Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1217

Last change on this file since 1217 was 1217, checked in by raasch, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 139.9 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1217 2013-08-26 11:30:05Z raasch $
27	!
28	! 1216 2013-08-26 09:31:42Z raasch
29	! check for transpose_compute_overlap (temporary)
30	!
31	! 1214 2013-08-21 12:29:17Z kanani
32	! additional check for simultaneous use of vertical grid stretching
33	! and particle advection
34	!
35	! 1212 2013-08-15 08:46:27Z raasch
36	! checks for poisfft_hybrid removed
37	!
38	! 1210 2013-08-14 10:58:20Z raasch
39	! check for fftw
40	!
41	! 1179 2013-06-14 05:57:58Z raasch
42	! checks and settings of buoyancy parameters and switches revised,
43	! initial profile for rho added to hom (id=77)
44	!
45	! 1174 2013-05-31 10:28:08Z gryschka
46	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
47	!
48	! 1159 2013-05-21 11:58:22Z fricke
49	! bc_lr/ns_dirneu/neudir removed
50	!
51	! 1115 2013-03-26 18:16:16Z hoffmann
52	! unused variables removed
53	! drizzle can be used without precipitation
54	!
55	! 1111 2013-03-08 23:54:10Z raasch
56	! ibc_p_b = 2 removed
57	!
58	! 1103 2013-02-20 02:15:53Z raasch
59	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
60	!
61	! 1092 2013-02-02 11:24:22Z raasch
62	! unused variables removed
63	!
64	! 1069 2012-11-28 16:18:43Z maronga
65	! allow usage of topography in combination with cloud physics
66	!
67	! 1065 2012-11-22 17:42:36Z hoffmann
68	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
69	! precipitation in order to save computational resources.
70	!
71	! 1060 2012-11-21 07:19:51Z raasch
72	! additional check for parameter turbulent_inflow
73	!
74	! 1053 2012-11-13 17:11:03Z hoffmann
75	! necessary changes for the new two-moment cloud physics scheme added:
76	! - check cloud physics scheme (Kessler or Seifert and Beheng)
77	! - plant_canopy is not allowed
78	! - currently, only cache loop_optimization is allowed
79	! - initial profiles of nr, qr
80	! - boundary condition of nr, qr
81	! - check output quantities (qr, nr, prr)
82	!
83	! 1036 2012-10-22 13:43:42Z raasch
84	! code put under GPL (PALM 3.9)
85	!
86	! 1031/1034 2012-10-22 11:32:49Z raasch
87	! check of netcdf4 parallel file support
88	!
89	! 1019 2012-09-28 06:46:45Z raasch
90	! non-optimized version of prognostic_equations not allowed any more
91	!
92	! 1015 2012-09-27 09:23:24Z raasch
93	! acc allowed for loop optimization,
94	! checks for adjustment of mixing length to the Prandtl mixing length removed
95	!
96	! 1003 2012-09-14 14:35:53Z raasch
97	! checks for cases with unequal subdomain sizes removed
98	!
99	! 1001 2012-09-13 14:08:46Z raasch
100	! all actions concerning leapfrog- and upstream-spline-scheme removed
101	!
102	! 996 2012-09-07 10:41:47Z raasch
103	! little reformatting
104
105	! 978 2012-08-09 08:28:32Z fricke
106	! setting of bc_lr/ns_dirneu/neudir
107	! outflow damping layer removed
108	! check for z0h*
109	! check for pt_damping_width
110	!
111	! 964 2012-07-26 09:14:24Z raasch
112	! check of old profil-parameters removed
113	!
114	! 940 2012-07-09 14:31:00Z raasch
115	! checks for parameter neutral
116	!
117	! 924 2012-06-06 07:44:41Z maronga
118	! Bugfix: preprocessor directives caused error during compilation
119	!
120	! 892 2012-05-02 13:51:44Z maronga
121	! Bugfix for parameter file check ( excluding __netcdf4 )
122	!
123	! 866 2012-03-28 06:44:41Z raasch
124	! use only 60% of the geostrophic wind as translation speed in case of Galilean
125	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
126	! timestep
127	!
128	! 861 2012-03-26 14:18:34Z suehring
129	! Check for topography and ws-scheme removed.
130	! Check for loop_optimization = 'vector' and ws-scheme removed.
131	!
132	! 845 2012-03-07 10:23:05Z maronga
133	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
134	!
135	! 828 2012-02-21 12:00:36Z raasch
136	! check of collision_kernel extended
137	!
138	! 825 2012-02-19 03:03:44Z raasch
139	! check for collision_kernel and curvature_solution_effects
140	!
141	! 809 2012-01-30 13:32:58Z maronga
142	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
143	!
144	! 807 2012-01-25 11:53:51Z maronga
145	! New cpp directive "__check" implemented which is used by check_namelist_files
146	!
147	! 774 2011-10-27 13:34:16Z letzel
148	! bugfix for prescribed u,v-profiles
149	!
150	! 767 2011-10-14 06:39:12Z raasch
151	! Calculating u,v-profiles from given profiles by linear interpolation.
152	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
153	!
154	! 707 2011-03-29 11:39:40Z raasch
155	! setting of bc_lr/ns_dirrad/raddir
156	!
157	! 689 2011-02-20 19:31:12z gryschka
158	! Bugfix for some logical expressions
159	! (syntax was not compatible with all compilers)
160	!
161	! 680 2011-02-04 23:16:06Z gryschka
162	! init_vortex is not allowed with volume_flow_control
163	!
164	! 673 2011-01-18 16:19:48Z suehring
165	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
166	!
167	! 667 2010-12-23 12:06:00Z suehring/gryschka
168	! Exchange of parameters between ocean and atmosphere via PE0
169	! Check for illegal combination of ws-scheme and timestep scheme.
170	! Check for topography and ws-scheme.
171	! Check for not cyclic boundary conditions in combination with ws-scheme and
172	! loop_optimization = 'vector'.
173	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
174	! Different processor/grid topology in atmosphere and ocean is now allowed!
175	! Bugfixes in checking for conserve_volume_flow_mode
176	! 600 2010-11-24 16:10:51Z raasch
177	! change due to new default value of surface_waterflux
178	! 580 2010-10-05 13:59:11Z heinze
179	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
180	!
181	! 567 2010-10-01 10:46:30Z helmke
182	! calculating masks changed
183	!
184	! 564 2010-09-30 13:18:59Z helmke
185	! palm message identifiers of masked output changed, 20 replaced by max_masks
186	!
187	! 553 2010-09-01 14:09:06Z weinreis
188	! masks is calculated and removed from inipar
189	!
190	! 531 2010-04-21 06:47:21Z heinze
191	! Bugfix: unit of hyp changed to dbar
192	!
193	! 524 2010-03-30 02:04:51Z raasch
194	! Bugfix: "/" in netcdf profile variable names replaced by ":"
195	!
196	! 493 2010-03-01 08:30:24Z raasch
197	! netcdf_data_format is checked
198	!
199	! 411 2009-12-11 14:15:58Z heinze
200	! Enabled passive scalar/humidity wall fluxes for non-flat topography
201	! Initialization of large scale vertical motion (subsidence/ascent)
202	!
203	! 410 2009-12-04 17:05:40Z letzel
204	! masked data output
205	!
206	! 388 2009-09-23 09:40:33Z raasch
207	! Check profiles fpr prho and hyp.
208	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
209	! interval has been set, respective error message is included
210	! bc_lr_cyc and bc_ns_cyc are set,
211	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
212	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
213	! Coupling with independent precursor runs.
214	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
215	! Bugfix: pressure included for profile output
216	! Check pressure gradient conditions
217	! topography_grid_convention moved from user_check_parameters
218	! 'single_street_canyon'
219	! Added shf* and qsws* to the list of available output data
220	!
221	! 222 2009-01-12 16:04:16Z letzel
222	! +user_check_parameters
223	! Output of messages replaced by message handling routine.
224	! Implementation of an MPI-1 coupling: replaced myid with target_id,
225	! deleted __mpi2 directives
226	! Check that PALM is called with mrun -K parallel for coupling
227	!
228	! 197 2008-09-16 15:29:03Z raasch
229	! Bug fix: Construction of vertical profiles when 10 gradients have been
230	! specified in the parameter list (ug, vg, pt, q, sa, lad)
231	!
232	! Strict grid matching along z is not needed for mg-solver.
233	! Leaf area density (LAD) explicitly set to its surface value at k=0
234	! Case of reading data for recycling included in initializing_actions,
235	! check of turbulent_inflow and calculation of recycling_plane.
236	! q*2 profile added
237	!
238	! 138 2007-11-28 10:03:58Z letzel
239	! Plant canopy added
240	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
241	! Multigrid solver allows topography, checking of dt_sort_particles
242	! Bugfix: initializing u_init and v_init in case of ocean runs
243	!
244	! 109 2007-08-28 15:26:47Z letzel
245	! Check coupling_mode and set default (obligatory) values (like boundary
246	! conditions for temperature and fluxes) in case of coupled runs.
247	! +profiles for wp and w"e
248	! Bugfix: Error message concerning output of particle concentration (pc)
249	! modified
250	! More checks and more default values for coupled runs
251	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
252	! cloud_physics = .T.)
253	! Rayleigh damping for ocean fixed.
254	! Check and, if necessary, set default value for dt_coupling
255	!
256	! 97 2007-06-21 08:23:15Z raasch
257	! Initial salinity profile is calculated, salinity boundary conditions are
258	! checked,
259	! z_max_do1d is checked only in case of ocean = .f.,
260	! +initial temperature and geostrophic velocity profiles for the ocean version,
261	! use_pt_reference renamed use_reference
262	!
263	! 89 2007-05-25 12:08:31Z raasch
264	! Check for user-defined profiles
265	!
266	! 75 2007-03-22 09:54:05Z raasch
267	! "by_user" allowed as initializing action, -data_output_ts,
268	! leapfrog with non-flat topography not allowed any more, loop_optimization
269	! and pt_reference are checked, moisture renamed humidity,
270	! output of precipitation amount/rate and roughnes length + check
271	! possible negative humidities are avoided in initial profile,
272	! dirichlet/neumann changed to dirichlet/radiation, etc.,
273	! revision added to run_description_header
274	!
275	! 20 2007-02-26 00:12:32Z raasch
276	! Temperature and humidity gradients at top are now calculated for nzt+1,
277	! top_heatflux and respective boundary condition bc_pt_t is checked
278	!
279	! RCS Log replace by Id keyword, revision history cleaned up
280	!
281	! Revision 1.61 2006/08/04 14:20:25 raasch
282	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
283	! use_upstream_for_tke, default value for dt_dopts,
284	! generation of file header moved from routines palm and header to here
285	!
286	! Revision 1.1 1997/08/26 06:29:23 raasch
287	! Initial revision
288	!
289	!
290	! Description:
291	! ------------
292	! Check control parameters and deduce further quantities.
293	!------------------------------------------------------------------------------!
294
295	USE arrays_3d
296	USE cloud_parameters
297	USE constants
298	USE control_parameters
299	USE dvrp_variables
300	USE grid_variables
301	USE indices
302	USE model_1d
303	USE netcdf_control
304	USE particle_attributes
305	USE pegrid
306	USE profil_parameter
307	USE subsidence_mod
308	USE statistics
309	USE transpose_indices
310
311	IMPLICIT NONE
312
313	CHARACTER (LEN=1) :: sq
314	CHARACTER (LEN=6) :: var
315	CHARACTER (LEN=7) :: unit
316	CHARACTER (LEN=8) :: date
317	CHARACTER (LEN=10) :: time
318	CHARACTER (LEN=40) :: coupling_string
319	CHARACTER (LEN=100) :: action
320
321	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
322	LOGICAL :: found, ldum
323	REAL :: gradient, remote = 0.0, simulation_time_since_reference
324
325	!
326	!-- Check for overlap combinations, which are not realized yet
327	IF ( transpose_compute_overlap ) THEN
328	IF ( numprocs == 1 ) STOP '+++ transpose-compute-overlap not implemented for single PE runs'
329	#if defined( __openacc )
330	STOP '+++ transpose-compute-overlap not implemented for GPU usage'
331	#endif
332	ENDIF
333
334	!
335	!-- Warning, if host is not set
336	IF ( host(1:1) == ' ' ) THEN
337	message_string = '"host" is not set. Please check that environment ' // &
338	'variable "localhost" & is set before running PALM'
339	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
340	ENDIF
341
342	!
343	!-- Check the coupling mode
344	IF ( coupling_mode /= 'uncoupled' .AND. &
345	coupling_mode /= 'atmosphere_to_ocean' .AND. &
346	coupling_mode /= 'ocean_to_atmosphere' ) THEN
347	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
348	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
349	ENDIF
350
351	!
352	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
353	IF ( coupling_mode /= 'uncoupled') THEN
354
355	IF ( dt_coupling == 9999999.9 ) THEN
356	message_string = 'dt_coupling is not set but required for coup' // &
357	'ling mode "' // TRIM( coupling_mode ) // '"'
358	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
359	ENDIF
360
361	#if defined( __parallel )
362
363	!
364	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
365	!-- program.
366	!-- check_namelist_files will need the following information of the other
367	!-- model (atmosphere/ocean).
368	! dt_coupling = remote
369	! dt_max = remote
370	! restart_time = remote
371	! dt_restart= remote
372	! simulation_time_since_reference = remote
373	! dx = remote
374
375
376	#if ! defined( __check )
377	IF ( myid == 0 ) THEN
378	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
379	ierr )
380	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
381	status, ierr )
382	ENDIF
383	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
384	#endif
385	IF ( dt_coupling /= remote ) THEN
386	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
387	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
388	'dt_coupling_remote = ', remote
389	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
390	ENDIF
391	IF ( dt_coupling <= 0.0 ) THEN
392	#if ! defined( __check )
393	IF ( myid == 0 ) THEN
394	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
395	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
396	status, ierr )
397	ENDIF
398	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
399	#endif
400	dt_coupling = MAX( dt_max, remote )
401	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
402	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
403	'MAX(dt_max(A,O)) = ', dt_coupling
404	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
405	ENDIF
406	#if ! defined( __check )
407	IF ( myid == 0 ) THEN
408	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
409	ierr )
410	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
411	status, ierr )
412	ENDIF
413	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
414	#endif
415	IF ( restart_time /= remote ) THEN
416	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
417	'": restart_time = ', restart_time, '& is not equal to ', &
418	'restart_time_remote = ', remote
419	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
420	ENDIF
421	#if ! defined( __check )
422	IF ( myid == 0 ) THEN
423	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
424	ierr )
425	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
426	status, ierr )
427	ENDIF
428	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
429	#endif
430	IF ( dt_restart /= remote ) THEN
431	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
432	'": dt_restart = ', dt_restart, '& is not equal to ', &
433	'dt_restart_remote = ', remote
434	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
435	ENDIF
436
437	simulation_time_since_reference = end_time - coupling_start_time
438	#if ! defined( __check )
439	IF ( myid == 0 ) THEN
440	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
441	14, comm_inter, ierr )
442	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
443	status, ierr )
444	ENDIF
445	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
446	#endif
447	IF ( simulation_time_since_reference /= remote ) THEN
448	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
449	'": simulation_time_since_reference = ', &
450	simulation_time_since_reference, '& is not equal to ', &
451	'simulation_time_since_reference_remote = ', remote
452	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
453	ENDIF
454
455	#if ! defined( __check )
456	IF ( myid == 0 ) THEN
457	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
458	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
459	status, ierr )
460	ENDIF
461	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
462
463	#endif
464	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
465
466	IF ( dx < remote ) THEN
467	WRITE( message_string, * ) 'coupling mode "', &
468	TRIM( coupling_mode ), &
469	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
470	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
471	ENDIF
472
473	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
474	WRITE( message_string, * ) 'coupling mode "', &
475	TRIM( coupling_mode ), &
476	'": Domain size in x-direction is not equal in ocean and atmosphere'
477	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
478	ENDIF
479
480	ENDIF
481
482	#if ! defined( __check )
483	IF ( myid == 0) THEN
484	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
485	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
486	status, ierr )
487	ENDIF
488	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
489	#endif
490	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
491
492	IF ( dy < remote ) THEN
493	WRITE( message_string, * ) 'coupling mode "', &
494	TRIM( coupling_mode ), &
495	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
496	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
497	ENDIF
498
499	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
500	WRITE( message_string, * ) 'coupling mode "', &
501	TRIM( coupling_mode ), &
502	'": Domain size in y-direction is not equal in ocean and atmosphere'
503	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
504	ENDIF
505
506	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
507	WRITE( message_string, * ) 'coupling mode "', &
508	TRIM( coupling_mode ), &
509	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
510	' atmosphere'
511	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
512	ENDIF
513
514	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
515	WRITE( message_string, * ) 'coupling mode "', &
516	TRIM( coupling_mode ), &
517	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
518	' atmosphere'
519	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
520	ENDIF
521
522	ENDIF
523	#else
524	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
525	' ''mrun -K parallel'''
526	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
527	#endif
528	ENDIF
529
530	#if defined( __parallel ) && ! defined ( __check )
531	!
532	!-- Exchange via intercommunicator
533	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
534	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
535	ierr )
536	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
537	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
538	comm_inter, status, ierr )
539	ENDIF
540	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
541
542	#endif
543
544
545	!
546	!-- Generate the file header which is used as a header for most of PALM's
547	!-- output files
548	CALL DATE_AND_TIME( date, time )
549	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
550	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
551	IF ( coupling_mode == 'uncoupled' ) THEN
552	coupling_string = ''
553	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
554	coupling_string = ' coupled (atmosphere)'
555	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
556	coupling_string = ' coupled (ocean)'
557	ENDIF
558
559	WRITE ( run_description_header, &
560	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
561	TRIM( version ), TRIM( revision ), 'run: ', &
562	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
563	'host: ', TRIM( host ), run_date, run_time
564
565	!
566	!-- Check the general loop optimization method
567	IF ( loop_optimization == 'default' ) THEN
568	IF ( host(1:3) == 'nec' ) THEN
569	loop_optimization = 'vector'
570	ELSE
571	loop_optimization = 'cache'
572	ENDIF
573	ENDIF
574
575	SELECT CASE ( TRIM( loop_optimization ) )
576
577	CASE ( 'acc', 'cache', 'vector' )
578	CONTINUE
579
580	CASE DEFAULT
581	message_string = 'illegal value given for loop_optimization: "' // &
582	TRIM( loop_optimization ) // '"'
583	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
584
585	END SELECT
586
587	!
588	!-- Check if vertical grid stretching is used together with particles
589	IF ( dz_stretch_level < 100000.0 .AND. particle_advection ) THEN
590	message_string = 'Vertical grid stretching is not allowed together ' // &
591	'with particle advection.'
592	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
593	ENDIF
594
595	!
596	!-- Check topography setting (check for illegal parameter combinations)
597	IF ( topography /= 'flat' ) THEN
598	action = ' '
599	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
600	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
601	ENDIF
602	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
603	THEN
604	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
605	ENDIF
606	IF ( psolver == 'sor' ) THEN
607	WRITE( action, '(A,A)' ) 'psolver = ', psolver
608	ENDIF
609	IF ( sloping_surface ) THEN
610	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
611	ENDIF
612	IF ( galilei_transformation ) THEN
613	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
614	ENDIF
615	IF ( cloud_physics ) THEN
616	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
617	ENDIF
618	IF ( cloud_droplets ) THEN
619	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
620	ENDIF
621	IF ( .NOT. prandtl_layer ) THEN
622	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
623	ENDIF
624	IF ( action /= ' ' ) THEN
625	message_string = 'a non-flat topography does not allow ' // &
626	TRIM( action )
627	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
628	ENDIF
629	!
630	!-- In case of non-flat topography, check whether the convention how to
631	!-- define the topography grid has been set correctly, or whether the default
632	!-- is applicable. If this is not possible, abort.
633	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
634	IF ( TRIM( topography ) /= 'single_building' .AND. &
635	TRIM( topography ) /= 'single_street_canyon' .AND. &
636	TRIM( topography ) /= 'read_from_file' ) THEN
637	!-- The default value is not applicable here, because it is only valid
638	!-- for the two standard cases 'single_building' and 'read_from_file'
639	!-- defined in init_grid.
640	WRITE( message_string, * ) &
641	'The value for "topography_grid_convention" ', &
642	'is not set. Its default value is & only valid for ', &
643	'"topography" = ''single_building'', ', &
644	'''single_street_canyon'' & or ''read_from_file''.', &
645	' & Choose ''cell_edge'' or ''cell_center''.'
646	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
647	ELSE
648	!-- The default value is applicable here.
649	!-- Set convention according to topography.
650	IF ( TRIM( topography ) == 'single_building' .OR. &
651	TRIM( topography ) == 'single_street_canyon' ) THEN
652	topography_grid_convention = 'cell_edge'
653	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
654	topography_grid_convention = 'cell_center'
655	ENDIF
656	ENDIF
657	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
658	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
659	WRITE( message_string, * ) &
660	'The value for "topography_grid_convention" is ', &
661	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
662	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
663	ENDIF
664
665	ENDIF
666
667	!
668	!-- Check ocean setting
669	IF ( ocean ) THEN
670
671	action = ' '
672	IF ( action /= ' ' ) THEN
673	message_string = 'ocean = .T. does not allow ' // TRIM( action )
674	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
675	ENDIF
676
677	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
678	TRIM( coupling_char ) == '_O' ) THEN
679
680	!
681	!-- Check whether an (uncoupled) atmospheric run has been declared as an
682	!-- ocean run (this setting is done via mrun-option -y)
683
684	message_string = 'ocean = .F. does not allow coupling_char = "' // &
685	TRIM( coupling_char ) // '" set by mrun-option "-y"'
686	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
687
688	ENDIF
689	!
690	!-- Check cloud scheme
691	IF ( cloud_scheme == 'seifert_beheng' ) THEN
692	icloud_scheme = 0
693	ELSEIF ( cloud_scheme == 'kessler' ) THEN
694	icloud_scheme = 1
695	ELSE
696	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
697	TRIM( cloud_scheme ) // '"'
698	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
699	ENDIF
700	!
701	!-- Check whether there are any illegal values
702	!-- Pressure solver:
703	IF ( psolver /= 'poisfft' .AND. &
704	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
705	message_string = 'unknown solver for perturbation pressure: psolver' // &
706	' = "' // TRIM( psolver ) // '"'
707	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
708	ENDIF
709
710	IF ( psolver == 'multigrid' ) THEN
711	IF ( cycle_mg == 'w' ) THEN
712	gamma_mg = 2
713	ELSEIF ( cycle_mg == 'v' ) THEN
714	gamma_mg = 1
715	ELSE
716	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
717	TRIM( cycle_mg ) // '"'
718	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
719	ENDIF
720	ENDIF
721
722	IF ( fft_method /= 'singleton-algorithm' .AND. &
723	fft_method /= 'temperton-algorithm' .AND. &
724	fft_method /= 'fftw' .AND. &
725	fft_method /= 'system-specific' ) THEN
726	message_string = 'unknown fft-algorithm: fft_method = "' // &
727	TRIM( fft_method ) // '"'
728	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
729	ENDIF
730
731	IF( momentum_advec == 'ws-scheme' .AND. &
732	.NOT. call_psolver_at_all_substeps ) THEN
733	message_string = 'psolver must be called at each RK3 substep when "'//&
734	TRIM(momentum_advec) // ' "is used for momentum_advec'
735	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
736	END IF
737	!
738	!-- Advection schemes:
739	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
740	THEN
741	message_string = 'unknown advection scheme: momentum_advec = "' // &
742	TRIM( momentum_advec ) // '"'
743	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
744	ENDIF
745	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
746	.AND. ( timestep_scheme == 'euler' .OR. &
747	timestep_scheme == 'runge-kutta-2' ) ) &
748	THEN
749	message_string = 'momentum_advec or scalar_advec = "' &
750	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
751	TRIM( timestep_scheme ) // '"'
752	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
753	ENDIF
754	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
755	scalar_advec /= 'bc-scheme' ) &
756	THEN
757	message_string = 'unknown advection scheme: scalar_advec = "' // &
758	TRIM( scalar_advec ) // '"'
759	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
760	ENDIF
761	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
762	THEN
763	message_string = 'advection_scheme scalar_advec = "' &
764	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
765	TRIM( loop_optimization ) // '"'
766	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
767	ENDIF
768
769	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
770	use_upstream_for_tke = .TRUE.
771	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
772	'use_sgs_for_particles = .TRUE.'
773	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
774	ENDIF
775
776	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
777	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
778	'curvature_solution_effects = .TRUE.'
779	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
780	ENDIF
781
782	!
783	!-- Set LOGICAL switches to enhance performance
784	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
785	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
786
787	!
788	!-- Timestep schemes:
789	SELECT CASE ( TRIM( timestep_scheme ) )
790
791	CASE ( 'euler' )
792	intermediate_timestep_count_max = 1
793
794	CASE ( 'runge-kutta-2' )
795	intermediate_timestep_count_max = 2
796
797	CASE ( 'runge-kutta-3' )
798	intermediate_timestep_count_max = 3
799
800	CASE DEFAULT
801	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
802	TRIM( timestep_scheme ) // '"'
803	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
804
805	END SELECT
806
807	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
808	.AND. timestep_scheme(1:5) == 'runge' ) THEN
809	message_string = 'momentum advection scheme "' // &
810	TRIM( momentum_advec ) // '" & does not work with ' // &
811	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
812	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
813	ENDIF
814
815	!
816	!-- Collision kernels:
817	SELECT CASE ( TRIM( collision_kernel ) )
818
819	CASE ( 'hall', 'hall_fast' )
820	hall_kernel = .TRUE.
821
822	CASE ( 'palm' )
823	palm_kernel = .TRUE.
824
825	CASE ( 'wang', 'wang_fast' )
826	wang_kernel = .TRUE.
827
828	CASE ( 'none' )
829
830
831	CASE DEFAULT
832	message_string = 'unknown collision kernel: collision_kernel = "' // &
833	TRIM( collision_kernel ) // '"'
834	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
835
836	END SELECT
837	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
838
839	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
840	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
841	!
842	!-- No restart run: several initialising actions are possible
843	action = initializing_actions
844	DO WHILE ( TRIM( action ) /= '' )
845	position = INDEX( action, ' ' )
846	SELECT CASE ( action(1:position-1) )
847
848	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
849	'by_user', 'initialize_vortex', 'initialize_ptanom' )
850	action = action(position+1:)
851
852	CASE DEFAULT
853	message_string = 'initializing_action = "' // &
854	TRIM( action ) // '" unkown or not allowed'
855	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
856
857	END SELECT
858	ENDDO
859	ENDIF
860
861	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
862	conserve_volume_flow ) THEN
863	message_string = 'initializing_actions = "initialize_vortex"' // &
864	' ist not allowed with conserve_volume_flow = .T.'
865	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
866	ENDIF
867
868
869	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
870	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
871	message_string = 'initializing_actions = "set_constant_profiles"' // &
872	' and "set_1d-model_profiles" are not allowed ' // &
873	'simultaneously'
874	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
875	ENDIF
876
877	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
878	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
879	message_string = 'initializing_actions = "set_constant_profiles"' // &
880	' and "by_user" are not allowed simultaneously'
881	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
882	ENDIF
883
884	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
885	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
886	message_string = 'initializing_actions = "by_user" and ' // &
887	'"set_1d-model_profiles" are not allowed simultaneously'
888	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
889	ENDIF
890
891	IF ( cloud_physics .AND. .NOT. humidity ) THEN
892	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
893	'not allowed with humidity = ', humidity
894	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
895	ENDIF
896
897	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
898	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
899	'not allowed with cloud_physics = ', cloud_physics
900	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
901	ENDIF
902
903	IF ( humidity .AND. sloping_surface ) THEN
904	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
905	'are not allowed simultaneously'
906	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
907	ENDIF
908
909	IF ( passive_scalar .AND. humidity ) THEN
910	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
911	'is not allowed simultaneously'
912	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
913	ENDIF
914
915	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
916	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
917	'coefficient & given value is drag_coefficient = 0.0'
918	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
919	ENDIF
920
921	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
922	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
923	' seifert_beheng'
924	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
925	ENDIF
926
927	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
928	icloud_scheme == 0 ) THEN
929	message_string = 'cloud_scheme = seifert_beheng requires ' // &
930	'loop_optimization = cache'
931	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
932	ENDIF
933
934	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
935	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
936	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
937	! 'precipitation = .TRUE. or drizzle = .TRUE.'
938	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
939	! ENDIF
940
941	!
942	!-- In case of no model continuation run, check initialising parameters and
943	!-- deduce further quantities
944	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
945
946	!
947	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
948	pt_init = pt_surface
949	IF ( humidity ) THEN
950	q_init = q_surface
951	ENDIF
952	IF ( ocean ) sa_init = sa_surface
953	IF ( passive_scalar ) q_init = s_surface
954	IF ( plant_canopy ) lad = 0.0
955
956	!
957	!--
958	!-- If required, compute initial profile of the geostrophic wind
959	!-- (component ug)
960	i = 1
961	gradient = 0.0
962
963	IF ( .NOT. ocean ) THEN
964
965	ug_vertical_gradient_level_ind(1) = 0
966	ug(0) = ug_surface
967	DO k = 1, nzt+1
968	IF ( i < 11 ) THEN
969	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
970	ug_vertical_gradient_level(i) >= 0.0 ) THEN
971	gradient = ug_vertical_gradient(i) / 100.0
972	ug_vertical_gradient_level_ind(i) = k - 1
973	i = i + 1
974	ENDIF
975	ENDIF
976	IF ( gradient /= 0.0 ) THEN
977	IF ( k /= 1 ) THEN
978	ug(k) = ug(k-1) + dzu(k) * gradient
979	ELSE
980	ug(k) = ug_surface + dzu(k) * gradient
981	ENDIF
982	ELSE
983	ug(k) = ug(k-1)
984	ENDIF
985	ENDDO
986
987	ELSE
988
989	ug_vertical_gradient_level_ind(1) = nzt+1
990	ug(nzt+1) = ug_surface
991	DO k = nzt, nzb, -1
992	IF ( i < 11 ) THEN
993	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
994	ug_vertical_gradient_level(i) <= 0.0 ) THEN
995	gradient = ug_vertical_gradient(i) / 100.0
996	ug_vertical_gradient_level_ind(i) = k + 1
997	i = i + 1
998	ENDIF
999	ENDIF
1000	IF ( gradient /= 0.0 ) THEN
1001	IF ( k /= nzt ) THEN
1002	ug(k) = ug(k+1) - dzu(k+1) * gradient
1003	ELSE
1004	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
1005	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
1006	ENDIF
1007	ELSE
1008	ug(k) = ug(k+1)
1009	ENDIF
1010	ENDDO
1011
1012	ENDIF
1013
1014	!
1015	!-- In case of no given gradients for ug, choose a zero gradient
1016	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
1017	ug_vertical_gradient_level(1) = 0.0
1018	ENDIF
1019
1020	!
1021	!--
1022	!-- If required, compute initial profile of the geostrophic wind
1023	!-- (component vg)
1024	i = 1
1025	gradient = 0.0
1026
1027	IF ( .NOT. ocean ) THEN
1028
1029	vg_vertical_gradient_level_ind(1) = 0
1030	vg(0) = vg_surface
1031	DO k = 1, nzt+1
1032	IF ( i < 11 ) THEN
1033	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1034	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1035	gradient = vg_vertical_gradient(i) / 100.0
1036	vg_vertical_gradient_level_ind(i) = k - 1
1037	i = i + 1
1038	ENDIF
1039	ENDIF
1040	IF ( gradient /= 0.0 ) THEN
1041	IF ( k /= 1 ) THEN
1042	vg(k) = vg(k-1) + dzu(k) * gradient
1043	ELSE
1044	vg(k) = vg_surface + dzu(k) * gradient
1045	ENDIF
1046	ELSE
1047	vg(k) = vg(k-1)
1048	ENDIF
1049	ENDDO
1050
1051	ELSE
1052
1053	vg_vertical_gradient_level_ind(1) = nzt+1
1054	vg(nzt+1) = vg_surface
1055	DO k = nzt, nzb, -1
1056	IF ( i < 11 ) THEN
1057	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1058	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1059	gradient = vg_vertical_gradient(i) / 100.0
1060	vg_vertical_gradient_level_ind(i) = k + 1
1061	i = i + 1
1062	ENDIF
1063	ENDIF
1064	IF ( gradient /= 0.0 ) THEN
1065	IF ( k /= nzt ) THEN
1066	vg(k) = vg(k+1) - dzu(k+1) * gradient
1067	ELSE
1068	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1069	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1070	ENDIF
1071	ELSE
1072	vg(k) = vg(k+1)
1073	ENDIF
1074	ENDDO
1075
1076	ENDIF
1077
1078	!
1079	!-- In case of no given gradients for vg, choose a zero gradient
1080	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1081	vg_vertical_gradient_level(1) = 0.0
1082	ENDIF
1083
1084	!
1085	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1086	!-- interpolate them from wind profile data (if given)
1087	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1088
1089	u_init = ug
1090	v_init = vg
1091
1092	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1093
1094	IF ( uv_heights(1) /= 0.0 ) THEN
1095	message_string = 'uv_heights(1) must be 0.0'
1096	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1097	ENDIF
1098
1099	use_prescribed_profile_data = .TRUE.
1100
1101	kk = 1
1102	u_init(0) = 0.0
1103	v_init(0) = 0.0
1104
1105	DO k = 1, nz+1
1106
1107	IF ( kk < 100 ) THEN
1108	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1109	kk = kk + 1
1110	IF ( kk == 100 ) EXIT
1111	ENDDO
1112	ENDIF
1113
1114	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1115	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1116	( uv_heights(kk+1) - uv_heights(kk) ) * &
1117	( u_profile(kk+1) - u_profile(kk) )
1118	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1119	( uv_heights(kk+1) - uv_heights(kk) ) * &
1120	( v_profile(kk+1) - v_profile(kk) )
1121	ELSE
1122	u_init(k) = u_profile(kk)
1123	v_init(k) = v_profile(kk)
1124	ENDIF
1125
1126	ENDDO
1127
1128	ELSE
1129
1130	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1131	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1132
1133	ENDIF
1134
1135	!
1136	!-- Compute initial temperature profile using the given temperature gradients
1137	IF ( .NOT. neutral ) THEN
1138
1139	i = 1
1140	gradient = 0.0
1141
1142	IF ( .NOT. ocean ) THEN
1143
1144	pt_vertical_gradient_level_ind(1) = 0
1145	DO k = 1, nzt+1
1146	IF ( i < 11 ) THEN
1147	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1148	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1149	gradient = pt_vertical_gradient(i) / 100.0
1150	pt_vertical_gradient_level_ind(i) = k - 1
1151	i = i + 1
1152	ENDIF
1153	ENDIF
1154	IF ( gradient /= 0.0 ) THEN
1155	IF ( k /= 1 ) THEN
1156	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1157	ELSE
1158	pt_init(k) = pt_surface + dzu(k) * gradient
1159	ENDIF
1160	ELSE
1161	pt_init(k) = pt_init(k-1)
1162	ENDIF
1163	ENDDO
1164
1165	ELSE
1166
1167	pt_vertical_gradient_level_ind(1) = nzt+1
1168	DO k = nzt, 0, -1
1169	IF ( i < 11 ) THEN
1170	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1171	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1172	gradient = pt_vertical_gradient(i) / 100.0
1173	pt_vertical_gradient_level_ind(i) = k + 1
1174	i = i + 1
1175	ENDIF
1176	ENDIF
1177	IF ( gradient /= 0.0 ) THEN
1178	IF ( k /= nzt ) THEN
1179	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1180	ELSE
1181	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1182	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1183	ENDIF
1184	ELSE
1185	pt_init(k) = pt_init(k+1)
1186	ENDIF
1187	ENDDO
1188
1189	ENDIF
1190
1191	ENDIF
1192
1193	!
1194	!-- In case of no given temperature gradients, choose gradient of neutral
1195	!-- stratification
1196	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1197	pt_vertical_gradient_level(1) = 0.0
1198	ENDIF
1199
1200	!
1201	!-- Store temperature gradient at the top boundary for possible Neumann
1202	!-- boundary condition
1203	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1204
1205	!
1206	!-- If required, compute initial humidity or scalar profile using the given
1207	!-- humidity/scalar gradient. In case of scalar transport, initially store
1208	!-- values of the scalar parameters on humidity parameters
1209	IF ( passive_scalar ) THEN
1210	bc_q_b = bc_s_b
1211	bc_q_t = bc_s_t
1212	q_surface = s_surface
1213	q_surface_initial_change = s_surface_initial_change
1214	q_vertical_gradient = s_vertical_gradient
1215	q_vertical_gradient_level = s_vertical_gradient_level
1216	surface_waterflux = surface_scalarflux
1217	wall_humidityflux = wall_scalarflux
1218	ENDIF
1219
1220	IF ( humidity .OR. passive_scalar ) THEN
1221
1222	i = 1
1223	gradient = 0.0
1224	q_vertical_gradient_level_ind(1) = 0
1225	DO k = 1, nzt+1
1226	IF ( i < 11 ) THEN
1227	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1228	q_vertical_gradient_level(i) >= 0.0 ) THEN
1229	gradient = q_vertical_gradient(i) / 100.0
1230	q_vertical_gradient_level_ind(i) = k - 1
1231	i = i + 1
1232	ENDIF
1233	ENDIF
1234	IF ( gradient /= 0.0 ) THEN
1235	IF ( k /= 1 ) THEN
1236	q_init(k) = q_init(k-1) + dzu(k) * gradient
1237	ELSE
1238	q_init(k) = q_init(k-1) + dzu(k) * gradient
1239	ENDIF
1240	ELSE
1241	q_init(k) = q_init(k-1)
1242	ENDIF
1243	!
1244	!-- Avoid negative humidities
1245	IF ( q_init(k) < 0.0 ) THEN
1246	q_init(k) = 0.0
1247	ENDIF
1248	ENDDO
1249
1250	!
1251	!-- In case of no given humidity gradients, choose zero gradient
1252	!-- conditions
1253	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1254	q_vertical_gradient_level(1) = 0.0
1255	ENDIF
1256	!
1257	!-- Store humidity, rain water content and rain drop concentration
1258	!-- gradient at the top boundary for possile Neumann boundary condition
1259	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1260	ENDIF
1261
1262	!
1263	!-- If required, compute initial salinity profile using the given salinity
1264	!-- gradients
1265	IF ( ocean ) THEN
1266
1267	i = 1
1268	gradient = 0.0
1269
1270	sa_vertical_gradient_level_ind(1) = nzt+1
1271	DO k = nzt, 0, -1
1272	IF ( i < 11 ) THEN
1273	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1274	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1275	gradient = sa_vertical_gradient(i) / 100.0
1276	sa_vertical_gradient_level_ind(i) = k + 1
1277	i = i + 1
1278	ENDIF
1279	ENDIF
1280	IF ( gradient /= 0.0 ) THEN
1281	IF ( k /= nzt ) THEN
1282	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1283	ELSE
1284	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1285	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1286	ENDIF
1287	ELSE
1288	sa_init(k) = sa_init(k+1)
1289	ENDIF
1290	ENDDO
1291
1292	ENDIF
1293
1294	!
1295	!-- If required compute the profile of leaf area density used in the plant
1296	!-- canopy model
1297	IF ( plant_canopy ) THEN
1298
1299	i = 1
1300	gradient = 0.0
1301
1302	IF ( .NOT. ocean ) THEN
1303
1304	lad(0) = lad_surface
1305
1306	lad_vertical_gradient_level_ind(1) = 0
1307	DO k = 1, pch_index
1308	IF ( i < 11 ) THEN
1309	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1310	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1311	gradient = lad_vertical_gradient(i)
1312	lad_vertical_gradient_level_ind(i) = k - 1
1313	i = i + 1
1314	ENDIF
1315	ENDIF
1316	IF ( gradient /= 0.0 ) THEN
1317	IF ( k /= 1 ) THEN
1318	lad(k) = lad(k-1) + dzu(k) * gradient
1319	ELSE
1320	lad(k) = lad_surface + dzu(k) *gradient
1321	ENDIF
1322	ELSE
1323	lad(k) = lad(k-1)
1324	ENDIF
1325	ENDDO
1326
1327	ENDIF
1328
1329	!
1330	!-- In case of no given leaf area density gradients, choose a vanishing
1331	!-- gradient
1332	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1333	lad_vertical_gradient_level(1) = 0.0
1334	ENDIF
1335
1336	ENDIF
1337
1338	ENDIF
1339
1340	!
1341	!-- Initialize large scale subsidence if required
1342	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1343	large_scale_subsidence = .TRUE.
1344	CALL init_w_subsidence
1345	ENDIF
1346
1347	!
1348	!-- Compute Coriolis parameter
1349	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1350	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1351
1352	!
1353	!-- Check and set buoyancy related parameters and switches
1354	IF ( reference_state == 'horizontal_average' ) THEN
1355	CONTINUE
1356	ELSEIF ( reference_state == 'initial_profile' ) THEN
1357	use_initial_profile_as_reference = .TRUE.
1358	ELSEIF ( reference_state == 'single_value' ) THEN
1359	use_single_reference_value = .TRUE.
1360	IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface
1361	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
1362	ELSE
1363	message_string = 'illegal value for reference_state: "' // &
1364	TRIM( reference_state ) // '"'
1365	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1366	ENDIF
1367
1368	!
1369	!-- Ocean runs always use reference values in the buoyancy term
1370	IF ( ocean ) THEN
1371	reference_state = 'single_value'
1372	use_single_reference_value = .TRUE.
1373	ENDIF
1374
1375	!
1376	!-- Sign of buoyancy/stability terms
1377	IF ( ocean ) atmos_ocean_sign = -1.0
1378
1379	!
1380	!-- Ocean version must use flux boundary conditions at the top
1381	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1382	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1383	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1384	ENDIF
1385
1386	!
1387	!-- In case of a given slope, compute the relevant quantities
1388	IF ( alpha_surface /= 0.0 ) THEN
1389	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1390	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1391	' ) must be < 90.0'
1392	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1393	ENDIF
1394	sloping_surface = .TRUE.
1395	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1396	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1397	ENDIF
1398
1399	!
1400	!-- Check time step and cfl_factor
1401	IF ( dt /= -1.0 ) THEN
1402	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1403	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1404	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1405	ENDIF
1406	dt_3d = dt
1407	dt_fixed = .TRUE.
1408	ENDIF
1409
1410	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1411	IF ( cfl_factor == -1.0 ) THEN
1412	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1413	cfl_factor = 0.8
1414	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1415	cfl_factor = 0.9
1416	ELSE
1417	cfl_factor = 0.9
1418	ENDIF
1419	ELSE
1420	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1421	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1422	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1423	ENDIF
1424	ENDIF
1425
1426	!
1427	!-- Store simulated time at begin
1428	simulated_time_at_begin = simulated_time
1429
1430	!
1431	!-- Store reference time for coupled runs and change the coupling flag,
1432	!-- if ...
1433	IF ( simulated_time == 0.0 ) THEN
1434	IF ( coupling_start_time == 0.0 ) THEN
1435	time_since_reference_point = 0.0
1436	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1437	run_coupled = .FALSE.
1438	ENDIF
1439	ENDIF
1440
1441	!
1442	!-- Set wind speed in the Galilei-transformed system
1443	IF ( galilei_transformation ) THEN
1444	IF ( use_ug_for_galilei_tr .AND. &
1445	ug_vertical_gradient_level(1) == 0.0 .AND. &
1446	ug_vertical_gradient(1) == 0.0 .AND. &
1447	vg_vertical_gradient_level(1) == 0.0 .AND. &
1448	vg_vertical_gradient(1) == 0.0 ) THEN
1449	u_gtrans = ug_surface * 0.6
1450	v_gtrans = vg_surface * 0.6
1451	ELSEIF ( use_ug_for_galilei_tr .AND. &
1452	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1453	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1454	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1455	' with galilei transformation'
1456	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1457	ELSEIF ( use_ug_for_galilei_tr .AND. &
1458	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1459	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1460	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1461	' with galilei transformation'
1462	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1463	ELSE
1464	message_string = 'variable translation speed used for galilei-' // &
1465	'transformation, which may cause & instabilities in stably ' // &
1466	'stratified regions'
1467	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1468	ENDIF
1469	ENDIF
1470
1471	!
1472	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1473	!-- fluxes have to be used in the diffusion-terms
1474	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1475
1476	!
1477	!-- Check boundary conditions and set internal variables:
1478	!-- Lateral boundary conditions
1479	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1480	bc_lr /= 'radiation/dirichlet' ) THEN
1481	message_string = 'unknown boundary condition: bc_lr = "' // &
1482	TRIM( bc_lr ) // '"'
1483	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1484	ENDIF
1485	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1486	bc_ns /= 'radiation/dirichlet' ) THEN
1487	message_string = 'unknown boundary condition: bc_ns = "' // &
1488	TRIM( bc_ns ) // '"'
1489	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1490	ENDIF
1491
1492	!
1493	!-- Internal variables used for speed optimization in if clauses
1494	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1495	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1496	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1497	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1498	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1499	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1500
1501	!
1502	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1503	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1504	!-- and tools do not work with non-cyclic boundary conditions.
1505	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1506	IF ( psolver /= 'multigrid' ) THEN
1507	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1508	'psolver = "' // TRIM( psolver ) // '"'
1509	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1510	ENDIF
1511	IF ( momentum_advec /= 'pw-scheme' .AND. &
1512	momentum_advec /= 'ws-scheme') THEN
1513	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1514	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1515	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1516	ENDIF
1517	IF ( scalar_advec /= 'pw-scheme' .AND. &
1518	scalar_advec /= 'ws-scheme' ) THEN
1519	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1520	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1521	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1522	ENDIF
1523	IF ( galilei_transformation ) THEN
1524	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1525	'galilei_transformation = .T.'
1526	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1527	ENDIF
1528	ENDIF
1529
1530	!
1531	!-- Bottom boundary condition for the turbulent Kinetic energy
1532	IF ( bc_e_b == 'neumann' ) THEN
1533	ibc_e_b = 1
1534	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1535	ibc_e_b = 2
1536	IF ( prandtl_layer ) THEN
1537	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1538	TRIM( bc_e_b ) // '"'
1539	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1540	ENDIF
1541	IF ( .NOT. prandtl_layer ) THEN
1542	bc_e_b = 'neumann'
1543	ibc_e_b = 1
1544	message_string = 'boundary condition bc_e_b changed to "' // &
1545	TRIM( bc_e_b ) // '"'
1546	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1547	ENDIF
1548	ELSE
1549	message_string = 'unknown boundary condition: bc_e_b = "' // &
1550	TRIM( bc_e_b ) // '"'
1551	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1552	ENDIF
1553
1554	!
1555	!-- Boundary conditions for perturbation pressure
1556	IF ( bc_p_b == 'dirichlet' ) THEN
1557	ibc_p_b = 0
1558	ELSEIF ( bc_p_b == 'neumann' ) THEN
1559	ibc_p_b = 1
1560	ELSE
1561	message_string = 'unknown boundary condition: bc_p_b = "' // &
1562	TRIM( bc_p_b ) // '"'
1563	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1564	ENDIF
1565
1566	IF ( bc_p_t == 'dirichlet' ) THEN
1567	ibc_p_t = 0
1568	ELSEIF ( bc_p_t == 'neumann' ) THEN
1569	ibc_p_t = 1
1570	ELSE
1571	message_string = 'unknown boundary condition: bc_p_t = "' // &
1572	TRIM( bc_p_t ) // '"'
1573	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1574	ENDIF
1575
1576	!
1577	!-- Boundary conditions for potential temperature
1578	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1579	ibc_pt_b = 2
1580	ELSE
1581	IF ( bc_pt_b == 'dirichlet' ) THEN
1582	ibc_pt_b = 0
1583	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1584	ibc_pt_b = 1
1585	ELSE
1586	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1587	TRIM( bc_pt_b ) // '"'
1588	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1589	ENDIF
1590	ENDIF
1591
1592	IF ( bc_pt_t == 'dirichlet' ) THEN
1593	ibc_pt_t = 0
1594	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1595	ibc_pt_t = 1
1596	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1597	ibc_pt_t = 2
1598	ELSE
1599	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1600	TRIM( bc_pt_t ) // '"'
1601	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1602	ENDIF
1603
1604	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1605	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1606
1607	IF ( neutral ) THEN
1608
1609	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1610	THEN
1611	message_string = 'heatflux must not be set for pure neutral flow'
1612	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1613	ENDIF
1614
1615	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1616	THEN
1617	message_string = 'heatflux must not be set for pure neutral flow'
1618	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1619	ENDIF
1620
1621	ENDIF
1622
1623	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1624	top_momentumflux_v /= 9999999.9 ) THEN
1625	constant_top_momentumflux = .TRUE.
1626	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1627	top_momentumflux_v == 9999999.9 ) ) THEN
1628	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1629	'must be set'
1630	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1631	ENDIF
1632
1633	!
1634	!-- A given surface temperature implies Dirichlet boundary condition for
1635	!-- temperature. In this case specification of a constant heat flux is
1636	!-- forbidden.
1637	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1638	surface_heatflux /= 0.0 ) THEN
1639	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1640	'& is not allowed with constant_heatflux = .TRUE.'
1641	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1642	ENDIF
1643	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1644	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1645	'wed with pt_surface_initial_change (/=0) = ', &
1646	pt_surface_initial_change
1647	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1648	ENDIF
1649
1650	!
1651	!-- A given temperature at the top implies Dirichlet boundary condition for
1652	!-- temperature. In this case specification of a constant heat flux is
1653	!-- forbidden.
1654	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1655	top_heatflux /= 0.0 ) THEN
1656	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1657	'" is not allowed with constant_top_heatflux = .TRUE.'
1658	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1659	ENDIF
1660
1661	!
1662	!-- Boundary conditions for salinity
1663	IF ( ocean ) THEN
1664	IF ( bc_sa_t == 'dirichlet' ) THEN
1665	ibc_sa_t = 0
1666	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1667	ibc_sa_t = 1
1668	ELSE
1669	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1670	TRIM( bc_sa_t ) // '"'
1671	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1672	ENDIF
1673
1674	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1675	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1676	message_string = 'boundary condition: bc_sa_t = "' // &
1677	TRIM( bc_sa_t ) // '" requires to set ' // &
1678	'top_salinityflux'
1679	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1680	ENDIF
1681
1682	!
1683	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1684	!-- salinity. In this case specification of a constant salinity flux is
1685	!-- forbidden.
1686	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1687	top_salinityflux /= 0.0 ) THEN
1688	message_string = 'boundary condition: bc_sa_t = "' // &
1689	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1690	'constant_top_salinityflux = .TRUE.'
1691	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1692	ENDIF
1693
1694	ENDIF
1695
1696	!
1697	!-- In case of humidity or passive scalar, set boundary conditions for total
1698	!-- water content / scalar
1699	IF ( humidity .OR. passive_scalar ) THEN
1700	IF ( humidity ) THEN
1701	sq = 'q'
1702	ELSE
1703	sq = 's'
1704	ENDIF
1705	IF ( bc_q_b == 'dirichlet' ) THEN
1706	ibc_q_b = 0
1707	ELSEIF ( bc_q_b == 'neumann' ) THEN
1708	ibc_q_b = 1
1709	ELSE
1710	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1711	'_b ="' // TRIM( bc_q_b ) // '"'
1712	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1713	ENDIF
1714	IF ( bc_q_t == 'dirichlet' ) THEN
1715	ibc_q_t = 0
1716	ELSEIF ( bc_q_t == 'neumann' ) THEN
1717	ibc_q_t = 1
1718	ELSE
1719	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1720	'_t ="' // TRIM( bc_q_t ) // '"'
1721	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1722	ENDIF
1723
1724	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1725
1726	!
1727	!-- A given surface humidity implies Dirichlet boundary condition for
1728	!-- humidity. In this case specification of a constant water flux is
1729	!-- forbidden.
1730	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1731	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1732	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1733	'th prescribed surface flux'
1734	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1735	ENDIF
1736	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1737	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1738	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1739	q_surface_initial_change
1740	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1741	ENDIF
1742
1743	ENDIF
1744	!
1745	!-- Boundary conditions for horizontal components of wind speed
1746	IF ( bc_uv_b == 'dirichlet' ) THEN
1747	ibc_uv_b = 0
1748	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1749	ibc_uv_b = 1
1750	IF ( prandtl_layer ) THEN
1751	message_string = 'boundary condition: bc_uv_b = "' // &
1752	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1753	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1754	ENDIF
1755	ELSE
1756	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1757	TRIM( bc_uv_b ) // '"'
1758	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1759	ENDIF
1760	!
1761	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1762	!-- assigned with the u and v values of the ocean surface
1763	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1764	ibc_uv_b = 2
1765	ENDIF
1766
1767	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1768	bc_uv_t = 'neumann'
1769	ibc_uv_t = 1
1770	ELSE
1771	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1772	ibc_uv_t = 0
1773	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1774	!
1775	!-- Velocities for the initial u,v-profiles are set zero at the top
1776	!-- in case of dirichlet_0 conditions
1777	u_init(nzt+1) = 0.0
1778	v_init(nzt+1) = 0.0
1779	ENDIF
1780	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1781	ibc_uv_t = 1
1782	ELSE
1783	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1784	TRIM( bc_uv_t ) // '"'
1785	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1786	ENDIF
1787	ENDIF
1788
1789	!
1790	!-- Compute and check, respectively, the Rayleigh Damping parameter
1791	IF ( rayleigh_damping_factor == -1.0 ) THEN
1792	rayleigh_damping_factor = 0.0
1793	ELSE
1794	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1795	THEN
1796	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1797	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1798	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1799	ENDIF
1800	ENDIF
1801
1802	IF ( rayleigh_damping_height == -1.0 ) THEN
1803	IF ( .NOT. ocean ) THEN
1804	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1805	ELSE
1806	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1807	ENDIF
1808	ELSE
1809	IF ( .NOT. ocean ) THEN
1810	IF ( rayleigh_damping_height < 0.0 .OR. &
1811	rayleigh_damping_height > zu(nzt) ) THEN
1812	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1813	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1814	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1815	ENDIF
1816	ELSE
1817	IF ( rayleigh_damping_height > 0.0 .OR. &
1818	rayleigh_damping_height < zu(nzb) ) THEN
1819	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1820	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1821	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1822	ENDIF
1823	ENDIF
1824	ENDIF
1825
1826	!
1827	!-- Check number of chosen statistic regions. More than 10 regions are not
1828	!-- allowed, because so far no more than 10 corresponding output files can
1829	!-- be opened (cf. check_open)
1830	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1831	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1832	statistic_regions+1, ' but only 10 regions are allowed'
1833	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1834	ENDIF
1835	IF ( normalizing_region > statistic_regions .OR. &
1836	normalizing_region < 0) THEN
1837	WRITE ( message_string, * ) 'normalizing_region = ', &
1838	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1839	' (value of statistic_regions)'
1840	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1841	ENDIF
1842
1843	!
1844	!-- Check the interval for sorting particles.
1845	!-- Using particles as cloud droplets requires sorting after each timestep.
1846	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1847	dt_sort_particles = 0.0
1848	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1849	'_droplets = .TRUE.'
1850	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1851	ENDIF
1852
1853	!
1854	!-- Set the default intervals for data output, if necessary
1855	!-- NOTE: dt_dosp has already been set in package_parin
1856	IF ( dt_data_output /= 9999999.9 ) THEN
1857	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1858	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1859	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1860	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1861	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1862	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1863	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1864	DO mid = 1, max_masks
1865	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1866	ENDDO
1867	ENDIF
1868
1869	!
1870	!-- Set the default skip time intervals for data output, if necessary
1871	IF ( skip_time_dopr == 9999999.9 ) &
1872	skip_time_dopr = skip_time_data_output
1873	IF ( skip_time_dosp == 9999999.9 ) &
1874	skip_time_dosp = skip_time_data_output
1875	IF ( skip_time_do2d_xy == 9999999.9 ) &
1876	skip_time_do2d_xy = skip_time_data_output
1877	IF ( skip_time_do2d_xz == 9999999.9 ) &
1878	skip_time_do2d_xz = skip_time_data_output
1879	IF ( skip_time_do2d_yz == 9999999.9 ) &
1880	skip_time_do2d_yz = skip_time_data_output
1881	IF ( skip_time_do3d == 9999999.9 ) &
1882	skip_time_do3d = skip_time_data_output
1883	IF ( skip_time_data_output_av == 9999999.9 ) &
1884	skip_time_data_output_av = skip_time_data_output
1885	DO mid = 1, max_masks
1886	IF ( skip_time_domask(mid) == 9999999.9 ) &
1887	skip_time_domask(mid) = skip_time_data_output
1888	ENDDO
1889
1890	!
1891	!-- Check the average intervals (first for 3d-data, then for profiles and
1892	!-- spectra)
1893	IF ( averaging_interval > dt_data_output_av ) THEN
1894	WRITE( message_string, * ) 'averaging_interval = ', &
1895	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1896	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1897	ENDIF
1898
1899	IF ( averaging_interval_pr == 9999999.9 ) THEN
1900	averaging_interval_pr = averaging_interval
1901	ENDIF
1902
1903	IF ( averaging_interval_pr > dt_dopr ) THEN
1904	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1905	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1906	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1907	ENDIF
1908
1909	IF ( averaging_interval_sp == 9999999.9 ) THEN
1910	averaging_interval_sp = averaging_interval
1911	ENDIF
1912
1913	IF ( averaging_interval_sp > dt_dosp ) THEN
1914	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1915	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1916	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1917	ENDIF
1918
1919	!
1920	!-- Set the default interval for profiles entering the temporal average
1921	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1922	dt_averaging_input_pr = dt_averaging_input
1923	ENDIF
1924
1925	!
1926	!-- Set the default interval for the output of timeseries to a reasonable
1927	!-- value (tries to minimize the number of calls of flow_statistics)
1928	IF ( dt_dots == 9999999.9 ) THEN
1929	IF ( averaging_interval_pr == 0.0 ) THEN
1930	dt_dots = MIN( dt_run_control, dt_dopr )
1931	ELSE
1932	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1933	ENDIF
1934	ENDIF
1935
1936	!
1937	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1938	IF ( dt_averaging_input > averaging_interval ) THEN
1939	WRITE( message_string, * ) 'dt_averaging_input = ', &
1940	dt_averaging_input, ' must be <= averaging_interval = ', &
1941	averaging_interval
1942	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1943	ENDIF
1944
1945	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1946	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1947	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1948	averaging_interval_pr
1949	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1950	ENDIF
1951
1952	!
1953	!-- Set the default value for the integration interval of precipitation amount
1954	IF ( precipitation ) THEN
1955	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1956	precipitation_amount_interval = dt_do2d_xy
1957	ELSE
1958	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1959	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1960	precipitation_amount_interval, ' must not be larger than ', &
1961	'dt_do2d_xy = ', dt_do2d_xy
1962	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1963	ENDIF
1964	ENDIF
1965	ENDIF
1966
1967	!
1968	!-- Determine the number of output profiles and check whether they are
1969	!-- permissible
1970	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1971
1972	dopr_n = dopr_n + 1
1973	i = dopr_n
1974
1975	!
1976	!-- Determine internal profile number (for hom, homs)
1977	!-- and store height levels
1978	SELECT CASE ( TRIM( data_output_pr(i) ) )
1979
1980	CASE ( 'u', '#u' )
1981	dopr_index(i) = 1
1982	dopr_unit(i) = 'm/s'
1983	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1984	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1985	dopr_initial_index(i) = 5
1986	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1987	data_output_pr(i) = data_output_pr(i)(2:)
1988	ENDIF
1989
1990	CASE ( 'v', '#v' )
1991	dopr_index(i) = 2
1992	dopr_unit(i) = 'm/s'
1993	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1994	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1995	dopr_initial_index(i) = 6
1996	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1997	data_output_pr(i) = data_output_pr(i)(2:)
1998	ENDIF
1999
2000	CASE ( 'w' )
2001	dopr_index(i) = 3
2002	dopr_unit(i) = 'm/s'
2003	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2004
2005	CASE ( 'pt', '#pt' )
2006	IF ( .NOT. cloud_physics ) THEN
2007	dopr_index(i) = 4
2008	dopr_unit(i) = 'K'
2009	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2010	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2011	dopr_initial_index(i) = 7
2012	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2013	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
2014	data_output_pr(i) = data_output_pr(i)(2:)
2015	ENDIF
2016	ELSE
2017	dopr_index(i) = 43
2018	dopr_unit(i) = 'K'
2019	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2020	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2021	dopr_initial_index(i) = 28
2022	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2023	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
2024	data_output_pr(i) = data_output_pr(i)(2:)
2025	ENDIF
2026	ENDIF
2027
2028	CASE ( 'e' )
2029	dopr_index(i) = 8
2030	dopr_unit(i) = 'm2/s2'
2031	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2032	hom(nzb,2,8,:) = 0.0
2033
2034	CASE ( 'km', '#km' )
2035	dopr_index(i) = 9
2036	dopr_unit(i) = 'm2/s'
2037	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2038	hom(nzb,2,9,:) = 0.0
2039	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2040	dopr_initial_index(i) = 23
2041	hom(:,2,23,:) = hom(:,2,9,:)
2042	data_output_pr(i) = data_output_pr(i)(2:)
2043	ENDIF
2044
2045	CASE ( 'kh', '#kh' )
2046	dopr_index(i) = 10
2047	dopr_unit(i) = 'm2/s'
2048	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2049	hom(nzb,2,10,:) = 0.0
2050	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2051	dopr_initial_index(i) = 24
2052	hom(:,2,24,:) = hom(:,2,10,:)
2053	data_output_pr(i) = data_output_pr(i)(2:)
2054	ENDIF
2055
2056	CASE ( 'l', '#l' )
2057	dopr_index(i) = 11
2058	dopr_unit(i) = 'm'
2059	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2060	hom(nzb,2,11,:) = 0.0
2061	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2062	dopr_initial_index(i) = 25
2063	hom(:,2,25,:) = hom(:,2,11,:)
2064	data_output_pr(i) = data_output_pr(i)(2:)
2065	ENDIF
2066
2067	CASE ( 'w"u"' )
2068	dopr_index(i) = 12
2069	dopr_unit(i) = 'm2/s2'
2070	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2071	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2072
2073	CASE ( 'wu' )
2074	dopr_index(i) = 13
2075	dopr_unit(i) = 'm2/s2'
2076	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2077
2078	CASE ( 'w"v"' )
2079	dopr_index(i) = 14
2080	dopr_unit(i) = 'm2/s2'
2081	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2082	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2083
2084	CASE ( 'wv' )
2085	dopr_index(i) = 15
2086	dopr_unit(i) = 'm2/s2'
2087	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2088
2089	CASE ( 'w"pt"' )
2090	dopr_index(i) = 16
2091	dopr_unit(i) = 'K m/s'
2092	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2093
2094	CASE ( 'wpt' )
2095	dopr_index(i) = 17
2096	dopr_unit(i) = 'K m/s'
2097	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2098
2099	CASE ( 'wpt' )
2100	dopr_index(i) = 18
2101	dopr_unit(i) = 'K m/s'
2102	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2103
2104	CASE ( 'wu' )
2105	dopr_index(i) = 19
2106	dopr_unit(i) = 'm2/s2'
2107	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2108	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2109
2110	CASE ( 'wv' )
2111	dopr_index(i) = 20
2112	dopr_unit(i) = 'm2/s2'
2113	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2114	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2115
2116	CASE ( 'wptBC' )
2117	dopr_index(i) = 21
2118	dopr_unit(i) = 'K m/s'
2119	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2120
2121	CASE ( 'wptBC' )
2122	dopr_index(i) = 22
2123	dopr_unit(i) = 'K m/s'
2124	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2125
2126	CASE ( 'sa', '#sa' )
2127	IF ( .NOT. ocean ) THEN
2128	message_string = 'data_output_pr = ' // &
2129	TRIM( data_output_pr(i) ) // ' is not imp' // &
2130	'lemented for ocean = .FALSE.'
2131	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2132	ELSE
2133	dopr_index(i) = 23
2134	dopr_unit(i) = 'psu'
2135	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2136	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2137	dopr_initial_index(i) = 26
2138	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2139	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2140	data_output_pr(i) = data_output_pr(i)(2:)
2141	ENDIF
2142	ENDIF
2143
2144	CASE ( 'u*2' )
2145	dopr_index(i) = 30
2146	dopr_unit(i) = 'm2/s2'
2147	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2148
2149	CASE ( 'v*2' )
2150	dopr_index(i) = 31
2151	dopr_unit(i) = 'm2/s2'
2152	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2153
2154	CASE ( 'w*2' )
2155	dopr_index(i) = 32
2156	dopr_unit(i) = 'm2/s2'
2157	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2158
2159	CASE ( 'pt*2' )
2160	dopr_index(i) = 33
2161	dopr_unit(i) = 'K2'
2162	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2163
2164	CASE ( 'e*' )
2165	dopr_index(i) = 34
2166	dopr_unit(i) = 'm2/s2'
2167	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2168
2169	CASE ( 'w2pt' )
2170	dopr_index(i) = 35
2171	dopr_unit(i) = 'K m2/s2'
2172	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2173
2174	CASE ( 'wpt2' )
2175	dopr_index(i) = 36
2176	dopr_unit(i) = 'K2 m/s'
2177	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2178
2179	CASE ( 'we' )
2180	dopr_index(i) = 37
2181	dopr_unit(i) = 'm3/s3'
2182	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2183
2184	CASE ( 'w*3' )
2185	dopr_index(i) = 38
2186	dopr_unit(i) = 'm3/s3'
2187	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2188
2189	CASE ( 'Sw' )
2190	dopr_index(i) = 39
2191	dopr_unit(i) = 'none'
2192	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2193
2194	CASE ( 'p' )
2195	dopr_index(i) = 40
2196	dopr_unit(i) = 'Pa'
2197	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2198
2199	CASE ( 'q', '#q' )
2200	IF ( .NOT. humidity ) THEN
2201	message_string = 'data_output_pr = ' // &
2202	TRIM( data_output_pr(i) ) // ' is not imp' // &
2203	'lemented for humidity = .FALSE.'
2204	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2205	ELSE
2206	dopr_index(i) = 41
2207	dopr_unit(i) = 'kg/kg'
2208	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2209	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2210	dopr_initial_index(i) = 26
2211	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2212	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2213	data_output_pr(i) = data_output_pr(i)(2:)
2214	ENDIF
2215	ENDIF
2216
2217	CASE ( 's', '#s' )
2218	IF ( .NOT. passive_scalar ) THEN
2219	message_string = 'data_output_pr = ' // &
2220	TRIM( data_output_pr(i) ) // ' is not imp' // &
2221	'lemented for passive_scalar = .FALSE.'
2222	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2223	ELSE
2224	dopr_index(i) = 41
2225	dopr_unit(i) = 'kg/m3'
2226	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2227	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2228	dopr_initial_index(i) = 26
2229	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2230	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2231	data_output_pr(i) = data_output_pr(i)(2:)
2232	ENDIF
2233	ENDIF
2234
2235	CASE ( 'qv', '#qv' )
2236	IF ( .NOT. cloud_physics ) THEN
2237	dopr_index(i) = 41
2238	dopr_unit(i) = 'kg/kg'
2239	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2240	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2241	dopr_initial_index(i) = 26
2242	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2243	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2244	data_output_pr(i) = data_output_pr(i)(2:)
2245	ENDIF
2246	ELSE
2247	dopr_index(i) = 42
2248	dopr_unit(i) = 'kg/kg'
2249	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2250	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2251	dopr_initial_index(i) = 27
2252	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2253	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2254	data_output_pr(i) = data_output_pr(i)(2:)
2255	ENDIF
2256	ENDIF
2257
2258	CASE ( 'lpt', '#lpt' )
2259	IF ( .NOT. cloud_physics ) THEN
2260	message_string = 'data_output_pr = ' // &
2261	TRIM( data_output_pr(i) ) // ' is not imp' // &
2262	'lemented for cloud_physics = .FALSE.'
2263	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2264	ELSE
2265	dopr_index(i) = 4
2266	dopr_unit(i) = 'K'
2267	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2268	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2269	dopr_initial_index(i) = 7
2270	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2271	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2272	data_output_pr(i) = data_output_pr(i)(2:)
2273	ENDIF
2274	ENDIF
2275
2276	CASE ( 'vpt', '#vpt' )
2277	dopr_index(i) = 44
2278	dopr_unit(i) = 'K'
2279	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2280	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2281	dopr_initial_index(i) = 29
2282	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2283	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2284	data_output_pr(i) = data_output_pr(i)(2:)
2285	ENDIF
2286
2287	CASE ( 'w"vpt"' )
2288	dopr_index(i) = 45
2289	dopr_unit(i) = 'K m/s'
2290	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2291
2292	CASE ( 'wvpt' )
2293	dopr_index(i) = 46
2294	dopr_unit(i) = 'K m/s'
2295	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2296
2297	CASE ( 'wvpt' )
2298	dopr_index(i) = 47
2299	dopr_unit(i) = 'K m/s'
2300	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2301
2302	CASE ( 'w"q"' )
2303	IF ( .NOT. humidity ) THEN
2304	message_string = 'data_output_pr = ' // &
2305	TRIM( data_output_pr(i) ) // ' is not imp' // &
2306	'lemented for humidity = .FALSE.'
2307	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2308	ELSE
2309	dopr_index(i) = 48
2310	dopr_unit(i) = 'kg/kg m/s'
2311	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2312	ENDIF
2313
2314	CASE ( 'wq' )
2315	IF ( .NOT. humidity ) THEN
2316	message_string = 'data_output_pr = ' // &
2317	TRIM( data_output_pr(i) ) // ' is not imp' // &
2318	'lemented for humidity = .FALSE.'
2319	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2320	ELSE
2321	dopr_index(i) = 49
2322	dopr_unit(i) = 'kg/kg m/s'
2323	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2324	ENDIF
2325
2326	CASE ( 'wq' )
2327	IF ( .NOT. humidity ) THEN
2328	message_string = 'data_output_pr = ' // &
2329	TRIM( data_output_pr(i) ) // ' is not imp' // &
2330	'lemented for humidity = .FALSE.'
2331	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2332	ELSE
2333	dopr_index(i) = 50
2334	dopr_unit(i) = 'kg/kg m/s'
2335	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2336	ENDIF
2337
2338	CASE ( 'w"s"' )
2339	IF ( .NOT. passive_scalar ) THEN
2340	message_string = 'data_output_pr = ' // &
2341	TRIM( data_output_pr(i) ) // ' is not imp' // &
2342	'lemented for passive_scalar = .FALSE.'
2343	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2344	ELSE
2345	dopr_index(i) = 48
2346	dopr_unit(i) = 'kg/m3 m/s'
2347	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2348	ENDIF
2349
2350	CASE ( 'ws' )
2351	IF ( .NOT. passive_scalar ) THEN
2352	message_string = 'data_output_pr = ' // &
2353	TRIM( data_output_pr(i) ) // ' is not imp' // &
2354	'lemented for passive_scalar = .FALSE.'
2355	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2356	ELSE
2357	dopr_index(i) = 49
2358	dopr_unit(i) = 'kg/m3 m/s'
2359	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2360	ENDIF
2361
2362	CASE ( 'ws' )
2363	IF ( .NOT. passive_scalar ) THEN
2364	message_string = 'data_output_pr = ' // &
2365	TRIM( data_output_pr(i) ) // ' is not imp' // &
2366	'lemented for passive_scalar = .FALSE.'
2367	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2368	ELSE
2369	dopr_index(i) = 50
2370	dopr_unit(i) = 'kg/m3 m/s'
2371	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2372	ENDIF
2373
2374	CASE ( 'w"qv"' )
2375	IF ( humidity .AND. .NOT. cloud_physics ) &
2376	THEN
2377	dopr_index(i) = 48
2378	dopr_unit(i) = 'kg/kg m/s'
2379	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2380	ELSEIF( humidity .AND. cloud_physics ) THEN
2381	dopr_index(i) = 51
2382	dopr_unit(i) = 'kg/kg m/s'
2383	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2384	ELSE
2385	message_string = 'data_output_pr = ' // &
2386	TRIM( data_output_pr(i) ) // ' is not imp' // &
2387	'lemented for cloud_physics = .FALSE. an&' // &
2388	'd humidity = .FALSE.'
2389	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2390	ENDIF
2391
2392	CASE ( 'wqv' )
2393	IF ( humidity .AND. .NOT. cloud_physics ) &
2394	THEN
2395	dopr_index(i) = 49
2396	dopr_unit(i) = 'kg/kg m/s'
2397	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2398	ELSEIF( humidity .AND. cloud_physics ) THEN
2399	dopr_index(i) = 52
2400	dopr_unit(i) = 'kg/kg m/s'
2401	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2402	ELSE
2403	message_string = 'data_output_pr = ' // &
2404	TRIM( data_output_pr(i) ) // ' is not imp' // &
2405	'lemented for cloud_physics = .FALSE. an&' // &
2406	'd humidity = .FALSE.'
2407	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2408	ENDIF
2409
2410	CASE ( 'wqv' )
2411	IF ( humidity .AND. .NOT. cloud_physics ) &
2412	THEN
2413	dopr_index(i) = 50
2414	dopr_unit(i) = 'kg/kg m/s'
2415	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2416	ELSEIF( humidity .AND. cloud_physics ) THEN
2417	dopr_index(i) = 53
2418	dopr_unit(i) = 'kg/kg m/s'
2419	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2420	ELSE
2421	message_string = 'data_output_pr = ' // &
2422	TRIM( data_output_pr(i) ) // ' is not imp' // &
2423	'lemented for cloud_physics = .FALSE. an&' // &
2424	'd humidity = .FALSE.'
2425	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2426	ENDIF
2427
2428	CASE ( 'ql' )
2429	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2430	message_string = 'data_output_pr = ' // &
2431	TRIM( data_output_pr(i) ) // ' is not imp' // &
2432	'lemented for cloud_physics = .FALSE. or' // &
2433	'&cloud_droplets = .FALSE.'
2434	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2435	ELSE
2436	dopr_index(i) = 54
2437	dopr_unit(i) = 'kg/kg'
2438	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2439	ENDIF
2440
2441	CASE ( 'wuu*:dz' )
2442	dopr_index(i) = 55
2443	dopr_unit(i) = 'm2/s3'
2444	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2445
2446	CASE ( 'wp:dz' )
2447	dopr_index(i) = 56
2448	dopr_unit(i) = 'm2/s3'
2449	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2450
2451	CASE ( 'w"e:dz' )
2452	dopr_index(i) = 57
2453	dopr_unit(i) = 'm2/s3'
2454	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2455
2456
2457	CASE ( 'u"pt"' )
2458	dopr_index(i) = 58
2459	dopr_unit(i) = 'K m/s'
2460	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2461
2462	CASE ( 'upt' )
2463	dopr_index(i) = 59
2464	dopr_unit(i) = 'K m/s'
2465	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2466
2467	CASE ( 'upt_t' )
2468	dopr_index(i) = 60
2469	dopr_unit(i) = 'K m/s'
2470	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2471
2472	CASE ( 'v"pt"' )
2473	dopr_index(i) = 61
2474	dopr_unit(i) = 'K m/s'
2475	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2476
2477	CASE ( 'vpt' )
2478	dopr_index(i) = 62
2479	dopr_unit(i) = 'K m/s'
2480	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2481
2482	CASE ( 'vpt_t' )
2483	dopr_index(i) = 63
2484	dopr_unit(i) = 'K m/s'
2485	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2486
2487	CASE ( 'rho' )
2488	IF ( .NOT. ocean ) THEN
2489	message_string = 'data_output_pr = ' // &
2490	TRIM( data_output_pr(i) ) // ' is not imp' // &
2491	'lemented for ocean = .FALSE.'
2492	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2493	ELSE
2494	dopr_index(i) = 64
2495	dopr_unit(i) = 'kg/m3'
2496	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2497	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2498	dopr_initial_index(i) = 77
2499	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
2500	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
2501	data_output_pr(i) = data_output_pr(i)(2:)
2502	ENDIF
2503	ENDIF
2504
2505	CASE ( 'w"sa"' )
2506	IF ( .NOT. ocean ) THEN
2507	message_string = 'data_output_pr = ' // &
2508	TRIM( data_output_pr(i) ) // ' is not imp' // &
2509	'lemented for ocean = .FALSE.'
2510	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2511	ELSE
2512	dopr_index(i) = 65
2513	dopr_unit(i) = 'psu m/s'
2514	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2515	ENDIF
2516
2517	CASE ( 'wsa' )
2518	IF ( .NOT. ocean ) THEN
2519	message_string = 'data_output_pr = ' // &
2520	TRIM( data_output_pr(i) ) // ' is not imp' // &
2521	'lemented for ocean = .FALSE.'
2522	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2523	ELSE
2524	dopr_index(i) = 66
2525	dopr_unit(i) = 'psu m/s'
2526	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2527	ENDIF
2528
2529	CASE ( 'wsa' )
2530	IF ( .NOT. ocean ) THEN
2531	message_string = 'data_output_pr = ' // &
2532	TRIM( data_output_pr(i) ) // ' is not imp' // &
2533	'lemented for ocean = .FALSE.'
2534	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2535	ELSE
2536	dopr_index(i) = 67
2537	dopr_unit(i) = 'psu m/s'
2538	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2539	ENDIF
2540
2541	CASE ( 'wp' )
2542	dopr_index(i) = 68
2543	dopr_unit(i) = 'm3/s3'
2544	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2545
2546	CASE ( 'w"e' )
2547	dopr_index(i) = 69
2548	dopr_unit(i) = 'm3/s3'
2549	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2550
2551	CASE ( 'q*2' )
2552	IF ( .NOT. humidity ) THEN
2553	message_string = 'data_output_pr = ' // &
2554	TRIM( data_output_pr(i) ) // ' is not imp' // &
2555	'lemented for humidity = .FALSE.'
2556	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2557	ELSE
2558	dopr_index(i) = 70
2559	dopr_unit(i) = 'kg2/kg2'
2560	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2561	ENDIF
2562
2563	CASE ( 'prho' )
2564	IF ( .NOT. ocean ) THEN
2565	message_string = 'data_output_pr = ' // &
2566	TRIM( data_output_pr(i) ) // ' is not imp' // &
2567	'lemented for ocean = .FALSE.'
2568	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2569	ELSE
2570	dopr_index(i) = 71
2571	dopr_unit(i) = 'kg/m3'
2572	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2573	ENDIF
2574
2575	CASE ( 'hyp' )
2576	dopr_index(i) = 72
2577	dopr_unit(i) = 'dbar'
2578	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2579
2580	CASE ( 'nr' )
2581	IF ( .NOT. cloud_physics ) THEN
2582	message_string = 'data_output_pr = ' // &
2583	TRIM( data_output_pr(i) ) // ' is not imp' // &
2584	'lemented for cloud_physics = .FALSE.'
2585	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2586	ELSEIF ( icloud_scheme /= 0 ) THEN
2587	message_string = 'data_output_pr = ' // &
2588	TRIM( data_output_pr(i) ) // ' is not imp' // &
2589	'lemented for cloud_scheme /= seifert_beheng'
2590	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2591	ELSEIF ( .NOT. precipitation ) THEN
2592	message_string = 'data_output_pr = ' // &
2593	TRIM( data_output_pr(i) ) // ' is not imp' // &
2594	'lemented for precipitation = .FALSE.'
2595	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2596	ELSE
2597	dopr_index(i) = 73
2598	dopr_unit(i) = '1/m3'
2599	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2600	ENDIF
2601
2602	CASE ( 'qr' )
2603	IF ( .NOT. cloud_physics ) THEN
2604	message_string = 'data_output_pr = ' // &
2605	TRIM( data_output_pr(i) ) // ' is not imp' // &
2606	'lemented for cloud_physics = .FALSE.'
2607	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2608	ELSEIF ( icloud_scheme /= 0 ) THEN
2609	message_string = 'data_output_pr = ' // &
2610	TRIM( data_output_pr(i) ) // ' is not imp' // &
2611	'lemented for cloud_scheme /= seifert_beheng'
2612	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2613	ELSEIF ( .NOT. precipitation ) THEN
2614	message_string = 'data_output_pr = ' // &
2615	TRIM( data_output_pr(i) ) // ' is not imp' // &
2616	'lemented for precipitation = .FALSE.'
2617	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2618	ELSE
2619	dopr_index(i) = 74
2620	dopr_unit(i) = 'kg/kg'
2621	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2622	ENDIF
2623
2624	CASE ( 'qc' )
2625	IF ( .NOT. cloud_physics ) THEN
2626	message_string = 'data_output_pr = ' // &
2627	TRIM( data_output_pr(i) ) // ' is not imp' // &
2628	'lemented for cloud_physics = .FALSE.'
2629	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2630	ELSEIF ( icloud_scheme /= 0 ) THEN
2631	message_string = 'data_output_pr = ' // &
2632	TRIM( data_output_pr(i) ) // ' is not imp' // &
2633	'lemented for cloud_scheme /= seifert_beheng'
2634	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2635	ELSE
2636	dopr_index(i) = 75
2637	dopr_unit(i) = 'kg/kg'
2638	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2639	ENDIF
2640
2641	CASE ( 'prr' )
2642	IF ( .NOT. cloud_physics ) THEN
2643	message_string = 'data_output_pr = ' // &
2644	TRIM( data_output_pr(i) ) // ' is not imp' // &
2645	'lemented for cloud_physics = .FALSE.'
2646	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2647	ELSEIF ( icloud_scheme /= 0 ) THEN
2648	message_string = 'data_output_pr = ' // &
2649	TRIM( data_output_pr(i) ) // ' is not imp' // &
2650	'lemented for cloud_scheme /= seifert_beheng'
2651	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2652	ELSEIF ( .NOT. precipitation ) THEN
2653	message_string = 'data_output_pr = ' // &
2654	TRIM( data_output_pr(i) ) // ' is not imp' // &
2655	'lemented for precipitation = .FALSE.'
2656	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2657
2658	ELSE
2659	dopr_index(i) = 76
2660	dopr_unit(i) = 'kg/kg m/s'
2661	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2662	ENDIF
2663
2664	CASE DEFAULT
2665
2666	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2667
2668	IF ( unit == 'illegal' ) THEN
2669	IF ( data_output_pr_user(1) /= ' ' ) THEN
2670	message_string = 'illegal value for data_output_pr or ' // &
2671	'data_output_pr_user = "' // &
2672	TRIM( data_output_pr(i) ) // '"'
2673	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2674	ELSE
2675	message_string = 'illegal value for data_output_pr = "' // &
2676	TRIM( data_output_pr(i) ) // '"'
2677	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2678	ENDIF
2679	ENDIF
2680
2681	END SELECT
2682
2683	ENDDO
2684
2685
2686	!
2687	!-- Append user-defined data output variables to the standard data output
2688	IF ( data_output_user(1) /= ' ' ) THEN
2689	i = 1
2690	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2691	i = i + 1
2692	ENDDO
2693	j = 1
2694	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2695	IF ( i > 100 ) THEN
2696	message_string = 'number of output quantitities given by data' // &
2697	'_output and data_output_user exceeds the limit of 100'
2698	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2699	ENDIF
2700	data_output(i) = data_output_user(j)
2701	i = i + 1
2702	j = j + 1
2703	ENDDO
2704	ENDIF
2705
2706	!
2707	!-- Check and set steering parameters for 2d/3d data output and averaging
2708	i = 1
2709	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2710	!
2711	!-- Check for data averaging
2712	ilen = LEN_TRIM( data_output(i) )
2713	j = 0 ! no data averaging
2714	IF ( ilen > 3 ) THEN
2715	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2716	j = 1 ! data averaging
2717	data_output(i) = data_output(i)(1:ilen-3)
2718	ENDIF
2719	ENDIF
2720	!
2721	!-- Check for cross section or volume data
2722	ilen = LEN_TRIM( data_output(i) )
2723	k = 0 ! 3d data
2724	var = data_output(i)(1:ilen)
2725	IF ( ilen > 3 ) THEN
2726	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2727	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2728	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2729	k = 1 ! 2d data
2730	var = data_output(i)(1:ilen-3)
2731	ENDIF
2732	ENDIF
2733	!
2734	!-- Check for allowed value and set units
2735	SELECT CASE ( TRIM( var ) )
2736
2737	CASE ( 'e' )
2738	IF ( constant_diffusion ) THEN
2739	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2740	'res constant_diffusion = .FALSE.'
2741	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2742	ENDIF
2743	unit = 'm2/s2'
2744
2745	CASE ( 'lpt' )
2746	IF ( .NOT. cloud_physics ) THEN
2747	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2748	'res cloud_physics = .TRUE.'
2749	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2750	ENDIF
2751	unit = 'K'
2752
2753	CASE ( 'nr' )
2754	IF ( .NOT. cloud_physics ) THEN
2755	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2756	'res cloud_physics = .TRUE.'
2757	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2758	ELSEIF ( icloud_scheme /= 0 ) THEN
2759	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2760	'res cloud_scheme = seifert_beheng'
2761	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2762	ENDIF
2763	unit = '1/m3'
2764
2765	CASE ( 'pc', 'pr' )
2766	IF ( .NOT. particle_advection ) THEN
2767	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2768	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2769	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2770	ENDIF
2771	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2772	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2773
2774	CASE ( 'prr' )
2775	IF ( .NOT. cloud_physics ) THEN
2776	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2777	'res cloud_physics = .TRUE.'
2778	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2779	ELSEIF ( icloud_scheme /= 0 ) THEN
2780	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2781	'res cloud_scheme = seifert_beheng'
2782	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2783	ELSEIF ( .NOT. precipitation ) THEN
2784	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2785	'res precipitation = .TRUE.'
2786	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2787	ENDIF
2788	unit = 'kg/kg m/s'
2789
2790	CASE ( 'q', 'vpt' )
2791	IF ( .NOT. humidity ) THEN
2792	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2793	'res humidity = .TRUE.'
2794	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2795	ENDIF
2796	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2797	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2798
2799	CASE ( 'qc' )
2800	IF ( .NOT. cloud_physics ) THEN
2801	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2802	'res cloud_physics = .TRUE.'
2803	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2804	ELSEIF ( icloud_scheme /= 0 ) THEN
2805	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2806	'res cloud_scheme = seifert_beheng'
2807	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2808	ENDIF
2809	unit = 'kg/kg'
2810
2811	CASE ( 'ql' )
2812	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2813	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2814	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2815	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2816	ENDIF
2817	unit = 'kg/kg'
2818
2819	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2820	IF ( .NOT. cloud_droplets ) THEN
2821	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2822	'res cloud_droplets = .TRUE.'
2823	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2824	ENDIF
2825	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2826	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2827	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2828
2829	CASE ( 'qr' )
2830	IF ( .NOT. cloud_physics ) THEN
2831	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2832	'res cloud_physics = .TRUE.'
2833	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2834	ELSEIF ( icloud_scheme /= 0 ) THEN
2835	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2836	'res cloud_scheme = seifert_beheng'
2837	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2838	ELSEIF ( .NOT. precipitation ) THEN
2839	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2840	'res precipitation = .TRUE.'
2841	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2842	ENDIF
2843	unit = 'kg/kg'
2844
2845	CASE ( 'qv' )
2846	IF ( .NOT. cloud_physics ) THEN
2847	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2848	'res cloud_physics = .TRUE.'
2849	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2850	ENDIF
2851	unit = 'kg/kg'
2852
2853	CASE ( 'rho' )
2854	IF ( .NOT. ocean ) THEN
2855	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2856	'res ocean = .TRUE.'
2857	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2858	ENDIF
2859	unit = 'kg/m3'
2860
2861	CASE ( 's' )
2862	IF ( .NOT. passive_scalar ) THEN
2863	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2864	'res passive_scalar = .TRUE.'
2865	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2866	ENDIF
2867	unit = 'conc'
2868
2869	CASE ( 'sa' )
2870	IF ( .NOT. ocean ) THEN
2871	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2872	'res ocean = .TRUE.'
2873	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2874	ENDIF
2875	unit = 'psu'
2876
2877	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2878	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2879	message_string = 'illegal value for data_output: "' // &
2880	TRIM( var ) // '" & only 2d-horizontal ' // &
2881	'cross sections are allowed for this value'
2882	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2883	ENDIF
2884	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2885	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2886	'res cloud_physics = .TRUE.'
2887	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2888	ENDIF
2889	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2890	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2891	'res precipitation = .TRUE.'
2892	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2893	ENDIF
2894	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2895	message_string = 'temporal averaging of precipitation ' // &
2896	'amount "' // TRIM( var ) // '" is not possible'
2897	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2898	ENDIF
2899	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2900	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2901	'res precipitation = .TRUE.'
2902	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2903	ENDIF
2904	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2905	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2906	'res humidity = .TRUE.'
2907	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2908	ENDIF
2909
2910	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2911	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2912	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2913	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2914	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2915	IF ( TRIM( var ) == 't*' ) unit = 'K'
2916	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2917	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2918	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2919
2920
2921	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2922	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2923	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2924	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2925	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2926	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2927	CONTINUE
2928
2929	CASE DEFAULT
2930	CALL user_check_data_output( var, unit )
2931
2932	IF ( unit == 'illegal' ) THEN
2933	IF ( data_output_user(1) /= ' ' ) THEN
2934	message_string = 'illegal value for data_output or ' // &
2935	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2936	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2937	ELSE
2938	message_string = 'illegal value for data_output =' // &
2939	TRIM( data_output(i) ) // '"'
2940	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2941	ENDIF
2942	ENDIF
2943
2944	END SELECT
2945	!
2946	!-- Set the internal steering parameters appropriately
2947	IF ( k == 0 ) THEN
2948	do3d_no(j) = do3d_no(j) + 1
2949	do3d(j,do3d_no(j)) = data_output(i)
2950	do3d_unit(j,do3d_no(j)) = unit
2951	ELSE
2952	do2d_no(j) = do2d_no(j) + 1
2953	do2d(j,do2d_no(j)) = data_output(i)
2954	do2d_unit(j,do2d_no(j)) = unit
2955	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2956	data_output_xy(j) = .TRUE.
2957	ENDIF
2958	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2959	data_output_xz(j) = .TRUE.
2960	ENDIF
2961	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2962	data_output_yz(j) = .TRUE.
2963	ENDIF
2964	ENDIF
2965
2966	IF ( j == 1 ) THEN
2967	!
2968	!-- Check, if variable is already subject to averaging
2969	found = .FALSE.
2970	DO k = 1, doav_n
2971	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2972	ENDDO
2973
2974	IF ( .NOT. found ) THEN
2975	doav_n = doav_n + 1
2976	doav(doav_n) = var
2977	ENDIF
2978	ENDIF
2979
2980	i = i + 1
2981	ENDDO
2982
2983	!
2984	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2985	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2986	WRITE( message_string, * ) 'output of averaged quantity "', &
2987	TRIM( doav(1) ), '_av" requires to set a ', &
2988	'non-zero & averaging interval'
2989	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2990	ENDIF
2991
2992	!
2993	!-- Check sectional planes and store them in one shared array
2994	IF ( ANY( section_xy > nz + 1 ) ) THEN
2995	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2996	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2997	ENDIF
2998	IF ( ANY( section_xz > ny + 1 ) ) THEN
2999	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3000	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3001	ENDIF
3002	IF ( ANY( section_yz > nx + 1 ) ) THEN
3003	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3004	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3005	ENDIF
3006	section(:,1) = section_xy
3007	section(:,2) = section_xz
3008	section(:,3) = section_yz
3009
3010	!
3011	!-- Upper plot limit for 2D vertical sections
3012	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
3013	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3014	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3015	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3016	' (zu(nzt))'
3017	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3018	ENDIF
3019
3020	!
3021	!-- Upper plot limit for 3D arrays
3022	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3023
3024	!
3025	!-- Determine and check accuracy for compressed 3D plot output
3026	IF ( do3d_compress ) THEN
3027	!
3028	!-- Compression only permissible on T3E machines
3029	IF ( host(1:3) /= 't3e' ) THEN
3030	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3031	TRIM( host ) // '"'
3032	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3033	ENDIF
3034
3035	i = 1
3036	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3037
3038	ilen = LEN_TRIM( do3d_comp_prec(i) )
3039	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3040	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3041	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3042	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3043	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3044	ENDIF
3045
3046	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3047	var = do3d_comp_prec(i)(1:ilen-1)
3048
3049	SELECT CASE ( var )
3050
3051	CASE ( 'u' )
3052	j = 1
3053	CASE ( 'v' )
3054	j = 2
3055	CASE ( 'w' )
3056	j = 3
3057	CASE ( 'p' )
3058	j = 4
3059	CASE ( 'pt' )
3060	j = 5
3061
3062	CASE DEFAULT
3063	WRITE( message_string, * ) 'unknown variable "', &
3064	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3065	i, ')'
3066	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3067
3068	END SELECT
3069
3070	plot_3d_precision(j)%precision = prec
3071	i = i + 1
3072
3073	ENDDO
3074	ENDIF
3075
3076	!
3077	!-- Check the data output format(s)
3078	IF ( data_output_format(1) == ' ' ) THEN
3079	!
3080	!-- Default value
3081	netcdf_output = .TRUE.
3082	ELSE
3083	i = 1
3084	DO WHILE ( data_output_format(i) /= ' ' )
3085
3086	SELECT CASE ( data_output_format(i) )
3087
3088	CASE ( 'netcdf' )
3089	netcdf_output = .TRUE.
3090	CASE ( 'iso2d' )
3091	iso2d_output = .TRUE.
3092	CASE ( 'avs' )
3093	avs_output = .TRUE.
3094
3095	CASE DEFAULT
3096	message_string = 'unknown value for data_output_format "' // &
3097	TRIM( data_output_format(i) ) // '"'
3098	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3099
3100	END SELECT
3101
3102	i = i + 1
3103	IF ( i > 10 ) EXIT
3104
3105	ENDDO
3106	ENDIF
3107
3108	!
3109	!-- Set output format string (used in header)
3110	IF ( netcdf_output ) THEN
3111
3112	SELECT CASE ( netcdf_data_format )
3113	CASE ( 1 )
3114	output_format_netcdf = 'netCDF classic'
3115	CASE ( 2 )
3116	output_format_netcdf = 'netCDF 64bit offset'
3117	CASE ( 3 )
3118	output_format_netcdf = 'netCDF4/HDF5'
3119	CASE ( 4 )
3120	output_format_netcdf = 'netCDF4/HDF5 classic'
3121	CASE ( 5 )
3122	output_format_netcdf = 'parallel netCDF4/HDF5'
3123	CASE ( 6 )
3124	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3125
3126	END SELECT
3127
3128	ENDIF
3129
3130	!
3131	!-- Check mask conditions
3132	DO mid = 1, max_masks
3133	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3134	data_output_masks_user(mid,1) /= ' ' ) THEN
3135	masks = masks + 1
3136	ENDIF
3137	ENDDO
3138
3139	IF ( masks < 0 .OR. masks > max_masks ) THEN
3140	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3141	'<= ', max_masks, ' (=max_masks)'
3142	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3143	ENDIF
3144	IF ( masks > 0 ) THEN
3145	mask_scale(1) = mask_scale_x
3146	mask_scale(2) = mask_scale_y
3147	mask_scale(3) = mask_scale_z
3148	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3149	WRITE( message_string, * ) &
3150	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3151	'must be > 0.0'
3152	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3153	ENDIF
3154	!
3155	!-- Generate masks for masked data output
3156	CALL init_masks
3157	ENDIF
3158
3159	!
3160	!-- Check the NetCDF data format
3161	#if ! defined ( __check )
3162	IF ( netcdf_data_format > 2 ) THEN
3163	#if defined( __netcdf4 )
3164	CONTINUE
3165	#else
3166	message_string = 'netCDF: netCDF4 format requested but no ' // &
3167	'cpp-directive __netcdf4 given & switch ' // &
3168	'back to 64-bit offset format'
3169	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3170	netcdf_data_format = 2
3171	#endif
3172	ENDIF
3173	IF ( netcdf_data_format > 4 ) THEN
3174	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3175	CONTINUE
3176	#else
3177	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3178	'cpp-directive __netcdf4_parallel given & switch ' // &
3179	'back to netCDF4 non-parallel output'
3180	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3181	netcdf_data_format = netcdf_data_format - 2
3182	#endif
3183	ENDIF
3184	#endif
3185
3186	#if ! defined( __check )
3187	!
3188	!-- Check netcdf precison
3189	ldum = .FALSE.
3190	CALL define_netcdf_header( 'ch', ldum, 0 )
3191	#endif
3192	!
3193	!-- Check, whether a constant diffusion coefficient shall be used
3194	IF ( km_constant /= -1.0 ) THEN
3195	IF ( km_constant < 0.0 ) THEN
3196	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3197	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3198	ELSE
3199	IF ( prandtl_number < 0.0 ) THEN
3200	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3201	' < 0.0'
3202	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3203	ENDIF
3204	constant_diffusion = .TRUE.
3205
3206	IF ( prandtl_layer ) THEN
3207	message_string = 'prandtl_layer is not allowed with fixed ' // &
3208	'value of km'
3209	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3210	ENDIF
3211	ENDIF
3212	ENDIF
3213
3214	!
3215	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3216	!-- potential temperature, check the width of the damping layer
3217	IF ( bc_lr /= 'cyclic' ) THEN
3218	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3219	message_string = 'pt_damping_width out of range'
3220	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3221	ENDIF
3222	ENDIF
3223
3224	IF ( bc_ns /= 'cyclic' ) THEN
3225	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3226	message_string = 'pt_damping_width out of range'
3227	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3228	ENDIF
3229	ENDIF
3230
3231	!
3232	!-- Check value range for rif
3233	IF ( rif_min >= rif_max ) THEN
3234	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3235	'than rif_max = ', rif_max
3236	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3237	ENDIF
3238
3239	!
3240	!-- Determine upper and lower hight level indices for random perturbations
3241	IF ( disturbance_level_b == -9999999.9 ) THEN
3242	IF ( ocean ) THEN
3243	disturbance_level_b = zu((nzt*2)/3)
3244	disturbance_level_ind_b = ( nzt * 2 ) / 3
3245	ELSE
3246	disturbance_level_b = zu(nzb+3)
3247	disturbance_level_ind_b = nzb + 3
3248	ENDIF
3249	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3250	WRITE( message_string, * ) 'disturbance_level_b = ', &
3251	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3252	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3253	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3254	WRITE( message_string, * ) 'disturbance_level_b = ', &
3255	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3256	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3257	ELSE
3258	DO k = 3, nzt-2
3259	IF ( disturbance_level_b <= zu(k) ) THEN
3260	disturbance_level_ind_b = k
3261	EXIT
3262	ENDIF
3263	ENDDO
3264	ENDIF
3265
3266	IF ( disturbance_level_t == -9999999.9 ) THEN
3267	IF ( ocean ) THEN
3268	disturbance_level_t = zu(nzt-3)
3269	disturbance_level_ind_t = nzt - 3
3270	ELSE
3271	disturbance_level_t = zu(nzt/3)
3272	disturbance_level_ind_t = nzt / 3
3273	ENDIF
3274	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3275	WRITE( message_string, * ) 'disturbance_level_t = ', &
3276	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3277	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3278	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3279	WRITE( message_string, * ) 'disturbance_level_t = ', &
3280	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3281	disturbance_level_b
3282	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3283	ELSE
3284	DO k = 3, nzt-2
3285	IF ( disturbance_level_t <= zu(k) ) THEN
3286	disturbance_level_ind_t = k
3287	EXIT
3288	ENDIF
3289	ENDDO
3290	ENDIF
3291
3292	!
3293	!-- Check again whether the levels determined this way are ok.
3294	!-- Error may occur at automatic determination and too few grid points in
3295	!-- z-direction.
3296	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3297	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3298	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3299	disturbance_level_b
3300	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3301	ENDIF
3302
3303	!
3304	!-- Determine the horizontal index range for random perturbations.
3305	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3306	!-- near the inflow and the perturbation area is further limited to ...(1)
3307	!-- after the initial phase of the flow.
3308	dist_nxl = 0; dist_nxr = nx
3309	dist_nys = 0; dist_nyn = ny
3310	IF ( bc_lr /= 'cyclic' ) THEN
3311	IF ( inflow_disturbance_begin == -1 ) THEN
3312	inflow_disturbance_begin = MIN( 10, nx/2 )
3313	ENDIF
3314	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3315	THEN
3316	message_string = 'inflow_disturbance_begin out of range'
3317	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3318	ENDIF
3319	IF ( inflow_disturbance_end == -1 ) THEN
3320	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3321	ENDIF
3322	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3323	THEN
3324	message_string = 'inflow_disturbance_end out of range'
3325	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3326	ENDIF
3327	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3328	IF ( inflow_disturbance_begin == -1 ) THEN
3329	inflow_disturbance_begin = MIN( 10, ny/2 )
3330	ENDIF
3331	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3332	THEN
3333	message_string = 'inflow_disturbance_begin out of range'
3334	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3335	ENDIF
3336	IF ( inflow_disturbance_end == -1 ) THEN
3337	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3338	ENDIF
3339	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3340	THEN
3341	message_string = 'inflow_disturbance_end out of range'
3342	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3343	ENDIF
3344	ENDIF
3345
3346	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3347	dist_nxr = nx - inflow_disturbance_begin
3348	dist_nxl(1) = nx - inflow_disturbance_end
3349	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3350	dist_nxl = inflow_disturbance_begin
3351	dist_nxr(1) = inflow_disturbance_end
3352	ENDIF
3353	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3354	dist_nyn = ny - inflow_disturbance_begin
3355	dist_nys(1) = ny - inflow_disturbance_end
3356	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3357	dist_nys = inflow_disturbance_begin
3358	dist_nyn(1) = inflow_disturbance_end
3359	ENDIF
3360
3361	!
3362	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3363	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3364	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3365	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3366	'condition at the inflow boundary'
3367	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3368	ENDIF
3369
3370	!
3371	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3372	!-- data from prerun in the first main run
3373	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3374	initializing_actions /= 'read_restart_data' ) THEN
3375	message_string = 'turbulent_inflow = .T. requires ' // &
3376	'initializing_actions = ''cyclic_fill'' '
3377	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3378	ENDIF
3379
3380	!
3381	!-- In case of turbulent inflow calculate the index of the recycling plane
3382	IF ( turbulent_inflow ) THEN
3383	IF ( recycling_width == 9999999.9 ) THEN
3384	!
3385	!-- Set the default value for the width of the recycling domain
3386	recycling_width = 0.1 * nx * dx
3387	ELSE
3388	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3389	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3390	' ', recycling_width
3391	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3392	ENDIF
3393	ENDIF
3394	!
3395	!-- Calculate the index
3396	recycling_plane = recycling_width / dx
3397	ENDIF
3398
3399	!
3400	!-- Check random generator
3401	IF ( random_generator /= 'system-specific' .AND. &
3402	random_generator /= 'numerical-recipes' ) THEN
3403	message_string = 'unknown random generator: random_generator = "' // &
3404	TRIM( random_generator ) // '"'
3405	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3406	ENDIF
3407
3408	!
3409	!-- Determine damping level index for 1D model
3410	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3411	IF ( damp_level_1d == -1.0 ) THEN
3412	damp_level_1d = zu(nzt+1)
3413	damp_level_ind_1d = nzt + 1
3414	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3415	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3416	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3417	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3418	ELSE
3419	DO k = 1, nzt+1
3420	IF ( damp_level_1d <= zu(k) ) THEN
3421	damp_level_ind_1d = k
3422	EXIT
3423	ENDIF
3424	ENDDO
3425	ENDIF
3426	ENDIF
3427
3428	!
3429	!-- Check some other 1d-model parameters
3430	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3431	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3432	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3433	'" is unknown'
3434	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3435	ENDIF
3436	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3437	TRIM( dissipation_1d ) /= 'detering' ) THEN
3438	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3439	'" is unknown'
3440	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3441	ENDIF
3442
3443	!
3444	!-- Set time for the next user defined restart (time_restart is the
3445	!-- internal parameter for steering restart events)
3446	IF ( restart_time /= 9999999.9 ) THEN
3447	IF ( restart_time > time_since_reference_point ) THEN
3448	time_restart = restart_time
3449	ENDIF
3450	ELSE
3451	!
3452	!-- In case of a restart run, set internal parameter to default (no restart)
3453	!-- if the NAMELIST-parameter restart_time is omitted
3454	time_restart = 9999999.9
3455	ENDIF
3456
3457	!
3458	!-- Set default value of the time needed to terminate a model run
3459	IF ( termination_time_needed == -1.0 ) THEN
3460	IF ( host(1:3) == 'ibm' ) THEN
3461	termination_time_needed = 300.0
3462	ELSE
3463	termination_time_needed = 35.0
3464	ENDIF
3465	ENDIF
3466
3467	!
3468	!-- Check the time needed to terminate a model run
3469	IF ( host(1:3) == 't3e' ) THEN
3470	!
3471	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3472	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3473	IF ( termination_time_needed <= 30.0 ) THEN
3474	WRITE( message_string, * ) 'termination_time_needed = ', &
3475	termination_time_needed, ' must be > 30.0 on host "', &
3476	TRIM( host ), '"'
3477	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3478	ENDIF
3479	ELSEIF ( host(1:3) == 'ibm' ) THEN
3480	!
3481	!-- On IBM-regatta machines the time should be at least 300 seconds,
3482	!-- because the job time consumed before executing palm (for compiling,
3483	!-- copying of files, etc.) has to be regarded
3484	IF ( termination_time_needed < 300.0 ) THEN
3485	WRITE( message_string, * ) 'termination_time_needed = ', &
3486	termination_time_needed, ' should be >= 300.0 on host "', &
3487	TRIM( host ), '"'
3488	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3489	ENDIF
3490	ENDIF
3491
3492	!
3493	!-- Check pressure gradient conditions
3494	IF ( dp_external .AND. conserve_volume_flow ) THEN
3495	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3496	'w are .TRUE. but one of them must be .FALSE.'
3497	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3498	ENDIF
3499	IF ( dp_external ) THEN
3500	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3501	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3502	' of range'
3503	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3504	ENDIF
3505	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3506	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3507	'ro, i.e. the external pressure gradient & will not be applied'
3508	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3509	ENDIF
3510	ENDIF
3511	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3512	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3513	'.FALSE., i.e. the external pressure gradient & will not be applied'
3514	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3515	ENDIF
3516	IF ( conserve_volume_flow ) THEN
3517	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3518
3519	conserve_volume_flow_mode = 'initial_profiles'
3520
3521	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3522	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3523	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3524	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3525	conserve_volume_flow_mode
3526	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3527	ENDIF
3528	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3529	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3530	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3531	'require conserve_volume_flow_mode = ''initial_profiles'''
3532	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3533	ENDIF
3534	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3535	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3536	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3537	'require conserve_volume_flow_mode = ''initial_profiles''', &
3538	' or ''bulk_velocity'''
3539	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3540	ENDIF
3541	ENDIF
3542	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3543	( .NOT. conserve_volume_flow .OR. &
3544	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3545	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3546	'conserve_volume_flow = .T. and ', &
3547	'conserve_volume_flow_mode = ''bulk_velocity'''
3548	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3549	ENDIF
3550
3551	!
3552	!-- Check particle attributes
3553	IF ( particle_color /= 'none' ) THEN
3554	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3555	particle_color /= 'z' ) THEN
3556	message_string = 'illegal value for parameter particle_color: ' // &
3557	TRIM( particle_color)
3558	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3559	ELSE
3560	IF ( color_interval(2) <= color_interval(1) ) THEN
3561	message_string = 'color_interval(2) <= color_interval(1)'
3562	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3563	ENDIF
3564	ENDIF
3565	ENDIF
3566
3567	IF ( particle_dvrpsize /= 'none' ) THEN
3568	IF ( particle_dvrpsize /= 'absw' ) THEN
3569	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3570	' ' // TRIM( particle_color)
3571	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3572	ELSE
3573	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3574	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3575	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3576	ENDIF
3577	ENDIF
3578	ENDIF
3579
3580	!
3581	!-- Check &userpar parameters
3582	CALL user_check_parameters
3583
3584
3585
3586	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |