Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 203

Last change on this file since 203 was 198, checked in by raasch, 16 years ago
file headers updated for the next release 3.5
Property svn:keywords set to `Id`
File size: 111.8 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 198 2008-09-17 08:55:28Z raasch $
11	!
12	! 197 2008-09-16 15:29:03Z raasch
13	! Bug fix: Construction of vertical profiles when 10 gradients have been
14	! specified in the parameter list (ug, vg, pt, q, sa, lad)
15	!
16	! Strict grid matching along z is not needed for mg-solver.
17	! Leaf area density (LAD) explicitly set to its surface value at k=0
18	! Case of reading data for recycling included in initializing_actions,
19	! check of turbulent_inflow and calculation of recycling_plane.
20	! q*2 profile added
21	!
22	! 138 2007-11-28 10:03:58Z letzel
23	! Plant canopy added
24	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
25	! Multigrid solver allows topography, checking of dt_sort_particles
26	! Bugfix: initializing u_init and v_init in case of ocean runs
27	!
28	! 109 2007-08-28 15:26:47Z letzel
29	! Check coupling_mode and set default (obligatory) values (like boundary
30	! conditions for temperature and fluxes) in case of coupled runs.
31	! +profiles for wp and w"e
32	! Bugfix: Error message concerning output of particle concentration (pc)
33	! modified
34	! More checks and more default values for coupled runs
35	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
36	! cloud_physics = .T.)
37	! Rayleigh damping for ocean fixed.
38	! Check and, if necessary, set default value for dt_coupling
39	!
40	! 97 2007-06-21 08:23:15Z raasch
41	! Initial salinity profile is calculated, salinity boundary conditions are
42	! checked,
43	! z_max_do1d is checked only in case of ocean = .f.,
44	! +initial temperature and geostrophic velocity profiles for the ocean version,
45	! use_pt_reference renamed use_reference
46	!
47	! 89 2007-05-25 12:08:31Z raasch
48	! Check for user-defined profiles
49	!
50	! 75 2007-03-22 09:54:05Z raasch
51	! "by_user" allowed as initializing action, -data_output_ts,
52	! leapfrog with non-flat topography not allowed any more, loop_optimization
53	! and pt_reference are checked, moisture renamed humidity,
54	! output of precipitation amount/rate and roughnes length + check
55	! possible negative humidities are avoided in initial profile,
56	! dirichlet/neumann changed to dirichlet/radiation, etc.,
57	! revision added to run_description_header
58	!
59	! 20 2007-02-26 00:12:32Z raasch
60	! Temperature and humidity gradients at top are now calculated for nzt+1,
61	! top_heatflux and respective boundary condition bc_pt_t is checked
62	!
63	! RCS Log replace by Id keyword, revision history cleaned up
64	!
65	! Revision 1.61 2006/08/04 14:20:25 raasch
66	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
67	! use_upstream_for_tke, default value for dt_dopts,
68	! generation of file header moved from routines palm and header to here
69	!
70	! Revision 1.1 1997/08/26 06:29:23 raasch
71	! Initial revision
72	!
73	!
74	! Description:
75	! ------------
76	! Check control parameters and deduce further quantities.
77	!------------------------------------------------------------------------------!
78
79	USE arrays_3d
80	USE constants
81	USE control_parameters
82	USE grid_variables
83	USE indices
84	USE model_1d
85	USE netcdf_control
86	USE particle_attributes
87	USE pegrid
88	USE profil_parameter
89	USE statistics
90	USE transpose_indices
91
92	IMPLICIT NONE
93
94	CHARACTER (LEN=1) :: sq
95	CHARACTER (LEN=6) :: var
96	CHARACTER (LEN=7) :: unit
97	CHARACTER (LEN=8) :: date
98	CHARACTER (LEN=10) :: time
99	CHARACTER (LEN=40) :: coupling_string
100	CHARACTER (LEN=100) :: action
101
102	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
103	position, prec
104	LOGICAL :: found, ldum
105	REAL :: gradient, maxn, maxp, remote = 0.0
106
107	!
108	!-- Warning, if host is not set
109	IF ( host(1:1) == ' ' ) THEN
110	IF ( myid == 0 ) THEN
111	PRINT*, '+++ WARNING: check_parameters:'
112	PRINT*, ' "host" is not set. Please check that environment', &
113	' variable "localhost"'
114	PRINT*, ' is set before running PALM'
115	ENDIF
116	ENDIF
117
118	!
119	!-- Check the coupling mode
120	IF ( coupling_mode /= 'uncoupled' .AND. &
121	coupling_mode /= 'atmosphere_to_ocean' .AND. &
122	coupling_mode /= 'ocean_to_atmosphere' ) THEN
123	IF ( myid == 0 ) THEN
124	PRINT*, '+++ check_parameters:'
125	PRINT*, ' illegal coupling mode: ', TRIM( coupling_mode )
126	ENDIF
127	CALL local_stop
128	ENDIF
129
130	!
131	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
132	IF ( coupling_mode /= 'uncoupled' ) THEN
133	IF ( dt_coupling == 9999999.9 ) THEN
134	IF ( myid == 0 ) THEN
135	PRINT*, '+++ check_parameters:'
136	PRINT*, ' dt_coupling is not set but required for coupling ', &
137	'mode: ', TRIM( coupling_mode )
138	ENDIF
139	CALL local_stop
140	ENDIF
141	#if defined( __parallel ) && defined( __mpi2 )
142	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, myid, 11, comm_inter, ierr )
143	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 11, comm_inter, status, ierr )
144	IF ( dt_coupling /= remote ) THEN
145	IF ( myid == 0 ) THEN
146	PRINT*, '+++ check_parameters:'
147	PRINT*, ' TRIM( coupling_mode ): dt_coupling = ', dt_coupling
148	PRINT*, ' is not equal to dt_coupling_remote = ', remote
149	ENDIF
150	CALL local_stop
151	ENDIF
152	IF ( dt_coupling <= 0.0 ) THEN
153	CALL MPI_SEND( dt_max, 1, MPI_REAL, myid, 19, comm_inter, ierr )
154	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 19, comm_inter, status, &
155	ierr )
156	dt_coupling = MAX( dt_max, remote )
157	IF ( myid == 0 ) THEN
158	PRINT*, '+++ check_parameters:'
159	PRINT*, ' TRIM( coupling_mode ): dt_coupling <= 0.0'
160	PRINT*, ' is not allowed and is reset to MAX(dt_max(A,O)) = ', &
161	dt_coupling
162	ENDIF
163	ENDIF
164	CALL MPI_SEND( restart_time, 1, MPI_REAL, myid, 12, comm_inter, ierr )
165	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 12, comm_inter, status, ierr )
166	IF ( restart_time /= remote ) THEN
167	IF ( myid == 0 ) THEN
168	PRINT*, '+++ check_parameters:'
169	PRINT*, ' TRIM( coupling_mode ): restart_time = ', restart_time
170	PRINT*, ' is not equal to restart_time_remote = ', remote
171	ENDIF
172	CALL local_stop
173	ENDIF
174	CALL MPI_SEND( dt_restart, 1, MPI_REAL, myid, 13, comm_inter, ierr )
175	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 13, comm_inter, status, ierr )
176	IF ( dt_restart /= remote ) THEN
177	IF ( myid == 0 ) THEN
178	PRINT*, '+++ check_parameters:'
179	PRINT*, ' TRIM( coupling_mode ): dt_restart = ', dt_restart
180	PRINT*, ' is not equal to dt_restart_remote = ', remote
181	ENDIF
182	CALL local_stop
183	ENDIF
184	CALL MPI_SEND( end_time, 1, MPI_REAL, myid, 14, comm_inter, ierr )
185	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 14, comm_inter, status, ierr )
186	IF ( end_time /= remote ) THEN
187	IF ( myid == 0 ) THEN
188	PRINT*, '+++ check_parameters:'
189	PRINT*, ' TRIM( coupling_mode ): end_time = ', end_time
190	PRINT*, ' is not equal to end_time_remote = ', remote
191	ENDIF
192	CALL local_stop
193	ENDIF
194	CALL MPI_SEND( dx, 1, MPI_REAL, myid, 15, comm_inter, ierr )
195	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 15, comm_inter, status, ierr )
196	IF ( dx /= remote ) THEN
197	IF ( myid == 0 ) THEN
198	PRINT*, '+++ check_parameters:'
199	PRINT*, ' TRIM( coupling_mode ): dx = ', dx
200	PRINT*, ' is not equal to dx_remote = ', remote
201	ENDIF
202	CALL local_stop
203	ENDIF
204	CALL MPI_SEND( dy, 1, MPI_REAL, myid, 16, comm_inter, ierr )
205	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 16, comm_inter, status, ierr )
206	IF ( dy /= remote ) THEN
207	IF ( myid == 0 ) THEN
208	PRINT*, '+++ check_parameters:'
209	PRINT*, ' TRIM( coupling_mode ): dy = ', dy
210	PRINT*, ' is not equal to dy_remote = ', remote
211	ENDIF
212	CALL local_stop
213	ENDIF
214	CALL MPI_SEND( nx, 1, MPI_INTEGER, myid, 17, comm_inter, ierr )
215	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 17, comm_inter, status, &
216	ierr )
217	IF ( nx /= iremote ) THEN
218	IF ( myid == 0 ) THEN
219	PRINT*, '+++ check_parameters:'
220	PRINT*, ' TRIM( coupling_mode ): nx = ', nx
221	PRINT*, ' is not equal to nx_remote = ', iremote
222	ENDIF
223	CALL local_stop
224	ENDIF
225	CALL MPI_SEND( ny, 1, MPI_INTEGER, myid, 18, comm_inter, ierr )
226	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 18, comm_inter, status, &
227	ierr )
228	IF ( ny /= iremote ) THEN
229	IF ( myid == 0 ) THEN
230	PRINT*, '+++ check_parameters:'
231	PRINT*, ' TRIM( coupling_mode ): ny = ', ny
232	PRINT*, ' is not equal to ny_remote = ', iremote
233	ENDIF
234	CALL local_stop
235	ENDIF
236	#endif
237	ENDIF
238
239	#if defined( __parallel ) && defined( __mpi2 )
240	!
241	!-- Exchange via intercommunicator
242	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
243	CALL MPI_SEND( humidity, &
244	1, MPI_LOGICAL, myid, 19, comm_inter, ierr )
245	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
246	CALL MPI_RECV( humidity_remote, &
247	1, MPI_LOGICAL, myid, 19, comm_inter, status, ierr )
248	ENDIF
249	#endif
250
251
252	!
253	!-- Generate the file header which is used as a header for most of PALM's
254	!-- output files
255	CALL DATE_AND_TIME( date, time )
256	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
257	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
258	IF ( coupling_mode == 'uncoupled' ) THEN
259	coupling_string = ''
260	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
261	coupling_string = ' coupled (atmosphere)'
262	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
263	coupling_string = ' coupled (ocean)'
264	ENDIF
265
266	WRITE ( run_description_header, &
267	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
268	TRIM( version ), TRIM( revision ), 'run: ', &
269	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
270	'host: ', TRIM( host ), run_date, run_time
271
272	!
273	!-- Check the general loop optimization method
274	IF ( loop_optimization == 'default' ) THEN
275	IF ( host(1:3) == 'nec' ) THEN
276	loop_optimization = 'vector'
277	ELSE
278	loop_optimization = 'cache'
279	ENDIF
280	ENDIF
281	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
282	.AND. loop_optimization /= 'vector' ) THEN
283	IF ( myid == 0 ) THEN
284	PRINT*, '+++ check_parameters:'
285	PRINT*, ' illegal value given for loop_optimization: ', &
286	TRIM( loop_optimization )
287	ENDIF
288	CALL local_stop
289	ENDIF
290
291	!
292	!-- Check topography setting (check for illegal parameter combinations)
293	IF ( topography /= 'flat' ) THEN
294	action = ' '
295	IF ( scalar_advec /= 'pw-scheme' ) THEN
296	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
297	ENDIF
298	IF ( momentum_advec /= 'pw-scheme' ) THEN
299	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
300	ENDIF
301	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
302	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
303	ENDIF
304	IF ( psolver == 'sor' ) THEN
305	WRITE( action, '(A,A)' ) 'psolver = ', psolver
306	ENDIF
307	IF ( sloping_surface ) THEN
308	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
309	ENDIF
310	IF ( galilei_transformation ) THEN
311	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
312	ENDIF
313	IF ( cloud_physics ) THEN
314	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
315	ENDIF
316	IF ( cloud_droplets ) THEN
317	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
318	ENDIF
319	IF ( humidity ) THEN
320	WRITE( action, '(A)' ) 'humidity = .TRUE.'
321	ENDIF
322	IF ( .NOT. prandtl_layer ) THEN
323	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
324	ENDIF
325	IF ( action /= ' ' ) THEN
326	IF ( myid == 0 ) THEN
327	PRINT*, '+++ check_parameters:'
328	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
329	ENDIF
330	CALL local_stop
331	ENDIF
332	ENDIF
333
334	!
335	!-- Check ocean setting
336	IF ( ocean ) THEN
337	action = ' '
338	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
339	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
340	ENDIF
341	IF ( momentum_advec == 'ups-scheme' ) THEN
342	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
343	ENDIF
344	IF ( action /= ' ' ) THEN
345	IF ( myid == 0 ) THEN
346	PRINT*, '+++ check_parameters:'
347	PRINT*, ' ocean = .T. does not allow ', TRIM( action )
348	ENDIF
349	CALL local_stop
350	ENDIF
351	ENDIF
352
353	!
354	!-- Check whether there are any illegal values
355	!-- Pressure solver:
356	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
357	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
358	IF ( myid == 0 ) THEN
359	PRINT*, '+++ check_parameters:'
360	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
361	psolver
362	ENDIF
363	CALL local_stop
364	ENDIF
365
366	#if defined( __parallel )
367	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
368	IF ( myid == 0 ) THEN
369	PRINT*, '+++ check_parameters:'
370	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
371	'1d domain-decomposition along x'
372	PRINT*, ' please do not set npey/=1 in the parameter file'
373	ENDIF
374	CALL local_stop
375	ENDIF
376	IF ( psolver == 'poisfft_hybrid' .AND. &
377	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
378	psolver == 'multigrid' .AND. &
379	( nxra > nxr .OR. nyna > nyn ) ) THEN
380	IF ( myid == 0 ) THEN
381	PRINT*, '+++ check_parameters:'
382	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
383	'subdomains with unequal size'
384	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
385	' file'
386	ENDIF
387	CALL local_stop
388	ENDIF
389	#else
390	IF ( psolver == 'poisfft_hybrid' ) THEN
391	IF ( myid == 0 ) THEN
392	PRINT*, '+++ check_parameters:'
393	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
394	'parallel environment'
395	ENDIF
396	CALL local_stop
397	ENDIF
398	#endif
399
400	IF ( psolver == 'multigrid' ) THEN
401	IF ( cycle_mg == 'w' ) THEN
402	gamma_mg = 2
403	ELSEIF ( cycle_mg == 'v' ) THEN
404	gamma_mg = 1
405	ELSE
406	IF ( myid == 0 ) THEN
407	PRINT*, '+++ check_parameters:'
408	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
409	ENDIF
410	CALL local_stop
411	ENDIF
412	ENDIF
413
414	IF ( fft_method /= 'singleton-algorithm' .AND. &
415	fft_method /= 'temperton-algorithm' .AND. &
416	fft_method /= 'system-specific' ) THEN
417	IF ( myid == 0 ) THEN
418	PRINT*, '+++ check_parameters:'
419	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
420	ENDIF
421	CALL local_stop
422	ENDIF
423
424	!
425	!-- Advection schemes:
426	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
427	THEN
428	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
429	'scheme: momentum_advec=', momentum_advec
430	CALL local_stop
431	ENDIF
432	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
433	.AND. timestep_scheme /= 'euler' ) THEN
434	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
435	momentum_advec, ' is not allowed with ', &
436	'timestep_scheme=', timestep_scheme
437	CALL local_stop
438	ENDIF
439
440	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
441	scalar_advec /= 'ups-scheme' ) THEN
442	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
443	'scheme: scalar_advec=', scalar_advec
444	CALL local_stop
445	ENDIF
446
447	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
448	use_upstream_for_tke = .TRUE.
449	IF ( myid == 0 ) THEN
450	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
451	'.TRUE. because use_sgs_for_particles = .TRUE.'
452	ENDIF
453	ENDIF
454
455	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
456	IF ( myid == 0 ) THEN
457	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
458	'not allowed with timestep_scheme=', timestep_scheme
459	ENDIF
460	CALL local_stop
461	ENDIF
462
463	!
464	!-- Timestep schemes:
465	SELECT CASE ( TRIM( timestep_scheme ) )
466
467	CASE ( 'euler' )
468	intermediate_timestep_count_max = 1
469	asselin_filter_factor = 0.0
470
471	CASE ( 'leapfrog', 'leapfrog+euler' )
472	intermediate_timestep_count_max = 1
473
474	CASE ( 'runge-kutta-2' )
475	intermediate_timestep_count_max = 2
476	asselin_filter_factor = 0.0
477
478	CASE ( 'runge-kutta-3' )
479	intermediate_timestep_count_max = 3
480	asselin_filter_factor = 0.0
481
482	CASE DEFAULT
483	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
484	'scheme: timestep_scheme=', timestep_scheme
485	CALL local_stop
486
487	END SELECT
488
489	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
490	THEN
491	IF ( myid == 0 ) THEN
492	PRINT*, '+++ check_parameters: scalar advection scheme "', &
493	TRIM( scalar_advec ), '"'
494	PRINT*, ' does not work with timestep_scheme "', &
495	TRIM( timestep_scheme ), '"'
496	ENDIF
497	CALL local_stop
498	ENDIF
499
500	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
501	THEN
502	IF ( myid == 0 ) THEN
503	PRINT*, '+++ check_parameters: momentum advection scheme "', &
504	TRIM( momentum_advec ), '"'
505	PRINT*, ' does not work with timestep_scheme "', &
506	TRIM( timestep_scheme ), '"'
507	ENDIF
508	CALL local_stop
509	ENDIF
510
511
512	IF ( initializing_actions == ' ' ) THEN
513	IF ( myid == 0 ) THEN
514	PRINT*, '+++ check parameters:'
515	PRINT*, ' no value found for initializing_actions'
516	ENDIF
517	CALL local_stop
518	ENDIF
519
520	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
521	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
522	!
523	!-- No model continuation run; several initialising actions are possible
524	action = initializing_actions
525	DO WHILE ( TRIM( action ) /= '' )
526	position = INDEX( action, ' ' )
527	SELECT CASE ( action(1:position-1) )
528
529	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
530	'by_user', 'initialize_vortex', 'initialize_ptanom' )
531	action = action(position+1:)
532
533	CASE DEFAULT
534	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
535	'ng_action unkown or not allowed: action = "', &
536	TRIM(action), '"'
537	CALL local_stop
538
539	END SELECT
540	ENDDO
541	ENDIF
542	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
543	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
544	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
545	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
546	' allowed simultaneously'
547	CALL local_stop
548	ENDIF
549	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
550	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
551	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
552	'"set_constant_profiles" and "by_user" are not', &
553	' allowed simultaneously'
554	CALL local_stop
555	ENDIF
556	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
557	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
558	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
559	'"by_user" and "set_1d-model_profiles" are not', &
560	' allowed simultaneously'
561	CALL local_stop
562	ENDIF
563
564	IF ( cloud_physics .AND. .NOT. humidity ) THEN
565	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
566	cloud_physics, ' is not allowed with ', &
567	'humidity =', humidity
568	CALL local_stop
569	ENDIF
570
571	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
572	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
573	precipitation, ' is not allowed with ', &
574	'cloud_physics =', cloud_physics
575	CALL local_stop
576	ENDIF
577
578	IF ( humidity .AND. sloping_surface ) THEN
579	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE', &
580	'and hang = TRUE are not', &
581	' allowed simultaneously'
582	CALL local_stop
583	ENDIF
584
585	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
586	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
587	'is not implemented for humidity'
588	CALL local_stop
589	ENDIF
590
591	IF ( passive_scalar .AND. humidity ) THEN
592	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE and', &
593	'passive_scalar = TRUE is not allowed ', &
594	'simultaneously'
595	CALL local_stop
596	ENDIF
597
598	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
599	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
600	'is not implemented for passive_scalar'
601	CALL local_stop
602	ENDIF
603
604	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
605	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
606	TRIM( grid_matching ), &
607	'" found for parameter grid_matching'
608	CALL local_stop
609	ENDIF
610
611	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
612	IF ( myid == 0 ) PRINT*, '+++ check_parameters: plant_canopy = TRUE', &
613	'requires a non-zero drag_coefficient'
614	CALL local_stop
615	ENDIF
616
617	!
618	!-- In case of no model continuation run, check initialising parameters and
619	!-- deduce further quantities
620	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
621
622	!
623	!-- Initial profiles for 1D and 3D model, respectively
624	u_init = ug_surface
625	v_init = vg_surface
626	pt_init = pt_surface
627	IF ( humidity ) q_init = q_surface
628	IF ( ocean ) sa_init = sa_surface
629	IF ( passive_scalar ) q_init = s_surface
630	IF ( plant_canopy ) lad = 0.0
631
632	!
633	!--
634	!-- If required, compute initial profile of the geostrophic wind
635	!-- (component ug)
636	i = 1
637	gradient = 0.0
638
639	IF ( .NOT. ocean ) THEN
640
641	ug_vertical_gradient_level_ind(1) = 0
642	ug(0) = ug_surface
643	DO k = 1, nzt+1
644	IF ( i < 11 ) THEN
645	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
646	ug_vertical_gradient_level(i) >= 0.0 ) THEN
647	gradient = ug_vertical_gradient(i) / 100.0
648	ug_vertical_gradient_level_ind(i) = k - 1
649	i = i + 1
650	ENDIF
651	ENDIF
652	IF ( gradient /= 0.0 ) THEN
653	IF ( k /= 1 ) THEN
654	ug(k) = ug(k-1) + dzu(k) * gradient
655	ELSE
656	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
657	ENDIF
658	ELSE
659	ug(k) = ug(k-1)
660	ENDIF
661	ENDDO
662
663	ELSE
664
665	ug_vertical_gradient_level_ind(1) = nzt+1
666	ug(nzt+1) = ug_surface
667	DO k = nzt, 0, -1
668	IF ( i < 11 ) THEN
669	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
670	ug_vertical_gradient_level(i) <= 0.0 ) THEN
671	gradient = ug_vertical_gradient(i) / 100.0
672	ug_vertical_gradient_level_ind(i) = k + 1
673	i = i + 1
674	ENDIF
675	ENDIF
676	IF ( gradient /= 0.0 ) THEN
677	IF ( k /= nzt ) THEN
678	ug(k) = ug(k+1) - dzu(k+1) * gradient
679	ELSE
680	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
681	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
682	ENDIF
683	ELSE
684	ug(k) = ug(k+1)
685	ENDIF
686	ENDDO
687
688	ENDIF
689
690	u_init = ug
691
692	!
693	!-- In case of no given gradients for ug, choose a vanishing gradient
694	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
695	ug_vertical_gradient_level(1) = 0.0
696	ENDIF
697
698	!
699	!--
700	!-- If required, compute initial profile of the geostrophic wind
701	!-- (component vg)
702	i = 1
703	gradient = 0.0
704
705	IF ( .NOT. ocean ) THEN
706
707	vg_vertical_gradient_level_ind(1) = 0
708	vg(0) = vg_surface
709	DO k = 1, nzt+1
710	IF ( i < 11 ) THEN
711	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
712	vg_vertical_gradient_level(i) >= 0.0 ) THEN
713	gradient = vg_vertical_gradient(i) / 100.0
714	vg_vertical_gradient_level_ind(i) = k - 1
715	i = i + 1
716	ENDIF
717	ENDIF
718	IF ( gradient /= 0.0 ) THEN
719	IF ( k /= 1 ) THEN
720	vg(k) = vg(k-1) + dzu(k) * gradient
721	ELSE
722	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
723	ENDIF
724	ELSE
725	vg(k) = vg(k-1)
726	ENDIF
727	ENDDO
728
729	ELSE
730
731	vg_vertical_gradient_level_ind(1) = nzt+1
732	vg(nzt+1) = vg_surface
733	DO k = nzt, 0, -1
734	IF ( i < 11 ) THEN
735	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
736	vg_vertical_gradient_level(i) <= 0.0 ) THEN
737	gradient = vg_vertical_gradient(i) / 100.0
738	vg_vertical_gradient_level_ind(i) = k + 1
739	i = i + 1
740	ENDIF
741	ENDIF
742	IF ( gradient /= 0.0 ) THEN
743	IF ( k /= nzt ) THEN
744	vg(k) = vg(k+1) - dzu(k+1) * gradient
745	ELSE
746	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
747	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
748	ENDIF
749	ELSE
750	vg(k) = vg(k+1)
751	ENDIF
752	ENDDO
753
754	ENDIF
755
756	v_init = vg
757
758	!
759	!-- In case of no given gradients for vg, choose a vanishing gradient
760	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
761	vg_vertical_gradient_level(1) = 0.0
762	ENDIF
763
764	!
765	!-- Compute initial temperature profile using the given temperature gradients
766	i = 1
767	gradient = 0.0
768
769	IF ( .NOT. ocean ) THEN
770
771	pt_vertical_gradient_level_ind(1) = 0
772	DO k = 1, nzt+1
773	IF ( i < 11 ) THEN
774	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
775	pt_vertical_gradient_level(i) >= 0.0 ) THEN
776	gradient = pt_vertical_gradient(i) / 100.0
777	pt_vertical_gradient_level_ind(i) = k - 1
778	i = i + 1
779	ENDIF
780	ENDIF
781	IF ( gradient /= 0.0 ) THEN
782	IF ( k /= 1 ) THEN
783	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
784	ELSE
785	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
786	ENDIF
787	ELSE
788	pt_init(k) = pt_init(k-1)
789	ENDIF
790	ENDDO
791
792	ELSE
793
794	pt_vertical_gradient_level_ind(1) = nzt+1
795	DO k = nzt, 0, -1
796	IF ( i < 11 ) THEN
797	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
798	pt_vertical_gradient_level(i) <= 0.0 ) THEN
799	gradient = pt_vertical_gradient(i) / 100.0
800	pt_vertical_gradient_level_ind(i) = k + 1
801	i = i + 1
802	ENDIF
803	ENDIF
804	IF ( gradient /= 0.0 ) THEN
805	IF ( k /= nzt ) THEN
806	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
807	ELSE
808	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
809	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
810	ENDIF
811	ELSE
812	pt_init(k) = pt_init(k+1)
813	ENDIF
814	ENDDO
815
816	ENDIF
817
818	!
819	!-- In case of no given temperature gradients, choose gradient of neutral
820	!-- stratification
821	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
822	pt_vertical_gradient_level(1) = 0.0
823	ENDIF
824
825	!
826	!-- Store temperature gradient at the top boundary for possible Neumann
827	!-- boundary condition
828	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
829
830	!
831	!-- If required, compute initial humidity or scalar profile using the given
832	!-- humidity/scalar gradient. In case of scalar transport, initially store
833	!-- values of the scalar parameters on humidity parameters
834	IF ( passive_scalar ) THEN
835	bc_q_b = bc_s_b
836	bc_q_t = bc_s_t
837	q_surface = s_surface
838	q_surface_initial_change = s_surface_initial_change
839	q_vertical_gradient = s_vertical_gradient
840	q_vertical_gradient_level = s_vertical_gradient_level
841	surface_waterflux = surface_scalarflux
842	ENDIF
843
844	IF ( humidity .OR. passive_scalar ) THEN
845
846	i = 1
847	gradient = 0.0
848	q_vertical_gradient_level_ind(1) = 0
849	DO k = 1, nzt+1
850	IF ( i < 11 ) THEN
851	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
852	q_vertical_gradient_level(i) >= 0.0 ) THEN
853	gradient = q_vertical_gradient(i) / 100.0
854	q_vertical_gradient_level_ind(i) = k - 1
855	i = i + 1
856	ENDIF
857	ENDIF
858	IF ( gradient /= 0.0 ) THEN
859	IF ( k /= 1 ) THEN
860	q_init(k) = q_init(k-1) + dzu(k) * gradient
861	ELSE
862	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
863	ENDIF
864	ELSE
865	q_init(k) = q_init(k-1)
866	ENDIF
867	!
868	!-- Avoid negative humidities
869	IF ( q_init(k) < 0.0 ) THEN
870	q_init(k) = 0.0
871	ENDIF
872	ENDDO
873
874	!
875	!-- In case of no given humidity gradients, choose zero gradient
876	!-- conditions
877	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
878	q_vertical_gradient_level(1) = 0.0
879	ENDIF
880
881	!
882	!-- Store humidity gradient at the top boundary for possile Neumann
883	!-- boundary condition
884	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
885
886	ENDIF
887
888	!
889	!-- If required, compute initial salinity profile using the given salinity
890	!-- gradients
891	IF ( ocean ) THEN
892
893	i = 1
894	gradient = 0.0
895
896	sa_vertical_gradient_level_ind(1) = nzt+1
897	DO k = nzt, 0, -1
898	IF ( i < 11 ) THEN
899	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
900	sa_vertical_gradient_level(i) <= 0.0 ) THEN
901	gradient = sa_vertical_gradient(i) / 100.0
902	sa_vertical_gradient_level_ind(i) = k + 1
903	i = i + 1
904	ENDIF
905	ENDIF
906	IF ( gradient /= 0.0 ) THEN
907	IF ( k /= nzt ) THEN
908	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
909	ELSE
910	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
911	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
912	ENDIF
913	ELSE
914	sa_init(k) = sa_init(k+1)
915	ENDIF
916	ENDDO
917
918	ENDIF
919
920	!
921	!-- If required compute the profile of leaf area density used in the plant canopy model
922	IF ( plant_canopy ) THEN
923
924	i = 1
925	gradient = 0.0
926
927	IF ( .NOT. ocean ) THEN
928
929	lad(0) = lad_surface
930
931	lad_vertical_gradient_level_ind(1) = 0
932	DO k = 1, pch_index
933	IF ( i < 11 ) THEN
934	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
935	lad_vertical_gradient_level(i) >= 0.0 ) THEN
936	gradient = lad_vertical_gradient(i)
937	lad_vertical_gradient_level_ind(i) = k - 1
938	i = i + 1
939	ENDIF
940	ENDIF
941	IF ( gradient /= 0.0 ) THEN
942	IF ( k /= 1 ) THEN
943	lad(k) = lad(k-1) + dzu(k) * gradient
944	ELSE
945	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
946	ENDIF
947	ELSE
948	lad(k) = lad(k-1)
949	ENDIF
950	ENDDO
951
952	ENDIF
953
954	!
955	!-- In case of no given leaf area density gradients, choose a vanishing gradient
956	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
957	lad_vertical_gradient_level(1) = 0.0
958	ENDIF
959
960	ENDIF
961
962	ENDIF
963
964	!
965	!-- Compute Coriolis parameter
966	f = 2.0 * omega * SIN( phi / 180.0 * pi )
967	fs = 2.0 * omega * COS( phi / 180.0 * pi )
968
969	!
970	!-- Ocean runs always use reference values in the buoyancy term. Therefore
971	!-- set the reference temperature equal to the surface temperature.
972	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
973
974	!
975	!-- Reference value has to be used in buoyancy terms
976	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
977
978	!
979	!-- Sign of buoyancy/stability terms
980	IF ( ocean ) atmos_ocean_sign = -1.0
981
982	!
983	!-- Ocean version must use flux boundary conditions at the top
984	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
985	IF ( myid == 0 ) PRINT*, '+++ check_parameters: use_top_fluxes ',&
986	'must be .TRUE. in ocean version'
987	CALL local_stop
988	ENDIF
989
990	!
991	!-- In case of a given slope, compute the relevant quantities
992	IF ( alpha_surface /= 0.0 ) THEN
993	IF ( ABS( alpha_surface ) > 90.0 ) THEN
994	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
995	'=', alpha_surface, ' ) must be < 90.0'
996	CALL local_stop
997	ENDIF
998	sloping_surface = .TRUE.
999	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1000	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1001	ENDIF
1002
1003	!
1004	!-- Check time step and cfl_factor
1005	IF ( dt /= -1.0 ) THEN
1006	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1007	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
1008	CALL local_stop
1009	ENDIF
1010	dt_3d = dt
1011	dt_fixed = .TRUE.
1012	ENDIF
1013
1014	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1015	IF ( cfl_factor == -1.0 ) THEN
1016	IF ( momentum_advec == 'ups-scheme' .OR. &
1017	scalar_advec == 'ups-scheme' ) THEN
1018	cfl_factor = 0.8
1019	ELSE
1020	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1021	cfl_factor = 0.8
1022	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1023	cfl_factor = 0.9
1024	ELSE
1025	cfl_factor = 0.1
1026	ENDIF
1027	ENDIF
1028	ELSE
1029	IF ( myid == 0 ) THEN
1030	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
1031	' out of range'
1032	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
1033	ENDIF
1034	CALL local_stop
1035	ENDIF
1036	ENDIF
1037
1038	!
1039	!-- Store simulated time at begin
1040	simulated_time_at_begin = simulated_time
1041
1042	!
1043	!-- Set wind speed in the Galilei-transformed system
1044	IF ( galilei_transformation ) THEN
1045	IF ( use_ug_for_galilei_tr .AND. &
1046	ug_vertical_gradient_level(1) == 0.0 .AND. &
1047	vg_vertical_gradient_level(1) == 0.0 ) THEN
1048	u_gtrans = ug_surface
1049	v_gtrans = vg_surface
1050	ELSEIF ( use_ug_for_galilei_tr .AND. &
1051	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1052	IF ( myid == 0 ) THEN
1053	PRINT*, '+++ check_parameters:'
1054	PRINT*, ' baroclinicity (ug) not allowed'
1055	PRINT*, ' simultaneously with galilei transformation'
1056	ENDIF
1057	CALL local_stop
1058	ELSEIF ( use_ug_for_galilei_tr .AND. &
1059	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1060	IF ( myid == 0 ) THEN
1061	PRINT*, '+++ check_parameters:'
1062	PRINT*, ' baroclinicity (vg) not allowed'
1063	PRINT*, ' simultaneously with galilei transformation'
1064	ENDIF
1065	CALL local_stop
1066	ELSE
1067	IF ( myid == 0 ) THEN
1068	PRINT*, '+++ WARNING: check_parameters:'
1069	PRINT*, ' variable translation speed used for galilei-tran' // &
1070	'sformation, which'
1071	PRINT*, ' may cause instabilities in stably stratified regions'
1072	ENDIF
1073	ENDIF
1074	ENDIF
1075
1076	!
1077	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1078	!-- fluxes have to be used in the diffusion-terms
1079	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1080
1081	!
1082	!-- Check boundary conditions and set internal variables:
1083	!-- Lateral boundary conditions
1084	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1085	bc_lr /= 'radiation/dirichlet' ) THEN
1086	IF ( myid == 0 ) THEN
1087	PRINT*, '+++ check_parameters:'
1088	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
1089	ENDIF
1090	CALL local_stop
1091	ENDIF
1092	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1093	bc_ns /= 'radiation/dirichlet' ) THEN
1094	IF ( myid == 0 ) THEN
1095	PRINT*, '+++ check_parameters:'
1096	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
1097	ENDIF
1098	CALL local_stop
1099	ENDIF
1100
1101	!
1102	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1103	!-- Willimas advection scheme. Several schemes and tools do not work with
1104	!-- non-cyclic boundary conditions.
1105	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1106	IF ( psolver /= 'multigrid' ) THEN
1107	IF ( myid == 0 ) THEN
1108	PRINT*, '+++ check_parameters:'
1109	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1110	' psolver = ', psolver
1111	ENDIF
1112	CALL local_stop
1113	ENDIF
1114	IF ( momentum_advec /= 'pw-scheme' ) THEN
1115	IF ( myid == 0 ) THEN
1116	PRINT*, '+++ check_parameters:'
1117	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1118	' momentum_advec = ', momentum_advec
1119	ENDIF
1120	CALL local_stop
1121	ENDIF
1122	IF ( scalar_advec /= 'pw-scheme' ) THEN
1123	IF ( myid == 0 ) THEN
1124	PRINT*, '+++ check_parameters:'
1125	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1126	' scalar_advec = ', scalar_advec
1127	ENDIF
1128	CALL local_stop
1129	ENDIF
1130	IF ( galilei_transformation ) THEN
1131	IF ( myid == 0 ) THEN
1132	PRINT*, '+++ check_parameters:'
1133	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1134	' galilei_transformation = .T.'
1135	ENDIF
1136	CALL local_stop
1137	ENDIF
1138	! IF ( conserve_volume_flow ) THEN
1139	! IF ( myid == 0 ) THEN
1140	! PRINT*, '+++ check_parameters:'
1141	! PRINT*, ' non-cyclic lateral boundaries do not allow', &
1142	! ' conserve_volume_flow = .T.'
1143	! ENDIF
1144	! CALL local_stop
1145	! ENDIF
1146	ENDIF
1147
1148	!
1149	!-- Bottom boundary condition for the turbulent Kinetic energy
1150	IF ( bc_e_b == 'neumann' ) THEN
1151	ibc_e_b = 1
1152	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1153	IF ( myid == 0 ) THEN
1154	PRINT*, '+++ WARNING: check_parameters:'
1155	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
1156	ENDIF
1157	ENDIF
1158	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1159	ibc_e_b = 2
1160	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1161	IF ( myid == 0 ) THEN
1162	PRINT*, '+++ WARNING: check_parameters:'
1163	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
1164	ENDIF
1165	ENDIF
1166	IF ( .NOT. prandtl_layer ) THEN
1167	bc_e_b = 'neumann'
1168	ibc_e_b = 1
1169	IF ( myid == 0 ) THEN
1170	PRINT*, '+++ WARNING: check_parameters:'
1171	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
1172	ENDIF
1173	ENDIF
1174	ELSE
1175	IF ( myid == 0 ) THEN
1176	PRINT*, '+++ check_parameters:'
1177	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
1178	ENDIF
1179	CALL local_stop
1180	ENDIF
1181
1182	!
1183	!-- Boundary conditions for perturbation pressure
1184	IF ( bc_p_b == 'dirichlet' ) THEN
1185	ibc_p_b = 0
1186	ELSEIF ( bc_p_b == 'neumann' ) THEN
1187	ibc_p_b = 1
1188	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1189	ibc_p_b = 2
1190	ELSE
1191	IF ( myid == 0 ) THEN
1192	PRINT*, '+++ check_parameters:'
1193	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
1194	ENDIF
1195	CALL local_stop
1196	ENDIF
1197	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1198	IF ( myid == 0 ) THEN
1199	PRINT*, '+++ check_parameters:'
1200	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
1201	' not allowed with'
1202	PRINT*, ' prandtl_layer = .FALSE.'
1203	ENDIF
1204	CALL local_stop
1205	ENDIF
1206	IF ( bc_p_t == 'dirichlet' ) THEN
1207	ibc_p_t = 0
1208	ELSEIF ( bc_p_t == 'neumann' ) THEN
1209	ibc_p_t = 1
1210	ELSE
1211	IF ( myid == 0 ) THEN
1212	PRINT*, '+++ check_parameters:'
1213	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
1214	ENDIF
1215	CALL local_stop
1216	ENDIF
1217
1218	!
1219	!-- Boundary conditions for potential temperature
1220	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1221	ibc_pt_b = 2
1222	ELSE
1223	IF ( bc_pt_b == 'dirichlet' ) THEN
1224	ibc_pt_b = 0
1225	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1226	ibc_pt_b = 1
1227	ELSE
1228	IF ( myid == 0 ) THEN
1229	PRINT*, '+++ check_parameters:'
1230	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
1231	ENDIF
1232	CALL local_stop
1233	ENDIF
1234	ENDIF
1235
1236	IF ( bc_pt_t == 'dirichlet' ) THEN
1237	ibc_pt_t = 0
1238	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1239	ibc_pt_t = 1
1240	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1241	ibc_pt_t = 2
1242	ELSE
1243	IF ( myid == 0 ) THEN
1244	PRINT*, '+++ check_parameters:'
1245	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
1246	ENDIF
1247	CALL local_stop
1248	ENDIF
1249
1250	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1251	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1252	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1253	top_momentumflux_v /= 9999999.9 ) THEN
1254	constant_top_momentumflux = .TRUE.
1255	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1256	top_momentumflux_v == 9999999.9 ) ) THEN
1257	IF ( myid == 0 ) THEN
1258	PRINT*, '+++ check_parameters:'
1259	PRINT*, ' both, top_momentumflux_u AND top_momentumflux_v'
1260	PRINT*, ' must be set'
1261	ENDIF
1262	CALL local_stop
1263	ENDIF
1264
1265	!
1266	!-- A given surface temperature implies Dirichlet boundary condition for
1267	!-- temperature. In this case specification of a constant heat flux is
1268	!-- forbidden.
1269	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1270	surface_heatflux /= 0.0 ) THEN
1271	IF ( myid == 0 ) THEN
1272	PRINT*, '+++ check_parameters:'
1273	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
1274	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
1275	ENDIF
1276	CALL local_stop
1277	ENDIF
1278	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1279	IF ( myid == 0 ) THEN
1280	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
1281	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
1282	pt_surface_initial_change
1283	ENDIF
1284	CALL local_stop
1285	ENDIF
1286
1287	!
1288	!-- A given temperature at the top implies Dirichlet boundary condition for
1289	!-- temperature. In this case specification of a constant heat flux is
1290	!-- forbidden.
1291	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1292	top_heatflux /= 0.0 ) THEN
1293	IF ( myid == 0 ) THEN
1294	PRINT*, '+++ check_parameters:'
1295	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
1296	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
1297	ENDIF
1298	CALL local_stop
1299	ENDIF
1300
1301	!
1302	!-- Boundary conditions for salinity
1303	IF ( ocean ) THEN
1304	IF ( bc_sa_t == 'dirichlet' ) THEN
1305	ibc_sa_t = 0
1306	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1307	ibc_sa_t = 1
1308	ELSE
1309	IF ( myid == 0 ) THEN
1310	PRINT*, '+++ check_parameters:'
1311	PRINT*, ' unknown boundary condition: bc_sa_t = ', bc_sa_t
1312	ENDIF
1313	CALL local_stop
1314	ENDIF
1315
1316	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1317	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1318	IF ( myid == 0 ) THEN
1319	PRINT*, '+++ check_parameters:'
1320	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1321	PRINT*, ' requires to set top_salinityflux '
1322	ENDIF
1323	CALL local_stop
1324	ENDIF
1325
1326	!
1327	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1328	!-- salinity. In this case specification of a constant salinity flux is
1329	!-- forbidden.
1330	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1331	top_salinityflux /= 0.0 ) THEN
1332	IF ( myid == 0 ) THEN
1333	PRINT*, '+++ check_parameters:'
1334	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1335	PRINT*, ' is not allowed with constant_top_salinityflux = ', &
1336	'.TRUE.'
1337	ENDIF
1338	CALL local_stop
1339	ENDIF
1340
1341	ENDIF
1342
1343	!
1344	!-- In case of humidity or passive scalar, set boundary conditions for total
1345	!-- water content / scalar
1346	IF ( humidity .OR. passive_scalar ) THEN
1347	IF ( humidity ) THEN
1348	sq = 'q'
1349	ELSE
1350	sq = 's'
1351	ENDIF
1352	IF ( bc_q_b == 'dirichlet' ) THEN
1353	ibc_q_b = 0
1354	ELSEIF ( bc_q_b == 'neumann' ) THEN
1355	ibc_q_b = 1
1356	ELSE
1357	IF ( myid == 0 ) THEN
1358	PRINT*, '+++ check_parameters:'
1359	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
1360	ENDIF
1361	CALL local_stop
1362	ENDIF
1363	IF ( bc_q_t == 'dirichlet' ) THEN
1364	ibc_q_t = 0
1365	ELSEIF ( bc_q_t == 'neumann' ) THEN
1366	ibc_q_t = 1
1367	ELSE
1368	IF ( myid == 0 ) THEN
1369	PRINT*, '+++ check_parameters:'
1370	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
1371	ENDIF
1372	CALL local_stop
1373	ENDIF
1374
1375	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1376
1377	!
1378	!-- A given surface humidity implies Dirichlet boundary condition for
1379	!-- humidity. In this case specification of a constant water flux is
1380	!-- forbidden.
1381	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1382	IF ( myid == 0 ) THEN
1383	PRINT*, '+++ check_parameters:'
1384	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
1385	PRINT*, ' is not allowed with prescribed surface flux'
1386	ENDIF
1387	CALL local_stop
1388	ENDIF
1389	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1390	IF ( myid == 0 ) THEN
1391	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
1392	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
1393	' = ', q_surface_initial_change
1394	ENDIF
1395	CALL local_stop
1396	ENDIF
1397
1398	ENDIF
1399
1400	!
1401	!-- Boundary conditions for horizontal components of wind speed
1402	IF ( bc_uv_b == 'dirichlet' ) THEN
1403	ibc_uv_b = 0
1404	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1405	ibc_uv_b = 1
1406	IF ( prandtl_layer ) THEN
1407	IF ( myid == 0 ) THEN
1408	PRINT*, '+++ check_parameters:'
1409	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
1410	' is not allowed with'
1411	PRINT*, ' prandtl_layer = .TRUE.'
1412	ENDIF
1413	CALL local_stop
1414	ENDIF
1415	ELSE
1416	IF ( myid == 0 ) THEN
1417	PRINT*, '+++ check_parameters:'
1418	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
1419	ENDIF
1420	CALL local_stop
1421	ENDIF
1422	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1423	bc_uv_t = 'neumann'
1424	ibc_uv_t = 1
1425	ELSE
1426	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1427	ibc_uv_t = 0
1428	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1429	ibc_uv_t = 1
1430	ELSE
1431	IF ( myid == 0 ) THEN
1432	PRINT*, '+++ check_parameters:'
1433	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
1434	ENDIF
1435	CALL local_stop
1436	ENDIF
1437	ENDIF
1438
1439	!
1440	!-- Compute and check, respectively, the Rayleigh Damping parameter
1441	IF ( rayleigh_damping_factor == -1.0 ) THEN
1442	IF ( momentum_advec == 'ups-scheme' ) THEN
1443	rayleigh_damping_factor = 0.01
1444	ELSE
1445	rayleigh_damping_factor = 0.0
1446	ENDIF
1447	ELSE
1448	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1449	THEN
1450	IF ( myid == 0 ) THEN
1451	PRINT*, '+++ check_parameters:'
1452	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
1453	' out of range [0.0,1.0]'
1454	ENDIF
1455	CALL local_stop
1456	ENDIF
1457	ENDIF
1458
1459	IF ( rayleigh_damping_height == -1.0 ) THEN
1460	IF ( .NOT. ocean ) THEN
1461	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1462	ELSE
1463	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1464	ENDIF
1465	ELSE
1466	IF ( .NOT. ocean ) THEN
1467	IF ( rayleigh_damping_height < 0.0 .OR. &
1468	rayleigh_damping_height > zu(nzt) ) THEN
1469	IF ( myid == 0 ) THEN
1470	PRINT*, '+++ check_parameters:'
1471	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1472	' out of range [0.0,', zu(nzt), ']'
1473	ENDIF
1474	CALL local_stop
1475	ENDIF
1476	ELSE
1477	IF ( rayleigh_damping_height > 0.0 .OR. &
1478	rayleigh_damping_height < zu(nzb) ) THEN
1479	IF ( myid == 0 ) THEN
1480	PRINT*, '+++ check_parameters:'
1481	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1482	' out of range [0.0,', zu(nzb), ']'
1483	ENDIF
1484	CALL local_stop
1485	ENDIF
1486	ENDIF
1487	ENDIF
1488
1489	!
1490	!-- Check limiters for Upstream-Spline scheme
1491	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1492	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1493	overshoot_limit_e < 0.0 ) THEN
1494	IF ( myid == 0 ) THEN
1495	PRINT*, '+++ check_parameters:'
1496	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
1497	ENDIF
1498	CALL local_stop
1499	ENDIF
1500	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1501	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1502	IF ( myid == 0 ) THEN
1503	PRINT*, '+++ check_parameters:'
1504	PRINT*, ' ups_limit_... < 0.0 is not allowed'
1505	ENDIF
1506	CALL local_stop
1507	ENDIF
1508
1509	!
1510	!-- Check number of chosen statistic regions. More than 10 regions are not
1511	!-- allowed, because so far no more than 10 corresponding output files can
1512	!-- be opened (cf. check_open)
1513	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1514	IF ( myid == 0 ) THEN
1515	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
1516	statistic_regions+1
1517	PRINT*, ' Only 10 regions are allowed'
1518	ENDIF
1519	CALL local_stop
1520	ENDIF
1521	IF ( normalizing_region > statistic_regions .OR. &
1522	normalizing_region < 0) THEN
1523	IF ( myid == 0 ) THEN
1524	PRINT*, '+++ check_parameters: normalizing_region = ', &
1525	normalizing_region, ' is unknown'
1526	PRINT*, ' Must be <= ', statistic_regions
1527	ENDIF
1528	CALL local_stop
1529	ENDIF
1530
1531	!
1532	!-- Check the interval for sorting particles.
1533	!-- Using particles as cloud droplets requires sorting after each timestep.
1534	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1535	dt_sort_particles = 0.0
1536	IF ( myid == 0 ) THEN
1537	PRINT*, '+++ WARNING: check_parameters:'
1538	PRINT*, ' dt_sort_particles is reset to 0.0 because ', &
1539	'of cloud_droplets = .TRUE.'
1540	ENDIF
1541	ENDIF
1542
1543	!
1544	!-- Set the default intervals for data output, if necessary
1545	!-- NOTE: dt_dosp has already been set in package_parin
1546	IF ( dt_data_output /= 9999999.9 ) THEN
1547	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1548	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1549	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1550	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1551	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1552	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1553	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1554	ENDIF
1555
1556	!
1557	!-- Set the default skip time intervals for data output, if necessary
1558	IF ( skip_time_dopr == 9999999.9 ) &
1559	skip_time_dopr = skip_time_data_output
1560	IF ( skip_time_dosp == 9999999.9 ) &
1561	skip_time_dosp = skip_time_data_output
1562	IF ( skip_time_do2d_xy == 9999999.9 ) &
1563	skip_time_do2d_xy = skip_time_data_output
1564	IF ( skip_time_do2d_xz == 9999999.9 ) &
1565	skip_time_do2d_xz = skip_time_data_output
1566	IF ( skip_time_do2d_yz == 9999999.9 ) &
1567	skip_time_do2d_yz = skip_time_data_output
1568	IF ( skip_time_do3d == 9999999.9 ) &
1569	skip_time_do3d = skip_time_data_output
1570	IF ( skip_time_data_output_av == 9999999.9 ) &
1571	skip_time_data_output_av = skip_time_data_output
1572
1573	!
1574	!-- Check the average intervals (first for 3d-data, then for profiles and
1575	!-- spectra)
1576	IF ( averaging_interval > dt_data_output_av ) THEN
1577	IF ( myid == 0 ) THEN
1578	PRINT*, '+++ check_parameters: average_interval=', &
1579	averaging_interval, ' must be <= dt_data_output=', &
1580	dt_data_output
1581	ENDIF
1582	CALL local_stop
1583	ENDIF
1584
1585	IF ( averaging_interval_pr == 9999999.9 ) THEN
1586	averaging_interval_pr = averaging_interval
1587	ENDIF
1588
1589	IF ( averaging_interval_pr > dt_dopr ) THEN
1590	IF ( myid == 0 ) THEN
1591	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1592	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1593	ENDIF
1594	CALL local_stop
1595	ENDIF
1596
1597	IF ( averaging_interval_sp == 9999999.9 ) THEN
1598	averaging_interval_sp = averaging_interval
1599	ENDIF
1600
1601	IF ( averaging_interval_sp > dt_dosp ) THEN
1602	IF ( myid == 0 ) THEN
1603	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1604	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1605	ENDIF
1606	CALL local_stop
1607	ENDIF
1608
1609	!
1610	!-- Set the default interval for profiles entering the temporal average
1611	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1612	dt_averaging_input_pr = dt_averaging_input
1613	ENDIF
1614
1615	!
1616	!-- Set the default interval for the output of timeseries to a reasonable
1617	!-- value (tries to minimize the number of calls of flow_statistics)
1618	IF ( dt_dots == 9999999.9 ) THEN
1619	IF ( averaging_interval_pr == 0.0 ) THEN
1620	dt_dots = MIN( dt_run_control, dt_dopr )
1621	ELSE
1622	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1623	ENDIF
1624	ENDIF
1625
1626	!
1627	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1628	IF ( dt_averaging_input > averaging_interval ) THEN
1629	IF ( myid == 0 ) THEN
1630	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1631	dt_averaging_input, ' must be <= averaging_interval=', &
1632	averaging_interval
1633	ENDIF
1634	CALL local_stop
1635	ENDIF
1636
1637	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1638	IF ( myid == 0 ) THEN
1639	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1640	dt_averaging_input_pr, &
1641	' must be <= averaging_interval_pr=', &
1642	averaging_interval_pr
1643	ENDIF
1644	CALL local_stop
1645	ENDIF
1646
1647	!
1648	!-- Set the default value for the integration interval of precipitation amount
1649	IF ( precipitation ) THEN
1650	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1651	precipitation_amount_interval = dt_do2d_xy
1652	ELSE
1653	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1654	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
1655	'precipitation_amount_interval =', &
1656	precipitation_amount_interval, &
1657	' must not be larger than dt_do2d_xy', &
1658	' = ', dt_do2d_xy
1659	CALL local_stop
1660	ENDIF
1661	ENDIF
1662	ENDIF
1663
1664	!
1665	!-- Determine the number of output profiles and check whether they are
1666	!-- permissible
1667	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1668
1669	dopr_n = dopr_n + 1
1670	i = dopr_n
1671
1672	!
1673	!-- Determine internal profile number (for hom, homs)
1674	!-- and store height levels
1675	SELECT CASE ( TRIM( data_output_pr(i) ) )
1676
1677	CASE ( 'u', '#u' )
1678	dopr_index(i) = 1
1679	dopr_unit(i) = 'm/s'
1680	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1681	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1682	dopr_initial_index(i) = 5
1683	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1684	data_output_pr(i) = data_output_pr(i)(2:)
1685	ENDIF
1686
1687	CASE ( 'v', '#v' )
1688	dopr_index(i) = 2
1689	dopr_unit(i) = 'm/s'
1690	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1691	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1692	dopr_initial_index(i) = 6
1693	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1694	data_output_pr(i) = data_output_pr(i)(2:)
1695	ENDIF
1696
1697	CASE ( 'w' )
1698	dopr_index(i) = 3
1699	dopr_unit(i) = 'm/s'
1700	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1701
1702	CASE ( 'pt', '#pt' )
1703	IF ( .NOT. cloud_physics ) THEN
1704	dopr_index(i) = 4
1705	dopr_unit(i) = 'K'
1706	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1707	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1708	dopr_initial_index(i) = 7
1709	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1710	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1711	data_output_pr(i) = data_output_pr(i)(2:)
1712	ENDIF
1713	ELSE
1714	dopr_index(i) = 43
1715	dopr_unit(i) = 'K'
1716	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1717	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1718	dopr_initial_index(i) = 28
1719	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1720	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1721	data_output_pr(i) = data_output_pr(i)(2:)
1722	ENDIF
1723	ENDIF
1724
1725	CASE ( 'e' )
1726	dopr_index(i) = 8
1727	dopr_unit(i) = 'm2/s2'
1728	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1729	hom(nzb,2,8,:) = 0.0
1730
1731	CASE ( 'km', '#km' )
1732	dopr_index(i) = 9
1733	dopr_unit(i) = 'm2/s'
1734	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1735	hom(nzb,2,9,:) = 0.0
1736	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1737	dopr_initial_index(i) = 23
1738	hom(:,2,23,:) = hom(:,2,9,:)
1739	data_output_pr(i) = data_output_pr(i)(2:)
1740	ENDIF
1741
1742	CASE ( 'kh', '#kh' )
1743	dopr_index(i) = 10
1744	dopr_unit(i) = 'm2/s'
1745	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1746	hom(nzb,2,10,:) = 0.0
1747	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1748	dopr_initial_index(i) = 24
1749	hom(:,2,24,:) = hom(:,2,10,:)
1750	data_output_pr(i) = data_output_pr(i)(2:)
1751	ENDIF
1752
1753	CASE ( 'l', '#l' )
1754	dopr_index(i) = 11
1755	dopr_unit(i) = 'm'
1756	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1757	hom(nzb,2,11,:) = 0.0
1758	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1759	dopr_initial_index(i) = 25
1760	hom(:,2,25,:) = hom(:,2,11,:)
1761	data_output_pr(i) = data_output_pr(i)(2:)
1762	ENDIF
1763
1764	CASE ( 'w"u"' )
1765	dopr_index(i) = 12
1766	dopr_unit(i) = 'm2/s2'
1767	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1768	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1769
1770	CASE ( 'wu' )
1771	dopr_index(i) = 13
1772	dopr_unit(i) = 'm2/s2'
1773	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1774
1775	CASE ( 'w"v"' )
1776	dopr_index(i) = 14
1777	dopr_unit(i) = 'm2/s2'
1778	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1779	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1780
1781	CASE ( 'wv' )
1782	dopr_index(i) = 15
1783	dopr_unit(i) = 'm2/s2'
1784	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1785
1786	CASE ( 'w"pt"' )
1787	dopr_index(i) = 16
1788	dopr_unit(i) = 'K m/s'
1789	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1790
1791	CASE ( 'wpt' )
1792	dopr_index(i) = 17
1793	dopr_unit(i) = 'K m/s'
1794	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1795
1796	CASE ( 'wpt' )
1797	dopr_index(i) = 18
1798	dopr_unit(i) = 'K m/s'
1799	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1800
1801	CASE ( 'wu' )
1802	dopr_index(i) = 19
1803	dopr_unit(i) = 'm2/s2'
1804	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1805	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1806
1807	CASE ( 'wv' )
1808	dopr_index(i) = 20
1809	dopr_unit(i) = 'm2/s2'
1810	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1811	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1812
1813	CASE ( 'wptBC' )
1814	dopr_index(i) = 21
1815	dopr_unit(i) = 'K m/s'
1816	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1817
1818	CASE ( 'wptBC' )
1819	dopr_index(i) = 22
1820	dopr_unit(i) = 'K m/s'
1821	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1822
1823	CASE ( 'sa', '#sa' )
1824	IF ( .NOT. ocean ) THEN
1825	IF ( myid == 0 ) THEN
1826	PRINT*, '+++ check_parameters: data_output_pr = ', &
1827	data_output_pr(i), &
1828	' is not implemented for ocean = FALSE'
1829	ENDIF
1830	CALL local_stop
1831	ELSE
1832	dopr_index(i) = 23
1833	dopr_unit(i) = 'psu'
1834	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1835	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1836	dopr_initial_index(i) = 26
1837	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1838	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1839	data_output_pr(i) = data_output_pr(i)(2:)
1840	ENDIF
1841	ENDIF
1842
1843	CASE ( 'u*2' )
1844	dopr_index(i) = 30
1845	dopr_unit(i) = 'm2/s2'
1846	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1847
1848	CASE ( 'v*2' )
1849	dopr_index(i) = 31
1850	dopr_unit(i) = 'm2/s2'
1851	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1852
1853	CASE ( 'w*2' )
1854	dopr_index(i) = 32
1855	dopr_unit(i) = 'm2/s2'
1856	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1857
1858	CASE ( 'pt*2' )
1859	dopr_index(i) = 33
1860	dopr_unit(i) = 'K2'
1861	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1862
1863	CASE ( 'e*' )
1864	dopr_index(i) = 34
1865	dopr_unit(i) = 'm2/s2'
1866	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1867
1868	CASE ( 'w2pt' )
1869	dopr_index(i) = 35
1870	dopr_unit(i) = 'K m2/s2'
1871	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1872
1873	CASE ( 'wpt2' )
1874	dopr_index(i) = 36
1875	dopr_unit(i) = 'K2 m/s'
1876	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1877
1878	CASE ( 'we' )
1879	dopr_index(i) = 37
1880	dopr_unit(i) = 'm3/s3'
1881	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1882
1883	CASE ( 'w*3' )
1884	dopr_index(i) = 38
1885	dopr_unit(i) = 'm3/s3'
1886	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1887
1888	CASE ( 'Sw' )
1889	dopr_index(i) = 39
1890	dopr_unit(i) = 'none'
1891	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1892
1893	CASE ( 'q', '#q' )
1894	IF ( .NOT. humidity ) THEN
1895	IF ( myid == 0 ) THEN
1896	PRINT*, '+++ check_parameters: data_output_pr = ', &
1897	data_output_pr(i), &
1898	' is not implemented for humidity = FALSE'
1899	ENDIF
1900	CALL local_stop
1901	ELSE
1902	dopr_index(i) = 41
1903	dopr_unit(i) = 'kg/kg'
1904	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1905	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1906	dopr_initial_index(i) = 26
1907	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1908	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1909	data_output_pr(i) = data_output_pr(i)(2:)
1910	ENDIF
1911	ENDIF
1912
1913	CASE ( 's', '#s' )
1914	IF ( .NOT. passive_scalar ) THEN
1915	IF ( myid == 0 ) THEN
1916	PRINT*, '+++ check_parameters: data_output_pr = ', &
1917	data_output_pr(i), &
1918	' is not implemented for passive_scalar = FALSE'
1919	ENDIF
1920	CALL local_stop
1921	ELSE
1922	dopr_index(i) = 41
1923	dopr_unit(i) = 'kg/m3'
1924	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1925	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1926	dopr_initial_index(i) = 26
1927	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1928	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1929	data_output_pr(i) = data_output_pr(i)(2:)
1930	ENDIF
1931	ENDIF
1932
1933	CASE ( 'qv', '#qv' )
1934	IF ( .NOT. cloud_physics ) THEN
1935	dopr_index(i) = 41
1936	dopr_unit(i) = 'kg/kg'
1937	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1938	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1939	dopr_initial_index(i) = 26
1940	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1941	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1942	data_output_pr(i) = data_output_pr(i)(2:)
1943	ENDIF
1944	ELSE
1945	dopr_index(i) = 42
1946	dopr_unit(i) = 'kg/kg'
1947	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1948	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1949	dopr_initial_index(i) = 27
1950	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1951	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1952	data_output_pr(i) = data_output_pr(i)(2:)
1953	ENDIF
1954	ENDIF
1955
1956	CASE ( 'lpt', '#lpt' )
1957	IF ( .NOT. cloud_physics ) THEN
1958	IF ( myid == 0 ) THEN
1959	PRINT*, '+++ check_parameters: data_output_pr = ', &
1960	data_output_pr(i), &
1961	' is not implemented for cloud_physics = FALSE'
1962	ENDIF
1963	CALL local_stop
1964	ELSE
1965	dopr_index(i) = 4
1966	dopr_unit(i) = 'K'
1967	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1968	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1969	dopr_initial_index(i) = 7
1970	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1971	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1972	data_output_pr(i) = data_output_pr(i)(2:)
1973	ENDIF
1974	ENDIF
1975
1976	CASE ( 'vpt', '#vpt' )
1977	dopr_index(i) = 44
1978	dopr_unit(i) = 'K'
1979	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1980	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1981	dopr_initial_index(i) = 29
1982	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1983	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1984	data_output_pr(i) = data_output_pr(i)(2:)
1985	ENDIF
1986
1987	CASE ( 'w"vpt"' )
1988	dopr_index(i) = 45
1989	dopr_unit(i) = 'K m/s'
1990	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1991
1992	CASE ( 'wvpt' )
1993	dopr_index(i) = 46
1994	dopr_unit(i) = 'K m/s'
1995	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1996
1997	CASE ( 'wvpt' )
1998	dopr_index(i) = 47
1999	dopr_unit(i) = 'K m/s'
2000	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2001
2002	CASE ( 'w"q"' )
2003	IF ( .NOT. humidity ) THEN
2004	IF ( myid == 0 ) THEN
2005	PRINT*, '+++ check_parameters: data_output_pr = ', &
2006	data_output_pr(i), &
2007	' is not implemented for humidity = FALSE'
2008	ENDIF
2009	CALL local_stop
2010	ELSE
2011	dopr_index(i) = 48
2012	dopr_unit(i) = 'kg/kg m/s'
2013	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2014	ENDIF
2015
2016	CASE ( 'wq' )
2017	IF ( .NOT. humidity ) THEN
2018	IF ( myid == 0 ) THEN
2019	PRINT*, '+++ check_parameters: data_output_pr = ', &
2020	data_output_pr(i), &
2021	' is not implemented for humidity = FALSE'
2022	ENDIF
2023	CALL local_stop
2024	ELSE
2025	dopr_index(i) = 49
2026	dopr_unit(i) = 'kg/kg m/s'
2027	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2028	ENDIF
2029
2030	CASE ( 'wq' )
2031	IF ( .NOT. humidity ) THEN
2032	IF ( myid == 0 ) THEN
2033	PRINT*, '+++ check_parameters: data_output_pr = ', &
2034	data_output_pr(i), &
2035	' is not implemented for humidity = FALSE'
2036	ENDIF
2037	CALL local_stop
2038	ELSE
2039	dopr_index(i) = 50
2040	dopr_unit(i) = 'kg/kg m/s'
2041	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2042	ENDIF
2043
2044	CASE ( 'w"s"' )
2045	IF ( .NOT. passive_scalar ) THEN
2046	IF ( myid == 0 ) THEN
2047	PRINT*, '+++ check_parameters: data_output_pr = ', &
2048	data_output_pr(i), &
2049	' is not implemented for passive_scalar = FALSE'
2050	ENDIF
2051	CALL local_stop
2052	ELSE
2053	dopr_index(i) = 48
2054	dopr_unit(i) = 'kg/m3 m/s'
2055	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2056	ENDIF
2057
2058	CASE ( 'ws' )
2059	IF ( .NOT. passive_scalar ) THEN
2060	IF ( myid == 0 ) THEN
2061	PRINT*, '+++ check_parameters: data_output_pr = ', &
2062	data_output_pr(i), &
2063	' is not implemented for passive_scalar = FALSE'
2064	ENDIF
2065	CALL local_stop
2066	ELSE
2067	dopr_index(i) = 49
2068	dopr_unit(i) = 'kg/m3 m/s'
2069	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2070	ENDIF
2071
2072	CASE ( 'ws' )
2073	IF ( .NOT. passive_scalar ) THEN
2074	IF ( myid == 0 ) THEN
2075	PRINT*, '+++ check_parameters: data_output_pr = ', &
2076	data_output_pr(i), &
2077	' is not implemented for passive_scalar = FALSE'
2078	ENDIF
2079	CALL local_stop
2080	ELSE
2081	dopr_index(i) = 50
2082	dopr_unit(i) = 'kg/m3 m/s'
2083	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2084	ENDIF
2085
2086	CASE ( 'w"qv"' )
2087	IF ( humidity .AND. .NOT. cloud_physics ) &
2088	THEN
2089	dopr_index(i) = 48
2090	dopr_unit(i) = 'kg/kg m/s'
2091	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2092	ELSEIF( humidity .AND. cloud_physics ) THEN
2093	dopr_index(i) = 51
2094	dopr_unit(i) = 'kg/kg m/s'
2095	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2096	ELSE
2097	IF ( myid == 0 ) THEN
2098	PRINT*, '+++ check_parameters: data_output_pr = ', &
2099	data_output_pr(i), &
2100	' is not implemented for cloud_physics = FALSE', &
2101	' and humidity = FALSE'
2102	ENDIF
2103	CALL local_stop
2104	ENDIF
2105
2106	CASE ( 'wqv' )
2107	IF ( humidity .AND. .NOT. cloud_physics ) &
2108	THEN
2109	dopr_index(i) = 49
2110	dopr_unit(i) = 'kg/kg m/s'
2111	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2112	ELSEIF( humidity .AND. cloud_physics ) THEN
2113	dopr_index(i) = 52
2114	dopr_unit(i) = 'kg/kg m/s'
2115	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2116	ELSE
2117	IF ( myid == 0 ) THEN
2118	PRINT*, '+++ check_parameters: data_output_pr = ', &
2119	data_output_pr(i), &
2120	' is not implemented for cloud_physics = FALSE', &
2121	' and humidity = FALSE'
2122	ENDIF
2123	CALL local_stop
2124	ENDIF
2125
2126	CASE ( 'wqv' )
2127	IF ( humidity .AND. .NOT. cloud_physics ) &
2128	THEN
2129	dopr_index(i) = 50
2130	dopr_unit(i) = 'kg/kg m/s'
2131	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2132	ELSEIF( humidity .AND. cloud_physics ) THEN
2133	dopr_index(i) = 53
2134	dopr_unit(i) = 'kg/kg m/s'
2135	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2136	ELSE
2137	IF ( myid == 0 ) THEN
2138	PRINT*, '+++ check_parameters: data_output_pr = ', &
2139	data_output_pr(i), &
2140	' is not implemented for cloud_physics = FALSE', &
2141	' and humidity = FALSE'
2142	ENDIF
2143	CALL local_stop
2144	ENDIF
2145
2146	CASE ( 'ql' )
2147	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2148	IF ( myid == 0 ) THEN
2149	PRINT*, '+++ check_parameters: data_output_pr = ', &
2150	data_output_pr(i), &
2151	' is not implemented for cloud_physics = FALSE'
2152	ENDIF
2153	CALL local_stop
2154	ELSE
2155	dopr_index(i) = 54
2156	dopr_unit(i) = 'kg/kg'
2157	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2158	ENDIF
2159
2160	CASE ( 'wuu*/dz' )
2161	dopr_index(i) = 55
2162	dopr_unit(i) = 'm2/s3'
2163	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2164
2165	CASE ( 'wp/dz' )
2166	dopr_index(i) = 56
2167	dopr_unit(i) = 'm2/s3'
2168	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2169
2170	CASE ( 'w"e/dz' )
2171	dopr_index(i) = 57
2172	dopr_unit(i) = 'm2/s3'
2173	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2174
2175	CASE ( 'u"pt"' )
2176	dopr_index(i) = 58
2177	dopr_unit(i) = 'K m/s'
2178	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2179
2180	CASE ( 'upt' )
2181	dopr_index(i) = 59
2182	dopr_unit(i) = 'K m/s'
2183	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2184
2185	CASE ( 'upt_t' )
2186	dopr_index(i) = 60
2187	dopr_unit(i) = 'K m/s'
2188	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2189
2190	CASE ( 'v"pt"' )
2191	dopr_index(i) = 61
2192	dopr_unit(i) = 'K m/s'
2193	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2194
2195	CASE ( 'vpt' )
2196	dopr_index(i) = 62
2197	dopr_unit(i) = 'K m/s'
2198	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2199
2200	CASE ( 'vpt_t' )
2201	dopr_index(i) = 63
2202	dopr_unit(i) = 'K m/s'
2203	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2204
2205	CASE ( 'rho' )
2206	dopr_index(i) = 64
2207	dopr_unit(i) = 'kg/m3'
2208	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2209
2210	CASE ( 'w"sa"' )
2211	IF ( .NOT. ocean ) THEN
2212	IF ( myid == 0 ) THEN
2213	PRINT*, '+++ check_parameters: data_output_pr = ', &
2214	data_output_pr(i), &
2215	' is not implemented for ocean = FALSE'
2216	ENDIF
2217	CALL local_stop
2218	ELSE
2219	dopr_index(i) = 65
2220	dopr_unit(i) = 'psu m/s'
2221	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2222	ENDIF
2223
2224	CASE ( 'wsa' )
2225	IF ( .NOT. ocean ) THEN
2226	IF ( myid == 0 ) THEN
2227	PRINT*, '+++ check_parameters: data_output_pr = ', &
2228	data_output_pr(i), &
2229	' is not implemented for ocean = FALSE'
2230	ENDIF
2231	CALL local_stop
2232	ELSE
2233	dopr_index(i) = 66
2234	dopr_unit(i) = 'psu m/s'
2235	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2236	ENDIF
2237
2238	CASE ( 'wsa' )
2239	IF ( .NOT. ocean ) THEN
2240	IF ( myid == 0 ) THEN
2241	PRINT*, '+++ check_parameters: data_output_pr = ', &
2242	data_output_pr(i), &
2243	' is not implemented for ocean = FALSE'
2244	ENDIF
2245	CALL local_stop
2246	ELSE
2247	dopr_index(i) = 67
2248	dopr_unit(i) = 'psu m/s'
2249	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2250	ENDIF
2251
2252	CASE ( 'wp' )
2253	dopr_index(i) = 68
2254	dopr_unit(i) = 'm3/s3'
2255	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2256
2257	CASE ( 'w"e' )
2258	dopr_index(i) = 69
2259	dopr_unit(i) = 'm3/s3'
2260	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2261
2262	CASE ( 'q*2' )
2263	IF ( .NOT. humidity ) THEN
2264	IF ( myid == 0 ) THEN
2265	PRINT*, '+++ check_parameters: data_output_pr = ', &
2266	data_output_pr(i), &
2267	' is not implemented for humidity = FALSE'
2268	ENDIF
2269	CALL local_stop
2270	ELSE
2271	dopr_index(i) = 70
2272	dopr_unit(i) = 'kg2/kg2'
2273	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2274	ENDIF
2275
2276	CASE DEFAULT
2277
2278	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2279
2280	IF ( unit == 'illegal' ) THEN
2281	IF ( myid == 0 ) THEN
2282	IF ( data_output_pr_user(1) /= ' ' ) THEN
2283	PRINT*, '+++ check_parameters: illegal value for data_',&
2284	'output_pr or data_output_pr_user: "', &
2285	TRIM( data_output_pr(i) ), '"'
2286	ELSE
2287	PRINT*, '+++ check_parameters: illegal value for data_',&
2288	'output_pr: "', TRIM( data_output_pr(i) ),'"'
2289	ENDIF
2290	ENDIF
2291	CALL local_stop
2292	ENDIF
2293
2294	END SELECT
2295	!
2296	!-- Check to which of the predefined coordinate systems the profile belongs
2297	DO k = 1, crmax
2298	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2299	/=0 ) &
2300	THEN
2301	dopr_crossindex(i) = k
2302	EXIT
2303	ENDIF
2304	ENDDO
2305	!
2306	!-- Generate the text for the labels of the PROFIL output file. "-characters
2307	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2308	!-- control characters
2309	dopr_label(i) = data_output_pr(i)
2310	position = INDEX( dopr_label(i) , '"' )
2311	DO WHILE ( position /= 0 )
2312	dopr_label(i)(position:position) = ''''
2313	position = INDEX( dopr_label(i) , '"' )
2314	ENDDO
2315
2316	ENDDO
2317
2318	!
2319	!-- y-value range of the coordinate system (PROFIL).
2320	!-- x-value range determined in plot_1d.
2321	IF ( .NOT. ocean ) THEN
2322	cross_uymin = 0.0
2323	IF ( z_max_do1d == -1.0 ) THEN
2324	cross_uymax = zu(nzt+1)
2325	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2326	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
2327	z_max_do1d,' must be >= ', zu(nzb+1), &
2328	' or <= ', zu(nzt+1)
2329	CALL local_stop
2330	ELSE
2331	cross_uymax = z_max_do1d
2332	ENDIF
2333	ENDIF
2334
2335	!
2336	!-- Check whether the chosen normalizing factor for the coordinate systems is
2337	!-- permissible
2338	DO i = 1, crmax
2339	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2340
2341	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2342	j = 0
2343
2344	CASE DEFAULT
2345	IF ( myid == 0 ) THEN
2346	PRINT*, '+++ check_parameters: unknown normalize method'
2347	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
2348	ENDIF
2349	CALL local_stop
2350
2351	END SELECT
2352	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2353
2354	CASE ( '', 'z_i' )
2355	j = 0
2356
2357	CASE DEFAULT
2358	IF ( myid == 0 ) THEN
2359	PRINT*, '+++ check_parameters: unknown normalize method'
2360	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
2361	ENDIF
2362	CALL local_stop
2363
2364	END SELECT
2365	ENDDO
2366	!
2367	!-- Check normalized y-value range of the coordinate system (PROFIL)
2368	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2369	THEN
2370	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
2371	'd=', z_max_do1d_normalized, ' must be >= 0.0'
2372	CALL local_stop
2373	ENDIF
2374
2375
2376	!
2377	!-- Append user-defined data output variables to the standard data output
2378	IF ( data_output_user(1) /= ' ' ) THEN
2379	i = 1
2380	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2381	i = i + 1
2382	ENDDO
2383	j = 1
2384	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2385	IF ( i > 100 ) THEN
2386	IF ( myid == 0 ) THEN
2387	PRINT*, '+++ check_parameters: number of output quantitities', &
2388	' given by data_output and data_output_user'
2389	PRINT*, ' exceeds the limit of 100'
2390	ENDIF
2391	CALL local_stop
2392	ENDIF
2393	data_output(i) = data_output_user(j)
2394	i = i + 1
2395	j = j + 1
2396	ENDDO
2397	ENDIF
2398
2399	!
2400	!-- Check and set steering parameters for 2d/3d data output and averaging
2401	i = 1
2402	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2403	!
2404	!-- Check for data averaging
2405	ilen = LEN_TRIM( data_output(i) )
2406	j = 0 ! no data averaging
2407	IF ( ilen > 3 ) THEN
2408	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2409	j = 1 ! data averaging
2410	data_output(i) = data_output(i)(1:ilen-3)
2411	ENDIF
2412	ENDIF
2413	!
2414	!-- Check for cross section or volume data
2415	ilen = LEN_TRIM( data_output(i) )
2416	k = 0 ! 3d data
2417	var = data_output(i)(1:ilen)
2418	IF ( ilen > 3 ) THEN
2419	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2420	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2421	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2422	k = 1 ! 2d data
2423	var = data_output(i)(1:ilen-3)
2424	ENDIF
2425	ENDIF
2426	!
2427	!-- Check for allowed value and set units
2428	SELECT CASE ( TRIM( var ) )
2429
2430	CASE ( 'e' )
2431	IF ( constant_diffusion ) THEN
2432	IF ( myid == 0 ) THEN
2433	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2434	'" requires constant_diffusion = .FALSE.'
2435	ENDIF
2436	CALL local_stop
2437	ENDIF
2438	unit = 'm2/s2'
2439
2440	CASE ( 'pc', 'pr' )
2441	IF ( .NOT. particle_advection ) THEN
2442	IF ( myid == 0 ) THEN
2443	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2444	'" requires a "particles_par"-NAMELIST'
2445	PRINT*, ' in the parameter file (PARIN)'
2446	ENDIF
2447	CALL local_stop
2448	ENDIF
2449	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2450	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2451
2452	CASE ( 'q', 'vpt' )
2453	IF ( .NOT. humidity ) THEN
2454	IF ( myid == 0 ) THEN
2455	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2456	'" requires humidity = .TRUE.'
2457	ENDIF
2458	CALL local_stop
2459	ENDIF
2460	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2461	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2462
2463	CASE ( 'ql' )
2464	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2465	IF ( myid == 0 ) THEN
2466	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2467	'" requires cloud_physics = .TRUE.'
2468	PRINT*, ' or cloud_droplets = .TRUE.'
2469	ENDIF
2470	CALL local_stop
2471	ENDIF
2472	unit = 'kg/kg'
2473
2474	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2475	IF ( .NOT. cloud_droplets ) THEN
2476	IF ( myid == 0 ) THEN
2477	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2478	'" requires cloud_droplets = .TRUE.'
2479	ENDIF
2480	CALL local_stop
2481	ENDIF
2482	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2483	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2484	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2485
2486	CASE ( 'qv' )
2487	IF ( .NOT. cloud_physics ) THEN
2488	IF ( myid == 0 ) THEN
2489	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2490	'" requires cloud_physics = .TRUE.'
2491	ENDIF
2492	CALL local_stop
2493	ENDIF
2494	unit = 'kg/kg'
2495
2496	CASE ( 'rho' )
2497	IF ( .NOT. ocean ) THEN
2498	IF ( myid == 0 ) THEN
2499	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2500	'" requires ocean = .TRUE.'
2501	ENDIF
2502	CALL local_stop
2503	ENDIF
2504	unit = 'kg/m3'
2505
2506	CASE ( 's' )
2507	IF ( .NOT. passive_scalar ) THEN
2508	IF ( myid == 0 ) THEN
2509	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2510	'" requires passive_scalar = .TRUE.'
2511	ENDIF
2512	CALL local_stop
2513	ENDIF
2514	unit = 'conc'
2515
2516	CASE ( 'sa' )
2517	IF ( .NOT. ocean ) THEN
2518	IF ( myid == 0 ) THEN
2519	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2520	'" requires ocean = .TRUE.'
2521	ENDIF
2522	CALL local_stop
2523	ENDIF
2524	unit = 'psu'
2525
2526	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2527	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2528	IF ( myid == 0 ) THEN
2529	PRINT*, '+++ check_parameters: illegal value for data_',&
2530	'output: "', TRIM( var ), '" is only allowed'
2531	PRINT*, ' for horizontal cross section'
2532	ENDIF
2533	CALL local_stop
2534	ENDIF
2535	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2536	IF ( myid == 0 ) THEN
2537	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2538	'" requires cloud_physics = .TRUE.'
2539	ENDIF
2540	CALL local_stop
2541	ENDIF
2542	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2543	IF ( myid == 0 ) THEN
2544	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2545	'" requires precipitation = .TRUE.'
2546	ENDIF
2547	CALL local_stop
2548	ENDIF
2549	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2550	IF ( myid == 0 ) THEN
2551	PRINT*, '+++ check_parameters: temporal averaging of ', &
2552	' precipitation amount "', TRIM( var ), &
2553	'" not possible'
2554	ENDIF
2555	CALL local_stop
2556	ENDIF
2557	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2558	IF ( myid == 0 ) THEN
2559	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2560	'" requires precipitation = .TRUE.'
2561	ENDIF
2562	CALL local_stop
2563	ENDIF
2564
2565
2566	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2567	IF ( TRIM( var ) == 't*' ) unit = 'K'
2568	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2569	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2570	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2571	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2572
2573	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2574	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2575	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2576	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2577	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2578	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2579	CONTINUE
2580
2581	CASE DEFAULT
2582	CALL user_check_data_output( var, unit )
2583
2584	IF ( unit == 'illegal' ) THEN
2585	IF ( myid == 0 ) THEN
2586	IF ( data_output_user(1) /= ' ' ) THEN
2587	PRINT*, '+++ check_parameters: illegal value for data_',&
2588	'output or data_output_user: "', &
2589	TRIM( data_output(i) ), '"'
2590	ELSE
2591	PRINT*, '+++ check_parameters: illegal value for data_',&
2592	'output: "', TRIM( data_output(i) ), '"'
2593	ENDIF
2594	ENDIF
2595	CALL local_stop
2596	ENDIF
2597
2598	END SELECT
2599	!
2600	!-- Set the internal steering parameters appropriately
2601	IF ( k == 0 ) THEN
2602	do3d_no(j) = do3d_no(j) + 1
2603	do3d(j,do3d_no(j)) = data_output(i)
2604	do3d_unit(j,do3d_no(j)) = unit
2605	ELSE
2606	do2d_no(j) = do2d_no(j) + 1
2607	do2d(j,do2d_no(j)) = data_output(i)
2608	do2d_unit(j,do2d_no(j)) = unit
2609	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2610	data_output_xy(j) = .TRUE.
2611	ENDIF
2612	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2613	data_output_xz(j) = .TRUE.
2614	ENDIF
2615	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2616	data_output_yz(j) = .TRUE.
2617	ENDIF
2618	ENDIF
2619
2620	IF ( j == 1 ) THEN
2621	!
2622	!-- Check, if variable is already subject to averaging
2623	found = .FALSE.
2624	DO k = 1, doav_n
2625	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2626	ENDDO
2627
2628	IF ( .NOT. found ) THEN
2629	doav_n = doav_n + 1
2630	doav(doav_n) = var
2631	ENDIF
2632	ENDIF
2633
2634	i = i + 1
2635	ENDDO
2636
2637	!
2638	!-- Store sectional planes in one shared array
2639	section(:,1) = section_xy
2640	section(:,2) = section_xz
2641	section(:,3) = section_yz
2642
2643	!
2644	!-- Upper plot limit (grid point value) for 1D profiles
2645	IF ( z_max_do1d == -1.0 ) THEN
2646	nz_do1d = nzt+1
2647	ELSE
2648	DO k = nzb+1, nzt+1
2649	nz_do1d = k
2650	IF ( zw(k) > z_max_do1d ) EXIT
2651	ENDDO
2652	ENDIF
2653
2654	!
2655	!-- Upper plot limit for 2D vertical sections
2656	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2657	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2658	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
2659	z_max_do2d, ' must be >= ', zu(nzb+1), &
2660	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
2661	CALL local_stop
2662	ENDIF
2663
2664	!
2665	!-- Upper plot limit for 3D arrays
2666	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2667
2668	!
2669	!-- Determine and check accuracy for compressed 3D plot output
2670	IF ( do3d_compress ) THEN
2671	!
2672	!-- Compression only permissible on T3E machines
2673	IF ( host(1:3) /= 't3e' ) THEN
2674	IF ( myid == 0 ) THEN
2675	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
2676	'ed on host "', TRIM( host ), '"'
2677	ENDIF
2678	CALL local_stop
2679	ENDIF
2680
2681	i = 1
2682	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2683
2684	ilen = LEN_TRIM( do3d_comp_prec(i) )
2685	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2686	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2687	IF ( myid == 0 ) THEN
2688	PRINT*, '+++ check_parameters: illegal precision: ', &
2689	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
2690	ENDIF
2691	CALL local_stop
2692	ENDIF
2693
2694	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2695	var = do3d_comp_prec(i)(1:ilen-1)
2696
2697	SELECT CASE ( var )
2698
2699	CASE ( 'u' )
2700	j = 1
2701	CASE ( 'v' )
2702	j = 2
2703	CASE ( 'w' )
2704	j = 3
2705	CASE ( 'p' )
2706	j = 4
2707	CASE ( 'pt' )
2708	j = 5
2709
2710	CASE DEFAULT
2711	IF ( myid == 0 ) THEN
2712	PRINT*, '+++ check_parameters: unknown variable in ', &
2713	'assignment'
2714	PRINT*, ' do3d_comp_prec(', i, ')="', &
2715	TRIM( do3d_comp_prec(i) ),'"'
2716	ENDIF
2717	CALL local_stop
2718
2719	END SELECT
2720
2721	plot_3d_precision(j)%precision = prec
2722	i = i + 1
2723
2724	ENDDO
2725	ENDIF
2726
2727	!
2728	!-- Check the data output format(s)
2729	IF ( data_output_format(1) == ' ' ) THEN
2730	!
2731	!-- Default value
2732	netcdf_output = .TRUE.
2733	ELSE
2734	i = 1
2735	DO WHILE ( data_output_format(i) /= ' ' )
2736
2737	SELECT CASE ( data_output_format(i) )
2738
2739	CASE ( 'netcdf' )
2740	netcdf_output = .TRUE.
2741	CASE ( 'iso2d' )
2742	iso2d_output = .TRUE.
2743	CASE ( 'profil' )
2744	profil_output = .TRUE.
2745	CASE ( 'avs' )
2746	avs_output = .TRUE.
2747
2748	CASE DEFAULT
2749	IF ( myid == 0 ) THEN
2750	PRINT*, '+++ check_parameters:'
2751	PRINT*, ' unknown value for data_output_format "', &
2752	TRIM( data_output_format(i) ),'"'
2753	ENDIF
2754	CALL local_stop
2755
2756	END SELECT
2757
2758	i = i + 1
2759	IF ( i > 10 ) EXIT
2760
2761	ENDDO
2762
2763	ENDIF
2764
2765	!
2766	!-- Check netcdf precison
2767	ldum = .FALSE.
2768	CALL define_netcdf_header( 'ch', ldum, 0 )
2769
2770	!
2771	!-- Check, whether a constant diffusion coefficient shall be used
2772	IF ( km_constant /= -1.0 ) THEN
2773	IF ( km_constant < 0.0 ) THEN
2774	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2775	km_constant, ' < 0.0'
2776	CALL local_stop
2777	ELSE
2778	IF ( prandtl_number < 0.0 ) THEN
2779	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2780	prandtl_number, ' < 0.0'
2781	CALL local_stop
2782	ENDIF
2783	constant_diffusion = .TRUE.
2784
2785	IF ( prandtl_layer ) THEN
2786	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2787	'is not allowed with fixed value of km'
2788	CALL local_stop
2789	ENDIF
2790	ENDIF
2791	ENDIF
2792
2793	!
2794	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2795	!-- for the horizontal diffusivity used within the outflow damping layer,
2796	!-- and check/set the width of the damping layer
2797	IF ( bc_lr /= 'cyclic' ) THEN
2798	IF ( km_damp_max == -1.0 ) THEN
2799	km_damp_max = 0.5 * dx
2800	ENDIF
2801	IF ( outflow_damping_width == -1.0 ) THEN
2802	outflow_damping_width = MIN( 20, nx/2 )
2803	ENDIF
2804	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2805	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2806	'idth out of range'
2807	CALL local_stop
2808	ENDIF
2809	ENDIF
2810
2811	IF ( bc_ns /= 'cyclic' ) THEN
2812	IF ( km_damp_max == -1.0 ) THEN
2813	km_damp_max = 0.5 * dy
2814	ENDIF
2815	IF ( outflow_damping_width == -1.0 ) THEN
2816	outflow_damping_width = MIN( 20, ny/2 )
2817	ENDIF
2818	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2819	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2820	'idth out of range'
2821	CALL local_stop
2822	ENDIF
2823	ENDIF
2824
2825	!
2826	!-- Check value range for rif
2827	IF ( rif_min >= rif_max ) THEN
2828	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2829	' must be less than rif_max=', rif_max
2830	CALL local_stop
2831	ENDIF
2832
2833	!
2834	!-- Determine upper and lower hight level indices for random perturbations
2835	IF ( disturbance_level_b == -9999999.9 ) THEN
2836	IF ( ocean ) THEN
2837	disturbance_level_b = zu((nzt*2)/3)
2838	disturbance_level_ind_b = ( nzt * 2 ) / 3
2839	ELSE
2840	disturbance_level_b = zu(nzb+3)
2841	disturbance_level_ind_b = nzb + 3
2842	ENDIF
2843	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2844	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2845	disturbance_level_b, ' must be >= ',zu(3), &
2846	'(zu(3))'
2847	CALL local_stop
2848	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2849	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2850	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2851	'(zu(nzt-2))'
2852	CALL local_stop
2853	ELSE
2854	DO k = 3, nzt-2
2855	IF ( disturbance_level_b <= zu(k) ) THEN
2856	disturbance_level_ind_b = k
2857	EXIT
2858	ENDIF
2859	ENDDO
2860	ENDIF
2861
2862	IF ( disturbance_level_t == -9999999.9 ) THEN
2863	IF ( ocean ) THEN
2864	disturbance_level_t = zu(nzt-3)
2865	disturbance_level_ind_t = nzt - 3
2866	ELSE
2867	disturbance_level_t = zu(nzt/3)
2868	disturbance_level_ind_t = nzt / 3
2869	ENDIF
2870	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2871	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2872	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2873	'(zu(nzt-2))'
2874	CALL local_stop
2875	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2876	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2877	disturbance_level_t, ' must be >= ', &
2878	'disturbance_level_b=', disturbance_level_b
2879	CALL local_stop
2880	ELSE
2881	DO k = 3, nzt-2
2882	IF ( disturbance_level_t <= zu(k) ) THEN
2883	disturbance_level_ind_t = k
2884	EXIT
2885	ENDIF
2886	ENDDO
2887	ENDIF
2888
2889	!
2890	!-- Check again whether the levels determined this way are ok.
2891	!-- Error may occur at automatic determination and too few grid points in
2892	!-- z-direction.
2893	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2894	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2895	'disturbance_level_ind_t=', &
2896	disturbance_level_ind_t, ' must be >= ', &
2897	'disturbance_level_ind_b=', &
2898	disturbance_level_ind_b
2899	CALL local_stop
2900	ENDIF
2901
2902	!
2903	!-- Determine the horizontal index range for random perturbations.
2904	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2905	!-- near the inflow and the perturbation area is further limited to ...(1)
2906	!-- after the initial phase of the flow.
2907	dist_nxl = 0; dist_nxr = nx
2908	dist_nys = 0; dist_nyn = ny
2909	IF ( bc_lr /= 'cyclic' ) THEN
2910	IF ( inflow_disturbance_begin == -1 ) THEN
2911	inflow_disturbance_begin = MIN( 10, nx/2 )
2912	ENDIF
2913	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2914	THEN
2915	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2916	'_begin out of range'
2917	CALL local_stop
2918	ENDIF
2919	IF ( inflow_disturbance_end == -1 ) THEN
2920	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2921	ENDIF
2922	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2923	THEN
2924	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2925	'_end out of range'
2926	CALL local_stop
2927	ENDIF
2928	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2929	IF ( inflow_disturbance_begin == -1 ) THEN
2930	inflow_disturbance_begin = MIN( 10, ny/2 )
2931	ENDIF
2932	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2933	THEN
2934	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2935	'_begin out of range'
2936	CALL local_stop
2937	ENDIF
2938	IF ( inflow_disturbance_end == -1 ) THEN
2939	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2940	ENDIF
2941	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2942	THEN
2943	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2944	'_end out of range'
2945	CALL local_stop
2946	ENDIF
2947	ENDIF
2948
2949	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2950	dist_nxr = nx - inflow_disturbance_begin
2951	dist_nxl(1) = nx - inflow_disturbance_end
2952	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2953	dist_nxl = inflow_disturbance_begin
2954	dist_nxr(1) = inflow_disturbance_end
2955	ENDIF
2956	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2957	dist_nyn = ny - inflow_disturbance_begin
2958	dist_nys(1) = ny - inflow_disturbance_end
2959	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2960	dist_nys = inflow_disturbance_begin
2961	dist_nyn(1) = inflow_disturbance_end
2962	ENDIF
2963
2964	!
2965	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2966	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2967	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2968	IF ( myid == 0 ) THEN
2969	PRINT*, '+++ check_parameters:'
2970	PRINT*, ' turbulent_inflow = .T. requires a Dirichlet condition', &
2971	' at the inflow boundary'
2972	ENDIF
2973	CALL local_stop
2974	ENDIF
2975
2976	!
2977	!-- In case of turbulent inflow calculate the index of the recycling plane
2978	IF ( turbulent_inflow ) THEN
2979	IF ( recycling_width == 9999999.9 ) THEN
2980	!
2981	!-- Set the default value for the width of the recycling domain
2982	recycling_width = 0.1 * nx * dx
2983	ELSE
2984	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2985	IF ( myid == 0 ) THEN
2986	PRINT*, '+++ check_parameters:'
2987	PRINT*, ' illegal value for recycling_width: ', &
2988	recycling_width
2989	ENDIF
2990	CALL local_stop
2991	ENDIF
2992	ENDIF
2993	!
2994	!-- Calculate the index
2995	recycling_plane = recycling_width / dx
2996	ENDIF
2997
2998	!
2999	!-- Check random generator
3000	IF ( random_generator /= 'system-specific' .AND. &
3001	random_generator /= 'numerical-recipes' ) THEN
3002	IF ( myid == 0 ) THEN
3003	PRINT*, '+++ check_parameters:'
3004	PRINT*, ' unknown random generator: random_generator=', &
3005	random_generator
3006	ENDIF
3007	CALL local_stop
3008	ENDIF
3009
3010	!
3011	!-- Determine damping level index for 1D model
3012	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3013	IF ( damp_level_1d == -1.0 ) THEN
3014	damp_level_1d = zu(nzt+1)
3015	damp_level_ind_1d = nzt + 1
3016	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3017	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
3018	damp_level_1d, ' must be > 0.0 and < ', &
3019	'zu(nzt+1)', zu(nzt+1)
3020	CALL local_stop
3021	ELSE
3022	DO k = 1, nzt+1
3023	IF ( damp_level_1d <= zu(k) ) THEN
3024	damp_level_ind_1d = k
3025	EXIT
3026	ENDIF
3027	ENDDO
3028	ENDIF
3029	ENDIF
3030	!
3031	!-- Check some other 1d-model parameters
3032	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3033	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3034	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
3035	TRIM( mixing_length_1d ), '" is unknown'
3036	CALL local_stop
3037	ENDIF
3038	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3039	TRIM( dissipation_1d ) /= 'detering' ) THEN
3040	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
3041	TRIM( dissipation_1d ), '" is unknown'
3042	CALL local_stop
3043	ENDIF
3044
3045	!
3046	!-- Set time for the next user defined restart (time_restart is the
3047	!-- internal parameter for steering restart events)
3048	IF ( restart_time /= 9999999.9 ) THEN
3049	IF ( restart_time > simulated_time ) time_restart = restart_time
3050	ELSE
3051	!
3052	!-- In case of a restart run, set internal parameter to default (no restart)
3053	!-- if the NAMELIST-parameter restart_time is omitted
3054	time_restart = 9999999.9
3055	ENDIF
3056
3057	!
3058	!-- Set default value of the time needed to terminate a model run
3059	IF ( termination_time_needed == -1.0 ) THEN
3060	IF ( host(1:3) == 'ibm' ) THEN
3061	termination_time_needed = 300.0
3062	ELSE
3063	termination_time_needed = 35.0
3064	ENDIF
3065	ENDIF
3066
3067	!
3068	!-- Check the time needed to terminate a model run
3069	IF ( host(1:3) == 't3e' ) THEN
3070	!
3071	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3072	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3073	IF ( termination_time_needed <= 30.0 ) THEN
3074	IF ( myid == 0 ) THEN
3075	PRINT*, '+++ check_parameters: termination_time_needed', &
3076	termination_time_needed
3077	PRINT*, ' must be > 30.0 on host "', host, &
3078	'"'
3079	ENDIF
3080	CALL local_stop
3081	ENDIF
3082	ELSEIF ( host(1:3) == 'ibm' ) THEN
3083	!
3084	!-- On IBM-regatta machines the time should be at least 300 seconds,
3085	!-- because the job time consumed before executing palm (for compiling,
3086	!-- copying of files, etc.) has to be regarded
3087	IF ( termination_time_needed < 300.0 ) THEN
3088	IF ( myid == 0 ) THEN
3089	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
3090	'needed', termination_time_needed
3091	PRINT*, ' should be >= 300.0', &
3092	' on host "', host, '"'
3093	ENDIF
3094	ENDIF
3095	ENDIF
3096
3097
3098	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |