Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1394

Last change on this file since 1394 was 1385, checked in by raasch, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 147.2 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2014 Leibniz Universitaet Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1385 2014-05-02 14:39:33Z keck $
27	!
28	! 1384 2014-05-02 14:31:06Z raasch
29	! location messages added
30	!
31	! 1365 2014-04-22 15:03:56Z boeske
32	! Usage of large scale forcing for pt and q enabled:
33	! output for profiles of large scale advection (td_lsa_lpt, td_lsa_q),
34	! large scale subsidence (td_sub_lpt, td_sub_q)
35	! and nudging tendencies (td_nud_lpt, td_nud_q, td_nud_u and td_nud_v) added,
36	! check if use_subsidence_tendencies is used correctly
37	!
38	! 1361 2014-04-16 15:17:48Z hoffmann
39	! PA0363 removed
40	! PA0362 changed
41	!
42	! 1359 2014-04-11 17:15:14Z hoffmann
43	! Do not allow the execution of PALM with use_particle_tails, since particle
44	! tails are currently not supported by our new particle structure.
45	!
46	! PA0084 not necessary for new particle structure
47	!
48	! 1353 2014-04-08 15:21:23Z heinze
49	! REAL constants provided with KIND-attribute
50	!
51	! 1330 2014-03-24 17:29:32Z suehring
52	! In case of SGS-particle velocity advection of TKE is also allowed with
53	! dissipative 5th-order scheme.
54	!
55	! 1327 2014-03-21 11:00:16Z raasch
56	! "baroclinicity" renamed "baroclinity", "ocean version" replaced by "ocean mode"
57	! bugfix: duplicate error message 56 removed,
58	! check of data_output_format and do3d_compress removed
59	!
60	! 1322 2014-03-20 16:38:49Z raasch
61	! some REAL constants defined as wp-kind
62	!
63	! 1320 2014-03-20 08:40:49Z raasch
64	! Kind-parameters added to all INTEGER and REAL declaration statements,
65	! kinds are defined in new module kinds,
66	! revision history before 2012 removed,
67	! comment fields (!:) to be used for variable explanations added to
68	! all variable declaration statements
69	!
70	! 1308 2014-03-13 14:58:42Z fricke
71	! +netcdf_data_format_save
72	! Calculate fixed number of output time levels for parallel netcdf output.
73	! For masked data, parallel netcdf output is not tested so far, hence
74	! netcdf_data_format is switched back to non-paralell output.
75	!
76	! 1299 2014-03-06 13:15:21Z heinze
77	! enable usage of large_scale subsidence in combination with large_scale_forcing
78	! output for profile of large scale vertical velocity w_subs added
79	!
80	! 1276 2014-01-15 13:40:41Z heinze
81	! Use LSF_DATA also in case of Dirichlet bottom boundary condition for scalars
82	!
83	! 1241 2013-10-30 11:36:58Z heinze
84	! output for profiles of ug and vg added
85	! set surface_heatflux and surface_waterflux also in dependence on
86	! large_scale_forcing
87	! checks for nudging and large scale forcing from external file
88	!
89	! 1236 2013-09-27 07:21:13Z raasch
90	! check number of spectra levels
91	!
92	! 1216 2013-08-26 09:31:42Z raasch
93	! check for transpose_compute_overlap (temporary)
94	!
95	! 1214 2013-08-21 12:29:17Z kanani
96	! additional check for simultaneous use of vertical grid stretching
97	! and particle advection
98	!
99	! 1212 2013-08-15 08:46:27Z raasch
100	! checks for poisfft_hybrid removed
101	!
102	! 1210 2013-08-14 10:58:20Z raasch
103	! check for fftw
104	!
105	! 1179 2013-06-14 05:57:58Z raasch
106	! checks and settings of buoyancy parameters and switches revised,
107	! initial profile for rho added to hom (id=77)
108	!
109	! 1174 2013-05-31 10:28:08Z gryschka
110	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
111	!
112	! 1159 2013-05-21 11:58:22Z fricke
113	! bc_lr/ns_dirneu/neudir removed
114	!
115	! 1115 2013-03-26 18:16:16Z hoffmann
116	! unused variables removed
117	! drizzle can be used without precipitation
118	!
119	! 1111 2013-03-08 23:54:10Z raasch
120	! ibc_p_b = 2 removed
121	!
122	! 1103 2013-02-20 02:15:53Z raasch
123	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
124	!
125	! 1092 2013-02-02 11:24:22Z raasch
126	! unused variables removed
127	!
128	! 1069 2012-11-28 16:18:43Z maronga
129	! allow usage of topography in combination with cloud physics
130	!
131	! 1065 2012-11-22 17:42:36Z hoffmann
132	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
133	! precipitation in order to save computational resources.
134	!
135	! 1060 2012-11-21 07:19:51Z raasch
136	! additional check for parameter turbulent_inflow
137	!
138	! 1053 2012-11-13 17:11:03Z hoffmann
139	! necessary changes for the new two-moment cloud physics scheme added:
140	! - check cloud physics scheme (Kessler or Seifert and Beheng)
141	! - plant_canopy is not allowed
142	! - currently, only cache loop_optimization is allowed
143	! - initial profiles of nr, qr
144	! - boundary condition of nr, qr
145	! - check output quantities (qr, nr, prr)
146	!
147	! 1036 2012-10-22 13:43:42Z raasch
148	! code put under GPL (PALM 3.9)
149	!
150	! 1031/1034 2012-10-22 11:32:49Z raasch
151	! check of netcdf4 parallel file support
152	!
153	! 1019 2012-09-28 06:46:45Z raasch
154	! non-optimized version of prognostic_equations not allowed any more
155	!
156	! 1015 2012-09-27 09:23:24Z raasch
157	! acc allowed for loop optimization,
158	! checks for adjustment of mixing length to the Prandtl mixing length removed
159	!
160	! 1003 2012-09-14 14:35:53Z raasch
161	! checks for cases with unequal subdomain sizes removed
162	!
163	! 1001 2012-09-13 14:08:46Z raasch
164	! all actions concerning leapfrog- and upstream-spline-scheme removed
165	!
166	! 996 2012-09-07 10:41:47Z raasch
167	! little reformatting
168
169	! 978 2012-08-09 08:28:32Z fricke
170	! setting of bc_lr/ns_dirneu/neudir
171	! outflow damping layer removed
172	! check for z0h*
173	! check for pt_damping_width
174	!
175	! 964 2012-07-26 09:14:24Z raasch
176	! check of old profil-parameters removed
177	!
178	! 940 2012-07-09 14:31:00Z raasch
179	! checks for parameter neutral
180	!
181	! 924 2012-06-06 07:44:41Z maronga
182	! Bugfix: preprocessor directives caused error during compilation
183	!
184	! 892 2012-05-02 13:51:44Z maronga
185	! Bugfix for parameter file check ( excluding __netcdf4 )
186	!
187	! 866 2012-03-28 06:44:41Z raasch
188	! use only 60% of the geostrophic wind as translation speed in case of Galilean
189	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
190	! timestep
191	!
192	! 861 2012-03-26 14:18:34Z suehring
193	! Check for topography and ws-scheme removed.
194	! Check for loop_optimization = 'vector' and ws-scheme removed.
195	!
196	! 845 2012-03-07 10:23:05Z maronga
197	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
198	!
199	! 828 2012-02-21 12:00:36Z raasch
200	! check of collision_kernel extended
201	!
202	! 825 2012-02-19 03:03:44Z raasch
203	! check for collision_kernel and curvature_solution_effects
204	!
205	! 809 2012-01-30 13:32:58Z maronga
206	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
207	!
208	! 807 2012-01-25 11:53:51Z maronga
209	! New cpp directive "__check" implemented which is used by check_namelist_files
210	!
211	! Revision 1.1 1997/08/26 06:29:23 raasch
212	! Initial revision
213	!
214	!
215	! Description:
216	! ------------
217	! Check control parameters and deduce further quantities.
218	!------------------------------------------------------------------------------!
219
220	USE arrays_3d
221	USE cloud_parameters
222	USE constants
223	USE control_parameters
224	USE dvrp_variables
225	USE grid_variables
226	USE indices
227	USE kinds
228	USE model_1d
229	USE netcdf_control
230	USE particle_attributes
231	USE pegrid
232	USE profil_parameter
233	USE spectrum
234	USE statistics
235	USE subsidence_mod
236	USE statistics
237	USE transpose_indices
238
239	IMPLICIT NONE
240
241	CHARACTER (LEN=1) :: sq !:
242	CHARACTER (LEN=6) :: var !:
243	CHARACTER (LEN=7) :: unit !:
244	CHARACTER (LEN=8) :: date !:
245	CHARACTER (LEN=10) :: time !:
246	CHARACTER (LEN=40) :: coupling_string !:
247	CHARACTER (LEN=100) :: action !:
248
249	INTEGER(iwp) :: i !:
250	INTEGER(iwp) :: ilen !:
251	INTEGER(iwp) :: iremote = 0 !:
252	INTEGER(iwp) :: j !:
253	INTEGER(iwp) :: k !:
254	INTEGER(iwp) :: kk !:
255	INTEGER(iwp) :: netcdf_data_format_save !:
256	INTEGER(iwp) :: position !:
257	INTEGER(iwp) :: prec !:
258
259	LOGICAL :: found !:
260	LOGICAL :: ldum !:
261
262	REAL(wp) :: gradient !:
263	REAL(wp) :: remote = 0.0_wp !:
264	REAL(wp) :: simulation_time_since_reference !:
265
266
267	CALL location_message( 'checking parameters' )
268
269	!
270	!-- Check for overlap combinations, which are not realized yet
271	IF ( transpose_compute_overlap ) THEN
272	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
273	#if defined( __openacc )
274	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
275	#endif
276	ENDIF
277
278	!
279	!-- Warning, if host is not set
280	IF ( host(1:1) == ' ' ) THEN
281	message_string = '"host" is not set. Please check that environment ' // &
282	'variable "localhost" & is set before running PALM'
283	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
284	ENDIF
285
286	!
287	!-- Check the coupling mode
288	IF ( coupling_mode /= 'uncoupled' .AND. &
289	coupling_mode /= 'atmosphere_to_ocean' .AND. &
290	coupling_mode /= 'ocean_to_atmosphere' ) THEN
291	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
292	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
293	ENDIF
294
295	!
296	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
297	IF ( coupling_mode /= 'uncoupled') THEN
298
299	IF ( dt_coupling == 9999999.9_wp ) THEN
300	message_string = 'dt_coupling is not set but required for coup' // &
301	'ling mode "' // TRIM( coupling_mode ) // '"'
302	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
303	ENDIF
304
305	#if defined( __parallel )
306
307	!
308	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
309	!-- program.
310	!-- check_namelist_files will need the following information of the other
311	!-- model (atmosphere/ocean).
312	! dt_coupling = remote
313	! dt_max = remote
314	! restart_time = remote
315	! dt_restart= remote
316	! simulation_time_since_reference = remote
317	! dx = remote
318
319
320	#if ! defined( __check )
321	IF ( myid == 0 ) THEN
322	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
323	ierr )
324	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
325	status, ierr )
326	ENDIF
327	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
328	#endif
329	IF ( dt_coupling /= remote ) THEN
330	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
331	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
332	'dt_coupling_remote = ', remote
333	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
334	ENDIF
335	IF ( dt_coupling <= 0.0_wp ) THEN
336	#if ! defined( __check )
337	IF ( myid == 0 ) THEN
338	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
339	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
340	status, ierr )
341	ENDIF
342	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
343	#endif
344	dt_coupling = MAX( dt_max, remote )
345	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
346	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
347	'MAX(dt_max(A,O)) = ', dt_coupling
348	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
349	ENDIF
350	#if ! defined( __check )
351	IF ( myid == 0 ) THEN
352	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
353	ierr )
354	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
355	status, ierr )
356	ENDIF
357	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
358	#endif
359	IF ( restart_time /= remote ) THEN
360	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
361	'": restart_time = ', restart_time, '& is not equal to ', &
362	'restart_time_remote = ', remote
363	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
364	ENDIF
365	#if ! defined( __check )
366	IF ( myid == 0 ) THEN
367	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
368	ierr )
369	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
370	status, ierr )
371	ENDIF
372	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
373	#endif
374	IF ( dt_restart /= remote ) THEN
375	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
376	'": dt_restart = ', dt_restart, '& is not equal to ', &
377	'dt_restart_remote = ', remote
378	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
379	ENDIF
380
381	simulation_time_since_reference = end_time - coupling_start_time
382	#if ! defined( __check )
383	IF ( myid == 0 ) THEN
384	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
385	14, comm_inter, ierr )
386	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
387	status, ierr )
388	ENDIF
389	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
390	#endif
391	IF ( simulation_time_since_reference /= remote ) THEN
392	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
393	'": simulation_time_since_reference = ', &
394	simulation_time_since_reference, '& is not equal to ', &
395	'simulation_time_since_reference_remote = ', remote
396	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
397	ENDIF
398
399	#if ! defined( __check )
400	IF ( myid == 0 ) THEN
401	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
402	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
403	status, ierr )
404	ENDIF
405	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
406
407	#endif
408	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
409
410	IF ( dx < remote ) THEN
411	WRITE( message_string, * ) 'coupling mode "', &
412	TRIM( coupling_mode ), &
413	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
414	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
415	ENDIF
416
417	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
418	WRITE( message_string, * ) 'coupling mode "', &
419	TRIM( coupling_mode ), &
420	'": Domain size in x-direction is not equal in ocean and atmosphere'
421	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
422	ENDIF
423
424	ENDIF
425
426	#if ! defined( __check )
427	IF ( myid == 0) THEN
428	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
429	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
430	status, ierr )
431	ENDIF
432	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
433	#endif
434	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
435
436	IF ( dy < remote ) THEN
437	WRITE( message_string, * ) 'coupling mode "', &
438	TRIM( coupling_mode ), &
439	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
440	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
441	ENDIF
442
443	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
444	WRITE( message_string, * ) 'coupling mode "', &
445	TRIM( coupling_mode ), &
446	'": Domain size in y-direction is not equal in ocean and atmosphere'
447	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
448	ENDIF
449
450	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
451	WRITE( message_string, * ) 'coupling mode "', &
452	TRIM( coupling_mode ), &
453	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
454	' atmosphere'
455	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
456	ENDIF
457
458	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
459	WRITE( message_string, * ) 'coupling mode "', &
460	TRIM( coupling_mode ), &
461	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
462	' atmosphere'
463	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
464	ENDIF
465
466	ENDIF
467	#else
468	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
469	' ''mrun -K parallel'''
470	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
471	#endif
472	ENDIF
473
474	#if defined( __parallel ) && ! defined ( __check )
475	!
476	!-- Exchange via intercommunicator
477	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
478	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
479	ierr )
480	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
481	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
482	comm_inter, status, ierr )
483	ENDIF
484	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
485
486	#endif
487
488
489	!
490	!-- Generate the file header which is used as a header for most of PALM's
491	!-- output files
492	CALL DATE_AND_TIME( date, time )
493	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
494	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
495	IF ( coupling_mode == 'uncoupled' ) THEN
496	coupling_string = ''
497	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
498	coupling_string = ' coupled (atmosphere)'
499	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
500	coupling_string = ' coupled (ocean)'
501	ENDIF
502
503	WRITE ( run_description_header, &
504	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
505	TRIM( version ), TRIM( revision ), 'run: ', &
506	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
507	'host: ', TRIM( host ), run_date, run_time
508
509	!
510	!-- Check the general loop optimization method
511	IF ( loop_optimization == 'default' ) THEN
512	IF ( host(1:3) == 'nec' ) THEN
513	loop_optimization = 'vector'
514	ELSE
515	loop_optimization = 'cache'
516	ENDIF
517	ENDIF
518
519	SELECT CASE ( TRIM( loop_optimization ) )
520
521	CASE ( 'acc', 'cache', 'vector' )
522	CONTINUE
523
524	CASE DEFAULT
525	message_string = 'illegal value given for loop_optimization: "' // &
526	TRIM( loop_optimization ) // '"'
527	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
528
529	END SELECT
530
531	!
532	!-- Check if vertical grid stretching is used together with particles
533	IF ( dz_stretch_level < 100000.0_wp .AND. particle_advection ) THEN
534	message_string = 'Vertical grid stretching is not allowed together ' // &
535	'with particle advection.'
536	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
537	ENDIF
538
539	!
540	!--
541	IF ( use_particle_tails ) THEN
542	message_string = 'Particle tails are currently not available due ' // &
543	'to the new particle structure.'
544	CALL message( 'check_parameters', 'PA0392', 1, 2, 0, 6, 0 )
545	ENDIF
546
547	!
548	!-- Check topography setting (check for illegal parameter combinations)
549	IF ( topography /= 'flat' ) THEN
550	action = ' '
551	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
552	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
553	ENDIF
554	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
555	THEN
556	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
557	ENDIF
558	IF ( psolver == 'sor' ) THEN
559	WRITE( action, '(A,A)' ) 'psolver = ', psolver
560	ENDIF
561	IF ( sloping_surface ) THEN
562	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
563	ENDIF
564	IF ( galilei_transformation ) THEN
565	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
566	ENDIF
567	IF ( cloud_physics ) THEN
568	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
569	ENDIF
570	IF ( cloud_droplets ) THEN
571	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
572	ENDIF
573	IF ( .NOT. prandtl_layer ) THEN
574	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
575	ENDIF
576	IF ( action /= ' ' ) THEN
577	message_string = 'a non-flat topography does not allow ' // &
578	TRIM( action )
579	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
580	ENDIF
581	!
582	!-- In case of non-flat topography, check whether the convention how to
583	!-- define the topography grid has been set correctly, or whether the default
584	!-- is applicable. If this is not possible, abort.
585	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
586	IF ( TRIM( topography ) /= 'single_building' .AND. &
587	TRIM( topography ) /= 'single_street_canyon' .AND. &
588	TRIM( topography ) /= 'read_from_file' ) THEN
589	!-- The default value is not applicable here, because it is only valid
590	!-- for the two standard cases 'single_building' and 'read_from_file'
591	!-- defined in init_grid.
592	WRITE( message_string, * ) &
593	'The value for "topography_grid_convention" ', &
594	'is not set. Its default value is & only valid for ', &
595	'"topography" = ''single_building'', ', &
596	'''single_street_canyon'' & or ''read_from_file''.', &
597	' & Choose ''cell_edge'' or ''cell_center''.'
598	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
599	ELSE
600	!-- The default value is applicable here.
601	!-- Set convention according to topography.
602	IF ( TRIM( topography ) == 'single_building' .OR. &
603	TRIM( topography ) == 'single_street_canyon' ) THEN
604	topography_grid_convention = 'cell_edge'
605	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
606	topography_grid_convention = 'cell_center'
607	ENDIF
608	ENDIF
609	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
610	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
611	WRITE( message_string, * ) &
612	'The value for "topography_grid_convention" is ', &
613	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
614	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
615	ENDIF
616
617	ENDIF
618
619	!
620	!-- Check ocean setting
621	IF ( ocean ) THEN
622
623	action = ' '
624	IF ( action /= ' ' ) THEN
625	message_string = 'ocean = .T. does not allow ' // TRIM( action )
626	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
627	ENDIF
628
629	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
630	TRIM( coupling_char ) == '_O' ) THEN
631
632	!
633	!-- Check whether an (uncoupled) atmospheric run has been declared as an
634	!-- ocean run (this setting is done via mrun-option -y)
635
636	message_string = 'ocean = .F. does not allow coupling_char = "' // &
637	TRIM( coupling_char ) // '" set by mrun-option "-y"'
638	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
639
640	ENDIF
641	!
642	!-- Check cloud scheme
643	IF ( cloud_scheme == 'seifert_beheng' ) THEN
644	icloud_scheme = 0
645	ELSEIF ( cloud_scheme == 'kessler' ) THEN
646	icloud_scheme = 1
647	ELSE
648	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
649	TRIM( cloud_scheme ) // '"'
650	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
651	ENDIF
652	!
653	!-- Check whether there are any illegal values
654	!-- Pressure solver:
655	IF ( psolver /= 'poisfft' .AND. &
656	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
657	message_string = 'unknown solver for perturbation pressure: psolver' // &
658	' = "' // TRIM( psolver ) // '"'
659	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
660	ENDIF
661
662	IF ( psolver == 'multigrid' ) THEN
663	IF ( cycle_mg == 'w' ) THEN
664	gamma_mg = 2
665	ELSEIF ( cycle_mg == 'v' ) THEN
666	gamma_mg = 1
667	ELSE
668	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
669	TRIM( cycle_mg ) // '"'
670	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
671	ENDIF
672	ENDIF
673
674	IF ( fft_method /= 'singleton-algorithm' .AND. &
675	fft_method /= 'temperton-algorithm' .AND. &
676	fft_method /= 'fftw' .AND. &
677	fft_method /= 'system-specific' ) THEN
678	message_string = 'unknown fft-algorithm: fft_method = "' // &
679	TRIM( fft_method ) // '"'
680	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
681	ENDIF
682
683	IF( momentum_advec == 'ws-scheme' .AND. &
684	.NOT. call_psolver_at_all_substeps ) THEN
685	message_string = 'psolver must be called at each RK3 substep when "'//&
686	TRIM(momentum_advec) // ' "is used for momentum_advec'
687	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
688	END IF
689	!
690	!-- Advection schemes:
691	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
692	THEN
693	message_string = 'unknown advection scheme: momentum_advec = "' // &
694	TRIM( momentum_advec ) // '"'
695	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
696	ENDIF
697	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
698	.AND. ( timestep_scheme == 'euler' .OR. &
699	timestep_scheme == 'runge-kutta-2' ) ) &
700	THEN
701	message_string = 'momentum_advec or scalar_advec = "' &
702	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
703	TRIM( timestep_scheme ) // '"'
704	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
705	ENDIF
706	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
707	scalar_advec /= 'bc-scheme' ) &
708	THEN
709	message_string = 'unknown advection scheme: scalar_advec = "' // &
710	TRIM( scalar_advec ) // '"'
711	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
712	ENDIF
713	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
714	THEN
715	message_string = 'advection_scheme scalar_advec = "' &
716	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
717	TRIM( loop_optimization ) // '"'
718	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
719	ENDIF
720
721	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke .AND. &
722	scalar_advec /= 'ws-scheme' ) THEN
723	use_upstream_for_tke = .TRUE.
724	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
725	'use_sgs_for_particles = .TRUE. ' // &
726	'and scalar_advec /= ws-scheme'
727	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
728	ENDIF
729
730	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
731	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
732	'curvature_solution_effects = .TRUE.'
733	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
734	ENDIF
735
736	!
737	!-- Set LOGICAL switches to enhance performance
738	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
739	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
740
741	!
742	!-- Timestep schemes:
743	SELECT CASE ( TRIM( timestep_scheme ) )
744
745	CASE ( 'euler' )
746	intermediate_timestep_count_max = 1
747
748	CASE ( 'runge-kutta-2' )
749	intermediate_timestep_count_max = 2
750
751	CASE ( 'runge-kutta-3' )
752	intermediate_timestep_count_max = 3
753
754	CASE DEFAULT
755	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
756	TRIM( timestep_scheme ) // '"'
757	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
758
759	END SELECT
760
761	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
762	.AND. timestep_scheme(1:5) == 'runge' ) THEN
763	message_string = 'momentum advection scheme "' // &
764	TRIM( momentum_advec ) // '" & does not work with ' // &
765	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
766	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
767	ENDIF
768
769	!
770	!-- Collision kernels:
771	SELECT CASE ( TRIM( collision_kernel ) )
772
773	CASE ( 'hall', 'hall_fast' )
774	hall_kernel = .TRUE.
775
776	CASE ( 'palm' )
777	palm_kernel = .TRUE.
778
779	CASE ( 'wang', 'wang_fast' )
780	wang_kernel = .TRUE.
781
782	CASE ( 'none' )
783
784
785	CASE DEFAULT
786	message_string = 'unknown collision kernel: collision_kernel = "' // &
787	TRIM( collision_kernel ) // '"'
788	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
789
790	END SELECT
791	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
792
793	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
794	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
795	!
796	!-- No restart run: several initialising actions are possible
797	action = initializing_actions
798	DO WHILE ( TRIM( action ) /= '' )
799	position = INDEX( action, ' ' )
800	SELECT CASE ( action(1:position-1) )
801
802	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
803	'by_user', 'initialize_vortex', 'initialize_ptanom' )
804	action = action(position+1:)
805
806	CASE DEFAULT
807	message_string = 'initializing_action = "' // &
808	TRIM( action ) // '" unkown or not allowed'
809	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
810
811	END SELECT
812	ENDDO
813	ENDIF
814
815	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
816	conserve_volume_flow ) THEN
817	message_string = 'initializing_actions = "initialize_vortex"' // &
818	' ist not allowed with conserve_volume_flow = .T.'
819	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
820	ENDIF
821
822
823	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
824	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
825	message_string = 'initializing_actions = "set_constant_profiles"' // &
826	' and "set_1d-model_profiles" are not allowed ' // &
827	'simultaneously'
828	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
829	ENDIF
830
831	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
832	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
833	message_string = 'initializing_actions = "set_constant_profiles"' // &
834	' and "by_user" are not allowed simultaneously'
835	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
836	ENDIF
837
838	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
839	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
840	message_string = 'initializing_actions = "by_user" and ' // &
841	'"set_1d-model_profiles" are not allowed simultaneously'
842	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
843	ENDIF
844
845	IF ( cloud_physics .AND. .NOT. humidity ) THEN
846	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
847	'not allowed with humidity = ', humidity
848	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
849	ENDIF
850
851	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
852	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
853	'not allowed with cloud_physics = ', cloud_physics
854	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
855	ENDIF
856
857	IF ( humidity .AND. sloping_surface ) THEN
858	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
859	'are not allowed simultaneously'
860	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
861	ENDIF
862
863	IF ( passive_scalar .AND. humidity ) THEN
864	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
865	'is not allowed simultaneously'
866	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
867	ENDIF
868
869	IF ( plant_canopy .AND. ( drag_coefficient == 0.0_wp ) ) THEN
870	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
871	'coefficient & given value is drag_coefficient = 0.0'
872	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
873	ENDIF
874
875	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
876	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
877	' seifert_beheng'
878	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
879	ENDIF
880
881	IF ( .NOT. ( loop_optimization == 'cache' .OR. &
882	loop_optimization == 'vector' ) &
883	.AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
884	message_string = 'cloud_scheme = seifert_beheng requires ' // &
885	'loop_optimization = "cache" or "vector"'
886	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
887	ENDIF
888
889	!
890	!-- In case of no model continuation run, check initialising parameters and
891	!-- deduce further quantities
892	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
893
894	!
895	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
896	pt_init = pt_surface
897	IF ( humidity ) THEN
898	q_init = q_surface
899	ENDIF
900	IF ( ocean ) sa_init = sa_surface
901	IF ( passive_scalar ) q_init = s_surface
902	IF ( plant_canopy ) lad = 0.0_wp
903
904	!
905	!--
906	!-- If required, compute initial profile of the geostrophic wind
907	!-- (component ug)
908	i = 1
909	gradient = 0.0_wp
910
911	IF ( .NOT. ocean ) THEN
912
913	ug_vertical_gradient_level_ind(1) = 0
914	ug(0) = ug_surface
915	DO k = 1, nzt+1
916	IF ( i < 11 ) THEN
917	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
918	ug_vertical_gradient_level(i) >= 0.0_wp ) THEN
919	gradient = ug_vertical_gradient(i) / 100.0_wp
920	ug_vertical_gradient_level_ind(i) = k - 1
921	i = i + 1
922	ENDIF
923	ENDIF
924	IF ( gradient /= 0.0_wp ) THEN
925	IF ( k /= 1 ) THEN
926	ug(k) = ug(k-1) + dzu(k) * gradient
927	ELSE
928	ug(k) = ug_surface + dzu(k) * gradient
929	ENDIF
930	ELSE
931	ug(k) = ug(k-1)
932	ENDIF
933	ENDDO
934
935	ELSE
936
937	ug_vertical_gradient_level_ind(1) = nzt+1
938	ug(nzt+1) = ug_surface
939	DO k = nzt, nzb, -1
940	IF ( i < 11 ) THEN
941	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
942	ug_vertical_gradient_level(i) <= 0.0_wp ) THEN
943	gradient = ug_vertical_gradient(i) / 100.0_wp
944	ug_vertical_gradient_level_ind(i) = k + 1
945	i = i + 1
946	ENDIF
947	ENDIF
948	IF ( gradient /= 0.0_wp ) THEN
949	IF ( k /= nzt ) THEN
950	ug(k) = ug(k+1) - dzu(k+1) * gradient
951	ELSE
952	ug(k) = ug_surface - 0.5_wp * dzu(k+1) * gradient
953	ug(k+1) = ug_surface + 0.5_wp * dzu(k+1) * gradient
954	ENDIF
955	ELSE
956	ug(k) = ug(k+1)
957	ENDIF
958	ENDDO
959
960	ENDIF
961
962	!
963	!-- In case of no given gradients for ug, choose a zero gradient
964	IF ( ug_vertical_gradient_level(1) == -9999999.9_wp ) THEN
965	ug_vertical_gradient_level(1) = 0.0_wp
966	ENDIF
967
968	!
969	!--
970	!-- If required, compute initial profile of the geostrophic wind
971	!-- (component vg)
972	i = 1
973	gradient = 0.0_wp
974
975	IF ( .NOT. ocean ) THEN
976
977	vg_vertical_gradient_level_ind(1) = 0
978	vg(0) = vg_surface
979	DO k = 1, nzt+1
980	IF ( i < 11 ) THEN
981	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
982	vg_vertical_gradient_level(i) >= 0.0_wp ) THEN
983	gradient = vg_vertical_gradient(i) / 100.0_wp
984	vg_vertical_gradient_level_ind(i) = k - 1
985	i = i + 1
986	ENDIF
987	ENDIF
988	IF ( gradient /= 0.0_wp ) THEN
989	IF ( k /= 1 ) THEN
990	vg(k) = vg(k-1) + dzu(k) * gradient
991	ELSE
992	vg(k) = vg_surface + dzu(k) * gradient
993	ENDIF
994	ELSE
995	vg(k) = vg(k-1)
996	ENDIF
997	ENDDO
998
999	ELSE
1000
1001	vg_vertical_gradient_level_ind(1) = nzt+1
1002	vg(nzt+1) = vg_surface
1003	DO k = nzt, nzb, -1
1004	IF ( i < 11 ) THEN
1005	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1006	vg_vertical_gradient_level(i) <= 0.0_wp ) THEN
1007	gradient = vg_vertical_gradient(i) / 100.0_wp
1008	vg_vertical_gradient_level_ind(i) = k + 1
1009	i = i + 1
1010	ENDIF
1011	ENDIF
1012	IF ( gradient /= 0.0_wp ) THEN
1013	IF ( k /= nzt ) THEN
1014	vg(k) = vg(k+1) - dzu(k+1) * gradient
1015	ELSE
1016	vg(k) = vg_surface - 0.5_wp * dzu(k+1) * gradient
1017	vg(k+1) = vg_surface + 0.5_wp * dzu(k+1) * gradient
1018	ENDIF
1019	ELSE
1020	vg(k) = vg(k+1)
1021	ENDIF
1022	ENDDO
1023
1024	ENDIF
1025
1026	!
1027	!-- In case of no given gradients for vg, choose a zero gradient
1028	IF ( vg_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1029	vg_vertical_gradient_level(1) = 0.0_wp
1030	ENDIF
1031
1032	!
1033	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1034	!-- interpolate them from wind profile data (if given)
1035	IF ( u_profile(1) == 9999999.9_wp .AND. v_profile(1) == 9999999.9_wp ) THEN
1036
1037	u_init = ug
1038	v_init = vg
1039
1040	ELSEIF ( u_profile(1) == 0.0_wp .AND. v_profile(1) == 0.0_wp ) THEN
1041
1042	IF ( uv_heights(1) /= 0.0_wp ) THEN
1043	message_string = 'uv_heights(1) must be 0.0'
1044	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1045	ENDIF
1046
1047	use_prescribed_profile_data = .TRUE.
1048
1049	kk = 1
1050	u_init(0) = 0.0_wp
1051	v_init(0) = 0.0_wp
1052
1053	DO k = 1, nz+1
1054
1055	IF ( kk < 100 ) THEN
1056	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1057	kk = kk + 1
1058	IF ( kk == 100 ) EXIT
1059	ENDDO
1060	ENDIF
1061
1062	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9_wp ) THEN
1063	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1064	( uv_heights(kk+1) - uv_heights(kk) ) * &
1065	( u_profile(kk+1) - u_profile(kk) )
1066	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1067	( uv_heights(kk+1) - uv_heights(kk) ) * &
1068	( v_profile(kk+1) - v_profile(kk) )
1069	ELSE
1070	u_init(k) = u_profile(kk)
1071	v_init(k) = v_profile(kk)
1072	ENDIF
1073
1074	ENDDO
1075
1076	ELSE
1077
1078	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1079	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1080
1081	ENDIF
1082
1083	!
1084	!-- Compute initial temperature profile using the given temperature gradients
1085	IF ( .NOT. neutral ) THEN
1086
1087	i = 1
1088	gradient = 0.0_wp
1089
1090	IF ( .NOT. ocean ) THEN
1091
1092	pt_vertical_gradient_level_ind(1) = 0
1093	DO k = 1, nzt+1
1094	IF ( i < 11 ) THEN
1095	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1096	pt_vertical_gradient_level(i) >= 0.0_wp ) THEN
1097	gradient = pt_vertical_gradient(i) / 100.0_wp
1098	pt_vertical_gradient_level_ind(i) = k - 1
1099	i = i + 1
1100	ENDIF
1101	ENDIF
1102	IF ( gradient /= 0.0_wp ) THEN
1103	IF ( k /= 1 ) THEN
1104	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1105	ELSE
1106	pt_init(k) = pt_surface + dzu(k) * gradient
1107	ENDIF
1108	ELSE
1109	pt_init(k) = pt_init(k-1)
1110	ENDIF
1111	ENDDO
1112
1113	ELSE
1114
1115	pt_vertical_gradient_level_ind(1) = nzt+1
1116	DO k = nzt, 0, -1
1117	IF ( i < 11 ) THEN
1118	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1119	pt_vertical_gradient_level(i) <= 0.0_wp ) THEN
1120	gradient = pt_vertical_gradient(i) / 100.0_wp
1121	pt_vertical_gradient_level_ind(i) = k + 1
1122	i = i + 1
1123	ENDIF
1124	ENDIF
1125	IF ( gradient /= 0.0_wp ) THEN
1126	IF ( k /= nzt ) THEN
1127	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1128	ELSE
1129	pt_init(k) = pt_surface - 0.5_wp * dzu(k+1) * gradient
1130	pt_init(k+1) = pt_surface + 0.5_wp * dzu(k+1) * gradient
1131	ENDIF
1132	ELSE
1133	pt_init(k) = pt_init(k+1)
1134	ENDIF
1135	ENDDO
1136
1137	ENDIF
1138
1139	ENDIF
1140
1141	!
1142	!-- In case of no given temperature gradients, choose gradient of neutral
1143	!-- stratification
1144	IF ( pt_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1145	pt_vertical_gradient_level(1) = 0.0_wp
1146	ENDIF
1147
1148	!
1149	!-- Store temperature gradient at the top boundary for possible Neumann
1150	!-- boundary condition
1151	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1152
1153	!
1154	!-- If required, compute initial humidity or scalar profile using the given
1155	!-- humidity/scalar gradient. In case of scalar transport, initially store
1156	!-- values of the scalar parameters on humidity parameters
1157	IF ( passive_scalar ) THEN
1158	bc_q_b = bc_s_b
1159	bc_q_t = bc_s_t
1160	q_surface = s_surface
1161	q_surface_initial_change = s_surface_initial_change
1162	q_vertical_gradient = s_vertical_gradient
1163	q_vertical_gradient_level = s_vertical_gradient_level
1164	surface_waterflux = surface_scalarflux
1165	wall_humidityflux = wall_scalarflux
1166	ENDIF
1167
1168	IF ( humidity .OR. passive_scalar ) THEN
1169
1170	i = 1
1171	gradient = 0.0_wp
1172	q_vertical_gradient_level_ind(1) = 0
1173	DO k = 1, nzt+1
1174	IF ( i < 11 ) THEN
1175	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1176	q_vertical_gradient_level(i) >= 0.0_wp ) THEN
1177	gradient = q_vertical_gradient(i) / 100.0_wp
1178	q_vertical_gradient_level_ind(i) = k - 1
1179	i = i + 1
1180	ENDIF
1181	ENDIF
1182	IF ( gradient /= 0.0_wp ) THEN
1183	IF ( k /= 1 ) THEN
1184	q_init(k) = q_init(k-1) + dzu(k) * gradient
1185	ELSE
1186	q_init(k) = q_init(k-1) + dzu(k) * gradient
1187	ENDIF
1188	ELSE
1189	q_init(k) = q_init(k-1)
1190	ENDIF
1191	!
1192	!-- Avoid negative humidities
1193	IF ( q_init(k) < 0.0_wp ) THEN
1194	q_init(k) = 0.0_wp
1195	ENDIF
1196	ENDDO
1197
1198	!
1199	!-- In case of no given humidity gradients, choose zero gradient
1200	!-- conditions
1201	IF ( q_vertical_gradient_level(1) == -1.0_wp ) THEN
1202	q_vertical_gradient_level(1) = 0.0_wp
1203	ENDIF
1204	!
1205	!-- Store humidity, rain water content and rain drop concentration
1206	!-- gradient at the top boundary for possile Neumann boundary condition
1207	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1208	ENDIF
1209
1210	!
1211	!-- If required, compute initial salinity profile using the given salinity
1212	!-- gradients
1213	IF ( ocean ) THEN
1214
1215	i = 1
1216	gradient = 0.0_wp
1217
1218	sa_vertical_gradient_level_ind(1) = nzt+1
1219	DO k = nzt, 0, -1
1220	IF ( i < 11 ) THEN
1221	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1222	sa_vertical_gradient_level(i) <= 0.0_wp ) THEN
1223	gradient = sa_vertical_gradient(i) / 100.0_wp
1224	sa_vertical_gradient_level_ind(i) = k + 1
1225	i = i + 1
1226	ENDIF
1227	ENDIF
1228	IF ( gradient /= 0.0_wp ) THEN
1229	IF ( k /= nzt ) THEN
1230	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1231	ELSE
1232	sa_init(k) = sa_surface - 0.5_wp * dzu(k+1) * gradient
1233	sa_init(k+1) = sa_surface + 0.5_wp * dzu(k+1) * gradient
1234	ENDIF
1235	ELSE
1236	sa_init(k) = sa_init(k+1)
1237	ENDIF
1238	ENDDO
1239
1240	ENDIF
1241
1242	!
1243	!-- If required compute the profile of leaf area density used in the plant
1244	!-- canopy model
1245	IF ( plant_canopy ) THEN
1246
1247	i = 1
1248	gradient = 0.0_wp
1249
1250	IF ( .NOT. ocean ) THEN
1251
1252	lad(0) = lad_surface
1253
1254	lad_vertical_gradient_level_ind(1) = 0
1255	DO k = 1, pch_index
1256	IF ( i < 11 ) THEN
1257	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1258	lad_vertical_gradient_level(i) >= 0.0_wp ) THEN
1259	gradient = lad_vertical_gradient(i)
1260	lad_vertical_gradient_level_ind(i) = k - 1
1261	i = i + 1
1262	ENDIF
1263	ENDIF
1264	IF ( gradient /= 0.0_wp ) THEN
1265	IF ( k /= 1 ) THEN
1266	lad(k) = lad(k-1) + dzu(k) * gradient
1267	ELSE
1268	lad(k) = lad_surface + dzu(k) *gradient
1269	ENDIF
1270	ELSE
1271	lad(k) = lad(k-1)
1272	ENDIF
1273	ENDDO
1274
1275	ENDIF
1276
1277	!
1278	!-- In case of no given leaf area density gradients, choose a vanishing
1279	!-- gradient
1280	IF ( lad_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1281	lad_vertical_gradient_level(1) = 0.0_wp
1282	ENDIF
1283
1284	ENDIF
1285
1286	ENDIF
1287
1288	!
1289	!-- Check if the control parameter use_subsidence_tendencies is used correctly
1290	IF ( use_subsidence_tendencies .AND. .NOT. large_scale_subsidence ) THEN
1291	message_string = 'The usage of use_subsidence_tendencies ' // &
1292	'requires large_scale_subsidence = .T..'
1293	CALL message( 'check_parameters', 'PA0396', 1, 2, 0, 6, 0 )
1294	ELSEIF ( use_subsidence_tendencies .AND. .NOT. large_scale_forcing ) THEN
1295	message_string = 'The usage of use_subsidence_tendencies ' // &
1296	'requires large_scale_forcing = .T..'
1297	CALL message( 'check_parameters', 'PA0397', 1, 2, 0, 6, 0 )
1298	ENDIF
1299
1300	!
1301	!-- Initialize large scale subsidence if required
1302	If ( large_scale_subsidence ) THEN
1303	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp .AND. &
1304	.NOT. large_scale_forcing ) THEN
1305	CALL init_w_subsidence
1306	ENDIF
1307	!
1308	!-- In case large_scale_forcing is used, profiles for subsidence velocity
1309	!-- are read in from file LSF_DATA
1310
1311	IF ( subs_vertical_gradient_level(1) == -9999999.9_wp .AND. &
1312	.NOT. large_scale_forcing ) THEN
1313	message_string = 'There is no default large scale vertical ' // &
1314	'velocity profile set. Specify the subsidence ' // &
1315	'velocity profile via subs_vertical_gradient and ' // &
1316	'subs_vertical_gradient_level.'
1317	CALL message( 'check_parameters', 'PA0380', 1, 2, 0, 6, 0 )
1318	ENDIF
1319	ELSE
1320	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp ) THEN
1321	message_string = 'Enable usage of large scale subsidence by ' // &
1322	'setting large_scale_subsidence = .T..'
1323	CALL message( 'check_parameters', 'PA0381', 1, 2, 0, 6, 0 )
1324	ENDIF
1325	ENDIF
1326
1327	!
1328	!-- Compute Coriolis parameter
1329	f = 2.0_wp * omega * SIN( phi / 180.0_wp * pi )
1330	fs = 2.0_wp * omega * COS( phi / 180.0_wp * pi )
1331
1332	!
1333	!-- Check and set buoyancy related parameters and switches
1334	IF ( reference_state == 'horizontal_average' ) THEN
1335	CONTINUE
1336	ELSEIF ( reference_state == 'initial_profile' ) THEN
1337	use_initial_profile_as_reference = .TRUE.
1338	ELSEIF ( reference_state == 'single_value' ) THEN
1339	use_single_reference_value = .TRUE.
1340	IF ( pt_reference == 9999999.9_wp ) pt_reference = pt_surface
1341	vpt_reference = pt_reference * ( 1.0_wp + 0.61_wp * q_surface )
1342	ELSE
1343	message_string = 'illegal value for reference_state: "' // &
1344	TRIM( reference_state ) // '"'
1345	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1346	ENDIF
1347
1348	!
1349	!-- Ocean runs always use reference values in the buoyancy term
1350	IF ( ocean ) THEN
1351	reference_state = 'single_value'
1352	use_single_reference_value = .TRUE.
1353	ENDIF
1354
1355	!
1356	!-- Sign of buoyancy/stability terms
1357	IF ( ocean ) atmos_ocean_sign = -1.0_wp
1358
1359	!
1360	!-- Ocean version must use flux boundary conditions at the top
1361	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1362	message_string = 'use_top_fluxes must be .TRUE. in ocean mode'
1363	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1364	ENDIF
1365
1366	!
1367	!-- In case of a given slope, compute the relevant quantities
1368	IF ( alpha_surface /= 0.0_wp ) THEN
1369	IF ( ABS( alpha_surface ) > 90.0_wp ) THEN
1370	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1371	' ) must be < 90.0'
1372	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1373	ENDIF
1374	sloping_surface = .TRUE.
1375	cos_alpha_surface = COS( alpha_surface / 180.0_wp * pi )
1376	sin_alpha_surface = SIN( alpha_surface / 180.0_wp * pi )
1377	ENDIF
1378
1379	!
1380	!-- Check time step and cfl_factor
1381	IF ( dt /= -1.0_wp ) THEN
1382	IF ( dt <= 0.0_wp .AND. dt /= -1.0_wp ) THEN
1383	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1384	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1385	ENDIF
1386	dt_3d = dt
1387	dt_fixed = .TRUE.
1388	ENDIF
1389
1390	IF ( cfl_factor <= 0.0_wp .OR. cfl_factor > 1.0_wp ) THEN
1391	IF ( cfl_factor == -1.0_wp ) THEN
1392	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1393	cfl_factor = 0.8_wp
1394	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1395	cfl_factor = 0.9_wp
1396	ELSE
1397	cfl_factor = 0.9_wp
1398	ENDIF
1399	ELSE
1400	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1401	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1402	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1403	ENDIF
1404	ENDIF
1405
1406	!
1407	!-- Store simulated time at begin
1408	simulated_time_at_begin = simulated_time
1409
1410	!
1411	!-- Store reference time for coupled runs and change the coupling flag,
1412	!-- if ...
1413	IF ( simulated_time == 0.0_wp ) THEN
1414	IF ( coupling_start_time == 0.0_wp ) THEN
1415	time_since_reference_point = 0.0_wp
1416	ELSEIF ( time_since_reference_point < 0.0_wp ) THEN
1417	run_coupled = .FALSE.
1418	ENDIF
1419	ENDIF
1420
1421	!
1422	!-- Set wind speed in the Galilei-transformed system
1423	IF ( galilei_transformation ) THEN
1424	IF ( use_ug_for_galilei_tr .AND. &
1425	ug_vertical_gradient_level(1) == 0.0_wp .AND. &
1426	ug_vertical_gradient(1) == 0.0_wp .AND. &
1427	vg_vertical_gradient_level(1) == 0.0_wp .AND. &
1428	vg_vertical_gradient(1) == 0.0_wp ) THEN
1429	u_gtrans = ug_surface * 0.6_wp
1430	v_gtrans = vg_surface * 0.6_wp
1431	ELSEIF ( use_ug_for_galilei_tr .AND. &
1432	( ug_vertical_gradient_level(1) /= 0.0_wp .OR. &
1433	ug_vertical_gradient(1) /= 0.0_wp ) ) THEN
1434	message_string = 'baroclinity (ug) not allowed simultaneously' // &
1435	' with galilei transformation'
1436	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1437	ELSEIF ( use_ug_for_galilei_tr .AND. &
1438	( vg_vertical_gradient_level(1) /= 0.0_wp .OR. &
1439	vg_vertical_gradient(1) /= 0.0_wp ) ) THEN
1440	message_string = 'baroclinity (vg) not allowed simultaneously' // &
1441	' with galilei transformation'
1442	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1443	ELSE
1444	message_string = 'variable translation speed used for galilei-' // &
1445	'transformation, which may cause & instabilities in stably ' // &
1446	'stratified regions'
1447	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1448	ENDIF
1449	ENDIF
1450
1451	!
1452	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1453	!-- fluxes have to be used in the diffusion-terms
1454	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1455
1456	!
1457	!-- Check boundary conditions and set internal variables:
1458	!-- Lateral boundary conditions
1459	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1460	bc_lr /= 'radiation/dirichlet' ) THEN
1461	message_string = 'unknown boundary condition: bc_lr = "' // &
1462	TRIM( bc_lr ) // '"'
1463	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1464	ENDIF
1465	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1466	bc_ns /= 'radiation/dirichlet' ) THEN
1467	message_string = 'unknown boundary condition: bc_ns = "' // &
1468	TRIM( bc_ns ) // '"'
1469	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1470	ENDIF
1471
1472	!
1473	!-- Internal variables used for speed optimization in if clauses
1474	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1475	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1476	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1477	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1478	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1479	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1480
1481	!
1482	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1483	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1484	!-- and tools do not work with non-cyclic boundary conditions.
1485	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1486	IF ( psolver /= 'multigrid' ) THEN
1487	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1488	'psolver = "' // TRIM( psolver ) // '"'
1489	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1490	ENDIF
1491	IF ( momentum_advec /= 'pw-scheme' .AND. &
1492	momentum_advec /= 'ws-scheme') THEN
1493	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1494	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1495	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1496	ENDIF
1497	IF ( scalar_advec /= 'pw-scheme' .AND. &
1498	scalar_advec /= 'ws-scheme' ) THEN
1499	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1500	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1501	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1502	ENDIF
1503	IF ( galilei_transformation ) THEN
1504	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1505	'galilei_transformation = .T.'
1506	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1507	ENDIF
1508	ENDIF
1509
1510	!
1511	!-- Bottom boundary condition for the turbulent Kinetic energy
1512	IF ( bc_e_b == 'neumann' ) THEN
1513	ibc_e_b = 1
1514	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1515	ibc_e_b = 2
1516	IF ( .NOT. prandtl_layer ) THEN
1517	bc_e_b = 'neumann'
1518	ibc_e_b = 1
1519	message_string = 'boundary condition bc_e_b changed to "' // &
1520	TRIM( bc_e_b ) // '"'
1521	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1522	ENDIF
1523	ELSE
1524	message_string = 'unknown boundary condition: bc_e_b = "' // &
1525	TRIM( bc_e_b ) // '"'
1526	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1527	ENDIF
1528
1529	!
1530	!-- Boundary conditions for perturbation pressure
1531	IF ( bc_p_b == 'dirichlet' ) THEN
1532	ibc_p_b = 0
1533	ELSEIF ( bc_p_b == 'neumann' ) THEN
1534	ibc_p_b = 1
1535	ELSE
1536	message_string = 'unknown boundary condition: bc_p_b = "' // &
1537	TRIM( bc_p_b ) // '"'
1538	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1539	ENDIF
1540
1541	IF ( bc_p_t == 'dirichlet' ) THEN
1542	ibc_p_t = 0
1543	ELSEIF ( bc_p_t == 'neumann' ) THEN
1544	ibc_p_t = 1
1545	ELSE
1546	message_string = 'unknown boundary condition: bc_p_t = "' // &
1547	TRIM( bc_p_t ) // '"'
1548	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1549	ENDIF
1550
1551	!
1552	!-- Boundary conditions for potential temperature
1553	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1554	ibc_pt_b = 2
1555	ELSE
1556	IF ( bc_pt_b == 'dirichlet' ) THEN
1557	ibc_pt_b = 0
1558	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1559	ibc_pt_b = 1
1560	ELSE
1561	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1562	TRIM( bc_pt_b ) // '"'
1563	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1564	ENDIF
1565	ENDIF
1566
1567	IF ( bc_pt_t == 'dirichlet' ) THEN
1568	ibc_pt_t = 0
1569	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1570	ibc_pt_t = 1
1571	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1572	ibc_pt_t = 2
1573	ELSE
1574	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1575	TRIM( bc_pt_t ) // '"'
1576	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1577	ENDIF
1578
1579	IF ( surface_heatflux == 9999999.9_wp ) THEN
1580	constant_heatflux = .FALSE.
1581	IF ( large_scale_forcing ) THEN
1582	IF ( ibc_pt_b == 0 ) THEN
1583	constant_heatflux = .FALSE.
1584	ELSEIF ( ibc_pt_b == 1 ) THEN
1585	constant_heatflux = .TRUE.
1586	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1587	surface_heatflux = shf_surf(1)
1588	ENDIF
1589	ENDIF
1590	ENDIF
1591	ELSE
1592	constant_heatflux = .TRUE.
1593	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1594	large_scale_forcing ) THEN
1595	surface_heatflux = shf_surf(1)
1596	ENDIF
1597	ENDIF
1598
1599	IF ( top_heatflux == 9999999.9_wp ) constant_top_heatflux = .FALSE.
1600
1601	IF ( neutral ) THEN
1602
1603	IF ( surface_heatflux /= 0.0_wp .AND. surface_heatflux /= 9999999.9_wp ) &
1604	THEN
1605	message_string = 'heatflux must not be set for pure neutral flow'
1606	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1607	ENDIF
1608
1609	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9_wp ) &
1610	THEN
1611	message_string = 'heatflux must not be set for pure neutral flow'
1612	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1613	ENDIF
1614
1615	ENDIF
1616
1617	IF ( top_momentumflux_u /= 9999999.9_wp .AND. &
1618	top_momentumflux_v /= 9999999.9_wp ) THEN
1619	constant_top_momentumflux = .TRUE.
1620	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9_wp .AND. &
1621	top_momentumflux_v == 9999999.9_wp ) ) THEN
1622	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1623	'must be set'
1624	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1625	ENDIF
1626
1627	!
1628	!-- A given surface temperature implies Dirichlet boundary condition for
1629	!-- temperature. In this case specification of a constant heat flux is
1630	!-- forbidden.
1631	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1632	surface_heatflux /= 0.0_wp ) THEN
1633	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1634	'& is not allowed with constant_heatflux = .TRUE.'
1635	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1636	ENDIF
1637	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0_wp ) THEN
1638	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1639	'wed with pt_surface_initial_change (/=0) = ', &
1640	pt_surface_initial_change
1641	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1642	ENDIF
1643
1644	!
1645	!-- A given temperature at the top implies Dirichlet boundary condition for
1646	!-- temperature. In this case specification of a constant heat flux is
1647	!-- forbidden.
1648	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1649	top_heatflux /= 0.0_wp ) THEN
1650	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1651	'" is not allowed with constant_top_heatflux = .TRUE.'
1652	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1653	ENDIF
1654
1655	!
1656	!-- Boundary conditions for salinity
1657	IF ( ocean ) THEN
1658	IF ( bc_sa_t == 'dirichlet' ) THEN
1659	ibc_sa_t = 0
1660	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1661	ibc_sa_t = 1
1662	ELSE
1663	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1664	TRIM( bc_sa_t ) // '"'
1665	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1666	ENDIF
1667
1668	IF ( top_salinityflux == 9999999.9_wp ) constant_top_salinityflux = .FALSE.
1669	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9_wp ) THEN
1670	message_string = 'boundary condition: bc_sa_t = "' // &
1671	TRIM( bc_sa_t ) // '" requires to set ' // &
1672	'top_salinityflux'
1673	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1674	ENDIF
1675
1676	!
1677	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1678	!-- salinity. In this case specification of a constant salinity flux is
1679	!-- forbidden.
1680	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1681	top_salinityflux /= 0.0_wp ) THEN
1682	message_string = 'boundary condition: bc_sa_t = "' // &
1683	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1684	'constant_top_salinityflux = .TRUE.'
1685	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1686	ENDIF
1687
1688	ENDIF
1689
1690	!
1691	!-- In case of humidity or passive scalar, set boundary conditions for total
1692	!-- water content / scalar
1693	IF ( humidity .OR. passive_scalar ) THEN
1694	IF ( humidity ) THEN
1695	sq = 'q'
1696	ELSE
1697	sq = 's'
1698	ENDIF
1699	IF ( bc_q_b == 'dirichlet' ) THEN
1700	ibc_q_b = 0
1701	ELSEIF ( bc_q_b == 'neumann' ) THEN
1702	ibc_q_b = 1
1703	ELSE
1704	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1705	'_b ="' // TRIM( bc_q_b ) // '"'
1706	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1707	ENDIF
1708	IF ( bc_q_t == 'dirichlet' ) THEN
1709	ibc_q_t = 0
1710	ELSEIF ( bc_q_t == 'neumann' ) THEN
1711	ibc_q_t = 1
1712	ELSE
1713	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1714	'_t ="' // TRIM( bc_q_t ) // '"'
1715	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1716	ENDIF
1717
1718	IF ( surface_waterflux == 9999999.9_wp ) THEN
1719	constant_waterflux = .FALSE.
1720	IF ( large_scale_forcing ) THEN
1721	IF ( ibc_q_b == 0 ) THEN
1722	constant_waterflux = .FALSE.
1723	ELSEIF ( ibc_q_b == 1 ) THEN
1724	constant_waterflux = .TRUE.
1725	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1726	surface_waterflux = qsws_surf(1)
1727	ENDIF
1728	ENDIF
1729	ENDIF
1730	ELSE
1731	constant_waterflux = .TRUE.
1732	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1733	large_scale_forcing ) THEN
1734	surface_waterflux = qsws_surf(1)
1735	ENDIF
1736	ENDIF
1737
1738	!
1739	!-- A given surface humidity implies Dirichlet boundary condition for
1740	!-- humidity. In this case specification of a constant water flux is
1741	!-- forbidden.
1742	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1743	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1744	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1745	'th prescribed surface flux'
1746	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1747	ENDIF
1748	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0_wp ) THEN
1749	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1750	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1751	q_surface_initial_change
1752	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1753	ENDIF
1754
1755	ENDIF
1756	!
1757	!-- Boundary conditions for horizontal components of wind speed
1758	IF ( bc_uv_b == 'dirichlet' ) THEN
1759	ibc_uv_b = 0
1760	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1761	ibc_uv_b = 1
1762	IF ( prandtl_layer ) THEN
1763	message_string = 'boundary condition: bc_uv_b = "' // &
1764	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1765	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1766	ENDIF
1767	ELSE
1768	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1769	TRIM( bc_uv_b ) // '"'
1770	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1771	ENDIF
1772	!
1773	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1774	!-- assigned with the u and v values of the ocean surface
1775	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1776	ibc_uv_b = 2
1777	ENDIF
1778
1779	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1780	bc_uv_t = 'neumann'
1781	ibc_uv_t = 1
1782	ELSE
1783	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1784	ibc_uv_t = 0
1785	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1786	!
1787	!-- Velocities for the initial u,v-profiles are set zero at the top
1788	!-- in case of dirichlet_0 conditions
1789	u_init(nzt+1) = 0.0_wp
1790	v_init(nzt+1) = 0.0_wp
1791	ENDIF
1792	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1793	ibc_uv_t = 1
1794	ELSE
1795	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1796	TRIM( bc_uv_t ) // '"'
1797	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1798	ENDIF
1799	ENDIF
1800
1801	!
1802	!-- Compute and check, respectively, the Rayleigh Damping parameter
1803	IF ( rayleigh_damping_factor == -1.0_wp ) THEN
1804	rayleigh_damping_factor = 0.0_wp
1805	ELSE
1806	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0_wp ) &
1807	THEN
1808	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1809	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1810	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1811	ENDIF
1812	ENDIF
1813
1814	IF ( rayleigh_damping_height == -1.0_wp ) THEN
1815	IF ( .NOT. ocean ) THEN
1816	rayleigh_damping_height = 0.66666666666_wp * zu(nzt)
1817	ELSE
1818	rayleigh_damping_height = 0.66666666666_wp * zu(nzb)
1819	ENDIF
1820	ELSE
1821	IF ( .NOT. ocean ) THEN
1822	IF ( rayleigh_damping_height < 0.0_wp .OR. &
1823	rayleigh_damping_height > zu(nzt) ) THEN
1824	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1825	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1826	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1827	ENDIF
1828	ELSE
1829	IF ( rayleigh_damping_height > 0.0_wp .OR. &
1830	rayleigh_damping_height < zu(nzb) ) THEN
1831	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1832	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1833	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1834	ENDIF
1835	ENDIF
1836	ENDIF
1837
1838	!
1839	!-- Check number of chosen statistic regions. More than 10 regions are not
1840	!-- allowed, because so far no more than 10 corresponding output files can
1841	!-- be opened (cf. check_open)
1842	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1843	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1844	statistic_regions+1, ' but only 10 regions are allowed'
1845	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1846	ENDIF
1847	IF ( normalizing_region > statistic_regions .OR. &
1848	normalizing_region < 0) THEN
1849	WRITE ( message_string, * ) 'normalizing_region = ', &
1850	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1851	' (value of statistic_regions)'
1852	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1853	ENDIF
1854
1855	!
1856	!-- Set the default intervals for data output, if necessary
1857	!-- NOTE: dt_dosp has already been set in package_parin
1858	IF ( dt_data_output /= 9999999.9_wp ) THEN
1859	IF ( dt_dopr == 9999999.9_wp ) dt_dopr = dt_data_output
1860	IF ( dt_dopts == 9999999.9_wp ) dt_dopts = dt_data_output
1861	IF ( dt_do2d_xy == 9999999.9_wp ) dt_do2d_xy = dt_data_output
1862	IF ( dt_do2d_xz == 9999999.9_wp ) dt_do2d_xz = dt_data_output
1863	IF ( dt_do2d_yz == 9999999.9_wp ) dt_do2d_yz = dt_data_output
1864	IF ( dt_do3d == 9999999.9_wp ) dt_do3d = dt_data_output
1865	IF ( dt_data_output_av == 9999999.9_wp ) dt_data_output_av = dt_data_output
1866	DO mid = 1, max_masks
1867	IF ( dt_domask(mid) == 9999999.9_wp ) dt_domask(mid) = dt_data_output
1868	ENDDO
1869	ENDIF
1870
1871	!
1872	!-- Set the default skip time intervals for data output, if necessary
1873	IF ( skip_time_dopr == 9999999.9_wp ) &
1874	skip_time_dopr = skip_time_data_output
1875	IF ( skip_time_dosp == 9999999.9_wp ) &
1876	skip_time_dosp = skip_time_data_output
1877	IF ( skip_time_do2d_xy == 9999999.9_wp ) &
1878	skip_time_do2d_xy = skip_time_data_output
1879	IF ( skip_time_do2d_xz == 9999999.9_wp ) &
1880	skip_time_do2d_xz = skip_time_data_output
1881	IF ( skip_time_do2d_yz == 9999999.9_wp ) &
1882	skip_time_do2d_yz = skip_time_data_output
1883	IF ( skip_time_do3d == 9999999.9_wp ) &
1884	skip_time_do3d = skip_time_data_output
1885	IF ( skip_time_data_output_av == 9999999.9_wp ) &
1886	skip_time_data_output_av = skip_time_data_output
1887	DO mid = 1, max_masks
1888	IF ( skip_time_domask(mid) == 9999999.9_wp ) &
1889	skip_time_domask(mid) = skip_time_data_output
1890	ENDDO
1891
1892	!
1893	!-- Check the average intervals (first for 3d-data, then for profiles and
1894	!-- spectra)
1895	IF ( averaging_interval > dt_data_output_av ) THEN
1896	WRITE( message_string, * ) 'averaging_interval = ', &
1897	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1898	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1899	ENDIF
1900
1901	IF ( averaging_interval_pr == 9999999.9_wp ) THEN
1902	averaging_interval_pr = averaging_interval
1903	ENDIF
1904
1905	IF ( averaging_interval_pr > dt_dopr ) THEN
1906	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1907	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1908	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1909	ENDIF
1910
1911	IF ( averaging_interval_sp == 9999999.9_wp ) THEN
1912	averaging_interval_sp = averaging_interval
1913	ENDIF
1914
1915	IF ( averaging_interval_sp > dt_dosp ) THEN
1916	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1917	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1918	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1919	ENDIF
1920
1921	!
1922	!-- Set the default interval for profiles entering the temporal average
1923	IF ( dt_averaging_input_pr == 9999999.9_wp ) THEN
1924	dt_averaging_input_pr = dt_averaging_input
1925	ENDIF
1926
1927	!
1928	!-- Set the default interval for the output of timeseries to a reasonable
1929	!-- value (tries to minimize the number of calls of flow_statistics)
1930	IF ( dt_dots == 9999999.9_wp ) THEN
1931	IF ( averaging_interval_pr == 0.0_wp ) THEN
1932	dt_dots = MIN( dt_run_control, dt_dopr )
1933	ELSE
1934	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1935	ENDIF
1936	ENDIF
1937
1938	!
1939	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1940	IF ( dt_averaging_input > averaging_interval ) THEN
1941	WRITE( message_string, * ) 'dt_averaging_input = ', &
1942	dt_averaging_input, ' must be <= averaging_interval = ', &
1943	averaging_interval
1944	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1945	ENDIF
1946
1947	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1948	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1949	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1950	averaging_interval_pr
1951	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1952	ENDIF
1953
1954	!
1955	!-- Set the default value for the integration interval of precipitation amount
1956	IF ( precipitation ) THEN
1957	IF ( precipitation_amount_interval == 9999999.9_wp ) THEN
1958	precipitation_amount_interval = dt_do2d_xy
1959	ELSE
1960	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1961	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1962	precipitation_amount_interval, ' must not be larger than ', &
1963	'dt_do2d_xy = ', dt_do2d_xy
1964	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1965	ENDIF
1966	ENDIF
1967	ENDIF
1968
1969	!
1970	!-- Determine the number of output profiles and check whether they are
1971	!-- permissible
1972	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1973
1974	dopr_n = dopr_n + 1
1975	i = dopr_n
1976
1977	!
1978	!-- Determine internal profile number (for hom, homs)
1979	!-- and store height levels
1980	SELECT CASE ( TRIM( data_output_pr(i) ) )
1981
1982	CASE ( 'u', '#u' )
1983	dopr_index(i) = 1
1984	dopr_unit(i) = 'm/s'
1985	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1986	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1987	dopr_initial_index(i) = 5
1988	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1989	data_output_pr(i) = data_output_pr(i)(2:)
1990	ENDIF
1991
1992	CASE ( 'v', '#v' )
1993	dopr_index(i) = 2
1994	dopr_unit(i) = 'm/s'
1995	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1996	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1997	dopr_initial_index(i) = 6
1998	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1999	data_output_pr(i) = data_output_pr(i)(2:)
2000	ENDIF
2001
2002	CASE ( 'w' )
2003	dopr_index(i) = 3
2004	dopr_unit(i) = 'm/s'
2005	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2006
2007	CASE ( 'pt', '#pt' )
2008	IF ( .NOT. cloud_physics ) THEN
2009	dopr_index(i) = 4
2010	dopr_unit(i) = 'K'
2011	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2012	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2013	dopr_initial_index(i) = 7
2014	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2015	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
2016	data_output_pr(i) = data_output_pr(i)(2:)
2017	ENDIF
2018	ELSE
2019	dopr_index(i) = 43
2020	dopr_unit(i) = 'K'
2021	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2022	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2023	dopr_initial_index(i) = 28
2024	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2025	hom(nzb,2,28,:) = 0.0_wp ! because zu(nzb) is negative
2026	data_output_pr(i) = data_output_pr(i)(2:)
2027	ENDIF
2028	ENDIF
2029
2030	CASE ( 'e' )
2031	dopr_index(i) = 8
2032	dopr_unit(i) = 'm2/s2'
2033	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2034	hom(nzb,2,8,:) = 0.0_wp
2035
2036	CASE ( 'km', '#km' )
2037	dopr_index(i) = 9
2038	dopr_unit(i) = 'm2/s'
2039	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2040	hom(nzb,2,9,:) = 0.0_wp
2041	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2042	dopr_initial_index(i) = 23
2043	hom(:,2,23,:) = hom(:,2,9,:)
2044	data_output_pr(i) = data_output_pr(i)(2:)
2045	ENDIF
2046
2047	CASE ( 'kh', '#kh' )
2048	dopr_index(i) = 10
2049	dopr_unit(i) = 'm2/s'
2050	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2051	hom(nzb,2,10,:) = 0.0_wp
2052	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2053	dopr_initial_index(i) = 24
2054	hom(:,2,24,:) = hom(:,2,10,:)
2055	data_output_pr(i) = data_output_pr(i)(2:)
2056	ENDIF
2057
2058	CASE ( 'l', '#l' )
2059	dopr_index(i) = 11
2060	dopr_unit(i) = 'm'
2061	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2062	hom(nzb,2,11,:) = 0.0_wp
2063	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2064	dopr_initial_index(i) = 25
2065	hom(:,2,25,:) = hom(:,2,11,:)
2066	data_output_pr(i) = data_output_pr(i)(2:)
2067	ENDIF
2068
2069	CASE ( 'w"u"' )
2070	dopr_index(i) = 12
2071	dopr_unit(i) = 'm2/s2'
2072	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2073	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2074
2075	CASE ( 'wu' )
2076	dopr_index(i) = 13
2077	dopr_unit(i) = 'm2/s2'
2078	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2079
2080	CASE ( 'w"v"' )
2081	dopr_index(i) = 14
2082	dopr_unit(i) = 'm2/s2'
2083	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2084	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2085
2086	CASE ( 'wv' )
2087	dopr_index(i) = 15
2088	dopr_unit(i) = 'm2/s2'
2089	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2090
2091	CASE ( 'w"pt"' )
2092	dopr_index(i) = 16
2093	dopr_unit(i) = 'K m/s'
2094	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2095
2096	CASE ( 'wpt' )
2097	dopr_index(i) = 17
2098	dopr_unit(i) = 'K m/s'
2099	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2100
2101	CASE ( 'wpt' )
2102	dopr_index(i) = 18
2103	dopr_unit(i) = 'K m/s'
2104	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2105
2106	CASE ( 'wu' )
2107	dopr_index(i) = 19
2108	dopr_unit(i) = 'm2/s2'
2109	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2110	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2111
2112	CASE ( 'wv' )
2113	dopr_index(i) = 20
2114	dopr_unit(i) = 'm2/s2'
2115	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2116	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2117
2118	CASE ( 'wptBC' )
2119	dopr_index(i) = 21
2120	dopr_unit(i) = 'K m/s'
2121	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2122
2123	CASE ( 'wptBC' )
2124	dopr_index(i) = 22
2125	dopr_unit(i) = 'K m/s'
2126	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2127
2128	CASE ( 'sa', '#sa' )
2129	IF ( .NOT. ocean ) THEN
2130	message_string = 'data_output_pr = ' // &
2131	TRIM( data_output_pr(i) ) // ' is not imp' // &
2132	'lemented for ocean = .FALSE.'
2133	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2134	ELSE
2135	dopr_index(i) = 23
2136	dopr_unit(i) = 'psu'
2137	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2138	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2139	dopr_initial_index(i) = 26
2140	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2141	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2142	data_output_pr(i) = data_output_pr(i)(2:)
2143	ENDIF
2144	ENDIF
2145
2146	CASE ( 'u*2' )
2147	dopr_index(i) = 30
2148	dopr_unit(i) = 'm2/s2'
2149	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2150
2151	CASE ( 'v*2' )
2152	dopr_index(i) = 31
2153	dopr_unit(i) = 'm2/s2'
2154	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2155
2156	CASE ( 'w*2' )
2157	dopr_index(i) = 32
2158	dopr_unit(i) = 'm2/s2'
2159	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2160
2161	CASE ( 'pt*2' )
2162	dopr_index(i) = 33
2163	dopr_unit(i) = 'K2'
2164	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2165
2166	CASE ( 'e*' )
2167	dopr_index(i) = 34
2168	dopr_unit(i) = 'm2/s2'
2169	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2170
2171	CASE ( 'w2pt' )
2172	dopr_index(i) = 35
2173	dopr_unit(i) = 'K m2/s2'
2174	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2175
2176	CASE ( 'wpt2' )
2177	dopr_index(i) = 36
2178	dopr_unit(i) = 'K2 m/s'
2179	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2180
2181	CASE ( 'we' )
2182	dopr_index(i) = 37
2183	dopr_unit(i) = 'm3/s3'
2184	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2185
2186	CASE ( 'w*3' )
2187	dopr_index(i) = 38
2188	dopr_unit(i) = 'm3/s3'
2189	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2190
2191	CASE ( 'Sw' )
2192	dopr_index(i) = 39
2193	dopr_unit(i) = 'none'
2194	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2195
2196	CASE ( 'p' )
2197	dopr_index(i) = 40
2198	dopr_unit(i) = 'Pa'
2199	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2200
2201	CASE ( 'q', '#q' )
2202	IF ( .NOT. humidity ) THEN
2203	message_string = 'data_output_pr = ' // &
2204	TRIM( data_output_pr(i) ) // ' is not imp' // &
2205	'lemented for humidity = .FALSE.'
2206	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2207	ELSE
2208	dopr_index(i) = 41
2209	dopr_unit(i) = 'kg/kg'
2210	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2211	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2212	dopr_initial_index(i) = 26
2213	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2214	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2215	data_output_pr(i) = data_output_pr(i)(2:)
2216	ENDIF
2217	ENDIF
2218
2219	CASE ( 's', '#s' )
2220	IF ( .NOT. passive_scalar ) THEN
2221	message_string = 'data_output_pr = ' // &
2222	TRIM( data_output_pr(i) ) // ' is not imp' // &
2223	'lemented for passive_scalar = .FALSE.'
2224	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2225	ELSE
2226	dopr_index(i) = 41
2227	dopr_unit(i) = 'kg/m3'
2228	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2229	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2230	dopr_initial_index(i) = 26
2231	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2232	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2233	data_output_pr(i) = data_output_pr(i)(2:)
2234	ENDIF
2235	ENDIF
2236
2237	CASE ( 'qv', '#qv' )
2238	IF ( .NOT. cloud_physics ) THEN
2239	dopr_index(i) = 41
2240	dopr_unit(i) = 'kg/kg'
2241	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2242	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2243	dopr_initial_index(i) = 26
2244	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2245	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
2246	data_output_pr(i) = data_output_pr(i)(2:)
2247	ENDIF
2248	ELSE
2249	dopr_index(i) = 42
2250	dopr_unit(i) = 'kg/kg'
2251	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2252	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2253	dopr_initial_index(i) = 27
2254	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2255	hom(nzb,2,27,:) = 0.0_wp ! because zu(nzb) is negative
2256	data_output_pr(i) = data_output_pr(i)(2:)
2257	ENDIF
2258	ENDIF
2259
2260	CASE ( 'lpt', '#lpt' )
2261	IF ( .NOT. cloud_physics ) THEN
2262	message_string = 'data_output_pr = ' // &
2263	TRIM( data_output_pr(i) ) // ' is not imp' // &
2264	'lemented for cloud_physics = .FALSE.'
2265	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2266	ELSE
2267	dopr_index(i) = 4
2268	dopr_unit(i) = 'K'
2269	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2270	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2271	dopr_initial_index(i) = 7
2272	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2273	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
2274	data_output_pr(i) = data_output_pr(i)(2:)
2275	ENDIF
2276	ENDIF
2277
2278	CASE ( 'vpt', '#vpt' )
2279	dopr_index(i) = 44
2280	dopr_unit(i) = 'K'
2281	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2282	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2283	dopr_initial_index(i) = 29
2284	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2285	hom(nzb,2,29,:) = 0.0_wp ! because zu(nzb) is negative
2286	data_output_pr(i) = data_output_pr(i)(2:)
2287	ENDIF
2288
2289	CASE ( 'w"vpt"' )
2290	dopr_index(i) = 45
2291	dopr_unit(i) = 'K m/s'
2292	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2293
2294	CASE ( 'wvpt' )
2295	dopr_index(i) = 46
2296	dopr_unit(i) = 'K m/s'
2297	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2298
2299	CASE ( 'wvpt' )
2300	dopr_index(i) = 47
2301	dopr_unit(i) = 'K m/s'
2302	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2303
2304	CASE ( 'w"q"' )
2305	IF ( .NOT. humidity ) THEN
2306	message_string = 'data_output_pr = ' // &
2307	TRIM( data_output_pr(i) ) // ' is not imp' // &
2308	'lemented for humidity = .FALSE.'
2309	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2310	ELSE
2311	dopr_index(i) = 48
2312	dopr_unit(i) = 'kg/kg m/s'
2313	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2314	ENDIF
2315
2316	CASE ( 'wq' )
2317	IF ( .NOT. humidity ) THEN
2318	message_string = 'data_output_pr = ' // &
2319	TRIM( data_output_pr(i) ) // ' is not imp' // &
2320	'lemented for humidity = .FALSE.'
2321	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2322	ELSE
2323	dopr_index(i) = 49
2324	dopr_unit(i) = 'kg/kg m/s'
2325	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2326	ENDIF
2327
2328	CASE ( 'wq' )
2329	IF ( .NOT. humidity ) THEN
2330	message_string = 'data_output_pr = ' // &
2331	TRIM( data_output_pr(i) ) // ' is not imp' // &
2332	'lemented for humidity = .FALSE.'
2333	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2334	ELSE
2335	dopr_index(i) = 50
2336	dopr_unit(i) = 'kg/kg m/s'
2337	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2338	ENDIF
2339
2340	CASE ( 'w"s"' )
2341	IF ( .NOT. passive_scalar ) THEN
2342	message_string = 'data_output_pr = ' // &
2343	TRIM( data_output_pr(i) ) // ' is not imp' // &
2344	'lemented for passive_scalar = .FALSE.'
2345	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2346	ELSE
2347	dopr_index(i) = 48
2348	dopr_unit(i) = 'kg/m3 m/s'
2349	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2350	ENDIF
2351
2352	CASE ( 'ws' )
2353	IF ( .NOT. passive_scalar ) THEN
2354	message_string = 'data_output_pr = ' // &
2355	TRIM( data_output_pr(i) ) // ' is not imp' // &
2356	'lemented for passive_scalar = .FALSE.'
2357	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2358	ELSE
2359	dopr_index(i) = 49
2360	dopr_unit(i) = 'kg/m3 m/s'
2361	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2362	ENDIF
2363
2364	CASE ( 'ws' )
2365	IF ( .NOT. passive_scalar ) THEN
2366	message_string = 'data_output_pr = ' // &
2367	TRIM( data_output_pr(i) ) // ' is not imp' // &
2368	'lemented for passive_scalar = .FALSE.'
2369	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2370	ELSE
2371	dopr_index(i) = 50
2372	dopr_unit(i) = 'kg/m3 m/s'
2373	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2374	ENDIF
2375
2376	CASE ( 'w"qv"' )
2377	IF ( humidity .AND. .NOT. cloud_physics ) &
2378	THEN
2379	dopr_index(i) = 48
2380	dopr_unit(i) = 'kg/kg m/s'
2381	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2382	ELSEIF( humidity .AND. cloud_physics ) THEN
2383	dopr_index(i) = 51
2384	dopr_unit(i) = 'kg/kg m/s'
2385	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2386	ELSE
2387	message_string = 'data_output_pr = ' // &
2388	TRIM( data_output_pr(i) ) // ' is not imp' // &
2389	'lemented for cloud_physics = .FALSE. an&' // &
2390	'd humidity = .FALSE.'
2391	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2392	ENDIF
2393
2394	CASE ( 'wqv' )
2395	IF ( humidity .AND. .NOT. cloud_physics ) &
2396	THEN
2397	dopr_index(i) = 49
2398	dopr_unit(i) = 'kg/kg m/s'
2399	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2400	ELSEIF( humidity .AND. cloud_physics ) THEN
2401	dopr_index(i) = 52
2402	dopr_unit(i) = 'kg/kg m/s'
2403	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2404	ELSE
2405	message_string = 'data_output_pr = ' // &
2406	TRIM( data_output_pr(i) ) // ' is not imp' // &
2407	'lemented for cloud_physics = .FALSE. an&' // &
2408	'd humidity = .FALSE.'
2409	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2410	ENDIF
2411
2412	CASE ( 'wqv' )
2413	IF ( humidity .AND. .NOT. cloud_physics ) &
2414	THEN
2415	dopr_index(i) = 50
2416	dopr_unit(i) = 'kg/kg m/s'
2417	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2418	ELSEIF( humidity .AND. cloud_physics ) THEN
2419	dopr_index(i) = 53
2420	dopr_unit(i) = 'kg/kg m/s'
2421	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2422	ELSE
2423	message_string = 'data_output_pr = ' // &
2424	TRIM( data_output_pr(i) ) // ' is not imp' // &
2425	'lemented for cloud_physics = .FALSE. an&' // &
2426	'd humidity = .FALSE.'
2427	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2428	ENDIF
2429
2430	CASE ( 'ql' )
2431	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2432	message_string = 'data_output_pr = ' // &
2433	TRIM( data_output_pr(i) ) // ' is not imp' // &
2434	'lemented for cloud_physics = .FALSE. or' // &
2435	'&cloud_droplets = .FALSE.'
2436	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2437	ELSE
2438	dopr_index(i) = 54
2439	dopr_unit(i) = 'kg/kg'
2440	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2441	ENDIF
2442
2443	CASE ( 'wuu*:dz' )
2444	dopr_index(i) = 55
2445	dopr_unit(i) = 'm2/s3'
2446	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2447
2448	CASE ( 'wp:dz' )
2449	dopr_index(i) = 56
2450	dopr_unit(i) = 'm2/s3'
2451	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2452
2453	CASE ( 'w"e:dz' )
2454	dopr_index(i) = 57
2455	dopr_unit(i) = 'm2/s3'
2456	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2457
2458
2459	CASE ( 'u"pt"' )
2460	dopr_index(i) = 58
2461	dopr_unit(i) = 'K m/s'
2462	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2463
2464	CASE ( 'upt' )
2465	dopr_index(i) = 59
2466	dopr_unit(i) = 'K m/s'
2467	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2468
2469	CASE ( 'upt_t' )
2470	dopr_index(i) = 60
2471	dopr_unit(i) = 'K m/s'
2472	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2473
2474	CASE ( 'v"pt"' )
2475	dopr_index(i) = 61
2476	dopr_unit(i) = 'K m/s'
2477	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2478
2479	CASE ( 'vpt' )
2480	dopr_index(i) = 62
2481	dopr_unit(i) = 'K m/s'
2482	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2483
2484	CASE ( 'vpt_t' )
2485	dopr_index(i) = 63
2486	dopr_unit(i) = 'K m/s'
2487	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2488
2489	CASE ( 'rho' )
2490	IF ( .NOT. ocean ) THEN
2491	message_string = 'data_output_pr = ' // &
2492	TRIM( data_output_pr(i) ) // ' is not imp' // &
2493	'lemented for ocean = .FALSE.'
2494	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2495	ELSE
2496	dopr_index(i) = 64
2497	dopr_unit(i) = 'kg/m3'
2498	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2499	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2500	dopr_initial_index(i) = 77
2501	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
2502	hom(nzb,2,77,:) = 0.0_wp ! because zu(nzb) is negative
2503	data_output_pr(i) = data_output_pr(i)(2:)
2504	ENDIF
2505	ENDIF
2506
2507	CASE ( 'w"sa"' )
2508	IF ( .NOT. ocean ) THEN
2509	message_string = 'data_output_pr = ' // &
2510	TRIM( data_output_pr(i) ) // ' is not imp' // &
2511	'lemented for ocean = .FALSE.'
2512	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2513	ELSE
2514	dopr_index(i) = 65
2515	dopr_unit(i) = 'psu m/s'
2516	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2517	ENDIF
2518
2519	CASE ( 'wsa' )
2520	IF ( .NOT. ocean ) THEN
2521	message_string = 'data_output_pr = ' // &
2522	TRIM( data_output_pr(i) ) // ' is not imp' // &
2523	'lemented for ocean = .FALSE.'
2524	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2525	ELSE
2526	dopr_index(i) = 66
2527	dopr_unit(i) = 'psu m/s'
2528	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2529	ENDIF
2530
2531	CASE ( 'wsa' )
2532	IF ( .NOT. ocean ) THEN
2533	message_string = 'data_output_pr = ' // &
2534	TRIM( data_output_pr(i) ) // ' is not imp' // &
2535	'lemented for ocean = .FALSE.'
2536	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2537	ELSE
2538	dopr_index(i) = 67
2539	dopr_unit(i) = 'psu m/s'
2540	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2541	ENDIF
2542
2543	CASE ( 'wp' )
2544	dopr_index(i) = 68
2545	dopr_unit(i) = 'm3/s3'
2546	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2547
2548	CASE ( 'w"e' )
2549	dopr_index(i) = 69
2550	dopr_unit(i) = 'm3/s3'
2551	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2552
2553	CASE ( 'q*2' )
2554	IF ( .NOT. humidity ) THEN
2555	message_string = 'data_output_pr = ' // &
2556	TRIM( data_output_pr(i) ) // ' is not imp' // &
2557	'lemented for humidity = .FALSE.'
2558	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2559	ELSE
2560	dopr_index(i) = 70
2561	dopr_unit(i) = 'kg2/kg2'
2562	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2563	ENDIF
2564
2565	CASE ( 'prho' )
2566	IF ( .NOT. ocean ) THEN
2567	message_string = 'data_output_pr = ' // &
2568	TRIM( data_output_pr(i) ) // ' is not imp' // &
2569	'lemented for ocean = .FALSE.'
2570	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2571	ELSE
2572	dopr_index(i) = 71
2573	dopr_unit(i) = 'kg/m3'
2574	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2575	ENDIF
2576
2577	CASE ( 'hyp' )
2578	dopr_index(i) = 72
2579	dopr_unit(i) = 'dbar'
2580	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2581
2582	CASE ( 'nr' )
2583	IF ( .NOT. cloud_physics ) THEN
2584	message_string = 'data_output_pr = ' // &
2585	TRIM( data_output_pr(i) ) // ' is not imp' // &
2586	'lemented for cloud_physics = .FALSE.'
2587	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2588	ELSEIF ( icloud_scheme /= 0 ) THEN
2589	message_string = 'data_output_pr = ' // &
2590	TRIM( data_output_pr(i) ) // ' is not imp' // &
2591	'lemented for cloud_scheme /= seifert_beheng'
2592	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2593	ELSEIF ( .NOT. precipitation ) THEN
2594	message_string = 'data_output_pr = ' // &
2595	TRIM( data_output_pr(i) ) // ' is not imp' // &
2596	'lemented for precipitation = .FALSE.'
2597	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2598	ELSE
2599	dopr_index(i) = 73
2600	dopr_unit(i) = '1/m3'
2601	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2602	ENDIF
2603
2604	CASE ( 'qr' )
2605	IF ( .NOT. cloud_physics ) THEN
2606	message_string = 'data_output_pr = ' // &
2607	TRIM( data_output_pr(i) ) // ' is not imp' // &
2608	'lemented for cloud_physics = .FALSE.'
2609	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2610	ELSEIF ( icloud_scheme /= 0 ) THEN
2611	message_string = 'data_output_pr = ' // &
2612	TRIM( data_output_pr(i) ) // ' is not imp' // &
2613	'lemented for cloud_scheme /= seifert_beheng'
2614	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2615	ELSEIF ( .NOT. precipitation ) THEN
2616	message_string = 'data_output_pr = ' // &
2617	TRIM( data_output_pr(i) ) // ' is not imp' // &
2618	'lemented for precipitation = .FALSE.'
2619	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2620	ELSE
2621	dopr_index(i) = 74
2622	dopr_unit(i) = 'kg/kg'
2623	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2624	ENDIF
2625
2626	CASE ( 'qc' )
2627	IF ( .NOT. cloud_physics ) THEN
2628	message_string = 'data_output_pr = ' // &
2629	TRIM( data_output_pr(i) ) // ' is not imp' // &
2630	'lemented for cloud_physics = .FALSE.'
2631	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2632	ELSEIF ( icloud_scheme /= 0 ) THEN
2633	message_string = 'data_output_pr = ' // &
2634	TRIM( data_output_pr(i) ) // ' is not imp' // &
2635	'lemented for cloud_scheme /= seifert_beheng'
2636	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2637	ELSE
2638	dopr_index(i) = 75
2639	dopr_unit(i) = 'kg/kg'
2640	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2641	ENDIF
2642
2643	CASE ( 'prr' )
2644	IF ( .NOT. cloud_physics ) THEN
2645	message_string = 'data_output_pr = ' // &
2646	TRIM( data_output_pr(i) ) // ' is not imp' // &
2647	'lemented for cloud_physics = .FALSE.'
2648	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2649	ELSEIF ( icloud_scheme /= 0 ) THEN
2650	message_string = 'data_output_pr = ' // &
2651	TRIM( data_output_pr(i) ) // ' is not imp' // &
2652	'lemented for cloud_scheme /= seifert_beheng'
2653	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2654	ELSEIF ( .NOT. precipitation ) THEN
2655	message_string = 'data_output_pr = ' // &
2656	TRIM( data_output_pr(i) ) // ' is not imp' // &
2657	'lemented for precipitation = .FALSE.'
2658	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2659
2660	ELSE
2661	dopr_index(i) = 76
2662	dopr_unit(i) = 'kg/kg m/s'
2663	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2664	ENDIF
2665
2666	CASE ( 'ug' )
2667	dopr_index(i) = 78
2668	dopr_unit(i) = 'm/s'
2669	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
2670
2671	CASE ( 'vg' )
2672	dopr_index(i) = 79
2673	dopr_unit(i) = 'm/s'
2674	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
2675
2676	CASE ( 'w_subs' )
2677	IF ( .NOT. large_scale_subsidence ) THEN
2678	message_string = 'data_output_pr = ' // &
2679	TRIM( data_output_pr(i) ) // ' is not imp' // &
2680	'lemented for large_scale_subsidence = .FALSE.'
2681	CALL message( 'check_parameters', 'PA0382', 1, 2, 0, 6, 0 )
2682	ELSE
2683	dopr_index(i) = 80
2684	dopr_unit(i) = 'm/s'
2685	hom(:,2,80,:) = SPREAD( zu, 2, statistic_regions+1 )
2686	ENDIF
2687
2688	CASE ( 'td_lsa_lpt' )
2689	IF ( .NOT. large_scale_forcing ) THEN
2690	message_string = 'data_output_pr = ' // &
2691	TRIM( data_output_pr(i) ) // ' is not imp' // &
2692	'lemented for large_scale_forcing = .FALSE.'
2693	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
2694	ELSE
2695	dopr_index(i) = 81
2696	dopr_unit(i) = 'K/s'
2697	hom(:,2,81,:) = SPREAD( zu, 2, statistic_regions+1 )
2698	ENDIF
2699
2700	CASE ( 'td_lsa_q' )
2701	IF ( .NOT. large_scale_forcing ) THEN
2702	message_string = 'data_output_pr = ' // &
2703	TRIM( data_output_pr(i) ) // ' is not imp' // &
2704	'lemented for large_scale_forcing = .FALSE.'
2705	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
2706	ELSE
2707	dopr_index(i) = 82
2708	dopr_unit(i) = 'kg/kgs'
2709	hom(:,2,82,:) = SPREAD( zu, 2, statistic_regions+1 )
2710	ENDIF
2711
2712	CASE ( 'td_sub_lpt' )
2713	IF ( .NOT. large_scale_forcing ) THEN
2714	message_string = 'data_output_pr = ' // &
2715	TRIM( data_output_pr(i) ) // ' is not imp' // &
2716	'lemented for large_scale_forcing = .FALSE.'
2717	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
2718	ELSE
2719	dopr_index(i) = 83
2720	dopr_unit(i) = 'K/s'
2721	hom(:,2,83,:) = SPREAD( zu, 2, statistic_regions+1 )
2722	ENDIF
2723
2724	CASE ( 'td_sub_q' )
2725	IF ( .NOT. large_scale_forcing ) THEN
2726	message_string = 'data_output_pr = ' // &
2727	TRIM( data_output_pr(i) ) // ' is not imp' // &
2728	'lemented for large_scale_forcing = .FALSE.'
2729	CALL message( 'check_parameters', 'PA0393', 1, 2, 0, 6, 0 )
2730	ELSE
2731	dopr_index(i) = 84
2732	dopr_unit(i) = 'kg/kgs'
2733	hom(:,2,84,:) = SPREAD( zu, 2, statistic_regions+1 )
2734	ENDIF
2735
2736	CASE ( 'td_nud_lpt' )
2737	IF ( .NOT. nudging ) THEN
2738	message_string = 'data_output_pr = ' // &
2739	TRIM( data_output_pr(i) ) // ' is not imp' // &
2740	'lemented for nudging = .FALSE.'
2741	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
2742	ELSE
2743	dopr_index(i) = 85
2744	dopr_unit(i) = 'K/s'
2745	hom(:,2,85,:) = SPREAD( zu, 2, statistic_regions+1 )
2746	ENDIF
2747
2748	CASE ( 'td_nud_q' )
2749	IF ( .NOT. nudging ) THEN
2750	message_string = 'data_output_pr = ' // &
2751	TRIM( data_output_pr(i) ) // ' is not imp' // &
2752	'lemented for nudging = .FALSE.'
2753	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
2754	ELSE
2755	dopr_index(i) = 86
2756	dopr_unit(i) = 'kg/kgs'
2757	hom(:,2,86,:) = SPREAD( zu, 2, statistic_regions+1 )
2758	ENDIF
2759
2760	CASE ( 'td_nud_u' )
2761	IF ( .NOT. nudging ) THEN
2762	message_string = 'data_output_pr = ' // &
2763	TRIM( data_output_pr(i) ) // ' is not imp' // &
2764	'lemented for nudging = .FALSE.'
2765	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
2766	ELSE
2767	dopr_index(i) = 87
2768	dopr_unit(i) = 'm/s2'
2769	hom(:,2,87,:) = SPREAD( zu, 2, statistic_regions+1 )
2770	ENDIF
2771
2772	CASE ( 'td_nud_v' )
2773	IF ( .NOT. nudging ) THEN
2774	message_string = 'data_output_pr = ' // &
2775	TRIM( data_output_pr(i) ) // ' is not imp' // &
2776	'lemented for nudging = .FALSE.'
2777	CALL message( 'check_parameters', 'PA0394', 1, 2, 0, 6, 0 )
2778	ELSE
2779	dopr_index(i) = 88
2780	dopr_unit(i) = 'm/s2'
2781	hom(:,2,88,:) = SPREAD( zu, 2, statistic_regions+1 )
2782	ENDIF
2783
2784
2785	CASE DEFAULT
2786
2787	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2788
2789	IF ( unit == 'illegal' ) THEN
2790	IF ( data_output_pr_user(1) /= ' ' ) THEN
2791	message_string = 'illegal value for data_output_pr or ' // &
2792	'data_output_pr_user = "' // &
2793	TRIM( data_output_pr(i) ) // '"'
2794	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2795	ELSE
2796	message_string = 'illegal value for data_output_pr = "' // &
2797	TRIM( data_output_pr(i) ) // '"'
2798	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2799	ENDIF
2800	ENDIF
2801
2802	END SELECT
2803
2804	ENDDO
2805
2806
2807	!
2808	!-- Append user-defined data output variables to the standard data output
2809	IF ( data_output_user(1) /= ' ' ) THEN
2810	i = 1
2811	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2812	i = i + 1
2813	ENDDO
2814	j = 1
2815	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2816	IF ( i > 100 ) THEN
2817	message_string = 'number of output quantitities given by data' // &
2818	'_output and data_output_user exceeds the limit of 100'
2819	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2820	ENDIF
2821	data_output(i) = data_output_user(j)
2822	i = i + 1
2823	j = j + 1
2824	ENDDO
2825	ENDIF
2826
2827	!
2828	!-- Check and set steering parameters for 2d/3d data output and averaging
2829	i = 1
2830	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2831	!
2832	!-- Check for data averaging
2833	ilen = LEN_TRIM( data_output(i) )
2834	j = 0 ! no data averaging
2835	IF ( ilen > 3 ) THEN
2836	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2837	j = 1 ! data averaging
2838	data_output(i) = data_output(i)(1:ilen-3)
2839	ENDIF
2840	ENDIF
2841	!
2842	!-- Check for cross section or volume data
2843	ilen = LEN_TRIM( data_output(i) )
2844	k = 0 ! 3d data
2845	var = data_output(i)(1:ilen)
2846	IF ( ilen > 3 ) THEN
2847	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2848	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2849	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2850	k = 1 ! 2d data
2851	var = data_output(i)(1:ilen-3)
2852	ENDIF
2853	ENDIF
2854	!
2855	!-- Check for allowed value and set units
2856	SELECT CASE ( TRIM( var ) )
2857
2858	CASE ( 'e' )
2859	IF ( constant_diffusion ) THEN
2860	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2861	'res constant_diffusion = .FALSE.'
2862	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2863	ENDIF
2864	unit = 'm2/s2'
2865
2866	CASE ( 'lpt' )
2867	IF ( .NOT. cloud_physics ) THEN
2868	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2869	'res cloud_physics = .TRUE.'
2870	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2871	ENDIF
2872	unit = 'K'
2873
2874	CASE ( 'nr' )
2875	IF ( .NOT. cloud_physics ) THEN
2876	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2877	'res cloud_physics = .TRUE.'
2878	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2879	ELSEIF ( icloud_scheme /= 0 ) THEN
2880	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2881	'res cloud_scheme = seifert_beheng'
2882	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2883	ENDIF
2884	unit = '1/m3'
2885
2886	CASE ( 'pc', 'pr' )
2887	IF ( .NOT. particle_advection ) THEN
2888	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2889	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2890	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2891	ENDIF
2892	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2893	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2894
2895	CASE ( 'prr' )
2896	IF ( .NOT. cloud_physics ) THEN
2897	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2898	'res cloud_physics = .TRUE.'
2899	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2900	ELSEIF ( icloud_scheme /= 0 ) THEN
2901	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2902	'res cloud_scheme = seifert_beheng'
2903	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2904	ELSEIF ( .NOT. precipitation ) THEN
2905	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2906	'res precipitation = .TRUE.'
2907	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2908	ENDIF
2909	unit = 'kg/kg m/s'
2910
2911	CASE ( 'q', 'vpt' )
2912	IF ( .NOT. humidity ) THEN
2913	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2914	'res humidity = .TRUE.'
2915	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2916	ENDIF
2917	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2918	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2919
2920	CASE ( 'qc' )
2921	IF ( .NOT. cloud_physics ) THEN
2922	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2923	'res cloud_physics = .TRUE.'
2924	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2925	ELSEIF ( icloud_scheme /= 0 ) THEN
2926	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2927	'res cloud_scheme = seifert_beheng'
2928	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2929	ENDIF
2930	unit = 'kg/kg'
2931
2932	CASE ( 'ql' )
2933	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2934	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2935	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2936	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2937	ENDIF
2938	unit = 'kg/kg'
2939
2940	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2941	IF ( .NOT. cloud_droplets ) THEN
2942	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2943	'res cloud_droplets = .TRUE.'
2944	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2945	ENDIF
2946	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2947	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2948	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2949
2950	CASE ( 'qr' )
2951	IF ( .NOT. cloud_physics ) THEN
2952	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2953	'res cloud_physics = .TRUE.'
2954	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2955	ELSEIF ( icloud_scheme /= 0 ) THEN
2956	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2957	'res cloud_scheme = seifert_beheng'
2958	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2959	ELSEIF ( .NOT. precipitation ) THEN
2960	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2961	'res precipitation = .TRUE.'
2962	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2963	ENDIF
2964	unit = 'kg/kg'
2965
2966	CASE ( 'qv' )
2967	IF ( .NOT. cloud_physics ) THEN
2968	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2969	'res cloud_physics = .TRUE.'
2970	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2971	ENDIF
2972	unit = 'kg/kg'
2973
2974	CASE ( 'rho' )
2975	IF ( .NOT. ocean ) THEN
2976	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2977	'res ocean = .TRUE.'
2978	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2979	ENDIF
2980	unit = 'kg/m3'
2981
2982	CASE ( 's' )
2983	IF ( .NOT. passive_scalar ) THEN
2984	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2985	'res passive_scalar = .TRUE.'
2986	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2987	ENDIF
2988	unit = 'conc'
2989
2990	CASE ( 'sa' )
2991	IF ( .NOT. ocean ) THEN
2992	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2993	'res ocean = .TRUE.'
2994	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2995	ENDIF
2996	unit = 'psu'
2997
2998	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2999	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
3000	message_string = 'illegal value for data_output: "' // &
3001	TRIM( var ) // '" & only 2d-horizontal ' // &
3002	'cross sections are allowed for this value'
3003	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
3004	ENDIF
3005	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
3006	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3007	'res cloud_physics = .TRUE.'
3008	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
3009	ENDIF
3010	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
3011	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3012	'res precipitation = .TRUE.'
3013	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
3014	ENDIF
3015	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
3016	message_string = 'temporal averaging of precipitation ' // &
3017	'amount "' // TRIM( var ) // '" is not possible'
3018	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
3019	ENDIF
3020	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
3021	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3022	'res precipitation = .TRUE.'
3023	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
3024	ENDIF
3025	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
3026	message_string = 'output of "' // TRIM( var ) // '" requi' // &
3027	'res humidity = .TRUE.'
3028	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
3029	ENDIF
3030
3031	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
3032	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
3033	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
3034	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
3035	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
3036	IF ( TRIM( var ) == 't*' ) unit = 'K'
3037	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
3038	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
3039	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
3040
3041
3042	CASE ( 'p', 'pt', 'u', 'v', 'w' )
3043	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
3044	IF ( TRIM( var ) == 'pt' ) unit = 'K'
3045	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
3046	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
3047	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
3048	CONTINUE
3049
3050	CASE DEFAULT
3051	CALL user_check_data_output( var, unit )
3052
3053	IF ( unit == 'illegal' ) THEN
3054	IF ( data_output_user(1) /= ' ' ) THEN
3055	message_string = 'illegal value for data_output or ' // &
3056	'data_output_user = "' // TRIM( data_output(i) ) // '"'
3057	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
3058	ELSE
3059	message_string = 'illegal value for data_output =' // &
3060	TRIM( data_output(i) ) // '"'
3061	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
3062	ENDIF
3063	ENDIF
3064
3065	END SELECT
3066	!
3067	!-- Set the internal steering parameters appropriately
3068	IF ( k == 0 ) THEN
3069	do3d_no(j) = do3d_no(j) + 1
3070	do3d(j,do3d_no(j)) = data_output(i)
3071	do3d_unit(j,do3d_no(j)) = unit
3072	ELSE
3073	do2d_no(j) = do2d_no(j) + 1
3074	do2d(j,do2d_no(j)) = data_output(i)
3075	do2d_unit(j,do2d_no(j)) = unit
3076	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
3077	data_output_xy(j) = .TRUE.
3078	ENDIF
3079	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
3080	data_output_xz(j) = .TRUE.
3081	ENDIF
3082	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3083	data_output_yz(j) = .TRUE.
3084	ENDIF
3085	ENDIF
3086
3087	IF ( j == 1 ) THEN
3088	!
3089	!-- Check, if variable is already subject to averaging
3090	found = .FALSE.
3091	DO k = 1, doav_n
3092	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
3093	ENDDO
3094
3095	IF ( .NOT. found ) THEN
3096	doav_n = doav_n + 1
3097	doav(doav_n) = var
3098	ENDIF
3099	ENDIF
3100
3101	i = i + 1
3102	ENDDO
3103
3104	!
3105	!-- Averaged 2d or 3d output requires that an averaging interval has been set
3106	IF ( doav_n > 0 .AND. averaging_interval == 0.0_wp ) THEN
3107	WRITE( message_string, * ) 'output of averaged quantity "', &
3108	TRIM( doav(1) ), '_av" requires to set a ', &
3109	'non-zero & averaging interval'
3110	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
3111	ENDIF
3112
3113	!
3114	!-- Check sectional planes and store them in one shared array
3115	IF ( ANY( section_xy > nz + 1 ) ) THEN
3116	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3117	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3118	ENDIF
3119	IF ( ANY( section_xz > ny + 1 ) ) THEN
3120	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3121	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3122	ENDIF
3123	IF ( ANY( section_yz > nx + 1 ) ) THEN
3124	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3125	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3126	ENDIF
3127	section(:,1) = section_xy
3128	section(:,2) = section_xz
3129	section(:,3) = section_yz
3130
3131	!
3132	!-- Upper plot limit for 2D vertical sections
3133	IF ( z_max_do2d == -1.0_wp ) z_max_do2d = zu(nzt)
3134	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3135	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3136	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3137	' (zu(nzt))'
3138	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3139	ENDIF
3140
3141	!
3142	!-- Upper plot limit for 3D arrays
3143	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3144
3145	!
3146	!-- Set output format string (used in header)
3147	SELECT CASE ( netcdf_data_format )
3148	CASE ( 1 )
3149	output_format_netcdf = 'netCDF classic'
3150	CASE ( 2 )
3151	output_format_netcdf = 'netCDF 64bit offset'
3152	CASE ( 3 )
3153	output_format_netcdf = 'netCDF4/HDF5'
3154	CASE ( 4 )
3155	output_format_netcdf = 'netCDF4/HDF5 classic'
3156	CASE ( 5 )
3157	output_format_netcdf = 'parallel netCDF4/HDF5'
3158	CASE ( 6 )
3159	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3160
3161	END SELECT
3162
3163	#if defined( __spectra )
3164	!
3165	!-- Check the number of spectra level to be output
3166	i = 1
3167	DO WHILE ( comp_spectra_level(i) /= 999999 .AND. i <= 100 )
3168	i = i + 1
3169	ENDDO
3170	i = i - 1
3171	IF ( i == 0 ) THEN
3172	WRITE( message_string, * ) 'no spectra levels given'
3173	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
3174	ENDIF
3175	#endif
3176
3177	!
3178	!-- Check mask conditions
3179	DO mid = 1, max_masks
3180	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3181	data_output_masks_user(mid,1) /= ' ' ) THEN
3182	masks = masks + 1
3183	ENDIF
3184	ENDDO
3185
3186	IF ( masks < 0 .OR. masks > max_masks ) THEN
3187	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3188	'<= ', max_masks, ' (=max_masks)'
3189	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3190	ENDIF
3191	IF ( masks > 0 ) THEN
3192	mask_scale(1) = mask_scale_x
3193	mask_scale(2) = mask_scale_y
3194	mask_scale(3) = mask_scale_z
3195	IF ( ANY( mask_scale <= 0.0_wp ) ) THEN
3196	WRITE( message_string, * ) &
3197	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3198	'must be > 0.0'
3199	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3200	ENDIF
3201	!
3202	!-- Generate masks for masked data output
3203	!-- Parallel netcdf output is not tested so far for masked data, hence
3204	!-- netcdf_data_format is switched back to non-paralell output.
3205	netcdf_data_format_save = netcdf_data_format
3206	IF ( netcdf_data_format > 4 ) THEN
3207	IF ( netcdf_data_format == 5 ) netcdf_data_format = 3
3208	IF ( netcdf_data_format == 6 ) netcdf_data_format = 4
3209	message_string = 'netCDF file formats '// &
3210	'5 (parallel netCDF 4) and ' // &
3211	'6 (parallel netCDF 4 Classic model) '// &
3212	'&are currently not supported (not yet tested) ' // &
3213	'for masked data.&Using respective non-parallel' // &
3214	' output for masked data.'
3215	CALL message( 'check_parameters', 'PA0383', 0, 0, 0, 6, 0 )
3216	ENDIF
3217	CALL init_masks
3218	netcdf_data_format = netcdf_data_format_save
3219	ENDIF
3220
3221	!
3222	!-- Check the NetCDF data format
3223	#if ! defined ( __check )
3224	IF ( netcdf_data_format > 2 ) THEN
3225	#if defined( __netcdf4 )
3226	CONTINUE
3227	#else
3228	message_string = 'netCDF: netCDF4 format requested but no ' // &
3229	'cpp-directive __netcdf4 given & switch ' // &
3230	'back to 64-bit offset format'
3231	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3232	netcdf_data_format = 2
3233	#endif
3234	ENDIF
3235	IF ( netcdf_data_format > 4 ) THEN
3236	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3237	CONTINUE
3238	#else
3239	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3240	'cpp-directive __netcdf4_parallel given & switch ' // &
3241	'back to netCDF4 non-parallel output'
3242	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3243	netcdf_data_format = netcdf_data_format - 2
3244	#endif
3245	ENDIF
3246	#endif
3247
3248	!
3249	!-- Calculate fixed number of output time levels for parallel netcdf output.
3250	!-- The time dimension has to be defined as limited for parallel output,
3251	!-- because otherwise the I/O performance drops significantly.
3252	IF ( netcdf_data_format > 4 ) THEN
3253
3254	ntdim_3d(0) = INT( ( end_time - skip_time_do3d ) / dt_do3d )
3255	IF ( do3d_at_begin ) ntdim_3d(0) = ntdim_3d(0) + 1
3256	ntdim_3d(1) = INT( ( end_time - skip_time_data_output_av ) &
3257	/ dt_data_output_av )
3258	ntdim_2d_xy(0) = INT( ( end_time - skip_time_do2d_xy ) / dt_do2d_xy )
3259	ntdim_2d_xz(0) = INT( ( end_time - skip_time_do2d_xz ) / dt_do2d_xz )
3260	ntdim_2d_yz(0) = INT( ( end_time - skip_time_do2d_yz ) / dt_do2d_yz )
3261	IF ( do2d_at_begin ) THEN
3262	ntdim_2d_xy(0) = ntdim_2d_xy(0) + 1
3263	ntdim_2d_xz(0) = ntdim_2d_xz(0) + 1
3264	ntdim_2d_yz(0) = ntdim_2d_yz(0) + 1
3265	ENDIF
3266	ntdim_2d_xy(1) = ntdim_3d(1)
3267	ntdim_2d_xz(1) = ntdim_3d(1)
3268	ntdim_2d_yz(1) = ntdim_3d(1)
3269
3270	ENDIF
3271
3272	#if ! defined( __check )
3273	!
3274	!-- Check netcdf precison
3275	ldum = .FALSE.
3276	CALL define_netcdf_header( 'ch', ldum, 0 )
3277	#endif
3278	!
3279	!-- Check, whether a constant diffusion coefficient shall be used
3280	IF ( km_constant /= -1.0_wp ) THEN
3281	IF ( km_constant < 0.0_wp ) THEN
3282	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3283	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3284	ELSE
3285	IF ( prandtl_number < 0.0_wp ) THEN
3286	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3287	' < 0.0'
3288	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3289	ENDIF
3290	constant_diffusion = .TRUE.
3291
3292	IF ( prandtl_layer ) THEN
3293	message_string = 'prandtl_layer is not allowed with fixed ' // &
3294	'value of km'
3295	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3296	ENDIF
3297	ENDIF
3298	ENDIF
3299
3300	!
3301	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3302	!-- potential temperature, check the width of the damping layer
3303	IF ( bc_lr /= 'cyclic' ) THEN
3304	IF ( pt_damping_width < 0.0_wp .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3305	message_string = 'pt_damping_width out of range'
3306	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3307	ENDIF
3308	ENDIF
3309
3310	IF ( bc_ns /= 'cyclic' ) THEN
3311	IF ( pt_damping_width < 0.0_wp .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3312	message_string = 'pt_damping_width out of range'
3313	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3314	ENDIF
3315	ENDIF
3316
3317	!
3318	!-- Check value range for rif
3319	IF ( rif_min >= rif_max ) THEN
3320	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3321	'than rif_max = ', rif_max
3322	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3323	ENDIF
3324
3325	!
3326	!-- Determine upper and lower hight level indices for random perturbations
3327	IF ( disturbance_level_b == -9999999.9_wp ) THEN
3328	IF ( ocean ) THEN
3329	disturbance_level_b = zu((nzt*2)/3)
3330	disturbance_level_ind_b = ( nzt * 2 ) / 3
3331	ELSE
3332	disturbance_level_b = zu(nzb+3)
3333	disturbance_level_ind_b = nzb + 3
3334	ENDIF
3335	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3336	WRITE( message_string, * ) 'disturbance_level_b = ', &
3337	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3338	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3339	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3340	WRITE( message_string, * ) 'disturbance_level_b = ', &
3341	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3342	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3343	ELSE
3344	DO k = 3, nzt-2
3345	IF ( disturbance_level_b <= zu(k) ) THEN
3346	disturbance_level_ind_b = k
3347	EXIT
3348	ENDIF
3349	ENDDO
3350	ENDIF
3351
3352	IF ( disturbance_level_t == -9999999.9_wp ) THEN
3353	IF ( ocean ) THEN
3354	disturbance_level_t = zu(nzt-3)
3355	disturbance_level_ind_t = nzt - 3
3356	ELSE
3357	disturbance_level_t = zu(nzt/3)
3358	disturbance_level_ind_t = nzt / 3
3359	ENDIF
3360	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3361	WRITE( message_string, * ) 'disturbance_level_t = ', &
3362	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3363	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3364	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3365	WRITE( message_string, * ) 'disturbance_level_t = ', &
3366	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3367	disturbance_level_b
3368	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3369	ELSE
3370	DO k = 3, nzt-2
3371	IF ( disturbance_level_t <= zu(k) ) THEN
3372	disturbance_level_ind_t = k
3373	EXIT
3374	ENDIF
3375	ENDDO
3376	ENDIF
3377
3378	!
3379	!-- Check again whether the levels determined this way are ok.
3380	!-- Error may occur at automatic determination and too few grid points in
3381	!-- z-direction.
3382	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3383	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3384	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3385	disturbance_level_b
3386	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3387	ENDIF
3388
3389	!
3390	!-- Determine the horizontal index range for random perturbations.
3391	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3392	!-- near the inflow and the perturbation area is further limited to ...(1)
3393	!-- after the initial phase of the flow.
3394	dist_nxl = 0; dist_nxr = nx
3395	dist_nys = 0; dist_nyn = ny
3396	IF ( bc_lr /= 'cyclic' ) THEN
3397	IF ( inflow_disturbance_begin == -1 ) THEN
3398	inflow_disturbance_begin = MIN( 10, nx/2 )
3399	ENDIF
3400	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3401	THEN
3402	message_string = 'inflow_disturbance_begin out of range'
3403	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3404	ENDIF
3405	IF ( inflow_disturbance_end == -1 ) THEN
3406	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3407	ENDIF
3408	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3409	THEN
3410	message_string = 'inflow_disturbance_end out of range'
3411	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3412	ENDIF
3413	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3414	IF ( inflow_disturbance_begin == -1 ) THEN
3415	inflow_disturbance_begin = MIN( 10, ny/2 )
3416	ENDIF
3417	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3418	THEN
3419	message_string = 'inflow_disturbance_begin out of range'
3420	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3421	ENDIF
3422	IF ( inflow_disturbance_end == -1 ) THEN
3423	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3424	ENDIF
3425	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3426	THEN
3427	message_string = 'inflow_disturbance_end out of range'
3428	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3429	ENDIF
3430	ENDIF
3431
3432	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3433	dist_nxr = nx - inflow_disturbance_begin
3434	dist_nxl(1) = nx - inflow_disturbance_end
3435	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3436	dist_nxl = inflow_disturbance_begin
3437	dist_nxr(1) = inflow_disturbance_end
3438	ENDIF
3439	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3440	dist_nyn = ny - inflow_disturbance_begin
3441	dist_nys(1) = ny - inflow_disturbance_end
3442	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3443	dist_nys = inflow_disturbance_begin
3444	dist_nyn(1) = inflow_disturbance_end
3445	ENDIF
3446
3447	!
3448	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3449	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3450	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3451	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3452	'condition at the inflow boundary'
3453	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3454	ENDIF
3455
3456	!
3457	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3458	!-- data from prerun in the first main run
3459	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3460	initializing_actions /= 'read_restart_data' ) THEN
3461	message_string = 'turbulent_inflow = .T. requires ' // &
3462	'initializing_actions = ''cyclic_fill'' '
3463	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3464	ENDIF
3465
3466	!
3467	!-- In case of turbulent inflow calculate the index of the recycling plane
3468	IF ( turbulent_inflow ) THEN
3469	IF ( recycling_width == 9999999.9_wp ) THEN
3470	!
3471	!-- Set the default value for the width of the recycling domain
3472	recycling_width = 0.1_wp * nx * dx
3473	ELSE
3474	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3475	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3476	' ', recycling_width
3477	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3478	ENDIF
3479	ENDIF
3480	!
3481	!-- Calculate the index
3482	recycling_plane = recycling_width / dx
3483	ENDIF
3484
3485	!
3486	!-- Check random generator
3487	IF ( random_generator /= 'system-specific' .AND. &
3488	random_generator /= 'numerical-recipes' ) THEN
3489	message_string = 'unknown random generator: random_generator = "' // &
3490	TRIM( random_generator ) // '"'
3491	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3492	ENDIF
3493
3494	!
3495	!-- Determine damping level index for 1D model
3496	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3497	IF ( damp_level_1d == -1.0_wp ) THEN
3498	damp_level_1d = zu(nzt+1)
3499	damp_level_ind_1d = nzt + 1
3500	ELSEIF ( damp_level_1d < 0.0_wp .OR. damp_level_1d > zu(nzt+1) ) THEN
3501	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3502	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3503	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3504	ELSE
3505	DO k = 1, nzt+1
3506	IF ( damp_level_1d <= zu(k) ) THEN
3507	damp_level_ind_1d = k
3508	EXIT
3509	ENDIF
3510	ENDDO
3511	ENDIF
3512	ENDIF
3513
3514	!
3515	!-- Check some other 1d-model parameters
3516	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3517	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3518	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3519	'" is unknown'
3520	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3521	ENDIF
3522	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3523	TRIM( dissipation_1d ) /= 'detering' ) THEN
3524	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3525	'" is unknown'
3526	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3527	ENDIF
3528
3529	!
3530	!-- Set time for the next user defined restart (time_restart is the
3531	!-- internal parameter for steering restart events)
3532	IF ( restart_time /= 9999999.9_wp ) THEN
3533	IF ( restart_time > time_since_reference_point ) THEN
3534	time_restart = restart_time
3535	ENDIF
3536	ELSE
3537	!
3538	!-- In case of a restart run, set internal parameter to default (no restart)
3539	!-- if the NAMELIST-parameter restart_time is omitted
3540	time_restart = 9999999.9_wp
3541	ENDIF
3542
3543	!
3544	!-- Set default value of the time needed to terminate a model run
3545	IF ( termination_time_needed == -1.0_wp ) THEN
3546	IF ( host(1:3) == 'ibm' ) THEN
3547	termination_time_needed = 300.0_wp
3548	ELSE
3549	termination_time_needed = 35.0_wp
3550	ENDIF
3551	ENDIF
3552
3553	!
3554	!-- Check the time needed to terminate a model run
3555	IF ( host(1:3) == 't3e' ) THEN
3556	!
3557	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3558	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3559	IF ( termination_time_needed <= 30.0_wp ) THEN
3560	WRITE( message_string, * ) 'termination_time_needed = ', &
3561	termination_time_needed, ' must be > 30.0 on host "', &
3562	TRIM( host ), '"'
3563	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3564	ENDIF
3565	ELSEIF ( host(1:3) == 'ibm' ) THEN
3566	!
3567	!-- On IBM-regatta machines the time should be at least 300 seconds,
3568	!-- because the job time consumed before executing palm (for compiling,
3569	!-- copying of files, etc.) has to be regarded
3570	IF ( termination_time_needed < 300.0_wp ) THEN
3571	WRITE( message_string, * ) 'termination_time_needed = ', &
3572	termination_time_needed, ' should be >= 300.0 on host "', &
3573	TRIM( host ), '"'
3574	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3575	ENDIF
3576	ENDIF
3577
3578	!
3579	!-- Check pressure gradient conditions
3580	IF ( dp_external .AND. conserve_volume_flow ) THEN
3581	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3582	'w are .TRUE. but one of them must be .FALSE.'
3583	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3584	ENDIF
3585	IF ( dp_external ) THEN
3586	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3587	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3588	' of range'
3589	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3590	ENDIF
3591	IF ( .NOT. ANY( dpdxy /= 0.0_wp ) ) THEN
3592	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3593	'ro, i.e. the external pressure gradient & will not be applied'
3594	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3595	ENDIF
3596	ENDIF
3597	IF ( ANY( dpdxy /= 0.0_wp ) .AND. .NOT. dp_external ) THEN
3598	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3599	'.FALSE., i.e. the external pressure gradient & will not be applied'
3600	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3601	ENDIF
3602	IF ( conserve_volume_flow ) THEN
3603	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3604
3605	conserve_volume_flow_mode = 'initial_profiles'
3606
3607	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3608	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3609	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3610	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3611	conserve_volume_flow_mode
3612	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3613	ENDIF
3614	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3615	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3616	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3617	'require conserve_volume_flow_mode = ''initial_profiles'''
3618	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3619	ENDIF
3620	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3621	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3622	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3623	'require conserve_volume_flow_mode = ''initial_profiles''', &
3624	' or ''bulk_velocity'''
3625	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3626	ENDIF
3627	ENDIF
3628	IF ( ( u_bulk /= 0.0_wp .OR. v_bulk /= 0.0_wp ) .AND. &
3629	( .NOT. conserve_volume_flow .OR. &
3630	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3631	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3632	'conserve_volume_flow = .T. and ', &
3633	'conserve_volume_flow_mode = ''bulk_velocity'''
3634	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3635	ENDIF
3636
3637	!
3638	!-- Check particle attributes
3639	IF ( particle_color /= 'none' ) THEN
3640	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3641	particle_color /= 'z' ) THEN
3642	message_string = 'illegal value for parameter particle_color: ' // &
3643	TRIM( particle_color)
3644	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3645	ELSE
3646	IF ( color_interval(2) <= color_interval(1) ) THEN
3647	message_string = 'color_interval(2) <= color_interval(1)'
3648	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3649	ENDIF
3650	ENDIF
3651	ENDIF
3652
3653	IF ( particle_dvrpsize /= 'none' ) THEN
3654	IF ( particle_dvrpsize /= 'absw' ) THEN
3655	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3656	' ' // TRIM( particle_color)
3657	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3658	ELSE
3659	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3660	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3661	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3662	ENDIF
3663	ENDIF
3664	ENDIF
3665
3666	!
3667	!-- Check nudging and large scale forcing from external file
3668	IF ( nudging .AND. ( .NOT. large_scale_forcing ) ) THEN
3669	message_string = 'Nudging requires large_scale_forcing = .T.. &'// &
3670	'Surface fluxes and geostrophic wind should be &'// &
3671	'prescribed in file LSF_DATA'
3672	CALL message( 'check_parameters', 'PA0374', 1, 2, 0, 6, 0 )
3673	ENDIF
3674
3675	IF ( large_scale_forcing .AND. ( bc_lr /= 'cyclic' .OR. &
3676	bc_ns /= 'cyclic' ) ) THEN
3677	message_string = 'Non-cyclic lateral boundaries do not allow for &' // &
3678	'the usage of large scale forcing from external file.'
3679	CALL message( 'check_parameters', 'PA0375', 1, 2, 0, 6, 0 )
3680	ENDIF
3681
3682	IF ( large_scale_forcing .AND. ( .NOT. humidity ) ) THEN
3683	message_string = 'The usage of large scale forcing from external &'//&
3684	'file LSF_DATA requires humidity = .T..'
3685	CALL message( 'check_parameters', 'PA0376', 1, 2, 0, 6, 0 )
3686	ENDIF
3687
3688	IF ( large_scale_forcing .AND. topography /= 'flat' ) THEN
3689	message_string = 'The usage of large scale forcing from external &'//&
3690	'file LSF_DATA is not implemented for non-flat topography'
3691	CALL message( 'check_parameters', 'PA0377', 1, 2, 0, 6, 0 )
3692	ENDIF
3693
3694	IF ( large_scale_forcing .AND. ocean ) THEN
3695	message_string = 'The usage of large scale forcing from external &'//&
3696	'file LSF_DATA is not implemented for ocean runs'
3697	CALL message( 'check_parameters', 'PA0378', 1, 2, 0, 6, 0 )
3698	ENDIF
3699
3700	CALL location_message( 'finished' )
3701
3702	!
3703	!-- Check &userpar parameters
3704	CALL user_check_parameters
3705
3706
3707	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |