Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1165

Last change on this file since 1165 was 1160, checked in by fricke, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 138.5 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1160 2013-05-21 12:06:24Z raasch $
27	!
28	! 1159 2013-05-21 11:58:22Z fricke
29	! bc_lr/ns_dirneu/neudir removed
30	!
31	! 1115 2013-03-26 18:16:16Z hoffmann
32	! unused variables removed
33	! drizzle can be used without precipitation
34	!
35	! 1111 2013-03-08 23:54:10Z raasch
36	! ibc_p_b = 2 removed
37	!
38	! 1103 2013-02-20 02:15:53Z raasch
39	! Bugfix: turbulent inflow must not require cyclic fill in restart runs
40	!
41	! 1092 2013-02-02 11:24:22Z raasch
42	! unused variables removed
43	!
44	! 1069 2012-11-28 16:18:43Z maronga
45	! allow usage of topography in combination with cloud physics
46	!
47	! 1065 2012-11-22 17:42:36Z hoffmann
48	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
49	! precipitation in order to save computational resources.
50	!
51	! 1060 2012-11-21 07:19:51Z raasch
52	! additional check for parameter turbulent_inflow
53	!
54	! 1053 2012-11-13 17:11:03Z hoffmann
55	! necessary changes for the new two-moment cloud physics scheme added:
56	! - check cloud physics scheme (Kessler or Seifert and Beheng)
57	! - plant_canopy is not allowed
58	! - currently, only cache loop_optimization is allowed
59	! - initial profiles of nr, qr
60	! - boundary condition of nr, qr
61	! - check output quantities (qr, nr, prr)
62	!
63	! 1036 2012-10-22 13:43:42Z raasch
64	! code put under GPL (PALM 3.9)
65	!
66	! 1031/1034 2012-10-22 11:32:49Z raasch
67	! check of netcdf4 parallel file support
68	!
69	! 1019 2012-09-28 06:46:45Z raasch
70	! non-optimized version of prognostic_equations not allowed any more
71	!
72	! 1015 2012-09-27 09:23:24Z raasch
73	! acc allowed for loop optimization,
74	! checks for adjustment of mixing length to the Prandtl mixing length removed
75	!
76	! 1003 2012-09-14 14:35:53Z raasch
77	! checks for cases with unequal subdomain sizes removed
78	!
79	! 1001 2012-09-13 14:08:46Z raasch
80	! all actions concerning leapfrog- and upstream-spline-scheme removed
81	!
82	! 996 2012-09-07 10:41:47Z raasch
83	! little reformatting
84
85	! 978 2012-08-09 08:28:32Z fricke
86	! setting of bc_lr/ns_dirneu/neudir
87	! outflow damping layer removed
88	! check for z0h*
89	! check for pt_damping_width
90	!
91	! 964 2012-07-26 09:14:24Z raasch
92	! check of old profil-parameters removed
93	!
94	! 940 2012-07-09 14:31:00Z raasch
95	! checks for parameter neutral
96	!
97	! 924 2012-06-06 07:44:41Z maronga
98	! Bugfix: preprocessor directives caused error during compilation
99	!
100	! 892 2012-05-02 13:51:44Z maronga
101	! Bugfix for parameter file check ( excluding __netcdf4 )
102	!
103	! 866 2012-03-28 06:44:41Z raasch
104	! use only 60% of the geostrophic wind as translation speed in case of Galilean
105	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
106	! timestep
107	!
108	! 861 2012-03-26 14:18:34Z suehring
109	! Check for topography and ws-scheme removed.
110	! Check for loop_optimization = 'vector' and ws-scheme removed.
111	!
112	! 845 2012-03-07 10:23:05Z maronga
113	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
114	!
115	! 828 2012-02-21 12:00:36Z raasch
116	! check of collision_kernel extended
117	!
118	! 825 2012-02-19 03:03:44Z raasch
119	! check for collision_kernel and curvature_solution_effects
120	!
121	! 809 2012-01-30 13:32:58Z maronga
122	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
123	!
124	! 807 2012-01-25 11:53:51Z maronga
125	! New cpp directive "__check" implemented which is used by check_namelist_files
126	!
127	! 774 2011-10-27 13:34:16Z letzel
128	! bugfix for prescribed u,v-profiles
129	!
130	! 767 2011-10-14 06:39:12Z raasch
131	! Calculating u,v-profiles from given profiles by linear interpolation.
132	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
133	!
134	! 707 2011-03-29 11:39:40Z raasch
135	! setting of bc_lr/ns_dirrad/raddir
136	!
137	! 689 2011-02-20 19:31:12z gryschka
138	! Bugfix for some logical expressions
139	! (syntax was not compatible with all compilers)
140	!
141	! 680 2011-02-04 23:16:06Z gryschka
142	! init_vortex is not allowed with volume_flow_control
143	!
144	! 673 2011-01-18 16:19:48Z suehring
145	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
146	!
147	! 667 2010-12-23 12:06:00Z suehring/gryschka
148	! Exchange of parameters between ocean and atmosphere via PE0
149	! Check for illegal combination of ws-scheme and timestep scheme.
150	! Check for topography and ws-scheme.
151	! Check for not cyclic boundary conditions in combination with ws-scheme and
152	! loop_optimization = 'vector'.
153	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
154	! Different processor/grid topology in atmosphere and ocean is now allowed!
155	! Bugfixes in checking for conserve_volume_flow_mode
156	! 600 2010-11-24 16:10:51Z raasch
157	! change due to new default value of surface_waterflux
158	! 580 2010-10-05 13:59:11Z heinze
159	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
160	!
161	! 567 2010-10-01 10:46:30Z helmke
162	! calculating masks changed
163	!
164	! 564 2010-09-30 13:18:59Z helmke
165	! palm message identifiers of masked output changed, 20 replaced by max_masks
166	!
167	! 553 2010-09-01 14:09:06Z weinreis
168	! masks is calculated and removed from inipar
169	!
170	! 531 2010-04-21 06:47:21Z heinze
171	! Bugfix: unit of hyp changed to dbar
172	!
173	! 524 2010-03-30 02:04:51Z raasch
174	! Bugfix: "/" in netcdf profile variable names replaced by ":"
175	!
176	! 493 2010-03-01 08:30:24Z raasch
177	! netcdf_data_format is checked
178	!
179	! 411 2009-12-11 14:15:58Z heinze
180	! Enabled passive scalar/humidity wall fluxes for non-flat topography
181	! Initialization of large scale vertical motion (subsidence/ascent)
182	!
183	! 410 2009-12-04 17:05:40Z letzel
184	! masked data output
185	!
186	! 388 2009-09-23 09:40:33Z raasch
187	! Check profiles fpr prho and hyp.
188	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
189	! interval has been set, respective error message is included
190	! bc_lr_cyc and bc_ns_cyc are set,
191	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
192	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
193	! Coupling with independent precursor runs.
194	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
195	! Bugfix: pressure included for profile output
196	! Check pressure gradient conditions
197	! topography_grid_convention moved from user_check_parameters
198	! 'single_street_canyon'
199	! Added shf* and qsws* to the list of available output data
200	!
201	! 222 2009-01-12 16:04:16Z letzel
202	! +user_check_parameters
203	! Output of messages replaced by message handling routine.
204	! Implementation of an MPI-1 coupling: replaced myid with target_id,
205	! deleted __mpi2 directives
206	! Check that PALM is called with mrun -K parallel for coupling
207	!
208	! 197 2008-09-16 15:29:03Z raasch
209	! Bug fix: Construction of vertical profiles when 10 gradients have been
210	! specified in the parameter list (ug, vg, pt, q, sa, lad)
211	!
212	! Strict grid matching along z is not needed for mg-solver.
213	! Leaf area density (LAD) explicitly set to its surface value at k=0
214	! Case of reading data for recycling included in initializing_actions,
215	! check of turbulent_inflow and calculation of recycling_plane.
216	! q*2 profile added
217	!
218	! 138 2007-11-28 10:03:58Z letzel
219	! Plant canopy added
220	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
221	! Multigrid solver allows topography, checking of dt_sort_particles
222	! Bugfix: initializing u_init and v_init in case of ocean runs
223	!
224	! 109 2007-08-28 15:26:47Z letzel
225	! Check coupling_mode and set default (obligatory) values (like boundary
226	! conditions for temperature and fluxes) in case of coupled runs.
227	! +profiles for wp and w"e
228	! Bugfix: Error message concerning output of particle concentration (pc)
229	! modified
230	! More checks and more default values for coupled runs
231	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
232	! cloud_physics = .T.)
233	! Rayleigh damping for ocean fixed.
234	! Check and, if necessary, set default value for dt_coupling
235	!
236	! 97 2007-06-21 08:23:15Z raasch
237	! Initial salinity profile is calculated, salinity boundary conditions are
238	! checked,
239	! z_max_do1d is checked only in case of ocean = .f.,
240	! +initial temperature and geostrophic velocity profiles for the ocean version,
241	! use_pt_reference renamed use_reference
242	!
243	! 89 2007-05-25 12:08:31Z raasch
244	! Check for user-defined profiles
245	!
246	! 75 2007-03-22 09:54:05Z raasch
247	! "by_user" allowed as initializing action, -data_output_ts,
248	! leapfrog with non-flat topography not allowed any more, loop_optimization
249	! and pt_reference are checked, moisture renamed humidity,
250	! output of precipitation amount/rate and roughnes length + check
251	! possible negative humidities are avoided in initial profile,
252	! dirichlet/neumann changed to dirichlet/radiation, etc.,
253	! revision added to run_description_header
254	!
255	! 20 2007-02-26 00:12:32Z raasch
256	! Temperature and humidity gradients at top are now calculated for nzt+1,
257	! top_heatflux and respective boundary condition bc_pt_t is checked
258	!
259	! RCS Log replace by Id keyword, revision history cleaned up
260	!
261	! Revision 1.61 2006/08/04 14:20:25 raasch
262	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
263	! use_upstream_for_tke, default value for dt_dopts,
264	! generation of file header moved from routines palm and header to here
265	!
266	! Revision 1.1 1997/08/26 06:29:23 raasch
267	! Initial revision
268	!
269	!
270	! Description:
271	! ------------
272	! Check control parameters and deduce further quantities.
273	!------------------------------------------------------------------------------!
274
275	USE arrays_3d
276	USE cloud_parameters
277	USE constants
278	USE control_parameters
279	USE dvrp_variables
280	USE grid_variables
281	USE indices
282	USE model_1d
283	USE netcdf_control
284	USE particle_attributes
285	USE pegrid
286	USE profil_parameter
287	USE subsidence_mod
288	USE statistics
289	USE transpose_indices
290
291	IMPLICIT NONE
292
293	CHARACTER (LEN=1) :: sq
294	CHARACTER (LEN=6) :: var
295	CHARACTER (LEN=7) :: unit
296	CHARACTER (LEN=8) :: date
297	CHARACTER (LEN=10) :: time
298	CHARACTER (LEN=40) :: coupling_string
299	CHARACTER (LEN=100) :: action
300
301	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
302	LOGICAL :: found, ldum
303	REAL :: gradient, remote = 0.0, simulation_time_since_reference
304
305	!
306	!-- Warning, if host is not set
307	IF ( host(1:1) == ' ' ) THEN
308	message_string = '"host" is not set. Please check that environment ' // &
309	'variable "localhost" & is set before running PALM'
310	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
311	ENDIF
312
313	!
314	!-- Check the coupling mode
315	IF ( coupling_mode /= 'uncoupled' .AND. &
316	coupling_mode /= 'atmosphere_to_ocean' .AND. &
317	coupling_mode /= 'ocean_to_atmosphere' ) THEN
318	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
319	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
320	ENDIF
321
322	!
323	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
324	IF ( coupling_mode /= 'uncoupled') THEN
325
326	IF ( dt_coupling == 9999999.9 ) THEN
327	message_string = 'dt_coupling is not set but required for coup' // &
328	'ling mode "' // TRIM( coupling_mode ) // '"'
329	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
330	ENDIF
331
332	#if defined( __parallel )
333
334	!
335	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
336	!-- program.
337	!-- check_namelist_files will need the following information of the other
338	!-- model (atmosphere/ocean).
339	! dt_coupling = remote
340	! dt_max = remote
341	! restart_time = remote
342	! dt_restart= remote
343	! simulation_time_since_reference = remote
344	! dx = remote
345
346
347	#if ! defined( __check )
348	IF ( myid == 0 ) THEN
349	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
350	ierr )
351	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
352	status, ierr )
353	ENDIF
354	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
355	#endif
356	IF ( dt_coupling /= remote ) THEN
357	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
358	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
359	'dt_coupling_remote = ', remote
360	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
361	ENDIF
362	IF ( dt_coupling <= 0.0 ) THEN
363	#if ! defined( __check )
364	IF ( myid == 0 ) THEN
365	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
366	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
367	status, ierr )
368	ENDIF
369	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
370	#endif
371	dt_coupling = MAX( dt_max, remote )
372	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
373	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
374	'MAX(dt_max(A,O)) = ', dt_coupling
375	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
376	ENDIF
377	#if ! defined( __check )
378	IF ( myid == 0 ) THEN
379	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
380	ierr )
381	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
382	status, ierr )
383	ENDIF
384	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
385	#endif
386	IF ( restart_time /= remote ) THEN
387	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
388	'": restart_time = ', restart_time, '& is not equal to ', &
389	'restart_time_remote = ', remote
390	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
391	ENDIF
392	#if ! defined( __check )
393	IF ( myid == 0 ) THEN
394	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
395	ierr )
396	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
397	status, ierr )
398	ENDIF
399	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
400	#endif
401	IF ( dt_restart /= remote ) THEN
402	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
403	'": dt_restart = ', dt_restart, '& is not equal to ', &
404	'dt_restart_remote = ', remote
405	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
406	ENDIF
407
408	simulation_time_since_reference = end_time - coupling_start_time
409	#if ! defined( __check )
410	IF ( myid == 0 ) THEN
411	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
412	14, comm_inter, ierr )
413	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
414	status, ierr )
415	ENDIF
416	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
417	#endif
418	IF ( simulation_time_since_reference /= remote ) THEN
419	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
420	'": simulation_time_since_reference = ', &
421	simulation_time_since_reference, '& is not equal to ', &
422	'simulation_time_since_reference_remote = ', remote
423	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
424	ENDIF
425
426	#if ! defined( __check )
427	IF ( myid == 0 ) THEN
428	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
429	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
430	status, ierr )
431	ENDIF
432	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
433
434	#endif
435	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
436
437	IF ( dx < remote ) THEN
438	WRITE( message_string, * ) 'coupling mode "', &
439	TRIM( coupling_mode ), &
440	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
441	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
442	ENDIF
443
444	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
445	WRITE( message_string, * ) 'coupling mode "', &
446	TRIM( coupling_mode ), &
447	'": Domain size in x-direction is not equal in ocean and atmosphere'
448	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
449	ENDIF
450
451	ENDIF
452
453	#if ! defined( __check )
454	IF ( myid == 0) THEN
455	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
456	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
457	status, ierr )
458	ENDIF
459	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
460	#endif
461	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
462
463	IF ( dy < remote ) THEN
464	WRITE( message_string, * ) 'coupling mode "', &
465	TRIM( coupling_mode ), &
466	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
467	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
468	ENDIF
469
470	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
471	WRITE( message_string, * ) 'coupling mode "', &
472	TRIM( coupling_mode ), &
473	'": Domain size in y-direction is not equal in ocean and atmosphere'
474	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
475	ENDIF
476
477	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
478	WRITE( message_string, * ) 'coupling mode "', &
479	TRIM( coupling_mode ), &
480	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
481	' atmosphere'
482	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
483	ENDIF
484
485	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
486	WRITE( message_string, * ) 'coupling mode "', &
487	TRIM( coupling_mode ), &
488	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
489	' atmosphere'
490	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
491	ENDIF
492
493	ENDIF
494	#else
495	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
496	' ''mrun -K parallel'''
497	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
498	#endif
499	ENDIF
500
501	#if defined( __parallel ) && ! defined ( __check )
502	!
503	!-- Exchange via intercommunicator
504	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
505	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
506	ierr )
507	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
508	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
509	comm_inter, status, ierr )
510	ENDIF
511	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
512
513	#endif
514
515
516	!
517	!-- Generate the file header which is used as a header for most of PALM's
518	!-- output files
519	CALL DATE_AND_TIME( date, time )
520	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
521	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
522	IF ( coupling_mode == 'uncoupled' ) THEN
523	coupling_string = ''
524	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
525	coupling_string = ' coupled (atmosphere)'
526	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
527	coupling_string = ' coupled (ocean)'
528	ENDIF
529
530	WRITE ( run_description_header, &
531	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
532	TRIM( version ), TRIM( revision ), 'run: ', &
533	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
534	'host: ', TRIM( host ), run_date, run_time
535
536	!
537	!-- Check the general loop optimization method
538	IF ( loop_optimization == 'default' ) THEN
539	IF ( host(1:3) == 'nec' ) THEN
540	loop_optimization = 'vector'
541	ELSE
542	loop_optimization = 'cache'
543	ENDIF
544	ENDIF
545
546	SELECT CASE ( TRIM( loop_optimization ) )
547
548	CASE ( 'acc', 'cache', 'vector' )
549	CONTINUE
550
551	CASE DEFAULT
552	message_string = 'illegal value given for loop_optimization: "' // &
553	TRIM( loop_optimization ) // '"'
554	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
555
556	END SELECT
557
558	!
559	!-- Check topography setting (check for illegal parameter combinations)
560	IF ( topography /= 'flat' ) THEN
561	action = ' '
562	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
563	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
564	ENDIF
565	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
566	THEN
567	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
568	ENDIF
569	IF ( psolver == 'sor' ) THEN
570	WRITE( action, '(A,A)' ) 'psolver = ', psolver
571	ENDIF
572	IF ( sloping_surface ) THEN
573	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
574	ENDIF
575	IF ( galilei_transformation ) THEN
576	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
577	ENDIF
578	IF ( cloud_physics ) THEN
579	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
580	ENDIF
581	IF ( cloud_droplets ) THEN
582	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
583	ENDIF
584	IF ( .NOT. prandtl_layer ) THEN
585	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
586	ENDIF
587	IF ( action /= ' ' ) THEN
588	message_string = 'a non-flat topography does not allow ' // &
589	TRIM( action )
590	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
591	ENDIF
592	!
593	!-- In case of non-flat topography, check whether the convention how to
594	!-- define the topography grid has been set correctly, or whether the default
595	!-- is applicable. If this is not possible, abort.
596	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
597	IF ( TRIM( topography ) /= 'single_building' .AND. &
598	TRIM( topography ) /= 'single_street_canyon' .AND. &
599	TRIM( topography ) /= 'read_from_file' ) THEN
600	!-- The default value is not applicable here, because it is only valid
601	!-- for the two standard cases 'single_building' and 'read_from_file'
602	!-- defined in init_grid.
603	WRITE( message_string, * ) &
604	'The value for "topography_grid_convention" ', &
605	'is not set. Its default value is & only valid for ', &
606	'"topography" = ''single_building'', ', &
607	'''single_street_canyon'' & or ''read_from_file''.', &
608	' & Choose ''cell_edge'' or ''cell_center''.'
609	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
610	ELSE
611	!-- The default value is applicable here.
612	!-- Set convention according to topography.
613	IF ( TRIM( topography ) == 'single_building' .OR. &
614	TRIM( topography ) == 'single_street_canyon' ) THEN
615	topography_grid_convention = 'cell_edge'
616	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
617	topography_grid_convention = 'cell_center'
618	ENDIF
619	ENDIF
620	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
621	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
622	WRITE( message_string, * ) &
623	'The value for "topography_grid_convention" is ', &
624	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
625	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
626	ENDIF
627
628	ENDIF
629
630	!
631	!-- Check ocean setting
632	IF ( ocean ) THEN
633
634	action = ' '
635	IF ( action /= ' ' ) THEN
636	message_string = 'ocean = .T. does not allow ' // TRIM( action )
637	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
638	ENDIF
639
640	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
641	TRIM( coupling_char ) == '_O' ) THEN
642
643	!
644	!-- Check whether an (uncoupled) atmospheric run has been declared as an
645	!-- ocean run (this setting is done via mrun-option -y)
646
647	message_string = 'ocean = .F. does not allow coupling_char = "' // &
648	TRIM( coupling_char ) // '" set by mrun-option "-y"'
649	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
650
651	ENDIF
652	!
653	!-- Check cloud scheme
654	IF ( cloud_scheme == 'seifert_beheng' ) THEN
655	icloud_scheme = 0
656	ELSEIF ( cloud_scheme == 'kessler' ) THEN
657	icloud_scheme = 1
658	ELSE
659	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
660	TRIM( cloud_scheme ) // '"'
661	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
662	ENDIF
663	!
664	!-- Check whether there are any illegal values
665	!-- Pressure solver:
666	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
667	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
668	message_string = 'unknown solver for perturbation pressure: psolver' // &
669	' = "' // TRIM( psolver ) // '"'
670	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
671	ENDIF
672
673	#if defined( __parallel )
674	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
675	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
676	'for a 1d domain-decomposition along x & please do' // &
677	' not set npey/=1 in the parameter file'
678	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
679	ENDIF
680	#else
681	IF ( psolver == 'poisfft_hybrid' ) THEN
682	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
683	' for a parallel environment'
684	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
685	ENDIF
686	#endif
687
688	IF ( psolver == 'multigrid' ) THEN
689	IF ( cycle_mg == 'w' ) THEN
690	gamma_mg = 2
691	ELSEIF ( cycle_mg == 'v' ) THEN
692	gamma_mg = 1
693	ELSE
694	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
695	TRIM( cycle_mg ) // '"'
696	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
697	ENDIF
698	ENDIF
699
700	IF ( fft_method /= 'singleton-algorithm' .AND. &
701	fft_method /= 'temperton-algorithm' .AND. &
702	fft_method /= 'system-specific' ) THEN
703	message_string = 'unknown fft-algorithm: fft_method = "' // &
704	TRIM( fft_method ) // '"'
705	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
706	ENDIF
707
708	IF( momentum_advec == 'ws-scheme' .AND. &
709	.NOT. call_psolver_at_all_substeps ) THEN
710	message_string = 'psolver must be called at each RK3 substep when "'//&
711	TRIM(momentum_advec) // ' "is used for momentum_advec'
712	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
713	END IF
714	!
715	!-- Advection schemes:
716	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
717	THEN
718	message_string = 'unknown advection scheme: momentum_advec = "' // &
719	TRIM( momentum_advec ) // '"'
720	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
721	ENDIF
722	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
723	.AND. ( timestep_scheme == 'euler' .OR. &
724	timestep_scheme == 'runge-kutta-2' ) ) &
725	THEN
726	message_string = 'momentum_advec or scalar_advec = "' &
727	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
728	TRIM( timestep_scheme ) // '"'
729	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
730	ENDIF
731	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
732	scalar_advec /= 'bc-scheme' ) &
733	THEN
734	message_string = 'unknown advection scheme: scalar_advec = "' // &
735	TRIM( scalar_advec ) // '"'
736	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
737	ENDIF
738	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
739	THEN
740	message_string = 'advection_scheme scalar_advec = "' &
741	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
742	TRIM( loop_optimization ) // '"'
743	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
744	ENDIF
745
746	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
747	use_upstream_for_tke = .TRUE.
748	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
749	'use_sgs_for_particles = .TRUE.'
750	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
751	ENDIF
752
753	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
754	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
755	'curvature_solution_effects = .TRUE.'
756	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
757	ENDIF
758
759	!
760	!-- Set LOGICAL switches to enhance performance
761	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
762	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
763
764	!
765	!-- Timestep schemes:
766	SELECT CASE ( TRIM( timestep_scheme ) )
767
768	CASE ( 'euler' )
769	intermediate_timestep_count_max = 1
770
771	CASE ( 'runge-kutta-2' )
772	intermediate_timestep_count_max = 2
773
774	CASE ( 'runge-kutta-3' )
775	intermediate_timestep_count_max = 3
776
777	CASE DEFAULT
778	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
779	TRIM( timestep_scheme ) // '"'
780	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
781
782	END SELECT
783
784	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
785	.AND. timestep_scheme(1:5) == 'runge' ) THEN
786	message_string = 'momentum advection scheme "' // &
787	TRIM( momentum_advec ) // '" & does not work with ' // &
788	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
789	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
790	ENDIF
791
792	!
793	!-- Collision kernels:
794	SELECT CASE ( TRIM( collision_kernel ) )
795
796	CASE ( 'hall', 'hall_fast' )
797	hall_kernel = .TRUE.
798
799	CASE ( 'palm' )
800	palm_kernel = .TRUE.
801
802	CASE ( 'wang', 'wang_fast' )
803	wang_kernel = .TRUE.
804
805	CASE ( 'none' )
806
807
808	CASE DEFAULT
809	message_string = 'unknown collision kernel: collision_kernel = "' // &
810	TRIM( collision_kernel ) // '"'
811	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
812
813	END SELECT
814	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
815
816	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
817	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
818	!
819	!-- No restart run: several initialising actions are possible
820	action = initializing_actions
821	DO WHILE ( TRIM( action ) /= '' )
822	position = INDEX( action, ' ' )
823	SELECT CASE ( action(1:position-1) )
824
825	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
826	'by_user', 'initialize_vortex', 'initialize_ptanom' )
827	action = action(position+1:)
828
829	CASE DEFAULT
830	message_string = 'initializing_action = "' // &
831	TRIM( action ) // '" unkown or not allowed'
832	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
833
834	END SELECT
835	ENDDO
836	ENDIF
837
838	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
839	conserve_volume_flow ) THEN
840	message_string = 'initializing_actions = "initialize_vortex"' // &
841	' ist not allowed with conserve_volume_flow = .T.'
842	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
843	ENDIF
844
845
846	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
847	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
848	message_string = 'initializing_actions = "set_constant_profiles"' // &
849	' and "set_1d-model_profiles" are not allowed ' // &
850	'simultaneously'
851	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
852	ENDIF
853
854	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
855	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
856	message_string = 'initializing_actions = "set_constant_profiles"' // &
857	' and "by_user" are not allowed simultaneously'
858	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
859	ENDIF
860
861	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
862	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
863	message_string = 'initializing_actions = "by_user" and ' // &
864	'"set_1d-model_profiles" are not allowed simultaneously'
865	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
866	ENDIF
867
868	IF ( cloud_physics .AND. .NOT. humidity ) THEN
869	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
870	'not allowed with humidity = ', humidity
871	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
872	ENDIF
873
874	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
875	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
876	'not allowed with cloud_physics = ', cloud_physics
877	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
878	ENDIF
879
880	IF ( humidity .AND. sloping_surface ) THEN
881	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
882	'are not allowed simultaneously'
883	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
884	ENDIF
885
886	IF ( passive_scalar .AND. humidity ) THEN
887	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
888	'is not allowed simultaneously'
889	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
890	ENDIF
891
892	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
893	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
894	'coefficient & given value is drag_coefficient = 0.0'
895	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
896	ENDIF
897
898	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
899	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
900	' seifert_beheng'
901	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
902	ENDIF
903
904	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
905	icloud_scheme == 0 ) THEN
906	message_string = 'cloud_scheme = seifert_beheng requires ' // &
907	'loop_optimization = cache'
908	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
909	ENDIF
910
911	! IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
912	! .NOT. precipitation .AND. .NOT. drizzle ) THEN
913	! message_string = 'cloud_scheme = seifert_beheng requires ' // &
914	! 'precipitation = .TRUE. or drizzle = .TRUE.'
915	! CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
916	! ENDIF
917
918	!
919	!-- In case of no model continuation run, check initialising parameters and
920	!-- deduce further quantities
921	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
922
923	!
924	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
925	pt_init = pt_surface
926	IF ( humidity ) THEN
927	q_init = q_surface
928	ENDIF
929	IF ( ocean ) sa_init = sa_surface
930	IF ( passive_scalar ) q_init = s_surface
931	IF ( plant_canopy ) lad = 0.0
932
933	!
934	!--
935	!-- If required, compute initial profile of the geostrophic wind
936	!-- (component ug)
937	i = 1
938	gradient = 0.0
939
940	IF ( .NOT. ocean ) THEN
941
942	ug_vertical_gradient_level_ind(1) = 0
943	ug(0) = ug_surface
944	DO k = 1, nzt+1
945	IF ( i < 11 ) THEN
946	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
947	ug_vertical_gradient_level(i) >= 0.0 ) THEN
948	gradient = ug_vertical_gradient(i) / 100.0
949	ug_vertical_gradient_level_ind(i) = k - 1
950	i = i + 1
951	ENDIF
952	ENDIF
953	IF ( gradient /= 0.0 ) THEN
954	IF ( k /= 1 ) THEN
955	ug(k) = ug(k-1) + dzu(k) * gradient
956	ELSE
957	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
958	ENDIF
959	ELSE
960	ug(k) = ug(k-1)
961	ENDIF
962	ENDDO
963
964	ELSE
965
966	ug_vertical_gradient_level_ind(1) = nzt+1
967	ug(nzt+1) = ug_surface
968	DO k = nzt, nzb, -1
969	IF ( i < 11 ) THEN
970	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
971	ug_vertical_gradient_level(i) <= 0.0 ) THEN
972	gradient = ug_vertical_gradient(i) / 100.0
973	ug_vertical_gradient_level_ind(i) = k + 1
974	i = i + 1
975	ENDIF
976	ENDIF
977	IF ( gradient /= 0.0 ) THEN
978	IF ( k /= nzt ) THEN
979	ug(k) = ug(k+1) - dzu(k+1) * gradient
980	ELSE
981	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
982	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
983	ENDIF
984	ELSE
985	ug(k) = ug(k+1)
986	ENDIF
987	ENDDO
988
989	ENDIF
990
991	!
992	!-- In case of no given gradients for ug, choose a zero gradient
993	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
994	ug_vertical_gradient_level(1) = 0.0
995	ENDIF
996
997	!
998	!--
999	!-- If required, compute initial profile of the geostrophic wind
1000	!-- (component vg)
1001	i = 1
1002	gradient = 0.0
1003
1004	IF ( .NOT. ocean ) THEN
1005
1006	vg_vertical_gradient_level_ind(1) = 0
1007	vg(0) = vg_surface
1008	DO k = 1, nzt+1
1009	IF ( i < 11 ) THEN
1010	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1011	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1012	gradient = vg_vertical_gradient(i) / 100.0
1013	vg_vertical_gradient_level_ind(i) = k - 1
1014	i = i + 1
1015	ENDIF
1016	ENDIF
1017	IF ( gradient /= 0.0 ) THEN
1018	IF ( k /= 1 ) THEN
1019	vg(k) = vg(k-1) + dzu(k) * gradient
1020	ELSE
1021	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
1022	ENDIF
1023	ELSE
1024	vg(k) = vg(k-1)
1025	ENDIF
1026	ENDDO
1027
1028	ELSE
1029
1030	vg_vertical_gradient_level_ind(1) = nzt+1
1031	vg(nzt+1) = vg_surface
1032	DO k = nzt, nzb, -1
1033	IF ( i < 11 ) THEN
1034	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1035	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1036	gradient = vg_vertical_gradient(i) / 100.0
1037	vg_vertical_gradient_level_ind(i) = k + 1
1038	i = i + 1
1039	ENDIF
1040	ENDIF
1041	IF ( gradient /= 0.0 ) THEN
1042	IF ( k /= nzt ) THEN
1043	vg(k) = vg(k+1) - dzu(k+1) * gradient
1044	ELSE
1045	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1046	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1047	ENDIF
1048	ELSE
1049	vg(k) = vg(k+1)
1050	ENDIF
1051	ENDDO
1052
1053	ENDIF
1054
1055	!
1056	!-- In case of no given gradients for vg, choose a zero gradient
1057	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1058	vg_vertical_gradient_level(1) = 0.0
1059	ENDIF
1060
1061	!
1062	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1063	!-- interpolate them from wind profile data (if given)
1064	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1065
1066	u_init = ug
1067	v_init = vg
1068
1069	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1070
1071	IF ( uv_heights(1) /= 0.0 ) THEN
1072	message_string = 'uv_heights(1) must be 0.0'
1073	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1074	ENDIF
1075
1076	use_prescribed_profile_data = .TRUE.
1077
1078	kk = 1
1079	u_init(0) = 0.0
1080	v_init(0) = 0.0
1081
1082	DO k = 1, nz+1
1083
1084	IF ( kk < 100 ) THEN
1085	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1086	kk = kk + 1
1087	IF ( kk == 100 ) EXIT
1088	ENDDO
1089	ENDIF
1090
1091	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1092	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1093	( uv_heights(kk+1) - uv_heights(kk) ) * &
1094	( u_profile(kk+1) - u_profile(kk) )
1095	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1096	( uv_heights(kk+1) - uv_heights(kk) ) * &
1097	( v_profile(kk+1) - v_profile(kk) )
1098	ELSE
1099	u_init(k) = u_profile(kk)
1100	v_init(k) = v_profile(kk)
1101	ENDIF
1102
1103	ENDDO
1104
1105	ELSE
1106
1107	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1108	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1109
1110	ENDIF
1111
1112	!
1113	!-- Compute initial temperature profile using the given temperature gradients
1114	IF ( .NOT. neutral ) THEN
1115
1116	i = 1
1117	gradient = 0.0
1118
1119	IF ( .NOT. ocean ) THEN
1120
1121	pt_vertical_gradient_level_ind(1) = 0
1122	DO k = 1, nzt+1
1123	IF ( i < 11 ) THEN
1124	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1125	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1126	gradient = pt_vertical_gradient(i) / 100.0
1127	pt_vertical_gradient_level_ind(i) = k - 1
1128	i = i + 1
1129	ENDIF
1130	ENDIF
1131	IF ( gradient /= 0.0 ) THEN
1132	IF ( k /= 1 ) THEN
1133	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1134	ELSE
1135	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
1136	ENDIF
1137	ELSE
1138	pt_init(k) = pt_init(k-1)
1139	ENDIF
1140	ENDDO
1141
1142	ELSE
1143
1144	pt_vertical_gradient_level_ind(1) = nzt+1
1145	DO k = nzt, 0, -1
1146	IF ( i < 11 ) THEN
1147	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1148	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1149	gradient = pt_vertical_gradient(i) / 100.0
1150	pt_vertical_gradient_level_ind(i) = k + 1
1151	i = i + 1
1152	ENDIF
1153	ENDIF
1154	IF ( gradient /= 0.0 ) THEN
1155	IF ( k /= nzt ) THEN
1156	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1157	ELSE
1158	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1159	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1160	ENDIF
1161	ELSE
1162	pt_init(k) = pt_init(k+1)
1163	ENDIF
1164	ENDDO
1165
1166	ENDIF
1167
1168	ENDIF
1169
1170	!
1171	!-- In case of no given temperature gradients, choose gradient of neutral
1172	!-- stratification
1173	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1174	pt_vertical_gradient_level(1) = 0.0
1175	ENDIF
1176
1177	!
1178	!-- Store temperature gradient at the top boundary for possible Neumann
1179	!-- boundary condition
1180	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1181
1182	!
1183	!-- If required, compute initial humidity or scalar profile using the given
1184	!-- humidity/scalar gradient. In case of scalar transport, initially store
1185	!-- values of the scalar parameters on humidity parameters
1186	IF ( passive_scalar ) THEN
1187	bc_q_b = bc_s_b
1188	bc_q_t = bc_s_t
1189	q_surface = s_surface
1190	q_surface_initial_change = s_surface_initial_change
1191	q_vertical_gradient = s_vertical_gradient
1192	q_vertical_gradient_level = s_vertical_gradient_level
1193	surface_waterflux = surface_scalarflux
1194	wall_humidityflux = wall_scalarflux
1195	ENDIF
1196
1197	IF ( humidity .OR. passive_scalar ) THEN
1198
1199	i = 1
1200	gradient = 0.0
1201	q_vertical_gradient_level_ind(1) = 0
1202	DO k = 1, nzt+1
1203	IF ( i < 11 ) THEN
1204	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1205	q_vertical_gradient_level(i) >= 0.0 ) THEN
1206	gradient = q_vertical_gradient(i) / 100.0
1207	q_vertical_gradient_level_ind(i) = k - 1
1208	i = i + 1
1209	ENDIF
1210	ENDIF
1211	IF ( gradient /= 0.0 ) THEN
1212	IF ( k /= 1 ) THEN
1213	q_init(k) = q_init(k-1) + dzu(k) * gradient
1214	ELSE
1215	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1216	ENDIF
1217	ELSE
1218	q_init(k) = q_init(k-1)
1219	ENDIF
1220	!
1221	!-- Avoid negative humidities
1222	IF ( q_init(k) < 0.0 ) THEN
1223	q_init(k) = 0.0
1224	ENDIF
1225	ENDDO
1226
1227	!
1228	!-- In case of no given humidity gradients, choose zero gradient
1229	!-- conditions
1230	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1231	q_vertical_gradient_level(1) = 0.0
1232	ENDIF
1233	!
1234	!-- Store humidity, rain water content and rain drop concentration
1235	!-- gradient at the top boundary for possile Neumann boundary condition
1236	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1237	ENDIF
1238
1239	!
1240	!-- If required, compute initial salinity profile using the given salinity
1241	!-- gradients
1242	IF ( ocean ) THEN
1243
1244	i = 1
1245	gradient = 0.0
1246
1247	sa_vertical_gradient_level_ind(1) = nzt+1
1248	DO k = nzt, 0, -1
1249	IF ( i < 11 ) THEN
1250	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1251	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1252	gradient = sa_vertical_gradient(i) / 100.0
1253	sa_vertical_gradient_level_ind(i) = k + 1
1254	i = i + 1
1255	ENDIF
1256	ENDIF
1257	IF ( gradient /= 0.0 ) THEN
1258	IF ( k /= nzt ) THEN
1259	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1260	ELSE
1261	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1262	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1263	ENDIF
1264	ELSE
1265	sa_init(k) = sa_init(k+1)
1266	ENDIF
1267	ENDDO
1268
1269	ENDIF
1270
1271	!
1272	!-- If required compute the profile of leaf area density used in the plant
1273	!-- canopy model
1274	IF ( plant_canopy ) THEN
1275
1276	i = 1
1277	gradient = 0.0
1278
1279	IF ( .NOT. ocean ) THEN
1280
1281	lad(0) = lad_surface
1282
1283	lad_vertical_gradient_level_ind(1) = 0
1284	DO k = 1, pch_index
1285	IF ( i < 11 ) THEN
1286	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1287	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1288	gradient = lad_vertical_gradient(i)
1289	lad_vertical_gradient_level_ind(i) = k - 1
1290	i = i + 1
1291	ENDIF
1292	ENDIF
1293	IF ( gradient /= 0.0 ) THEN
1294	IF ( k /= 1 ) THEN
1295	lad(k) = lad(k-1) + dzu(k) * gradient
1296	ELSE
1297	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1298	ENDIF
1299	ELSE
1300	lad(k) = lad(k-1)
1301	ENDIF
1302	ENDDO
1303
1304	ENDIF
1305
1306	!
1307	!-- In case of no given leaf area density gradients, choose a vanishing
1308	!-- gradient
1309	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1310	lad_vertical_gradient_level(1) = 0.0
1311	ENDIF
1312
1313	ENDIF
1314
1315	ENDIF
1316
1317	!
1318	!-- Initialize large scale subsidence if required
1319	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1320	large_scale_subsidence = .TRUE.
1321	CALL init_w_subsidence
1322	END IF
1323
1324
1325
1326	!
1327	!-- Compute Coriolis parameter
1328	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1329	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1330
1331	!
1332	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1333	!-- set the reference temperature equal to the surface temperature.
1334	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1335
1336	!
1337	!-- Reference value has to be used in buoyancy terms
1338	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1339
1340	!
1341	!-- Sign of buoyancy/stability terms
1342	IF ( ocean ) atmos_ocean_sign = -1.0
1343
1344	!
1345	!-- Ocean version must use flux boundary conditions at the top
1346	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1347	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1348	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1349	ENDIF
1350
1351	!
1352	!-- In case of a given slope, compute the relevant quantities
1353	IF ( alpha_surface /= 0.0 ) THEN
1354	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1355	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1356	' ) must be < 90.0'
1357	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1358	ENDIF
1359	sloping_surface = .TRUE.
1360	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1361	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1362	ENDIF
1363
1364	!
1365	!-- Check time step and cfl_factor
1366	IF ( dt /= -1.0 ) THEN
1367	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1368	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1369	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1370	ENDIF
1371	dt_3d = dt
1372	dt_fixed = .TRUE.
1373	ENDIF
1374
1375	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1376	IF ( cfl_factor == -1.0 ) THEN
1377	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1378	cfl_factor = 0.8
1379	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1380	cfl_factor = 0.9
1381	ELSE
1382	cfl_factor = 0.9
1383	ENDIF
1384	ELSE
1385	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1386	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1387	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1388	ENDIF
1389	ENDIF
1390
1391	!
1392	!-- Store simulated time at begin
1393	simulated_time_at_begin = simulated_time
1394
1395	!
1396	!-- Store reference time for coupled runs and change the coupling flag,
1397	!-- if ...
1398	IF ( simulated_time == 0.0 ) THEN
1399	IF ( coupling_start_time == 0.0 ) THEN
1400	time_since_reference_point = 0.0
1401	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1402	run_coupled = .FALSE.
1403	ENDIF
1404	ENDIF
1405
1406	!
1407	!-- Set wind speed in the Galilei-transformed system
1408	IF ( galilei_transformation ) THEN
1409	IF ( use_ug_for_galilei_tr .AND. &
1410	ug_vertical_gradient_level(1) == 0.0 .AND. &
1411	ug_vertical_gradient(1) == 0.0 .AND. &
1412	vg_vertical_gradient_level(1) == 0.0 .AND. &
1413	vg_vertical_gradient(1) == 0.0 ) THEN
1414	u_gtrans = ug_surface * 0.6
1415	v_gtrans = vg_surface * 0.6
1416	ELSEIF ( use_ug_for_galilei_tr .AND. &
1417	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1418	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1419	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1420	' with galilei transformation'
1421	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1422	ELSEIF ( use_ug_for_galilei_tr .AND. &
1423	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1424	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1425	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1426	' with galilei transformation'
1427	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1428	ELSE
1429	message_string = 'variable translation speed used for galilei-' // &
1430	'transformation, which may cause & instabilities in stably ' // &
1431	'stratified regions'
1432	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1433	ENDIF
1434	ENDIF
1435
1436	!
1437	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1438	!-- fluxes have to be used in the diffusion-terms
1439	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1440
1441	!
1442	!-- Check boundary conditions and set internal variables:
1443	!-- Lateral boundary conditions
1444	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1445	bc_lr /= 'radiation/dirichlet' ) THEN
1446	message_string = 'unknown boundary condition: bc_lr = "' // &
1447	TRIM( bc_lr ) // '"'
1448	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1449	ENDIF
1450	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1451	bc_ns /= 'radiation/dirichlet' ) THEN
1452	message_string = 'unknown boundary condition: bc_ns = "' // &
1453	TRIM( bc_ns ) // '"'
1454	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1455	ENDIF
1456
1457	!
1458	!-- Internal variables used for speed optimization in if clauses
1459	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1460	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1461	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1462	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1463	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1464	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1465
1466	!
1467	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1468	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1469	!-- and tools do not work with non-cyclic boundary conditions.
1470	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1471	IF ( psolver /= 'multigrid' ) THEN
1472	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1473	'psolver = "' // TRIM( psolver ) // '"'
1474	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1475	ENDIF
1476	IF ( momentum_advec /= 'pw-scheme' .AND. &
1477	momentum_advec /= 'ws-scheme') THEN
1478	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1479	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1480	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1481	ENDIF
1482	IF ( scalar_advec /= 'pw-scheme' .AND. &
1483	scalar_advec /= 'ws-scheme' ) THEN
1484	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1485	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1486	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1487	ENDIF
1488	IF ( galilei_transformation ) THEN
1489	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1490	'galilei_transformation = .T.'
1491	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1492	ENDIF
1493	ENDIF
1494
1495	!
1496	!-- Bottom boundary condition for the turbulent Kinetic energy
1497	IF ( bc_e_b == 'neumann' ) THEN
1498	ibc_e_b = 1
1499	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1500	ibc_e_b = 2
1501	IF ( prandtl_layer ) THEN
1502	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1503	TRIM( bc_e_b ) // '"'
1504	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1505	ENDIF
1506	IF ( .NOT. prandtl_layer ) THEN
1507	bc_e_b = 'neumann'
1508	ibc_e_b = 1
1509	message_string = 'boundary condition bc_e_b changed to "' // &
1510	TRIM( bc_e_b ) // '"'
1511	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1512	ENDIF
1513	ELSE
1514	message_string = 'unknown boundary condition: bc_e_b = "' // &
1515	TRIM( bc_e_b ) // '"'
1516	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1517	ENDIF
1518
1519	!
1520	!-- Boundary conditions for perturbation pressure
1521	IF ( bc_p_b == 'dirichlet' ) THEN
1522	ibc_p_b = 0
1523	ELSEIF ( bc_p_b == 'neumann' ) THEN
1524	ibc_p_b = 1
1525	ELSE
1526	message_string = 'unknown boundary condition: bc_p_b = "' // &
1527	TRIM( bc_p_b ) // '"'
1528	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1529	ENDIF
1530
1531	IF ( bc_p_t == 'dirichlet' ) THEN
1532	ibc_p_t = 0
1533	ELSEIF ( bc_p_t == 'neumann' ) THEN
1534	ibc_p_t = 1
1535	ELSE
1536	message_string = 'unknown boundary condition: bc_p_t = "' // &
1537	TRIM( bc_p_t ) // '"'
1538	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1539	ENDIF
1540
1541	!
1542	!-- Boundary conditions for potential temperature
1543	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1544	ibc_pt_b = 2
1545	ELSE
1546	IF ( bc_pt_b == 'dirichlet' ) THEN
1547	ibc_pt_b = 0
1548	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1549	ibc_pt_b = 1
1550	ELSE
1551	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1552	TRIM( bc_pt_b ) // '"'
1553	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1554	ENDIF
1555	ENDIF
1556
1557	IF ( bc_pt_t == 'dirichlet' ) THEN
1558	ibc_pt_t = 0
1559	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1560	ibc_pt_t = 1
1561	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1562	ibc_pt_t = 2
1563	ELSE
1564	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1565	TRIM( bc_pt_t ) // '"'
1566	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1567	ENDIF
1568
1569	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1570	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1571
1572	IF ( neutral ) THEN
1573
1574	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1575	THEN
1576	message_string = 'heatflux must not be set for pure neutral flow'
1577	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1578	ENDIF
1579
1580	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1581	THEN
1582	message_string = 'heatflux must not be set for pure neutral flow'
1583	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1584	ENDIF
1585
1586	ENDIF
1587
1588	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1589	top_momentumflux_v /= 9999999.9 ) THEN
1590	constant_top_momentumflux = .TRUE.
1591	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1592	top_momentumflux_v == 9999999.9 ) ) THEN
1593	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1594	'must be set'
1595	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1596	ENDIF
1597
1598	!
1599	!-- A given surface temperature implies Dirichlet boundary condition for
1600	!-- temperature. In this case specification of a constant heat flux is
1601	!-- forbidden.
1602	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1603	surface_heatflux /= 0.0 ) THEN
1604	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1605	'& is not allowed with constant_heatflux = .TRUE.'
1606	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1607	ENDIF
1608	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1609	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1610	'wed with pt_surface_initial_change (/=0) = ', &
1611	pt_surface_initial_change
1612	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1613	ENDIF
1614
1615	!
1616	!-- A given temperature at the top implies Dirichlet boundary condition for
1617	!-- temperature. In this case specification of a constant heat flux is
1618	!-- forbidden.
1619	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1620	top_heatflux /= 0.0 ) THEN
1621	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1622	'" is not allowed with constant_top_heatflux = .TRUE.'
1623	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1624	ENDIF
1625
1626	!
1627	!-- Boundary conditions for salinity
1628	IF ( ocean ) THEN
1629	IF ( bc_sa_t == 'dirichlet' ) THEN
1630	ibc_sa_t = 0
1631	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1632	ibc_sa_t = 1
1633	ELSE
1634	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1635	TRIM( bc_sa_t ) // '"'
1636	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1637	ENDIF
1638
1639	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1640	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1641	message_string = 'boundary condition: bc_sa_t = "' // &
1642	TRIM( bc_sa_t ) // '" requires to set ' // &
1643	'top_salinityflux'
1644	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1645	ENDIF
1646
1647	!
1648	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1649	!-- salinity. In this case specification of a constant salinity flux is
1650	!-- forbidden.
1651	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1652	top_salinityflux /= 0.0 ) THEN
1653	message_string = 'boundary condition: bc_sa_t = "' // &
1654	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1655	'constant_top_salinityflux = .TRUE.'
1656	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1657	ENDIF
1658
1659	ENDIF
1660
1661	!
1662	!-- In case of humidity or passive scalar, set boundary conditions for total
1663	!-- water content / scalar
1664	IF ( humidity .OR. passive_scalar ) THEN
1665	IF ( humidity ) THEN
1666	sq = 'q'
1667	ELSE
1668	sq = 's'
1669	ENDIF
1670	IF ( bc_q_b == 'dirichlet' ) THEN
1671	ibc_q_b = 0
1672	ELSEIF ( bc_q_b == 'neumann' ) THEN
1673	ibc_q_b = 1
1674	ELSE
1675	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1676	'_b ="' // TRIM( bc_q_b ) // '"'
1677	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1678	ENDIF
1679	IF ( bc_q_t == 'dirichlet' ) THEN
1680	ibc_q_t = 0
1681	ELSEIF ( bc_q_t == 'neumann' ) THEN
1682	ibc_q_t = 1
1683	ELSE
1684	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1685	'_t ="' // TRIM( bc_q_t ) // '"'
1686	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1687	ENDIF
1688
1689	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1690
1691	!
1692	!-- A given surface humidity implies Dirichlet boundary condition for
1693	!-- humidity. In this case specification of a constant water flux is
1694	!-- forbidden.
1695	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1696	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1697	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1698	'th prescribed surface flux'
1699	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1700	ENDIF
1701	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1702	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1703	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1704	q_surface_initial_change
1705	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1706	ENDIF
1707
1708	ENDIF
1709	!
1710	!-- Boundary conditions for horizontal components of wind speed
1711	IF ( bc_uv_b == 'dirichlet' ) THEN
1712	ibc_uv_b = 0
1713	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1714	ibc_uv_b = 1
1715	IF ( prandtl_layer ) THEN
1716	message_string = 'boundary condition: bc_uv_b = "' // &
1717	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1718	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1719	ENDIF
1720	ELSE
1721	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1722	TRIM( bc_uv_b ) // '"'
1723	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1724	ENDIF
1725	!
1726	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1727	!-- assigned with the u and v values of the ocean surface
1728	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1729	ibc_uv_b = 2
1730	ENDIF
1731
1732	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1733	bc_uv_t = 'neumann'
1734	ibc_uv_t = 1
1735	ELSE
1736	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1737	ibc_uv_t = 0
1738	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1739	!
1740	!-- Velocities for the initial u,v-profiles are set zero at the top
1741	!-- in case of dirichlet_0 conditions
1742	u_init(nzt+1) = 0.0
1743	v_init(nzt+1) = 0.0
1744	ENDIF
1745	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1746	ibc_uv_t = 1
1747	ELSE
1748	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1749	TRIM( bc_uv_t ) // '"'
1750	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1751	ENDIF
1752	ENDIF
1753
1754	!
1755	!-- Compute and check, respectively, the Rayleigh Damping parameter
1756	IF ( rayleigh_damping_factor == -1.0 ) THEN
1757	rayleigh_damping_factor = 0.0
1758	ELSE
1759	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1760	THEN
1761	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1762	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1763	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1764	ENDIF
1765	ENDIF
1766
1767	IF ( rayleigh_damping_height == -1.0 ) THEN
1768	IF ( .NOT. ocean ) THEN
1769	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1770	ELSE
1771	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1772	ENDIF
1773	ELSE
1774	IF ( .NOT. ocean ) THEN
1775	IF ( rayleigh_damping_height < 0.0 .OR. &
1776	rayleigh_damping_height > zu(nzt) ) THEN
1777	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1778	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1779	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1780	ENDIF
1781	ELSE
1782	IF ( rayleigh_damping_height > 0.0 .OR. &
1783	rayleigh_damping_height < zu(nzb) ) THEN
1784	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1785	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1786	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1787	ENDIF
1788	ENDIF
1789	ENDIF
1790
1791	!
1792	!-- Check number of chosen statistic regions. More than 10 regions are not
1793	!-- allowed, because so far no more than 10 corresponding output files can
1794	!-- be opened (cf. check_open)
1795	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1796	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1797	statistic_regions+1, ' but only 10 regions are allowed'
1798	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1799	ENDIF
1800	IF ( normalizing_region > statistic_regions .OR. &
1801	normalizing_region < 0) THEN
1802	WRITE ( message_string, * ) 'normalizing_region = ', &
1803	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1804	' (value of statistic_regions)'
1805	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1806	ENDIF
1807
1808	!
1809	!-- Check the interval for sorting particles.
1810	!-- Using particles as cloud droplets requires sorting after each timestep.
1811	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1812	dt_sort_particles = 0.0
1813	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1814	'_droplets = .TRUE.'
1815	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1816	ENDIF
1817
1818	!
1819	!-- Set the default intervals for data output, if necessary
1820	!-- NOTE: dt_dosp has already been set in package_parin
1821	IF ( dt_data_output /= 9999999.9 ) THEN
1822	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1823	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1824	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1825	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1826	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1827	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1828	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1829	DO mid = 1, max_masks
1830	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1831	ENDDO
1832	ENDIF
1833
1834	!
1835	!-- Set the default skip time intervals for data output, if necessary
1836	IF ( skip_time_dopr == 9999999.9 ) &
1837	skip_time_dopr = skip_time_data_output
1838	IF ( skip_time_dosp == 9999999.9 ) &
1839	skip_time_dosp = skip_time_data_output
1840	IF ( skip_time_do2d_xy == 9999999.9 ) &
1841	skip_time_do2d_xy = skip_time_data_output
1842	IF ( skip_time_do2d_xz == 9999999.9 ) &
1843	skip_time_do2d_xz = skip_time_data_output
1844	IF ( skip_time_do2d_yz == 9999999.9 ) &
1845	skip_time_do2d_yz = skip_time_data_output
1846	IF ( skip_time_do3d == 9999999.9 ) &
1847	skip_time_do3d = skip_time_data_output
1848	IF ( skip_time_data_output_av == 9999999.9 ) &
1849	skip_time_data_output_av = skip_time_data_output
1850	DO mid = 1, max_masks
1851	IF ( skip_time_domask(mid) == 9999999.9 ) &
1852	skip_time_domask(mid) = skip_time_data_output
1853	ENDDO
1854
1855	!
1856	!-- Check the average intervals (first for 3d-data, then for profiles and
1857	!-- spectra)
1858	IF ( averaging_interval > dt_data_output_av ) THEN
1859	WRITE( message_string, * ) 'averaging_interval = ', &
1860	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1861	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1862	ENDIF
1863
1864	IF ( averaging_interval_pr == 9999999.9 ) THEN
1865	averaging_interval_pr = averaging_interval
1866	ENDIF
1867
1868	IF ( averaging_interval_pr > dt_dopr ) THEN
1869	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1870	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1871	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1872	ENDIF
1873
1874	IF ( averaging_interval_sp == 9999999.9 ) THEN
1875	averaging_interval_sp = averaging_interval
1876	ENDIF
1877
1878	IF ( averaging_interval_sp > dt_dosp ) THEN
1879	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1880	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1881	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1882	ENDIF
1883
1884	!
1885	!-- Set the default interval for profiles entering the temporal average
1886	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1887	dt_averaging_input_pr = dt_averaging_input
1888	ENDIF
1889
1890	!
1891	!-- Set the default interval for the output of timeseries to a reasonable
1892	!-- value (tries to minimize the number of calls of flow_statistics)
1893	IF ( dt_dots == 9999999.9 ) THEN
1894	IF ( averaging_interval_pr == 0.0 ) THEN
1895	dt_dots = MIN( dt_run_control, dt_dopr )
1896	ELSE
1897	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1898	ENDIF
1899	ENDIF
1900
1901	!
1902	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1903	IF ( dt_averaging_input > averaging_interval ) THEN
1904	WRITE( message_string, * ) 'dt_averaging_input = ', &
1905	dt_averaging_input, ' must be <= averaging_interval = ', &
1906	averaging_interval
1907	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1908	ENDIF
1909
1910	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1911	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1912	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1913	averaging_interval_pr
1914	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1915	ENDIF
1916
1917	!
1918	!-- Set the default value for the integration interval of precipitation amount
1919	IF ( precipitation ) THEN
1920	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1921	precipitation_amount_interval = dt_do2d_xy
1922	ELSE
1923	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1924	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1925	precipitation_amount_interval, ' must not be larger than ', &
1926	'dt_do2d_xy = ', dt_do2d_xy
1927	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1928	ENDIF
1929	ENDIF
1930	ENDIF
1931
1932	!
1933	!-- Determine the number of output profiles and check whether they are
1934	!-- permissible
1935	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1936
1937	dopr_n = dopr_n + 1
1938	i = dopr_n
1939
1940	!
1941	!-- Determine internal profile number (for hom, homs)
1942	!-- and store height levels
1943	SELECT CASE ( TRIM( data_output_pr(i) ) )
1944
1945	CASE ( 'u', '#u' )
1946	dopr_index(i) = 1
1947	dopr_unit(i) = 'm/s'
1948	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1949	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1950	dopr_initial_index(i) = 5
1951	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1952	data_output_pr(i) = data_output_pr(i)(2:)
1953	ENDIF
1954
1955	CASE ( 'v', '#v' )
1956	dopr_index(i) = 2
1957	dopr_unit(i) = 'm/s'
1958	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1959	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1960	dopr_initial_index(i) = 6
1961	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1962	data_output_pr(i) = data_output_pr(i)(2:)
1963	ENDIF
1964
1965	CASE ( 'w' )
1966	dopr_index(i) = 3
1967	dopr_unit(i) = 'm/s'
1968	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1969
1970	CASE ( 'pt', '#pt' )
1971	IF ( .NOT. cloud_physics ) THEN
1972	dopr_index(i) = 4
1973	dopr_unit(i) = 'K'
1974	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1975	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1976	dopr_initial_index(i) = 7
1977	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1978	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1979	data_output_pr(i) = data_output_pr(i)(2:)
1980	ENDIF
1981	ELSE
1982	dopr_index(i) = 43
1983	dopr_unit(i) = 'K'
1984	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1985	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1986	dopr_initial_index(i) = 28
1987	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1988	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1989	data_output_pr(i) = data_output_pr(i)(2:)
1990	ENDIF
1991	ENDIF
1992
1993	CASE ( 'e' )
1994	dopr_index(i) = 8
1995	dopr_unit(i) = 'm2/s2'
1996	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1997	hom(nzb,2,8,:) = 0.0
1998
1999	CASE ( 'km', '#km' )
2000	dopr_index(i) = 9
2001	dopr_unit(i) = 'm2/s'
2002	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2003	hom(nzb,2,9,:) = 0.0
2004	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2005	dopr_initial_index(i) = 23
2006	hom(:,2,23,:) = hom(:,2,9,:)
2007	data_output_pr(i) = data_output_pr(i)(2:)
2008	ENDIF
2009
2010	CASE ( 'kh', '#kh' )
2011	dopr_index(i) = 10
2012	dopr_unit(i) = 'm2/s'
2013	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2014	hom(nzb,2,10,:) = 0.0
2015	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2016	dopr_initial_index(i) = 24
2017	hom(:,2,24,:) = hom(:,2,10,:)
2018	data_output_pr(i) = data_output_pr(i)(2:)
2019	ENDIF
2020
2021	CASE ( 'l', '#l' )
2022	dopr_index(i) = 11
2023	dopr_unit(i) = 'm'
2024	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2025	hom(nzb,2,11,:) = 0.0
2026	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2027	dopr_initial_index(i) = 25
2028	hom(:,2,25,:) = hom(:,2,11,:)
2029	data_output_pr(i) = data_output_pr(i)(2:)
2030	ENDIF
2031
2032	CASE ( 'w"u"' )
2033	dopr_index(i) = 12
2034	dopr_unit(i) = 'm2/s2'
2035	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2036	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2037
2038	CASE ( 'wu' )
2039	dopr_index(i) = 13
2040	dopr_unit(i) = 'm2/s2'
2041	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2042
2043	CASE ( 'w"v"' )
2044	dopr_index(i) = 14
2045	dopr_unit(i) = 'm2/s2'
2046	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2047	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2048
2049	CASE ( 'wv' )
2050	dopr_index(i) = 15
2051	dopr_unit(i) = 'm2/s2'
2052	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2053
2054	CASE ( 'w"pt"' )
2055	dopr_index(i) = 16
2056	dopr_unit(i) = 'K m/s'
2057	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2058
2059	CASE ( 'wpt' )
2060	dopr_index(i) = 17
2061	dopr_unit(i) = 'K m/s'
2062	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2063
2064	CASE ( 'wpt' )
2065	dopr_index(i) = 18
2066	dopr_unit(i) = 'K m/s'
2067	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2068
2069	CASE ( 'wu' )
2070	dopr_index(i) = 19
2071	dopr_unit(i) = 'm2/s2'
2072	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2073	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2074
2075	CASE ( 'wv' )
2076	dopr_index(i) = 20
2077	dopr_unit(i) = 'm2/s2'
2078	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2079	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2080
2081	CASE ( 'wptBC' )
2082	dopr_index(i) = 21
2083	dopr_unit(i) = 'K m/s'
2084	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2085
2086	CASE ( 'wptBC' )
2087	dopr_index(i) = 22
2088	dopr_unit(i) = 'K m/s'
2089	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2090
2091	CASE ( 'sa', '#sa' )
2092	IF ( .NOT. ocean ) THEN
2093	message_string = 'data_output_pr = ' // &
2094	TRIM( data_output_pr(i) ) // ' is not imp' // &
2095	'lemented for ocean = .FALSE.'
2096	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2097	ELSE
2098	dopr_index(i) = 23
2099	dopr_unit(i) = 'psu'
2100	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2101	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2102	dopr_initial_index(i) = 26
2103	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2104	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2105	data_output_pr(i) = data_output_pr(i)(2:)
2106	ENDIF
2107	ENDIF
2108
2109	CASE ( 'u*2' )
2110	dopr_index(i) = 30
2111	dopr_unit(i) = 'm2/s2'
2112	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2113
2114	CASE ( 'v*2' )
2115	dopr_index(i) = 31
2116	dopr_unit(i) = 'm2/s2'
2117	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2118
2119	CASE ( 'w*2' )
2120	dopr_index(i) = 32
2121	dopr_unit(i) = 'm2/s2'
2122	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2123
2124	CASE ( 'pt*2' )
2125	dopr_index(i) = 33
2126	dopr_unit(i) = 'K2'
2127	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2128
2129	CASE ( 'e*' )
2130	dopr_index(i) = 34
2131	dopr_unit(i) = 'm2/s2'
2132	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2133
2134	CASE ( 'w2pt' )
2135	dopr_index(i) = 35
2136	dopr_unit(i) = 'K m2/s2'
2137	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2138
2139	CASE ( 'wpt2' )
2140	dopr_index(i) = 36
2141	dopr_unit(i) = 'K2 m/s'
2142	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2143
2144	CASE ( 'we' )
2145	dopr_index(i) = 37
2146	dopr_unit(i) = 'm3/s3'
2147	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2148
2149	CASE ( 'w*3' )
2150	dopr_index(i) = 38
2151	dopr_unit(i) = 'm3/s3'
2152	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2153
2154	CASE ( 'Sw' )
2155	dopr_index(i) = 39
2156	dopr_unit(i) = 'none'
2157	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2158
2159	CASE ( 'p' )
2160	dopr_index(i) = 40
2161	dopr_unit(i) = 'Pa'
2162	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2163
2164	CASE ( 'q', '#q' )
2165	IF ( .NOT. humidity ) THEN
2166	message_string = 'data_output_pr = ' // &
2167	TRIM( data_output_pr(i) ) // ' is not imp' // &
2168	'lemented for humidity = .FALSE.'
2169	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2170	ELSE
2171	dopr_index(i) = 41
2172	dopr_unit(i) = 'kg/kg'
2173	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2174	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2175	dopr_initial_index(i) = 26
2176	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2177	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2178	data_output_pr(i) = data_output_pr(i)(2:)
2179	ENDIF
2180	ENDIF
2181
2182	CASE ( 's', '#s' )
2183	IF ( .NOT. passive_scalar ) THEN
2184	message_string = 'data_output_pr = ' // &
2185	TRIM( data_output_pr(i) ) // ' is not imp' // &
2186	'lemented for passive_scalar = .FALSE.'
2187	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2188	ELSE
2189	dopr_index(i) = 41
2190	dopr_unit(i) = 'kg/m3'
2191	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2192	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2193	dopr_initial_index(i) = 26
2194	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2195	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2196	data_output_pr(i) = data_output_pr(i)(2:)
2197	ENDIF
2198	ENDIF
2199
2200	CASE ( 'qv', '#qv' )
2201	IF ( .NOT. cloud_physics ) THEN
2202	dopr_index(i) = 41
2203	dopr_unit(i) = 'kg/kg'
2204	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2205	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2206	dopr_initial_index(i) = 26
2207	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2208	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2209	data_output_pr(i) = data_output_pr(i)(2:)
2210	ENDIF
2211	ELSE
2212	dopr_index(i) = 42
2213	dopr_unit(i) = 'kg/kg'
2214	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2215	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2216	dopr_initial_index(i) = 27
2217	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2218	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2219	data_output_pr(i) = data_output_pr(i)(2:)
2220	ENDIF
2221	ENDIF
2222
2223	CASE ( 'lpt', '#lpt' )
2224	IF ( .NOT. cloud_physics ) THEN
2225	message_string = 'data_output_pr = ' // &
2226	TRIM( data_output_pr(i) ) // ' is not imp' // &
2227	'lemented for cloud_physics = .FALSE.'
2228	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2229	ELSE
2230	dopr_index(i) = 4
2231	dopr_unit(i) = 'K'
2232	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2233	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2234	dopr_initial_index(i) = 7
2235	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2236	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2237	data_output_pr(i) = data_output_pr(i)(2:)
2238	ENDIF
2239	ENDIF
2240
2241	CASE ( 'vpt', '#vpt' )
2242	dopr_index(i) = 44
2243	dopr_unit(i) = 'K'
2244	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2245	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2246	dopr_initial_index(i) = 29
2247	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2248	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2249	data_output_pr(i) = data_output_pr(i)(2:)
2250	ENDIF
2251
2252	CASE ( 'w"vpt"' )
2253	dopr_index(i) = 45
2254	dopr_unit(i) = 'K m/s'
2255	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2256
2257	CASE ( 'wvpt' )
2258	dopr_index(i) = 46
2259	dopr_unit(i) = 'K m/s'
2260	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2261
2262	CASE ( 'wvpt' )
2263	dopr_index(i) = 47
2264	dopr_unit(i) = 'K m/s'
2265	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2266
2267	CASE ( 'w"q"' )
2268	IF ( .NOT. humidity ) THEN
2269	message_string = 'data_output_pr = ' // &
2270	TRIM( data_output_pr(i) ) // ' is not imp' // &
2271	'lemented for humidity = .FALSE.'
2272	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2273	ELSE
2274	dopr_index(i) = 48
2275	dopr_unit(i) = 'kg/kg m/s'
2276	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2277	ENDIF
2278
2279	CASE ( 'wq' )
2280	IF ( .NOT. humidity ) THEN
2281	message_string = 'data_output_pr = ' // &
2282	TRIM( data_output_pr(i) ) // ' is not imp' // &
2283	'lemented for humidity = .FALSE.'
2284	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2285	ELSE
2286	dopr_index(i) = 49
2287	dopr_unit(i) = 'kg/kg m/s'
2288	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2289	ENDIF
2290
2291	CASE ( 'wq' )
2292	IF ( .NOT. humidity ) THEN
2293	message_string = 'data_output_pr = ' // &
2294	TRIM( data_output_pr(i) ) // ' is not imp' // &
2295	'lemented for humidity = .FALSE.'
2296	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2297	ELSE
2298	dopr_index(i) = 50
2299	dopr_unit(i) = 'kg/kg m/s'
2300	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2301	ENDIF
2302
2303	CASE ( 'w"s"' )
2304	IF ( .NOT. passive_scalar ) THEN
2305	message_string = 'data_output_pr = ' // &
2306	TRIM( data_output_pr(i) ) // ' is not imp' // &
2307	'lemented for passive_scalar = .FALSE.'
2308	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2309	ELSE
2310	dopr_index(i) = 48
2311	dopr_unit(i) = 'kg/m3 m/s'
2312	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2313	ENDIF
2314
2315	CASE ( 'ws' )
2316	IF ( .NOT. passive_scalar ) THEN
2317	message_string = 'data_output_pr = ' // &
2318	TRIM( data_output_pr(i) ) // ' is not imp' // &
2319	'lemented for passive_scalar = .FALSE.'
2320	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2321	ELSE
2322	dopr_index(i) = 49
2323	dopr_unit(i) = 'kg/m3 m/s'
2324	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2325	ENDIF
2326
2327	CASE ( 'ws' )
2328	IF ( .NOT. passive_scalar ) THEN
2329	message_string = 'data_output_pr = ' // &
2330	TRIM( data_output_pr(i) ) // ' is not imp' // &
2331	'lemented for passive_scalar = .FALSE.'
2332	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2333	ELSE
2334	dopr_index(i) = 50
2335	dopr_unit(i) = 'kg/m3 m/s'
2336	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2337	ENDIF
2338
2339	CASE ( 'w"qv"' )
2340	IF ( humidity .AND. .NOT. cloud_physics ) &
2341	THEN
2342	dopr_index(i) = 48
2343	dopr_unit(i) = 'kg/kg m/s'
2344	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2345	ELSEIF( humidity .AND. cloud_physics ) THEN
2346	dopr_index(i) = 51
2347	dopr_unit(i) = 'kg/kg m/s'
2348	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2349	ELSE
2350	message_string = 'data_output_pr = ' // &
2351	TRIM( data_output_pr(i) ) // ' is not imp' // &
2352	'lemented for cloud_physics = .FALSE. an&' // &
2353	'd humidity = .FALSE.'
2354	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2355	ENDIF
2356
2357	CASE ( 'wqv' )
2358	IF ( humidity .AND. .NOT. cloud_physics ) &
2359	THEN
2360	dopr_index(i) = 49
2361	dopr_unit(i) = 'kg/kg m/s'
2362	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2363	ELSEIF( humidity .AND. cloud_physics ) THEN
2364	dopr_index(i) = 52
2365	dopr_unit(i) = 'kg/kg m/s'
2366	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2367	ELSE
2368	message_string = 'data_output_pr = ' // &
2369	TRIM( data_output_pr(i) ) // ' is not imp' // &
2370	'lemented for cloud_physics = .FALSE. an&' // &
2371	'd humidity = .FALSE.'
2372	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2373	ENDIF
2374
2375	CASE ( 'wqv' )
2376	IF ( humidity .AND. .NOT. cloud_physics ) &
2377	THEN
2378	dopr_index(i) = 50
2379	dopr_unit(i) = 'kg/kg m/s'
2380	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2381	ELSEIF( humidity .AND. cloud_physics ) THEN
2382	dopr_index(i) = 53
2383	dopr_unit(i) = 'kg/kg m/s'
2384	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2385	ELSE
2386	message_string = 'data_output_pr = ' // &
2387	TRIM( data_output_pr(i) ) // ' is not imp' // &
2388	'lemented for cloud_physics = .FALSE. an&' // &
2389	'd humidity = .FALSE.'
2390	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2391	ENDIF
2392
2393	CASE ( 'ql' )
2394	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2395	message_string = 'data_output_pr = ' // &
2396	TRIM( data_output_pr(i) ) // ' is not imp' // &
2397	'lemented for cloud_physics = .FALSE. or' // &
2398	'&cloud_droplets = .FALSE.'
2399	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2400	ELSE
2401	dopr_index(i) = 54
2402	dopr_unit(i) = 'kg/kg'
2403	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2404	ENDIF
2405
2406	CASE ( 'wuu*:dz' )
2407	dopr_index(i) = 55
2408	dopr_unit(i) = 'm2/s3'
2409	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2410
2411	CASE ( 'wp:dz' )
2412	dopr_index(i) = 56
2413	dopr_unit(i) = 'm2/s3'
2414	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2415
2416	CASE ( 'w"e:dz' )
2417	dopr_index(i) = 57
2418	dopr_unit(i) = 'm2/s3'
2419	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2420
2421
2422	CASE ( 'u"pt"' )
2423	dopr_index(i) = 58
2424	dopr_unit(i) = 'K m/s'
2425	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2426
2427	CASE ( 'upt' )
2428	dopr_index(i) = 59
2429	dopr_unit(i) = 'K m/s'
2430	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2431
2432	CASE ( 'upt_t' )
2433	dopr_index(i) = 60
2434	dopr_unit(i) = 'K m/s'
2435	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2436
2437	CASE ( 'v"pt"' )
2438	dopr_index(i) = 61
2439	dopr_unit(i) = 'K m/s'
2440	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2441
2442	CASE ( 'vpt' )
2443	dopr_index(i) = 62
2444	dopr_unit(i) = 'K m/s'
2445	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2446
2447	CASE ( 'vpt_t' )
2448	dopr_index(i) = 63
2449	dopr_unit(i) = 'K m/s'
2450	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2451
2452	CASE ( 'rho' )
2453	IF ( .NOT. ocean ) THEN
2454	message_string = 'data_output_pr = ' // &
2455	TRIM( data_output_pr(i) ) // ' is not imp' // &
2456	'lemented for ocean = .FALSE.'
2457	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2458	ELSE
2459	dopr_index(i) = 64
2460	dopr_unit(i) = 'kg/m3'
2461	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2462	ENDIF
2463
2464	CASE ( 'w"sa"' )
2465	IF ( .NOT. ocean ) THEN
2466	message_string = 'data_output_pr = ' // &
2467	TRIM( data_output_pr(i) ) // ' is not imp' // &
2468	'lemented for ocean = .FALSE.'
2469	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2470	ELSE
2471	dopr_index(i) = 65
2472	dopr_unit(i) = 'psu m/s'
2473	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2474	ENDIF
2475
2476	CASE ( 'wsa' )
2477	IF ( .NOT. ocean ) THEN
2478	message_string = 'data_output_pr = ' // &
2479	TRIM( data_output_pr(i) ) // ' is not imp' // &
2480	'lemented for ocean = .FALSE.'
2481	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2482	ELSE
2483	dopr_index(i) = 66
2484	dopr_unit(i) = 'psu m/s'
2485	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2486	ENDIF
2487
2488	CASE ( 'wsa' )
2489	IF ( .NOT. ocean ) THEN
2490	message_string = 'data_output_pr = ' // &
2491	TRIM( data_output_pr(i) ) // ' is not imp' // &
2492	'lemented for ocean = .FALSE.'
2493	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2494	ELSE
2495	dopr_index(i) = 67
2496	dopr_unit(i) = 'psu m/s'
2497	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2498	ENDIF
2499
2500	CASE ( 'wp' )
2501	dopr_index(i) = 68
2502	dopr_unit(i) = 'm3/s3'
2503	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2504
2505	CASE ( 'w"e' )
2506	dopr_index(i) = 69
2507	dopr_unit(i) = 'm3/s3'
2508	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2509
2510	CASE ( 'q*2' )
2511	IF ( .NOT. humidity ) THEN
2512	message_string = 'data_output_pr = ' // &
2513	TRIM( data_output_pr(i) ) // ' is not imp' // &
2514	'lemented for humidity = .FALSE.'
2515	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2516	ELSE
2517	dopr_index(i) = 70
2518	dopr_unit(i) = 'kg2/kg2'
2519	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2520	ENDIF
2521
2522	CASE ( 'prho' )
2523	IF ( .NOT. ocean ) THEN
2524	message_string = 'data_output_pr = ' // &
2525	TRIM( data_output_pr(i) ) // ' is not imp' // &
2526	'lemented for ocean = .FALSE.'
2527	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2528	ELSE
2529	dopr_index(i) = 71
2530	dopr_unit(i) = 'kg/m3'
2531	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2532	ENDIF
2533
2534	CASE ( 'hyp' )
2535	dopr_index(i) = 72
2536	dopr_unit(i) = 'dbar'
2537	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2538
2539	CASE ( 'nr' )
2540	IF ( .NOT. cloud_physics ) THEN
2541	message_string = 'data_output_pr = ' // &
2542	TRIM( data_output_pr(i) ) // ' is not imp' // &
2543	'lemented for cloud_physics = .FALSE.'
2544	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2545	ELSEIF ( icloud_scheme /= 0 ) THEN
2546	message_string = 'data_output_pr = ' // &
2547	TRIM( data_output_pr(i) ) // ' is not imp' // &
2548	'lemented for cloud_scheme /= seifert_beheng'
2549	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2550	ELSEIF ( .NOT. precipitation ) THEN
2551	message_string = 'data_output_pr = ' // &
2552	TRIM( data_output_pr(i) ) // ' is not imp' // &
2553	'lemented for precipitation = .FALSE.'
2554	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2555	ELSE
2556	dopr_index(i) = 73
2557	dopr_unit(i) = '1/m3'
2558	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2559	ENDIF
2560
2561	CASE ( 'qr' )
2562	IF ( .NOT. cloud_physics ) THEN
2563	message_string = 'data_output_pr = ' // &
2564	TRIM( data_output_pr(i) ) // ' is not imp' // &
2565	'lemented for cloud_physics = .FALSE.'
2566	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2567	ELSEIF ( icloud_scheme /= 0 ) THEN
2568	message_string = 'data_output_pr = ' // &
2569	TRIM( data_output_pr(i) ) // ' is not imp' // &
2570	'lemented for cloud_scheme /= seifert_beheng'
2571	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2572	ELSEIF ( .NOT. precipitation ) THEN
2573	message_string = 'data_output_pr = ' // &
2574	TRIM( data_output_pr(i) ) // ' is not imp' // &
2575	'lemented for precipitation = .FALSE.'
2576	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2577	ELSE
2578	dopr_index(i) = 74
2579	dopr_unit(i) = 'kg/kg'
2580	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2581	ENDIF
2582
2583	CASE ( 'qc' )
2584	IF ( .NOT. cloud_physics ) THEN
2585	message_string = 'data_output_pr = ' // &
2586	TRIM( data_output_pr(i) ) // ' is not imp' // &
2587	'lemented for cloud_physics = .FALSE.'
2588	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2589	ELSEIF ( icloud_scheme /= 0 ) THEN
2590	message_string = 'data_output_pr = ' // &
2591	TRIM( data_output_pr(i) ) // ' is not imp' // &
2592	'lemented for cloud_scheme /= seifert_beheng'
2593	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2594	ELSE
2595	dopr_index(i) = 75
2596	dopr_unit(i) = 'kg/kg'
2597	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2598	ENDIF
2599
2600	CASE ( 'prr' )
2601	IF ( .NOT. cloud_physics ) THEN
2602	message_string = 'data_output_pr = ' // &
2603	TRIM( data_output_pr(i) ) // ' is not imp' // &
2604	'lemented for cloud_physics = .FALSE.'
2605	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2606	ELSEIF ( icloud_scheme /= 0 ) THEN
2607	message_string = 'data_output_pr = ' // &
2608	TRIM( data_output_pr(i) ) // ' is not imp' // &
2609	'lemented for cloud_scheme /= seifert_beheng'
2610	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2611	ELSEIF ( .NOT. precipitation ) THEN
2612	message_string = 'data_output_pr = ' // &
2613	TRIM( data_output_pr(i) ) // ' is not imp' // &
2614	'lemented for precipitation = .FALSE.'
2615	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2616
2617	ELSE
2618	dopr_index(i) = 76
2619	dopr_unit(i) = 'kg/kg m/s'
2620	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2621	ENDIF
2622
2623	CASE DEFAULT
2624
2625	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2626
2627	IF ( unit == 'illegal' ) THEN
2628	IF ( data_output_pr_user(1) /= ' ' ) THEN
2629	message_string = 'illegal value for data_output_pr or ' // &
2630	'data_output_pr_user = "' // &
2631	TRIM( data_output_pr(i) ) // '"'
2632	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2633	ELSE
2634	message_string = 'illegal value for data_output_pr = "' // &
2635	TRIM( data_output_pr(i) ) // '"'
2636	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2637	ENDIF
2638	ENDIF
2639
2640	END SELECT
2641
2642	ENDDO
2643
2644
2645	!
2646	!-- Append user-defined data output variables to the standard data output
2647	IF ( data_output_user(1) /= ' ' ) THEN
2648	i = 1
2649	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2650	i = i + 1
2651	ENDDO
2652	j = 1
2653	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2654	IF ( i > 100 ) THEN
2655	message_string = 'number of output quantitities given by data' // &
2656	'_output and data_output_user exceeds the limit of 100'
2657	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2658	ENDIF
2659	data_output(i) = data_output_user(j)
2660	i = i + 1
2661	j = j + 1
2662	ENDDO
2663	ENDIF
2664
2665	!
2666	!-- Check and set steering parameters for 2d/3d data output and averaging
2667	i = 1
2668	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2669	!
2670	!-- Check for data averaging
2671	ilen = LEN_TRIM( data_output(i) )
2672	j = 0 ! no data averaging
2673	IF ( ilen > 3 ) THEN
2674	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2675	j = 1 ! data averaging
2676	data_output(i) = data_output(i)(1:ilen-3)
2677	ENDIF
2678	ENDIF
2679	!
2680	!-- Check for cross section or volume data
2681	ilen = LEN_TRIM( data_output(i) )
2682	k = 0 ! 3d data
2683	var = data_output(i)(1:ilen)
2684	IF ( ilen > 3 ) THEN
2685	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2686	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2687	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2688	k = 1 ! 2d data
2689	var = data_output(i)(1:ilen-3)
2690	ENDIF
2691	ENDIF
2692	!
2693	!-- Check for allowed value and set units
2694	SELECT CASE ( TRIM( var ) )
2695
2696	CASE ( 'e' )
2697	IF ( constant_diffusion ) THEN
2698	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2699	'res constant_diffusion = .FALSE.'
2700	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2701	ENDIF
2702	unit = 'm2/s2'
2703
2704	CASE ( 'lpt' )
2705	IF ( .NOT. cloud_physics ) THEN
2706	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2707	'res cloud_physics = .TRUE.'
2708	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2709	ENDIF
2710	unit = 'K'
2711
2712	CASE ( 'nr' )
2713	IF ( .NOT. cloud_physics ) THEN
2714	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2715	'res cloud_physics = .TRUE.'
2716	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2717	ELSEIF ( icloud_scheme /= 0 ) THEN
2718	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2719	'res cloud_scheme = seifert_beheng'
2720	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2721	ENDIF
2722	unit = '1/m3'
2723
2724	CASE ( 'pc', 'pr' )
2725	IF ( .NOT. particle_advection ) THEN
2726	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2727	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2728	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2729	ENDIF
2730	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2731	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2732
2733	CASE ( 'prr' )
2734	IF ( .NOT. cloud_physics ) THEN
2735	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2736	'res cloud_physics = .TRUE.'
2737	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2738	ELSEIF ( icloud_scheme /= 0 ) THEN
2739	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2740	'res cloud_scheme = seifert_beheng'
2741	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2742	ELSEIF ( .NOT. precipitation ) THEN
2743	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2744	'res precipitation = .TRUE.'
2745	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2746	ENDIF
2747	unit = 'kg/kg m/s'
2748
2749	CASE ( 'q', 'vpt' )
2750	IF ( .NOT. humidity ) THEN
2751	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2752	'res humidity = .TRUE.'
2753	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2754	ENDIF
2755	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2756	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2757
2758	CASE ( 'qc' )
2759	IF ( .NOT. cloud_physics ) THEN
2760	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2761	'res cloud_physics = .TRUE.'
2762	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2763	ELSEIF ( icloud_scheme /= 0 ) THEN
2764	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2765	'res cloud_scheme = seifert_beheng'
2766	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2767	ENDIF
2768	unit = 'kg/kg'
2769
2770	CASE ( 'ql' )
2771	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2772	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2773	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2774	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2775	ENDIF
2776	unit = 'kg/kg'
2777
2778	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2779	IF ( .NOT. cloud_droplets ) THEN
2780	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2781	'res cloud_droplets = .TRUE.'
2782	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2783	ENDIF
2784	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2785	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2786	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2787
2788	CASE ( 'qr' )
2789	IF ( .NOT. cloud_physics ) THEN
2790	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2791	'res cloud_physics = .TRUE.'
2792	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2793	ELSEIF ( icloud_scheme /= 0 ) THEN
2794	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2795	'res cloud_scheme = seifert_beheng'
2796	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2797	ELSEIF ( .NOT. precipitation ) THEN
2798	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2799	'res precipitation = .TRUE.'
2800	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2801	ENDIF
2802	unit = 'kg/kg'
2803
2804	CASE ( 'qv' )
2805	IF ( .NOT. cloud_physics ) THEN
2806	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2807	'res cloud_physics = .TRUE.'
2808	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2809	ENDIF
2810	unit = 'kg/kg'
2811
2812	CASE ( 'rho' )
2813	IF ( .NOT. ocean ) THEN
2814	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2815	'res ocean = .TRUE.'
2816	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2817	ENDIF
2818	unit = 'kg/m3'
2819
2820	CASE ( 's' )
2821	IF ( .NOT. passive_scalar ) THEN
2822	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2823	'res passive_scalar = .TRUE.'
2824	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2825	ENDIF
2826	unit = 'conc'
2827
2828	CASE ( 'sa' )
2829	IF ( .NOT. ocean ) THEN
2830	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2831	'res ocean = .TRUE.'
2832	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2833	ENDIF
2834	unit = 'psu'
2835
2836	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2837	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2838	message_string = 'illegal value for data_output: "' // &
2839	TRIM( var ) // '" & only 2d-horizontal ' // &
2840	'cross sections are allowed for this value'
2841	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2842	ENDIF
2843	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2844	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2845	'res cloud_physics = .TRUE.'
2846	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2847	ENDIF
2848	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2849	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2850	'res precipitation = .TRUE.'
2851	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2852	ENDIF
2853	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2854	message_string = 'temporal averaging of precipitation ' // &
2855	'amount "' // TRIM( var ) // '" is not possible'
2856	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2857	ENDIF
2858	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2859	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2860	'res precipitation = .TRUE.'
2861	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2862	ENDIF
2863	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2864	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2865	'res humidity = .TRUE.'
2866	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2867	ENDIF
2868
2869	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2870	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2871	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2872	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2873	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2874	IF ( TRIM( var ) == 't*' ) unit = 'K'
2875	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2876	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2877	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2878
2879
2880	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2881	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2882	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2883	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2884	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2885	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2886	CONTINUE
2887
2888	CASE DEFAULT
2889	CALL user_check_data_output( var, unit )
2890
2891	IF ( unit == 'illegal' ) THEN
2892	IF ( data_output_user(1) /= ' ' ) THEN
2893	message_string = 'illegal value for data_output or ' // &
2894	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2895	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2896	ELSE
2897	message_string = 'illegal value for data_output =' // &
2898	TRIM( data_output(i) ) // '"'
2899	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2900	ENDIF
2901	ENDIF
2902
2903	END SELECT
2904	!
2905	!-- Set the internal steering parameters appropriately
2906	IF ( k == 0 ) THEN
2907	do3d_no(j) = do3d_no(j) + 1
2908	do3d(j,do3d_no(j)) = data_output(i)
2909	do3d_unit(j,do3d_no(j)) = unit
2910	ELSE
2911	do2d_no(j) = do2d_no(j) + 1
2912	do2d(j,do2d_no(j)) = data_output(i)
2913	do2d_unit(j,do2d_no(j)) = unit
2914	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2915	data_output_xy(j) = .TRUE.
2916	ENDIF
2917	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2918	data_output_xz(j) = .TRUE.
2919	ENDIF
2920	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2921	data_output_yz(j) = .TRUE.
2922	ENDIF
2923	ENDIF
2924
2925	IF ( j == 1 ) THEN
2926	!
2927	!-- Check, if variable is already subject to averaging
2928	found = .FALSE.
2929	DO k = 1, doav_n
2930	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2931	ENDDO
2932
2933	IF ( .NOT. found ) THEN
2934	doav_n = doav_n + 1
2935	doav(doav_n) = var
2936	ENDIF
2937	ENDIF
2938
2939	i = i + 1
2940	ENDDO
2941
2942	!
2943	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2944	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2945	WRITE( message_string, * ) 'output of averaged quantity "', &
2946	TRIM( doav(1) ), '_av" requires to set a ', &
2947	'non-zero & averaging interval'
2948	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2949	ENDIF
2950
2951	!
2952	!-- Check sectional planes and store them in one shared array
2953	IF ( ANY( section_xy > nz + 1 ) ) THEN
2954	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2955	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2956	ENDIF
2957	IF ( ANY( section_xz > ny + 1 ) ) THEN
2958	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2959	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2960	ENDIF
2961	IF ( ANY( section_yz > nx + 1 ) ) THEN
2962	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2963	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2964	ENDIF
2965	section(:,1) = section_xy
2966	section(:,2) = section_xz
2967	section(:,3) = section_yz
2968
2969	!
2970	!-- Upper plot limit for 2D vertical sections
2971	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2972	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2973	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2974	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2975	' (zu(nzt))'
2976	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2977	ENDIF
2978
2979	!
2980	!-- Upper plot limit for 3D arrays
2981	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2982
2983	!
2984	!-- Determine and check accuracy for compressed 3D plot output
2985	IF ( do3d_compress ) THEN
2986	!
2987	!-- Compression only permissible on T3E machines
2988	IF ( host(1:3) /= 't3e' ) THEN
2989	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2990	TRIM( host ) // '"'
2991	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2992	ENDIF
2993
2994	i = 1
2995	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2996
2997	ilen = LEN_TRIM( do3d_comp_prec(i) )
2998	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2999	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3000	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3001	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3002	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3003	ENDIF
3004
3005	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3006	var = do3d_comp_prec(i)(1:ilen-1)
3007
3008	SELECT CASE ( var )
3009
3010	CASE ( 'u' )
3011	j = 1
3012	CASE ( 'v' )
3013	j = 2
3014	CASE ( 'w' )
3015	j = 3
3016	CASE ( 'p' )
3017	j = 4
3018	CASE ( 'pt' )
3019	j = 5
3020
3021	CASE DEFAULT
3022	WRITE( message_string, * ) 'unknown variable "', &
3023	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3024	i, ')'
3025	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3026
3027	END SELECT
3028
3029	plot_3d_precision(j)%precision = prec
3030	i = i + 1
3031
3032	ENDDO
3033	ENDIF
3034
3035	!
3036	!-- Check the data output format(s)
3037	IF ( data_output_format(1) == ' ' ) THEN
3038	!
3039	!-- Default value
3040	netcdf_output = .TRUE.
3041	ELSE
3042	i = 1
3043	DO WHILE ( data_output_format(i) /= ' ' )
3044
3045	SELECT CASE ( data_output_format(i) )
3046
3047	CASE ( 'netcdf' )
3048	netcdf_output = .TRUE.
3049	CASE ( 'iso2d' )
3050	iso2d_output = .TRUE.
3051	CASE ( 'avs' )
3052	avs_output = .TRUE.
3053
3054	CASE DEFAULT
3055	message_string = 'unknown value for data_output_format "' // &
3056	TRIM( data_output_format(i) ) // '"'
3057	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3058
3059	END SELECT
3060
3061	i = i + 1
3062	IF ( i > 10 ) EXIT
3063
3064	ENDDO
3065	ENDIF
3066
3067	!
3068	!-- Set output format string (used in header)
3069	IF ( netcdf_output ) THEN
3070
3071	SELECT CASE ( netcdf_data_format )
3072	CASE ( 1 )
3073	output_format_netcdf = 'netCDF classic'
3074	CASE ( 2 )
3075	output_format_netcdf = 'netCDF 64bit offset'
3076	CASE ( 3 )
3077	output_format_netcdf = 'netCDF4/HDF5'
3078	CASE ( 4 )
3079	output_format_netcdf = 'netCDF4/HDF5 classic'
3080	CASE ( 5 )
3081	output_format_netcdf = 'parallel netCDF4/HDF5'
3082	CASE ( 6 )
3083	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3084
3085	END SELECT
3086
3087	ENDIF
3088
3089	!
3090	!-- Check mask conditions
3091	DO mid = 1, max_masks
3092	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3093	data_output_masks_user(mid,1) /= ' ' ) THEN
3094	masks = masks + 1
3095	ENDIF
3096	ENDDO
3097
3098	IF ( masks < 0 .OR. masks > max_masks ) THEN
3099	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3100	'<= ', max_masks, ' (=max_masks)'
3101	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3102	ENDIF
3103	IF ( masks > 0 ) THEN
3104	mask_scale(1) = mask_scale_x
3105	mask_scale(2) = mask_scale_y
3106	mask_scale(3) = mask_scale_z
3107	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3108	WRITE( message_string, * ) &
3109	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3110	'must be > 0.0'
3111	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3112	ENDIF
3113	!
3114	!-- Generate masks for masked data output
3115	CALL init_masks
3116	ENDIF
3117
3118	!
3119	!-- Check the NetCDF data format
3120	#if ! defined ( __check )
3121	IF ( netcdf_data_format > 2 ) THEN
3122	#if defined( __netcdf4 )
3123	CONTINUE
3124	#else
3125	message_string = 'netCDF: netCDF4 format requested but no ' // &
3126	'cpp-directive __netcdf4 given & switch ' // &
3127	'back to 64-bit offset format'
3128	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3129	netcdf_data_format = 2
3130	#endif
3131	ENDIF
3132	IF ( netcdf_data_format > 4 ) THEN
3133	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3134	CONTINUE
3135	#else
3136	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3137	'cpp-directive __netcdf4_parallel given & switch ' // &
3138	'back to netCDF4 non-parallel output'
3139	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3140	netcdf_data_format = netcdf_data_format - 2
3141	#endif
3142	ENDIF
3143	#endif
3144
3145	#if ! defined( __check )
3146	!
3147	!-- Check netcdf precison
3148	ldum = .FALSE.
3149	CALL define_netcdf_header( 'ch', ldum, 0 )
3150	#endif
3151	!
3152	!-- Check, whether a constant diffusion coefficient shall be used
3153	IF ( km_constant /= -1.0 ) THEN
3154	IF ( km_constant < 0.0 ) THEN
3155	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3156	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3157	ELSE
3158	IF ( prandtl_number < 0.0 ) THEN
3159	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3160	' < 0.0'
3161	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3162	ENDIF
3163	constant_diffusion = .TRUE.
3164
3165	IF ( prandtl_layer ) THEN
3166	message_string = 'prandtl_layer is not allowed with fixed ' // &
3167	'value of km'
3168	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3169	ENDIF
3170	ENDIF
3171	ENDIF
3172
3173	!
3174	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3175	!-- potential temperature, check the width of the damping layer
3176	IF ( bc_lr /= 'cyclic' ) THEN
3177	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3178	message_string = 'pt_damping_width out of range'
3179	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3180	ENDIF
3181	ENDIF
3182
3183	IF ( bc_ns /= 'cyclic' ) THEN
3184	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3185	message_string = 'pt_damping_width out of range'
3186	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3187	ENDIF
3188	ENDIF
3189
3190	!
3191	!-- Check value range for rif
3192	IF ( rif_min >= rif_max ) THEN
3193	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3194	'than rif_max = ', rif_max
3195	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3196	ENDIF
3197
3198	!
3199	!-- Determine upper and lower hight level indices for random perturbations
3200	IF ( disturbance_level_b == -9999999.9 ) THEN
3201	IF ( ocean ) THEN
3202	disturbance_level_b = zu((nzt*2)/3)
3203	disturbance_level_ind_b = ( nzt * 2 ) / 3
3204	ELSE
3205	disturbance_level_b = zu(nzb+3)
3206	disturbance_level_ind_b = nzb + 3
3207	ENDIF
3208	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3209	WRITE( message_string, * ) 'disturbance_level_b = ', &
3210	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3211	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3212	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3213	WRITE( message_string, * ) 'disturbance_level_b = ', &
3214	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3215	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3216	ELSE
3217	DO k = 3, nzt-2
3218	IF ( disturbance_level_b <= zu(k) ) THEN
3219	disturbance_level_ind_b = k
3220	EXIT
3221	ENDIF
3222	ENDDO
3223	ENDIF
3224
3225	IF ( disturbance_level_t == -9999999.9 ) THEN
3226	IF ( ocean ) THEN
3227	disturbance_level_t = zu(nzt-3)
3228	disturbance_level_ind_t = nzt - 3
3229	ELSE
3230	disturbance_level_t = zu(nzt/3)
3231	disturbance_level_ind_t = nzt / 3
3232	ENDIF
3233	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3234	WRITE( message_string, * ) 'disturbance_level_t = ', &
3235	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3236	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3237	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3238	WRITE( message_string, * ) 'disturbance_level_t = ', &
3239	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3240	disturbance_level_b
3241	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3242	ELSE
3243	DO k = 3, nzt-2
3244	IF ( disturbance_level_t <= zu(k) ) THEN
3245	disturbance_level_ind_t = k
3246	EXIT
3247	ENDIF
3248	ENDDO
3249	ENDIF
3250
3251	!
3252	!-- Check again whether the levels determined this way are ok.
3253	!-- Error may occur at automatic determination and too few grid points in
3254	!-- z-direction.
3255	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3256	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3257	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3258	disturbance_level_b
3259	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3260	ENDIF
3261
3262	!
3263	!-- Determine the horizontal index range for random perturbations.
3264	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3265	!-- near the inflow and the perturbation area is further limited to ...(1)
3266	!-- after the initial phase of the flow.
3267	dist_nxl = 0; dist_nxr = nx
3268	dist_nys = 0; dist_nyn = ny
3269	IF ( bc_lr /= 'cyclic' ) THEN
3270	IF ( inflow_disturbance_begin == -1 ) THEN
3271	inflow_disturbance_begin = MIN( 10, nx/2 )
3272	ENDIF
3273	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3274	THEN
3275	message_string = 'inflow_disturbance_begin out of range'
3276	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3277	ENDIF
3278	IF ( inflow_disturbance_end == -1 ) THEN
3279	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3280	ENDIF
3281	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3282	THEN
3283	message_string = 'inflow_disturbance_end out of range'
3284	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3285	ENDIF
3286	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3287	IF ( inflow_disturbance_begin == -1 ) THEN
3288	inflow_disturbance_begin = MIN( 10, ny/2 )
3289	ENDIF
3290	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3291	THEN
3292	message_string = 'inflow_disturbance_begin out of range'
3293	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3294	ENDIF
3295	IF ( inflow_disturbance_end == -1 ) THEN
3296	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3297	ENDIF
3298	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3299	THEN
3300	message_string = 'inflow_disturbance_end out of range'
3301	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3302	ENDIF
3303	ENDIF
3304
3305	IF ( bc_lr == 'radiation/dirichlet' ) THEN
3306	dist_nxr = nx - inflow_disturbance_begin
3307	dist_nxl(1) = nx - inflow_disturbance_end
3308	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
3309	dist_nxl = inflow_disturbance_begin
3310	dist_nxr(1) = inflow_disturbance_end
3311	ENDIF
3312	IF ( bc_ns == 'dirichlet/radiation' ) THEN
3313	dist_nyn = ny - inflow_disturbance_begin
3314	dist_nys(1) = ny - inflow_disturbance_end
3315	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
3316	dist_nys = inflow_disturbance_begin
3317	dist_nyn(1) = inflow_disturbance_end
3318	ENDIF
3319
3320	!
3321	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3322	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3323	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
3324	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3325	'condition at the inflow boundary'
3326	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3327	ENDIF
3328
3329	!
3330	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3331	!-- data from prerun in the first main run
3332	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
3333	initializing_actions /= 'read_restart_data' ) THEN
3334	message_string = 'turbulent_inflow = .T. requires ' // &
3335	'initializing_actions = ''cyclic_fill'' '
3336	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3337	ENDIF
3338
3339	!
3340	!-- In case of turbulent inflow calculate the index of the recycling plane
3341	IF ( turbulent_inflow ) THEN
3342	IF ( recycling_width == 9999999.9 ) THEN
3343	!
3344	!-- Set the default value for the width of the recycling domain
3345	recycling_width = 0.1 * nx * dx
3346	ELSE
3347	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3348	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3349	' ', recycling_width
3350	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3351	ENDIF
3352	ENDIF
3353	!
3354	!-- Calculate the index
3355	recycling_plane = recycling_width / dx
3356	ENDIF
3357
3358	!
3359	!-- Check random generator
3360	IF ( random_generator /= 'system-specific' .AND. &
3361	random_generator /= 'numerical-recipes' ) THEN
3362	message_string = 'unknown random generator: random_generator = "' // &
3363	TRIM( random_generator ) // '"'
3364	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3365	ENDIF
3366
3367	!
3368	!-- Determine damping level index for 1D model
3369	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3370	IF ( damp_level_1d == -1.0 ) THEN
3371	damp_level_1d = zu(nzt+1)
3372	damp_level_ind_1d = nzt + 1
3373	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3374	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3375	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3376	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3377	ELSE
3378	DO k = 1, nzt+1
3379	IF ( damp_level_1d <= zu(k) ) THEN
3380	damp_level_ind_1d = k
3381	EXIT
3382	ENDIF
3383	ENDDO
3384	ENDIF
3385	ENDIF
3386
3387	!
3388	!-- Check some other 1d-model parameters
3389	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3390	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3391	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3392	'" is unknown'
3393	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3394	ENDIF
3395	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3396	TRIM( dissipation_1d ) /= 'detering' ) THEN
3397	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3398	'" is unknown'
3399	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3400	ENDIF
3401
3402	!
3403	!-- Set time for the next user defined restart (time_restart is the
3404	!-- internal parameter for steering restart events)
3405	IF ( restart_time /= 9999999.9 ) THEN
3406	IF ( restart_time > time_since_reference_point ) THEN
3407	time_restart = restart_time
3408	ENDIF
3409	ELSE
3410	!
3411	!-- In case of a restart run, set internal parameter to default (no restart)
3412	!-- if the NAMELIST-parameter restart_time is omitted
3413	time_restart = 9999999.9
3414	ENDIF
3415
3416	!
3417	!-- Set default value of the time needed to terminate a model run
3418	IF ( termination_time_needed == -1.0 ) THEN
3419	IF ( host(1:3) == 'ibm' ) THEN
3420	termination_time_needed = 300.0
3421	ELSE
3422	termination_time_needed = 35.0
3423	ENDIF
3424	ENDIF
3425
3426	!
3427	!-- Check the time needed to terminate a model run
3428	IF ( host(1:3) == 't3e' ) THEN
3429	!
3430	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3431	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3432	IF ( termination_time_needed <= 30.0 ) THEN
3433	WRITE( message_string, * ) 'termination_time_needed = ', &
3434	termination_time_needed, ' must be > 30.0 on host "', &
3435	TRIM( host ), '"'
3436	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3437	ENDIF
3438	ELSEIF ( host(1:3) == 'ibm' ) THEN
3439	!
3440	!-- On IBM-regatta machines the time should be at least 300 seconds,
3441	!-- because the job time consumed before executing palm (for compiling,
3442	!-- copying of files, etc.) has to be regarded
3443	IF ( termination_time_needed < 300.0 ) THEN
3444	WRITE( message_string, * ) 'termination_time_needed = ', &
3445	termination_time_needed, ' should be >= 300.0 on host "', &
3446	TRIM( host ), '"'
3447	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3448	ENDIF
3449	ENDIF
3450
3451	!
3452	!-- Check pressure gradient conditions
3453	IF ( dp_external .AND. conserve_volume_flow ) THEN
3454	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3455	'w are .TRUE. but one of them must be .FALSE.'
3456	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3457	ENDIF
3458	IF ( dp_external ) THEN
3459	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3460	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3461	' of range'
3462	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3463	ENDIF
3464	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3465	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3466	'ro, i.e. the external pressure gradient & will not be applied'
3467	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3468	ENDIF
3469	ENDIF
3470	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3471	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3472	'.FALSE., i.e. the external pressure gradient & will not be applied'
3473	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3474	ENDIF
3475	IF ( conserve_volume_flow ) THEN
3476	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3477
3478	conserve_volume_flow_mode = 'initial_profiles'
3479
3480	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3481	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3482	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3483	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3484	conserve_volume_flow_mode
3485	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3486	ENDIF
3487	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3488	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3489	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3490	'require conserve_volume_flow_mode = ''initial_profiles'''
3491	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3492	ENDIF
3493	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3494	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3495	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3496	'require conserve_volume_flow_mode = ''initial_profiles''', &
3497	' or ''bulk_velocity'''
3498	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3499	ENDIF
3500	ENDIF
3501	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3502	( .NOT. conserve_volume_flow .OR. &
3503	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3504	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3505	'conserve_volume_flow = .T. and ', &
3506	'conserve_volume_flow_mode = ''bulk_velocity'''
3507	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3508	ENDIF
3509
3510	!
3511	!-- Check particle attributes
3512	IF ( particle_color /= 'none' ) THEN
3513	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3514	particle_color /= 'z' ) THEN
3515	message_string = 'illegal value for parameter particle_color: ' // &
3516	TRIM( particle_color)
3517	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3518	ELSE
3519	IF ( color_interval(2) <= color_interval(1) ) THEN
3520	message_string = 'color_interval(2) <= color_interval(1)'
3521	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3522	ENDIF
3523	ENDIF
3524	ENDIF
3525
3526	IF ( particle_dvrpsize /= 'none' ) THEN
3527	IF ( particle_dvrpsize /= 'absw' ) THEN
3528	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3529	' ' // TRIM( particle_color)
3530	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3531	ELSE
3532	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3533	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3534	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3535	ENDIF
3536	ENDIF
3537	ENDIF
3538
3539	!
3540	!-- Check &userpar parameters
3541	CALL user_check_parameters
3542
3543
3544
3545	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |