Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1295

Last change on this file since 1295 was 1277, checked in by heinze, 11 years ago
Last commit documented
Property svn:keywords set to `Id`
File size: 143.9 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1277 2014-01-15 13:43:45Z raasch $
27	!
28	! 1276 2014-01-15 13:40:41Z heinze
29	! Use LSF_DATA also in case of Dirichlet bottom boundary condition for scalars
30	!
31	! 1241 2013-10-30 11:36:58Z heinze
32	! output for profiles of ug and vg added
33	! set surface_heatflux and surface_waterflux also in dependence on
34	! large_scale_forcing
35	! checks for nudging and large scale forcing from external file
36	!
37	! 1236 2013-09-27 07:21:13Z raasch
38	! check number of spectra levels
39	!
40	! 1216 2013-08-26 09:31:42Z raasch
41	! check for transpose_compute_overlap (temporary)
42	!
43	! 1214 2013-08-21 12:29:17Z kanani
44	! additional check for simultaneous use of vertical grid stretching
45	! and particle advection
46	!
47	! 1212 2013-08-15 08:46:27Z raasch
48	! checks for poisfft_hybrid removed
49	!
50	! 1210 2013-08-14 10:58:20Z raasch
51	! check for fftw
52	!
53	! 1179 2013-06-14 05:57:58Z raasch
54	! checks and settings of buoyancy parameters and switches revised,
55	! initial profile for rho added to hom (id=77)
56	!
57	! 1174 2013-05-31 10:28:08Z gryschka
58	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
59	!
60	! 1159 2013-05-21 11:58:22Z fricke
61	! bc_lr/ns_dirneu/neudir removed
62	!
63	! 1115 2013-03-26 18:16:16Z hoffmann
64	! unused variables removed
65	! drizzle can be used without precipitation
66	!
67	! 1111 2013-03-08 23:54:10Z raasch
68	! ibc_p_b = 2 removed
69	!
70	! 1103 2013-02-20 02:15:53Z raasch
71	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
72	!
73	! 1092 2013-02-02 11:24:22Z raasch
74	! unused variables removed
75	!
76	! 1069 2012-11-28 16:18:43Z maronga
77	! allow usage of topography in combination with cloud physics
78	!
79	! 1065 2012-11-22 17:42:36Z hoffmann
80	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
81	! precipitation in order to save computational resources.
82	!
83	! 1060 2012-11-21 07:19:51Z raasch
84	! additional check for parameter turbulent_inflow
85	!
86	! 1053 2012-11-13 17:11:03Z hoffmann
87	! necessary changes for the new two-moment cloud physics scheme added:
88	! - check cloud physics scheme (Kessler or Seifert and Beheng)
89	! - plant_canopy is not allowed
90	! - currently, only cache loop_optimization is allowed
91	! - initial profiles of nr, qr
92	! - boundary condition of nr, qr
93	! - check output quantities (qr, nr, prr)
94	!
95	! 1036 2012-10-22 13:43:42Z raasch
96	! code put under GPL (PALM 3.9)
97	!
98	! 1031/1034 2012-10-22 11:32:49Z raasch
99	! check of netcdf4 parallel file support
100	!
101	! 1019 2012-09-28 06:46:45Z raasch
102	! non-optimized version of prognostic_equations not allowed any more
103	!
104	! 1015 2012-09-27 09:23:24Z raasch
105	! acc allowed for loop optimization,
106	! checks for adjustment of mixing length to the Prandtl mixing length removed
107	!
108	! 1003 2012-09-14 14:35:53Z raasch
109	! checks for cases with unequal subdomain sizes removed
110	!
111	! 1001 2012-09-13 14:08:46Z raasch
112	! all actions concerning leapfrog- and upstream-spline-scheme removed
113	!
114	! 996 2012-09-07 10:41:47Z raasch
115	! little reformatting
116
117	! 978 2012-08-09 08:28:32Z fricke
118	! setting of bc_lr/ns_dirneu/neudir
119	! outflow damping layer removed
120	! check for z0h*
121	! check for pt_damping_width
122	!
123	! 964 2012-07-26 09:14:24Z raasch
124	! check of old profil-parameters removed
125	!
126	! 940 2012-07-09 14:31:00Z raasch
127	! checks for parameter neutral
128	!
129	! 924 2012-06-06 07:44:41Z maronga
130	! Bugfix: preprocessor directives caused error during compilation
131	!
132	! 892 2012-05-02 13:51:44Z maronga
133	! Bugfix for parameter file check ( excluding __netcdf4 )
134	!
135	! 866 2012-03-28 06:44:41Z raasch
136	! use only 60% of the geostrophic wind as translation speed in case of Galilean
137	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
138	! timestep
139	!
140	! 861 2012-03-26 14:18:34Z suehring
141	! Check for topography and ws-scheme removed.
142	! Check for loop_optimization = 'vector' and ws-scheme removed.
143	!
144	! 845 2012-03-07 10:23:05Z maronga
145	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
146	!
147	! 828 2012-02-21 12:00:36Z raasch
148	! check of collision_kernel extended
149	!
150	! 825 2012-02-19 03:03:44Z raasch
151	! check for collision_kernel and curvature_solution_effects
152	!
153	! 809 2012-01-30 13:32:58Z maronga
154	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
155	!
156	! 807 2012-01-25 11:53:51Z maronga
157	! New cpp directive "__check" implemented which is used by check_namelist_files
158	!
159	! 774 2011-10-27 13:34:16Z letzel
160	! bugfix for prescribed u,v-profiles
161	!
162	! 767 2011-10-14 06:39:12Z raasch
163	! Calculating u,v-profiles from given profiles by linear interpolation.
164	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
165	!
166	! 707 2011-03-29 11:39:40Z raasch
167	! setting of bc_lr/ns_dirrad/raddir
168	!
169	! 689 2011-02-20 19:31:12z gryschka
170	! Bugfix for some logical expressions
171	! (syntax was not compatible with all compilers)
172	!
173	! 680 2011-02-04 23:16:06Z gryschka
174	! init_vortex is not allowed with volume_flow_control
175	!
176	! 673 2011-01-18 16:19:48Z suehring
177	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
178	!
179	! 667 2010-12-23 12:06:00Z suehring/gryschka
180	! Exchange of parameters between ocean and atmosphere via PE0
181	! Check for illegal combination of ws-scheme and timestep scheme.
182	! Check for topography and ws-scheme.
183	! Check for not cyclic boundary conditions in combination with ws-scheme and
184	! loop_optimization = 'vector'.
185	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
186	! Different processor/grid topology in atmosphere and ocean is now allowed!
187	! Bugfixes in checking for conserve_volume_flow_mode
188	! 600 2010-11-24 16:10:51Z raasch
189	! change due to new default value of surface_waterflux
190	! 580 2010-10-05 13:59:11Z heinze
191	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
192	!
193	! 567 2010-10-01 10:46:30Z helmke
194	! calculating masks changed
195	!
196	! 564 2010-09-30 13:18:59Z helmke
197	! palm message identifiers of masked output changed, 20 replaced by max_masks
198	!
199	! 553 2010-09-01 14:09:06Z weinreis
200	! masks is calculated and removed from inipar
201	!
202	! 531 2010-04-21 06:47:21Z heinze
203	! Bugfix: unit of hyp changed to dbar
204	!
205	! 524 2010-03-30 02:04:51Z raasch
206	! Bugfix: "/" in netcdf profile variable names replaced by ":"
207	!
208	! 493 2010-03-01 08:30:24Z raasch
209	! netcdf_data_format is checked
210	!
211	! 411 2009-12-11 14:15:58Z heinze
212	! Enabled passive scalar/humidity wall fluxes for non-flat topography
213	! Initialization of large scale vertical motion (subsidence/ascent)
214	!
215	! 410 2009-12-04 17:05:40Z letzel
216	! masked data output
217	!
218	! 388 2009-09-23 09:40:33Z raasch
219	! Check profiles fpr prho and hyp.
220	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
221	! interval has been set, respective error message is included
222	! bc_lr_cyc and bc_ns_cyc are set,
223	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
224	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
225	! Coupling with independent precursor runs.
226	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
227	! Bugfix: pressure included for profile output
228	! Check pressure gradient conditions
229	! topography_grid_convention moved from user_check_parameters
230	! 'single_street_canyon'
231	! Added shf* and qsws* to the list of available output data
232	!
233	! 222 2009-01-12 16:04:16Z letzel
234	! +user_check_parameters
235	! Output of messages replaced by message handling routine.
236	! Implementation of an MPI-1 coupling: replaced myid with target_id,
237	! deleted __mpi2 directives
238	! Check that PALM is called with mrun -K parallel for coupling
239	!
240	! 197 2008-09-16 15:29:03Z raasch
241	! Bug fix: Construction of vertical profiles when 10 gradients have been
242	! specified in the parameter list (ug, vg, pt, q, sa, lad)
243	!
244	! Strict grid matching along z is not needed for mg-solver.
245	! Leaf area density (LAD) explicitly set to its surface value at k=0
246	! Case of reading data for recycling included in initializing_actions,
247	! check of turbulent_inflow and calculation of recycling_plane.
248	! q*2 profile added
249	!
250	! 138 2007-11-28 10:03:58Z letzel
251	! Plant canopy added
252	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
253	! Multigrid solver allows topography, checking of dt_sort_particles
254	! Bugfix: initializing u_init and v_init in case of ocean runs
255	!
256	! 109 2007-08-28 15:26:47Z letzel
257	! Check coupling_mode and set default (obligatory) values (like boundary
258	! conditions for temperature and fluxes) in case of coupled runs.
259	! +profiles for wp and w"e
260	! Bugfix: Error message concerning output of particle concentration (pc)
261	! modified
262	! More checks and more default values for coupled runs
263	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
264	! cloud_physics = .T.)
265	! Rayleigh damping for ocean fixed.
266	! Check and, if necessary, set default value for dt_coupling
267	!
268	! 97 2007-06-21 08:23:15Z raasch
269	! Initial salinity profile is calculated, salinity boundary conditions are
270	! checked,
271	! z_max_do1d is checked only in case of ocean = .f.,
272	! +initial temperature and geostrophic velocity profiles for the ocean version,
273	! use_pt_reference renamed use_reference
274	!
275	! 89 2007-05-25 12:08:31Z raasch
276	! Check for user-defined profiles
277	!
278	! 75 2007-03-22 09:54:05Z raasch
279	! "by_user" allowed as initializing action, -data_output_ts,
280	! leapfrog with non-flat topography not allowed any more, loop_optimization
281	! and pt_reference are checked, moisture renamed humidity,
282	! output of precipitation amount/rate and roughnes length + check
283	! possible negative humidities are avoided in initial profile,
284	! dirichlet/neumann changed to dirichlet/radiation, etc.,
285	! revision added to run_description_header
286	!
287	! 20 2007-02-26 00:12:32Z raasch
288	! Temperature and humidity gradients at top are now calculated for nzt+1,
289	! top_heatflux and respective boundary condition bc_pt_t is checked
290	!
291	! RCS Log replace by Id keyword, revision history cleaned up
292	!
293	! Revision 1.61 2006/08/04 14:20:25 raasch
294	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
295	! use_upstream_for_tke, default value for dt_dopts,
296	! generation of file header moved from routines palm and header to here
297	!
298	! Revision 1.1 1997/08/26 06:29:23 raasch
299	! Initial revision
300	!
301	!
302	! Description:
303	! ------------
304	! Check control parameters and deduce further quantities.
305	!------------------------------------------------------------------------------!
306
307	USE arrays_3d
308	USE cloud_parameters
309	USE constants
310	USE control_parameters
311	USE dvrp_variables
312	USE grid_variables
313	USE indices
314	USE model_1d
315	USE netcdf_control
316	USE particle_attributes
317	USE pegrid
318	USE profil_parameter
319	USE spectrum
320	USE statistics
321	USE subsidence_mod
322	USE statistics
323	USE transpose_indices
324
325	IMPLICIT NONE
326
327	CHARACTER (LEN=1) :: sq
328	CHARACTER (LEN=6) :: var
329	CHARACTER (LEN=7) :: unit
330	CHARACTER (LEN=8) :: date
331	CHARACTER (LEN=10) :: time
332	CHARACTER (LEN=40) :: coupling_string
333	CHARACTER (LEN=100) :: action
334
335	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
336	LOGICAL :: found, ldum
337	REAL :: gradient, remote = 0.0, simulation_time_since_reference
338
339	!
340	!-- Check for overlap combinations, which are not realized yet
341	IF ( transpose_compute_overlap ) THEN
342	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
343	#if defined( __openacc )
344	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
345	#endif
346	ENDIF
347
348	!
349	!-- Warning, if host is not set
350	IF ( host(1:1) == ' ' ) THEN
351	message_string = '"host" is not set. Please check that environment ' // &
352	'variable "localhost" & is set before running PALM'
353	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
354	ENDIF
355
356	!
357	!-- Check the coupling mode
358	IF ( coupling_mode /= 'uncoupled' .AND. &
359	coupling_mode /= 'atmosphere_to_ocean' .AND. &
360	coupling_mode /= 'ocean_to_atmosphere' ) THEN
361	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
362	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
363	ENDIF
364
365	!
366	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
367	IF ( coupling_mode /= 'uncoupled') THEN
368
369	IF ( dt_coupling == 9999999.9 ) THEN
370	message_string = 'dt_coupling is not set but required for coup' // &
371	'ling mode "' // TRIM( coupling_mode ) // '"'
372	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
373	ENDIF
374
375	#if defined( __parallel )
376
377	!
378	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
379	!-- program.
380	!-- check_namelist_files will need the following information of the other
381	!-- model (atmosphere/ocean).
382	! dt_coupling = remote
383	! dt_max = remote
384	! restart_time = remote
385	! dt_restart= remote
386	! simulation_time_since_reference = remote
387	! dx = remote
388
389
390	#if ! defined( __check )
391	IF ( myid == 0 ) THEN
392	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
393	ierr )
394	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
395	status, ierr )
396	ENDIF
397	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
398	#endif
399	IF ( dt_coupling /= remote ) THEN
400	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
401	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
402	'dt_coupling_remote = ', remote
403	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
404	ENDIF
405	IF ( dt_coupling <= 0.0 ) THEN
406	#if ! defined( __check )
407	IF ( myid == 0 ) THEN
408	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
409	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
410	status, ierr )
411	ENDIF
412	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
413	#endif
414	dt_coupling = MAX( dt_max, remote )
415	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
416	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
417	'MAX(dt_max(A,O)) = ', dt_coupling
418	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
419	ENDIF
420	#if ! defined( __check )
421	IF ( myid == 0 ) THEN
422	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
423	ierr )
424	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
425	status, ierr )
426	ENDIF
427	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
428	#endif
429	IF ( restart_time /= remote ) THEN
430	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
431	'": restart_time = ', restart_time, '& is not equal to ', &
432	'restart_time_remote = ', remote
433	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
434	ENDIF
435	#if ! defined( __check )
436	IF ( myid == 0 ) THEN
437	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
438	ierr )
439	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
440	status, ierr )
441	ENDIF
442	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
443	#endif
444	IF ( dt_restart /= remote ) THEN
445	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
446	'": dt_restart = ', dt_restart, '& is not equal to ', &
447	'dt_restart_remote = ', remote
448	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
449	ENDIF
450
451	simulation_time_since_reference = end_time - coupling_start_time
452	#if ! defined( __check )
453	IF ( myid == 0 ) THEN
454	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
455	14, comm_inter, ierr )
456	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
457	status, ierr )
458	ENDIF
459	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
460	#endif
461	IF ( simulation_time_since_reference /= remote ) THEN
462	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
463	'": simulation_time_since_reference = ', &
464	simulation_time_since_reference, '& is not equal to ', &
465	'simulation_time_since_reference_remote = ', remote
466	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
467	ENDIF
468
469	#if ! defined( __check )
470	IF ( myid == 0 ) THEN
471	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
472	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
473	status, ierr )
474	ENDIF
475	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
476
477	#endif
478	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
479
480	IF ( dx < remote ) THEN
481	WRITE( message_string, * ) 'coupling mode "', &
482	TRIM( coupling_mode ), &
483	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
484	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
485	ENDIF
486
487	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
488	WRITE( message_string, * ) 'coupling mode "', &
489	TRIM( coupling_mode ), &
490	'": Domain size in x-direction is not equal in ocean and atmosphere'
491	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
492	ENDIF
493
494	ENDIF
495
496	#if ! defined( __check )
497	IF ( myid == 0) THEN
498	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
499	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
500	status, ierr )
501	ENDIF
502	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
503	#endif
504	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
505
506	IF ( dy < remote ) THEN
507	WRITE( message_string, * ) 'coupling mode "', &
508	TRIM( coupling_mode ), &
509	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
510	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
511	ENDIF
512
513	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
514	WRITE( message_string, * ) 'coupling mode "', &
515	TRIM( coupling_mode ), &
516	'": Domain size in y-direction is not equal in ocean and atmosphere'
517	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
518	ENDIF
519
520	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
521	WRITE( message_string, * ) 'coupling mode "', &
522	TRIM( coupling_mode ), &
523	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
524	' atmosphere'
525	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
526	ENDIF
527
528	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
529	WRITE( message_string, * ) 'coupling mode "', &
530	TRIM( coupling_mode ), &
531	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
532	' atmosphere'
533	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
534	ENDIF
535
536	ENDIF
537	#else
538	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
539	' ''mrun -K parallel'''
540	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
541	#endif
542	ENDIF
543
544	#if defined( __parallel ) && ! defined ( __check )
545	!
546	!-- Exchange via intercommunicator
547	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
548	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
549	ierr )
550	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
551	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
552	comm_inter, status, ierr )
553	ENDIF
554	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
555
556	#endif
557
558
559	!
560	!-- Generate the file header which is used as a header for most of PALM's
561	!-- output files
562	CALL DATE_AND_TIME( date, time )
563	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
564	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
565	IF ( coupling_mode == 'uncoupled' ) THEN
566	coupling_string = ''
567	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
568	coupling_string = ' coupled (atmosphere)'
569	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
570	coupling_string = ' coupled (ocean)'
571	ENDIF
572
573	WRITE ( run_description_header, &
574	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
575	TRIM( version ), TRIM( revision ), 'run: ', &
576	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
577	'host: ', TRIM( host ), run_date, run_time
578
579	!
580	!-- Check the general loop optimization method
581	IF ( loop_optimization == 'default' ) THEN
582	IF ( host(1:3) == 'nec' ) THEN
583	loop_optimization = 'vector'
584	ELSE
585	loop_optimization = 'cache'
586	ENDIF
587	ENDIF
588
589	SELECT CASE ( TRIM( loop_optimization ) )
590
591	CASE ( 'acc', 'cache', 'vector' )
592	CONTINUE
593
594	CASE DEFAULT
595	message_string = 'illegal value given for loop_optimization: "' // &
596	TRIM( loop_optimization ) // '"'
597	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
598
599	END SELECT
600
601	!
602	!-- Check if vertical grid stretching is used together with particles
603	IF ( dz_stretch_level < 100000.0 .AND. particle_advection ) THEN
604	message_string = 'Vertical grid stretching is not allowed together ' // &
605	'with particle advection.'
606	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
607	ENDIF
608
609	!
610	!-- Check topography setting (check for illegal parameter combinations)
611	IF ( topography /= 'flat' ) THEN
612	action = ' '
613	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
614	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
615	ENDIF
616	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
617	THEN
618	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
619	ENDIF
620	IF ( psolver == 'sor' ) THEN
621	WRITE( action, '(A,A)' ) 'psolver = ', psolver
622	ENDIF
623	IF ( sloping_surface ) THEN
624	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
625	ENDIF
626	IF ( galilei_transformation ) THEN
627	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
628	ENDIF
629	IF ( cloud_physics ) THEN
630	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
631	ENDIF
632	IF ( cloud_droplets ) THEN
633	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
634	ENDIF
635	IF ( .NOT. prandtl_layer ) THEN
636	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
637	ENDIF
638	IF ( action /= ' ' ) THEN
639	message_string = 'a non-flat topography does not allow ' // &
640	TRIM( action )
641	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
642	ENDIF
643	!
644	!-- In case of non-flat topography, check whether the convention how to
645	!-- define the topography grid has been set correctly, or whether the default
646	!-- is applicable. If this is not possible, abort.
647	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
648	IF ( TRIM( topography ) /= 'single_building' .AND. &
649	TRIM( topography ) /= 'single_street_canyon' .AND. &
650	TRIM( topography ) /= 'read_from_file' ) THEN
651	!-- The default value is not applicable here, because it is only valid
652	!-- for the two standard cases 'single_building' and 'read_from_file'
653	!-- defined in init_grid.
654	WRITE( message_string, * ) &
655	'The value for "topography_grid_convention" ', &
656	'is not set. Its default value is & only valid for ', &
657	'"topography" = ''single_building'', ', &
658	'''single_street_canyon'' & or ''read_from_file''.', &
659	' & Choose ''cell_edge'' or ''cell_center''.'
660	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
661	ELSE
662	!-- The default value is applicable here.
663	!-- Set convention according to topography.
664	IF ( TRIM( topography ) == 'single_building' .OR. &
665	TRIM( topography ) == 'single_street_canyon' ) THEN
666	topography_grid_convention = 'cell_edge'
667	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
668	topography_grid_convention = 'cell_center'
669	ENDIF
670	ENDIF
671	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
672	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
673	WRITE( message_string, * ) &
674	'The value for "topography_grid_convention" is ', &
675	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
676	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
677	ENDIF
678
679	ENDIF
680
681	!
682	!-- Check ocean setting
683	IF ( ocean ) THEN
684
685	action = ' '
686	IF ( action /= ' ' ) THEN
687	message_string = 'ocean = .T. does not allow ' // TRIM( action )
688	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
689	ENDIF
690
691	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
692	TRIM( coupling_char ) == '_O' ) THEN
693
694	!
695	!-- Check whether an (uncoupled) atmospheric run has been declared as an
696	!-- ocean run (this setting is done via mrun-option -y)
697
698	message_string = 'ocean = .F. does not allow coupling_char = "' // &
699	TRIM( coupling_char ) // '" set by mrun-option "-y"'
700	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
701
702	ENDIF
703	!
704	!-- Check cloud scheme
705	IF ( cloud_scheme == 'seifert_beheng' ) THEN
706	icloud_scheme = 0
707	ELSEIF ( cloud_scheme == 'kessler' ) THEN
708	icloud_scheme = 1
709	ELSE
710	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
711	TRIM( cloud_scheme ) // '"'
712	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
713	ENDIF
714	!
715	!-- Check whether there are any illegal values
716	!-- Pressure solver:
717	IF ( psolver /= 'poisfft' .AND. &
718	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
719	message_string = 'unknown solver for perturbation pressure: psolver' // &
720	' = "' // TRIM( psolver ) // '"'
721	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
722	ENDIF
723
724	IF ( psolver == 'multigrid' ) THEN
725	IF ( cycle_mg == 'w' ) THEN
726	gamma_mg = 2
727	ELSEIF ( cycle_mg == 'v' ) THEN
728	gamma_mg = 1
729	ELSE
730	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
731	TRIM( cycle_mg ) // '"'
732	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
733	ENDIF
734	ENDIF
735
736	IF ( fft_method /= 'singleton-algorithm' .AND. &
737	fft_method /= 'temperton-algorithm' .AND. &
738	fft_method /= 'fftw' .AND. &
739	fft_method /= 'system-specific' ) THEN
740	message_string = 'unknown fft-algorithm: fft_method = "' // &
741	TRIM( fft_method ) // '"'
742	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
743	ENDIF
744
745	IF( momentum_advec == 'ws-scheme' .AND. &
746	.NOT. call_psolver_at_all_substeps ) THEN
747	message_string = 'psolver must be called at each RK3 substep when "'//&
748	TRIM(momentum_advec) // ' "is used for momentum_advec'
749	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
750	END IF
751	!
752	!-- Advection schemes:
753	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
754	THEN
755	message_string = 'unknown advection scheme: momentum_advec = "' // &
756	TRIM( momentum_advec ) // '"'
757	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
758	ENDIF
759	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
760	.AND. ( timestep_scheme == 'euler' .OR. &
761	timestep_scheme == 'runge-kutta-2' ) ) &
762	THEN
763	message_string = 'momentum_advec or scalar_advec = "' &
764	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
765	TRIM( timestep_scheme ) // '"'
766	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
767	ENDIF
768	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
769	scalar_advec /= 'bc-scheme' ) &
770	THEN
771	message_string = 'unknown advection scheme: scalar_advec = "' // &
772	TRIM( scalar_advec ) // '"'
773	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
774	ENDIF
775	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
776	THEN
777	message_string = 'advection_scheme scalar_advec = "' &
778	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
779	TRIM( loop_optimization ) // '"'
780	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
781	ENDIF
782
783	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
784	use_upstream_for_tke = .TRUE.
785	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
786	'use_sgs_for_particles = .TRUE.'
787	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
788	ENDIF
789
790	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
791	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
792	'curvature_solution_effects = .TRUE.'
793	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
794	ENDIF
795
796	!
797	!-- Set LOGICAL switches to enhance performance
798	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
799	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
800
801	!
802	!-- Timestep schemes:
803	SELECT CASE ( TRIM( timestep_scheme ) )
804
805	CASE ( 'euler' )
806	intermediate_timestep_count_max = 1
807
808	CASE ( 'runge-kutta-2' )
809	intermediate_timestep_count_max = 2
810
811	CASE ( 'runge-kutta-3' )
812	intermediate_timestep_count_max = 3
813
814	CASE DEFAULT
815	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
816	TRIM( timestep_scheme ) // '"'
817	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
818
819	END SELECT
820
821	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
822	.AND. timestep_scheme(1:5) == 'runge' ) THEN
823	message_string = 'momentum advection scheme "' // &
824	TRIM( momentum_advec ) // '" & does not work with ' // &
825	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
826	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
827	ENDIF
828
829	!
830	!-- Collision kernels:
831	SELECT CASE ( TRIM( collision_kernel ) )
832
833	CASE ( 'hall', 'hall_fast' )
834	hall_kernel = .TRUE.
835
836	CASE ( 'palm' )
837	palm_kernel = .TRUE.
838
839	CASE ( 'wang', 'wang_fast' )
840	wang_kernel = .TRUE.
841
842	CASE ( 'none' )
843
844
845	CASE DEFAULT
846	message_string = 'unknown collision kernel: collision_kernel = "' // &
847	TRIM( collision_kernel ) // '"'
848	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
849
850	END SELECT
851	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
852
853	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
854	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
855	!
856	!-- No restart run: several initialising actions are possible
857	action = initializing_actions
858	DO WHILE ( TRIM( action ) /= '' )
859	position = INDEX( action, ' ' )
860	SELECT CASE ( action(1:position-1) )
861
862	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
863	'by_user', 'initialize_vortex', 'initialize_ptanom' )
864	action = action(position+1:)
865
866	CASE DEFAULT
867	message_string = 'initializing_action = "' // &
868	TRIM( action ) // '" unkown or not allowed'
869	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
870
871	END SELECT
872	ENDDO
873	ENDIF
874
875	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
876	conserve_volume_flow ) THEN
877	message_string = 'initializing_actions = "initialize_vortex"' // &
878	' ist not allowed with conserve_volume_flow = .T.'
879	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
880	ENDIF
881
882
883	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
884	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
885	message_string = 'initializing_actions = "set_constant_profiles"' // &
886	' and "set_1d-model_profiles" are not allowed ' // &
887	'simultaneously'
888	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
889	ENDIF
890
891	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
892	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
893	message_string = 'initializing_actions = "set_constant_profiles"' // &
894	' and "by_user" are not allowed simultaneously'
895	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
896	ENDIF
897
898	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
899	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
900	message_string = 'initializing_actions = "by_user" and ' // &
901	'"set_1d-model_profiles" are not allowed simultaneously'
902	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
903	ENDIF
904
905	IF ( cloud_physics .AND. .NOT. humidity ) THEN
906	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
907	'not allowed with humidity = ', humidity
908	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
909	ENDIF
910
911	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
912	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
913	'not allowed with cloud_physics = ', cloud_physics
914	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
915	ENDIF
916
917	IF ( humidity .AND. sloping_surface ) THEN
918	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
919	'are not allowed simultaneously'
920	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
921	ENDIF
922
923	IF ( passive_scalar .AND. humidity ) THEN
924	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
925	'is not allowed simultaneously'
926	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
927	ENDIF
928
929	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
930	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
931	'coefficient & given value is drag_coefficient = 0.0'
932	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
933	ENDIF
934
935	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
936	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
937	' seifert_beheng'
938	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
939	ENDIF
940
941	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
942	icloud_scheme == 0 ) THEN
943	message_string = 'cloud_scheme = seifert_beheng requires ' // &
944	'loop_optimization = cache'
945	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
946	ENDIF
947
948	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
949	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
950	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
951	! 'precipitation = .TRUE. or drizzle = .TRUE.'
952	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
953	! ENDIF
954
955	!
956	!-- In case of no model continuation run, check initialising parameters and
957	!-- deduce further quantities
958	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
959
960	!
961	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
962	pt_init = pt_surface
963	IF ( humidity ) THEN
964	q_init = q_surface
965	ENDIF
966	IF ( ocean ) sa_init = sa_surface
967	IF ( passive_scalar ) q_init = s_surface
968	IF ( plant_canopy ) lad = 0.0
969
970	!
971	!--
972	!-- If required, compute initial profile of the geostrophic wind
973	!-- (component ug)
974	i = 1
975	gradient = 0.0
976
977	IF ( .NOT. ocean ) THEN
978
979	ug_vertical_gradient_level_ind(1) = 0
980	ug(0) = ug_surface
981	DO k = 1, nzt+1
982	IF ( i < 11 ) THEN
983	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
984	ug_vertical_gradient_level(i) >= 0.0 ) THEN
985	gradient = ug_vertical_gradient(i) / 100.0
986	ug_vertical_gradient_level_ind(i) = k - 1
987	i = i + 1
988	ENDIF
989	ENDIF
990	IF ( gradient /= 0.0 ) THEN
991	IF ( k /= 1 ) THEN
992	ug(k) = ug(k-1) + dzu(k) * gradient
993	ELSE
994	ug(k) = ug_surface + dzu(k) * gradient
995	ENDIF
996	ELSE
997	ug(k) = ug(k-1)
998	ENDIF
999	ENDDO
1000
1001	ELSE
1002
1003	ug_vertical_gradient_level_ind(1) = nzt+1
1004	ug(nzt+1) = ug_surface
1005	DO k = nzt, nzb, -1
1006	IF ( i < 11 ) THEN
1007	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
1008	ug_vertical_gradient_level(i) <= 0.0 ) THEN
1009	gradient = ug_vertical_gradient(i) / 100.0
1010	ug_vertical_gradient_level_ind(i) = k + 1
1011	i = i + 1
1012	ENDIF
1013	ENDIF
1014	IF ( gradient /= 0.0 ) THEN
1015	IF ( k /= nzt ) THEN
1016	ug(k) = ug(k+1) - dzu(k+1) * gradient
1017	ELSE
1018	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
1019	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
1020	ENDIF
1021	ELSE
1022	ug(k) = ug(k+1)
1023	ENDIF
1024	ENDDO
1025
1026	ENDIF
1027
1028	!
1029	!-- In case of no given gradients for ug, choose a zero gradient
1030	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
1031	ug_vertical_gradient_level(1) = 0.0
1032	ENDIF
1033
1034	!
1035	!--
1036	!-- If required, compute initial profile of the geostrophic wind
1037	!-- (component vg)
1038	i = 1
1039	gradient = 0.0
1040
1041	IF ( .NOT. ocean ) THEN
1042
1043	vg_vertical_gradient_level_ind(1) = 0
1044	vg(0) = vg_surface
1045	DO k = 1, nzt+1
1046	IF ( i < 11 ) THEN
1047	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1048	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1049	gradient = vg_vertical_gradient(i) / 100.0
1050	vg_vertical_gradient_level_ind(i) = k - 1
1051	i = i + 1
1052	ENDIF
1053	ENDIF
1054	IF ( gradient /= 0.0 ) THEN
1055	IF ( k /= 1 ) THEN
1056	vg(k) = vg(k-1) + dzu(k) * gradient
1057	ELSE
1058	vg(k) = vg_surface + dzu(k) * gradient
1059	ENDIF
1060	ELSE
1061	vg(k) = vg(k-1)
1062	ENDIF
1063	ENDDO
1064
1065	ELSE
1066
1067	vg_vertical_gradient_level_ind(1) = nzt+1
1068	vg(nzt+1) = vg_surface
1069	DO k = nzt, nzb, -1
1070	IF ( i < 11 ) THEN
1071	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1072	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1073	gradient = vg_vertical_gradient(i) / 100.0
1074	vg_vertical_gradient_level_ind(i) = k + 1
1075	i = i + 1
1076	ENDIF
1077	ENDIF
1078	IF ( gradient /= 0.0 ) THEN
1079	IF ( k /= nzt ) THEN
1080	vg(k) = vg(k+1) - dzu(k+1) * gradient
1081	ELSE
1082	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1083	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1084	ENDIF
1085	ELSE
1086	vg(k) = vg(k+1)
1087	ENDIF
1088	ENDDO
1089
1090	ENDIF
1091
1092	!
1093	!-- In case of no given gradients for vg, choose a zero gradient
1094	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1095	vg_vertical_gradient_level(1) = 0.0
1096	ENDIF
1097
1098	!
1099	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1100	!-- interpolate them from wind profile data (if given)
1101	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1102
1103	u_init = ug
1104	v_init = vg
1105
1106	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1107
1108	IF ( uv_heights(1) /= 0.0 ) THEN
1109	message_string = 'uv_heights(1) must be 0.0'
1110	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1111	ENDIF
1112
1113	use_prescribed_profile_data = .TRUE.
1114
1115	kk = 1
1116	u_init(0) = 0.0
1117	v_init(0) = 0.0
1118
1119	DO k = 1, nz+1
1120
1121	IF ( kk < 100 ) THEN
1122	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1123	kk = kk + 1
1124	IF ( kk == 100 ) EXIT
1125	ENDDO
1126	ENDIF
1127
1128	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1129	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1130	( uv_heights(kk+1) - uv_heights(kk) ) * &
1131	( u_profile(kk+1) - u_profile(kk) )
1132	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1133	( uv_heights(kk+1) - uv_heights(kk) ) * &
1134	( v_profile(kk+1) - v_profile(kk) )
1135	ELSE
1136	u_init(k) = u_profile(kk)
1137	v_init(k) = v_profile(kk)
1138	ENDIF
1139
1140	ENDDO
1141
1142	ELSE
1143
1144	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1145	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1146
1147	ENDIF
1148
1149	!
1150	!-- Compute initial temperature profile using the given temperature gradients
1151	IF ( .NOT. neutral ) THEN
1152
1153	i = 1
1154	gradient = 0.0
1155
1156	IF ( .NOT. ocean ) THEN
1157
1158	pt_vertical_gradient_level_ind(1) = 0
1159	DO k = 1, nzt+1
1160	IF ( i < 11 ) THEN
1161	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1162	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1163	gradient = pt_vertical_gradient(i) / 100.0
1164	pt_vertical_gradient_level_ind(i) = k - 1
1165	i = i + 1
1166	ENDIF
1167	ENDIF
1168	IF ( gradient /= 0.0 ) THEN
1169	IF ( k /= 1 ) THEN
1170	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1171	ELSE
1172	pt_init(k) = pt_surface + dzu(k) * gradient
1173	ENDIF
1174	ELSE
1175	pt_init(k) = pt_init(k-1)
1176	ENDIF
1177	ENDDO
1178
1179	ELSE
1180
1181	pt_vertical_gradient_level_ind(1) = nzt+1
1182	DO k = nzt, 0, -1
1183	IF ( i < 11 ) THEN
1184	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1185	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1186	gradient = pt_vertical_gradient(i) / 100.0
1187	pt_vertical_gradient_level_ind(i) = k + 1
1188	i = i + 1
1189	ENDIF
1190	ENDIF
1191	IF ( gradient /= 0.0 ) THEN
1192	IF ( k /= nzt ) THEN
1193	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1194	ELSE
1195	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1196	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1197	ENDIF
1198	ELSE
1199	pt_init(k) = pt_init(k+1)
1200	ENDIF
1201	ENDDO
1202
1203	ENDIF
1204
1205	ENDIF
1206
1207	!
1208	!-- In case of no given temperature gradients, choose gradient of neutral
1209	!-- stratification
1210	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1211	pt_vertical_gradient_level(1) = 0.0
1212	ENDIF
1213
1214	!
1215	!-- Store temperature gradient at the top boundary for possible Neumann
1216	!-- boundary condition
1217	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1218
1219	!
1220	!-- If required, compute initial humidity or scalar profile using the given
1221	!-- humidity/scalar gradient. In case of scalar transport, initially store
1222	!-- values of the scalar parameters on humidity parameters
1223	IF ( passive_scalar ) THEN
1224	bc_q_b = bc_s_b
1225	bc_q_t = bc_s_t
1226	q_surface = s_surface
1227	q_surface_initial_change = s_surface_initial_change
1228	q_vertical_gradient = s_vertical_gradient
1229	q_vertical_gradient_level = s_vertical_gradient_level
1230	surface_waterflux = surface_scalarflux
1231	wall_humidityflux = wall_scalarflux
1232	ENDIF
1233
1234	IF ( humidity .OR. passive_scalar ) THEN
1235
1236	i = 1
1237	gradient = 0.0
1238	q_vertical_gradient_level_ind(1) = 0
1239	DO k = 1, nzt+1
1240	IF ( i < 11 ) THEN
1241	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1242	q_vertical_gradient_level(i) >= 0.0 ) THEN
1243	gradient = q_vertical_gradient(i) / 100.0
1244	q_vertical_gradient_level_ind(i) = k - 1
1245	i = i + 1
1246	ENDIF
1247	ENDIF
1248	IF ( gradient /= 0.0 ) THEN
1249	IF ( k /= 1 ) THEN
1250	q_init(k) = q_init(k-1) + dzu(k) * gradient
1251	ELSE
1252	q_init(k) = q_init(k-1) + dzu(k) * gradient
1253	ENDIF
1254	ELSE
1255	q_init(k) = q_init(k-1)
1256	ENDIF
1257	!
1258	!-- Avoid negative humidities
1259	IF ( q_init(k) < 0.0 ) THEN
1260	q_init(k) = 0.0
1261	ENDIF
1262	ENDDO
1263
1264	!
1265	!-- In case of no given humidity gradients, choose zero gradient
1266	!-- conditions
1267	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1268	q_vertical_gradient_level(1) = 0.0
1269	ENDIF
1270	!
1271	!-- Store humidity, rain water content and rain drop concentration
1272	!-- gradient at the top boundary for possile Neumann boundary condition
1273	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1274	ENDIF
1275
1276	!
1277	!-- If required, compute initial salinity profile using the given salinity
1278	!-- gradients
1279	IF ( ocean ) THEN
1280
1281	i = 1
1282	gradient = 0.0
1283
1284	sa_vertical_gradient_level_ind(1) = nzt+1
1285	DO k = nzt, 0, -1
1286	IF ( i < 11 ) THEN
1287	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1288	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1289	gradient = sa_vertical_gradient(i) / 100.0
1290	sa_vertical_gradient_level_ind(i) = k + 1
1291	i = i + 1
1292	ENDIF
1293	ENDIF
1294	IF ( gradient /= 0.0 ) THEN
1295	IF ( k /= nzt ) THEN
1296	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1297	ELSE
1298	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1299	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1300	ENDIF
1301	ELSE
1302	sa_init(k) = sa_init(k+1)
1303	ENDIF
1304	ENDDO
1305
1306	ENDIF
1307
1308	!
1309	!-- If required compute the profile of leaf area density used in the plant
1310	!-- canopy model
1311	IF ( plant_canopy ) THEN
1312
1313	i = 1
1314	gradient = 0.0
1315
1316	IF ( .NOT. ocean ) THEN
1317
1318	lad(0) = lad_surface
1319
1320	lad_vertical_gradient_level_ind(1) = 0
1321	DO k = 1, pch_index
1322	IF ( i < 11 ) THEN
1323	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1324	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1325	gradient = lad_vertical_gradient(i)
1326	lad_vertical_gradient_level_ind(i) = k - 1
1327	i = i + 1
1328	ENDIF
1329	ENDIF
1330	IF ( gradient /= 0.0 ) THEN
1331	IF ( k /= 1 ) THEN
1332	lad(k) = lad(k-1) + dzu(k) * gradient
1333	ELSE
1334	lad(k) = lad_surface + dzu(k) *gradient
1335	ENDIF
1336	ELSE
1337	lad(k) = lad(k-1)
1338	ENDIF
1339	ENDDO
1340
1341	ENDIF
1342
1343	!
1344	!-- In case of no given leaf area density gradients, choose a vanishing
1345	!-- gradient
1346	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1347	lad_vertical_gradient_level(1) = 0.0
1348	ENDIF
1349
1350	ENDIF
1351
1352	ENDIF
1353
1354	!
1355	!-- Initialize large scale subsidence if required
1356	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1357	large_scale_subsidence = .TRUE.
1358	CALL init_w_subsidence
1359	ENDIF
1360
1361	!
1362	!-- Compute Coriolis parameter
1363	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1364	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1365
1366	!
1367	!-- Check and set buoyancy related parameters and switches
1368	IF ( reference_state == 'horizontal_average' ) THEN
1369	CONTINUE
1370	ELSEIF ( reference_state == 'initial_profile' ) THEN
1371	use_initial_profile_as_reference = .TRUE.
1372	ELSEIF ( reference_state == 'single_value' ) THEN
1373	use_single_reference_value = .TRUE.
1374	IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface
1375	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
1376	ELSE
1377	message_string = 'illegal value for reference_state: "' // &
1378	TRIM( reference_state ) // '"'
1379	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1380	ENDIF
1381
1382	!
1383	!-- Ocean runs always use reference values in the buoyancy term
1384	IF ( ocean ) THEN
1385	reference_state = 'single_value'
1386	use_single_reference_value = .TRUE.
1387	ENDIF
1388
1389	!
1390	!-- Sign of buoyancy/stability terms
1391	IF ( ocean ) atmos_ocean_sign = -1.0
1392
1393	!
1394	!-- Ocean version must use flux boundary conditions at the top
1395	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1396	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1397	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1398	ENDIF
1399
1400	!
1401	!-- In case of a given slope, compute the relevant quantities
1402	IF ( alpha_surface /= 0.0 ) THEN
1403	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1404	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1405	' ) must be < 90.0'
1406	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1407	ENDIF
1408	sloping_surface = .TRUE.
1409	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1410	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1411	ENDIF
1412
1413	!
1414	!-- Check time step and cfl_factor
1415	IF ( dt /= -1.0 ) THEN
1416	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1417	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1418	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1419	ENDIF
1420	dt_3d = dt
1421	dt_fixed = .TRUE.
1422	ENDIF
1423
1424	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1425	IF ( cfl_factor == -1.0 ) THEN
1426	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1427	cfl_factor = 0.8
1428	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1429	cfl_factor = 0.9
1430	ELSE
1431	cfl_factor = 0.9
1432	ENDIF
1433	ELSE
1434	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1435	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1436	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1437	ENDIF
1438	ENDIF
1439
1440	!
1441	!-- Store simulated time at begin
1442	simulated_time_at_begin = simulated_time
1443
1444	!
1445	!-- Store reference time for coupled runs and change the coupling flag,
1446	!-- if ...
1447	IF ( simulated_time == 0.0 ) THEN
1448	IF ( coupling_start_time == 0.0 ) THEN
1449	time_since_reference_point = 0.0
1450	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1451	run_coupled = .FALSE.
1452	ENDIF
1453	ENDIF
1454
1455	!
1456	!-- Set wind speed in the Galilei-transformed system
1457	IF ( galilei_transformation ) THEN
1458	IF ( use_ug_for_galilei_tr .AND. &
1459	ug_vertical_gradient_level(1) == 0.0 .AND. &
1460	ug_vertical_gradient(1) == 0.0 .AND. &
1461	vg_vertical_gradient_level(1) == 0.0 .AND. &
1462	vg_vertical_gradient(1) == 0.0 ) THEN
1463	u_gtrans = ug_surface * 0.6
1464	v_gtrans = vg_surface * 0.6
1465	ELSEIF ( use_ug_for_galilei_tr .AND. &
1466	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1467	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1468	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1469	' with galilei transformation'
1470	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1471	ELSEIF ( use_ug_for_galilei_tr .AND. &
1472	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1473	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1474	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1475	' with galilei transformation'
1476	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1477	ELSE
1478	message_string = 'variable translation speed used for galilei-' // &
1479	'transformation, which may cause & instabilities in stably ' // &
1480	'stratified regions'
1481	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1482	ENDIF
1483	ENDIF
1484
1485	!
1486	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1487	!-- fluxes have to be used in the diffusion-terms
1488	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1489
1490	!
1491	!-- Check boundary conditions and set internal variables:
1492	!-- Lateral boundary conditions
1493	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1494	bc_lr /= 'radiation/dirichlet' ) THEN
1495	message_string = 'unknown boundary condition: bc_lr = "' // &
1496	TRIM( bc_lr ) // '"'
1497	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1498	ENDIF
1499	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1500	bc_ns /= 'radiation/dirichlet' ) THEN
1501	message_string = 'unknown boundary condition: bc_ns = "' // &
1502	TRIM( bc_ns ) // '"'
1503	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1504	ENDIF
1505
1506	!
1507	!-- Internal variables used for speed optimization in if clauses
1508	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1509	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1510	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1511	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1512	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1513	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1514
1515	!
1516	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1517	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1518	!-- and tools do not work with non-cyclic boundary conditions.
1519	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1520	IF ( psolver /= 'multigrid' ) THEN
1521	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1522	'psolver = "' // TRIM( psolver ) // '"'
1523	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1524	ENDIF
1525	IF ( momentum_advec /= 'pw-scheme' .AND. &
1526	momentum_advec /= 'ws-scheme') THEN
1527	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1528	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1529	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1530	ENDIF
1531	IF ( scalar_advec /= 'pw-scheme' .AND. &
1532	scalar_advec /= 'ws-scheme' ) THEN
1533	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1534	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1535	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1536	ENDIF
1537	IF ( galilei_transformation ) THEN
1538	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1539	'galilei_transformation = .T.'
1540	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1541	ENDIF
1542	ENDIF
1543
1544	!
1545	!-- Bottom boundary condition for the turbulent Kinetic energy
1546	IF ( bc_e_b == 'neumann' ) THEN
1547	ibc_e_b = 1
1548	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1549	ibc_e_b = 2
1550	IF ( prandtl_layer ) THEN
1551	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1552	TRIM( bc_e_b ) // '"'
1553	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1554	ENDIF
1555	IF ( .NOT. prandtl_layer ) THEN
1556	bc_e_b = 'neumann'
1557	ibc_e_b = 1
1558	message_string = 'boundary condition bc_e_b changed to "' // &
1559	TRIM( bc_e_b ) // '"'
1560	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1561	ENDIF
1562	ELSE
1563	message_string = 'unknown boundary condition: bc_e_b = "' // &
1564	TRIM( bc_e_b ) // '"'
1565	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1566	ENDIF
1567
1568	!
1569	!-- Boundary conditions for perturbation pressure
1570	IF ( bc_p_b == 'dirichlet' ) THEN
1571	ibc_p_b = 0
1572	ELSEIF ( bc_p_b == 'neumann' ) THEN
1573	ibc_p_b = 1
1574	ELSE
1575	message_string = 'unknown boundary condition: bc_p_b = "' // &
1576	TRIM( bc_p_b ) // '"'
1577	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1578	ENDIF
1579
1580	IF ( bc_p_t == 'dirichlet' ) THEN
1581	ibc_p_t = 0
1582	ELSEIF ( bc_p_t == 'neumann' ) THEN
1583	ibc_p_t = 1
1584	ELSE
1585	message_string = 'unknown boundary condition: bc_p_t = "' // &
1586	TRIM( bc_p_t ) // '"'
1587	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1588	ENDIF
1589
1590	!
1591	!-- Boundary conditions for potential temperature
1592	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1593	ibc_pt_b = 2
1594	ELSE
1595	IF ( bc_pt_b == 'dirichlet' ) THEN
1596	ibc_pt_b = 0
1597	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1598	ibc_pt_b = 1
1599	ELSE
1600	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1601	TRIM( bc_pt_b ) // '"'
1602	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1603	ENDIF
1604	ENDIF
1605
1606	IF ( bc_pt_t == 'dirichlet' ) THEN
1607	ibc_pt_t = 0
1608	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1609	ibc_pt_t = 1
1610	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1611	ibc_pt_t = 2
1612	ELSE
1613	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1614	TRIM( bc_pt_t ) // '"'
1615	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1616	ENDIF
1617
1618	IF ( surface_heatflux == 9999999.9 ) THEN
1619	constant_heatflux = .FALSE.
1620	IF ( large_scale_forcing ) THEN
1621	IF ( ibc_pt_b == 0 ) THEN
1622	constant_heatflux = .FALSE.
1623	ELSEIF ( ibc_pt_b == 1 ) THEN
1624	constant_heatflux = .TRUE.
1625	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1626	surface_heatflux = shf_surf(1)
1627	ENDIF
1628	ENDIF
1629	ENDIF
1630	ELSE
1631	constant_heatflux = .TRUE.
1632	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1633	large_scale_forcing ) THEN
1634	surface_heatflux = shf_surf(1)
1635	ENDIF
1636	ENDIF
1637
1638	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1639
1640	IF ( neutral ) THEN
1641
1642	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1643	THEN
1644	message_string = 'heatflux must not be set for pure neutral flow'
1645	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1646	ENDIF
1647
1648	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1649	THEN
1650	message_string = 'heatflux must not be set for pure neutral flow'
1651	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1652	ENDIF
1653
1654	ENDIF
1655
1656	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1657	top_momentumflux_v /= 9999999.9 ) THEN
1658	constant_top_momentumflux = .TRUE.
1659	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1660	top_momentumflux_v == 9999999.9 ) ) THEN
1661	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1662	'must be set'
1663	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1664	ENDIF
1665
1666	!
1667	!-- A given surface temperature implies Dirichlet boundary condition for
1668	!-- temperature. In this case specification of a constant heat flux is
1669	!-- forbidden.
1670	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1671	surface_heatflux /= 0.0 ) THEN
1672	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1673	'& is not allowed with constant_heatflux = .TRUE.'
1674	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1675	ENDIF
1676	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1677	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1678	'wed with pt_surface_initial_change (/=0) = ', &
1679	pt_surface_initial_change
1680	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1681	ENDIF
1682
1683	!
1684	!-- A given temperature at the top implies Dirichlet boundary condition for
1685	!-- temperature. In this case specification of a constant heat flux is
1686	!-- forbidden.
1687	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1688	top_heatflux /= 0.0 ) THEN
1689	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1690	'" is not allowed with constant_top_heatflux = .TRUE.'
1691	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1692	ENDIF
1693
1694	!
1695	!-- Boundary conditions for salinity
1696	IF ( ocean ) THEN
1697	IF ( bc_sa_t == 'dirichlet' ) THEN
1698	ibc_sa_t = 0
1699	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1700	ibc_sa_t = 1
1701	ELSE
1702	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1703	TRIM( bc_sa_t ) // '"'
1704	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1705	ENDIF
1706
1707	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1708	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1709	message_string = 'boundary condition: bc_sa_t = "' // &
1710	TRIM( bc_sa_t ) // '" requires to set ' // &
1711	'top_salinityflux'
1712	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1713	ENDIF
1714
1715	!
1716	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1717	!-- salinity. In this case specification of a constant salinity flux is
1718	!-- forbidden.
1719	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1720	top_salinityflux /= 0.0 ) THEN
1721	message_string = 'boundary condition: bc_sa_t = "' // &
1722	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1723	'constant_top_salinityflux = .TRUE.'
1724	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1725	ENDIF
1726
1727	ENDIF
1728
1729	!
1730	!-- In case of humidity or passive scalar, set boundary conditions for total
1731	!-- water content / scalar
1732	IF ( humidity .OR. passive_scalar ) THEN
1733	IF ( humidity ) THEN
1734	sq = 'q'
1735	ELSE
1736	sq = 's'
1737	ENDIF
1738	IF ( bc_q_b == 'dirichlet' ) THEN
1739	ibc_q_b = 0
1740	ELSEIF ( bc_q_b == 'neumann' ) THEN
1741	ibc_q_b = 1
1742	ELSE
1743	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1744	'_b ="' // TRIM( bc_q_b ) // '"'
1745	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1746	ENDIF
1747	IF ( bc_q_t == 'dirichlet' ) THEN
1748	ibc_q_t = 0
1749	ELSEIF ( bc_q_t == 'neumann' ) THEN
1750	ibc_q_t = 1
1751	ELSE
1752	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1753	'_t ="' // TRIM( bc_q_t ) // '"'
1754	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1755	ENDIF
1756
1757	IF ( surface_waterflux == 9999999.9 ) THEN
1758	constant_waterflux = .FALSE.
1759	IF ( large_scale_forcing ) THEN
1760	IF ( ibc_q_b == 0 ) THEN
1761	constant_waterflux = .FALSE.
1762	ELSEIF ( ibc_q_b == 1 ) THEN
1763	constant_waterflux = .TRUE.
1764	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1765	surface_waterflux = qsws_surf(1)
1766	ENDIF
1767	ENDIF
1768	ENDIF
1769	ELSE
1770	constant_waterflux = .TRUE.
1771	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
1772	large_scale_forcing ) THEN
1773	surface_waterflux = qsws_surf(1)
1774	ENDIF
1775	ENDIF
1776
1777	!
1778	!-- A given surface humidity implies Dirichlet boundary condition for
1779	!-- humidity. In this case specification of a constant water flux is
1780	!-- forbidden.
1781	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1782	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1783	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1784	'th prescribed surface flux'
1785	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1786	ENDIF
1787	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1788	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1789	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1790	q_surface_initial_change
1791	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1792	ENDIF
1793
1794	ENDIF
1795	!
1796	!-- Boundary conditions for horizontal components of wind speed
1797	IF ( bc_uv_b == 'dirichlet' ) THEN
1798	ibc_uv_b = 0
1799	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1800	ibc_uv_b = 1
1801	IF ( prandtl_layer ) THEN
1802	message_string = 'boundary condition: bc_uv_b = "' // &
1803	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1804	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1805	ENDIF
1806	ELSE
1807	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1808	TRIM( bc_uv_b ) // '"'
1809	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1810	ENDIF
1811	!
1812	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1813	!-- assigned with the u and v values of the ocean surface
1814	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1815	ibc_uv_b = 2
1816	ENDIF
1817
1818	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1819	bc_uv_t = 'neumann'
1820	ibc_uv_t = 1
1821	ELSE
1822	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1823	ibc_uv_t = 0
1824	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1825	!
1826	!-- Velocities for the initial u,v-profiles are set zero at the top
1827	!-- in case of dirichlet_0 conditions
1828	u_init(nzt+1) = 0.0
1829	v_init(nzt+1) = 0.0
1830	ENDIF
1831	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1832	ibc_uv_t = 1
1833	ELSE
1834	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1835	TRIM( bc_uv_t ) // '"'
1836	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1837	ENDIF
1838	ENDIF
1839
1840	!
1841	!-- Compute and check, respectively, the Rayleigh Damping parameter
1842	IF ( rayleigh_damping_factor == -1.0 ) THEN
1843	rayleigh_damping_factor = 0.0
1844	ELSE
1845	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1846	THEN
1847	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1848	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1849	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1850	ENDIF
1851	ENDIF
1852
1853	IF ( rayleigh_damping_height == -1.0 ) THEN
1854	IF ( .NOT. ocean ) THEN
1855	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1856	ELSE
1857	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1858	ENDIF
1859	ELSE
1860	IF ( .NOT. ocean ) THEN
1861	IF ( rayleigh_damping_height < 0.0 .OR. &
1862	rayleigh_damping_height > zu(nzt) ) THEN
1863	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1864	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1865	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1866	ENDIF
1867	ELSE
1868	IF ( rayleigh_damping_height > 0.0 .OR. &
1869	rayleigh_damping_height < zu(nzb) ) THEN
1870	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1871	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1872	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1873	ENDIF
1874	ENDIF
1875	ENDIF
1876
1877	!
1878	!-- Check number of chosen statistic regions. More than 10 regions are not
1879	!-- allowed, because so far no more than 10 corresponding output files can
1880	!-- be opened (cf. check_open)
1881	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1882	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1883	statistic_regions+1, ' but only 10 regions are allowed'
1884	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1885	ENDIF
1886	IF ( normalizing_region > statistic_regions .OR. &
1887	normalizing_region < 0) THEN
1888	WRITE ( message_string, * ) 'normalizing_region = ', &
1889	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1890	' (value of statistic_regions)'
1891	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1892	ENDIF
1893
1894	!
1895	!-- Check the interval for sorting particles.
1896	!-- Using particles as cloud droplets requires sorting after each timestep.
1897	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1898	dt_sort_particles = 0.0
1899	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1900	'_droplets = .TRUE.'
1901	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1902	ENDIF
1903
1904	!
1905	!-- Set the default intervals for data output, if necessary
1906	!-- NOTE: dt_dosp has already been set in package_parin
1907	IF ( dt_data_output /= 9999999.9 ) THEN
1908	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1909	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1910	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1911	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1912	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1913	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1914	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1915	DO mid = 1, max_masks
1916	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1917	ENDDO
1918	ENDIF
1919
1920	!
1921	!-- Set the default skip time intervals for data output, if necessary
1922	IF ( skip_time_dopr == 9999999.9 ) &
1923	skip_time_dopr = skip_time_data_output
1924	IF ( skip_time_dosp == 9999999.9 ) &
1925	skip_time_dosp = skip_time_data_output
1926	IF ( skip_time_do2d_xy == 9999999.9 ) &
1927	skip_time_do2d_xy = skip_time_data_output
1928	IF ( skip_time_do2d_xz == 9999999.9 ) &
1929	skip_time_do2d_xz = skip_time_data_output
1930	IF ( skip_time_do2d_yz == 9999999.9 ) &
1931	skip_time_do2d_yz = skip_time_data_output
1932	IF ( skip_time_do3d == 9999999.9 ) &
1933	skip_time_do3d = skip_time_data_output
1934	IF ( skip_time_data_output_av == 9999999.9 ) &
1935	skip_time_data_output_av = skip_time_data_output
1936	DO mid = 1, max_masks
1937	IF ( skip_time_domask(mid) == 9999999.9 ) &
1938	skip_time_domask(mid) = skip_time_data_output
1939	ENDDO
1940
1941	!
1942	!-- Check the average intervals (first for 3d-data, then for profiles and
1943	!-- spectra)
1944	IF ( averaging_interval > dt_data_output_av ) THEN
1945	WRITE( message_string, * ) 'averaging_interval = ', &
1946	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1947	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1948	ENDIF
1949
1950	IF ( averaging_interval_pr == 9999999.9 ) THEN
1951	averaging_interval_pr = averaging_interval
1952	ENDIF
1953
1954	IF ( averaging_interval_pr > dt_dopr ) THEN
1955	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1956	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1957	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1958	ENDIF
1959
1960	IF ( averaging_interval_sp == 9999999.9 ) THEN
1961	averaging_interval_sp = averaging_interval
1962	ENDIF
1963
1964	IF ( averaging_interval_sp > dt_dosp ) THEN
1965	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1966	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1967	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1968	ENDIF
1969
1970	!
1971	!-- Set the default interval for profiles entering the temporal average
1972	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1973	dt_averaging_input_pr = dt_averaging_input
1974	ENDIF
1975
1976	!
1977	!-- Set the default interval for the output of timeseries to a reasonable
1978	!-- value (tries to minimize the number of calls of flow_statistics)
1979	IF ( dt_dots == 9999999.9 ) THEN
1980	IF ( averaging_interval_pr == 0.0 ) THEN
1981	dt_dots = MIN( dt_run_control, dt_dopr )
1982	ELSE
1983	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1984	ENDIF
1985	ENDIF
1986
1987	!
1988	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1989	IF ( dt_averaging_input > averaging_interval ) THEN
1990	WRITE( message_string, * ) 'dt_averaging_input = ', &
1991	dt_averaging_input, ' must be <= averaging_interval = ', &
1992	averaging_interval
1993	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1994	ENDIF
1995
1996	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1997	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1998	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1999	averaging_interval_pr
2000	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
2001	ENDIF
2002
2003	!
2004	!-- Set the default value for the integration interval of precipitation amount
2005	IF ( precipitation ) THEN
2006	IF ( precipitation_amount_interval == 9999999.9 ) THEN
2007	precipitation_amount_interval = dt_do2d_xy
2008	ELSE
2009	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
2010	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
2011	precipitation_amount_interval, ' must not be larger than ', &
2012	'dt_do2d_xy = ', dt_do2d_xy
2013	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
2014	ENDIF
2015	ENDIF
2016	ENDIF
2017
2018	!
2019	!-- Determine the number of output profiles and check whether they are
2020	!-- permissible
2021	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
2022
2023	dopr_n = dopr_n + 1
2024	i = dopr_n
2025
2026	!
2027	!-- Determine internal profile number (for hom, homs)
2028	!-- and store height levels
2029	SELECT CASE ( TRIM( data_output_pr(i) ) )
2030
2031	CASE ( 'u', '#u' )
2032	dopr_index(i) = 1
2033	dopr_unit(i) = 'm/s'
2034	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
2035	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2036	dopr_initial_index(i) = 5
2037	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
2038	data_output_pr(i) = data_output_pr(i)(2:)
2039	ENDIF
2040
2041	CASE ( 'v', '#v' )
2042	dopr_index(i) = 2
2043	dopr_unit(i) = 'm/s'
2044	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
2045	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2046	dopr_initial_index(i) = 6
2047	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
2048	data_output_pr(i) = data_output_pr(i)(2:)
2049	ENDIF
2050
2051	CASE ( 'w' )
2052	dopr_index(i) = 3
2053	dopr_unit(i) = 'm/s'
2054	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2055
2056	CASE ( 'pt', '#pt' )
2057	IF ( .NOT. cloud_physics ) THEN
2058	dopr_index(i) = 4
2059	dopr_unit(i) = 'K'
2060	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2061	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2062	dopr_initial_index(i) = 7
2063	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2064	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
2065	data_output_pr(i) = data_output_pr(i)(2:)
2066	ENDIF
2067	ELSE
2068	dopr_index(i) = 43
2069	dopr_unit(i) = 'K'
2070	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2071	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2072	dopr_initial_index(i) = 28
2073	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2074	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
2075	data_output_pr(i) = data_output_pr(i)(2:)
2076	ENDIF
2077	ENDIF
2078
2079	CASE ( 'e' )
2080	dopr_index(i) = 8
2081	dopr_unit(i) = 'm2/s2'
2082	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2083	hom(nzb,2,8,:) = 0.0
2084
2085	CASE ( 'km', '#km' )
2086	dopr_index(i) = 9
2087	dopr_unit(i) = 'm2/s'
2088	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2089	hom(nzb,2,9,:) = 0.0
2090	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2091	dopr_initial_index(i) = 23
2092	hom(:,2,23,:) = hom(:,2,9,:)
2093	data_output_pr(i) = data_output_pr(i)(2:)
2094	ENDIF
2095
2096	CASE ( 'kh', '#kh' )
2097	dopr_index(i) = 10
2098	dopr_unit(i) = 'm2/s'
2099	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2100	hom(nzb,2,10,:) = 0.0
2101	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2102	dopr_initial_index(i) = 24
2103	hom(:,2,24,:) = hom(:,2,10,:)
2104	data_output_pr(i) = data_output_pr(i)(2:)
2105	ENDIF
2106
2107	CASE ( 'l', '#l' )
2108	dopr_index(i) = 11
2109	dopr_unit(i) = 'm'
2110	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2111	hom(nzb,2,11,:) = 0.0
2112	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2113	dopr_initial_index(i) = 25
2114	hom(:,2,25,:) = hom(:,2,11,:)
2115	data_output_pr(i) = data_output_pr(i)(2:)
2116	ENDIF
2117
2118	CASE ( 'w"u"' )
2119	dopr_index(i) = 12
2120	dopr_unit(i) = 'm2/s2'
2121	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2122	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2123
2124	CASE ( 'wu' )
2125	dopr_index(i) = 13
2126	dopr_unit(i) = 'm2/s2'
2127	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2128
2129	CASE ( 'w"v"' )
2130	dopr_index(i) = 14
2131	dopr_unit(i) = 'm2/s2'
2132	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2133	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2134
2135	CASE ( 'wv' )
2136	dopr_index(i) = 15
2137	dopr_unit(i) = 'm2/s2'
2138	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2139
2140	CASE ( 'w"pt"' )
2141	dopr_index(i) = 16
2142	dopr_unit(i) = 'K m/s'
2143	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2144
2145	CASE ( 'wpt' )
2146	dopr_index(i) = 17
2147	dopr_unit(i) = 'K m/s'
2148	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2149
2150	CASE ( 'wpt' )
2151	dopr_index(i) = 18
2152	dopr_unit(i) = 'K m/s'
2153	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2154
2155	CASE ( 'wu' )
2156	dopr_index(i) = 19
2157	dopr_unit(i) = 'm2/s2'
2158	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2159	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2160
2161	CASE ( 'wv' )
2162	dopr_index(i) = 20
2163	dopr_unit(i) = 'm2/s2'
2164	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2165	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2166
2167	CASE ( 'wptBC' )
2168	dopr_index(i) = 21
2169	dopr_unit(i) = 'K m/s'
2170	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2171
2172	CASE ( 'wptBC' )
2173	dopr_index(i) = 22
2174	dopr_unit(i) = 'K m/s'
2175	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2176
2177	CASE ( 'sa', '#sa' )
2178	IF ( .NOT. ocean ) THEN
2179	message_string = 'data_output_pr = ' // &
2180	TRIM( data_output_pr(i) ) // ' is not imp' // &
2181	'lemented for ocean = .FALSE.'
2182	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2183	ELSE
2184	dopr_index(i) = 23
2185	dopr_unit(i) = 'psu'
2186	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2187	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2188	dopr_initial_index(i) = 26
2189	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2190	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2191	data_output_pr(i) = data_output_pr(i)(2:)
2192	ENDIF
2193	ENDIF
2194
2195	CASE ( 'u*2' )
2196	dopr_index(i) = 30
2197	dopr_unit(i) = 'm2/s2'
2198	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2199
2200	CASE ( 'v*2' )
2201	dopr_index(i) = 31
2202	dopr_unit(i) = 'm2/s2'
2203	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2204
2205	CASE ( 'w*2' )
2206	dopr_index(i) = 32
2207	dopr_unit(i) = 'm2/s2'
2208	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2209
2210	CASE ( 'pt*2' )
2211	dopr_index(i) = 33
2212	dopr_unit(i) = 'K2'
2213	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2214
2215	CASE ( 'e*' )
2216	dopr_index(i) = 34
2217	dopr_unit(i) = 'm2/s2'
2218	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2219
2220	CASE ( 'w2pt' )
2221	dopr_index(i) = 35
2222	dopr_unit(i) = 'K m2/s2'
2223	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2224
2225	CASE ( 'wpt2' )
2226	dopr_index(i) = 36
2227	dopr_unit(i) = 'K2 m/s'
2228	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2229
2230	CASE ( 'we' )
2231	dopr_index(i) = 37
2232	dopr_unit(i) = 'm3/s3'
2233	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2234
2235	CASE ( 'w*3' )
2236	dopr_index(i) = 38
2237	dopr_unit(i) = 'm3/s3'
2238	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2239
2240	CASE ( 'Sw' )
2241	dopr_index(i) = 39
2242	dopr_unit(i) = 'none'
2243	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2244
2245	CASE ( 'p' )
2246	dopr_index(i) = 40
2247	dopr_unit(i) = 'Pa'
2248	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2249
2250	CASE ( 'q', '#q' )
2251	IF ( .NOT. humidity ) THEN
2252	message_string = 'data_output_pr = ' // &
2253	TRIM( data_output_pr(i) ) // ' is not imp' // &
2254	'lemented for humidity = .FALSE.'
2255	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2256	ELSE
2257	dopr_index(i) = 41
2258	dopr_unit(i) = 'kg/kg'
2259	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2260	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2261	dopr_initial_index(i) = 26
2262	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2263	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2264	data_output_pr(i) = data_output_pr(i)(2:)
2265	ENDIF
2266	ENDIF
2267
2268	CASE ( 's', '#s' )
2269	IF ( .NOT. passive_scalar ) THEN
2270	message_string = 'data_output_pr = ' // &
2271	TRIM( data_output_pr(i) ) // ' is not imp' // &
2272	'lemented for passive_scalar = .FALSE.'
2273	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2274	ELSE
2275	dopr_index(i) = 41
2276	dopr_unit(i) = 'kg/m3'
2277	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2278	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2279	dopr_initial_index(i) = 26
2280	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2281	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2282	data_output_pr(i) = data_output_pr(i)(2:)
2283	ENDIF
2284	ENDIF
2285
2286	CASE ( 'qv', '#qv' )
2287	IF ( .NOT. cloud_physics ) THEN
2288	dopr_index(i) = 41
2289	dopr_unit(i) = 'kg/kg'
2290	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2291	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2292	dopr_initial_index(i) = 26
2293	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2294	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2295	data_output_pr(i) = data_output_pr(i)(2:)
2296	ENDIF
2297	ELSE
2298	dopr_index(i) = 42
2299	dopr_unit(i) = 'kg/kg'
2300	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2301	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2302	dopr_initial_index(i) = 27
2303	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2304	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2305	data_output_pr(i) = data_output_pr(i)(2:)
2306	ENDIF
2307	ENDIF
2308
2309	CASE ( 'lpt', '#lpt' )
2310	IF ( .NOT. cloud_physics ) THEN
2311	message_string = 'data_output_pr = ' // &
2312	TRIM( data_output_pr(i) ) // ' is not imp' // &
2313	'lemented for cloud_physics = .FALSE.'
2314	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2315	ELSE
2316	dopr_index(i) = 4
2317	dopr_unit(i) = 'K'
2318	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2319	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2320	dopr_initial_index(i) = 7
2321	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2322	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2323	data_output_pr(i) = data_output_pr(i)(2:)
2324	ENDIF
2325	ENDIF
2326
2327	CASE ( 'vpt', '#vpt' )
2328	dopr_index(i) = 44
2329	dopr_unit(i) = 'K'
2330	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2331	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2332	dopr_initial_index(i) = 29
2333	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2334	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2335	data_output_pr(i) = data_output_pr(i)(2:)
2336	ENDIF
2337
2338	CASE ( 'w"vpt"' )
2339	dopr_index(i) = 45
2340	dopr_unit(i) = 'K m/s'
2341	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2342
2343	CASE ( 'wvpt' )
2344	dopr_index(i) = 46
2345	dopr_unit(i) = 'K m/s'
2346	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2347
2348	CASE ( 'wvpt' )
2349	dopr_index(i) = 47
2350	dopr_unit(i) = 'K m/s'
2351	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2352
2353	CASE ( 'w"q"' )
2354	IF ( .NOT. humidity ) THEN
2355	message_string = 'data_output_pr = ' // &
2356	TRIM( data_output_pr(i) ) // ' is not imp' // &
2357	'lemented for humidity = .FALSE.'
2358	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2359	ELSE
2360	dopr_index(i) = 48
2361	dopr_unit(i) = 'kg/kg m/s'
2362	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2363	ENDIF
2364
2365	CASE ( 'wq' )
2366	IF ( .NOT. humidity ) THEN
2367	message_string = 'data_output_pr = ' // &
2368	TRIM( data_output_pr(i) ) // ' is not imp' // &
2369	'lemented for humidity = .FALSE.'
2370	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2371	ELSE
2372	dopr_index(i) = 49
2373	dopr_unit(i) = 'kg/kg m/s'
2374	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2375	ENDIF
2376
2377	CASE ( 'wq' )
2378	IF ( .NOT. humidity ) THEN
2379	message_string = 'data_output_pr = ' // &
2380	TRIM( data_output_pr(i) ) // ' is not imp' // &
2381	'lemented for humidity = .FALSE.'
2382	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2383	ELSE
2384	dopr_index(i) = 50
2385	dopr_unit(i) = 'kg/kg m/s'
2386	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2387	ENDIF
2388
2389	CASE ( 'w"s"' )
2390	IF ( .NOT. passive_scalar ) THEN
2391	message_string = 'data_output_pr = ' // &
2392	TRIM( data_output_pr(i) ) // ' is not imp' // &
2393	'lemented for passive_scalar = .FALSE.'
2394	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2395	ELSE
2396	dopr_index(i) = 48
2397	dopr_unit(i) = 'kg/m3 m/s'
2398	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2399	ENDIF
2400
2401	CASE ( 'ws' )
2402	IF ( .NOT. passive_scalar ) THEN
2403	message_string = 'data_output_pr = ' // &
2404	TRIM( data_output_pr(i) ) // ' is not imp' // &
2405	'lemented for passive_scalar = .FALSE.'
2406	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2407	ELSE
2408	dopr_index(i) = 49
2409	dopr_unit(i) = 'kg/m3 m/s'
2410	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2411	ENDIF
2412
2413	CASE ( 'ws' )
2414	IF ( .NOT. passive_scalar ) THEN
2415	message_string = 'data_output_pr = ' // &
2416	TRIM( data_output_pr(i) ) // ' is not imp' // &
2417	'lemented for passive_scalar = .FALSE.'
2418	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2419	ELSE
2420	dopr_index(i) = 50
2421	dopr_unit(i) = 'kg/m3 m/s'
2422	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2423	ENDIF
2424
2425	CASE ( 'w"qv"' )
2426	IF ( humidity .AND. .NOT. cloud_physics ) &
2427	THEN
2428	dopr_index(i) = 48
2429	dopr_unit(i) = 'kg/kg m/s'
2430	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2431	ELSEIF( humidity .AND. cloud_physics ) THEN
2432	dopr_index(i) = 51
2433	dopr_unit(i) = 'kg/kg m/s'
2434	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2435	ELSE
2436	message_string = 'data_output_pr = ' // &
2437	TRIM( data_output_pr(i) ) // ' is not imp' // &
2438	'lemented for cloud_physics = .FALSE. an&' // &
2439	'd humidity = .FALSE.'
2440	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2441	ENDIF
2442
2443	CASE ( 'wqv' )
2444	IF ( humidity .AND. .NOT. cloud_physics ) &
2445	THEN
2446	dopr_index(i) = 49
2447	dopr_unit(i) = 'kg/kg m/s'
2448	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2449	ELSEIF( humidity .AND. cloud_physics ) THEN
2450	dopr_index(i) = 52
2451	dopr_unit(i) = 'kg/kg m/s'
2452	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2453	ELSE
2454	message_string = 'data_output_pr = ' // &
2455	TRIM( data_output_pr(i) ) // ' is not imp' // &
2456	'lemented for cloud_physics = .FALSE. an&' // &
2457	'd humidity = .FALSE.'
2458	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2459	ENDIF
2460
2461	CASE ( 'wqv' )
2462	IF ( humidity .AND. .NOT. cloud_physics ) &
2463	THEN
2464	dopr_index(i) = 50
2465	dopr_unit(i) = 'kg/kg m/s'
2466	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2467	ELSEIF( humidity .AND. cloud_physics ) THEN
2468	dopr_index(i) = 53
2469	dopr_unit(i) = 'kg/kg m/s'
2470	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2471	ELSE
2472	message_string = 'data_output_pr = ' // &
2473	TRIM( data_output_pr(i) ) // ' is not imp' // &
2474	'lemented for cloud_physics = .FALSE. an&' // &
2475	'd humidity = .FALSE.'
2476	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2477	ENDIF
2478
2479	CASE ( 'ql' )
2480	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2481	message_string = 'data_output_pr = ' // &
2482	TRIM( data_output_pr(i) ) // ' is not imp' // &
2483	'lemented for cloud_physics = .FALSE. or' // &
2484	'&cloud_droplets = .FALSE.'
2485	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2486	ELSE
2487	dopr_index(i) = 54
2488	dopr_unit(i) = 'kg/kg'
2489	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2490	ENDIF
2491
2492	CASE ( 'wuu*:dz' )
2493	dopr_index(i) = 55
2494	dopr_unit(i) = 'm2/s3'
2495	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2496
2497	CASE ( 'wp:dz' )
2498	dopr_index(i) = 56
2499	dopr_unit(i) = 'm2/s3'
2500	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2501
2502	CASE ( 'w"e:dz' )
2503	dopr_index(i) = 57
2504	dopr_unit(i) = 'm2/s3'
2505	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2506
2507
2508	CASE ( 'u"pt"' )
2509	dopr_index(i) = 58
2510	dopr_unit(i) = 'K m/s'
2511	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2512
2513	CASE ( 'upt' )
2514	dopr_index(i) = 59
2515	dopr_unit(i) = 'K m/s'
2516	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2517
2518	CASE ( 'upt_t' )
2519	dopr_index(i) = 60
2520	dopr_unit(i) = 'K m/s'
2521	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2522
2523	CASE ( 'v"pt"' )
2524	dopr_index(i) = 61
2525	dopr_unit(i) = 'K m/s'
2526	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2527
2528	CASE ( 'vpt' )
2529	dopr_index(i) = 62
2530	dopr_unit(i) = 'K m/s'
2531	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2532
2533	CASE ( 'vpt_t' )
2534	dopr_index(i) = 63
2535	dopr_unit(i) = 'K m/s'
2536	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2537
2538	CASE ( 'rho' )
2539	IF ( .NOT. ocean ) THEN
2540	message_string = 'data_output_pr = ' // &
2541	TRIM( data_output_pr(i) ) // ' is not imp' // &
2542	'lemented for ocean = .FALSE.'
2543	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2544	ELSE
2545	dopr_index(i) = 64
2546	dopr_unit(i) = 'kg/m3'
2547	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2548	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2549	dopr_initial_index(i) = 77
2550	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
2551	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
2552	data_output_pr(i) = data_output_pr(i)(2:)
2553	ENDIF
2554	ENDIF
2555
2556	CASE ( 'w"sa"' )
2557	IF ( .NOT. ocean ) THEN
2558	message_string = 'data_output_pr = ' // &
2559	TRIM( data_output_pr(i) ) // ' is not imp' // &
2560	'lemented for ocean = .FALSE.'
2561	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2562	ELSE
2563	dopr_index(i) = 65
2564	dopr_unit(i) = 'psu m/s'
2565	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2566	ENDIF
2567
2568	CASE ( 'wsa' )
2569	IF ( .NOT. ocean ) THEN
2570	message_string = 'data_output_pr = ' // &
2571	TRIM( data_output_pr(i) ) // ' is not imp' // &
2572	'lemented for ocean = .FALSE.'
2573	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2574	ELSE
2575	dopr_index(i) = 66
2576	dopr_unit(i) = 'psu m/s'
2577	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2578	ENDIF
2579
2580	CASE ( 'wsa' )
2581	IF ( .NOT. ocean ) THEN
2582	message_string = 'data_output_pr = ' // &
2583	TRIM( data_output_pr(i) ) // ' is not imp' // &
2584	'lemented for ocean = .FALSE.'
2585	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2586	ELSE
2587	dopr_index(i) = 67
2588	dopr_unit(i) = 'psu m/s'
2589	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2590	ENDIF
2591
2592	CASE ( 'wp' )
2593	dopr_index(i) = 68
2594	dopr_unit(i) = 'm3/s3'
2595	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2596
2597	CASE ( 'w"e' )
2598	dopr_index(i) = 69
2599	dopr_unit(i) = 'm3/s3'
2600	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2601
2602	CASE ( 'q*2' )
2603	IF ( .NOT. humidity ) THEN
2604	message_string = 'data_output_pr = ' // &
2605	TRIM( data_output_pr(i) ) // ' is not imp' // &
2606	'lemented for humidity = .FALSE.'
2607	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2608	ELSE
2609	dopr_index(i) = 70
2610	dopr_unit(i) = 'kg2/kg2'
2611	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2612	ENDIF
2613
2614	CASE ( 'prho' )
2615	IF ( .NOT. ocean ) THEN
2616	message_string = 'data_output_pr = ' // &
2617	TRIM( data_output_pr(i) ) // ' is not imp' // &
2618	'lemented for ocean = .FALSE.'
2619	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2620	ELSE
2621	dopr_index(i) = 71
2622	dopr_unit(i) = 'kg/m3'
2623	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2624	ENDIF
2625
2626	CASE ( 'hyp' )
2627	dopr_index(i) = 72
2628	dopr_unit(i) = 'dbar'
2629	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2630
2631	CASE ( 'nr' )
2632	IF ( .NOT. cloud_physics ) THEN
2633	message_string = 'data_output_pr = ' // &
2634	TRIM( data_output_pr(i) ) // ' is not imp' // &
2635	'lemented for cloud_physics = .FALSE.'
2636	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2637	ELSEIF ( icloud_scheme /= 0 ) THEN
2638	message_string = 'data_output_pr = ' // &
2639	TRIM( data_output_pr(i) ) // ' is not imp' // &
2640	'lemented for cloud_scheme /= seifert_beheng'
2641	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2642	ELSEIF ( .NOT. precipitation ) THEN
2643	message_string = 'data_output_pr = ' // &
2644	TRIM( data_output_pr(i) ) // ' is not imp' // &
2645	'lemented for precipitation = .FALSE.'
2646	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2647	ELSE
2648	dopr_index(i) = 73
2649	dopr_unit(i) = '1/m3'
2650	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2651	ENDIF
2652
2653	CASE ( 'qr' )
2654	IF ( .NOT. cloud_physics ) THEN
2655	message_string = 'data_output_pr = ' // &
2656	TRIM( data_output_pr(i) ) // ' is not imp' // &
2657	'lemented for cloud_physics = .FALSE.'
2658	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2659	ELSEIF ( icloud_scheme /= 0 ) THEN
2660	message_string = 'data_output_pr = ' // &
2661	TRIM( data_output_pr(i) ) // ' is not imp' // &
2662	'lemented for cloud_scheme /= seifert_beheng'
2663	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2664	ELSEIF ( .NOT. precipitation ) THEN
2665	message_string = 'data_output_pr = ' // &
2666	TRIM( data_output_pr(i) ) // ' is not imp' // &
2667	'lemented for precipitation = .FALSE.'
2668	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2669	ELSE
2670	dopr_index(i) = 74
2671	dopr_unit(i) = 'kg/kg'
2672	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2673	ENDIF
2674
2675	CASE ( 'qc' )
2676	IF ( .NOT. cloud_physics ) THEN
2677	message_string = 'data_output_pr = ' // &
2678	TRIM( data_output_pr(i) ) // ' is not imp' // &
2679	'lemented for cloud_physics = .FALSE.'
2680	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2681	ELSEIF ( icloud_scheme /= 0 ) THEN
2682	message_string = 'data_output_pr = ' // &
2683	TRIM( data_output_pr(i) ) // ' is not imp' // &
2684	'lemented for cloud_scheme /= seifert_beheng'
2685	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2686	ELSE
2687	dopr_index(i) = 75
2688	dopr_unit(i) = 'kg/kg'
2689	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2690	ENDIF
2691
2692	CASE ( 'prr' )
2693	IF ( .NOT. cloud_physics ) THEN
2694	message_string = 'data_output_pr = ' // &
2695	TRIM( data_output_pr(i) ) // ' is not imp' // &
2696	'lemented for cloud_physics = .FALSE.'
2697	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2698	ELSEIF ( icloud_scheme /= 0 ) THEN
2699	message_string = 'data_output_pr = ' // &
2700	TRIM( data_output_pr(i) ) // ' is not imp' // &
2701	'lemented for cloud_scheme /= seifert_beheng'
2702	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2703	ELSEIF ( .NOT. precipitation ) THEN
2704	message_string = 'data_output_pr = ' // &
2705	TRIM( data_output_pr(i) ) // ' is not imp' // &
2706	'lemented for precipitation = .FALSE.'
2707	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2708
2709	ELSE
2710	dopr_index(i) = 76
2711	dopr_unit(i) = 'kg/kg m/s'
2712	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2713	ENDIF
2714
2715	CASE ( 'ug' )
2716	dopr_index(i) = 78
2717	dopr_unit(i) = 'm/s'
2718	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
2719
2720	CASE ( 'vg' )
2721	dopr_index(i) = 79
2722	dopr_unit(i) = 'm/s'
2723	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
2724
2725	CASE DEFAULT
2726
2727	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2728
2729	IF ( unit == 'illegal' ) THEN
2730	IF ( data_output_pr_user(1) /= ' ' ) THEN
2731	message_string = 'illegal value for data_output_pr or ' // &
2732	'data_output_pr_user = "' // &
2733	TRIM( data_output_pr(i) ) // '"'
2734	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2735	ELSE
2736	message_string = 'illegal value for data_output_pr = "' // &
2737	TRIM( data_output_pr(i) ) // '"'
2738	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2739	ENDIF
2740	ENDIF
2741
2742	END SELECT
2743
2744	ENDDO
2745
2746
2747	!
2748	!-- Append user-defined data output variables to the standard data output
2749	IF ( data_output_user(1) /= ' ' ) THEN
2750	i = 1
2751	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2752	i = i + 1
2753	ENDDO
2754	j = 1
2755	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2756	IF ( i > 100 ) THEN
2757	message_string = 'number of output quantitities given by data' // &
2758	'_output and data_output_user exceeds the limit of 100'
2759	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2760	ENDIF
2761	data_output(i) = data_output_user(j)
2762	i = i + 1
2763	j = j + 1
2764	ENDDO
2765	ENDIF
2766
2767	!
2768	!-- Check and set steering parameters for 2d/3d data output and averaging
2769	i = 1
2770	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2771	!
2772	!-- Check for data averaging
2773	ilen = LEN_TRIM( data_output(i) )
2774	j = 0 ! no data averaging
2775	IF ( ilen > 3 ) THEN
2776	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2777	j = 1 ! data averaging
2778	data_output(i) = data_output(i)(1:ilen-3)
2779	ENDIF
2780	ENDIF
2781	!
2782	!-- Check for cross section or volume data
2783	ilen = LEN_TRIM( data_output(i) )
2784	k = 0 ! 3d data
2785	var = data_output(i)(1:ilen)
2786	IF ( ilen > 3 ) THEN
2787	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2788	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2789	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2790	k = 1 ! 2d data
2791	var = data_output(i)(1:ilen-3)
2792	ENDIF
2793	ENDIF
2794	!
2795	!-- Check for allowed value and set units
2796	SELECT CASE ( TRIM( var ) )
2797
2798	CASE ( 'e' )
2799	IF ( constant_diffusion ) THEN
2800	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2801	'res constant_diffusion = .FALSE.'
2802	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2803	ENDIF
2804	unit = 'm2/s2'
2805
2806	CASE ( 'lpt' )
2807	IF ( .NOT. cloud_physics ) THEN
2808	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2809	'res cloud_physics = .TRUE.'
2810	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2811	ENDIF
2812	unit = 'K'
2813
2814	CASE ( 'nr' )
2815	IF ( .NOT. cloud_physics ) THEN
2816	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2817	'res cloud_physics = .TRUE.'
2818	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2819	ELSEIF ( icloud_scheme /= 0 ) THEN
2820	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2821	'res cloud_scheme = seifert_beheng'
2822	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2823	ENDIF
2824	unit = '1/m3'
2825
2826	CASE ( 'pc', 'pr' )
2827	IF ( .NOT. particle_advection ) THEN
2828	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2829	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2830	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2831	ENDIF
2832	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2833	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2834
2835	CASE ( 'prr' )
2836	IF ( .NOT. cloud_physics ) THEN
2837	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2838	'res cloud_physics = .TRUE.'
2839	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2840	ELSEIF ( icloud_scheme /= 0 ) THEN
2841	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2842	'res cloud_scheme = seifert_beheng'
2843	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2844	ELSEIF ( .NOT. precipitation ) THEN
2845	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2846	'res precipitation = .TRUE.'
2847	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2848	ENDIF
2849	unit = 'kg/kg m/s'
2850
2851	CASE ( 'q', 'vpt' )
2852	IF ( .NOT. humidity ) THEN
2853	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2854	'res humidity = .TRUE.'
2855	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2856	ENDIF
2857	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2858	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2859
2860	CASE ( 'qc' )
2861	IF ( .NOT. cloud_physics ) THEN
2862	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2863	'res cloud_physics = .TRUE.'
2864	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2865	ELSEIF ( icloud_scheme /= 0 ) THEN
2866	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2867	'res cloud_scheme = seifert_beheng'
2868	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2869	ENDIF
2870	unit = 'kg/kg'
2871
2872	CASE ( 'ql' )
2873	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2874	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2875	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2876	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2877	ENDIF
2878	unit = 'kg/kg'
2879
2880	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2881	IF ( .NOT. cloud_droplets ) THEN
2882	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2883	'res cloud_droplets = .TRUE.'
2884	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2885	ENDIF
2886	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2887	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2888	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2889
2890	CASE ( 'qr' )
2891	IF ( .NOT. cloud_physics ) THEN
2892	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2893	'res cloud_physics = .TRUE.'
2894	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2895	ELSEIF ( icloud_scheme /= 0 ) THEN
2896	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2897	'res cloud_scheme = seifert_beheng'
2898	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2899	ELSEIF ( .NOT. precipitation ) THEN
2900	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2901	'res precipitation = .TRUE.'
2902	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2903	ENDIF
2904	unit = 'kg/kg'
2905
2906	CASE ( 'qv' )
2907	IF ( .NOT. cloud_physics ) THEN
2908	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2909	'res cloud_physics = .TRUE.'
2910	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2911	ENDIF
2912	unit = 'kg/kg'
2913
2914	CASE ( 'rho' )
2915	IF ( .NOT. ocean ) THEN
2916	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2917	'res ocean = .TRUE.'
2918	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2919	ENDIF
2920	unit = 'kg/m3'
2921
2922	CASE ( 's' )
2923	IF ( .NOT. passive_scalar ) THEN
2924	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2925	'res passive_scalar = .TRUE.'
2926	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2927	ENDIF
2928	unit = 'conc'
2929
2930	CASE ( 'sa' )
2931	IF ( .NOT. ocean ) THEN
2932	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2933	'res ocean = .TRUE.'
2934	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2935	ENDIF
2936	unit = 'psu'
2937
2938	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2939	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2940	message_string = 'illegal value for data_output: "' // &
2941	TRIM( var ) // '" & only 2d-horizontal ' // &
2942	'cross sections are allowed for this value'
2943	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2944	ENDIF
2945	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2946	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2947	'res cloud_physics = .TRUE.'
2948	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2949	ENDIF
2950	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2951	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2952	'res precipitation = .TRUE.'
2953	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2954	ENDIF
2955	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2956	message_string = 'temporal averaging of precipitation ' // &
2957	'amount "' // TRIM( var ) // '" is not possible'
2958	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2959	ENDIF
2960	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2961	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2962	'res precipitation = .TRUE.'
2963	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2964	ENDIF
2965	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2966	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2967	'res humidity = .TRUE.'
2968	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2969	ENDIF
2970
2971	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2972	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2973	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2974	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2975	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2976	IF ( TRIM( var ) == 't*' ) unit = 'K'
2977	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2978	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2979	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2980
2981
2982	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2983	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2984	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2985	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2986	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2987	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2988	CONTINUE
2989
2990	CASE DEFAULT
2991	CALL user_check_data_output( var, unit )
2992
2993	IF ( unit == 'illegal' ) THEN
2994	IF ( data_output_user(1) /= ' ' ) THEN
2995	message_string = 'illegal value for data_output or ' // &
2996	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2997	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2998	ELSE
2999	message_string = 'illegal value for data_output =' // &
3000	TRIM( data_output(i) ) // '"'
3001	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
3002	ENDIF
3003	ENDIF
3004
3005	END SELECT
3006	!
3007	!-- Set the internal steering parameters appropriately
3008	IF ( k == 0 ) THEN
3009	do3d_no(j) = do3d_no(j) + 1
3010	do3d(j,do3d_no(j)) = data_output(i)
3011	do3d_unit(j,do3d_no(j)) = unit
3012	ELSE
3013	do2d_no(j) = do2d_no(j) + 1
3014	do2d(j,do2d_no(j)) = data_output(i)
3015	do2d_unit(j,do2d_no(j)) = unit
3016	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
3017	data_output_xy(j) = .TRUE.
3018	ENDIF
3019	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
3020	data_output_xz(j) = .TRUE.
3021	ENDIF
3022	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3023	data_output_yz(j) = .TRUE.
3024	ENDIF
3025	ENDIF
3026
3027	IF ( j == 1 ) THEN
3028	!
3029	!-- Check, if variable is already subject to averaging
3030	found = .FALSE.
3031	DO k = 1, doav_n
3032	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
3033	ENDDO
3034
3035	IF ( .NOT. found ) THEN
3036	doav_n = doav_n + 1
3037	doav(doav_n) = var
3038	ENDIF
3039	ENDIF
3040
3041	i = i + 1
3042	ENDDO
3043
3044	!
3045	!-- Averaged 2d or 3d output requires that an averaging interval has been set
3046	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
3047	WRITE( message_string, * ) 'output of averaged quantity "', &
3048	TRIM( doav(1) ), '_av" requires to set a ', &
3049	'non-zero & averaging interval'
3050	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
3051	ENDIF
3052
3053	!
3054	!-- Check sectional planes and store them in one shared array
3055	IF ( ANY( section_xy > nz + 1 ) ) THEN
3056	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3057	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3058	ENDIF
3059	IF ( ANY( section_xz > ny + 1 ) ) THEN
3060	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3061	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3062	ENDIF
3063	IF ( ANY( section_yz > nx + 1 ) ) THEN
3064	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3065	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3066	ENDIF
3067	section(:,1) = section_xy
3068	section(:,2) = section_xz
3069	section(:,3) = section_yz
3070
3071	!
3072	!-- Upper plot limit for 2D vertical sections
3073	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
3074	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3075	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3076	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3077	' (zu(nzt))'
3078	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3079	ENDIF
3080
3081	!
3082	!-- Upper plot limit for 3D arrays
3083	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3084
3085	!
3086	!-- Determine and check accuracy for compressed 3D plot output
3087	IF ( do3d_compress ) THEN
3088	!
3089	!-- Compression only permissible on T3E machines
3090	IF ( host(1:3) /= 't3e' ) THEN
3091	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3092	TRIM( host ) // '"'
3093	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3094	ENDIF
3095
3096	i = 1
3097	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3098
3099	ilen = LEN_TRIM( do3d_comp_prec(i) )
3100	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3101	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3102	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3103	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3104	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3105	ENDIF
3106
3107	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3108	var = do3d_comp_prec(i)(1:ilen-1)
3109
3110	SELECT CASE ( var )
3111
3112	CASE ( 'u' )
3113	j = 1
3114	CASE ( 'v' )
3115	j = 2
3116	CASE ( 'w' )
3117	j = 3
3118	CASE ( 'p' )
3119	j = 4
3120	CASE ( 'pt' )
3121	j = 5
3122
3123	CASE DEFAULT
3124	WRITE( message_string, * ) 'unknown variable "', &
3125	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3126	i, ')'
3127	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3128
3129	END SELECT
3130
3131	plot_3d_precision(j)%precision = prec
3132	i = i + 1
3133
3134	ENDDO
3135	ENDIF
3136
3137	!
3138	!-- Check the data output format(s)
3139	IF ( data_output_format(1) == ' ' ) THEN
3140	!
3141	!-- Default value
3142	netcdf_output = .TRUE.
3143	ELSE
3144	i = 1
3145	DO WHILE ( data_output_format(i) /= ' ' )
3146
3147	SELECT CASE ( data_output_format(i) )
3148
3149	CASE ( 'netcdf' )
3150	netcdf_output = .TRUE.
3151	CASE ( 'iso2d' )
3152	iso2d_output = .TRUE.
3153	CASE ( 'avs' )
3154	avs_output = .TRUE.
3155
3156	CASE DEFAULT
3157	message_string = 'unknown value for data_output_format "' // &
3158	TRIM( data_output_format(i) ) // '"'
3159	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3160
3161	END SELECT
3162
3163	i = i + 1
3164	IF ( i > 10 ) EXIT
3165
3166	ENDDO
3167	ENDIF
3168
3169	!
3170	!-- Set output format string (used in header)
3171	IF ( netcdf_output ) THEN
3172
3173	SELECT CASE ( netcdf_data_format )
3174	CASE ( 1 )
3175	output_format_netcdf = 'netCDF classic'
3176	CASE ( 2 )
3177	output_format_netcdf = 'netCDF 64bit offset'
3178	CASE ( 3 )
3179	output_format_netcdf = 'netCDF4/HDF5'
3180	CASE ( 4 )
3181	output_format_netcdf = 'netCDF4/HDF5 classic'
3182	CASE ( 5 )
3183	output_format_netcdf = 'parallel netCDF4/HDF5'
3184	CASE ( 6 )
3185	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3186
3187	END SELECT
3188
3189	ENDIF
3190
3191	#if defined( __spectra )
3192	!
3193	!-- Check the number of spectra level to be output
3194	i = 1
3195	DO WHILE ( comp_spectra_level(i) /= 999999 .AND. i <= 100 )
3196	i = i + 1
3197	ENDDO
3198	i = i - 1
3199	IF ( i == 0 ) THEN
3200	WRITE( message_string, * ) 'no spectra levels given'
3201	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
3202	ENDIF
3203	#endif
3204
3205	!
3206	!-- Check mask conditions
3207	DO mid = 1, max_masks
3208	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3209	data_output_masks_user(mid,1) /= ' ' ) THEN
3210	masks = masks + 1
3211	ENDIF
3212	ENDDO
3213
3214	IF ( masks < 0 .OR. masks > max_masks ) THEN
3215	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3216	'<= ', max_masks, ' (=max_masks)'
3217	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3218	ENDIF
3219	IF ( masks > 0 ) THEN
3220	mask_scale(1) = mask_scale_x
3221	mask_scale(2) = mask_scale_y
3222	mask_scale(3) = mask_scale_z
3223	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3224	WRITE( message_string, * ) &
3225	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3226	'must be > 0.0'
3227	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3228	ENDIF
3229	!
3230	!-- Generate masks for masked data output
3231	CALL init_masks
3232	ENDIF
3233
3234	!
3235	!-- Check the NetCDF data format
3236	#if ! defined ( __check )
3237	IF ( netcdf_data_format > 2 ) THEN
3238	#if defined( __netcdf4 )
3239	CONTINUE
3240	#else
3241	message_string = 'netCDF: netCDF4 format requested but no ' // &
3242	'cpp-directive __netcdf4 given & switch ' // &
3243	'back to 64-bit offset format'
3244	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3245	netcdf_data_format = 2
3246	#endif
3247	ENDIF
3248	IF ( netcdf_data_format > 4 ) THEN
3249	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3250	CONTINUE
3251	#else
3252	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3253	'cpp-directive __netcdf4_parallel given & switch ' // &
3254	'back to netCDF4 non-parallel output'
3255	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3256	netcdf_data_format = netcdf_data_format - 2
3257	#endif
3258	ENDIF
3259	#endif
3260
3261	#if ! defined( __check )
3262	!
3263	!-- Check netcdf precison
3264	ldum = .FALSE.
3265	CALL define_netcdf_header( 'ch', ldum, 0 )
3266	#endif
3267	!
3268	!-- Check, whether a constant diffusion coefficient shall be used
3269	IF ( km_constant /= -1.0 ) THEN
3270	IF ( km_constant < 0.0 ) THEN
3271	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3272	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3273	ELSE
3274	IF ( prandtl_number < 0.0 ) THEN
3275	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3276	' < 0.0'
3277	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3278	ENDIF
3279	constant_diffusion = .TRUE.
3280
3281	IF ( prandtl_layer ) THEN
3282	message_string = 'prandtl_layer is not allowed with fixed ' // &
3283	'value of km'
3284	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3285	ENDIF
3286	ENDIF
3287	ENDIF
3288
3289	!
3290	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3291	!-- potential temperature, check the width of the damping layer
3292	IF ( bc_lr /= 'cyclic' ) THEN
3293	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3294	message_string = 'pt_damping_width out of range'
3295	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3296	ENDIF
3297	ENDIF
3298
3299	IF ( bc_ns /= 'cyclic' ) THEN
3300	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3301	message_string = 'pt_damping_width out of range'
3302	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3303	ENDIF
3304	ENDIF
3305
3306	!
3307	!-- Check value range for rif
3308	IF ( rif_min >= rif_max ) THEN
3309	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3310	'than rif_max = ', rif_max
3311	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3312	ENDIF
3313
3314	!
3315	!-- Determine upper and lower hight level indices for random perturbations
3316	IF ( disturbance_level_b == -9999999.9 ) THEN
3317	IF ( ocean ) THEN
3318	disturbance_level_b = zu((nzt*2)/3)
3319	disturbance_level_ind_b = ( nzt * 2 ) / 3
3320	ELSE
3321	disturbance_level_b = zu(nzb+3)
3322	disturbance_level_ind_b = nzb + 3
3323	ENDIF
3324	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3325	WRITE( message_string, * ) 'disturbance_level_b = ', &
3326	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3327	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3328	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3329	WRITE( message_string, * ) 'disturbance_level_b = ', &
3330	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3331	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3332	ELSE
3333	DO k = 3, nzt-2
3334	IF ( disturbance_level_b <= zu(k) ) THEN
3335	disturbance_level_ind_b = k
3336	EXIT
3337	ENDIF
3338	ENDDO
3339	ENDIF
3340
3341	IF ( disturbance_level_t == -9999999.9 ) THEN
3342	IF ( ocean ) THEN
3343	disturbance_level_t = zu(nzt-3)
3344	disturbance_level_ind_t = nzt - 3
3345	ELSE
3346	disturbance_level_t = zu(nzt/3)
3347	disturbance_level_ind_t = nzt / 3
3348	ENDIF
3349	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3350	WRITE( message_string, * ) 'disturbance_level_t = ', &
3351	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3352	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3353	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3354	WRITE( message_string, * ) 'disturbance_level_t = ', &
3355	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3356	disturbance_level_b
3357	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3358	ELSE
3359	DO k = 3, nzt-2
3360	IF ( disturbance_level_t <= zu(k) ) THEN
3361	disturbance_level_ind_t = k
3362	EXIT
3363	ENDIF
3364	ENDDO
3365	ENDIF
3366
3367	!
3368	!-- Check again whether the levels determined this way are ok.
3369	!-- Error may occur at automatic determination and too few grid points in
3370	!-- z-direction.
3371	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3372	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3373	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3374	disturbance_level_b
3375	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3376	ENDIF
3377
3378	!
3379	!-- Determine the horizontal index range for random perturbations.
3380	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3381	!-- near the inflow and the perturbation area is further limited to ...(1)
3382	!-- after the initial phase of the flow.
3383	dist_nxl = 0; dist_nxr = nx
3384	dist_nys = 0; dist_nyn = ny
3385	IF ( bc_lr /= 'cyclic' ) THEN
3386	IF ( inflow_disturbance_begin == -1 ) THEN
3387	inflow_disturbance_begin = MIN( 10, nx/2 )
3388	ENDIF
3389	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3390	THEN
3391	message_string = 'inflow_disturbance_begin out of range'
3392	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3393	ENDIF
3394	IF ( inflow_disturbance_end == -1 ) THEN
3395	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3396	ENDIF
3397	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3398	THEN
3399	message_string = 'inflow_disturbance_end out of range'
3400	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3401	ENDIF
3402	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3403	IF ( inflow_disturbance_begin == -1 ) THEN
3404	inflow_disturbance_begin = MIN( 10, ny/2 )
3405	ENDIF
3406	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3407	THEN
3408	message_string = 'inflow_disturbance_begin out of range'
3409	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3410	ENDIF
3411	IF ( inflow_disturbance_end == -1 ) THEN
3412	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3413	ENDIF
3414	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3415	THEN
3416	message_string = 'inflow_disturbance_end out of range'
3417	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3418	ENDIF
3419	ENDIF
3420
3421	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3422	dist_nxr = nx - inflow_disturbance_begin
3423	dist_nxl(1) = nx - inflow_disturbance_end
3424	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3425	dist_nxl = inflow_disturbance_begin
3426	dist_nxr(1) = inflow_disturbance_end
3427	ENDIF
3428	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3429	dist_nyn = ny - inflow_disturbance_begin
3430	dist_nys(1) = ny - inflow_disturbance_end
3431	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3432	dist_nys = inflow_disturbance_begin
3433	dist_nyn(1) = inflow_disturbance_end
3434	ENDIF
3435
3436	!
3437	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3438	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3439	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3440	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3441	'condition at the inflow boundary'
3442	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3443	ENDIF
3444
3445	!
3446	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3447	!-- data from prerun in the first main run
3448	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3449	initializing_actions /= 'read_restart_data' ) THEN
3450	message_string = 'turbulent_inflow = .T. requires ' // &
3451	'initializing_actions = ''cyclic_fill'' '
3452	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3453	ENDIF
3454
3455	!
3456	!-- In case of turbulent inflow calculate the index of the recycling plane
3457	IF ( turbulent_inflow ) THEN
3458	IF ( recycling_width == 9999999.9 ) THEN
3459	!
3460	!-- Set the default value for the width of the recycling domain
3461	recycling_width = 0.1 * nx * dx
3462	ELSE
3463	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3464	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3465	' ', recycling_width
3466	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3467	ENDIF
3468	ENDIF
3469	!
3470	!-- Calculate the index
3471	recycling_plane = recycling_width / dx
3472	ENDIF
3473
3474	!
3475	!-- Check random generator
3476	IF ( random_generator /= 'system-specific' .AND. &
3477	random_generator /= 'numerical-recipes' ) THEN
3478	message_string = 'unknown random generator: random_generator = "' // &
3479	TRIM( random_generator ) // '"'
3480	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3481	ENDIF
3482
3483	!
3484	!-- Determine damping level index for 1D model
3485	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3486	IF ( damp_level_1d == -1.0 ) THEN
3487	damp_level_1d = zu(nzt+1)
3488	damp_level_ind_1d = nzt + 1
3489	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3490	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3491	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3492	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3493	ELSE
3494	DO k = 1, nzt+1
3495	IF ( damp_level_1d <= zu(k) ) THEN
3496	damp_level_ind_1d = k
3497	EXIT
3498	ENDIF
3499	ENDDO
3500	ENDIF
3501	ENDIF
3502
3503	!
3504	!-- Check some other 1d-model parameters
3505	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3506	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3507	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3508	'" is unknown'
3509	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3510	ENDIF
3511	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3512	TRIM( dissipation_1d ) /= 'detering' ) THEN
3513	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3514	'" is unknown'
3515	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3516	ENDIF
3517
3518	!
3519	!-- Set time for the next user defined restart (time_restart is the
3520	!-- internal parameter for steering restart events)
3521	IF ( restart_time /= 9999999.9 ) THEN
3522	IF ( restart_time > time_since_reference_point ) THEN
3523	time_restart = restart_time
3524	ENDIF
3525	ELSE
3526	!
3527	!-- In case of a restart run, set internal parameter to default (no restart)
3528	!-- if the NAMELIST-parameter restart_time is omitted
3529	time_restart = 9999999.9
3530	ENDIF
3531
3532	!
3533	!-- Set default value of the time needed to terminate a model run
3534	IF ( termination_time_needed == -1.0 ) THEN
3535	IF ( host(1:3) == 'ibm' ) THEN
3536	termination_time_needed = 300.0
3537	ELSE
3538	termination_time_needed = 35.0
3539	ENDIF
3540	ENDIF
3541
3542	!
3543	!-- Check the time needed to terminate a model run
3544	IF ( host(1:3) == 't3e' ) THEN
3545	!
3546	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3547	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3548	IF ( termination_time_needed <= 30.0 ) THEN
3549	WRITE( message_string, * ) 'termination_time_needed = ', &
3550	termination_time_needed, ' must be > 30.0 on host "', &
3551	TRIM( host ), '"'
3552	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3553	ENDIF
3554	ELSEIF ( host(1:3) == 'ibm' ) THEN
3555	!
3556	!-- On IBM-regatta machines the time should be at least 300 seconds,
3557	!-- because the job time consumed before executing palm (for compiling,
3558	!-- copying of files, etc.) has to be regarded
3559	IF ( termination_time_needed < 300.0 ) THEN
3560	WRITE( message_string, * ) 'termination_time_needed = ', &
3561	termination_time_needed, ' should be >= 300.0 on host "', &
3562	TRIM( host ), '"'
3563	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3564	ENDIF
3565	ENDIF
3566
3567	!
3568	!-- Check pressure gradient conditions
3569	IF ( dp_external .AND. conserve_volume_flow ) THEN
3570	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3571	'w are .TRUE. but one of them must be .FALSE.'
3572	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3573	ENDIF
3574	IF ( dp_external ) THEN
3575	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3576	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3577	' of range'
3578	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3579	ENDIF
3580	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3581	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3582	'ro, i.e. the external pressure gradient & will not be applied'
3583	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3584	ENDIF
3585	ENDIF
3586	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3587	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3588	'.FALSE., i.e. the external pressure gradient & will not be applied'
3589	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3590	ENDIF
3591	IF ( conserve_volume_flow ) THEN
3592	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3593
3594	conserve_volume_flow_mode = 'initial_profiles'
3595
3596	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3597	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3598	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3599	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3600	conserve_volume_flow_mode
3601	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3602	ENDIF
3603	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3604	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3605	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3606	'require conserve_volume_flow_mode = ''initial_profiles'''
3607	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3608	ENDIF
3609	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3610	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3611	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3612	'require conserve_volume_flow_mode = ''initial_profiles''', &
3613	' or ''bulk_velocity'''
3614	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3615	ENDIF
3616	ENDIF
3617	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3618	( .NOT. conserve_volume_flow .OR. &
3619	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3620	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3621	'conserve_volume_flow = .T. and ', &
3622	'conserve_volume_flow_mode = ''bulk_velocity'''
3623	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3624	ENDIF
3625
3626	!
3627	!-- Check particle attributes
3628	IF ( particle_color /= 'none' ) THEN
3629	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3630	particle_color /= 'z' ) THEN
3631	message_string = 'illegal value for parameter particle_color: ' // &
3632	TRIM( particle_color)
3633	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3634	ELSE
3635	IF ( color_interval(2) <= color_interval(1) ) THEN
3636	message_string = 'color_interval(2) <= color_interval(1)'
3637	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3638	ENDIF
3639	ENDIF
3640	ENDIF
3641
3642	IF ( particle_dvrpsize /= 'none' ) THEN
3643	IF ( particle_dvrpsize /= 'absw' ) THEN
3644	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3645	' ' // TRIM( particle_color)
3646	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3647	ELSE
3648	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3649	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3650	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3651	ENDIF
3652	ENDIF
3653	ENDIF
3654
3655	!
3656	!-- Check nudging and large scale forcing from external file
3657	IF ( nudging .AND. ( .NOT. large_scale_forcing ) ) THEN
3658	message_string = 'Nudging requires large_scale_forcing = .T.. &'// &
3659	'Surface fluxes and geostrophic wind should be &'// &
3660	'prescribed in file LSF_DATA'
3661	CALL message( 'check_parameters', 'PA0374', 1, 2, 0, 6, 0 )
3662	ENDIF
3663
3664	IF ( large_scale_forcing .AND. ( bc_lr /= 'cyclic' .OR. &
3665	bc_ns /= 'cyclic' ) ) THEN
3666	message_string = 'Non-cyclic lateral boundaries do not allow for &' // &
3667	'the usage of large scale forcing from external file.'
3668	CALL message( 'check_parameters', 'PA0375', 1, 2, 0, 6, 0 )
3669	ENDIF
3670
3671	IF ( large_scale_forcing .AND. ( .NOT. humidity ) ) THEN
3672	message_string = 'The usage of large scale forcing from external &'//&
3673	'file LSF_DATA requires humidity = .T..'
3674	CALL message( 'check_parameters', 'PA0376', 1, 2, 0, 6, 0 )
3675	ENDIF
3676
3677	IF ( large_scale_forcing .AND. topography /= 'flat' ) THEN
3678	message_string = 'The usage of large scale forcing from external &'//&
3679	'file LSF_DATA is not implemented for non-flat topography'
3680	CALL message( 'check_parameters', 'PA0377', 1, 2, 0, 6, 0 )
3681	ENDIF
3682
3683	IF ( large_scale_forcing .AND. ocean ) THEN
3684	message_string = 'The usage of large scale forcing from external &'//&
3685	'file LSF_DATA is not implemented for ocean runs'
3686	CALL message( 'check_parameters', 'PA0378', 1, 2, 0, 6, 0 )
3687	ENDIF
3688	!
3689	!-- Check &userpar parameters
3690	CALL user_check_parameters
3691
3692
3693
3694	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |