Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 175

Last change on this file since 175 was 153, checked in by steinfeld, 17 years ago
Update for the plant canopy model
Property svn:keywords set to `Id`
File size: 113.1 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Leaf area density (LAD) explicitly set to its surface value at k=0
7	! Case of reading data for recycling included in initializing_actions,
8	! check of turbulent_inflow and calculation of recycling_plane
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: check_parameters.f90 153 2008-03-19 09:41:30Z steinfeld $
13	!
14	! 138 2007-11-28 10:03:58Z letzel
15	! Plant canopy added
16	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
17	! Multigrid solver allows topography, checking of dt_sort_particles
18	! Bugfix: initializing u_init and v_init in case of ocean runs
19	!
20	! 109 2007-08-28 15:26:47Z letzel
21	! Check coupling_mode and set default (obligatory) values (like boundary
22	! conditions for temperature and fluxes) in case of coupled runs.
23	! +profiles for wp and w"e
24	! Bugfix: Error message concerning output of particle concentration (pc)
25	! modified
26	! More checks and more default values for coupled runs
27	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
28	! cloud_physics = .T.)
29	! Rayleigh damping for ocean fixed.
30	! Check and, if necessary, set default value for dt_coupling
31	!
32	! 97 2007-06-21 08:23:15Z raasch
33	! Initial salinity profile is calculated, salinity boundary conditions are
34	! checked,
35	! z_max_do1d is checked only in case of ocean = .f.,
36	! +initial temperature and geostrophic velocity profiles for the ocean version,
37	! use_pt_reference renamed use_reference
38	!
39	! 89 2007-05-25 12:08:31Z raasch
40	! Check for user-defined profiles
41	!
42	! 75 2007-03-22 09:54:05Z raasch
43	! "by_user" allowed as initializing action, -data_output_ts,
44	! leapfrog with non-flat topography not allowed any more, loop_optimization
45	! and pt_reference are checked, moisture renamed humidity,
46	! output of precipitation amount/rate and roughnes length + check
47	! possible negative humidities are avoided in initial profile,
48	! dirichlet/neumann changed to dirichlet/radiation, etc.,
49	! revision added to run_description_header
50	!
51	! 20 2007-02-26 00:12:32Z raasch
52	! Temperature and humidity gradients at top are now calculated for nzt+1,
53	! top_heatflux and respective boundary condition bc_pt_t is checked
54	!
55	! RCS Log replace by Id keyword, revision history cleaned up
56	!
57	! Revision 1.61 2006/08/04 14:20:25 raasch
58	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
59	! use_upstream_for_tke, default value for dt_dopts,
60	! generation of file header moved from routines palm and header to here
61	!
62	! Revision 1.1 1997/08/26 06:29:23 raasch
63	! Initial revision
64	!
65	!
66	! Description:
67	! ------------
68	! Check control parameters and deduce further quantities.
69	!------------------------------------------------------------------------------!
70
71	USE arrays_3d
72	USE constants
73	USE control_parameters
74	USE grid_variables
75	USE indices
76	USE model_1d
77	USE netcdf_control
78	USE particle_attributes
79	USE pegrid
80	USE profil_parameter
81	USE statistics
82	USE transpose_indices
83
84	IMPLICIT NONE
85
86	CHARACTER (LEN=1) :: sq
87	CHARACTER (LEN=6) :: var
88	CHARACTER (LEN=7) :: unit
89	CHARACTER (LEN=8) :: date
90	CHARACTER (LEN=10) :: time
91	CHARACTER (LEN=40) :: coupling_string
92	CHARACTER (LEN=100) :: action
93
94	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
95	position, prec
96	LOGICAL :: found, ldum
97	REAL :: gradient, maxn, maxp, remote = 0.0
98
99	!
100	!-- Warning, if host is not set
101	IF ( host(1:1) == ' ' ) THEN
102	IF ( myid == 0 ) THEN
103	PRINT*, '+++ WARNING: check_parameters:'
104	PRINT*, ' "host" is not set. Please check that environment', &
105	' variable "localhost"'
106	PRINT*, ' is set before running PALM'
107	ENDIF
108	ENDIF
109
110	!
111	!-- Check the coupling mode
112	IF ( coupling_mode /= 'uncoupled' .AND. &
113	coupling_mode /= 'atmosphere_to_ocean' .AND. &
114	coupling_mode /= 'ocean_to_atmosphere' ) THEN
115	IF ( myid == 0 ) THEN
116	PRINT*, '+++ check_parameters:'
117	PRINT*, ' illegal coupling mode: ', TRIM( coupling_mode )
118	ENDIF
119	CALL local_stop
120	ENDIF
121
122	!
123	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
124	IF ( coupling_mode /= 'uncoupled' ) THEN
125	IF ( dt_coupling == 9999999.9 ) THEN
126	IF ( myid == 0 ) THEN
127	PRINT*, '+++ check_parameters:'
128	PRINT*, ' dt_coupling is not set but required for coupling ', &
129	'mode: ', TRIM( coupling_mode )
130	ENDIF
131	CALL local_stop
132	ENDIF
133	#if defined( __parallel ) && defined( __mpi2 )
134	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, myid, 11, comm_inter, ierr )
135	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 11, comm_inter, status, ierr )
136	IF ( dt_coupling /= remote ) THEN
137	IF ( myid == 0 ) THEN
138	PRINT*, '+++ check_parameters:'
139	PRINT*, ' TRIM( coupling_mode ): dt_coupling = ', dt_coupling
140	PRINT*, ' is not equal to dt_coupling_remote = ', remote
141	ENDIF
142	CALL local_stop
143	ENDIF
144	IF ( dt_coupling <= 0.0 ) THEN
145	CALL MPI_SEND( dt_max, 1, MPI_REAL, myid, 19, comm_inter, ierr )
146	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 19, comm_inter, status, &
147	ierr )
148	dt_coupling = MAX( dt_max, remote )
149	IF ( myid == 0 ) THEN
150	PRINT*, '+++ check_parameters:'
151	PRINT*, ' TRIM( coupling_mode ): dt_coupling <= 0.0'
152	PRINT*, ' is not allowed and is reset to MAX(dt_max(A,O)) = ', &
153	dt_coupling
154	ENDIF
155	ENDIF
156	CALL MPI_SEND( restart_time, 1, MPI_REAL, myid, 12, comm_inter, ierr )
157	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 12, comm_inter, status, ierr )
158	IF ( restart_time /= remote ) THEN
159	IF ( myid == 0 ) THEN
160	PRINT*, '+++ check_parameters:'
161	PRINT*, ' TRIM( coupling_mode ): restart_time = ', restart_time
162	PRINT*, ' is not equal to restart_time_remote = ', remote
163	ENDIF
164	CALL local_stop
165	ENDIF
166	CALL MPI_SEND( dt_restart, 1, MPI_REAL, myid, 13, comm_inter, ierr )
167	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 13, comm_inter, status, ierr )
168	IF ( dt_restart /= remote ) THEN
169	IF ( myid == 0 ) THEN
170	PRINT*, '+++ check_parameters:'
171	PRINT*, ' TRIM( coupling_mode ): dt_restart = ', dt_restart
172	PRINT*, ' is not equal to dt_restart_remote = ', remote
173	ENDIF
174	CALL local_stop
175	ENDIF
176	CALL MPI_SEND( end_time, 1, MPI_REAL, myid, 14, comm_inter, ierr )
177	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 14, comm_inter, status, ierr )
178	IF ( end_time /= remote ) THEN
179	IF ( myid == 0 ) THEN
180	PRINT*, '+++ check_parameters:'
181	PRINT*, ' TRIM( coupling_mode ): end_time = ', end_time
182	PRINT*, ' is not equal to end_time_remote = ', remote
183	ENDIF
184	CALL local_stop
185	ENDIF
186	CALL MPI_SEND( dx, 1, MPI_REAL, myid, 15, comm_inter, ierr )
187	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 15, comm_inter, status, ierr )
188	IF ( dx /= remote ) THEN
189	IF ( myid == 0 ) THEN
190	PRINT*, '+++ check_parameters:'
191	PRINT*, ' TRIM( coupling_mode ): dx = ', dx
192	PRINT*, ' is not equal to dx_remote = ', remote
193	ENDIF
194	CALL local_stop
195	ENDIF
196	CALL MPI_SEND( dy, 1, MPI_REAL, myid, 16, comm_inter, ierr )
197	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 16, comm_inter, status, ierr )
198	IF ( dy /= remote ) THEN
199	IF ( myid == 0 ) THEN
200	PRINT*, '+++ check_parameters:'
201	PRINT*, ' TRIM( coupling_mode ): dy = ', dy
202	PRINT*, ' is not equal to dy_remote = ', remote
203	ENDIF
204	CALL local_stop
205	ENDIF
206	CALL MPI_SEND( nx, 1, MPI_INTEGER, myid, 17, comm_inter, ierr )
207	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 17, comm_inter, status, &
208	ierr )
209	IF ( nx /= iremote ) THEN
210	IF ( myid == 0 ) THEN
211	PRINT*, '+++ check_parameters:'
212	PRINT*, ' TRIM( coupling_mode ): nx = ', nx
213	PRINT*, ' is not equal to nx_remote = ', iremote
214	ENDIF
215	CALL local_stop
216	ENDIF
217	CALL MPI_SEND( ny, 1, MPI_INTEGER, myid, 18, comm_inter, ierr )
218	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 18, comm_inter, status, &
219	ierr )
220	IF ( ny /= iremote ) THEN
221	IF ( myid == 0 ) THEN
222	PRINT*, '+++ check_parameters:'
223	PRINT*, ' TRIM( coupling_mode ): ny = ', ny
224	PRINT*, ' is not equal to ny_remote = ', iremote
225	ENDIF
226	CALL local_stop
227	ENDIF
228	#endif
229	ENDIF
230
231	#if defined( __parallel ) && defined( __mpi2 )
232	!
233	!-- Exchange via intercommunicator
234	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
235	CALL MPI_SEND( humidity, &
236	1, MPI_LOGICAL, myid, 19, comm_inter, ierr )
237	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
238	CALL MPI_RECV( humidity_remote, &
239	1, MPI_LOGICAL, myid, 19, comm_inter, status, ierr )
240	ENDIF
241	#endif
242
243
244	!
245	!-- Generate the file header which is used as a header for most of PALM's
246	!-- output files
247	CALL DATE_AND_TIME( date, time )
248	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
249	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
250	IF ( coupling_mode == 'uncoupled' ) THEN
251	coupling_string = ''
252	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
253	coupling_string = ' coupled (atmosphere)'
254	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
255	coupling_string = ' coupled (ocean)'
256	ENDIF
257
258	WRITE ( run_description_header, &
259	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
260	TRIM( version ), TRIM( revision ), 'run: ', &
261	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
262	'host: ', TRIM( host ), run_date, run_time
263
264	!
265	!-- Check the general loop optimization method
266	IF ( loop_optimization == 'default' ) THEN
267	IF ( host(1:3) == 'nec' ) THEN
268	loop_optimization = 'vector'
269	ELSE
270	loop_optimization = 'cache'
271	ENDIF
272	ENDIF
273	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
274	.AND. loop_optimization /= 'vector' ) THEN
275	IF ( myid == 0 ) THEN
276	PRINT*, '+++ check_parameters:'
277	PRINT*, ' illegal value given for loop_optimization: ', &
278	TRIM( loop_optimization )
279	ENDIF
280	CALL local_stop
281	ENDIF
282
283	!
284	!-- Check topography setting (check for illegal parameter combinations)
285	IF ( topography /= 'flat' ) THEN
286	action = ' '
287	IF ( scalar_advec /= 'pw-scheme' ) THEN
288	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
289	ENDIF
290	IF ( momentum_advec /= 'pw-scheme' ) THEN
291	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
292	ENDIF
293	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
294	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
295	ENDIF
296	IF ( psolver == 'sor' ) THEN
297	WRITE( action, '(A,A)' ) 'psolver = ', psolver
298	ENDIF
299	IF ( sloping_surface ) THEN
300	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
301	ENDIF
302	IF ( galilei_transformation ) THEN
303	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
304	ENDIF
305	IF ( cloud_physics ) THEN
306	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
307	ENDIF
308	IF ( cloud_droplets ) THEN
309	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
310	ENDIF
311	IF ( humidity ) THEN
312	WRITE( action, '(A)' ) 'humidity = .TRUE.'
313	ENDIF
314	IF ( .NOT. prandtl_layer ) THEN
315	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
316	ENDIF
317	IF ( action /= ' ' ) THEN
318	IF ( myid == 0 ) THEN
319	PRINT*, '+++ check_parameters:'
320	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
321	ENDIF
322	CALL local_stop
323	ENDIF
324	ENDIF
325
326	!
327	!-- Check ocean setting
328	IF ( ocean ) THEN
329	action = ' '
330	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
331	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
332	ENDIF
333	IF ( momentum_advec == 'ups-scheme' ) THEN
334	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
335	ENDIF
336	IF ( action /= ' ' ) THEN
337	IF ( myid == 0 ) THEN
338	PRINT*, '+++ check_parameters:'
339	PRINT*, ' ocean = .T. does not allow ', TRIM( action )
340	ENDIF
341	CALL local_stop
342	ENDIF
343	ENDIF
344
345	!
346	!-- Check whether there are any illegal values
347	!-- Pressure solver:
348	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
349	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
350	IF ( myid == 0 ) THEN
351	PRINT*, '+++ check_parameters:'
352	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
353	psolver
354	ENDIF
355	CALL local_stop
356	ENDIF
357
358	#if defined( __parallel )
359	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
360	IF ( myid == 0 ) THEN
361	PRINT*, '+++ check_parameters:'
362	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
363	'1d domain-decomposition along x'
364	PRINT*, ' please do not set npey/=1 in the parameter file'
365	ENDIF
366	CALL local_stop
367	ENDIF
368	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
369	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
370	IF ( myid == 0 ) THEN
371	PRINT*, '+++ check_parameters:'
372	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
373	'subdomains with unequal size'
374	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
375	' file'
376	ENDIF
377	CALL local_stop
378	ENDIF
379	#else
380	IF ( psolver == 'poisfft_hybrid' ) THEN
381	IF ( myid == 0 ) THEN
382	PRINT*, '+++ check_parameters:'
383	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
384	'parallel environment'
385	ENDIF
386	CALL local_stop
387	ENDIF
388	#endif
389
390	IF ( psolver == 'multigrid' ) THEN
391	IF ( cycle_mg == 'w' ) THEN
392	gamma_mg = 2
393	ELSEIF ( cycle_mg == 'v' ) THEN
394	gamma_mg = 1
395	ELSE
396	IF ( myid == 0 ) THEN
397	PRINT*, '+++ check_parameters:'
398	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
399	ENDIF
400	CALL local_stop
401	ENDIF
402	ENDIF
403
404	IF ( fft_method /= 'singleton-algorithm' .AND. &
405	fft_method /= 'temperton-algorithm' .AND. &
406	fft_method /= 'system-specific' ) THEN
407	IF ( myid == 0 ) THEN
408	PRINT*, '+++ check_parameters:'
409	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
410	ENDIF
411	CALL local_stop
412	ENDIF
413
414	!
415	!-- Advection schemes:
416	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
417	THEN
418	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
419	'scheme: momentum_advec=', momentum_advec
420	CALL local_stop
421	ENDIF
422	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
423	.AND. timestep_scheme /= 'euler' ) THEN
424	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
425	momentum_advec, ' is not allowed with ', &
426	'timestep_scheme=', timestep_scheme
427	CALL local_stop
428	ENDIF
429
430	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
431	scalar_advec /= 'ups-scheme' ) THEN
432	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
433	'scheme: scalar_advec=', scalar_advec
434	CALL local_stop
435	ENDIF
436
437	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
438	use_upstream_for_tke = .TRUE.
439	IF ( myid == 0 ) THEN
440	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
441	'.TRUE. because use_sgs_for_particles = .TRUE.'
442	ENDIF
443	ENDIF
444
445	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
446	IF ( myid == 0 ) THEN
447	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
448	'not allowed with timestep_scheme=', timestep_scheme
449	ENDIF
450	CALL local_stop
451	ENDIF
452
453	!
454	!-- Timestep schemes:
455	SELECT CASE ( TRIM( timestep_scheme ) )
456
457	CASE ( 'euler' )
458	intermediate_timestep_count_max = 1
459	asselin_filter_factor = 0.0
460
461	CASE ( 'leapfrog', 'leapfrog+euler' )
462	intermediate_timestep_count_max = 1
463
464	CASE ( 'runge-kutta-2' )
465	intermediate_timestep_count_max = 2
466	asselin_filter_factor = 0.0
467
468	CASE ( 'runge-kutta-3' )
469	intermediate_timestep_count_max = 3
470	asselin_filter_factor = 0.0
471
472	CASE DEFAULT
473	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
474	'scheme: timestep_scheme=', timestep_scheme
475	CALL local_stop
476
477	END SELECT
478
479	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
480	THEN
481	IF ( myid == 0 ) THEN
482	PRINT*, '+++ check_parameters: scalar advection scheme "', &
483	TRIM( scalar_advec ), '"'
484	PRINT*, ' does not work with timestep_scheme "', &
485	TRIM( timestep_scheme ), '"'
486	ENDIF
487	CALL local_stop
488	ENDIF
489
490	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
491	THEN
492	IF ( myid == 0 ) THEN
493	PRINT*, '+++ check_parameters: momentum advection scheme "', &
494	TRIM( momentum_advec ), '"'
495	PRINT*, ' does not work with timestep_scheme "', &
496	TRIM( timestep_scheme ), '"'
497	ENDIF
498	CALL local_stop
499	ENDIF
500
501
502	IF ( initializing_actions == ' ' ) THEN
503	IF ( myid == 0 ) THEN
504	PRINT*, '+++ check parameters:'
505	PRINT*, ' no value found for initializing_actions'
506	ENDIF
507	CALL local_stop
508	ENDIF
509
510	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
511	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
512	!
513	!-- No model continuation run; several initialising actions are possible
514	action = initializing_actions
515	DO WHILE ( TRIM( action ) /= '' )
516	position = INDEX( action, ' ' )
517	SELECT CASE ( action(1:position-1) )
518
519	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
520	'by_user', 'initialize_vortex', 'initialize_ptanom' )
521	action = action(position+1:)
522
523	CASE DEFAULT
524	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
525	'ng_action unkown or not allowed: action = "', &
526	TRIM(action), '"'
527	CALL local_stop
528
529	END SELECT
530	ENDDO
531	ENDIF
532	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
533	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
534	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
535	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
536	' allowed simultaneously'
537	CALL local_stop
538	ENDIF
539	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
540	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
541	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
542	'"set_constant_profiles" and "by_user" are not', &
543	' allowed simultaneously'
544	CALL local_stop
545	ENDIF
546	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
547	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
548	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
549	'"by_user" and "set_1d-model_profiles" are not', &
550	' allowed simultaneously'
551	CALL local_stop
552	ENDIF
553
554	IF ( cloud_physics .AND. .NOT. humidity ) THEN
555	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
556	cloud_physics, ' is not allowed with ', &
557	'humidity =', humidity
558	CALL local_stop
559	ENDIF
560
561	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
562	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
563	precipitation, ' is not allowed with ', &
564	'cloud_physics =', cloud_physics
565	CALL local_stop
566	ENDIF
567
568	IF ( humidity .AND. sloping_surface ) THEN
569	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE', &
570	'and hang = TRUE are not', &
571	' allowed simultaneously'
572	CALL local_stop
573	ENDIF
574
575	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
576	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
577	'is not implemented for humidity'
578	CALL local_stop
579	ENDIF
580
581	IF ( passive_scalar .AND. humidity ) THEN
582	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE and', &
583	'passive_scalar = TRUE is not allowed ', &
584	'simultaneously'
585	CALL local_stop
586	ENDIF
587
588	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
589	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
590	'is not implemented for passive_scalar'
591	CALL local_stop
592	ENDIF
593
594	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
595	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
596	TRIM( grid_matching ), &
597	'" found for parameter grid_matching'
598	CALL local_stop
599	ENDIF
600
601	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
602	IF ( myid == 0 ) PRINT*, '+++ check_parameters: plant_canopy = TRUE', &
603	'requires a non-zero drag_coefficient'
604	CALL local_stop
605	ENDIF
606
607	!
608	!-- In case of no model continuation run, check initialising parameters and
609	!-- deduce further quantities
610	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
611
612	!
613	!-- Initial profiles for 1D and 3D model, respectively
614	u_init = ug_surface
615	v_init = vg_surface
616	pt_init = pt_surface
617	IF ( humidity ) q_init = q_surface
618	IF ( ocean ) sa_init = sa_surface
619	IF ( passive_scalar ) q_init = s_surface
620	IF ( plant_canopy ) lad = 0.0
621
622	!
623	!--
624	!-- If required, compute initial profile of the geostrophic wind
625	!-- (component ug)
626	i = 1
627	gradient = 0.0
628
629	IF ( .NOT. ocean ) THEN
630
631	ug_vertical_gradient_level_ind(1) = 0
632	ug(0) = ug_surface
633	DO k = 1, nzt+1
634	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
635	ug_vertical_gradient_level(i) >= 0.0 ) THEN
636	gradient = ug_vertical_gradient(i) / 100.0
637	ug_vertical_gradient_level_ind(i) = k - 1
638	i = i + 1
639	IF ( i > 10 ) THEN
640	IF ( myid == 0 ) THEN
641	PRINT*, '+++ check_parameters: upper bound 10 of array', &
642	' "ug_vertical_gradient_level_ind" exceeded'
643	ENDIF
644	CALL local_stop
645	ENDIF
646	ENDIF
647	IF ( gradient /= 0.0 ) THEN
648	IF ( k /= 1 ) THEN
649	ug(k) = ug(k-1) + dzu(k) * gradient
650	ELSE
651	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
652	ENDIF
653	ELSE
654	ug(k) = ug(k-1)
655	ENDIF
656	ENDDO
657
658	ELSE
659
660	ug_vertical_gradient_level_ind(1) = nzt+1
661	ug(nzt+1) = ug_surface
662	DO k = nzt, 0, -1
663	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
664	ug_vertical_gradient_level(i) <= 0.0 ) THEN
665	gradient = ug_vertical_gradient(i) / 100.0
666	ug_vertical_gradient_level_ind(i) = k + 1
667	i = i + 1
668	IF ( i > 10 ) THEN
669	IF ( myid == 0 ) THEN
670	PRINT*, '+++ check_parameters: upper bound 10 of array', &
671	' "ug_vertical_gradient_level_ind" exceeded'
672	ENDIF
673	CALL local_stop
674	ENDIF
675	ENDIF
676	IF ( gradient /= 0.0 ) THEN
677	IF ( k /= nzt ) THEN
678	ug(k) = ug(k+1) - dzu(k+1) * gradient
679	ELSE
680	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
681	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
682	ENDIF
683	ELSE
684	ug(k) = ug(k+1)
685	ENDIF
686	ENDDO
687
688	ENDIF
689
690	u_init = ug
691
692	!
693	!-- In case of no given gradients for ug, choose a vanishing gradient
694	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
695	ug_vertical_gradient_level(1) = 0.0
696	ENDIF
697
698	!
699	!--
700	!-- If required, compute initial profile of the geostrophic wind
701	!-- (component vg)
702	i = 1
703	gradient = 0.0
704
705	IF ( .NOT. ocean ) THEN
706
707	vg_vertical_gradient_level_ind(1) = 0
708	vg(0) = vg_surface
709	DO k = 1, nzt+1
710	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
711	vg_vertical_gradient_level(i) >= 0.0 ) THEN
712	gradient = vg_vertical_gradient(i) / 100.0
713	vg_vertical_gradient_level_ind(i) = k - 1
714	i = i + 1
715	IF ( i > 10 ) THEN
716	IF ( myid == 0 ) THEN
717	PRINT*, '+++ check_parameters: upper bound 10 of array', &
718	' "vg_vertical_gradient_level_ind" exceeded'
719	ENDIF
720	CALL local_stop
721	ENDIF
722	ENDIF
723	IF ( gradient /= 0.0 ) THEN
724	IF ( k /= 1 ) THEN
725	vg(k) = vg(k-1) + dzu(k) * gradient
726	ELSE
727	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
728	ENDIF
729	ELSE
730	vg(k) = vg(k-1)
731	ENDIF
732	ENDDO
733
734	ELSE
735
736	vg_vertical_gradient_level_ind(1) = nzt+1
737	vg(nzt+1) = vg_surface
738	DO k = nzt, 0, -1
739	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
740	vg_vertical_gradient_level(i) <= 0.0 ) THEN
741	gradient = vg_vertical_gradient(i) / 100.0
742	vg_vertical_gradient_level_ind(i) = k + 1
743	i = i + 1
744	IF ( i > 10 ) THEN
745	IF ( myid == 0 ) THEN
746	PRINT*, '+++ check_parameters: upper bound 10 of array', &
747	' "vg_vertical_gradient_level_ind" exceeded'
748	ENDIF
749	CALL local_stop
750	ENDIF
751	ENDIF
752	IF ( gradient /= 0.0 ) THEN
753	IF ( k /= nzt ) THEN
754	vg(k) = vg(k+1) - dzu(k+1) * gradient
755	ELSE
756	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
757	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
758	ENDIF
759	ELSE
760	vg(k) = vg(k+1)
761	ENDIF
762	ENDDO
763
764	ENDIF
765
766	v_init = vg
767
768	!
769	!-- In case of no given gradients for vg, choose a vanishing gradient
770	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
771	vg_vertical_gradient_level(1) = 0.0
772	ENDIF
773
774	!
775	!-- Compute initial temperature profile using the given temperature gradients
776	i = 1
777	gradient = 0.0
778
779	IF ( .NOT. ocean ) THEN
780
781	pt_vertical_gradient_level_ind(1) = 0
782	DO k = 1, nzt+1
783	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
784	pt_vertical_gradient_level(i) >= 0.0 ) THEN
785	gradient = pt_vertical_gradient(i) / 100.0
786	pt_vertical_gradient_level_ind(i) = k - 1
787	i = i + 1
788	IF ( i > 10 ) THEN
789	IF ( myid == 0 ) THEN
790	PRINT*, '+++ check_parameters: upper bound 10 of array', &
791	' "pt_vertical_gradient_level_ind" exceeded'
792	ENDIF
793	CALL local_stop
794	ENDIF
795	ENDIF
796	IF ( gradient /= 0.0 ) THEN
797	IF ( k /= 1 ) THEN
798	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
799	ELSE
800	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
801	ENDIF
802	ELSE
803	pt_init(k) = pt_init(k-1)
804	ENDIF
805	ENDDO
806
807	ELSE
808
809	pt_vertical_gradient_level_ind(1) = nzt+1
810	DO k = nzt, 0, -1
811	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
812	pt_vertical_gradient_level(i) <= 0.0 ) THEN
813	gradient = pt_vertical_gradient(i) / 100.0
814	pt_vertical_gradient_level_ind(i) = k + 1
815	i = i + 1
816	IF ( i > 10 ) THEN
817	IF ( myid == 0 ) THEN
818	PRINT*, '+++ check_parameters: upper bound 10 of array', &
819	' "pt_vertical_gradient_level_ind" exceeded'
820	ENDIF
821	CALL local_stop
822	ENDIF
823	ENDIF
824	IF ( gradient /= 0.0 ) THEN
825	IF ( k /= nzt ) THEN
826	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
827	ELSE
828	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
829	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
830	ENDIF
831	ELSE
832	pt_init(k) = pt_init(k+1)
833	ENDIF
834	ENDDO
835
836	ENDIF
837
838	!
839	!-- In case of no given temperature gradients, choose gradient of neutral
840	!-- stratification
841	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
842	pt_vertical_gradient_level(1) = 0.0
843	ENDIF
844
845	!
846	!-- Store temperature gradient at the top boundary for possible Neumann
847	!-- boundary condition
848	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
849
850	!
851	!-- If required, compute initial humidity or scalar profile using the given
852	!-- humidity/scalar gradient. In case of scalar transport, initially store
853	!-- values of the scalar parameters on humidity parameters
854	IF ( passive_scalar ) THEN
855	bc_q_b = bc_s_b
856	bc_q_t = bc_s_t
857	q_surface = s_surface
858	q_surface_initial_change = s_surface_initial_change
859	q_vertical_gradient = s_vertical_gradient
860	q_vertical_gradient_level = s_vertical_gradient_level
861	surface_waterflux = surface_scalarflux
862	ENDIF
863
864	IF ( humidity .OR. passive_scalar ) THEN
865
866	i = 1
867	gradient = 0.0
868	q_vertical_gradient_level_ind(1) = 0
869	DO k = 1, nzt+1
870	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
871	q_vertical_gradient_level(i) >= 0.0 ) THEN
872	gradient = q_vertical_gradient(i) / 100.0
873	q_vertical_gradient_level_ind(i) = k - 1
874	i = i + 1
875	IF ( i > 10 ) THEN
876	IF ( myid == 0 ) THEN
877	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
878	'ay "q_vertical_gradient_level_ind" exceeded'
879	ENDIF
880	CALL local_stop
881	ENDIF
882	ENDIF
883	IF ( gradient /= 0.0 ) THEN
884	IF ( k /= 1 ) THEN
885	q_init(k) = q_init(k-1) + dzu(k) * gradient
886	ELSE
887	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
888	ENDIF
889	ELSE
890	q_init(k) = q_init(k-1)
891	ENDIF
892	!
893	!-- Avoid negative humidities
894	IF ( q_init(k) < 0.0 ) THEN
895	q_init(k) = 0.0
896	ENDIF
897	ENDDO
898
899	!
900	!-- In case of no given humidity gradients, choose zero gradient
901	!-- conditions
902	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
903	q_vertical_gradient_level(1) = 0.0
904	ENDIF
905
906	!
907	!-- Store humidity gradient at the top boundary for possile Neumann
908	!-- boundary condition
909	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
910
911	ENDIF
912
913	!
914	!-- If required, compute initial salinity profile using the given salinity
915	!-- gradients
916	IF ( ocean ) THEN
917
918	i = 1
919	gradient = 0.0
920
921	sa_vertical_gradient_level_ind(1) = nzt+1
922	DO k = nzt, 0, -1
923	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
924	sa_vertical_gradient_level(i) <= 0.0 ) THEN
925	gradient = sa_vertical_gradient(i) / 100.0
926	sa_vertical_gradient_level_ind(i) = k + 1
927	i = i + 1
928	IF ( i > 10 ) THEN
929	IF ( myid == 0 ) THEN
930	PRINT*, '+++ check_parameters: upper bound 10 of array', &
931	' "sa_vertical_gradient_level_ind" exceeded'
932	ENDIF
933	CALL local_stop
934	ENDIF
935	ENDIF
936	IF ( gradient /= 0.0 ) THEN
937	IF ( k /= nzt ) THEN
938	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
939	ELSE
940	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
941	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
942	ENDIF
943	ELSE
944	sa_init(k) = sa_init(k+1)
945	ENDIF
946	ENDDO
947
948	ENDIF
949
950	!
951	!-- If required compute the profile of leaf area density used in the plant canopy model
952	IF ( plant_canopy ) THEN
953
954	i = 1
955	gradient = 0.0
956
957	IF ( .NOT. ocean ) THEN
958
959	lad(0) = lad_surface
960
961	lad_vertical_gradient_level_ind(1) = 0
962	DO k = 1, pch_index
963	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
964	lad_vertical_gradient_level(i) >= 0.0 ) THEN
965	gradient = lad_vertical_gradient(i)
966	lad_vertical_gradient_level_ind(i) = k - 1
967	i = i + 1
968	IF ( i > 10 ) THEN
969	IF ( myid == 0 ) THEN
970	PRINT*, '+++ user_init_3d_model: upper bound 10 of array', &
971	' "lad_vertical_gradient_level" exceeded'
972	ENDIF
973	CALL local_stop
974	ENDIF
975	ENDIF
976	IF ( gradient /= 0.0 ) THEN
977	IF ( k /= 1 ) THEN
978	lad(k) = lad(k-1) + dzu(k) * gradient
979	ELSE
980	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
981	ENDIF
982	ELSE
983	lad(k) = lad(k-1)
984	ENDIF
985	ENDDO
986
987	ENDIF
988
989	!
990	!-- In case of no given leaf area density gradients, choose a vanishing gradient
991	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
992	lad_vertical_gradient_level(1) = 0.0
993	ENDIF
994
995	ENDIF
996
997	ENDIF
998
999	!
1000	!-- Compute Coriolis parameter
1001	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1002	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1003
1004	!
1005	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1006	!-- set the reference temperature equal to the surface temperature.
1007	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1008
1009	!
1010	!-- Reference value has to be used in buoyancy terms
1011	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1012
1013	!
1014	!-- Sign of buoyancy/stability terms
1015	IF ( ocean ) atmos_ocean_sign = -1.0
1016
1017	!
1018	!-- Ocean version must use flux boundary conditions at the top
1019	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1020	IF ( myid == 0 ) PRINT*, '+++ check_parameters: use_top_fluxes ',&
1021	'must be .TRUE. in ocean version'
1022	CALL local_stop
1023	ENDIF
1024
1025	!
1026	!-- In case of a given slope, compute the relevant quantities
1027	IF ( alpha_surface /= 0.0 ) THEN
1028	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1029	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
1030	'=', alpha_surface, ' ) must be < 90.0'
1031	CALL local_stop
1032	ENDIF
1033	sloping_surface = .TRUE.
1034	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1035	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1036	ENDIF
1037
1038	!
1039	!-- Check time step and cfl_factor
1040	IF ( dt /= -1.0 ) THEN
1041	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1042	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
1043	CALL local_stop
1044	ENDIF
1045	dt_3d = dt
1046	dt_fixed = .TRUE.
1047	ENDIF
1048
1049	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1050	IF ( cfl_factor == -1.0 ) THEN
1051	IF ( momentum_advec == 'ups-scheme' .OR. &
1052	scalar_advec == 'ups-scheme' ) THEN
1053	cfl_factor = 0.8
1054	ELSE
1055	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1056	cfl_factor = 0.8
1057	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1058	cfl_factor = 0.9
1059	ELSE
1060	cfl_factor = 0.1
1061	ENDIF
1062	ENDIF
1063	ELSE
1064	IF ( myid == 0 ) THEN
1065	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
1066	' out of range'
1067	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
1068	ENDIF
1069	CALL local_stop
1070	ENDIF
1071	ENDIF
1072
1073	!
1074	!-- Store simulated time at begin
1075	simulated_time_at_begin = simulated_time
1076
1077	!
1078	!-- Set wind speed in the Galilei-transformed system
1079	IF ( galilei_transformation ) THEN
1080	IF ( use_ug_for_galilei_tr .AND. &
1081	ug_vertical_gradient_level(1) == 0.0 .AND. &
1082	vg_vertical_gradient_level(1) == 0.0 ) THEN
1083	u_gtrans = ug_surface
1084	v_gtrans = vg_surface
1085	ELSEIF ( use_ug_for_galilei_tr .AND. &
1086	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1087	IF ( myid == 0 ) THEN
1088	PRINT*, '+++ check_parameters:'
1089	PRINT*, ' baroclinicity (ug) not allowed'
1090	PRINT*, ' simultaneously with galilei transformation'
1091	ENDIF
1092	CALL local_stop
1093	ELSEIF ( use_ug_for_galilei_tr .AND. &
1094	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1095	IF ( myid == 0 ) THEN
1096	PRINT*, '+++ check_parameters:'
1097	PRINT*, ' baroclinicity (vg) not allowed'
1098	PRINT*, ' simultaneously with galilei transformation'
1099	ENDIF
1100	CALL local_stop
1101	ELSE
1102	IF ( myid == 0 ) THEN
1103	PRINT*, '+++ WARNING: check_parameters:'
1104	PRINT*, ' variable translation speed used for galilei-tran' // &
1105	'sformation, which'
1106	PRINT*, ' may cause instabilities in stably stratified regions'
1107	ENDIF
1108	ENDIF
1109	ENDIF
1110
1111	!
1112	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1113	!-- fluxes have to be used in the diffusion-terms
1114	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1115
1116	!
1117	!-- Check boundary conditions and set internal variables:
1118	!-- Lateral boundary conditions
1119	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1120	bc_lr /= 'radiation/dirichlet' ) THEN
1121	IF ( myid == 0 ) THEN
1122	PRINT*, '+++ check_parameters:'
1123	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
1124	ENDIF
1125	CALL local_stop
1126	ENDIF
1127	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1128	bc_ns /= 'radiation/dirichlet' ) THEN
1129	IF ( myid == 0 ) THEN
1130	PRINT*, '+++ check_parameters:'
1131	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
1132	ENDIF
1133	CALL local_stop
1134	ENDIF
1135
1136	!
1137	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1138	!-- Willimas advection scheme. Several schemes and tools do not work with
1139	!-- non-cyclic boundary conditions.
1140	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1141	IF ( psolver /= 'multigrid' ) THEN
1142	IF ( myid == 0 ) THEN
1143	PRINT*, '+++ check_parameters:'
1144	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1145	' psolver = ', psolver
1146	ENDIF
1147	CALL local_stop
1148	ENDIF
1149	IF ( momentum_advec /= 'pw-scheme' ) THEN
1150	IF ( myid == 0 ) THEN
1151	PRINT*, '+++ check_parameters:'
1152	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1153	' momentum_advec = ', momentum_advec
1154	ENDIF
1155	CALL local_stop
1156	ENDIF
1157	IF ( scalar_advec /= 'pw-scheme' ) THEN
1158	IF ( myid == 0 ) THEN
1159	PRINT*, '+++ check_parameters:'
1160	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1161	' scalar_advec = ', scalar_advec
1162	ENDIF
1163	CALL local_stop
1164	ENDIF
1165	IF ( galilei_transformation ) THEN
1166	IF ( myid == 0 ) THEN
1167	PRINT*, '+++ check_parameters:'
1168	PRINT*, ' non-cyclic lateral boundaries do not allow', &
1169	' galilei_transformation = .T.'
1170	ENDIF
1171	CALL local_stop
1172	ENDIF
1173	! IF ( conserve_volume_flow ) THEN
1174	! IF ( myid == 0 ) THEN
1175	! PRINT*, '+++ check_parameters:'
1176	! PRINT*, ' non-cyclic lateral boundaries do not allow', &
1177	! ' conserve_volume_flow = .T.'
1178	! ENDIF
1179	! CALL local_stop
1180	! ENDIF
1181	ENDIF
1182
1183	!
1184	!-- Bottom boundary condition for the turbulent Kinetic energy
1185	IF ( bc_e_b == 'neumann' ) THEN
1186	ibc_e_b = 1
1187	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1188	IF ( myid == 0 ) THEN
1189	PRINT*, '+++ WARNING: check_parameters:'
1190	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
1191	ENDIF
1192	ENDIF
1193	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1194	ibc_e_b = 2
1195	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1196	IF ( myid == 0 ) THEN
1197	PRINT*, '+++ WARNING: check_parameters:'
1198	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
1199	ENDIF
1200	ENDIF
1201	IF ( .NOT. prandtl_layer ) THEN
1202	bc_e_b = 'neumann'
1203	ibc_e_b = 1
1204	IF ( myid == 0 ) THEN
1205	PRINT*, '+++ WARNING: check_parameters:'
1206	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
1207	ENDIF
1208	ENDIF
1209	ELSE
1210	IF ( myid == 0 ) THEN
1211	PRINT*, '+++ check_parameters:'
1212	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
1213	ENDIF
1214	CALL local_stop
1215	ENDIF
1216
1217	!
1218	!-- Boundary conditions for perturbation pressure
1219	IF ( bc_p_b == 'dirichlet' ) THEN
1220	ibc_p_b = 0
1221	ELSEIF ( bc_p_b == 'neumann' ) THEN
1222	ibc_p_b = 1
1223	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1224	ibc_p_b = 2
1225	ELSE
1226	IF ( myid == 0 ) THEN
1227	PRINT*, '+++ check_parameters:'
1228	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
1229	ENDIF
1230	CALL local_stop
1231	ENDIF
1232	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1233	IF ( myid == 0 ) THEN
1234	PRINT*, '+++ check_parameters:'
1235	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
1236	' not allowed with'
1237	PRINT*, ' prandtl_layer = .FALSE.'
1238	ENDIF
1239	CALL local_stop
1240	ENDIF
1241	IF ( bc_p_t == 'dirichlet' ) THEN
1242	ibc_p_t = 0
1243	ELSEIF ( bc_p_t == 'neumann' ) THEN
1244	ibc_p_t = 1
1245	ELSE
1246	IF ( myid == 0 ) THEN
1247	PRINT*, '+++ check_parameters:'
1248	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
1249	ENDIF
1250	CALL local_stop
1251	ENDIF
1252
1253	!
1254	!-- Boundary conditions for potential temperature
1255	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1256	ibc_pt_b = 2
1257	ELSE
1258	IF ( bc_pt_b == 'dirichlet' ) THEN
1259	ibc_pt_b = 0
1260	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1261	ibc_pt_b = 1
1262	ELSE
1263	IF ( myid == 0 ) THEN
1264	PRINT*, '+++ check_parameters:'
1265	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
1266	ENDIF
1267	CALL local_stop
1268	ENDIF
1269	ENDIF
1270
1271	IF ( bc_pt_t == 'dirichlet' ) THEN
1272	ibc_pt_t = 0
1273	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1274	ibc_pt_t = 1
1275	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1276	ibc_pt_t = 2
1277	ELSE
1278	IF ( myid == 0 ) THEN
1279	PRINT*, '+++ check_parameters:'
1280	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
1281	ENDIF
1282	CALL local_stop
1283	ENDIF
1284
1285	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1286	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1287	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1288	top_momentumflux_v /= 9999999.9 ) THEN
1289	constant_top_momentumflux = .TRUE.
1290	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1291	top_momentumflux_v == 9999999.9 ) ) THEN
1292	IF ( myid == 0 ) THEN
1293	PRINT*, '+++ check_parameters:'
1294	PRINT*, ' both, top_momentumflux_u AND top_momentumflux_v'
1295	PRINT*, ' must be set'
1296	ENDIF
1297	CALL local_stop
1298	ENDIF
1299
1300	!
1301	!-- A given surface temperature implies Dirichlet boundary condition for
1302	!-- temperature. In this case specification of a constant heat flux is
1303	!-- forbidden.
1304	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1305	surface_heatflux /= 0.0 ) THEN
1306	IF ( myid == 0 ) THEN
1307	PRINT*, '+++ check_parameters:'
1308	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
1309	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
1310	ENDIF
1311	CALL local_stop
1312	ENDIF
1313	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1314	IF ( myid == 0 ) THEN
1315	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
1316	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
1317	pt_surface_initial_change
1318	ENDIF
1319	CALL local_stop
1320	ENDIF
1321
1322	!
1323	!-- A given temperature at the top implies Dirichlet boundary condition for
1324	!-- temperature. In this case specification of a constant heat flux is
1325	!-- forbidden.
1326	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1327	top_heatflux /= 0.0 ) THEN
1328	IF ( myid == 0 ) THEN
1329	PRINT*, '+++ check_parameters:'
1330	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
1331	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
1332	ENDIF
1333	CALL local_stop
1334	ENDIF
1335
1336	!
1337	!-- Boundary conditions for salinity
1338	IF ( ocean ) THEN
1339	IF ( bc_sa_t == 'dirichlet' ) THEN
1340	ibc_sa_t = 0
1341	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1342	ibc_sa_t = 1
1343	ELSE
1344	IF ( myid == 0 ) THEN
1345	PRINT*, '+++ check_parameters:'
1346	PRINT*, ' unknown boundary condition: bc_sa_t = ', bc_sa_t
1347	ENDIF
1348	CALL local_stop
1349	ENDIF
1350
1351	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1352	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1353	IF ( myid == 0 ) THEN
1354	PRINT*, '+++ check_parameters:'
1355	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1356	PRINT*, ' requires to set top_salinityflux '
1357	ENDIF
1358	CALL local_stop
1359	ENDIF
1360
1361	!
1362	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1363	!-- salinity. In this case specification of a constant salinity flux is
1364	!-- forbidden.
1365	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1366	top_salinityflux /= 0.0 ) THEN
1367	IF ( myid == 0 ) THEN
1368	PRINT*, '+++ check_parameters:'
1369	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
1370	PRINT*, ' is not allowed with constant_top_salinityflux = ', &
1371	'.TRUE.'
1372	ENDIF
1373	CALL local_stop
1374	ENDIF
1375
1376	ENDIF
1377
1378	!
1379	!-- In case of humidity or passive scalar, set boundary conditions for total
1380	!-- water content / scalar
1381	IF ( humidity .OR. passive_scalar ) THEN
1382	IF ( humidity ) THEN
1383	sq = 'q'
1384	ELSE
1385	sq = 's'
1386	ENDIF
1387	IF ( bc_q_b == 'dirichlet' ) THEN
1388	ibc_q_b = 0
1389	ELSEIF ( bc_q_b == 'neumann' ) THEN
1390	ibc_q_b = 1
1391	ELSE
1392	IF ( myid == 0 ) THEN
1393	PRINT*, '+++ check_parameters:'
1394	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
1395	ENDIF
1396	CALL local_stop
1397	ENDIF
1398	IF ( bc_q_t == 'dirichlet' ) THEN
1399	ibc_q_t = 0
1400	ELSEIF ( bc_q_t == 'neumann' ) THEN
1401	ibc_q_t = 1
1402	ELSE
1403	IF ( myid == 0 ) THEN
1404	PRINT*, '+++ check_parameters:'
1405	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
1406	ENDIF
1407	CALL local_stop
1408	ENDIF
1409
1410	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1411
1412	!
1413	!-- A given surface humidity implies Dirichlet boundary condition for
1414	!-- humidity. In this case specification of a constant water flux is
1415	!-- forbidden.
1416	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1417	IF ( myid == 0 ) THEN
1418	PRINT*, '+++ check_parameters:'
1419	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
1420	PRINT*, ' is not allowed with prescribed surface flux'
1421	ENDIF
1422	CALL local_stop
1423	ENDIF
1424	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1425	IF ( myid == 0 ) THEN
1426	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
1427	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
1428	' = ', q_surface_initial_change
1429	ENDIF
1430	CALL local_stop
1431	ENDIF
1432
1433	ENDIF
1434
1435	!
1436	!-- Boundary conditions for horizontal components of wind speed
1437	IF ( bc_uv_b == 'dirichlet' ) THEN
1438	ibc_uv_b = 0
1439	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1440	ibc_uv_b = 1
1441	IF ( prandtl_layer ) THEN
1442	IF ( myid == 0 ) THEN
1443	PRINT*, '+++ check_parameters:'
1444	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
1445	' is not allowed with'
1446	PRINT*, ' prandtl_layer = .TRUE.'
1447	ENDIF
1448	CALL local_stop
1449	ENDIF
1450	ELSE
1451	IF ( myid == 0 ) THEN
1452	PRINT*, '+++ check_parameters:'
1453	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
1454	ENDIF
1455	CALL local_stop
1456	ENDIF
1457	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1458	bc_uv_t = 'neumann'
1459	ibc_uv_t = 1
1460	ELSE
1461	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1462	ibc_uv_t = 0
1463	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1464	ibc_uv_t = 1
1465	ELSE
1466	IF ( myid == 0 ) THEN
1467	PRINT*, '+++ check_parameters:'
1468	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
1469	ENDIF
1470	CALL local_stop
1471	ENDIF
1472	ENDIF
1473
1474	!
1475	!-- Compute and check, respectively, the Rayleigh Damping parameter
1476	IF ( rayleigh_damping_factor == -1.0 ) THEN
1477	IF ( momentum_advec == 'ups-scheme' ) THEN
1478	rayleigh_damping_factor = 0.01
1479	ELSE
1480	rayleigh_damping_factor = 0.0
1481	ENDIF
1482	ELSE
1483	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1484	THEN
1485	IF ( myid == 0 ) THEN
1486	PRINT*, '+++ check_parameters:'
1487	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
1488	' out of range [0.0,1.0]'
1489	ENDIF
1490	CALL local_stop
1491	ENDIF
1492	ENDIF
1493
1494	IF ( rayleigh_damping_height == -1.0 ) THEN
1495	IF ( .NOT. ocean ) THEN
1496	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1497	ELSE
1498	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1499	ENDIF
1500	ELSE
1501	IF ( .NOT. ocean ) THEN
1502	IF ( rayleigh_damping_height < 0.0 .OR. &
1503	rayleigh_damping_height > zu(nzt) ) THEN
1504	IF ( myid == 0 ) THEN
1505	PRINT*, '+++ check_parameters:'
1506	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1507	' out of range [0.0,', zu(nzt), ']'
1508	ENDIF
1509	CALL local_stop
1510	ENDIF
1511	ELSE
1512	IF ( rayleigh_damping_height > 0.0 .OR. &
1513	rayleigh_damping_height < zu(nzb) ) THEN
1514	IF ( myid == 0 ) THEN
1515	PRINT*, '+++ check_parameters:'
1516	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
1517	' out of range [0.0,', zu(nzb), ']'
1518	ENDIF
1519	CALL local_stop
1520	ENDIF
1521	ENDIF
1522	ENDIF
1523
1524	!
1525	!-- Check limiters for Upstream-Spline scheme
1526	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1527	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1528	overshoot_limit_e < 0.0 ) THEN
1529	IF ( myid == 0 ) THEN
1530	PRINT*, '+++ check_parameters:'
1531	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
1532	ENDIF
1533	CALL local_stop
1534	ENDIF
1535	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1536	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1537	IF ( myid == 0 ) THEN
1538	PRINT*, '+++ check_parameters:'
1539	PRINT*, ' ups_limit_... < 0.0 is not allowed'
1540	ENDIF
1541	CALL local_stop
1542	ENDIF
1543
1544	!
1545	!-- Check number of chosen statistic regions. More than 10 regions are not
1546	!-- allowed, because so far no more than 10 corresponding output files can
1547	!-- be opened (cf. check_open)
1548	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1549	IF ( myid == 0 ) THEN
1550	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
1551	statistic_regions+1
1552	PRINT*, ' Only 10 regions are allowed'
1553	ENDIF
1554	CALL local_stop
1555	ENDIF
1556	IF ( normalizing_region > statistic_regions .OR. &
1557	normalizing_region < 0) THEN
1558	IF ( myid == 0 ) THEN
1559	PRINT*, '+++ check_parameters: normalizing_region = ', &
1560	normalizing_region, ' is unknown'
1561	PRINT*, ' Must be <= ', statistic_regions
1562	ENDIF
1563	CALL local_stop
1564	ENDIF
1565
1566	!
1567	!-- Check the interval for sorting particles.
1568	!-- Using particles as cloud droplets requires sorting after each timestep.
1569	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1570	dt_sort_particles = 0.0
1571	IF ( myid == 0 ) THEN
1572	PRINT*, '+++ WARNING: check_parameters:'
1573	PRINT*, ' dt_sort_particles is reset to 0.0 because ', &
1574	'of cloud_droplets = .TRUE.'
1575	ENDIF
1576	ENDIF
1577
1578	!
1579	!-- Set the default intervals for data output, if necessary
1580	!-- NOTE: dt_dosp has already been set in package_parin
1581	IF ( dt_data_output /= 9999999.9 ) THEN
1582	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1583	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1584	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1585	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1586	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1587	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1588	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1589	ENDIF
1590
1591	!
1592	!-- Set the default skip time intervals for data output, if necessary
1593	IF ( skip_time_dopr == 9999999.9 ) &
1594	skip_time_dopr = skip_time_data_output
1595	IF ( skip_time_dosp == 9999999.9 ) &
1596	skip_time_dosp = skip_time_data_output
1597	IF ( skip_time_do2d_xy == 9999999.9 ) &
1598	skip_time_do2d_xy = skip_time_data_output
1599	IF ( skip_time_do2d_xz == 9999999.9 ) &
1600	skip_time_do2d_xz = skip_time_data_output
1601	IF ( skip_time_do2d_yz == 9999999.9 ) &
1602	skip_time_do2d_yz = skip_time_data_output
1603	IF ( skip_time_do3d == 9999999.9 ) &
1604	skip_time_do3d = skip_time_data_output
1605	IF ( skip_time_data_output_av == 9999999.9 ) &
1606	skip_time_data_output_av = skip_time_data_output
1607
1608	!
1609	!-- Check the average intervals (first for 3d-data, then for profiles and
1610	!-- spectra)
1611	IF ( averaging_interval > dt_data_output_av ) THEN
1612	IF ( myid == 0 ) THEN
1613	PRINT*, '+++ check_parameters: average_interval=', &
1614	averaging_interval, ' must be <= dt_data_output=', &
1615	dt_data_output
1616	ENDIF
1617	CALL local_stop
1618	ENDIF
1619
1620	IF ( averaging_interval_pr == 9999999.9 ) THEN
1621	averaging_interval_pr = averaging_interval
1622	ENDIF
1623
1624	IF ( averaging_interval_pr > dt_dopr ) THEN
1625	IF ( myid == 0 ) THEN
1626	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
1627	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
1628	ENDIF
1629	CALL local_stop
1630	ENDIF
1631
1632	IF ( averaging_interval_sp == 9999999.9 ) THEN
1633	averaging_interval_sp = averaging_interval
1634	ENDIF
1635
1636	IF ( averaging_interval_sp > dt_dosp ) THEN
1637	IF ( myid == 0 ) THEN
1638	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
1639	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
1640	ENDIF
1641	CALL local_stop
1642	ENDIF
1643
1644	!
1645	!-- Set the default interval for profiles entering the temporal average
1646	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1647	dt_averaging_input_pr = dt_averaging_input
1648	ENDIF
1649
1650	!
1651	!-- Set the default interval for the output of timeseries to a reasonable
1652	!-- value (tries to minimize the number of calls of flow_statistics)
1653	IF ( dt_dots == 9999999.9 ) THEN
1654	IF ( averaging_interval_pr == 0.0 ) THEN
1655	dt_dots = MIN( dt_run_control, dt_dopr )
1656	ELSE
1657	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1658	ENDIF
1659	ENDIF
1660
1661	!
1662	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1663	IF ( dt_averaging_input > averaging_interval ) THEN
1664	IF ( myid == 0 ) THEN
1665	PRINT*, '+++ check_parameters: dt_averaging_input=', &
1666	dt_averaging_input, ' must be <= averaging_interval=', &
1667	averaging_interval
1668	ENDIF
1669	CALL local_stop
1670	ENDIF
1671
1672	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1673	IF ( myid == 0 ) THEN
1674	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
1675	dt_averaging_input_pr, &
1676	' must be <= averaging_interval_pr=', &
1677	averaging_interval_pr
1678	ENDIF
1679	CALL local_stop
1680	ENDIF
1681
1682	!
1683	!-- Set the default value for the integration interval of precipitation amount
1684	IF ( precipitation ) THEN
1685	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1686	precipitation_amount_interval = dt_do2d_xy
1687	ELSE
1688	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1689	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
1690	'precipitation_amount_interval =', &
1691	precipitation_amount_interval, &
1692	' must not be larger than dt_do2d_xy', &
1693	' = ', dt_do2d_xy
1694	CALL local_stop
1695	ENDIF
1696	ENDIF
1697	ENDIF
1698
1699	!
1700	!-- Determine the number of output profiles and check whether they are
1701	!-- permissible
1702	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1703
1704	dopr_n = dopr_n + 1
1705	i = dopr_n
1706
1707	!
1708	!-- Determine internal profile number (for hom, homs)
1709	!-- and store height levels
1710	SELECT CASE ( TRIM( data_output_pr(i) ) )
1711
1712	CASE ( 'u', '#u' )
1713	dopr_index(i) = 1
1714	dopr_unit(i) = 'm/s'
1715	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1716	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1717	dopr_initial_index(i) = 5
1718	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1719	data_output_pr(i) = data_output_pr(i)(2:)
1720	ENDIF
1721
1722	CASE ( 'v', '#v' )
1723	dopr_index(i) = 2
1724	dopr_unit(i) = 'm/s'
1725	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1726	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1727	dopr_initial_index(i) = 6
1728	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1729	data_output_pr(i) = data_output_pr(i)(2:)
1730	ENDIF
1731
1732	CASE ( 'w' )
1733	dopr_index(i) = 3
1734	dopr_unit(i) = 'm/s'
1735	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1736
1737	CASE ( 'pt', '#pt' )
1738	IF ( .NOT. cloud_physics ) THEN
1739	dopr_index(i) = 4
1740	dopr_unit(i) = 'K'
1741	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1742	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1743	dopr_initial_index(i) = 7
1744	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1745	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1746	data_output_pr(i) = data_output_pr(i)(2:)
1747	ENDIF
1748	ELSE
1749	dopr_index(i) = 43
1750	dopr_unit(i) = 'K'
1751	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1752	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1753	dopr_initial_index(i) = 28
1754	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1755	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1756	data_output_pr(i) = data_output_pr(i)(2:)
1757	ENDIF
1758	ENDIF
1759
1760	CASE ( 'e' )
1761	dopr_index(i) = 8
1762	dopr_unit(i) = 'm2/s2'
1763	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1764	hom(nzb,2,8,:) = 0.0
1765
1766	CASE ( 'km', '#km' )
1767	dopr_index(i) = 9
1768	dopr_unit(i) = 'm2/s'
1769	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1770	hom(nzb,2,9,:) = 0.0
1771	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1772	dopr_initial_index(i) = 23
1773	hom(:,2,23,:) = hom(:,2,9,:)
1774	data_output_pr(i) = data_output_pr(i)(2:)
1775	ENDIF
1776
1777	CASE ( 'kh', '#kh' )
1778	dopr_index(i) = 10
1779	dopr_unit(i) = 'm2/s'
1780	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1781	hom(nzb,2,10,:) = 0.0
1782	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1783	dopr_initial_index(i) = 24
1784	hom(:,2,24,:) = hom(:,2,10,:)
1785	data_output_pr(i) = data_output_pr(i)(2:)
1786	ENDIF
1787
1788	CASE ( 'l', '#l' )
1789	dopr_index(i) = 11
1790	dopr_unit(i) = 'm'
1791	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1792	hom(nzb,2,11,:) = 0.0
1793	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1794	dopr_initial_index(i) = 25
1795	hom(:,2,25,:) = hom(:,2,11,:)
1796	data_output_pr(i) = data_output_pr(i)(2:)
1797	ENDIF
1798
1799	CASE ( 'w"u"' )
1800	dopr_index(i) = 12
1801	dopr_unit(i) = 'm2/s2'
1802	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1803	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1804
1805	CASE ( 'wu' )
1806	dopr_index(i) = 13
1807	dopr_unit(i) = 'm2/s2'
1808	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1809
1810	CASE ( 'w"v"' )
1811	dopr_index(i) = 14
1812	dopr_unit(i) = 'm2/s2'
1813	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1814	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1815
1816	CASE ( 'wv' )
1817	dopr_index(i) = 15
1818	dopr_unit(i) = 'm2/s2'
1819	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1820
1821	CASE ( 'w"pt"' )
1822	dopr_index(i) = 16
1823	dopr_unit(i) = 'K m/s'
1824	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1825
1826	CASE ( 'wpt' )
1827	dopr_index(i) = 17
1828	dopr_unit(i) = 'K m/s'
1829	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1830
1831	CASE ( 'wpt' )
1832	dopr_index(i) = 18
1833	dopr_unit(i) = 'K m/s'
1834	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1835
1836	CASE ( 'wu' )
1837	dopr_index(i) = 19
1838	dopr_unit(i) = 'm2/s2'
1839	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1840	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1841
1842	CASE ( 'wv' )
1843	dopr_index(i) = 20
1844	dopr_unit(i) = 'm2/s2'
1845	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1846	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1847
1848	CASE ( 'wptBC' )
1849	dopr_index(i) = 21
1850	dopr_unit(i) = 'K m/s'
1851	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1852
1853	CASE ( 'wptBC' )
1854	dopr_index(i) = 22
1855	dopr_unit(i) = 'K m/s'
1856	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1857
1858	CASE ( 'sa', '#sa' )
1859	IF ( .NOT. ocean ) THEN
1860	IF ( myid == 0 ) THEN
1861	PRINT*, '+++ check_parameters: data_output_pr = ', &
1862	data_output_pr(i), &
1863	' is not implemented for ocean = FALSE'
1864	ENDIF
1865	CALL local_stop
1866	ELSE
1867	dopr_index(i) = 23
1868	dopr_unit(i) = 'psu'
1869	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1870	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1871	dopr_initial_index(i) = 26
1872	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1873	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1874	data_output_pr(i) = data_output_pr(i)(2:)
1875	ENDIF
1876	ENDIF
1877
1878	CASE ( 'u*2' )
1879	dopr_index(i) = 30
1880	dopr_unit(i) = 'm2/s2'
1881	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1882
1883	CASE ( 'v*2' )
1884	dopr_index(i) = 31
1885	dopr_unit(i) = 'm2/s2'
1886	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1887
1888	CASE ( 'w*2' )
1889	dopr_index(i) = 32
1890	dopr_unit(i) = 'm2/s2'
1891	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1892
1893	CASE ( 'pt*2' )
1894	dopr_index(i) = 33
1895	dopr_unit(i) = 'K2'
1896	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1897
1898	CASE ( 'e*' )
1899	dopr_index(i) = 34
1900	dopr_unit(i) = 'm2/s2'
1901	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1902
1903	CASE ( 'w2pt' )
1904	dopr_index(i) = 35
1905	dopr_unit(i) = 'K m2/s2'
1906	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1907
1908	CASE ( 'wpt2' )
1909	dopr_index(i) = 36
1910	dopr_unit(i) = 'K2 m/s'
1911	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1912
1913	CASE ( 'we' )
1914	dopr_index(i) = 37
1915	dopr_unit(i) = 'm3/s3'
1916	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1917
1918	CASE ( 'w*3' )
1919	dopr_index(i) = 38
1920	dopr_unit(i) = 'm3/s3'
1921	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1922
1923	CASE ( 'Sw' )
1924	dopr_index(i) = 39
1925	dopr_unit(i) = 'none'
1926	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1927
1928	CASE ( 'q', '#q' )
1929	IF ( .NOT. humidity ) THEN
1930	IF ( myid == 0 ) THEN
1931	PRINT*, '+++ check_parameters: data_output_pr = ', &
1932	data_output_pr(i), &
1933	' is not implemented for humidity = FALSE'
1934	ENDIF
1935	CALL local_stop
1936	ELSE
1937	dopr_index(i) = 41
1938	dopr_unit(i) = 'kg/kg'
1939	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1940	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1941	dopr_initial_index(i) = 26
1942	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1943	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1944	data_output_pr(i) = data_output_pr(i)(2:)
1945	ENDIF
1946	ENDIF
1947
1948	CASE ( 's', '#s' )
1949	IF ( .NOT. passive_scalar ) THEN
1950	IF ( myid == 0 ) THEN
1951	PRINT*, '+++ check_parameters: data_output_pr = ', &
1952	data_output_pr(i), &
1953	' is not implemented for passive_scalar = FALSE'
1954	ENDIF
1955	CALL local_stop
1956	ELSE
1957	dopr_index(i) = 41
1958	dopr_unit(i) = 'kg/m3'
1959	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1960	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1961	dopr_initial_index(i) = 26
1962	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1963	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1964	data_output_pr(i) = data_output_pr(i)(2:)
1965	ENDIF
1966	ENDIF
1967
1968	CASE ( 'qv', '#qv' )
1969	IF ( .NOT. cloud_physics ) THEN
1970	dopr_index(i) = 41
1971	dopr_unit(i) = 'kg/kg'
1972	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1973	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1974	dopr_initial_index(i) = 26
1975	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1976	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1977	data_output_pr(i) = data_output_pr(i)(2:)
1978	ENDIF
1979	ELSE
1980	dopr_index(i) = 42
1981	dopr_unit(i) = 'kg/kg'
1982	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1983	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1984	dopr_initial_index(i) = 27
1985	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1986	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1987	data_output_pr(i) = data_output_pr(i)(2:)
1988	ENDIF
1989	ENDIF
1990
1991	CASE ( 'lpt', '#lpt' )
1992	IF ( .NOT. cloud_physics ) THEN
1993	IF ( myid == 0 ) THEN
1994	PRINT*, '+++ check_parameters: data_output_pr = ', &
1995	data_output_pr(i), &
1996	' is not implemented for cloud_physics = FALSE'
1997	ENDIF
1998	CALL local_stop
1999	ELSE
2000	dopr_index(i) = 4
2001	dopr_unit(i) = 'K'
2002	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2003	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2004	dopr_initial_index(i) = 7
2005	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2006	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2007	data_output_pr(i) = data_output_pr(i)(2:)
2008	ENDIF
2009	ENDIF
2010
2011	CASE ( 'vpt', '#vpt' )
2012	dopr_index(i) = 44
2013	dopr_unit(i) = 'K'
2014	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2015	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2016	dopr_initial_index(i) = 29
2017	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2018	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2019	data_output_pr(i) = data_output_pr(i)(2:)
2020	ENDIF
2021
2022	CASE ( 'w"vpt"' )
2023	dopr_index(i) = 45
2024	dopr_unit(i) = 'K m/s'
2025	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2026
2027	CASE ( 'wvpt' )
2028	dopr_index(i) = 46
2029	dopr_unit(i) = 'K m/s'
2030	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2031
2032	CASE ( 'wvpt' )
2033	dopr_index(i) = 47
2034	dopr_unit(i) = 'K m/s'
2035	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2036
2037	CASE ( 'w"q"' )
2038	IF ( .NOT. humidity ) THEN
2039	IF ( myid == 0 ) THEN
2040	PRINT*, '+++ check_parameters: data_output_pr = ', &
2041	data_output_pr(i), &
2042	' is not implemented for humidity = FALSE'
2043	ENDIF
2044	CALL local_stop
2045	ELSE
2046	dopr_index(i) = 48
2047	dopr_unit(i) = 'kg/kg m/s'
2048	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2049	ENDIF
2050
2051	CASE ( 'wq' )
2052	IF ( .NOT. humidity ) THEN
2053	IF ( myid == 0 ) THEN
2054	PRINT*, '+++ check_parameters: data_output_pr = ', &
2055	data_output_pr(i), &
2056	' is not implemented for humidity = FALSE'
2057	ENDIF
2058	CALL local_stop
2059	ELSE
2060	dopr_index(i) = 49
2061	dopr_unit(i) = 'kg/kg m/s'
2062	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2063	ENDIF
2064
2065	CASE ( 'wq' )
2066	IF ( .NOT. humidity ) THEN
2067	IF ( myid == 0 ) THEN
2068	PRINT*, '+++ check_parameters: data_output_pr = ', &
2069	data_output_pr(i), &
2070	' is not implemented for humidity = FALSE'
2071	ENDIF
2072	CALL local_stop
2073	ELSE
2074	dopr_index(i) = 50
2075	dopr_unit(i) = 'kg/kg m/s'
2076	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2077	ENDIF
2078
2079	CASE ( 'w"s"' )
2080	IF ( .NOT. passive_scalar ) THEN
2081	IF ( myid == 0 ) THEN
2082	PRINT*, '+++ check_parameters: data_output_pr = ', &
2083	data_output_pr(i), &
2084	' is not implemented for passive_scalar = FALSE'
2085	ENDIF
2086	CALL local_stop
2087	ELSE
2088	dopr_index(i) = 48
2089	dopr_unit(i) = 'kg/m3 m/s'
2090	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2091	ENDIF
2092
2093	CASE ( 'ws' )
2094	IF ( .NOT. passive_scalar ) THEN
2095	IF ( myid == 0 ) THEN
2096	PRINT*, '+++ check_parameters: data_output_pr = ', &
2097	data_output_pr(i), &
2098	' is not implemented for passive_scalar = FALSE'
2099	ENDIF
2100	CALL local_stop
2101	ELSE
2102	dopr_index(i) = 49
2103	dopr_unit(i) = 'kg/m3 m/s'
2104	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2105	ENDIF
2106
2107	CASE ( 'ws' )
2108	IF ( .NOT. passive_scalar ) THEN
2109	IF ( myid == 0 ) THEN
2110	PRINT*, '+++ check_parameters: data_output_pr = ', &
2111	data_output_pr(i), &
2112	' is not implemented for passive_scalar = FALSE'
2113	ENDIF
2114	CALL local_stop
2115	ELSE
2116	dopr_index(i) = 50
2117	dopr_unit(i) = 'kg/m3 m/s'
2118	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2119	ENDIF
2120
2121	CASE ( 'w"qv"' )
2122	IF ( humidity .AND. .NOT. cloud_physics ) &
2123	THEN
2124	dopr_index(i) = 48
2125	dopr_unit(i) = 'kg/kg m/s'
2126	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2127	ELSEIF( humidity .AND. cloud_physics ) THEN
2128	dopr_index(i) = 51
2129	dopr_unit(i) = 'kg/kg m/s'
2130	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2131	ELSE
2132	IF ( myid == 0 ) THEN
2133	PRINT*, '+++ check_parameters: data_output_pr = ', &
2134	data_output_pr(i), &
2135	' is not implemented for cloud_physics = FALSE', &
2136	' and humidity = FALSE'
2137	ENDIF
2138	CALL local_stop
2139	ENDIF
2140
2141	CASE ( 'wqv' )
2142	IF ( humidity .AND. .NOT. cloud_physics ) &
2143	THEN
2144	dopr_index(i) = 49
2145	dopr_unit(i) = 'kg/kg m/s'
2146	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2147	ELSEIF( humidity .AND. cloud_physics ) THEN
2148	dopr_index(i) = 52
2149	dopr_unit(i) = 'kg/kg m/s'
2150	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2151	ELSE
2152	IF ( myid == 0 ) THEN
2153	PRINT*, '+++ check_parameters: data_output_pr = ', &
2154	data_output_pr(i), &
2155	' is not implemented for cloud_physics = FALSE', &
2156	' and humidity = FALSE'
2157	ENDIF
2158	CALL local_stop
2159	ENDIF
2160
2161	CASE ( 'wqv' )
2162	IF ( humidity .AND. .NOT. cloud_physics ) &
2163	THEN
2164	dopr_index(i) = 50
2165	dopr_unit(i) = 'kg/kg m/s'
2166	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2167	ELSEIF( humidity .AND. cloud_physics ) THEN
2168	dopr_index(i) = 53
2169	dopr_unit(i) = 'kg/kg m/s'
2170	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2171	ELSE
2172	IF ( myid == 0 ) THEN
2173	PRINT*, '+++ check_parameters: data_output_pr = ', &
2174	data_output_pr(i), &
2175	' is not implemented for cloud_physics = FALSE', &
2176	' and humidity = FALSE'
2177	ENDIF
2178	CALL local_stop
2179	ENDIF
2180
2181	CASE ( 'ql' )
2182	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2183	IF ( myid == 0 ) THEN
2184	PRINT*, '+++ check_parameters: data_output_pr = ', &
2185	data_output_pr(i), &
2186	' is not implemented for cloud_physics = FALSE'
2187	ENDIF
2188	CALL local_stop
2189	ELSE
2190	dopr_index(i) = 54
2191	dopr_unit(i) = 'kg/kg'
2192	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2193	ENDIF
2194
2195	CASE ( 'wuu*/dz' )
2196	dopr_index(i) = 55
2197	dopr_unit(i) = 'm2/s3'
2198	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2199
2200	CASE ( 'wp/dz' )
2201	dopr_index(i) = 56
2202	dopr_unit(i) = 'm2/s3'
2203	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2204
2205	CASE ( 'w"e/dz' )
2206	dopr_index(i) = 57
2207	dopr_unit(i) = 'm2/s3'
2208	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2209
2210	CASE ( 'u"pt"' )
2211	dopr_index(i) = 58
2212	dopr_unit(i) = 'K m/s'
2213	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2214
2215	CASE ( 'upt' )
2216	dopr_index(i) = 59
2217	dopr_unit(i) = 'K m/s'
2218	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2219
2220	CASE ( 'upt_t' )
2221	dopr_index(i) = 60
2222	dopr_unit(i) = 'K m/s'
2223	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2224
2225	CASE ( 'v"pt"' )
2226	dopr_index(i) = 61
2227	dopr_unit(i) = 'K m/s'
2228	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2229
2230	CASE ( 'vpt' )
2231	dopr_index(i) = 62
2232	dopr_unit(i) = 'K m/s'
2233	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2234
2235	CASE ( 'vpt_t' )
2236	dopr_index(i) = 63
2237	dopr_unit(i) = 'K m/s'
2238	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2239
2240	CASE ( 'rho' )
2241	dopr_index(i) = 64
2242	dopr_unit(i) = 'kg/m3'
2243	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2244
2245	CASE ( 'w"sa"' )
2246	IF ( .NOT. ocean ) THEN
2247	IF ( myid == 0 ) THEN
2248	PRINT*, '+++ check_parameters: data_output_pr = ', &
2249	data_output_pr(i), &
2250	' is not implemented for ocean = FALSE'
2251	ENDIF
2252	CALL local_stop
2253	ELSE
2254	dopr_index(i) = 65
2255	dopr_unit(i) = 'psu m/s'
2256	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2257	ENDIF
2258
2259	CASE ( 'wsa' )
2260	IF ( .NOT. ocean ) THEN
2261	IF ( myid == 0 ) THEN
2262	PRINT*, '+++ check_parameters: data_output_pr = ', &
2263	data_output_pr(i), &
2264	' is not implemented for ocean = FALSE'
2265	ENDIF
2266	CALL local_stop
2267	ELSE
2268	dopr_index(i) = 66
2269	dopr_unit(i) = 'psu m/s'
2270	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2271	ENDIF
2272
2273	CASE ( 'wsa' )
2274	IF ( .NOT. ocean ) THEN
2275	IF ( myid == 0 ) THEN
2276	PRINT*, '+++ check_parameters: data_output_pr = ', &
2277	data_output_pr(i), &
2278	' is not implemented for ocean = FALSE'
2279	ENDIF
2280	CALL local_stop
2281	ELSE
2282	dopr_index(i) = 67
2283	dopr_unit(i) = 'psu m/s'
2284	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2285	ENDIF
2286
2287	CASE ( 'wp' )
2288	dopr_index(i) = 68
2289	dopr_unit(i) = 'm3/s3'
2290	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2291
2292	CASE ( 'w"e' )
2293	dopr_index(i) = 69
2294	dopr_unit(i) = 'm3/s3'
2295	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2296
2297
2298	CASE DEFAULT
2299
2300	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2301
2302	IF ( unit == 'illegal' ) THEN
2303	IF ( myid == 0 ) THEN
2304	IF ( data_output_pr_user(1) /= ' ' ) THEN
2305	PRINT*, '+++ check_parameters: illegal value for data_',&
2306	'output_pr or data_output_pr_user: "', &
2307	TRIM( data_output_pr(i) ), '"'
2308	ELSE
2309	PRINT*, '+++ check_parameters: illegal value for data_',&
2310	'output_pr: "', TRIM( data_output_pr(i) ),'"'
2311	ENDIF
2312	ENDIF
2313	CALL local_stop
2314	ENDIF
2315
2316	END SELECT
2317	!
2318	!-- Check to which of the predefined coordinate systems the profile belongs
2319	DO k = 1, crmax
2320	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2321	/=0 ) &
2322	THEN
2323	dopr_crossindex(i) = k
2324	EXIT
2325	ENDIF
2326	ENDDO
2327	!
2328	!-- Generate the text for the labels of the PROFIL output file. "-characters
2329	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2330	!-- control characters
2331	dopr_label(i) = data_output_pr(i)
2332	position = INDEX( dopr_label(i) , '"' )
2333	DO WHILE ( position /= 0 )
2334	dopr_label(i)(position:position) = ''''
2335	position = INDEX( dopr_label(i) , '"' )
2336	ENDDO
2337
2338	ENDDO
2339
2340	!
2341	!-- y-value range of the coordinate system (PROFIL).
2342	!-- x-value range determined in plot_1d.
2343	IF ( .NOT. ocean ) THEN
2344	cross_uymin = 0.0
2345	IF ( z_max_do1d == -1.0 ) THEN
2346	cross_uymax = zu(nzt+1)
2347	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2348	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
2349	z_max_do1d,' must be >= ', zu(nzb+1), &
2350	' or <= ', zu(nzt+1)
2351	CALL local_stop
2352	ELSE
2353	cross_uymax = z_max_do1d
2354	ENDIF
2355	ENDIF
2356
2357	!
2358	!-- Check whether the chosen normalizing factor for the coordinate systems is
2359	!-- permissible
2360	DO i = 1, crmax
2361	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2362
2363	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2364	j = 0
2365
2366	CASE DEFAULT
2367	IF ( myid == 0 ) THEN
2368	PRINT*, '+++ check_parameters: unknown normalize method'
2369	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
2370	ENDIF
2371	CALL local_stop
2372
2373	END SELECT
2374	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2375
2376	CASE ( '', 'z_i' )
2377	j = 0
2378
2379	CASE DEFAULT
2380	IF ( myid == 0 ) THEN
2381	PRINT*, '+++ check_parameters: unknown normalize method'
2382	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
2383	ENDIF
2384	CALL local_stop
2385
2386	END SELECT
2387	ENDDO
2388	!
2389	!-- Check normalized y-value range of the coordinate system (PROFIL)
2390	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2391	THEN
2392	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
2393	'd=', z_max_do1d_normalized, ' must be >= 0.0'
2394	CALL local_stop
2395	ENDIF
2396
2397
2398	!
2399	!-- Append user-defined data output variables to the standard data output
2400	IF ( data_output_user(1) /= ' ' ) THEN
2401	i = 1
2402	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2403	i = i + 1
2404	ENDDO
2405	j = 1
2406	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2407	IF ( i > 100 ) THEN
2408	IF ( myid == 0 ) THEN
2409	PRINT*, '+++ check_parameters: number of output quantitities', &
2410	' given by data_output and data_output_user'
2411	PRINT*, ' exceeds the limit of 100'
2412	ENDIF
2413	CALL local_stop
2414	ENDIF
2415	data_output(i) = data_output_user(j)
2416	i = i + 1
2417	j = j + 1
2418	ENDDO
2419	ENDIF
2420
2421	!
2422	!-- Check and set steering parameters for 2d/3d data output and averaging
2423	i = 1
2424	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2425	!
2426	!-- Check for data averaging
2427	ilen = LEN_TRIM( data_output(i) )
2428	j = 0 ! no data averaging
2429	IF ( ilen > 3 ) THEN
2430	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2431	j = 1 ! data averaging
2432	data_output(i) = data_output(i)(1:ilen-3)
2433	ENDIF
2434	ENDIF
2435	!
2436	!-- Check for cross section or volume data
2437	ilen = LEN_TRIM( data_output(i) )
2438	k = 0 ! 3d data
2439	var = data_output(i)(1:ilen)
2440	IF ( ilen > 3 ) THEN
2441	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2442	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2443	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2444	k = 1 ! 2d data
2445	var = data_output(i)(1:ilen-3)
2446	ENDIF
2447	ENDIF
2448	!
2449	!-- Check for allowed value and set units
2450	SELECT CASE ( TRIM( var ) )
2451
2452	CASE ( 'e' )
2453	IF ( constant_diffusion ) THEN
2454	IF ( myid == 0 ) THEN
2455	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2456	'" requires constant_diffusion = .FALSE.'
2457	ENDIF
2458	CALL local_stop
2459	ENDIF
2460	unit = 'm2/s2'
2461
2462	CASE ( 'pc', 'pr' )
2463	IF ( .NOT. particle_advection ) THEN
2464	IF ( myid == 0 ) THEN
2465	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2466	'" requires a "particles_par"-NAMELIST'
2467	PRINT*, ' in the parameter file (PARIN)'
2468	ENDIF
2469	CALL local_stop
2470	ENDIF
2471	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2472	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2473
2474	CASE ( 'q', 'vpt' )
2475	IF ( .NOT. humidity ) THEN
2476	IF ( myid == 0 ) THEN
2477	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2478	'" requires humidity = .TRUE.'
2479	ENDIF
2480	CALL local_stop
2481	ENDIF
2482	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2483	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2484
2485	CASE ( 'ql' )
2486	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2487	IF ( myid == 0 ) THEN
2488	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2489	'" requires cloud_physics = .TRUE.'
2490	PRINT*, ' or cloud_droplets = .TRUE.'
2491	ENDIF
2492	CALL local_stop
2493	ENDIF
2494	unit = 'kg/kg'
2495
2496	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2497	IF ( .NOT. cloud_droplets ) THEN
2498	IF ( myid == 0 ) THEN
2499	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2500	'" requires cloud_droplets = .TRUE.'
2501	ENDIF
2502	CALL local_stop
2503	ENDIF
2504	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2505	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2506	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2507
2508	CASE ( 'qv' )
2509	IF ( .NOT. cloud_physics ) THEN
2510	IF ( myid == 0 ) THEN
2511	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2512	'" requires cloud_physics = .TRUE.'
2513	ENDIF
2514	CALL local_stop
2515	ENDIF
2516	unit = 'kg/kg'
2517
2518	CASE ( 'rho' )
2519	IF ( .NOT. ocean ) THEN
2520	IF ( myid == 0 ) THEN
2521	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2522	'" requires ocean = .TRUE.'
2523	ENDIF
2524	CALL local_stop
2525	ENDIF
2526	unit = 'kg/m3'
2527
2528	CASE ( 's' )
2529	IF ( .NOT. passive_scalar ) THEN
2530	IF ( myid == 0 ) THEN
2531	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2532	'" requires passive_scalar = .TRUE.'
2533	ENDIF
2534	CALL local_stop
2535	ENDIF
2536	unit = 'conc'
2537
2538	CASE ( 'sa' )
2539	IF ( .NOT. ocean ) THEN
2540	IF ( myid == 0 ) THEN
2541	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2542	'" requires ocean = .TRUE.'
2543	ENDIF
2544	CALL local_stop
2545	ENDIF
2546	unit = 'psu'
2547
2548	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2549	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2550	IF ( myid == 0 ) THEN
2551	PRINT*, '+++ check_parameters: illegal value for data_',&
2552	'output: "', TRIM( var ), '" is only allowed'
2553	PRINT*, ' for horizontal cross section'
2554	ENDIF
2555	CALL local_stop
2556	ENDIF
2557	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2558	IF ( myid == 0 ) THEN
2559	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2560	'" requires cloud_physics = .TRUE.'
2561	ENDIF
2562	CALL local_stop
2563	ENDIF
2564	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2565	IF ( myid == 0 ) THEN
2566	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2567	'" requires precipitation = .TRUE.'
2568	ENDIF
2569	CALL local_stop
2570	ENDIF
2571	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2572	IF ( myid == 0 ) THEN
2573	PRINT*, '+++ check_parameters: temporal averaging of ', &
2574	' precipitation amount "', TRIM( var ), &
2575	'" not possible'
2576	ENDIF
2577	CALL local_stop
2578	ENDIF
2579	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2580	IF ( myid == 0 ) THEN
2581	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
2582	'" requires precipitation = .TRUE.'
2583	ENDIF
2584	CALL local_stop
2585	ENDIF
2586
2587
2588	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2589	IF ( TRIM( var ) == 't*' ) unit = 'K'
2590	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2591	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2592	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2593	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2594
2595	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2596	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2597	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2598	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2599	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2600	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2601	CONTINUE
2602
2603	CASE DEFAULT
2604	CALL user_check_data_output( var, unit )
2605
2606	IF ( unit == 'illegal' ) THEN
2607	IF ( myid == 0 ) THEN
2608	IF ( data_output_user(1) /= ' ' ) THEN
2609	PRINT*, '+++ check_parameters: illegal value for data_',&
2610	'output or data_output_user: "', &
2611	TRIM( data_output(i) ), '"'
2612	ELSE
2613	PRINT*, '+++ check_parameters: illegal value for data_',&
2614	'output: "', TRIM( data_output(i) ), '"'
2615	ENDIF
2616	ENDIF
2617	CALL local_stop
2618	ENDIF
2619
2620	END SELECT
2621	!
2622	!-- Set the internal steering parameters appropriately
2623	IF ( k == 0 ) THEN
2624	do3d_no(j) = do3d_no(j) + 1
2625	do3d(j,do3d_no(j)) = data_output(i)
2626	do3d_unit(j,do3d_no(j)) = unit
2627	ELSE
2628	do2d_no(j) = do2d_no(j) + 1
2629	do2d(j,do2d_no(j)) = data_output(i)
2630	do2d_unit(j,do2d_no(j)) = unit
2631	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2632	data_output_xy(j) = .TRUE.
2633	ENDIF
2634	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2635	data_output_xz(j) = .TRUE.
2636	ENDIF
2637	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2638	data_output_yz(j) = .TRUE.
2639	ENDIF
2640	ENDIF
2641
2642	IF ( j == 1 ) THEN
2643	!
2644	!-- Check, if variable is already subject to averaging
2645	found = .FALSE.
2646	DO k = 1, doav_n
2647	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2648	ENDDO
2649
2650	IF ( .NOT. found ) THEN
2651	doav_n = doav_n + 1
2652	doav(doav_n) = var
2653	ENDIF
2654	ENDIF
2655
2656	i = i + 1
2657	ENDDO
2658
2659	!
2660	!-- Store sectional planes in one shared array
2661	section(:,1) = section_xy
2662	section(:,2) = section_xz
2663	section(:,3) = section_yz
2664
2665	!
2666	!-- Upper plot limit (grid point value) for 1D profiles
2667	IF ( z_max_do1d == -1.0 ) THEN
2668	nz_do1d = nzt+1
2669	ELSE
2670	DO k = nzb+1, nzt+1
2671	nz_do1d = k
2672	IF ( zw(k) > z_max_do1d ) EXIT
2673	ENDDO
2674	ENDIF
2675
2676	!
2677	!-- Upper plot limit for 2D vertical sections
2678	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2679	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2680	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
2681	z_max_do2d, ' must be >= ', zu(nzb+1), &
2682	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
2683	CALL local_stop
2684	ENDIF
2685
2686	!
2687	!-- Upper plot limit for 3D arrays
2688	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2689
2690	!
2691	!-- Determine and check accuracy for compressed 3D plot output
2692	IF ( do3d_compress ) THEN
2693	!
2694	!-- Compression only permissible on T3E machines
2695	IF ( host(1:3) /= 't3e' ) THEN
2696	IF ( myid == 0 ) THEN
2697	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
2698	'ed on host "', TRIM( host ), '"'
2699	ENDIF
2700	CALL local_stop
2701	ENDIF
2702
2703	i = 1
2704	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2705
2706	ilen = LEN_TRIM( do3d_comp_prec(i) )
2707	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2708	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2709	IF ( myid == 0 ) THEN
2710	PRINT*, '+++ check_parameters: illegal precision: ', &
2711	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
2712	ENDIF
2713	CALL local_stop
2714	ENDIF
2715
2716	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2717	var = do3d_comp_prec(i)(1:ilen-1)
2718
2719	SELECT CASE ( var )
2720
2721	CASE ( 'u' )
2722	j = 1
2723	CASE ( 'v' )
2724	j = 2
2725	CASE ( 'w' )
2726	j = 3
2727	CASE ( 'p' )
2728	j = 4
2729	CASE ( 'pt' )
2730	j = 5
2731
2732	CASE DEFAULT
2733	IF ( myid == 0 ) THEN
2734	PRINT*, '+++ check_parameters: unknown variable in ', &
2735	'assignment'
2736	PRINT*, ' do3d_comp_prec(', i, ')="', &
2737	TRIM( do3d_comp_prec(i) ),'"'
2738	ENDIF
2739	CALL local_stop
2740
2741	END SELECT
2742
2743	plot_3d_precision(j)%precision = prec
2744	i = i + 1
2745
2746	ENDDO
2747	ENDIF
2748
2749	!
2750	!-- Check the data output format(s)
2751	IF ( data_output_format(1) == ' ' ) THEN
2752	!
2753	!-- Default value
2754	netcdf_output = .TRUE.
2755	ELSE
2756	i = 1
2757	DO WHILE ( data_output_format(i) /= ' ' )
2758
2759	SELECT CASE ( data_output_format(i) )
2760
2761	CASE ( 'netcdf' )
2762	netcdf_output = .TRUE.
2763	CASE ( 'iso2d' )
2764	iso2d_output = .TRUE.
2765	CASE ( 'profil' )
2766	profil_output = .TRUE.
2767	CASE ( 'avs' )
2768	avs_output = .TRUE.
2769
2770	CASE DEFAULT
2771	IF ( myid == 0 ) THEN
2772	PRINT*, '+++ check_parameters:'
2773	PRINT*, ' unknown value for data_output_format "', &
2774	TRIM( data_output_format(i) ),'"'
2775	ENDIF
2776	CALL local_stop
2777
2778	END SELECT
2779
2780	i = i + 1
2781	IF ( i > 10 ) EXIT
2782
2783	ENDDO
2784
2785	ENDIF
2786
2787	!
2788	!-- Check netcdf precison
2789	ldum = .FALSE.
2790	CALL define_netcdf_header( 'ch', ldum, 0 )
2791
2792	!
2793	!-- Check, whether a constant diffusion coefficient shall be used
2794	IF ( km_constant /= -1.0 ) THEN
2795	IF ( km_constant < 0.0 ) THEN
2796	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
2797	km_constant, ' < 0.0'
2798	CALL local_stop
2799	ELSE
2800	IF ( prandtl_number < 0.0 ) THEN
2801	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
2802	prandtl_number, ' < 0.0'
2803	CALL local_stop
2804	ENDIF
2805	constant_diffusion = .TRUE.
2806
2807	IF ( prandtl_layer ) THEN
2808	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
2809	'is not allowed with fixed value of km'
2810	CALL local_stop
2811	ENDIF
2812	ENDIF
2813	ENDIF
2814
2815	!
2816	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2817	!-- for the horizontal diffusivity used within the outflow damping layer,
2818	!-- and check/set the width of the damping layer
2819	IF ( bc_lr /= 'cyclic' ) THEN
2820	IF ( km_damp_max == -1.0 ) THEN
2821	km_damp_max = 0.5 * dx
2822	ENDIF
2823	IF ( outflow_damping_width == -1.0 ) THEN
2824	outflow_damping_width = MIN( 20, nx/2 )
2825	ENDIF
2826	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2827	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2828	'idth out of range'
2829	CALL local_stop
2830	ENDIF
2831	ENDIF
2832
2833	IF ( bc_ns /= 'cyclic' ) THEN
2834	IF ( km_damp_max == -1.0 ) THEN
2835	km_damp_max = 0.5 * dy
2836	ENDIF
2837	IF ( outflow_damping_width == -1.0 ) THEN
2838	outflow_damping_width = MIN( 20, ny/2 )
2839	ENDIF
2840	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2841	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
2842	'idth out of range'
2843	CALL local_stop
2844	ENDIF
2845	ENDIF
2846
2847	!
2848	!-- Check value range for rif
2849	IF ( rif_min >= rif_max ) THEN
2850	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
2851	' must be less than rif_max=', rif_max
2852	CALL local_stop
2853	ENDIF
2854
2855	!
2856	!-- Determine upper and lower hight level indices for random perturbations
2857	IF ( disturbance_level_b == -9999999.9 ) THEN
2858	IF ( ocean ) THEN
2859	disturbance_level_b = zu((nzt*2)/3)
2860	disturbance_level_ind_b = ( nzt * 2 ) / 3
2861	ELSE
2862	disturbance_level_b = zu(nzb+3)
2863	disturbance_level_ind_b = nzb + 3
2864	ENDIF
2865	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2866	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2867	disturbance_level_b, ' must be >= ',zu(3), &
2868	'(zu(3))'
2869	CALL local_stop
2870	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2871	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
2872	disturbance_level_b, ' must be <= ',zu(nzt-2),&
2873	'(zu(nzt-2))'
2874	CALL local_stop
2875	ELSE
2876	DO k = 3, nzt-2
2877	IF ( disturbance_level_b <= zu(k) ) THEN
2878	disturbance_level_ind_b = k
2879	EXIT
2880	ENDIF
2881	ENDDO
2882	ENDIF
2883
2884	IF ( disturbance_level_t == -9999999.9 ) THEN
2885	IF ( ocean ) THEN
2886	disturbance_level_t = zu(nzt-3)
2887	disturbance_level_ind_t = nzt - 3
2888	ELSE
2889	disturbance_level_t = zu(nzt/3)
2890	disturbance_level_ind_t = nzt / 3
2891	ENDIF
2892	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2893	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2894	disturbance_level_t, ' must be <= ',zu(nzt-2),&
2895	'(zu(nzt-2))'
2896	CALL local_stop
2897	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2898	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
2899	disturbance_level_t, ' must be >= ', &
2900	'disturbance_level_b=', disturbance_level_b
2901	CALL local_stop
2902	ELSE
2903	DO k = 3, nzt-2
2904	IF ( disturbance_level_t <= zu(k) ) THEN
2905	disturbance_level_ind_t = k
2906	EXIT
2907	ENDIF
2908	ENDDO
2909	ENDIF
2910
2911	!
2912	!-- Check again whether the levels determined this way are ok.
2913	!-- Error may occur at automatic determination and too few grid points in
2914	!-- z-direction.
2915	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2916	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
2917	'disturbance_level_ind_t=', &
2918	disturbance_level_ind_t, ' must be >= ', &
2919	'disturbance_level_ind_b=', &
2920	disturbance_level_ind_b
2921	CALL local_stop
2922	ENDIF
2923
2924	!
2925	!-- Determine the horizontal index range for random perturbations.
2926	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2927	!-- near the inflow and the perturbation area is further limited to ...(1)
2928	!-- after the initial phase of the flow.
2929	dist_nxl = 0; dist_nxr = nx
2930	dist_nys = 0; dist_nyn = ny
2931	IF ( bc_lr /= 'cyclic' ) THEN
2932	IF ( inflow_disturbance_begin == -1 ) THEN
2933	inflow_disturbance_begin = MIN( 10, nx/2 )
2934	ENDIF
2935	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2936	THEN
2937	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2938	'_begin out of range'
2939	CALL local_stop
2940	ENDIF
2941	IF ( inflow_disturbance_end == -1 ) THEN
2942	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2943	ENDIF
2944	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2945	THEN
2946	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2947	'_end out of range'
2948	CALL local_stop
2949	ENDIF
2950	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2951	IF ( inflow_disturbance_begin == -1 ) THEN
2952	inflow_disturbance_begin = MIN( 10, ny/2 )
2953	ENDIF
2954	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2955	THEN
2956	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2957	'_begin out of range'
2958	CALL local_stop
2959	ENDIF
2960	IF ( inflow_disturbance_end == -1 ) THEN
2961	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2962	ENDIF
2963	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2964	THEN
2965	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
2966	'_end out of range'
2967	CALL local_stop
2968	ENDIF
2969	ENDIF
2970
2971	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2972	dist_nxr = nx - inflow_disturbance_begin
2973	dist_nxl(1) = nx - inflow_disturbance_end
2974	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2975	dist_nxl = inflow_disturbance_begin
2976	dist_nxr(1) = inflow_disturbance_end
2977	ENDIF
2978	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2979	dist_nyn = ny - inflow_disturbance_begin
2980	dist_nys(1) = ny - inflow_disturbance_end
2981	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2982	dist_nys = inflow_disturbance_begin
2983	dist_nyn(1) = inflow_disturbance_end
2984	ENDIF
2985
2986	!
2987	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2988	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2989	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2990	IF ( myid == 0 ) THEN
2991	PRINT*, '+++ check_parameters:'
2992	PRINT*, ' turbulent_inflow = .T. requires a Dirichlet condition', &
2993	' at the inflow boundary'
2994	ENDIF
2995	CALL local_stop
2996	ENDIF
2997
2998	!
2999	!-- In case of turbulent inflow calculate the index of the recycling plane
3000	IF ( turbulent_inflow ) THEN
3001	IF ( recycling_width == 9999999.9 ) THEN
3002	!
3003	!-- Set the default value for the width of the recycling domain
3004	recycling_width = 0.1 * nx * dx
3005	ELSE
3006	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3007	IF ( myid == 0 ) THEN
3008	PRINT*, '+++ check_parameters:'
3009	PRINT*, ' illegal value for recycling_width: ', &
3010	recycling_width
3011	ENDIF
3012	CALL local_stop
3013	ENDIF
3014	ENDIF
3015	!
3016	!-- Calculate the index
3017	recycling_plane = recycling_width / dx
3018	ENDIF
3019
3020	!
3021	!-- Check random generator
3022	IF ( random_generator /= 'system-specific' .AND. &
3023	random_generator /= 'numerical-recipes' ) THEN
3024	IF ( myid == 0 ) THEN
3025	PRINT*, '+++ check_parameters:'
3026	PRINT*, ' unknown random generator: random_generator=', &
3027	random_generator
3028	ENDIF
3029	CALL local_stop
3030	ENDIF
3031
3032	!
3033	!-- Determine damping level index for 1D model
3034	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3035	IF ( damp_level_1d == -1.0 ) THEN
3036	damp_level_1d = zu(nzt+1)
3037	damp_level_ind_1d = nzt + 1
3038	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3039	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
3040	damp_level_1d, ' must be > 0.0 and < ', &
3041	'zu(nzt+1)', zu(nzt+1)
3042	CALL local_stop
3043	ELSE
3044	DO k = 1, nzt+1
3045	IF ( damp_level_1d <= zu(k) ) THEN
3046	damp_level_ind_1d = k
3047	EXIT
3048	ENDIF
3049	ENDDO
3050	ENDIF
3051	ENDIF
3052	!
3053	!-- Check some other 1d-model parameters
3054	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3055	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3056	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
3057	TRIM( mixing_length_1d ), '" is unknown'
3058	CALL local_stop
3059	ENDIF
3060	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3061	TRIM( dissipation_1d ) /= 'detering' ) THEN
3062	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
3063	TRIM( dissipation_1d ), '" is unknown'
3064	CALL local_stop
3065	ENDIF
3066
3067	!
3068	!-- Set time for the next user defined restart (time_restart is the
3069	!-- internal parameter for steering restart events)
3070	IF ( restart_time /= 9999999.9 ) THEN
3071	IF ( restart_time > simulated_time ) time_restart = restart_time
3072	ELSE
3073	!
3074	!-- In case of a restart run, set internal parameter to default (no restart)
3075	!-- if the NAMELIST-parameter restart_time is omitted
3076	time_restart = 9999999.9
3077	ENDIF
3078
3079	!
3080	!-- Set default value of the time needed to terminate a model run
3081	IF ( termination_time_needed == -1.0 ) THEN
3082	IF ( host(1:3) == 'ibm' ) THEN
3083	termination_time_needed = 300.0
3084	ELSE
3085	termination_time_needed = 35.0
3086	ENDIF
3087	ENDIF
3088
3089	!
3090	!-- Check the time needed to terminate a model run
3091	IF ( host(1:3) == 't3e' ) THEN
3092	!
3093	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3094	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3095	IF ( termination_time_needed <= 30.0 ) THEN
3096	IF ( myid == 0 ) THEN
3097	PRINT*, '+++ check_parameters: termination_time_needed', &
3098	termination_time_needed
3099	PRINT*, ' must be > 30.0 on host "', host, &
3100	'"'
3101	ENDIF
3102	CALL local_stop
3103	ENDIF
3104	ELSEIF ( host(1:3) == 'ibm' ) THEN
3105	!
3106	!-- On IBM-regatta machines the time should be at least 300 seconds,
3107	!-- because the job time consumed before executing palm (for compiling,
3108	!-- copying of files, etc.) has to be regarded
3109	IF ( termination_time_needed < 300.0 ) THEN
3110	IF ( myid == 0 ) THEN
3111	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
3112	'needed', termination_time_needed
3113	PRINT*, ' should be >= 300.0', &
3114	' on host "', host, '"'
3115	ENDIF
3116	ENDIF
3117	ENDIF
3118
3119
3120	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |