ENDIF
1248
1249	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1250	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1251	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1252	top_momentumflux_v /= 9999999.9 ) THEN
1253	constant_top_momentumflux = .TRUE.
1254	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1255	top_momentumflux_v == 9999999.9 ) ) THEN
1256	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1257	'must be set'
1258	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1259	ENDIF
1260
1261	!
1262	!-- A given surface temperature implies Dirichlet boundary condition for
1263	!-- temperature. In this case specification of a constant heat flux is
1264	!-- forbidden.
1265	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1266	surface_heatflux /= 0.0 ) THEN
1267	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1268	'& is not allowed with constant_heatflux = .TRUE.'
1269	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1270	ENDIF
1271	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1272	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1273	'wed with pt_surface_initial_change (/=0) = ', &
1274	pt_surface_initial_change
1275	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1276	ENDIF
1277
1278	!
1279	!-- A given temperature at the top implies Dirichlet boundary condition for
1280	!-- temperature. In this case specification of a constant heat flux is
1281	!-- forbidden.
1282	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1283	top_heatflux /= 0.0 ) THEN
1284	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1285	'" is not allowed with constant_top_heatflux = .TRUE.'
1286	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1287	ENDIF
1288
1289	!
1290	!-- Boundary conditions for salinity
1291	IF ( ocean ) THEN
1292	IF ( bc_sa_t == 'dirichlet' ) THEN
1293	ibc_sa_t = 0
1294	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1295	ibc_sa_t = 1
1296	ELSE
1297	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1298	TRIM( bc_sa_t ) // '"'
1299	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1300	ENDIF
1301
1302	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1303	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1304	message_string = 'boundary condition: bc_sa_t = "' // &
1305	TRIM( bc_sa_t ) // '" requires to set ' // &
1306	'top_salinityflux'
1307	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1308	ENDIF
1309
1310	!
1311	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1312	!-- salinity. In this case specification of a constant salinity flux is
1313	!-- forbidden.
1314	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1315	top_salinityflux /= 0.0 ) THEN
1316	message_string = 'boundary condition: bc_sa_t = "' // &
1317	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1318	'constant_top_salinityflux = .TRUE.'
1319	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1320	ENDIF
1321
1322	ENDIF
1323
1324	!
1325	!-- In case of humidity or passive scalar, set boundary conditions for total
1326	!-- water content / scalar
1327	IF ( humidity .OR. passive_scalar ) THEN
1328	IF ( humidity ) THEN
1329	sq = 'q'
1330	ELSE
1331	sq = 's'
1332	ENDIF
1333	IF ( bc_q_b == 'dirichlet' ) THEN
1334	ibc_q_b = 0
1335	ELSEIF ( bc_q_b == 'neumann' ) THEN
1336	ibc_q_b = 1
1337	ELSE
1338	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1339	'_b ="' // TRIM( bc_q_b ) // '"'
1340	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1341	ENDIF
1342	IF ( bc_q_t == 'dirichlet' ) THEN
1343	ibc_q_t = 0
1344	ELSEIF ( bc_q_t == 'neumann' ) THEN
1345	ibc_q_t = 1
1346	ELSE
1347	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1348	'_t ="' // TRIM( bc_q_t ) // '"'
1349	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1350	ENDIF
1351
1352	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1353
1354	!
1355	!-- A given surface humidity implies Dirichlet boundary condition for
1356	!-- humidity. In this case specification of a constant water flux is
1357	!-- forbidden.
1358	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1359	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1360	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1361	'th prescribed surface flux'
1362	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1363	ENDIF
1364	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1365	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1366	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1367	q_surface_initial_change
1368	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1369	ENDIF
1370
1371	ENDIF
1372
1373	!
1374	!-- Boundary conditions for horizontal components of wind speed
1375	IF ( bc_uv_b == 'dirichlet' ) THEN
1376	ibc_uv_b = 0
1377	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1378	ibc_uv_b = 1
1379	IF ( prandtl_layer ) THEN
1380	message_string = 'boundary condition: bc_uv_b = "' // &
1381	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1382	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1383	ENDIF
1384	ELSE
1385	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1386	TRIM( bc_uv_b ) // '"'
1387	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1388	ENDIF
1389
1390	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1391	bc_uv_t = 'neumann'
1392	ibc_uv_t = 1
1393	ELSE
1394	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1395	ibc_uv_t = 0
1396	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1397	ibc_uv_t = 1
1398	ELSE
1399	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1400	TRIM( bc_uv_t ) // '"'
1401	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1402	ENDIF
1403	ENDIF
1404
1405	!
1406	!-- Compute and check, respectively, the Rayleigh Damping parameter
1407	IF ( rayleigh_damping_factor == -1.0 ) THEN
1408	IF ( momentum_advec == 'ups-scheme' ) THEN
1409	rayleigh_damping_factor = 0.01
1410	ELSE
1411	rayleigh_damping_factor = 0.0
1412	ENDIF
1413	ELSE
1414	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1415	THEN
1416	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1417	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1418	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1419	ENDIF
1420	ENDIF
1421
1422	IF ( rayleigh_damping_height == -1.0 ) THEN
1423	IF ( .NOT. ocean ) THEN
1424	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1425	ELSE
1426	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1427	ENDIF
1428	ELSE
1429	IF ( .NOT. ocean ) THEN
1430	IF ( rayleigh_damping_height < 0.0 .OR. &
1431	rayleigh_damping_height > zu(nzt) ) THEN
1432	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1433	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1434	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1435	ENDIF
1436	ELSE
1437	IF ( rayleigh_damping_height > 0.0 .OR. &
1438	rayleigh_damping_height < zu(nzb) ) THEN
1439	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1440	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1441	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1442	ENDIF
1443	ENDIF
1444	ENDIF
1445
1446	!
1447	!-- Check limiters for Upstream-Spline scheme
1448	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1449	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1450	overshoot_limit_e < 0.0 ) THEN
1451	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1452	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1453	ENDIF
1454	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1455	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1456	message_string = 'ups_limit_... < 0.0 is not allowed'
1457	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1458	ENDIF
1459
1460	!
1461	!-- Check number of chosen statistic regions. More than 10 regions are not
1462	!-- allowed, because so far no more than 10 corresponding output files can
1463	!-- be opened (cf. check_open)
1464	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1465	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1466	statistic_regions+1, ' but only 10 regions are allowed'
1467	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1468	ENDIF
1469	IF ( normalizing_region > statistic_regions .OR. &
1470	normalizing_region < 0) THEN
1471	WRITE ( message_string, * ) 'normalizing_region = ', &
1472	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1473	' (value of statistic_regions)'
1474	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1475	ENDIF
1476
1477	!
1478	!-- Check the interval for sorting particles.
1479	!-- Using particles as cloud droplets requires sorting after each timestep.
1480	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1481	dt_sort_particles = 0.0
1482	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1483	'_droplets = .TRUE.'
1484	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1485	ENDIF
1486
1487	!
1488	!-- Set the default intervals for data output, if necessary
1489	!-- NOTE: dt_dosp has already been set in package_parin
1490	IF ( dt_data_output /= 9999999.9 ) THEN
1491	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1492	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1493	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1494	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1495	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1496	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1497	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1498	DO mid = 1, 20
1499	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1500	ENDDO
1501	ENDIF
1502
1503	!
1504	!-- Set the default skip time intervals for data output, if necessary
1505	IF ( skip_time_dopr == 9999999.9 ) &
1506	skip_time_dopr = skip_time_data_output
1507	IF ( skip_time_dosp == 9999999.9 ) &
1508	skip_time_dosp = skip_time_data_output
1509	IF ( skip_time_do2d_xy == 9999999.9 ) &
1510	skip_time_do2d_xy = skip_time_data_output
1511	IF ( skip_time_do2d_xz == 9999999.9 ) &
1512	skip_time_do2d_xz = skip_time_data_output
1513	IF ( skip_time_do2d_yz == 9999999.9 ) &
1514	skip_time_do2d_yz = skip_time_data_output
1515	IF ( skip_time_do3d == 9999999.9 ) &
1516	skip_time_do3d = skip_time_data_output
1517	IF ( skip_time_data_output_av == 9999999.9 ) &
1518	skip_time_data_output_av = skip_time_data_output
1519	DO mid = 1, 20
1520	IF ( skip_time_domask(mid) == 9999999.9 ) &
1521	skip_time_domask(mid) = skip_time_data_output
1522	ENDDO
1523
1524	!
1525	!-- Check the average intervals (first for 3d-data, then for profiles and
1526	!-- spectra)
1527	IF ( averaging_interval > dt_data_output_av ) THEN
1528	WRITE( message_string, * ) 'averaging_interval = ', &
1529	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1530	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1531	ENDIF
1532
1533	IF ( averaging_interval_pr == 9999999.9 ) THEN
1534	averaging_interval_pr = averaging_interval
1535	ENDIF
1536
1537	IF ( averaging_interval_pr > dt_dopr ) THEN
1538	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1539	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1540	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1541	ENDIF
1542
1543	IF ( averaging_interval_sp == 9999999.9 ) THEN
1544	averaging_interval_sp = averaging_interval
1545	ENDIF
1546
1547	IF ( averaging_interval_sp > dt_dosp ) THEN
1548	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1549	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1550	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1551	ENDIF
1552
1553	!
1554	!-- Set the default interval for profiles entering the temporal average
1555	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1556	dt_averaging_input_pr = dt_averaging_input
1557	ENDIF
1558
1559	!
1560	!-- Set the default interval for the output of timeseries to a reasonable
1561	!-- value (tries to minimize the number of calls of flow_statistics)
1562	IF ( dt_dots == 9999999.9 ) THEN
1563	IF ( averaging_interval_pr == 0.0 ) THEN
1564	dt_dots = MIN( dt_run_control, dt_dopr )
1565	ELSE
1566	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1567	ENDIF
1568	ENDIF
1569
1570	!
1571	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1572	IF ( dt_averaging_input > averaging_interval ) THEN
1573	WRITE( message_string, * ) 'dt_averaging_input = ', &
1574	dt_averaging_input, ' must be <= averaging_interval = ', &
1575	averaging_interval
1576	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1577	ENDIF
1578
1579	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1580	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1581	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1582	averaging_interval_pr
1583	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1584	ENDIF
1585
1586	!
1587	!-- Set the default value for the integration interval of precipitation amount
1588	IF ( precipitation ) THEN
1589	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1590	precipitation_amount_interval = dt_do2d_xy
1591	ELSE
1592	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1593	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1594	precipitation_amount_interval, ' must not be larger than ', &
1595	'dt_do2d_xy = ', dt_do2d_xy
1596	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1597	ENDIF
1598	ENDIF
1599	ENDIF
1600
1601	!
1602	!-- Determine the number of output profiles and check whether they are
1603	!-- permissible
1604	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1605
1606	dopr_n = dopr_n + 1
1607	i = dopr_n
1608
1609	!
1610	!-- Determine internal profile number (for hom, homs)
1611	!-- and store height levels
1612	SELECT CASE ( TRIM( data_output_pr(i) ) )
1613
1614	CASE ( 'u', '#u' )
1615	dopr_index(i) = 1
1616	dopr_unit(i) = 'm/s'
1617	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1618	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1619	dopr_initial_index(i) = 5
1620	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1621	data_output_pr(i) = data_output_pr(i)(2:)
1622	ENDIF
1623
1624	CASE ( 'v', '#v' )
1625	dopr_index(i) = 2
1626	dopr_unit(i) = 'm/s'
1627	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1628	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1629	dopr_initial_index(i) = 6
1630	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1631	data_output_pr(i) = data_output_pr(i)(2:)
1632	ENDIF
1633
1634	CASE ( 'w' )
1635	dopr_index(i) = 3
1636	dopr_unit(i) = 'm/s'
1637	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1638
1639	CASE ( 'pt', '#pt' )
1640	IF ( .NOT. cloud_physics ) THEN
1641	dopr_index(i) = 4
1642	dopr_unit(i) = 'K'
1643	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1644	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1645	dopr_initial_index(i) = 7
1646	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1647	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1648	data_output_pr(i) = data_output_pr(i)(2:)
1649	ENDIF
1650	ELSE
1651	dopr_index(i) = 43
1652	dopr_unit(i) = 'K'
1653	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1654	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1655	dopr_initial_index(i) = 28
1656	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1657	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1658	data_output_pr(i) = data_output_pr(i)(2:)
1659	ENDIF
1660	ENDIF
1661
1662	CASE ( 'e' )
1663	dopr_index(i) = 8
1664	dopr_unit(i) = 'm2/s2'
1665	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1666	hom(nzb,2,8,:) = 0.0
1667
1668	CASE ( 'km', '#km' )
1669	dopr_index(i) = 9
1670	dopr_unit(i) = 'm2/s'
1671	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1672	hom(nzb,2,9,:) = 0.0
1673	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1674	dopr_initial_index(i) = 23
1675	hom(:,2,23,:) = hom(:,2,9,:)
1676	data_output_pr(i) = data_output_pr(i)(2:)
1677	ENDIF
1678
1679	CASE ( 'kh', '#kh' )
1680	dopr_index(i) = 10
1681	dopr_unit(i) = 'm2/s'
1682	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1683	hom(nzb,2,10,:) = 0.0
1684	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1685	dopr_initial_index(i) = 24
1686	hom(:,2,24,:) = hom(:,2,10,:)
1687	data_output_pr(i) = data_output_pr(i)(2:)
1688	ENDIF
1689
1690	CASE ( 'l', '#l' )
1691	dopr_index(i) = 11
1692	dopr_unit(i) = 'm'
1693	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1694	hom(nzb,2,11,:) = 0.0
1695	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1696	dopr_initial_index(i) = 25
1697	hom(:,2,25,:) = hom(:,2,11,:)
1698	data_output_pr(i) = data_output_pr(i)(2:)
1699	ENDIF
1700
1701	CASE ( 'w"u"' )
1702	dopr_index(i) = 12
1703	dopr_unit(i) = 'm2/s2'
1704	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1705	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1706
1707	CASE ( 'wu' )
1708	dopr_index(i) = 13
1709	dopr_unit(i) = 'm2/s2'
1710	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1711
1712	CASE ( 'w"v"' )
1713	dopr_index(i) = 14
1714	dopr_unit(i) = 'm2/s2'
1715	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1716	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1717
1718	CASE ( 'wv' )
1719	dopr_index(i) = 15
1720	dopr_unit(i) = 'm2/s2'
1721	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1722
1723	CASE ( 'w"pt"' )
1724	dopr_index(i) = 16
1725	dopr_unit(i) = 'K m/s'
1726	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1727
1728	CASE ( 'wpt' )
1729	dopr_index(i) = 17
1730	dopr_unit(i) = 'K m/s'
1731	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1732
1733	CASE ( 'wpt' )
1734	dopr_index(i) = 18
1735	dopr_unit(i) = 'K m/s'
1736	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1737
1738	CASE ( 'wu' )
1739	dopr_index(i) = 19
1740	dopr_unit(i) = 'm2/s2'
1741	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1742	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1743
1744	CASE ( 'wv' )
1745	dopr_index(i) = 20
1746	dopr_unit(i) = 'm2/s2'
1747	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1748	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1749
1750	CASE ( 'wptBC' )
1751	dopr_index(i) = 21
1752	dopr_unit(i) = 'K m/s'
1753	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1754
1755	CASE ( 'wptBC' )
1756	dopr_index(i) = 22
1757	dopr_unit(i) = 'K m/s'
1758	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1759
1760	CASE ( 'sa', '#sa' )
1761	IF ( .NOT. ocean ) THEN
1762	message_string = 'data_output_pr = ' // &
1763	TRIM( data_output_pr(i) ) // ' is not imp' // &
1764	'lemented for ocean = .FALSE.'
1765	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1766	ELSE
1767	dopr_index(i) = 23
1768	dopr_unit(i) = 'psu'
1769	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1770	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1771	dopr_initial_index(i) = 26
1772	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1773	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1774	data_output_pr(i) = data_output_pr(i)(2:)
1775	ENDIF
1776	ENDIF
1777
1778	CASE ( 'u*2' )
1779	dopr_index(i) = 30
1780	dopr_unit(i) = 'm2/s2'
1781	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1782
1783	CASE ( 'v*2' )
1784	dopr_index(i) = 31
1785	dopr_unit(i) = 'm2/s2'
1786	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1787
1788	CASE ( 'w*2' )
1789	dopr_index(i) = 32
1790	dopr_unit(i) = 'm2/s2'
1791	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1792
1793	CASE ( 'pt*2' )
1794	dopr_index(i) = 33
1795	dopr_unit(i) = 'K2'
1796	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1797
1798	CASE ( 'e*' )
1799	dopr_index(i) = 34
1800	dopr_unit(i) = 'm2/s2'
1801	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1802
1803	CASE ( 'w2pt' )
1804	dopr_index(i) = 35
1805	dopr_unit(i) = 'K m2/s2'
1806	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1807
1808	CASE ( 'wpt2' )
1809	dopr_index(i) = 36
1810	dopr_unit(i) = 'K2 m/s'
1811	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1812
1813	CASE ( 'we' )
1814	dopr_index(i) = 37
1815	dopr_unit(i) = 'm3/s3'
1816	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1817
1818	CASE ( 'w*3' )
1819	dopr_index(i) = 38
1820	dopr_unit(i) = 'm3/s3'
1821	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1822
1823	CASE ( 'Sw' )
1824	dopr_index(i) = 39
1825	dopr_unit(i) = 'none'
1826	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1827
1828	CASE ( 'p' )
1829	dopr_index(i) = 40
1830	dopr_unit(i) = 'Pa'
1831	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1832
1833	CASE ( 'q', '#q' )
1834	IF ( .NOT. humidity ) THEN
1835	message_string = 'data_output_pr = ' // &
1836	TRIM( data_output_pr(i) ) // ' is not imp' // &
1837	'lemented for humidity = .FALSE.'
1838	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1839	ELSE
1840	dopr_index(i) = 41
1841	dopr_unit(i) = 'kg/kg'
1842	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1843	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1844	dopr_initial_index(i) = 26
1845	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1846	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1847	data_output_pr(i) = data_output_pr(i)(2:)
1848	ENDIF
1849	ENDIF
1850
1851	CASE ( 's', '#s' )
1852	IF ( .NOT. passive_scalar ) THEN
1853	message_string = 'data_output_pr = ' // &
1854	TRIM( data_output_pr(i) ) // ' is not imp' // &
1855	'lemented for passive_scalar = .FALSE.'
1856	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1857	ELSE
1858	dopr_index(i) = 41
1859	dopr_unit(i) = 'kg/m3'
1860	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1861	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1862	dopr_initial_index(i) = 26
1863	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1864	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1865	data_output_pr(i) = data_output_pr(i)(2:)
1866	ENDIF
1867	ENDIF
1868
1869	CASE ( 'qv', '#qv' )
1870	IF ( .NOT. cloud_physics ) THEN
1871	dopr_index(i) = 41
1872	dopr_unit(i) = 'kg/kg'
1873	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1874	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1875	dopr_initial_index(i) = 26
1876	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1877	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1878	data_output_pr(i) = data_output_pr(i)(2:)
1879	ENDIF
1880	ELSE
1881	dopr_index(i) = 42
1882	dopr_unit(i) = 'kg/kg'
1883	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1884	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1885	dopr_initial_index(i) = 27
1886	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1887	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1888	data_output_pr(i) = data_output_pr(i)(2:)
1889	ENDIF
1890	ENDIF
1891
1892	CASE ( 'lpt', '#lpt' )
1893	IF ( .NOT. cloud_physics ) THEN
1894	message_string = 'data_output_pr = ' // &
1895	TRIM( data_output_pr(i) ) // ' is not imp' // &
1896	'lemented for cloud_physics = .FALSE.'
1897	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1898	ELSE
1899	dopr_index(i) = 4
1900	dopr_unit(i) = 'K'
1901	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1902	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1903	dopr_initial_index(i) = 7
1904	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1905	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1906	data_output_pr(i) = data_output_pr(i)(2:)
1907	ENDIF
1908	ENDIF
1909
1910	CASE ( 'vpt', '#vpt' )
1911	dopr_index(i) = 44
1912	dopr_unit(i) = 'K'
1913	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1914	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1915	dopr_initial_index(i) = 29
1916	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1917	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1918	data_output_pr(i) = data_output_pr(i)(2:)
1919	ENDIF
1920
1921	CASE ( 'w"vpt"' )
1922	dopr_index(i) = 45
1923	dopr_unit(i) = 'K m/s'
1924	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1925
1926	CASE ( 'wvpt' )
1927	dopr_index(i) = 46
1928	dopr_unit(i) = 'K m/s'
1929	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1930
1931	CASE ( 'wvpt' )
1932	dopr_index(i) = 47
1933	dopr_unit(i) = 'K m/s'
1934	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1935
1936	CASE ( 'w"q"' )
1937	IF ( .NOT. humidity ) THEN
1938	message_string = 'data_output_pr = ' // &
1939	TRIM( data_output_pr(i) ) // ' is not imp' // &
1940	'lemented for humidity = .FALSE.'
1941	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1942	ELSE
1943	dopr_index(i) = 48
1944	dopr_unit(i) = 'kg/kg m/s'
1945	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1946	ENDIF
1947
1948	CASE ( 'wq' )
1949	IF ( .NOT. humidity ) THEN
1950	message_string = 'data_output_pr = ' // &
1951	TRIM( data_output_pr(i) ) // ' is not imp' // &
1952	'lemented for humidity = .FALSE.'
1953	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1954	ELSE
1955	dopr_index(i) = 49
1956	dopr_unit(i) = 'kg/kg m/s'
1957	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1958	ENDIF
1959
1960	CASE ( 'wq' )
1961	IF ( .NOT. humidity ) THEN
1962	message_string = 'data_output_pr = ' // &
1963	TRIM( data_output_pr(i) ) // ' is not imp' // &
1964	'lemented for humidity = .FALSE.'
1965	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1966	ELSE
1967	dopr_index(i) = 50
1968	dopr_unit(i) = 'kg/kg m/s'
1969	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1970	ENDIF
1971
1972	CASE ( 'w"s"' )
1973	IF ( .NOT. passive_scalar ) THEN
1974	message_string = 'data_output_pr = ' // &
1975	TRIM( data_output_pr(i) ) // ' is not imp' // &
1976	'lemented for passive_scalar = .FALSE.'
1977	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1978	ELSE
1979	dopr_index(i) = 48
1980	dopr_unit(i) = 'kg/m3 m/s'
1981	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1982	ENDIF
1983
1984	CASE ( 'ws' )
1985	IF ( .NOT. passive_scalar ) THEN
1986	message_string = 'data_output_pr = ' // &
1987	TRIM( data_output_pr(i) ) // ' is not imp' // &
1988	'lemented for passive_scalar = .FALSE.'
1989	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1990	ELSE
1991	dopr_index(i) = 49
1992	dopr_unit(i) = 'kg/m3 m/s'
1993	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1994	ENDIF
1995
1996	CASE ( 'ws' )
1997	IF ( .NOT. passive_scalar ) THEN
1998	message_string = 'data_output_pr = ' // &
1999	TRIM( data_output_pr(i) ) // ' is not imp' // &
2000	'lemented for passive_scalar = .FALSE.'
2001	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2002	ELSE
2003	dopr_index(i) = 50
2004	dopr_unit(i) = 'kg/m3 m/s'
2005	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2006	ENDIF
2007
2008	CASE ( 'w"qv"' )
2009	IF ( humidity .AND. .NOT. cloud_physics ) &
2010	THEN
2011	dopr_index(i) = 48
2012	dopr_unit(i) = 'kg/kg m/s'
2013	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2014	ELSEIF( humidity .AND. cloud_physics ) THEN
2015	dopr_index(i) = 51
2016	dopr_unit(i) = 'kg/kg m/s'
2017	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2018	ELSE
2019	message_string = 'data_output_pr = ' // &
2020	TRIM( data_output_pr(i) ) // ' is not imp' // &
2021	'lemented for cloud_physics = .FALSE. an&' // &
2022	'd humidity = .FALSE.'
2023	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2024	ENDIF
2025
2026	CASE ( 'wqv' )
2027	IF ( humidity .AND. .NOT. cloud_physics ) &
2028	THEN
2029	dopr_index(i) = 49
2030	dopr_unit(i) = 'kg/kg m/s'
2031	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2032	ELSEIF( humidity .AND. cloud_physics ) THEN
2033	dopr_index(i) = 52
2034	dopr_unit(i) = 'kg/kg m/s'
2035	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2036	ELSE
2037	message_string = 'data_output_pr = ' // &
2038	TRIM( data_output_pr(i) ) // ' is not imp' // &
2039	'lemented for cloud_physics = .FALSE. an&' // &
2040	'd humidity = .FALSE.'
2041	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2042	ENDIF
2043
2044	CASE ( 'wqv' )
2045	IF ( humidity .AND. .NOT. cloud_physics ) &
2046	THEN
2047	dopr_index(i) = 50
2048	dopr_unit(i) = 'kg/kg m/s'
2049	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2050	ELSEIF( humidity .AND. cloud_physics ) THEN
2051	dopr_index(i) = 53
2052	dopr_unit(i) = 'kg/kg m/s'
2053	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2054	ELSE
2055	message_string = 'data_output_pr = ' // &
2056	TRIM( data_output_pr(i) ) // ' is not imp' // &
2057	'lemented for cloud_physics = .FALSE. an&' // &
2058	'd humidity = .FALSE.'
2059	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2060	ENDIF
2061
2062	CASE ( 'ql' )
2063	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2064	message_string = 'data_output_pr = ' // &
2065	TRIM( data_output_pr(i) ) // ' is not imp' // &
2066	'lemented for cloud_physics = .FALSE. or' // &
2067	'&cloud_droplets = .FALSE.'
2068	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2069	ELSE
2070	dopr_index(i) = 54
2071	dopr_unit(i) = 'kg/kg'
2072	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2073	ENDIF
2074
2075	CASE ( 'wuu*/dz' )
2076	dopr_index(i) = 55
2077	dopr_unit(i) = 'm2/s3'
2078	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2079
2080	CASE ( 'wp/dz' )
2081	dopr_index(i) = 56
2082	dopr_unit(i) = 'm2/s3'
2083	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2084
2085	CASE ( 'w"e/dz' )
2086	dopr_index(i) = 57
2087	dopr_unit(i) = 'm2/s3'
2088	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2089
2090	CASE ( 'u"pt"' )
2091	dopr_index(i) = 58
2092	dopr_unit(i) = 'K m/s'
2093	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2094
2095	CASE ( 'upt' )
2096	dopr_index(i) = 59
2097	dopr_unit(i) = 'K m/s'
2098	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2099
2100	CASE ( 'upt_t' )
2101	dopr_index(i) = 60
2102	dopr_unit(i) = 'K m/s'
2103	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2104
2105	CASE ( 'v"pt"' )
2106	dopr_index(i) = 61
2107	dopr_unit(i) = 'K m/s'
2108	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2109
2110	CASE ( 'vpt' )
2111	dopr_index(i) = 62
2112	dopr_unit(i) = 'K m/s'
2113	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2114
2115	CASE ( 'vpt_t' )
2116	dopr_index(i) = 63
2117	dopr_unit(i) = 'K m/s'
2118	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2119
2120	CASE ( 'rho' )
2121	IF ( .NOT. ocean ) THEN
2122	message_string = 'data_output_pr = ' // &
2123	TRIM( data_output_pr(i) ) // ' is not imp' // &
2124	'lemented for ocean = .FALSE.'
2125	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2126	ELSE
2127	dopr_index(i) = 64
2128	dopr_unit(i) = 'kg/m3'
2129	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2130	ENDIF
2131
2132	CASE ( 'w"sa"' )
2133	IF ( .NOT. ocean ) THEN
2134	message_string = 'data_output_pr = ' // &
2135	TRIM( data_output_pr(i) ) // ' is not imp' // &
2136	'lemented for ocean = .FALSE.'
2137	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2138	ELSE
2139	dopr_index(i) = 65
2140	dopr_unit(i) = 'psu m/s'
2141	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2142	ENDIF
2143
2144	CASE ( 'wsa' )
2145	IF ( .NOT. ocean ) THEN
2146	message_string = 'data_output_pr = ' // &
2147	TRIM( data_output_pr(i) ) // ' is not imp' // &
2148	'lemented for ocean = .FALSE.'
2149	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2150	ELSE
2151	dopr_index(i) = 66
2152	dopr_unit(i) = 'psu m/s'
2153	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2154	ENDIF
2155
2156	CASE ( 'wsa' )
2157	IF ( .NOT. ocean ) THEN
2158	message_string = 'data_output_pr = ' // &
2159	TRIM( data_output_pr(i) ) // ' is not imp' // &
2160	'lemented for ocean = .FALSE.'
2161	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2162	ELSE
2163	dopr_index(i) = 67
2164	dopr_unit(i) = 'psu m/s'
2165	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2166	ENDIF
2167
2168	CASE ( 'wp' )
2169	dopr_index(i) = 68
2170	dopr_unit(i) = 'm3/s3'
2171	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2172
2173	CASE ( 'w"e' )
2174	dopr_index(i) = 69
2175	dopr_unit(i) = 'm3/s3'
2176	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2177
2178	CASE ( 'q*2' )
2179	IF ( .NOT. humidity ) THEN
2180	message_string = 'data_output_pr = ' // &
2181	TRIM( data_output_pr(i) ) // ' is not imp' // &
2182	'lemented for humidity = .FALSE.'
2183	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2184	ELSE
2185	dopr_index(i) = 70
2186	dopr_unit(i) = 'kg2/kg2'
2187	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2188	ENDIF
2189
2190	CASE ( 'prho' )
2191	IF ( .NOT. ocean ) THEN
2192	message_string = 'data_output_pr = ' // &
2193	TRIM( data_output_pr(i) ) // ' is not imp' // &
2194	'lemented for ocean = .FALSE.'
2195	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2196	ELSE
2197	dopr_index(i) = 71
2198	dopr_unit(i) = 'kg/m3'
2199	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2200	ENDIF
2201
2202	CASE ( 'hyp' )
2203	dopr_index(i) = 72
2204	dopr_unit(i) = 'kPa'
2205	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2206
2207	CASE DEFAULT
2208
2209	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2210
2211	IF ( unit == 'illegal' ) THEN
2212	IF ( data_output_pr_user(1) /= ' ' ) THEN
2213	message_string = 'illegal value for data_output_pr or ' // &
2214	'data_output_pr_user = "' // &
2215	TRIM( data_output_pr(i) ) // '"'
2216	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2217	ELSE
2218	message_string = 'illegal value for data_output_pr = "' // &
2219	TRIM( data_output_pr(i) ) // '"'
2220	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2221	ENDIF
2222	ENDIF
2223
2224	END SELECT
2225	!
2226	!-- Check to which of the predefined coordinate systems the profile belongs
2227	DO k = 1, crmax
2228	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2229	/=0 ) &
2230	THEN
2231	dopr_crossindex(i) = k
2232	EXIT
2233	ENDIF
2234	ENDDO
2235	!
2236	!-- Generate the text for the labels of the PROFIL output file. "-characters
2237	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2238	!-- control characters
2239	dopr_label(i) = data_output_pr(i)
2240	position = INDEX( dopr_label(i) , '"' )
2241	DO WHILE ( position /= 0 )
2242	dopr_label(i)(position:position) = ''''
2243	position = INDEX( dopr_label(i) , '"' )
2244	ENDDO
2245
2246	ENDDO
2247
2248	!
2249	!-- y-value range of the coordinate system (PROFIL).
2250	!-- x-value range determined in plot_1d.
2251	IF ( .NOT. ocean ) THEN
2252	cross_uymin = 0.0
2253	IF ( z_max_do1d == -1.0 ) THEN
2254	cross_uymax = zu(nzt+1)
2255	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2256	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2257	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2258	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2259	ELSE
2260	cross_uymax = z_max_do1d
2261	ENDIF
2262	ENDIF
2263
2264	!
2265	!-- Check whether the chosen normalizing factor for the coordinate systems is
2266	!-- permissible
2267	DO i = 1, crmax
2268	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2269
2270	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2271	j = 0
2272
2273	CASE DEFAULT
2274	message_string = 'unknown normalization method cross_normali' // &
2275	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2276	'"'
2277	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2278
2279	END SELECT
2280	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2281
2282	CASE ( '', 'z_i' )
2283	j = 0
2284
2285	CASE DEFAULT
2286	message_string = 'unknown normalization method cross_normali' // &
2287	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2288	'"'
2289	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2290
2291	END SELECT
2292	ENDDO
2293	!
2294	!-- Check normalized y-value range of the coordinate system (PROFIL)
2295	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2296	THEN
2297	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2298	z_max_do1d_normalized, ' must be >= 0.0'
2299	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2300	ENDIF
2301
2302
2303	!
2304	!-- Append user-defined data output variables to the standard data output
2305	IF ( data_output_user(1) /= ' ' ) THEN
2306	i = 1
2307	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2308	i = i + 1
2309	ENDDO
2310	j = 1
2311	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2312	IF ( i > 100 ) THEN
2313	message_string = 'number of output quantitities given by data' // &
2314	'_output and data_output_user exceeds the limit of 100'
2315	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2316	ENDIF
2317	data_output(i) = data_output_user(j)
2318	i = i + 1
2319	j = j + 1
2320	ENDDO
2321	ENDIF
2322
2323	!
2324	!-- Check and set steering parameters for 2d/3d data output and averaging
2325	i = 1
2326	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2327	!
2328	!-- Check for data averaging
2329	ilen = LEN_TRIM( data_output(i) )
2330	j = 0 ! no data averaging
2331	IF ( ilen > 3 ) THEN
2332	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2333	j = 1 ! data averaging
2334	data_output(i) = data_output(i)(1:ilen-3)
2335	ENDIF
2336	ENDIF
2337	!
2338	!-- Check for cross section or volume data
2339	ilen = LEN_TRIM( data_output(i) )
2340	k = 0 ! 3d data
2341	var = data_output(i)(1:ilen)
2342	IF ( ilen > 3 ) THEN
2343	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2344	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2345	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2346	k = 1 ! 2d data
2347	var = data_output(i)(1:ilen-3)
2348	ENDIF
2349	ENDIF
2350	!
2351	!-- Check for allowed value and set units
2352	SELECT CASE ( TRIM( var ) )
2353
2354	CASE ( 'e' )
2355	IF ( constant_diffusion ) THEN
2356	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2357	'res constant_diffusion = .FALSE.'
2358	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2359	ENDIF
2360	unit = 'm2/s2'
2361
2362	CASE ( 'pc', 'pr' )
2363	IF ( .NOT. particle_advection ) THEN
2364	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2365	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2366	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2367	ENDIF
2368	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2369	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2370
2371	CASE ( 'q', 'vpt' )
2372	IF ( .NOT. humidity ) THEN
2373	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2374	'res humidity = .TRUE.'
2375	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2376	ENDIF
2377	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2378	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2379
2380	CASE ( 'ql' )
2381	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2382	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2383	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2384	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2385	ENDIF
2386	unit = 'kg/kg'
2387
2388	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2389	IF ( .NOT. cloud_droplets ) THEN
2390	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2391	'res cloud_droplets = .TRUE.'
2392	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2393	ENDIF
2394	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2395	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2396	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2397
2398	CASE ( 'qv' )
2399	IF ( .NOT. cloud_physics ) THEN
2400	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2401	'res cloud_physics = .TRUE.'
2402	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2403	ENDIF
2404	unit = 'kg/kg'
2405
2406	CASE ( 'rho' )
2407	IF ( .NOT. ocean ) THEN
2408	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2409	'res ocean = .TRUE.'
2410	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2411	ENDIF
2412	unit = 'kg/m3'
2413
2414	CASE ( 's' )
2415	IF ( .NOT. passive_scalar ) THEN
2416	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2417	'res passive_scalar = .TRUE.'
2418	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2419	ENDIF
2420	unit = 'conc'
2421
2422	CASE ( 'sa' )
2423	IF ( .NOT. ocean ) THEN
2424	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2425	'res ocean = .TRUE.'
2426	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2427	ENDIF
2428	unit = 'psu'
2429
2430	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
2431	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2432	message_string = 'illegal value for data_output: "' // &
2433	TRIM( var ) // '" & only 2d-horizontal ' // &
2434	'cross sections are allowed for this value'
2435	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2436	ENDIF
2437	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2438	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2439	'res cloud_physics = .TRUE.'
2440	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2441	ENDIF
2442	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2443	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2444	'res precipitation = .TRUE.'
2445	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2446	ENDIF
2447	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2448	message_string = 'temporal averaging of precipitation ' // &
2449	'amount "' // TRIM( var ) // '" is not possible'
2450	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2451	ENDIF
2452	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2453	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2454	'res precipitation = .TRUE.'
2455	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2456	ENDIF
2457	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2458	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2459	'res humidity = .TRUE.'
2460	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2461	ENDIF
2462
2463	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2464	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2465	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2466	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2467	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2468	IF ( TRIM( var ) == 't*' ) unit = 'K'
2469	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2470	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2471
2472
2473	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2474	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2475	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2476	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2477	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2478	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2479	CONTINUE
2480
2481	CASE DEFAULT
2482	CALL user_check_data_output( var, unit )
2483
2484	IF ( unit == 'illegal' ) THEN
2485	IF ( data_output_user(1) /= ' ' ) THEN
2486	message_string = 'illegal value for data_output or ' // &
2487	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2488	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2489	ELSE
2490	message_string = 'illegal value for data_output =' // &
2491	TRIM( data_output(i) ) // '"'
2492	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2493	ENDIF
2494	ENDIF
2495
2496	END SELECT
2497	!
2498	!-- Set the internal steering parameters appropriately
2499	IF ( k == 0 ) THEN
2500	do3d_no(j) = do3d_no(j) + 1
2501	do3d(j,do3d_no(j)) = data_output(i)
2502	do3d_unit(j,do3d_no(j)) = unit
2503	ELSE
2504	do2d_no(j) = do2d_no(j) + 1
2505	do2d(j,do2d_no(j)) = data_output(i)
2506	do2d_unit(j,do2d_no(j)) = unit
2507	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2508	data_output_xy(j) = .TRUE.
2509	ENDIF
2510	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2511	data_output_xz(j) = .TRUE.
2512	ENDIF
2513	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2514	data_output_yz(j) = .TRUE.
2515	ENDIF
2516	ENDIF
2517
2518	IF ( j == 1 ) THEN
2519	!
2520	!-- Check, if variable is already subject to averaging
2521	found = .FALSE.
2522	DO k = 1, doav_n
2523	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2524	ENDDO
2525
2526	IF ( .NOT. found ) THEN
2527	doav_n = doav_n + 1
2528	doav(doav_n) = var
2529	ENDIF
2530	ENDIF
2531
2532	i = i + 1
2533	ENDDO
2534
2535	!
2536	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2537	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2538	WRITE( message_string, * ) 'output of averaged quantity "', &
2539	TRIM( doav(1) ), '_av" requires to set a ', &
2540	'non-zero & averaging interval'
2541	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2542	ENDIF
2543
2544	!
2545	!-- Check sectional planes and store them in one shared array
2546	IF ( ANY( section_xy > nz + 1 ) ) THEN
2547	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2548	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2549	ENDIF
2550	IF ( ANY( section_xz > ny + 1 ) ) THEN
2551	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2552	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2553	ENDIF
2554	IF ( ANY( section_yz > nx + 1 ) ) THEN
2555	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2556	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2557	ENDIF
2558	section(:,1) = section_xy
2559	section(:,2) = section_xz
2560	section(:,3) = section_yz
2561
2562	!
2563	!-- Upper plot limit (grid point value) for 1D profiles
2564	IF ( z_max_do1d == -1.0 ) THEN
2565	nz_do1d = nzt+1
2566	ELSE
2567	DO k = nzb+1, nzt+1
2568	nz_do1d = k
2569	IF ( zw(k) > z_max_do1d ) EXIT
2570	ENDDO
2571	ENDIF
2572
2573	!
2574	!-- Upper plot limit for 2D vertical sections
2575	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2576	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2577	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2578	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2579	' (zu(nzt))'
2580	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2581	ENDIF
2582
2583	!
2584	!-- Upper plot limit for 3D arrays
2585	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2586
2587	!
2588	!-- Determine and check accuracy for compressed 3D plot output
2589	IF ( do3d_compress ) THEN
2590	!
2591	!-- Compression only permissible on T3E machines
2592	IF ( host(1:3) /= 't3e' ) THEN
2593	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2594	TRIM( host ) // '"'
2595	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2596	ENDIF
2597
2598	i = 1
2599	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2600
2601	ilen = LEN_TRIM( do3d_comp_prec(i) )
2602	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2603	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2604	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2605	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2606	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2607	ENDIF
2608
2609	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2610	var = do3d_comp_prec(i)(1:ilen-1)
2611
2612	SELECT CASE ( var )
2613
2614	CASE ( 'u' )
2615	j = 1
2616	CASE ( 'v' )
2617	j = 2
2618	CASE ( 'w' )
2619	j = 3
2620	CASE ( 'p' )
2621	j = 4
2622	CASE ( 'pt' )
2623	j = 5
2624
2625	CASE DEFAULT
2626	WRITE( message_string, * ) 'unknown variable "', &
2627	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2628	i, ')'
2629	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2630
2631	END SELECT
2632
2633	plot_3d_precision(j)%precision = prec
2634	i = i + 1
2635
2636	ENDDO
2637	ENDIF
2638
2639	!
2640	!-- Check the data output format(s)
2641	IF ( data_output_format(1) == ' ' ) THEN
2642	!
2643	!-- Default value
2644	netcdf_output = .TRUE.
2645	ELSE
2646	i = 1
2647	DO WHILE ( data_output_format(i) /= ' ' )
2648
2649	SELECT CASE ( data_output_format(i) )
2650
2651	CASE ( 'netcdf' )
2652	netcdf_output = .TRUE.
2653	CASE ( 'iso2d' )
2654	iso2d_output = .TRUE.
2655	CASE ( 'profil' )
2656	profil_output = .TRUE.
2657	CASE ( 'avs' )
2658	avs_output = .TRUE.
2659
2660	CASE DEFAULT
2661	message_string = 'unknown value for data_output_format "' // &
2662	TRIM( data_output_format(i) ) // '"'
2663	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2664
2665	END SELECT
2666
2667	i = i + 1
2668	IF ( i > 10 ) EXIT
2669
2670	ENDDO
2671
2672	ENDIF
2673
2674	!
2675	!-- Check mask conditions
2676	IF ( masks < 0 .OR. masks > max_masks ) THEN
2677	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2678	'<= ', max_masks, ' (=max_masks)'
2679	CALL message( 'check_parameters', 'PA9998', 1, 2, 0, 6, 0 )
2680	ENDIF
2681	IF ( masks > 0 ) THEN
2682	mask_scale(1) = mask_scale_x
2683	mask_scale(2) = mask_scale_y
2684	mask_scale(3) = mask_scale_z
2685	IF ( ANY( mask_scale <= 0.0 ) ) THEN
2686	WRITE( message_string, * ) &
2687	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2688	'must be > 0.0'
2689	CALL message( 'check_parameters', 'PA9998', 1, 2, 0, 6, 0 )
2690	ENDIF
2691	!
2692	!-- Generate masks for masked data output
2693	CALL init_masks
2694	ENDIF
2695
2696	!
2697	!-- Check the NetCDF data format
2698	IF ( netcdf_data_format > 2 ) THEN
2699	#if defined( __netcdf4 )
2700	CONTINUE
2701	#else
2702	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
2703	'cpp-directive __netcdf4 given & switch ' // &
2704	'back to 64-bit offset format'
2705	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2706	netcdf_data_format = 2
2707	#endif
2708	ENDIF
2709
2710	!
2711	!-- Check netcdf precison
2712	ldum = .FALSE.
2713	CALL define_netcdf_header( 'ch', ldum, 0 )
2714
2715	!
2716	!-- Check, whether a constant diffusion coefficient shall be used
2717	IF ( km_constant /= -1.0 ) THEN
2718	IF ( km_constant < 0.0 ) THEN
2719	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2720	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2721	ELSE
2722	IF ( prandtl_number < 0.0 ) THEN
2723	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2724	' < 0.0'
2725	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2726	ENDIF
2727	constant_diffusion = .TRUE.
2728
2729	IF ( prandtl_layer ) THEN
2730	message_string = 'prandtl_layer is not allowed with fixed ' // &
2731	'value of km'
2732	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2733	ENDIF
2734	ENDIF
2735	ENDIF
2736
2737	!
2738	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2739	!-- for the horizontal diffusivity used within the outflow damping layer,
2740	!-- and check/set the width of the damping layer
2741	IF ( bc_lr /= 'cyclic' ) THEN
2742	IF ( km_damp_max == -1.0 ) THEN
2743	km_damp_max = 0.5 * dx
2744	ENDIF
2745	IF ( outflow_damping_width == -1.0 ) THEN
2746	outflow_damping_width = MIN( 20, nx/2 )
2747	ENDIF
2748	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2749	message_string = 'outflow_damping width out of range'
2750	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2751	ENDIF
2752	ENDIF
2753
2754	IF ( bc_ns /= 'cyclic' ) THEN
2755	IF ( km_damp_max == -1.0 ) THEN
2756	km_damp_max = 0.5 * dy
2757	ENDIF
2758	IF ( outflow_damping_width == -1.0 ) THEN
2759	outflow_damping_width = MIN( 20, ny/2 )
2760	ENDIF
2761	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2762	message_string = 'outflow_damping width out of range'
2763	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2764	ENDIF
2765	ENDIF
2766
2767	!
2768	!-- Check value range for rif
2769	IF ( rif_min >= rif_max ) THEN
2770	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2771	'than rif_max = ', rif_max
2772	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2773	ENDIF
2774
2775	!
2776	!-- Determine upper and lower hight level indices for random perturbations
2777	IF ( disturbance_level_b == -9999999.9 ) THEN
2778	IF ( ocean ) THEN
2779	disturbance_level_b = zu((nzt*2)/3)
2780	disturbance_level_ind_b = ( nzt * 2 ) / 3
2781	ELSE
2782	disturbance_level_b = zu(nzb+3)
2783	disturbance_level_ind_b = nzb + 3
2784	ENDIF
2785	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2786	WRITE( message_string, * ) 'disturbance_level_b = ', &
2787	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2788	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2789	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2790	WRITE( message_string, * ) 'disturbance_level_b = ', &
2791	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2792	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2793	ELSE
2794	DO k = 3, nzt-2
2795	IF ( disturbance_level_b <= zu(k) ) THEN
2796	disturbance_level_ind_b = k
2797	EXIT
2798	ENDIF
2799	ENDDO
2800	ENDIF
2801
2802	IF ( disturbance_level_t == -9999999.9 ) THEN
2803	IF ( ocean ) THEN
2804	disturbance_level_t = zu(nzt-3)
2805	disturbance_level_ind_t = nzt - 3
2806	ELSE
2807	disturbance_level_t = zu(nzt/3)
2808	disturbance_level_ind_t = nzt / 3
2809	ENDIF
2810	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2811	WRITE( message_string, * ) 'disturbance_level_t = ', &
2812	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2813	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2814	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2815	WRITE( message_string, * ) 'disturbance_level_t = ', &
2816	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2817	disturbance_level_b
2818	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2819	ELSE
2820	DO k = 3, nzt-2
2821	IF ( disturbance_level_t <= zu(k) ) THEN
2822	disturbance_level_ind_t = k
2823	EXIT
2824	ENDIF
2825	ENDDO
2826	ENDIF
2827
2828	!
2829	!-- Check again whether the levels determined this way are ok.
2830	!-- Error may occur at automatic determination and too few grid points in
2831	!-- z-direction.
2832	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2833	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2834	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2835	disturbance_level_b
2836	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2837	ENDIF
2838
2839	!
2840	!-- Determine the horizontal index range for random perturbations.
2841	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2842	!-- near the inflow and the perturbation area is further limited to ...(1)
2843	!-- after the initial phase of the flow.
2844	dist_nxl = 0; dist_nxr = nx
2845	dist_nys = 0; dist_nyn = ny
2846	IF ( bc_lr /= 'cyclic' ) THEN
2847	IF ( inflow_disturbance_begin == -1 ) THEN
2848	inflow_disturbance_begin = MIN( 10, nx/2 )
2849	ENDIF
2850	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2851	THEN
2852	message_string = 'inflow_disturbance_begin out of range'
2853	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2854	ENDIF
2855	IF ( inflow_disturbance_end == -1 ) THEN
2856	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2857	ENDIF
2858	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2859	THEN
2860	message_string = 'inflow_disturbance_end out of range'
2861	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2862	ENDIF
2863	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2864	IF ( inflow_disturbance_begin == -1 ) THEN
2865	inflow_disturbance_begin = MIN( 10, ny/2 )
2866	ENDIF
2867	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2868	THEN
2869	message_string = 'inflow_disturbance_begin out of range'
2870	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2871	ENDIF
2872	IF ( inflow_disturbance_end == -1 ) THEN
2873	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2874	ENDIF
2875	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2876	THEN
2877	message_string = 'inflow_disturbance_end out of range'
2878	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2879	ENDIF
2880	ENDIF
2881
2882	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2883	dist_nxr = nx - inflow_disturbance_begin
2884	dist_nxl(1) = nx - inflow_disturbance_end
2885	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2886	dist_nxl = inflow_disturbance_begin
2887	dist_nxr(1) = inflow_disturbance_end
2888	ENDIF
2889	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2890	dist_nyn = ny - inflow_disturbance_begin
2891	dist_nys(1) = ny - inflow_disturbance_end
2892	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2893	dist_nys = inflow_disturbance_begin
2894	dist_nyn(1) = inflow_disturbance_end
2895	ENDIF
2896
2897	!
2898	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2899	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2900	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2901	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2902	'condition at the inflow boundary'
2903	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2904	ENDIF
2905
2906	!
2907	!-- In case of turbulent inflow calculate the index of the recycling plane
2908	IF ( turbulent_inflow ) THEN
2909	IF ( recycling_width == 9999999.9 ) THEN
2910	!
2911	!-- Set the default value for the width of the recycling domain
2912	recycling_width = 0.1 * nx * dx
2913	ELSE
2914	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2915	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2916	' ', recycling_width
2917	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2918	ENDIF
2919	ENDIF
2920	!
2921	!-- Calculate the index
2922	recycling_plane = recycling_width / dx
2923	ENDIF
2924
2925	!
2926	!-- Check random generator
2927	IF ( random_generator /= 'system-specific' .AND. &
2928	random_generator /= 'numerical-recipes' ) THEN
2929	message_string = 'unknown random generator: random_generator = "' // &
2930	TRIM( random_generator ) // '"'
2931	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2932	ENDIF
2933
2934	!
2935	!-- Determine damping level index for 1D model
2936	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2937	IF ( damp_level_1d == -1.0 ) THEN
2938	damp_level_1d = zu(nzt+1)
2939	damp_level_ind_1d = nzt + 1
2940	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2941	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2942	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2943	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2944	ELSE
2945	DO k = 1, nzt+1
2946	IF ( damp_level_1d <= zu(k) ) THEN
2947	damp_level_ind_1d = k
2948	EXIT
2949	ENDIF
2950	ENDDO
2951	ENDIF
2952	ENDIF
2953
2954	!
2955	!-- Check some other 1d-model parameters
2956	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2957	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2958	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2959	'" is unknown'
2960	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2961	ENDIF
2962	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2963	TRIM( dissipation_1d ) /= 'detering' ) THEN
2964	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2965	'" is unknown'
2966	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2967	ENDIF
2968
2969	!
2970	!-- Set time for the next user defined restart (time_restart is the
2971	!-- internal parameter for steering restart events)
2972	IF ( restart_time /= 9999999.9 ) THEN
2973	IF ( restart_time > time_since_reference_point ) THEN
2974	time_restart = restart_time
2975	ENDIF
2976	ELSE
2977	!
2978	!-- In case of a restart run, set internal parameter to default (no restart)
2979	!-- if the NAMELIST-parameter restart_time is omitted
2980	time_restart = 9999999.9
2981	ENDIF
2982
2983	!
2984	!-- Set default value of the time needed to terminate a model run
2985	IF ( termination_time_needed == -1.0 ) THEN
2986	IF ( host(1:3) == 'ibm' ) THEN
2987	termination_time_needed = 300.0
2988	ELSE
2989	termination_time_needed = 35.0
2990	ENDIF
2991	ENDIF
2992
2993	!
2994	!-- Check the time needed to terminate a model run
2995	IF ( host(1:3) == 't3e' ) THEN
2996	!
2997	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2998	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2999	IF ( termination_time_needed <= 30.0 ) THEN
3000	WRITE( message_string, * ) 'termination_time_needed = ', &
3001	termination_time_needed, ' must be > 30.0 on host "', &
3002	TRIM( host ), '"'
3003	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3004	ENDIF
3005	ELSEIF ( host(1:3) == 'ibm' ) THEN
3006	!
3007	!-- On IBM-regatta machines the time should be at least 300 seconds,
3008	!-- because the job time consumed before executing palm (for compiling,
3009	!-- copying of files, etc.) has to be regarded
3010	IF ( termination_time_needed < 300.0 ) THEN
3011	WRITE( message_string, * ) 'termination_time_needed = ', &
3012	termination_time_needed, ' should be >= 300.0 on host "', &
3013	TRIM( host ), '"'
3014	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3015	ENDIF
3016	ENDIF
3017
3018	!
3019	!-- Check pressure gradient conditions
3020	IF ( dp_external .AND. conserve_volume_flow ) THEN
3021	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3022	'w are .TRUE. but one of them must be .FALSE.'
3023	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3024	ENDIF
3025	IF ( dp_external ) THEN
3026	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3027	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3028	' of range'
3029	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3030	ENDIF
3031	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3032	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3033	'ro, i.e. the external pressure gradient & will not be applied'
3034	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3035	ENDIF
3036	ENDIF
3037	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3038	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3039	'.FALSE., i.e. the external pressure gradient & will not be applied'
3040	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3041	ENDIF
3042	IF ( conserve_volume_flow ) THEN
3043	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3044	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
3045	conserve_volume_flow_mode = 'inflow_profile'
3046	ELSE
3047	conserve_volume_flow_mode = 'initial_profiles'
3048	ENDIF
3049	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3050	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3051	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3052	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3053	conserve_volume_flow_mode
3054	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3055	ENDIF
3056	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
3057	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
3058	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
3059	'require & conserve_volume_flow_mode = ''inflow_profile'''
3060	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3061	ENDIF
3062	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3063	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3064	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3065	'require & conserve_volume_flow_mode = ''initial_profiles''', &
3066	' or ''bulk_velocity'''
3067	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3068	ENDIF
3069	ENDIF
3070	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3071	( .NOT. conserve_volume_flow .OR. &
3072	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3073	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3074	'conserve_volume_flow = .T. and & ', &
3075	'conserve_volume_flow_mode = ''bulk_velocity'''
3076	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3077	ENDIF
3078
3079	!
3080	!-- Check particle attributes
3081	IF ( particle_color /= 'none' ) THEN
3082	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3083	particle_color /= 'z' ) THEN
3084	message_string = 'illegal value for parameter particle_color: ' // &
3085	TRIM( particle_color)
3086	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3087	ELSE
3088	IF ( color_interval(2) <= color_interval(1) ) THEN
3089	message_string = 'color_interval(2) <= color_interval(1)'
3090	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3091	ENDIF
3092	ENDIF
3093	ENDIF
3094
3095	IF ( particle_dvrpsize /= 'none' ) THEN
3096	IF ( particle_dvrpsize /= 'absw' ) THEN
3097	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3098	' ' // TRIM( particle_color)
3099	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3100	ELSE
3101	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3102	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3103	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3104	ENDIF
3105	ENDIF
3106	ENDIF
3107
3108	!
3109	!-- Check &userpar parameters
3110	CALL user_check_parameters
3111
3112
3113	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |