Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1267

Last change on this file since 1267 was 1242, checked in by heinze, 11 years ago
Last commmit documented
Property svn:keywords set to `Id`
File size: 143.1 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1242 2013-10-30 11:50:11Z heinze $
27	!
28	! 1241 2013-10-30 11:36:58Z heinze
29	! output for profiles of ug and vg added
30	! set surface_heatflux and surface_waterflux also in dependence on
31	! large_scale_forcing
32	! checks for nudging and large scale forcing from external file
33	!
34	! 1236 2013-09-27 07:21:13Z raasch
35	! check number of spectra levels
36	!
37	! 1216 2013-08-26 09:31:42Z raasch
38	! check for transpose_compute_overlap (temporary)
39	!
40	! 1214 2013-08-21 12:29:17Z kanani
41	! additional check for simultaneous use of vertical grid stretching
42	! and particle advection
43	!
44	! 1212 2013-08-15 08:46:27Z raasch
45	! checks for poisfft_hybrid removed
46	!
47	! 1210 2013-08-14 10:58:20Z raasch
48	! check for fftw
49	!
50	! 1179 2013-06-14 05:57:58Z raasch
51	! checks and settings of buoyancy parameters and switches revised,
52	! initial profile for rho added to hom (id=77)
53	!
54	! 1174 2013-05-31 10:28:08Z gryschka
55	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
56	!
57	! 1159 2013-05-21 11:58:22Z fricke
58	! bc_lr/ns_dirneu/neudir removed
59	!
60	! 1115 2013-03-26 18:16:16Z hoffmann
61	! unused variables removed
62	! drizzle can be used without precipitation
63	!
64	! 1111 2013-03-08 23:54:10Z raasch
65	! ibc_p_b = 2 removed
66	!
67	! 1103 2013-02-20 02:15:53Z raasch
68	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
69	!
70	! 1092 2013-02-02 11:24:22Z raasch
71	! unused variables removed
72	!
73	! 1069 2012-11-28 16:18:43Z maronga
74	! allow usage of topography in combination with cloud physics
75	!
76	! 1065 2012-11-22 17:42:36Z hoffmann
77	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
78	! precipitation in order to save computational resources.
79	!
80	! 1060 2012-11-21 07:19:51Z raasch
81	! additional check for parameter turbulent_inflow
82	!
83	! 1053 2012-11-13 17:11:03Z hoffmann
84	! necessary changes for the new two-moment cloud physics scheme added:
85	! - check cloud physics scheme (Kessler or Seifert and Beheng)
86	! - plant_canopy is not allowed
87	! - currently, only cache loop_optimization is allowed
88	! - initial profiles of nr, qr
89	! - boundary condition of nr, qr
90	! - check output quantities (qr, nr, prr)
91	!
92	! 1036 2012-10-22 13:43:42Z raasch
93	! code put under GPL (PALM 3.9)
94	!
95	! 1031/1034 2012-10-22 11:32:49Z raasch
96	! check of netcdf4 parallel file support
97	!
98	! 1019 2012-09-28 06:46:45Z raasch
99	! non-optimized version of prognostic_equations not allowed any more
100	!
101	! 1015 2012-09-27 09:23:24Z raasch
102	! acc allowed for loop optimization,
103	! checks for adjustment of mixing length to the Prandtl mixing length removed
104	!
105	! 1003 2012-09-14 14:35:53Z raasch
106	! checks for cases with unequal subdomain sizes removed
107	!
108	! 1001 2012-09-13 14:08:46Z raasch
109	! all actions concerning leapfrog- and upstream-spline-scheme removed
110	!
111	! 996 2012-09-07 10:41:47Z raasch
112	! little reformatting
113
114	! 978 2012-08-09 08:28:32Z fricke
115	! setting of bc_lr/ns_dirneu/neudir
116	! outflow damping layer removed
117	! check for z0h*
118	! check for pt_damping_width
119	!
120	! 964 2012-07-26 09:14:24Z raasch
121	! check of old profil-parameters removed
122	!
123	! 940 2012-07-09 14:31:00Z raasch
124	! checks for parameter neutral
125	!
126	! 924 2012-06-06 07:44:41Z maronga
127	! Bugfix: preprocessor directives caused error during compilation
128	!
129	! 892 2012-05-02 13:51:44Z maronga
130	! Bugfix for parameter file check ( excluding __netcdf4 )
131	!
132	! 866 2012-03-28 06:44:41Z raasch
133	! use only 60% of the geostrophic wind as translation speed in case of Galilean
134	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
135	! timestep
136	!
137	! 861 2012-03-26 14:18:34Z suehring
138	! Check for topography and ws-scheme removed.
139	! Check for loop_optimization = 'vector' and ws-scheme removed.
140	!
141	! 845 2012-03-07 10:23:05Z maronga
142	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
143	!
144	! 828 2012-02-21 12:00:36Z raasch
145	! check of collision_kernel extended
146	!
147	! 825 2012-02-19 03:03:44Z raasch
148	! check for collision_kernel and curvature_solution_effects
149	!
150	! 809 2012-01-30 13:32:58Z maronga
151	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
152	!
153	! 807 2012-01-25 11:53:51Z maronga
154	! New cpp directive "__check" implemented which is used by check_namelist_files
155	!
156	! 774 2011-10-27 13:34:16Z letzel
157	! bugfix for prescribed u,v-profiles
158	!
159	! 767 2011-10-14 06:39:12Z raasch
160	! Calculating u,v-profiles from given profiles by linear interpolation.
161	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
162	!
163	! 707 2011-03-29 11:39:40Z raasch
164	! setting of bc_lr/ns_dirrad/raddir
165	!
166	! 689 2011-02-20 19:31:12z gryschka
167	! Bugfix for some logical expressions
168	! (syntax was not compatible with all compilers)
169	!
170	! 680 2011-02-04 23:16:06Z gryschka
171	! init_vortex is not allowed with volume_flow_control
172	!
173	! 673 2011-01-18 16:19:48Z suehring
174	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
175	!
176	! 667 2010-12-23 12:06:00Z suehring/gryschka
177	! Exchange of parameters between ocean and atmosphere via PE0
178	! Check for illegal combination of ws-scheme and timestep scheme.
179	! Check for topography and ws-scheme.
180	! Check for not cyclic boundary conditions in combination with ws-scheme and
181	! loop_optimization = 'vector'.
182	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
183	! Different processor/grid topology in atmosphere and ocean is now allowed!
184	! Bugfixes in checking for conserve_volume_flow_mode
185	! 600 2010-11-24 16:10:51Z raasch
186	! change due to new default value of surface_waterflux
187	! 580 2010-10-05 13:59:11Z heinze
188	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
189	!
190	! 567 2010-10-01 10:46:30Z helmke
191	! calculating masks changed
192	!
193	! 564 2010-09-30 13:18:59Z helmke
194	! palm message identifiers of masked output changed, 20 replaced by max_masks
195	!
196	! 553 2010-09-01 14:09:06Z weinreis
197	! masks is calculated and removed from inipar
198	!
199	! 531 2010-04-21 06:47:21Z heinze
200	! Bugfix: unit of hyp changed to dbar
201	!
202	! 524 2010-03-30 02:04:51Z raasch
203	! Bugfix: "/" in netcdf profile variable names replaced by ":"
204	!
205	! 493 2010-03-01 08:30:24Z raasch
206	! netcdf_data_format is checked
207	!
208	! 411 2009-12-11 14:15:58Z heinze
209	! Enabled passive scalar/humidity wall fluxes for non-flat topography
210	! Initialization of large scale vertical motion (subsidence/ascent)
211	!
212	! 410 2009-12-04 17:05:40Z letzel
213	! masked data output
214	!
215	! 388 2009-09-23 09:40:33Z raasch
216	! Check profiles fpr prho and hyp.
217	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
218	! interval has been set, respective error message is included
219	! bc_lr_cyc and bc_ns_cyc are set,
220	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
221	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
222	! Coupling with independent precursor runs.
223	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
224	! Bugfix: pressure included for profile output
225	! Check pressure gradient conditions
226	! topography_grid_convention moved from user_check_parameters
227	! 'single_street_canyon'
228	! Added shf* and qsws* to the list of available output data
229	!
230	! 222 2009-01-12 16:04:16Z letzel
231	! +user_check_parameters
232	! Output of messages replaced by message handling routine.
233	! Implementation of an MPI-1 coupling: replaced myid with target_id,
234	! deleted __mpi2 directives
235	! Check that PALM is called with mrun -K parallel for coupling
236	!
237	! 197 2008-09-16 15:29:03Z raasch
238	! Bug fix: Construction of vertical profiles when 10 gradients have been
239	! specified in the parameter list (ug, vg, pt, q, sa, lad)
240	!
241	! Strict grid matching along z is not needed for mg-solver.
242	! Leaf area density (LAD) explicitly set to its surface value at k=0
243	! Case of reading data for recycling included in initializing_actions,
244	! check of turbulent_inflow and calculation of recycling_plane.
245	! q*2 profile added
246	!
247	! 138 2007-11-28 10:03:58Z letzel
248	! Plant canopy added
249	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
250	! Multigrid solver allows topography, checking of dt_sort_particles
251	! Bugfix: initializing u_init and v_init in case of ocean runs
252	!
253	! 109 2007-08-28 15:26:47Z letzel
254	! Check coupling_mode and set default (obligatory) values (like boundary
255	! conditions for temperature and fluxes) in case of coupled runs.
256	! +profiles for wp and w"e
257	! Bugfix: Error message concerning output of particle concentration (pc)
258	! modified
259	! More checks and more default values for coupled runs
260	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
261	! cloud_physics = .T.)
262	! Rayleigh damping for ocean fixed.
263	! Check and, if necessary, set default value for dt_coupling
264	!
265	! 97 2007-06-21 08:23:15Z raasch
266	! Initial salinity profile is calculated, salinity boundary conditions are
267	! checked,
268	! z_max_do1d is checked only in case of ocean = .f.,
269	! +initial temperature and geostrophic velocity profiles for the ocean version,
270	! use_pt_reference renamed use_reference
271	!
272	! 89 2007-05-25 12:08:31Z raasch
273	! Check for user-defined profiles
274	!
275	! 75 2007-03-22 09:54:05Z raasch
276	! "by_user" allowed as initializing action, -data_output_ts,
277	! leapfrog with non-flat topography not allowed any more, loop_optimization
278	! and pt_reference are checked, moisture renamed humidity,
279	! output of precipitation amount/rate and roughnes length + check
280	! possible negative humidities are avoided in initial profile,
281	! dirichlet/neumann changed to dirichlet/radiation, etc.,
282	! revision added to run_description_header
283	!
284	! 20 2007-02-26 00:12:32Z raasch
285	! Temperature and humidity gradients at top are now calculated for nzt+1,
286	! top_heatflux and respective boundary condition bc_pt_t is checked
287	!
288	! RCS Log replace by Id keyword, revision history cleaned up
289	!
290	! Revision 1.61 2006/08/04 14:20:25 raasch
291	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
292	! use_upstream_for_tke, default value for dt_dopts,
293	! generation of file header moved from routines palm and header to here
294	!
295	! Revision 1.1 1997/08/26 06:29:23 raasch
296	! Initial revision
297	!
298	!
299	! Description:
300	! ------------
301	! Check control parameters and deduce further quantities.
302	!------------------------------------------------------------------------------!
303
304	USE arrays_3d
305	USE cloud_parameters
306	USE constants
307	USE control_parameters
308	USE dvrp_variables
309	USE grid_variables
310	USE indices
311	USE model_1d
312	USE netcdf_control
313	USE particle_attributes
314	USE pegrid
315	USE profil_parameter
316	USE spectrum
317	USE statistics
318	USE subsidence_mod
319	USE statistics
320	USE transpose_indices
321
322	IMPLICIT NONE
323
324	CHARACTER (LEN=1) :: sq
325	CHARACTER (LEN=6) :: var
326	CHARACTER (LEN=7) :: unit
327	CHARACTER (LEN=8) :: date
328	CHARACTER (LEN=10) :: time
329	CHARACTER (LEN=40) :: coupling_string
330	CHARACTER (LEN=100) :: action
331
332	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
333	LOGICAL :: found, ldum
334	REAL :: gradient, remote = 0.0, simulation_time_since_reference
335
336	!
337	!-- Check for overlap combinations, which are not realized yet
338	IF ( transpose_compute_overlap ) THEN
339	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
340	#if defined( __openacc )
341	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
342	#endif
343	ENDIF
344
345	!
346	!-- Warning, if host is not set
347	IF ( host(1:1) == ' ' ) THEN
348	message_string = '"host" is not set. Please check that environment ' // &
349	'variable "localhost" & is set before running PALM'
350	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
351	ENDIF
352
353	!
354	!-- Check the coupling mode
355	IF ( coupling_mode /= 'uncoupled' .AND. &
356	coupling_mode /= 'atmosphere_to_ocean' .AND. &
357	coupling_mode /= 'ocean_to_atmosphere' ) THEN
358	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
359	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
360	ENDIF
361
362	!
363	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
364	IF ( coupling_mode /= 'uncoupled') THEN
365
366	IF ( dt_coupling == 9999999.9 ) THEN
367	message_string = 'dt_coupling is not set but required for coup' // &
368	'ling mode "' // TRIM( coupling_mode ) // '"'
369	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
370	ENDIF
371
372	#if defined( __parallel )
373
374	!
375	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
376	!-- program.
377	!-- check_namelist_files will need the following information of the other
378	!-- model (atmosphere/ocean).
379	! dt_coupling = remote
380	! dt_max = remote
381	! restart_time = remote
382	! dt_restart= remote
383	! simulation_time_since_reference = remote
384	! dx = remote
385
386
387	#if ! defined( __check )
388	IF ( myid == 0 ) THEN
389	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
390	ierr )
391	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
392	status, ierr )
393	ENDIF
394	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
395	#endif
396	IF ( dt_coupling /= remote ) THEN
397	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
398	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
399	'dt_coupling_remote = ', remote
400	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
401	ENDIF
402	IF ( dt_coupling <= 0.0 ) THEN
403	#if ! defined( __check )
404	IF ( myid == 0 ) THEN
405	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
406	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
407	status, ierr )
408	ENDIF
409	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
410	#endif
411	dt_coupling = MAX( dt_max, remote )
412	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
413	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
414	'MAX(dt_max(A,O)) = ', dt_coupling
415	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
416	ENDIF
417	#if ! defined( __check )
418	IF ( myid == 0 ) THEN
419	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
420	ierr )
421	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
422	status, ierr )
423	ENDIF
424	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
425	#endif
426	IF ( restart_time /= remote ) THEN
427	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
428	'": restart_time = ', restart_time, '& is not equal to ', &
429	'restart_time_remote = ', remote
430	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
431	ENDIF
432	#if ! defined( __check )
433	IF ( myid == 0 ) THEN
434	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
435	ierr )
436	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
437	status, ierr )
438	ENDIF
439	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
440	#endif
441	IF ( dt_restart /= remote ) THEN
442	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
443	'": dt_restart = ', dt_restart, '& is not equal to ', &
444	'dt_restart_remote = ', remote
445	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
446	ENDIF
447
448	simulation_time_since_reference = end_time - coupling_start_time
449	#if ! defined( __check )
450	IF ( myid == 0 ) THEN
451	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
452	14, comm_inter, ierr )
453	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
454	status, ierr )
455	ENDIF
456	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
457	#endif
458	IF ( simulation_time_since_reference /= remote ) THEN
459	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
460	'": simulation_time_since_reference = ', &
461	simulation_time_since_reference, '& is not equal to ', &
462	'simulation_time_since_reference_remote = ', remote
463	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
464	ENDIF
465
466	#if ! defined( __check )
467	IF ( myid == 0 ) THEN
468	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
469	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
470	status, ierr )
471	ENDIF
472	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
473
474	#endif
475	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
476
477	IF ( dx < remote ) THEN
478	WRITE( message_string, * ) 'coupling mode "', &
479	TRIM( coupling_mode ), &
480	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
481	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
482	ENDIF
483
484	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
485	WRITE( message_string, * ) 'coupling mode "', &
486	TRIM( coupling_mode ), &
487	'": Domain size in x-direction is not equal in ocean and atmosphere'
488	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
489	ENDIF
490
491	ENDIF
492
493	#if ! defined( __check )
494	IF ( myid == 0) THEN
495	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
496	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
497	status, ierr )
498	ENDIF
499	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
500	#endif
501	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
502
503	IF ( dy < remote ) THEN
504	WRITE( message_string, * ) 'coupling mode "', &
505	TRIM( coupling_mode ), &
506	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
507	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
508	ENDIF
509
510	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
511	WRITE( message_string, * ) 'coupling mode "', &
512	TRIM( coupling_mode ), &
513	'": Domain size in y-direction is not equal in ocean and atmosphere'
514	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
515	ENDIF
516
517	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
518	WRITE( message_string, * ) 'coupling mode "', &
519	TRIM( coupling_mode ), &
520	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
521	' atmosphere'
522	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
523	ENDIF
524
525	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
526	WRITE( message_string, * ) 'coupling mode "', &
527	TRIM( coupling_mode ), &
528	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
529	' atmosphere'
530	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
531	ENDIF
532
533	ENDIF
534	#else
535	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
536	' ''mrun -K parallel'''
537	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
538	#endif
539	ENDIF
540
541	#if defined( __parallel ) && ! defined ( __check )
542	!
543	!-- Exchange via intercommunicator
544	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
545	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
546	ierr )
547	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
548	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
549	comm_inter, status, ierr )
550	ENDIF
551	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
552
553	#endif
554
555
556	!
557	!-- Generate the file header which is used as a header for most of PALM's
558	!-- output files
559	CALL DATE_AND_TIME( date, time )
560	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
561	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
562	IF ( coupling_mode == 'uncoupled' ) THEN
563	coupling_string = ''
564	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
565	coupling_string = ' coupled (atmosphere)'
566	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
567	coupling_string = ' coupled (ocean)'
568	ENDIF
569
570	WRITE ( run_description_header, &
571	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
572	TRIM( version ), TRIM( revision ), 'run: ', &
573	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
574	'host: ', TRIM( host ), run_date, run_time
575
576	!
577	!-- Check the general loop optimization method
578	IF ( loop_optimization == 'default' ) THEN
579	IF ( host(1:3) == 'nec' ) THEN
580	loop_optimization = 'vector'
581	ELSE
582	loop_optimization = 'cache'
583	ENDIF
584	ENDIF
585
586	SELECT CASE ( TRIM( loop_optimization ) )
587
588	CASE ( 'acc', 'cache', 'vector' )
589	CONTINUE
590
591	CASE DEFAULT
592	message_string = 'illegal value given for loop_optimization: "' // &
593	TRIM( loop_optimization ) // '"'
594	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
595
596	END SELECT
597
598	!
599	!-- Check if vertical grid stretching is used together with particles
600	IF ( dz_stretch_level < 100000.0 .AND. particle_advection ) THEN
601	message_string = 'Vertical grid stretching is not allowed together ' // &
602	'with particle advection.'
603	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
604	ENDIF
605
606	!
607	!-- Check topography setting (check for illegal parameter combinations)
608	IF ( topography /= 'flat' ) THEN
609	action = ' '
610	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
611	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
612	ENDIF
613	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
614	THEN
615	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
616	ENDIF
617	IF ( psolver == 'sor' ) THEN
618	WRITE( action, '(A,A)' ) 'psolver = ', psolver
619	ENDIF
620	IF ( sloping_surface ) THEN
621	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
622	ENDIF
623	IF ( galilei_transformation ) THEN
624	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
625	ENDIF
626	IF ( cloud_physics ) THEN
627	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
628	ENDIF
629	IF ( cloud_droplets ) THEN
630	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
631	ENDIF
632	IF ( .NOT. prandtl_layer ) THEN
633	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
634	ENDIF
635	IF ( action /= ' ' ) THEN
636	message_string = 'a non-flat topography does not allow ' // &
637	TRIM( action )
638	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
639	ENDIF
640	!
641	!-- In case of non-flat topography, check whether the convention how to
642	!-- define the topography grid has been set correctly, or whether the default
643	!-- is applicable. If this is not possible, abort.
644	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
645	IF ( TRIM( topography ) /= 'single_building' .AND. &
646	TRIM( topography ) /= 'single_street_canyon' .AND. &
647	TRIM( topography ) /= 'read_from_file' ) THEN
648	!-- The default value is not applicable here, because it is only valid
649	!-- for the two standard cases 'single_building' and 'read_from_file'
650	!-- defined in init_grid.
651	WRITE( message_string, * ) &
652	'The value for "topography_grid_convention" ', &
653	'is not set. Its default value is & only valid for ', &
654	'"topography" = ''single_building'', ', &
655	'''single_street_canyon'' & or ''read_from_file''.', &
656	' & Choose ''cell_edge'' or ''cell_center''.'
657	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
658	ELSE
659	!-- The default value is applicable here.
660	!-- Set convention according to topography.
661	IF ( TRIM( topography ) == 'single_building' .OR. &
662	TRIM( topography ) == 'single_street_canyon' ) THEN
663	topography_grid_convention = 'cell_edge'
664	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
665	topography_grid_convention = 'cell_center'
666	ENDIF
667	ENDIF
668	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
669	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
670	WRITE( message_string, * ) &
671	'The value for "topography_grid_convention" is ', &
672	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
673	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
674	ENDIF
675
676	ENDIF
677
678	!
679	!-- Check ocean setting
680	IF ( ocean ) THEN
681
682	action = ' '
683	IF ( action /= ' ' ) THEN
684	message_string = 'ocean = .T. does not allow ' // TRIM( action )
685	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
686	ENDIF
687
688	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
689	TRIM( coupling_char ) == '_O' ) THEN
690
691	!
692	!-- Check whether an (uncoupled) atmospheric run has been declared as an
693	!-- ocean run (this setting is done via mrun-option -y)
694
695	message_string = 'ocean = .F. does not allow coupling_char = "' // &
696	TRIM( coupling_char ) // '" set by mrun-option "-y"'
697	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
698
699	ENDIF
700	!
701	!-- Check cloud scheme
702	IF ( cloud_scheme == 'seifert_beheng' ) THEN
703	icloud_scheme = 0
704	ELSEIF ( cloud_scheme == 'kessler' ) THEN
705	icloud_scheme = 1
706	ELSE
707	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
708	TRIM( cloud_scheme ) // '"'
709	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
710	ENDIF
711	!
712	!-- Check whether there are any illegal values
713	!-- Pressure solver:
714	IF ( psolver /= 'poisfft' .AND. &
715	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
716	message_string = 'unknown solver for perturbation pressure: psolver' // &
717	' = "' // TRIM( psolver ) // '"'
718	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
719	ENDIF
720
721	IF ( psolver == 'multigrid' ) THEN
722	IF ( cycle_mg == 'w' ) THEN
723	gamma_mg = 2
724	ELSEIF ( cycle_mg == 'v' ) THEN
725	gamma_mg = 1
726	ELSE
727	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
728	TRIM( cycle_mg ) // '"'
729	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
730	ENDIF
731	ENDIF
732
733	IF ( fft_method /= 'singleton-algorithm' .AND. &
734	fft_method /= 'temperton-algorithm' .AND. &
735	fft_method /= 'fftw' .AND. &
736	fft_method /= 'system-specific' ) THEN
737	message_string = 'unknown fft-algorithm: fft_method = "' // &
738	TRIM( fft_method ) // '"'
739	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
740	ENDIF
741
742	IF( momentum_advec == 'ws-scheme' .AND. &
743	.NOT. call_psolver_at_all_substeps ) THEN
744	message_string = 'psolver must be called at each RK3 substep when "'//&
745	TRIM(momentum_advec) // ' "is used for momentum_advec'
746	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
747	END IF
748	!
749	!-- Advection schemes:
750	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
751	THEN
752	message_string = 'unknown advection scheme: momentum_advec = "' // &
753	TRIM( momentum_advec ) // '"'
754	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
755	ENDIF
756	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
757	.AND. ( timestep_scheme == 'euler' .OR. &
758	timestep_scheme == 'runge-kutta-2' ) ) &
759	THEN
760	message_string = 'momentum_advec or scalar_advec = "' &
761	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
762	TRIM( timestep_scheme ) // '"'
763	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
764	ENDIF
765	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
766	scalar_advec /= 'bc-scheme' ) &
767	THEN
768	message_string = 'unknown advection scheme: scalar_advec = "' // &
769	TRIM( scalar_advec ) // '"'
770	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
771	ENDIF
772	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
773	THEN
774	message_string = 'advection_scheme scalar_advec = "' &
775	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
776	TRIM( loop_optimization ) // '"'
777	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
778	ENDIF
779
780	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
781	use_upstream_for_tke = .TRUE.
782	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
783	'use_sgs_for_particles = .TRUE.'
784	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
785	ENDIF
786
787	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
788	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
789	'curvature_solution_effects = .TRUE.'
790	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
791	ENDIF
792
793	!
794	!-- Set LOGICAL switches to enhance performance
795	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
796	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
797
798	!
799	!-- Timestep schemes:
800	SELECT CASE ( TRIM( timestep_scheme ) )
801
802	CASE ( 'euler' )
803	intermediate_timestep_count_max = 1
804
805	CASE ( 'runge-kutta-2' )
806	intermediate_timestep_count_max = 2
807
808	CASE ( 'runge-kutta-3' )
809	intermediate_timestep_count_max = 3
810
811	CASE DEFAULT
812	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
813	TRIM( timestep_scheme ) // '"'
814	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
815
816	END SELECT
817
818	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
819	.AND. timestep_scheme(1:5) == 'runge' ) THEN
820	message_string = 'momentum advection scheme "' // &
821	TRIM( momentum_advec ) // '" & does not work with ' // &
822	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
823	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
824	ENDIF
825
826	!
827	!-- Collision kernels:
828	SELECT CASE ( TRIM( collision_kernel ) )
829
830	CASE ( 'hall', 'hall_fast' )
831	hall_kernel = .TRUE.
832
833	CASE ( 'palm' )
834	palm_kernel = .TRUE.
835
836	CASE ( 'wang', 'wang_fast' )
837	wang_kernel = .TRUE.
838
839	CASE ( 'none' )
840
841
842	CASE DEFAULT
843	message_string = 'unknown collision kernel: collision_kernel = "' // &
844	TRIM( collision_kernel ) // '"'
845	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
846
847	END SELECT
848	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
849
850	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
851	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
852	!
853	!-- No restart run: several initialising actions are possible
854	action = initializing_actions
855	DO WHILE ( TRIM( action ) /= '' )
856	position = INDEX( action, ' ' )
857	SELECT CASE ( action(1:position-1) )
858
859	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
860	'by_user', 'initialize_vortex', 'initialize_ptanom' )
861	action = action(position+1:)
862
863	CASE DEFAULT
864	message_string = 'initializing_action = "' // &
865	TRIM( action ) // '" unkown or not allowed'
866	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
867
868	END SELECT
869	ENDDO
870	ENDIF
871
872	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
873	conserve_volume_flow ) THEN
874	message_string = 'initializing_actions = "initialize_vortex"' // &
875	' ist not allowed with conserve_volume_flow = .T.'
876	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
877	ENDIF
878
879
880	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
881	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
882	message_string = 'initializing_actions = "set_constant_profiles"' // &
883	' and "set_1d-model_profiles" are not allowed ' // &
884	'simultaneously'
885	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
886	ENDIF
887
888	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
889	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
890	message_string = 'initializing_actions = "set_constant_profiles"' // &
891	' and "by_user" are not allowed simultaneously'
892	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
893	ENDIF
894
895	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
896	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
897	message_string = 'initializing_actions = "by_user" and ' // &
898	'"set_1d-model_profiles" are not allowed simultaneously'
899	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
900	ENDIF
901
902	IF ( cloud_physics .AND. .NOT. humidity ) THEN
903	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
904	'not allowed with humidity = ', humidity
905	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
906	ENDIF
907
908	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
909	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
910	'not allowed with cloud_physics = ', cloud_physics
911	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
912	ENDIF
913
914	IF ( humidity .AND. sloping_surface ) THEN
915	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
916	'are not allowed simultaneously'
917	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
918	ENDIF
919
920	IF ( passive_scalar .AND. humidity ) THEN
921	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
922	'is not allowed simultaneously'
923	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
924	ENDIF
925
926	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
927	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
928	'coefficient & given value is drag_coefficient = 0.0'
929	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
930	ENDIF
931
932	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
933	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
934	' seifert_beheng'
935	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
936	ENDIF
937
938	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
939	icloud_scheme == 0 ) THEN
940	message_string = 'cloud_scheme = seifert_beheng requires ' // &
941	'loop_optimization = cache'
942	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
943	ENDIF
944
945	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
946	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
947	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
948	! 'precipitation = .TRUE. or drizzle = .TRUE.'
949	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
950	! ENDIF
951
952	!
953	!-- In case of no model continuation run, check initialising parameters and
954	!-- deduce further quantities
955	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
956
957	!
958	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
959	pt_init = pt_surface
960	IF ( humidity ) THEN
961	q_init = q_surface
962	ENDIF
963	IF ( ocean ) sa_init = sa_surface
964	IF ( passive_scalar ) q_init = s_surface
965	IF ( plant_canopy ) lad = 0.0
966
967	!
968	!--
969	!-- If required, compute initial profile of the geostrophic wind
970	!-- (component ug)
971	i = 1
972	gradient = 0.0
973
974	IF ( .NOT. ocean ) THEN
975
976	ug_vertical_gradient_level_ind(1) = 0
977	ug(0) = ug_surface
978	DO k = 1, nzt+1
979	IF ( i < 11 ) THEN
980	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
981	ug_vertical_gradient_level(i) >= 0.0 ) THEN
982	gradient = ug_vertical_gradient(i) / 100.0
983	ug_vertical_gradient_level_ind(i) = k - 1
984	i = i + 1
985	ENDIF
986	ENDIF
987	IF ( gradient /= 0.0 ) THEN
988	IF ( k /= 1 ) THEN
989	ug(k) = ug(k-1) + dzu(k) * gradient
990	ELSE
991	ug(k) = ug_surface + dzu(k) * gradient
992	ENDIF
993	ELSE
994	ug(k) = ug(k-1)
995	ENDIF
996	ENDDO
997
998	ELSE
999
1000	ug_vertical_gradient_level_ind(1) = nzt+1
1001	ug(nzt+1) = ug_surface
1002	DO k = nzt, nzb, -1
1003	IF ( i < 11 ) THEN
1004	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
1005	ug_vertical_gradient_level(i) <= 0.0 ) THEN
1006	gradient = ug_vertical_gradient(i) / 100.0
1007	ug_vertical_gradient_level_ind(i) = k + 1
1008	i = i + 1
1009	ENDIF
1010	ENDIF
1011	IF ( gradient /= 0.0 ) THEN
1012	IF ( k /= nzt ) THEN
1013	ug(k) = ug(k+1) - dzu(k+1) * gradient
1014	ELSE
1015	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
1016	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
1017	ENDIF
1018	ELSE
1019	ug(k) = ug(k+1)
1020	ENDIF
1021	ENDDO
1022
1023	ENDIF
1024
1025	!
1026	!-- In case of no given gradients for ug, choose a zero gradient
1027	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
1028	ug_vertical_gradient_level(1) = 0.0
1029	ENDIF
1030
1031	!
1032	!--
1033	!-- If required, compute initial profile of the geostrophic wind
1034	!-- (component vg)
1035	i = 1
1036	gradient = 0.0
1037
1038	IF ( .NOT. ocean ) THEN
1039
1040	vg_vertical_gradient_level_ind(1) = 0
1041	vg(0) = vg_surface
1042	DO k = 1, nzt+1
1043	IF ( i < 11 ) THEN
1044	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1045	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1046	gradient = vg_vertical_gradient(i) / 100.0
1047	vg_vertical_gradient_level_ind(i) = k - 1
1048	i = i + 1
1049	ENDIF
1050	ENDIF
1051	IF ( gradient /= 0.0 ) THEN
1052	IF ( k /= 1 ) THEN
1053	vg(k) = vg(k-1) + dzu(k) * gradient
1054	ELSE
1055	vg(k) = vg_surface + dzu(k) * gradient
1056	ENDIF
1057	ELSE
1058	vg(k) = vg(k-1)
1059	ENDIF
1060	ENDDO
1061
1062	ELSE
1063
1064	vg_vertical_gradient_level_ind(1) = nzt+1
1065	vg(nzt+1) = vg_surface
1066	DO k = nzt, nzb, -1
1067	IF ( i < 11 ) THEN
1068	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1069	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1070	gradient = vg_vertical_gradient(i) / 100.0
1071	vg_vertical_gradient_level_ind(i) = k + 1
1072	i = i + 1
1073	ENDIF
1074	ENDIF
1075	IF ( gradient /= 0.0 ) THEN
1076	IF ( k /= nzt ) THEN
1077	vg(k) = vg(k+1) - dzu(k+1) * gradient
1078	ELSE
1079	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1080	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1081	ENDIF
1082	ELSE
1083	vg(k) = vg(k+1)
1084	ENDIF
1085	ENDDO
1086
1087	ENDIF
1088
1089	!
1090	!-- In case of no given gradients for vg, choose a zero gradient
1091	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1092	vg_vertical_gradient_level(1) = 0.0
1093	ENDIF
1094
1095	!
1096	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1097	!-- interpolate them from wind profile data (if given)
1098	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1099
1100	u_init = ug
1101	v_init = vg
1102
1103	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1104
1105	IF ( uv_heights(1) /= 0.0 ) THEN
1106	message_string = 'uv_heights(1) must be 0.0'
1107	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1108	ENDIF
1109
1110	use_prescribed_profile_data = .TRUE.
1111
1112	kk = 1
1113	u_init(0) = 0.0
1114	v_init(0) = 0.0
1115
1116	DO k = 1, nz+1
1117
1118	IF ( kk < 100 ) THEN
1119	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1120	kk = kk + 1
1121	IF ( kk == 100 ) EXIT
1122	ENDDO
1123	ENDIF
1124
1125	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1126	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1127	( uv_heights(kk+1) - uv_heights(kk) ) * &
1128	( u_profile(kk+1) - u_profile(kk) )
1129	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1130	( uv_heights(kk+1) - uv_heights(kk) ) * &
1131	( v_profile(kk+1) - v_profile(kk) )
1132	ELSE
1133	u_init(k) = u_profile(kk)
1134	v_init(k) = v_profile(kk)
1135	ENDIF
1136
1137	ENDDO
1138
1139	ELSE
1140
1141	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1142	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1143
1144	ENDIF
1145
1146	!
1147	!-- Compute initial temperature profile using the given temperature gradients
1148	IF ( .NOT. neutral ) THEN
1149
1150	i = 1
1151	gradient = 0.0
1152
1153	IF ( .NOT. ocean ) THEN
1154
1155	pt_vertical_gradient_level_ind(1) = 0
1156	DO k = 1, nzt+1
1157	IF ( i < 11 ) THEN
1158	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1159	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1160	gradient = pt_vertical_gradient(i) / 100.0
1161	pt_vertical_gradient_level_ind(i) = k - 1
1162	i = i + 1
1163	ENDIF
1164	ENDIF
1165	IF ( gradient /= 0.0 ) THEN
1166	IF ( k /= 1 ) THEN
1167	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1168	ELSE
1169	pt_init(k) = pt_surface + dzu(k) * gradient
1170	ENDIF
1171	ELSE
1172	pt_init(k) = pt_init(k-1)
1173	ENDIF
1174	ENDDO
1175
1176	ELSE
1177
1178	pt_vertical_gradient_level_ind(1) = nzt+1
1179	DO k = nzt, 0, -1
1180	IF ( i < 11 ) THEN
1181	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1182	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1183	gradient = pt_vertical_gradient(i) / 100.0
1184	pt_vertical_gradient_level_ind(i) = k + 1
1185	i = i + 1
1186	ENDIF
1187	ENDIF
1188	IF ( gradient /= 0.0 ) THEN
1189	IF ( k /= nzt ) THEN
1190	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1191	ELSE
1192	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1193	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1194	ENDIF
1195	ELSE
1196	pt_init(k) = pt_init(k+1)
1197	ENDIF
1198	ENDDO
1199
1200	ENDIF
1201
1202	ENDIF
1203
1204	!
1205	!-- In case of no given temperature gradients, choose gradient of neutral
1206	!-- stratification
1207	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1208	pt_vertical_gradient_level(1) = 0.0
1209	ENDIF
1210
1211	!
1212	!-- Store temperature gradient at the top boundary for possible Neumann
1213	!-- boundary condition
1214	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1215
1216	!
1217	!-- If required, compute initial humidity or scalar profile using the given
1218	!-- humidity/scalar gradient. In case of scalar transport, initially store
1219	!-- values of the scalar parameters on humidity parameters
1220	IF ( passive_scalar ) THEN
1221	bc_q_b = bc_s_b
1222	bc_q_t = bc_s_t
1223	q_surface = s_surface
1224	q_surface_initial_change = s_surface_initial_change
1225	q_vertical_gradient = s_vertical_gradient
1226	q_vertical_gradient_level = s_vertical_gradient_level
1227	surface_waterflux = surface_scalarflux
1228	wall_humidityflux = wall_scalarflux
1229	ENDIF
1230
1231	IF ( humidity .OR. passive_scalar ) THEN
1232
1233	i = 1
1234	gradient = 0.0
1235	q_vertical_gradient_level_ind(1) = 0
1236	DO k = 1, nzt+1
1237	IF ( i < 11 ) THEN
1238	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1239	q_vertical_gradient_level(i) >= 0.0 ) THEN
1240	gradient = q_vertical_gradient(i) / 100.0
1241	q_vertical_gradient_level_ind(i) = k - 1
1242	i = i + 1
1243	ENDIF
1244	ENDIF
1245	IF ( gradient /= 0.0 ) THEN
1246	IF ( k /= 1 ) THEN
1247	q_init(k) = q_init(k-1) + dzu(k) * gradient
1248	ELSE
1249	q_init(k) = q_init(k-1) + dzu(k) * gradient
1250	ENDIF
1251	ELSE
1252	q_init(k) = q_init(k-1)
1253	ENDIF
1254	!
1255	!-- Avoid negative humidities
1256	IF ( q_init(k) < 0.0 ) THEN
1257	q_init(k) = 0.0
1258	ENDIF
1259	ENDDO
1260
1261	!
1262	!-- In case of no given humidity gradients, choose zero gradient
1263	!-- conditions
1264	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1265	q_vertical_gradient_level(1) = 0.0
1266	ENDIF
1267	!
1268	!-- Store humidity, rain water content and rain drop concentration
1269	!-- gradient at the top boundary for possile Neumann boundary condition
1270	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1271	ENDIF
1272
1273	!
1274	!-- If required, compute initial salinity profile using the given salinity
1275	!-- gradients
1276	IF ( ocean ) THEN
1277
1278	i = 1
1279	gradient = 0.0
1280
1281	sa_vertical_gradient_level_ind(1) = nzt+1
1282	DO k = nzt, 0, -1
1283	IF ( i < 11 ) THEN
1284	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1285	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1286	gradient = sa_vertical_gradient(i) / 100.0
1287	sa_vertical_gradient_level_ind(i) = k + 1
1288	i = i + 1
1289	ENDIF
1290	ENDIF
1291	IF ( gradient /= 0.0 ) THEN
1292	IF ( k /= nzt ) THEN
1293	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1294	ELSE
1295	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1296	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1297	ENDIF
1298	ELSE
1299	sa_init(k) = sa_init(k+1)
1300	ENDIF
1301	ENDDO
1302
1303	ENDIF
1304
1305	!
1306	!-- If required compute the profile of leaf area density used in the plant
1307	!-- canopy model
1308	IF ( plant_canopy ) THEN
1309
1310	i = 1
1311	gradient = 0.0
1312
1313	IF ( .NOT. ocean ) THEN
1314
1315	lad(0) = lad_surface
1316
1317	lad_vertical_gradient_level_ind(1) = 0
1318	DO k = 1, pch_index
1319	IF ( i < 11 ) THEN
1320	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1321	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1322	gradient = lad_vertical_gradient(i)
1323	lad_vertical_gradient_level_ind(i) = k - 1
1324	i = i + 1
1325	ENDIF
1326	ENDIF
1327	IF ( gradient /= 0.0 ) THEN
1328	IF ( k /= 1 ) THEN
1329	lad(k) = lad(k-1) + dzu(k) * gradient
1330	ELSE
1331	lad(k) = lad_surface + dzu(k) *gradient
1332	ENDIF
1333	ELSE
1334	lad(k) = lad(k-1)
1335	ENDIF
1336	ENDDO
1337
1338	ENDIF
1339
1340	!
1341	!-- In case of no given leaf area density gradients, choose a vanishing
1342	!-- gradient
1343	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1344	lad_vertical_gradient_level(1) = 0.0
1345	ENDIF
1346
1347	ENDIF
1348
1349	ENDIF
1350
1351	!
1352	!-- Initialize large scale subsidence if required
1353	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1354	large_scale_subsidence = .TRUE.
1355	CALL init_w_subsidence
1356	ENDIF
1357
1358	!
1359	!-- Compute Coriolis parameter
1360	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1361	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1362
1363	!
1364	!-- Check and set buoyancy related parameters and switches
1365	IF ( reference_state == 'horizontal_average' ) THEN
1366	CONTINUE
1367	ELSEIF ( reference_state == 'initial_profile' ) THEN
1368	use_initial_profile_as_reference = .TRUE.
1369	ELSEIF ( reference_state == 'single_value' ) THEN
1370	use_single_reference_value = .TRUE.
1371	IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface
1372	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
1373	ELSE
1374	message_string = 'illegal value for reference_state: "' // &
1375	TRIM( reference_state ) // '"'
1376	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1377	ENDIF
1378
1379	!
1380	!-- Ocean runs always use reference values in the buoyancy term
1381	IF ( ocean ) THEN
1382	reference_state = 'single_value'
1383	use_single_reference_value = .TRUE.
1384	ENDIF
1385
1386	!
1387	!-- Sign of buoyancy/stability terms
1388	IF ( ocean ) atmos_ocean_sign = -1.0
1389
1390	!
1391	!-- Ocean version must use flux boundary conditions at the top
1392	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1393	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1394	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1395	ENDIF
1396
1397	!
1398	!-- In case of a given slope, compute the relevant quantities
1399	IF ( alpha_surface /= 0.0 ) THEN
1400	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1401	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1402	' ) must be < 90.0'
1403	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1404	ENDIF
1405	sloping_surface = .TRUE.
1406	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1407	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1408	ENDIF
1409
1410	!
1411	!-- Check time step and cfl_factor
1412	IF ( dt /= -1.0 ) THEN
1413	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1414	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1415	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1416	ENDIF
1417	dt_3d = dt
1418	dt_fixed = .TRUE.
1419	ENDIF
1420
1421	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1422	IF ( cfl_factor == -1.0 ) THEN
1423	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1424	cfl_factor = 0.8
1425	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1426	cfl_factor = 0.9
1427	ELSE
1428	cfl_factor = 0.9
1429	ENDIF
1430	ELSE
1431	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1432	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1433	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1434	ENDIF
1435	ENDIF
1436
1437	!
1438	!-- Store simulated time at begin
1439	simulated_time_at_begin = simulated_time
1440
1441	!
1442	!-- Store reference time for coupled runs and change the coupling flag,
1443	!-- if ...
1444	IF ( simulated_time == 0.0 ) THEN
1445	IF ( coupling_start_time == 0.0 ) THEN
1446	time_since_reference_point = 0.0
1447	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1448	run_coupled = .FALSE.
1449	ENDIF
1450	ENDIF
1451
1452	!
1453	!-- Set wind speed in the Galilei-transformed system
1454	IF ( galilei_transformation ) THEN
1455	IF ( use_ug_for_galilei_tr .AND. &
1456	ug_vertical_gradient_level(1) == 0.0 .AND. &
1457	ug_vertical_gradient(1) == 0.0 .AND. &
1458	vg_vertical_gradient_level(1) == 0.0 .AND. &
1459	vg_vertical_gradient(1) == 0.0 ) THEN
1460	u_gtrans = ug_surface * 0.6
1461	v_gtrans = vg_surface * 0.6
1462	ELSEIF ( use_ug_for_galilei_tr .AND. &
1463	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1464	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1465	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1466	' with galilei transformation'
1467	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1468	ELSEIF ( use_ug_for_galilei_tr .AND. &
1469	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1470	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1471	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1472	' with galilei transformation'
1473	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1474	ELSE
1475	message_string = 'variable translation speed used for galilei-' // &
1476	'transformation, which may cause & instabilities in stably ' // &
1477	'stratified regions'
1478	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1479	ENDIF
1480	ENDIF
1481
1482	!
1483	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1484	!-- fluxes have to be used in the diffusion-terms
1485	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1486
1487	!
1488	!-- Check boundary conditions and set internal variables:
1489	!-- Lateral boundary conditions
1490	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1491	bc_lr /= 'radiation/dirichlet' ) THEN
1492	message_string = 'unknown boundary condition: bc_lr = "' // &
1493	TRIM( bc_lr ) // '"'
1494	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1495	ENDIF
1496	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1497	bc_ns /= 'radiation/dirichlet' ) THEN
1498	message_string = 'unknown boundary condition: bc_ns = "' // &
1499	TRIM( bc_ns ) // '"'
1500	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1501	ENDIF
1502
1503	!
1504	!-- Internal variables used for speed optimization in if clauses
1505	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1506	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1507	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1508	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1509	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1510	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1511
1512	!
1513	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1514	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1515	!-- and tools do not work with non-cyclic boundary conditions.
1516	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1517	IF ( psolver /= 'multigrid' ) THEN
1518	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1519	'psolver = "' // TRIM( psolver ) // '"'
1520	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1521	ENDIF
1522	IF ( momentum_advec /= 'pw-scheme' .AND. &
1523	momentum_advec /= 'ws-scheme') THEN
1524	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1525	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1526	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1527	ENDIF
1528	IF ( scalar_advec /= 'pw-scheme' .AND. &
1529	scalar_advec /= 'ws-scheme' ) THEN
1530	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1531	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1532	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1533	ENDIF
1534	IF ( galilei_transformation ) THEN
1535	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1536	'galilei_transformation = .T.'
1537	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1538	ENDIF
1539	ENDIF
1540
1541	!
1542	!-- Bottom boundary condition for the turbulent Kinetic energy
1543	IF ( bc_e_b == 'neumann' ) THEN
1544	ibc_e_b = 1
1545	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1546	ibc_e_b = 2
1547	IF ( prandtl_layer ) THEN
1548	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1549	TRIM( bc_e_b ) // '"'
1550	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1551	ENDIF
1552	IF ( .NOT. prandtl_layer ) THEN
1553	bc_e_b = 'neumann'
1554	ibc_e_b = 1
1555	message_string = 'boundary condition bc_e_b changed to "' // &
1556	TRIM( bc_e_b ) // '"'
1557	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1558	ENDIF
1559	ELSE
1560	message_string = 'unknown boundary condition: bc_e_b = "' // &
1561	TRIM( bc_e_b ) // '"'
1562	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1563	ENDIF
1564
1565	!
1566	!-- Boundary conditions for perturbation pressure
1567	IF ( bc_p_b == 'dirichlet' ) THEN
1568	ibc_p_b = 0
1569	ELSEIF ( bc_p_b == 'neumann' ) THEN
1570	ibc_p_b = 1
1571	ELSE
1572	message_string = 'unknown boundary condition: bc_p_b = "' // &
1573	TRIM( bc_p_b ) // '"'
1574	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1575	ENDIF
1576
1577	IF ( bc_p_t == 'dirichlet' ) THEN
1578	ibc_p_t = 0
1579	ELSEIF ( bc_p_t == 'neumann' ) THEN
1580	ibc_p_t = 1
1581	ELSE
1582	message_string = 'unknown boundary condition: bc_p_t = "' // &
1583	TRIM( bc_p_t ) // '"'
1584	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1585	ENDIF
1586
1587	!
1588	!-- Boundary conditions for potential temperature
1589	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1590	ibc_pt_b = 2
1591	ELSE
1592	IF ( bc_pt_b == 'dirichlet' ) THEN
1593	ibc_pt_b = 0
1594	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1595	ibc_pt_b = 1
1596	ELSE
1597	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1598	TRIM( bc_pt_b ) // '"'
1599	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1600	ENDIF
1601	ENDIF
1602
1603	IF ( bc_pt_t == 'dirichlet' ) THEN
1604	ibc_pt_t = 0
1605	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1606	ibc_pt_t = 1
1607	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1608	ibc_pt_t = 2
1609	ELSE
1610	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1611	TRIM( bc_pt_t ) // '"'
1612	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1613	ENDIF
1614
1615	IF ( surface_heatflux == 9999999.9 .AND. .NOT. large_scale_forcing ) THEN
1616	constant_heatflux = .FALSE.
1617	ELSE
1618	constant_heatflux = .TRUE.
1619	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1620	large_scale_forcing ) THEN
1621	surface_heatflux = shf_surf(1)
1622	ENDIF
1623	ENDIF
1624
1625	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1626
1627	IF ( neutral ) THEN
1628
1629	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1630	THEN
1631	message_string = 'heatflux must not be set for pure neutral flow'
1632	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1633	ENDIF
1634
1635	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1636	THEN
1637	message_string = 'heatflux must not be set for pure neutral flow'
1638	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1639	ENDIF
1640
1641	ENDIF
1642
1643	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1644	top_momentumflux_v /= 9999999.9 ) THEN
1645	constant_top_momentumflux = .TRUE.
1646	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1647	top_momentumflux_v == 9999999.9 ) ) THEN
1648	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1649	'must be set'
1650	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1651	ENDIF
1652
1653	!
1654	!-- A given surface temperature implies Dirichlet boundary condition for
1655	!-- temperature. In this case specification of a constant heat flux is
1656	!-- forbidden.
1657	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1658	surface_heatflux /= 0.0 ) THEN
1659	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1660	'& is not allowed with constant_heatflux = .TRUE.'
1661	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1662	ENDIF
1663	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1664	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1665	'wed with pt_surface_initial_change (/=0) = ', &
1666	pt_surface_initial_change
1667	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1668	ENDIF
1669
1670	!
1671	!-- A given temperature at the top implies Dirichlet boundary condition for
1672	!-- temperature. In this case specification of a constant heat flux is
1673	!-- forbidden.
1674	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1675	top_heatflux /= 0.0 ) THEN
1676	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1677	'" is not allowed with constant_top_heatflux = .TRUE.'
1678	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1679	ENDIF
1680
1681	!
1682	!-- Boundary conditions for salinity
1683	IF ( ocean ) THEN
1684	IF ( bc_sa_t == 'dirichlet' ) THEN
1685	ibc_sa_t = 0
1686	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1687	ibc_sa_t = 1
1688	ELSE
1689	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1690	TRIM( bc_sa_t ) // '"'
1691	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1692	ENDIF
1693
1694	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1695	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1696	message_string = 'boundary condition: bc_sa_t = "' // &
1697	TRIM( bc_sa_t ) // '" requires to set ' // &
1698	'top_salinityflux'
1699	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1700	ENDIF
1701
1702	!
1703	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1704	!-- salinity. In this case specification of a constant salinity flux is
1705	!-- forbidden.
1706	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1707	top_salinityflux /= 0.0 ) THEN
1708	message_string = 'boundary condition: bc_sa_t = "' // &
1709	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1710	'constant_top_salinityflux = .TRUE.'
1711	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1712	ENDIF
1713
1714	ENDIF
1715
1716	!
1717	!-- In case of humidity or passive scalar, set boundary conditions for total
1718	!-- water content / scalar
1719	IF ( humidity .OR. passive_scalar ) THEN
1720	IF ( humidity ) THEN
1721	sq = 'q'
1722	ELSE
1723	sq = 's'
1724	ENDIF
1725	IF ( bc_q_b == 'dirichlet' ) THEN
1726	ibc_q_b = 0
1727	ELSEIF ( bc_q_b == 'neumann' ) THEN
1728	ibc_q_b = 1
1729	ELSE
1730	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1731	'_b ="' // TRIM( bc_q_b ) // '"'
1732	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1733	ENDIF
1734	IF ( bc_q_t == 'dirichlet' ) THEN
1735	ibc_q_t = 0
1736	ELSEIF ( bc_q_t == 'neumann' ) THEN
1737	ibc_q_t = 1
1738	ELSE
1739	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1740	'_t ="' // TRIM( bc_q_t ) // '"'
1741	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1742	ENDIF
1743
1744	IF ( surface_waterflux == 9999999.9 .AND. &
1745	.NOT. large_scale_forcing ) THEN
1746	constant_waterflux = .FALSE.
1747	ELSE
1748	constant_waterflux = .TRUE.
1749	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1750	large_scale_forcing ) THEN
1751	surface_waterflux = qsws_surf(1)
1752	ENDIF
1753	ENDIF
1754
1755	!
1756	!-- A given surface humidity implies Dirichlet boundary condition for
1757	!-- humidity. In this case specification of a constant water flux is
1758	!-- forbidden.
1759	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1760	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1761	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1762	'th prescribed surface flux'
1763	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1764	ENDIF
1765	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1766	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1767	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1768	q_surface_initial_change
1769	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1770	ENDIF
1771
1772	ENDIF
1773	!
1774	!-- Boundary conditions for horizontal components of wind speed
1775	IF ( bc_uv_b == 'dirichlet' ) THEN
1776	ibc_uv_b = 0
1777	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1778	ibc_uv_b = 1
1779	IF ( prandtl_layer ) THEN
1780	message_string = 'boundary condition: bc_uv_b = "' // &
1781	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1782	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1783	ENDIF
1784	ELSE
1785	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1786	TRIM( bc_uv_b ) // '"'
1787	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1788	ENDIF
1789	!
1790	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1791	!-- assigned with the u and v values of the ocean surface
1792	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1793	ibc_uv_b = 2
1794	ENDIF
1795
1796	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1797	bc_uv_t = 'neumann'
1798	ibc_uv_t = 1
1799	ELSE
1800	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1801	ibc_uv_t = 0
1802	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1803	!
1804	!-- Velocities for the initial u,v-profiles are set zero at the top
1805	!-- in case of dirichlet_0 conditions
1806	u_init(nzt+1) = 0.0
1807	v_init(nzt+1) = 0.0
1808	ENDIF
1809	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1810	ibc_uv_t = 1
1811	ELSE
1812	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1813	TRIM( bc_uv_t ) // '"'
1814	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1815	ENDIF
1816	ENDIF
1817
1818	!
1819	!-- Compute and check, respectively, the Rayleigh Damping parameter
1820	IF ( rayleigh_damping_factor == -1.0 ) THEN
1821	rayleigh_damping_factor = 0.0
1822	ELSE
1823	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1824	THEN
1825	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1826	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1827	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1828	ENDIF
1829	ENDIF
1830
1831	IF ( rayleigh_damping_height == -1.0 ) THEN
1832	IF ( .NOT. ocean ) THEN
1833	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1834	ELSE
1835	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1836	ENDIF
1837	ELSE
1838	IF ( .NOT. ocean ) THEN
1839	IF ( rayleigh_damping_height < 0.0 .OR. &
1840	rayleigh_damping_height > zu(nzt) ) THEN
1841	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1842	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1843	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1844	ENDIF
1845	ELSE
1846	IF ( rayleigh_damping_height > 0.0 .OR. &
1847	rayleigh_damping_height < zu(nzb) ) THEN
1848	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1849	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1850	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1851	ENDIF
1852	ENDIF
1853	ENDIF
1854
1855	!
1856	!-- Check number of chosen statistic regions. More than 10 regions are not
1857	!-- allowed, because so far no more than 10 corresponding output files can
1858	!-- be opened (cf. check_open)
1859	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1860	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1861	statistic_regions+1, ' but only 10 regions are allowed'
1862	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1863	ENDIF
1864	IF ( normalizing_region > statistic_regions .OR. &
1865	normalizing_region < 0) THEN
1866	WRITE ( message_string, * ) 'normalizing_region = ', &
1867	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1868	' (value of statistic_regions)'
1869	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1870	ENDIF
1871
1872	!
1873	!-- Check the interval for sorting particles.
1874	!-- Using particles as cloud droplets requires sorting after each timestep.
1875	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1876	dt_sort_particles = 0.0
1877	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1878	'_droplets = .TRUE.'
1879	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1880	ENDIF
1881
1882	!
1883	!-- Set the default intervals for data output, if necessary
1884	!-- NOTE: dt_dosp has already been set in package_parin
1885	IF ( dt_data_output /= 9999999.9 ) THEN
1886	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1887	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1888	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1889	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1890	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1891	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1892	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1893	DO mid = 1, max_masks
1894	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1895	ENDDO
1896	ENDIF
1897
1898	!
1899	!-- Set the default skip time intervals for data output, if necessary
1900	IF ( skip_time_dopr == 9999999.9 ) &
1901	skip_time_dopr = skip_time_data_output
1902	IF ( skip_time_dosp == 9999999.9 ) &
1903	skip_time_dosp = skip_time_data_output
1904	IF ( skip_time_do2d_xy == 9999999.9 ) &
1905	skip_time_do2d_xy = skip_time_data_output
1906	IF ( skip_time_do2d_xz == 9999999.9 ) &
1907	skip_time_do2d_xz = skip_time_data_output
1908	IF ( skip_time_do2d_yz == 9999999.9 ) &
1909	skip_time_do2d_yz = skip_time_data_output
1910	IF ( skip_time_do3d == 9999999.9 ) &
1911	skip_time_do3d = skip_time_data_output
1912	IF ( skip_time_data_output_av == 9999999.9 ) &
1913	skip_time_data_output_av = skip_time_data_output
1914	DO mid = 1, max_masks
1915	IF ( skip_time_domask(mid) == 9999999.9 ) &
1916	skip_time_domask(mid) = skip_time_data_output
1917	ENDDO
1918
1919	!
1920	!-- Check the average intervals (first for 3d-data, then for profiles and
1921	!-- spectra)
1922	IF ( averaging_interval > dt_data_output_av ) THEN
1923	WRITE( message_string, * ) 'averaging_interval = ', &
1924	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1925	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1926	ENDIF
1927
1928	IF ( averaging_interval_pr == 9999999.9 ) THEN
1929	averaging_interval_pr = averaging_interval
1930	ENDIF
1931
1932	IF ( averaging_interval_pr > dt_dopr ) THEN
1933	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1934	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1935	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1936	ENDIF
1937
1938	IF ( averaging_interval_sp == 9999999.9 ) THEN
1939	averaging_interval_sp = averaging_interval
1940	ENDIF
1941
1942	IF ( averaging_interval_sp > dt_dosp ) THEN
1943	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1944	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1945	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1946	ENDIF
1947
1948	!
1949	!-- Set the default interval for profiles entering the temporal average
1950	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1951	dt_averaging_input_pr = dt_averaging_input
1952	ENDIF
1953
1954	!
1955	!-- Set the default interval for the output of timeseries to a reasonable
1956	!-- value (tries to minimize the number of calls of flow_statistics)
1957	IF ( dt_dots == 9999999.9 ) THEN
1958	IF ( averaging_interval_pr == 0.0 ) THEN
1959	dt_dots = MIN( dt_run_control, dt_dopr )
1960	ELSE
1961	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1962	ENDIF
1963	ENDIF
1964
1965	!
1966	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1967	IF ( dt_averaging_input > averaging_interval ) THEN
1968	WRITE( message_string, * ) 'dt_averaging_input = ', &
1969	dt_averaging_input, ' must be <= averaging_interval = ', &
1970	averaging_interval
1971	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1972	ENDIF
1973
1974	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1975	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1976	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1977	averaging_interval_pr
1978	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1979	ENDIF
1980
1981	!
1982	!-- Set the default value for the integration interval of precipitation amount
1983	IF ( precipitation ) THEN
1984	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1985	precipitation_amount_interval = dt_do2d_xy
1986	ELSE
1987	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1988	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1989	precipitation_amount_interval, ' must not be larger than ', &
1990	'dt_do2d_xy = ', dt_do2d_xy
1991	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1992	ENDIF
1993	ENDIF
1994	ENDIF
1995
1996	!
1997	!-- Determine the number of output profiles and check whether they are
1998	!-- permissible
1999	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
2000
2001	dopr_n = dopr_n + 1
2002	i = dopr_n
2003
2004	!
2005	!-- Determine internal profile number (for hom, homs)
2006	!-- and store height levels
2007	SELECT CASE ( TRIM( data_output_pr(i) ) )
2008
2009	CASE ( 'u', '#u' )
2010	dopr_index(i) = 1
2011	dopr_unit(i) = 'm/s'
2012	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
2013	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2014	dopr_initial_index(i) = 5
2015	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
2016	data_output_pr(i) = data_output_pr(i)(2:)
2017	ENDIF
2018
2019	CASE ( 'v', '#v' )
2020	dopr_index(i) = 2
2021	dopr_unit(i) = 'm/s'
2022	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
2023	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2024	dopr_initial_index(i) = 6
2025	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
2026	data_output_pr(i) = data_output_pr(i)(2:)
2027	ENDIF
2028
2029	CASE ( 'w' )
2030	dopr_index(i) = 3
2031	dopr_unit(i) = 'm/s'
2032	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2033
2034	CASE ( 'pt', '#pt' )
2035	IF ( .NOT. cloud_physics ) THEN
2036	dopr_index(i) = 4
2037	dopr_unit(i) = 'K'
2038	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2039	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2040	dopr_initial_index(i) = 7
2041	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2042	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
2043	data_output_pr(i) = data_output_pr(i)(2:)
2044	ENDIF
2045	ELSE
2046	dopr_index(i) = 43
2047	dopr_unit(i) = 'K'
2048	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2049	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2050	dopr_initial_index(i) = 28
2051	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2052	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
2053	data_output_pr(i) = data_output_pr(i)(2:)
2054	ENDIF
2055	ENDIF
2056
2057	CASE ( 'e' )
2058	dopr_index(i) = 8
2059	dopr_unit(i) = 'm2/s2'
2060	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2061	hom(nzb,2,8,:) = 0.0
2062
2063	CASE ( 'km', '#km' )
2064	dopr_index(i) = 9
2065	dopr_unit(i) = 'm2/s'
2066	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2067	hom(nzb,2,9,:) = 0.0
2068	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2069	dopr_initial_index(i) = 23
2070	hom(:,2,23,:) = hom(:,2,9,:)
2071	data_output_pr(i) = data_output_pr(i)(2:)
2072	ENDIF
2073
2074	CASE ( 'kh', '#kh' )
2075	dopr_index(i) = 10
2076	dopr_unit(i) = 'm2/s'
2077	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2078	hom(nzb,2,10,:) = 0.0
2079	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2080	dopr_initial_index(i) = 24
2081	hom(:,2,24,:) = hom(:,2,10,:)
2082	data_output_pr(i) = data_output_pr(i)(2:)
2083	ENDIF
2084
2085	CASE ( 'l', '#l' )
2086	dopr_index(i) = 11
2087	dopr_unit(i) = 'm'
2088	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2089	hom(nzb,2,11,:) = 0.0
2090	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2091	dopr_initial_index(i) = 25
2092	hom(:,2,25,:) = hom(:,2,11,:)
2093	data_output_pr(i) = data_output_pr(i)(2:)
2094	ENDIF
2095
2096	CASE ( 'w"u"' )
2097	dopr_index(i) = 12
2098	dopr_unit(i) = 'm2/s2'
2099	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2100	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2101
2102	CASE ( 'wu' )
2103	dopr_index(i) = 13
2104	dopr_unit(i) = 'm2/s2'
2105	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2106
2107	CASE ( 'w"v"' )
2108	dopr_index(i) = 14
2109	dopr_unit(i) = 'm2/s2'
2110	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2111	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2112
2113	CASE ( 'wv' )
2114	dopr_index(i) = 15
2115	dopr_unit(i) = 'm2/s2'
2116	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2117
2118	CASE ( 'w"pt"' )
2119	dopr_index(i) = 16
2120	dopr_unit(i) = 'K m/s'
2121	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2122
2123	CASE ( 'wpt' )
2124	dopr_index(i) = 17
2125	dopr_unit(i) = 'K m/s'
2126	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2127
2128	CASE ( 'wpt' )
2129	dopr_index(i) = 18
2130	dopr_unit(i) = 'K m/s'
2131	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2132
2133	CASE ( 'wu' )
2134	dopr_index(i) = 19
2135	dopr_unit(i) = 'm2/s2'
2136	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2137	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2138
2139	CASE ( 'wv' )
2140	dopr_index(i) = 20
2141	dopr_unit(i) = 'm2/s2'
2142	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2143	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2144
2145	CASE ( 'wptBC' )
2146	dopr_index(i) = 21
2147	dopr_unit(i) = 'K m/s'
2148	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2149
2150	CASE ( 'wptBC' )
2151	dopr_index(i) = 22
2152	dopr_unit(i) = 'K m/s'
2153	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2154
2155	CASE ( 'sa', '#sa' )
2156	IF ( .NOT. ocean ) THEN
2157	message_string = 'data_output_pr = ' // &
2158	TRIM( data_output_pr(i) ) // ' is not imp' // &
2159	'lemented for ocean = .FALSE.'
2160	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2161	ELSE
2162	dopr_index(i) = 23
2163	dopr_unit(i) = 'psu'
2164	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2165	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2166	dopr_initial_index(i) = 26
2167	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2168	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2169	data_output_pr(i) = data_output_pr(i)(2:)
2170	ENDIF
2171	ENDIF
2172
2173	CASE ( 'u*2' )
2174	dopr_index(i) = 30
2175	dopr_unit(i) = 'm2/s2'
2176	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2177
2178	CASE ( 'v*2' )
2179	dopr_index(i) = 31
2180	dopr_unit(i) = 'm2/s2'
2181	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2182
2183	CASE ( 'w*2' )
2184	dopr_index(i) = 32
2185	dopr_unit(i) = 'm2/s2'
2186	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2187
2188	CASE ( 'pt*2' )
2189	dopr_index(i) = 33
2190	dopr_unit(i) = 'K2'
2191	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2192
2193	CASE ( 'e*' )
2194	dopr_index(i) = 34
2195	dopr_unit(i) = 'm2/s2'
2196	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2197
2198	CASE ( 'w2pt' )
2199	dopr_index(i) = 35
2200	dopr_unit(i) = 'K m2/s2'
2201	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2202
2203	CASE ( 'wpt2' )
2204	dopr_index(i) = 36
2205	dopr_unit(i) = 'K2 m/s'
2206	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2207
2208	CASE ( 'we' )
2209	dopr_index(i) = 37
2210	dopr_unit(i) = 'm3/s3'
2211	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2212
2213	CASE ( 'w*3' )
2214	dopr_index(i) = 38
2215	dopr_unit(i) = 'm3/s3'
2216	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2217
2218	CASE ( 'Sw' )
2219	dopr_index(i) = 39
2220	dopr_unit(i) = 'none'
2221	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2222
2223	CASE ( 'p' )
2224	dopr_index(i) = 40
2225	dopr_unit(i) = 'Pa'
2226	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2227
2228	CASE ( 'q', '#q' )
2229	IF ( .NOT. humidity ) THEN
2230	message_string = 'data_output_pr = ' // &
2231	TRIM( data_output_pr(i) ) // ' is not imp' // &
2232	'lemented for humidity = .FALSE.'
2233	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2234	ELSE
2235	dopr_index(i) = 41
2236	dopr_unit(i) = 'kg/kg'
2237	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2238	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2239	dopr_initial_index(i) = 26
2240	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2241	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2242	data_output_pr(i) = data_output_pr(i)(2:)
2243	ENDIF
2244	ENDIF
2245
2246	CASE ( 's', '#s' )
2247	IF ( .NOT. passive_scalar ) THEN
2248	message_string = 'data_output_pr = ' // &
2249	TRIM( data_output_pr(i) ) // ' is not imp' // &
2250	'lemented for passive_scalar = .FALSE.'
2251	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2252	ELSE
2253	dopr_index(i) = 41
2254	dopr_unit(i) = 'kg/m3'
2255	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2256	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2257	dopr_initial_index(i) = 26
2258	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2259	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2260	data_output_pr(i) = data_output_pr(i)(2:)
2261	ENDIF
2262	ENDIF
2263
2264	CASE ( 'qv', '#qv' )
2265	IF ( .NOT. cloud_physics ) THEN
2266	dopr_index(i) = 41
2267	dopr_unit(i) = 'kg/kg'
2268	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2269	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2270	dopr_initial_index(i) = 26
2271	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2272	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2273	data_output_pr(i) = data_output_pr(i)(2:)
2274	ENDIF
2275	ELSE
2276	dopr_index(i) = 42
2277	dopr_unit(i) = 'kg/kg'
2278	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2279	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2280	dopr_initial_index(i) = 27
2281	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2282	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2283	data_output_pr(i) = data_output_pr(i)(2:)
2284	ENDIF
2285	ENDIF
2286
2287	CASE ( 'lpt', '#lpt' )
2288	IF ( .NOT. cloud_physics ) THEN
2289	message_string = 'data_output_pr = ' // &
2290	TRIM( data_output_pr(i) ) // ' is not imp' // &
2291	'lemented for cloud_physics = .FALSE.'
2292	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2293	ELSE
2294	dopr_index(i) = 4
2295	dopr_unit(i) = 'K'
2296	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2297	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2298	dopr_initial_index(i) = 7
2299	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2300	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2301	data_output_pr(i) = data_output_pr(i)(2:)
2302	ENDIF
2303	ENDIF
2304
2305	CASE ( 'vpt', '#vpt' )
2306	dopr_index(i) = 44
2307	dopr_unit(i) = 'K'
2308	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2309	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2310	dopr_initial_index(i) = 29
2311	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2312	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2313	data_output_pr(i) = data_output_pr(i)(2:)
2314	ENDIF
2315
2316	CASE ( 'w"vpt"' )
2317	dopr_index(i) = 45
2318	dopr_unit(i) = 'K m/s'
2319	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2320
2321	CASE ( 'wvpt' )
2322	dopr_index(i) = 46
2323	dopr_unit(i) = 'K m/s'
2324	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2325
2326	CASE ( 'wvpt' )
2327	dopr_index(i) = 47
2328	dopr_unit(i) = 'K m/s'
2329	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2330
2331	CASE ( 'w"q"' )
2332	IF ( .NOT. humidity ) THEN
2333	message_string = 'data_output_pr = ' // &
2334	TRIM( data_output_pr(i) ) // ' is not imp' // &
2335	'lemented for humidity = .FALSE.'
2336	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2337	ELSE
2338	dopr_index(i) = 48
2339	dopr_unit(i) = 'kg/kg m/s'
2340	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2341	ENDIF
2342
2343	CASE ( 'wq' )
2344	IF ( .NOT. humidity ) THEN
2345	message_string = 'data_output_pr = ' // &
2346	TRIM( data_output_pr(i) ) // ' is not imp' // &
2347	'lemented for humidity = .FALSE.'
2348	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2349	ELSE
2350	dopr_index(i) = 49
2351	dopr_unit(i) = 'kg/kg m/s'
2352	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2353	ENDIF
2354
2355	CASE ( 'wq' )
2356	IF ( .NOT. humidity ) THEN
2357	message_string = 'data_output_pr = ' // &
2358	TRIM( data_output_pr(i) ) // ' is not imp' // &
2359	'lemented for humidity = .FALSE.'
2360	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2361	ELSE
2362	dopr_index(i) = 50
2363	dopr_unit(i) = 'kg/kg m/s'
2364	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2365	ENDIF
2366
2367	CASE ( 'w"s"' )
2368	IF ( .NOT. passive_scalar ) THEN
2369	message_string = 'data_output_pr = ' // &
2370	TRIM( data_output_pr(i) ) // ' is not imp' // &
2371	'lemented for passive_scalar = .FALSE.'
2372	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2373	ELSE
2374	dopr_index(i) = 48
2375	dopr_unit(i) = 'kg/m3 m/s'
2376	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2377	ENDIF
2378
2379	CASE ( 'ws' )
2380	IF ( .NOT. passive_scalar ) THEN
2381	message_string = 'data_output_pr = ' // &
2382	TRIM( data_output_pr(i) ) // ' is not imp' // &
2383	'lemented for passive_scalar = .FALSE.'
2384	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2385	ELSE
2386	dopr_index(i) = 49
2387	dopr_unit(i) = 'kg/m3 m/s'
2388	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2389	ENDIF
2390
2391	CASE ( 'ws' )
2392	IF ( .NOT. passive_scalar ) THEN
2393	message_string = 'data_output_pr = ' // &
2394	TRIM( data_output_pr(i) ) // ' is not imp' // &
2395	'lemented for passive_scalar = .FALSE.'
2396	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2397	ELSE
2398	dopr_index(i) = 50
2399	dopr_unit(i) = 'kg/m3 m/s'
2400	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2401	ENDIF
2402
2403	CASE ( 'w"qv"' )
2404	IF ( humidity .AND. .NOT. cloud_physics ) &
2405	THEN
2406	dopr_index(i) = 48
2407	dopr_unit(i) = 'kg/kg m/s'
2408	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2409	ELSEIF( humidity .AND. cloud_physics ) THEN
2410	dopr_index(i) = 51
2411	dopr_unit(i) = 'kg/kg m/s'
2412	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2413	ELSE
2414	message_string = 'data_output_pr = ' // &
2415	TRIM( data_output_pr(i) ) // ' is not imp' // &
2416	'lemented for cloud_physics = .FALSE. an&' // &
2417	'd humidity = .FALSE.'
2418	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2419	ENDIF
2420
2421	CASE ( 'wqv' )
2422	IF ( humidity .AND. .NOT. cloud_physics ) &
2423	THEN
2424	dopr_index(i) = 49
2425	dopr_unit(i) = 'kg/kg m/s'
2426	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2427	ELSEIF( humidity .AND. cloud_physics ) THEN
2428	dopr_index(i) = 52
2429	dopr_unit(i) = 'kg/kg m/s'
2430	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2431	ELSE
2432	message_string = 'data_output_pr = ' // &
2433	TRIM( data_output_pr(i) ) // ' is not imp' // &
2434	'lemented for cloud_physics = .FALSE. an&' // &
2435	'd humidity = .FALSE.'
2436	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2437	ENDIF
2438
2439	CASE ( 'wqv' )
2440	IF ( humidity .AND. .NOT. cloud_physics ) &
2441	THEN
2442	dopr_index(i) = 50
2443	dopr_unit(i) = 'kg/kg m/s'
2444	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2445	ELSEIF( humidity .AND. cloud_physics ) THEN
2446	dopr_index(i) = 53
2447	dopr_unit(i) = 'kg/kg m/s'
2448	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2449	ELSE
2450	message_string = 'data_output_pr = ' // &
2451	TRIM( data_output_pr(i) ) // ' is not imp' // &
2452	'lemented for cloud_physics = .FALSE. an&' // &
2453	'd humidity = .FALSE.'
2454	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2455	ENDIF
2456
2457	CASE ( 'ql' )
2458	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2459	message_string = 'data_output_pr = ' // &
2460	TRIM( data_output_pr(i) ) // ' is not imp' // &
2461	'lemented for cloud_physics = .FALSE. or' // &
2462	'&cloud_droplets = .FALSE.'
2463	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2464	ELSE
2465	dopr_index(i) = 54
2466	dopr_unit(i) = 'kg/kg'
2467	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2468	ENDIF
2469
2470	CASE ( 'wuu*:dz' )
2471	dopr_index(i) = 55
2472	dopr_unit(i) = 'm2/s3'
2473	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2474
2475	CASE ( 'wp:dz' )
2476	dopr_index(i) = 56
2477	dopr_unit(i) = 'm2/s3'
2478	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2479
2480	CASE ( 'w"e:dz' )
2481	dopr_index(i) = 57
2482	dopr_unit(i) = 'm2/s3'
2483	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2484
2485
2486	CASE ( 'u"pt"' )
2487	dopr_index(i) = 58
2488	dopr_unit(i) = 'K m/s'
2489	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2490
2491	CASE ( 'upt' )
2492	dopr_index(i) = 59
2493	dopr_unit(i) = 'K m/s'
2494	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2495
2496	CASE ( 'upt_t' )
2497	dopr_index(i) = 60
2498	dopr_unit(i) = 'K m/s'
2499	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2500
2501	CASE ( 'v"pt"' )
2502	dopr_index(i) = 61
2503	dopr_unit(i) = 'K m/s'
2504	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2505
2506	CASE ( 'vpt' )
2507	dopr_index(i) = 62
2508	dopr_unit(i) = 'K m/s'
2509	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2510
2511	CASE ( 'vpt_t' )
2512	dopr_index(i) = 63
2513	dopr_unit(i) = 'K m/s'
2514	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2515
2516	CASE ( 'rho' )
2517	IF ( .NOT. ocean ) THEN
2518	message_string = 'data_output_pr = ' // &
2519	TRIM( data_output_pr(i) ) // ' is not imp' // &
2520	'lemented for ocean = .FALSE.'
2521	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2522	ELSE
2523	dopr_index(i) = 64
2524	dopr_unit(i) = 'kg/m3'
2525	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2526	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2527	dopr_initial_index(i) = 77
2528	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
2529	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
2530	data_output_pr(i) = data_output_pr(i)(2:)
2531	ENDIF
2532	ENDIF
2533
2534	CASE ( 'w"sa"' )
2535	IF ( .NOT. ocean ) THEN
2536	message_string = 'data_output_pr = ' // &
2537	TRIM( data_output_pr(i) ) // ' is not imp' // &
2538	'lemented for ocean = .FALSE.'
2539	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2540	ELSE
2541	dopr_index(i) = 65
2542	dopr_unit(i) = 'psu m/s'
2543	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2544	ENDIF
2545
2546	CASE ( 'wsa' )
2547	IF ( .NOT. ocean ) THEN
2548	message_string = 'data_output_pr = ' // &
2549	TRIM( data_output_pr(i) ) // ' is not imp' // &
2550	'lemented for ocean = .FALSE.'
2551	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2552	ELSE
2553	dopr_index(i) = 66
2554	dopr_unit(i) = 'psu m/s'
2555	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2556	ENDIF
2557
2558	CASE ( 'wsa' )
2559	IF ( .NOT. ocean ) THEN
2560	message_string = 'data_output_pr = ' // &
2561	TRIM( data_output_pr(i) ) // ' is not imp' // &
2562	'lemented for ocean = .FALSE.'
2563	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2564	ELSE
2565	dopr_index(i) = 67
2566	dopr_unit(i) = 'psu m/s'
2567	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2568	ENDIF
2569
2570	CASE ( 'wp' )
2571	dopr_index(i) = 68
2572	dopr_unit(i) = 'm3/s3'
2573	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2574
2575	CASE ( 'w"e' )
2576	dopr_index(i) = 69
2577	dopr_unit(i) = 'm3/s3'
2578	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2579
2580	CASE ( 'q*2' )
2581	IF ( .NOT. humidity ) THEN
2582	message_string = 'data_output_pr = ' // &
2583	TRIM( data_output_pr(i) ) // ' is not imp' // &
2584	'lemented for humidity = .FALSE.'
2585	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2586	ELSE
2587	dopr_index(i) = 70
2588	dopr_unit(i) = 'kg2/kg2'
2589	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2590	ENDIF
2591
2592	CASE ( 'prho' )
2593	IF ( .NOT. ocean ) THEN
2594	message_string = 'data_output_pr = ' // &
2595	TRIM( data_output_pr(i) ) // ' is not imp' // &
2596	'lemented for ocean = .FALSE.'
2597	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2598	ELSE
2599	dopr_index(i) = 71
2600	dopr_unit(i) = 'kg/m3'
2601	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2602	ENDIF
2603
2604	CASE ( 'hyp' )
2605	dopr_index(i) = 72
2606	dopr_unit(i) = 'dbar'
2607	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2608
2609	CASE ( 'nr' )
2610	IF ( .NOT. cloud_physics ) THEN
2611	message_string = 'data_output_pr = ' // &
2612	TRIM( data_output_pr(i) ) // ' is not imp' // &
2613	'lemented for cloud_physics = .FALSE.'
2614	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2615	ELSEIF ( icloud_scheme /= 0 ) THEN
2616	message_string = 'data_output_pr = ' // &
2617	TRIM( data_output_pr(i) ) // ' is not imp' // &
2618	'lemented for cloud_scheme /= seifert_beheng'
2619	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2620	ELSEIF ( .NOT. precipitation ) THEN
2621	message_string = 'data_output_pr = ' // &
2622	TRIM( data_output_pr(i) ) // ' is not imp' // &
2623	'lemented for precipitation = .FALSE.'
2624	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2625	ELSE
2626	dopr_index(i) = 73
2627	dopr_unit(i) = '1/m3'
2628	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2629	ENDIF
2630
2631	CASE ( 'qr' )
2632	IF ( .NOT. cloud_physics ) THEN
2633	message_string = 'data_output_pr = ' // &
2634	TRIM( data_output_pr(i) ) // ' is not imp' // &
2635	'lemented for cloud_physics = .FALSE.'
2636	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2637	ELSEIF ( icloud_scheme /= 0 ) THEN
2638	message_string = 'data_output_pr = ' // &
2639	TRIM( data_output_pr(i) ) // ' is not imp' // &
2640	'lemented for cloud_scheme /= seifert_beheng'
2641	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2642	ELSEIF ( .NOT. precipitation ) THEN
2643	message_string = 'data_output_pr = ' // &
2644	TRIM( data_output_pr(i) ) // ' is not imp' // &
2645	'lemented for precipitation = .FALSE.'
2646	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2647	ELSE
2648	dopr_index(i) = 74
2649	dopr_unit(i) = 'kg/kg'
2650	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2651	ENDIF
2652
2653	CASE ( 'qc' )
2654	IF ( .NOT. cloud_physics ) THEN
2655	message_string = 'data_output_pr = ' // &
2656	TRIM( data_output_pr(i) ) // ' is not imp' // &
2657	'lemented for cloud_physics = .FALSE.'
2658	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2659	ELSEIF ( icloud_scheme /= 0 ) THEN
2660	message_string = 'data_output_pr = ' // &
2661	TRIM( data_output_pr(i) ) // ' is not imp' // &
2662	'lemented for cloud_scheme /= seifert_beheng'
2663	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2664	ELSE
2665	dopr_index(i) = 75
2666	dopr_unit(i) = 'kg/kg'
2667	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2668	ENDIF
2669
2670	CASE ( 'prr' )
2671	IF ( .NOT. cloud_physics ) THEN
2672	message_string = 'data_output_pr = ' // &
2673	TRIM( data_output_pr(i) ) // ' is not imp' // &
2674	'lemented for cloud_physics = .FALSE.'
2675	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2676	ELSEIF ( icloud_scheme /= 0 ) THEN
2677	message_string = 'data_output_pr = ' // &
2678	TRIM( data_output_pr(i) ) // ' is not imp' // &
2679	'lemented for cloud_scheme /= seifert_beheng'
2680	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2681	ELSEIF ( .NOT. precipitation ) THEN
2682	message_string = 'data_output_pr = ' // &
2683	TRIM( data_output_pr(i) ) // ' is not imp' // &
2684	'lemented for precipitation = .FALSE.'
2685	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2686
2687	ELSE
2688	dopr_index(i) = 76
2689	dopr_unit(i) = 'kg/kg m/s'
2690	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2691	ENDIF
2692
2693	CASE ( 'ug' )
2694	dopr_index(i) = 78
2695	dopr_unit(i) = 'm/s'
2696	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
2697
2698	CASE ( 'vg' )
2699	dopr_index(i) = 79
2700	dopr_unit(i) = 'm/s'
2701	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
2702
2703	CASE DEFAULT
2704
2705	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2706
2707	IF ( unit == 'illegal' ) THEN
2708	IF ( data_output_pr_user(1) /= ' ' ) THEN
2709	message_string = 'illegal value for data_output_pr or ' // &
2710	'data_output_pr_user = "' // &
2711	TRIM( data_output_pr(i) ) // '"'
2712	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2713	ELSE
2714	message_string = 'illegal value for data_output_pr = "' // &
2715	TRIM( data_output_pr(i) ) // '"'
2716	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2717	ENDIF
2718	ENDIF
2719
2720	END SELECT
2721
2722	ENDDO
2723
2724
2725	!
2726	!-- Append user-defined data output variables to the standard data output
2727	IF ( data_output_user(1) /= ' ' ) THEN
2728	i = 1
2729	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2730	i = i + 1
2731	ENDDO
2732	j = 1
2733	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2734	IF ( i > 100 ) THEN
2735	message_string = 'number of output quantitities given by data' // &
2736	'_output and data_output_user exceeds the limit of 100'
2737	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2738	ENDIF
2739	data_output(i) = data_output_user(j)
2740	i = i + 1
2741	j = j + 1
2742	ENDDO
2743	ENDIF
2744
2745	!
2746	!-- Check and set steering parameters for 2d/3d data output and averaging
2747	i = 1
2748	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2749	!
2750	!-- Check for data averaging
2751	ilen = LEN_TRIM( data_output(i) )
2752	j = 0 ! no data averaging
2753	IF ( ilen > 3 ) THEN
2754	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2755	j = 1 ! data averaging
2756	data_output(i) = data_output(i)(1:ilen-3)
2757	ENDIF
2758	ENDIF
2759	!
2760	!-- Check for cross section or volume data
2761	ilen = LEN_TRIM( data_output(i) )
2762	k = 0 ! 3d data
2763	var = data_output(i)(1:ilen)
2764	IF ( ilen > 3 ) THEN
2765	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2766	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2767	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2768	k = 1 ! 2d data
2769	var = data_output(i)(1:ilen-3)
2770	ENDIF
2771	ENDIF
2772	!
2773	!-- Check for allowed value and set units
2774	SELECT CASE ( TRIM( var ) )
2775
2776	CASE ( 'e' )
2777	IF ( constant_diffusion ) THEN
2778	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2779	'res constant_diffusion = .FALSE.'
2780	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2781	ENDIF
2782	unit = 'm2/s2'
2783
2784	CASE ( 'lpt' )
2785	IF ( .NOT. cloud_physics ) THEN
2786	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2787	'res cloud_physics = .TRUE.'
2788	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2789	ENDIF
2790	unit = 'K'
2791
2792	CASE ( 'nr' )
2793	IF ( .NOT. cloud_physics ) THEN
2794	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2795	'res cloud_physics = .TRUE.'
2796	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2797	ELSEIF ( icloud_scheme /= 0 ) THEN
2798	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2799	'res cloud_scheme = seifert_beheng'
2800	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2801	ENDIF
2802	unit = '1/m3'
2803
2804	CASE ( 'pc', 'pr' )
2805	IF ( .NOT. particle_advection ) THEN
2806	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2807	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2808	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2809	ENDIF
2810	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2811	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2812
2813	CASE ( 'prr' )
2814	IF ( .NOT. cloud_physics ) THEN
2815	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2816	'res cloud_physics = .TRUE.'
2817	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2818	ELSEIF ( icloud_scheme /= 0 ) THEN
2819	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2820	'res cloud_scheme = seifert_beheng'
2821	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2822	ELSEIF ( .NOT. precipitation ) THEN
2823	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2824	'res precipitation = .TRUE.'
2825	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2826	ENDIF
2827	unit = 'kg/kg m/s'
2828
2829	CASE ( 'q', 'vpt' )
2830	IF ( .NOT. humidity ) THEN
2831	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2832	'res humidity = .TRUE.'
2833	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2834	ENDIF
2835	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2836	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2837
2838	CASE ( 'qc' )
2839	IF ( .NOT. cloud_physics ) THEN
2840	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2841	'res cloud_physics = .TRUE.'
2842	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2843	ELSEIF ( icloud_scheme /= 0 ) THEN
2844	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2845	'res cloud_scheme = seifert_beheng'
2846	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2847	ENDIF
2848	unit = 'kg/kg'
2849
2850	CASE ( 'ql' )
2851	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2852	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2853	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2854	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2855	ENDIF
2856	unit = 'kg/kg'
2857
2858	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2859	IF ( .NOT. cloud_droplets ) THEN
2860	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2861	'res cloud_droplets = .TRUE.'
2862	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2863	ENDIF
2864	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2865	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2866	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2867
2868	CASE ( 'qr' )
2869	IF ( .NOT. cloud_physics ) THEN
2870	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2871	'res cloud_physics = .TRUE.'
2872	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2873	ELSEIF ( icloud_scheme /= 0 ) THEN
2874	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2875	'res cloud_scheme = seifert_beheng'
2876	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2877	ELSEIF ( .NOT. precipitation ) THEN
2878	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2879	'res precipitation = .TRUE.'
2880	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2881	ENDIF
2882	unit = 'kg/kg'
2883
2884	CASE ( 'qv' )
2885	IF ( .NOT. cloud_physics ) THEN
2886	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2887	'res cloud_physics = .TRUE.'
2888	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2889	ENDIF
2890	unit = 'kg/kg'
2891
2892	CASE ( 'rho' )
2893	IF ( .NOT. ocean ) THEN
2894	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2895	'res ocean = .TRUE.'
2896	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2897	ENDIF
2898	unit = 'kg/m3'
2899
2900	CASE ( 's' )
2901	IF ( .NOT. passive_scalar ) THEN
2902	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2903	'res passive_scalar = .TRUE.'
2904	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2905	ENDIF
2906	unit = 'conc'
2907
2908	CASE ( 'sa' )
2909	IF ( .NOT. ocean ) THEN
2910	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2911	'res ocean = .TRUE.'
2912	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2913	ENDIF
2914	unit = 'psu'
2915
2916	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2917	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2918	message_string = 'illegal value for data_output: "' // &
2919	TRIM( var ) // '" & only 2d-horizontal ' // &
2920	'cross sections are allowed for this value'
2921	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2922	ENDIF
2923	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2924	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2925	'res cloud_physics = .TRUE.'
2926	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2927	ENDIF
2928	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2929	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2930	'res precipitation = .TRUE.'
2931	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2932	ENDIF
2933	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2934	message_string = 'temporal averaging of precipitation ' // &
2935	'amount "' // TRIM( var ) // '" is not possible'
2936	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2937	ENDIF
2938	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2939	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2940	'res precipitation = .TRUE.'
2941	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2942	ENDIF
2943	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2944	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2945	'res humidity = .TRUE.'
2946	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2947	ENDIF
2948
2949	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2950	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2951	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2952	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2953	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2954	IF ( TRIM( var ) == 't*' ) unit = 'K'
2955	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2956	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2957	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2958
2959
2960	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2961	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2962	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2963	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2964	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2965	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2966	CONTINUE
2967
2968	CASE DEFAULT
2969	CALL user_check_data_output( var, unit )
2970
2971	IF ( unit == 'illegal' ) THEN
2972	IF ( data_output_user(1) /= ' ' ) THEN
2973	message_string = 'illegal value for data_output or ' // &
2974	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2975	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2976	ELSE
2977	message_string = 'illegal value for data_output =' // &
2978	TRIM( data_output(i) ) // '"'
2979	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2980	ENDIF
2981	ENDIF
2982
2983	END SELECT
2984	!
2985	!-- Set the internal steering parameters appropriately
2986	IF ( k == 0 ) THEN
2987	do3d_no(j) = do3d_no(j) + 1
2988	do3d(j,do3d_no(j)) = data_output(i)
2989	do3d_unit(j,do3d_no(j)) = unit
2990	ELSE
2991	do2d_no(j) = do2d_no(j) + 1
2992	do2d(j,do2d_no(j)) = data_output(i)
2993	do2d_unit(j,do2d_no(j)) = unit
2994	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2995	data_output_xy(j) = .TRUE.
2996	ENDIF
2997	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2998	data_output_xz(j) = .TRUE.
2999	ENDIF
3000	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3001	data_output_yz(j) = .TRUE.
3002	ENDIF
3003	ENDIF
3004
3005	IF ( j == 1 ) THEN
3006	!
3007	!-- Check, if variable is already subject to averaging
3008	found = .FALSE.
3009	DO k = 1, doav_n
3010	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
3011	ENDDO
3012
3013	IF ( .NOT. found ) THEN
3014	doav_n = doav_n + 1
3015	doav(doav_n) = var
3016	ENDIF
3017	ENDIF
3018
3019	i = i + 1
3020	ENDDO
3021
3022	!
3023	!-- Averaged 2d or 3d output requires that an averaging interval has been set
3024	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
3025	WRITE( message_string, * ) 'output of averaged quantity "', &
3026	TRIM( doav(1) ), '_av" requires to set a ', &
3027	'non-zero & averaging interval'
3028	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
3029	ENDIF
3030
3031	!
3032	!-- Check sectional planes and store them in one shared array
3033	IF ( ANY( section_xy > nz + 1 ) ) THEN
3034	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3035	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3036	ENDIF
3037	IF ( ANY( section_xz > ny + 1 ) ) THEN
3038	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3039	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3040	ENDIF
3041	IF ( ANY( section_yz > nx + 1 ) ) THEN
3042	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3043	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3044	ENDIF
3045	section(:,1) = section_xy
3046	section(:,2) = section_xz
3047	section(:,3) = section_yz
3048
3049	!
3050	!-- Upper plot limit for 2D vertical sections
3051	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
3052	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3053	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3054	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3055	' (zu(nzt))'
3056	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3057	ENDIF
3058
3059	!
3060	!-- Upper plot limit for 3D arrays
3061	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3062
3063	!
3064	!-- Determine and check accuracy for compressed 3D plot output
3065	IF ( do3d_compress ) THEN
3066	!
3067	!-- Compression only permissible on T3E machines
3068	IF ( host(1:3) /= 't3e' ) THEN
3069	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3070	TRIM( host ) // '"'
3071	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3072	ENDIF
3073
3074	i = 1
3075	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3076
3077	ilen = LEN_TRIM( do3d_comp_prec(i) )
3078	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3079	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3080	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3081	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3082	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3083	ENDIF
3084
3085	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3086	var = do3d_comp_prec(i)(1:ilen-1)
3087
3088	SELECT CASE ( var )
3089
3090	CASE ( 'u' )
3091	j = 1
3092	CASE ( 'v' )
3093	j = 2
3094	CASE ( 'w' )
3095	j = 3
3096	CASE ( 'p' )
3097	j = 4
3098	CASE ( 'pt' )
3099	j = 5
3100
3101	CASE DEFAULT
3102	WRITE( message_string, * ) 'unknown variable "', &
3103	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3104	i, ')'
3105	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3106
3107	END SELECT
3108
3109	plot_3d_precision(j)%precision = prec
3110	i = i + 1
3111
3112	ENDDO
3113	ENDIF
3114
3115	!
3116	!-- Check the data output format(s)
3117	IF ( data_output_format(1) == ' ' ) THEN
3118	!
3119	!-- Default value
3120	netcdf_output = .TRUE.
3121	ELSE
3122	i = 1
3123	DO WHILE ( data_output_format(i) /= ' ' )
3124
3125	SELECT CASE ( data_output_format(i) )
3126
3127	CASE ( 'netcdf' )
3128	netcdf_output = .TRUE.
3129	CASE ( 'iso2d' )
3130	iso2d_output = .TRUE.
3131	CASE ( 'avs' )
3132	avs_output = .TRUE.
3133
3134	CASE DEFAULT
3135	message_string = 'unknown value for data_output_format "' // &
3136	TRIM( data_output_format(i) ) // '"'
3137	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3138
3139	END SELECT
3140
3141	i = i + 1
3142	IF ( i > 10 ) EXIT
3143
3144	ENDDO
3145	ENDIF
3146
3147	!
3148	!-- Set output format string (used in header)
3149	IF ( netcdf_output ) THEN
3150
3151	SELECT CASE ( netcdf_data_format )
3152	CASE ( 1 )
3153	output_format_netcdf = 'netCDF classic'
3154	CASE ( 2 )
3155	output_format_netcdf = 'netCDF 64bit offset'
3156	CASE ( 3 )
3157	output_format_netcdf = 'netCDF4/HDF5'
3158	CASE ( 4 )
3159	output_format_netcdf = 'netCDF4/HDF5 classic'
3160	CASE ( 5 )
3161	output_format_netcdf = 'parallel netCDF4/HDF5'
3162	CASE ( 6 )
3163	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3164
3165	END SELECT
3166
3167	ENDIF
3168
3169	#if defined( __spectra )
3170	!
3171	!-- Check the number of spectra level to be output
3172	i = 1
3173	DO WHILE ( comp_spectra_level(i) /= 999999 .AND. i <= 100 )
3174	i = i + 1
3175	ENDDO
3176	i = i - 1
3177	IF ( i == 0 ) THEN
3178	WRITE( message_string, * ) 'no spectra levels given'
3179	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
3180	ENDIF
3181	#endif
3182
3183	!
3184	!-- Check mask conditions
3185	DO mid = 1, max_masks
3186	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3187	data_output_masks_user(mid,1) /= ' ' ) THEN
3188	masks = masks + 1
3189	ENDIF
3190	ENDDO
3191
3192	IF ( masks < 0 .OR. masks > max_masks ) THEN
3193	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3194	'<= ', max_masks, ' (=max_masks)'
3195	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3196	ENDIF
3197	IF ( masks > 0 ) THEN
3198	mask_scale(1) = mask_scale_x
3199	mask_scale(2) = mask_scale_y
3200	mask_scale(3) = mask_scale_z
3201	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3202	WRITE( message_string, * ) &
3203	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3204	'must be > 0.0'
3205	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3206	ENDIF
3207	!
3208	!-- Generate masks for masked data output
3209	CALL init_masks
3210	ENDIF
3211
3212	!
3213	!-- Check the NetCDF data format
3214	#if ! defined ( __check )
3215	IF ( netcdf_data_format > 2 ) THEN
3216	#if defined( __netcdf4 )
3217	CONTINUE
3218	#else
3219	message_string = 'netCDF: netCDF4 format requested but no ' // &
3220	'cpp-directive __netcdf4 given & switch ' // &
3221	'back to 64-bit offset format'
3222	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3223	netcdf_data_format = 2
3224	#endif
3225	ENDIF
3226	IF ( netcdf_data_format > 4 ) THEN
3227	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3228	CONTINUE
3229	#else
3230	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3231	'cpp-directive __netcdf4_parallel given & switch ' // &
3232	'back to netCDF4 non-parallel output'
3233	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3234	netcdf_data_format = netcdf_data_format - 2
3235	#endif
3236	ENDIF
3237	#endif
3238
3239	#if ! defined( __check )
3240	!
3241	!-- Check netcdf precison
3242	ldum = .FALSE.
3243	CALL define_netcdf_header( 'ch', ldum, 0 )
3244	#endif
3245	!
3246	!-- Check, whether a constant diffusion coefficient shall be used
3247	IF ( km_constant /= -1.0 ) THEN
3248	IF ( km_constant < 0.0 ) THEN
3249	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3250	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3251	ELSE
3252	IF ( prandtl_number < 0.0 ) THEN
3253	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3254	' < 0.0'
3255	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3256	ENDIF
3257	constant_diffusion = .TRUE.
3258
3259	IF ( prandtl_layer ) THEN
3260	message_string = 'prandtl_layer is not allowed with fixed ' // &
3261	'value of km'
3262	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3263	ENDIF
3264	ENDIF
3265	ENDIF
3266
3267	!
3268	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3269	!-- potential temperature, check the width of the damping layer
3270	IF ( bc_lr /= 'cyclic' ) THEN
3271	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3272	message_string = 'pt_damping_width out of range'
3273	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3274	ENDIF
3275	ENDIF
3276
3277	IF ( bc_ns /= 'cyclic' ) THEN
3278	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3279	message_string = 'pt_damping_width out of range'
3280	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3281	ENDIF
3282	ENDIF
3283
3284	!
3285	!-- Check value range for rif
3286	IF ( rif_min >= rif_max ) THEN
3287	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3288	'than rif_max = ', rif_max
3289	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3290	ENDIF
3291
3292	!
3293	!-- Determine upper and lower hight level indices for random perturbations
3294	IF ( disturbance_level_b == -9999999.9 ) THEN
3295	IF ( ocean ) THEN
3296	disturbance_level_b = zu((nzt*2)/3)
3297	disturbance_level_ind_b = ( nzt * 2 ) / 3
3298	ELSE
3299	disturbance_level_b = zu(nzb+3)
3300	disturbance_level_ind_b = nzb + 3
3301	ENDIF
3302	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3303	WRITE( message_string, * ) 'disturbance_level_b = ', &
3304	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3305	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3306	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3307	WRITE( message_string, * ) 'disturbance_level_b = ', &
3308	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3309	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3310	ELSE
3311	DO k = 3, nzt-2
3312	IF ( disturbance_level_b <= zu(k) ) THEN
3313	disturbance_level_ind_b = k
3314	EXIT
3315	ENDIF
3316	ENDDO
3317	ENDIF
3318
3319	IF ( disturbance_level_t == -9999999.9 ) THEN
3320	IF ( ocean ) THEN
3321	disturbance_level_t = zu(nzt-3)
3322	disturbance_level_ind_t = nzt - 3
3323	ELSE
3324	disturbance_level_t = zu(nzt/3)
3325	disturbance_level_ind_t = nzt / 3
3326	ENDIF
3327	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3328	WRITE( message_string, * ) 'disturbance_level_t = ', &
3329	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3330	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3331	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3332	WRITE( message_string, * ) 'disturbance_level_t = ', &
3333	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3334	disturbance_level_b
3335	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3336	ELSE
3337	DO k = 3, nzt-2
3338	IF ( disturbance_level_t <= zu(k) ) THEN
3339	disturbance_level_ind_t = k
3340	EXIT
3341	ENDIF
3342	ENDDO
3343	ENDIF
3344
3345	!
3346	!-- Check again whether the levels determined this way are ok.
3347	!-- Error may occur at automatic determination and too few grid points in
3348	!-- z-direction.
3349	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3350	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3351	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3352	disturbance_level_b
3353	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3354	ENDIF
3355
3356	!
3357	!-- Determine the horizontal index range for random perturbations.
3358	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3359	!-- near the inflow and the perturbation area is further limited to ...(1)
3360	!-- after the initial phase of the flow.
3361	dist_nxl = 0; dist_nxr = nx
3362	dist_nys = 0; dist_nyn = ny
3363	IF ( bc_lr /= 'cyclic' ) THEN
3364	IF ( inflow_disturbance_begin == -1 ) THEN
3365	inflow_disturbance_begin = MIN( 10, nx/2 )
3366	ENDIF
3367	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3368	THEN
3369	message_string = 'inflow_disturbance_begin out of range'
3370	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3371	ENDIF
3372	IF ( inflow_disturbance_end == -1 ) THEN
3373	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3374	ENDIF
3375	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3376	THEN
3377	message_string = 'inflow_disturbance_end out of range'
3378	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3379	ENDIF
3380	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3381	IF ( inflow_disturbance_begin == -1 ) THEN
3382	inflow_disturbance_begin = MIN( 10, ny/2 )
3383	ENDIF
3384	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3385	THEN
3386	message_string = 'inflow_disturbance_begin out of range'
3387	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3388	ENDIF
3389	IF ( inflow_disturbance_end == -1 ) THEN
3390	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3391	ENDIF
3392	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3393	THEN
3394	message_string = 'inflow_disturbance_end out of range'
3395	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3396	ENDIF
3397	ENDIF
3398
3399	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3400	dist_nxr = nx - inflow_disturbance_begin
3401	dist_nxl(1) = nx - inflow_disturbance_end
3402	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3403	dist_nxl = inflow_disturbance_begin
3404	dist_nxr(1) = inflow_disturbance_end
3405	ENDIF
3406	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3407	dist_nyn = ny - inflow_disturbance_begin
3408	dist_nys(1) = ny - inflow_disturbance_end
3409	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3410	dist_nys = inflow_disturbance_begin
3411	dist_nyn(1) = inflow_disturbance_end
3412	ENDIF
3413
3414	!
3415	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3416	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3417	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3418	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3419	'condition at the inflow boundary'
3420	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3421	ENDIF
3422
3423	!
3424	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3425	!-- data from prerun in the first main run
3426	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3427	initializing_actions /= 'read_restart_data' ) THEN
3428	message_string = 'turbulent_inflow = .T. requires ' // &
3429	'initializing_actions = ''cyclic_fill'' '
3430	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3431	ENDIF
3432
3433	!
3434	!-- In case of turbulent inflow calculate the index of the recycling plane
3435	IF ( turbulent_inflow ) THEN
3436	IF ( recycling_width == 9999999.9 ) THEN
3437	!
3438	!-- Set the default value for the width of the recycling domain
3439	recycling_width = 0.1 * nx * dx
3440	ELSE
3441	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3442	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3443	' ', recycling_width
3444	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3445	ENDIF
3446	ENDIF
3447	!
3448	!-- Calculate the index
3449	recycling_plane = recycling_width / dx
3450	ENDIF
3451
3452	!
3453	!-- Check random generator
3454	IF ( random_generator /= 'system-specific' .AND. &
3455	random_generator /= 'numerical-recipes' ) THEN
3456	message_string = 'unknown random generator: random_generator = "' // &
3457	TRIM( random_generator ) // '"'
3458	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3459	ENDIF
3460
3461	!
3462	!-- Determine damping level index for 1D model
3463	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3464	IF ( damp_level_1d == -1.0 ) THEN
3465	damp_level_1d = zu(nzt+1)
3466	damp_level_ind_1d = nzt + 1
3467	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3468	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3469	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3470	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3471	ELSE
3472	DO k = 1, nzt+1
3473	IF ( damp_level_1d <= zu(k) ) THEN
3474	damp_level_ind_1d = k
3475	EXIT
3476	ENDIF
3477	ENDDO
3478	ENDIF
3479	ENDIF
3480
3481	!
3482	!-- Check some other 1d-model parameters
3483	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3484	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3485	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3486	'" is unknown'
3487	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3488	ENDIF
3489	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3490	TRIM( dissipation_1d ) /= 'detering' ) THEN
3491	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3492	'" is unknown'
3493	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3494	ENDIF
3495
3496	!
3497	!-- Set time for the next user defined restart (time_restart is the
3498	!-- internal parameter for steering restart events)
3499	IF ( restart_time /= 9999999.9 ) THEN
3500	IF ( restart_time > time_since_reference_point ) THEN
3501	time_restart = restart_time
3502	ENDIF
3503	ELSE
3504	!
3505	!-- In case of a restart run, set internal parameter to default (no restart)
3506	!-- if the NAMELIST-parameter restart_time is omitted
3507	time_restart = 9999999.9
3508	ENDIF
3509
3510	!
3511	!-- Set default value of the time needed to terminate a model run
3512	IF ( termination_time_needed == -1.0 ) THEN
3513	IF ( host(1:3) == 'ibm' ) THEN
3514	termination_time_needed = 300.0
3515	ELSE
3516	termination_time_needed = 35.0
3517	ENDIF
3518	ENDIF
3519
3520	!
3521	!-- Check the time needed to terminate a model run
3522	IF ( host(1:3) == 't3e' ) THEN
3523	!
3524	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3525	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3526	IF ( termination_time_needed <= 30.0 ) THEN
3527	WRITE( message_string, * ) 'termination_time_needed = ', &
3528	termination_time_needed, ' must be > 30.0 on host "', &
3529	TRIM( host ), '"'
3530	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3531	ENDIF
3532	ELSEIF ( host(1:3) == 'ibm' ) THEN
3533	!
3534	!-- On IBM-regatta machines the time should be at least 300 seconds,
3535	!-- because the job time consumed before executing palm (for compiling,
3536	!-- copying of files, etc.) has to be regarded
3537	IF ( termination_time_needed < 300.0 ) THEN
3538	WRITE( message_string, * ) 'termination_time_needed = ', &
3539	termination_time_needed, ' should be >= 300.0 on host "', &
3540	TRIM( host ), '"'
3541	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3542	ENDIF
3543	ENDIF
3544
3545	!
3546	!-- Check pressure gradient conditions
3547	IF ( dp_external .AND. conserve_volume_flow ) THEN
3548	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3549	'w are .TRUE. but one of them must be .FALSE.'
3550	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3551	ENDIF
3552	IF ( dp_external ) THEN
3553	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3554	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3555	' of range'
3556	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3557	ENDIF
3558	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3559	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3560	'ro, i.e. the external pressure gradient & will not be applied'
3561	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3562	ENDIF
3563	ENDIF
3564	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3565	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3566	'.FALSE., i.e. the external pressure gradient & will not be applied'
3567	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3568	ENDIF
3569	IF ( conserve_volume_flow ) THEN
3570	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3571
3572	conserve_volume_flow_mode = 'initial_profiles'
3573
3574	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3575	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3576	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3577	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3578	conserve_volume_flow_mode
3579	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3580	ENDIF
3581	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3582	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3583	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3584	'require conserve_volume_flow_mode = ''initial_profiles'''
3585	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3586	ENDIF
3587	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3588	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3589	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3590	'require conserve_volume_flow_mode = ''initial_profiles''', &
3591	' or ''bulk_velocity'''
3592	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3593	ENDIF
3594	ENDIF
3595	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3596	( .NOT. conserve_volume_flow .OR. &
3597	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3598	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3599	'conserve_volume_flow = .T. and ', &
3600	'conserve_volume_flow_mode = ''bulk_velocity'''
3601	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3602	ENDIF
3603
3604	!
3605	!-- Check particle attributes
3606	IF ( particle_color /= 'none' ) THEN
3607	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3608	particle_color /= 'z' ) THEN
3609	message_string = 'illegal value for parameter particle_color: ' // &
3610	TRIM( particle_color)
3611	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3612	ELSE
3613	IF ( color_interval(2) <= color_interval(1) ) THEN
3614	message_string = 'color_interval(2) <= color_interval(1)'
3615	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3616	ENDIF
3617	ENDIF
3618	ENDIF
3619
3620	IF ( particle_dvrpsize /= 'none' ) THEN
3621	IF ( particle_dvrpsize /= 'absw' ) THEN
3622	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3623	' ' // TRIM( particle_color)
3624	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3625	ELSE
3626	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3627	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3628	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3629	ENDIF
3630	ENDIF
3631	ENDIF
3632
3633	!
3634	!-- Check nudging and large scale forcing from external file
3635	IF ( nudging .AND. ( .NOT. large_scale_forcing ) ) THEN
3636	message_string = 'Nudging requires large_scale_forcing = .T.. &'// &
3637	'Surface fluxes and geostrophic wind should be &'// &
3638	'prescribed in file LSF_DATA'
3639	CALL message( 'check_parameters', 'PA0374', 1, 2, 0, 6, 0 )
3640	ENDIF
3641
3642	IF ( large_scale_forcing .AND. ( bc_lr /= 'cyclic' .OR. &
3643	bc_ns /= 'cyclic' ) ) THEN
3644	message_string = 'Non-cyclic lateral boundaries do not allow for &' // &
3645	'the usage of large scale forcing from external file.'
3646	CALL message( 'check_parameters', 'PA0375', 1, 2, 0, 6, 0 )
3647	ENDIF
3648
3649	IF ( large_scale_forcing .AND. ( .NOT. humidity ) ) THEN
3650	message_string = 'The usage of large scale forcing from external &'//&
3651	'file LSF_DATA requires humidity = .T..'
3652	CALL message( 'check_parameters', 'PA0376', 1, 2, 0, 6, 0 )
3653	ENDIF
3654
3655	IF ( large_scale_forcing .AND. topography /= 'flat' ) THEN
3656	message_string = 'The usage of large scale forcing from external &'//&
3657	'file LSF_DATA is not implemented for non-flat topography'
3658	CALL message( 'check_parameters', 'PA0377', 1, 2, 0, 6, 0 )
3659	ENDIF
3660
3661	IF ( large_scale_forcing .AND. ocean ) THEN
3662	message_string = 'The usage of large scale forcing from external &'//&
3663	'file LSF_DATA is not implemented for ocean runs'
3664	CALL message( 'check_parameters', 'PA0378', 1, 2, 0, 6, 0 )
3665	ENDIF
3666	!
3667	!-- Check &userpar parameters
3668	CALL user_check_parameters
3669
3670
3671
3672	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |