Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1752

Last change on this file since 1752 was 1746, checked in by gronemeier, 9 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 181.8 KB

Line
1	!> @file check_parameters.f90
2	!--------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the terms
6	! of the GNU General Public License as published by the Free Software Foundation,
7	! either version 3 of the License, or (at your option) any later version.
8	!
9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
10	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
11	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
12	!
13	! You should have received a copy of the GNU General Public License along with
14	! PALM. If not, see <http://www.gnu.org/licenses/>.
15	!
16	! Copyright 1997-2015 Leibniz Universitaet Hannover
17	!--------------------------------------------------------------------------------!
18	!
19	! Current revisions:
20	! -----------------
21	!
22	!
23	! Former revisions:
24	! -----------------
25	! $Id: check_parameters.f90 1746 2016-02-05 13:19:50Z maronga $
26	!
27	! 1745 2016-02-05 13:06:51Z gronemeier
28	! Bugfix: check data output intervals to be /= 0.0 in case of parallel NetCDF4
29	!
30	! 1701 2015-11-02 07:43:04Z maronga
31	! Bugfix: definition of rad_net timeseries was missing
32	!
33	! 1691 2015-10-26 16:17:44Z maronga
34	! Added output of Obukhov length (ol) and radiative heating rates for RRTMG.
35	! Added checks for use of radiation / lsm with topography.
36	!
37	! 1682 2015-10-07 23:56:08Z knoop
38	! Code annotations made doxygen readable
39	!
40	! 1606 2015-06-29 10:43:37Z maronga
41	! Added check for use of RRTMG without netCDF.
42	!
43	! 1587 2015-05-04 14:19:01Z maronga
44	! Added check for set of albedos when using RRTMG
45	!
46	! 1585 2015-04-30 07:05:52Z maronga
47	! Added support for RRTMG
48	!
49	! 1575 2015-03-27 09:56:27Z raasch
50	! multigrid_fast added as allowed pressure solver
51	!
52	! 1573 2015-03-23 17:53:37Z suehring
53	! Bugfix: check for advection schemes in case of non-cyclic boundary conditions
54	!
55	! 1557 2015-03-05 16:43:04Z suehring
56	! Added checks for monotonic limiter
57	!
58	! 1555 2015-03-04 17:44:27Z maronga
59	! Added output of r_a and r_s. Renumbering of LSM PA-messages.
60	!
61	! 1553 2015-03-03 17:33:54Z maronga
62	! Removed check for missing soil temperature profile as default values were added.
63	!
64	! 1551 2015-03-03 14:18:16Z maronga
65	! Added various checks for land surface and radiation model. In the course of this
66	! action, the length of the variable var has to be increased
67	!
68	! 1504 2014-12-04 09:23:49Z maronga
69	! Bugfix: check for large_scale forcing got lost.
70	!
71	! 1500 2014-12-03 17:42:41Z maronga
72	! Boundary conditions changed to dirichlet for land surface model
73	!
74	! 1496 2014-12-02 17:25:50Z maronga
75	! Added checks for the land surface model
76	!
77	! 1484 2014-10-21 10:53:05Z kanani
78	! Changes due to new module structure of the plant canopy model:
79	! module plant_canopy_model_mod added,
80	! checks regarding usage of new method for leaf area density profile
81	! construction added,
82	! lad-profile construction moved to new subroutine init_plant_canopy within
83	! the module plant_canopy_model_mod,
84	! drag_coefficient renamed to canopy_drag_coeff.
85	! Missing KIND-attribute for REAL constant added
86	!
87	! 1455 2014-08-29 10:47:47Z heinze
88	! empty time records in volume, cross-section and masked data output prevented
89	! in case of non-parallel netcdf-output in restart runs
90	!
91	! 1429 2014-07-15 12:53:45Z knoop
92	! run_description_header exended to provide ensemble_member_nr if specified
93	!
94	! 1425 2014-07-05 10:57:53Z knoop
95	! bugfix: perturbation domain modified for parallel random number generator
96	!
97	! 1402 2014-05-09 14:25:13Z raasch
98	! location messages modified
99	!
100	! 1400 2014-05-09 14:03:54Z knoop
101	! Check random generator extended by option random-parallel
102	!
103	! 1384 2014-05-02 14:31:06Z raasch
104	! location messages added
105	!
106	! 1365 2014-04-22 15:03:56Z boeske
107	! Usage of large scale forcing for pt and q enabled:
108	! output for profiles of large scale advection (td_lsa_lpt, td_lsa_q),
109	! large scale subsidence (td_sub_lpt, td_sub_q)
110	! and nudging tendencies (td_nud_lpt, td_nud_q, td_nud_u and td_nud_v) added,
111	! check if use_subsidence_tendencies is used correctly
112	!
113	! 1361 2014-04-16 15:17:48Z hoffmann
114	! PA0363 removed
115	! PA0362 changed
116	!
117	! 1359 2014-04-11 17:15:14Z hoffmann
118	! Do not allow the execution of PALM with use_particle_tails, since particle
119	! tails are currently not supported by our new particle structure.
120	!
121	! PA0084 not necessary for new particle structure
122	!
123	! 1353 2014-04-08 15:21:23Z heinze
124	! REAL constants provided with KIND-attribute
125	!
126	! 1330 2014-03-24 17:29:32Z suehring
127	! In case of SGS-particle velocity advection of TKE is also allowed with
128	! dissipative 5th-order scheme.
129	!
130	! 1327 2014-03-21 11:00:16Z raasch
131	! "baroclinicity" renamed "baroclinity", "ocean version" replaced by "ocean mode"
132	! bugfix: duplicate error message 56 removed,
133	! check of data_output_format and do3d_compress removed
134	!
135	! 1322 2014-03-20 16:38:49Z raasch
136	! some REAL constants defined as wp-kind
137	!
138	! 1320 2014-03-20 08:40:49Z raasch
139	! Kind-parameters added to all INTEGER and REAL declaration statements,
140	! kinds are defined in new module kinds,
141	! revision history before 2012 removed,
142	! comment fields (!:) to be used for variable explanations added to
143	! all variable declaration statements
144	!
145	! 1308 2014-03-13 14:58:42Z fricke
146	! +netcdf_data_format_save
147	! Calculate fixed number of output time levels for parallel netcdf output.
148	! For masked data, parallel netcdf output is not tested so far, hence
149	! netcdf_data_format is switched back to non-paralell output.
150	!
151	! 1299 2014-03-06 13:15:21Z heinze
152	! enable usage of large_scale subsidence in combination with large_scale_forcing
153	! output for profile of large scale vertical velocity w_subs added
154	!
155	! 1276 2014-01-15 13:40:41Z heinze
156	! Use LSF_DATA also in case of Dirichlet bottom boundary condition for scalars
157	!
158	! 1241 2013-10-30 11:36:58Z heinze
159	! output for profiles of ug and vg added
160	! set surface_heatflux and surface_waterflux also in dependence on
161	! large_scale_forcing
162	! checks for nudging and large scale forcing from external file
163	!
164	! 1236 2013-09-27 07:21:13Z raasch
165	! check number of spectra levels
166	!
167	! 1216 2013-08-26 09:31:42Z raasch
168	! check for transpose_compute_overlap (temporary)
169	!
170	! 1214 2013-08-21 12:29:17Z kanani
171	! additional check for simultaneous use of vertical grid stretching
172	! and particle advection
173	!
174	! 1212 2013-08-15 08:46:27Z raasch
175	! checks for poisfft_hybrid removed
176	!
177	! 1210 2013-08-14 10:58:20Z raasch
178	! check for fftw
179	!
180	! 1179 2013-06-14 05:57:58Z raasch
181	! checks and settings of buoyancy parameters and switches revised,
182	! initial profile for rho added to hom (id=77)
183	!
184	! 1174 2013-05-31 10:28:08Z gryschka
185	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
186	!
187	! 1159 2013-05-21 11:58:22Z fricke
188	! bc_lr/ns_dirneu/neudir removed
189	!
190	! 1115 2013-03-26 18:16:16Z hoffmann
191	! unused variables removed
192	! drizzle can be used without precipitation
193	!
194	! 1111 2013-03-08 23:54:10Z raasch
195	! ibc_p_b = 2 removed
196	!
197	! 1103 2013-02-20 02:15:53Z raasch
198	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
199	!
200	! 1092 2013-02-02 11:24:22Z raasch
201	! unused variables removed
202	!
203	! 1069 2012-11-28 16:18:43Z maronga
204	! allow usage of topography in combination with cloud physics
205	!
206	! 1065 2012-11-22 17:42:36Z hoffmann
207	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
208	! precipitation in order to save computational resources.
209	!
210	! 1060 2012-11-21 07:19:51Z raasch
211	! additional check for parameter turbulent_inflow
212	!
213	! 1053 2012-11-13 17:11:03Z hoffmann
214	! necessary changes for the new two-moment cloud physics scheme added:
215	! - check cloud physics scheme (Kessler or Seifert and Beheng)
216	! - plant_canopy is not allowed
217	! - currently, only cache loop_optimization is allowed
218	! - initial profiles of nr, qr
219	! - boundary condition of nr, qr
220	! - check output quantities (qr, nr, prr)
221	!
222	! 1036 2012-10-22 13:43:42Z raasch
223	! code put under GPL (PALM 3.9)
224	!
225	! 1031/1034 2012-10-22 11:32:49Z raasch
226	! check of netcdf4 parallel file support
227	!
228	! 1019 2012-09-28 06:46:45Z raasch
229	! non-optimized version of prognostic_equations not allowed any more
230	!
231	! 1015 2012-09-27 09:23:24Z raasch
232	! acc allowed for loop optimization,
233	! checks for adjustment of mixing length to the Prandtl mixing length removed
234	!
235	! 1003 2012-09-14 14:35:53Z raasch
236	! checks for cases with unequal subdomain sizes removed
237	!
238	! 1001 2012-09-13 14:08:46Z raasch
239	! all actions concerning leapfrog- and upstream-spline-scheme removed
240	!
241	! 996 2012-09-07 10:41:47Z raasch
242	! little reformatting
243
244	! 978 2012-08-09 08:28:32Z fricke
245	! setting of bc_lr/ns_dirneu/neudir
246	! outflow damping layer removed
247	! check for z0h*
248	! check for pt_damping_width
249	!
250	! 964 2012-07-26 09:14:24Z raasch
251	! check of old profil-parameters removed
252	!
253	! 940 2012-07-09 14:31:00Z raasch
254	! checks for parameter neutral
255	!
256	! 924 2012-06-06 07:44:41Z maronga
257	! Bugfix: preprocessor directives caused error during compilation
258	!
259	! 892 2012-05-02 13:51:44Z maronga
260	! Bugfix for parameter file check ( excluding __netcdf4 )
261	!
262	! 866 2012-03-28 06:44:41Z raasch
263	! use only 60% of the geostrophic wind as translation speed in case of Galilean
264	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
265	! timestep
266	!
267	! 861 2012-03-26 14:18:34Z suehring
268	! Check for topography and ws-scheme removed.
269	! Check for loop_optimization = 'vector' and ws-scheme removed.
270	!
271	! 845 2012-03-07 10:23:05Z maronga
272	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
273	!
274	! 828 2012-02-21 12:00:36Z raasch
275	! check of collision_kernel extended
276	!
277	! 825 2012-02-19 03:03:44Z raasch
278	! check for collision_kernel and curvature_solution_effects
279	!
280	! 809 2012-01-30 13:32:58Z maronga
281	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
282	!
283	! 807 2012-01-25 11:53:51Z maronga
284	! New cpp directive "__check" implemented which is used by check_namelist_files
285	!
286	! Revision 1.1 1997/08/26 06:29:23 raasch
287	! Initial revision
288	!
289	!
290	! Description:
291	! ------------
292	!> Check control parameters and deduce further quantities.
293	!------------------------------------------------------------------------------!
294	SUBROUTINE check_parameters
295
296
297	USE arrays_3d
298	USE cloud_parameters
299	USE constants
300	USE control_parameters
301	USE dvrp_variables
302	USE grid_variables
303	USE indices
304	USE land_surface_model_mod
305	USE kinds
306	USE model_1d
307	USE netcdf_control
308	USE particle_attributes
309	USE pegrid
310	USE plant_canopy_model_mod
311	USE profil_parameter
312	USE radiation_model_mod
313	USE spectrum
314	USE statistics
315	USE subsidence_mod
316	USE statistics
317	USE transpose_indices
318
319
320	IMPLICIT NONE
321
322	CHARACTER (LEN=1) :: sq !<
323	CHARACTER (LEN=15) :: var !<
324	CHARACTER (LEN=7) :: unit !<
325	CHARACTER (LEN=8) :: date !<
326	CHARACTER (LEN=10) :: time !<
327	CHARACTER (LEN=40) :: coupling_string !<
328	CHARACTER (LEN=100) :: action !<
329
330	INTEGER(iwp) :: i !<
331	INTEGER(iwp) :: ilen !<
332	INTEGER(iwp) :: iremote = 0 !<
333	INTEGER(iwp) :: j !<
334	INTEGER(iwp) :: k !<
335	INTEGER(iwp) :: kk !<
336	INTEGER(iwp) :: netcdf_data_format_save !<
337	INTEGER(iwp) :: position !<
338	INTEGER(iwp) :: prec !<
339
340	LOGICAL :: found !<
341	LOGICAL :: ldum !<
342
343	REAL(wp) :: gradient !<
344	REAL(wp) :: remote = 0.0_wp !<
345	REAL(wp) :: simulation_time_since_reference !<
346
347
348	CALL location_message( 'checking parameters', .FALSE. )
349
350	!
351	!-- Check for overlap combinations, which are not realized yet
352	IF ( transpose_compute_overlap ) THEN
353	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
354	#if defined( __openacc )
355	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
356	#endif
357	ENDIF
358
359	!
360	!-- Warning, if host is not set
361	IF ( host(1:1) == ' ' ) THEN
362	message_string = '"host" is not set. Please check that environment ' // &
363	'variable "localhost" & is set before running PALM'
364	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
365	ENDIF
366
367	!
368	!-- Check the coupling mode
369	IF ( coupling_mode /= 'uncoupled' .AND. &
370	coupling_mode /= 'atmosphere_to_ocean' .AND. &
371	coupling_mode /= 'ocean_to_atmosphere' ) THEN
372	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
373	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
374	ENDIF
375
376	!
377	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
378	IF ( coupling_mode /= 'uncoupled') THEN
379
380	IF ( dt_coupling == 9999999.9_wp ) THEN
381	message_string = 'dt_coupling is not set but required for coup' // &
382	'ling mode "' // TRIM( coupling_mode ) // '"'
383	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
384	ENDIF
385
386	#if defined( __parallel )
387
388	!
389	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
390	!-- program.
391	!-- check_namelist_files will need the following information of the other
392	!-- model (atmosphere/ocean).
393	! dt_coupling = remote
394	! dt_max = remote
395	! restart_time = remote
396	! dt_restart= remote
397	! simulation_time_since_reference = remote
398	! dx = remote
399
400
401	#if ! defined( __check )
402	IF ( myid == 0 ) THEN
403	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
404	ierr )
405	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
406	status, ierr )
407	ENDIF
408	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
409	#endif
410	IF ( dt_coupling /= remote ) THEN
411	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
412	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
413	'dt_coupling_remote = ', remote
414	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
415	ENDIF
416	IF ( dt_coupling <= 0.0_wp ) THEN
417	#if ! defined( __check )
418	IF ( myid == 0 ) THEN
419	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
420	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
421	status, ierr )
422	ENDIF
423	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
424	#endif
425	dt_coupling = MAX( dt_max, remote )
426	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
427	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
428	'MAX(dt_max(A,O)) = ', dt_coupling
429	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
430	ENDIF
431	#if ! defined( __check )
432	IF ( myid == 0 ) THEN
433	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
434	ierr )
435	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
436	status, ierr )
437	ENDIF
438	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
439	#endif
440	IF ( restart_time /= remote ) THEN
441	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
442	'": restart_time = ', restart_time, '& is not equal to ', &
443	'restart_time_remote = ', remote
444	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
445	ENDIF
446	#if ! defined( __check )
447	IF ( myid == 0 ) THEN
448	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
449	ierr )
450	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
451	status, ierr )
452	ENDIF
453	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
454	#endif
455	IF ( dt_restart /= remote ) THEN
456	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
457	'": dt_restart = ', dt_restart, '& is not equal to ', &
458	'dt_restart_remote = ', remote
459	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
460	ENDIF
461
462	simulation_time_since_reference = end_time - coupling_start_time
463	#if ! defined( __check )
464	IF ( myid == 0 ) THEN
465	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
466	14, comm_inter, ierr )
467	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
468	status, ierr )
469	ENDIF
470	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
471	#endif
472	IF ( simulation_time_since_reference /= remote ) THEN
473	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
474	'": simulation_time_since_reference = ', &
475	simulation_time_since_reference, '& is not equal to ', &
476	'simulation_time_since_reference_remote = ', remote
477	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
478	ENDIF
479
480	#if ! defined( __check )
481	IF ( myid == 0 ) THEN
482	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
483	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
484	status, ierr )
485	ENDIF
486	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
487
488	#endif
489	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
490
491	IF ( dx < remote ) THEN
492	WRITE( message_string, * ) 'coupling mode "', &
493	TRIM( coupling_mode ), &
494	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
495	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
496	ENDIF
497
498	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
499	WRITE( message_string, * ) 'coupling mode "', &
500	TRIM( coupling_mode ), &
501	'": Domain size in x-direction is not equal in ocean and atmosphere'
502	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
503	ENDIF
504
505	ENDIF
506
507	#if ! defined( __check )
508	IF ( myid == 0) THEN
509	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
510	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
511	status, ierr )
512	ENDIF
513	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
514	#endif
515	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
516
517	IF ( dy < remote ) THEN
518	WRITE( message_string, * ) 'coupling mode "', &
519	TRIM( coupling_mode ), &
520	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
521	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
522	ENDIF
523
524	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
525	WRITE( message_string, * ) 'coupling mode "', &
526	TRIM( coupling_mode ), &
527	'": Domain size in y-direction is not equal in ocean and atmosphere'
528	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
529	ENDIF
530
531	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
532	WRITE( message_string, * ) 'coupling mode "', &
533	TRIM( coupling_mode ), &
534	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
535	' atmosphere'
536	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
537	ENDIF
538
539	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
540	WRITE( message_string, * ) 'coupling mode "', &
541	TRIM( coupling_mode ), &
542	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
543	' atmosphere'
544	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
545	ENDIF
546
547	ENDIF
548	#else
549	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
550	' ''mrun -K parallel'''
551	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
552	#endif
553	ENDIF
554
555	#if defined( __parallel ) && ! defined ( __check )
556	!
557	!-- Exchange via intercommunicator
558	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
559	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
560	ierr )
561	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
562	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
563	comm_inter, status, ierr )
564	ENDIF
565	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
566
567	#endif
568
569
570	!
571	!-- Generate the file header which is used as a header for most of PALM's
572	!-- output files
573	CALL DATE_AND_TIME( date, time )
574	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
575	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
576	IF ( coupling_mode == 'uncoupled' ) THEN
577	coupling_string = ''
578	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
579	coupling_string = ' coupled (atmosphere)'
580	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
581	coupling_string = ' coupled (ocean)'
582	ENDIF
583
584	IF ( ensemble_member_nr /= 0 ) THEN
585	WRITE ( run_description_header, &
586	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,I2.2,2X,A,A,2X,A,1X,A)' ) &
587	TRIM( version ), TRIM( revision ), 'run: ', &
588	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
589	'en-no: ', ensemble_member_nr,'host: ', TRIM( host ), &
590	run_date, run_time
591	ELSE
592	WRITE ( run_description_header, &
593	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
594	TRIM( version ), TRIM( revision ), 'run: ', &
595	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
596	'host: ', TRIM( host ), run_date, run_time
597	ENDIF
598	!
599	!-- Check the general loop optimization method
600	IF ( loop_optimization == 'default' ) THEN
601	IF ( host(1:3) == 'nec' ) THEN
602	loop_optimization = 'vector'
603	ELSE
604	loop_optimization = 'cache'
605	ENDIF
606	ENDIF
607
608	SELECT CASE ( TRIM( loop_optimization ) )
609
610	CASE ( 'acc', 'cache', 'vector' )
611	CONTINUE
612
613	CASE DEFAULT
614	message_string = 'illegal value given for loop_optimization: "' // &
615	TRIM( loop_optimization ) // '"'
616	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
617
618	END SELECT
619
620	!
621	!-- Check if vertical grid stretching is used together with particles
622	IF ( dz_stretch_level < 100000.0_wp .AND. particle_advection ) THEN
623	message_string = 'Vertical grid stretching is not allowed together ' // &
624	'with particle advection.'
625	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
626	ENDIF
627
628	!
629	!--
630	IF ( use_particle_tails ) THEN
631	message_string = 'Particle tails are currently not available due ' // &
632	'to the new particle structure.'
633	CALL message( 'check_parameters', 'PA0392', 1, 2, 0, 6, 0 )
634	ENDIF
635
636	!
637	!-- Check topography setting (check for illegal parameter combinations)
638	IF ( topography /= 'flat' ) THEN
639	action = ' '
640	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' &
641	.AND. scalar_advec /= 'ws-scheme-mono' ) THEN
642	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
643	ENDIF
644	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
645	THEN
646	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
647	ENDIF
648	IF ( psolver == 'sor' ) THEN
649	WRITE( action, '(A,A)' ) 'psolver = ', psolver
650	ENDIF
651	IF ( sloping_surface ) THEN
652	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
653	ENDIF
654	IF ( galilei_transformation ) THEN
655	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
656	ENDIF
657	IF ( cloud_physics ) THEN
658	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
659	ENDIF
660	IF ( cloud_droplets ) THEN
661	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
662	ENDIF
663	IF ( .NOT. constant_flux_layer ) THEN
664	WRITE( action, '(A)' ) 'constant_flux_layer = .FALSE.'
665	ENDIF
666	IF ( action /= ' ' ) THEN
667	message_string = 'a non-flat topography does not allow ' // &
668	TRIM( action )
669	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
670	ENDIF
671	!
672	!-- In case of non-flat topography, check whether the convention how to
673	!-- define the topography grid has been set correctly, or whether the default
674	!-- is applicable. If this is not possible, abort.
675	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
676	IF ( TRIM( topography ) /= 'single_building' .AND. &
677	TRIM( topography ) /= 'single_street_canyon' .AND. &
678	TRIM( topography ) /= 'read_from_file' ) THEN
679	!-- The default value is not applicable here, because it is only valid
680	!-- for the two standard cases 'single_building' and 'read_from_file'
681	!-- defined in init_grid.
682	WRITE( message_string, * ) &
683	'The value for "topography_grid_convention" ', &
684	'is not set. Its default value is & only valid for ', &
685	'"topography" = ''single_building'', ', &
686	'''single_street_canyon'' & or ''read_from_file''.', &
687	' & Choose ''cell_edge'' or ''cell_center''.'
688	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
689	ELSE
690	!-- The default value is applicable here.
691	!-- Set convention according to topography.
692	IF ( TRIM( topography ) == 'single_building' .OR. &
693	TRIM( topography ) == 'single_street_canyon' ) THEN
694	topography_grid_convention = 'cell_edge'
695	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
696	topography_grid_convention = 'cell_center'
697	ENDIF
698	ENDIF
699	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
700	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
701	WRITE( message_string, * ) &
702	'The value for "topography_grid_convention" is ', &
703	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
704	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
705	ENDIF
706
707	ENDIF
708
709	!
710	!-- Check ocean setting
711	IF ( ocean ) THEN
712
713	action = ' '
714	IF ( action /= ' ' ) THEN
715	message_string = 'ocean = .T. does not allow ' // TRIM( action )
716	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
717	ENDIF
718
719	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
720	TRIM( coupling_char ) == '_O' ) THEN
721
722	!
723	!-- Check whether an (uncoupled) atmospheric run has been declared as an
724	!-- ocean run (this setting is done via mrun-option -y)
725
726	message_string = 'ocean = .F. does not allow coupling_char = "' // &
727	TRIM( coupling_char ) // '" set by mrun-option "-y"'
728	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
729
730	ENDIF
731	!
732	!-- Check cloud scheme
733	IF ( cloud_scheme == 'seifert_beheng' ) THEN
734	icloud_scheme = 0
735	ELSEIF ( cloud_scheme == 'kessler' ) THEN
736	icloud_scheme = 1
737	ELSE
738	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
739	TRIM( cloud_scheme ) // '"'
740	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
741	ENDIF
742	!
743	!-- Check whether there are any illegal values
744	!-- Pressure solver:
745	IF ( psolver /= 'poisfft' .AND. psolver /= 'sor' .AND. &
746	psolver /= 'multigrid' .AND. psolver /= 'multigrid_fast' ) THEN
747	message_string = 'unknown solver for perturbation pressure: psolver' // &
748	' = "' // TRIM( psolver ) // '"'
749	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
750	ENDIF
751
752	IF ( psolver(1:9) == 'multigrid' ) THEN
753	IF ( cycle_mg == 'w' ) THEN
754	gamma_mg = 2
755	ELSEIF ( cycle_mg == 'v' ) THEN
756	gamma_mg = 1
757	ELSE
758	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
759	TRIM( cycle_mg ) // '"'
760	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
761	ENDIF
762	ENDIF
763
764	IF ( fft_method /= 'singleton-algorithm' .AND. &
765	fft_method /= 'temperton-algorithm' .AND. &
766	fft_method /= 'fftw' .AND. &
767	fft_method /= 'system-specific' ) THEN
768	message_string = 'unknown fft-algorithm: fft_method = "' // &
769	TRIM( fft_method ) // '"'
770	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
771	ENDIF
772
773	IF( momentum_advec == 'ws-scheme' .AND. &
774	.NOT. call_psolver_at_all_substeps ) THEN
775	message_string = 'psolver must be called at each RK3 substep when "'//&
776	TRIM(momentum_advec) // ' "is used for momentum_advec'
777	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
778	END IF
779	!
780	!-- Advection schemes:
781	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
782	THEN
783	message_string = 'unknown advection scheme: momentum_advec = "' // &
784	TRIM( momentum_advec ) // '"'
785	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
786	ENDIF
787	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' &
788	.OR. scalar_advec == 'ws-scheme-mono' ) &
789	.AND. ( timestep_scheme == 'euler' .OR. &
790	timestep_scheme == 'runge-kutta-2' ) ) &
791	THEN
792	message_string = 'momentum_advec or scalar_advec = "' &
793	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
794	TRIM( timestep_scheme ) // '"'
795	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
796	ENDIF
797	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
798	scalar_advec /= 'ws-scheme-mono' .AND. scalar_advec /= 'bc-scheme' ) &
799	THEN
800	message_string = 'unknown advection scheme: scalar_advec = "' // &
801	TRIM( scalar_advec ) // '"'
802	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
803	ENDIF
804	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
805	THEN
806	message_string = 'advection_scheme scalar_advec = "' &
807	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
808	TRIM( loop_optimization ) // '"'
809	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
810	ENDIF
811
812	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke .AND. &
813	( scalar_advec /= 'ws-scheme' .OR. &
814	scalar_advec /= 'ws-scheme-mono' ) &
815	) THEN
816	use_upstream_for_tke = .TRUE.
817	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
818	'use_sgs_for_particles = .TRUE. ' // &
819	'and scalar_advec /= ws-scheme'
820	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
821	ENDIF
822
823	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
824	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
825	'curvature_solution_effects = .TRUE.'
826	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
827	ENDIF
828
829	!
830	!-- Set LOGICAL switches to enhance performance
831	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
832	IF ( scalar_advec == 'ws-scheme' .OR. &
833	scalar_advec == 'ws-scheme-mono' ) ws_scheme_sca = .TRUE.
834	IF ( scalar_advec == 'ws-scheme-mono' ) monotonic_adjustment = .TRUE.
835
836
837	!
838	!-- Timestep schemes:
839	SELECT CASE ( TRIM( timestep_scheme ) )
840
841	CASE ( 'euler' )
842	intermediate_timestep_count_max = 1
843
844	CASE ( 'runge-kutta-2' )
845	intermediate_timestep_count_max = 2
846
847	CASE ( 'runge-kutta-3' )
848	intermediate_timestep_count_max = 3
849
850	CASE DEFAULT
851	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
852	TRIM( timestep_scheme ) // '"'
853	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
854
855	END SELECT
856
857	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
858	.AND. timestep_scheme(1:5) == 'runge' ) THEN
859	message_string = 'momentum advection scheme "' // &
860	TRIM( momentum_advec ) // '" & does not work with ' // &
861	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
862	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
863	ENDIF
864
865	!
866	!-- Collision kernels:
867	SELECT CASE ( TRIM( collision_kernel ) )
868
869	CASE ( 'hall', 'hall_fast' )
870	hall_kernel = .TRUE.
871
872	CASE ( 'palm' )
873	palm_kernel = .TRUE.
874
875	CASE ( 'wang', 'wang_fast' )
876	wang_kernel = .TRUE.
877
878	CASE ( 'none' )
879
880
881	CASE DEFAULT
882	message_string = 'unknown collision kernel: collision_kernel = "' // &
883	TRIM( collision_kernel ) // '"'
884	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
885
886	END SELECT
887	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
888
889	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
890	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
891	!
892	!-- No restart run: several initialising actions are possible
893	action = initializing_actions
894	DO WHILE ( TRIM( action ) /= '' )
895	position = INDEX( action, ' ' )
896	SELECT CASE ( action(1:position-1) )
897
898	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
899	'by_user', 'initialize_vortex', 'initialize_ptanom' )
900	action = action(position+1:)
901
902	CASE DEFAULT
903	message_string = 'initializing_action = "' // &
904	TRIM( action ) // '" unkown or not allowed'
905	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
906
907	END SELECT
908	ENDDO
909	ENDIF
910
911	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
912	conserve_volume_flow ) THEN
913	message_string = 'initializing_actions = "initialize_vortex"' // &
914	' ist not allowed with conserve_volume_flow = .T.'
915	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
916	ENDIF
917
918
919	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
920	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
921	message_string = 'initializing_actions = "set_constant_profiles"' // &
922	' and "set_1d-model_profiles" are not allowed ' // &
923	'simultaneously'
924	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
925	ENDIF
926
927	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
928	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
929	message_string = 'initializing_actions = "set_constant_profiles"' // &
930	' and "by_user" are not allowed simultaneously'
931	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
932	ENDIF
933
934	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
935	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
936	message_string = 'initializing_actions = "by_user" and ' // &
937	'"set_1d-model_profiles" are not allowed simultaneously'
938	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
939	ENDIF
940
941	IF ( cloud_physics .AND. .NOT. humidity ) THEN
942	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
943	'not allowed with humidity = ', humidity
944	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
945	ENDIF
946
947	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
948	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
949	'not allowed with cloud_physics = ', cloud_physics
950	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
951	ENDIF
952
953	IF ( humidity .AND. sloping_surface ) THEN
954	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
955	'are not allowed simultaneously'
956	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
957	ENDIF
958
959	IF ( passive_scalar .AND. humidity ) THEN
960	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
961	'is not allowed simultaneously'
962	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
963	ENDIF
964
965	IF ( plant_canopy ) THEN
966
967	IF ( canopy_drag_coeff == 0.0_wp ) THEN
968	message_string = 'plant_canopy = .TRUE. requires a non-zero drag '// &
969	'coefficient & given value is canopy_drag_coeff = 0.0'
970	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
971	ENDIF
972
973	IF ( ( alpha_lad /= 9999999.9_wp .AND. beta_lad == 9999999.9_wp ) .OR.&
974	beta_lad /= 9999999.9_wp .AND. alpha_lad == 9999999.9_wp ) THEN
975	message_string = 'using the beta function for the construction ' // &
976	'of the leaf area density profile requires ' // &
977	'both alpha_lad and beta_lad to be /= 9999999.9'
978	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
979	ENDIF
980
981	IF ( calc_beta_lad_profile .AND. lai_beta == 0.0_wp ) THEN
982	message_string = 'using the beta function for the construction ' // &
983	'of the leaf area density profile requires ' // &
984	'a non-zero lai_beta, but given value is ' // &
985	'lai_beta = 0.0'
986	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
987	ENDIF
988
989	IF ( calc_beta_lad_profile .AND. lad_surface /= 0.0_wp ) THEN
990	message_string = 'simultaneous setting of alpha_lad /= 9999999.9' // &
991	'and lad_surface /= 0.0 is not possible, ' // &
992	'use either vertical gradients or the beta ' // &
993	'function for the construction of the leaf area '// &
994	'density profile'
995	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
996	ENDIF
997
998	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
999	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
1000	' seifert_beheng'
1001	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
1002	ENDIF
1003
1004	ENDIF
1005
1006
1007	IF ( land_surface ) THEN
1008
1009	!
1010	!-- Dirichlet boundary conditions are required as the surface fluxes are
1011	!-- calculated from the temperature/humidity gradients in the land surface
1012	!-- model
1013	IF ( bc_pt_b == 'neumann' .OR. bc_q_b == 'neumann' ) THEN
1014	message_string = 'lsm requires setting of'// &
1015	'bc_pt_b = "dirichlet" and '// &
1016	'bc_q_b = "dirichlet"'
1017	CALL message( 'check_parameters', 'PA0399', 1, 2, 0, 6, 0 )
1018	ENDIF
1019
1020	IF ( .NOT. constant_flux_layer ) THEN
1021	message_string = 'lsm requires '// &
1022	'constant_flux_layer = .T.'
1023	CALL message( 'check_parameters', 'PA0400', 1, 2, 0, 6, 0 )
1024	ENDIF
1025
1026	IF ( topography /= 'flat' ) THEN
1027	message_string = 'lsm cannot be used ' // &
1028	'in combination with topography /= "flat"'
1029	CALL message( 'check_parameters', 'PA0415', 1, 2, 0, 6, 0 )
1030	ENDIF
1031
1032	IF ( veg_type == 0 ) THEN
1033	IF ( SUM(root_fraction) /= 1.0_wp) THEN
1034	message_string = 'veg_type = 0 (user_defined)'// &
1035	'requires setting of root_fraction(0:3)'// &
1036	'/= 9999999.9 and SUM(root_fraction) = 1'
1037	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1038	ENDIF
1039
1040	IF ( min_canopy_resistance == 9999999.9_wp) THEN
1041	message_string = 'veg_type = 0 (user defined)'// &
1042	'requires setting of min_canopy_resistance'// &
1043	'/= 9999999.9'
1044	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1045	ENDIF
1046
1047	IF ( leaf_area_index == 9999999.9_wp) THEN
1048	message_string = 'veg_type = 0 (user_defined)'// &
1049	'requires setting of leaf_area_index'// &
1050	'/= 9999999.9'
1051	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1052	ENDIF
1053
1054	IF ( vegetation_coverage == 9999999.9_wp) THEN
1055	message_string = 'veg_type = 0 (user_defined)'// &
1056	'requires setting of vegetation_coverage'// &
1057	'/= 9999999.9'
1058	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1059	ENDIF
1060
1061	IF ( canopy_resistance_coefficient == 9999999.9_wp) THEN
1062	message_string = 'veg_type = 0 (user_defined)'// &
1063	'requires setting of'// &
1064	'canopy_resistance_coefficient /= 9999999.9'
1065	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1066	ENDIF
1067
1068	IF ( lambda_surface_stable == 9999999.9_wp) THEN
1069	message_string = 'veg_type = 0 (user_defined)'// &
1070	'requires setting of lambda_surface_stable'// &
1071	'/= 9999999.9'
1072	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1073	ENDIF
1074
1075	IF ( lambda_surface_unstable == 9999999.9_wp) THEN
1076	message_string = 'veg_type = 0 (user_defined)'// &
1077	'requires setting of lambda_surface_unstable'// &
1078	'/= 9999999.9'
1079	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1080	ENDIF
1081
1082	IF ( f_shortwave_incoming == 9999999.9_wp) THEN
1083	message_string = 'veg_type = 0 (user_defined)'// &
1084	'requires setting of f_shortwave_incoming'// &
1085	'/= 9999999.9'
1086	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1087	ENDIF
1088
1089	IF ( z0_eb == 9999999.9_wp) THEN
1090	message_string = 'veg_type = 0 (user_defined)'// &
1091	'requires setting of z0_eb'// &
1092	'/= 9999999.9'
1093	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1094	ENDIF
1095
1096	IF ( z0h_eb == 9999999.9_wp) THEN
1097	message_string = 'veg_type = 0 (user_defined)'// &
1098	'requires setting of z0h_eb'// &
1099	'/= 9999999.9'
1100	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
1101	ENDIF
1102
1103
1104	ENDIF
1105
1106	IF ( soil_type == 0 ) THEN
1107
1108	IF ( alpha_vangenuchten == 9999999.9_wp) THEN
1109	message_string = 'soil_type = 0 (user_defined)'// &
1110	'requires setting of alpha_vangenuchten'// &
1111	'/= 9999999.9'
1112	CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 )
1113	ENDIF
1114
1115	IF ( l_vangenuchten == 9999999.9_wp) THEN
1116	message_string = 'soil_type = 0 (user_defined)'// &
1117	'requires setting of l_vangenuchten'// &
1118	'/= 9999999.9'
1119	CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 )
1120	ENDIF
1121
1122	IF ( n_vangenuchten == 9999999.9_wp) THEN
1123	message_string = 'soil_type = 0 (user_defined)'// &
1124	'requires setting of n_vangenuchten'// &
1125	'/= 9999999.9'
1126	CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 )
1127	ENDIF
1128
1129	IF ( hydraulic_conductivity == 9999999.9_wp) THEN
1130	message_string = 'soil_type = 0 (user_defined)'// &
1131	'requires setting of hydraulic_conductivity'// &
1132	'/= 9999999.9'
1133	CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 )
1134	ENDIF
1135
1136	IF ( saturation_moisture == 9999999.9_wp) THEN
1137	message_string = 'soil_type = 0 (user_defined)'// &
1138	'requires setting of saturation_moisture'// &
1139	'/= 9999999.9'
1140	CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 )
1141	ENDIF
1142
1143	IF ( field_capacity == 9999999.9_wp) THEN
1144	message_string = 'soil_type = 0 (user_defined)'// &
1145	'requires setting of field_capacity'// &
1146	'/= 9999999.9'
1147	CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 )
1148	ENDIF
1149
1150	IF ( wilting_point == 9999999.9_wp) THEN
1151	message_string = 'soil_type = 0 (user_defined)'// &
1152	'requires setting of wilting_point'// &
1153	'/= 9999999.9'
1154	CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 )
1155	ENDIF
1156
1157	IF ( residual_moisture == 9999999.9_wp) THEN
1158	message_string = 'soil_type = 0 (user_defined)'// &
1159	'requires setting of residual_moisture'// &
1160	'/= 9999999.9'
1161	CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 )
1162	ENDIF
1163
1164	ENDIF
1165
1166	IF ( .NOT. radiation ) THEN
1167	message_string = 'lsm requires '// &
1168	'radiation = .T.'
1169	CALL message( 'check_parameters', 'PA0400', 1, 2, 0, 6, 0 )
1170	ENDIF
1171
1172	END IF
1173
1174	IF ( radiation ) THEN
1175	IF ( radiation_scheme /= 'constant' .AND. &
1176	radiation_scheme /= 'clear-sky' .AND. &
1177	radiation_scheme /= 'rrtmg' ) THEN
1178	message_string = 'unknown radiation_scheme = '// &
1179	TRIM( radiation_scheme )
1180	CALL message( 'check_parameters', 'PA0405', 1, 2, 0, 6, 0 )
1181	ELSEIF ( radiation_scheme == 'rrtmg' ) THEN
1182	#if ! defined ( __rrtmg )
1183	message_string = 'radiation_scheme = "rrtmg" requires ' // &
1184	'compilation of PALM with pre-processor ' // &
1185	'directive -D__rrtmg'
1186	CALL message( 'check_parameters', 'PA0407', 1, 2, 0, 6, 0 )
1187	#endif
1188	#if defined ( __rrtmg ) && ! defined( __netcdf )
1189	message_string = 'radiation_scheme = "rrtmg" requires ' // &
1190	'the use of NetCDF (preprocessor directive ' // &
1191	'-D__netcdf'
1192	CALL message( 'check_parameters', 'PA0412', 1, 2, 0, 6, 0 )
1193	#endif
1194
1195	ENDIF
1196	IF ( albedo_type == 0 .AND. albedo == 9999999.9_wp .AND. &
1197	radiation_scheme == 'clear-sky') THEN
1198	message_string = 'radiation_scheme = "clear-sky" in combination' // &
1199	'with albedo_type = 0 requires setting of albedo'// &
1200	' /= 9999999.9'
1201	CALL message( 'check_parameters', 'PA0410', 1, 2, 0, 6, 0 )
1202	ENDIF
1203	IF ( albedo_type == 0 .AND. radiation_scheme == 'rrtmg' .AND. &
1204	( albedo_lw_dif == 9999999.9_wp .OR. albedo_lw_dir == 9999999.9_wp&
1205	.OR. albedo_sw_dif == 9999999.9_wp .OR. albedo_sw_dir == 9999999.9_wp&
1206	) ) THEN
1207	message_string = 'radiation_scheme = "rrtmg" in combination' // &
1208	'with albedo_type = 0 requires setting of ' // &
1209	'albedo_lw_dif /= 9999999.9' // &
1210	'albedo_lw_dir /= 9999999.9' // &
1211	'albedo_sw_dif /= 9999999.9 and' // &
1212	'albedo_sw_dir /= 9999999.9'
1213	CALL message( 'check_parameters', 'PA0411', 1, 2, 0, 6, 0 )
1214	ENDIF
1215	IF ( topography /= 'flat' ) THEN
1216	message_string = 'radiation scheme cannot be used ' // &
1217	'in combination with topography /= "flat"'
1218	CALL message( 'check_parameters', 'PA0414', 1, 2, 0, 6, 0 )
1219	ENDIF
1220	ENDIF
1221
1222	IF ( .NOT. ( loop_optimization == 'cache' .OR. &
1223	loop_optimization == 'vector' ) &
1224	.AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
1225	message_string = 'cloud_scheme = seifert_beheng requires ' // &
1226	'loop_optimization = "cache" or "vector"'
1227	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
1228	ENDIF
1229
1230	!
1231	!-- In case of no model continuation run, check initialising parameters and
1232	!-- deduce further quantities
1233	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1234
1235	!
1236	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
1237	pt_init = pt_surface
1238	IF ( humidity ) THEN
1239	q_init = q_surface
1240	ENDIF
1241	IF ( ocean ) sa_init = sa_surface
1242	IF ( passive_scalar ) q_init = s_surface
1243
1244	!
1245	!--
1246	!-- If required, compute initial profile of the geostrophic wind
1247	!-- (component ug)
1248	i = 1
1249	gradient = 0.0_wp
1250
1251	IF ( .NOT. ocean ) THEN
1252
1253	ug_vertical_gradient_level_ind(1) = 0
1254	ug(0) = ug_surface
1255	DO k = 1, nzt+1
1256	IF ( i < 11 ) THEN
1257	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
1258	ug_vertical_gradient_level(i) >= 0.0_wp ) THEN
1259	gradient = ug_vertical_gradient(i) / 100.0_wp
1260	ug_vertical_gradient_level_ind(i) = k - 1
1261	i = i + 1
1262	ENDIF
1263	ENDIF
1264	IF ( gradient /= 0.0_wp ) THEN
1265	IF ( k /= 1 ) THEN
1266	ug(k) = ug(k-1) + dzu(k) * gradient
1267	ELSE
1268	ug(k) = ug_surface + dzu(k) * gradient
1269	ENDIF
1270	ELSE
1271	ug(k) = ug(k-1)
1272	ENDIF
1273	ENDDO
1274
1275	ELSE
1276
1277	ug_vertical_gradient_level_ind(1) = nzt+1
1278	ug(nzt+1) = ug_surface
1279	DO k = nzt, nzb, -1
1280	IF ( i < 11 ) THEN
1281	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
1282	ug_vertical_gradient_level(i) <= 0.0_wp ) THEN
1283	gradient = ug_vertical_gradient(i) / 100.0_wp
1284	ug_vertical_gradient_level_ind(i) = k + 1
1285	i = i + 1
1286	ENDIF
1287	ENDIF
1288	IF ( gradient /= 0.0_wp ) THEN
1289	IF ( k /= nzt ) THEN
1290	ug(k) = ug(k+1) - dzu(k+1) * gradient
1291	ELSE
1292	ug(k) = ug_surface - 0.5_wp * dzu(k+1) * gradient
1293	ug(k+1) = ug_surface + 0.5_wp * dzu(k+1) * gradient
1294	ENDIF
1295	ELSE
1296	ug(k) = ug(k+1)
1297	ENDIF
1298	ENDDO
1299
1300	ENDIF
1301
1302	!
1303	!-- In case of no given gradients for ug, choose a zero gradient
1304	IF ( ug_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1305	ug_vertical_gradient_level(1) = 0.0_wp
1306	ENDIF
1307
1308	!
1309	!--
1310	!-- If required, compute initial profile of the geostrophic wind
1311	!-- (component vg)
1312	i = 1
1313	gradient = 0.0_wp
1314
1315	IF ( .NOT. ocean ) THEN
1316
1317	vg_vertical_gradient_level_ind(1) = 0
1318	vg(0) = vg_surface
1319	DO k = 1, nzt+1
1320	IF ( i < 11 ) THEN
1321	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1322	vg_vertical_gradient_level(i) >= 0.0_wp ) THEN
1323	gradient = vg_vertical_gradient(i) / 100.0_wp
1324	vg_vertical_gradient_level_ind(i) = k - 1
1325	i = i + 1
1326	ENDIF
1327	ENDIF
1328	IF ( gradient /= 0.0_wp ) THEN
1329	IF ( k /= 1 ) THEN
1330	vg(k) = vg(k-1) + dzu(k) * gradient
1331	ELSE
1332	vg(k) = vg_surface + dzu(k) * gradient
1333	ENDIF
1334	ELSE
1335	vg(k) = vg(k-1)
1336	ENDIF
1337	ENDDO
1338
1339	ELSE
1340
1341	vg_vertical_gradient_level_ind(1) = nzt+1
1342	vg(nzt+1) = vg_surface
1343	DO k = nzt, nzb, -1
1344	IF ( i < 11 ) THEN
1345	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1346	vg_vertical_gradient_level(i) <= 0.0_wp ) THEN
1347	gradient = vg_vertical_gradient(i) / 100.0_wp
1348	vg_vertical_gradient_level_ind(i) = k + 1
1349	i = i + 1
1350	ENDIF
1351	ENDIF
1352	IF ( gradient /= 0.0_wp ) THEN
1353	IF ( k /= nzt ) THEN
1354	vg(k) = vg(k+1) - dzu(k+1) * gradient
1355	ELSE
1356	vg(k) = vg_surface - 0.5_wp * dzu(k+1) * gradient
1357	vg(k+1) = vg_surface + 0.5_wp * dzu(k+1) * gradient
1358	ENDIF
1359	ELSE
1360	vg(k) = vg(k+1)
1361	ENDIF
1362	ENDDO
1363
1364	ENDIF
1365
1366	!
1367	!-- In case of no given gradients for vg, choose a zero gradient
1368	IF ( vg_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1369	vg_vertical_gradient_level(1) = 0.0_wp
1370	ENDIF
1371
1372	!
1373	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1374	!-- interpolate them from wind profile data (if given)
1375	IF ( u_profile(1) == 9999999.9_wp .AND. v_profile(1) == 9999999.9_wp ) THEN
1376
1377	u_init = ug
1378	v_init = vg
1379
1380	ELSEIF ( u_profile(1) == 0.0_wp .AND. v_profile(1) == 0.0_wp ) THEN
1381
1382	IF ( uv_heights(1) /= 0.0_wp ) THEN
1383	message_string = 'uv_heights(1) must be 0.0'
1384	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1385	ENDIF
1386
1387	use_prescribed_profile_data = .TRUE.
1388
1389	kk = 1
1390	u_init(0) = 0.0_wp
1391	v_init(0) = 0.0_wp
1392
1393	DO k = 1, nz+1
1394
1395	IF ( kk < 100 ) THEN
1396	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1397	kk = kk + 1
1398	IF ( kk == 100 ) EXIT
1399	ENDDO
1400	ENDIF
1401
1402	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9_wp ) THEN
1403	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1404	( uv_heights(kk+1) - uv_heights(kk) ) * &
1405	( u_profile(kk+1) - u_profile(kk) )
1406	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1407	( uv_heights(kk+1) - uv_heights(kk) ) * &
1408	( v_profile(kk+1) - v_profile(kk) )
1409	ELSE
1410	u_init(k) = u_profile(kk)
1411	v_init(k) = v_profile(kk)
1412	ENDIF
1413
1414	ENDDO
1415
1416	ELSE
1417
1418	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1419	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1420
1421	ENDIF
1422
1423	!
1424	!-- Compute initial temperature profile using the given temperature gradients
1425	IF ( .NOT. neutral ) THEN
1426
1427	i = 1
1428	gradient = 0.0_wp
1429
1430	IF ( .NOT. ocean ) THEN
1431
1432	pt_vertical_gradient_level_ind(1) = 0
1433	DO k = 1, nzt+1
1434	IF ( i < 11 ) THEN
1435	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1436	pt_vertical_gradient_level(i) >= 0.0_wp ) THEN
1437	gradient = pt_vertical_gradient(i) / 100.0_wp
1438	pt_vertical_gradient_level_ind(i) = k - 1
1439	i = i + 1
1440	ENDIF
1441	ENDIF
1442	IF ( gradient /= 0.0_wp ) THEN
1443	IF ( k /= 1 ) THEN
1444	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1445	ELSE
1446	pt_init(k) = pt_surface + dzu(k) * gradient
1447	ENDIF
1448	ELSE
1449	pt_init(k) = pt_init(k-1)
1450	ENDIF
1451	ENDDO
1452
1453	ELSE
1454
1455	pt_vertical_gradient_level_ind(1) = nzt+1
1456	DO k = nzt, 0, -1
1457	IF ( i < 11 ) THEN
1458	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1459	pt_vertical_gradient_level(i) <= 0.0_wp ) THEN
1460	gradient = pt_vertical_gradient(i) / 100.0_wp
1461	pt_vertical_gradient_level_ind(i) = k + 1
1462	i = i + 1
1463	ENDIF
1464	ENDIF
1465	IF ( gradient /= 0.0_wp ) THEN
1466	IF ( k /= nzt ) THEN
1467	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1468	ELSE
1469	pt_init(k) = pt_surface - 0.5_wp * dzu(k+1) * gradient
1470	pt_init(k+1) = pt_surface + 0.5_wp * dzu(k+1) * gradient
1471	ENDIF
1472	ELSE
1473	pt_init(k) = pt_init(k+1)
1474	ENDIF
1475	ENDDO
1476
1477	ENDIF
1478
1479	ENDIF
1480
1481	!
1482	!-- In case of no given temperature gradients, choose gradient of neutral
1483	!-- stratification
1484	IF ( pt_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1485	pt_vertical_gradient_level(1) = 0.0_wp
1486	ENDIF
1487
1488	!
1489	!-- Store temperature gradient at the top boundary for possible Neumann
1490	!-- boundary condition
1491	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1492
1493	!
1494	!-- If required, compute initial humidity or scalar profile using the given
1495	!-- humidity/scalar gradient. In case of scalar transport, initially store
1496	!-- values of the scalar parameters on humidity parameters
1497	IF ( passive_scalar ) THEN
1498	bc_q_b = bc_s_b
1499	bc_q_t = bc_s_t
1500	q_surface = s_surface
1501	q_surface_initial_change = s_surface_initial_change
1502	q_vertical_gradient = s_vertical_gradient
1503	q_vertical_gradient_level = s_vertical_gradient_level
1504	surface_waterflux = surface_scalarflux
1505	wall_humidityflux = wall_scalarflux
1506	ENDIF
1507
1508	IF ( humidity .OR. passive_scalar ) THEN
1509
1510	i = 1
1511	gradient = 0.0_wp
1512	q_vertical_gradient_level_ind(1) = 0
1513	DO k = 1, nzt+1
1514	IF ( i < 11 ) THEN
1515	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1516	q_vertical_gradient_level(i) >= 0.0_wp ) THEN
1517	gradient = q_vertical_gradient(i) / 100.0_wp
1518	q_vertical_gradient_level_ind(i) = k - 1
1519	i = i + 1
1520	ENDIF
1521	ENDIF
1522	IF ( gradient /= 0.0_wp ) THEN
1523	IF ( k /= 1 ) THEN
1524	q_init(k) = q_init(k-1) + dzu(k) * gradient
1525	ELSE
1526	q_init(k) = q_init(k-1) + dzu(k) * gradient
1527	ENDIF
1528	ELSE
1529	q_init(k) = q_init(k-1)
1530	ENDIF
1531	!
1532	!-- Avoid negative humidities
1533	IF ( q_init(k) < 0.0_wp ) THEN
1534	q_init(k) = 0.0_wp
1535	ENDIF
1536	ENDDO
1537
1538	!
1539	!-- In case of no given humidity gradients, choose zero gradient
1540	!-- conditions
1541	IF ( q_vertical_gradient_level(1) == -1.0_wp ) THEN
1542	q_vertical_gradient_level(1) = 0.0_wp
1543	ENDIF
1544	!
1545	!-- Store humidity, rain water content and rain drop concentration
1546	!-- gradient at the top boundary for possile Neumann boundary condition
1547	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1548	ENDIF
1549
1550	!
1551	!-- If required, compute initial salinity profile using the given salinity
1552	!-- gradients
1553	IF ( ocean ) THEN
1554
1555	i = 1
1556	gradient = 0.0_wp
1557
1558	sa_vertical_gradient_level_ind(1) = nzt+1
1559	DO k = nzt, 0, -1
1560	IF ( i < 11 ) THEN
1561	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1562	sa_vertical_gradient_level(i) <= 0.0_wp ) THEN
1563	gradient = sa_vertical_gradient(i) / 100.0_wp
1564	sa_vertical_gradient_level_ind(i) = k + 1
1565	i = i + 1
1566	ENDIF
1567	ENDIF
1568	IF ( gradient /= 0.0_wp ) THEN
1569	IF ( k /= nzt ) THEN
1570	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1571	ELSE
1572	sa_init(k) = sa_surface - 0.5_wp * dzu(k+1) * gradient
1573	sa_init(k+1) = sa_surface + 0.5_wp * dzu(k+1) * gradient
1574	ENDIF
1575	ELSE
1576	sa_init(k) = sa_init(k+1)
1577	ENDIF
1578	ENDDO
1579
1580	ENDIF
1581
1582
1583	ENDIF
1584
1585	!
1586	!-- Check if the control parameter use_subsidence_tendencies is used correctly
1587	IF ( use_subsidence_tendencies .AND. .NOT. large_scale_subsidence ) THEN
1588	message_string = 'The usage of use_subsidence_tendencies ' // &
1589	'requires large_scale_subsidence = .T..'
1590	CALL message( 'check_parameters', 'PA0396', 1, 2, 0, 6, 0 )
1591	ELSEIF ( use_subsidence_tendencies .AND. .NOT. large_scale_forcing ) THEN
1592	message_string = 'The usage of use_subsidence_tendencies ' // &
1593	'requires large_scale_forcing = .T..'
1594	CALL message( 'check_parameters', 'PA0397', 1, 2, 0, 6, 0 )
1595	ENDIF
1596
1597	!
1598	!-- Initialize large scale subsidence if required
1599	If ( large_scale_subsidence ) THEN
1600	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp .AND. &
1601	.NOT. large_scale_forcing ) THEN
1602	CALL init_w_subsidence
1603	ENDIF
1604	!
1605	!-- In case large_scale_forcing is used, profiles for subsidence velocity
1606	!-- are read in from file LSF_DATA
1607
1608	IF ( subs_vertical_gradient_level(1) == -9999999.9_wp .AND. &
1609	.NOT. large_scale_forcing ) THEN
1610	message_string = 'There is no default large scale vertical ' // &
1611	'velocity profile set. Specify the subsidence ' // &
1612	'velocity profile via subs_vertical_gradient and ' // &
1613	'subs_vertical_gradient_level.'
1614	CALL message( 'check_parameters', 'PA0380', 1, 2, 0, 6, 0 )
1615	ENDIF
1616	ELSE
1617	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp ) THEN
1618	message_string = 'Enable usage of large scale subsidence by ' // &
1619	'setting large_scale_subsidence = .T..'
1620	CALL message( 'check_parameters', 'PA0381', 1, 2, 0, 6, 0 )
1621	ENDIF
1622	ENDIF
1623
1624	!
1625	!-- Compute Coriolis parameter
1626	f = 2.0_wp * omega * SIN( phi / 180.0_wp * pi )
1627	fs = 2.0_wp * omega * COS( phi / 180.0_wp * pi )
1628
1629	!
1630	!-- Check and set buoyancy related parameters and switches
1631	IF ( reference_state == 'horizontal_average' ) THEN
1632	CONTINUE
1633	ELSEIF ( reference_state == 'initial_profile' ) THEN
1634	use_initial_profile_as_reference = .TRUE.
1635	ELSEIF ( reference_state == 'single_value' ) THEN
1636	use_single_reference_value = .TRUE.
1637	IF ( pt_reference == 9999999.9_wp ) pt_reference = pt_surface
1638	vpt_reference = pt_reference * ( 1.0_wp + 0.61_wp * q_surface )
1639	ELSE
1640	message_string = 'illegal value for reference_state: "' // &
1641	TRIM( reference_state ) // '"'
1642	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1643	ENDIF
1644
1645	!
1646	!-- Ocean runs always use reference values in the buoyancy term
1647	IF ( ocean ) THEN
1648	reference_state = 'single_value'
1649	use_single_reference_value = .TRUE.
1650	ENDIF
1651
1652	!
1653	!-- Sign of buoyancy/stability terms
1654	IF ( ocean ) atmos_ocean_sign = -1.0_wp
1655
1656	!
1657	!-- Ocean version must use flux boundary conditions at the top
1658	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1659	message_string = 'use_top_fluxes must be .TRUE. in ocean mode'
1660	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1661	ENDIF
1662
1663	!
1664	!-- In case of a given slope, compute the relevant quantities
1665	IF ( alpha_surface /= 0.0_wp ) THEN
1666	IF ( ABS( alpha_surface ) > 90.0_wp ) THEN
1667	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1668	' ) must be < 90.0'
1669	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1670	ENDIF
1671	sloping_surface = .TRUE.
1672	cos_alpha_surface = COS( alpha_surface / 180.0_wp * pi )
1673	sin_alpha_surface = SIN( alpha_surface / 180.0_wp * pi )
1674	ENDIF
1675
1676	!
1677	!-- Check time step and cfl_factor
1678	IF ( dt /= -1.0_wp ) THEN
1679	IF ( dt <= 0.0_wp .AND. dt /= -1.0_wp ) THEN
1680	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1681	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1682	ENDIF
1683	dt_3d = dt
1684	dt_fixed = .TRUE.
1685	ENDIF
1686
1687	IF ( cfl_factor <= 0.0_wp .OR. cfl_factor > 1.0_wp ) THEN
1688	IF ( cfl_factor == -1.0_wp ) THEN
1689	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1690	cfl_factor = 0.8_wp
1691	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1692	cfl_factor = 0.9_wp
1693	ELSE
1694	cfl_factor = 0.9_wp
1695	ENDIF
1696	ELSE
1697	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1698	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1699	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1700	ENDIF
1701	ENDIF
1702
1703	!
1704	!-- Store simulated time at begin
1705	simulated_time_at_begin = simulated_time
1706
1707	!
1708	!-- Store reference time for coupled runs and change the coupling flag,
1709	!-- if ...
1710	IF ( simulated_time == 0.0_wp ) THEN
1711	IF ( coupling_start_time == 0.0_wp ) THEN
1712	time_since_reference_point = 0.0_wp
1713	ELSEIF ( time_since_reference_point < 0.0_wp ) THEN
1714	run_coupled = .FALSE.
1715	ENDIF
1716	ENDIF
1717
1718	!
1719	!-- Set wind speed in the Galilei-transformed system
1720	IF ( galilei_transformation ) THEN
1721	IF ( use_ug_for_galilei_tr .AND. &
1722	ug_vertical_gradient_level(1) == 0.0_wp .AND. &
1723	ug_vertical_gradient(1) == 0.0_wp .AND. &
1724	vg_vertical_gradient_level(1) == 0.0_wp .AND. &
1725	vg_vertical_gradient(1) == 0.0_wp ) THEN
1726	u_gtrans = ug_surface * 0.6_wp
1727	v_gtrans = vg_surface * 0.6_wp
1728	ELSEIF ( use_ug_for_galilei_tr .AND. &
1729	( ug_vertical_gradient_level(1) /= 0.0_wp .OR. &
1730	ug_vertical_gradient(1) /= 0.0_wp ) ) THEN
1731	message_string = 'baroclinity (ug) not allowed simultaneously' // &
1732	' with galilei transformation'
1733	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1734	ELSEIF ( use_ug_for_galilei_tr .AND. &
1735	( vg_vertical_gradient_level(1) /= 0.0_wp .OR. &
1736	vg_vertical_gradient(1) /= 0.0_wp ) ) THEN
1737	message_string = 'baroclinity (vg) not allowed simultaneously' // &
1738	' with galilei transformation'
1739	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1740	ELSE
1741	message_string = 'variable translation speed used for galilei-' // &
1742	'transformation, which may cause & instabilities in stably ' // &
1743	'stratified regions'
1744	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1745	ENDIF
1746	ENDIF
1747
1748	!
1749	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1750	!-- fluxes have to be used in the diffusion-terms
1751	IF ( constant_flux_layer ) use_surface_fluxes = .TRUE.
1752
1753	!
1754	!-- Check boundary conditions and set internal variables:
1755	!-- Lateral boundary conditions
1756	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1757	bc_lr /= 'radiation/dirichlet' ) THEN
1758	message_string = 'unknown boundary condition: bc_lr = "' // &
1759	TRIM( bc_lr ) // '"'
1760	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1761	ENDIF
1762	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1763	bc_ns /= 'radiation/dirichlet' ) THEN
1764	message_string = 'unknown boundary condition: bc_ns = "' // &
1765	TRIM( bc_ns ) // '"'
1766	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1767	ENDIF
1768
1769	!
1770	!-- Internal variables used for speed optimization in if clauses
1771	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1772	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1773	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1774	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1775	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1776	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1777
1778	!
1779	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1780	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1781	!-- and tools do not work with non-cyclic boundary conditions.
1782	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1783	IF ( psolver(1:9) /= 'multigrid' ) THEN
1784	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1785	'psolver = "' // TRIM( psolver ) // '"'
1786	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1787	ENDIF
1788	IF ( momentum_advec /= 'pw-scheme' .AND. &
1789	( momentum_advec /= 'ws-scheme' .AND. &
1790	momentum_advec /= 'ws-scheme-mono' ) &
1791	) THEN
1792
1793	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1794	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1795	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1796	ENDIF
1797	IF ( scalar_advec /= 'pw-scheme' .AND. &
1798	( scalar_advec /= 'ws-scheme' .AND. &
1799	scalar_advec /= 'ws-scheme-mono' ) &
1800	) THEN
1801	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1802	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1803	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1804	ENDIF
1805	IF ( galilei_transformation ) THEN
1806	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1807	'galilei_transformation = .T.'
1808	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1809	ENDIF
1810	ENDIF
1811
1812	!
1813	!-- Bottom boundary condition for the turbulent Kinetic energy
1814	IF ( bc_e_b == 'neumann' ) THEN
1815	ibc_e_b = 1
1816	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1817	ibc_e_b = 2
1818	IF ( .NOT. constant_flux_layer ) THEN
1819	bc_e_b = 'neumann'
1820	ibc_e_b = 1
1821	message_string = 'boundary condition bc_e_b changed to "' // &
1822	TRIM( bc_e_b ) // '"'
1823	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1824	ENDIF
1825	ELSE
1826	message_string = 'unknown boundary condition: bc_e_b = "' // &
1827	TRIM( bc_e_b ) // '"'
1828	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1829	ENDIF
1830
1831	!
1832	!-- Boundary conditions for perturbation pressure
1833	IF ( bc_p_b == 'dirichlet' ) THEN
1834	ibc_p_b = 0
1835	ELSEIF ( bc_p_b == 'neumann' ) THEN
1836	ibc_p_b = 1
1837	ELSE
1838	message_string = 'unknown boundary condition: bc_p_b = "' // &
1839	TRIM( bc_p_b ) // '"'
1840	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1841	ENDIF
1842
1843	IF ( bc_p_t == 'dirichlet' ) THEN
1844	ibc_p_t = 0
1845	ELSEIF ( bc_p_t == 'neumann' ) THEN
1846	ibc_p_t = 1
1847	ELSE
1848	message_string = 'unknown boundary condition: bc_p_t = "' // &
1849	TRIM( bc_p_t ) // '"'
1850	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1851	ENDIF
1852
1853	!
1854	!-- Boundary conditions for potential temperature
1855	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1856	ibc_pt_b = 2
1857	ELSE
1858	IF ( bc_pt_b == 'dirichlet' ) THEN
1859	ibc_pt_b = 0
1860	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1861	ibc_pt_b = 1
1862	ELSE
1863	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1864	TRIM( bc_pt_b ) // '"'
1865	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1866	ENDIF
1867	ENDIF
1868
1869	IF ( bc_pt_t == 'dirichlet' ) THEN
1870	ibc_pt_t = 0
1871	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1872	ibc_pt_t = 1
1873	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1874	ibc_pt_t = 2
1875	ELSE
1876	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1877	TRIM( bc_pt_t ) // '"'
1878	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1879	ENDIF
1880
1881	IF ( surface_heatflux == 9999999.9_wp ) THEN
1882	constant_heatflux = .FALSE.
1883	IF ( large_scale_forcing .OR. land_surface ) THEN
1884	IF ( ibc_pt_b == 0 ) THEN
1885	constant_heatflux = .FALSE.
1886	ELSEIF ( ibc_pt_b == 1 ) THEN
1887	constant_heatflux = .TRUE.
1888	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1889	.NOT. land_surface ) THEN
1890	surface_heatflux = shf_surf(1)
1891	ELSE
1892	surface_heatflux = 0.0_wp
1893	ENDIF
1894	ENDIF
1895	ENDIF
1896	ELSE
1897	constant_heatflux = .TRUE.
1898	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1899	large_scale_forcing .AND. .NOT. land_surface ) THEN
1900	surface_heatflux = shf_surf(1)
1901	ENDIF
1902	ENDIF
1903
1904	IF ( top_heatflux == 9999999.9_wp ) constant_top_heatflux = .FALSE.
1905
1906	IF ( neutral ) THEN
1907
1908	IF ( surface_heatflux /= 0.0_wp .AND. surface_heatflux /= 9999999.9_wp ) &
1909	THEN
1910	message_string = 'heatflux must not be set for pure neutral flow'
1911	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1912	ENDIF
1913
1914	IF ( top_heatflux /= 0.0_wp .AND. top_heatflux /= 9999999.9_wp ) &
1915	THEN
1916	message_string = 'heatflux must not be set for pure neutral flow'
1917	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1918	ENDIF
1919
1920	ENDIF
1921
1922	IF ( top_momentumflux_u /= 9999999.9_wp .AND. &
1923	top_momentumflux_v /= 9999999.9_wp ) THEN
1924	constant_top_momentumflux = .TRUE.
1925	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9_wp .AND. &
1926	top_momentumflux_v == 9999999.9_wp ) ) THEN
1927	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1928	'must be set'
1929	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1930	ENDIF
1931
1932	!
1933	!-- A given surface temperature implies Dirichlet boundary condition for
1934	!-- temperature. In this case specification of a constant heat flux is
1935	!-- forbidden.
1936	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1937	surface_heatflux /= 0.0_wp ) THEN
1938	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1939	'& is not allowed with constant_heatflux = .TRUE.'
1940	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1941	ENDIF
1942	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0_wp ) THEN
1943	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1944	'wed with pt_surface_initial_change (/=0) = ', &
1945	pt_surface_initial_change
1946	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1947	ENDIF
1948
1949	!
1950	!-- A given temperature at the top implies Dirichlet boundary condition for
1951	!-- temperature. In this case specification of a constant heat flux is
1952	!-- forbidden.
1953	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1954	top_heatflux /= 0.0_wp ) THEN
1955	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1956	'" is not allowed with constant_top_heatflux = .TRUE.'
1957	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1958	ENDIF
1959
1960	!
1961	!-- Boundary conditions for salinity
1962	IF ( ocean ) THEN
1963	IF ( bc_sa_t == 'dirichlet' ) THEN
1964	ibc_sa_t = 0
1965	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1966	ibc_sa_t = 1
1967	ELSE
1968	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1969	TRIM( bc_sa_t ) // '"'
1970	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1971	ENDIF
1972
1973	IF ( top_salinityflux == 9999999.9_wp ) constant_top_salinityflux = .FALSE.
1974	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9_wp ) THEN
1975	message_string = 'boundary condition: bc_sa_t = "' // &
1976	TRIM( bc_sa_t ) // '" requires to set ' // &
1977	'top_salinityflux'
1978	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1979	ENDIF
1980
1981	!
1982	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1983	!-- salinity. In this case specification of a constant salinity flux is
1984	!-- forbidden.
1985	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1986	top_salinityflux /= 0.0_wp ) THEN
1987	message_string = 'boundary condition: bc_sa_t = "' // &
1988	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1989	'constant_top_salinityflux = .TRUE.'
1990	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1991	ENDIF
1992
1993	ENDIF
1994
1995	!
1996	!-- In case of humidity or passive scalar, set boundary conditions for total
1997	!-- water content / scalar
1998	IF ( humidity .OR. passive_scalar ) THEN
1999	IF ( humidity ) THEN
2000	sq = 'q'
2001	ELSE
2002	sq = 's'
2003	ENDIF
2004	IF ( bc_q_b == 'dirichlet' ) THEN
2005	ibc_q_b = 0
2006	ELSEIF ( bc_q_b == 'neumann' ) THEN
2007	ibc_q_b = 1
2008	ELSE
2009	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
2010	'_b ="' // TRIM( bc_q_b ) // '"'
2011	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
2012	ENDIF
2013	IF ( bc_q_t == 'dirichlet' ) THEN
2014	ibc_q_t = 0
2015	ELSEIF ( bc_q_t == 'neumann' ) THEN
2016	ibc_q_t = 1
2017	ELSE
2018	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
2019	'_t ="' // TRIM( bc_q_t ) // '"'
2020	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
2021	ENDIF
2022
2023	IF ( surface_waterflux == 9999999.9_wp ) THEN
2024	constant_waterflux = .FALSE.
2025	IF ( large_scale_forcing .OR. land_surface ) THEN
2026	IF ( ibc_q_b == 0 ) THEN
2027	constant_waterflux = .FALSE.
2028	ELSEIF ( ibc_q_b == 1 ) THEN
2029	constant_waterflux = .TRUE.
2030	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
2031	surface_waterflux = qsws_surf(1)
2032	ENDIF
2033	ENDIF
2034	ENDIF
2035	ELSE
2036	constant_waterflux = .TRUE.
2037	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
2038	large_scale_forcing ) THEN
2039	surface_waterflux = qsws_surf(1)
2040	ENDIF
2041	ENDIF
2042
2043	!
2044	!-- A given surface humidity implies Dirichlet boundary condition for
2045	!-- humidity. In this case specification of a constant water flux is
2046	!-- forbidden.
2047	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
2048	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
2049	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
2050	'th prescribed surface flux'
2051	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
2052	ENDIF
2053	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0_wp ) THEN
2054	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
2055	'wed with ', sq, '_surface_initial_change (/=0) = ', &
2056	q_surface_initial_change
2057	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
2058	ENDIF
2059
2060	ENDIF
2061	!
2062	!-- Boundary conditions for horizontal components of wind speed
2063	IF ( bc_uv_b == 'dirichlet' ) THEN
2064	ibc_uv_b = 0
2065	ELSEIF ( bc_uv_b == 'neumann' ) THEN
2066	ibc_uv_b = 1
2067	IF ( constant_flux_layer ) THEN
2068	message_string = 'boundary condition: bc_uv_b = "' // &
2069	TRIM( bc_uv_b ) // '" is not allowed with constant_flux_layer' &
2070	// ' = .TRUE.'
2071	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
2072	ENDIF
2073	ELSE
2074	message_string = 'unknown boundary condition: bc_uv_b = "' // &
2075	TRIM( bc_uv_b ) // '"'
2076	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
2077	ENDIF
2078	!
2079	!-- In case of coupled simulations u and v at the ground in atmosphere will be
2080	!-- assigned with the u and v values of the ocean surface
2081	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
2082	ibc_uv_b = 2
2083	ENDIF
2084
2085	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
2086	bc_uv_t = 'neumann'
2087	ibc_uv_t = 1
2088	ELSE
2089	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
2090	ibc_uv_t = 0
2091	IF ( bc_uv_t == 'dirichlet_0' ) THEN
2092	!
2093	!-- Velocities for the initial u,v-profiles are set zero at the top
2094	!-- in case of dirichlet_0 conditions
2095	u_init(nzt+1) = 0.0_wp
2096	v_init(nzt+1) = 0.0_wp
2097	ENDIF
2098	ELSEIF ( bc_uv_t == 'neumann' ) THEN
2099	ibc_uv_t = 1
2100	ELSE
2101	message_string = 'unknown boundary condition: bc_uv_t = "' // &
2102	TRIM( bc_uv_t ) // '"'
2103	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
2104	ENDIF
2105	ENDIF
2106
2107	!
2108	!-- Compute and check, respectively, the Rayleigh Damping parameter
2109	IF ( rayleigh_damping_factor == -1.0_wp ) THEN
2110	rayleigh_damping_factor = 0.0_wp
2111	ELSE
2112	IF ( rayleigh_damping_factor < 0.0_wp .OR. rayleigh_damping_factor > 1.0_wp ) &
2113	THEN
2114	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
2115	rayleigh_damping_factor, ' out of range [0.0,1.0]'
2116	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
2117	ENDIF
2118	ENDIF
2119
2120	IF ( rayleigh_damping_height == -1.0_wp ) THEN
2121	IF ( .NOT. ocean ) THEN
2122	rayleigh_damping_height = 0.66666666666_wp * zu(nzt)
2123	ELSE
2124	rayleigh_damping_height = 0.66666666666_wp * zu(nzb)
2125	ENDIF
2126	ELSE
2127	IF ( .NOT. ocean ) THEN
2128	IF ( rayleigh_damping_height < 0.0_wp .OR. &
2129	rayleigh_damping_height > zu(nzt) ) THEN
2130	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
2131	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
2132	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
2133	ENDIF
2134	ELSE
2135	IF ( rayleigh_damping_height > 0.0_wp .OR. &
2136	rayleigh_damping_height < zu(nzb) ) THEN
2137	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
2138	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
2139	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
2140	ENDIF
2141	ENDIF
2142	ENDIF
2143
2144	!
2145	!-- Check number of chosen statistic regions. More than 10 regions are not
2146	!-- allowed, because so far no more than 10 corresponding output files can
2147	!-- be opened (cf. check_open)
2148	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
2149	WRITE ( message_string, * ) 'number of statistic_regions = ', &
2150	statistic_regions+1, ' but only 10 regions are allowed'
2151	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
2152	ENDIF
2153	IF ( normalizing_region > statistic_regions .OR. &
2154	normalizing_region < 0) THEN
2155	WRITE ( message_string, * ) 'normalizing_region = ', &
2156	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
2157	' (value of statistic_regions)'
2158	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
2159	ENDIF
2160
2161	!
2162	!-- Set the default intervals for data output, if necessary
2163	!-- NOTE: dt_dosp has already been set in package_parin
2164	IF ( dt_data_output /= 9999999.9_wp ) THEN
2165	IF ( dt_dopr == 9999999.9_wp ) dt_dopr = dt_data_output
2166	IF ( dt_dopts == 9999999.9_wp ) dt_dopts = dt_data_output
2167	IF ( dt_do2d_xy == 9999999.9_wp ) dt_do2d_xy = dt_data_output
2168	IF ( dt_do2d_xz == 9999999.9_wp ) dt_do2d_xz = dt_data_output
2169	IF ( dt_do2d_yz == 9999999.9_wp ) dt_do2d_yz = dt_data_output
2170	IF ( dt_do3d == 9999999.9_wp ) dt_do3d = dt_data_output
2171	IF ( dt_data_output_av == 9999999.9_wp ) dt_data_output_av = dt_data_output
2172	DO mid = 1, max_masks
2173	IF ( dt_domask(mid) == 9999999.9_wp ) dt_domask(mid) = dt_data_output
2174	ENDDO
2175	ENDIF
2176
2177	!
2178	!-- Set the default skip time intervals for data output, if necessary
2179	IF ( skip_time_dopr == 9999999.9_wp ) &
2180	skip_time_dopr = skip_time_data_output
2181	IF ( skip_time_dosp == 9999999.9_wp ) &
2182	skip_time_dosp = skip_time_data_output
2183	IF ( skip_time_do2d_xy == 9999999.9_wp ) &
2184	skip_time_do2d_xy = skip_time_data_output
2185	IF ( skip_time_do2d_xz == 9999999.9_wp ) &
2186	skip_time_do2d_xz = skip_time_data_output
2187	IF ( skip_time_do2d_yz == 9999999.9_wp ) &
2188	skip_time_do2d_yz = skip_time_data_output
2189	IF ( skip_time_do3d == 9999999.9_wp ) &
2190	skip_time_do3d = skip_time_data_output
2191	IF ( skip_time_data_output_av == 9999999.9_wp ) &
2192	skip_time_data_output_av = skip_time_data_output
2193	DO mid = 1, max_masks
2194	IF ( skip_time_domask(mid) == 9999999.9_wp ) &
2195	skip_time_domask(mid) = skip_time_data_output
2196	ENDDO
2197
2198	!
2199	!-- Check the average intervals (first for 3d-data, then for profiles and
2200	!-- spectra)
2201	IF ( averaging_interval > dt_data_output_av ) THEN
2202	WRITE( message_string, * ) 'averaging_interval = ', &
2203	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
2204	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
2205	ENDIF
2206
2207	IF ( averaging_interval_pr == 9999999.9_wp ) THEN
2208	averaging_interval_pr = averaging_interval
2209	ENDIF
2210
2211	IF ( averaging_interval_pr > dt_dopr ) THEN
2212	WRITE( message_string, * ) 'averaging_interval_pr = ', &
2213	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
2214	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
2215	ENDIF
2216
2217	IF ( averaging_interval_sp == 9999999.9_wp ) THEN
2218	averaging_interval_sp = averaging_interval
2219	ENDIF
2220
2221	IF ( averaging_interval_sp > dt_dosp ) THEN
2222	WRITE( message_string, * ) 'averaging_interval_sp = ', &
2223	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
2224	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
2225	ENDIF
2226
2227	!
2228	!-- Set the default interval for profiles entering the temporal average
2229	IF ( dt_averaging_input_pr == 9999999.9_wp ) THEN
2230	dt_averaging_input_pr = dt_averaging_input
2231	ENDIF
2232
2233	!
2234	!-- Set the default interval for the output of timeseries to a reasonable
2235	!-- value (tries to minimize the number of calls of flow_statistics)
2236	IF ( dt_dots == 9999999.9_wp ) THEN
2237	IF ( averaging_interval_pr == 0.0_wp ) THEN
2238	dt_dots = MIN( dt_run_control, dt_dopr )
2239	ELSE
2240	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
2241	ENDIF
2242	ENDIF
2243
2244	!
2245	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
2246	IF ( dt_averaging_input > averaging_interval ) THEN
2247	WRITE( message_string, * ) 'dt_averaging_input = ', &
2248	dt_averaging_input, ' must be <= averaging_interval = ', &
2249	averaging_interval
2250	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
2251	ENDIF
2252
2253	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
2254	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
2255	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
2256	averaging_interval_pr
2257	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
2258	ENDIF
2259
2260	!
2261	!-- Set the default value for the integration interval of precipitation amount
2262	IF ( precipitation ) THEN
2263	IF ( precipitation_amount_interval == 9999999.9_wp ) THEN
2264	precipitation_amount_interval = dt_do2d_xy
2265	ELSE
2266	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
2267	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
2268	precipitation_amount_interval, ' must not be larger than ', &
2269	'dt_do2d_xy = ', dt_do2d_xy
2270	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
2271	ENDIF
2272	ENDIF
2273	ENDIF
2274
2275	!
2276	!-- Determine the number of output profiles and check whether they are
2277	!-- permissible
2278	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
2279
2280	dopr_n = dopr_n + 1
2281	i = dopr_n
2282
2283	!
2284	!-- Determine internal profile number (for hom, homs)
2285	!-- and store height levels
2286	SELECT CASE ( TRIM( data_output_pr(i) ) )
2287
2288	CASE ( 'u', '#u' )
2289	dopr_index(i) = 1
2290	dopr_unit(i) = 'm/s'
2291	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
2292	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2293	dopr_initial_index(i) = 5
2294	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
2295	data_output_pr(i) = data_output_pr(i)(2:)
2296	ENDIF
2297
2298	CASE ( 'v', '#v' )
2299	dopr_index(i) = 2
2300	dopr_unit(i) = 'm/s'
2301	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
2302	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2303	dopr_initial_index(i) = 6
2304	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
2305	data_output_pr(i) = data_output_pr(i)(2:)
2306	ENDIF
2307
2308	CASE ( 'w' )
2309	dopr_index(i) = 3
2310	dopr_unit(i) = 'm/s'
2311	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2312
2313	CASE ( 'pt', '#pt' )
2314	IF ( .NOT. cloud_physics ) THEN
2315	dopr_index(i) = 4
2316	dopr_unit(i) = 'K'
2317	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2318	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2319	dopr_initial_index(i) = 7
2320	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2321	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
2322	data_output_pr(i) = data_output_pr(i)(2:)
2323	ENDIF
2324	ELSE
2325	dopr_index(i) = 43
2326	dopr_unit(i) = 'K'
2327	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2328	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2329	dopr_initial_index(i) = 28
2330	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2331	hom(nzb,2,28,:) = 0.0_wp ! because zu(nzb) is negative
2332	data_output_pr(i) = data_output_pr(i)(2:)
2333	ENDIF
2334	ENDIF
2335
2336	CASE ( 'e' )
2337	dopr_index(i) = 8
2338	dopr_unit(i) = 'm2/s2'
2339	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2340	hom(nzb,2,8,:) = 0.0_wp
2341
2342	CASE ( 'km', '#km' )
2343	dopr_index(i) = 9
2344	dopr_unit(i) = 'm2/s'
2345	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2346	hom(nzb,2,9,:) = 0.0_wp
2347	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2348	dopr_initial_index(i) = 23
2349	hom(:,2,23,:) = hom(:,2,9,:)
2350	data_output_pr(i) = data_output_pr(i)(2:)
2351	ENDIF
2352
2353	CASE ( 'kh', '#kh' )
2354	dopr_index(i) = 10
2355	dopr_unit(i) = 'm2/s'
2356	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2357	hom(nzb,2,10,:) = 0.0_wp
2358	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2359	dopr_initial_index(i) = 24
2360	hom(:,2,24,:) = hom(:,2,10,:)
2361	data_output_pr(i) = data_output_pr(i)(2:)
2362	ENDIF
2363
2364	CASE ( 'l', '#l' )
2365	dopr_index(i) = 11
2366	dopr_unit(i) = 'm'
2367	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2368	hom(nzb,2,11,:) = 0.0_wp
2369	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2370	dopr_initial_index(i) = 25
2371	hom(:,2,25,:) = hom(:,2,11,:)
2372	data_output_pr(i) = data_output_pr(i)(2:)
2373	ENDIF
2374
2375	CASE ( 'w"u"' )
2376	dopr_index(i) = 12
2377	dopr_unit(i) = 'm2/s2'
2378	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2379	IF ( constant_flux_layer ) hom(nzb,2,12,:) = zu(1)
2380
2381	CASE ( 'wu' )
2382	dopr_index(i) = 13
2383	dopr_unit(i) = 'm2/s2'
2384	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2385
2386	CASE ( 'w"v"' )
2387	dopr_index(i) = 14
2388	dopr_unit(i) = 'm2/s2'
2389	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2390	IF ( constant_flux_layer ) hom(nzb,2,14,:) = zu(1)
2391
2392	CASE ( 'wv' )
2393	dopr_index(i) = 15
2394	dopr_unit(i) = 'm2/s2'
2395	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2396
2397	CASE ( 'w"pt"' )
2398	dopr_index(i) = 16
2399	dopr_unit(i) = 'K m/s'
2400	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2401
2402	CASE ( 'wpt' )
2403	dopr_index(i) = 17
2404	dopr_unit(i) = 'K m/s'
2405	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2406
2407	CASE ( 'wpt' )
2408	dopr_index(i) = 18
2409	dopr_unit(i) = 'K m/s'
2410	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2411
2412	CASE ( 'wu' )
2413	dopr_index(i) = 19
2414	dopr_unit(i) = 'm2/s2'
2415	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2416	IF ( constant_flux_layer ) hom(nzb,2,19,:) = zu(1)
2417
2418	CASE ( 'wv' )
2419	dopr_index(i) = 20
2420	dopr_unit(i) = 'm2/s2'
2421	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2422	IF ( constant_flux_layer ) hom(nzb,2,20,:) = zu(1)
2423
2424	CASE ( 'wptBC' )
2425	dopr_index(i) = 21
2426	dopr_unit(i) = 'K m/s'
2427	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2428
2429	CASE ( 'wptBC' )
2430	dopr_index(i) = 22
2431	dopr_unit(i) = 'K m/s'
2432	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2433
2434	CASE ( 'sa', '#sa' )
2435	IF ( .NOT. ocean ) THEN
2436	message_string = 'data_output_pr = ' // &
2437	TRIM( data_output_pr(i) ) // ' is not imp' // &
2438	'lemented for ocean = .FALSE.'
2439	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2440	ELSE
2441	dopr_index(i) = 23
2442	dopr_unit(i) = 'psu'
2443	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2444	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2445	dopr_initial_index(i) = 26
2446	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2447	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2448	data_output_pr(i) = data_output_pr(i)(2:)
2449	ENDIF
2450	ENDIF
2451
2452	CASE ( 'u*2' )
2453	dopr_index(i) = 30
2454	dopr_unit(i) = 'm2/s2'
2455	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2456
2457	CASE ( 'v*2' )
2458	dopr_index(i) = 31
2459	dopr_unit(i) = 'm2/s2'
2460	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2461
2462	CASE ( 'w*2' )
2463	dopr_index(i) = 32
2464	dopr_unit(i) = 'm2/s2'
2465	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2466
2467	CASE ( 'pt*2' )
2468	dopr_index(i) = 33
2469	dopr_unit(i) = 'K2'
2470	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2471
2472	CASE ( 'e*' )
2473	dopr_index(i) = 34
2474	dopr_unit(i) = 'm2/s2'
2475	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2476
2477	CASE ( 'w2pt' )
2478	dopr_index(i) = 35
2479	dopr_unit(i) = 'K m2/s2'
2480	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2481
2482	CASE ( 'wpt2' )
2483	dopr_index(i) = 36
2484	dopr_unit(i) = 'K2 m/s'
2485	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2486
2487	CASE ( 'we' )
2488	dopr_index(i) = 37
2489	dopr_unit(i) = 'm3/s3'
2490	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2491
2492	CASE ( 'w*3' )
2493	dopr_index(i) = 38
2494	dopr_unit(i) = 'm3/s3'
2495	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2496
2497	CASE ( 'Sw' )
2498	dopr_index(i) = 39
2499	dopr_unit(i) = 'none'
2500	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2501
2502	CASE ( 'p' )
2503	dopr_index(i) = 40
2504	dopr_unit(i) = 'Pa'
2505	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2506
2507	CASE ( 'q', '#q' )
2508	IF ( .NOT. humidity ) THEN
2509	message_string = 'data_output_pr = ' // &
2510	TRIM( data_output_pr(i) ) // ' is not imp' // &
2511	'lemented for humidity = .FALSE.'
2512	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2513	ELSE
2514	dopr_index(i) = 41
2515	dopr_unit(i) = 'kg/kg'
2516	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2517	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2518	dopr_initial_index(i) = 26
2519	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2520	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2521	data_output_pr(i) = data_output_pr(i)(2:)
2522	ENDIF
2523	ENDIF
2524
2525	CASE ( 's', '#s' )
2526	IF ( .NOT. passive_scalar ) THEN
2527	message_string = 'data_output_pr = ' // &
2528	TRIM( data_output_pr(i) ) // ' is not imp' // &
2529	'lemented for passive_scalar = .FALSE.'
2530	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2531	ELSE
2532	dopr_index(i) = 41
2533	dopr_unit(i) = 'kg/m3'
2534	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2535	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2536	dopr_initial_index(i) = 26
2537	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2538	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2539	data_output_pr(i) = data_output_pr(i)(2:)
2540	ENDIF
2541	ENDIF
2542
2543	CASE ( 'qv', '#qv' )
2544	IF ( .NOT. cloud_physics ) THEN
2545	dopr_index(i) = 41
2546	dopr_unit(i) = 'kg/kg'
2547	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2548	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2549	dopr_initial_index(i) = 26
2550	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2551	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2552	data_output_pr(i) = data_output_pr(i)(2:)
2553	ENDIF
2554	ELSE
2555	dopr_index(i) = 42
2556	dopr_unit(i) = 'kg/kg'
2557	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2558	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2559	dopr_initial_index(i) = 27
2560	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2561	hom(nzb,2,27,:) = 0.0_wp ! because zu(nzb) is negative
2562	data_output_pr(i) = data_output_pr(i)(2:)
2563	ENDIF
2564	ENDIF
2565
2566	CASE ( 'lpt', '#lpt' )
2567	IF ( .NOT. cloud_physics ) THEN
2568	message_string = 'data_output_pr = ' // &
2569	TRIM( data_output_pr(i) ) // ' is not imp' // &
2570	'lemented for cloud_physics = .FALSE.'
2571	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2572	ELSE
2573	dopr_index(i) = 4
2574	dopr_unit(i) = 'K'
2575	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2576	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2577	dopr_initial_index(i) = 7
2578	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2579	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
2580	data_output_pr(i) = data_output_pr(i)(2:)
2581	ENDIF
2582	ENDIF
2583
2584	CASE ( 'vpt', '#vpt' )
2585	dopr_index(i) = 44
2586	dopr_unit(i) = 'K'
2587	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2588	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2589	dopr_initial_index(i) = 29
2590	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2591	hom(nzb,2,29,:) = 0.0_wp ! because zu(nzb) is negative
2592	data_output_pr(i) = data_output_pr(i)(2:)
2593	ENDIF
2594
2595	CASE ( 'w"vpt"' )
2596	dopr_index(i) = 45
2597	dopr_unit(i) = 'K m/s'
2598	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2599
2600	CASE ( 'wvpt' )
2601	dopr_index(i) = 46
2602	dopr_unit(i) = 'K m/s'
2603	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2604
2605	CASE ( 'wvpt' )
2606	dopr_index(i) = 47
2607	dopr_unit(i) = 'K m/s'
2608	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2609
2610	CASE ( 'w"q"' )
2611	IF ( .NOT. humidity ) THEN
2612	message_string = 'data_output_pr = ' // &
2613	TRIM( data_output_pr(i) ) // ' is not imp' // &
2614	'lemented for humidity = .FALSE.'
2615	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2616	ELSE
2617	dopr_index(i) = 48
2618	dopr_unit(i) = 'kg/kg m/s'
2619	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2620	ENDIF
2621
2622	CASE ( 'wq' )
2623	IF ( .NOT. humidity ) THEN
2624	message_string = 'data_output_pr = ' // &
2625	TRIM( data_output_pr(i) ) // ' is not imp' // &
2626	'lemented for humidity = .FALSE.'
2627	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2628	ELSE
2629	dopr_index(i) = 49
2630	dopr_unit(i) = 'kg/kg m/s'
2631	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2632	ENDIF
2633
2634	CASE ( 'wq' )
2635	IF ( .NOT. humidity ) THEN
2636	message_string = 'data_output_pr = ' // &
2637	TRIM( data_output_pr(i) ) // ' is not imp' // &
2638	'lemented for humidity = .FALSE.'
2639	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2640	ELSE
2641	dopr_index(i) = 50
2642	dopr_unit(i) = 'kg/kg m/s'
2643	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2644	ENDIF
2645
2646	CASE ( 'w"s"' )
2647	IF ( .NOT. passive_scalar ) THEN
2648	message_string = 'data_output_pr = ' // &
2649	TRIM( data_output_pr(i) ) // ' is not imp' // &
2650	'lemented for passive_scalar = .FALSE.'
2651	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2652	ELSE
2653	dopr_index(i) = 48
2654	dopr_unit(i) = 'kg/m3 m/s'
2655	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2656	ENDIF
2657
2658	CASE ( 'ws' )
2659	IF ( .NOT. passive_scalar ) THEN
2660	message_string = 'data_output_pr = ' // &
2661	TRIM( data_output_pr(i) ) // ' is not imp' // &
2662	'lemented for passive_scalar = .FALSE.'
2663	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2664	ELSE
2665	dopr_index(i) = 49
2666	dopr_unit(i) = 'kg/m3 m/s'
2667	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2668	ENDIF
2669
2670	CASE ( 'ws' )
2671	IF ( .NOT. passive_scalar ) THEN
2672	message_string = 'data_output_pr = ' // &
2673	TRIM( data_output_pr(i) ) // ' is not imp' // &
2674	'lemented for passive_scalar = .FALSE.'
2675	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2676	ELSE
2677	dopr_index(i) = 50
2678	dopr_unit(i) = 'kg/m3 m/s'
2679	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2680	ENDIF
2681
2682	CASE ( 'w"qv"' )
2683	IF ( humidity .AND. .NOT. cloud_physics ) &
2684	THEN
2685	dopr_index(i) = 48
2686	dopr_unit(i) = 'kg/kg m/s'
2687	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2688	ELSEIF( humidity .AND. cloud_physics ) THEN
2689	dopr_index(i) = 51
2690	dopr_unit(i) = 'kg/kg m/s'
2691	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2692	ELSE
2693	message_string = 'data_output_pr = ' // &
2694	TRIM( data_output_pr(i) ) // ' is not imp' // &
2695	'lemented for cloud_physics = .FALSE. an&' // &
2696	'd humidity = .FALSE.'
2697	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2698	ENDIF
2699
2700	CASE ( 'wqv' )
2701	IF ( humidity .AND. .NOT. cloud_physics ) &
2702	THEN
2703	dopr_index(i) = 49
2704	dopr_unit(i) = 'kg/kg m/s'
2705	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2706	ELSEIF( humidity .AND. cloud_physics ) THEN
2707	dopr_index(i) = 52
2708	dopr_unit(i) = 'kg/kg m/s'
2709	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2710	ELSE
2711	message_string = 'data_output_pr = ' // &
2712	TRIM( data_output_pr(i) ) // ' is not imp' // &
2713	'lemented for cloud_physics = .FALSE. an&' // &
2714	'd humidity = .FALSE.'
2715	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2716	ENDIF
2717
2718	CASE ( 'wqv' )
2719	IF ( humidity .AND. .NOT. cloud_physics ) &
2720	THEN
2721	dopr_index(i) = 50
2722	dopr_unit(i) = 'kg/kg m/s'
2723	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2724	ELSEIF( humidity .AND. cloud_physics ) THEN
2725	dopr_index(i) = 53
2726	dopr_unit(i) = 'kg/kg m/s'
2727	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2728	ELSE
2729	message_string = 'data_output_pr = ' // &
2730	TRIM( data_output_pr(i) ) // ' is not imp' // &
2731	'lemented for cloud_physics = .FALSE. an&' // &
2732	'd humidity = .FALSE.'
2733	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2734	ENDIF
2735
2736	CASE ( 'ql' )
2737	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2738	message_string = 'data_output_pr = ' // &
2739	TRIM( data_output_pr(i) ) // ' is not imp' // &
2740	'lemented for cloud_physics = .FALSE. or' // &
2741	'&cloud_droplets = .FALSE.'
2742	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2743	ELSE
2744	dopr_index(i) = 54
2745	dopr_unit(i) = 'kg/kg'
2746	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2747	ENDIF
2748
2749	CASE ( 'wuu*:dz' )
2750	dopr_index(i) = 55
2751	dopr_unit(i) = 'm2/s3'
2752	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2753
2754	CASE ( 'wp:dz' )
2755	dopr_index(i) = 56
2756	dopr_unit(i) = 'm2/s3'
2757	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2758
2759	CASE ( 'w"e:dz' )
2760	dopr_index(i) = 57
2761	dopr_unit(i) = 'm2/s3'
2762	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2763
2764
2765	CASE ( 'u"pt"' )
2766	dopr_index(i) = 58
2767	dopr_unit(i) = 'K m/s'
2768	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2769
2770	CASE ( 'upt' )
2771	dopr_index(i) = 59
2772	dopr_unit(i) = 'K m/s'
2773	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2774
2775	CASE ( 'upt_t' )
2776	dopr_index(i) = 60
2777	dopr_unit(i) = 'K m/s'
2778	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2779
2780	CASE ( 'v"pt"' )
2781	dopr_index(i) = 61
2782	dopr_unit(i) = 'K m/s'
2783	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2784
2785	CASE ( 'vpt' )
2786	dopr_index(i) = 62
2787	dopr_unit(i) = 'K m/s'
2788	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2789
2790	CASE ( 'vpt_t' )
2791	dopr_index(i) = 63
2792	dopr_unit(i) = 'K m/s'
2793	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2794
2795	CASE ( 'rho' )
2796	IF ( .NOT. ocean ) THEN
2797	message_string = 'data_output_pr = ' // &
2798	TRIM( data_output_pr(i) ) // ' is not imp' // &
2799	'lemented for ocean = .FALSE.'
2800	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2801	ELSE
2802	dopr_index(i) = 64
2803	dopr_unit(i) = 'kg/m3'
2804	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2805	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2806	dopr_initial_index(i) = 77
2807	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
2808	hom(nzb,2,77,:) = 0.0_wp ! because zu(nzb) is negative
2809	data_output_pr(i) = data_output_pr(i)(2:)
2810	ENDIF
2811	ENDIF
2812
2813	CASE ( 'w"sa"' )
2814	IF ( .NOT. ocean ) THEN
2815	message_string = 'data_output_pr = ' // &
2816	TRIM( data_output_pr(i) ) // ' is not imp' // &
2817	'lemented for ocean = .FALSE.'
2818	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2819	ELSE
2820	dopr_index(i) = 65
2821	dopr_unit(i) = 'psu m/s'
2822	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2823	ENDIF
2824
2825	CASE ( 'wsa' )
2826	IF ( .NOT. ocean ) THEN
2827	message_string = 'data_output_pr = ' // &
2828	TRIM( data_output_pr(i) ) // ' is not imp' // &
2829	'lemented for ocean = .FALSE.'
2830	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2831	ELSE
2832	dopr_index(i) = 66
2833	dopr_unit(i) = 'psu m/s'
2834	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2835	ENDIF
2836
2837	CASE ( 'wsa' )
2838	IF ( .NOT. ocean ) THEN
2839	message_string = 'data_output_pr = ' // &
2840	TRIM( data_output_pr(i) ) // ' is not imp' // &
2841	'lemented for ocean = .FALSE.'
2842	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2843	ELSE
2844	dopr_index(i) = 67
2845	dopr_unit(i) = 'psu m/s'
2846	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2847	ENDIF
2848
2849	CASE ( 'wp' )
2850	dopr_index(i) = 68
2851	dopr_unit(i) = 'm3/s3'
2852	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2853
2854	CASE ( 'w"e' )
2855	dopr_index(i) = 69
2856	dopr_unit(i) = 'm3/s3'
2857	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2858
2859	CASE ( 'q*2' )
2860	IF ( .NOT. humidity ) THEN
2861	message_string = 'data_output_pr = ' // &
2862	TRIM( data_output_pr(i) ) // ' is not imp' // &
2863	'lemented for humidity = .FALSE.'
2864	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2865	ELSE
2866	dopr_index(i) = 70
2867	dopr_unit(i) = 'kg2/kg2'
2868	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2869	ENDIF
2870
2871	CASE ( 'prho' )
2872	IF ( .NOT. ocean ) THEN
2873	message_string = 'data_output_pr = ' // &
2874	TRIM( data_output_pr(i) ) // ' is not imp' // &
2875	'lemented for ocean = .FALSE.'
2876	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2877	ELSE
2878	dopr_index(i) = 71
2879	dopr_unit(i) = 'kg/m3'
2880	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2881	ENDIF
2882
2883	CASE ( 'hyp' )
2884	dopr_index(i) = 72
2885	dopr_unit(i) = 'dbar'
2886	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2887
2888	CASE ( 'nr' )
2889	IF ( .NOT. cloud_physics ) THEN
2890	message_string = 'data_output_pr = ' // &
2891	TRIM( data_output_pr(i) ) // ' is not imp' // &
2892	'lemented for cloud_physics = .FALSE.'
2893	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2894	ELSEIF ( icloud_scheme /= 0 ) THEN
2895	message_string = 'data_output_pr = ' // &
2896	TRIM( data_output_pr(i) ) // ' is not imp' // &
2897	'lemented for cloud_scheme /= seifert_beheng'
2898	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2899	ELSEIF ( .NOT. precipitation ) THEN
2900	message_string = 'data_output_pr = ' // &
2901	TRIM( data_output_pr(i) ) // ' is not imp' // &
2902	'lemented for precipitation = .FALSE.'
2903	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2904	ELSE
2905	dopr_index(i) = 73
2906	dopr_unit(i) = '1/m3'
2907	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2908	ENDIF
2909
2910	CASE ( 'qr' )
2911	IF ( .NOT. cloud_physics ) THEN
2912	message_string = 'data_output_pr = ' // &
2913	TRIM( data_output_pr(i) ) // ' is not imp' // &
2914	'lemented for cloud_physics = .FALSE.'
2915	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2916	ELSEIF ( icloud_scheme /= 0 ) THEN
2917	message_string = 'data_output_pr = ' // &
2918	TRIM( data_output_pr(i) ) // ' is not imp' // &
2919	'lemented for cloud_scheme /= seifert_beheng'
2920	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2921	ELSEIF ( .NOT. precipitation ) THEN
2922	message_string = 'data_output_pr = ' // &
2923	TRIM( data_output_pr(i) ) // ' is not imp' // &
2924	'lemented for precipitation = .FALSE.'
2925	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2926	ELSE
2927	dopr_index(i) = 74
2928	dopr_unit(i) = 'kg/kg'
2929	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2930	ENDIF
2931
2932	CASE ( 'qc' )
2933	IF ( .NOT. cloud_physics ) THEN
2934	message_string = 'data_output_pr = ' // &
2935	TRIM( data_output_pr(i) ) // ' is not imp' // &
2936	'lemented for cloud_physics = .FALSE.'
2937	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2938	ELSEIF ( icloud_scheme /= 0 ) THEN
2939	message_string = 'data_output_pr = ' // &
2940	TRIM( data_output_pr(i) ) // ' is not imp' // &
2941	'lemented for cloud_scheme /= seifert_beheng'
2942	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2943	ELSE
2944	dopr_index(i) = 75
2945	dopr_unit(i) = 'kg/kg'
2946	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2947	ENDIF
2948
2949	CASE ( 'prr' )
2950	IF ( .NOT. cloud_physics ) THEN
2951	message_string = 'data_output_pr = ' // &
2952	TRIM( data_output_pr(i) ) // ' is not imp' // &
2953	'lemented for cloud_physics = .FALSE.'
2954	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2955	ELSEIF ( icloud_scheme /= 0 ) THEN
2956	message_string = 'data_output_pr = ' // &
2957	TRIM( data_output_pr(i) ) // ' is not imp' // &
2958	'lemented for cloud_scheme /= seifert_beheng'
2959	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2960	ELSEIF ( .NOT. precipitation ) THEN
2961	message_string = 'data_output_pr = ' // &
2962	TRIM( data_output_pr(i) ) // ' is not imp' // &
2963	'lemented for precipitation = .FALSE.'
2964	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2965
2966	ELSE
2967	dopr_index(i) = 76
2968	dopr_unit(i) = 'kg/kg m/s'
2969	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2970	ENDIF
2971
2972	CASE ( 'ug' )
2973	dopr_index(i) = 78
2974	dopr_unit(i) = 'm/s'
2975	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
2976
2977	CASE ( 'vg' )
2978	dopr_index(i) = 79
2979	dopr_unit(i) = 'm/s'
2980	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
2981
2982	CASE ( 'w_subs' )
2983	IF ( .NOT. large_scale_subsidence ) THEN
2984	message_string = 'data_output_pr = ' // &
2985	TRIM( data_output_pr(i) ) // ' is not imp' // &
2986	'lemented for large_scale_subsidence = .FALSE.'
2987	CALL message( 'check_parameters', 'PA0382', 1, 2, 0, 6, 0 )
2988	ELSE
2989	dopr_index(i) = 80
2990	dopr_unit(i) = 'm/s'
2991	hom(:,2,80,:) = SPREAD( zu, 2, statistic_regions+1 )
2992	ENDIF
2993
2994	CASE ( 'td_lsa_lpt' )
2995	IF ( .NOT. large_scale_forcing ) THEN
2996	message_string = 'data_output_pr = ' // &
2997	TRIM( data_output_pr(i) ) // ' is not imp' // &
2998	'lemented for large_scale_forcing = .FALSE.'
2999	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
3000	ELSE
3001	dopr_index(i) = 81
3002	dopr_unit(i) = 'K/s'
3003	hom(:,2,81,:) = SPREAD( zu, 2, statistic_regions+1 )
3004	ENDIF
3005
3006	CASE ( 'td_lsa_q' )
3007	IF ( .NOT. large_scale_forcing ) THEN
3008	message_string = 'data_output_pr = ' // &
3009	TRIM( data_output_pr(i) ) // ' is not imp' // &
3010	'lemented for large_scale_forcing = .FALSE.'
3011	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
3012	ELSE
3013	dopr_index(i) = 82
3014	dopr_unit(i) = 'kg/kgs'
3015	hom(:,2,82,:) = SPREAD( zu, 2, statistic_regions+1 )
3016	ENDIF
3017
3018	CASE ( 'td_sub_lpt' )
3019	IF ( .NOT. large_scale_forcing ) THEN
3020	message_string = 'data_output_pr = ' // &
3021	TRIM( data_output_pr(i) ) // ' is not imp' // &
3022	'lemented for large_scale_forcing = .FALSE.'
3023	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
3024	ELSE
3025	dopr_index(i) = 83
3026	dopr_unit(i) = 'K/s'
3027	hom(:,2,83,:) = SPREAD( zu, 2, statistic_regions+1 )
3028	ENDIF
3029
3030	CASE ( 'td_sub_q' )
3031	IF ( .NOT. large_scale_forcing ) THEN
3032	message_string = 'data_output_pr = ' // &
3033	TRIM( data_output_pr(i) ) // ' is not imp' // &
3034	'lemented for large_scale_forcing = .FALSE.'
3035	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
3036	ELSE
3037	dopr_index(i) = 84
3038	dopr_unit(i) = 'kg/kgs'
3039	hom(:,2,84,:) = SPREAD( zu, 2, statistic_regions+1 )
3040	ENDIF
3041
3042	CASE ( 'td_nud_lpt' )
3043	IF ( .NOT. nudging ) THEN
3044	message_string = 'data_output_pr = ' // &
3045	TRIM( data_output_pr(i) ) // ' is not imp' // &
3046	'lemented for nudging = .FALSE.'
3047	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
3048	ELSE
3049	dopr_index(i) = 85
3050	dopr_unit(i) = 'K/s'
3051	hom(:,2,85,:) = SPREAD( zu, 2, statistic_regions+1 )
3052	ENDIF
3053
3054	CASE ( 'td_nud_q' )
3055	IF ( .NOT. nudging ) THEN
3056	message_string = 'data_output_pr = ' // &
3057	TRIM( data_output_pr(i) ) // ' is not imp' // &
3058	'lemented for nudging = .FALSE.'
3059	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
3060	ELSE
3061	dopr_index(i) = 86
3062	dopr_unit(i) = 'kg/kgs'
3063	hom(:,2,86,:) = SPREAD( zu, 2, statistic_regions+1 )
3064	ENDIF
3065
3066	CASE ( 'td_nud_u' )
3067	IF ( .NOT. nudging ) THEN
3068	message_string = 'data_output_pr = ' // &
3069	TRIM( data_output_pr(i) ) // ' is not imp' // &
3070	'lemented for nudging = .FALSE.'
3071	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
3072	ELSE
3073	dopr_index(i) = 87
3074	dopr_unit(i) = 'm/s2'
3075	hom(:,2,87,:) = SPREAD( zu, 2, statistic_regions+1 )
3076	ENDIF
3077
3078	CASE ( 'td_nud_v' )
3079	IF ( .NOT. nudging ) THEN
3080	message_string = 'data_output_pr = ' // &
3081	TRIM( data_output_pr(i) ) // ' is not imp' // &
3082	'lemented for nudging = .FALSE.'
3083	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
3084	ELSE
3085	dopr_index(i) = 88
3086	dopr_unit(i) = 'm/s2'
3087	hom(:,2,88,:) = SPREAD( zu, 2, statistic_regions+1 )
3088	ENDIF
3089
3090	CASE ( 't_soil', '#t_soil' )
3091	IF ( .NOT. land_surface ) THEN
3092	message_string = 'data_output_pr = ' // &
3093	TRIM( data_output_pr(i) ) // ' is not imp' // &
3094	'lemented for land_surface = .FALSE.'
3095	CALL message( 'check_parameters', 'PA0402', 1, 2, 0, 6, 0 )
3096	ELSE
3097	dopr_index(i) = 89
3098	dopr_unit(i) = 'K'
3099	hom(0:nzs-1,2,89,:) = SPREAD( - zs, 2, statistic_regions+1 )
3100	IF ( data_output_pr(i)(1:1) == '#' ) THEN
3101	dopr_initial_index(i) = 90
3102	hom(0:nzs-1,2,90,:) = SPREAD( - zs, 2, statistic_regions+1 )
3103	data_output_pr(i) = data_output_pr(i)(2:)
3104	ENDIF
3105	ENDIF
3106
3107	CASE ( 'm_soil', '#m_soil' )
3108	IF ( .NOT. land_surface ) THEN
3109	message_string = 'data_output_pr = ' // &
3110	TRIM( data_output_pr(i) ) // ' is not imp' // &
3111	'lemented for land_surface = .FALSE.'
3112	CALL message( 'check_parameters', 'PA0402', 1, 2, 0, 6, 0 )
3113	ELSE
3114	dopr_index(i) = 91
3115	dopr_unit(i) = 'm3/m3'
3116	hom(0:nzs-1,2,91,:) = SPREAD( - zs, 2, statistic_regions+1 )
3117	IF ( data_output_pr(i)(1:1) == '#' ) THEN
3118	dopr_initial_index(i) = 92
3119	hom(0:nzs-1,2,92,:) = SPREAD( - zs, 2, statistic_regions+1 )
3120	data_output_pr(i) = data_output_pr(i)(2:)
3121	ENDIF
3122	ENDIF
3123
3124	CASE ( 'rad_net' )
3125	IF ( (.NOT. radiation) .OR. radiation_scheme == 'constant' ) THEN
3126	message_string = 'data_output_pr = ' // &
3127	TRIM( data_output_pr(i) ) // ' is not ava' // &
3128	'lable for radiation = .FALSE. or ' // &
3129	'radiation_scheme = "constant"'
3130	CALL message( 'check_parameters', 'PA0408', 1, 2, 0, 6, 0 )
3131	ELSE
3132	dopr_index(i) = 101
3133	dopr_unit(i) = 'W/m2'
3134	hom(:,2,101,:) = SPREAD( zw, 2, statistic_regions+1 )
3135	ENDIF
3136
3137	CASE ( 'rad_lw_in' )
3138	IF ( (.NOT. radiation) .OR. radiation_scheme == 'constant' ) THEN
3139	message_string = 'data_output_pr = ' // &
3140	TRIM( data_output_pr(i) ) // ' is not ava' // &
3141	'lable for radiation = .FALSE. or ' // &
3142	'radiation_scheme = "constant"'
3143	CALL message( 'check_parameters', 'PA0408', 1, 2, 0, 6, 0 )
3144	ELSE
3145	dopr_index(i) = 102
3146	dopr_unit(i) = 'W/m2'
3147	hom(:,2,102,:) = SPREAD( zw, 2, statistic_regions+1 )
3148	ENDIF
3149
3150	CASE ( 'rad_lw_out' )
3151	IF ( (.NOT. radiation) .OR. radiation_scheme == 'constant' ) THEN
3152	message_string = 'data_output_pr = ' // &
3153	TRIM( data_output_pr(i) ) // ' is not ava' // &
3154	'lable for radiation = .FALSE. or ' // &
3155	'radiation_scheme = "constant"'
3156	CALL message( 'check_parameters', 'PA0408', 1, 2, 0, 6, 0 )
3157	ELSE
3158	dopr_index(i) = 103
3159	dopr_unit(i) = 'W/m2'
3160	hom(:,2,103,:) = SPREAD( zw, 2, statistic_regions+1 )
3161	ENDIF
3162
3163	CASE ( 'rad_sw_in' )
3164	IF ( (.NOT. radiation) .OR. radiation_scheme == 'constant' ) THEN
3165	message_string = 'data_output_pr = ' // &
3166	TRIM( data_output_pr(i) ) // ' is not ava' // &
3167	'lable for radiation = .FALSE. or ' // &
3168	'radiation_scheme = "constant"'
3169	CALL message( 'check_parameters', 'PA0408', 1, 2, 0, 6, 0 )
3170	ELSE
3171	dopr_index(i) = 104
3172	dopr_unit(i) = 'W/m2'
3173	hom(:,2,104,:) = SPREAD( zw, 2, statistic_regions+1 )
3174	ENDIF
3175
3176	CASE ( 'rad_sw_out')
3177	IF ( (.NOT. radiation) .OR. radiation_scheme == 'constant' ) THEN
3178	message_string = 'data_output_pr = ' // &
3179	TRIM( data_output_pr(i) ) // ' is not ava' // &
3180	'lable for radiation = .FALSE. or ' // &
3181	'radiation_scheme = "constant"'
3182	CALL message( 'check_parameters', 'PA0408', 1, 2, 0, 6, 0 )
3183	ELSE
3184	dopr_index(i) = 105
3185	dopr_unit(i) = 'W/m2'
3186	hom(:,2,105,:) = SPREAD( zw, 2, statistic_regions+1 )
3187	ENDIF
3188
3189	CASE ( 'rad_lw_cs_hr' )
3190	IF ( (.NOT. radiation) .OR. radiation_scheme /= 'rrtmg' ) THEN
3191	message_string = 'data_output_pr = ' // &
3192	TRIM( data_output_pr(i) ) // ' is not ava' // &
3193	'lable for radiation = .FALSE. or ' // &
3194	'radiation_scheme /= "rrtmg"'
3195	CALL message( 'check_parameters', 'PA0413', 1, 2, 0, 6, 0 )
3196	ELSE
3197	dopr_index(i) = 106
3198	dopr_unit(i) = 'K/h'
3199	hom(:,2,106,:) = SPREAD( zu, 2, statistic_regions+1 )
3200	ENDIF
3201
3202	CASE ( 'rad_lw_hr' )
3203	IF ( (.NOT. radiation) .OR. radiation_scheme /= 'rrtmg' ) THEN
3204	message_string = 'data_output_pr = ' // &
3205	TRIM( data_output_pr(i) ) // ' is not ava' // &
3206	'lable for radiation = .FALSE. or ' // &
3207	'radiation_scheme /= "rrtmg"'
3208	CALL message( 'check_parameters', 'PA0413', 1, 2, 0, 6, 0 )
3209	ELSE
3210	dopr_index(i) = 107
3211	dopr_unit(i) = 'K/h'
3212	hom(:,2,107,:) = SPREAD( zu, 2, statistic_regions+1 )
3213	ENDIF
3214
3215	CASE ( 'rad_sw_cs_hr' )
3216	IF ( (.NOT. radiation) .OR. radiation_scheme /= 'rrtmg' ) THEN
3217	message_string = 'data_output_pr = ' // &
3218	TRIM( data_output_pr(i) ) // ' is not ava' // &
3219	'lable for radiation = .FALSE. or ' // &
3220	'radiation_scheme /= "rrtmg"'
3221	CALL message( 'check_parameters', 'PA0413', 1, 2, 0, 6, 0 )
3222	ELSE
3223	dopr_index(i) = 108
3224	dopr_unit(i) = 'K/h'
3225	hom(:,2,108,:) = SPREAD( zu, 2, statistic_regions+1 )
3226	ENDIF
3227
3228	CASE ( 'rad_sw_hr' )
3229	IF ( (.NOT. radiation) .OR. radiation_scheme /= 'rrtmg' ) THEN
3230	message_string = 'data_output_pr = ' // &
3231	TRIM( data_output_pr(i) ) // ' is not ava' // &
3232	'lable for radiation = .FALSE. or ' // &
3233	'radiation_scheme /= "rrtmg"'
3234	CALL message( 'check_parameters', 'PA0413', 1, 2, 0, 6, 0 )
3235	ELSE
3236	dopr_index(i) = 109
3237	dopr_unit(i) = 'K/h'
3238	hom(:,2,109,:) = SPREAD( zu, 2, statistic_regions+1 )
3239	ENDIF
3240
3241	CASE DEFAULT
3242
3243	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
3244
3245	IF ( unit == 'illegal' ) THEN
3246	IF ( data_output_pr_user(1) /= ' ' ) THEN
3247	message_string = 'illegal value for data_output_pr or ' // &
3248	'data_output_pr_user = "' // &
3249	TRIM( data_output_pr(i) ) // '"'
3250	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
3251	ELSE
3252	message_string = 'illegal value for data_output_pr = "' // &
3253	TRIM( data_output_pr(i) ) // '"'
3254	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
3255	ENDIF
3256	ENDIF
3257
3258	END SELECT
3259
3260	ENDDO
3261
3262
3263	!
3264	!-- Append user-defined data output variables to the standard data output
3265	IF ( data_output_user(1) /= ' ' ) THEN
3266	i = 1
3267	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
3268	i = i + 1
3269	ENDDO
3270	j = 1
3271	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
3272	IF ( i > 100 ) THEN
3273	message_string = 'number of output quantitities given by data' // &
3274	'_output and data_output_user exceeds the limit of 100'
3275	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
3276	ENDIF
3277	data_output(i) = data_output_user(j)
3278	i = i + 1
3279	j = j + 1
3280	ENDDO
3281	ENDIF
3282
3283	!
3284	!-- Check and set steering parameters for 2d/3d data output and averaging
3285	i = 1
3286	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
3287	!
3288	!-- Check for data averaging
3289	ilen = LEN_TRIM( data_output(i) )
3290	j = 0 ! no data averaging
3291	IF ( ilen > 3 ) THEN
3292	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
3293	j = 1 ! data averaging
3294	data_output(i) = data_output(i)(1:ilen-3)
3295	ENDIF
3296	ENDIF
3297	!
3298	!-- Check for cross section or volume data
3299	ilen = LEN_TRIM( data_output(i) )
3300	k = 0 ! 3d data
3301	var = data_output(i)(1:ilen)
3302	IF ( ilen > 3 ) THEN
3303	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
3304	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
3305	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3306	k = 1 ! 2d data
3307	var = data_output(i)(1:ilen-3)
3308	ENDIF
3309	ENDIF
3310
3311	!
3312	!-- Check for allowed value and set units
3313	SELECT CASE ( TRIM( var ) )
3314
3315	CASE ( 'e' )
3316	IF ( constant_diffusion ) THEN
3317	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3318	'res constant_diffusion = .FALSE.'
3319	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
3320	ENDIF
3321	unit = 'm2/s2'
3322
3323	CASE ( 'lpt' )
3324	IF ( .NOT. cloud_physics ) THEN
3325	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3326	'res cloud_physics = .TRUE.'
3327	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
3328	ENDIF
3329	unit = 'K'
3330
3331	CASE ( 'm_soil' )
3332	IF ( .NOT. land_surface ) THEN
3333	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3334	'land_surface = .TRUE.'
3335	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3336	ENDIF
3337	unit = 'm3/m3'
3338
3339	CASE ( 'nr' )
3340	IF ( .NOT. cloud_physics ) THEN
3341	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3342	'res cloud_physics = .TRUE.'
3343	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
3344	ELSEIF ( icloud_scheme /= 0 ) THEN
3345	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3346	'res cloud_scheme = seifert_beheng'
3347	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
3348	ENDIF
3349	unit = '1/m3'
3350
3351	CASE ( 'pc', 'pr' )
3352	IF ( .NOT. particle_advection ) THEN
3353	message_string = 'output of "' // TRIM( var ) // '" requir' // &
3354	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
3355	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
3356	ENDIF
3357	IF ( TRIM( var ) == 'pc' ) unit = 'number'
3358	IF ( TRIM( var ) == 'pr' ) unit = 'm'
3359
3360	CASE ( 'prr' )
3361	IF ( .NOT. cloud_physics ) THEN
3362	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3363	'res cloud_physics = .TRUE.'
3364	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
3365	ELSEIF ( icloud_scheme /= 0 ) THEN
3366	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3367	'res cloud_scheme = seifert_beheng'
3368	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
3369	ELSEIF ( .NOT. precipitation ) THEN
3370	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3371	'res precipitation = .TRUE.'
3372	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
3373	ENDIF
3374	unit = 'kg/kg m/s'
3375
3376	CASE ( 'q', 'vpt' )
3377	IF ( .NOT. humidity ) THEN
3378	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3379	'res humidity = .TRUE.'
3380	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
3381	ENDIF
3382	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
3383	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
3384
3385	CASE ( 'qc' )
3386	IF ( .NOT. cloud_physics ) THEN
3387	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3388	'res cloud_physics = .TRUE.'
3389	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
3390	ELSEIF ( icloud_scheme /= 0 ) THEN
3391	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3392	'res cloud_scheme = seifert_beheng'
3393	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
3394	ENDIF
3395	unit = 'kg/kg'
3396
3397	CASE ( 'ql' )
3398	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
3399	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3400	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
3401	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
3402	ENDIF
3403	unit = 'kg/kg'
3404
3405	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
3406	IF ( .NOT. cloud_droplets ) THEN
3407	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3408	'res cloud_droplets = .TRUE.'
3409	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
3410	ENDIF
3411	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
3412	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
3413	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
3414
3415	CASE ( 'qr' )
3416	IF ( .NOT. cloud_physics ) THEN
3417	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3418	'res cloud_physics = .TRUE.'
3419	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
3420	ELSEIF ( icloud_scheme /= 0 ) THEN
3421	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3422	'res cloud_scheme = seifert_beheng'
3423	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
3424	ELSEIF ( .NOT. precipitation ) THEN
3425	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3426	'res precipitation = .TRUE.'
3427	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
3428	ENDIF
3429	unit = 'kg/kg'
3430
3431	CASE ( 'qv' )
3432	IF ( .NOT. cloud_physics ) THEN
3433	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3434	'res cloud_physics = .TRUE.'
3435	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
3436	ENDIF
3437	unit = 'kg/kg'
3438
3439	CASE ( 'rad_lw_in', 'rad_lw_out', 'rad_lw_cs_hr', 'rad_lw_hr', &
3440	'rad_sw_in', 'rad_sw_out', 'rad_sw_cs_hr', 'rad_sw_hr' )
3441	IF ( .NOT. radiation .OR. radiation_scheme /= 'rrtmg' ) THEN
3442	message_string = '"output of "' // TRIM( var ) // '" requi' // &
3443	'res radiation = .TRUE. and ' // &
3444	'radiation_scheme = "rrtmg"'
3445	CALL message( 'check_parameters', 'PA0406', 1, 2, 0, 6, 0 )
3446	ENDIF
3447	unit = 'W/m2'
3448
3449	CASE ( 'rho' )
3450	IF ( .NOT. ocean ) THEN
3451	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3452	'res ocean = .TRUE.'
3453	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
3454	ENDIF
3455	unit = 'kg/m3'
3456
3457	CASE ( 's' )
3458	IF ( .NOT. passive_scalar ) THEN
3459	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3460	'res passive_scalar = .TRUE.'
3461	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
3462	ENDIF
3463	unit = 'conc'
3464
3465	CASE ( 'sa' )
3466	IF ( .NOT. ocean ) THEN
3467	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3468	'res ocean = .TRUE.'
3469	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
3470	ENDIF
3471	unit = 'psu'
3472
3473	CASE ( 't_soil' )
3474	IF ( .NOT. land_surface ) THEN
3475	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3476	'land_surface = .TRUE.'
3477	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3478	ENDIF
3479	unit = 'K'
3480
3481
3482	CASE ( 'c_liq', 'c_soil', 'c_veg', 'ghf_eb', 'lai', 'lwp', &
3483	'm_liq_eb', 'ol', 'pra', 'prr', 'qsws', 'qsws_eb', &
3484	'qsws_liq_eb', 'qsws_soil_eb', 'qsws_veg_eb', 'rad_net', &
3485	'rrtm_aldif', 'rrtm_aldir', 'rrtm_asdif', 'rrtm_asdir', &
3486	'r_a', 'r_s', 'shf', 'shf_eb', 't', 'u', 'z0', 'z0h' )
3487	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
3488	message_string = 'illegal value for data_output: "' // &
3489	TRIM( var ) // '" & only 2d-horizontal ' // &
3490	'cross sections are allowed for this value'
3491	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
3492	ENDIF
3493	IF ( .NOT. radiation .OR. radiation_scheme /= "rrtmg" ) THEN
3494	IF ( TRIM( var ) == 'rrtm_aldif*' .OR. &
3495	TRIM( var ) == 'rrtm_aldir*' .OR. &
3496	TRIM( var ) == 'rrtm_asdif*' .OR. &
3497	TRIM( var ) == 'rrtm_asdir*' ) &
3498	THEN
3499	message_string = 'output of "' // TRIM( var ) // '" require'&
3500	// 's radiation = .TRUE. and radiation_sch'&
3501	// 'eme = "rrtmg"'
3502	CALL message( 'check_parameters', 'PA0409', 1, 2, 0, 6, 0 )
3503	ENDIF
3504	ENDIF
3505
3506	IF ( TRIM( var ) == 'c_liq*' .AND. .NOT. land_surface ) THEN
3507	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3508	'res land_surface = .TRUE.'
3509	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3510	ENDIF
3511	IF ( TRIM( var ) == 'c_soil*' .AND. .NOT. land_surface ) THEN
3512	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3513	'res land_surface = .TRUE.'
3514	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3515	ENDIF
3516	IF ( TRIM( var ) == 'c_veg*' .AND. .NOT. land_surface ) THEN
3517	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3518	'res land_surface = .TRUE.'
3519	CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 )
3520	ENDIF
3521	IF ( TRIM( var ) == 'ghf_eb*' .AND. .NOT. land_surface ) THEN
3522	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3523	'res land_surface = .TRUE.'
3524	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3525	ENDIF
3526	IF ( TRIM( var ) == 'lai*' .AND. .NOT. land_surface ) THEN
3527	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3528	'res land_surface = .TRUE.'
3529	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3530	ENDIF
3531	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
3532	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3533	'res cloud_physics = .TRUE.'
3534	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
3535	ENDIF
3536	IF ( TRIM( var ) == 'm_liq_eb*' .AND. .NOT. land_surface ) THEN
3537	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3538	'res land_surface = .TRUE.'
3539	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3540	ENDIF
3541	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
3542	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3543	'res precipitation = .TRUE.'
3544	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
3545	ENDIF
3546	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
3547	message_string = 'temporal averaging of precipitation ' // &
3548	'amount "' // TRIM( var ) // '" is not possible'
3549	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
3550	ENDIF
3551	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
3552	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3553	'res precipitation = .TRUE.'
3554	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
3555	ENDIF
3556	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
3557	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3558	'res humidity = .TRUE.'
3559	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
3560	ENDIF
3561	IF ( TRIM( var ) == 'qsws_eb*' .AND. .NOT. land_surface ) THEN
3562	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3563	'res land_surface = .TRUE.'
3564	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3565	ENDIF
3566	IF ( TRIM( var ) == 'qsws_liq_eb*' .AND. .NOT. land_surface ) &
3567	THEN
3568	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3569	'res land_surface = .TRUE.'
3570	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3571	ENDIF
3572	IF ( TRIM( var ) == 'qsws_soil_eb*' .AND. .NOT. land_surface ) &
3573	THEN
3574	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3575	'res land_surface = .TRUE.'
3576	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3577	ENDIF
3578	IF ( TRIM( var ) == 'qsws_veg_eb*' .AND. .NOT. land_surface ) &
3579	THEN
3580	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3581	'res land_surface = .TRUE.'
3582	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3583	ENDIF
3584	IF ( TRIM( var ) == 'r_a*' .AND. .NOT. land_surface ) &
3585	THEN
3586	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3587	'res land_surface = .TRUE.'
3588	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3589	ENDIF
3590	IF ( TRIM( var ) == 'r_s*' .AND. .NOT. land_surface ) &
3591	THEN
3592	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3593	'res land_surface = .TRUE.'
3594	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
3595	ENDIF
3596
3597	IF ( TRIM( var ) == 'c_liq*' ) unit = 'none'
3598	IF ( TRIM( var ) == 'c_soil*') unit = 'none'
3599	IF ( TRIM( var ) == 'c_veg*' ) unit = 'none'
3600	IF ( TRIM( var ) == 'ghf_eb*') unit = 'W/m2'
3601	IF ( TRIM( var ) == 'lai*' ) unit = 'none'
3602	IF ( TRIM( var ) == 'lwp*' ) unit = 'kg/m2'
3603	IF ( TRIM( var ) == 'm_liq_eb*' ) unit = 'm'
3604	IF ( TRIM( var ) == 'ol*' ) unit = 'm'
3605	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
3606	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
3607	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
3608	IF ( TRIM( var ) == 'qsws_eb*' ) unit = 'W/m2'
3609	IF ( TRIM( var ) == 'qsws_liq_eb*' ) unit = 'W/m2'
3610	IF ( TRIM( var ) == 'qsws_soil_eb*' ) unit = 'W/m2'
3611	IF ( TRIM( var ) == 'qsws_veg_eb*' ) unit = 'W/m2'
3612	IF ( TRIM( var ) == 'rad_net*' ) unit = 'W/m2'
3613	IF ( TRIM( var ) == 'rrtm_aldif*' ) unit = ''
3614	IF ( TRIM( var ) == 'rrtm_aldir*' ) unit = ''
3615	IF ( TRIM( var ) == 'rrtm_asdif*' ) unit = ''
3616	IF ( TRIM( var ) == 'rrtm_asdir*' ) unit = ''
3617	IF ( TRIM( var ) == 'r_a*') unit = 's/m'
3618	IF ( TRIM( var ) == 'r_s*') unit = 's/m'
3619	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
3620	IF ( TRIM( var ) == 'shf_eb*') unit = 'W/m2'
3621	IF ( TRIM( var ) == 't*' ) unit = 'K'
3622	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
3623	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
3624	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
3625
3626
3627	CASE ( 'p', 'pt', 'u', 'v', 'w' )
3628	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
3629	IF ( TRIM( var ) == 'pt' ) unit = 'K'
3630	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
3631	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
3632	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
3633	CONTINUE
3634
3635	CASE DEFAULT
3636
3637	CALL user_check_data_output( var, unit )
3638
3639	IF ( unit == 'illegal' ) THEN
3640	IF ( data_output_user(1) /= ' ' ) THEN
3641	message_string = 'illegal value for data_output or ' // &
3642	'data_output_user = "' // TRIM( data_output(i) ) // '"'
3643	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
3644	ELSE
3645	message_string = 'illegal value for data_output = "' // &
3646	TRIM( data_output(i) ) // '"'
3647	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
3648	ENDIF
3649	ENDIF
3650
3651	END SELECT
3652	!
3653	!-- Set the internal steering parameters appropriately
3654	IF ( k == 0 ) THEN
3655	do3d_no(j) = do3d_no(j) + 1
3656	do3d(j,do3d_no(j)) = data_output(i)
3657	do3d_unit(j,do3d_no(j)) = unit
3658	ELSE
3659	do2d_no(j) = do2d_no(j) + 1
3660	do2d(j,do2d_no(j)) = data_output(i)
3661	do2d_unit(j,do2d_no(j)) = unit
3662	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
3663	data_output_xy(j) = .TRUE.
3664	ENDIF
3665	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
3666	data_output_xz(j) = .TRUE.
3667	ENDIF
3668	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3669	data_output_yz(j) = .TRUE.
3670	ENDIF
3671	ENDIF
3672
3673	IF ( j == 1 ) THEN
3674	!
3675	!-- Check, if variable is already subject to averaging
3676	found = .FALSE.
3677	DO k = 1, doav_n
3678	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
3679	ENDDO
3680
3681	IF ( .NOT. found ) THEN
3682	doav_n = doav_n + 1
3683	doav(doav_n) = var
3684	ENDIF
3685	ENDIF
3686
3687	i = i + 1
3688	ENDDO
3689
3690	!
3691	!-- Averaged 2d or 3d output requires that an averaging interval has been set
3692	IF ( doav_n > 0 .AND. averaging_interval == 0.0_wp ) THEN
3693	WRITE( message_string, * ) 'output of averaged quantity "', &
3694	TRIM( doav(1) ), '_av" requires to set a ', &
3695	'non-zero & averaging interval'
3696	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
3697	ENDIF
3698
3699	!
3700	!-- Check sectional planes and store them in one shared array
3701	IF ( ANY( section_xy > nz + 1 ) ) THEN
3702	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3703	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3704	ENDIF
3705	IF ( ANY( section_xz > ny + 1 ) ) THEN
3706	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3707	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3708	ENDIF
3709	IF ( ANY( section_yz > nx + 1 ) ) THEN
3710	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3711	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3712	ENDIF
3713	section(:,1) = section_xy
3714	section(:,2) = section_xz
3715	section(:,3) = section_yz
3716
3717	!
3718	!-- Upper plot limit for 2D vertical sections
3719	IF ( z_max_do2d == -1.0_wp ) z_max_do2d = zu(nzt)
3720	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3721	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3722	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3723	' (zu(nzt))'
3724	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3725	ENDIF
3726
3727	!
3728	!-- Upper plot limit for 3D arrays
3729	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3730
3731	!
3732	!-- Set output format string (used in header)
3733	SELECT CASE ( netcdf_data_format )
3734	CASE ( 1 )
3735	output_format_netcdf = 'netCDF classic'
3736	CASE ( 2 )
3737	output_format_netcdf = 'netCDF 64bit offset'
3738	CASE ( 3 )
3739	output_format_netcdf = 'netCDF4/HDF5'
3740	CASE ( 4 )
3741	output_format_netcdf = 'netCDF4/HDF5 classic'
3742	CASE ( 5 )
3743	output_format_netcdf = 'parallel netCDF4/HDF5'
3744	CASE ( 6 )
3745	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3746
3747	END SELECT
3748
3749	#if defined( __spectra )
3750	!
3751	!-- Check the number of spectra level to be output
3752	i = 1
3753	DO WHILE ( comp_spectra_level(i) /= 999999 .AND. i <= 100 )
3754	i = i + 1
3755	ENDDO
3756	i = i - 1
3757	IF ( i == 0 ) THEN
3758	WRITE( message_string, * ) 'no spectra levels given'
3759	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
3760	ENDIF
3761	#endif
3762
3763	!
3764	!-- Check mask conditions
3765	DO mid = 1, max_masks
3766	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3767	data_output_masks_user(mid,1) /= ' ' ) THEN
3768	masks = masks + 1
3769	ENDIF
3770	ENDDO
3771
3772	IF ( masks < 0 .OR. masks > max_masks ) THEN
3773	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3774	'<= ', max_masks, ' (=max_masks)'
3775	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3776	ENDIF
3777	IF ( masks > 0 ) THEN
3778	mask_scale(1) = mask_scale_x
3779	mask_scale(2) = mask_scale_y
3780	mask_scale(3) = mask_scale_z
3781	IF ( ANY( mask_scale <= 0.0_wp ) ) THEN
3782	WRITE( message_string, * ) &
3783	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3784	'must be > 0.0'
3785	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3786	ENDIF
3787	!
3788	!-- Generate masks for masked data output
3789	!-- Parallel netcdf output is not tested so far for masked data, hence
3790	!-- netcdf_data_format is switched back to non-paralell output.
3791	netcdf_data_format_save = netcdf_data_format
3792	IF ( netcdf_data_format > 4 ) THEN
3793	IF ( netcdf_data_format == 5 ) netcdf_data_format = 3
3794	IF ( netcdf_data_format == 6 ) netcdf_data_format = 4
3795	message_string = 'netCDF file formats '// &
3796	'5 (parallel netCDF 4) and ' // &
3797	'6 (parallel netCDF 4 Classic model) '// &
3798	'&are currently not supported (not yet tested) ' // &
3799	'for masked data.&Using respective non-parallel' // &
3800	' output for masked data.'
3801	CALL message( 'check_parameters', 'PA0383', 0, 0, 0, 6, 0 )
3802	ENDIF
3803	CALL init_masks
3804	netcdf_data_format = netcdf_data_format_save
3805	ENDIF
3806
3807	!
3808	!-- Check the NetCDF data format
3809	#if ! defined ( __check )
3810	IF ( netcdf_data_format > 2 ) THEN
3811	#if defined( __netcdf4 )
3812	CONTINUE
3813	#else
3814	message_string = 'netCDF: netCDF4 format requested but no ' // &
3815	'cpp-directive __netcdf4 given & switch ' // &
3816	'back to 64-bit offset format'
3817	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3818	netcdf_data_format = 2
3819	#endif
3820	ENDIF
3821	IF ( netcdf_data_format > 4 ) THEN
3822	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3823	CONTINUE
3824	#else
3825	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3826	'cpp-directive __netcdf4_parallel given & switch ' // &
3827	'back to netCDF4 non-parallel output'
3828	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3829	netcdf_data_format = netcdf_data_format - 2
3830	#endif
3831	ENDIF
3832	#endif
3833
3834	!
3835	!-- Calculate fixed number of output time levels for parallel netcdf output.
3836	!-- The time dimension has to be defined as limited for parallel output,
3837	!-- because otherwise the I/O performance drops significantly.
3838	IF ( netcdf_data_format > 4 ) THEN
3839
3840	!
3841	!-- Check if any of the follwoing data output interval is 0.0s, which is
3842	!-- not allowed for parallel output.
3843	CALL check_dt_do( dt_do3d, 'dt_do3d' )
3844	CALL check_dt_do( dt_do2d_xy, 'dt_do2d_xy' )
3845	CALL check_dt_do( dt_do2d_xz, 'dt_do2d_xz' )
3846	CALL check_dt_do( dt_do2d_yz, 'dt_do2d_yz' )
3847
3848	ntdim_3d(0) = INT( ( end_time - skip_time_do3d ) / dt_do3d )
3849	IF ( do3d_at_begin ) ntdim_3d(0) = ntdim_3d(0) + 1
3850	ntdim_3d(1) = INT( ( end_time - skip_time_data_output_av ) &
3851	/ dt_data_output_av )
3852	ntdim_2d_xy(0) = INT( ( end_time - skip_time_do2d_xy ) / dt_do2d_xy )
3853	ntdim_2d_xz(0) = INT( ( end_time - skip_time_do2d_xz ) / dt_do2d_xz )
3854	ntdim_2d_yz(0) = INT( ( end_time - skip_time_do2d_yz ) / dt_do2d_yz )
3855	IF ( do2d_at_begin ) THEN
3856	ntdim_2d_xy(0) = ntdim_2d_xy(0) + 1
3857	ntdim_2d_xz(0) = ntdim_2d_xz(0) + 1
3858	ntdim_2d_yz(0) = ntdim_2d_yz(0) + 1
3859	ENDIF
3860	ntdim_2d_xy(1) = ntdim_3d(1)
3861	ntdim_2d_xz(1) = ntdim_3d(1)
3862	ntdim_2d_yz(1) = ntdim_3d(1)
3863	write(9,*) "ntdim_3d(av)=",ntdim_3d(0)
3864	CALL local_flush(9)
3865	ENDIF
3866
3867	#if ! defined( __check )
3868	!
3869	!-- Check netcdf precison
3870	ldum = .FALSE.
3871	CALL define_netcdf_header( 'ch', ldum, 0 )
3872	#endif
3873	!
3874	!-- Check, whether a constant diffusion coefficient shall be used
3875	IF ( km_constant /= -1.0_wp ) THEN
3876	IF ( km_constant < 0.0_wp ) THEN
3877	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3878	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3879	ELSE
3880	IF ( prandtl_number < 0.0_wp ) THEN
3881	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3882	' < 0.0'
3883	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3884	ENDIF
3885	constant_diffusion = .TRUE.
3886
3887	IF ( constant_flux_layer ) THEN
3888	message_string = 'constant_flux_layer is not allowed with fixed ' &
3889	// 'value of km'
3890	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3891	ENDIF
3892	ENDIF
3893	ENDIF
3894
3895	!
3896	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3897	!-- potential temperature, check the width of the damping layer
3898	IF ( bc_lr /= 'cyclic' ) THEN
3899	IF ( pt_damping_width < 0.0_wp .OR. &
3900	pt_damping_width > REAL( nx * dx ) ) THEN
3901	message_string = 'pt_damping_width out of range'
3902	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3903	ENDIF
3904	ENDIF
3905
3906	IF ( bc_ns /= 'cyclic' ) THEN
3907	IF ( pt_damping_width < 0.0_wp .OR. &
3908	pt_damping_width > REAL( ny * dy ) ) THEN
3909	message_string = 'pt_damping_width out of range'
3910	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3911	ENDIF
3912	ENDIF
3913
3914	!
3915	!-- Check value range for zeta = z/L
3916	IF ( zeta_min >= zeta_max ) THEN
3917	WRITE( message_string, * ) 'zeta_min = ', zeta_min, ' must be less ', &
3918	'than zeta_max = ', zeta_max
3919	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3920	ENDIF
3921
3922	!
3923	!-- Check random generator
3924	IF ( (random_generator /= 'system-specific' .AND. &
3925	random_generator /= 'random-parallel' ) .AND. &
3926	random_generator /= 'numerical-recipes' ) THEN
3927	message_string = 'unknown random generator: random_generator = "' // &
3928	TRIM( random_generator ) // '"'
3929	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3930	ENDIF
3931
3932	!
3933	!-- Determine upper and lower hight level indices for random perturbations
3934	IF ( disturbance_level_b == -9999999.9_wp ) THEN
3935	IF ( ocean ) THEN
3936	disturbance_level_b = zu((nzt*2)/3)
3937	disturbance_level_ind_b = ( nzt * 2 ) / 3
3938	ELSE
3939	disturbance_level_b = zu(nzb+3)
3940	disturbance_level_ind_b = nzb + 3
3941	ENDIF
3942	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3943	WRITE( message_string, * ) 'disturbance_level_b = ', &
3944	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3945	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3946	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3947	WRITE( message_string, * ) 'disturbance_level_b = ', &
3948	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3949	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3950	ELSE
3951	DO k = 3, nzt-2
3952	IF ( disturbance_level_b <= zu(k) ) THEN
3953	disturbance_level_ind_b = k
3954	EXIT
3955	ENDIF
3956	ENDDO
3957	ENDIF
3958
3959	IF ( disturbance_level_t == -9999999.9_wp ) THEN
3960	IF ( ocean ) THEN
3961	disturbance_level_t = zu(nzt-3)
3962	disturbance_level_ind_t = nzt - 3
3963	ELSE
3964	disturbance_level_t = zu(nzt/3)
3965	disturbance_level_ind_t = nzt / 3
3966	ENDIF
3967	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3968	WRITE( message_string, * ) 'disturbance_level_t = ', &
3969	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3970	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3971	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3972	WRITE( message_string, * ) 'disturbance_level_t = ', &
3973	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3974	disturbance_level_b
3975	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3976	ELSE
3977	DO k = 3, nzt-2
3978	IF ( disturbance_level_t <= zu(k) ) THEN
3979	disturbance_level_ind_t = k
3980	EXIT
3981	ENDIF
3982	ENDDO
3983	ENDIF
3984
3985	!
3986	!-- Check again whether the levels determined this way are ok.
3987	!-- Error may occur at automatic determination and too few grid points in
3988	!-- z-direction.
3989	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3990	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3991	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3992	disturbance_level_b
3993	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3994	ENDIF
3995
3996	!
3997	!-- Determine the horizontal index range for random perturbations.
3998	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3999	!-- near the inflow and the perturbation area is further limited to ...(1)
4000	!-- after the initial phase of the flow.
4001
4002	IF ( bc_lr /= 'cyclic' ) THEN
4003	IF ( inflow_disturbance_begin == -1 ) THEN
4004	inflow_disturbance_begin = MIN( 10, nx/2 )
4005	ENDIF
4006	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
4007	THEN
4008	message_string = 'inflow_disturbance_begin out of range'
4009	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
4010	ENDIF
4011	IF ( inflow_disturbance_end == -1 ) THEN
4012	inflow_disturbance_end = MIN( 100, 3*nx/4 )
4013	ENDIF
4014	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
4015	THEN
4016	message_string = 'inflow_disturbance_end out of range'
4017	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
4018	ENDIF
4019	ELSEIF ( bc_ns /= 'cyclic' ) THEN
4020	IF ( inflow_disturbance_begin == -1 ) THEN
4021	inflow_disturbance_begin = MIN( 10, ny/2 )
4022	ENDIF
4023	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
4024	THEN
4025	message_string = 'inflow_disturbance_begin out of range'
4026	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
4027	ENDIF
4028	IF ( inflow_disturbance_end == -1 ) THEN
4029	inflow_disturbance_end = MIN( 100, 3*ny/4 )
4030	ENDIF
4031	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
4032	THEN
4033	message_string = 'inflow_disturbance_end out of range'
4034	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
4035	ENDIF
4036	ENDIF
4037
4038	IF ( random_generator == 'random-parallel' ) THEN
4039	dist_nxl = nxl; dist_nxr = nxr
4040	dist_nys = nys; dist_nyn = nyn
4041	IF ( bc_lr == 'radiation/dirichlet' ) THEN
4042	dist_nxr = MIN( nx - inflow_disturbance_begin, nxr )
4043	dist_nxl(1) = MAX( nx - inflow_disturbance_end, nxl )
4044	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
4045	dist_nxl = MAX( inflow_disturbance_begin, nxl )
4046	dist_nxr(1) = MIN( inflow_disturbance_end, nxr )
4047	ENDIF
4048	IF ( bc_ns == 'dirichlet/radiation' ) THEN
4049	dist_nyn = MIN( ny - inflow_disturbance_begin, nyn )
4050	dist_nys(1) = MAX( ny - inflow_disturbance_end, nys )
4051	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
4052	dist_nys = MAX( inflow_disturbance_begin, nys )
4053	dist_nyn(1) = MIN( inflow_disturbance_end, nyn )
4054	ENDIF
4055	ELSE
4056	dist_nxl = 0; dist_nxr = nx
4057	dist_nys = 0; dist_nyn = ny
4058	IF ( bc_lr == 'radiation/dirichlet' ) THEN
4059	dist_nxr = nx - inflow_disturbance_begin
4060	dist_nxl(1) = nx - inflow_disturbance_end
4061	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
4062	dist_nxl = inflow_disturbance_begin
4063	dist_nxr(1) = inflow_disturbance_end
4064	ENDIF
4065	IF ( bc_ns == 'dirichlet/radiation' ) THEN
4066	dist_nyn = ny - inflow_disturbance_begin
4067	dist_nys(1) = ny - inflow_disturbance_end
4068	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
4069	dist_nys = inflow_disturbance_begin
4070	dist_nyn(1) = inflow_disturbance_end
4071	ENDIF
4072	ENDIF
4073
4074	!
4075	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
4076	!-- boundary (so far, a turbulent inflow is realized from the left side only)
4077	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
4078	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
4079	'condition at the inflow boundary'
4080	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
4081	ENDIF
4082
4083	!
4084	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
4085	!-- data from prerun in the first main run
4086	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
4087	initializing_actions /= 'read_restart_data' ) THEN
4088	message_string = 'turbulent_inflow = .T. requires ' // &
4089	'initializing_actions = ''cyclic_fill'' '
4090	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
4091	ENDIF
4092
4093	!
4094	!-- In case of turbulent inflow calculate the index of the recycling plane
4095	IF ( turbulent_inflow ) THEN
4096	IF ( recycling_width == 9999999.9_wp ) THEN
4097	!
4098	!-- Set the default value for the width of the recycling domain
4099	recycling_width = 0.1_wp * nx * dx
4100	ELSE
4101	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
4102	WRITE( message_string, * ) 'illegal value for recycling_width:', &
4103	' ', recycling_width
4104	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
4105	ENDIF
4106	ENDIF
4107	!
4108	!-- Calculate the index
4109	recycling_plane = recycling_width / dx
4110	ENDIF
4111
4112	!
4113	!-- Determine damping level index for 1D model
4114	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
4115	IF ( damp_level_1d == -1.0_wp ) THEN
4116	damp_level_1d = zu(nzt+1)
4117	damp_level_ind_1d = nzt + 1
4118	ELSEIF ( damp_level_1d < 0.0_wp .OR. damp_level_1d > zu(nzt+1) ) THEN
4119	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
4120	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
4121	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
4122	ELSE
4123	DO k = 1, nzt+1
4124	IF ( damp_level_1d <= zu(k) ) THEN
4125	damp_level_ind_1d = k
4126	EXIT
4127	ENDIF
4128	ENDDO
4129	ENDIF
4130	ENDIF
4131
4132	!
4133	!-- Check some other 1d-model parameters
4134	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
4135	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
4136	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
4137	'" is unknown'
4138	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
4139	ENDIF
4140	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
4141	TRIM( dissipation_1d ) /= 'detering' ) THEN
4142	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
4143	'" is unknown'
4144	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
4145	ENDIF
4146
4147	!
4148	!-- Set time for the next user defined restart (time_restart is the
4149	!-- internal parameter for steering restart events)
4150	IF ( restart_time /= 9999999.9_wp ) THEN
4151	IF ( restart_time > time_since_reference_point ) THEN
4152	time_restart = restart_time
4153	ENDIF
4154	ELSE
4155	!
4156	!-- In case of a restart run, set internal parameter to default (no restart)
4157	!-- if the NAMELIST-parameter restart_time is omitted
4158	time_restart = 9999999.9_wp
4159	ENDIF
4160
4161	!
4162	!-- Set default value of the time needed to terminate a model run
4163	IF ( termination_time_needed == -1.0_wp ) THEN
4164	IF ( host(1:3) == 'ibm' ) THEN
4165	termination_time_needed = 300.0_wp
4166	ELSE
4167	termination_time_needed = 35.0_wp
4168	ENDIF
4169	ENDIF
4170
4171	!
4172	!-- Check the time needed to terminate a model run
4173	IF ( host(1:3) == 't3e' ) THEN
4174	!
4175	!-- Time needed must be at least 30 seconds on all CRAY machines, because
4176	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
4177	IF ( termination_time_needed <= 30.0_wp ) THEN
4178	WRITE( message_string, * ) 'termination_time_needed = ', &
4179	termination_time_needed, ' must be > 30.0 on host "', &
4180	TRIM( host ), '"'
4181	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
4182	ENDIF
4183	ELSEIF ( host(1:3) == 'ibm' ) THEN
4184	!
4185	!-- On IBM-regatta machines the time should be at least 300 seconds,
4186	!-- because the job time consumed before executing palm (for compiling,
4187	!-- copying of files, etc.) has to be regarded
4188	IF ( termination_time_needed < 300.0_wp ) THEN
4189	WRITE( message_string, * ) 'termination_time_needed = ', &
4190	termination_time_needed, ' should be >= 300.0 on host "', &
4191	TRIM( host ), '"'
4192	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
4193	ENDIF
4194	ENDIF
4195
4196	!
4197	!-- Check pressure gradient conditions
4198	IF ( dp_external .AND. conserve_volume_flow ) THEN
4199	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
4200	'w are .TRUE. but one of them must be .FALSE.'
4201	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
4202	ENDIF
4203	IF ( dp_external ) THEN
4204	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
4205	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
4206	' of range'
4207	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
4208	ENDIF
4209	IF ( .NOT. ANY( dpdxy /= 0.0_wp ) ) THEN
4210	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
4211	'ro, i.e. the external pressure gradient & will not be applied'
4212	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
4213	ENDIF
4214	ENDIF
4215	IF ( ANY( dpdxy /= 0.0_wp ) .AND. .NOT. dp_external ) THEN
4216	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
4217	'.FALSE., i.e. the external pressure gradient & will not be applied'
4218	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
4219	ENDIF
4220	IF ( conserve_volume_flow ) THEN
4221	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
4222
4223	conserve_volume_flow_mode = 'initial_profiles'
4224
4225	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
4226	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
4227	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
4228	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
4229	conserve_volume_flow_mode
4230	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
4231	ENDIF
4232	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
4233	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
4234	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
4235	'require conserve_volume_flow_mode = ''initial_profiles'''
4236	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
4237	ENDIF
4238	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
4239	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
4240	WRITE( message_string, * ) 'cyclic boundary conditions ', &
4241	'require conserve_volume_flow_mode = ''initial_profiles''', &
4242	' or ''bulk_velocity'''
4243	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
4244	ENDIF
4245	ENDIF
4246	IF ( ( u_bulk /= 0.0_wp .OR. v_bulk /= 0.0_wp ) .AND. &
4247	( .NOT. conserve_volume_flow .OR. &
4248	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
4249	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
4250	'conserve_volume_flow = .T. and ', &
4251	'conserve_volume_flow_mode = ''bulk_velocity'''
4252	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
4253	ENDIF
4254
4255	!
4256	!-- Check particle attributes
4257	IF ( particle_color /= 'none' ) THEN
4258	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
4259	particle_color /= 'z' ) THEN
4260	message_string = 'illegal value for parameter particle_color: ' // &
4261	TRIM( particle_color)
4262	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
4263	ELSE
4264	IF ( color_interval(2) <= color_interval(1) ) THEN
4265	message_string = 'color_interval(2) <= color_interval(1)'
4266	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
4267	ENDIF
4268	ENDIF
4269	ENDIF
4270
4271	IF ( particle_dvrpsize /= 'none' ) THEN
4272	IF ( particle_dvrpsize /= 'absw' ) THEN
4273	message_string = 'illegal value for parameter particle_dvrpsize:' // &
4274	' ' // TRIM( particle_color)
4275	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
4276	ELSE
4277	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
4278	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
4279	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
4280	ENDIF
4281	ENDIF
4282	ENDIF
4283
4284	!
4285	!-- Check nudging and large scale forcing from external file
4286	IF ( nudging .AND. ( .NOT. large_scale_forcing ) ) THEN
4287	message_string = 'Nudging requires large_scale_forcing = .T.. &'// &
4288	'Surface fluxes and geostrophic wind should be &'// &
4289	'prescribed in file LSF_DATA'
4290	CALL message( 'check_parameters', 'PA0374', 1, 2, 0, 6, 0 )
4291	ENDIF
4292
4293	IF ( large_scale_forcing .AND. ( bc_lr /= 'cyclic' .OR. &
4294	bc_ns /= 'cyclic' ) ) THEN
4295	message_string = 'Non-cyclic lateral boundaries do not allow for &' // &
4296	'the usage of large scale forcing from external file.'
4297	CALL message( 'check_parameters', 'PA0375', 1, 2, 0, 6, 0 )
4298	ENDIF
4299
4300	IF ( large_scale_forcing .AND. ( .NOT. humidity ) ) THEN
4301	message_string = 'The usage of large scale forcing from external &'// &
4302	'file LSF_DATA requires humidity = .T..'
4303	CALL message( 'check_parameters', 'PA0376', 1, 2, 0, 6, 0 )
4304	ENDIF
4305
4306	IF ( large_scale_forcing .AND. topography /= 'flat' ) THEN
4307	message_string = 'The usage of large scale forcing from external &'// &
4308	'file LSF_DATA is not implemented for non-flat topography'
4309	CALL message( 'check_parameters', 'PA0377', 1, 2, 0, 6, 0 )
4310	ENDIF
4311
4312	IF ( large_scale_forcing .AND. ocean ) THEN
4313	message_string = 'The usage of large scale forcing from external &'// &
4314	'file LSF_DATA is not implemented for ocean runs'
4315	CALL message( 'check_parameters', 'PA0378', 1, 2, 0, 6, 0 )
4316	ENDIF
4317
4318	CALL location_message( 'finished', .TRUE. )
4319
4320	!
4321	!-- Prevent empty time records in volume, cross-section and masked data in case of
4322	!-- non-parallel netcdf-output in restart runs
4323	IF ( netcdf_data_format < 5 ) THEN
4324	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
4325	do3d_time_count = 0
4326	do2d_xy_time_count = 0
4327	do2d_xz_time_count = 0
4328	do2d_yz_time_count = 0
4329	domask_time_count = 0
4330	ENDIF
4331	ENDIF
4332
4333	!
4334	!-- Check for valid setting of most_method
4335	IF ( TRIM( most_method ) /= 'circular' .AND. &
4336	TRIM( most_method ) /= 'newton' .AND. &
4337	TRIM( most_method ) /= 'lookup' ) THEN
4338	message_string = 'most_method = "' // TRIM( most_method ) // &
4339	'" is unknown'
4340	CALL message( 'check_parameters', 'PA0416', 1, 2, 0, 6, 0 )
4341	ENDIF
4342
4343	!
4344	!-- Check &userpar parameters
4345	CALL user_check_parameters
4346
4347	CONTAINS
4348
4349	!------------------------------------------------------------------------------!
4350	! Description:
4351	! ------------
4352	!> Check the length of data output intervals. In case of parallel NetCDF output
4353	!> the time levels of the output files need to be fixed. Therefore setting the
4354	!> output interval to 0.0s (usually used to output each timestep) is not
4355	!> possible as long as a non-fixed timestep is used.
4356	!------------------------------------------------------------------------------!
4357
4358	SUBROUTINE check_dt_do( dt_do, dt_do_name )
4359
4360	IMPLICIT NONE
4361
4362	CHARACTER (LEN=*), INTENT (IN) :: dt_do_name !< parin variable name
4363
4364	REAL(wp), INTENT (INOUT) :: dt_do !< data output interval
4365
4366	IF ( dt_do == 0.0_wp ) THEN
4367	IF ( dt_fixed ) THEN
4368	WRITE( message_string, '(A,F9.4,A)' ) 'Output at every ' // &
4369	'timestep is desired (' // dt_do_name // ' = 0.0).&'// &
4370	'Setting the output interval to the fixed timestep '// &
4371	'dt = ', dt, 's.'
4372	CALL message( 'check_parameters', 'PA0060', 0, 0, 0, 6, 0 )
4373	dt_do = dt
4374	ELSE
4375	message_string = dt_do_name // ' = 0.0 while using a ' // &
4376	'variable timestep and parallel netCDF4 ' // &
4377	'is not allowed.'
4378	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
4379	ENDIF
4380	ENDIF
4381
4382	END SUBROUTINE check_dt_do
4383
4384	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |