Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 251

Last change on this file since 251 was 241, checked in by letzel, 16 years ago
Option to predefine a target bulk velocity for conserve_volume_flow
Property svn:keywords set to `Id`
File size: 112.2 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Bugfix: pressure included for profile output
7	! Check pressure gradient conditions
8	!
9	! Former revisions:
10	! -----------------
11	! $Id: check_parameters.f90 241 2009-02-19 16:08:56Z raasch $
12	!
13	! 222 2009-01-12 16:04:16Z letzel
14	! +user_check_parameters
15	! Output of messages replaced by message handling routine.
16	! Implementation of an MPI-1 coupling: replaced myid with target_id,
17	! deleted __mpi2 directives
18	! Check that PALM is called with mrun -K parallel for coupling
19	!
20	! 197 2008-09-16 15:29:03Z raasch
21	! Bug fix: Construction of vertical profiles when 10 gradients have been
22	! specified in the parameter list (ug, vg, pt, q, sa, lad)
23	!
24	! Strict grid matching along z is not needed for mg-solver.
25	! Leaf area density (LAD) explicitly set to its surface value at k=0
26	! Case of reading data for recycling included in initializing_actions,
27	! check of turbulent_inflow and calculation of recycling_plane.
28	! q*2 profile added
29	!
30	! 138 2007-11-28 10:03:58Z letzel
31	! Plant canopy added
32	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
33	! Multigrid solver allows topography, checking of dt_sort_particles
34	! Bugfix: initializing u_init and v_init in case of ocean runs
35	!
36	! 109 2007-08-28 15:26:47Z letzel
37	! Check coupling_mode and set default (obligatory) values (like boundary
38	! conditions for temperature and fluxes) in case of coupled runs.
39	! +profiles for wp and w"e
40	! Bugfix: Error message concerning output of particle concentration (pc)
41	! modified
42	! More checks and more default values for coupled runs
43	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
44	! cloud_physics = .T.)
45	! Rayleigh damping for ocean fixed.
46	! Check and, if necessary, set default value for dt_coupling
47	!
48	! 97 2007-06-21 08:23:15Z raasch
49	! Initial salinity profile is calculated, salinity boundary conditions are
50	! checked,
51	! z_max_do1d is checked only in case of ocean = .f.,
52	! +initial temperature and geostrophic velocity profiles for the ocean version,
53	! use_pt_reference renamed use_reference
54	!
55	! 89 2007-05-25 12:08:31Z raasch
56	! Check for user-defined profiles
57	!
58	! 75 2007-03-22 09:54:05Z raasch
59	! "by_user" allowed as initializing action, -data_output_ts,
60	! leapfrog with non-flat topography not allowed any more, loop_optimization
61	! and pt_reference are checked, moisture renamed humidity,
62	! output of precipitation amount/rate and roughnes length + check
63	! possible negative humidities are avoided in initial profile,
64	! dirichlet/neumann changed to dirichlet/radiation, etc.,
65	! revision added to run_description_header
66	!
67	! 20 2007-02-26 00:12:32Z raasch
68	! Temperature and humidity gradients at top are now calculated for nzt+1,
69	! top_heatflux and respective boundary condition bc_pt_t is checked
70	!
71	! RCS Log replace by Id keyword, revision history cleaned up
72	!
73	! Revision 1.61 2006/08/04 14:20:25 raasch
74	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
75	! use_upstream_for_tke, default value for dt_dopts,
76	! generation of file header moved from routines palm and header to here
77	!
78	! Revision 1.1 1997/08/26 06:29:23 raasch
79	! Initial revision
80	!
81	!
82	! Description:
83	! ------------
84	! Check control parameters and deduce further quantities.
85	!------------------------------------------------------------------------------!
86
87	USE arrays_3d
88	USE constants
89	USE control_parameters
90	USE grid_variables
91	USE indices
92	USE model_1d
93	USE netcdf_control
94	USE particle_attributes
95	USE pegrid
96	USE profil_parameter
97	USE statistics
98	USE transpose_indices
99
100	IMPLICIT NONE
101
102	CHARACTER (LEN=1) :: sq
103	CHARACTER (LEN=6) :: var
104	CHARACTER (LEN=7) :: unit
105	CHARACTER (LEN=8) :: date
106	CHARACTER (LEN=10) :: time
107	CHARACTER (LEN=40) :: coupling_string
108	CHARACTER (LEN=100) :: action
109
110	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
111	position, prec
112	LOGICAL :: found, ldum
113	REAL :: gradient, maxn, maxp, remote = 0.0
114
115	!
116	!-- Warning, if host is not set
117	IF ( host(1:1) == ' ' ) THEN
118	message_string = '"host" is not set. Please check that environment ' // &
119	'variable "localhost" & is set before running PALM'
120	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
121	ENDIF
122
123	!
124	!-- Check the coupling mode
125	IF ( coupling_mode /= 'uncoupled' .AND. &
126	coupling_mode /= 'atmosphere_to_ocean' .AND. &
127	coupling_mode /= 'ocean_to_atmosphere' ) THEN
128	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
129	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
130	ENDIF
131
132	!
133	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
134	IF ( coupling_mode /= 'uncoupled' ) THEN
135
136	IF ( dt_coupling == 9999999.9 ) THEN
137	message_string = 'dt_coupling is not set but required for coup' // &
138	'ling mode "' // TRIM( coupling_mode ) // '"'
139	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
140	ENDIF
141
142	#if defined( __parallel )
143	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
144	ierr )
145	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
146	status, ierr )
147	IF ( dt_coupling /= remote ) THEN
148	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
149	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
150	'dt_coupling_remote = ', remote
151	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
152	ENDIF
153	IF ( dt_coupling <= 0.0 ) THEN
154	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
155	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
156	status, ierr )
157	dt_coupling = MAX( dt_max, remote )
158	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
159	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
160	'MAX(dt_max(A,O)) = ', dt_coupling
161	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
162	ENDIF
163
164	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
165	ierr )
166	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
167	status, ierr )
168	IF ( restart_time /= remote ) THEN
169	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
170	'": restart_time = ', restart_time, '& is not equal to ', &
171	'restart_time_remote = ', remote
172	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
173	ENDIF
174
175	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
176	ierr )
177	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
178	status, ierr )
179	IF ( dt_restart /= remote ) THEN
180	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
181	'": dt_restart = ', dt_restart, '& is not equal to ', &
182	'dt_restart_remote = ', remote
183	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
184	ENDIF
185
186	CALL MPI_SEND( end_time, 1, MPI_REAL, target_id, 14, comm_inter, ierr )
187	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
188	status, ierr )
189	IF ( end_time /= remote ) THEN
190	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
191	'": end_time = ', end_time, '& is not equal to ', &
192	'end_time_remote = ', remote
193	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
194	ENDIF
195
196	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
197	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
198	status, ierr )
199	IF ( dx /= remote ) THEN
200	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
201	'": dx = ', dx, '& is not equal to dx_remote = ', remote
202	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
203	ENDIF
204
205	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
206	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
207	status, ierr )
208	IF ( dy /= remote ) THEN
209	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
210	'": dy = ', dy, '& is not equal to dy_remote = ', remote
211	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
212	ENDIF
213
214	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
215	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
216	status, ierr )
217	IF ( nx /= iremote ) THEN
218	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
219	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
220	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
221	ENDIF
222
223	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
224	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
225	status, ierr )
226	IF ( ny /= iremote ) THEN
227	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
228	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
229	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
230	ENDIF
231	#else
232	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
233	' ''mrun -K parallel'''
234	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
235	#endif
236	ENDIF
237
238	#if defined( __parallel )
239	!
240	!-- Exchange via intercommunicator
241	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
242	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
243	ierr )
244	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
245	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
246	comm_inter, status, ierr )
247	ENDIF
248	#endif
249
250
251	!
252	!-- Generate the file header which is used as a header for most of PALM's
253	!-- output files
254	CALL DATE_AND_TIME( date, time )
255	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
256	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
257	IF ( coupling_mode == 'uncoupled' ) THEN
258	coupling_string = ''
259	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
260	coupling_string = ' coupled (atmosphere)'
261	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
262	coupling_string = ' coupled (ocean)'
263	ENDIF
264
265	WRITE ( run_description_header, &
266	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
267	TRIM( version ), TRIM( revision ), 'run: ', &
268	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
269	'host: ', TRIM( host ), run_date, run_time
270
271	!
272	!-- Check the general loop optimization method
273	IF ( loop_optimization == 'default' ) THEN
274	IF ( host(1:3) == 'nec' ) THEN
275	loop_optimization = 'vector'
276	ELSE
277	loop_optimization = 'cache'
278	ENDIF
279	ENDIF
280	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
281	.AND. loop_optimization /= 'vector' ) THEN
282	message_string = 'illegal value given for loop_optimization: "' // &
283	TRIM( loop_optimization ) // '"'
284	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
285	ENDIF
286
287	!
288	!-- Check topography setting (check for illegal parameter combinations)
289	IF ( topography /= 'flat' ) THEN
290	action = ' '
291	IF ( scalar_advec /= 'pw-scheme' ) THEN
292	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
293	ENDIF
294	IF ( momentum_advec /= 'pw-scheme' ) THEN
295	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
296	ENDIF
297	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
298	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
299	ENDIF
300	IF ( psolver == 'sor' ) THEN
301	WRITE( action, '(A,A)' ) 'psolver = ', psolver
302	ENDIF
303	IF ( sloping_surface ) THEN
304	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
305	ENDIF
306	IF ( galilei_transformation ) THEN
307	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
308	ENDIF
309	IF ( cloud_physics ) THEN
310	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
311	ENDIF
312	IF ( cloud_droplets ) THEN
313	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
314	ENDIF
315	IF ( humidity ) THEN
316	WRITE( action, '(A)' ) 'humidity = .TRUE.'
317	ENDIF
318	IF ( .NOT. prandtl_layer ) THEN
319	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
320	ENDIF
321	IF ( action /= ' ' ) THEN
322	message_string = 'a non-flat topography does not allow ' // &
323	TRIM( action )
324	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
325	ENDIF
326	ENDIF
327
328	!
329	!-- Check ocean setting
330	IF ( ocean ) THEN
331	action = ' '
332	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
333	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
334	ENDIF
335	IF ( momentum_advec == 'ups-scheme' ) THEN
336	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
337	ENDIF
338	IF ( action /= ' ' ) THEN
339	message_string = 'ocean = .T. does not allow ' // TRIM( action )
340	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
341	ENDIF
342	ENDIF
343
344	!
345	!-- Check whether there are any illegal values
346	!-- Pressure solver:
347	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
348	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
349	message_string = 'unknown solver for perturbation pressure: psolver' // &
350	' = "' // TRIM( psolver ) // '"'
351	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
352	ENDIF
353
354	#if defined( __parallel )
355	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
356	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
357	'for a 1d domain-decomposition along x & please do' // &
358	' not set npey/=1 in the parameter file'
359	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
360	ENDIF
361	IF ( psolver == 'poisfft_hybrid' .AND. &
362	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
363	psolver == 'multigrid' .AND. &
364	( nxra > nxr .OR. nyna > nyn ) ) THEN
365	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
366	'work for subdomains with unequal size & please ' // &
367	'set grid_matching = ''strict'' in the parameter file'
368	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
369	ENDIF
370	#else
371	IF ( psolver == 'poisfft_hybrid' ) THEN
372	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
373	' for a parallel environment'
374	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
375	ENDIF
376	#endif
377
378	IF ( psolver == 'multigrid' ) THEN
379	IF ( cycle_mg == 'w' ) THEN
380	gamma_mg = 2
381	ELSEIF ( cycle_mg == 'v' ) THEN
382	gamma_mg = 1
383	ELSE
384	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
385	TRIM( cycle_mg ) // '"'
386	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
387	ENDIF
388	ENDIF
389
390	IF ( fft_method /= 'singleton-algorithm' .AND. &
391	fft_method /= 'temperton-algorithm' .AND. &
392	fft_method /= 'system-specific' ) THEN
393	message_string = 'unknown fft-algorithm: fft_method = "' // &
394	TRIM( fft_method ) // '"'
395	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
396	ENDIF
397
398	!
399	!-- Advection schemes:
400	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
401	THEN
402	message_string = 'unknown advection scheme: momentum_advec = "' // &
403	TRIM( momentum_advec ) // '"'
404	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
405	ENDIF
406	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
407	.AND. timestep_scheme /= 'euler' ) THEN
408	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
409	'" is not allowed with timestep_scheme = "' // &
410	TRIM( timestep_scheme ) // '"'
411	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
412	ENDIF
413
414	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
415	scalar_advec /= 'ups-scheme' ) THEN
416	message_string = 'unknown advection scheme: scalar_advec = "' // &
417	TRIM( scalar_advec ) // '"'
418	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
419	ENDIF
420
421	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
422	use_upstream_for_tke = .TRUE.
423	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
424	'use_sgs_for_particles = .TRUE.'
425	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
426	ENDIF
427
428	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
429	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
430	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
431	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
432	ENDIF
433
434	!
435	!-- Timestep schemes:
436	SELECT CASE ( TRIM( timestep_scheme ) )
437
438	CASE ( 'euler' )
439	intermediate_timestep_count_max = 1
440	asselin_filter_factor = 0.0
441
442	CASE ( 'leapfrog', 'leapfrog+euler' )
443	intermediate_timestep_count_max = 1
444
445	CASE ( 'runge-kutta-2' )
446	intermediate_timestep_count_max = 2
447	asselin_filter_factor = 0.0
448
449	CASE ( 'runge-kutta-3' )
450	intermediate_timestep_count_max = 3
451	asselin_filter_factor = 0.0
452
453	CASE DEFAULT
454	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
455	TRIM( timestep_scheme ) // '"'
456	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
457
458	END SELECT
459
460	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
461	THEN
462	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
463	'" & does not work with timestep_scheme "' // &
464	TRIM( timestep_scheme ) // '"'
465	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
466	ENDIF
467
468	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
469	THEN
470	message_string = 'momentum advection scheme "' // &
471	TRIM( momentum_advec ) // '" & does not work with ' // &
472	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
473	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
474	ENDIF
475
476	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
477	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
478	!
479	!-- No restart run: several initialising actions are possible
480	action = initializing_actions
481	DO WHILE ( TRIM( action ) /= '' )
482	position = INDEX( action, ' ' )
483	SELECT CASE ( action(1:position-1) )
484
485	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
486	'by_user', 'initialize_vortex', 'initialize_ptanom' )
487	action = action(position+1:)
488
489	CASE DEFAULT
490	message_string = 'initializing_action = "' // &
491	TRIM( action ) // '" unkown or not allowed'
492	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
493
494	END SELECT
495	ENDDO
496	ENDIF
497
498	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
499	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
500	message_string = 'initializing_actions = "set_constant_profiles"' // &
501	' and "set_1d-model_profiles" are not allowed ' // &
502	'simultaneously'
503	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
504	ENDIF
505
506	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
507	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
508	message_string = 'initializing_actions = "set_constant_profiles"' // &
509	' and "by_user" are not allowed simultaneously'
510	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
511	ENDIF
512
513	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
514	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
515	message_string = 'initializing_actions = "by_user" and ' // &
516	'"set_1d-model_profiles" are not allowed simultaneously'
517	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
518	ENDIF
519
520	IF ( cloud_physics .AND. .NOT. humidity ) THEN
521	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
522	'not allowed with humidity = ', humidity
523	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
524	ENDIF
525
526	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
527	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
528	'not allowed with cloud_physics = ', cloud_physics
529	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
530	ENDIF
531
532	IF ( humidity .AND. sloping_surface ) THEN
533	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
534	'are not allowed simultaneously'
535	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
536	ENDIF
537
538	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
539	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
540	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
541	ENDIF
542
543	IF ( passive_scalar .AND. humidity ) THEN
544	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
545	'is not allowed simultaneously'
546	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
547	ENDIF
548
549	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
550	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
551	' = .TRUE.'
552	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
553	ENDIF
554
555	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
556	message_string = 'illegal value "' // TRIM( grid_matching ) // &
557	'" found for parameter grid_matching'
558	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
559	ENDIF
560
561	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
562	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
563	'coefficient & given value is drag_coefficient = 0.0'
564	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
565	ENDIF
566
567	!
568	!-- In case of no model continuation run, check initialising parameters and
569	!-- deduce further quantities
570	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
571
572	!
573	!-- Initial profiles for 1D and 3D model, respectively
574	u_init = ug_surface
575	v_init = vg_surface
576	pt_init = pt_surface
577	IF ( humidity ) q_init = q_surface
578	IF ( ocean ) sa_init = sa_surface
579	IF ( passive_scalar ) q_init = s_surface
580	IF ( plant_canopy ) lad = 0.0
581
582	!
583	!--
584	!-- If required, compute initial profile of the geostrophic wind
585	!-- (component ug)
586	i = 1
587	gradient = 0.0
588
589	IF ( .NOT. ocean ) THEN
590
591	ug_vertical_gradient_level_ind(1) = 0
592	ug(0) = ug_surface
593	DO k = 1, nzt+1
594	IF ( i < 11 ) THEN
595	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
596	ug_vertical_gradient_level(i) >= 0.0 ) THEN
597	gradient = ug_vertical_gradient(i) / 100.0
598	ug_vertical_gradient_level_ind(i) = k - 1
599	i = i + 1
600	ENDIF
601	ENDIF
602	IF ( gradient /= 0.0 ) THEN
603	IF ( k /= 1 ) THEN
604	ug(k) = ug(k-1) + dzu(k) * gradient
605	ELSE
606	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
607	ENDIF
608	ELSE
609	ug(k) = ug(k-1)
610	ENDIF
611	ENDDO
612
613	ELSE
614
615	ug_vertical_gradient_level_ind(1) = nzt+1
616	ug(nzt+1) = ug_surface
617	DO k = nzt, 0, -1
618	IF ( i < 11 ) THEN
619	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
620	ug_vertical_gradient_level(i) <= 0.0 ) THEN
621	gradient = ug_vertical_gradient(i) / 100.0
622	ug_vertical_gradient_level_ind(i) = k + 1
623	i = i + 1
624	ENDIF
625	ENDIF
626	IF ( gradient /= 0.0 ) THEN
627	IF ( k /= nzt ) THEN
628	ug(k) = ug(k+1) - dzu(k+1) * gradient
629	ELSE
630	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
631	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
632	ENDIF
633	ELSE
634	ug(k) = ug(k+1)
635	ENDIF
636	ENDDO
637
638	ENDIF
639
640	u_init = ug
641
642	!
643	!-- In case of no given gradients for ug, choose a vanishing gradient
644	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
645	ug_vertical_gradient_level(1) = 0.0
646	ENDIF
647
648	!
649	!--
650	!-- If required, compute initial profile of the geostrophic wind
651	!-- (component vg)
652	i = 1
653	gradient = 0.0
654
655	IF ( .NOT. ocean ) THEN
656
657	vg_vertical_gradient_level_ind(1) = 0
658	vg(0) = vg_surface
659	DO k = 1, nzt+1
660	IF ( i < 11 ) THEN
661	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
662	vg_vertical_gradient_level(i) >= 0.0 ) THEN
663	gradient = vg_vertical_gradient(i) / 100.0
664	vg_vertical_gradient_level_ind(i) = k - 1
665	i = i + 1
666	ENDIF
667	ENDIF
668	IF ( gradient /= 0.0 ) THEN
669	IF ( k /= 1 ) THEN
670	vg(k) = vg(k-1) + dzu(k) * gradient
671	ELSE
672	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
673	ENDIF
674	ELSE
675	vg(k) = vg(k-1)
676	ENDIF
677	ENDDO
678
679	ELSE
680
681	vg_vertical_gradient_level_ind(1) = nzt+1
682	vg(nzt+1) = vg_surface
683	DO k = nzt, 0, -1
684	IF ( i < 11 ) THEN
685	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
686	vg_vertical_gradient_level(i) <= 0.0 ) THEN
687	gradient = vg_vertical_gradient(i) / 100.0
688	vg_vertical_gradient_level_ind(i) = k + 1
689	i = i + 1
690	ENDIF
691	ENDIF
692	IF ( gradient /= 0.0 ) THEN
693	IF ( k /= nzt ) THEN
694	vg(k) = vg(k+1) - dzu(k+1) * gradient
695	ELSE
696	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
697	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
698	ENDIF
699	ELSE
700	vg(k) = vg(k+1)
701	ENDIF
702	ENDDO
703
704	ENDIF
705
706	v_init = vg
707
708	!
709	!-- In case of no given gradients for vg, choose a vanishing gradient
710	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
711	vg_vertical_gradient_level(1) = 0.0
712	ENDIF
713
714	!
715	!-- Compute initial temperature profile using the given temperature gradients
716	i = 1
717	gradient = 0.0
718
719	IF ( .NOT. ocean ) THEN
720
721	pt_vertical_gradient_level_ind(1) = 0
722	DO k = 1, nzt+1
723	IF ( i < 11 ) THEN
724	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
725	pt_vertical_gradient_level(i) >= 0.0 ) THEN
726	gradient = pt_vertical_gradient(i) / 100.0
727	pt_vertical_gradient_level_ind(i) = k - 1
728	i = i + 1
729	ENDIF
730	ENDIF
731	IF ( gradient /= 0.0 ) THEN
732	IF ( k /= 1 ) THEN
733	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
734	ELSE
735	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
736	ENDIF
737	ELSE
738	pt_init(k) = pt_init(k-1)
739	ENDIF
740	ENDDO
741
742	ELSE
743
744	pt_vertical_gradient_level_ind(1) = nzt+1
745	DO k = nzt, 0, -1
746	IF ( i < 11 ) THEN
747	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
748	pt_vertical_gradient_level(i) <= 0.0 ) THEN
749	gradient = pt_vertical_gradient(i) / 100.0
750	pt_vertical_gradient_level_ind(i) = k + 1
751	i = i + 1
752	ENDIF
753	ENDIF
754	IF ( gradient /= 0.0 ) THEN
755	IF ( k /= nzt ) THEN
756	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
757	ELSE
758	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
759	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
760	ENDIF
761	ELSE
762	pt_init(k) = pt_init(k+1)
763	ENDIF
764	ENDDO
765
766	ENDIF
767
768	!
769	!-- In case of no given temperature gradients, choose gradient of neutral
770	!-- stratification
771	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
772	pt_vertical_gradient_level(1) = 0.0
773	ENDIF
774
775	!
776	!-- Store temperature gradient at the top boundary for possible Neumann
777	!-- boundary condition
778	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
779
780	!
781	!-- If required, compute initial humidity or scalar profile using the given
782	!-- humidity/scalar gradient. In case of scalar transport, initially store
783	!-- values of the scalar parameters on humidity parameters
784	IF ( passive_scalar ) THEN
785	bc_q_b = bc_s_b
786	bc_q_t = bc_s_t
787	q_surface = s_surface
788	q_surface_initial_change = s_surface_initial_change
789	q_vertical_gradient = s_vertical_gradient
790	q_vertical_gradient_level = s_vertical_gradient_level
791	surface_waterflux = surface_scalarflux
792	ENDIF
793
794	IF ( humidity .OR. passive_scalar ) THEN
795
796	i = 1
797	gradient = 0.0
798	q_vertical_gradient_level_ind(1) = 0
799	DO k = 1, nzt+1
800	IF ( i < 11 ) THEN
801	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
802	q_vertical_gradient_level(i) >= 0.0 ) THEN
803	gradient = q_vertical_gradient(i) / 100.0
804	q_vertical_gradient_level_ind(i) = k - 1
805	i = i + 1
806	ENDIF
807	ENDIF
808	IF ( gradient /= 0.0 ) THEN
809	IF ( k /= 1 ) THEN
810	q_init(k) = q_init(k-1) + dzu(k) * gradient
811	ELSE
812	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
813	ENDIF
814	ELSE
815	q_init(k) = q_init(k-1)
816	ENDIF
817	!
818	!-- Avoid negative humidities
819	IF ( q_init(k) < 0.0 ) THEN
820	q_init(k) = 0.0
821	ENDIF
822	ENDDO
823
824	!
825	!-- In case of no given humidity gradients, choose zero gradient
826	!-- conditions
827	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
828	q_vertical_gradient_level(1) = 0.0
829	ENDIF
830
831	!
832	!-- Store humidity gradient at the top boundary for possile Neumann
833	!-- boundary condition
834	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
835
836	ENDIF
837
838	!
839	!-- If required, compute initial salinity profile using the given salinity
840	!-- gradients
841	IF ( ocean ) THEN
842
843	i = 1
844	gradient = 0.0
845
846	sa_vertical_gradient_level_ind(1) = nzt+1
847	DO k = nzt, 0, -1
848	IF ( i < 11 ) THEN
849	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
850	sa_vertical_gradient_level(i) <= 0.0 ) THEN
851	gradient = sa_vertical_gradient(i) / 100.0
852	sa_vertical_gradient_level_ind(i) = k + 1
853	i = i + 1
854	ENDIF
855	ENDIF
856	IF ( gradient /= 0.0 ) THEN
857	IF ( k /= nzt ) THEN
858	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
859	ELSE
860	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
861	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
862	ENDIF
863	ELSE
864	sa_init(k) = sa_init(k+1)
865	ENDIF
866	ENDDO
867
868	ENDIF
869
870	!
871	!-- If required compute the profile of leaf area density used in the plant canopy model
872	IF ( plant_canopy ) THEN
873
874	i = 1
875	gradient = 0.0
876
877	IF ( .NOT. ocean ) THEN
878
879	lad(0) = lad_surface
880
881	lad_vertical_gradient_level_ind(1) = 0
882	DO k = 1, pch_index
883	IF ( i < 11 ) THEN
884	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
885	lad_vertical_gradient_level(i) >= 0.0 ) THEN
886	gradient = lad_vertical_gradient(i)
887	lad_vertical_gradient_level_ind(i) = k - 1
888	i = i + 1
889	ENDIF
890	ENDIF
891	IF ( gradient /= 0.0 ) THEN
892	IF ( k /= 1 ) THEN
893	lad(k) = lad(k-1) + dzu(k) * gradient
894	ELSE
895	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
896	ENDIF
897	ELSE
898	lad(k) = lad(k-1)
899	ENDIF
900	ENDDO
901
902	ENDIF
903
904	!
905	!-- In case of no given leaf area density gradients, choose a vanishing gradient
906	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
907	lad_vertical_gradient_level(1) = 0.0
908	ENDIF
909
910	ENDIF
911
912	ENDIF
913
914	!
915	!-- Compute Coriolis parameter
916	f = 2.0 * omega * SIN( phi / 180.0 * pi )
917	fs = 2.0 * omega * COS( phi / 180.0 * pi )
918
919	!
920	!-- Ocean runs always use reference values in the buoyancy term. Therefore
921	!-- set the reference temperature equal to the surface temperature.
922	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
923
924	!
925	!-- Reference value has to be used in buoyancy terms
926	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
927
928	!
929	!-- Sign of buoyancy/stability terms
930	IF ( ocean ) atmos_ocean_sign = -1.0
931
932	!
933	!-- Ocean version must use flux boundary conditions at the top
934	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
935	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
936	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
937	ENDIF
938
939	!
940	!-- In case of a given slope, compute the relevant quantities
941	IF ( alpha_surface /= 0.0 ) THEN
942	IF ( ABS( alpha_surface ) > 90.0 ) THEN
943	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
944	' ) must be < 90.0'
945	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
946	ENDIF
947	sloping_surface = .TRUE.
948	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
949	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
950	ENDIF
951
952	!
953	!-- Check time step and cfl_factor
954	IF ( dt /= -1.0 ) THEN
955	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
956	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
957	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
958	ENDIF
959	dt_3d = dt
960	dt_fixed = .TRUE.
961	ENDIF
962
963	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
964	IF ( cfl_factor == -1.0 ) THEN
965	IF ( momentum_advec == 'ups-scheme' .OR. &
966	scalar_advec == 'ups-scheme' ) THEN
967	cfl_factor = 0.8
968	ELSE
969	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
970	cfl_factor = 0.8
971	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
972	cfl_factor = 0.9
973	ELSE
974	cfl_factor = 0.1
975	ENDIF
976	ENDIF
977	ELSE
978	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
979	' out of range & 0.0 < cfl_factor <= 1.0 is required'
980	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
981	ENDIF
982	ENDIF
983
984	!
985	!-- Store simulated time at begin
986	simulated_time_at_begin = simulated_time
987
988	!
989	!-- Set wind speed in the Galilei-transformed system
990	IF ( galilei_transformation ) THEN
991	IF ( use_ug_for_galilei_tr .AND. &
992	ug_vertical_gradient_level(1) == 0.0 .AND. &
993	vg_vertical_gradient_level(1) == 0.0 ) THEN
994	u_gtrans = ug_surface
995	v_gtrans = vg_surface
996	ELSEIF ( use_ug_for_galilei_tr .AND. &
997	ug_vertical_gradient_level(1) /= 0.0 ) THEN
998	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
999	' with galilei transformation'
1000	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1001	ELSEIF ( use_ug_for_galilei_tr .AND. &
1002	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1003	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1004	' with galilei transformation'
1005	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1006	ELSE
1007	message_string = 'variable translation speed used for galilei-' // &
1008	'transformation, which may cause & instabilities in stably ' // &
1009	'stratified regions'
1010	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1011	ENDIF
1012	ENDIF
1013
1014	!
1015	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1016	!-- fluxes have to be used in the diffusion-terms
1017	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1018
1019	!
1020	!-- Check boundary conditions and set internal variables:
1021	!-- Lateral boundary conditions
1022	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1023	bc_lr /= 'radiation/dirichlet' ) THEN
1024	message_string = 'unknown boundary condition: bc_lr = "' // &
1025	TRIM( bc_lr ) // '"'
1026	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1027	ENDIF
1028	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1029	bc_ns /= 'radiation/dirichlet' ) THEN
1030	message_string = 'unknown boundary condition: bc_ns = "' // &
1031	TRIM( bc_ns ) // '"'
1032	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1033	ENDIF
1034
1035	!
1036	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1037	!-- Willimas advection scheme. Several schemes and tools do not work with
1038	!-- non-cyclic boundary conditions.
1039	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1040	IF ( psolver /= 'multigrid' ) THEN
1041	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1042	'psolver = "' // TRIM( psolver ) // '"'
1043	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1044	ENDIF
1045	IF ( momentum_advec /= 'pw-scheme' ) THEN
1046	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1047	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1048	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1049	ENDIF
1050	IF ( scalar_advec /= 'pw-scheme' ) THEN
1051	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1052	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1053	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1054	ENDIF
1055	IF ( galilei_transformation ) THEN
1056	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1057	'galilei_transformation = .T.'
1058	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1059	ENDIF
1060	ENDIF
1061
1062	!
1063	!-- Bottom boundary condition for the turbulent Kinetic energy
1064	IF ( bc_e_b == 'neumann' ) THEN
1065	ibc_e_b = 1
1066	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1067	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1068	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1069	ENDIF
1070	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1071	ibc_e_b = 2
1072	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1073	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1074	TRIM( bc_e_b ) // '"'
1075	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1076	ENDIF
1077	IF ( .NOT. prandtl_layer ) THEN
1078	bc_e_b = 'neumann'
1079	ibc_e_b = 1
1080	message_string = 'boundary condition bc_e_b changed to "' // &
1081	TRIM( bc_e_b ) // '"'
1082	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1083	ENDIF
1084	ELSE
1085	message_string = 'unknown boundary condition: bc_e_b = "' // &
1086	TRIM( bc_e_b ) // '"'
1087	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1088	ENDIF
1089
1090	!
1091	!-- Boundary conditions for perturbation pressure
1092	IF ( bc_p_b == 'dirichlet' ) THEN
1093	ibc_p_b = 0
1094	ELSEIF ( bc_p_b == 'neumann' ) THEN
1095	ibc_p_b = 1
1096	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1097	ibc_p_b = 2
1098	ELSE
1099	message_string = 'unknown boundary condition: bc_p_b = "' // &
1100	TRIM( bc_p_b ) // '"'
1101	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1102	ENDIF
1103	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1104	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1105	'" not allowed with prandtl_layer = .FALSE.'
1106	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1107	ENDIF
1108	IF ( bc_p_t == 'dirichlet' ) THEN
1109	ibc_p_t = 0
1110	ELSEIF ( bc_p_t == 'neumann' ) THEN
1111	ibc_p_t = 1
1112	ELSE
1113	message_string = 'unknown boundary condition: bc_p_t = "' // &
1114	TRIM( bc_p_t ) // '"'
1115	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1116	ENDIF
1117
1118	!
1119	!-- Boundary conditions for potential temperature
1120	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1121	ibc_pt_b = 2
1122	ELSE
1123	IF ( bc_pt_b == 'dirichlet' ) THEN
1124	ibc_pt_b = 0
1125	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1126	ibc_pt_b = 1
1127	ELSE
1128	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1129	TRIM( bc_pt_b ) // '"'
1130	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1131	ENDIF
1132	ENDIF
1133
1134	IF ( bc_pt_t == 'dirichlet' ) THEN
1135	ibc_pt_t = 0
1136	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1137	ibc_pt_t = 1
1138	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1139	ibc_pt_t = 2
1140	ELSE
1141	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1142	TRIM( bc_pt_t ) // '"'
1143	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1144	ENDIF
1145
1146	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1147	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1148	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1149	top_momentumflux_v /= 9999999.9 ) THEN
1150	constant_top_momentumflux = .TRUE.
1151	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1152	top_momentumflux_v == 9999999.9 ) ) THEN
1153	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1154	'must be set'
1155	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1156	ENDIF
1157
1158	!
1159	!-- A given surface temperature implies Dirichlet boundary condition for
1160	!-- temperature. In this case specification of a constant heat flux is
1161	!-- forbidden.
1162	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1163	surface_heatflux /= 0.0 ) THEN
1164	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1165	'& is not allowed with constant_heatflux = .TRUE.'
1166	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1167	ENDIF
1168	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1169	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1170	'wed with pt_surface_initial_change (/=0) = ', &
1171	pt_surface_initial_change
1172	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1173	ENDIF
1174
1175	!
1176	!-- A given temperature at the top implies Dirichlet boundary condition for
1177	!-- temperature. In this case specification of a constant heat flux is
1178	!-- forbidden.
1179	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1180	top_heatflux /= 0.0 ) THEN
1181	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1182	'" is not allowed with constant_top_heatflux = .TRUE.'
1183	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1184	ENDIF
1185
1186	!
1187	!-- Boundary conditions for salinity
1188	IF ( ocean ) THEN
1189	IF ( bc_sa_t == 'dirichlet' ) THEN
1190	ibc_sa_t = 0
1191	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1192	ibc_sa_t = 1
1193	ELSE
1194	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1195	TRIM( bc_sa_t ) // '"'
1196	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1197	ENDIF
1198
1199	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1200	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1201	message_string = 'boundary condition: bc_sa_t = "' // &
1202	TRIM( bc_sa_t ) // '" requires to set ' // &
1203	'top_salinityflux'
1204	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1205	ENDIF
1206
1207	!
1208	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1209	!-- salinity. In this case specification of a constant salinity flux is
1210	!-- forbidden.
1211	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1212	top_salinityflux /= 0.0 ) THEN
1213	message_string = 'boundary condition: bc_sa_t = "' // &
1214	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1215	'constant_top_salinityflux = .TRUE.'
1216	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1217	ENDIF
1218
1219	ENDIF
1220
1221	!
1222	!-- In case of humidity or passive scalar, set boundary conditions for total
1223	!-- water content / scalar
1224	IF ( humidity .OR. passive_scalar ) THEN
1225	IF ( humidity ) THEN
1226	sq = 'q'
1227	ELSE
1228	sq = 's'
1229	ENDIF
1230	IF ( bc_q_b == 'dirichlet' ) THEN
1231	ibc_q_b = 0
1232	ELSEIF ( bc_q_b == 'neumann' ) THEN
1233	ibc_q_b = 1
1234	ELSE
1235	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1236	'_b ="' // TRIM( bc_q_b ) // '"'
1237	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1238	ENDIF
1239	IF ( bc_q_t == 'dirichlet' ) THEN
1240	ibc_q_t = 0
1241	ELSEIF ( bc_q_t == 'neumann' ) THEN
1242	ibc_q_t = 1
1243	ELSE
1244	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1245	'_t ="' // TRIM( bc_q_t ) // '"'
1246	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1247	ENDIF
1248
1249	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1250
1251	!
1252	!-- A given surface humidity implies Dirichlet boundary condition for
1253	!-- humidity. In this case specification of a constant water flux is
1254	!-- forbidden.
1255	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1256	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1257	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1258	'th prescribed surface flux'
1259	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1260	ENDIF
1261	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1262	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1263	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1264	q_surface_initial_change
1265	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1266	ENDIF
1267
1268	ENDIF
1269
1270	!
1271	!-- Boundary conditions for horizontal components of wind speed
1272	IF ( bc_uv_b == 'dirichlet' ) THEN
1273	ibc_uv_b = 0
1274	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1275	ibc_uv_b = 1
1276	IF ( prandtl_layer ) THEN
1277	message_string = 'boundary condition: bc_uv_b = "' // &
1278	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1279	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1280	ENDIF
1281	ELSE
1282	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1283	TRIM( bc_uv_b ) // '"'
1284	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1285	ENDIF
1286
1287	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1288	bc_uv_t = 'neumann'
1289	ibc_uv_t = 1
1290	ELSE
1291	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1292	ibc_uv_t = 0
1293	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1294	ibc_uv_t = 1
1295	ELSE
1296	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1297	TRIM( bc_uv_t ) // '"'
1298	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1299	ENDIF
1300	ENDIF
1301
1302	!
1303	!-- Compute and check, respectively, the Rayleigh Damping parameter
1304	IF ( rayleigh_damping_factor == -1.0 ) THEN
1305	IF ( momentum_advec == 'ups-scheme' ) THEN
1306	rayleigh_damping_factor = 0.01
1307	ELSE
1308	rayleigh_damping_factor = 0.0
1309	ENDIF
1310	ELSE
1311	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1312	THEN
1313	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1314	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1315	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1316	ENDIF
1317	ENDIF
1318
1319	IF ( rayleigh_damping_height == -1.0 ) THEN
1320	IF ( .NOT. ocean ) THEN
1321	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1322	ELSE
1323	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1324	ENDIF
1325	ELSE
1326	IF ( .NOT. ocean ) THEN
1327	IF ( rayleigh_damping_height < 0.0 .OR. &
1328	rayleigh_damping_height > zu(nzt) ) THEN
1329	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1330	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1331	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1332	ENDIF
1333	ELSE
1334	IF ( rayleigh_damping_height > 0.0 .OR. &
1335	rayleigh_damping_height < zu(nzb) ) THEN
1336	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1337	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1338	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1339	ENDIF
1340	ENDIF
1341	ENDIF
1342
1343	!
1344	!-- Check limiters for Upstream-Spline scheme
1345	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1346	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1347	overshoot_limit_e < 0.0 ) THEN
1348	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1349	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1350	ENDIF
1351	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1352	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1353	message_string = 'ups_limit_... < 0.0 is not allowed'
1354	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1355	ENDIF
1356
1357	!
1358	!-- Check number of chosen statistic regions. More than 10 regions are not
1359	!-- allowed, because so far no more than 10 corresponding output files can
1360	!-- be opened (cf. check_open)
1361	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1362	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1363	statistic_regions+1, ' but only 10 regions are allowed'
1364	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1365	ENDIF
1366	IF ( normalizing_region > statistic_regions .OR. &
1367	normalizing_region < 0) THEN
1368	WRITE ( message_string, * ) 'normalizing_region = ', &
1369	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1370	' (value of statistic_regions)'
1371	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1372	ENDIF
1373
1374	!
1375	!-- Check the interval for sorting particles.
1376	!-- Using particles as cloud droplets requires sorting after each timestep.
1377	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1378	dt_sort_particles = 0.0
1379	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1380	'_droplets = .TRUE.'
1381	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1382	ENDIF
1383
1384	!
1385	!-- Set the default intervals for data output, if necessary
1386	!-- NOTE: dt_dosp has already been set in package_parin
1387	IF ( dt_data_output /= 9999999.9 ) THEN
1388	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1389	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1390	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1391	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1392	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1393	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1394	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1395	ENDIF
1396
1397	!
1398	!-- Set the default skip time intervals for data output, if necessary
1399	IF ( skip_time_dopr == 9999999.9 ) &
1400	skip_time_dopr = skip_time_data_output
1401	IF ( skip_time_dosp == 9999999.9 ) &
1402	skip_time_dosp = skip_time_data_output
1403	IF ( skip_time_do2d_xy == 9999999.9 ) &
1404	skip_time_do2d_xy = skip_time_data_output
1405	IF ( skip_time_do2d_xz == 9999999.9 ) &
1406	skip_time_do2d_xz = skip_time_data_output
1407	IF ( skip_time_do2d_yz == 9999999.9 ) &
1408	skip_time_do2d_yz = skip_time_data_output
1409	IF ( skip_time_do3d == 9999999.9 ) &
1410	skip_time_do3d = skip_time_data_output
1411	IF ( skip_time_data_output_av == 9999999.9 ) &
1412	skip_time_data_output_av = skip_time_data_output
1413
1414	!
1415	!-- Check the average intervals (first for 3d-data, then for profiles and
1416	!-- spectra)
1417	IF ( averaging_interval > dt_data_output_av ) THEN
1418	WRITE( message_string, * ) 'averaging_interval = ', &
1419	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1420	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1421	ENDIF
1422
1423	IF ( averaging_interval_pr == 9999999.9 ) THEN
1424	averaging_interval_pr = averaging_interval
1425	ENDIF
1426
1427	IF ( averaging_interval_pr > dt_dopr ) THEN
1428	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1429	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1430	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1431	ENDIF
1432
1433	IF ( averaging_interval_sp == 9999999.9 ) THEN
1434	averaging_interval_sp = averaging_interval
1435	ENDIF
1436
1437	IF ( averaging_interval_sp > dt_dosp ) THEN
1438	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1439	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1440	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1441	ENDIF
1442
1443	!
1444	!-- Set the default interval for profiles entering the temporal average
1445	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1446	dt_averaging_input_pr = dt_averaging_input
1447	ENDIF
1448
1449	!
1450	!-- Set the default interval for the output of timeseries to a reasonable
1451	!-- value (tries to minimize the number of calls of flow_statistics)
1452	IF ( dt_dots == 9999999.9 ) THEN
1453	IF ( averaging_interval_pr == 0.0 ) THEN
1454	dt_dots = MIN( dt_run_control, dt_dopr )
1455	ELSE
1456	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1457	ENDIF
1458	ENDIF
1459
1460	!
1461	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1462	IF ( dt_averaging_input > averaging_interval ) THEN
1463	WRITE( message_string, * ) 'dt_averaging_input = ', &
1464	dt_averaging_input, ' must be <= averaging_interval = ', &
1465	averaging_interval
1466	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1467	ENDIF
1468
1469	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1470	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1471	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1472	averaging_interval_pr
1473	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1474	ENDIF
1475
1476	!
1477	!-- Set the default value for the integration interval of precipitation amount
1478	IF ( precipitation ) THEN
1479	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1480	precipitation_amount_interval = dt_do2d_xy
1481	ELSE
1482	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1483	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1484	precipitation_amount_interval, ' must not be larger than ', &
1485	'dt_do2d_xy = ', dt_do2d_xy
1486	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1487	ENDIF
1488	ENDIF
1489	ENDIF
1490
1491	!
1492	!-- Determine the number of output profiles and check whether they are
1493	!-- permissible
1494	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1495
1496	dopr_n = dopr_n + 1
1497	i = dopr_n
1498
1499	!
1500	!-- Determine internal profile number (for hom, homs)
1501	!-- and store height levels
1502	SELECT CASE ( TRIM( data_output_pr(i) ) )
1503
1504	CASE ( 'u', '#u' )
1505	dopr_index(i) = 1
1506	dopr_unit(i) = 'm/s'
1507	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1508	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1509	dopr_initial_index(i) = 5
1510	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1511	data_output_pr(i) = data_output_pr(i)(2:)
1512	ENDIF
1513
1514	CASE ( 'v', '#v' )
1515	dopr_index(i) = 2
1516	dopr_unit(i) = 'm/s'
1517	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1518	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1519	dopr_initial_index(i) = 6
1520	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1521	data_output_pr(i) = data_output_pr(i)(2:)
1522	ENDIF
1523
1524	CASE ( 'w' )
1525	dopr_index(i) = 3
1526	dopr_unit(i) = 'm/s'
1527	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1528
1529	CASE ( 'pt', '#pt' )
1530	IF ( .NOT. cloud_physics ) THEN
1531	dopr_index(i) = 4
1532	dopr_unit(i) = 'K'
1533	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1534	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1535	dopr_initial_index(i) = 7
1536	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1537	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1538	data_output_pr(i) = data_output_pr(i)(2:)
1539	ENDIF
1540	ELSE
1541	dopr_index(i) = 43
1542	dopr_unit(i) = 'K'
1543	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1544	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1545	dopr_initial_index(i) = 28
1546	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1547	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1548	data_output_pr(i) = data_output_pr(i)(2:)
1549	ENDIF
1550	ENDIF
1551
1552	CASE ( 'e' )
1553	dopr_index(i) = 8
1554	dopr_unit(i) = 'm2/s2'
1555	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1556	hom(nzb,2,8,:) = 0.0
1557
1558	CASE ( 'km', '#km' )
1559	dopr_index(i) = 9
1560	dopr_unit(i) = 'm2/s'
1561	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1562	hom(nzb,2,9,:) = 0.0
1563	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1564	dopr_initial_index(i) = 23
1565	hom(:,2,23,:) = hom(:,2,9,:)
1566	data_output_pr(i) = data_output_pr(i)(2:)
1567	ENDIF
1568
1569	CASE ( 'kh', '#kh' )
1570	dopr_index(i) = 10
1571	dopr_unit(i) = 'm2/s'
1572	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1573	hom(nzb,2,10,:) = 0.0
1574	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1575	dopr_initial_index(i) = 24
1576	hom(:,2,24,:) = hom(:,2,10,:)
1577	data_output_pr(i) = data_output_pr(i)(2:)
1578	ENDIF
1579
1580	CASE ( 'l', '#l' )
1581	dopr_index(i) = 11
1582	dopr_unit(i) = 'm'
1583	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1584	hom(nzb,2,11,:) = 0.0
1585	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1586	dopr_initial_index(i) = 25
1587	hom(:,2,25,:) = hom(:,2,11,:)
1588	data_output_pr(i) = data_output_pr(i)(2:)
1589	ENDIF
1590
1591	CASE ( 'w"u"' )
1592	dopr_index(i) = 12
1593	dopr_unit(i) = 'm2/s2'
1594	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1595	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1596
1597	CASE ( 'wu' )
1598	dopr_index(i) = 13
1599	dopr_unit(i) = 'm2/s2'
1600	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1601
1602	CASE ( 'w"v"' )
1603	dopr_index(i) = 14
1604	dopr_unit(i) = 'm2/s2'
1605	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1606	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1607
1608	CASE ( 'wv' )
1609	dopr_index(i) = 15
1610	dopr_unit(i) = 'm2/s2'
1611	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1612
1613	CASE ( 'w"pt"' )
1614	dopr_index(i) = 16
1615	dopr_unit(i) = 'K m/s'
1616	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1617
1618	CASE ( 'wpt' )
1619	dopr_index(i) = 17
1620	dopr_unit(i) = 'K m/s'
1621	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1622
1623	CASE ( 'wpt' )
1624	dopr_index(i) = 18
1625	dopr_unit(i) = 'K m/s'
1626	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1627
1628	CASE ( 'wu' )
1629	dopr_index(i) = 19
1630	dopr_unit(i) = 'm2/s2'
1631	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1632	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1633
1634	CASE ( 'wv' )
1635	dopr_index(i) = 20
1636	dopr_unit(i) = 'm2/s2'
1637	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1638	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1639
1640	CASE ( 'wptBC' )
1641	dopr_index(i) = 21
1642	dopr_unit(i) = 'K m/s'
1643	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1644
1645	CASE ( 'wptBC' )
1646	dopr_index(i) = 22
1647	dopr_unit(i) = 'K m/s'
1648	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1649
1650	CASE ( 'sa', '#sa' )
1651	IF ( .NOT. ocean ) THEN
1652	message_string = 'data_output_pr = ' // &
1653	TRIM( data_output_pr(i) ) // ' is not imp' // &
1654	'lemented for ocean = .FALSE.'
1655	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1656	ELSE
1657	dopr_index(i) = 23
1658	dopr_unit(i) = 'psu'
1659	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1660	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1661	dopr_initial_index(i) = 26
1662	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1663	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1664	data_output_pr(i) = data_output_pr(i)(2:)
1665	ENDIF
1666	ENDIF
1667
1668	CASE ( 'u*2' )
1669	dopr_index(i) = 30
1670	dopr_unit(i) = 'm2/s2'
1671	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1672
1673	CASE ( 'v*2' )
1674	dopr_index(i) = 31
1675	dopr_unit(i) = 'm2/s2'
1676	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1677
1678	CASE ( 'w*2' )
1679	dopr_index(i) = 32
1680	dopr_unit(i) = 'm2/s2'
1681	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1682
1683	CASE ( 'pt*2' )
1684	dopr_index(i) = 33
1685	dopr_unit(i) = 'K2'
1686	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1687
1688	CASE ( 'e*' )
1689	dopr_index(i) = 34
1690	dopr_unit(i) = 'm2/s2'
1691	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1692
1693	CASE ( 'w2pt' )
1694	dopr_index(i) = 35
1695	dopr_unit(i) = 'K m2/s2'
1696	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1697
1698	CASE ( 'wpt2' )
1699	dopr_index(i) = 36
1700	dopr_unit(i) = 'K2 m/s'
1701	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1702
1703	CASE ( 'we' )
1704	dopr_index(i) = 37
1705	dopr_unit(i) = 'm3/s3'
1706	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1707
1708	CASE ( 'w*3' )
1709	dopr_index(i) = 38
1710	dopr_unit(i) = 'm3/s3'
1711	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1712
1713	CASE ( 'Sw' )
1714	dopr_index(i) = 39
1715	dopr_unit(i) = 'none'
1716	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1717
1718	CASE ( 'p' )
1719	dopr_index(i) = 40
1720	dopr_unit(i) = 'Pa'
1721	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1722
1723	CASE ( 'q', '#q' )
1724	IF ( .NOT. humidity ) THEN
1725	message_string = 'data_output_pr = ' // &
1726	TRIM( data_output_pr(i) ) // ' is not imp' // &
1727	'lemented for humidity = .FALSE.'
1728	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1729	ELSE
1730	dopr_index(i) = 41
1731	dopr_unit(i) = 'kg/kg'
1732	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1733	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1734	dopr_initial_index(i) = 26
1735	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1736	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1737	data_output_pr(i) = data_output_pr(i)(2:)
1738	ENDIF
1739	ENDIF
1740
1741	CASE ( 's', '#s' )
1742	IF ( .NOT. passive_scalar ) THEN
1743	message_string = 'data_output_pr = ' // &
1744	TRIM( data_output_pr(i) ) // ' is not imp' // &
1745	'lemented for passive_scalar = .FALSE.'
1746	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1747	ELSE
1748	dopr_index(i) = 41
1749	dopr_unit(i) = 'kg/m3'
1750	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1751	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1752	dopr_initial_index(i) = 26
1753	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1754	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1755	data_output_pr(i) = data_output_pr(i)(2:)
1756	ENDIF
1757	ENDIF
1758
1759	CASE ( 'qv', '#qv' )
1760	IF ( .NOT. cloud_physics ) THEN
1761	dopr_index(i) = 41
1762	dopr_unit(i) = 'kg/kg'
1763	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1764	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1765	dopr_initial_index(i) = 26
1766	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1767	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1768	data_output_pr(i) = data_output_pr(i)(2:)
1769	ENDIF
1770	ELSE
1771	dopr_index(i) = 42
1772	dopr_unit(i) = 'kg/kg'
1773	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1774	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1775	dopr_initial_index(i) = 27
1776	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1777	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1778	data_output_pr(i) = data_output_pr(i)(2:)
1779	ENDIF
1780	ENDIF
1781
1782	CASE ( 'lpt', '#lpt' )
1783	IF ( .NOT. cloud_physics ) THEN
1784	message_string = 'data_output_pr = ' // &
1785	TRIM( data_output_pr(i) ) // ' is not imp' // &
1786	'lemented for cloud_physics = .FALSE.'
1787	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1788	ELSE
1789	dopr_index(i) = 4
1790	dopr_unit(i) = 'K'
1791	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1792	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1793	dopr_initial_index(i) = 7
1794	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1795	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1796	data_output_pr(i) = data_output_pr(i)(2:)
1797	ENDIF
1798	ENDIF
1799
1800	CASE ( 'vpt', '#vpt' )
1801	dopr_index(i) = 44
1802	dopr_unit(i) = 'K'
1803	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1804	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1805	dopr_initial_index(i) = 29
1806	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1807	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1808	data_output_pr(i) = data_output_pr(i)(2:)
1809	ENDIF
1810
1811	CASE ( 'w"vpt"' )
1812	dopr_index(i) = 45
1813	dopr_unit(i) = 'K m/s'
1814	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1815
1816	CASE ( 'wvpt' )
1817	dopr_index(i) = 46
1818	dopr_unit(i) = 'K m/s'
1819	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1820
1821	CASE ( 'wvpt' )
1822	dopr_index(i) = 47
1823	dopr_unit(i) = 'K m/s'
1824	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1825
1826	CASE ( 'w"q"' )
1827	IF ( .NOT. humidity ) THEN
1828	message_string = 'data_output_pr = ' // &
1829	TRIM( data_output_pr(i) ) // ' is not imp' // &
1830	'lemented for humidity = .FALSE.'
1831	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1832	ELSE
1833	dopr_index(i) = 48
1834	dopr_unit(i) = 'kg/kg m/s'
1835	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1836	ENDIF
1837
1838	CASE ( 'wq' )
1839	IF ( .NOT. humidity ) THEN
1840	message_string = 'data_output_pr = ' // &
1841	TRIM( data_output_pr(i) ) // ' is not imp' // &
1842	'lemented for humidity = .FALSE.'
1843	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1844	ELSE
1845	dopr_index(i) = 49
1846	dopr_unit(i) = 'kg/kg m/s'
1847	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1848	ENDIF
1849
1850	CASE ( 'wq' )
1851	IF ( .NOT. humidity ) THEN
1852	message_string = 'data_output_pr = ' // &
1853	TRIM( data_output_pr(i) ) // ' is not imp' // &
1854	'lemented for humidity = .FALSE.'
1855	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1856	ELSE
1857	dopr_index(i) = 50
1858	dopr_unit(i) = 'kg/kg m/s'
1859	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1860	ENDIF
1861
1862	CASE ( 'w"s"' )
1863	IF ( .NOT. passive_scalar ) THEN
1864	message_string = 'data_output_pr = ' // &
1865	TRIM( data_output_pr(i) ) // ' is not imp' // &
1866	'lemented for passive_scalar = .FALSE.'
1867	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1868	ELSE
1869	dopr_index(i) = 48
1870	dopr_unit(i) = 'kg/m3 m/s'
1871	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1872	ENDIF
1873
1874	CASE ( 'ws' )
1875	IF ( .NOT. passive_scalar ) THEN
1876	message_string = 'data_output_pr = ' // &
1877	TRIM( data_output_pr(i) ) // ' is not imp' // &
1878	'lemented for passive_scalar = .FALSE.'
1879	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1880	ELSE
1881	dopr_index(i) = 49
1882	dopr_unit(i) = 'kg/m3 m/s'
1883	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1884	ENDIF
1885
1886	CASE ( 'ws' )
1887	IF ( .NOT. passive_scalar ) THEN
1888	message_string = 'data_output_pr = ' // &
1889	TRIM( data_output_pr(i) ) // ' is not imp' // &
1890	'lemented for passive_scalar = .FALSE.'
1891	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1892	ELSE
1893	dopr_index(i) = 50
1894	dopr_unit(i) = 'kg/m3 m/s'
1895	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1896	ENDIF
1897
1898	CASE ( 'w"qv"' )
1899	IF ( humidity .AND. .NOT. cloud_physics ) &
1900	THEN
1901	dopr_index(i) = 48
1902	dopr_unit(i) = 'kg/kg m/s'
1903	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1904	ELSEIF( humidity .AND. cloud_physics ) THEN
1905	dopr_index(i) = 51
1906	dopr_unit(i) = 'kg/kg m/s'
1907	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1908	ELSE
1909	message_string = 'data_output_pr = ' // &
1910	TRIM( data_output_pr(i) ) // ' is not imp' // &
1911	'lemented for cloud_physics = .FALSE. an&' // &
1912	'd humidity = .FALSE.'
1913	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1914	ENDIF
1915
1916	CASE ( 'wqv' )
1917	IF ( humidity .AND. .NOT. cloud_physics ) &
1918	THEN
1919	dopr_index(i) = 49
1920	dopr_unit(i) = 'kg/kg m/s'
1921	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1922	ELSEIF( humidity .AND. cloud_physics ) THEN
1923	dopr_index(i) = 52
1924	dopr_unit(i) = 'kg/kg m/s'
1925	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1926	ELSE
1927	message_string = 'data_output_pr = ' // &
1928	TRIM( data_output_pr(i) ) // ' is not imp' // &
1929	'lemented for cloud_physics = .FALSE. an&' // &
1930	'd humidity = .FALSE.'
1931	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1932	ENDIF
1933
1934	CASE ( 'wqv' )
1935	IF ( humidity .AND. .NOT. cloud_physics ) &
1936	THEN
1937	dopr_index(i) = 50
1938	dopr_unit(i) = 'kg/kg m/s'
1939	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1940	ELSEIF( humidity .AND. cloud_physics ) THEN
1941	dopr_index(i) = 53
1942	dopr_unit(i) = 'kg/kg m/s'
1943	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
1944	ELSE
1945	message_string = 'data_output_pr = ' // &
1946	TRIM( data_output_pr(i) ) // ' is not imp' // &
1947	'lemented for cloud_physics = .FALSE. an&' // &
1948	'd humidity = .FALSE.'
1949	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1950	ENDIF
1951
1952	CASE ( 'ql' )
1953	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
1954	message_string = 'data_output_pr = ' // &
1955	TRIM( data_output_pr(i) ) // ' is not imp' // &
1956	'lemented for cloud_physics = .FALSE. or' // &
1957	'&cloud_droplets = .FALSE.'
1958	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
1959	ELSE
1960	dopr_index(i) = 54
1961	dopr_unit(i) = 'kg/kg'
1962	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
1963	ENDIF
1964
1965	CASE ( 'wuu*/dz' )
1966	dopr_index(i) = 55
1967	dopr_unit(i) = 'm2/s3'
1968	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
1969
1970	CASE ( 'wp/dz' )
1971	dopr_index(i) = 56
1972	dopr_unit(i) = 'm2/s3'
1973	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
1974
1975	CASE ( 'w"e/dz' )
1976	dopr_index(i) = 57
1977	dopr_unit(i) = 'm2/s3'
1978	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
1979
1980	CASE ( 'u"pt"' )
1981	dopr_index(i) = 58
1982	dopr_unit(i) = 'K m/s'
1983	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
1984
1985	CASE ( 'upt' )
1986	dopr_index(i) = 59
1987	dopr_unit(i) = 'K m/s'
1988	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
1989
1990	CASE ( 'upt_t' )
1991	dopr_index(i) = 60
1992	dopr_unit(i) = 'K m/s'
1993	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
1994
1995	CASE ( 'v"pt"' )
1996	dopr_index(i) = 61
1997	dopr_unit(i) = 'K m/s'
1998	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
1999
2000	CASE ( 'vpt' )
2001	dopr_index(i) = 62
2002	dopr_unit(i) = 'K m/s'
2003	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2004
2005	CASE ( 'vpt_t' )
2006	dopr_index(i) = 63
2007	dopr_unit(i) = 'K m/s'
2008	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2009
2010	CASE ( 'rho' )
2011	dopr_index(i) = 64
2012	dopr_unit(i) = 'kg/m3'
2013	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2014
2015	CASE ( 'w"sa"' )
2016	IF ( .NOT. ocean ) THEN
2017	message_string = 'data_output_pr = ' // &
2018	TRIM( data_output_pr(i) ) // ' is not imp' // &
2019	'lemented for ocean = .FALSE.'
2020	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2021	ELSE
2022	dopr_index(i) = 65
2023	dopr_unit(i) = 'psu m/s'
2024	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2025	ENDIF
2026
2027	CASE ( 'wsa' )
2028	IF ( .NOT. ocean ) THEN
2029	message_string = 'data_output_pr = ' // &
2030	TRIM( data_output_pr(i) ) // ' is not imp' // &
2031	'lemented for ocean = .FALSE.'
2032	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2033	ELSE
2034	dopr_index(i) = 66
2035	dopr_unit(i) = 'psu m/s'
2036	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2037	ENDIF
2038
2039	CASE ( 'wsa' )
2040	IF ( .NOT. ocean ) THEN
2041	message_string = 'data_output_pr = ' // &
2042	TRIM( data_output_pr(i) ) // ' is not imp' // &
2043	'lemented for ocean = .FALSE.'
2044	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2045	ELSE
2046	dopr_index(i) = 67
2047	dopr_unit(i) = 'psu m/s'
2048	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2049	ENDIF
2050
2051	CASE ( 'wp' )
2052	dopr_index(i) = 68
2053	dopr_unit(i) = 'm3/s3'
2054	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2055
2056	CASE ( 'w"e' )
2057	dopr_index(i) = 69
2058	dopr_unit(i) = 'm3/s3'
2059	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2060
2061	CASE ( 'q*2' )
2062	IF ( .NOT. humidity ) THEN
2063	message_string = 'data_output_pr = ' // &
2064	TRIM( data_output_pr(i) ) // ' is not imp' // &
2065	'lemented for humidity = .FALSE.'
2066	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2067	ELSE
2068	dopr_index(i) = 70
2069	dopr_unit(i) = 'kg2/kg2'
2070	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2071	ENDIF
2072
2073	CASE DEFAULT
2074
2075	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2076
2077	IF ( unit == 'illegal' ) THEN
2078	IF ( data_output_pr_user(1) /= ' ' ) THEN
2079	message_string = 'illegal value for data_output_pr or ' // &
2080	'data_output_pr_user = "' // &
2081	TRIM( data_output_pr(i) ) // '"'
2082	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2083	ELSE
2084	message_string = 'illegal value for data_output_pr = "' // &
2085	TRIM( data_output_pr(i) ) // '"'
2086	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2087	ENDIF
2088	ENDIF
2089
2090	END SELECT
2091	!
2092	!-- Check to which of the predefined coordinate systems the profile belongs
2093	DO k = 1, crmax
2094	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2095	/=0 ) &
2096	THEN
2097	dopr_crossindex(i) = k
2098	EXIT
2099	ENDIF
2100	ENDDO
2101	!
2102	!-- Generate the text for the labels of the PROFIL output file. "-characters
2103	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2104	!-- control characters
2105	dopr_label(i) = data_output_pr(i)
2106	position = INDEX( dopr_label(i) , '"' )
2107	DO WHILE ( position /= 0 )
2108	dopr_label(i)(position:position) = ''''
2109	position = INDEX( dopr_label(i) , '"' )
2110	ENDDO
2111
2112	ENDDO
2113
2114	!
2115	!-- y-value range of the coordinate system (PROFIL).
2116	!-- x-value range determined in plot_1d.
2117	IF ( .NOT. ocean ) THEN
2118	cross_uymin = 0.0
2119	IF ( z_max_do1d == -1.0 ) THEN
2120	cross_uymax = zu(nzt+1)
2121	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2122	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2123	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2124	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2125	ELSE
2126	cross_uymax = z_max_do1d
2127	ENDIF
2128	ENDIF
2129
2130	!
2131	!-- Check whether the chosen normalizing factor for the coordinate systems is
2132	!-- permissible
2133	DO i = 1, crmax
2134	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2135
2136	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2137	j = 0
2138
2139	CASE DEFAULT
2140	message_string = 'unknown normalization method cross_normali' // &
2141	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2142	'"'
2143	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2144
2145	END SELECT
2146	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2147
2148	CASE ( '', 'z_i' )
2149	j = 0
2150
2151	CASE DEFAULT
2152	message_string = 'unknown normalization method cross_normali' // &
2153	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2154	'"'
2155	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2156
2157	END SELECT
2158	ENDDO
2159	!
2160	!-- Check normalized y-value range of the coordinate system (PROFIL)
2161	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2162	THEN
2163	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2164	z_max_do1d_normalized, ' must be >= 0.0'
2165	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2166	ENDIF
2167
2168
2169	!
2170	!-- Append user-defined data output variables to the standard data output
2171	IF ( data_output_user(1) /= ' ' ) THEN
2172	i = 1
2173	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2174	i = i + 1
2175	ENDDO
2176	j = 1
2177	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2178	IF ( i > 100 ) THEN
2179	message_string = 'number of output quantitities given by data' // &
2180	'_output and data_output_user exceeds the limit of 100'
2181	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2182	ENDIF
2183	data_output(i) = data_output_user(j)
2184	i = i + 1
2185	j = j + 1
2186	ENDDO
2187	ENDIF
2188
2189	!
2190	!-- Check and set steering parameters for 2d/3d data output and averaging
2191	i = 1
2192	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2193	!
2194	!-- Check for data averaging
2195	ilen = LEN_TRIM( data_output(i) )
2196	j = 0 ! no data averaging
2197	IF ( ilen > 3 ) THEN
2198	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2199	j = 1 ! data averaging
2200	data_output(i) = data_output(i)(1:ilen-3)
2201	ENDIF
2202	ENDIF
2203	!
2204	!-- Check for cross section or volume data
2205	ilen = LEN_TRIM( data_output(i) )
2206	k = 0 ! 3d data
2207	var = data_output(i)(1:ilen)
2208	IF ( ilen > 3 ) THEN
2209	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2210	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2211	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2212	k = 1 ! 2d data
2213	var = data_output(i)(1:ilen-3)
2214	ENDIF
2215	ENDIF
2216	!
2217	!-- Check for allowed value and set units
2218	SELECT CASE ( TRIM( var ) )
2219
2220	CASE ( 'e' )
2221	IF ( constant_diffusion ) THEN
2222	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2223	'res constant_diffusion = .FALSE.'
2224	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2225	ENDIF
2226	unit = 'm2/s2'
2227
2228	CASE ( 'pc', 'pr' )
2229	IF ( .NOT. particle_advection ) THEN
2230	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2231	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2232	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2233	ENDIF
2234	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2235	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2236
2237	CASE ( 'q', 'vpt' )
2238	IF ( .NOT. humidity ) THEN
2239	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2240	'res humidity = .TRUE.'
2241	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2242	ENDIF
2243	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2244	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2245
2246	CASE ( 'ql' )
2247	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2248	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2249	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2250	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2251	ENDIF
2252	unit = 'kg/kg'
2253
2254	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2255	IF ( .NOT. cloud_droplets ) THEN
2256	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2257	'res cloud_droplets = .TRUE.'
2258	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2259	ENDIF
2260	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2261	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2262	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2263
2264	CASE ( 'qv' )
2265	IF ( .NOT. cloud_physics ) THEN
2266	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2267	'res cloud_physics = .TRUE.'
2268	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2269	ENDIF
2270	unit = 'kg/kg'
2271
2272	CASE ( 'rho' )
2273	IF ( .NOT. ocean ) THEN
2274	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2275	'res ocean = .TRUE.'
2276	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2277	ENDIF
2278	unit = 'kg/m3'
2279
2280	CASE ( 's' )
2281	IF ( .NOT. passive_scalar ) THEN
2282	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2283	'res passive_scalar = .TRUE.'
2284	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2285	ENDIF
2286	unit = 'conc'
2287
2288	CASE ( 'sa' )
2289	IF ( .NOT. ocean ) THEN
2290	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2291	'res ocean = .TRUE.'
2292	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2293	ENDIF
2294	unit = 'psu'
2295
2296	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2297	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2298	message_string = 'illegal value for data_output: "' // &
2299	TRIM( var ) // '" & only 2d-horizontal ' // &
2300	'cross sections are allowed for this value'
2301	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2302	ENDIF
2303	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2304	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2305	'res cloud_physics = .TRUE.'
2306	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2307	ENDIF
2308	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2309	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2310	'res precipitation = .TRUE.'
2311	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2312	ENDIF
2313	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2314	message_string = 'temporal averaging of precipitation ' // &
2315	'amount "' // TRIM( var ) // '" is not possible'
2316	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2317	ENDIF
2318	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2319	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2320	'res precipitation = .TRUE.'
2321	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2322	ENDIF
2323
2324
2325	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2326	IF ( TRIM( var ) == 't*' ) unit = 'K'
2327	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2328	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2329	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2330	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2331
2332	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2333	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2334	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2335	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2336	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2337	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2338	CONTINUE
2339
2340	CASE DEFAULT
2341	CALL user_check_data_output( var, unit )
2342
2343	IF ( unit == 'illegal' ) THEN
2344	IF ( data_output_user(1) /= ' ' ) THEN
2345	message_string = 'illegal value for data_output or ' // &
2346	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2347	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2348	ELSE
2349	message_string = 'illegal value for data_output =' // &
2350	TRIM( data_output(i) ) // '"'
2351	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2352	ENDIF
2353	ENDIF
2354
2355	END SELECT
2356	!
2357	!-- Set the internal steering parameters appropriately
2358	IF ( k == 0 ) THEN
2359	do3d_no(j) = do3d_no(j) + 1
2360	do3d(j,do3d_no(j)) = data_output(i)
2361	do3d_unit(j,do3d_no(j)) = unit
2362	ELSE
2363	do2d_no(j) = do2d_no(j) + 1
2364	do2d(j,do2d_no(j)) = data_output(i)
2365	do2d_unit(j,do2d_no(j)) = unit
2366	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2367	data_output_xy(j) = .TRUE.
2368	ENDIF
2369	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2370	data_output_xz(j) = .TRUE.
2371	ENDIF
2372	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2373	data_output_yz(j) = .TRUE.
2374	ENDIF
2375	ENDIF
2376
2377	IF ( j == 1 ) THEN
2378	!
2379	!-- Check, if variable is already subject to averaging
2380	found = .FALSE.
2381	DO k = 1, doav_n
2382	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2383	ENDDO
2384
2385	IF ( .NOT. found ) THEN
2386	doav_n = doav_n + 1
2387	doav(doav_n) = var
2388	ENDIF
2389	ENDIF
2390
2391	i = i + 1
2392	ENDDO
2393
2394	!
2395	!-- Store sectional planes in one shared array
2396	section(:,1) = section_xy
2397	section(:,2) = section_xz
2398	section(:,3) = section_yz
2399
2400	!
2401	!-- Upper plot limit (grid point value) for 1D profiles
2402	IF ( z_max_do1d == -1.0 ) THEN
2403	nz_do1d = nzt+1
2404	ELSE
2405	DO k = nzb+1, nzt+1
2406	nz_do1d = k
2407	IF ( zw(k) > z_max_do1d ) EXIT
2408	ENDDO
2409	ENDIF
2410
2411	!
2412	!-- Upper plot limit for 2D vertical sections
2413	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2414	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2415	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2416	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2417	' (zu(nzt))'
2418	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2419	ENDIF
2420
2421	!
2422	!-- Upper plot limit for 3D arrays
2423	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2424
2425	!
2426	!-- Determine and check accuracy for compressed 3D plot output
2427	IF ( do3d_compress ) THEN
2428	!
2429	!-- Compression only permissible on T3E machines
2430	IF ( host(1:3) /= 't3e' ) THEN
2431	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2432	TRIM( host ) // '"'
2433	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2434	ENDIF
2435
2436	i = 1
2437	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2438
2439	ilen = LEN_TRIM( do3d_comp_prec(i) )
2440	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2441	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2442	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2443	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2444	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2445	ENDIF
2446
2447	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2448	var = do3d_comp_prec(i)(1:ilen-1)
2449
2450	SELECT CASE ( var )
2451
2452	CASE ( 'u' )
2453	j = 1
2454	CASE ( 'v' )
2455	j = 2
2456	CASE ( 'w' )
2457	j = 3
2458	CASE ( 'p' )
2459	j = 4
2460	CASE ( 'pt' )
2461	j = 5
2462
2463	CASE DEFAULT
2464	WRITE( message_string, * ) 'unknown variable "', &
2465	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2466	i, ')'
2467	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2468
2469	END SELECT
2470
2471	plot_3d_precision(j)%precision = prec
2472	i = i + 1
2473
2474	ENDDO
2475	ENDIF
2476
2477	!
2478	!-- Check the data output format(s)
2479	IF ( data_output_format(1) == ' ' ) THEN
2480	!
2481	!-- Default value
2482	netcdf_output = .TRUE.
2483	ELSE
2484	i = 1
2485	DO WHILE ( data_output_format(i) /= ' ' )
2486
2487	SELECT CASE ( data_output_format(i) )
2488
2489	CASE ( 'netcdf' )
2490	netcdf_output = .TRUE.
2491	CASE ( 'iso2d' )
2492	iso2d_output = .TRUE.
2493	CASE ( 'profil' )
2494	profil_output = .TRUE.
2495	CASE ( 'avs' )
2496	avs_output = .TRUE.
2497
2498	CASE DEFAULT
2499	message_string = 'unknown value for data_output_format "' // &
2500	TRIM( data_output_format(i) ) // '"'
2501	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2502
2503	END SELECT
2504
2505	i = i + 1
2506	IF ( i > 10 ) EXIT
2507
2508	ENDDO
2509
2510	ENDIF
2511
2512	!
2513	!-- Check netcdf precison
2514	ldum = .FALSE.
2515	CALL define_netcdf_header( 'ch', ldum, 0 )
2516
2517	!
2518	!-- Check, whether a constant diffusion coefficient shall be used
2519	IF ( km_constant /= -1.0 ) THEN
2520	IF ( km_constant < 0.0 ) THEN
2521	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2522	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2523	ELSE
2524	IF ( prandtl_number < 0.0 ) THEN
2525	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2526	' < 0.0'
2527	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2528	ENDIF
2529	constant_diffusion = .TRUE.
2530
2531	IF ( prandtl_layer ) THEN
2532	message_string = 'prandtl_layer is not allowed with fixed ' // &
2533	'value of km'
2534	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2535	ENDIF
2536	ENDIF
2537	ENDIF
2538
2539	!
2540	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2541	!-- for the horizontal diffusivity used within the outflow damping layer,
2542	!-- and check/set the width of the damping layer
2543	IF ( bc_lr /= 'cyclic' ) THEN
2544	IF ( km_damp_max == -1.0 ) THEN
2545	km_damp_max = 0.5 * dx
2546	ENDIF
2547	IF ( outflow_damping_width == -1.0 ) THEN
2548	outflow_damping_width = MIN( 20, nx/2 )
2549	ENDIF
2550	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2551	message_string = 'outflow_damping width out of range'
2552	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2553	ENDIF
2554	ENDIF
2555
2556	IF ( bc_ns /= 'cyclic' ) THEN
2557	IF ( km_damp_max == -1.0 ) THEN
2558	km_damp_max = 0.5 * dy
2559	ENDIF
2560	IF ( outflow_damping_width == -1.0 ) THEN
2561	outflow_damping_width = MIN( 20, ny/2 )
2562	ENDIF
2563	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2564	message_string = 'outflow_damping width out of range'
2565	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2566	ENDIF
2567	ENDIF
2568
2569	!
2570	!-- Check value range for rif
2571	IF ( rif_min >= rif_max ) THEN
2572	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2573	'than rif_max = ', rif_max
2574	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2575	ENDIF
2576
2577	!
2578	!-- Determine upper and lower hight level indices for random perturbations
2579	IF ( disturbance_level_b == -9999999.9 ) THEN
2580	IF ( ocean ) THEN
2581	disturbance_level_b = zu((nzt*2)/3)
2582	disturbance_level_ind_b = ( nzt * 2 ) / 3
2583	ELSE
2584	disturbance_level_b = zu(nzb+3)
2585	disturbance_level_ind_b = nzb + 3
2586	ENDIF
2587	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2588	WRITE( message_string, * ) 'disturbance_level_b = ', &
2589	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2590	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2591	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2592	WRITE( message_string, * ) 'disturbance_level_b = ', &
2593	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2594	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2595	ELSE
2596	DO k = 3, nzt-2
2597	IF ( disturbance_level_b <= zu(k) ) THEN
2598	disturbance_level_ind_b = k
2599	EXIT
2600	ENDIF
2601	ENDDO
2602	ENDIF
2603
2604	IF ( disturbance_level_t == -9999999.9 ) THEN
2605	IF ( ocean ) THEN
2606	disturbance_level_t = zu(nzt-3)
2607	disturbance_level_ind_t = nzt - 3
2608	ELSE
2609	disturbance_level_t = zu(nzt/3)
2610	disturbance_level_ind_t = nzt / 3
2611	ENDIF
2612	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2613	WRITE( message_string, * ) 'disturbance_level_t = ', &
2614	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2615	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2616	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2617	WRITE( message_string, * ) 'disturbance_level_t = ', &
2618	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2619	disturbance_level_b
2620	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2621	ELSE
2622	DO k = 3, nzt-2
2623	IF ( disturbance_level_t <= zu(k) ) THEN
2624	disturbance_level_ind_t = k
2625	EXIT
2626	ENDIF
2627	ENDDO
2628	ENDIF
2629
2630	!
2631	!-- Check again whether the levels determined this way are ok.
2632	!-- Error may occur at automatic determination and too few grid points in
2633	!-- z-direction.
2634	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2635	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2636	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2637	disturbance_level_b
2638	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2639	ENDIF
2640
2641	!
2642	!-- Determine the horizontal index range for random perturbations.
2643	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2644	!-- near the inflow and the perturbation area is further limited to ...(1)
2645	!-- after the initial phase of the flow.
2646	dist_nxl = 0; dist_nxr = nx
2647	dist_nys = 0; dist_nyn = ny
2648	IF ( bc_lr /= 'cyclic' ) THEN
2649	IF ( inflow_disturbance_begin == -1 ) THEN
2650	inflow_disturbance_begin = MIN( 10, nx/2 )
2651	ENDIF
2652	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2653	THEN
2654	message_string = 'inflow_disturbance_begin out of range'
2655	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2656	ENDIF
2657	IF ( inflow_disturbance_end == -1 ) THEN
2658	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2659	ENDIF
2660	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2661	THEN
2662	message_string = 'inflow_disturbance_end out of range'
2663	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2664	ENDIF
2665	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2666	IF ( inflow_disturbance_begin == -1 ) THEN
2667	inflow_disturbance_begin = MIN( 10, ny/2 )
2668	ENDIF
2669	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2670	THEN
2671	message_string = 'inflow_disturbance_begin out of range'
2672	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2673	ENDIF
2674	IF ( inflow_disturbance_end == -1 ) THEN
2675	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2676	ENDIF
2677	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2678	THEN
2679	message_string = 'inflow_disturbance_end out of range'
2680	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2681	ENDIF
2682	ENDIF
2683
2684	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2685	dist_nxr = nx - inflow_disturbance_begin
2686	dist_nxl(1) = nx - inflow_disturbance_end
2687	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2688	dist_nxl = inflow_disturbance_begin
2689	dist_nxr(1) = inflow_disturbance_end
2690	ENDIF
2691	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2692	dist_nyn = ny - inflow_disturbance_begin
2693	dist_nys(1) = ny - inflow_disturbance_end
2694	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2695	dist_nys = inflow_disturbance_begin
2696	dist_nyn(1) = inflow_disturbance_end
2697	ENDIF
2698
2699	!
2700	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2701	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2702	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2703	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2704	'condition at the inflow boundary'
2705	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2706	ENDIF
2707
2708	!
2709	!-- In case of turbulent inflow calculate the index of the recycling plane
2710	IF ( turbulent_inflow ) THEN
2711	IF ( recycling_width == 9999999.9 ) THEN
2712	!
2713	!-- Set the default value for the width of the recycling domain
2714	recycling_width = 0.1 * nx * dx
2715	ELSE
2716	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2717	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2718	' ', recycling_width
2719	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2720	ENDIF
2721	ENDIF
2722	!
2723	!-- Calculate the index
2724	recycling_plane = recycling_width / dx
2725	ENDIF
2726
2727	!
2728	!-- Check random generator
2729	IF ( random_generator /= 'system-specific' .AND. &
2730	random_generator /= 'numerical-recipes' ) THEN
2731	message_string = 'unknown random generator: random_generator = "' // &
2732	TRIM( random_generator ) // '"'
2733	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2734	ENDIF
2735
2736	!
2737	!-- Determine damping level index for 1D model
2738	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2739	IF ( damp_level_1d == -1.0 ) THEN
2740	damp_level_1d = zu(nzt+1)
2741	damp_level_ind_1d = nzt + 1
2742	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2743	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2744	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2745	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2746	ELSE
2747	DO k = 1, nzt+1
2748	IF ( damp_level_1d <= zu(k) ) THEN
2749	damp_level_ind_1d = k
2750	EXIT
2751	ENDIF
2752	ENDDO
2753	ENDIF
2754	ENDIF
2755
2756	!
2757	!-- Check some other 1d-model parameters
2758	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2759	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2760	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2761	'" is unknown'
2762	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2763	ENDIF
2764	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2765	TRIM( dissipation_1d ) /= 'detering' ) THEN
2766	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2767	'" is unknown'
2768	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2769	ENDIF
2770
2771	!
2772	!-- Set time for the next user defined restart (time_restart is the
2773	!-- internal parameter for steering restart events)
2774	IF ( restart_time /= 9999999.9 ) THEN
2775	IF ( restart_time > simulated_time ) time_restart = restart_time
2776	ELSE
2777	!
2778	!-- In case of a restart run, set internal parameter to default (no restart)
2779	!-- if the NAMELIST-parameter restart_time is omitted
2780	time_restart = 9999999.9
2781	ENDIF
2782
2783	!
2784	!-- Set default value of the time needed to terminate a model run
2785	IF ( termination_time_needed == -1.0 ) THEN
2786	IF ( host(1:3) == 'ibm' ) THEN
2787	termination_time_needed = 300.0
2788	ELSE
2789	termination_time_needed = 35.0
2790	ENDIF
2791	ENDIF
2792
2793	!
2794	!-- Check the time needed to terminate a model run
2795	IF ( host(1:3) == 't3e' ) THEN
2796	!
2797	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2798	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2799	IF ( termination_time_needed <= 30.0 ) THEN
2800	WRITE( message_string, * ) 'termination_time_needed = ', &
2801	termination_time_needed, ' must be > 30.0 on host "', &
2802	TRIM( host ), '"'
2803	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
2804	ENDIF
2805	ELSEIF ( host(1:3) == 'ibm' ) THEN
2806	!
2807	!-- On IBM-regatta machines the time should be at least 300 seconds,
2808	!-- because the job time consumed before executing palm (for compiling,
2809	!-- copying of files, etc.) has to be regarded
2810	IF ( termination_time_needed < 300.0 ) THEN
2811	WRITE( message_string, * ) 'termination_time_needed = ', &
2812	termination_time_needed, ' should be >= 300.0 on host "', &
2813	TRIM( host ), '"'
2814	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
2815	ENDIF
2816	ENDIF
2817
2818	!
2819	!-- Check pressure gradient conditions
2820	IF ( dp_external .AND. conserve_volume_flow ) THEN
2821	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
2822	' are .TRUE. but one of them must be .FALSE.'
2823	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
2824	ENDIF
2825	IF ( dp_external ) THEN
2826	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
2827	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
2828	' of range'
2829	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
2830	ENDIF
2831	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
2832	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
2833	', i.e. the external pressure gradient & will not be applied'
2834	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
2835	ENDIF
2836	ENDIF
2837	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
2838	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
2839	'.FALSE., i.e. the external pressure gradient & will not be applied'
2840	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
2841	ENDIF
2842	IF ( conserve_volume_flow ) THEN
2843	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
2844	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
2845	conserve_volume_flow_mode = 'inflow_profile'
2846	ELSE
2847	conserve_volume_flow_mode = 'initial_profiles'
2848	ENDIF
2849	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
2850	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
2851	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
2852	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
2853	conserve_volume_flow_mode
2854	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
2855	ENDIF
2856	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
2857	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
2858	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
2859	'require & conserve_volume_flow_mode = ''inflow_profile'''
2860	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
2861	ENDIF
2862	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
2863	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
2864	WRITE( message_string, * ) 'cyclic boundary conditions ', &
2865	'require & conserve_volume_flow_mode = ''initial_profiles''', &
2866	' or ''bulk_velocity'''
2867	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
2868	ENDIF
2869	ENDIF
2870	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
2871	( .NOT. conserve_volume_flow .OR. &
2872	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
2873	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
2874	'conserve_volume_flow = .T. and & ', &
2875	'conserve_volume_flow_mode = ''bulk_velocity'''
2876	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
2877	ENDIF
2878
2879	!
2880	!-- Check &userpar parameters
2881	CALL user_check_parameters
2882
2883
2884	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |