Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1188

Last change on this file since 1188 was 1182, checked in by raasch, 11 years ago
last commit documented, rc-file for example run updated
Property svn:keywords set to `Id`
File size: 139.6 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1182 2013-06-14 09:07:24Z heinze $
27	!
28	! 1179 2013-06-14 05:57:58Z raasch
29	! checks and settings of buoyancy parameters and switches revised,
30	! initial profile for rho added to hom (id=77)
31	!
32	! 1174 2013-05-31 10:28:08Z gryschka
33	! Bugfix in computing initial profiles for ug, vg, lad, q in case of Atmosphere
34	!
35	! 1159 2013-05-21 11:58:22Z fricke
36	! bc_lr/ns_dirneu/neudir removed
37	!
38	! 1115 2013-03-26 18:16:16Z hoffmann
39	! unused variables removed
40	! drizzle can be used without precipitation
41	!
42	! 1111 2013-03-08 23:54:10Z raasch
43	! ibc_p_b = 2 removed
44	!
45	! 1103 2013-02-20 02:15:53Z raasch
46	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
47	!
48	! 1092 2013-02-02 11:24:22Z raasch
49	! unused variables removed
50	!
51	! 1069 2012-11-28 16:18:43Z maronga
52	! allow usage of topography in combination with cloud physics
53	!
54	! 1065 2012-11-22 17:42:36Z hoffmann
55	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
56	! precipitation in order to save computational resources.
57	!
58	! 1060 2012-11-21 07:19:51Z raasch
59	! additional check for parameter turbulent_inflow
60	!
61	! 1053 2012-11-13 17:11:03Z hoffmann
62	! necessary changes for the new two-moment cloud physics scheme added:
63	! - check cloud physics scheme (Kessler or Seifert and Beheng)
64	! - plant_canopy is not allowed
65	! - currently, only cache loop_optimization is allowed
66	! - initial profiles of nr, qr
67	! - boundary condition of nr, qr
68	! - check output quantities (qr, nr, prr)
69	!
70	! 1036 2012-10-22 13:43:42Z raasch
71	! code put under GPL (PALM 3.9)
72	!
73	! 1031/1034 2012-10-22 11:32:49Z raasch
74	! check of netcdf4 parallel file support
75	!
76	! 1019 2012-09-28 06:46:45Z raasch
77	! non-optimized version of prognostic_equations not allowed any more
78	!
79	! 1015 2012-09-27 09:23:24Z raasch
80	! acc allowed for loop optimization,
81	! checks for adjustment of mixing length to the Prandtl mixing length removed
82	!
83	! 1003 2012-09-14 14:35:53Z raasch
84	! checks for cases with unequal subdomain sizes removed
85	!
86	! 1001 2012-09-13 14:08:46Z raasch
87	! all actions concerning leapfrog- and upstream-spline-scheme removed
88	!
89	! 996 2012-09-07 10:41:47Z raasch
90	! little reformatting
91
92	! 978 2012-08-09 08:28:32Z fricke
93	! setting of bc_lr/ns_dirneu/neudir
94	! outflow damping layer removed
95	! check for z0h*
96	! check for pt_damping_width
97	!
98	! 964 2012-07-26 09:14:24Z raasch
99	! check of old profil-parameters removed
100	!
101	! 940 2012-07-09 14:31:00Z raasch
102	! checks for parameter neutral
103	!
104	! 924 2012-06-06 07:44:41Z maronga
105	! Bugfix: preprocessor directives caused error during compilation
106	!
107	! 892 2012-05-02 13:51:44Z maronga
108	! Bugfix for parameter file check ( excluding __netcdf4 )
109	!
110	! 866 2012-03-28 06:44:41Z raasch
111	! use only 60% of the geostrophic wind as translation speed in case of Galilean
112	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
113	! timestep
114	!
115	! 861 2012-03-26 14:18:34Z suehring
116	! Check for topography and ws-scheme removed.
117	! Check for loop_optimization = 'vector' and ws-scheme removed.
118	!
119	! 845 2012-03-07 10:23:05Z maronga
120	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
121	!
122	! 828 2012-02-21 12:00:36Z raasch
123	! check of collision_kernel extended
124	!
125	! 825 2012-02-19 03:03:44Z raasch
126	! check for collision_kernel and curvature_solution_effects
127	!
128	! 809 2012-01-30 13:32:58Z maronga
129	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
130	!
131	! 807 2012-01-25 11:53:51Z maronga
132	! New cpp directive "__check" implemented which is used by check_namelist_files
133	!
134	! 774 2011-10-27 13:34:16Z letzel
135	! bugfix for prescribed u,v-profiles
136	!
137	! 767 2011-10-14 06:39:12Z raasch
138	! Calculating u,v-profiles from given profiles by linear interpolation.
139	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
140	!
141	! 707 2011-03-29 11:39:40Z raasch
142	! setting of bc_lr/ns_dirrad/raddir
143	!
144	! 689 2011-02-20 19:31:12z gryschka
145	! Bugfix for some logical expressions
146	! (syntax was not compatible with all compilers)
147	!
148	! 680 2011-02-04 23:16:06Z gryschka
149	! init_vortex is not allowed with volume_flow_control
150	!
151	! 673 2011-01-18 16:19:48Z suehring
152	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
153	!
154	! 667 2010-12-23 12:06:00Z suehring/gryschka
155	! Exchange of parameters between ocean and atmosphere via PE0
156	! Check for illegal combination of ws-scheme and timestep scheme.
157	! Check for topography and ws-scheme.
158	! Check for not cyclic boundary conditions in combination with ws-scheme and
159	! loop_optimization = 'vector'.
160	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
161	! Different processor/grid topology in atmosphere and ocean is now allowed!
162	! Bugfixes in checking for conserve_volume_flow_mode
163	! 600 2010-11-24 16:10:51Z raasch
164	! change due to new default value of surface_waterflux
165	! 580 2010-10-05 13:59:11Z heinze
166	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
167	!
168	! 567 2010-10-01 10:46:30Z helmke
169	! calculating masks changed
170	!
171	! 564 2010-09-30 13:18:59Z helmke
172	! palm message identifiers of masked output changed, 20 replaced by max_masks
173	!
174	! 553 2010-09-01 14:09:06Z weinreis
175	! masks is calculated and removed from inipar
176	!
177	! 531 2010-04-21 06:47:21Z heinze
178	! Bugfix: unit of hyp changed to dbar
179	!
180	! 524 2010-03-30 02:04:51Z raasch
181	! Bugfix: "/" in netcdf profile variable names replaced by ":"
182	!
183	! 493 2010-03-01 08:30:24Z raasch
184	! netcdf_data_format is checked
185	!
186	! 411 2009-12-11 14:15:58Z heinze
187	! Enabled passive scalar/humidity wall fluxes for non-flat topography
188	! Initialization of large scale vertical motion (subsidence/ascent)
189	!
190	! 410 2009-12-04 17:05:40Z letzel
191	! masked data output
192	!
193	! 388 2009-09-23 09:40:33Z raasch
194	! Check profiles fpr prho and hyp.
195	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
196	! interval has been set, respective error message is included
197	! bc_lr_cyc and bc_ns_cyc are set,
198	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
199	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
200	! Coupling with independent precursor runs.
201	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
202	! Bugfix: pressure included for profile output
203	! Check pressure gradient conditions
204	! topography_grid_convention moved from user_check_parameters
205	! 'single_street_canyon'
206	! Added shf* and qsws* to the list of available output data
207	!
208	! 222 2009-01-12 16:04:16Z letzel
209	! +user_check_parameters
210	! Output of messages replaced by message handling routine.
211	! Implementation of an MPI-1 coupling: replaced myid with target_id,
212	! deleted __mpi2 directives
213	! Check that PALM is called with mrun -K parallel for coupling
214	!
215	! 197 2008-09-16 15:29:03Z raasch
216	! Bug fix: Construction of vertical profiles when 10 gradients have been
217	! specified in the parameter list (ug, vg, pt, q, sa, lad)
218	!
219	! Strict grid matching along z is not needed for mg-solver.
220	! Leaf area density (LAD) explicitly set to its surface value at k=0
221	! Case of reading data for recycling included in initializing_actions,
222	! check of turbulent_inflow and calculation of recycling_plane.
223	! q*2 profile added
224	!
225	! 138 2007-11-28 10:03:58Z letzel
226	! Plant canopy added
227	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
228	! Multigrid solver allows topography, checking of dt_sort_particles
229	! Bugfix: initializing u_init and v_init in case of ocean runs
230	!
231	! 109 2007-08-28 15:26:47Z letzel
232	! Check coupling_mode and set default (obligatory) values (like boundary
233	! conditions for temperature and fluxes) in case of coupled runs.
234	! +profiles for wp and w"e
235	! Bugfix: Error message concerning output of particle concentration (pc)
236	! modified
237	! More checks and more default values for coupled runs
238	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
239	! cloud_physics = .T.)
240	! Rayleigh damping for ocean fixed.
241	! Check and, if necessary, set default value for dt_coupling
242	!
243	! 97 2007-06-21 08:23:15Z raasch
244	! Initial salinity profile is calculated, salinity boundary conditions are
245	! checked,
246	! z_max_do1d is checked only in case of ocean = .f.,
247	! +initial temperature and geostrophic velocity profiles for the ocean version,
248	! use_pt_reference renamed use_reference
249	!
250	! 89 2007-05-25 12:08:31Z raasch
251	! Check for user-defined profiles
252	!
253	! 75 2007-03-22 09:54:05Z raasch
254	! "by_user" allowed as initializing action, -data_output_ts,
255	! leapfrog with non-flat topography not allowed any more, loop_optimization
256	! and pt_reference are checked, moisture renamed humidity,
257	! output of precipitation amount/rate and roughnes length + check
258	! possible negative humidities are avoided in initial profile,
259	! dirichlet/neumann changed to dirichlet/radiation, etc.,
260	! revision added to run_description_header
261	!
262	! 20 2007-02-26 00:12:32Z raasch
263	! Temperature and humidity gradients at top are now calculated for nzt+1,
264	! top_heatflux and respective boundary condition bc_pt_t is checked
265	!
266	! RCS Log replace by Id keyword, revision history cleaned up
267	!
268	! Revision 1.61 2006/08/04 14:20:25 raasch
269	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
270	! use_upstream_for_tke, default value for dt_dopts,
271	! generation of file header moved from routines palm and header to here
272	!
273	! Revision 1.1 1997/08/26 06:29:23 raasch
274	! Initial revision
275	!
276	!
277	! Description:
278	! ------------
279	! Check control parameters and deduce further quantities.
280	!------------------------------------------------------------------------------!
281
282	USE arrays_3d
283	USE cloud_parameters
284	USE constants
285	USE control_parameters
286	USE dvrp_variables
287	USE grid_variables
288	USE indices
289	USE model_1d
290	USE netcdf_control
291	USE particle_attributes
292	USE pegrid
293	USE profil_parameter
294	USE subsidence_mod
295	USE statistics
296	USE transpose_indices
297
298	IMPLICIT NONE
299
300	CHARACTER (LEN=1) :: sq
301	CHARACTER (LEN=6) :: var
302	CHARACTER (LEN=7) :: unit
303	CHARACTER (LEN=8) :: date
304	CHARACTER (LEN=10) :: time
305	CHARACTER (LEN=40) :: coupling_string
306	CHARACTER (LEN=100) :: action
307
308	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
309	LOGICAL :: found, ldum
310	REAL :: gradient, remote = 0.0, simulation_time_since_reference
311
312	!
313	!-- Warning, if host is not set
314	IF ( host(1:1) == ' ' ) THEN
315	message_string = '"host" is not set. Please check that environment ' // &
316	'variable "localhost" & is set before running PALM'
317	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
318	ENDIF
319
320	!
321	!-- Check the coupling mode
322	IF ( coupling_mode /= 'uncoupled' .AND. &
323	coupling_mode /= 'atmosphere_to_ocean' .AND. &
324	coupling_mode /= 'ocean_to_atmosphere' ) THEN
325	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
326	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
327	ENDIF
328
329	!
330	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
331	IF ( coupling_mode /= 'uncoupled') THEN
332
333	IF ( dt_coupling == 9999999.9 ) THEN
334	message_string = 'dt_coupling is not set but required for coup' // &
335	'ling mode "' // TRIM( coupling_mode ) // '"'
336	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
337	ENDIF
338
339	#if defined( __parallel )
340
341	!
342	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
343	!-- program.
344	!-- check_namelist_files will need the following information of the other
345	!-- model (atmosphere/ocean).
346	! dt_coupling = remote
347	! dt_max = remote
348	! restart_time = remote
349	! dt_restart= remote
350	! simulation_time_since_reference = remote
351	! dx = remote
352
353
354	#if ! defined( __check )
355	IF ( myid == 0 ) THEN
356	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
357	ierr )
358	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
359	status, ierr )
360	ENDIF
361	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
362	#endif
363	IF ( dt_coupling /= remote ) THEN
364	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
365	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
366	'dt_coupling_remote = ', remote
367	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
368	ENDIF
369	IF ( dt_coupling <= 0.0 ) THEN
370	#if ! defined( __check )
371	IF ( myid == 0 ) THEN
372	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
373	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
374	status, ierr )
375	ENDIF
376	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
377	#endif
378	dt_coupling = MAX( dt_max, remote )
379	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
380	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
381	'MAX(dt_max(A,O)) = ', dt_coupling
382	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
383	ENDIF
384	#if ! defined( __check )
385	IF ( myid == 0 ) THEN
386	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
387	ierr )
388	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
389	status, ierr )
390	ENDIF
391	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
392	#endif
393	IF ( restart_time /= remote ) THEN
394	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
395	'": restart_time = ', restart_time, '& is not equal to ', &
396	'restart_time_remote = ', remote
397	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
398	ENDIF
399	#if ! defined( __check )
400	IF ( myid == 0 ) THEN
401	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
402	ierr )
403	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
404	status, ierr )
405	ENDIF
406	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
407	#endif
408	IF ( dt_restart /= remote ) THEN
409	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
410	'": dt_restart = ', dt_restart, '& is not equal to ', &
411	'dt_restart_remote = ', remote
412	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
413	ENDIF
414
415	simulation_time_since_reference = end_time - coupling_start_time
416	#if ! defined( __check )
417	IF ( myid == 0 ) THEN
418	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
419	14, comm_inter, ierr )
420	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
421	status, ierr )
422	ENDIF
423	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
424	#endif
425	IF ( simulation_time_since_reference /= remote ) THEN
426	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
427	'": simulation_time_since_reference = ', &
428	simulation_time_since_reference, '& is not equal to ', &
429	'simulation_time_since_reference_remote = ', remote
430	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
431	ENDIF
432
433	#if ! defined( __check )
434	IF ( myid == 0 ) THEN
435	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
436	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
437	status, ierr )
438	ENDIF
439	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
440
441	#endif
442	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
443
444	IF ( dx < remote ) THEN
445	WRITE( message_string, * ) 'coupling mode "', &
446	TRIM( coupling_mode ), &
447	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
448	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
449	ENDIF
450
451	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
452	WRITE( message_string, * ) 'coupling mode "', &
453	TRIM( coupling_mode ), &
454	'": Domain size in x-direction is not equal in ocean and atmosphere'
455	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
456	ENDIF
457
458	ENDIF
459
460	#if ! defined( __check )
461	IF ( myid == 0) THEN
462	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
463	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
464	status, ierr )
465	ENDIF
466	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
467	#endif
468	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
469
470	IF ( dy < remote ) THEN
471	WRITE( message_string, * ) 'coupling mode "', &
472	TRIM( coupling_mode ), &
473	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
474	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
475	ENDIF
476
477	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
478	WRITE( message_string, * ) 'coupling mode "', &
479	TRIM( coupling_mode ), &
480	'": Domain size in y-direction is not equal in ocean and atmosphere'
481	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
482	ENDIF
483
484	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
485	WRITE( message_string, * ) 'coupling mode "', &
486	TRIM( coupling_mode ), &
487	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
488	' atmosphere'
489	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
490	ENDIF
491
492	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
493	WRITE( message_string, * ) 'coupling mode "', &
494	TRIM( coupling_mode ), &
495	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
496	' atmosphere'
497	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
498	ENDIF
499
500	ENDIF
501	#else
502	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
503	' ''mrun -K parallel'''
504	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
505	#endif
506	ENDIF
507
508	#if defined( __parallel ) && ! defined ( __check )
509	!
510	!-- Exchange via intercommunicator
511	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
512	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
513	ierr )
514	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
515	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
516	comm_inter, status, ierr )
517	ENDIF
518	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
519
520	#endif
521
522
523	!
524	!-- Generate the file header which is used as a header for most of PALM's
525	!-- output files
526	CALL DATE_AND_TIME( date, time )
527	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
528	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
529	IF ( coupling_mode == 'uncoupled' ) THEN
530	coupling_string = ''
531	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
532	coupling_string = ' coupled (atmosphere)'
533	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
534	coupling_string = ' coupled (ocean)'
535	ENDIF
536
537	WRITE ( run_description_header, &
538	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
539	TRIM( version ), TRIM( revision ), 'run: ', &
540	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
541	'host: ', TRIM( host ), run_date, run_time
542
543	!
544	!-- Check the general loop optimization method
545	IF ( loop_optimization == 'default' ) THEN
546	IF ( host(1:3) == 'nec' ) THEN
547	loop_optimization = 'vector'
548	ELSE
549	loop_optimization = 'cache'
550	ENDIF
551	ENDIF
552
553	SELECT CASE ( TRIM( loop_optimization ) )
554
555	CASE ( 'acc', 'cache', 'vector' )
556	CONTINUE
557
558	CASE DEFAULT
559	message_string = 'illegal value given for loop_optimization: "' // &
560	TRIM( loop_optimization ) // '"'
561	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
562
563	END SELECT
564
565	!
566	!-- Check topography setting (check for illegal parameter combinations)
567	IF ( topography /= 'flat' ) THEN
568	action = ' '
569	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
570	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
571	ENDIF
572	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
573	THEN
574	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
575	ENDIF
576	IF ( psolver == 'sor' ) THEN
577	WRITE( action, '(A,A)' ) 'psolver = ', psolver
578	ENDIF
579	IF ( sloping_surface ) THEN
580	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
581	ENDIF
582	IF ( galilei_transformation ) THEN
583	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
584	ENDIF
585	IF ( cloud_physics ) THEN
586	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
587	ENDIF
588	IF ( cloud_droplets ) THEN
589	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
590	ENDIF
591	IF ( .NOT. prandtl_layer ) THEN
592	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
593	ENDIF
594	IF ( action /= ' ' ) THEN
595	message_string = 'a non-flat topography does not allow ' // &
596	TRIM( action )
597	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
598	ENDIF
599	!
600	!-- In case of non-flat topography, check whether the convention how to
601	!-- define the topography grid has been set correctly, or whether the default
602	!-- is applicable. If this is not possible, abort.
603	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
604	IF ( TRIM( topography ) /= 'single_building' .AND. &
605	TRIM( topography ) /= 'single_street_canyon' .AND. &
606	TRIM( topography ) /= 'read_from_file' ) THEN
607	!-- The default value is not applicable here, because it is only valid
608	!-- for the two standard cases 'single_building' and 'read_from_file'
609	!-- defined in init_grid.
610	WRITE( message_string, * ) &
611	'The value for "topography_grid_convention" ', &
612	'is not set. Its default value is & only valid for ', &
613	'"topography" = ''single_building'', ', &
614	'''single_street_canyon'' & or ''read_from_file''.', &
615	' & Choose ''cell_edge'' or ''cell_center''.'
616	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
617	ELSE
618	!-- The default value is applicable here.
619	!-- Set convention according to topography.
620	IF ( TRIM( topography ) == 'single_building' .OR. &
621	TRIM( topography ) == 'single_street_canyon' ) THEN
622	topography_grid_convention = 'cell_edge'
623	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
624	topography_grid_convention = 'cell_center'
625	ENDIF
626	ENDIF
627	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
628	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
629	WRITE( message_string, * ) &
630	'The value for "topography_grid_convention" is ', &
631	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
632	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
633	ENDIF
634
635	ENDIF
636
637	!
638	!-- Check ocean setting
639	IF ( ocean ) THEN
640
641	action = ' '
642	IF ( action /= ' ' ) THEN
643	message_string = 'ocean = .T. does not allow ' // TRIM( action )
644	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
645	ENDIF
646
647	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
648	TRIM( coupling_char ) == '_O' ) THEN
649
650	!
651	!-- Check whether an (uncoupled) atmospheric run has been declared as an
652	!-- ocean run (this setting is done via mrun-option -y)
653
654	message_string = 'ocean = .F. does not allow coupling_char = "' // &
655	TRIM( coupling_char ) // '" set by mrun-option "-y"'
656	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
657
658	ENDIF
659	!
660	!-- Check cloud scheme
661	IF ( cloud_scheme == 'seifert_beheng' ) THEN
662	icloud_scheme = 0
663	ELSEIF ( cloud_scheme == 'kessler' ) THEN
664	icloud_scheme = 1
665	ELSE
666	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
667	TRIM( cloud_scheme ) // '"'
668	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
669	ENDIF
670	!
671	!-- Check whether there are any illegal values
672	!-- Pressure solver:
673	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
674	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
675	message_string = 'unknown solver for perturbation pressure: psolver' // &
676	' = "' // TRIM( psolver ) // '"'
677	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
678	ENDIF
679
680	#if defined( __parallel )
681	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
682	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
683	'for a 1d domain-decomposition along x & please do' // &
684	' not set npey/=1 in the parameter file'
685	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
686	ENDIF
687	#else
688	IF ( psolver == 'poisfft_hybrid' ) THEN
689	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
690	' for a parallel environment'
691	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
692	ENDIF
693	#endif
694
695	IF ( psolver == 'multigrid' ) THEN
696	IF ( cycle_mg == 'w' ) THEN
697	gamma_mg = 2
698	ELSEIF ( cycle_mg == 'v' ) THEN
699	gamma_mg = 1
700	ELSE
701	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
702	TRIM( cycle_mg ) // '"'
703	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
704	ENDIF
705	ENDIF
706
707	IF ( fft_method /= 'singleton-algorithm' .AND. &
708	fft_method /= 'temperton-algorithm' .AND. &
709	fft_method /= 'system-specific' ) THEN
710	message_string = 'unknown fft-algorithm: fft_method = "' // &
711	TRIM( fft_method ) // '"'
712	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
713	ENDIF
714
715	IF( momentum_advec == 'ws-scheme' .AND. &
716	.NOT. call_psolver_at_all_substeps ) THEN
717	message_string = 'psolver must be called at each RK3 substep when "'//&
718	TRIM(momentum_advec) // ' "is used for momentum_advec'
719	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
720	END IF
721	!
722	!-- Advection schemes:
723	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
724	THEN
725	message_string = 'unknown advection scheme: momentum_advec = "' // &
726	TRIM( momentum_advec ) // '"'
727	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
728	ENDIF
729	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
730	.AND. ( timestep_scheme == 'euler' .OR. &
731	timestep_scheme == 'runge-kutta-2' ) ) &
732	THEN
733	message_string = 'momentum_advec or scalar_advec = "' &
734	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
735	TRIM( timestep_scheme ) // '"'
736	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
737	ENDIF
738	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
739	scalar_advec /= 'bc-scheme' ) &
740	THEN
741	message_string = 'unknown advection scheme: scalar_advec = "' // &
742	TRIM( scalar_advec ) // '"'
743	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
744	ENDIF
745	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
746	THEN
747	message_string = 'advection_scheme scalar_advec = "' &
748	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
749	TRIM( loop_optimization ) // '"'
750	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
751	ENDIF
752
753	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
754	use_upstream_for_tke = .TRUE.
755	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
756	'use_sgs_for_particles = .TRUE.'
757	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
758	ENDIF
759
760	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
761	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
762	'curvature_solution_effects = .TRUE.'
763	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
764	ENDIF
765
766	!
767	!-- Set LOGICAL switches to enhance performance
768	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
769	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
770
771	!
772	!-- Timestep schemes:
773	SELECT CASE ( TRIM( timestep_scheme ) )
774
775	CASE ( 'euler' )
776	intermediate_timestep_count_max = 1
777
778	CASE ( 'runge-kutta-2' )
779	intermediate_timestep_count_max = 2
780
781	CASE ( 'runge-kutta-3' )
782	intermediate_timestep_count_max = 3
783
784	CASE DEFAULT
785	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
786	TRIM( timestep_scheme ) // '"'
787	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
788
789	END SELECT
790
791	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
792	.AND. timestep_scheme(1:5) == 'runge' ) THEN
793	message_string = 'momentum advection scheme "' // &
794	TRIM( momentum_advec ) // '" & does not work with ' // &
795	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
796	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
797	ENDIF
798
799	!
800	!-- Collision kernels:
801	SELECT CASE ( TRIM( collision_kernel ) )
802
803	CASE ( 'hall', 'hall_fast' )
804	hall_kernel = .TRUE.
805
806	CASE ( 'palm' )
807	palm_kernel = .TRUE.
808
809	CASE ( 'wang', 'wang_fast' )
810	wang_kernel = .TRUE.
811
812	CASE ( 'none' )
813
814
815	CASE DEFAULT
816	message_string = 'unknown collision kernel: collision_kernel = "' // &
817	TRIM( collision_kernel ) // '"'
818	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
819
820	END SELECT
821	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
822
823	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
824	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
825	!
826	!-- No restart run: several initialising actions are possible
827	action = initializing_actions
828	DO WHILE ( TRIM( action ) /= '' )
829	position = INDEX( action, ' ' )
830	SELECT CASE ( action(1:position-1) )
831
832	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
833	'by_user', 'initialize_vortex', 'initialize_ptanom' )
834	action = action(position+1:)
835
836	CASE DEFAULT
837	message_string = 'initializing_action = "' // &
838	TRIM( action ) // '" unkown or not allowed'
839	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
840
841	END SELECT
842	ENDDO
843	ENDIF
844
845	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
846	conserve_volume_flow ) THEN
847	message_string = 'initializing_actions = "initialize_vortex"' // &
848	' ist not allowed with conserve_volume_flow = .T.'
849	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
850	ENDIF
851
852
853	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
854	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
855	message_string = 'initializing_actions = "set_constant_profiles"' // &
856	' and "set_1d-model_profiles" are not allowed ' // &
857	'simultaneously'
858	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
859	ENDIF
860
861	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
862	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
863	message_string = 'initializing_actions = "set_constant_profiles"' // &
864	' and "by_user" are not allowed simultaneously'
865	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
866	ENDIF
867
868	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
869	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
870	message_string = 'initializing_actions = "by_user" and ' // &
871	'"set_1d-model_profiles" are not allowed simultaneously'
872	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
873	ENDIF
874
875	IF ( cloud_physics .AND. .NOT. humidity ) THEN
876	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
877	'not allowed with humidity = ', humidity
878	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
879	ENDIF
880
881	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
882	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
883	'not allowed with cloud_physics = ', cloud_physics
884	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
885	ENDIF
886
887	IF ( humidity .AND. sloping_surface ) THEN
888	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
889	'are not allowed simultaneously'
890	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
891	ENDIF
892
893	IF ( passive_scalar .AND. humidity ) THEN
894	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
895	'is not allowed simultaneously'
896	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
897	ENDIF
898
899	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
900	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
901	'coefficient & given value is drag_coefficient = 0.0'
902	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
903	ENDIF
904
905	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
906	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
907	' seifert_beheng'
908	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
909	ENDIF
910
911	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
912	icloud_scheme == 0 ) THEN
913	message_string = 'cloud_scheme = seifert_beheng requires ' // &
914	'loop_optimization = cache'
915	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
916	ENDIF
917
918	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
919	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
920	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
921	! 'precipitation = .TRUE. or drizzle = .TRUE.'
922	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
923	! ENDIF
924
925	!
926	!-- In case of no model continuation run, check initialising parameters and
927	!-- deduce further quantities
928	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
929
930	!
931	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
932	pt_init = pt_surface
933	IF ( humidity ) THEN
934	q_init = q_surface
935	ENDIF
936	IF ( ocean ) sa_init = sa_surface
937	IF ( passive_scalar ) q_init = s_surface
938	IF ( plant_canopy ) lad = 0.0
939
940	!
941	!--
942	!-- If required, compute initial profile of the geostrophic wind
943	!-- (component ug)
944	i = 1
945	gradient = 0.0
946
947	IF ( .NOT. ocean ) THEN
948
949	ug_vertical_gradient_level_ind(1) = 0
950	ug(0) = ug_surface
951	DO k = 1, nzt+1
952	IF ( i < 11 ) THEN
953	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
954	ug_vertical_gradient_level(i) >= 0.0 ) THEN
955	gradient = ug_vertical_gradient(i) / 100.0
956	ug_vertical_gradient_level_ind(i) = k - 1
957	i = i + 1
958	ENDIF
959	ENDIF
960	IF ( gradient /= 0.0 ) THEN
961	IF ( k /= 1 ) THEN
962	ug(k) = ug(k-1) + dzu(k) * gradient
963	ELSE
964	ug(k) = ug_surface + dzu(k) * gradient
965	ENDIF
966	ELSE
967	ug(k) = ug(k-1)
968	ENDIF
969	ENDDO
970
971	ELSE
972
973	ug_vertical_gradient_level_ind(1) = nzt+1
974	ug(nzt+1) = ug_surface
975	DO k = nzt, nzb, -1
976	IF ( i < 11 ) THEN
977	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
978	ug_vertical_gradient_level(i) <= 0.0 ) THEN
979	gradient = ug_vertical_gradient(i) / 100.0
980	ug_vertical_gradient_level_ind(i) = k + 1
981	i = i + 1
982	ENDIF
983	ENDIF
984	IF ( gradient /= 0.0 ) THEN
985	IF ( k /= nzt ) THEN
986	ug(k) = ug(k+1) - dzu(k+1) * gradient
987	ELSE
988	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
989	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
990	ENDIF
991	ELSE
992	ug(k) = ug(k+1)
993	ENDIF
994	ENDDO
995
996	ENDIF
997
998	!
999	!-- In case of no given gradients for ug, choose a zero gradient
1000	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
1001	ug_vertical_gradient_level(1) = 0.0
1002	ENDIF
1003
1004	!
1005	!--
1006	!-- If required, compute initial profile of the geostrophic wind
1007	!-- (component vg)
1008	i = 1
1009	gradient = 0.0
1010
1011	IF ( .NOT. ocean ) THEN
1012
1013	vg_vertical_gradient_level_ind(1) = 0
1014	vg(0) = vg_surface
1015	DO k = 1, nzt+1
1016	IF ( i < 11 ) THEN
1017	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1018	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1019	gradient = vg_vertical_gradient(i) / 100.0
1020	vg_vertical_gradient_level_ind(i) = k - 1
1021	i = i + 1
1022	ENDIF
1023	ENDIF
1024	IF ( gradient /= 0.0 ) THEN
1025	IF ( k /= 1 ) THEN
1026	vg(k) = vg(k-1) + dzu(k) * gradient
1027	ELSE
1028	vg(k) = vg_surface + dzu(k) * gradient
1029	ENDIF
1030	ELSE
1031	vg(k) = vg(k-1)
1032	ENDIF
1033	ENDDO
1034
1035	ELSE
1036
1037	vg_vertical_gradient_level_ind(1) = nzt+1
1038	vg(nzt+1) = vg_surface
1039	DO k = nzt, nzb, -1
1040	IF ( i < 11 ) THEN
1041	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1042	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1043	gradient = vg_vertical_gradient(i) / 100.0
1044	vg_vertical_gradient_level_ind(i) = k + 1
1045	i = i + 1
1046	ENDIF
1047	ENDIF
1048	IF ( gradient /= 0.0 ) THEN
1049	IF ( k /= nzt ) THEN
1050	vg(k) = vg(k+1) - dzu(k+1) * gradient
1051	ELSE
1052	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1053	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1054	ENDIF
1055	ELSE
1056	vg(k) = vg(k+1)
1057	ENDIF
1058	ENDDO
1059
1060	ENDIF
1061
1062	!
1063	!-- In case of no given gradients for vg, choose a zero gradient
1064	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1065	vg_vertical_gradient_level(1) = 0.0
1066	ENDIF
1067
1068	!
1069	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1070	!-- interpolate them from wind profile data (if given)
1071	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1072
1073	u_init = ug
1074	v_init = vg
1075
1076	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1077
1078	IF ( uv_heights(1) /= 0.0 ) THEN
1079	message_string = 'uv_heights(1) must be 0.0'
1080	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1081	ENDIF
1082
1083	use_prescribed_profile_data = .TRUE.
1084
1085	kk = 1
1086	u_init(0) = 0.0
1087	v_init(0) = 0.0
1088
1089	DO k = 1, nz+1
1090
1091	IF ( kk < 100 ) THEN
1092	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1093	kk = kk + 1
1094	IF ( kk == 100 ) EXIT
1095	ENDDO
1096	ENDIF
1097
1098	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1099	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1100	( uv_heights(kk+1) - uv_heights(kk) ) * &
1101	( u_profile(kk+1) - u_profile(kk) )
1102	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1103	( uv_heights(kk+1) - uv_heights(kk) ) * &
1104	( v_profile(kk+1) - v_profile(kk) )
1105	ELSE
1106	u_init(k) = u_profile(kk)
1107	v_init(k) = v_profile(kk)
1108	ENDIF
1109
1110	ENDDO
1111
1112	ELSE
1113
1114	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1115	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1116
1117	ENDIF
1118
1119	!
1120	!-- Compute initial temperature profile using the given temperature gradients
1121	IF ( .NOT. neutral ) THEN
1122
1123	i = 1
1124	gradient = 0.0
1125
1126	IF ( .NOT. ocean ) THEN
1127
1128	pt_vertical_gradient_level_ind(1) = 0
1129	DO k = 1, nzt+1
1130	IF ( i < 11 ) THEN
1131	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1132	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1133	gradient = pt_vertical_gradient(i) / 100.0
1134	pt_vertical_gradient_level_ind(i) = k - 1
1135	i = i + 1
1136	ENDIF
1137	ENDIF
1138	IF ( gradient /= 0.0 ) THEN
1139	IF ( k /= 1 ) THEN
1140	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1141	ELSE
1142	pt_init(k) = pt_surface + dzu(k) * gradient
1143	ENDIF
1144	ELSE
1145	pt_init(k) = pt_init(k-1)
1146	ENDIF
1147	ENDDO
1148
1149	ELSE
1150
1151	pt_vertical_gradient_level_ind(1) = nzt+1
1152	DO k = nzt, 0, -1
1153	IF ( i < 11 ) THEN
1154	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1155	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1156	gradient = pt_vertical_gradient(i) / 100.0
1157	pt_vertical_gradient_level_ind(i) = k + 1
1158	i = i + 1
1159	ENDIF
1160	ENDIF
1161	IF ( gradient /= 0.0 ) THEN
1162	IF ( k /= nzt ) THEN
1163	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1164	ELSE
1165	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1166	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1167	ENDIF
1168	ELSE
1169	pt_init(k) = pt_init(k+1)
1170	ENDIF
1171	ENDDO
1172
1173	ENDIF
1174
1175	ENDIF
1176
1177	!
1178	!-- In case of no given temperature gradients, choose gradient of neutral
1179	!-- stratification
1180	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1181	pt_vertical_gradient_level(1) = 0.0
1182	ENDIF
1183
1184	!
1185	!-- Store temperature gradient at the top boundary for possible Neumann
1186	!-- boundary condition
1187	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1188
1189	!
1190	!-- If required, compute initial humidity or scalar profile using the given
1191	!-- humidity/scalar gradient. In case of scalar transport, initially store
1192	!-- values of the scalar parameters on humidity parameters
1193	IF ( passive_scalar ) THEN
1194	bc_q_b = bc_s_b
1195	bc_q_t = bc_s_t
1196	q_surface = s_surface
1197	q_surface_initial_change = s_surface_initial_change
1198	q_vertical_gradient = s_vertical_gradient
1199	q_vertical_gradient_level = s_vertical_gradient_level
1200	surface_waterflux = surface_scalarflux
1201	wall_humidityflux = wall_scalarflux
1202	ENDIF
1203
1204	IF ( humidity .OR. passive_scalar ) THEN
1205
1206	i = 1
1207	gradient = 0.0
1208	q_vertical_gradient_level_ind(1) = 0
1209	DO k = 1, nzt+1
1210	IF ( i < 11 ) THEN
1211	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1212	q_vertical_gradient_level(i) >= 0.0 ) THEN
1213	gradient = q_vertical_gradient(i) / 100.0
1214	q_vertical_gradient_level_ind(i) = k - 1
1215	i = i + 1
1216	ENDIF
1217	ENDIF
1218	IF ( gradient /= 0.0 ) THEN
1219	IF ( k /= 1 ) THEN
1220	q_init(k) = q_init(k-1) + dzu(k) * gradient
1221	ELSE
1222	q_init(k) = q_init(k-1) + dzu(k) * gradient
1223	ENDIF
1224	ELSE
1225	q_init(k) = q_init(k-1)
1226	ENDIF
1227	!
1228	!-- Avoid negative humidities
1229	IF ( q_init(k) < 0.0 ) THEN
1230	q_init(k) = 0.0
1231	ENDIF
1232	ENDDO
1233
1234	!
1235	!-- In case of no given humidity gradients, choose zero gradient
1236	!-- conditions
1237	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1238	q_vertical_gradient_level(1) = 0.0
1239	ENDIF
1240	!
1241	!-- Store humidity, rain water content and rain drop concentration
1242	!-- gradient at the top boundary for possile Neumann boundary condition
1243	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1244	ENDIF
1245
1246	!
1247	!-- If required, compute initial salinity profile using the given salinity
1248	!-- gradients
1249	IF ( ocean ) THEN
1250
1251	i = 1
1252	gradient = 0.0
1253
1254	sa_vertical_gradient_level_ind(1) = nzt+1
1255	DO k = nzt, 0, -1
1256	IF ( i < 11 ) THEN
1257	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1258	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1259	gradient = sa_vertical_gradient(i) / 100.0
1260	sa_vertical_gradient_level_ind(i) = k + 1
1261	i = i + 1
1262	ENDIF
1263	ENDIF
1264	IF ( gradient /= 0.0 ) THEN
1265	IF ( k /= nzt ) THEN
1266	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1267	ELSE
1268	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1269	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1270	ENDIF
1271	ELSE
1272	sa_init(k) = sa_init(k+1)
1273	ENDIF
1274	ENDDO
1275
1276	ENDIF
1277
1278	!
1279	!-- If required compute the profile of leaf area density used in the plant
1280	!-- canopy model
1281	IF ( plant_canopy ) THEN
1282
1283	i = 1
1284	gradient = 0.0
1285
1286	IF ( .NOT. ocean ) THEN
1287
1288	lad(0) = lad_surface
1289
1290	lad_vertical_gradient_level_ind(1) = 0
1291	DO k = 1, pch_index
1292	IF ( i < 11 ) THEN
1293	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1294	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1295	gradient = lad_vertical_gradient(i)
1296	lad_vertical_gradient_level_ind(i) = k - 1
1297	i = i + 1
1298	ENDIF
1299	ENDIF
1300	IF ( gradient /= 0.0 ) THEN
1301	IF ( k /= 1 ) THEN
1302	lad(k) = lad(k-1) + dzu(k) * gradient
1303	ELSE
1304	lad(k) = lad_surface + dzu(k) *gradient
1305	ENDIF
1306	ELSE
1307	lad(k) = lad(k-1)
1308	ENDIF
1309	ENDDO
1310
1311	ENDIF
1312
1313	!
1314	!-- In case of no given leaf area density gradients, choose a vanishing
1315	!-- gradient
1316	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1317	lad_vertical_gradient_level(1) = 0.0
1318	ENDIF
1319
1320	ENDIF
1321
1322	ENDIF
1323
1324	!
1325	!-- Initialize large scale subsidence if required
1326	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1327	large_scale_subsidence = .TRUE.
1328	CALL init_w_subsidence
1329	ENDIF
1330
1331	!
1332	!-- Compute Coriolis parameter
1333	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1334	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1335
1336	!
1337	!-- Check and set buoyancy related parameters and switches
1338	IF ( reference_state == 'horizontal_average' ) THEN
1339	CONTINUE
1340	ELSEIF ( reference_state == 'initial_profile' ) THEN
1341	use_initial_profile_as_reference = .TRUE.
1342	ELSEIF ( reference_state == 'single_value' ) THEN
1343	use_single_reference_value = .TRUE.
1344	IF ( pt_reference == 9999999.9 ) pt_reference = pt_surface
1345	vpt_reference = pt_reference * ( 1.0 + 0.61 * q_surface )
1346	ELSE
1347	message_string = 'illegal value for reference_state: "' // &
1348	TRIM( reference_state ) // '"'
1349	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1350	ENDIF
1351
1352	!
1353	!-- Ocean runs always use reference values in the buoyancy term
1354	IF ( ocean ) THEN
1355	reference_state = 'single_value'
1356	use_single_reference_value = .TRUE.
1357	ENDIF
1358
1359	!
1360	!-- Sign of buoyancy/stability terms
1361	IF ( ocean ) atmos_ocean_sign = -1.0
1362
1363	!
1364	!-- Ocean version must use flux boundary conditions at the top
1365	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1366	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1367	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1368	ENDIF
1369
1370	!
1371	!-- In case of a given slope, compute the relevant quantities
1372	IF ( alpha_surface /= 0.0 ) THEN
1373	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1374	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1375	' ) must be < 90.0'
1376	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1377	ENDIF
1378	sloping_surface = .TRUE.
1379	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1380	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1381	ENDIF
1382
1383	!
1384	!-- Check time step and cfl_factor
1385	IF ( dt /= -1.0 ) THEN
1386	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1387	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1388	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1389	ENDIF
1390	dt_3d = dt
1391	dt_fixed = .TRUE.
1392	ENDIF
1393
1394	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1395	IF ( cfl_factor == -1.0 ) THEN
1396	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1397	cfl_factor = 0.8
1398	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1399	cfl_factor = 0.9
1400	ELSE
1401	cfl_factor = 0.9
1402	ENDIF
1403	ELSE
1404	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1405	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1406	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1407	ENDIF
1408	ENDIF
1409
1410	!
1411	!-- Store simulated time at begin
1412	simulated_time_at_begin = simulated_time
1413
1414	!
1415	!-- Store reference time for coupled runs and change the coupling flag,
1416	!-- if ...
1417	IF ( simulated_time == 0.0 ) THEN
1418	IF ( coupling_start_time == 0.0 ) THEN
1419	time_since_reference_point = 0.0
1420	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1421	run_coupled = .FALSE.
1422	ENDIF
1423	ENDIF
1424
1425	!
1426	!-- Set wind speed in the Galilei-transformed system
1427	IF ( galilei_transformation ) THEN
1428	IF ( use_ug_for_galilei_tr .AND. &
1429	ug_vertical_gradient_level(1) == 0.0 .AND. &
1430	ug_vertical_gradient(1) == 0.0 .AND. &
1431	vg_vertical_gradient_level(1) == 0.0 .AND. &
1432	vg_vertical_gradient(1) == 0.0 ) THEN
1433	u_gtrans = ug_surface * 0.6
1434	v_gtrans = vg_surface * 0.6
1435	ELSEIF ( use_ug_for_galilei_tr .AND. &
1436	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1437	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1438	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1439	' with galilei transformation'
1440	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1441	ELSEIF ( use_ug_for_galilei_tr .AND. &
1442	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1443	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1444	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1445	' with galilei transformation'
1446	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1447	ELSE
1448	message_string = 'variable translation speed used for galilei-' // &
1449	'transformation, which may cause & instabilities in stably ' // &
1450	'stratified regions'
1451	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1452	ENDIF
1453	ENDIF
1454
1455	!
1456	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1457	!-- fluxes have to be used in the diffusion-terms
1458	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1459
1460	!
1461	!-- Check boundary conditions and set internal variables:
1462	!-- Lateral boundary conditions
1463	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1464	bc_lr /= 'radiation/dirichlet' ) THEN
1465	message_string = 'unknown boundary condition: bc_lr = "' // &
1466	TRIM( bc_lr ) // '"'
1467	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1468	ENDIF
1469	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1470	bc_ns /= 'radiation/dirichlet' ) THEN
1471	message_string = 'unknown boundary condition: bc_ns = "' // &
1472	TRIM( bc_ns ) // '"'
1473	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1474	ENDIF
1475
1476	!
1477	!-- Internal variables used for speed optimization in if clauses
1478	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1479	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1480	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1481	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1482	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1483	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1484
1485	!
1486	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1487	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1488	!-- and tools do not work with non-cyclic boundary conditions.
1489	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1490	IF ( psolver /= 'multigrid' ) THEN
1491	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1492	'psolver = "' // TRIM( psolver ) // '"'
1493	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1494	ENDIF
1495	IF ( momentum_advec /= 'pw-scheme' .AND. &
1496	momentum_advec /= 'ws-scheme') THEN
1497	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1498	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1499	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1500	ENDIF
1501	IF ( scalar_advec /= 'pw-scheme' .AND. &
1502	scalar_advec /= 'ws-scheme' ) THEN
1503	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1504	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1505	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1506	ENDIF
1507	IF ( galilei_transformation ) THEN
1508	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1509	'galilei_transformation = .T.'
1510	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1511	ENDIF
1512	ENDIF
1513
1514	!
1515	!-- Bottom boundary condition for the turbulent Kinetic energy
1516	IF ( bc_e_b == 'neumann' ) THEN
1517	ibc_e_b = 1
1518	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1519	ibc_e_b = 2
1520	IF ( prandtl_layer ) THEN
1521	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1522	TRIM( bc_e_b ) // '"'
1523	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1524	ENDIF
1525	IF ( .NOT. prandtl_layer ) THEN
1526	bc_e_b = 'neumann'
1527	ibc_e_b = 1
1528	message_string = 'boundary condition bc_e_b changed to "' // &
1529	TRIM( bc_e_b ) // '"'
1530	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1531	ENDIF
1532	ELSE
1533	message_string = 'unknown boundary condition: bc_e_b = "' // &
1534	TRIM( bc_e_b ) // '"'
1535	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1536	ENDIF
1537
1538	!
1539	!-- Boundary conditions for perturbation pressure
1540	IF ( bc_p_b == 'dirichlet' ) THEN
1541	ibc_p_b = 0
1542	ELSEIF ( bc_p_b == 'neumann' ) THEN
1543	ibc_p_b = 1
1544	ELSE
1545	message_string = 'unknown boundary condition: bc_p_b = "' // &
1546	TRIM( bc_p_b ) // '"'
1547	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1548	ENDIF
1549
1550	IF ( bc_p_t == 'dirichlet' ) THEN
1551	ibc_p_t = 0
1552	ELSEIF ( bc_p_t == 'neumann' ) THEN
1553	ibc_p_t = 1
1554	ELSE
1555	message_string = 'unknown boundary condition: bc_p_t = "' // &
1556	TRIM( bc_p_t ) // '"'
1557	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1558	ENDIF
1559
1560	!
1561	!-- Boundary conditions for potential temperature
1562	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1563	ibc_pt_b = 2
1564	ELSE
1565	IF ( bc_pt_b == 'dirichlet' ) THEN
1566	ibc_pt_b = 0
1567	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1568	ibc_pt_b = 1
1569	ELSE
1570	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1571	TRIM( bc_pt_b ) // '"'
1572	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1573	ENDIF
1574	ENDIF
1575
1576	IF ( bc_pt_t == 'dirichlet' ) THEN
1577	ibc_pt_t = 0
1578	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1579	ibc_pt_t = 1
1580	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1581	ibc_pt_t = 2
1582	ELSE
1583	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1584	TRIM( bc_pt_t ) // '"'
1585	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1586	ENDIF
1587
1588	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1589	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1590
1591	IF ( neutral ) THEN
1592
1593	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1594	THEN
1595	message_string = 'heatflux must not be set for pure neutral flow'
1596	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1597	ENDIF
1598
1599	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1600	THEN
1601	message_string = 'heatflux must not be set for pure neutral flow'
1602	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1603	ENDIF
1604
1605	ENDIF
1606
1607	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1608	top_momentumflux_v /= 9999999.9 ) THEN
1609	constant_top_momentumflux = .TRUE.
1610	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1611	top_momentumflux_v == 9999999.9 ) ) THEN
1612	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1613	'must be set'
1614	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1615	ENDIF
1616
1617	!
1618	!-- A given surface temperature implies Dirichlet boundary condition for
1619	!-- temperature. In this case specification of a constant heat flux is
1620	!-- forbidden.
1621	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1622	surface_heatflux /= 0.0 ) THEN
1623	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1624	'& is not allowed with constant_heatflux = .TRUE.'
1625	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1626	ENDIF
1627	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1628	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1629	'wed with pt_surface_initial_change (/=0) = ', &
1630	pt_surface_initial_change
1631	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1632	ENDIF
1633
1634	!
1635	!-- A given temperature at the top implies Dirichlet boundary condition for
1636	!-- temperature. In this case specification of a constant heat flux is
1637	!-- forbidden.
1638	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1639	top_heatflux /= 0.0 ) THEN
1640	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1641	'" is not allowed with constant_top_heatflux = .TRUE.'
1642	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1643	ENDIF
1644
1645	!
1646	!-- Boundary conditions for salinity
1647	IF ( ocean ) THEN
1648	IF ( bc_sa_t == 'dirichlet' ) THEN
1649	ibc_sa_t = 0
1650	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1651	ibc_sa_t = 1
1652	ELSE
1653	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1654	TRIM( bc_sa_t ) // '"'
1655	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1656	ENDIF
1657
1658	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1659	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1660	message_string = 'boundary condition: bc_sa_t = "' // &
1661	TRIM( bc_sa_t ) // '" requires to set ' // &
1662	'top_salinityflux'
1663	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1664	ENDIF
1665
1666	!
1667	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1668	!-- salinity. In this case specification of a constant salinity flux is
1669	!-- forbidden.
1670	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1671	top_salinityflux /= 0.0 ) THEN
1672	message_string = 'boundary condition: bc_sa_t = "' // &
1673	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1674	'constant_top_salinityflux = .TRUE.'
1675	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1676	ENDIF
1677
1678	ENDIF
1679
1680	!
1681	!-- In case of humidity or passive scalar, set boundary conditions for total
1682	!-- water content / scalar
1683	IF ( humidity .OR. passive_scalar ) THEN
1684	IF ( humidity ) THEN
1685	sq = 'q'
1686	ELSE
1687	sq = 's'
1688	ENDIF
1689	IF ( bc_q_b == 'dirichlet' ) THEN
1690	ibc_q_b = 0
1691	ELSEIF ( bc_q_b == 'neumann' ) THEN
1692	ibc_q_b = 1
1693	ELSE
1694	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1695	'_b ="' // TRIM( bc_q_b ) // '"'
1696	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1697	ENDIF
1698	IF ( bc_q_t == 'dirichlet' ) THEN
1699	ibc_q_t = 0
1700	ELSEIF ( bc_q_t == 'neumann' ) THEN
1701	ibc_q_t = 1
1702	ELSE
1703	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1704	'_t ="' // TRIM( bc_q_t ) // '"'
1705	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1706	ENDIF
1707
1708	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1709
1710	!
1711	!-- A given surface humidity implies Dirichlet boundary condition for
1712	!-- humidity. In this case specification of a constant water flux is
1713	!-- forbidden.
1714	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1715	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1716	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1717	'th prescribed surface flux'
1718	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1719	ENDIF
1720	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1721	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1722	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1723	q_surface_initial_change
1724	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1725	ENDIF
1726
1727	ENDIF
1728	!
1729	!-- Boundary conditions for horizontal components of wind speed
1730	IF ( bc_uv_b == 'dirichlet' ) THEN
1731	ibc_uv_b = 0
1732	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1733	ibc_uv_b = 1
1734	IF ( prandtl_layer ) THEN
1735	message_string = 'boundary condition: bc_uv_b = "' // &
1736	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1737	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1738	ENDIF
1739	ELSE
1740	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1741	TRIM( bc_uv_b ) // '"'
1742	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1743	ENDIF
1744	!
1745	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1746	!-- assigned with the u and v values of the ocean surface
1747	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1748	ibc_uv_b = 2
1749	ENDIF
1750
1751	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1752	bc_uv_t = 'neumann'
1753	ibc_uv_t = 1
1754	ELSE
1755	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1756	ibc_uv_t = 0
1757	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1758	!
1759	!-- Velocities for the initial u,v-profiles are set zero at the top
1760	!-- in case of dirichlet_0 conditions
1761	u_init(nzt+1) = 0.0
1762	v_init(nzt+1) = 0.0
1763	ENDIF
1764	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1765	ibc_uv_t = 1
1766	ELSE
1767	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1768	TRIM( bc_uv_t ) // '"'
1769	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1770	ENDIF
1771	ENDIF
1772
1773	!
1774	!-- Compute and check, respectively, the Rayleigh Damping parameter
1775	IF ( rayleigh_damping_factor == -1.0 ) THEN
1776	rayleigh_damping_factor = 0.0
1777	ELSE
1778	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1779	THEN
1780	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1781	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1782	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1783	ENDIF
1784	ENDIF
1785
1786	IF ( rayleigh_damping_height == -1.0 ) THEN
1787	IF ( .NOT. ocean ) THEN
1788	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1789	ELSE
1790	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1791	ENDIF
1792	ELSE
1793	IF ( .NOT. ocean ) THEN
1794	IF ( rayleigh_damping_height < 0.0 .OR. &
1795	rayleigh_damping_height > zu(nzt) ) THEN
1796	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1797	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1798	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1799	ENDIF
1800	ELSE
1801	IF ( rayleigh_damping_height > 0.0 .OR. &
1802	rayleigh_damping_height < zu(nzb) ) THEN
1803	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1804	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1805	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1806	ENDIF
1807	ENDIF
1808	ENDIF
1809
1810	!
1811	!-- Check number of chosen statistic regions. More than 10 regions are not
1812	!-- allowed, because so far no more than 10 corresponding output files can
1813	!-- be opened (cf. check_open)
1814	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1815	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1816	statistic_regions+1, ' but only 10 regions are allowed'
1817	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1818	ENDIF
1819	IF ( normalizing_region > statistic_regions .OR. &
1820	normalizing_region < 0) THEN
1821	WRITE ( message_string, * ) 'normalizing_region = ', &
1822	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1823	' (value of statistic_regions)'
1824	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1825	ENDIF
1826
1827	!
1828	!-- Check the interval for sorting particles.
1829	!-- Using particles as cloud droplets requires sorting after each timestep.
1830	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1831	dt_sort_particles = 0.0
1832	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1833	'_droplets = .TRUE.'
1834	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1835	ENDIF
1836
1837	!
1838	!-- Set the default intervals for data output, if necessary
1839	!-- NOTE: dt_dosp has already been set in package_parin
1840	IF ( dt_data_output /= 9999999.9 ) THEN
1841	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1842	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1843	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1844	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1845	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1846	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1847	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1848	DO mid = 1, max_masks
1849	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1850	ENDDO
1851	ENDIF
1852
1853	!
1854	!-- Set the default skip time intervals for data output, if necessary
1855	IF ( skip_time_dopr == 9999999.9 ) &
1856	skip_time_dopr = skip_time_data_output
1857	IF ( skip_time_dosp == 9999999.9 ) &
1858	skip_time_dosp = skip_time_data_output
1859	IF ( skip_time_do2d_xy == 9999999.9 ) &
1860	skip_time_do2d_xy = skip_time_data_output
1861	IF ( skip_time_do2d_xz == 9999999.9 ) &
1862	skip_time_do2d_xz = skip_time_data_output
1863	IF ( skip_time_do2d_yz == 9999999.9 ) &
1864	skip_time_do2d_yz = skip_time_data_output
1865	IF ( skip_time_do3d == 9999999.9 ) &
1866	skip_time_do3d = skip_time_data_output
1867	IF ( skip_time_data_output_av == 9999999.9 ) &
1868	skip_time_data_output_av = skip_time_data_output
1869	DO mid = 1, max_masks
1870	IF ( skip_time_domask(mid) == 9999999.9 ) &
1871	skip_time_domask(mid) = skip_time_data_output
1872	ENDDO
1873
1874	!
1875	!-- Check the average intervals (first for 3d-data, then for profiles and
1876	!-- spectra)
1877	IF ( averaging_interval > dt_data_output_av ) THEN
1878	WRITE( message_string, * ) 'averaging_interval = ', &
1879	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1880	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1881	ENDIF
1882
1883	IF ( averaging_interval_pr == 9999999.9 ) THEN
1884	averaging_interval_pr = averaging_interval
1885	ENDIF
1886
1887	IF ( averaging_interval_pr > dt_dopr ) THEN
1888	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1889	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1890	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1891	ENDIF
1892
1893	IF ( averaging_interval_sp == 9999999.9 ) THEN
1894	averaging_interval_sp = averaging_interval
1895	ENDIF
1896
1897	IF ( averaging_interval_sp > dt_dosp ) THEN
1898	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1899	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1900	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1901	ENDIF
1902
1903	!
1904	!-- Set the default interval for profiles entering the temporal average
1905	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1906	dt_averaging_input_pr = dt_averaging_input
1907	ENDIF
1908
1909	!
1910	!-- Set the default interval for the output of timeseries to a reasonable
1911	!-- value (tries to minimize the number of calls of flow_statistics)
1912	IF ( dt_dots == 9999999.9 ) THEN
1913	IF ( averaging_interval_pr == 0.0 ) THEN
1914	dt_dots = MIN( dt_run_control, dt_dopr )
1915	ELSE
1916	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1917	ENDIF
1918	ENDIF
1919
1920	!
1921	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1922	IF ( dt_averaging_input > averaging_interval ) THEN
1923	WRITE( message_string, * ) 'dt_averaging_input = ', &
1924	dt_averaging_input, ' must be <= averaging_interval = ', &
1925	averaging_interval
1926	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1927	ENDIF
1928
1929	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1930	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1931	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1932	averaging_interval_pr
1933	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1934	ENDIF
1935
1936	!
1937	!-- Set the default value for the integration interval of precipitation amount
1938	IF ( precipitation ) THEN
1939	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1940	precipitation_amount_interval = dt_do2d_xy
1941	ELSE
1942	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1943	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1944	precipitation_amount_interval, ' must not be larger than ', &
1945	'dt_do2d_xy = ', dt_do2d_xy
1946	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1947	ENDIF
1948	ENDIF
1949	ENDIF
1950
1951	!
1952	!-- Determine the number of output profiles and check whether they are
1953	!-- permissible
1954	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1955
1956	dopr_n = dopr_n + 1
1957	i = dopr_n
1958
1959	!
1960	!-- Determine internal profile number (for hom, homs)
1961	!-- and store height levels
1962	SELECT CASE ( TRIM( data_output_pr(i) ) )
1963
1964	CASE ( 'u', '#u' )
1965	dopr_index(i) = 1
1966	dopr_unit(i) = 'm/s'
1967	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1968	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1969	dopr_initial_index(i) = 5
1970	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1971	data_output_pr(i) = data_output_pr(i)(2:)
1972	ENDIF
1973
1974	CASE ( 'v', '#v' )
1975	dopr_index(i) = 2
1976	dopr_unit(i) = 'm/s'
1977	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1978	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1979	dopr_initial_index(i) = 6
1980	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1981	data_output_pr(i) = data_output_pr(i)(2:)
1982	ENDIF
1983
1984	CASE ( 'w' )
1985	dopr_index(i) = 3
1986	dopr_unit(i) = 'm/s'
1987	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1988
1989	CASE ( 'pt', '#pt' )
1990	IF ( .NOT. cloud_physics ) THEN
1991	dopr_index(i) = 4
1992	dopr_unit(i) = 'K'
1993	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1994	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1995	dopr_initial_index(i) = 7
1996	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1997	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1998	data_output_pr(i) = data_output_pr(i)(2:)
1999	ENDIF
2000	ELSE
2001	dopr_index(i) = 43
2002	dopr_unit(i) = 'K'
2003	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2004	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2005	dopr_initial_index(i) = 28
2006	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2007	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
2008	data_output_pr(i) = data_output_pr(i)(2:)
2009	ENDIF
2010	ENDIF
2011
2012	CASE ( 'e' )
2013	dopr_index(i) = 8
2014	dopr_unit(i) = 'm2/s2'
2015	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2016	hom(nzb,2,8,:) = 0.0
2017
2018	CASE ( 'km', '#km' )
2019	dopr_index(i) = 9
2020	dopr_unit(i) = 'm2/s'
2021	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2022	hom(nzb,2,9,:) = 0.0
2023	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2024	dopr_initial_index(i) = 23
2025	hom(:,2,23,:) = hom(:,2,9,:)
2026	data_output_pr(i) = data_output_pr(i)(2:)
2027	ENDIF
2028
2029	CASE ( 'kh', '#kh' )
2030	dopr_index(i) = 10
2031	dopr_unit(i) = 'm2/s'
2032	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2033	hom(nzb,2,10,:) = 0.0
2034	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2035	dopr_initial_index(i) = 24
2036	hom(:,2,24,:) = hom(:,2,10,:)
2037	data_output_pr(i) = data_output_pr(i)(2:)
2038	ENDIF
2039
2040	CASE ( 'l', '#l' )
2041	dopr_index(i) = 11
2042	dopr_unit(i) = 'm'
2043	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2044	hom(nzb,2,11,:) = 0.0
2045	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2046	dopr_initial_index(i) = 25
2047	hom(:,2,25,:) = hom(:,2,11,:)
2048	data_output_pr(i) = data_output_pr(i)(2:)
2049	ENDIF
2050
2051	CASE ( 'w"u"' )
2052	dopr_index(i) = 12
2053	dopr_unit(i) = 'm2/s2'
2054	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2055	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2056
2057	CASE ( 'wu' )
2058	dopr_index(i) = 13
2059	dopr_unit(i) = 'm2/s2'
2060	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2061
2062	CASE ( 'w"v"' )
2063	dopr_index(i) = 14
2064	dopr_unit(i) = 'm2/s2'
2065	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2066	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2067
2068	CASE ( 'wv' )
2069	dopr_index(i) = 15
2070	dopr_unit(i) = 'm2/s2'
2071	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2072
2073	CASE ( 'w"pt"' )
2074	dopr_index(i) = 16
2075	dopr_unit(i) = 'K m/s'
2076	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2077
2078	CASE ( 'wpt' )
2079	dopr_index(i) = 17
2080	dopr_unit(i) = 'K m/s'
2081	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2082
2083	CASE ( 'wpt' )
2084	dopr_index(i) = 18
2085	dopr_unit(i) = 'K m/s'
2086	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2087
2088	CASE ( 'wu' )
2089	dopr_index(i) = 19
2090	dopr_unit(i) = 'm2/s2'
2091	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2092	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2093
2094	CASE ( 'wv' )
2095	dopr_index(i) = 20
2096	dopr_unit(i) = 'm2/s2'
2097	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2098	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2099
2100	CASE ( 'wptBC' )
2101	dopr_index(i) = 21
2102	dopr_unit(i) = 'K m/s'
2103	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2104
2105	CASE ( 'wptBC' )
2106	dopr_index(i) = 22
2107	dopr_unit(i) = 'K m/s'
2108	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2109
2110	CASE ( 'sa', '#sa' )
2111	IF ( .NOT. ocean ) THEN
2112	message_string = 'data_output_pr = ' // &
2113	TRIM( data_output_pr(i) ) // ' is not imp' // &
2114	'lemented for ocean = .FALSE.'
2115	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2116	ELSE
2117	dopr_index(i) = 23
2118	dopr_unit(i) = 'psu'
2119	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2120	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2121	dopr_initial_index(i) = 26
2122	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2123	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2124	data_output_pr(i) = data_output_pr(i)(2:)
2125	ENDIF
2126	ENDIF
2127
2128	CASE ( 'u*2' )
2129	dopr_index(i) = 30
2130	dopr_unit(i) = 'm2/s2'
2131	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2132
2133	CASE ( 'v*2' )
2134	dopr_index(i) = 31
2135	dopr_unit(i) = 'm2/s2'
2136	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2137
2138	CASE ( 'w*2' )
2139	dopr_index(i) = 32
2140	dopr_unit(i) = 'm2/s2'
2141	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2142
2143	CASE ( 'pt*2' )
2144	dopr_index(i) = 33
2145	dopr_unit(i) = 'K2'
2146	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2147
2148	CASE ( 'e*' )
2149	dopr_index(i) = 34
2150	dopr_unit(i) = 'm2/s2'
2151	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2152
2153	CASE ( 'w2pt' )
2154	dopr_index(i) = 35
2155	dopr_unit(i) = 'K m2/s2'
2156	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2157
2158	CASE ( 'wpt2' )
2159	dopr_index(i) = 36
2160	dopr_unit(i) = 'K2 m/s'
2161	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2162
2163	CASE ( 'we' )
2164	dopr_index(i) = 37
2165	dopr_unit(i) = 'm3/s3'
2166	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2167
2168	CASE ( 'w*3' )
2169	dopr_index(i) = 38
2170	dopr_unit(i) = 'm3/s3'
2171	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2172
2173	CASE ( 'Sw' )
2174	dopr_index(i) = 39
2175	dopr_unit(i) = 'none'
2176	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2177
2178	CASE ( 'p' )
2179	dopr_index(i) = 40
2180	dopr_unit(i) = 'Pa'
2181	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2182
2183	CASE ( 'q', '#q' )
2184	IF ( .NOT. humidity ) THEN
2185	message_string = 'data_output_pr = ' // &
2186	TRIM( data_output_pr(i) ) // ' is not imp' // &
2187	'lemented for humidity = .FALSE.'
2188	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2189	ELSE
2190	dopr_index(i) = 41
2191	dopr_unit(i) = 'kg/kg'
2192	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2193	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2194	dopr_initial_index(i) = 26
2195	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2196	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2197	data_output_pr(i) = data_output_pr(i)(2:)
2198	ENDIF
2199	ENDIF
2200
2201	CASE ( 's', '#s' )
2202	IF ( .NOT. passive_scalar ) THEN
2203	message_string = 'data_output_pr = ' // &
2204	TRIM( data_output_pr(i) ) // ' is not imp' // &
2205	'lemented for passive_scalar = .FALSE.'
2206	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2207	ELSE
2208	dopr_index(i) = 41
2209	dopr_unit(i) = 'kg/m3'
2210	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2211	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2212	dopr_initial_index(i) = 26
2213	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2214	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2215	data_output_pr(i) = data_output_pr(i)(2:)
2216	ENDIF
2217	ENDIF
2218
2219	CASE ( 'qv', '#qv' )
2220	IF ( .NOT. cloud_physics ) THEN
2221	dopr_index(i) = 41
2222	dopr_unit(i) = 'kg/kg'
2223	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2224	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2225	dopr_initial_index(i) = 26
2226	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2227	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2228	data_output_pr(i) = data_output_pr(i)(2:)
2229	ENDIF
2230	ELSE
2231	dopr_index(i) = 42
2232	dopr_unit(i) = 'kg/kg'
2233	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2234	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2235	dopr_initial_index(i) = 27
2236	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2237	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2238	data_output_pr(i) = data_output_pr(i)(2:)
2239	ENDIF
2240	ENDIF
2241
2242	CASE ( 'lpt', '#lpt' )
2243	IF ( .NOT. cloud_physics ) THEN
2244	message_string = 'data_output_pr = ' // &
2245	TRIM( data_output_pr(i) ) // ' is not imp' // &
2246	'lemented for cloud_physics = .FALSE.'
2247	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2248	ELSE
2249	dopr_index(i) = 4
2250	dopr_unit(i) = 'K'
2251	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2252	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2253	dopr_initial_index(i) = 7
2254	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2255	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2256	data_output_pr(i) = data_output_pr(i)(2:)
2257	ENDIF
2258	ENDIF
2259
2260	CASE ( 'vpt', '#vpt' )
2261	dopr_index(i) = 44
2262	dopr_unit(i) = 'K'
2263	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2264	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2265	dopr_initial_index(i) = 29
2266	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2267	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2268	data_output_pr(i) = data_output_pr(i)(2:)
2269	ENDIF
2270
2271	CASE ( 'w"vpt"' )
2272	dopr_index(i) = 45
2273	dopr_unit(i) = 'K m/s'
2274	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2275
2276	CASE ( 'wvpt' )
2277	dopr_index(i) = 46
2278	dopr_unit(i) = 'K m/s'
2279	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2280
2281	CASE ( 'wvpt' )
2282	dopr_index(i) = 47
2283	dopr_unit(i) = 'K m/s'
2284	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2285
2286	CASE ( 'w"q"' )
2287	IF ( .NOT. humidity ) THEN
2288	message_string = 'data_output_pr = ' // &
2289	TRIM( data_output_pr(i) ) // ' is not imp' // &
2290	'lemented for humidity = .FALSE.'
2291	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2292	ELSE
2293	dopr_index(i) = 48
2294	dopr_unit(i) = 'kg/kg m/s'
2295	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2296	ENDIF
2297
2298	CASE ( 'wq' )
2299	IF ( .NOT. humidity ) THEN
2300	message_string = 'data_output_pr = ' // &
2301	TRIM( data_output_pr(i) ) // ' is not imp' // &
2302	'lemented for humidity = .FALSE.'
2303	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2304	ELSE
2305	dopr_index(i) = 49
2306	dopr_unit(i) = 'kg/kg m/s'
2307	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2308	ENDIF
2309
2310	CASE ( 'wq' )
2311	IF ( .NOT. humidity ) THEN
2312	message_string = 'data_output_pr = ' // &
2313	TRIM( data_output_pr(i) ) // ' is not imp' // &
2314	'lemented for humidity = .FALSE.'
2315	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2316	ELSE
2317	dopr_index(i) = 50
2318	dopr_unit(i) = 'kg/kg m/s'
2319	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2320	ENDIF
2321
2322	CASE ( 'w"s"' )
2323	IF ( .NOT. passive_scalar ) THEN
2324	message_string = 'data_output_pr = ' // &
2325	TRIM( data_output_pr(i) ) // ' is not imp' // &
2326	'lemented for passive_scalar = .FALSE.'
2327	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2328	ELSE
2329	dopr_index(i) = 48
2330	dopr_unit(i) = 'kg/m3 m/s'
2331	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2332	ENDIF
2333
2334	CASE ( 'ws' )
2335	IF ( .NOT. passive_scalar ) THEN
2336	message_string = 'data_output_pr = ' // &
2337	TRIM( data_output_pr(i) ) // ' is not imp' // &
2338	'lemented for passive_scalar = .FALSE.'
2339	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2340	ELSE
2341	dopr_index(i) = 49
2342	dopr_unit(i) = 'kg/m3 m/s'
2343	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2344	ENDIF
2345
2346	CASE ( 'ws' )
2347	IF ( .NOT. passive_scalar ) THEN
2348	message_string = 'data_output_pr = ' // &
2349	TRIM( data_output_pr(i) ) // ' is not imp' // &
2350	'lemented for passive_scalar = .FALSE.'
2351	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2352	ELSE
2353	dopr_index(i) = 50
2354	dopr_unit(i) = 'kg/m3 m/s'
2355	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2356	ENDIF
2357
2358	CASE ( 'w"qv"' )
2359	IF ( humidity .AND. .NOT. cloud_physics ) &
2360	THEN
2361	dopr_index(i) = 48
2362	dopr_unit(i) = 'kg/kg m/s'
2363	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2364	ELSEIF( humidity .AND. cloud_physics ) THEN
2365	dopr_index(i) = 51
2366	dopr_unit(i) = 'kg/kg m/s'
2367	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2368	ELSE
2369	message_string = 'data_output_pr = ' // &
2370	TRIM( data_output_pr(i) ) // ' is not imp' // &
2371	'lemented for cloud_physics = .FALSE. an&' // &
2372	'd humidity = .FALSE.'
2373	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2374	ENDIF
2375
2376	CASE ( 'wqv' )
2377	IF ( humidity .AND. .NOT. cloud_physics ) &
2378	THEN
2379	dopr_index(i) = 49
2380	dopr_unit(i) = 'kg/kg m/s'
2381	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2382	ELSEIF( humidity .AND. cloud_physics ) THEN
2383	dopr_index(i) = 52
2384	dopr_unit(i) = 'kg/kg m/s'
2385	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2386	ELSE
2387	message_string = 'data_output_pr = ' // &
2388	TRIM( data_output_pr(i) ) // ' is not imp' // &
2389	'lemented for cloud_physics = .FALSE. an&' // &
2390	'd humidity = .FALSE.'
2391	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2392	ENDIF
2393
2394	CASE ( 'wqv' )
2395	IF ( humidity .AND. .NOT. cloud_physics ) &
2396	THEN
2397	dopr_index(i) = 50
2398	dopr_unit(i) = 'kg/kg m/s'
2399	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2400	ELSEIF( humidity .AND. cloud_physics ) THEN
2401	dopr_index(i) = 53
2402	dopr_unit(i) = 'kg/kg m/s'
2403	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2404	ELSE
2405	message_string = 'data_output_pr = ' // &
2406	TRIM( data_output_pr(i) ) // ' is not imp' // &
2407	'lemented for cloud_physics = .FALSE. an&' // &
2408	'd humidity = .FALSE.'
2409	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2410	ENDIF
2411
2412	CASE ( 'ql' )
2413	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2414	message_string = 'data_output_pr = ' // &
2415	TRIM( data_output_pr(i) ) // ' is not imp' // &
2416	'lemented for cloud_physics = .FALSE. or' // &
2417	'&cloud_droplets = .FALSE.'
2418	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2419	ELSE
2420	dopr_index(i) = 54
2421	dopr_unit(i) = 'kg/kg'
2422	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2423	ENDIF
2424
2425	CASE ( 'wuu*:dz' )
2426	dopr_index(i) = 55
2427	dopr_unit(i) = 'm2/s3'
2428	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2429
2430	CASE ( 'wp:dz' )
2431	dopr_index(i) = 56
2432	dopr_unit(i) = 'm2/s3'
2433	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2434
2435	CASE ( 'w"e:dz' )
2436	dopr_index(i) = 57
2437	dopr_unit(i) = 'm2/s3'
2438	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2439
2440
2441	CASE ( 'u"pt"' )
2442	dopr_index(i) = 58
2443	dopr_unit(i) = 'K m/s'
2444	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2445
2446	CASE ( 'upt' )
2447	dopr_index(i) = 59
2448	dopr_unit(i) = 'K m/s'
2449	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2450
2451	CASE ( 'upt_t' )
2452	dopr_index(i) = 60
2453	dopr_unit(i) = 'K m/s'
2454	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2455
2456	CASE ( 'v"pt"' )
2457	dopr_index(i) = 61
2458	dopr_unit(i) = 'K m/s'
2459	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2460
2461	CASE ( 'vpt' )
2462	dopr_index(i) = 62
2463	dopr_unit(i) = 'K m/s'
2464	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2465
2466	CASE ( 'vpt_t' )
2467	dopr_index(i) = 63
2468	dopr_unit(i) = 'K m/s'
2469	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2470
2471	CASE ( 'rho' )
2472	IF ( .NOT. ocean ) THEN
2473	message_string = 'data_output_pr = ' // &
2474	TRIM( data_output_pr(i) ) // ' is not imp' // &
2475	'lemented for ocean = .FALSE.'
2476	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2477	ELSE
2478	dopr_index(i) = 64
2479	dopr_unit(i) = 'kg/m3'
2480	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2481	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2482	dopr_initial_index(i) = 77
2483	hom(:,2,77,:) = SPREAD( zu, 2, statistic_regions+1 )
2484	hom(nzb,2,77,:) = 0.0 ! because zu(nzb) is negative
2485	data_output_pr(i) = data_output_pr(i)(2:)
2486	ENDIF
2487	ENDIF
2488
2489	CASE ( 'w"sa"' )
2490	IF ( .NOT. ocean ) THEN
2491	message_string = 'data_output_pr = ' // &
2492	TRIM( data_output_pr(i) ) // ' is not imp' // &
2493	'lemented for ocean = .FALSE.'
2494	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2495	ELSE
2496	dopr_index(i) = 65
2497	dopr_unit(i) = 'psu m/s'
2498	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2499	ENDIF
2500
2501	CASE ( 'wsa' )
2502	IF ( .NOT. ocean ) THEN
2503	message_string = 'data_output_pr = ' // &
2504	TRIM( data_output_pr(i) ) // ' is not imp' // &
2505	'lemented for ocean = .FALSE.'
2506	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2507	ELSE
2508	dopr_index(i) = 66
2509	dopr_unit(i) = 'psu m/s'
2510	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2511	ENDIF
2512
2513	CASE ( 'wsa' )
2514	IF ( .NOT. ocean ) THEN
2515	message_string = 'data_output_pr = ' // &
2516	TRIM( data_output_pr(i) ) // ' is not imp' // &
2517	'lemented for ocean = .FALSE.'
2518	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2519	ELSE
2520	dopr_index(i) = 67
2521	dopr_unit(i) = 'psu m/s'
2522	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2523	ENDIF
2524
2525	CASE ( 'wp' )
2526	dopr_index(i) = 68
2527	dopr_unit(i) = 'm3/s3'
2528	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2529
2530	CASE ( 'w"e' )
2531	dopr_index(i) = 69
2532	dopr_unit(i) = 'm3/s3'
2533	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2534
2535	CASE ( 'q*2' )
2536	IF ( .NOT. humidity ) THEN
2537	message_string = 'data_output_pr = ' // &
2538	TRIM( data_output_pr(i) ) // ' is not imp' // &
2539	'lemented for humidity = .FALSE.'
2540	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2541	ELSE
2542	dopr_index(i) = 70
2543	dopr_unit(i) = 'kg2/kg2'
2544	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2545	ENDIF
2546
2547	CASE ( 'prho' )
2548	IF ( .NOT. ocean ) THEN
2549	message_string = 'data_output_pr = ' // &
2550	TRIM( data_output_pr(i) ) // ' is not imp' // &
2551	'lemented for ocean = .FALSE.'
2552	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2553	ELSE
2554	dopr_index(i) = 71
2555	dopr_unit(i) = 'kg/m3'
2556	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2557	ENDIF
2558
2559	CASE ( 'hyp' )
2560	dopr_index(i) = 72
2561	dopr_unit(i) = 'dbar'
2562	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2563
2564	CASE ( 'nr' )
2565	IF ( .NOT. cloud_physics ) THEN
2566	message_string = 'data_output_pr = ' // &
2567	TRIM( data_output_pr(i) ) // ' is not imp' // &
2568	'lemented for cloud_physics = .FALSE.'
2569	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2570	ELSEIF ( icloud_scheme /= 0 ) THEN
2571	message_string = 'data_output_pr = ' // &
2572	TRIM( data_output_pr(i) ) // ' is not imp' // &
2573	'lemented for cloud_scheme /= seifert_beheng'
2574	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2575	ELSEIF ( .NOT. precipitation ) THEN
2576	message_string = 'data_output_pr = ' // &
2577	TRIM( data_output_pr(i) ) // ' is not imp' // &
2578	'lemented for precipitation = .FALSE.'
2579	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2580	ELSE
2581	dopr_index(i) = 73
2582	dopr_unit(i) = '1/m3'
2583	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2584	ENDIF
2585
2586	CASE ( 'qr' )
2587	IF ( .NOT. cloud_physics ) THEN
2588	message_string = 'data_output_pr = ' // &
2589	TRIM( data_output_pr(i) ) // ' is not imp' // &
2590	'lemented for cloud_physics = .FALSE.'
2591	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2592	ELSEIF ( icloud_scheme /= 0 ) THEN
2593	message_string = 'data_output_pr = ' // &
2594	TRIM( data_output_pr(i) ) // ' is not imp' // &
2595	'lemented for cloud_scheme /= seifert_beheng'
2596	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2597	ELSEIF ( .NOT. precipitation ) THEN
2598	message_string = 'data_output_pr = ' // &
2599	TRIM( data_output_pr(i) ) // ' is not imp' // &
2600	'lemented for precipitation = .FALSE.'
2601	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2602	ELSE
2603	dopr_index(i) = 74
2604	dopr_unit(i) = 'kg/kg'
2605	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2606	ENDIF
2607
2608	CASE ( 'qc' )
2609	IF ( .NOT. cloud_physics ) THEN
2610	message_string = 'data_output_pr = ' // &
2611	TRIM( data_output_pr(i) ) // ' is not imp' // &
2612	'lemented for cloud_physics = .FALSE.'
2613	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2614	ELSEIF ( icloud_scheme /= 0 ) THEN
2615	message_string = 'data_output_pr = ' // &
2616	TRIM( data_output_pr(i) ) // ' is not imp' // &
2617	'lemented for cloud_scheme /= seifert_beheng'
2618	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2619	ELSE
2620	dopr_index(i) = 75
2621	dopr_unit(i) = 'kg/kg'
2622	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2623	ENDIF
2624
2625	CASE ( 'prr' )
2626	IF ( .NOT. cloud_physics ) THEN
2627	message_string = 'data_output_pr = ' // &
2628	TRIM( data_output_pr(i) ) // ' is not imp' // &
2629	'lemented for cloud_physics = .FALSE.'
2630	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2631	ELSEIF ( icloud_scheme /= 0 ) THEN
2632	message_string = 'data_output_pr = ' // &
2633	TRIM( data_output_pr(i) ) // ' is not imp' // &
2634	'lemented for cloud_scheme /= seifert_beheng'
2635	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2636	ELSEIF ( .NOT. precipitation ) THEN
2637	message_string = 'data_output_pr = ' // &
2638	TRIM( data_output_pr(i) ) // ' is not imp' // &
2639	'lemented for precipitation = .FALSE.'
2640	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2641
2642	ELSE
2643	dopr_index(i) = 76
2644	dopr_unit(i) = 'kg/kg m/s'
2645	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2646	ENDIF
2647
2648	CASE DEFAULT
2649
2650	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2651
2652	IF ( unit == 'illegal' ) THEN
2653	IF ( data_output_pr_user(1) /= ' ' ) THEN
2654	message_string = 'illegal value for data_output_pr or ' // &
2655	'data_output_pr_user = "' // &
2656	TRIM( data_output_pr(i) ) // '"'
2657	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2658	ELSE
2659	message_string = 'illegal value for data_output_pr = "' // &
2660	TRIM( data_output_pr(i) ) // '"'
2661	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2662	ENDIF
2663	ENDIF
2664
2665	END SELECT
2666
2667	ENDDO
2668
2669
2670	!
2671	!-- Append user-defined data output variables to the standard data output
2672	IF ( data_output_user(1) /= ' ' ) THEN
2673	i = 1
2674	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2675	i = i + 1
2676	ENDDO
2677	j = 1
2678	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2679	IF ( i > 100 ) THEN
2680	message_string = 'number of output quantitities given by data' // &
2681	'_output and data_output_user exceeds the limit of 100'
2682	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2683	ENDIF
2684	data_output(i) = data_output_user(j)
2685	i = i + 1
2686	j = j + 1
2687	ENDDO
2688	ENDIF
2689
2690	!
2691	!-- Check and set steering parameters for 2d/3d data output and averaging
2692	i = 1
2693	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2694	!
2695	!-- Check for data averaging
2696	ilen = LEN_TRIM( data_output(i) )
2697	j = 0 ! no data averaging
2698	IF ( ilen > 3 ) THEN
2699	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2700	j = 1 ! data averaging
2701	data_output(i) = data_output(i)(1:ilen-3)
2702	ENDIF
2703	ENDIF
2704	!
2705	!-- Check for cross section or volume data
2706	ilen = LEN_TRIM( data_output(i) )
2707	k = 0 ! 3d data
2708	var = data_output(i)(1:ilen)
2709	IF ( ilen > 3 ) THEN
2710	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2711	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2712	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2713	k = 1 ! 2d data
2714	var = data_output(i)(1:ilen-3)
2715	ENDIF
2716	ENDIF
2717	!
2718	!-- Check for allowed value and set units
2719	SELECT CASE ( TRIM( var ) )
2720
2721	CASE ( 'e' )
2722	IF ( constant_diffusion ) THEN
2723	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2724	'res constant_diffusion = .FALSE.'
2725	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2726	ENDIF
2727	unit = 'm2/s2'
2728
2729	CASE ( 'lpt' )
2730	IF ( .NOT. cloud_physics ) THEN
2731	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2732	'res cloud_physics = .TRUE.'
2733	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2734	ENDIF
2735	unit = 'K'
2736
2737	CASE ( 'nr' )
2738	IF ( .NOT. cloud_physics ) THEN
2739	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2740	'res cloud_physics = .TRUE.'
2741	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2742	ELSEIF ( icloud_scheme /= 0 ) THEN
2743	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2744	'res cloud_scheme = seifert_beheng'
2745	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2746	ENDIF
2747	unit = '1/m3'
2748
2749	CASE ( 'pc', 'pr' )
2750	IF ( .NOT. particle_advection ) THEN
2751	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2752	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2753	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2754	ENDIF
2755	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2756	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2757
2758	CASE ( 'prr' )
2759	IF ( .NOT. cloud_physics ) THEN
2760	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2761	'res cloud_physics = .TRUE.'
2762	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2763	ELSEIF ( icloud_scheme /= 0 ) THEN
2764	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2765	'res cloud_scheme = seifert_beheng'
2766	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2767	ELSEIF ( .NOT. precipitation ) THEN
2768	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2769	'res precipitation = .TRUE.'
2770	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2771	ENDIF
2772	unit = 'kg/kg m/s'
2773
2774	CASE ( 'q', 'vpt' )
2775	IF ( .NOT. humidity ) THEN
2776	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2777	'res humidity = .TRUE.'
2778	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2779	ENDIF
2780	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2781	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2782
2783	CASE ( 'qc' )
2784	IF ( .NOT. cloud_physics ) THEN
2785	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2786	'res cloud_physics = .TRUE.'
2787	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2788	ELSEIF ( icloud_scheme /= 0 ) THEN
2789	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2790	'res cloud_scheme = seifert_beheng'
2791	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2792	ENDIF
2793	unit = 'kg/kg'
2794
2795	CASE ( 'ql' )
2796	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2797	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2798	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2799	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2800	ENDIF
2801	unit = 'kg/kg'
2802
2803	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2804	IF ( .NOT. cloud_droplets ) THEN
2805	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2806	'res cloud_droplets = .TRUE.'
2807	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2808	ENDIF
2809	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2810	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2811	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2812
2813	CASE ( 'qr' )
2814	IF ( .NOT. cloud_physics ) THEN
2815	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2816	'res cloud_physics = .TRUE.'
2817	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2818	ELSEIF ( icloud_scheme /= 0 ) THEN
2819	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2820	'res cloud_scheme = seifert_beheng'
2821	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2822	ELSEIF ( .NOT. precipitation ) THEN
2823	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2824	'res precipitation = .TRUE.'
2825	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2826	ENDIF
2827	unit = 'kg/kg'
2828
2829	CASE ( 'qv' )
2830	IF ( .NOT. cloud_physics ) THEN
2831	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2832	'res cloud_physics = .TRUE.'
2833	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2834	ENDIF
2835	unit = 'kg/kg'
2836
2837	CASE ( 'rho' )
2838	IF ( .NOT. ocean ) THEN
2839	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2840	'res ocean = .TRUE.'
2841	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2842	ENDIF
2843	unit = 'kg/m3'
2844
2845	CASE ( 's' )
2846	IF ( .NOT. passive_scalar ) THEN
2847	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2848	'res passive_scalar = .TRUE.'
2849	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2850	ENDIF
2851	unit = 'conc'
2852
2853	CASE ( 'sa' )
2854	IF ( .NOT. ocean ) THEN
2855	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2856	'res ocean = .TRUE.'
2857	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2858	ENDIF
2859	unit = 'psu'
2860
2861	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2862	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2863	message_string = 'illegal value for data_output: "' // &
2864	TRIM( var ) // '" & only 2d-horizontal ' // &
2865	'cross sections are allowed for this value'
2866	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2867	ENDIF
2868	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2869	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2870	'res cloud_physics = .TRUE.'
2871	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2872	ENDIF
2873	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2874	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2875	'res precipitation = .TRUE.'
2876	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2877	ENDIF
2878	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2879	message_string = 'temporal averaging of precipitation ' // &
2880	'amount "' // TRIM( var ) // '" is not possible'
2881	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2882	ENDIF
2883	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2884	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2885	'res precipitation = .TRUE.'
2886	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2887	ENDIF
2888	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2889	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2890	'res humidity = .TRUE.'
2891	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2892	ENDIF
2893
2894	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2895	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2896	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2897	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2898	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2899	IF ( TRIM( var ) == 't*' ) unit = 'K'
2900	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2901	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2902	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2903
2904
2905	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2906	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2907	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2908	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2909	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2910	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2911	CONTINUE
2912
2913	CASE DEFAULT
2914	CALL user_check_data_output( var, unit )
2915
2916	IF ( unit == 'illegal' ) THEN
2917	IF ( data_output_user(1) /= ' ' ) THEN
2918	message_string = 'illegal value for data_output or ' // &
2919	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2920	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2921	ELSE
2922	message_string = 'illegal value for data_output =' // &
2923	TRIM( data_output(i) ) // '"'
2924	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2925	ENDIF
2926	ENDIF
2927
2928	END SELECT
2929	!
2930	!-- Set the internal steering parameters appropriately
2931	IF ( k == 0 ) THEN
2932	do3d_no(j) = do3d_no(j) + 1
2933	do3d(j,do3d_no(j)) = data_output(i)
2934	do3d_unit(j,do3d_no(j)) = unit
2935	ELSE
2936	do2d_no(j) = do2d_no(j) + 1
2937	do2d(j,do2d_no(j)) = data_output(i)
2938	do2d_unit(j,do2d_no(j)) = unit
2939	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2940	data_output_xy(j) = .TRUE.
2941	ENDIF
2942	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2943	data_output_xz(j) = .TRUE.
2944	ENDIF
2945	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2946	data_output_yz(j) = .TRUE.
2947	ENDIF
2948	ENDIF
2949
2950	IF ( j == 1 ) THEN
2951	!
2952	!-- Check, if variable is already subject to averaging
2953	found = .FALSE.
2954	DO k = 1, doav_n
2955	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2956	ENDDO
2957
2958	IF ( .NOT. found ) THEN
2959	doav_n = doav_n + 1
2960	doav(doav_n) = var
2961	ENDIF
2962	ENDIF
2963
2964	i = i + 1
2965	ENDDO
2966
2967	!
2968	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2969	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2970	WRITE( message_string, * ) 'output of averaged quantity "', &
2971	TRIM( doav(1) ), '_av" requires to set a ', &
2972	'non-zero & averaging interval'
2973	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2974	ENDIF
2975
2976	!
2977	!-- Check sectional planes and store them in one shared array
2978	IF ( ANY( section_xy > nz + 1 ) ) THEN
2979	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2980	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2981	ENDIF
2982	IF ( ANY( section_xz > ny + 1 ) ) THEN
2983	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2984	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2985	ENDIF
2986	IF ( ANY( section_yz > nx + 1 ) ) THEN
2987	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2988	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2989	ENDIF
2990	section(:,1) = section_xy
2991	section(:,2) = section_xz
2992	section(:,3) = section_yz
2993
2994	!
2995	!-- Upper plot limit for 2D vertical sections
2996	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2997	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2998	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2999	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3000	' (zu(nzt))'
3001	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3002	ENDIF
3003
3004	!
3005	!-- Upper plot limit for 3D arrays
3006	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3007
3008	!
3009	!-- Determine and check accuracy for compressed 3D plot output
3010	IF ( do3d_compress ) THEN
3011	!
3012	!-- Compression only permissible on T3E machines
3013	IF ( host(1:3) /= 't3e' ) THEN
3014	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3015	TRIM( host ) // '"'
3016	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3017	ENDIF
3018
3019	i = 1
3020	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3021
3022	ilen = LEN_TRIM( do3d_comp_prec(i) )
3023	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3024	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3025	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3026	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3027	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3028	ENDIF
3029
3030	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3031	var = do3d_comp_prec(i)(1:ilen-1)
3032
3033	SELECT CASE ( var )
3034
3035	CASE ( 'u' )
3036	j = 1
3037	CASE ( 'v' )
3038	j = 2
3039	CASE ( 'w' )
3040	j = 3
3041	CASE ( 'p' )
3042	j = 4
3043	CASE ( 'pt' )
3044	j = 5
3045
3046	CASE DEFAULT
3047	WRITE( message_string, * ) 'unknown variable "', &
3048	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3049	i, ')'
3050	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3051
3052	END SELECT
3053
3054	plot_3d_precision(j)%precision = prec
3055	i = i + 1
3056
3057	ENDDO
3058	ENDIF
3059
3060	!
3061	!-- Check the data output format(s)
3062	IF ( data_output_format(1) == ' ' ) THEN
3063	!
3064	!-- Default value
3065	netcdf_output = .TRUE.
3066	ELSE
3067	i = 1
3068	DO WHILE ( data_output_format(i) /= ' ' )
3069
3070	SELECT CASE ( data_output_format(i) )
3071
3072	CASE ( 'netcdf' )
3073	netcdf_output = .TRUE.
3074	CASE ( 'iso2d' )
3075	iso2d_output = .TRUE.
3076	CASE ( 'avs' )
3077	avs_output = .TRUE.
3078
3079	CASE DEFAULT
3080	message_string = 'unknown value for data_output_format "' // &
3081	TRIM( data_output_format(i) ) // '"'
3082	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3083
3084	END SELECT
3085
3086	i = i + 1
3087	IF ( i > 10 ) EXIT
3088
3089	ENDDO
3090	ENDIF
3091
3092	!
3093	!-- Set output format string (used in header)
3094	IF ( netcdf_output ) THEN
3095
3096	SELECT CASE ( netcdf_data_format )
3097	CASE ( 1 )
3098	output_format_netcdf = 'netCDF classic'
3099	CASE ( 2 )
3100	output_format_netcdf = 'netCDF 64bit offset'
3101	CASE ( 3 )
3102	output_format_netcdf = 'netCDF4/HDF5'
3103	CASE ( 4 )
3104	output_format_netcdf = 'netCDF4/HDF5 classic'
3105	CASE ( 5 )
3106	output_format_netcdf = 'parallel netCDF4/HDF5'
3107	CASE ( 6 )
3108	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3109
3110	END SELECT
3111
3112	ENDIF
3113
3114	!
3115	!-- Check mask conditions
3116	DO mid = 1, max_masks
3117	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3118	data_output_masks_user(mid,1) /= ' ' ) THEN
3119	masks = masks + 1
3120	ENDIF
3121	ENDDO
3122
3123	IF ( masks < 0 .OR. masks > max_masks ) THEN
3124	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3125	'<= ', max_masks, ' (=max_masks)'
3126	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3127	ENDIF
3128	IF ( masks > 0 ) THEN
3129	mask_scale(1) = mask_scale_x
3130	mask_scale(2) = mask_scale_y
3131	mask_scale(3) = mask_scale_z
3132	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3133	WRITE( message_string, * ) &
3134	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3135	'must be > 0.0'
3136	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3137	ENDIF
3138	!
3139	!-- Generate masks for masked data output
3140	CALL init_masks
3141	ENDIF
3142
3143	!
3144	!-- Check the NetCDF data format
3145	#if ! defined ( __check )
3146	IF ( netcdf_data_format > 2 ) THEN
3147	#if defined( __netcdf4 )
3148	CONTINUE
3149	#else
3150	message_string = 'netCDF: netCDF4 format requested but no ' // &
3151	'cpp-directive __netcdf4 given & switch ' // &
3152	'back to 64-bit offset format'
3153	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3154	netcdf_data_format = 2
3155	#endif
3156	ENDIF
3157	IF ( netcdf_data_format > 4 ) THEN
3158	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3159	CONTINUE
3160	#else
3161	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3162	'cpp-directive __netcdf4_parallel given & switch ' // &
3163	'back to netCDF4 non-parallel output'
3164	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3165	netcdf_data_format = netcdf_data_format - 2
3166	#endif
3167	ENDIF
3168	#endif
3169
3170	#if ! defined( __check )
3171	!
3172	!-- Check netcdf precison
3173	ldum = .FALSE.
3174	CALL define_netcdf_header( 'ch', ldum, 0 )
3175	#endif
3176	!
3177	!-- Check, whether a constant diffusion coefficient shall be used
3178	IF ( km_constant /= -1.0 ) THEN
3179	IF ( km_constant < 0.0 ) THEN
3180	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3181	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3182	ELSE
3183	IF ( prandtl_number < 0.0 ) THEN
3184	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3185	' < 0.0'
3186	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3187	ENDIF
3188	constant_diffusion = .TRUE.
3189
3190	IF ( prandtl_layer ) THEN
3191	message_string = 'prandtl_layer is not allowed with fixed ' // &
3192	'value of km'
3193	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3194	ENDIF
3195	ENDIF
3196	ENDIF
3197
3198	!
3199	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3200	!-- potential temperature, check the width of the damping layer
3201	IF ( bc_lr /= 'cyclic' ) THEN
3202	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3203	message_string = 'pt_damping_width out of range'
3204	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3205	ENDIF
3206	ENDIF
3207
3208	IF ( bc_ns /= 'cyclic' ) THEN
3209	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3210	message_string = 'pt_damping_width out of range'
3211	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3212	ENDIF
3213	ENDIF
3214
3215	!
3216	!-- Check value range for rif
3217	IF ( rif_min >= rif_max ) THEN
3218	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3219	'than rif_max = ', rif_max
3220	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3221	ENDIF
3222
3223	!
3224	!-- Determine upper and lower hight level indices for random perturbations
3225	IF ( disturbance_level_b == -9999999.9 ) THEN
3226	IF ( ocean ) THEN
3227	disturbance_level_b = zu((nzt*2)/3)
3228	disturbance_level_ind_b = ( nzt * 2 ) / 3
3229	ELSE
3230	disturbance_level_b = zu(nzb+3)
3231	disturbance_level_ind_b = nzb + 3
3232	ENDIF
3233	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3234	WRITE( message_string, * ) 'disturbance_level_b = ', &
3235	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3236	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3237	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3238	WRITE( message_string, * ) 'disturbance_level_b = ', &
3239	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3240	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3241	ELSE
3242	DO k = 3, nzt-2
3243	IF ( disturbance_level_b <= zu(k) ) THEN
3244	disturbance_level_ind_b = k
3245	EXIT
3246	ENDIF
3247	ENDDO
3248	ENDIF
3249
3250	IF ( disturbance_level_t == -9999999.9 ) THEN
3251	IF ( ocean ) THEN
3252	disturbance_level_t = zu(nzt-3)
3253	disturbance_level_ind_t = nzt - 3
3254	ELSE
3255	disturbance_level_t = zu(nzt/3)
3256	disturbance_level_ind_t = nzt / 3
3257	ENDIF
3258	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3259	WRITE( message_string, * ) 'disturbance_level_t = ', &
3260	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3261	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3262	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3263	WRITE( message_string, * ) 'disturbance_level_t = ', &
3264	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3265	disturbance_level_b
3266	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3267	ELSE
3268	DO k = 3, nzt-2
3269	IF ( disturbance_level_t <= zu(k) ) THEN
3270	disturbance_level_ind_t = k
3271	EXIT
3272	ENDIF
3273	ENDDO
3274	ENDIF
3275
3276	!
3277	!-- Check again whether the levels determined this way are ok.
3278	!-- Error may occur at automatic determination and too few grid points in
3279	!-- z-direction.
3280	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3281	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3282	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3283	disturbance_level_b
3284	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3285	ENDIF
3286
3287	!
3288	!-- Determine the horizontal index range for random perturbations.
3289	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3290	!-- near the inflow and the perturbation area is further limited to ...(1)
3291	!-- after the initial phase of the flow.
3292	dist_nxl = 0; dist_nxr = nx
3293	dist_nys = 0; dist_nyn = ny
3294	IF ( bc_lr /= 'cyclic' ) THEN
3295	IF ( inflow_disturbance_begin == -1 ) THEN
3296	inflow_disturbance_begin = MIN( 10, nx/2 )
3297	ENDIF
3298	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3299	THEN
3300	message_string = 'inflow_disturbance_begin out of range'
3301	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3302	ENDIF
3303	IF ( inflow_disturbance_end == -1 ) THEN
3304	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3305	ENDIF
3306	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3307	THEN
3308	message_string = 'inflow_disturbance_end out of range'
3309	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3310	ENDIF
3311	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3312	IF ( inflow_disturbance_begin == -1 ) THEN
3313	inflow_disturbance_begin = MIN( 10, ny/2 )
3314	ENDIF
3315	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3316	THEN
3317	message_string = 'inflow_disturbance_begin out of range'
3318	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3319	ENDIF
3320	IF ( inflow_disturbance_end == -1 ) THEN
3321	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3322	ENDIF
3323	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3324	THEN
3325	message_string = 'inflow_disturbance_end out of range'
3326	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3327	ENDIF
3328	ENDIF
3329
3330	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3331	dist_nxr = nx - inflow_disturbance_begin
3332	dist_nxl(1) = nx - inflow_disturbance_end
3333	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3334	dist_nxl = inflow_disturbance_begin
3335	dist_nxr(1) = inflow_disturbance_end
3336	ENDIF
3337	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3338	dist_nyn = ny - inflow_disturbance_begin
3339	dist_nys(1) = ny - inflow_disturbance_end
3340	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3341	dist_nys = inflow_disturbance_begin
3342	dist_nyn(1) = inflow_disturbance_end
3343	ENDIF
3344
3345	!
3346	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3347	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3348	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3349	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3350	'condition at the inflow boundary'
3351	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3352	ENDIF
3353
3354	!
3355	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3356	!-- data from prerun in the first main run
3357	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3358	initializing_actions /= 'read_restart_data' ) THEN
3359	message_string = 'turbulent_inflow = .T. requires ' // &
3360	'initializing_actions = ''cyclic_fill'' '
3361	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3362	ENDIF
3363
3364	!
3365	!-- In case of turbulent inflow calculate the index of the recycling plane
3366	IF ( turbulent_inflow ) THEN
3367	IF ( recycling_width == 9999999.9 ) THEN
3368	!
3369	!-- Set the default value for the width of the recycling domain
3370	recycling_width = 0.1 * nx * dx
3371	ELSE
3372	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3373	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3374	' ', recycling_width
3375	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3376	ENDIF
3377	ENDIF
3378	!
3379	!-- Calculate the index
3380	recycling_plane = recycling_width / dx
3381	ENDIF
3382
3383	!
3384	!-- Check random generator
3385	IF ( random_generator /= 'system-specific' .AND. &
3386	random_generator /= 'numerical-recipes' ) THEN
3387	message_string = 'unknown random generator: random_generator = "' // &
3388	TRIM( random_generator ) // '"'
3389	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3390	ENDIF
3391
3392	!
3393	!-- Determine damping level index for 1D model
3394	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3395	IF ( damp_level_1d == -1.0 ) THEN
3396	damp_level_1d = zu(nzt+1)
3397	damp_level_ind_1d = nzt + 1
3398	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3399	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3400	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3401	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3402	ELSE
3403	DO k = 1, nzt+1
3404	IF ( damp_level_1d <= zu(k) ) THEN
3405	damp_level_ind_1d = k
3406	EXIT
3407	ENDIF
3408	ENDDO
3409	ENDIF
3410	ENDIF
3411
3412	!
3413	!-- Check some other 1d-model parameters
3414	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3415	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3416	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3417	'" is unknown'
3418	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3419	ENDIF
3420	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3421	TRIM( dissipation_1d ) /= 'detering' ) THEN
3422	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3423	'" is unknown'
3424	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3425	ENDIF
3426
3427	!
3428	!-- Set time for the next user defined restart (time_restart is the
3429	!-- internal parameter for steering restart events)
3430	IF ( restart_time /= 9999999.9 ) THEN
3431	IF ( restart_time > time_since_reference_point ) THEN
3432	time_restart = restart_time
3433	ENDIF
3434	ELSE
3435	!
3436	!-- In case of a restart run, set internal parameter to default (no restart)
3437	!-- if the NAMELIST-parameter restart_time is omitted
3438	time_restart = 9999999.9
3439	ENDIF
3440
3441	!
3442	!-- Set default value of the time needed to terminate a model run
3443	IF ( termination_time_needed == -1.0 ) THEN
3444	IF ( host(1:3) == 'ibm' ) THEN
3445	termination_time_needed = 300.0
3446	ELSE
3447	termination_time_needed = 35.0
3448	ENDIF
3449	ENDIF
3450
3451	!
3452	!-- Check the time needed to terminate a model run
3453	IF ( host(1:3) == 't3e' ) THEN
3454	!
3455	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3456	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3457	IF ( termination_time_needed <= 30.0 ) THEN
3458	WRITE( message_string, * ) 'termination_time_needed = ', &
3459	termination_time_needed, ' must be > 30.0 on host "', &
3460	TRIM( host ), '"'
3461	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3462	ENDIF
3463	ELSEIF ( host(1:3) == 'ibm' ) THEN
3464	!
3465	!-- On IBM-regatta machines the time should be at least 300 seconds,
3466	!-- because the job time consumed before executing palm (for compiling,
3467	!-- copying of files, etc.) has to be regarded
3468	IF ( termination_time_needed < 300.0 ) THEN
3469	WRITE( message_string, * ) 'termination_time_needed = ', &
3470	termination_time_needed, ' should be >= 300.0 on host "', &
3471	TRIM( host ), '"'
3472	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3473	ENDIF
3474	ENDIF
3475
3476	!
3477	!-- Check pressure gradient conditions
3478	IF ( dp_external .AND. conserve_volume_flow ) THEN
3479	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3480	'w are .TRUE. but one of them must be .FALSE.'
3481	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3482	ENDIF
3483	IF ( dp_external ) THEN
3484	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3485	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3486	' of range'
3487	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3488	ENDIF
3489	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3490	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3491	'ro, i.e. the external pressure gradient & will not be applied'
3492	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3493	ENDIF
3494	ENDIF
3495	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3496	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3497	'.FALSE., i.e. the external pressure gradient & will not be applied'
3498	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3499	ENDIF
3500	IF ( conserve_volume_flow ) THEN
3501	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3502
3503	conserve_volume_flow_mode = 'initial_profiles'
3504
3505	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3506	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3507	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3508	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3509	conserve_volume_flow_mode
3510	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3511	ENDIF
3512	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3513	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3514	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3515	'require conserve_volume_flow_mode = ''initial_profiles'''
3516	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3517	ENDIF
3518	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3519	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3520	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3521	'require conserve_volume_flow_mode = ''initial_profiles''', &
3522	' or ''bulk_velocity'''
3523	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3524	ENDIF
3525	ENDIF
3526	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3527	( .NOT. conserve_volume_flow .OR. &
3528	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3529	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3530	'conserve_volume_flow = .T. and ', &
3531	'conserve_volume_flow_mode = ''bulk_velocity'''
3532	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3533	ENDIF
3534
3535	!
3536	!-- Check particle attributes
3537	IF ( particle_color /= 'none' ) THEN
3538	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3539	particle_color /= 'z' ) THEN
3540	message_string = 'illegal value for parameter particle_color: ' // &
3541	TRIM( particle_color)
3542	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3543	ELSE
3544	IF ( color_interval(2) <= color_interval(1) ) THEN
3545	message_string = 'color_interval(2) <= color_interval(1)'
3546	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3547	ENDIF
3548	ENDIF
3549	ENDIF
3550
3551	IF ( particle_dvrpsize /= 'none' ) THEN
3552	IF ( particle_dvrpsize /= 'absw' ) THEN
3553	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3554	' ' // TRIM( particle_color)
3555	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3556	ELSE
3557	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3558	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3559	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3560	ENDIF
3561	ENDIF
3562	ENDIF
3563
3564	!
3565	!-- Check &userpar parameters
3566	CALL user_check_parameters
3567
3568
3569
3570	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |