Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1079

Last change on this file since 1079 was 1070, checked in by maronga, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 142.6 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1070 2012-11-28 16:26:33Z maronga $
27	!
28	! 1069 2012-11-28 16:18:43Z maronga
29	! allow usage of topography in combination with cloud physics
30	!
31	! 1065 2012-11-22 17:42:36Z hoffmann
32	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
33	! precipitation in order to save computational resources.
34	!
35	! 1060 2012-11-21 07:19:51Z raasch
36	! additional check for parameter turbulent_inflow
37	!
38	! 1053 2012-11-13 17:11:03Z hoffmann
39	! necessary changes for the new two-moment cloud physics scheme added:
40	! - check cloud physics scheme (Kessler or Seifert and Beheng)
41	! - plant_canopy is not allowed
42	! - currently, only cache loop_optimization is allowed
43	! - initial profiles of nr, qr
44	! - boundary condition of nr, qr
45	! - check output quantities (qr, nr, prr)
46	!
47	! 1036 2012-10-22 13:43:42Z raasch
48	! code put under GPL (PALM 3.9)
49	!
50	! 1031/1034 2012-10-22 11:32:49Z raasch
51	! check of netcdf4 parallel file support
52	!
53	! 1019 2012-09-28 06:46:45Z raasch
54	! non-optimized version of prognostic_equations not allowed any more
55	!
56	! 1015 2012-09-27 09:23:24Z raasch
57	! acc allowed for loop optimization,
58	! checks for adjustment of mixing length to the Prandtl mixing length removed
59	!
60	! 1003 2012-09-14 14:35:53Z raasch
61	! checks for cases with unequal subdomain sizes removed
62	!
63	! 1001 2012-09-13 14:08:46Z raasch
64	! all actions concerning leapfrog- and upstream-spline-scheme removed
65	!
66	! 996 2012-09-07 10:41:47Z raasch
67	! little reformatting
68
69	! 978 2012-08-09 08:28:32Z fricke
70	! setting of bc_lr/ns_dirneu/neudir
71	! outflow damping layer removed
72	! check for z0h*
73	! check for pt_damping_width
74	!
75	! 964 2012-07-26 09:14:24Z raasch
76	! check of old profil-parameters removed
77	!
78	! 940 2012-07-09 14:31:00Z raasch
79	! checks for parameter neutral
80	!
81	! 924 2012-06-06 07:44:41Z maronga
82	! Bugfix: preprocessor directives caused error during compilation
83	!
84	! 892 2012-05-02 13:51:44Z maronga
85	! Bugfix for parameter file check ( excluding __netcdf4 )
86	!
87	! 866 2012-03-28 06:44:41Z raasch
88	! use only 60% of the geostrophic wind as translation speed in case of Galilean
89	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
90	! timestep
91	!
92	! 861 2012-03-26 14:18:34Z suehring
93	! Check for topography and ws-scheme removed.
94	! Check for loop_optimization = 'vector' and ws-scheme removed.
95	!
96	! 845 2012-03-07 10:23:05Z maronga
97	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
98	!
99	! 828 2012-02-21 12:00:36Z raasch
100	! check of collision_kernel extended
101	!
102	! 825 2012-02-19 03:03:44Z raasch
103	! check for collision_kernel and curvature_solution_effects
104	!
105	! 809 2012-01-30 13:32:58Z maronga
106	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
107	!
108	! 807 2012-01-25 11:53:51Z maronga
109	! New cpp directive "__check" implemented which is used by check_namelist_files
110	!
111	! 774 2011-10-27 13:34:16Z letzel
112	! bugfix for prescribed u,v-profiles
113	!
114	! 767 2011-10-14 06:39:12Z raasch
115	! Calculating u,v-profiles from given profiles by linear interpolation.
116	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
117	!
118	! 707 2011-03-29 11:39:40Z raasch
119	! setting of bc_lr/ns_dirrad/raddir
120	!
121	! 689 2011-02-20 19:31:12z gryschka
122	! Bugfix for some logical expressions
123	! (syntax was not compatible with all compilers)
124	!
125	! 680 2011-02-04 23:16:06Z gryschka
126	! init_vortex is not allowed with volume_flow_control
127	!
128	! 673 2011-01-18 16:19:48Z suehring
129	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
130	!
131	! 667 2010-12-23 12:06:00Z suehring/gryschka
132	! Exchange of parameters between ocean and atmosphere via PE0
133	! Check for illegal combination of ws-scheme and timestep scheme.
134	! Check for topography and ws-scheme.
135	! Check for not cyclic boundary conditions in combination with ws-scheme and
136	! loop_optimization = 'vector'.
137	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
138	! Different processor/grid topology in atmosphere and ocean is now allowed!
139	! Bugfixes in checking for conserve_volume_flow_mode
140	! 600 2010-11-24 16:10:51Z raasch
141	! change due to new default value of surface_waterflux
142	! 580 2010-10-05 13:59:11Z heinze
143	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
144	!
145	! 567 2010-10-01 10:46:30Z helmke
146	! calculating masks changed
147	!
148	! 564 2010-09-30 13:18:59Z helmke
149	! palm message identifiers of masked output changed, 20 replaced by max_masks
150	!
151	! 553 2010-09-01 14:09:06Z weinreis
152	! masks is calculated and removed from inipar
153	!
154	! 531 2010-04-21 06:47:21Z heinze
155	! Bugfix: unit of hyp changed to dbar
156	!
157	! 524 2010-03-30 02:04:51Z raasch
158	! Bugfix: "/" in netcdf profile variable names replaced by ":"
159	!
160	! 493 2010-03-01 08:30:24Z raasch
161	! netcdf_data_format is checked
162	!
163	! 411 2009-12-11 14:15:58Z heinze
164	! Enabled passive scalar/humidity wall fluxes for non-flat topography
165	! Initialization of large scale vertical motion (subsidence/ascent)
166	!
167	! 410 2009-12-04 17:05:40Z letzel
168	! masked data output
169	!
170	! 388 2009-09-23 09:40:33Z raasch
171	! Check profiles fpr prho and hyp.
172	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
173	! interval has been set, respective error message is included
174	! bc_lr_cyc and bc_ns_cyc are set,
175	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
176	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
177	! Coupling with independent precursor runs.
178	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
179	! Bugfix: pressure included for profile output
180	! Check pressure gradient conditions
181	! topography_grid_convention moved from user_check_parameters
182	! 'single_street_canyon'
183	! Added shf* and qsws* to the list of available output data
184	!
185	! 222 2009-01-12 16:04:16Z letzel
186	! +user_check_parameters
187	! Output of messages replaced by message handling routine.
188	! Implementation of an MPI-1 coupling: replaced myid with target_id,
189	! deleted __mpi2 directives
190	! Check that PALM is called with mrun -K parallel for coupling
191	!
192	! 197 2008-09-16 15:29:03Z raasch
193	! Bug fix: Construction of vertical profiles when 10 gradients have been
194	! specified in the parameter list (ug, vg, pt, q, sa, lad)
195	!
196	! Strict grid matching along z is not needed for mg-solver.
197	! Leaf area density (LAD) explicitly set to its surface value at k=0
198	! Case of reading data for recycling included in initializing_actions,
199	! check of turbulent_inflow and calculation of recycling_plane.
200	! q*2 profile added
201	!
202	! 138 2007-11-28 10:03:58Z letzel
203	! Plant canopy added
204	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
205	! Multigrid solver allows topography, checking of dt_sort_particles
206	! Bugfix: initializing u_init and v_init in case of ocean runs
207	!
208	! 109 2007-08-28 15:26:47Z letzel
209	! Check coupling_mode and set default (obligatory) values (like boundary
210	! conditions for temperature and fluxes) in case of coupled runs.
211	! +profiles for wp and w"e
212	! Bugfix: Error message concerning output of particle concentration (pc)
213	! modified
214	! More checks and more default values for coupled runs
215	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
216	! cloud_physics = .T.)
217	! Rayleigh damping for ocean fixed.
218	! Check and, if necessary, set default value for dt_coupling
219	!
220	! 97 2007-06-21 08:23:15Z raasch
221	! Initial salinity profile is calculated, salinity boundary conditions are
222	! checked,
223	! z_max_do1d is checked only in case of ocean = .f.,
224	! +initial temperature and geostrophic velocity profiles for the ocean version,
225	! use_pt_reference renamed use_reference
226	!
227	! 89 2007-05-25 12:08:31Z raasch
228	! Check for user-defined profiles
229	!
230	! 75 2007-03-22 09:54:05Z raasch
231	! "by_user" allowed as initializing action, -data_output_ts,
232	! leapfrog with non-flat topography not allowed any more, loop_optimization
233	! and pt_reference are checked, moisture renamed humidity,
234	! output of precipitation amount/rate and roughnes length + check
235	! possible negative humidities are avoided in initial profile,
236	! dirichlet/neumann changed to dirichlet/radiation, etc.,
237	! revision added to run_description_header
238	!
239	! 20 2007-02-26 00:12:32Z raasch
240	! Temperature and humidity gradients at top are now calculated for nzt+1,
241	! top_heatflux and respective boundary condition bc_pt_t is checked
242	!
243	! RCS Log replace by Id keyword, revision history cleaned up
244	!
245	! Revision 1.61 2006/08/04 14:20:25 raasch
246	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
247	! use_upstream_for_tke, default value for dt_dopts,
248	! generation of file header moved from routines palm and header to here
249	!
250	! Revision 1.1 1997/08/26 06:29:23 raasch
251	! Initial revision
252	!
253	!
254	! Description:
255	! ------------
256	! Check control parameters and deduce further quantities.
257	!------------------------------------------------------------------------------!
258
259	USE arrays_3d
260	USE cloud_parameters
261	USE constants
262	USE control_parameters
263	USE dvrp_variables
264	USE grid_variables
265	USE indices
266	USE model_1d
267	USE netcdf_control
268	USE particle_attributes
269	USE pegrid
270	USE profil_parameter
271	USE subsidence_mod
272	USE statistics
273	USE transpose_indices
274
275	IMPLICIT NONE
276
277	CHARACTER (LEN=1) :: sq
278	CHARACTER (LEN=6) :: var
279	CHARACTER (LEN=7) :: unit
280	CHARACTER (LEN=8) :: date
281	CHARACTER (LEN=10) :: time
282	CHARACTER (LEN=40) :: coupling_string
283	CHARACTER (LEN=100) :: action
284
285	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
286	position, prec
287	LOGICAL :: found, ldum
288	REAL :: gradient, maxn, maxp, remote = 0.0, &
289	simulation_time_since_reference
290
291	!
292	!-- Warning, if host is not set
293	IF ( host(1:1) == ' ' ) THEN
294	message_string = '"host" is not set. Please check that environment ' // &
295	'variable "localhost" & is set before running PALM'
296	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
297	ENDIF
298
299	!
300	!-- Check the coupling mode
301	IF ( coupling_mode /= 'uncoupled' .AND. &
302	coupling_mode /= 'atmosphere_to_ocean' .AND. &
303	coupling_mode /= 'ocean_to_atmosphere' ) THEN
304	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
305	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
306	ENDIF
307
308	!
309	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
310	IF ( coupling_mode /= 'uncoupled') THEN
311
312	IF ( dt_coupling == 9999999.9 ) THEN
313	message_string = 'dt_coupling is not set but required for coup' // &
314	'ling mode "' // TRIM( coupling_mode ) // '"'
315	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
316	ENDIF
317
318	#if defined( __parallel )
319
320	!
321	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
322	!-- program.
323	!-- check_namelist_files will need the following information of the other
324	!-- model (atmosphere/ocean).
325	! dt_coupling = remote
326	! dt_max = remote
327	! restart_time = remote
328	! dt_restart= remote
329	! simulation_time_since_reference = remote
330	! dx = remote
331
332
333	#if ! defined( __check )
334	IF ( myid == 0 ) THEN
335	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
336	ierr )
337	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
338	status, ierr )
339	ENDIF
340	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
341	#endif
342	IF ( dt_coupling /= remote ) THEN
343	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
344	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
345	'dt_coupling_remote = ', remote
346	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
347	ENDIF
348	IF ( dt_coupling <= 0.0 ) THEN
349	#if ! defined( __check )
350	IF ( myid == 0 ) THEN
351	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
352	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
353	status, ierr )
354	ENDIF
355	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
356	#endif
357	dt_coupling = MAX( dt_max, remote )
358	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
359	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
360	'MAX(dt_max(A,O)) = ', dt_coupling
361	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
362	ENDIF
363	#if ! defined( __check )
364	IF ( myid == 0 ) THEN
365	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
366	ierr )
367	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
368	status, ierr )
369	ENDIF
370	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
371	#endif
372	IF ( restart_time /= remote ) THEN
373	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
374	'": restart_time = ', restart_time, '& is not equal to ', &
375	'restart_time_remote = ', remote
376	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
377	ENDIF
378	#if ! defined( __check )
379	IF ( myid == 0 ) THEN
380	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
381	ierr )
382	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
383	status, ierr )
384	ENDIF
385	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
386	#endif
387	IF ( dt_restart /= remote ) THEN
388	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
389	'": dt_restart = ', dt_restart, '& is not equal to ', &
390	'dt_restart_remote = ', remote
391	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
392	ENDIF
393
394	simulation_time_since_reference = end_time - coupling_start_time
395	#if ! defined( __check )
396	IF ( myid == 0 ) THEN
397	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
398	14, comm_inter, ierr )
399	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
400	status, ierr )
401	ENDIF
402	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
403	#endif
404	IF ( simulation_time_since_reference /= remote ) THEN
405	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
406	'": simulation_time_since_reference = ', &
407	simulation_time_since_reference, '& is not equal to ', &
408	'simulation_time_since_reference_remote = ', remote
409	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
410	ENDIF
411
412	#if ! defined( __check )
413	IF ( myid == 0 ) THEN
414	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
415	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
416	status, ierr )
417	ENDIF
418	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
419
420	#endif
421	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
422
423	IF ( dx < remote ) THEN
424	WRITE( message_string, * ) 'coupling mode "', &
425	TRIM( coupling_mode ), &
426	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
427	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
428	ENDIF
429
430	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
431	WRITE( message_string, * ) 'coupling mode "', &
432	TRIM( coupling_mode ), &
433	'": Domain size in x-direction is not equal in ocean and atmosphere'
434	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
435	ENDIF
436
437	ENDIF
438
439	#if ! defined( __check )
440	IF ( myid == 0) THEN
441	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
442	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
443	status, ierr )
444	ENDIF
445	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
446	#endif
447	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
448
449	IF ( dy < remote ) THEN
450	WRITE( message_string, * ) 'coupling mode "', &
451	TRIM( coupling_mode ), &
452	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
453	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
454	ENDIF
455
456	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
457	WRITE( message_string, * ) 'coupling mode "', &
458	TRIM( coupling_mode ), &
459	'": Domain size in y-direction is not equal in ocean and atmosphere'
460	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
461	ENDIF
462
463	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
464	WRITE( message_string, * ) 'coupling mode "', &
465	TRIM( coupling_mode ), &
466	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
467	' atmosphere'
468	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
469	ENDIF
470
471	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
472	WRITE( message_string, * ) 'coupling mode "', &
473	TRIM( coupling_mode ), &
474	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
475	' atmosphere'
476	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
477	ENDIF
478
479	ENDIF
480	#else
481	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
482	' ''mrun -K parallel'''
483	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
484	#endif
485	ENDIF
486
487	#if defined( __parallel ) && ! defined ( __check )
488	!
489	!-- Exchange via intercommunicator
490	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
491	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
492	ierr )
493	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
494	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
495	comm_inter, status, ierr )
496	ENDIF
497	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
498
499	#endif
500
501
502	!
503	!-- Generate the file header which is used as a header for most of PALM's
504	!-- output files
505	CALL DATE_AND_TIME( date, time )
506	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
507	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
508	IF ( coupling_mode == 'uncoupled' ) THEN
509	coupling_string = ''
510	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
511	coupling_string = ' coupled (atmosphere)'
512	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
513	coupling_string = ' coupled (ocean)'
514	ENDIF
515
516	WRITE ( run_description_header, &
517	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
518	TRIM( version ), TRIM( revision ), 'run: ', &
519	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
520	'host: ', TRIM( host ), run_date, run_time
521
522	!
523	!-- Check the general loop optimization method
524	IF ( loop_optimization == 'default' ) THEN
525	IF ( host(1:3) == 'nec' ) THEN
526	loop_optimization = 'vector'
527	ELSE
528	loop_optimization = 'cache'
529	ENDIF
530	ENDIF
531
532	SELECT CASE ( TRIM( loop_optimization ) )
533
534	CASE ( 'acc', 'cache', 'vector' )
535	CONTINUE
536
537	CASE DEFAULT
538	message_string = 'illegal value given for loop_optimization: "' // &
539	TRIM( loop_optimization ) // '"'
540	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
541
542	END SELECT
543
544	!
545	!-- Check topography setting (check for illegal parameter combinations)
546	IF ( topography /= 'flat' ) THEN
547	action = ' '
548	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
549	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
550	ENDIF
551	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
552	THEN
553	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
554	ENDIF
555	IF ( psolver == 'sor' ) THEN
556	WRITE( action, '(A,A)' ) 'psolver = ', psolver
557	ENDIF
558	IF ( sloping_surface ) THEN
559	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
560	ENDIF
561	IF ( galilei_transformation ) THEN
562	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
563	ENDIF
564	IF ( cloud_droplets ) THEN
565	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE. (has not been tested)'
566	ENDIF
567	IF ( .NOT. prandtl_layer ) THEN
568	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
569	ENDIF
570	IF ( action /= ' ' ) THEN
571	message_string = 'a non-flat topography does not allow ' // &
572	TRIM( action )
573	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
574	ENDIF
575	!
576	!-- In case of non-flat topography, check whether the convention how to
577	!-- define the topography grid has been set correctly, or whether the default
578	!-- is applicable. If this is not possible, abort.
579	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
580	IF ( TRIM( topography ) /= 'single_building' .AND. &
581	TRIM( topography ) /= 'single_street_canyon' .AND. &
582	TRIM( topography ) /= 'read_from_file' ) THEN
583	!-- The default value is not applicable here, because it is only valid
584	!-- for the two standard cases 'single_building' and 'read_from_file'
585	!-- defined in init_grid.
586	WRITE( message_string, * ) &
587	'The value for "topography_grid_convention" ', &
588	'is not set. Its default value is & only valid for ', &
589	'"topography" = ''single_building'', ', &
590	'''single_street_canyon'' & or ''read_from_file''.', &
591	' & Choose ''cell_edge'' or ''cell_center''.'
592	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
593	ELSE
594	!-- The default value is applicable here.
595	!-- Set convention according to topography.
596	IF ( TRIM( topography ) == 'single_building' .OR. &
597	TRIM( topography ) == 'single_street_canyon' ) THEN
598	topography_grid_convention = 'cell_edge'
599	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
600	topography_grid_convention = 'cell_center'
601	ENDIF
602	ENDIF
603	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
604	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
605	WRITE( message_string, * ) &
606	'The value for "topography_grid_convention" is ', &
607	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
608	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
609	ENDIF
610
611	ENDIF
612
613	!
614	!-- Check ocean setting
615	IF ( ocean ) THEN
616
617	action = ' '
618	IF ( action /= ' ' ) THEN
619	message_string = 'ocean = .T. does not allow ' // TRIM( action )
620	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
621	ENDIF
622
623	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
624	TRIM( coupling_char ) == '_O' ) THEN
625
626	!
627	!-- Check whether an (uncoupled) atmospheric run has been declared as an
628	!-- ocean run (this setting is done via mrun-option -y)
629
630	message_string = 'ocean = .F. does not allow coupling_char = "' // &
631	TRIM( coupling_char ) // '" set by mrun-option "-y"'
632	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
633
634	ENDIF
635	!
636	!-- Check cloud scheme
637	IF ( cloud_scheme == 'seifert_beheng' ) THEN
638	icloud_scheme = 0
639	ELSEIF ( cloud_scheme == 'kessler' ) THEN
640	icloud_scheme = 1
641	ELSE
642	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
643	TRIM( cloud_scheme ) // '"'
644	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
645	ENDIF
646	!
647	!-- Check whether there are any illegal values
648	!-- Pressure solver:
649	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
650	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
651	message_string = 'unknown solver for perturbation pressure: psolver' // &
652	' = "' // TRIM( psolver ) // '"'
653	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
654	ENDIF
655
656	#if defined( __parallel )
657	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
658	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
659	'for a 1d domain-decomposition along x & please do' // &
660	' not set npey/=1 in the parameter file'
661	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
662	ENDIF
663	#else
664	IF ( psolver == 'poisfft_hybrid' ) THEN
665	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
666	' for a parallel environment'
667	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
668	ENDIF
669	#endif
670
671	IF ( psolver == 'multigrid' ) THEN
672	IF ( cycle_mg == 'w' ) THEN
673	gamma_mg = 2
674	ELSEIF ( cycle_mg == 'v' ) THEN
675	gamma_mg = 1
676	ELSE
677	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
678	TRIM( cycle_mg ) // '"'
679	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
680	ENDIF
681	ENDIF
682
683	IF ( fft_method /= 'singleton-algorithm' .AND. &
684	fft_method /= 'temperton-algorithm' .AND. &
685	fft_method /= 'system-specific' ) THEN
686	message_string = 'unknown fft-algorithm: fft_method = "' // &
687	TRIM( fft_method ) // '"'
688	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
689	ENDIF
690
691	IF( momentum_advec == 'ws-scheme' .AND. &
692	.NOT. call_psolver_at_all_substeps ) THEN
693	message_string = 'psolver must be called at each RK3 substep when "'//&
694	TRIM(momentum_advec) // ' "is used for momentum_advec'
695	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
696	END IF
697	!
698	!-- Advection schemes:
699	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
700	THEN
701	message_string = 'unknown advection scheme: momentum_advec = "' // &
702	TRIM( momentum_advec ) // '"'
703	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
704	ENDIF
705	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
706	.AND. ( timestep_scheme == 'euler' .OR. &
707	timestep_scheme == 'runge-kutta-2' ) ) &
708	THEN
709	message_string = 'momentum_advec or scalar_advec = "' &
710	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
711	TRIM( timestep_scheme ) // '"'
712	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
713	ENDIF
714	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
715	scalar_advec /= 'bc-scheme' ) &
716	THEN
717	message_string = 'unknown advection scheme: scalar_advec = "' // &
718	TRIM( scalar_advec ) // '"'
719	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
720	ENDIF
721	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
722	THEN
723	message_string = 'advection_scheme scalar_advec = "' &
724	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
725	TRIM( loop_optimization ) // '"'
726	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
727	ENDIF
728
729	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
730	use_upstream_for_tke = .TRUE.
731	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
732	'use_sgs_for_particles = .TRUE.'
733	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
734	ENDIF
735
736	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
737	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
738	'curvature_solution_effects = .TRUE.'
739	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
740	ENDIF
741
742	!
743	!-- Set LOGICAL switches to enhance performance
744	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
745	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
746
747	!
748	!-- Timestep schemes:
749	SELECT CASE ( TRIM( timestep_scheme ) )
750
751	CASE ( 'euler' )
752	intermediate_timestep_count_max = 1
753
754	CASE ( 'runge-kutta-2' )
755	intermediate_timestep_count_max = 2
756
757	CASE ( 'runge-kutta-3' )
758	intermediate_timestep_count_max = 3
759
760	CASE DEFAULT
761	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
762	TRIM( timestep_scheme ) // '"'
763	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
764
765	END SELECT
766
767	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
768	.AND. timestep_scheme(1:5) == 'runge' ) THEN
769	message_string = 'momentum advection scheme "' // &
770	TRIM( momentum_advec ) // '" & does not work with ' // &
771	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
772	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
773	ENDIF
774
775	!
776	!-- Collision kernels:
777	SELECT CASE ( TRIM( collision_kernel ) )
778
779	CASE ( 'hall', 'hall_fast' )
780	hall_kernel = .TRUE.
781
782	CASE ( 'palm' )
783	palm_kernel = .TRUE.
784
785	CASE ( 'wang', 'wang_fast' )
786	wang_kernel = .TRUE.
787
788	CASE ( 'none' )
789
790
791	CASE DEFAULT
792	message_string = 'unknown collision kernel: collision_kernel = "' // &
793	TRIM( collision_kernel ) // '"'
794	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
795
796	END SELECT
797	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
798
799	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
800	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
801	!
802	!-- No restart run: several initialising actions are possible
803	action = initializing_actions
804	DO WHILE ( TRIM( action ) /= '' )
805	position = INDEX( action, ' ' )
806	SELECT CASE ( action(1:position-1) )
807
808	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
809	'by_user', 'initialize_vortex', 'initialize_ptanom' )
810	action = action(position+1:)
811
812	CASE DEFAULT
813	message_string = 'initializing_action = "' // &
814	TRIM( action ) // '" unkown or not allowed'
815	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
816
817	END SELECT
818	ENDDO
819	ENDIF
820
821	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
822	conserve_volume_flow ) THEN
823	message_string = 'initializing_actions = "initialize_vortex"' // &
824	' ist not allowed with conserve_volume_flow = .T.'
825	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
826	ENDIF
827
828
829	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
830	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
831	message_string = 'initializing_actions = "set_constant_profiles"' // &
832	' and "set_1d-model_profiles" are not allowed ' // &
833	'simultaneously'
834	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
835	ENDIF
836
837	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
838	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
839	message_string = 'initializing_actions = "set_constant_profiles"' // &
840	' and "by_user" are not allowed simultaneously'
841	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
842	ENDIF
843
844	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
845	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
846	message_string = 'initializing_actions = "by_user" and ' // &
847	'"set_1d-model_profiles" are not allowed simultaneously'
848	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
849	ENDIF
850
851	IF ( cloud_physics .AND. .NOT. humidity ) THEN
852	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
853	'not allowed with humidity = ', humidity
854	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
855	ENDIF
856
857	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
858	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
859	'not allowed with cloud_physics = ', cloud_physics
860	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
861	ENDIF
862
863	IF ( humidity .AND. sloping_surface ) THEN
864	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
865	'are not allowed simultaneously'
866	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
867	ENDIF
868
869	IF ( passive_scalar .AND. humidity ) THEN
870	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
871	'is not allowed simultaneously'
872	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
873	ENDIF
874
875	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
876	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
877	'coefficient & given value is drag_coefficient = 0.0'
878	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
879	ENDIF
880
881	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
882	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
883	' seifert_beheng'
884	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
885	ENDIF
886
887	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
888	icloud_scheme == 0 ) THEN
889	message_string = 'cloud_scheme = seifert_beheng requires ' // &
890	'loop_optimization = cache'
891	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
892	ENDIF
893
894	IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
895	.NOT. precipitation ) THEN
896	message_string = 'cloud_scheme = seifert_beheng requires ' // &
897	'precipitation = .TRUE.'
898	CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
899	ENDIF
900
901	!
902	!-- In case of no model continuation run, check initialising parameters and
903	!-- deduce further quantities
904	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
905
906	!
907	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
908	pt_init = pt_surface
909	IF ( humidity ) THEN
910	q_init = q_surface
911	!
912	!-- It is not allowed to choose initial profiles of rain water content
913	!-- and rain drop concentration. They are set to 0.0.
914	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
915	qr_init = 0.0
916	nr_init = 0.0
917	ENDIF
918	ENDIF
919	IF ( ocean ) sa_init = sa_surface
920	IF ( passive_scalar ) q_init = s_surface
921	IF ( plant_canopy ) lad = 0.0
922
923	!
924	!--
925	!-- If required, compute initial profile of the geostrophic wind
926	!-- (component ug)
927	i = 1
928	gradient = 0.0
929
930	IF ( .NOT. ocean ) THEN
931
932	ug_vertical_gradient_level_ind(1) = 0
933	ug(0) = ug_surface
934	DO k = 1, nzt+1
935	IF ( i < 11 ) THEN
936	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
937	ug_vertical_gradient_level(i) >= 0.0 ) THEN
938	gradient = ug_vertical_gradient(i) / 100.0
939	ug_vertical_gradient_level_ind(i) = k - 1
940	i = i + 1
941	ENDIF
942	ENDIF
943	IF ( gradient /= 0.0 ) THEN
944	IF ( k /= 1 ) THEN
945	ug(k) = ug(k-1) + dzu(k) * gradient
946	ELSE
947	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
948	ENDIF
949	ELSE
950	ug(k) = ug(k-1)
951	ENDIF
952	ENDDO
953
954	ELSE
955
956	ug_vertical_gradient_level_ind(1) = nzt+1
957	ug(nzt+1) = ug_surface
958	DO k = nzt, nzb, -1
959	IF ( i < 11 ) THEN
960	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
961	ug_vertical_gradient_level(i) <= 0.0 ) THEN
962	gradient = ug_vertical_gradient(i) / 100.0
963	ug_vertical_gradient_level_ind(i) = k + 1
964	i = i + 1
965	ENDIF
966	ENDIF
967	IF ( gradient /= 0.0 ) THEN
968	IF ( k /= nzt ) THEN
969	ug(k) = ug(k+1) - dzu(k+1) * gradient
970	ELSE
971	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
972	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
973	ENDIF
974	ELSE
975	ug(k) = ug(k+1)
976	ENDIF
977	ENDDO
978
979	ENDIF
980
981	!
982	!-- In case of no given gradients for ug, choose a zero gradient
983	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
984	ug_vertical_gradient_level(1) = 0.0
985	ENDIF
986
987	!
988	!--
989	!-- If required, compute initial profile of the geostrophic wind
990	!-- (component vg)
991	i = 1
992	gradient = 0.0
993
994	IF ( .NOT. ocean ) THEN
995
996	vg_vertical_gradient_level_ind(1) = 0
997	vg(0) = vg_surface
998	DO k = 1, nzt+1
999	IF ( i < 11 ) THEN
1000	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1001	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1002	gradient = vg_vertical_gradient(i) / 100.0
1003	vg_vertical_gradient_level_ind(i) = k - 1
1004	i = i + 1
1005	ENDIF
1006	ENDIF
1007	IF ( gradient /= 0.0 ) THEN
1008	IF ( k /= 1 ) THEN
1009	vg(k) = vg(k-1) + dzu(k) * gradient
1010	ELSE
1011	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
1012	ENDIF
1013	ELSE
1014	vg(k) = vg(k-1)
1015	ENDIF
1016	ENDDO
1017
1018	ELSE
1019
1020	vg_vertical_gradient_level_ind(1) = nzt+1
1021	vg(nzt+1) = vg_surface
1022	DO k = nzt, nzb, -1
1023	IF ( i < 11 ) THEN
1024	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1025	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1026	gradient = vg_vertical_gradient(i) / 100.0
1027	vg_vertical_gradient_level_ind(i) = k + 1
1028	i = i + 1
1029	ENDIF
1030	ENDIF
1031	IF ( gradient /= 0.0 ) THEN
1032	IF ( k /= nzt ) THEN
1033	vg(k) = vg(k+1) - dzu(k+1) * gradient
1034	ELSE
1035	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1036	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1037	ENDIF
1038	ELSE
1039	vg(k) = vg(k+1)
1040	ENDIF
1041	ENDDO
1042
1043	ENDIF
1044
1045	!
1046	!-- In case of no given gradients for vg, choose a zero gradient
1047	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1048	vg_vertical_gradient_level(1) = 0.0
1049	ENDIF
1050
1051	!
1052	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1053	!-- interpolate them from wind profile data (if given)
1054	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1055
1056	u_init = ug
1057	v_init = vg
1058
1059	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1060
1061	IF ( uv_heights(1) /= 0.0 ) THEN
1062	message_string = 'uv_heights(1) must be 0.0'
1063	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1064	ENDIF
1065
1066	use_prescribed_profile_data = .TRUE.
1067
1068	kk = 1
1069	u_init(0) = 0.0
1070	v_init(0) = 0.0
1071
1072	DO k = 1, nz+1
1073
1074	IF ( kk < 100 ) THEN
1075	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1076	kk = kk + 1
1077	IF ( kk == 100 ) EXIT
1078	ENDDO
1079	ENDIF
1080
1081	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1082	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1083	( uv_heights(kk+1) - uv_heights(kk) ) * &
1084	( u_profile(kk+1) - u_profile(kk) )
1085	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1086	( uv_heights(kk+1) - uv_heights(kk) ) * &
1087	( v_profile(kk+1) - v_profile(kk) )
1088	ELSE
1089	u_init(k) = u_profile(kk)
1090	v_init(k) = v_profile(kk)
1091	ENDIF
1092
1093	ENDDO
1094
1095	ELSE
1096
1097	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1098	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1099
1100	ENDIF
1101
1102	!
1103	!-- Compute initial temperature profile using the given temperature gradients
1104	IF ( .NOT. neutral ) THEN
1105
1106	i = 1
1107	gradient = 0.0
1108
1109	IF ( .NOT. ocean ) THEN
1110
1111	pt_vertical_gradient_level_ind(1) = 0
1112	DO k = 1, nzt+1
1113	IF ( i < 11 ) THEN
1114	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1115	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1116	gradient = pt_vertical_gradient(i) / 100.0
1117	pt_vertical_gradient_level_ind(i) = k - 1
1118	i = i + 1
1119	ENDIF
1120	ENDIF
1121	IF ( gradient /= 0.0 ) THEN
1122	IF ( k /= 1 ) THEN
1123	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1124	ELSE
1125	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
1126	ENDIF
1127	ELSE
1128	pt_init(k) = pt_init(k-1)
1129	ENDIF
1130	ENDDO
1131
1132	ELSE
1133
1134	pt_vertical_gradient_level_ind(1) = nzt+1
1135	DO k = nzt, 0, -1
1136	IF ( i < 11 ) THEN
1137	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1138	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1139	gradient = pt_vertical_gradient(i) / 100.0
1140	pt_vertical_gradient_level_ind(i) = k + 1
1141	i = i + 1
1142	ENDIF
1143	ENDIF
1144	IF ( gradient /= 0.0 ) THEN
1145	IF ( k /= nzt ) THEN
1146	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1147	ELSE
1148	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1149	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1150	ENDIF
1151	ELSE
1152	pt_init(k) = pt_init(k+1)
1153	ENDIF
1154	ENDDO
1155
1156	ENDIF
1157
1158	ENDIF
1159
1160	!
1161	!-- In case of no given temperature gradients, choose gradient of neutral
1162	!-- stratification
1163	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1164	pt_vertical_gradient_level(1) = 0.0
1165	ENDIF
1166
1167	!
1168	!-- Store temperature gradient at the top boundary for possible Neumann
1169	!-- boundary condition
1170	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1171
1172	!
1173	!-- If required, compute initial humidity or scalar profile using the given
1174	!-- humidity/scalar gradient. In case of scalar transport, initially store
1175	!-- values of the scalar parameters on humidity parameters
1176	IF ( passive_scalar ) THEN
1177	bc_q_b = bc_s_b
1178	bc_q_t = bc_s_t
1179	q_surface = s_surface
1180	q_surface_initial_change = s_surface_initial_change
1181	q_vertical_gradient = s_vertical_gradient
1182	q_vertical_gradient_level = s_vertical_gradient_level
1183	surface_waterflux = surface_scalarflux
1184	wall_humidityflux = wall_scalarflux
1185	ENDIF
1186
1187	IF ( humidity .OR. passive_scalar ) THEN
1188
1189	i = 1
1190	gradient = 0.0
1191	q_vertical_gradient_level_ind(1) = 0
1192	DO k = 1, nzt+1
1193	IF ( i < 11 ) THEN
1194	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1195	q_vertical_gradient_level(i) >= 0.0 ) THEN
1196	gradient = q_vertical_gradient(i) / 100.0
1197	q_vertical_gradient_level_ind(i) = k - 1
1198	i = i + 1
1199	ENDIF
1200	ENDIF
1201	IF ( gradient /= 0.0 ) THEN
1202	IF ( k /= 1 ) THEN
1203	q_init(k) = q_init(k-1) + dzu(k) * gradient
1204	ELSE
1205	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1206	ENDIF
1207	ELSE
1208	q_init(k) = q_init(k-1)
1209	ENDIF
1210	!
1211	!-- Avoid negative humidities
1212	IF ( q_init(k) < 0.0 ) THEN
1213	q_init(k) = 0.0
1214	ENDIF
1215	ENDDO
1216
1217	!
1218	!-- In case of no given humidity gradients, choose zero gradient
1219	!-- conditions
1220	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1221	q_vertical_gradient_level(1) = 0.0
1222	ENDIF
1223
1224	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1225
1226	i = 1
1227	gradient = 0.0
1228	qr_vertical_gradient_level_ind(1) = 0
1229	DO k = 1, nzt+1
1230	IF ( i < 11 ) THEN
1231	IF ( qr_vertical_gradient_level(i) < zu(k) .AND. &
1232	qr_vertical_gradient_level(i) >= 0.0 ) THEN
1233	gradient = qr_vertical_gradient(i) / 100.0
1234	qr_vertical_gradient_level_ind(i) = k - 1
1235	i = i + 1
1236	ENDIF
1237	ENDIF
1238	IF ( gradient /= 0.0 ) THEN
1239	IF ( k /= 1 ) THEN
1240	qr_init(k) = qr_init(k-1) + dzu(k) * gradient
1241	ELSE
1242	qr_init(k) = qr_init(k-1) + 0.5 * dzu(k) * gradient
1243	ENDIF
1244	ELSE
1245	qr_init(k) = qr_init(k-1)
1246	ENDIF
1247	!
1248	!-- Avoid negative rain water content
1249	IF ( qr_init(k) < 0.0 ) THEN
1250	qr_init(k) = 0.0
1251	ENDIF
1252	ENDDO
1253	!
1254	!-- In case of no given rain water content gradients, choose zero gradient
1255	!-- conditions
1256	IF ( qr_vertical_gradient_level(1) == -1.0 ) THEN
1257	qr_vertical_gradient_level(1) = 0.0
1258	ENDIF
1259
1260	i = 1
1261	gradient = 0.0
1262	nr_vertical_gradient_level_ind(1) = 0
1263	DO k = 1, nzt+1
1264	IF ( i < 11 ) THEN
1265	IF ( nr_vertical_gradient_level(i) < zu(k) .AND. &
1266	nr_vertical_gradient_level(i) >= 0.0 ) THEN
1267	gradient = nr_vertical_gradient(i) / 100.0
1268	nr_vertical_gradient_level_ind(i) = k - 1
1269	i = i + 1
1270	ENDIF
1271	ENDIF
1272	IF ( gradient /= 0.0 ) THEN
1273	IF ( k /= 1 ) THEN
1274	nr_init(k) = nr_init(k-1) + dzu(k) * gradient
1275	ELSE
1276	nr_init(k) = nr_init(k-1) + 0.5 * dzu(k) * gradient
1277	ENDIF
1278	ELSE
1279	nr_init(k) = nr_init(k-1)
1280	ENDIF
1281	!
1282	!-- Avoid negative rain water content
1283	IF ( nr_init(k) < 0.0 ) THEN
1284	nr_init(k) = 0.0
1285	ENDIF
1286	ENDDO
1287	!
1288	!-- In case of no given rain water content gradients, choose zero gradient
1289	!-- conditions
1290	IF ( nr_vertical_gradient_level(1) == -1.0 ) THEN
1291	nr_vertical_gradient_level(1) = 0.0
1292	ENDIF
1293
1294	ENDIF
1295	!
1296	!-- Store humidity, rain water content and rain drop concentration
1297	!-- gradient at the top boundary for possile Neumann boundary condition
1298	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1299
1300	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1301	bc_qr_t_val = ( qr_init(nzt+1) - qr_init(nzt) ) / dzu(nzt+1)
1302	bc_nr_t_val = ( nr_init(nzt+1) - nr_init(nzt) ) / dzu(nzt+1)
1303	ENDIF
1304
1305	ENDIF
1306
1307	!
1308	!-- If required, compute initial salinity profile using the given salinity
1309	!-- gradients
1310	IF ( ocean ) THEN
1311
1312	i = 1
1313	gradient = 0.0
1314
1315	sa_vertical_gradient_level_ind(1) = nzt+1
1316	DO k = nzt, 0, -1
1317	IF ( i < 11 ) THEN
1318	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1319	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1320	gradient = sa_vertical_gradient(i) / 100.0
1321	sa_vertical_gradient_level_ind(i) = k + 1
1322	i = i + 1
1323	ENDIF
1324	ENDIF
1325	IF ( gradient /= 0.0 ) THEN
1326	IF ( k /= nzt ) THEN
1327	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1328	ELSE
1329	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1330	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1331	ENDIF
1332	ELSE
1333	sa_init(k) = sa_init(k+1)
1334	ENDIF
1335	ENDDO
1336
1337	ENDIF
1338
1339	!
1340	!-- If required compute the profile of leaf area density used in the plant
1341	!-- canopy model
1342	IF ( plant_canopy ) THEN
1343
1344	i = 1
1345	gradient = 0.0
1346
1347	IF ( .NOT. ocean ) THEN
1348
1349	lad(0) = lad_surface
1350
1351	lad_vertical_gradient_level_ind(1) = 0
1352	DO k = 1, pch_index
1353	IF ( i < 11 ) THEN
1354	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1355	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1356	gradient = lad_vertical_gradient(i)
1357	lad_vertical_gradient_level_ind(i) = k - 1
1358	i = i + 1
1359	ENDIF
1360	ENDIF
1361	IF ( gradient /= 0.0 ) THEN
1362	IF ( k /= 1 ) THEN
1363	lad(k) = lad(k-1) + dzu(k) * gradient
1364	ELSE
1365	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1366	ENDIF
1367	ELSE
1368	lad(k) = lad(k-1)
1369	ENDIF
1370	ENDDO
1371
1372	ENDIF
1373
1374	!
1375	!-- In case of no given leaf area density gradients, choose a vanishing
1376	!-- gradient
1377	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1378	lad_vertical_gradient_level(1) = 0.0
1379	ENDIF
1380
1381	ENDIF
1382
1383	ENDIF
1384
1385	!
1386	!-- Initialize large scale subsidence if required
1387	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1388	large_scale_subsidence = .TRUE.
1389	CALL init_w_subsidence
1390	END IF
1391
1392
1393
1394	!
1395	!-- Compute Coriolis parameter
1396	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1397	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1398
1399	!
1400	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1401	!-- set the reference temperature equal to the surface temperature.
1402	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1403
1404	!
1405	!-- Reference value has to be used in buoyancy terms
1406	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1407
1408	!
1409	!-- Sign of buoyancy/stability terms
1410	IF ( ocean ) atmos_ocean_sign = -1.0
1411
1412	!
1413	!-- Ocean version must use flux boundary conditions at the top
1414	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1415	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1416	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1417	ENDIF
1418
1419	!
1420	!-- In case of a given slope, compute the relevant quantities
1421	IF ( alpha_surface /= 0.0 ) THEN
1422	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1423	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1424	' ) must be < 90.0'
1425	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1426	ENDIF
1427	sloping_surface = .TRUE.
1428	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1429	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1430	ENDIF
1431
1432	!
1433	!-- Check time step and cfl_factor
1434	IF ( dt /= -1.0 ) THEN
1435	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1436	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1437	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1438	ENDIF
1439	dt_3d = dt
1440	dt_fixed = .TRUE.
1441	ENDIF
1442
1443	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1444	IF ( cfl_factor == -1.0 ) THEN
1445	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1446	cfl_factor = 0.8
1447	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1448	cfl_factor = 0.9
1449	ELSE
1450	cfl_factor = 0.9
1451	ENDIF
1452	ELSE
1453	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1454	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1455	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1456	ENDIF
1457	ENDIF
1458
1459	!
1460	!-- Store simulated time at begin
1461	simulated_time_at_begin = simulated_time
1462
1463	!
1464	!-- Store reference time for coupled runs and change the coupling flag,
1465	!-- if ...
1466	IF ( simulated_time == 0.0 ) THEN
1467	IF ( coupling_start_time == 0.0 ) THEN
1468	time_since_reference_point = 0.0
1469	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1470	run_coupled = .FALSE.
1471	ENDIF
1472	ENDIF
1473
1474	!
1475	!-- Set wind speed in the Galilei-transformed system
1476	IF ( galilei_transformation ) THEN
1477	IF ( use_ug_for_galilei_tr .AND. &
1478	ug_vertical_gradient_level(1) == 0.0 .AND. &
1479	ug_vertical_gradient(1) == 0.0 .AND. &
1480	vg_vertical_gradient_level(1) == 0.0 .AND. &
1481	vg_vertical_gradient(1) == 0.0 ) THEN
1482	u_gtrans = ug_surface * 0.6
1483	v_gtrans = vg_surface * 0.6
1484	ELSEIF ( use_ug_for_galilei_tr .AND. &
1485	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1486	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1487	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1488	' with galilei transformation'
1489	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1490	ELSEIF ( use_ug_for_galilei_tr .AND. &
1491	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1492	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1493	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1494	' with galilei transformation'
1495	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1496	ELSE
1497	message_string = 'variable translation speed used for galilei-' // &
1498	'transformation, which may cause & instabilities in stably ' // &
1499	'stratified regions'
1500	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1501	ENDIF
1502	ENDIF
1503
1504	!
1505	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1506	!-- fluxes have to be used in the diffusion-terms
1507	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1508
1509	!
1510	!-- Check boundary conditions and set internal variables:
1511	!-- Lateral boundary conditions
1512	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1513	bc_lr /= 'radiation/dirichlet' .AND. bc_lr /= 'dirichlet/neumann' &
1514	.AND. bc_lr /= 'neumann/dirichlet' ) THEN
1515	message_string = 'unknown boundary condition: bc_lr = "' // &
1516	TRIM( bc_lr ) // '"'
1517	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1518	ENDIF
1519	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1520	bc_ns /= 'radiation/dirichlet' .AND. bc_ns /= 'dirichlet/neumann' &
1521	.AND. bc_ns /= 'neumann/dirichlet' ) THEN
1522	message_string = 'unknown boundary condition: bc_ns = "' // &
1523	TRIM( bc_ns ) // '"'
1524	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1525	ENDIF
1526
1527	!
1528	!-- Internal variables used for speed optimization in if clauses
1529	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1530	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1531	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1532	IF ( bc_lr == 'dirichlet/neumann' ) bc_lr_dirneu = .TRUE.
1533	IF ( bc_lr == 'neumann/dirichlet' ) bc_lr_neudir = .TRUE.
1534	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1535	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1536	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1537	IF ( bc_ns == 'dirichlet/neumann' ) bc_ns_dirneu = .TRUE.
1538	IF ( bc_ns == 'neumann/dirichlet' ) bc_ns_neudir = .TRUE.
1539
1540	!
1541	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1542	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1543	!-- and tools do not work with non-cyclic boundary conditions.
1544	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1545	IF ( psolver /= 'multigrid' ) THEN
1546	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1547	'psolver = "' // TRIM( psolver ) // '"'
1548	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1549	ENDIF
1550	IF ( momentum_advec /= 'pw-scheme' .AND. &
1551	momentum_advec /= 'ws-scheme') THEN
1552	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1553	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1554	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1555	ENDIF
1556	IF ( scalar_advec /= 'pw-scheme' .AND. &
1557	scalar_advec /= 'ws-scheme' ) THEN
1558	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1559	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1560	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1561	ENDIF
1562	IF ( galilei_transformation ) THEN
1563	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1564	'galilei_transformation = .T.'
1565	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1566	ENDIF
1567	ENDIF
1568
1569	!
1570	!-- Bottom boundary condition for the turbulent Kinetic energy
1571	IF ( bc_e_b == 'neumann' ) THEN
1572	ibc_e_b = 1
1573	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1574	ibc_e_b = 2
1575	IF ( prandtl_layer ) THEN
1576	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1577	TRIM( bc_e_b ) // '"'
1578	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1579	ENDIF
1580	IF ( .NOT. prandtl_layer ) THEN
1581	bc_e_b = 'neumann'
1582	ibc_e_b = 1
1583	message_string = 'boundary condition bc_e_b changed to "' // &
1584	TRIM( bc_e_b ) // '"'
1585	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1586	ENDIF
1587	ELSE
1588	message_string = 'unknown boundary condition: bc_e_b = "' // &
1589	TRIM( bc_e_b ) // '"'
1590	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1591	ENDIF
1592
1593	!
1594	!-- Boundary conditions for perturbation pressure
1595	IF ( bc_p_b == 'dirichlet' ) THEN
1596	ibc_p_b = 0
1597	ELSEIF ( bc_p_b == 'neumann' ) THEN
1598	ibc_p_b = 1
1599	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1600	ibc_p_b = 2
1601	ELSE
1602	message_string = 'unknown boundary condition: bc_p_b = "' // &
1603	TRIM( bc_p_b ) // '"'
1604	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1605	ENDIF
1606	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1607	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1608	'" not allowed with prandtl_layer = .FALSE.'
1609	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1610	ENDIF
1611	IF ( bc_p_t == 'dirichlet' ) THEN
1612	ibc_p_t = 0
1613	ELSEIF ( bc_p_t == 'neumann' ) THEN
1614	ibc_p_t = 1
1615	ELSE
1616	message_string = 'unknown boundary condition: bc_p_t = "' // &
1617	TRIM( bc_p_t ) // '"'
1618	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1619	ENDIF
1620
1621	!
1622	!-- Boundary conditions for potential temperature
1623	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1624	ibc_pt_b = 2
1625	ELSE
1626	IF ( bc_pt_b == 'dirichlet' ) THEN
1627	ibc_pt_b = 0
1628	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1629	ibc_pt_b = 1
1630	ELSE
1631	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1632	TRIM( bc_pt_b ) // '"'
1633	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1634	ENDIF
1635	ENDIF
1636
1637	IF ( bc_pt_t == 'dirichlet' ) THEN
1638	ibc_pt_t = 0
1639	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1640	ibc_pt_t = 1
1641	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1642	ibc_pt_t = 2
1643	ELSE
1644	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1645	TRIM( bc_pt_t ) // '"'
1646	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1647	ENDIF
1648
1649	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1650	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1651
1652	IF ( neutral ) THEN
1653
1654	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1655	THEN
1656	message_string = 'heatflux must not be set for pure neutral flow'
1657	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1658	ENDIF
1659
1660	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1661	THEN
1662	message_string = 'heatflux must not be set for pure neutral flow'
1663	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1664	ENDIF
1665
1666	ENDIF
1667
1668	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1669	top_momentumflux_v /= 9999999.9 ) THEN
1670	constant_top_momentumflux = .TRUE.
1671	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1672	top_momentumflux_v == 9999999.9 ) ) THEN
1673	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1674	'must be set'
1675	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1676	ENDIF
1677
1678	!
1679	!-- A given surface temperature implies Dirichlet boundary condition for
1680	!-- temperature. In this case specification of a constant heat flux is
1681	!-- forbidden.
1682	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1683	surface_heatflux /= 0.0 ) THEN
1684	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1685	'& is not allowed with constant_heatflux = .TRUE.'
1686	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1687	ENDIF
1688	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1689	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1690	'wed with pt_surface_initial_change (/=0) = ', &
1691	pt_surface_initial_change
1692	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1693	ENDIF
1694
1695	!
1696	!-- A given temperature at the top implies Dirichlet boundary condition for
1697	!-- temperature. In this case specification of a constant heat flux is
1698	!-- forbidden.
1699	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1700	top_heatflux /= 0.0 ) THEN
1701	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1702	'" is not allowed with constant_top_heatflux = .TRUE.'
1703	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1704	ENDIF
1705
1706	!
1707	!-- Boundary conditions for salinity
1708	IF ( ocean ) THEN
1709	IF ( bc_sa_t == 'dirichlet' ) THEN
1710	ibc_sa_t = 0
1711	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1712	ibc_sa_t = 1
1713	ELSE
1714	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1715	TRIM( bc_sa_t ) // '"'
1716	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1717	ENDIF
1718
1719	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1720	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1721	message_string = 'boundary condition: bc_sa_t = "' // &
1722	TRIM( bc_sa_t ) // '" requires to set ' // &
1723	'top_salinityflux'
1724	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1725	ENDIF
1726
1727	!
1728	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1729	!-- salinity. In this case specification of a constant salinity flux is
1730	!-- forbidden.
1731	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1732	top_salinityflux /= 0.0 ) THEN
1733	message_string = 'boundary condition: bc_sa_t = "' // &
1734	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1735	'constant_top_salinityflux = .TRUE.'
1736	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1737	ENDIF
1738
1739	ENDIF
1740
1741	!
1742	!-- In case of humidity or passive scalar, set boundary conditions for total
1743	!-- water content / scalar
1744	IF ( humidity .OR. passive_scalar ) THEN
1745	IF ( humidity ) THEN
1746	sq = 'q'
1747	ELSE
1748	sq = 's'
1749	ENDIF
1750	IF ( bc_q_b == 'dirichlet' ) THEN
1751	ibc_q_b = 0
1752	ELSEIF ( bc_q_b == 'neumann' ) THEN
1753	ibc_q_b = 1
1754	ELSE
1755	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1756	'_b ="' // TRIM( bc_q_b ) // '"'
1757	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1758	ENDIF
1759	IF ( bc_q_t == 'dirichlet' ) THEN
1760	ibc_q_t = 0
1761	ELSEIF ( bc_q_t == 'neumann' ) THEN
1762	ibc_q_t = 1
1763	ELSE
1764	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1765	'_t ="' // TRIM( bc_q_t ) // '"'
1766	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1767	ENDIF
1768
1769	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1770
1771	!
1772	!-- A given surface humidity implies Dirichlet boundary condition for
1773	!-- humidity. In this case specification of a constant water flux is
1774	!-- forbidden.
1775	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1776	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1777	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1778	'th prescribed surface flux'
1779	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1780	ENDIF
1781	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1782	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1783	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1784	q_surface_initial_change
1785	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1786	ENDIF
1787
1788	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1789	IF ( bc_qr_b == 'dirichlet' ) THEN
1790	ibc_qr_b = 0
1791	ELSEIF ( bc_qr_b == 'neumann' ) THEN
1792	ibc_qr_b = 1
1793	ELSE
1794	message_string = 'unknown boundary condition: bc_qr_b ="' // &
1795	TRIM( bc_qr_b ) // '"'
1796	CALL message( 'check_parameters', 'PA0352', 1, 2, 0, 6, 0 )
1797	ENDIF
1798	IF ( bc_qr_t == 'dirichlet' ) THEN
1799	ibc_qr_t = 0
1800	ELSEIF ( bc_qr_t == 'neumann' ) THEN
1801	ibc_qr_t = 1
1802	ELSE
1803	message_string = 'unknown boundary condition: bc_qr_t ="' // &
1804	TRIM( bc_qr_t ) // '"'
1805	CALL message( 'check_parameters', 'PA0353', 1, 2, 0, 6, 0 )
1806	ENDIF
1807	IF ( bc_nr_b == 'dirichlet' ) THEN
1808	ibc_nr_b = 0
1809	ELSEIF ( bc_nr_b == 'neumann' ) THEN
1810	ibc_nr_b = 1
1811	ELSE
1812	message_string = 'unknown boundary condition: bc_nr_b ="' // &
1813	TRIM( bc_nr_b ) // '"'
1814	CALL message( 'check_parameters', 'PA0355', 1, 2, 0, 6, 0 )
1815	ENDIF
1816	IF ( bc_nr_t == 'dirichlet' ) THEN
1817	ibc_nr_t = 0
1818	ELSEIF ( bc_nr_t == 'neumann' ) THEN
1819	ibc_nr_t = 1
1820	ELSE
1821	message_string = 'unknown boundary condition: bc_nr_t ="' // &
1822	TRIM( bc_nr_t ) // '"'
1823	CALL message( 'check_parameters', 'PA0356', 1, 2, 0, 6, 0 )
1824	ENDIF
1825	ENDIF
1826
1827	ENDIF
1828
1829	!
1830	!-- Boundary conditions for horizontal components of wind speed
1831	IF ( bc_uv_b == 'dirichlet' ) THEN
1832	ibc_uv_b = 0
1833	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1834	ibc_uv_b = 1
1835	IF ( prandtl_layer ) THEN
1836	message_string = 'boundary condition: bc_uv_b = "' // &
1837	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1838	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1839	ENDIF
1840	ELSE
1841	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1842	TRIM( bc_uv_b ) // '"'
1843	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1844	ENDIF
1845	!
1846	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1847	!-- assigned with the u and v values of the ocean surface
1848	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1849	ibc_uv_b = 2
1850	ENDIF
1851
1852	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1853	bc_uv_t = 'neumann'
1854	ibc_uv_t = 1
1855	ELSE
1856	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1857	ibc_uv_t = 0
1858	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1859	!
1860	!-- Velocities for the initial u,v-profiles are set zero at the top
1861	!-- in case of dirichlet_0 conditions
1862	u_init(nzt+1) = 0.0
1863	v_init(nzt+1) = 0.0
1864	ENDIF
1865	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1866	ibc_uv_t = 1
1867	ELSE
1868	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1869	TRIM( bc_uv_t ) // '"'
1870	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1871	ENDIF
1872	ENDIF
1873
1874	!
1875	!-- Compute and check, respectively, the Rayleigh Damping parameter
1876	IF ( rayleigh_damping_factor == -1.0 ) THEN
1877	rayleigh_damping_factor = 0.0
1878	ELSE
1879	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1880	THEN
1881	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1882	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1883	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1884	ENDIF
1885	ENDIF
1886
1887	IF ( rayleigh_damping_height == -1.0 ) THEN
1888	IF ( .NOT. ocean ) THEN
1889	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1890	ELSE
1891	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1892	ENDIF
1893	ELSE
1894	IF ( .NOT. ocean ) THEN
1895	IF ( rayleigh_damping_height < 0.0 .OR. &
1896	rayleigh_damping_height > zu(nzt) ) THEN
1897	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1898	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1899	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1900	ENDIF
1901	ELSE
1902	IF ( rayleigh_damping_height > 0.0 .OR. &
1903	rayleigh_damping_height < zu(nzb) ) THEN
1904	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1905	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1906	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1907	ENDIF
1908	ENDIF
1909	ENDIF
1910
1911	!
1912	!-- Check number of chosen statistic regions. More than 10 regions are not
1913	!-- allowed, because so far no more than 10 corresponding output files can
1914	!-- be opened (cf. check_open)
1915	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1916	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1917	statistic_regions+1, ' but only 10 regions are allowed'
1918	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1919	ENDIF
1920	IF ( normalizing_region > statistic_regions .OR. &
1921	normalizing_region < 0) THEN
1922	WRITE ( message_string, * ) 'normalizing_region = ', &
1923	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1924	' (value of statistic_regions)'
1925	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1926	ENDIF
1927
1928	!
1929	!-- Check the interval for sorting particles.
1930	!-- Using particles as cloud droplets requires sorting after each timestep.
1931	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1932	dt_sort_particles = 0.0
1933	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1934	'_droplets = .TRUE.'
1935	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1936	ENDIF
1937
1938	!
1939	!-- Set the default intervals for data output, if necessary
1940	!-- NOTE: dt_dosp has already been set in package_parin
1941	IF ( dt_data_output /= 9999999.9 ) THEN
1942	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1943	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1944	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1945	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1946	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1947	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1948	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1949	DO mid = 1, max_masks
1950	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1951	ENDDO
1952	ENDIF
1953
1954	!
1955	!-- Set the default skip time intervals for data output, if necessary
1956	IF ( skip_time_dopr == 9999999.9 ) &
1957	skip_time_dopr = skip_time_data_output
1958	IF ( skip_time_dosp == 9999999.9 ) &
1959	skip_time_dosp = skip_time_data_output
1960	IF ( skip_time_do2d_xy == 9999999.9 ) &
1961	skip_time_do2d_xy = skip_time_data_output
1962	IF ( skip_time_do2d_xz == 9999999.9 ) &
1963	skip_time_do2d_xz = skip_time_data_output
1964	IF ( skip_time_do2d_yz == 9999999.9 ) &
1965	skip_time_do2d_yz = skip_time_data_output
1966	IF ( skip_time_do3d == 9999999.9 ) &
1967	skip_time_do3d = skip_time_data_output
1968	IF ( skip_time_data_output_av == 9999999.9 ) &
1969	skip_time_data_output_av = skip_time_data_output
1970	DO mid = 1, max_masks
1971	IF ( skip_time_domask(mid) == 9999999.9 ) &
1972	skip_time_domask(mid) = skip_time_data_output
1973	ENDDO
1974
1975	!
1976	!-- Check the average intervals (first for 3d-data, then for profiles and
1977	!-- spectra)
1978	IF ( averaging_interval > dt_data_output_av ) THEN
1979	WRITE( message_string, * ) 'averaging_interval = ', &
1980	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1981	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1982	ENDIF
1983
1984	IF ( averaging_interval_pr == 9999999.9 ) THEN
1985	averaging_interval_pr = averaging_interval
1986	ENDIF
1987
1988	IF ( averaging_interval_pr > dt_dopr ) THEN
1989	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1990	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1991	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1992	ENDIF
1993
1994	IF ( averaging_interval_sp == 9999999.9 ) THEN
1995	averaging_interval_sp = averaging_interval
1996	ENDIF
1997
1998	IF ( averaging_interval_sp > dt_dosp ) THEN
1999	WRITE( message_string, * ) 'averaging_interval_sp = ', &
2000	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
2001	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
2002	ENDIF
2003
2004	!
2005	!-- Set the default interval for profiles entering the temporal average
2006	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
2007	dt_averaging_input_pr = dt_averaging_input
2008	ENDIF
2009
2010	!
2011	!-- Set the default interval for the output of timeseries to a reasonable
2012	!-- value (tries to minimize the number of calls of flow_statistics)
2013	IF ( dt_dots == 9999999.9 ) THEN
2014	IF ( averaging_interval_pr == 0.0 ) THEN
2015	dt_dots = MIN( dt_run_control, dt_dopr )
2016	ELSE
2017	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
2018	ENDIF
2019	ENDIF
2020
2021	!
2022	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
2023	IF ( dt_averaging_input > averaging_interval ) THEN
2024	WRITE( message_string, * ) 'dt_averaging_input = ', &
2025	dt_averaging_input, ' must be <= averaging_interval = ', &
2026	averaging_interval
2027	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
2028	ENDIF
2029
2030	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
2031	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
2032	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
2033	averaging_interval_pr
2034	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
2035	ENDIF
2036
2037	!
2038	!-- Set the default value for the integration interval of precipitation amount
2039	IF ( precipitation ) THEN
2040	IF ( precipitation_amount_interval == 9999999.9 ) THEN
2041	precipitation_amount_interval = dt_do2d_xy
2042	ELSE
2043	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
2044	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
2045	precipitation_amount_interval, ' must not be larger than ', &
2046	'dt_do2d_xy = ', dt_do2d_xy
2047	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
2048	ENDIF
2049	ENDIF
2050	ENDIF
2051
2052	!
2053	!-- Determine the number of output profiles and check whether they are
2054	!-- permissible
2055	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
2056
2057	dopr_n = dopr_n + 1
2058	i = dopr_n
2059
2060	!
2061	!-- Determine internal profile number (for hom, homs)
2062	!-- and store height levels
2063	SELECT CASE ( TRIM( data_output_pr(i) ) )
2064
2065	CASE ( 'u', '#u' )
2066	dopr_index(i) = 1
2067	dopr_unit(i) = 'm/s'
2068	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
2069	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2070	dopr_initial_index(i) = 5
2071	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
2072	data_output_pr(i) = data_output_pr(i)(2:)
2073	ENDIF
2074
2075	CASE ( 'v', '#v' )
2076	dopr_index(i) = 2
2077	dopr_unit(i) = 'm/s'
2078	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
2079	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2080	dopr_initial_index(i) = 6
2081	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
2082	data_output_pr(i) = data_output_pr(i)(2:)
2083	ENDIF
2084
2085	CASE ( 'w' )
2086	dopr_index(i) = 3
2087	dopr_unit(i) = 'm/s'
2088	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2089
2090	CASE ( 'pt', '#pt' )
2091	IF ( .NOT. cloud_physics ) THEN
2092	dopr_index(i) = 4
2093	dopr_unit(i) = 'K'
2094	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2095	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2096	dopr_initial_index(i) = 7
2097	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2098	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
2099	data_output_pr(i) = data_output_pr(i)(2:)
2100	ENDIF
2101	ELSE
2102	dopr_index(i) = 43
2103	dopr_unit(i) = 'K'
2104	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2105	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2106	dopr_initial_index(i) = 28
2107	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2108	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
2109	data_output_pr(i) = data_output_pr(i)(2:)
2110	ENDIF
2111	ENDIF
2112
2113	CASE ( 'e' )
2114	dopr_index(i) = 8
2115	dopr_unit(i) = 'm2/s2'
2116	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2117	hom(nzb,2,8,:) = 0.0
2118
2119	CASE ( 'km', '#km' )
2120	dopr_index(i) = 9
2121	dopr_unit(i) = 'm2/s'
2122	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2123	hom(nzb,2,9,:) = 0.0
2124	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2125	dopr_initial_index(i) = 23
2126	hom(:,2,23,:) = hom(:,2,9,:)
2127	data_output_pr(i) = data_output_pr(i)(2:)
2128	ENDIF
2129
2130	CASE ( 'kh', '#kh' )
2131	dopr_index(i) = 10
2132	dopr_unit(i) = 'm2/s'
2133	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2134	hom(nzb,2,10,:) = 0.0
2135	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2136	dopr_initial_index(i) = 24
2137	hom(:,2,24,:) = hom(:,2,10,:)
2138	data_output_pr(i) = data_output_pr(i)(2:)
2139	ENDIF
2140
2141	CASE ( 'l', '#l' )
2142	dopr_index(i) = 11
2143	dopr_unit(i) = 'm'
2144	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2145	hom(nzb,2,11,:) = 0.0
2146	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2147	dopr_initial_index(i) = 25
2148	hom(:,2,25,:) = hom(:,2,11,:)
2149	data_output_pr(i) = data_output_pr(i)(2:)
2150	ENDIF
2151
2152	CASE ( 'w"u"' )
2153	dopr_index(i) = 12
2154	dopr_unit(i) = 'm2/s2'
2155	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2156	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2157
2158	CASE ( 'wu' )
2159	dopr_index(i) = 13
2160	dopr_unit(i) = 'm2/s2'
2161	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2162
2163	CASE ( 'w"v"' )
2164	dopr_index(i) = 14
2165	dopr_unit(i) = 'm2/s2'
2166	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2167	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2168
2169	CASE ( 'wv' )
2170	dopr_index(i) = 15
2171	dopr_unit(i) = 'm2/s2'
2172	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2173
2174	CASE ( 'w"pt"' )
2175	dopr_index(i) = 16
2176	dopr_unit(i) = 'K m/s'
2177	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2178
2179	CASE ( 'wpt' )
2180	dopr_index(i) = 17
2181	dopr_unit(i) = 'K m/s'
2182	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2183
2184	CASE ( 'wpt' )
2185	dopr_index(i) = 18
2186	dopr_unit(i) = 'K m/s'
2187	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2188
2189	CASE ( 'wu' )
2190	dopr_index(i) = 19
2191	dopr_unit(i) = 'm2/s2'
2192	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2193	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2194
2195	CASE ( 'wv' )
2196	dopr_index(i) = 20
2197	dopr_unit(i) = 'm2/s2'
2198	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2199	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2200
2201	CASE ( 'wptBC' )
2202	dopr_index(i) = 21
2203	dopr_unit(i) = 'K m/s'
2204	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2205
2206	CASE ( 'wptBC' )
2207	dopr_index(i) = 22
2208	dopr_unit(i) = 'K m/s'
2209	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2210
2211	CASE ( 'sa', '#sa' )
2212	IF ( .NOT. ocean ) THEN
2213	message_string = 'data_output_pr = ' // &
2214	TRIM( data_output_pr(i) ) // ' is not imp' // &
2215	'lemented for ocean = .FALSE.'
2216	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2217	ELSE
2218	dopr_index(i) = 23
2219	dopr_unit(i) = 'psu'
2220	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2221	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2222	dopr_initial_index(i) = 26
2223	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2224	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2225	data_output_pr(i) = data_output_pr(i)(2:)
2226	ENDIF
2227	ENDIF
2228
2229	CASE ( 'u*2' )
2230	dopr_index(i) = 30
2231	dopr_unit(i) = 'm2/s2'
2232	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2233
2234	CASE ( 'v*2' )
2235	dopr_index(i) = 31
2236	dopr_unit(i) = 'm2/s2'
2237	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2238
2239	CASE ( 'w*2' )
2240	dopr_index(i) = 32
2241	dopr_unit(i) = 'm2/s2'
2242	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2243
2244	CASE ( 'pt*2' )
2245	dopr_index(i) = 33
2246	dopr_unit(i) = 'K2'
2247	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2248
2249	CASE ( 'e*' )
2250	dopr_index(i) = 34
2251	dopr_unit(i) = 'm2/s2'
2252	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2253
2254	CASE ( 'w2pt' )
2255	dopr_index(i) = 35
2256	dopr_unit(i) = 'K m2/s2'
2257	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2258
2259	CASE ( 'wpt2' )
2260	dopr_index(i) = 36
2261	dopr_unit(i) = 'K2 m/s'
2262	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2263
2264	CASE ( 'we' )
2265	dopr_index(i) = 37
2266	dopr_unit(i) = 'm3/s3'
2267	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2268
2269	CASE ( 'w*3' )
2270	dopr_index(i) = 38
2271	dopr_unit(i) = 'm3/s3'
2272	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2273
2274	CASE ( 'Sw' )
2275	dopr_index(i) = 39
2276	dopr_unit(i) = 'none'
2277	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2278
2279	CASE ( 'p' )
2280	dopr_index(i) = 40
2281	dopr_unit(i) = 'Pa'
2282	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2283
2284	CASE ( 'q', '#q' )
2285	IF ( .NOT. humidity ) THEN
2286	message_string = 'data_output_pr = ' // &
2287	TRIM( data_output_pr(i) ) // ' is not imp' // &
2288	'lemented for humidity = .FALSE.'
2289	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2290	ELSE
2291	dopr_index(i) = 41
2292	dopr_unit(i) = 'kg/kg'
2293	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2294	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2295	dopr_initial_index(i) = 26
2296	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2297	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2298	data_output_pr(i) = data_output_pr(i)(2:)
2299	ENDIF
2300	ENDIF
2301
2302	CASE ( 's', '#s' )
2303	IF ( .NOT. passive_scalar ) THEN
2304	message_string = 'data_output_pr = ' // &
2305	TRIM( data_output_pr(i) ) // ' is not imp' // &
2306	'lemented for passive_scalar = .FALSE.'
2307	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2308	ELSE
2309	dopr_index(i) = 41
2310	dopr_unit(i) = 'kg/m3'
2311	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2312	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2313	dopr_initial_index(i) = 26
2314	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2315	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2316	data_output_pr(i) = data_output_pr(i)(2:)
2317	ENDIF
2318	ENDIF
2319
2320	CASE ( 'qv', '#qv' )
2321	IF ( .NOT. cloud_physics ) THEN
2322	dopr_index(i) = 41
2323	dopr_unit(i) = 'kg/kg'
2324	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2325	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2326	dopr_initial_index(i) = 26
2327	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2328	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2329	data_output_pr(i) = data_output_pr(i)(2:)
2330	ENDIF
2331	ELSE
2332	dopr_index(i) = 42
2333	dopr_unit(i) = 'kg/kg'
2334	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2335	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2336	dopr_initial_index(i) = 27
2337	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2338	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2339	data_output_pr(i) = data_output_pr(i)(2:)
2340	ENDIF
2341	ENDIF
2342
2343	CASE ( 'lpt', '#lpt' )
2344	IF ( .NOT. cloud_physics ) THEN
2345	message_string = 'data_output_pr = ' // &
2346	TRIM( data_output_pr(i) ) // ' is not imp' // &
2347	'lemented for cloud_physics = .FALSE.'
2348	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2349	ELSE
2350	dopr_index(i) = 4
2351	dopr_unit(i) = 'K'
2352	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2353	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2354	dopr_initial_index(i) = 7
2355	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2356	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2357	data_output_pr(i) = data_output_pr(i)(2:)
2358	ENDIF
2359	ENDIF
2360
2361	CASE ( 'vpt', '#vpt' )
2362	dopr_index(i) = 44
2363	dopr_unit(i) = 'K'
2364	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2365	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2366	dopr_initial_index(i) = 29
2367	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2368	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2369	data_output_pr(i) = data_output_pr(i)(2:)
2370	ENDIF
2371
2372	CASE ( 'w"vpt"' )
2373	dopr_index(i) = 45
2374	dopr_unit(i) = 'K m/s'
2375	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2376
2377	CASE ( 'wvpt' )
2378	dopr_index(i) = 46
2379	dopr_unit(i) = 'K m/s'
2380	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2381
2382	CASE ( 'wvpt' )
2383	dopr_index(i) = 47
2384	dopr_unit(i) = 'K m/s'
2385	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2386
2387	CASE ( 'w"q"' )
2388	IF ( .NOT. humidity ) THEN
2389	message_string = 'data_output_pr = ' // &
2390	TRIM( data_output_pr(i) ) // ' is not imp' // &
2391	'lemented for humidity = .FALSE.'
2392	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2393	ELSE
2394	dopr_index(i) = 48
2395	dopr_unit(i) = 'kg/kg m/s'
2396	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2397	ENDIF
2398
2399	CASE ( 'wq' )
2400	IF ( .NOT. humidity ) THEN
2401	message_string = 'data_output_pr = ' // &
2402	TRIM( data_output_pr(i) ) // ' is not imp' // &
2403	'lemented for humidity = .FALSE.'
2404	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2405	ELSE
2406	dopr_index(i) = 49
2407	dopr_unit(i) = 'kg/kg m/s'
2408	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2409	ENDIF
2410
2411	CASE ( 'wq' )
2412	IF ( .NOT. humidity ) THEN
2413	message_string = 'data_output_pr = ' // &
2414	TRIM( data_output_pr(i) ) // ' is not imp' // &
2415	'lemented for humidity = .FALSE.'
2416	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2417	ELSE
2418	dopr_index(i) = 50
2419	dopr_unit(i) = 'kg/kg m/s'
2420	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2421	ENDIF
2422
2423	CASE ( 'w"s"' )
2424	IF ( .NOT. passive_scalar ) THEN
2425	message_string = 'data_output_pr = ' // &
2426	TRIM( data_output_pr(i) ) // ' is not imp' // &
2427	'lemented for passive_scalar = .FALSE.'
2428	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2429	ELSE
2430	dopr_index(i) = 48
2431	dopr_unit(i) = 'kg/m3 m/s'
2432	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2433	ENDIF
2434
2435	CASE ( 'ws' )
2436	IF ( .NOT. passive_scalar ) THEN
2437	message_string = 'data_output_pr = ' // &
2438	TRIM( data_output_pr(i) ) // ' is not imp' // &
2439	'lemented for passive_scalar = .FALSE.'
2440	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2441	ELSE
2442	dopr_index(i) = 49
2443	dopr_unit(i) = 'kg/m3 m/s'
2444	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2445	ENDIF
2446
2447	CASE ( 'ws' )
2448	IF ( .NOT. passive_scalar ) THEN
2449	message_string = 'data_output_pr = ' // &
2450	TRIM( data_output_pr(i) ) // ' is not imp' // &
2451	'lemented for passive_scalar = .FALSE.'
2452	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2453	ELSE
2454	dopr_index(i) = 50
2455	dopr_unit(i) = 'kg/m3 m/s'
2456	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2457	ENDIF
2458
2459	CASE ( 'w"qv"' )
2460	IF ( humidity .AND. .NOT. cloud_physics ) &
2461	THEN
2462	dopr_index(i) = 48
2463	dopr_unit(i) = 'kg/kg m/s'
2464	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2465	ELSEIF( humidity .AND. cloud_physics ) THEN
2466	dopr_index(i) = 51
2467	dopr_unit(i) = 'kg/kg m/s'
2468	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2469	ELSE
2470	message_string = 'data_output_pr = ' // &
2471	TRIM( data_output_pr(i) ) // ' is not imp' // &
2472	'lemented for cloud_physics = .FALSE. an&' // &
2473	'd humidity = .FALSE.'
2474	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2475	ENDIF
2476
2477	CASE ( 'wqv' )
2478	IF ( humidity .AND. .NOT. cloud_physics ) &
2479	THEN
2480	dopr_index(i) = 49
2481	dopr_unit(i) = 'kg/kg m/s'
2482	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2483	ELSEIF( humidity .AND. cloud_physics ) THEN
2484	dopr_index(i) = 52
2485	dopr_unit(i) = 'kg/kg m/s'
2486	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2487	ELSE
2488	message_string = 'data_output_pr = ' // &
2489	TRIM( data_output_pr(i) ) // ' is not imp' // &
2490	'lemented for cloud_physics = .FALSE. an&' // &
2491	'd humidity = .FALSE.'
2492	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2493	ENDIF
2494
2495	CASE ( 'wqv' )
2496	IF ( humidity .AND. .NOT. cloud_physics ) &
2497	THEN
2498	dopr_index(i) = 50
2499	dopr_unit(i) = 'kg/kg m/s'
2500	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2501	ELSEIF( humidity .AND. cloud_physics ) THEN
2502	dopr_index(i) = 53
2503	dopr_unit(i) = 'kg/kg m/s'
2504	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2505	ELSE
2506	message_string = 'data_output_pr = ' // &
2507	TRIM( data_output_pr(i) ) // ' is not imp' // &
2508	'lemented for cloud_physics = .FALSE. an&' // &
2509	'd humidity = .FALSE.'
2510	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2511	ENDIF
2512
2513	CASE ( 'ql' )
2514	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2515	message_string = 'data_output_pr = ' // &
2516	TRIM( data_output_pr(i) ) // ' is not imp' // &
2517	'lemented for cloud_physics = .FALSE. or' // &
2518	'&cloud_droplets = .FALSE.'
2519	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2520	ELSE
2521	dopr_index(i) = 54
2522	dopr_unit(i) = 'kg/kg'
2523	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2524	ENDIF
2525
2526	CASE ( 'wuu*:dz' )
2527	dopr_index(i) = 55
2528	dopr_unit(i) = 'm2/s3'
2529	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2530
2531	CASE ( 'wp:dz' )
2532	dopr_index(i) = 56
2533	dopr_unit(i) = 'm2/s3'
2534	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2535
2536	CASE ( 'w"e:dz' )
2537	dopr_index(i) = 57
2538	dopr_unit(i) = 'm2/s3'
2539	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2540
2541
2542	CASE ( 'u"pt"' )
2543	dopr_index(i) = 58
2544	dopr_unit(i) = 'K m/s'
2545	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2546
2547	CASE ( 'upt' )
2548	dopr_index(i) = 59
2549	dopr_unit(i) = 'K m/s'
2550	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2551
2552	CASE ( 'upt_t' )
2553	dopr_index(i) = 60
2554	dopr_unit(i) = 'K m/s'
2555	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2556
2557	CASE ( 'v"pt"' )
2558	dopr_index(i) = 61
2559	dopr_unit(i) = 'K m/s'
2560	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2561
2562	CASE ( 'vpt' )
2563	dopr_index(i) = 62
2564	dopr_unit(i) = 'K m/s'
2565	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2566
2567	CASE ( 'vpt_t' )
2568	dopr_index(i) = 63
2569	dopr_unit(i) = 'K m/s'
2570	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2571
2572	CASE ( 'rho' )
2573	IF ( .NOT. ocean ) THEN
2574	message_string = 'data_output_pr = ' // &
2575	TRIM( data_output_pr(i) ) // ' is not imp' // &
2576	'lemented for ocean = .FALSE.'
2577	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2578	ELSE
2579	dopr_index(i) = 64
2580	dopr_unit(i) = 'kg/m3'
2581	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2582	ENDIF
2583
2584	CASE ( 'w"sa"' )
2585	IF ( .NOT. ocean ) THEN
2586	message_string = 'data_output_pr = ' // &
2587	TRIM( data_output_pr(i) ) // ' is not imp' // &
2588	'lemented for ocean = .FALSE.'
2589	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2590	ELSE
2591	dopr_index(i) = 65
2592	dopr_unit(i) = 'psu m/s'
2593	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2594	ENDIF
2595
2596	CASE ( 'wsa' )
2597	IF ( .NOT. ocean ) THEN
2598	message_string = 'data_output_pr = ' // &
2599	TRIM( data_output_pr(i) ) // ' is not imp' // &
2600	'lemented for ocean = .FALSE.'
2601	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2602	ELSE
2603	dopr_index(i) = 66
2604	dopr_unit(i) = 'psu m/s'
2605	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2606	ENDIF
2607
2608	CASE ( 'wsa' )
2609	IF ( .NOT. ocean ) THEN
2610	message_string = 'data_output_pr = ' // &
2611	TRIM( data_output_pr(i) ) // ' is not imp' // &
2612	'lemented for ocean = .FALSE.'
2613	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2614	ELSE
2615	dopr_index(i) = 67
2616	dopr_unit(i) = 'psu m/s'
2617	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2618	ENDIF
2619
2620	CASE ( 'wp' )
2621	dopr_index(i) = 68
2622	dopr_unit(i) = 'm3/s3'
2623	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2624
2625	CASE ( 'w"e' )
2626	dopr_index(i) = 69
2627	dopr_unit(i) = 'm3/s3'
2628	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2629
2630	CASE ( 'q*2' )
2631	IF ( .NOT. humidity ) THEN
2632	message_string = 'data_output_pr = ' // &
2633	TRIM( data_output_pr(i) ) // ' is not imp' // &
2634	'lemented for humidity = .FALSE.'
2635	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2636	ELSE
2637	dopr_index(i) = 70
2638	dopr_unit(i) = 'kg2/kg2'
2639	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2640	ENDIF
2641
2642	CASE ( 'prho' )
2643	IF ( .NOT. ocean ) THEN
2644	message_string = 'data_output_pr = ' // &
2645	TRIM( data_output_pr(i) ) // ' is not imp' // &
2646	'lemented for ocean = .FALSE.'
2647	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2648	ELSE
2649	dopr_index(i) = 71
2650	dopr_unit(i) = 'kg/m3'
2651	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2652	ENDIF
2653
2654	CASE ( 'hyp' )
2655	dopr_index(i) = 72
2656	dopr_unit(i) = 'dbar'
2657	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2658
2659	CASE ( 'nr' )
2660	IF ( .NOT. cloud_physics ) THEN
2661	message_string = 'data_output_pr = ' // &
2662	TRIM( data_output_pr(i) ) // ' is not imp' // &
2663	'lemented for cloud_physics = .FALSE.'
2664	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2665	ELSEIF ( icloud_scheme /= 0 ) THEN
2666	message_string = 'data_output_pr = ' // &
2667	TRIM( data_output_pr(i) ) // ' is not imp' // &
2668	'lemented for cloud_scheme /= seifert_beheng'
2669	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2670	ELSE
2671	dopr_index(i) = 73
2672	dopr_unit(i) = '1/m3'
2673	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2674	ENDIF
2675
2676	CASE ( 'qr' )
2677	IF ( .NOT. cloud_physics ) THEN
2678	message_string = 'data_output_pr = ' // &
2679	TRIM( data_output_pr(i) ) // ' is not imp' // &
2680	'lemented for cloud_physics = .FALSE.'
2681	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2682	ELSEIF ( icloud_scheme /= 0 ) THEN
2683	message_string = 'data_output_pr = ' // &
2684	TRIM( data_output_pr(i) ) // ' is not imp' // &
2685	'lemented for cloud_scheme /= seifert_beheng'
2686	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2687	ELSE
2688	dopr_index(i) = 74
2689	dopr_unit(i) = 'kg/kg'
2690	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2691	ENDIF
2692
2693	CASE ( 'qc' )
2694	IF ( .NOT. cloud_physics ) THEN
2695	message_string = 'data_output_pr = ' // &
2696	TRIM( data_output_pr(i) ) // ' is not imp' // &
2697	'lemented for cloud_physics = .FALSE.'
2698	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2699	ELSEIF ( icloud_scheme /= 0 ) THEN
2700	message_string = 'data_output_pr = ' // &
2701	TRIM( data_output_pr(i) ) // ' is not imp' // &
2702	'lemented for cloud_scheme /= seifert_beheng'
2703	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2704	ELSE
2705	dopr_index(i) = 75
2706	dopr_unit(i) = 'kg/kg'
2707	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2708	ENDIF
2709
2710	CASE ( 'prr' )
2711	IF ( .NOT. cloud_physics ) THEN
2712	message_string = 'data_output_pr = ' // &
2713	TRIM( data_output_pr(i) ) // ' is not imp' // &
2714	'lemented for cloud_physics = .FALSE.'
2715	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2716	ELSEIF ( icloud_scheme /= 0 ) THEN
2717	message_string = 'data_output_pr = ' // &
2718	TRIM( data_output_pr(i) ) // ' is not imp' // &
2719	'lemented for cloud_scheme /= seifert_beheng'
2720	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2721	ELSEIF ( .NOT. precipitation ) THEN
2722	message_string = 'data_output_pr = ' // &
2723	TRIM( data_output_pr(i) ) // ' is not imp' // &
2724	'lemented for precipitation = .FALSE.'
2725	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2726
2727	ELSE
2728	dopr_index(i) = 76
2729	dopr_unit(i) = 'kg/kg m/s'
2730	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2731	ENDIF
2732
2733	CASE DEFAULT
2734
2735	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2736
2737	IF ( unit == 'illegal' ) THEN
2738	IF ( data_output_pr_user(1) /= ' ' ) THEN
2739	message_string = 'illegal value for data_output_pr or ' // &
2740	'data_output_pr_user = "' // &
2741	TRIM( data_output_pr(i) ) // '"'
2742	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2743	ELSE
2744	message_string = 'illegal value for data_output_pr = "' // &
2745	TRIM( data_output_pr(i) ) // '"'
2746	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2747	ENDIF
2748	ENDIF
2749
2750	END SELECT
2751
2752	ENDDO
2753
2754
2755	!
2756	!-- Append user-defined data output variables to the standard data output
2757	IF ( data_output_user(1) /= ' ' ) THEN
2758	i = 1
2759	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2760	i = i + 1
2761	ENDDO
2762	j = 1
2763	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2764	IF ( i > 100 ) THEN
2765	message_string = 'number of output quantitities given by data' // &
2766	'_output and data_output_user exceeds the limit of 100'
2767	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2768	ENDIF
2769	data_output(i) = data_output_user(j)
2770	i = i + 1
2771	j = j + 1
2772	ENDDO
2773	ENDIF
2774
2775	!
2776	!-- Check and set steering parameters for 2d/3d data output and averaging
2777	i = 1
2778	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2779	!
2780	!-- Check for data averaging
2781	ilen = LEN_TRIM( data_output(i) )
2782	j = 0 ! no data averaging
2783	IF ( ilen > 3 ) THEN
2784	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2785	j = 1 ! data averaging
2786	data_output(i) = data_output(i)(1:ilen-3)
2787	ENDIF
2788	ENDIF
2789	!
2790	!-- Check for cross section or volume data
2791	ilen = LEN_TRIM( data_output(i) )
2792	k = 0 ! 3d data
2793	var = data_output(i)(1:ilen)
2794	IF ( ilen > 3 ) THEN
2795	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2796	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2797	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2798	k = 1 ! 2d data
2799	var = data_output(i)(1:ilen-3)
2800	ENDIF
2801	ENDIF
2802	!
2803	!-- Check for allowed value and set units
2804	SELECT CASE ( TRIM( var ) )
2805
2806	CASE ( 'e' )
2807	IF ( constant_diffusion ) THEN
2808	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2809	'res constant_diffusion = .FALSE.'
2810	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2811	ENDIF
2812	unit = 'm2/s2'
2813
2814	CASE ( 'lpt' )
2815	IF ( .NOT. cloud_physics ) THEN
2816	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2817	'res cloud_physics = .TRUE.'
2818	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2819	ENDIF
2820	unit = 'K'
2821
2822	CASE ( 'nr' )
2823	IF ( .NOT. cloud_physics ) THEN
2824	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2825	'res cloud_physics = .TRUE.'
2826	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2827	ELSEIF ( icloud_scheme /= 0 ) THEN
2828	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2829	'res cloud_scheme = seifert_beheng'
2830	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2831	ENDIF
2832	unit = '1/m3'
2833
2834	CASE ( 'pc', 'pr' )
2835	IF ( .NOT. particle_advection ) THEN
2836	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2837	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2838	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2839	ENDIF
2840	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2841	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2842
2843	CASE ( 'prr' )
2844	IF ( .NOT. cloud_physics ) THEN
2845	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2846	'res cloud_physics = .TRUE.'
2847	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2848	ELSEIF ( icloud_scheme /= 0 ) THEN
2849	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2850	'res cloud_scheme = seifert_beheng'
2851	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2852	ELSEIF ( .NOT. precipitation ) THEN
2853	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2854	'res precipitation = .TRUE.'
2855	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2856	ENDIF
2857	unit = 'kg/kg m/s'
2858
2859	CASE ( 'q', 'vpt' )
2860	IF ( .NOT. humidity ) THEN
2861	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2862	'res humidity = .TRUE.'
2863	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2864	ENDIF
2865	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2866	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2867
2868	CASE ( 'qc' )
2869	IF ( .NOT. cloud_physics ) THEN
2870	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2871	'res cloud_physics = .TRUE.'
2872	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2873	ELSEIF ( icloud_scheme /= 0 ) THEN
2874	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2875	'res cloud_scheme = seifert_beheng'
2876	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2877	ENDIF
2878	unit = 'kg/kg'
2879
2880	CASE ( 'ql' )
2881	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2882	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2883	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2884	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2885	ENDIF
2886	unit = 'kg/kg'
2887
2888	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2889	IF ( .NOT. cloud_droplets ) THEN
2890	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2891	'res cloud_droplets = .TRUE.'
2892	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2893	ENDIF
2894	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2895	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2896	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2897
2898	CASE ( 'qr' )
2899	IF ( .NOT. cloud_physics ) THEN
2900	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2901	'res cloud_physics = .TRUE.'
2902	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2903	ELSEIF ( icloud_scheme /= 0 ) THEN
2904	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2905	'res cloud_scheme = seifert_beheng'
2906	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2907	ENDIF
2908	unit = 'kg/kg'
2909
2910	CASE ( 'qv' )
2911	IF ( .NOT. cloud_physics ) THEN
2912	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2913	'res cloud_physics = .TRUE.'
2914	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2915	ENDIF
2916	unit = 'kg/kg'
2917
2918	CASE ( 'rho' )
2919	IF ( .NOT. ocean ) THEN
2920	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2921	'res ocean = .TRUE.'
2922	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2923	ENDIF
2924	unit = 'kg/m3'
2925
2926	CASE ( 's' )
2927	IF ( .NOT. passive_scalar ) THEN
2928	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2929	'res passive_scalar = .TRUE.'
2930	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2931	ENDIF
2932	unit = 'conc'
2933
2934	CASE ( 'sa' )
2935	IF ( .NOT. ocean ) THEN
2936	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2937	'res ocean = .TRUE.'
2938	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2939	ENDIF
2940	unit = 'psu'
2941
2942	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2943	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2944	message_string = 'illegal value for data_output: "' // &
2945	TRIM( var ) // '" & only 2d-horizontal ' // &
2946	'cross sections are allowed for this value'
2947	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2948	ENDIF
2949	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2950	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2951	'res cloud_physics = .TRUE.'
2952	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2953	ENDIF
2954	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2955	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2956	'res precipitation = .TRUE.'
2957	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2958	ENDIF
2959	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2960	message_string = 'temporal averaging of precipitation ' // &
2961	'amount "' // TRIM( var ) // '" is not possible'
2962	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2963	ENDIF
2964	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2965	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2966	'res precipitation = .TRUE.'
2967	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2968	ENDIF
2969	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2970	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2971	'res humidity = .TRUE.'
2972	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2973	ENDIF
2974
2975	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2976	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2977	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2978	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2979	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2980	IF ( TRIM( var ) == 't*' ) unit = 'K'
2981	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2982	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2983	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2984
2985
2986	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2987	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2988	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2989	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2990	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2991	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2992	CONTINUE
2993
2994	CASE DEFAULT
2995	CALL user_check_data_output( var, unit )
2996
2997	IF ( unit == 'illegal' ) THEN
2998	IF ( data_output_user(1) /= ' ' ) THEN
2999	message_string = 'illegal value for data_output or ' // &
3000	'data_output_user = "' // TRIM( data_output(i) ) // '"'
3001	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
3002	ELSE
3003	message_string = 'illegal value for data_output =' // &
3004	TRIM( data_output(i) ) // '"'
3005	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
3006	ENDIF
3007	ENDIF
3008
3009	END SELECT
3010	!
3011	!-- Set the internal steering parameters appropriately
3012	IF ( k == 0 ) THEN
3013	do3d_no(j) = do3d_no(j) + 1
3014	do3d(j,do3d_no(j)) = data_output(i)
3015	do3d_unit(j,do3d_no(j)) = unit
3016	ELSE
3017	do2d_no(j) = do2d_no(j) + 1
3018	do2d(j,do2d_no(j)) = data_output(i)
3019	do2d_unit(j,do2d_no(j)) = unit
3020	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
3021	data_output_xy(j) = .TRUE.
3022	ENDIF
3023	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
3024	data_output_xz(j) = .TRUE.
3025	ENDIF
3026	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3027	data_output_yz(j) = .TRUE.
3028	ENDIF
3029	ENDIF
3030
3031	IF ( j == 1 ) THEN
3032	!
3033	!-- Check, if variable is already subject to averaging
3034	found = .FALSE.
3035	DO k = 1, doav_n
3036	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
3037	ENDDO
3038
3039	IF ( .NOT. found ) THEN
3040	doav_n = doav_n + 1
3041	doav(doav_n) = var
3042	ENDIF
3043	ENDIF
3044
3045	i = i + 1
3046	ENDDO
3047
3048	!
3049	!-- Averaged 2d or 3d output requires that an averaging interval has been set
3050	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
3051	WRITE( message_string, * ) 'output of averaged quantity "', &
3052	TRIM( doav(1) ), '_av" requires to set a ', &
3053	'non-zero & averaging interval'
3054	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
3055	ENDIF
3056
3057	!
3058	!-- Check sectional planes and store them in one shared array
3059	IF ( ANY( section_xy > nz + 1 ) ) THEN
3060	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3061	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3062	ENDIF
3063	IF ( ANY( section_xz > ny + 1 ) ) THEN
3064	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3065	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3066	ENDIF
3067	IF ( ANY( section_yz > nx + 1 ) ) THEN
3068	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3069	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3070	ENDIF
3071	section(:,1) = section_xy
3072	section(:,2) = section_xz
3073	section(:,3) = section_yz
3074
3075	!
3076	!-- Upper plot limit for 2D vertical sections
3077	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
3078	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3079	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3080	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3081	' (zu(nzt))'
3082	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3083	ENDIF
3084
3085	!
3086	!-- Upper plot limit for 3D arrays
3087	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3088
3089	!
3090	!-- Determine and check accuracy for compressed 3D plot output
3091	IF ( do3d_compress ) THEN
3092	!
3093	!-- Compression only permissible on T3E machines
3094	IF ( host(1:3) /= 't3e' ) THEN
3095	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3096	TRIM( host ) // '"'
3097	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3098	ENDIF
3099
3100	i = 1
3101	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3102
3103	ilen = LEN_TRIM( do3d_comp_prec(i) )
3104	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3105	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3106	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3107	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3108	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3109	ENDIF
3110
3111	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3112	var = do3d_comp_prec(i)(1:ilen-1)
3113
3114	SELECT CASE ( var )
3115
3116	CASE ( 'u' )
3117	j = 1
3118	CASE ( 'v' )
3119	j = 2
3120	CASE ( 'w' )
3121	j = 3
3122	CASE ( 'p' )
3123	j = 4
3124	CASE ( 'pt' )
3125	j = 5
3126
3127	CASE DEFAULT
3128	WRITE( message_string, * ) 'unknown variable "', &
3129	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3130	i, ')'
3131	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3132
3133	END SELECT
3134
3135	plot_3d_precision(j)%precision = prec
3136	i = i + 1
3137
3138	ENDDO
3139	ENDIF
3140
3141	!
3142	!-- Check the data output format(s)
3143	IF ( data_output_format(1) == ' ' ) THEN
3144	!
3145	!-- Default value
3146	netcdf_output = .TRUE.
3147	ELSE
3148	i = 1
3149	DO WHILE ( data_output_format(i) /= ' ' )
3150
3151	SELECT CASE ( data_output_format(i) )
3152
3153	CASE ( 'netcdf' )
3154	netcdf_output = .TRUE.
3155	CASE ( 'iso2d' )
3156	iso2d_output = .TRUE.
3157	CASE ( 'avs' )
3158	avs_output = .TRUE.
3159
3160	CASE DEFAULT
3161	message_string = 'unknown value for data_output_format "' // &
3162	TRIM( data_output_format(i) ) // '"'
3163	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3164
3165	END SELECT
3166
3167	i = i + 1
3168	IF ( i > 10 ) EXIT
3169
3170	ENDDO
3171	ENDIF
3172
3173	!
3174	!-- Set output format string (used in header)
3175	IF ( netcdf_output ) THEN
3176
3177	SELECT CASE ( netcdf_data_format )
3178	CASE ( 1 )
3179	output_format_netcdf = 'netCDF classic'
3180	CASE ( 2 )
3181	output_format_netcdf = 'netCDF 64bit offset'
3182	CASE ( 3 )
3183	output_format_netcdf = 'netCDF4/HDF5'
3184	CASE ( 4 )
3185	output_format_netcdf = 'netCDF4/HDF5 classic'
3186	CASE ( 5 )
3187	output_format_netcdf = 'parallel netCDF4/HDF5'
3188	CASE ( 6 )
3189	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3190
3191	END SELECT
3192
3193	ENDIF
3194
3195	!
3196	!-- Check mask conditions
3197	DO mid = 1, max_masks
3198	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3199	data_output_masks_user(mid,1) /= ' ' ) THEN
3200	masks = masks + 1
3201	ENDIF
3202	ENDDO
3203
3204	IF ( masks < 0 .OR. masks > max_masks ) THEN
3205	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3206	'<= ', max_masks, ' (=max_masks)'
3207	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3208	ENDIF
3209	IF ( masks > 0 ) THEN
3210	mask_scale(1) = mask_scale_x
3211	mask_scale(2) = mask_scale_y
3212	mask_scale(3) = mask_scale_z
3213	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3214	WRITE( message_string, * ) &
3215	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3216	'must be > 0.0'
3217	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3218	ENDIF
3219	!
3220	!-- Generate masks for masked data output
3221	CALL init_masks
3222	ENDIF
3223
3224	!
3225	!-- Check the NetCDF data format
3226	#if ! defined ( __check )
3227	IF ( netcdf_data_format > 2 ) THEN
3228	#if defined( __netcdf4 )
3229	CONTINUE
3230	#else
3231	message_string = 'netCDF: netCDF4 format requested but no ' // &
3232	'cpp-directive __netcdf4 given & switch ' // &
3233	'back to 64-bit offset format'
3234	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3235	netcdf_data_format = 2
3236	#endif
3237	ENDIF
3238	IF ( netcdf_data_format > 4 ) THEN
3239	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3240	CONTINUE
3241	#else
3242	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3243	'cpp-directive __netcdf4_parallel given & switch ' // &
3244	'back to netCDF4 non-parallel output'
3245	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3246	netcdf_data_format = netcdf_data_format - 2
3247	#endif
3248	ENDIF
3249	#endif
3250
3251	#if ! defined( __check )
3252	!
3253	!-- Check netcdf precison
3254	ldum = .FALSE.
3255	CALL define_netcdf_header( 'ch', ldum, 0 )
3256	#endif
3257	!
3258	!-- Check, whether a constant diffusion coefficient shall be used
3259	IF ( km_constant /= -1.0 ) THEN
3260	IF ( km_constant < 0.0 ) THEN
3261	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3262	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3263	ELSE
3264	IF ( prandtl_number < 0.0 ) THEN
3265	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3266	' < 0.0'
3267	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3268	ENDIF
3269	constant_diffusion = .TRUE.
3270
3271	IF ( prandtl_layer ) THEN
3272	message_string = 'prandtl_layer is not allowed with fixed ' // &
3273	'value of km'
3274	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3275	ENDIF
3276	ENDIF
3277	ENDIF
3278
3279	!
3280	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3281	!-- potential temperature, check the width of the damping layer
3282	IF ( bc_lr /= 'cyclic' ) THEN
3283	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3284	message_string = 'pt_damping_width out of range'
3285	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3286	ENDIF
3287	ENDIF
3288
3289	IF ( bc_ns /= 'cyclic' ) THEN
3290	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3291	message_string = 'pt_damping_width out of range'
3292	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3293	ENDIF
3294	ENDIF
3295
3296	!
3297	!-- Check value range for rif
3298	IF ( rif_min >= rif_max ) THEN
3299	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3300	'than rif_max = ', rif_max
3301	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3302	ENDIF
3303
3304	!
3305	!-- Determine upper and lower hight level indices for random perturbations
3306	IF ( disturbance_level_b == -9999999.9 ) THEN
3307	IF ( ocean ) THEN
3308	disturbance_level_b = zu((nzt*2)/3)
3309	disturbance_level_ind_b = ( nzt * 2 ) / 3
3310	ELSE
3311	disturbance_level_b = zu(nzb+3)
3312	disturbance_level_ind_b = nzb + 3
3313	ENDIF
3314	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3315	WRITE( message_string, * ) 'disturbance_level_b = ', &
3316	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3317	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3318	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3319	WRITE( message_string, * ) 'disturbance_level_b = ', &
3320	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3321	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3322	ELSE
3323	DO k = 3, nzt-2
3324	IF ( disturbance_level_b <= zu(k) ) THEN
3325	disturbance_level_ind_b = k
3326	EXIT
3327	ENDIF
3328	ENDDO
3329	ENDIF
3330
3331	IF ( disturbance_level_t == -9999999.9 ) THEN
3332	IF ( ocean ) THEN
3333	disturbance_level_t = zu(nzt-3)
3334	disturbance_level_ind_t = nzt - 3
3335	ELSE
3336	disturbance_level_t = zu(nzt/3)
3337	disturbance_level_ind_t = nzt / 3
3338	ENDIF
3339	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3340	WRITE( message_string, * ) 'disturbance_level_t = ', &
3341	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3342	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3343	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3344	WRITE( message_string, * ) 'disturbance_level_t = ', &
3345	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3346	disturbance_level_b
3347	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3348	ELSE
3349	DO k = 3, nzt-2
3350	IF ( disturbance_level_t <= zu(k) ) THEN
3351	disturbance_level_ind_t = k
3352	EXIT
3353	ENDIF
3354	ENDDO
3355	ENDIF
3356
3357	!
3358	!-- Check again whether the levels determined this way are ok.
3359	!-- Error may occur at automatic determination and too few grid points in
3360	!-- z-direction.
3361	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3362	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3363	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3364	disturbance_level_b
3365	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3366	ENDIF
3367
3368	!
3369	!-- Determine the horizontal index range for random perturbations.
3370	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3371	!-- near the inflow and the perturbation area is further limited to ...(1)
3372	!-- after the initial phase of the flow.
3373	dist_nxl = 0; dist_nxr = nx
3374	dist_nys = 0; dist_nyn = ny
3375	IF ( bc_lr /= 'cyclic' ) THEN
3376	IF ( inflow_disturbance_begin == -1 ) THEN
3377	inflow_disturbance_begin = MIN( 10, nx/2 )
3378	ENDIF
3379	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3380	THEN
3381	message_string = 'inflow_disturbance_begin out of range'
3382	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3383	ENDIF
3384	IF ( inflow_disturbance_end == -1 ) THEN
3385	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3386	ENDIF
3387	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3388	THEN
3389	message_string = 'inflow_disturbance_end out of range'
3390	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3391	ENDIF
3392	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3393	IF ( inflow_disturbance_begin == -1 ) THEN
3394	inflow_disturbance_begin = MIN( 10, ny/2 )
3395	ENDIF
3396	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3397	THEN
3398	message_string = 'inflow_disturbance_begin out of range'
3399	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3400	ENDIF
3401	IF ( inflow_disturbance_end == -1 ) THEN
3402	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3403	ENDIF
3404	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3405	THEN
3406	message_string = 'inflow_disturbance_end out of range'
3407	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3408	ENDIF
3409	ENDIF
3410
3411	IF ( bc_lr == 'radiation/dirichlet' .OR. bc_lr == 'neumann/dirichlet' ) THEN
3412	dist_nxr = nx - inflow_disturbance_begin
3413	dist_nxl(1) = nx - inflow_disturbance_end
3414	ELSEIF ( bc_lr == 'dirichlet/radiation' .OR. bc_lr == 'dirichlet/neumann' ) THEN
3415	dist_nxl = inflow_disturbance_begin
3416	dist_nxr(1) = inflow_disturbance_end
3417	ENDIF
3418	IF ( bc_ns == 'dirichlet/radiation' .OR. bc_ns == 'dirichlet/neumann' ) THEN
3419	dist_nyn = ny - inflow_disturbance_begin
3420	dist_nys(1) = ny - inflow_disturbance_end
3421	ELSEIF ( bc_ns == 'radiation/dirichlet' .OR. bc_ns == 'neumann/dirichlet' ) THEN
3422	dist_nys = inflow_disturbance_begin
3423	dist_nyn(1) = inflow_disturbance_end
3424	ENDIF
3425
3426	!
3427	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3428	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3429	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' .AND. bc_lr /= 'dirichlet/neumann' ) THEN
3430	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3431	'condition at the inflow boundary'
3432	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3433	ENDIF
3434
3435	!
3436	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3437	!-- data from prerun
3438	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' ) THEN
3439	message_string = 'turbulent_inflow = .T. requires ' // &
3440	'initializing_actions = ''cyclic_fill'' '
3441	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3442	ENDIF
3443
3444	!
3445	!-- In case of turbulent inflow calculate the index of the recycling plane
3446	IF ( turbulent_inflow ) THEN
3447	IF ( recycling_width == 9999999.9 ) THEN
3448	!
3449	!-- Set the default value for the width of the recycling domain
3450	recycling_width = 0.1 * nx * dx
3451	ELSE
3452	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3453	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3454	' ', recycling_width
3455	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3456	ENDIF
3457	ENDIF
3458	!
3459	!-- Calculate the index
3460	recycling_plane = recycling_width / dx
3461	ENDIF
3462
3463	!
3464	!-- Check random generator
3465	IF ( random_generator /= 'system-specific' .AND. &
3466	random_generator /= 'numerical-recipes' ) THEN
3467	message_string = 'unknown random generator: random_generator = "' // &
3468	TRIM( random_generator ) // '"'
3469	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3470	ENDIF
3471
3472	!
3473	!-- Determine damping level index for 1D model
3474	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3475	IF ( damp_level_1d == -1.0 ) THEN
3476	damp_level_1d = zu(nzt+1)
3477	damp_level_ind_1d = nzt + 1
3478	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3479	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3480	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3481	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3482	ELSE
3483	DO k = 1, nzt+1
3484	IF ( damp_level_1d <= zu(k) ) THEN
3485	damp_level_ind_1d = k
3486	EXIT
3487	ENDIF
3488	ENDDO
3489	ENDIF
3490	ENDIF
3491
3492	!
3493	!-- Check some other 1d-model parameters
3494	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3495	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3496	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3497	'" is unknown'
3498	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3499	ENDIF
3500	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3501	TRIM( dissipation_1d ) /= 'detering' ) THEN
3502	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3503	'" is unknown'
3504	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3505	ENDIF
3506
3507	!
3508	!-- Set time for the next user defined restart (time_restart is the
3509	!-- internal parameter for steering restart events)
3510	IF ( restart_time /= 9999999.9 ) THEN
3511	IF ( restart_time > time_since_reference_point ) THEN
3512	time_restart = restart_time
3513	ENDIF
3514	ELSE
3515	!
3516	!-- In case of a restart run, set internal parameter to default (no restart)
3517	!-- if the NAMELIST-parameter restart_time is omitted
3518	time_restart = 9999999.9
3519	ENDIF
3520
3521	!
3522	!-- Set default value of the time needed to terminate a model run
3523	IF ( termination_time_needed == -1.0 ) THEN
3524	IF ( host(1:3) == 'ibm' ) THEN
3525	termination_time_needed = 300.0
3526	ELSE
3527	termination_time_needed = 35.0
3528	ENDIF
3529	ENDIF
3530
3531	!
3532	!-- Check the time needed to terminate a model run
3533	IF ( host(1:3) == 't3e' ) THEN
3534	!
3535	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3536	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3537	IF ( termination_time_needed <= 30.0 ) THEN
3538	WRITE( message_string, * ) 'termination_time_needed = ', &
3539	termination_time_needed, ' must be > 30.0 on host "', &
3540	TRIM( host ), '"'
3541	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3542	ENDIF
3543	ELSEIF ( host(1:3) == 'ibm' ) THEN
3544	!
3545	!-- On IBM-regatta machines the time should be at least 300 seconds,
3546	!-- because the job time consumed before executing palm (for compiling,
3547	!-- copying of files, etc.) has to be regarded
3548	IF ( termination_time_needed < 300.0 ) THEN
3549	WRITE( message_string, * ) 'termination_time_needed = ', &
3550	termination_time_needed, ' should be >= 300.0 on host "', &
3551	TRIM( host ), '"'
3552	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3553	ENDIF
3554	ENDIF
3555
3556	!
3557	!-- Check pressure gradient conditions
3558	IF ( dp_external .AND. conserve_volume_flow ) THEN
3559	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3560	'w are .TRUE. but one of them must be .FALSE.'
3561	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3562	ENDIF
3563	IF ( dp_external ) THEN
3564	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3565	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3566	' of range'
3567	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3568	ENDIF
3569	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3570	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3571	'ro, i.e. the external pressure gradient & will not be applied'
3572	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3573	ENDIF
3574	ENDIF
3575	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3576	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3577	'.FALSE., i.e. the external pressure gradient & will not be applied'
3578	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3579	ENDIF
3580	IF ( conserve_volume_flow ) THEN
3581	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3582
3583	conserve_volume_flow_mode = 'initial_profiles'
3584
3585	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3586	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3587	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3588	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3589	conserve_volume_flow_mode
3590	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3591	ENDIF
3592	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3593	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3594	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3595	'require conserve_volume_flow_mode = ''initial_profiles'''
3596	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3597	ENDIF
3598	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3599	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3600	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3601	'require conserve_volume_flow_mode = ''initial_profiles''', &
3602	' or ''bulk_velocity'''
3603	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3604	ENDIF
3605	ENDIF
3606	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3607	( .NOT. conserve_volume_flow .OR. &
3608	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3609	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3610	'conserve_volume_flow = .T. and ', &
3611	'conserve_volume_flow_mode = ''bulk_velocity'''
3612	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3613	ENDIF
3614
3615	!
3616	!-- Check particle attributes
3617	IF ( particle_color /= 'none' ) THEN
3618	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3619	particle_color /= 'z' ) THEN
3620	message_string = 'illegal value for parameter particle_color: ' // &
3621	TRIM( particle_color)
3622	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3623	ELSE
3624	IF ( color_interval(2) <= color_interval(1) ) THEN
3625	message_string = 'color_interval(2) <= color_interval(1)'
3626	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3627	ENDIF
3628	ENDIF
3629	ENDIF
3630
3631	IF ( particle_dvrpsize /= 'none' ) THEN
3632	IF ( particle_dvrpsize /= 'absw' ) THEN
3633	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3634	' ' // TRIM( particle_color)
3635	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3636	ELSE
3637	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3638	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3639	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3640	ENDIF
3641	ENDIF
3642	ENDIF
3643
3644	!
3645	!-- Check &userpar parameters
3646	CALL user_check_parameters
3647
3648
3649
3650	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |