Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 21

Last change on this file since 21 was 20, checked in by raasch, 18 years ago
new parameter use_top_fluxes, Bugfix: ddzw dimensioned 1:nzt+1
Property svn:keywords set to `Id`
File size: 84.5 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Temperature and humidity gradients at top are now calculated for nzt+1,
7	! top_heatflux and respective boundary condition bc_pt_t is checked
8	!
9	! Former revisions:
10	! -----------------
11	! $Id: check_parameters.f90 20 2007-02-26 00:12:32Z raasch $
12	! RCS Log replace by Id keyword, revision history cleaned up
13	!
14	! Revision 1.61 2006/08/04 14:20:25 raasch
15	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
16	! use_upstream_for_tke, default value for dt_dopts,
17	! generation of file header moved from routines palm and header to here
18	!
19	! Revision 1.1 1997/08/26 06:29:23 raasch
20	! Initial revision
21	!
22	!
23	! Description:
24	! ------------
25	! Check control parameters and deduce further quantities.
26	!------------------------------------------------------------------------------!
27
28	USE arrays_3d
29	USE constants
30	USE control_parameters
31	USE grid_variables
32	USE indices
33	USE model_1d
34	USE netcdf_control
35	USE particle_attributes
36	USE pegrid
37	USE profil_parameter
38	USE statistics
39	USE transpose_indices
40
41	IMPLICIT NONE
42
43	CHARACTER (LEN=1) :: sq
44	CHARACTER (LEN=6) :: var
45	CHARACTER (LEN=7) :: unit
46	CHARACTER (LEN=8) :: date
47	CHARACTER (LEN=10) :: time
48	CHARACTER (LEN=100) :: action
49
50	INTEGER :: i, ilen, intervals, iter, j, k, nnxh, nnyh, position, prec
51	LOGICAL :: found, ldum
52	REAL :: gradient, maxn, maxp
53
54
55	!
56	!-- Warning, if host is not set
57	IF ( host(1:1) == ' ' ) THEN
58	IF ( myid == 0 ) THEN
59	PRINT*, '+++ WARNING: check_parameters:'
60	PRINT*, ' "host" is not set. Please check that environment', &
61	' variable "localhost"'
62	PRINT*, ' is set before running PALM'
63	ENDIF
64	ENDIF
65
66	!
67	!-- Generate the file header which is used as a header for most of PALM's
68	!-- output files
69	CALL DATE_AND_TIME( date, time )
70	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
71	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
72
73	WRITE ( run_description_header, '(A,2X,A,A,A,I2.2,2X,A,A,2X,A,1X,A)' ) &
74	TRIM( version ),'run: ', TRIM( run_identifier ), '.', &
75	runnr, 'host: ', TRIM( host ), run_date, run_time
76
77	!
78	!-- Check topography setting (check for illegal parameter combinations)
79	IF ( topography /= 'flat' ) THEN
80	action = ' '
81	IF ( scalar_advec /= 'pw-scheme' ) THEN
82	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
83	ENDIF
84	IF ( momentum_advec /= 'pw-scheme' ) THEN
85	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
86	ENDIF
87	IF ( psolver == 'multigrid' .OR. psolver == 'sor' ) THEN
88	WRITE( action, '(A,A)' ) 'psolver = ', psolver
89	ENDIF
90	IF ( sloping_surface ) THEN
91	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
92	ENDIF
93	IF ( galilei_transformation ) THEN
94	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
95	ENDIF
96	IF ( cloud_physics ) THEN
97	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
98	ENDIF
99	IF ( cloud_droplets ) THEN
100	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
101	ENDIF
102	IF ( moisture ) THEN
103	WRITE( action, '(A)' ) 'moisture = .TRUE.'
104	ENDIF
105	IF ( .NOT. prandtl_layer ) THEN
106	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
107	ENDIF
108	IF ( action /= ' ' ) THEN
109	IF ( myid == 0 ) THEN
110	PRINT*, '+++ check_parameters:'
111	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
112	ENDIF
113	CALL local_stop
114	ENDIF
115	ENDIF
116	!
117	!-- Check whether there are any illegal values
118	!-- Pressure solver:
119	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
120	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
121	IF ( myid == 0 ) THEN
122	PRINT*, '+++ check_parameters:'
123	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
124	psolver
125	ENDIF
126	CALL local_stop
127	ENDIF
128
129	#if defined( __parallel )
130	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
131	IF ( myid == 0 ) THEN
132	PRINT*, '+++ check_parameters:'
133	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
134	'1d domain-decomposition along x'
135	PRINT*, ' please do not set npey/=1 in the parameter file'
136	ENDIF
137	CALL local_stop
138	ENDIF
139	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
140	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
141	IF ( myid == 0 ) THEN
142	PRINT*, '+++ check_parameters:'
143	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
144	'subdomains with unequal size'
145	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
146	' file'
147	ENDIF
148	CALL local_stop
149	ENDIF
150	#else
151	IF ( psolver == 'poisfft_hybrid' ) THEN
152	IF ( myid == 0 ) THEN
153	PRINT*, '+++ check_parameters:'
154	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
155	'parallel environment'
156	ENDIF
157	CALL local_stop
158	ENDIF
159	#endif
160
161	IF ( psolver == 'multigrid' ) THEN
162	IF ( cycle_mg == 'w' ) THEN
163	gamma_mg = 2
164	ELSEIF ( cycle_mg == 'v' ) THEN
165	gamma_mg = 1
166	ELSE
167	IF ( myid == 0 ) THEN
168	PRINT*, '+++ check_parameters:'
169	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
170	ENDIF
171	CALL local_stop
172	ENDIF
173	ENDIF
174
175	IF ( fft_method /= 'singleton-algorithm' .AND. &
176	fft_method /= 'temperton-algorithm' .AND. &
177	fft_method /= 'system-specific' ) THEN
178	IF ( myid == 0 ) THEN
179	PRINT*, '+++ check_parameters:'
180	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
181	ENDIF
182	CALL local_stop
183	ENDIF
184
185	!
186	!-- Advection schemes:
187	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
188	THEN
189	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
190	'scheme: momentum_advec=', momentum_advec
191	CALL local_stop
192	ENDIF
193	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
194	.AND. timestep_scheme /= 'euler' ) THEN
195	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
196	momentum_advec, ' is not allowed with ', &
197	'timestep_scheme=', timestep_scheme
198	CALL local_stop
199	ENDIF
200
201	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
202	scalar_advec /= 'ups-scheme' ) THEN
203	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
204	'scheme: scalar_advec=', scalar_advec
205	CALL local_stop
206	ENDIF
207
208	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
209	use_upstream_for_tke = .TRUE.
210	IF ( myid == 0 ) THEN
211	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
212	'.TRUE. because use_sgs_for_particles = .TRUE.'
213	ENDIF
214	ENDIF
215
216	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
217	IF ( myid == 0 ) THEN
218	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
219	'not allowed with timestep_scheme=', timestep_scheme
220	ENDIF
221	CALL local_stop
222	ENDIF
223
224	!
225	!-- Timestep schemes:
226	SELECT CASE ( TRIM( timestep_scheme ) )
227
228	CASE ( 'euler' )
229	intermediate_timestep_count_max = 1
230	asselin_filter_factor = 0.0
231
232	CASE ( 'leapfrog', 'leapfrog+euler' )
233	intermediate_timestep_count_max = 1
234
235	CASE ( 'runge-kutta-2' )
236	intermediate_timestep_count_max = 2
237	asselin_filter_factor = 0.0
238
239	CASE ( 'runge-kutta-3' )
240	intermediate_timestep_count_max = 3
241	asselin_filter_factor = 0.0
242
243	CASE DEFAULT
244	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
245	'scheme: timestep_scheme=', timestep_scheme
246	CALL local_stop
247
248	END SELECT
249
250	IF ( scalar_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
251	THEN
252	IF ( myid == 0 ) THEN
253	PRINT*, '+++ check_parameters: scalar advection scheme "', &
254	TRIM( scalar_advec ), '"'
255	PRINT*, ' does not work with timestep_scheme "', &
256	TRIM( timestep_scheme ), '"'
257	ENDIF
258	CALL local_stop
259	ENDIF
260
261	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
262	THEN
263	IF ( myid == 0 ) THEN
264	PRINT*, '+++ check_parameters: momentum advection scheme "', &
265	TRIM( momentum_advec ), '"'
266	PRINT*, ' does not work with timestep_scheme "', &
267	TRIM( timestep_scheme ), '"'
268	ENDIF
269	CALL local_stop
270	ENDIF
271
272
273	IF ( initializing_actions == ' ' ) THEN
274	IF ( myid == 0 ) THEN
275	PRINT*, '+++ check parameters:'
276	PRINT*, ' no value found for initializing_actions'
277	ENDIF
278	CALL local_stop
279	ENDIF
280
281	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
282	!
283	!-- No model continuation run; several initialising actions are possible
284	action = initializing_actions
285	DO WHILE ( TRIM( action ) /= '' )
286	position = INDEX( action, ' ' )
287	SELECT CASE ( action(1:position-1) )
288
289	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
290	'initialize_vortex', 'initialize_ptanom' )
291	action = action(position+1:)
292
293	CASE DEFAULT
294	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
295	'ng_action unkown or not allowed: action = "', &
296	TRIM(action), '"'
297	CALL local_stop
298
299	END SELECT
300	ENDDO
301	ENDIF
302	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
303	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
304	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
305	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
306	' allowed simultaneously'
307	CALL local_stop
308	ENDIF
309
310	IF ( cloud_physics .AND. .NOT. moisture ) THEN
311	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture =', &
312	moisture, ' is not allowed with ', &
313	'cloud_physics=', cloud_physics
314	CALL local_stop
315	ENDIF
316
317	IF ( moisture .AND. sloping_surface ) THEN
318	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture = TRUE', &
319	'and hang = TRUE are not', &
320	' allowed simultaneously'
321	CALL local_stop
322	ENDIF
323
324	IF ( moisture .AND. scalar_advec == 'ups-scheme' ) THEN
325	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
326	'is not implemented for moisture'
327	CALL local_stop
328	ENDIF
329
330	IF ( passive_scalar .AND. moisture ) THEN
331	IF ( myid == 0 ) PRINT*, '+++ check_parameters: moisture = TRUE and', &
332	'passive_scalar = TRUE is not allowed ', &
333	'simultaneously'
334	CALL local_stop
335	ENDIF
336
337	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
338	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
339	'is not implemented for passive_scalar'
340	CALL local_stop
341	ENDIF
342
343	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
344	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
345	TRIM( grid_matching ), &
346	'" found for parameter grid_matching'
347	CALL local_stop
348	ENDIF
349
350	!
351	!-- In case of no model continuation run, check initialising parameters and
352	!-- deduce further quantities
353	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
354
355	!
356	!-- Initial profiles for 1D and 3D model, respectively
357	u_init = ug_surface
358	v_init = vg_surface
359	pt_init = pt_surface
360	IF ( moisture ) q_init = q_surface
361	IF ( passive_scalar ) q_init = s_surface
362
363	!
364	!--
365	!-- If required, compute initial profile of the geostrophic wind
366	!-- (component ug)
367	i = 1
368	gradient = 0.0
369	ug_vertical_gradient_level_ind(1) = 0
370	ug(0) = ug_surface
371	DO k = 1, nzt+1
372	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
373	ug_vertical_gradient_level(i) >= 0.0 ) THEN
374	gradient = ug_vertical_gradient(i) / 100.0
375	ug_vertical_gradient_level_ind(i) = k - 1
376	i = i + 1
377	IF ( i > 10 ) THEN
378	IF ( myid == 0 ) THEN
379	PRINT*, '+++ check_parameters: upper bound 10 of array', &
380	' "ug_vertical_gradient_level_ind" exceeded'
381	ENDIF
382	CALL local_stop
383	ENDIF
384	ENDIF
385	IF ( gradient /= 0.0 ) THEN
386	IF ( k /= 1 ) THEN
387	ug(k) = ug(k-1) + dzu(k) * gradient
388	ELSE
389	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
390	ENDIF
391	ELSE
392	ug(k) = ug(k-1)
393	ENDIF
394	ENDDO
395
396	u_init = ug
397
398	!
399	!-- In case of no given gradients for ug, choose a vanishing gradient
400	IF ( ug_vertical_gradient_level(1) == -1.0 ) THEN
401	ug_vertical_gradient_level(1) = 0.0
402	ENDIF
403
404	!
405	!--
406	!-- If required, compute initial profile of the geostrophic wind
407	!-- (component vg)
408	i = 1
409	gradient = 0.0
410	vg_vertical_gradient_level_ind(1) = 0
411	vg(0) = vg_surface
412	DO k = 1, nzt+1
413	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
414	vg_vertical_gradient_level(i) >= 0.0 ) THEN
415	gradient = vg_vertical_gradient(i) / 100.0
416	vg_vertical_gradient_level_ind(i) = k - 1
417	i = i + 1
418	IF ( i > 10 ) THEN
419	IF ( myid == 0 ) THEN
420	PRINT*, '+++ check_parameters: upper bound 10 of array', &
421	' "vg_vertical_gradient_level_ind" exceeded'
422	ENDIF
423	CALL local_stop
424	ENDIF
425	ENDIF
426	IF ( gradient /= 0.0 ) THEN
427	IF ( k /= 1 ) THEN
428	vg(k) = vg(k-1) + dzu(k) * gradient
429	ELSE
430	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
431	ENDIF
432	ELSE
433	vg(k) = vg(k-1)
434	ENDIF
435	ENDDO
436
437	v_init = vg
438
439	!
440	!-- In case of no given gradients for vg, choose a vanishing gradient
441	IF ( vg_vertical_gradient_level(1) == -1.0 ) THEN
442	vg_vertical_gradient_level(1) = 0.0
443	ENDIF
444
445	!
446	!-- If required, compute initial temperature profile using the given
447	!-- temperature gradient
448	i = 1
449	gradient = 0.0
450	pt_vertical_gradient_level_ind(1) = 0
451	DO k = 1, nzt+1
452	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
453	pt_vertical_gradient_level(i) >= 0.0 ) THEN
454	gradient = pt_vertical_gradient(i) / 100.0
455	pt_vertical_gradient_level_ind(i) = k - 1
456	i = i + 1
457	IF ( i > 10 ) THEN
458	IF ( myid == 0 ) THEN
459	PRINT*, '+++ check_parameters: upper bound 10 of array', &
460	' "pt_vertical_gradient_level_ind" exceeded'
461	ENDIF
462	CALL local_stop
463	ENDIF
464	ENDIF
465	IF ( gradient /= 0.0 ) THEN
466	IF ( k /= 1 ) THEN
467	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
468	ELSE
469	pt_init(k) = pt_init(k-1) + 0.5 * dzu(k) * gradient
470	ENDIF
471	ELSE
472	pt_init(k) = pt_init(k-1)
473	ENDIF
474	ENDDO
475
476	!
477	!-- In case of no given temperature gradients, choose gradient of neutral
478	!-- stratification
479	IF ( pt_vertical_gradient_level(1) == -1.0 ) THEN
480	pt_vertical_gradient_level(1) = 0.0
481	ENDIF
482
483	!
484	!-- Store temperature gradient at the top boundary for possile Neumann
485	!-- boundary condition
486	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
487
488	!
489	!-- If required, compute initial humidity or scalar profile using the given
490	!-- humidity/scalar gradient. In case of scalar transport, initially store
491	!-- values of the scalar parameters on humidity parameters
492	IF ( passive_scalar ) THEN
493	bc_q_b = bc_s_b
494	bc_q_t = bc_s_t
495	q_surface = s_surface
496	q_surface_initial_change = s_surface_initial_change
497	q_vertical_gradient = s_vertical_gradient
498	q_vertical_gradient_level = s_vertical_gradient_level
499	surface_waterflux = surface_scalarflux
500	ENDIF
501
502	IF ( moisture .OR. passive_scalar ) THEN
503
504	i = 1
505	gradient = 0.0
506	q_vertical_gradient_level_ind(1) = 0
507	DO k = 1, nzt+1
508	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
509	q_vertical_gradient_level(i) >= 0.0 ) THEN
510	gradient = q_vertical_gradient(i) / 100.0
511	q_vertical_gradient_level_ind(i) = k - 1
512	i = i + 1
513	IF ( i > 10 ) THEN
514	IF ( myid == 0 ) THEN
515	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
516	'ay "q_vertical_gradient_level_ind" exceeded'
517	ENDIF
518	CALL local_stop
519	ENDIF
520	ENDIF
521	IF ( gradient /= 0.0 ) THEN
522	IF ( k /= 1 ) THEN
523	q_init(k) = q_init(k-1) + dzu(k) * gradient
524	ELSE
525	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
526	ENDIF
527	ELSE
528	q_init(k) = q_init(k-1)
529	ENDIF
530	ENDDO
531
532	!
533	!-- In case of no given humidity gradients, choose zero gradient
534	!-- conditions
535	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
536	q_vertical_gradient_level(1) = 0.0
537	ENDIF
538
539	!
540	!-- Store humidity gradient at the top boundary for possile Neumann
541	!-- boundary condition
542	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
543
544	ENDIF
545
546	ENDIF
547
548	!
549	!-- Compute Coriolis parameter
550	f = 2.0 * omega * SIN( phi / 180.0 * pi )
551	fs = 2.0 * omega * COS( phi / 180.0 * pi )
552
553	!
554	!-- In case of a given slope, compute the relevant quantities
555	IF ( alpha_surface /= 0.0 ) THEN
556	IF ( ABS( alpha_surface ) > 90.0 ) THEN
557	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
558	'=', alpha_surface, ' ) must be < 90.0'
559	CALL local_stop
560	ENDIF
561	sloping_surface = .TRUE.
562	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
563	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
564	ENDIF
565
566	!
567	!-- Check time step and cfl_factor
568	IF ( dt /= -1.0 ) THEN
569	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
570	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
571	CALL local_stop
572	ENDIF
573	dt_3d = dt
574	dt_fixed = .TRUE.
575	ENDIF
576
577	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
578	IF ( cfl_factor == -1.0 ) THEN
579	IF ( momentum_advec == 'ups-scheme' .OR. &
580	scalar_advec == 'ups-scheme' ) THEN
581	cfl_factor = 0.8
582	ELSE
583	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
584	cfl_factor = 0.8
585	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
586	cfl_factor = 0.9
587	ELSE
588	cfl_factor = 0.1
589	ENDIF
590	ENDIF
591	ELSE
592	IF ( myid == 0 ) THEN
593	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
594	' out of range'
595	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
596	ENDIF
597	CALL local_stop
598	ENDIF
599	ENDIF
600
601	!
602	!-- Store simulated time at begin
603	simulated_time_at_begin = simulated_time
604
605	!
606	!-- Set wind speed in the Galilei-transformed system
607	IF ( galilei_transformation ) THEN
608	IF ( use_ug_for_galilei_tr .AND. &
609	ug_vertical_gradient_level(1) == 0.0 .AND. &
610	vg_vertical_gradient_level(1) == 0.0 ) THEN
611	u_gtrans = ug_surface
612	v_gtrans = vg_surface
613	ELSEIF ( use_ug_for_galilei_tr .AND. &
614	ug_vertical_gradient_level(1) /= 0.0 ) THEN
615	IF ( myid == 0 ) THEN
616	PRINT*, '+++ check_parameters:'
617	PRINT*, ' baroclinicity (ug) not allowed'
618	PRINT*, ' simultaneously with galilei transformation'
619	ENDIF
620	CALL local_stop
621	ELSEIF ( use_ug_for_galilei_tr .AND. &
622	vg_vertical_gradient_level(1) /= 0.0 ) THEN
623	IF ( myid == 0 ) THEN
624	PRINT*, '+++ check_parameters:'
625	PRINT*, ' baroclinicity (vg) not allowed'
626	PRINT*, ' simultaneously with galilei transformation'
627	ENDIF
628	CALL local_stop
629	ELSE
630	IF ( myid == 0 ) THEN
631	PRINT*, '+++ WARNING: check_parameters:'
632	PRINT*, ' variable translation speed used for galilei-tran' // &
633	'sformation, which'
634	PRINT*, ' may cause instabilities in stably stratified regions'
635	ENDIF
636	ENDIF
637	ENDIF
638
639	!
640	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
641	!-- fluxes have to be used in the diffusion-terms
642	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
643
644	!
645	!-- Check boundary conditions and set internal variables:
646	!-- Lateral boundary conditions
647	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/neumann' .AND. &
648	bc_lr /= 'neumann/dirichlet' ) THEN
649	IF ( myid == 0 ) THEN
650	PRINT*, '+++ check_parameters:'
651	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
652	ENDIF
653	CALL local_stop
654	ENDIF
655	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/neumann' .AND. &
656	bc_ns /= 'neumann/dirichlet' ) THEN
657	IF ( myid == 0 ) THEN
658	PRINT*, '+++ check_parameters:'
659	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
660	ENDIF
661	CALL local_stop
662	ENDIF
663
664	!
665	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
666	!-- Willimas advection scheme. Several schemes and tools do not work with
667	!-- non-cyclic boundary conditions.
668	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
669	IF ( psolver /= 'multigrid' ) THEN
670	IF ( myid == 0 ) THEN
671	PRINT*, '+++ check_parameters:'
672	PRINT*, ' non-cyclic lateral boundaries do not allow', &
673	' psolver = ', psolver
674	ENDIF
675	CALL local_stop
676	ENDIF
677	IF ( momentum_advec /= 'pw-scheme' ) THEN
678	IF ( myid == 0 ) THEN
679	PRINT*, '+++ check_parameters:'
680	PRINT*, ' non-cyclic lateral boundaries do not allow', &
681	' momentum_advec = ', momentum_advec
682	ENDIF
683	CALL local_stop
684	ENDIF
685	IF ( scalar_advec /= 'pw-scheme' ) THEN
686	IF ( myid == 0 ) THEN
687	PRINT*, '+++ check_parameters:'
688	PRINT*, ' non-cyclic lateral boundaries do not allow', &
689	' scalar_advec = ', scalar_advec
690	ENDIF
691	CALL local_stop
692	ENDIF
693	IF ( galilei_transformation ) THEN
694	IF ( myid == 0 ) THEN
695	PRINT*, '+++ check_parameters:'
696	PRINT*, ' non-cyclic lateral boundaries do not allow', &
697	' galilei_transformation = .T.'
698	ENDIF
699	CALL local_stop
700	ENDIF
701	IF ( conserve_volume_flow ) THEN
702	IF ( myid == 0 ) THEN
703	PRINT*, '+++ check_parameters:'
704	PRINT*, ' non-cyclic lateral boundaries do not allow', &
705	' conserve_volume_flow = .T.'
706	ENDIF
707	CALL local_stop
708	ENDIF
709	ENDIF
710
711	!
712	!-- Bottom boundary condition for the turbulent Kinetic energy
713	IF ( bc_e_b == 'neumann' ) THEN
714	ibc_e_b = 1
715	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
716	IF ( myid == 0 ) THEN
717	PRINT*, '+++ WARNING: check_parameters:'
718	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
719	ENDIF
720	ENDIF
721	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
722	ibc_e_b = 2
723	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
724	IF ( myid == 0 ) THEN
725	PRINT*, '+++ WARNING: check_parameters:'
726	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
727	ENDIF
728	ENDIF
729	IF ( .NOT. prandtl_layer ) THEN
730	bc_e_b = 'neumann'
731	ibc_e_b = 1
732	IF ( myid == 0 ) THEN
733	PRINT*, '+++ WARNING: check_parameters:'
734	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
735	ENDIF
736	ENDIF
737	ELSE
738	IF ( myid == 0 ) THEN
739	PRINT*, '+++ check_parameters:'
740	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
741	ENDIF
742	CALL local_stop
743	ENDIF
744
745	!
746	!-- Boundary conditions for perturbation pressure
747	IF ( bc_p_b == 'dirichlet' ) THEN
748	ibc_p_b = 0
749	ELSEIF ( bc_p_b == 'neumann' ) THEN
750	ibc_p_b = 1
751	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
752	ibc_p_b = 2
753	ELSE
754	IF ( myid == 0 ) THEN
755	PRINT*, '+++ check_parameters:'
756	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
757	ENDIF
758	CALL local_stop
759	ENDIF
760	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
761	IF ( myid == 0 ) THEN
762	PRINT*, '+++ check_parameters:'
763	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
764	' not allowed with'
765	PRINT*, ' prandtl_layer = .FALSE.'
766	ENDIF
767	CALL local_stop
768	ENDIF
769	IF ( bc_p_t == 'dirichlet' ) THEN
770	ibc_p_t = 0
771	ELSEIF ( bc_p_t == 'neumann' ) THEN
772	ibc_p_t = 1
773	ELSE
774	IF ( myid == 0 ) THEN
775	PRINT*, '+++ check_parameters:'
776	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
777	ENDIF
778	CALL local_stop
779	ENDIF
780
781	!
782	!-- Boundary conditions for potential temperature
783	IF ( bc_pt_b == 'dirichlet' ) THEN
784	ibc_pt_b = 0
785	ELSEIF ( bc_pt_b == 'neumann' ) THEN
786	ibc_pt_b = 1
787	ELSE
788	IF ( myid == 0 ) THEN
789	PRINT*, '+++ check_parameters:'
790	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
791	ENDIF
792	CALL local_stop
793	ENDIF
794	IF ( bc_pt_t == 'dirichlet' ) THEN
795	ibc_pt_t = 0
796	ELSEIF ( bc_pt_t == 'neumann' ) THEN
797	ibc_pt_t = 1
798	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
799	ibc_pt_t = 2
800	ELSE
801	IF ( myid == 0 ) THEN
802	PRINT*, '+++ check_parameters:'
803	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
804	ENDIF
805	CALL local_stop
806	ENDIF
807
808	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
809	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
810
811	!
812	!-- A given surface temperature implies Dirichlet boundary condition for
813	!-- temperature. In this case specification of a constant heat flux is
814	!-- forbidden.
815	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
816	surface_heatflux /= 0.0 ) THEN
817	IF ( myid == 0 ) THEN
818	PRINT*, '+++ check_parameters:'
819	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
820	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
821	ENDIF
822	CALL local_stop
823	ENDIF
824	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
825	IF ( myid == 0 ) THEN
826	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
827	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
828	pt_surface_initial_change
829	ENDIF
830	CALL local_stop
831	ENDIF
832
833	!
834	!-- A given temperature at the top implies Dirichlet boundary condition for
835	!-- temperature. In this case specification of a constant heat flux is
836	!-- forbidden.
837	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
838	top_heatflux /= 0.0 ) THEN
839	IF ( myid == 0 ) THEN
840	PRINT*, '+++ check_parameters:'
841	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
842	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
843	ENDIF
844	CALL local_stop
845	ENDIF
846
847	!
848	!-- In case of moisture or passive scalar, set boundary conditions for total
849	!-- water content / scalar
850	IF ( moisture .OR. passive_scalar ) THEN
851	IF ( moisture ) THEN
852	sq = 'q'
853	ELSE
854	sq = 's'
855	ENDIF
856	IF ( bc_q_b == 'dirichlet' ) THEN
857	ibc_q_b = 0
858	ELSEIF ( bc_q_b == 'neumann' ) THEN
859	ibc_q_b = 1
860	ELSE
861	IF ( myid == 0 ) THEN
862	PRINT*, '+++ check_parameters:'
863	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
864	ENDIF
865	CALL local_stop
866	ENDIF
867	IF ( bc_q_t == 'dirichlet' ) THEN
868	ibc_q_t = 0
869	ELSEIF ( bc_q_t == 'neumann' ) THEN
870	ibc_q_t = 1
871	ELSE
872	IF ( myid == 0 ) THEN
873	PRINT*, '+++ check_parameters:'
874	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
875	ENDIF
876	CALL local_stop
877	ENDIF
878
879	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
880
881	!
882	!-- A given surface humidity implies Dirichlet boundary condition for
883	!-- moisture. In this case specification of a constant water flux is
884	!-- forbidden.
885	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
886	IF ( myid == 0 ) THEN
887	PRINT*, '+++ check_parameters:'
888	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
889	PRINT*, ' is not allowed with prescribed surface flux'
890	ENDIF
891	CALL local_stop
892	ENDIF
893	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
894	IF ( myid == 0 ) THEN
895	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
896	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
897	' = ', q_surface_initial_change
898	ENDIF
899	CALL local_stop
900	ENDIF
901
902	ENDIF
903
904	!
905	!-- Boundary conditions for horizontal components of wind speed
906	IF ( bc_uv_b == 'dirichlet' ) THEN
907	ibc_uv_b = 0
908	ELSEIF ( bc_uv_b == 'neumann' ) THEN
909	ibc_uv_b = 1
910	IF ( prandtl_layer ) THEN
911	IF ( myid == 0 ) THEN
912	PRINT*, '+++ check_parameters:'
913	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
914	' is not allowed with'
915	PRINT*, ' prandtl_layer = .TRUE.'
916	ENDIF
917	CALL local_stop
918	ENDIF
919	ELSE
920	IF ( myid == 0 ) THEN
921	PRINT*, '+++ check_parameters:'
922	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
923	ENDIF
924	CALL local_stop
925	ENDIF
926	IF ( bc_uv_t == 'dirichlet' ) THEN
927	ibc_uv_t = 0
928	ELSEIF ( bc_uv_t == 'neumann' ) THEN
929	ibc_uv_t = 1
930	ELSE
931	IF ( myid == 0 ) THEN
932	PRINT*, '+++ check_parameters:'
933	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
934	ENDIF
935	CALL local_stop
936	ENDIF
937
938	!
939	!-- Compute and check, respectively, the Rayleigh Damping parameter
940	IF ( rayleigh_damping_factor == -1.0 ) THEN
941	IF ( momentum_advec == 'ups-scheme' ) THEN
942	rayleigh_damping_factor = 0.01
943	ELSE
944	rayleigh_damping_factor = 0.0
945	ENDIF
946	ELSE
947	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
948	THEN
949	IF ( myid == 0 ) THEN
950	PRINT*, '+++ check_parameters:'
951	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
952	' out of range [0.0,1.0]'
953	ENDIF
954	CALL local_stop
955	ENDIF
956	ENDIF
957
958	IF ( rayleigh_damping_height == -1.0 ) THEN
959	rayleigh_damping_height = 0.66666666666 * zu(nzt)
960	ELSE
961	IF ( rayleigh_damping_height < 0.0 .OR. &
962	rayleigh_damping_height > zu(nzt) ) THEN
963	IF ( myid == 0 ) THEN
964	PRINT*, '+++ check_parameters:'
965	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
966	' out of range [0.0,', zu(nzt), ']'
967	ENDIF
968	CALL local_stop
969	ENDIF
970	ENDIF
971
972	!
973	!-- Check limiters for Upstream-Spline scheme
974	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
975	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
976	overshoot_limit_e < 0.0 ) THEN
977	IF ( myid == 0 ) THEN
978	PRINT*, '+++ check_parameters:'
979	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
980	ENDIF
981	CALL local_stop
982	ENDIF
983	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
984	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
985	IF ( myid == 0 ) THEN
986	PRINT*, '+++ check_parameters:'
987	PRINT*, ' ups_limit_... < 0.0 is not allowed'
988	ENDIF
989	CALL local_stop
990	ENDIF
991
992	!
993	!-- Check number of chosen statistic regions. More than 10 regions are not
994	!-- allowed, because so far no more than 10 corresponding output files can
995	!-- be opened (cf. check_open)
996	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
997	IF ( myid == 0 ) THEN
998	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
999	statistic_regions+1
1000	PRINT*, ' Only 10 regions are allowed'
1001	ENDIF
1002	CALL local_stop
1003	ENDIF
1004	IF ( normalizing_region > statistic_regions .OR. &
1005	normalizing_region < 0) THEN
1006	IF ( myid == 0 ) THEN
1007	PRINT*, '+++ check_parameters: normalizing_region = ', &
1008	normalizing_region, ' is unknown'
1009	PRINT*, ' Must be <= ', statistic_regions
1010	ENDIF
1011	CALL local_stop
1012	ENDIF
1013
1014	!
1015	!-- Set the default intervals for data output, if necessary
1016	!-- NOTE: dt_dosp has already been set in package_parin
1017	IF ( dt_data_output /= 9999999.9 ) THEN
1018	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1019	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1020	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1021	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1022	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1023	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1024	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1025	ENDIF
1026
1027	!
1028	!-- Set the default skip time intervals for data output, if necessary
1029	IF ( skip_time_dopr == 9999999.9 ) &
1030	skip_time_dopr = skip_time_data_output
1031	IF ( skip_time_dosp == 9999999.9 ) &
1032	skip_time_dosp = skip_time_data_output
1033	IF ( skip_time_do2d_xy == 9999999.9 ) &
1034	skip_time_do2d_xy = skip_time_data_output
1035	IF ( skip_time_do2d_xz == 9999999.9 ) &
1036	skip_time_do2d_xz = skip_time_data_output
1037	IF ( skip_time_do2d_yz == 9999999.9 ) &
1038	skip_time_do2d_yz = skip_time_data_output
1039	IF ( skip_time_do3d == 9999999.9 ) &
1040	skip_time_do3d = skip_time_data_output
1041	IF ( skip_time_data_output_av == 9999999.9 ) &
1042	skip_time_data_output_av = skip_time_data_output
1043
1044	!
1045	!-- Check the average intervals (first for 3d-data, then for profiles and
1046	!-- spectra)
1047	IF ( averaging_interval > dt_data_output_av ) THEN
1048	IF ( myid == 0 ) THEN
1049	PRINT*, '+++ check_parameters: average_interval=', &
1050	averaging_interval, ' must be <= dt_data_output=', &
1051	dt_data_output
1052	ENDIF
1053	CALL local_stop
1054	ENDIF
1055
1056	IF ( averaging_interval_pr == 9999999.9 ) THEN
1057	averaging_interval_pr = averaging_interval
1058	ENDIF
1059
1060	IF ( averaging_interval_pr > dt_dopr ) THEN
1061	IF ( myid == 0 ) THEN
1062	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1063	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1064	ENDIF
1065	CALL local_stop
1066	ENDIF
1067
1068	IF ( averaging_interval_sp == 9999999.9 ) THEN
1069	averaging_interval_sp = averaging_interval
1070	ENDIF
1071
1072	IF ( averaging_interval_sp > dt_dosp ) THEN
1073	IF ( myid == 0 ) THEN
1074	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1075	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1076	ENDIF
1077	CALL local_stop
1078	ENDIF
1079
1080	!
1081	!-- Set the default interval for profiles entering the temporal average
1082	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1083	dt_averaging_input_pr = dt_averaging_input
1084	ENDIF
1085
1086	!
1087	!-- Set the default interval for the output of timeseries to a reasonable
1088	!-- value (tries to minimize the number of calls of flow_statistics)
1089	IF ( dt_dots == 9999999.9 ) THEN
1090	IF ( averaging_interval_pr == 0.0 ) THEN
1091	dt_dots = MIN( dt_run_control, dt_dopr )
1092	ELSE
1093	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1094	ENDIF
1095	ENDIF
1096
1097	!
1098	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1099	IF ( dt_averaging_input > averaging_interval ) THEN
1100	IF ( myid == 0 ) THEN
1101	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1102	dt_averaging_input, ' must be <= averaging_interval=', &
1103	averaging_interval
1104	ENDIF
1105	CALL local_stop
1106	ENDIF
1107
1108	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1109	IF ( myid == 0 ) THEN
1110	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1111	dt_averaging_input_pr, &
1112	' must be <= averaging_interval_pr=', &
1113	averaging_interval_pr
1114	ENDIF
1115	CALL local_stop
1116	ENDIF
1117
1118	!
1119	!-- Determine the number of output profiles and check whether they are
1120	!-- permissible
1121	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1122
1123	dopr_n = dopr_n + 1
1124	i = dopr_n
1125
1126	!
1127	!-- Determine internal profile number (for hom, homs)
1128	!-- and store height levels
1129	SELECT CASE ( TRIM( data_output_pr(i) ) )
1130
1131	CASE ( 'u', '#u' )
1132	dopr_index(i) = 1
1133	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1134	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1135	dopr_initial_index(i) = 5
1136	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1137	data_output_pr(i) = data_output_pr(i)(2:)
1138	ENDIF
1139
1140	CASE ( 'v', '#v' )
1141	dopr_index(i) = 2
1142	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1143	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1144	dopr_initial_index(i) = 6
1145	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1146	data_output_pr(i) = data_output_pr(i)(2:)
1147	ENDIF
1148
1149	CASE ( 'w' )
1150	dopr_index(i) = 3
1151	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1152
1153	CASE ( 'pt', '#pt' )
1154	IF ( .NOT. cloud_physics ) THEN
1155	dopr_index(i) = 4
1156	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1157	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1158	dopr_initial_index(i) = 7
1159	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1160	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1161	data_output_pr(i) = data_output_pr(i)(2:)
1162	ENDIF
1163	ELSE
1164	dopr_index(i) = 43
1165	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1166	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1167	dopr_initial_index(i) = 28
1168	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1169	hom(nzb,2,28,:) = 0.0 ! weil zu(nzb) negativ ist
1170	data_output_pr(i) = data_output_pr(i)(2:)
1171	ENDIF
1172	ENDIF
1173
1174	CASE ( 'e' )
1175	dopr_index(i) = 8
1176	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1177	hom(nzb,2,8,:) = 0.0
1178
1179	CASE ( 'km', '#km' )
1180	dopr_index(i) = 9
1181	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1182	hom(nzb,2,9,:) = 0.0
1183	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1184	dopr_initial_index(i) = 23
1185	hom(:,2,23,:) = hom(:,2,9,:)
1186	data_output_pr(i) = data_output_pr(i)(2:)
1187	ENDIF
1188
1189	CASE ( 'kh', '#kh' )
1190	dopr_index(i) = 10
1191	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1192	hom(nzb,2,10,:) = 0.0
1193	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1194	dopr_initial_index(i) = 24
1195	hom(:,2,24,:) = hom(:,2,10,:)
1196	data_output_pr(i) = data_output_pr(i)(2:)
1197	ENDIF
1198
1199	CASE ( 'l', '#l' )
1200	dopr_index(i) = 11
1201	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1202	hom(nzb,2,11,:) = 0.0
1203	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1204	dopr_initial_index(i) = 25
1205	hom(:,2,25,:) = hom(:,2,11,:)
1206	data_output_pr(i) = data_output_pr(i)(2:)
1207	ENDIF
1208
1209	CASE ( 'w"u"' )
1210	dopr_index(i) = 12
1211	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1212	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1213
1214	CASE ( 'wu' )
1215	dopr_index(i) = 13
1216	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1217
1218	CASE ( 'w"v"' )
1219	dopr_index(i) = 14
1220	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1221	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1222
1223	CASE ( 'wv' )
1224	dopr_index(i) = 15
1225	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1226
1227	CASE ( 'w"pt"' )
1228	dopr_index(i) = 16
1229	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1230
1231	CASE ( 'wpt' )
1232	dopr_index(i) = 17
1233	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1234
1235	CASE ( 'wpt' )
1236	dopr_index(i) = 18
1237	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1238
1239	CASE ( 'wu' )
1240	dopr_index(i) = 19
1241	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1242	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1243
1244	CASE ( 'wv' )
1245	dopr_index(i) = 20
1246	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1247	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1248
1249	CASE ( 'wptBC' )
1250	dopr_index(i) = 21
1251	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1252
1253	CASE ( 'wptBC' )
1254	dopr_index(i) = 22
1255	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1256
1257	CASE ( 'u*2' )
1258	dopr_index(i) = 30
1259	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1260
1261	CASE ( 'v*2' )
1262	dopr_index(i) = 31
1263	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1264
1265	CASE ( 'w*2' )
1266	dopr_index(i) = 32
1267	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1268
1269	CASE ( 'pt*2' )
1270	dopr_index(i) = 33
1271	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1272
1273	CASE ( 'e*' )
1274	dopr_index(i) = 34
1275	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1276
1277	CASE ( 'w2pt' )
1278	dopr_index(i) = 35
1279	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1280
1281	CASE ( 'wpt2' )
1282	dopr_index(i) = 36
1283	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1284
1285	CASE ( 'we' )
1286	dopr_index(i) = 37
1287	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1288
1289	CASE ( 'w*3' )
1290	dopr_index(i) = 38
1291	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1292
1293	CASE ( 'Sw' )
1294	dopr_index(i) = 39
1295	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1296
1297	CASE ( 'q', '#q' )
1298	IF ( .NOT. cloud_physics ) THEN
1299	IF ( myid == 0 ) THEN
1300	PRINT*, '+++ check_parameters: data_output_pr = ', &
1301	data_output_pr(i), &
1302	' is not implemented for cloud_physics = FALSE'
1303	ENDIF
1304	CALL local_stop
1305	ELSE
1306	dopr_index(i) = 41
1307	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1308	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1309	dopr_initial_index(i) = 26
1310	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1311	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1312	data_output_pr(i) = data_output_pr(i)(2:)
1313	ENDIF
1314	ENDIF
1315
1316	CASE ( 's', '#s' )
1317	IF ( .NOT. passive_scalar ) THEN
1318	IF ( myid == 0 ) THEN
1319	PRINT*, '+++ check_parameters: data_output_pr = ', &
1320	data_output_pr(i), &
1321	' is not implemented for passive_scalar = FALSE'
1322	ENDIF
1323	CALL local_stop
1324	ELSE
1325	dopr_index(i) = 41
1326	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1327	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1328	dopr_initial_index(i) = 26
1329	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1330	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1331	data_output_pr(i) = data_output_pr(i)(2:)
1332	ENDIF
1333	ENDIF
1334
1335	CASE ( 'qv', '#qv' )
1336	IF ( .NOT. cloud_physics ) THEN
1337	dopr_index(i) = 41
1338	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1339	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1340	dopr_initial_index(i) = 26
1341	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1342	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1343	data_output_pr(i) = data_output_pr(i)(2:)
1344	ENDIF
1345	ELSE
1346	dopr_index(i) = 42
1347	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1348	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1349	dopr_initial_index(i) = 27
1350	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1351	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1352	data_output_pr(i) = data_output_pr(i)(2:)
1353	ENDIF
1354	ENDIF
1355
1356	CASE ( 'lpt', '#lpt' )
1357	IF ( .NOT. cloud_physics ) THEN
1358	IF ( myid == 0 ) THEN
1359	PRINT*, '+++ check_parameters: data_output_pr = ', &
1360	data_output_pr(i), &
1361	' is not implemented for cloud_physics = FALSE'
1362	ENDIF
1363	CALL local_stop
1364	ELSE
1365	dopr_index(i) = 4
1366	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1367	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1368	dopr_initial_index(i) = 7
1369	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1370	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1371	data_output_pr(i) = data_output_pr(i)(2:)
1372	ENDIF
1373	ENDIF
1374
1375	CASE ( 'vpt', '#vpt' )
1376	dopr_index(i) = 44
1377	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1378	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1379	dopr_initial_index(i) = 29
1380	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1381	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1382	data_output_pr(i) = data_output_pr(i)(2:)
1383	ENDIF
1384
1385	CASE ( 'w"vpt"' )
1386	dopr_index(i) = 45
1387	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1388
1389	CASE ( 'wvpt' )
1390	dopr_index(i) = 46
1391	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1392
1393	CASE ( 'wvpt' )
1394	dopr_index(i) = 47
1395	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1396
1397	CASE ( 'w"q"' )
1398	IF ( .NOT. cloud_physics ) THEN
1399	IF ( myid == 0 ) THEN
1400	PRINT*, '+++ check_parameters: data_output_pr = ', &
1401	data_output_pr(i), &
1402	' is not implemented for cloud_physics = FALSE'
1403	ENDIF
1404	CALL local_stop
1405	ELSE
1406	dopr_index(i) = 48
1407	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1408	ENDIF
1409
1410	CASE ( 'wq' )
1411	IF ( .NOT. cloud_physics ) THEN
1412	IF ( myid == 0 ) THEN
1413	PRINT*, '+++ check_parameters: data_output_pr = ', &
1414	data_output_pr(i), &
1415	' is not implemented for cloud_physics = FALSE'
1416	ENDIF
1417	CALL local_stop
1418	ELSE
1419	dopr_index(i) = 49
1420	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1421	ENDIF
1422
1423	CASE ( 'wq' )
1424	IF ( .NOT. cloud_physics ) THEN
1425	IF ( myid == 0 ) THEN
1426	PRINT*, '+++ check_parameters: data_output_pr = ', &
1427	data_output_pr(i), &
1428	' is not implemented for cloud_physics = FALSE'
1429	ENDIF
1430	CALL local_stop
1431	ELSE
1432	dopr_index(i) = 50
1433	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1434	ENDIF
1435
1436	CASE ( 'w"s"' )
1437	IF ( .NOT. passive_scalar ) THEN
1438	IF ( myid == 0 ) THEN
1439	PRINT*, '+++ check_parameters: data_output_pr = ', &
1440	data_output_pr(i), &
1441	' is not implemented for passive_scalar = FALSE'
1442	ENDIF
1443	CALL local_stop
1444	ELSE
1445	dopr_index(i) = 48
1446	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1447	ENDIF
1448
1449	CASE ( 'ws' )
1450	IF ( .NOT. passive_scalar ) THEN
1451	IF ( myid == 0 ) THEN
1452	PRINT*, '+++ check_parameters: data_output_pr = ', &
1453	data_output_pr(i), &
1454	' is not implemented for passive_scalar = FALSE'
1455	ENDIF
1456	CALL local_stop
1457	ELSE
1458	dopr_index(i) = 49
1459	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1460	ENDIF
1461
1462	CASE ( 'ws' )
1463	IF ( .NOT. passive_scalar ) THEN
1464	IF ( myid == 0 ) THEN
1465	PRINT*, '+++ check_parameters: data_output_pr = ', &
1466	data_output_pr(i), &
1467	' is not implemented for passive_scalar = FALSE'
1468	ENDIF
1469	CALL local_stop
1470	ELSE
1471	dopr_index(i) = 50
1472	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1473	ENDIF
1474
1475	CASE ( 'w"qv"' )
1476	IF ( moisture .AND. .NOT. cloud_physics ) &
1477	THEN
1478	dopr_index(i) = 48
1479	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1480	ELSEIF( moisture .AND. cloud_physics ) THEN
1481	dopr_index(i) = 51
1482	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1483	ELSE
1484	IF ( myid == 0 ) THEN
1485	PRINT*, '+++ check_parameters: data_output_pr = ', &
1486	data_output_pr(i), &
1487	' is not implemented for cloud_physics = FALSE', &
1488	' and moisture = FALSE'
1489	ENDIF
1490	CALL local_stop
1491	ENDIF
1492
1493	CASE ( 'wqv' )
1494	IF ( moisture .AND. .NOT. cloud_physics ) &
1495	THEN
1496	dopr_index(i) = 49
1497	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1498	ELSEIF( moisture .AND. cloud_physics ) THEN
1499	dopr_index(i) = 52
1500	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1501	ELSE
1502	IF ( myid == 0 ) THEN
1503	PRINT*, '+++ check_parameters: data_output_pr = ', &
1504	data_output_pr(i), &
1505	' is not implemented for cloud_physics = FALSE', &
1506	' and moisture = FALSE'
1507	ENDIF
1508	CALL local_stop
1509	ENDIF
1510
1511	CASE ( 'wqv' )
1512	IF ( moisture .AND. .NOT. cloud_physics ) &
1513	THEN
1514	dopr_index(i) = 50
1515	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1516	ELSEIF( moisture .AND. cloud_physics ) THEN
1517	dopr_index(i) = 53
1518	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
1519	ELSE
1520	IF ( myid == 0 ) THEN
1521	PRINT*, '+++ check_parameters: data_output_pr = ', &
1522	data_output_pr(i), &
1523	' is not implemented for cloud_physics = FALSE', &
1524	' and moisture = FALSE'
1525	ENDIF
1526	CALL local_stop
1527	ENDIF
1528
1529	CASE ( 'ql' )
1530	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
1531	IF ( myid == 0 ) THEN
1532	PRINT*, '+++ check_parameters: data_output_pr = ', &
1533	data_output_pr(i), &
1534	' is not implemented for cloud_physics = FALSE'
1535	ENDIF
1536	CALL local_stop
1537	ELSE
1538	dopr_index(i) = 54
1539	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
1540	ENDIF
1541
1542	CASE ( 'wuu*/dz' )
1543	dopr_index(i) = 55
1544	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
1545
1546	CASE ( 'wp/dz' )
1547	dopr_index(i) = 56
1548	hom(:,2,56,:) = SPREAD( zu, 2, statistic_regions+1 )
1549
1550	CASE ( 'w"e/dz' )
1551	dopr_index(i) = 57
1552	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
1553
1554	CASE ( 'u"pt"' )
1555	dopr_index(i) = 58
1556	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
1557
1558	CASE ( 'upt' )
1559	dopr_index(i) = 59
1560	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
1561
1562	CASE ( 'upt_t' )
1563	dopr_index(i) = 60
1564	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
1565
1566	CASE ( 'v"pt"' )
1567	dopr_index(i) = 61
1568	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
1569
1570	CASE ( 'vpt' )
1571	dopr_index(i) = 62
1572	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
1573
1574	CASE ( 'vpt_t' )
1575	dopr_index(i) = 63
1576	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
1577
1578
1579	CASE DEFAULT
1580	IF ( myid == 0 ) THEN
1581	PRINT*, '+++ check_parameters: unknown output profile: ', &
1582	'data_output_pr = ', data_output_pr(i)
1583	ENDIF
1584	CALL local_stop
1585
1586	END SELECT
1587	!
1588	!-- Check to which of the predefined coordinate systems the profile belongs
1589	DO k = 1, crmax
1590	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
1591	/=0 ) &
1592	THEN
1593	dopr_crossindex(i) = k
1594	EXIT
1595	ENDIF
1596	ENDDO
1597	!
1598	!-- Generate the text for the labels of the PROFIL output file. "-characters
1599	!-- must be substituted, otherwise PROFIL would interpret them as TeX
1600	!-- control characters
1601	dopr_label(i) = data_output_pr(i)
1602	position = INDEX( dopr_label(i) , '"' )
1603	DO WHILE ( position /= 0 )
1604	dopr_label(i)(position:position) = ''''
1605	position = INDEX( dopr_label(i) , '"' )
1606	ENDDO
1607
1608	ENDDO
1609
1610	!
1611	!-- y-value range of the coordinate system (PROFIL).
1612	!-- x-value range determined in plot_1d.
1613	cross_uymin = 0.0
1614	IF ( z_max_do1d == -1.0 ) THEN
1615	cross_uymax = zu(nzt+1)
1616	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
1617	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
1618	z_max_do1d,' must be >= ', zu(nzb+1), &
1619	' or <= ', zu(nzt+1)
1620	CALL local_stop
1621	ELSE
1622	cross_uymax = z_max_do1d
1623	ENDIF
1624
1625	!
1626	!-- Check whether the chosen normalizing factor for the coordinate systems is
1627	!-- permissible
1628	DO i = 1, crmax
1629	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
1630
1631	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
1632	j = 0
1633
1634	CASE DEFAULT
1635	IF ( myid == 0 ) THEN
1636	PRINT*, '+++ check_parameters: unknown normalize method'
1637	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
1638	ENDIF
1639	CALL local_stop
1640
1641	END SELECT
1642	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
1643
1644	CASE ( '', 'z_i' )
1645	j = 0
1646
1647	CASE DEFAULT
1648	IF ( myid == 0 ) THEN
1649	PRINT*, '+++ check_parameters: unknown normalize method'
1650	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
1651	ENDIF
1652	CALL local_stop
1653
1654	END SELECT
1655	ENDDO
1656	!
1657	!-- Check normalized y-value range of the coordinate system (PROFIL)
1658	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
1659	THEN
1660	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
1661	'd=', z_max_do1d_normalized, ' must be >= 0.0'
1662	CALL local_stop
1663	ENDIF
1664
1665	!
1666	!-- Determine parameters for time series output and check whether permissible
1667	i = 0
1668	DO WHILE ( data_output_ts(i+1) /= ' ' .AND. i+1 <= 100 )
1669
1670	dots_n = dots_n + 1
1671	i = i + 1
1672	!
1673	!-- Check whether time series is permissible and determine internal number
1674	SELECT CASE ( TRIM( data_output_ts(i) ) )
1675
1676	CASE ( 'E' )
1677	dots_index(i) = 1
1678	CASE ( 'E*' )
1679	dots_index(i) = 2
1680	CASE ( 'dt' )
1681	dots_index(i) = 3
1682	CASE ( 'u*' )
1683	dots_index(i) = 4
1684	CASE ( 'th*' )
1685	dots_index(i) = 5
1686	CASE ( 'umax' )
1687	dots_index(i) = 6
1688	CASE ( 'vmax' )
1689	dots_index(i) = 7
1690	CASE ( 'wmax' )
1691	dots_index(i) = 8
1692	CASE ( 'div_new' )
1693	dots_index(i) = 9
1694	CASE ( 'div_old' )
1695	dots_index(i) = 10
1696	CASE ( 'z_i_wpt' )
1697	dots_index(i) = 11
1698	CASE ( 'z_i_pt' )
1699	dots_index(i) = 12
1700	CASE ( 'w*' )
1701	dots_index(i) = 13
1702	CASE ( 'w"pt"0' )
1703	dots_index(i) = 14
1704	CASE ( 'w"pt"' )
1705	dots_index(i) = 15
1706	CASE ( 'wpt' )
1707	dots_index(i) = 16
1708	CASE ( 'pt(0)' )
1709	dots_index(i) = 17
1710	CASE ( 'pt(zp)' )
1711	dots_index(i) = 18
1712	CASE ( 'splptx' )
1713	dots_index(i) = 19
1714	CASE ( 'splpty' )
1715	dots_index(i) = 20
1716	CASE ( 'splptz' )
1717	dots_index(i) = 21
1718	CASE ( 'L' )
1719	dots_index(i) = 22
1720
1721	CASE DEFAULT
1722	IF ( myid == 0 ) THEN
1723	PRINT*, '+++ check_parameters: unknown time series: ', &
1724	'data_output_ts = ',&
1725	data_output_ts(i)
1726	ENDIF
1727	CALL local_stop
1728
1729	END SELECT
1730
1731	!
1732	!-- Check, to which predefined coordinate system the time series belongs, and
1733	!-- store corresponding internal number. Furthermore determine, how many and
1734	!-- which graphs are being drawn into the corresponding system
1735	DO k = 1, crmax
1736	IF ( INDEX( cross_ts_profiles(k), ' ' // TRIM( data_output_ts(i) ) &
1737	// ' ' ) /=0 ) &
1738	THEN
1739	dots_crossindex(i) = k
1740	cross_ts_number_count(k) = cross_ts_number_count(k) + 1
1741	cross_ts_numbers(cross_ts_number_count(k),k) = dots_index(i)
1742	EXIT
1743	ENDIF
1744	ENDDO
1745
1746	ENDDO
1747
1748	!
1749	!-- Append user-defined data output variables to the standard data output
1750	IF ( data_output_user(1) /= ' ' ) THEN
1751	i = 1
1752	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
1753	i = i + 1
1754	ENDDO
1755	j = 1
1756	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
1757	IF ( i > 100 ) THEN
1758	IF ( myid == 0 ) THEN
1759	PRINT*, '+++ check_parameters: number of output quantitities', &
1760	' given by data_output and data_output_user'
1761	PRINT*, ' exceeds the limit of 100'
1762	ENDIF
1763	CALL local_stop
1764	ENDIF
1765	data_output(i) = data_output_user(j)
1766	i = i + 1
1767	j = j + 1
1768	ENDDO
1769	ENDIF
1770
1771	!
1772	!-- Check and set steering parameters for 2d/3d data output and averaging
1773	i = 1
1774	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
1775	!
1776	!-- Check for data averaging
1777	ilen = LEN_TRIM( data_output(i) )
1778	j = 0 ! no data averaging
1779	IF ( ilen > 3 ) THEN
1780	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
1781	j = 1 ! data averaging
1782	data_output(i) = data_output(i)(1:ilen-3)
1783	ENDIF
1784	ENDIF
1785	!
1786	!-- Check for cross section or volume data
1787	ilen = LEN_TRIM( data_output(i) )
1788	k = 0 ! 3d data
1789	var = data_output(i)(1:ilen)
1790	IF ( ilen > 3 ) THEN
1791	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
1792	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
1793	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
1794	k = 1 ! 2d data
1795	var = data_output(i)(1:ilen-3)
1796	ENDIF
1797	ENDIF
1798	!
1799	!-- Check for allowed value and set units
1800	SELECT CASE ( TRIM( var ) )
1801
1802	CASE ( 'e' )
1803	IF ( constant_diffusion ) THEN
1804	IF ( myid == 0 ) THEN
1805	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1806	'" requires constant_diffusion = .FALSE.'
1807	ENDIF
1808	CALL local_stop
1809	ENDIF
1810	unit = 'm2/s2'
1811
1812	CASE ( 'pc', 'pr' )
1813	IF ( .NOT. particle_advection ) THEN
1814	IF ( myid == 0 ) THEN
1815	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1816	'" requires particle package'
1817	PRINT*, ' (mrun-option "-p particles")'
1818	ENDIF
1819	CALL local_stop
1820	ENDIF
1821	IF ( TRIM( var ) == 'pc' ) unit = 'number'
1822	IF ( TRIM( var ) == 'pr' ) unit = 'm'
1823
1824	CASE ( 'q', 'vpt' )
1825	IF ( .NOT. moisture ) THEN
1826	IF ( myid == 0 ) THEN
1827	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1828	'" requires moisture = .TRUE.'
1829	ENDIF
1830	CALL local_stop
1831	ENDIF
1832	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
1833	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
1834
1835	CASE ( 'ql' )
1836	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
1837	IF ( myid == 0 ) THEN
1838	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1839	'" requires cloud_physics = .TRUE.'
1840	PRINT*, ' or cloud_droplets = .TRUE.'
1841	ENDIF
1842	CALL local_stop
1843	ENDIF
1844	unit = 'kg/kg'
1845
1846	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
1847	IF ( .NOT. cloud_droplets ) THEN
1848	IF ( myid == 0 ) THEN
1849	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1850	'" requires cloud_droplets = .TRUE.'
1851	ENDIF
1852	CALL local_stop
1853	ENDIF
1854	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
1855	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
1856	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
1857
1858	CASE ( 'qv' )
1859	IF ( .NOT. cloud_physics ) THEN
1860	IF ( myid == 0 ) THEN
1861	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1862	'" requires cloud_physics = .TRUE.'
1863	ENDIF
1864	CALL local_stop
1865	ENDIF
1866	unit = 'kg/kg'
1867
1868	CASE ( 's' )
1869	IF ( .NOT. passive_scalar ) THEN
1870	IF ( myid == 0 ) THEN
1871	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1872	'" requires passive_scalar = .TRUE.'
1873	ENDIF
1874	CALL local_stop
1875	ENDIF
1876	unit = 'conc'
1877
1878	CASE ( 'u', 't', 'lwp*' )
1879	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
1880	IF ( myid == 0 ) THEN
1881	PRINT*, '+++ check_parameters: illegal value for data_',&
1882	'output: "', TRIM( var ), '" is only allowed'
1883	PRINT*, ' for horizontal cross section'
1884	ENDIF
1885	CALL local_stop
1886	ENDIF
1887	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
1888	IF ( myid == 0 ) THEN
1889	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
1890	'" requires cloud_physics = .TRUE.'
1891	ENDIF
1892	CALL local_stop
1893	ENDIF
1894	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
1895	IF ( TRIM( var ) == 't*' ) unit = 'K'
1896	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
1897
1898	CASE ( 'p', 'pt', 'u', 'v', 'w' )
1899	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
1900	IF ( TRIM( var ) == 'pt' ) unit = 'K'
1901	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
1902	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
1903	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
1904	CONTINUE
1905
1906	CASE DEFAULT
1907	CALL user_check_data_output( var, unit )
1908
1909	IF ( unit == 'illegal' ) THEN
1910	IF ( myid == 0 ) THEN
1911	IF ( data_output_user(1) /= ' ' ) THEN
1912	PRINT*, '+++ check_parameters: illegal value for data_',&
1913	'output or data_output_user: "', &
1914	TRIM( data_output(i) ), '"'
1915	ELSE
1916	PRINT*, '+++ check_parameters: illegal value for data_',&
1917	'output: "', TRIM( data_output(i) ), '"'
1918	ENDIF
1919	ENDIF
1920	CALL local_stop
1921	ENDIF
1922
1923	END SELECT
1924	!
1925	!-- Set the internal steering parameters appropriately
1926	IF ( k == 0 ) THEN
1927	do3d_no(j) = do3d_no(j) + 1
1928	do3d(j,do3d_no(j)) = data_output(i)
1929	do3d_unit(j,do3d_no(j)) = unit
1930	ELSE
1931	do2d_no(j) = do2d_no(j) + 1
1932	do2d(j,do2d_no(j)) = data_output(i)
1933	do2d_unit(j,do2d_no(j)) = unit
1934	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
1935	data_output_xy(j) = .TRUE.
1936	ENDIF
1937	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
1938	data_output_xz(j) = .TRUE.
1939	ENDIF
1940	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
1941	data_output_yz(j) = .TRUE.
1942	ENDIF
1943	ENDIF
1944
1945	IF ( j == 1 ) THEN
1946	!
1947	!-- Check, if variable is already subject to averaging
1948	found = .FALSE.
1949	DO k = 1, doav_n
1950	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
1951	ENDDO
1952
1953	IF ( .NOT. found ) THEN
1954	doav_n = doav_n + 1
1955	doav(doav_n) = var
1956	ENDIF
1957	ENDIF
1958
1959	i = i + 1
1960	ENDDO
1961
1962	!
1963	!-- Store sectional planes in one shared array
1964	section(:,1) = section_xy
1965	section(:,2) = section_xz
1966	section(:,3) = section_yz
1967
1968	!
1969	!-- Upper plot limit (grid point value) for 1D profiles
1970	IF ( z_max_do1d == -1.0 ) THEN
1971	nz_do1d = nzt+1
1972	ELSE
1973	DO k = nzb+1, nzt+1
1974	nz_do1d = k
1975	IF ( zw(k) > z_max_do1d ) EXIT
1976	ENDDO
1977	ENDIF
1978
1979	!
1980	!-- Upper plot limit for 2D vertical sections
1981	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
1982	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
1983	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
1984	z_max_do2d, ' must be >= ', zu(nzb+1), &
1985	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
1986	CALL local_stop
1987	ENDIF
1988
1989	!
1990	!-- Upper plot limit for 3D arrays
1991	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
1992
1993	!
1994	!-- Determine and check accuracy for compressed 3D plot output
1995	IF ( do3d_compress ) THEN
1996	!
1997	!-- Compression only permissible on T3E machines
1998	IF ( host(1:3) /= 't3e' ) THEN
1999	IF ( myid == 0 ) THEN
2000	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
2001	'ed on host "', TRIM( host ), '"'
2002	ENDIF
2003	CALL local_stop
2004	ENDIF
2005
2006	i = 1
2007	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2008
2009	ilen = LEN_TRIM( do3d_comp_prec(i) )
2010	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2011	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2012	IF ( myid == 0 ) THEN
2013	PRINT*, '+++ check_parameters: illegal precision: ', &
2014	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
2015	ENDIF
2016	CALL local_stop
2017	ENDIF
2018
2019	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2020	var = do3d_comp_prec(i)(1:ilen-1)
2021
2022	SELECT CASE ( var )
2023
2024	CASE ( 'u' )
2025	j = 1
2026	CASE ( 'v' )
2027	j = 2
2028	CASE ( 'w' )
2029	j = 3
2030	CASE ( 'p' )
2031	j = 4
2032	CASE ( 'pt' )
2033	j = 5
2034
2035	CASE DEFAULT
2036	IF ( myid == 0 ) THEN
2037	PRINT*, '+++ check_parameters: unknown variable in ', &
2038	'assignment'
2039	PRINT*, ' do3d_comp_prec(', i, ')="', &
2040	TRIM( do3d_comp_prec(i) ),'"'
2041	ENDIF
2042	CALL local_stop
2043
2044	END SELECT
2045
2046	plot_3d_precision(j)%precision = prec
2047	i = i + 1
2048
2049	ENDDO
2050	ENDIF
2051
2052	!
2053	!-- Check the data output format(s)
2054	IF ( data_output_format(1) == ' ' ) THEN
2055	!
2056	!-- Default value
2057	netcdf_output = .TRUE.
2058	ELSE
2059	i = 1
2060	DO WHILE ( data_output_format(i) /= ' ' )
2061
2062	SELECT CASE ( data_output_format(i) )
2063
2064	CASE ( 'netcdf' )
2065	netcdf_output = .TRUE.
2066	CASE ( 'iso2d' )
2067	iso2d_output = .TRUE.
2068	CASE ( 'profil' )
2069	profil_output = .TRUE.
2070	CASE ( 'avs' )
2071	avs_output = .TRUE.
2072
2073	CASE DEFAULT
2074	IF ( myid == 0 ) THEN
2075	PRINT*, '+++ check_parameters:'
2076	PRINT*, ' unknown value for data_output_format "', &
2077	TRIM( data_output_format(i) ),'"'
2078	ENDIF
2079	CALL local_stop
2080
2081	END SELECT
2082
2083	i = i + 1
2084	IF ( i > 10 ) EXIT
2085
2086	ENDDO
2087
2088	ENDIF
2089
2090	!
2091	!-- Check netcdf precison
2092	ldum = .FALSE.
2093	CALL define_netcdf_header( 'ch', ldum, 0 )
2094
2095	!
2096	!-- Check, whether a constant diffusion coefficient shall be used
2097	IF ( km_constant /= -1.0 ) THEN
2098	IF ( km_constant < 0.0 ) THEN
2099	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2100	km_constant, ' < 0.0'
2101	CALL local_stop
2102	ELSE
2103	IF ( prandtl_number < 0.0 ) THEN
2104	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2105	prandtl_number, ' < 0.0'
2106	CALL local_stop
2107	ENDIF
2108	constant_diffusion = .TRUE.
2109
2110	IF ( prandtl_layer ) THEN
2111	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2112	'is not allowed with fixed value of km'
2113	CALL local_stop
2114	ENDIF
2115	ENDIF
2116	ENDIF
2117
2118	!
2119	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2120	!-- for the horizontal diffusivity used within the outflow damping layer,
2121	!-- and check/set the width of the damping layer
2122	IF ( bc_lr /= 'cyclic' ) THEN
2123	IF ( km_damp_max == -1.0 ) THEN
2124	km_damp_max = 0.5 * dx
2125	ENDIF
2126	IF ( outflow_damping_width == -1.0 ) THEN
2127	outflow_damping_width = MIN( 20, nx/2 )
2128	ENDIF
2129	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2130	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2131	'idth out of range'
2132	CALL local_stop
2133	ENDIF
2134	ENDIF
2135
2136	IF ( bc_ns /= 'cyclic' ) THEN
2137	IF ( km_damp_max == -1.0 ) THEN
2138	km_damp_max = 0.5 * dy
2139	ENDIF
2140	IF ( outflow_damping_width == -1.0 ) THEN
2141	outflow_damping_width = MIN( 20, ny/2 )
2142	ENDIF
2143	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2144	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2145	'idth out of range'
2146	CALL local_stop
2147	ENDIF
2148	ENDIF
2149
2150	!
2151	!-- Check value range for rif
2152	IF ( rif_min >= rif_max ) THEN
2153	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2154	' must be less than rif_max=', rif_max
2155	CALL local_stop
2156	ENDIF
2157
2158	!
2159	!-- Determine upper and lower hight level indices for random perturbations
2160	IF ( disturbance_level_b == -1.0 ) THEN
2161	disturbance_level_b = zu(nzb+3)
2162	disturbance_level_ind_b = nzb + 3
2163	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2164	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2165	disturbance_level_b, ' must be >= ',zu(3), &
2166	'(zu(3))'
2167	CALL local_stop
2168	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2169	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2170	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2171	'(zu(nzt-2))'
2172	CALL local_stop
2173	ELSE
2174	DO k = 3, nzt-2
2175	IF ( disturbance_level_b <= zu(k) ) THEN
2176	disturbance_level_ind_b = k
2177	EXIT
2178	ENDIF
2179	ENDDO
2180	ENDIF
2181
2182	IF ( disturbance_level_t == -1.0 ) THEN
2183	disturbance_level_t = zu(nzt/3)
2184	disturbance_level_ind_t = nzt / 3
2185	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2186	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2187	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2188	'(zu(nzt-2))'
2189	CALL local_stop
2190	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2191	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2192	disturbance_level_t, ' must be >= ', &
2193	'disturbance_level_b=', disturbance_level_b
2194	CALL local_stop
2195	ELSE
2196	DO k = 3, nzt-2
2197	IF ( disturbance_level_t <= zu(k) ) THEN
2198	disturbance_level_ind_t = k
2199	EXIT
2200	ENDIF
2201	ENDDO
2202	ENDIF
2203
2204	!
2205	!-- Check again whether the levels determined this way are ok.
2206	!-- Error may occur at automatic determination and too few grid points in
2207	!-- z-direction.
2208	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2209	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2210	'disturbance_level_ind_t=', &
2211	disturbance_level_ind_t, ' must be >= ', &
2212	'disturbance_level_ind_b=', &
2213	disturbance_level_ind_b
2214	CALL local_stop
2215	ENDIF
2216
2217	!
2218	!-- Determine the horizontal index range for random perturbations.
2219	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2220	!-- near the inflow and the perturbation area is further limited to ...(1)
2221	!-- after the initial phase of the flow.
2222	dist_nxl = 0; dist_nxr = nx
2223	dist_nys = 0; dist_nyn = ny
2224	IF ( bc_lr /= 'cyclic' ) THEN
2225	IF ( inflow_disturbance_begin == -1 ) THEN
2226	inflow_disturbance_begin = MIN( 10, nx/2 )
2227	ENDIF
2228	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2229	THEN
2230	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2231	'_begin out of range'
2232	CALL local_stop
2233	ENDIF
2234	IF ( inflow_disturbance_end == -1 ) THEN
2235	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2236	ENDIF
2237	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2238	THEN
2239	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2240	'_end out of range'
2241	CALL local_stop
2242	ENDIF
2243	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2244	IF ( inflow_disturbance_begin == -1 ) THEN
2245	inflow_disturbance_begin = MIN( 10, ny/2 )
2246	ENDIF
2247	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2248	THEN
2249	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2250	'_begin out of range'
2251	CALL local_stop
2252	ENDIF
2253	IF ( inflow_disturbance_end == -1 ) THEN
2254	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2255	ENDIF
2256	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2257	THEN
2258	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2259	'_end out of range'
2260	CALL local_stop
2261	ENDIF
2262	ENDIF
2263
2264	IF ( outflow_l ) THEN
2265	dist_nxr = nx - inflow_disturbance_begin
2266	dist_nxl(1) = nx - inflow_disturbance_end
2267	ELSEIF ( outflow_r ) THEN
2268	dist_nxl = inflow_disturbance_begin
2269	dist_nxr(1) = inflow_disturbance_end
2270	ELSEIF ( outflow_s ) THEN
2271	dist_nyn = ny - inflow_disturbance_begin
2272	dist_nys(1) = ny - inflow_disturbance_end
2273	ELSEIF ( outflow_n ) THEN
2274	dist_nys = inflow_disturbance_begin
2275	dist_nyn(1) = inflow_disturbance_end
2276	ENDIF
2277
2278	!
2279	!-- Check random generator
2280	IF ( random_generator /= 'system-specific' .AND. &
2281	random_generator /= 'numerical-recipes' ) THEN
2282	IF ( myid == 0 ) THEN
2283	PRINT*, '+++ check_parameters:'
2284	PRINT*, ' unknown random generator: random_generator=', &
2285	random_generator
2286	ENDIF
2287	CALL local_stop
2288	ENDIF
2289
2290	!
2291	!-- Determine damping level index for 1D model
2292	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2293	IF ( damp_level_1d == -1.0 ) THEN
2294	damp_level_1d = zu(nzt+1)
2295	damp_level_ind_1d = nzt + 1
2296	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2297	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
2298	damp_level_1d, ' must be > 0.0 and < ', &
2299	'zu(nzt+1)', zu(nzt+1)
2300	CALL local_stop
2301	ELSE
2302	DO k = 1, nzt+1
2303	IF ( damp_level_1d <= zu(k) ) THEN
2304	damp_level_ind_1d = k
2305	EXIT
2306	ENDIF
2307	ENDDO
2308	ENDIF
2309	ENDIF
2310	!
2311	!-- Check some other 1d-model parameters
2312	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2313	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2314	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
2315	TRIM( mixing_length_1d ), '" is unknown'
2316	CALL local_stop
2317	ENDIF
2318	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2319	TRIM( dissipation_1d ) /= 'detering' ) THEN
2320	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
2321	TRIM( dissipation_1d ), '" is unknown'
2322	CALL local_stop
2323	ENDIF
2324
2325	!
2326	!-- Set time for the next user defined restart (time_restart is the
2327	!-- internal parameter for steering restart events)
2328	IF ( restart_time /= 9999999.9 ) THEN
2329	IF ( restart_time > simulated_time ) time_restart = restart_time
2330	ELSE
2331	!
2332	!-- In case of a restart run, set internal parameter to default (no restart)
2333	!-- if the NAMELIST-parameter restart_time is omitted
2334	time_restart = 9999999.9
2335	ENDIF
2336
2337	!
2338	!-- Set default value of the time needed to terminate a model run
2339	IF ( termination_time_needed == -1.0 ) THEN
2340	IF ( host(1:3) == 'ibm' ) THEN
2341	termination_time_needed = 300.0
2342	ELSE
2343	termination_time_needed = 35.0
2344	ENDIF
2345	ENDIF
2346
2347	!
2348	!-- Check the time needed to terminate a model run
2349	IF ( host(1:3) == 't3e' ) THEN
2350	!
2351	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2352	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2353	IF ( termination_time_needed <= 30.0 ) THEN
2354	IF ( myid == 0 ) THEN
2355	PRINT*, '+++ check_parameters: termination_time_needed', &
2356	termination_time_needed
2357	PRINT*, ' must be > 30.0 on host "', host, &
2358	'"'
2359	ENDIF
2360	CALL local_stop
2361	ENDIF
2362	ELSEIF ( host(1:3) == 'ibm' ) THEN
2363	!
2364	!-- On IBM-regatta machines the time should be at least 300 seconds,
2365	!-- because the job time consumed before executing palm (for compiling,
2366	!-- copying of files, etc.) has to be regarded
2367	IF ( termination_time_needed < 300.0 ) THEN
2368	IF ( myid == 0 ) THEN
2369	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
2370	'needed', termination_time_needed
2371	PRINT*, ' should be >= 300.0', &
2372	' on host "', host, '"'
2373	ENDIF
2374	ENDIF
2375	ENDIF
2376
2377
2378	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |