Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 291

Last change on this file since 291 was 291, checked in by raasch, 16 years ago
changes for coupling with independent precursor runs; z_i calculation with Sullivan criterion
Property svn:keywords set to `Id`
File size: 116.7 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Coupling with independent precursor runs.
7	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
8	! Bugfix: pressure included for profile output
9	! Check pressure gradient conditions
10	! topography_grid_convention moved from user_check_parameters
11	! 'single_street_canyon'
12	!
13	! Former revisions:
14	! -----------------
15	! $Id: check_parameters.f90 291 2009-04-16 12:07:26Z raasch $
16	!
17	! 222 2009-01-12 16:04:16Z letzel
18	! +user_check_parameters
19	! Output of messages replaced by message handling routine.
20	! Implementation of an MPI-1 coupling: replaced myid with target_id,
21	! deleted __mpi2 directives
22	! Check that PALM is called with mrun -K parallel for coupling
23	!
24	! 197 2008-09-16 15:29:03Z raasch
25	! Bug fix: Construction of vertical profiles when 10 gradients have been
26	! specified in the parameter list (ug, vg, pt, q, sa, lad)
27	!
28	! Strict grid matching along z is not needed for mg-solver.
29	! Leaf area density (LAD) explicitly set to its surface value at k=0
30	! Case of reading data for recycling included in initializing_actions,
31	! check of turbulent_inflow and calculation of recycling_plane.
32	! q*2 profile added
33	!
34	! 138 2007-11-28 10:03:58Z letzel
35	! Plant canopy added
36	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
37	! Multigrid solver allows topography, checking of dt_sort_particles
38	! Bugfix: initializing u_init and v_init in case of ocean runs
39	!
40	! 109 2007-08-28 15:26:47Z letzel
41	! Check coupling_mode and set default (obligatory) values (like boundary
42	! conditions for temperature and fluxes) in case of coupled runs.
43	! +profiles for wp and w"e
44	! Bugfix: Error message concerning output of particle concentration (pc)
45	! modified
46	! More checks and more default values for coupled runs
47	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
48	! cloud_physics = .T.)
49	! Rayleigh damping for ocean fixed.
50	! Check and, if necessary, set default value for dt_coupling
51	!
52	! 97 2007-06-21 08:23:15Z raasch
53	! Initial salinity profile is calculated, salinity boundary conditions are
54	! checked,
55	! z_max_do1d is checked only in case of ocean = .f.,
56	! +initial temperature and geostrophic velocity profiles for the ocean version,
57	! use_pt_reference renamed use_reference
58	!
59	! 89 2007-05-25 12:08:31Z raasch
60	! Check for user-defined profiles
61	!
62	! 75 2007-03-22 09:54:05Z raasch
63	! "by_user" allowed as initializing action, -data_output_ts,
64	! leapfrog with non-flat topography not allowed any more, loop_optimization
65	! and pt_reference are checked, moisture renamed humidity,
66	! output of precipitation amount/rate and roughnes length + check
67	! possible negative humidities are avoided in initial profile,
68	! dirichlet/neumann changed to dirichlet/radiation, etc.,
69	! revision added to run_description_header
70	!
71	! 20 2007-02-26 00:12:32Z raasch
72	! Temperature and humidity gradients at top are now calculated for nzt+1,
73	! top_heatflux and respective boundary condition bc_pt_t is checked
74	!
75	! RCS Log replace by Id keyword, revision history cleaned up
76	!
77	! Revision 1.61 2006/08/04 14:20:25 raasch
78	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
79	! use_upstream_for_tke, default value for dt_dopts,
80	! generation of file header moved from routines palm and header to here
81	!
82	! Revision 1.1 1997/08/26 06:29:23 raasch
83	! Initial revision
84	!
85	!
86	! Description:
87	! ------------
88	! Check control parameters and deduce further quantities.
89	!------------------------------------------------------------------------------!
90
91	USE arrays_3d
92	USE constants
93	USE control_parameters
94	USE dvrp_variables
95	USE grid_variables
96	USE indices
97	USE model_1d
98	USE netcdf_control
99	USE particle_attributes
100	USE pegrid
101	USE profil_parameter
102	USE statistics
103	USE transpose_indices
104
105	IMPLICIT NONE
106
107	CHARACTER (LEN=1) :: sq
108	CHARACTER (LEN=6) :: var
109	CHARACTER (LEN=7) :: unit
110	CHARACTER (LEN=8) :: date
111	CHARACTER (LEN=10) :: time
112	CHARACTER (LEN=40) :: coupling_string
113	CHARACTER (LEN=100) :: action
114
115	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
116	position, prec
117	LOGICAL :: found, ldum
118	REAL :: gradient, maxn, maxp, remote = 0.0, &
119	simulation_time_since_reference
120
121	!
122	!-- Warning, if host is not set
123	IF ( host(1:1) == ' ' ) THEN
124	message_string = '"host" is not set. Please check that environment ' // &
125	'variable "localhost" & is set before running PALM'
126	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
127	ENDIF
128
129	!
130	!-- Check the coupling mode
131	IF ( coupling_mode /= 'uncoupled' .AND. &
132	coupling_mode /= 'atmosphere_to_ocean' .AND. &
133	coupling_mode /= 'ocean_to_atmosphere' ) THEN
134	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
135	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
136	ENDIF
137
138	!
139	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
140	IF ( coupling_mode /= 'uncoupled' ) THEN
141
142	IF ( dt_coupling == 9999999.9 ) THEN
143	message_string = 'dt_coupling is not set but required for coup' // &
144	'ling mode "' // TRIM( coupling_mode ) // '"'
145	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
146	ENDIF
147
148	#if defined( __parallel )
149	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
150	ierr )
151	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
152	status, ierr )
153	IF ( dt_coupling /= remote ) THEN
154	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
155	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
156	'dt_coupling_remote = ', remote
157	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
158	ENDIF
159	IF ( dt_coupling <= 0.0 ) THEN
160	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
161	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
162	status, ierr )
163	dt_coupling = MAX( dt_max, remote )
164	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
165	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
166	'MAX(dt_max(A,O)) = ', dt_coupling
167	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
168	ENDIF
169
170	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
171	ierr )
172	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
173	status, ierr )
174	IF ( restart_time /= remote ) THEN
175	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
176	'": restart_time = ', restart_time, '& is not equal to ', &
177	'restart_time_remote = ', remote
178	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
179	ENDIF
180
181	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
182	ierr )
183	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
184	status, ierr )
185	IF ( dt_restart /= remote ) THEN
186	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
187	'": dt_restart = ', dt_restart, '& is not equal to ', &
188	'dt_restart_remote = ', remote
189	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
190	ENDIF
191
192	simulation_time_since_reference = end_time - coupling_start_time
193	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
194	14, comm_inter, ierr )
195	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
196	status, ierr )
197	IF ( simulation_time_since_reference /= remote ) THEN
198	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
199	'": simulation_time_since_reference = ', &
200	simulation_time_since_reference, '& is not equal to ', &
201	'simulation_time_since_reference_remote = ', remote
202	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
203	ENDIF
204
205	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
206	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
207	status, ierr )
208	IF ( dx /= remote ) THEN
209	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
210	'": dx = ', dx, '& is not equal to dx_remote = ', remote
211	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
212	ENDIF
213
214	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
215	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
216	status, ierr )
217	IF ( dy /= remote ) THEN
218	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
219	'": dy = ', dy, '& is not equal to dy_remote = ', remote
220	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
221	ENDIF
222
223	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
224	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
225	status, ierr )
226	IF ( nx /= iremote ) THEN
227	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
228	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
229	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
230	ENDIF
231
232	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
233	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
234	status, ierr )
235	IF ( ny /= iremote ) THEN
236	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
237	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
238	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
239	ENDIF
240	#else
241	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
242	' ''mrun -K parallel'''
243	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
244	#endif
245	ENDIF
246
247	#if defined( __parallel )
248	!
249	!-- Exchange via intercommunicator
250	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
251	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
252	ierr )
253	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
254	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
255	comm_inter, status, ierr )
256	ENDIF
257	#endif
258
259
260	!
261	!-- Generate the file header which is used as a header for most of PALM's
262	!-- output files
263	CALL DATE_AND_TIME( date, time )
264	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
265	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
266	IF ( coupling_mode == 'uncoupled' ) THEN
267	coupling_string = ''
268	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
269	coupling_string = ' coupled (atmosphere)'
270	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
271	coupling_string = ' coupled (ocean)'
272	ENDIF
273
274	WRITE ( run_description_header, &
275	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
276	TRIM( version ), TRIM( revision ), 'run: ', &
277	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
278	'host: ', TRIM( host ), run_date, run_time
279
280	!
281	!-- Check the general loop optimization method
282	IF ( loop_optimization == 'default' ) THEN
283	IF ( host(1:3) == 'nec' ) THEN
284	loop_optimization = 'vector'
285	ELSE
286	loop_optimization = 'cache'
287	ENDIF
288	ENDIF
289	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
290	.AND. loop_optimization /= 'vector' ) THEN
291	message_string = 'illegal value given for loop_optimization: "' // &
292	TRIM( loop_optimization ) // '"'
293	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
294	ENDIF
295
296	!
297	!-- Check topography setting (check for illegal parameter combinations)
298	IF ( topography /= 'flat' ) THEN
299	action = ' '
300	IF ( scalar_advec /= 'pw-scheme' ) THEN
301	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
302	ENDIF
303	IF ( momentum_advec /= 'pw-scheme' ) THEN
304	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
305	ENDIF
306	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
307	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
308	ENDIF
309	IF ( psolver == 'sor' ) THEN
310	WRITE( action, '(A,A)' ) 'psolver = ', psolver
311	ENDIF
312	IF ( sloping_surface ) THEN
313	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
314	ENDIF
315	IF ( galilei_transformation ) THEN
316	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
317	ENDIF
318	IF ( cloud_physics ) THEN
319	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
320	ENDIF
321	IF ( cloud_droplets ) THEN
322	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
323	ENDIF
324	IF ( humidity ) THEN
325	WRITE( action, '(A)' ) 'humidity = .TRUE.'
326	ENDIF
327	IF ( .NOT. prandtl_layer ) THEN
328	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
329	ENDIF
330	IF ( action /= ' ' ) THEN
331	message_string = 'a non-flat topography does not allow ' // &
332	TRIM( action )
333	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
334	ENDIF
335	!
336	!-- In case of non-flat topography, check whether the convention how to
337	!-- define the topography grid has been set correctly, or whether the default
338	!-- is applicable. If this is not possible, abort.
339	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
340	IF ( TRIM( topography ) /= 'single_building' .AND. &
341	TRIM( topography ) /= 'single_street_canyon' .AND. &
342	TRIM( topography ) /= 'read_from_file' ) THEN
343	!-- The default value is not applicable here, because it is only valid
344	!-- for the two standard cases 'single_building' and 'read_from_file'
345	!-- defined in init_grid.
346	WRITE( message_string, * ) &
347	'The value for "topography_grid_convention" ', &
348	'is not set. Its default value is & only valid for ', &
349	'"topography" = ''single_building'', ', &
350	'''single_street_canyon'' & or ''read_from_file''.', &
351	' & Choose ''cell_edge'' or ''cell_center''.'
352	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
353	ELSE
354	!-- The default value is applicable here.
355	!-- Set convention according to topography.
356	IF ( TRIM( topography ) == 'single_building' .OR. &
357	TRIM( topography ) == 'single_street_canyon' ) THEN
358	topography_grid_convention = 'cell_edge'
359	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
360	topography_grid_convention = 'cell_center'
361	ENDIF
362	ENDIF
363	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
364	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
365	WRITE( message_string, * ) &
366	'The value for "topography_grid_convention" is ', &
367	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
368	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
369	ENDIF
370
371	ENDIF
372
373	!
374	!-- Check ocean setting
375	IF ( ocean ) THEN
376	action = ' '
377	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
378	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
379	ENDIF
380	IF ( momentum_advec == 'ups-scheme' ) THEN
381	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
382	ENDIF
383	IF ( action /= ' ' ) THEN
384	message_string = 'ocean = .T. does not allow ' // TRIM( action )
385	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
386	ENDIF
387	ENDIF
388
389	!
390	!-- Check whether an (uncoupled) atmospheric run has been declared as an
391	!-- ocean run (this setting is done via mrun-option -y)
392	IF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
393	TRIM( coupling_char ) == '_O' ) THEN
394	message_string = 'ocean = .F. does not allow coupling_char = "' // &
395	TRIM( coupling_char ) // '" set by mrun-option "-y"'
396	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
397	ENDIF
398
399	!
400	!-- Check whether there are any illegal values
401	!-- Pressure solver:
402	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
403	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
404	message_string = 'unknown solver for perturbation pressure: psolver' // &
405	' = "' // TRIM( psolver ) // '"'
406	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
407	ENDIF
408
409	#if defined( __parallel )
410	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
411	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
412	'for a 1d domain-decomposition along x & please do' // &
413	' not set npey/=1 in the parameter file'
414	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
415	ENDIF
416	IF ( psolver == 'poisfft_hybrid' .AND. &
417	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
418	psolver == 'multigrid' .AND. &
419	( nxra > nxr .OR. nyna > nyn ) ) THEN
420	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
421	'work for subdomains with unequal size & please ' // &
422	'set grid_matching = ''strict'' in the parameter file'
423	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
424	ENDIF
425	#else
426	IF ( psolver == 'poisfft_hybrid' ) THEN
427	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
428	' for a parallel environment'
429	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
430	ENDIF
431	#endif
432
433	IF ( psolver == 'multigrid' ) THEN
434	IF ( cycle_mg == 'w' ) THEN
435	gamma_mg = 2
436	ELSEIF ( cycle_mg == 'v' ) THEN
437	gamma_mg = 1
438	ELSE
439	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
440	TRIM( cycle_mg ) // '"'
441	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
442	ENDIF
443	ENDIF
444
445	IF ( fft_method /= 'singleton-algorithm' .AND. &
446	fft_method /= 'temperton-algorithm' .AND. &
447	fft_method /= 'system-specific' ) THEN
448	message_string = 'unknown fft-algorithm: fft_method = "' // &
449	TRIM( fft_method ) // '"'
450	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
451	ENDIF
452
453	!
454	!-- Advection schemes:
455	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
456	THEN
457	message_string = 'unknown advection scheme: momentum_advec = "' // &
458	TRIM( momentum_advec ) // '"'
459	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
460	ENDIF
461	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
462	.AND. timestep_scheme /= 'euler' ) THEN
463	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
464	'" is not allowed with timestep_scheme = "' // &
465	TRIM( timestep_scheme ) // '"'
466	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
467	ENDIF
468
469	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
470	scalar_advec /= 'ups-scheme' ) THEN
471	message_string = 'unknown advection scheme: scalar_advec = "' // &
472	TRIM( scalar_advec ) // '"'
473	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
474	ENDIF
475
476	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
477	use_upstream_for_tke = .TRUE.
478	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
479	'use_sgs_for_particles = .TRUE.'
480	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
481	ENDIF
482
483	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
484	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
485	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
486	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
487	ENDIF
488
489	!
490	!-- Timestep schemes:
491	SELECT CASE ( TRIM( timestep_scheme ) )
492
493	CASE ( 'euler' )
494	intermediate_timestep_count_max = 1
495	asselin_filter_factor = 0.0
496
497	CASE ( 'leapfrog', 'leapfrog+euler' )
498	intermediate_timestep_count_max = 1
499
500	CASE ( 'runge-kutta-2' )
501	intermediate_timestep_count_max = 2
502	asselin_filter_factor = 0.0
503
504	CASE ( 'runge-kutta-3' )
505	intermediate_timestep_count_max = 3
506	asselin_filter_factor = 0.0
507
508	CASE DEFAULT
509	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
510	TRIM( timestep_scheme ) // '"'
511	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
512
513	END SELECT
514
515	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
516	THEN
517	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
518	'" & does not work with timestep_scheme "' // &
519	TRIM( timestep_scheme ) // '"'
520	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
521	ENDIF
522
523	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
524	THEN
525	message_string = 'momentum advection scheme "' // &
526	TRIM( momentum_advec ) // '" & does not work with ' // &
527	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
528	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
529	ENDIF
530
531	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
532	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
533	!
534	!-- No restart run: several initialising actions are possible
535	action = initializing_actions
536	DO WHILE ( TRIM( action ) /= '' )
537	position = INDEX( action, ' ' )
538	SELECT CASE ( action(1:position-1) )
539
540	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
541	'by_user', 'initialize_vortex', 'initialize_ptanom' )
542	action = action(position+1:)
543
544	CASE DEFAULT
545	message_string = 'initializing_action = "' // &
546	TRIM( action ) // '" unkown or not allowed'
547	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
548
549	END SELECT
550	ENDDO
551	ENDIF
552
553	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
554	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
555	message_string = 'initializing_actions = "set_constant_profiles"' // &
556	' and "set_1d-model_profiles" are not allowed ' // &
557	'simultaneously'
558	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
559	ENDIF
560
561	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
562	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
563	message_string = 'initializing_actions = "set_constant_profiles"' // &
564	' and "by_user" are not allowed simultaneously'
565	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
566	ENDIF
567
568	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
569	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
570	message_string = 'initializing_actions = "by_user" and ' // &
571	'"set_1d-model_profiles" are not allowed simultaneously'
572	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
573	ENDIF
574
575	IF ( cloud_physics .AND. .NOT. humidity ) THEN
576	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
577	'not allowed with humidity = ', humidity
578	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
579	ENDIF
580
581	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
582	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
583	'not allowed with cloud_physics = ', cloud_physics
584	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
585	ENDIF
586
587	IF ( humidity .AND. sloping_surface ) THEN
588	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
589	'are not allowed simultaneously'
590	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
591	ENDIF
592
593	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
594	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
595	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
596	ENDIF
597
598	IF ( passive_scalar .AND. humidity ) THEN
599	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
600	'is not allowed simultaneously'
601	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
602	ENDIF
603
604	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
605	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
606	' = .TRUE.'
607	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
608	ENDIF
609
610	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
611	message_string = 'illegal value "' // TRIM( grid_matching ) // &
612	'" found for parameter grid_matching'
613	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
614	ENDIF
615
616	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
617	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
618	'coefficient & given value is drag_coefficient = 0.0'
619	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
620	ENDIF
621
622	!
623	!-- In case of no model continuation run, check initialising parameters and
624	!-- deduce further quantities
625	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
626
627	!
628	!-- Initial profiles for 1D and 3D model, respectively
629	u_init = ug_surface
630	v_init = vg_surface
631	pt_init = pt_surface
632	IF ( humidity ) q_init = q_surface
633	IF ( ocean ) sa_init = sa_surface
634	IF ( passive_scalar ) q_init = s_surface
635	IF ( plant_canopy ) lad = 0.0
636
637	!
638	!--
639	!-- If required, compute initial profile of the geostrophic wind
640	!-- (component ug)
641	i = 1
642	gradient = 0.0
643
644	IF ( .NOT. ocean ) THEN
645
646	ug_vertical_gradient_level_ind(1) = 0
647	ug(0) = ug_surface
648	DO k = 1, nzt+1
649	IF ( i < 11 ) THEN
650	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
651	ug_vertical_gradient_level(i) >= 0.0 ) THEN
652	gradient = ug_vertical_gradient(i) / 100.0
653	ug_vertical_gradient_level_ind(i) = k - 1
654	i = i + 1
655	ENDIF
656	ENDIF
657	IF ( gradient /= 0.0 ) THEN
658	IF ( k /= 1 ) THEN
659	ug(k) = ug(k-1) + dzu(k) * gradient
660	ELSE
661	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
662	ENDIF
663	ELSE
664	ug(k) = ug(k-1)
665	ENDIF
666	ENDDO
667
668	ELSE
669
670	ug_vertical_gradient_level_ind(1) = nzt+1
671	ug(nzt+1) = ug_surface
672	DO k = nzt, 0, -1
673	IF ( i < 11 ) THEN
674	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
675	ug_vertical_gradient_level(i) <= 0.0 ) THEN
676	gradient = ug_vertical_gradient(i) / 100.0
677	ug_vertical_gradient_level_ind(i) = k + 1
678	i = i + 1
679	ENDIF
680	ENDIF
681	IF ( gradient /= 0.0 ) THEN
682	IF ( k /= nzt ) THEN
683	ug(k) = ug(k+1) - dzu(k+1) * gradient
684	ELSE
685	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
686	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
687	ENDIF
688	ELSE
689	ug(k) = ug(k+1)
690	ENDIF
691	ENDDO
692
693	ENDIF
694
695	u_init = ug
696
697	!
698	!-- In case of no given gradients for ug, choose a vanishing gradient
699	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
700	ug_vertical_gradient_level(1) = 0.0
701	ENDIF
702
703	!
704	!--
705	!-- If required, compute initial profile of the geostrophic wind
706	!-- (component vg)
707	i = 1
708	gradient = 0.0
709
710	IF ( .NOT. ocean ) THEN
711
712	vg_vertical_gradient_level_ind(1) = 0
713	vg(0) = vg_surface
714	DO k = 1, nzt+1
715	IF ( i < 11 ) THEN
716	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
717	vg_vertical_gradient_level(i) >= 0.0 ) THEN
718	gradient = vg_vertical_gradient(i) / 100.0
719	vg_vertical_gradient_level_ind(i) = k - 1
720	i = i + 1
721	ENDIF
722	ENDIF
723	IF ( gradient /= 0.0 ) THEN
724	IF ( k /= 1 ) THEN
725	vg(k) = vg(k-1) + dzu(k) * gradient
726	ELSE
727	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
728	ENDIF
729	ELSE
730	vg(k) = vg(k-1)
731	ENDIF
732	ENDDO
733
734	ELSE
735
736	vg_vertical_gradient_level_ind(1) = nzt+1
737	vg(nzt+1) = vg_surface
738	DO k = nzt, 0, -1
739	IF ( i < 11 ) THEN
740	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
741	vg_vertical_gradient_level(i) <= 0.0 ) THEN
742	gradient = vg_vertical_gradient(i) / 100.0
743	vg_vertical_gradient_level_ind(i) = k + 1
744	i = i + 1
745	ENDIF
746	ENDIF
747	IF ( gradient /= 0.0 ) THEN
748	IF ( k /= nzt ) THEN
749	vg(k) = vg(k+1) - dzu(k+1) * gradient
750	ELSE
751	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
752	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
753	ENDIF
754	ELSE
755	vg(k) = vg(k+1)
756	ENDIF
757	ENDDO
758
759	ENDIF
760
761	v_init = vg
762
763	!
764	!-- In case of no given gradients for vg, choose a vanishing gradient
765	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
766	vg_vertical_gradient_level(1) = 0.0
767	ENDIF
768
769	!
770	!-- Compute initial temperature profile using the given temperature gradients
771	i = 1
772	gradient = 0.0
773
774	IF ( .NOT. ocean ) THEN
775
776	pt_vertical_gradient_level_ind(1) = 0
777	DO k = 1, nzt+1
778	IF ( i < 11 ) THEN
779	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
780	pt_vertical_gradient_level(i) >= 0.0 ) THEN
781	gradient = pt_vertical_gradient(i) / 100.0
782	pt_vertical_gradient_level_ind(i) = k - 1
783	i = i + 1
784	ENDIF
785	ENDIF
786	IF ( gradient /= 0.0 ) THEN
787	IF ( k /= 1 ) THEN
788	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
789	ELSE
790	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
791	ENDIF
792	ELSE
793	pt_init(k) = pt_init(k-1)
794	ENDIF
795	ENDDO
796
797	ELSE
798
799	pt_vertical_gradient_level_ind(1) = nzt+1
800	DO k = nzt, 0, -1
801	IF ( i < 11 ) THEN
802	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
803	pt_vertical_gradient_level(i) <= 0.0 ) THEN
804	gradient = pt_vertical_gradient(i) / 100.0
805	pt_vertical_gradient_level_ind(i) = k + 1
806	i = i + 1
807	ENDIF
808	ENDIF
809	IF ( gradient /= 0.0 ) THEN
810	IF ( k /= nzt ) THEN
811	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
812	ELSE
813	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
814	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
815	ENDIF
816	ELSE
817	pt_init(k) = pt_init(k+1)
818	ENDIF
819	ENDDO
820
821	ENDIF
822
823	!
824	!-- In case of no given temperature gradients, choose gradient of neutral
825	!-- stratification
826	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
827	pt_vertical_gradient_level(1) = 0.0
828	ENDIF
829
830	!
831	!-- Store temperature gradient at the top boundary for possible Neumann
832	!-- boundary condition
833	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
834
835	!
836	!-- If required, compute initial humidity or scalar profile using the given
837	!-- humidity/scalar gradient. In case of scalar transport, initially store
838	!-- values of the scalar parameters on humidity parameters
839	IF ( passive_scalar ) THEN
840	bc_q_b = bc_s_b
841	bc_q_t = bc_s_t
842	q_surface = s_surface
843	q_surface_initial_change = s_surface_initial_change
844	q_vertical_gradient = s_vertical_gradient
845	q_vertical_gradient_level = s_vertical_gradient_level
846	surface_waterflux = surface_scalarflux
847	ENDIF
848
849	IF ( humidity .OR. passive_scalar ) THEN
850
851	i = 1
852	gradient = 0.0
853	q_vertical_gradient_level_ind(1) = 0
854	DO k = 1, nzt+1
855	IF ( i < 11 ) THEN
856	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
857	q_vertical_gradient_level(i) >= 0.0 ) THEN
858	gradient = q_vertical_gradient(i) / 100.0
859	q_vertical_gradient_level_ind(i) = k - 1
860	i = i + 1
861	ENDIF
862	ENDIF
863	IF ( gradient /= 0.0 ) THEN
864	IF ( k /= 1 ) THEN
865	q_init(k) = q_init(k-1) + dzu(k) * gradient
866	ELSE
867	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
868	ENDIF
869	ELSE
870	q_init(k) = q_init(k-1)
871	ENDIF
872	!
873	!-- Avoid negative humidities
874	IF ( q_init(k) < 0.0 ) THEN
875	q_init(k) = 0.0
876	ENDIF
877	ENDDO
878
879	!
880	!-- In case of no given humidity gradients, choose zero gradient
881	!-- conditions
882	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
883	q_vertical_gradient_level(1) = 0.0
884	ENDIF
885
886	!
887	!-- Store humidity gradient at the top boundary for possile Neumann
888	!-- boundary condition
889	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
890
891	ENDIF
892
893	!
894	!-- If required, compute initial salinity profile using the given salinity
895	!-- gradients
896	IF ( ocean ) THEN
897
898	i = 1
899	gradient = 0.0
900
901	sa_vertical_gradient_level_ind(1) = nzt+1
902	DO k = nzt, 0, -1
903	IF ( i < 11 ) THEN
904	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
905	sa_vertical_gradient_level(i) <= 0.0 ) THEN
906	gradient = sa_vertical_gradient(i) / 100.0
907	sa_vertical_gradient_level_ind(i) = k + 1
908	i = i + 1
909	ENDIF
910	ENDIF
911	IF ( gradient /= 0.0 ) THEN
912	IF ( k /= nzt ) THEN
913	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
914	ELSE
915	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
916	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
917	ENDIF
918	ELSE
919	sa_init(k) = sa_init(k+1)
920	ENDIF
921	ENDDO
922
923	ENDIF
924
925	!
926	!-- If required compute the profile of leaf area density used in the plant canopy model
927	IF ( plant_canopy ) THEN
928
929	i = 1
930	gradient = 0.0
931
932	IF ( .NOT. ocean ) THEN
933
934	lad(0) = lad_surface
935
936	lad_vertical_gradient_level_ind(1) = 0
937	DO k = 1, pch_index
938	IF ( i < 11 ) THEN
939	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
940	lad_vertical_gradient_level(i) >= 0.0 ) THEN
941	gradient = lad_vertical_gradient(i)
942	lad_vertical_gradient_level_ind(i) = k - 1
943	i = i + 1
944	ENDIF
945	ENDIF
946	IF ( gradient /= 0.0 ) THEN
947	IF ( k /= 1 ) THEN
948	lad(k) = lad(k-1) + dzu(k) * gradient
949	ELSE
950	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
951	ENDIF
952	ELSE
953	lad(k) = lad(k-1)
954	ENDIF
955	ENDDO
956
957	ENDIF
958
959	!
960	!-- In case of no given leaf area density gradients, choose a vanishing gradient
961	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
962	lad_vertical_gradient_level(1) = 0.0
963	ENDIF
964
965	ENDIF
966
967	ENDIF
968
969	!
970	!-- Compute Coriolis parameter
971	f = 2.0 * omega * SIN( phi / 180.0 * pi )
972	fs = 2.0 * omega * COS( phi / 180.0 * pi )
973
974	!
975	!-- Ocean runs always use reference values in the buoyancy term. Therefore
976	!-- set the reference temperature equal to the surface temperature.
977	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
978
979	!
980	!-- Reference value has to be used in buoyancy terms
981	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
982
983	!
984	!-- Sign of buoyancy/stability terms
985	IF ( ocean ) atmos_ocean_sign = -1.0
986
987	!
988	!-- Ocean version must use flux boundary conditions at the top
989	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
990	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
991	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
992	ENDIF
993
994	!
995	!-- In case of a given slope, compute the relevant quantities
996	IF ( alpha_surface /= 0.0 ) THEN
997	IF ( ABS( alpha_surface ) > 90.0 ) THEN
998	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
999	' ) must be < 90.0'
1000	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1001	ENDIF
1002	sloping_surface = .TRUE.
1003	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1004	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1005	ENDIF
1006
1007	!
1008	!-- Check time step and cfl_factor
1009	IF ( dt /= -1.0 ) THEN
1010	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1011	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1012	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1013	ENDIF
1014	dt_3d = dt
1015	dt_fixed = .TRUE.
1016	ENDIF
1017
1018	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1019	IF ( cfl_factor == -1.0 ) THEN
1020	IF ( momentum_advec == 'ups-scheme' .OR. &
1021	scalar_advec == 'ups-scheme' ) THEN
1022	cfl_factor = 0.8
1023	ELSE
1024	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1025	cfl_factor = 0.8
1026	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1027	cfl_factor = 0.9
1028	ELSE
1029	cfl_factor = 0.1
1030	ENDIF
1031	ENDIF
1032	ELSE
1033	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1034	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1035	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1036	ENDIF
1037	ENDIF
1038
1039	!
1040	!-- Store simulated time at begin
1041	simulated_time_at_begin = simulated_time
1042
1043	!
1044	!-- Store reference time for coupled runs and change the coupling flag,
1045	!-- if ...
1046	IF ( simulated_time == 0.0 ) THEN
1047	IF ( coupling_start_time == 0.0 ) THEN
1048	time_since_reference_point = 0.0
1049	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1050	run_coupled = .FALSE.
1051	ENDIF
1052	ENDIF
1053
1054	!
1055	!-- Set wind speed in the Galilei-transformed system
1056	IF ( galilei_transformation ) THEN
1057	IF ( use_ug_for_galilei_tr .AND. &
1058	ug_vertical_gradient_level(1) == 0.0 .AND. &
1059	vg_vertical_gradient_level(1) == 0.0 ) THEN
1060	u_gtrans = ug_surface
1061	v_gtrans = vg_surface
1062	ELSEIF ( use_ug_for_galilei_tr .AND. &
1063	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1064	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1065	' with galilei transformation'
1066	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1067	ELSEIF ( use_ug_for_galilei_tr .AND. &
1068	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1069	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1070	' with galilei transformation'
1071	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1072	ELSE
1073	message_string = 'variable translation speed used for galilei-' // &
1074	'transformation, which may cause & instabilities in stably ' // &
1075	'stratified regions'
1076	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1077	ENDIF
1078	ENDIF
1079
1080	!
1081	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1082	!-- fluxes have to be used in the diffusion-terms
1083	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1084
1085	!
1086	!-- Check boundary conditions and set internal variables:
1087	!-- Lateral boundary conditions
1088	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1089	bc_lr /= 'radiation/dirichlet' ) THEN
1090	message_string = 'unknown boundary condition: bc_lr = "' // &
1091	TRIM( bc_lr ) // '"'
1092	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1093	ENDIF
1094	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1095	bc_ns /= 'radiation/dirichlet' ) THEN
1096	message_string = 'unknown boundary condition: bc_ns = "' // &
1097	TRIM( bc_ns ) // '"'
1098	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1099	ENDIF
1100
1101	!
1102	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1103	!-- Willimas advection scheme. Several schemes and tools do not work with
1104	!-- non-cyclic boundary conditions.
1105	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1106	IF ( psolver /= 'multigrid' ) THEN
1107	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1108	'psolver = "' // TRIM( psolver ) // '"'
1109	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1110	ENDIF
1111	IF ( momentum_advec /= 'pw-scheme' ) THEN
1112	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1113	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1114	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1115	ENDIF
1116	IF ( scalar_advec /= 'pw-scheme' ) THEN
1117	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1118	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1119	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1120	ENDIF
1121	IF ( galilei_transformation ) THEN
1122	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1123	'galilei_transformation = .T.'
1124	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1125	ENDIF
1126	ENDIF
1127
1128	!
1129	!-- Bottom boundary condition for the turbulent Kinetic energy
1130	IF ( bc_e_b == 'neumann' ) THEN
1131	ibc_e_b = 1
1132	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1133	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1134	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1135	ENDIF
1136	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1137	ibc_e_b = 2
1138	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1139	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1140	TRIM( bc_e_b ) // '"'
1141	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1142	ENDIF
1143	IF ( .NOT. prandtl_layer ) THEN
1144	bc_e_b = 'neumann'
1145	ibc_e_b = 1
1146	message_string = 'boundary condition bc_e_b changed to "' // &
1147	TRIM( bc_e_b ) // '"'
1148	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1149	ENDIF
1150	ELSE
1151	message_string = 'unknown boundary condition: bc_e_b = "' // &
1152	TRIM( bc_e_b ) // '"'
1153	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1154	ENDIF
1155
1156	!
1157	!-- Boundary conditions for perturbation pressure
1158	IF ( bc_p_b == 'dirichlet' ) THEN
1159	ibc_p_b = 0
1160	ELSEIF ( bc_p_b == 'neumann' ) THEN
1161	ibc_p_b = 1
1162	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1163	ibc_p_b = 2
1164	ELSE
1165	message_string = 'unknown boundary condition: bc_p_b = "' // &
1166	TRIM( bc_p_b ) // '"'
1167	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1168	ENDIF
1169	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1170	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1171	'" not allowed with prandtl_layer = .FALSE.'
1172	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1173	ENDIF
1174	IF ( bc_p_t == 'dirichlet' ) THEN
1175	ibc_p_t = 0
1176	ELSEIF ( bc_p_t == 'neumann' ) THEN
1177	ibc_p_t = 1
1178	ELSE
1179	message_string = 'unknown boundary condition: bc_p_t = "' // &
1180	TRIM( bc_p_t ) // '"'
1181	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1182	ENDIF
1183
1184	!
1185	!-- Boundary conditions for potential temperature
1186	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1187	ibc_pt_b = 2
1188	ELSE
1189	IF ( bc_pt_b == 'dirichlet' ) THEN
1190	ibc_pt_b = 0
1191	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1192	ibc_pt_b = 1
1193	ELSE
1194	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1195	TRIM( bc_pt_b ) // '"'
1196	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1197	ENDIF
1198	ENDIF
1199
1200	IF ( bc_pt_t == 'dirichlet' ) THEN
1201	ibc_pt_t = 0
1202	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1203	ibc_pt_t = 1
1204	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1205	ibc_pt_t = 2
1206	ELSE
1207	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1208	TRIM( bc_pt_t ) // '"'
1209	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1210	ENDIF
1211
1212	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1213	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1214	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1215	top_momentumflux_v /= 9999999.9 ) THEN
1216	constant_top_momentumflux = .TRUE.
1217	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1218	top_momentumflux_v == 9999999.9 ) ) THEN
1219	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1220	'must be set'
1221	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1222	ENDIF
1223
1224	!
1225	!-- A given surface temperature implies Dirichlet boundary condition for
1226	!-- temperature. In this case specification of a constant heat flux is
1227	!-- forbidden.
1228	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1229	surface_heatflux /= 0.0 ) THEN
1230	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1231	'& is not allowed with constant_heatflux = .TRUE.'
1232	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1233	ENDIF
1234	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1235	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1236	'wed with pt_surface_initial_change (/=0) = ', &
1237	pt_surface_initial_change
1238	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1239	ENDIF
1240
1241	!
1242	!-- A given temperature at the top implies Dirichlet boundary condition for
1243	!-- temperature. In this case specification of a constant heat flux is
1244	!-- forbidden.
1245	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1246	top_heatflux /= 0.0 ) THEN
1247	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1248	'" is not allowed with constant_top_heatflux = .TRUE.'
1249	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1250	ENDIF
1251
1252	!
1253	!-- Boundary conditions for salinity
1254	IF ( ocean ) THEN
1255	IF ( bc_sa_t == 'dirichlet' ) THEN
1256	ibc_sa_t = 0
1257	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1258	ibc_sa_t = 1
1259	ELSE
1260	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1261	TRIM( bc_sa_t ) // '"'
1262	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1263	ENDIF
1264
1265	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1266	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1267	message_string = 'boundary condition: bc_sa_t = "' // &
1268	TRIM( bc_sa_t ) // '" requires to set ' // &
1269	'top_salinityflux'
1270	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1271	ENDIF
1272
1273	!
1274	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1275	!-- salinity. In this case specification of a constant salinity flux is
1276	!-- forbidden.
1277	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1278	top_salinityflux /= 0.0 ) THEN
1279	message_string = 'boundary condition: bc_sa_t = "' // &
1280	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1281	'constant_top_salinityflux = .TRUE.'
1282	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1283	ENDIF
1284
1285	ENDIF
1286
1287	!
1288	!-- In case of humidity or passive scalar, set boundary conditions for total
1289	!-- water content / scalar
1290	IF ( humidity .OR. passive_scalar ) THEN
1291	IF ( humidity ) THEN
1292	sq = 'q'
1293	ELSE
1294	sq = 's'
1295	ENDIF
1296	IF ( bc_q_b == 'dirichlet' ) THEN
1297	ibc_q_b = 0
1298	ELSEIF ( bc_q_b == 'neumann' ) THEN
1299	ibc_q_b = 1
1300	ELSE
1301	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1302	'_b ="' // TRIM( bc_q_b ) // '"'
1303	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1304	ENDIF
1305	IF ( bc_q_t == 'dirichlet' ) THEN
1306	ibc_q_t = 0
1307	ELSEIF ( bc_q_t == 'neumann' ) THEN
1308	ibc_q_t = 1
1309	ELSE
1310	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1311	'_t ="' // TRIM( bc_q_t ) // '"'
1312	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1313	ENDIF
1314
1315	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1316
1317	!
1318	!-- A given surface humidity implies Dirichlet boundary condition for
1319	!-- humidity. In this case specification of a constant water flux is
1320	!-- forbidden.
1321	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1322	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1323	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1324	'th prescribed surface flux'
1325	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1326	ENDIF
1327	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1328	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1329	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1330	q_surface_initial_change
1331	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1332	ENDIF
1333
1334	ENDIF
1335
1336	!
1337	!-- Boundary conditions for horizontal components of wind speed
1338	IF ( bc_uv_b == 'dirichlet' ) THEN
1339	ibc_uv_b = 0
1340	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1341	ibc_uv_b = 1
1342	IF ( prandtl_layer ) THEN
1343	message_string = 'boundary condition: bc_uv_b = "' // &
1344	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1345	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1346	ENDIF
1347	ELSE
1348	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1349	TRIM( bc_uv_b ) // '"'
1350	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1351	ENDIF
1352
1353	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1354	bc_uv_t = 'neumann'
1355	ibc_uv_t = 1
1356	ELSE
1357	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1358	ibc_uv_t = 0
1359	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1360	ibc_uv_t = 1
1361	ELSE
1362	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1363	TRIM( bc_uv_t ) // '"'
1364	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1365	ENDIF
1366	ENDIF
1367
1368	!
1369	!-- Compute and check, respectively, the Rayleigh Damping parameter
1370	IF ( rayleigh_damping_factor == -1.0 ) THEN
1371	IF ( momentum_advec == 'ups-scheme' ) THEN
1372	rayleigh_damping_factor = 0.01
1373	ELSE
1374	rayleigh_damping_factor = 0.0
1375	ENDIF
1376	ELSE
1377	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1378	THEN
1379	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1380	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1381	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1382	ENDIF
1383	ENDIF
1384
1385	IF ( rayleigh_damping_height == -1.0 ) THEN
1386	IF ( .NOT. ocean ) THEN
1387	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1388	ELSE
1389	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1390	ENDIF
1391	ELSE
1392	IF ( .NOT. ocean ) THEN
1393	IF ( rayleigh_damping_height < 0.0 .OR. &
1394	rayleigh_damping_height > zu(nzt) ) THEN
1395	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1396	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1397	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1398	ENDIF
1399	ELSE
1400	IF ( rayleigh_damping_height > 0.0 .OR. &
1401	rayleigh_damping_height < zu(nzb) ) THEN
1402	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1403	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1404	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1405	ENDIF
1406	ENDIF
1407	ENDIF
1408
1409	!
1410	!-- Check limiters for Upstream-Spline scheme
1411	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1412	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1413	overshoot_limit_e < 0.0 ) THEN
1414	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1415	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1416	ENDIF
1417	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1418	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1419	message_string = 'ups_limit_... < 0.0 is not allowed'
1420	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1421	ENDIF
1422
1423	!
1424	!-- Check number of chosen statistic regions. More than 10 regions are not
1425	!-- allowed, because so far no more than 10 corresponding output files can
1426	!-- be opened (cf. check_open)
1427	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1428	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1429	statistic_regions+1, ' but only 10 regions are allowed'
1430	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1431	ENDIF
1432	IF ( normalizing_region > statistic_regions .OR. &
1433	normalizing_region < 0) THEN
1434	WRITE ( message_string, * ) 'normalizing_region = ', &
1435	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1436	' (value of statistic_regions)'
1437	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1438	ENDIF
1439
1440	!
1441	!-- Check the interval for sorting particles.
1442	!-- Using particles as cloud droplets requires sorting after each timestep.
1443	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1444	dt_sort_particles = 0.0
1445	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1446	'_droplets = .TRUE.'
1447	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1448	ENDIF
1449
1450	!
1451	!-- Set the default intervals for data output, if necessary
1452	!-- NOTE: dt_dosp has already been set in package_parin
1453	IF ( dt_data_output /= 9999999.9 ) THEN
1454	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1455	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1456	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1457	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1458	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1459	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1460	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1461	ENDIF
1462
1463	!
1464	!-- Set the default skip time intervals for data output, if necessary
1465	IF ( skip_time_dopr == 9999999.9 ) &
1466	skip_time_dopr = skip_time_data_output
1467	IF ( skip_time_dosp == 9999999.9 ) &
1468	skip_time_dosp = skip_time_data_output
1469	IF ( skip_time_do2d_xy == 9999999.9 ) &
1470	skip_time_do2d_xy = skip_time_data_output
1471	IF ( skip_time_do2d_xz == 9999999.9 ) &
1472	skip_time_do2d_xz = skip_time_data_output
1473	IF ( skip_time_do2d_yz == 9999999.9 ) &
1474	skip_time_do2d_yz = skip_time_data_output
1475	IF ( skip_time_do3d == 9999999.9 ) &
1476	skip_time_do3d = skip_time_data_output
1477	IF ( skip_time_data_output_av == 9999999.9 ) &
1478	skip_time_data_output_av = skip_time_data_output
1479
1480	!
1481	!-- Check the average intervals (first for 3d-data, then for profiles and
1482	!-- spectra)
1483	IF ( averaging_interval > dt_data_output_av ) THEN
1484	WRITE( message_string, * ) 'averaging_interval = ', &
1485	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1486	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1487	ENDIF
1488
1489	IF ( averaging_interval_pr == 9999999.9 ) THEN
1490	averaging_interval_pr = averaging_interval
1491	ENDIF
1492
1493	IF ( averaging_interval_pr > dt_dopr ) THEN
1494	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1495	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1496	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1497	ENDIF
1498
1499	IF ( averaging_interval_sp == 9999999.9 ) THEN
1500	averaging_interval_sp = averaging_interval
1501	ENDIF
1502
1503	IF ( averaging_interval_sp > dt_dosp ) THEN
1504	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1505	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1506	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1507	ENDIF
1508
1509	!
1510	!-- Set the default interval for profiles entering the temporal average
1511	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1512	dt_averaging_input_pr = dt_averaging_input
1513	ENDIF
1514
1515	!
1516	!-- Set the default interval for the output of timeseries to a reasonable
1517	!-- value (tries to minimize the number of calls of flow_statistics)
1518	IF ( dt_dots == 9999999.9 ) THEN
1519	IF ( averaging_interval_pr == 0.0 ) THEN
1520	dt_dots = MIN( dt_run_control, dt_dopr )
1521	ELSE
1522	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1523	ENDIF
1524	ENDIF
1525
1526	!
1527	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1528	IF ( dt_averaging_input > averaging_interval ) THEN
1529	WRITE( message_string, * ) 'dt_averaging_input = ', &
1530	dt_averaging_input, ' must be <= averaging_interval = ', &
1531	averaging_interval
1532	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1533	ENDIF
1534
1535	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1536	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1537	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1538	averaging_interval_pr
1539	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1540	ENDIF
1541
1542	!
1543	!-- Set the default value for the integration interval of precipitation amount
1544	IF ( precipitation ) THEN
1545	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1546	precipitation_amount_interval = dt_do2d_xy
1547	ELSE
1548	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1549	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1550	precipitation_amount_interval, ' must not be larger than ', &
1551	'dt_do2d_xy = ', dt_do2d_xy
1552	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1553	ENDIF
1554	ENDIF
1555	ENDIF
1556
1557	!
1558	!-- Determine the number of output profiles and check whether they are
1559	!-- permissible
1560	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1561
1562	dopr_n = dopr_n + 1
1563	i = dopr_n
1564
1565	!
1566	!-- Determine internal profile number (for hom, homs)
1567	!-- and store height levels
1568	SELECT CASE ( TRIM( data_output_pr(i) ) )
1569
1570	CASE ( 'u', '#u' )
1571	dopr_index(i) = 1
1572	dopr_unit(i) = 'm/s'
1573	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1574	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1575	dopr_initial_index(i) = 5
1576	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1577	data_output_pr(i) = data_output_pr(i)(2:)
1578	ENDIF
1579
1580	CASE ( 'v', '#v' )
1581	dopr_index(i) = 2
1582	dopr_unit(i) = 'm/s'
1583	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1584	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1585	dopr_initial_index(i) = 6
1586	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1587	data_output_pr(i) = data_output_pr(i)(2:)
1588	ENDIF
1589
1590	CASE ( 'w' )
1591	dopr_index(i) = 3
1592	dopr_unit(i) = 'm/s'
1593	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1594
1595	CASE ( 'pt', '#pt' )
1596	IF ( .NOT. cloud_physics ) THEN
1597	dopr_index(i) = 4
1598	dopr_unit(i) = 'K'
1599	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1600	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1601	dopr_initial_index(i) = 7
1602	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1603	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1604	data_output_pr(i) = data_output_pr(i)(2:)
1605	ENDIF
1606	ELSE
1607	dopr_index(i) = 43
1608	dopr_unit(i) = 'K'
1609	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1610	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1611	dopr_initial_index(i) = 28
1612	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1613	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1614	data_output_pr(i) = data_output_pr(i)(2:)
1615	ENDIF
1616	ENDIF
1617
1618	CASE ( 'e' )
1619	dopr_index(i) = 8
1620	dopr_unit(i) = 'm2/s2'
1621	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1622	hom(nzb,2,8,:) = 0.0
1623
1624	CASE ( 'km', '#km' )
1625	dopr_index(i) = 9
1626	dopr_unit(i) = 'm2/s'
1627	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1628	hom(nzb,2,9,:) = 0.0
1629	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1630	dopr_initial_index(i) = 23
1631	hom(:,2,23,:) = hom(:,2,9,:)
1632	data_output_pr(i) = data_output_pr(i)(2:)
1633	ENDIF
1634
1635	CASE ( 'kh', '#kh' )
1636	dopr_index(i) = 10
1637	dopr_unit(i) = 'm2/s'
1638	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1639	hom(nzb,2,10,:) = 0.0
1640	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1641	dopr_initial_index(i) = 24
1642	hom(:,2,24,:) = hom(:,2,10,:)
1643	data_output_pr(i) = data_output_pr(i)(2:)
1644	ENDIF
1645
1646	CASE ( 'l', '#l' )
1647	dopr_index(i) = 11
1648	dopr_unit(i) = 'm'
1649	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1650	hom(nzb,2,11,:) = 0.0
1651	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1652	dopr_initial_index(i) = 25
1653	hom(:,2,25,:) = hom(:,2,11,:)
1654	data_output_pr(i) = data_output_pr(i)(2:)
1655	ENDIF
1656
1657	CASE ( 'w"u"' )
1658	dopr_index(i) = 12
1659	dopr_unit(i) = 'm2/s2'
1660	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1661	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1662
1663	CASE ( 'wu' )
1664	dopr_index(i) = 13
1665	dopr_unit(i) = 'm2/s2'
1666	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1667
1668	CASE ( 'w"v"' )
1669	dopr_index(i) = 14
1670	dopr_unit(i) = 'm2/s2'
1671	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1672	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1673
1674	CASE ( 'wv' )
1675	dopr_index(i) = 15
1676	dopr_unit(i) = 'm2/s2'
1677	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1678
1679	CASE ( 'w"pt"' )
1680	dopr_index(i) = 16
1681	dopr_unit(i) = 'K m/s'
1682	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1683
1684	CASE ( 'wpt' )
1685	dopr_index(i) = 17
1686	dopr_unit(i) = 'K m/s'
1687	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1688
1689	CASE ( 'wpt' )
1690	dopr_index(i) = 18
1691	dopr_unit(i) = 'K m/s'
1692	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1693
1694	CASE ( 'wu' )
1695	dopr_index(i) = 19
1696	dopr_unit(i) = 'm2/s2'
1697	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1698	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1699
1700	CASE ( 'wv' )
1701	dopr_index(i) = 20
1702	dopr_unit(i) = 'm2/s2'
1703	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1704	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1705
1706	CASE ( 'wptBC' )
1707	dopr_index(i) = 21
1708	dopr_unit(i) = 'K m/s'
1709	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1710
1711	CASE ( 'wptBC' )
1712	dopr_index(i) = 22
1713	dopr_unit(i) = 'K m/s'
1714	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1715
1716	CASE ( 'sa', '#sa' )
1717	IF ( .NOT. ocean ) THEN
1718	message_string = 'data_output_pr = ' // &
1719	TRIM( data_output_pr(i) ) // ' is not imp' // &
1720	'lemented for ocean = .FALSE.'
1721	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1722	ELSE
1723	dopr_index(i) = 23
1724	dopr_unit(i) = 'psu'
1725	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1726	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1727	dopr_initial_index(i) = 26
1728	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1729	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1730	data_output_pr(i) = data_output_pr(i)(2:)
1731	ENDIF
1732	ENDIF
1733
1734	CASE ( 'u*2' )
1735	dopr_index(i) = 30
1736	dopr_unit(i) = 'm2/s2'
1737	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1738
1739	CASE ( 'v*2' )
1740	dopr_index(i) = 31
1741	dopr_unit(i) = 'm2/s2'
1742	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1743
1744	CASE ( 'w*2' )
1745	dopr_index(i) = 32
1746	dopr_unit(i) = 'm2/s2'
1747	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1748
1749	CASE ( 'pt*2' )
1750	dopr_index(i) = 33
1751	dopr_unit(i) = 'K2'
1752	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1753
1754	CASE ( 'e*' )
1755	dopr_index(i) = 34
1756	dopr_unit(i) = 'm2/s2'
1757	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1758
1759	CASE ( 'w2pt' )
1760	dopr_index(i) = 35
1761	dopr_unit(i) = 'K m2/s2'
1762	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1763
1764	CASE ( 'wpt2' )
1765	dopr_index(i) = 36
1766	dopr_unit(i) = 'K2 m/s'
1767	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1768
1769	CASE ( 'we' )
1770	dopr_index(i) = 37
1771	dopr_unit(i) = 'm3/s3'
1772	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1773
1774	CASE ( 'w*3' )
1775	dopr_index(i) = 38
1776	dopr_unit(i) = 'm3/s3'
1777	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1778
1779	CASE ( 'Sw' )
1780	dopr_index(i) = 39
1781	dopr_unit(i) = 'none'
1782	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1783
1784	CASE ( 'p' )
1785	dopr_index(i) = 40
1786	dopr_unit(i) = 'Pa'
1787	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1788
1789	CASE ( 'q', '#q' )
1790	IF ( .NOT. humidity ) THEN
1791	message_string = 'data_output_pr = ' // &
1792	TRIM( data_output_pr(i) ) // ' is not imp' // &
1793	'lemented for humidity = .FALSE.'
1794	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1795	ELSE
1796	dopr_index(i) = 41
1797	dopr_unit(i) = 'kg/kg'
1798	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1799	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1800	dopr_initial_index(i) = 26
1801	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1802	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1803	data_output_pr(i) = data_output_pr(i)(2:)
1804	ENDIF
1805	ENDIF
1806
1807	CASE ( 's', '#s' )
1808	IF ( .NOT. passive_scalar ) THEN
1809	message_string = 'data_output_pr = ' // &
1810	TRIM( data_output_pr(i) ) // ' is not imp' // &
1811	'lemented for passive_scalar = .FALSE.'
1812	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1813	ELSE
1814	dopr_index(i) = 41
1815	dopr_unit(i) = 'kg/m3'
1816	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1817	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1818	dopr_initial_index(i) = 26
1819	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1820	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1821	data_output_pr(i) = data_output_pr(i)(2:)
1822	ENDIF
1823	ENDIF
1824
1825	CASE ( 'qv', '#qv' )
1826	IF ( .NOT. cloud_physics ) THEN
1827	dopr_index(i) = 41
1828	dopr_unit(i) = 'kg/kg'
1829	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1830	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1831	dopr_initial_index(i) = 26
1832	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1833	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1834	data_output_pr(i) = data_output_pr(i)(2:)
1835	ENDIF
1836	ELSE
1837	dopr_index(i) = 42
1838	dopr_unit(i) = 'kg/kg'
1839	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1840	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1841	dopr_initial_index(i) = 27
1842	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1843	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1844	data_output_pr(i) = data_output_pr(i)(2:)
1845	ENDIF
1846	ENDIF
1847
1848	CASE ( 'lpt', '#lpt' )
1849	IF ( .NOT. cloud_physics ) THEN
1850	message_string = 'data_output_pr = ' // &
1851	TRIM( data_output_pr(i) ) // ' is not imp' // &
1852	'lemented for cloud_physics = .FALSE.'
1853	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1854	ELSE
1855	dopr_index(i) = 4
1856	dopr_unit(i) = 'K'
1857	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1858	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1859	dopr_initial_index(i) = 7
1860	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1861	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1862	data_output_pr(i) = data_output_pr(i)(2:)
1863	ENDIF
1864	ENDIF
1865
1866	CASE ( 'vpt', '#vpt' )
1867	dopr_index(i) = 44
1868	dopr_unit(i) = 'K'
1869	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1870	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1871	dopr_initial_index(i) = 29
1872	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1873	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1874	data_output_pr(i) = data_output_pr(i)(2:)
1875	ENDIF
1876
1877	CASE ( 'w"vpt"' )
1878	dopr_index(i) = 45
1879	dopr_unit(i) = 'K m/s'
1880	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1881
1882	CASE ( 'wvpt' )
1883	dopr_index(i) = 46
1884	dopr_unit(i) = 'K m/s'
1885	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1886
1887	CASE ( 'wvpt' )
1888	dopr_index(i) = 47
1889	dopr_unit(i) = 'K m/s'
1890	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1891
1892	CASE ( 'w"q"' )
1893	IF ( .NOT. humidity ) THEN
1894	message_string = 'data_output_pr = ' // &
1895	TRIM( data_output_pr(i) ) // ' is not imp' // &
1896	'lemented for humidity = .FALSE.'
1897	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1898	ELSE
1899	dopr_index(i) = 48
1900	dopr_unit(i) = 'kg/kg m/s'
1901	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1902	ENDIF
1903
1904	CASE ( 'wq' )
1905	IF ( .NOT. humidity ) THEN
1906	message_string = 'data_output_pr = ' // &
1907	TRIM( data_output_pr(i) ) // ' is not imp' // &
1908	'lemented for humidity = .FALSE.'
1909	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1910	ELSE
1911	dopr_index(i) = 49
1912	dopr_unit(i) = 'kg/kg m/s'
1913	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1914	ENDIF
1915
1916	CASE ( 'wq' )
1917	IF ( .NOT. humidity ) THEN
1918	message_string = 'data_output_pr = ' // &
1919	TRIM( data_output_pr(i) ) // ' is not imp' // &
1920	'lemented for humidity = .FALSE.'
1921	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1922	ELSE
1923	dopr_index(i) = 50
1924	dopr_unit(i) = 'kg/kg m/s'
1925	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1926	ENDIF
1927
1928	CASE ( 'w"s"' )
1929	IF ( .NOT. passive_scalar ) THEN
1930	message_string = 'data_output_pr = ' // &
1931	TRIM( data_output_pr(i) ) // ' is not imp' // &
1932	'lemented for passive_scalar = .FALSE.'
1933	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1934	ELSE
1935	dopr_index(i) = 48
1936	dopr_unit(i) = 'kg/m3 m/s'
1937	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1938	ENDIF
1939
1940	CASE ( 'ws' )
1941	IF ( .NOT. passive_scalar ) THEN
1942	message_string = 'data_output_pr = ' // &
1943	TRIM( data_output_pr(i) ) // ' is not imp' // &
1944	'lemented for passive_scalar = .FALSE.'
1945	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1946	ELSE
1947	dopr_index(i) = 49
1948	dopr_unit(i) = 'kg/m3 m/s'
1949	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1950	ENDIF
1951
1952	CASE ( 'ws' )
1953	IF ( .NOT. passive_scalar ) THEN
1954	message_string = 'data_output_pr = ' // &
1955	TRIM( data_output_pr(i) ) // ' is not imp' // &
1956	'lemented for passive_scalar = .FALSE.'
1957	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1958	ELSE
1959	dopr_index(i) = 50
1960	dopr_unit(i) = 'kg/m3 m/s'
1961	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1962	ENDIF
1963
1964	CASE ( 'w"qv"' )
1965	IF ( humidity .AND. .NOT. cloud_physics ) &
1966	THEN
1967	dopr_index(i) = 48
1968	dopr_unit(i) = 'kg/kg m/s'
1969	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1970	ELSEIF( humidity .AND. cloud_physics ) THEN
1971	dopr_index(i) = 51
1972	dopr_unit(i) = 'kg/kg m/s'
1973	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1974	ELSE
1975	message_string = 'data_output_pr = ' // &
1976	TRIM( data_output_pr(i) ) // ' is not imp' // &
1977	'lemented for cloud_physics = .FALSE. an&' // &
1978	'd humidity = .FALSE.'
1979	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1980	ENDIF
1981
1982	CASE ( 'wqv' )
1983	IF ( humidity .AND. .NOT. cloud_physics ) &
1984	THEN
1985	dopr_index(i) = 49
1986	dopr_unit(i) = 'kg/kg m/s'
1987	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1988	ELSEIF( humidity .AND. cloud_physics ) THEN
1989	dopr_index(i) = 52
1990	dopr_unit(i) = 'kg/kg m/s'
1991	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1992	ELSE
1993	message_string = 'data_output_pr = ' // &
1994	TRIM( data_output_pr(i) ) // ' is not imp' // &
1995	'lemented for cloud_physics = .FALSE. an&' // &
1996	'd humidity = .FALSE.'
1997	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1998	ENDIF
1999
2000	CASE ( 'wqv' )
2001	IF ( humidity .AND. .NOT. cloud_physics ) &
2002	THEN
2003	dopr_index(i) = 50
2004	dopr_unit(i) = 'kg/kg m/s'
2005	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2006	ELSEIF( humidity .AND. cloud_physics ) THEN
2007	dopr_index(i) = 53
2008	dopr_unit(i) = 'kg/kg m/s'
2009	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2010	ELSE
2011	message_string = 'data_output_pr = ' // &
2012	TRIM( data_output_pr(i) ) // ' is not imp' // &
2013	'lemented for cloud_physics = .FALSE. an&' // &
2014	'd humidity = .FALSE.'
2015	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2016	ENDIF
2017
2018	CASE ( 'ql' )
2019	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2020	message_string = 'data_output_pr = ' // &
2021	TRIM( data_output_pr(i) ) // ' is not imp' // &
2022	'lemented for cloud_physics = .FALSE. or' // &
2023	'&cloud_droplets = .FALSE.'
2024	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2025	ELSE
2026	dopr_index(i) = 54
2027	dopr_unit(i) = 'kg/kg'
2028	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2029	ENDIF
2030
2031	CASE ( 'wuu*/dz' )
2032	dopr_index(i) = 55
2033	dopr_unit(i) = 'm2/s3'
2034	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2035
2036	CASE ( 'wp/dz' )
2037	dopr_index(i) = 56
2038	dopr_unit(i) = 'm2/s3'
2039	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2040
2041	CASE ( 'w"e/dz' )
2042	dopr_index(i) = 57
2043	dopr_unit(i) = 'm2/s3'
2044	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2045
2046	CASE ( 'u"pt"' )
2047	dopr_index(i) = 58
2048	dopr_unit(i) = 'K m/s'
2049	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2050
2051	CASE ( 'upt' )
2052	dopr_index(i) = 59
2053	dopr_unit(i) = 'K m/s'
2054	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2055
2056	CASE ( 'upt_t' )
2057	dopr_index(i) = 60
2058	dopr_unit(i) = 'K m/s'
2059	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2060
2061	CASE ( 'v"pt"' )
2062	dopr_index(i) = 61
2063	dopr_unit(i) = 'K m/s'
2064	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2065
2066	CASE ( 'vpt' )
2067	dopr_index(i) = 62
2068	dopr_unit(i) = 'K m/s'
2069	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2070
2071	CASE ( 'vpt_t' )
2072	dopr_index(i) = 63
2073	dopr_unit(i) = 'K m/s'
2074	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2075
2076	CASE ( 'rho' )
2077	dopr_index(i) = 64
2078	dopr_unit(i) = 'kg/m3'
2079	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2080
2081	CASE ( 'w"sa"' )
2082	IF ( .NOT. ocean ) THEN
2083	message_string = 'data_output_pr = ' // &
2084	TRIM( data_output_pr(i) ) // ' is not imp' // &
2085	'lemented for ocean = .FALSE.'
2086	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2087	ELSE
2088	dopr_index(i) = 65
2089	dopr_unit(i) = 'psu m/s'
2090	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2091	ENDIF
2092
2093	CASE ( 'wsa' )
2094	IF ( .NOT. ocean ) THEN
2095	message_string = 'data_output_pr = ' // &
2096	TRIM( data_output_pr(i) ) // ' is not imp' // &
2097	'lemented for ocean = .FALSE.'
2098	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2099	ELSE
2100	dopr_index(i) = 66
2101	dopr_unit(i) = 'psu m/s'
2102	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2103	ENDIF
2104
2105	CASE ( 'wsa' )
2106	IF ( .NOT. ocean ) THEN
2107	message_string = 'data_output_pr = ' // &
2108	TRIM( data_output_pr(i) ) // ' is not imp' // &
2109	'lemented for ocean = .FALSE.'
2110	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2111	ELSE
2112	dopr_index(i) = 67
2113	dopr_unit(i) = 'psu m/s'
2114	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2115	ENDIF
2116
2117	CASE ( 'wp' )
2118	dopr_index(i) = 68
2119	dopr_unit(i) = 'm3/s3'
2120	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2121
2122	CASE ( 'w"e' )
2123	dopr_index(i) = 69
2124	dopr_unit(i) = 'm3/s3'
2125	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2126
2127	CASE ( 'q*2' )
2128	IF ( .NOT. humidity ) THEN
2129	message_string = 'data_output_pr = ' // &
2130	TRIM( data_output_pr(i) ) // ' is not imp' // &
2131	'lemented for humidity = .FALSE.'
2132	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2133	ELSE
2134	dopr_index(i) = 70
2135	dopr_unit(i) = 'kg2/kg2'
2136	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2137	ENDIF
2138
2139	CASE DEFAULT
2140
2141	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2142
2143	IF ( unit == 'illegal' ) THEN
2144	IF ( data_output_pr_user(1) /= ' ' ) THEN
2145	message_string = 'illegal value for data_output_pr or ' // &
2146	'data_output_pr_user = "' // &
2147	TRIM( data_output_pr(i) ) // '"'
2148	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2149	ELSE
2150	message_string = 'illegal value for data_output_pr = "' // &
2151	TRIM( data_output_pr(i) ) // '"'
2152	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2153	ENDIF
2154	ENDIF
2155
2156	END SELECT
2157	!
2158	!-- Check to which of the predefined coordinate systems the profile belongs
2159	DO k = 1, crmax
2160	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2161	/=0 ) &
2162	THEN
2163	dopr_crossindex(i) = k
2164	EXIT
2165	ENDIF
2166	ENDDO
2167	!
2168	!-- Generate the text for the labels of the PROFIL output file. "-characters
2169	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2170	!-- control characters
2171	dopr_label(i) = data_output_pr(i)
2172	position = INDEX( dopr_label(i) , '"' )
2173	DO WHILE ( position /= 0 )
2174	dopr_label(i)(position:position) = ''''
2175	position = INDEX( dopr_label(i) , '"' )
2176	ENDDO
2177
2178	ENDDO
2179
2180	!
2181	!-- y-value range of the coordinate system (PROFIL).
2182	!-- x-value range determined in plot_1d.
2183	IF ( .NOT. ocean ) THEN
2184	cross_uymin = 0.0
2185	IF ( z_max_do1d == -1.0 ) THEN
2186	cross_uymax = zu(nzt+1)
2187	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2188	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2189	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2190	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2191	ELSE
2192	cross_uymax = z_max_do1d
2193	ENDIF
2194	ENDIF
2195
2196	!
2197	!-- Check whether the chosen normalizing factor for the coordinate systems is
2198	!-- permissible
2199	DO i = 1, crmax
2200	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2201
2202	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2203	j = 0
2204
2205	CASE DEFAULT
2206	message_string = 'unknown normalization method cross_normali' // &
2207	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2208	'"'
2209	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2210
2211	END SELECT
2212	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2213
2214	CASE ( '', 'z_i' )
2215	j = 0
2216
2217	CASE DEFAULT
2218	message_string = 'unknown normalization method cross_normali' // &
2219	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2220	'"'
2221	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2222
2223	END SELECT
2224	ENDDO
2225	!
2226	!-- Check normalized y-value range of the coordinate system (PROFIL)
2227	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2228	THEN
2229	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2230	z_max_do1d_normalized, ' must be >= 0.0'
2231	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2232	ENDIF
2233
2234
2235	!
2236	!-- Append user-defined data output variables to the standard data output
2237	IF ( data_output_user(1) /= ' ' ) THEN
2238	i = 1
2239	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2240	i = i + 1
2241	ENDDO
2242	j = 1
2243	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2244	IF ( i > 100 ) THEN
2245	message_string = 'number of output quantitities given by data' // &
2246	'_output and data_output_user exceeds the limit of 100'
2247	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2248	ENDIF
2249	data_output(i) = data_output_user(j)
2250	i = i + 1
2251	j = j + 1
2252	ENDDO
2253	ENDIF
2254
2255	!
2256	!-- Check and set steering parameters for 2d/3d data output and averaging
2257	i = 1
2258	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2259	!
2260	!-- Check for data averaging
2261	ilen = LEN_TRIM( data_output(i) )
2262	j = 0 ! no data averaging
2263	IF ( ilen > 3 ) THEN
2264	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2265	j = 1 ! data averaging
2266	data_output(i) = data_output(i)(1:ilen-3)
2267	ENDIF
2268	ENDIF
2269	!
2270	!-- Check for cross section or volume data
2271	ilen = LEN_TRIM( data_output(i) )
2272	k = 0 ! 3d data
2273	var = data_output(i)(1:ilen)
2274	IF ( ilen > 3 ) THEN
2275	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2276	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2277	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2278	k = 1 ! 2d data
2279	var = data_output(i)(1:ilen-3)
2280	ENDIF
2281	ENDIF
2282	!
2283	!-- Check for allowed value and set units
2284	SELECT CASE ( TRIM( var ) )
2285
2286	CASE ( 'e' )
2287	IF ( constant_diffusion ) THEN
2288	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2289	'res constant_diffusion = .FALSE.'
2290	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2291	ENDIF
2292	unit = 'm2/s2'
2293
2294	CASE ( 'pc', 'pr' )
2295	IF ( .NOT. particle_advection ) THEN
2296	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2297	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2298	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2299	ENDIF
2300	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2301	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2302
2303	CASE ( 'q', 'vpt' )
2304	IF ( .NOT. humidity ) THEN
2305	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2306	'res humidity = .TRUE.'
2307	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2308	ENDIF
2309	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2310	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2311
2312	CASE ( 'ql' )
2313	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2314	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2315	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2316	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2317	ENDIF
2318	unit = 'kg/kg'
2319
2320	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2321	IF ( .NOT. cloud_droplets ) THEN
2322	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2323	'res cloud_droplets = .TRUE.'
2324	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2325	ENDIF
2326	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2327	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2328	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2329
2330	CASE ( 'qv' )
2331	IF ( .NOT. cloud_physics ) THEN
2332	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2333	'res cloud_physics = .TRUE.'
2334	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2335	ENDIF
2336	unit = 'kg/kg'
2337
2338	CASE ( 'rho' )
2339	IF ( .NOT. ocean ) THEN
2340	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2341	'res ocean = .TRUE.'
2342	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2343	ENDIF
2344	unit = 'kg/m3'
2345
2346	CASE ( 's' )
2347	IF ( .NOT. passive_scalar ) THEN
2348	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2349	'res passive_scalar = .TRUE.'
2350	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2351	ENDIF
2352	unit = 'conc'
2353
2354	CASE ( 'sa' )
2355	IF ( .NOT. ocean ) THEN
2356	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2357	'res ocean = .TRUE.'
2358	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2359	ENDIF
2360	unit = 'psu'
2361
2362	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2363	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2364	message_string = 'illegal value for data_output: "' // &
2365	TRIM( var ) // '" & only 2d-horizontal ' // &
2366	'cross sections are allowed for this value'
2367	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2368	ENDIF
2369	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2370	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2371	'res cloud_physics = .TRUE.'
2372	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2373	ENDIF
2374	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2375	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2376	'res precipitation = .TRUE.'
2377	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2378	ENDIF
2379	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2380	message_string = 'temporal averaging of precipitation ' // &
2381	'amount "' // TRIM( var ) // '" is not possible'
2382	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2383	ENDIF
2384	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2385	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2386	'res precipitation = .TRUE.'
2387	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2388	ENDIF
2389
2390
2391	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2392	IF ( TRIM( var ) == 't*' ) unit = 'K'
2393	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2394	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2395	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2396	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2397
2398	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2399	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2400	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2401	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2402	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2403	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2404	CONTINUE
2405
2406	CASE DEFAULT
2407	CALL user_check_data_output( var, unit )
2408
2409	IF ( unit == 'illegal' ) THEN
2410	IF ( data_output_user(1) /= ' ' ) THEN
2411	message_string = 'illegal value for data_output or ' // &
2412	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2413	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2414	ELSE
2415	message_string = 'illegal value for data_output =' // &
2416	TRIM( data_output(i) ) // '"'
2417	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2418	ENDIF
2419	ENDIF
2420
2421	END SELECT
2422	!
2423	!-- Set the internal steering parameters appropriately
2424	IF ( k == 0 ) THEN
2425	do3d_no(j) = do3d_no(j) + 1
2426	do3d(j,do3d_no(j)) = data_output(i)
2427	do3d_unit(j,do3d_no(j)) = unit
2428	ELSE
2429	do2d_no(j) = do2d_no(j) + 1
2430	do2d(j,do2d_no(j)) = data_output(i)
2431	do2d_unit(j,do2d_no(j)) = unit
2432	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2433	data_output_xy(j) = .TRUE.
2434	ENDIF
2435	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2436	data_output_xz(j) = .TRUE.
2437	ENDIF
2438	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2439	data_output_yz(j) = .TRUE.
2440	ENDIF
2441	ENDIF
2442
2443	IF ( j == 1 ) THEN
2444	!
2445	!-- Check, if variable is already subject to averaging
2446	found = .FALSE.
2447	DO k = 1, doav_n
2448	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2449	ENDDO
2450
2451	IF ( .NOT. found ) THEN
2452	doav_n = doav_n + 1
2453	doav(doav_n) = var
2454	ENDIF
2455	ENDIF
2456
2457	i = i + 1
2458	ENDDO
2459
2460	!
2461	!-- Store sectional planes in one shared array
2462	section(:,1) = section_xy
2463	section(:,2) = section_xz
2464	section(:,3) = section_yz
2465
2466	!
2467	!-- Upper plot limit (grid point value) for 1D profiles
2468	IF ( z_max_do1d == -1.0 ) THEN
2469	nz_do1d = nzt+1
2470	ELSE
2471	DO k = nzb+1, nzt+1
2472	nz_do1d = k
2473	IF ( zw(k) > z_max_do1d ) EXIT
2474	ENDDO
2475	ENDIF
2476
2477	!
2478	!-- Upper plot limit for 2D vertical sections
2479	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2480	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2481	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2482	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2483	' (zu(nzt))'
2484	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2485	ENDIF
2486
2487	!
2488	!-- Upper plot limit for 3D arrays
2489	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2490
2491	!
2492	!-- Determine and check accuracy for compressed 3D plot output
2493	IF ( do3d_compress ) THEN
2494	!
2495	!-- Compression only permissible on T3E machines
2496	IF ( host(1:3) /= 't3e' ) THEN
2497	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2498	TRIM( host ) // '"'
2499	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2500	ENDIF
2501
2502	i = 1
2503	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2504
2505	ilen = LEN_TRIM( do3d_comp_prec(i) )
2506	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2507	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2508	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2509	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2510	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2511	ENDIF
2512
2513	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2514	var = do3d_comp_prec(i)(1:ilen-1)
2515
2516	SELECT CASE ( var )
2517
2518	CASE ( 'u' )
2519	j = 1
2520	CASE ( 'v' )
2521	j = 2
2522	CASE ( 'w' )
2523	j = 3
2524	CASE ( 'p' )
2525	j = 4
2526	CASE ( 'pt' )
2527	j = 5
2528
2529	CASE DEFAULT
2530	WRITE( message_string, * ) 'unknown variable "', &
2531	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2532	i, ')'
2533	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2534
2535	END SELECT
2536
2537	plot_3d_precision(j)%precision = prec
2538	i = i + 1
2539
2540	ENDDO
2541	ENDIF
2542
2543	!
2544	!-- Check the data output format(s)
2545	IF ( data_output_format(1) == ' ' ) THEN
2546	!
2547	!-- Default value
2548	netcdf_output = .TRUE.
2549	ELSE
2550	i = 1
2551	DO WHILE ( data_output_format(i) /= ' ' )
2552
2553	SELECT CASE ( data_output_format(i) )
2554
2555	CASE ( 'netcdf' )
2556	netcdf_output = .TRUE.
2557	CASE ( 'iso2d' )
2558	iso2d_output = .TRUE.
2559	CASE ( 'profil' )
2560	profil_output = .TRUE.
2561	CASE ( 'avs' )
2562	avs_output = .TRUE.
2563
2564	CASE DEFAULT
2565	message_string = 'unknown value for data_output_format "' // &
2566	TRIM( data_output_format(i) ) // '"'
2567	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2568
2569	END SELECT
2570
2571	i = i + 1
2572	IF ( i > 10 ) EXIT
2573
2574	ENDDO
2575
2576	ENDIF
2577
2578	!
2579	!-- Check netcdf precison
2580	ldum = .FALSE.
2581	CALL define_netcdf_header( 'ch', ldum, 0 )
2582
2583	!
2584	!-- Check, whether a constant diffusion coefficient shall be used
2585	IF ( km_constant /= -1.0 ) THEN
2586	IF ( km_constant < 0.0 ) THEN
2587	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2588	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2589	ELSE
2590	IF ( prandtl_number < 0.0 ) THEN
2591	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2592	' < 0.0'
2593	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2594	ENDIF
2595	constant_diffusion = .TRUE.
2596
2597	IF ( prandtl_layer ) THEN
2598	message_string = 'prandtl_layer is not allowed with fixed ' // &
2599	'value of km'
2600	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2601	ENDIF
2602	ENDIF
2603	ENDIF
2604
2605	!
2606	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2607	!-- for the horizontal diffusivity used within the outflow damping layer,
2608	!-- and check/set the width of the damping layer
2609	IF ( bc_lr /= 'cyclic' ) THEN
2610	IF ( km_damp_max == -1.0 ) THEN
2611	km_damp_max = 0.5 * dx
2612	ENDIF
2613	IF ( outflow_damping_width == -1.0 ) THEN
2614	outflow_damping_width = MIN( 20, nx/2 )
2615	ENDIF
2616	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2617	message_string = 'outflow_damping width out of range'
2618	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2619	ENDIF
2620	ENDIF
2621
2622	IF ( bc_ns /= 'cyclic' ) THEN
2623	IF ( km_damp_max == -1.0 ) THEN
2624	km_damp_max = 0.5 * dy
2625	ENDIF
2626	IF ( outflow_damping_width == -1.0 ) THEN
2627	outflow_damping_width = MIN( 20, ny/2 )
2628	ENDIF
2629	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2630	message_string = 'outflow_damping width out of range'
2631	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2632	ENDIF
2633	ENDIF
2634
2635	!
2636	!-- Check value range for rif
2637	IF ( rif_min >= rif_max ) THEN
2638	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2639	'than rif_max = ', rif_max
2640	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2641	ENDIF
2642
2643	!
2644	!-- Determine upper and lower hight level indices for random perturbations
2645	IF ( disturbance_level_b == -9999999.9 ) THEN
2646	IF ( ocean ) THEN
2647	disturbance_level_b = zu((nzt*2)/3)
2648	disturbance_level_ind_b = ( nzt * 2 ) / 3
2649	ELSE
2650	disturbance_level_b = zu(nzb+3)
2651	disturbance_level_ind_b = nzb + 3
2652	ENDIF
2653	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2654	WRITE( message_string, * ) 'disturbance_level_b = ', &
2655	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2656	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2657	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2658	WRITE( message_string, * ) 'disturbance_level_b = ', &
2659	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2660	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2661	ELSE
2662	DO k = 3, nzt-2
2663	IF ( disturbance_level_b <= zu(k) ) THEN
2664	disturbance_level_ind_b = k
2665	EXIT
2666	ENDIF
2667	ENDDO
2668	ENDIF
2669
2670	IF ( disturbance_level_t == -9999999.9 ) THEN
2671	IF ( ocean ) THEN
2672	disturbance_level_t = zu(nzt-3)
2673	disturbance_level_ind_t = nzt - 3
2674	ELSE
2675	disturbance_level_t = zu(nzt/3)
2676	disturbance_level_ind_t = nzt / 3
2677	ENDIF
2678	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2679	WRITE( message_string, * ) 'disturbance_level_t = ', &
2680	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2681	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2682	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2683	WRITE( message_string, * ) 'disturbance_level_t = ', &
2684	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2685	disturbance_level_b
2686	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2687	ELSE
2688	DO k = 3, nzt-2
2689	IF ( disturbance_level_t <= zu(k) ) THEN
2690	disturbance_level_ind_t = k
2691	EXIT
2692	ENDIF
2693	ENDDO
2694	ENDIF
2695
2696	!
2697	!-- Check again whether the levels determined this way are ok.
2698	!-- Error may occur at automatic determination and too few grid points in
2699	!-- z-direction.
2700	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2701	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2702	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2703	disturbance_level_b
2704	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2705	ENDIF
2706
2707	!
2708	!-- Determine the horizontal index range for random perturbations.
2709	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2710	!-- near the inflow and the perturbation area is further limited to ...(1)
2711	!-- after the initial phase of the flow.
2712	dist_nxl = 0; dist_nxr = nx
2713	dist_nys = 0; dist_nyn = ny
2714	IF ( bc_lr /= 'cyclic' ) THEN
2715	IF ( inflow_disturbance_begin == -1 ) THEN
2716	inflow_disturbance_begin = MIN( 10, nx/2 )
2717	ENDIF
2718	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2719	THEN
2720	message_string = 'inflow_disturbance_begin out of range'
2721	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2722	ENDIF
2723	IF ( inflow_disturbance_end == -1 ) THEN
2724	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2725	ENDIF
2726	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2727	THEN
2728	message_string = 'inflow_disturbance_end out of range'
2729	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2730	ENDIF
2731	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2732	IF ( inflow_disturbance_begin == -1 ) THEN
2733	inflow_disturbance_begin = MIN( 10, ny/2 )
2734	ENDIF
2735	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2736	THEN
2737	message_string = 'inflow_disturbance_begin out of range'
2738	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2739	ENDIF
2740	IF ( inflow_disturbance_end == -1 ) THEN
2741	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2742	ENDIF
2743	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2744	THEN
2745	message_string = 'inflow_disturbance_end out of range'
2746	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2747	ENDIF
2748	ENDIF
2749
2750	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2751	dist_nxr = nx - inflow_disturbance_begin
2752	dist_nxl(1) = nx - inflow_disturbance_end
2753	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2754	dist_nxl = inflow_disturbance_begin
2755	dist_nxr(1) = inflow_disturbance_end
2756	ENDIF
2757	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2758	dist_nyn = ny - inflow_disturbance_begin
2759	dist_nys(1) = ny - inflow_disturbance_end
2760	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2761	dist_nys = inflow_disturbance_begin
2762	dist_nyn(1) = inflow_disturbance_end
2763	ENDIF
2764
2765	!
2766	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2767	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2768	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2769	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2770	'condition at the inflow boundary'
2771	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2772	ENDIF
2773
2774	!
2775	!-- In case of turbulent inflow calculate the index of the recycling plane
2776	IF ( turbulent_inflow ) THEN
2777	IF ( recycling_width == 9999999.9 ) THEN
2778	!
2779	!-- Set the default value for the width of the recycling domain
2780	recycling_width = 0.1 * nx * dx
2781	ELSE
2782	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2783	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2784	' ', recycling_width
2785	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2786	ENDIF
2787	ENDIF
2788	!
2789	!-- Calculate the index
2790	recycling_plane = recycling_width / dx
2791	ENDIF
2792
2793	!
2794	!-- Check random generator
2795	IF ( random_generator /= 'system-specific' .AND. &
2796	random_generator /= 'numerical-recipes' ) THEN
2797	message_string = 'unknown random generator: random_generator = "' // &
2798	TRIM( random_generator ) // '"'
2799	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2800	ENDIF
2801
2802	!
2803	!-- Determine damping level index for 1D model
2804	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2805	IF ( damp_level_1d == -1.0 ) THEN
2806	damp_level_1d = zu(nzt+1)
2807	damp_level_ind_1d = nzt + 1
2808	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2809	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2810	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2811	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2812	ELSE
2813	DO k = 1, nzt+1
2814	IF ( damp_level_1d <= zu(k) ) THEN
2815	damp_level_ind_1d = k
2816	EXIT
2817	ENDIF
2818	ENDDO
2819	ENDIF
2820	ENDIF
2821
2822	!
2823	!-- Check some other 1d-model parameters
2824	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2825	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2826	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2827	'" is unknown'
2828	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2829	ENDIF
2830	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2831	TRIM( dissipation_1d ) /= 'detering' ) THEN
2832	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2833	'" is unknown'
2834	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2835	ENDIF
2836
2837	!
2838	!-- Set time for the next user defined restart (time_restart is the
2839	!-- internal parameter for steering restart events)
2840	IF ( restart_time /= 9999999.9 ) THEN
2841	IF ( restart_time > time_since_reference_point ) THEN
2842	time_restart = restart_time
2843	ENDIF
2844	ELSE
2845	!
2846	!-- In case of a restart run, set internal parameter to default (no restart)
2847	!-- if the NAMELIST-parameter restart_time is omitted
2848	time_restart = 9999999.9
2849	ENDIF
2850
2851	!
2852	!-- Set default value of the time needed to terminate a model run
2853	IF ( termination_time_needed == -1.0 ) THEN
2854	IF ( host(1:3) == 'ibm' ) THEN
2855	termination_time_needed = 300.0
2856	ELSE
2857	termination_time_needed = 35.0
2858	ENDIF
2859	ENDIF
2860
2861	!
2862	!-- Check the time needed to terminate a model run
2863	IF ( host(1:3) == 't3e' ) THEN
2864	!
2865	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2866	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2867	IF ( termination_time_needed <= 30.0 ) THEN
2868	WRITE( message_string, * ) 'termination_time_needed = ', &
2869	termination_time_needed, ' must be > 30.0 on host "', &
2870	TRIM( host ), '"'
2871	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
2872	ENDIF
2873	ELSEIF ( host(1:3) == 'ibm' ) THEN
2874	!
2875	!-- On IBM-regatta machines the time should be at least 300 seconds,
2876	!-- because the job time consumed before executing palm (for compiling,
2877	!-- copying of files, etc.) has to be regarded
2878	IF ( termination_time_needed < 300.0 ) THEN
2879	WRITE( message_string, * ) 'termination_time_needed = ', &
2880	termination_time_needed, ' should be >= 300.0 on host "', &
2881	TRIM( host ), '"'
2882	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
2883	ENDIF
2884	ENDIF
2885
2886	!
2887	!-- Check pressure gradient conditions
2888	IF ( dp_external .AND. conserve_volume_flow ) THEN
2889	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
2890	' are .TRUE. but one of them must be .FALSE.'
2891	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
2892	ENDIF
2893	IF ( dp_external ) THEN
2894	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
2895	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
2896	' of range'
2897	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
2898	ENDIF
2899	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
2900	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
2901	', i.e. the external pressure gradient & will not be applied'
2902	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
2903	ENDIF
2904	ENDIF
2905	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
2906	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
2907	'.FALSE., i.e. the external pressure gradient & will not be applied'
2908	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
2909	ENDIF
2910	IF ( conserve_volume_flow ) THEN
2911	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
2912	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
2913	conserve_volume_flow_mode = 'inflow_profile'
2914	ELSE
2915	conserve_volume_flow_mode = 'initial_profiles'
2916	ENDIF
2917	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
2918	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
2919	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
2920	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
2921	conserve_volume_flow_mode
2922	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
2923	ENDIF
2924	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
2925	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
2926	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
2927	'require & conserve_volume_flow_mode = ''inflow_profile'''
2928	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
2929	ENDIF
2930	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
2931	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
2932	WRITE( message_string, * ) 'cyclic boundary conditions ', &
2933	'require & conserve_volume_flow_mode = ''initial_profiles''', &
2934	' or ''bulk_velocity'''
2935	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
2936	ENDIF
2937	ENDIF
2938	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
2939	( .NOT. conserve_volume_flow .OR. &
2940	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
2941	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
2942	'conserve_volume_flow = .T. and & ', &
2943	'conserve_volume_flow_mode = ''bulk_velocity'''
2944	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
2945	ENDIF
2946
2947	!
2948	!-- Check particle attributes
2949	IF ( particle_color /= 'none' ) THEN
2950	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
2951	particle_color /= 'z' ) THEN
2952	message_string = 'illegal value for parameter particle_color: ' // &
2953	TRIM( particle_color)
2954	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
2955	ELSE
2956	IF ( color_interval(2) <= color_interval(1) ) THEN
2957	message_string = 'color_interval(2) <= color_interval(1)'
2958	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
2959	ENDIF
2960	ENDIF
2961	ENDIF
2962
2963	IF ( particle_dvrpsize /= 'none' ) THEN
2964	IF ( particle_dvrpsize /= 'absw' ) THEN
2965	message_string = 'illegal value for parameter particle_dvrpsize:' // &
2966	' ' // TRIM( particle_color)
2967	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
2968	ELSE
2969	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
2970	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
2971	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
2972	ENDIF
2973	ENDIF
2974	ENDIF
2975
2976	!
2977	!-- Check &userpar parameters
2978	CALL user_check_parameters
2979
2980
2981	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |