Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1096

Last change on this file since 1096 was 1093, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 142.6 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1093 2013-02-02 12:58:49Z raasch $
27	!
28	! 1092 2013-02-02 11:24:22Z raasch
29	! unused variables removed
30	!
31	! 1069 2012-11-28 16:18:43Z maronga
32	! allow usage of topography in combination with cloud physics
33	!
34	! 1065 2012-11-22 17:42:36Z hoffmann
35	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
36	! precipitation in order to save computational resources.
37	!
38	! 1060 2012-11-21 07:19:51Z raasch
39	! additional check for parameter turbulent_inflow
40	!
41	! 1053 2012-11-13 17:11:03Z hoffmann
42	! necessary changes for the new two-moment cloud physics scheme added:
43	! - check cloud physics scheme (Kessler or Seifert and Beheng)
44	! - plant_canopy is not allowed
45	! - currently, only cache loop_optimization is allowed
46	! - initial profiles of nr, qr
47	! - boundary condition of nr, qr
48	! - check output quantities (qr, nr, prr)
49	!
50	! 1036 2012-10-22 13:43:42Z raasch
51	! code put under GPL (PALM 3.9)
52	!
53	! 1031/1034 2012-10-22 11:32:49Z raasch
54	! check of netcdf4 parallel file support
55	!
56	! 1019 2012-09-28 06:46:45Z raasch
57	! non-optimized version of prognostic_equations not allowed any more
58	!
59	! 1015 2012-09-27 09:23:24Z raasch
60	! acc allowed for loop optimization,
61	! checks for adjustment of mixing length to the Prandtl mixing length removed
62	!
63	! 1003 2012-09-14 14:35:53Z raasch
64	! checks for cases with unequal subdomain sizes removed
65	!
66	! 1001 2012-09-13 14:08:46Z raasch
67	! all actions concerning leapfrog- and upstream-spline-scheme removed
68	!
69	! 996 2012-09-07 10:41:47Z raasch
70	! little reformatting
71
72	! 978 2012-08-09 08:28:32Z fricke
73	! setting of bc_lr/ns_dirneu/neudir
74	! outflow damping layer removed
75	! check for z0h*
76	! check for pt_damping_width
77	!
78	! 964 2012-07-26 09:14:24Z raasch
79	! check of old profil-parameters removed
80	!
81	! 940 2012-07-09 14:31:00Z raasch
82	! checks for parameter neutral
83	!
84	! 924 2012-06-06 07:44:41Z maronga
85	! Bugfix: preprocessor directives caused error during compilation
86	!
87	! 892 2012-05-02 13:51:44Z maronga
88	! Bugfix for parameter file check ( excluding __netcdf4 )
89	!
90	! 866 2012-03-28 06:44:41Z raasch
91	! use only 60% of the geostrophic wind as translation speed in case of Galilean
92	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
93	! timestep
94	!
95	! 861 2012-03-26 14:18:34Z suehring
96	! Check for topography and ws-scheme removed.
97	! Check for loop_optimization = 'vector' and ws-scheme removed.
98	!
99	! 845 2012-03-07 10:23:05Z maronga
100	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
101	!
102	! 828 2012-02-21 12:00:36Z raasch
103	! check of collision_kernel extended
104	!
105	! 825 2012-02-19 03:03:44Z raasch
106	! check for collision_kernel and curvature_solution_effects
107	!
108	! 809 2012-01-30 13:32:58Z maronga
109	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
110	!
111	! 807 2012-01-25 11:53:51Z maronga
112	! New cpp directive "__check" implemented which is used by check_namelist_files
113	!
114	! 774 2011-10-27 13:34:16Z letzel
115	! bugfix for prescribed u,v-profiles
116	!
117	! 767 2011-10-14 06:39:12Z raasch
118	! Calculating u,v-profiles from given profiles by linear interpolation.
119	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
120	!
121	! 707 2011-03-29 11:39:40Z raasch
122	! setting of bc_lr/ns_dirrad/raddir
123	!
124	! 689 2011-02-20 19:31:12z gryschka
125	! Bugfix for some logical expressions
126	! (syntax was not compatible with all compilers)
127	!
128	! 680 2011-02-04 23:16:06Z gryschka
129	! init_vortex is not allowed with volume_flow_control
130	!
131	! 673 2011-01-18 16:19:48Z suehring
132	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
133	!
134	! 667 2010-12-23 12:06:00Z suehring/gryschka
135	! Exchange of parameters between ocean and atmosphere via PE0
136	! Check for illegal combination of ws-scheme and timestep scheme.
137	! Check for topography and ws-scheme.
138	! Check for not cyclic boundary conditions in combination with ws-scheme and
139	! loop_optimization = 'vector'.
140	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
141	! Different processor/grid topology in atmosphere and ocean is now allowed!
142	! Bugfixes in checking for conserve_volume_flow_mode
143	! 600 2010-11-24 16:10:51Z raasch
144	! change due to new default value of surface_waterflux
145	! 580 2010-10-05 13:59:11Z heinze
146	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
147	!
148	! 567 2010-10-01 10:46:30Z helmke
149	! calculating masks changed
150	!
151	! 564 2010-09-30 13:18:59Z helmke
152	! palm message identifiers of masked output changed, 20 replaced by max_masks
153	!
154	! 553 2010-09-01 14:09:06Z weinreis
155	! masks is calculated and removed from inipar
156	!
157	! 531 2010-04-21 06:47:21Z heinze
158	! Bugfix: unit of hyp changed to dbar
159	!
160	! 524 2010-03-30 02:04:51Z raasch
161	! Bugfix: "/" in netcdf profile variable names replaced by ":"
162	!
163	! 493 2010-03-01 08:30:24Z raasch
164	! netcdf_data_format is checked
165	!
166	! 411 2009-12-11 14:15:58Z heinze
167	! Enabled passive scalar/humidity wall fluxes for non-flat topography
168	! Initialization of large scale vertical motion (subsidence/ascent)
169	!
170	! 410 2009-12-04 17:05:40Z letzel
171	! masked data output
172	!
173	! 388 2009-09-23 09:40:33Z raasch
174	! Check profiles fpr prho and hyp.
175	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
176	! interval has been set, respective error message is included
177	! bc_lr_cyc and bc_ns_cyc are set,
178	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
179	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
180	! Coupling with independent precursor runs.
181	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
182	! Bugfix: pressure included for profile output
183	! Check pressure gradient conditions
184	! topography_grid_convention moved from user_check_parameters
185	! 'single_street_canyon'
186	! Added shf* and qsws* to the list of available output data
187	!
188	! 222 2009-01-12 16:04:16Z letzel
189	! +user_check_parameters
190	! Output of messages replaced by message handling routine.
191	! Implementation of an MPI-1 coupling: replaced myid with target_id,
192	! deleted __mpi2 directives
193	! Check that PALM is called with mrun -K parallel for coupling
194	!
195	! 197 2008-09-16 15:29:03Z raasch
196	! Bug fix: Construction of vertical profiles when 10 gradients have been
197	! specified in the parameter list (ug, vg, pt, q, sa, lad)
198	!
199	! Strict grid matching along z is not needed for mg-solver.
200	! Leaf area density (LAD) explicitly set to its surface value at k=0
201	! Case of reading data for recycling included in initializing_actions,
202	! check of turbulent_inflow and calculation of recycling_plane.
203	! q*2 profile added
204	!
205	! 138 2007-11-28 10:03:58Z letzel
206	! Plant canopy added
207	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
208	! Multigrid solver allows topography, checking of dt_sort_particles
209	! Bugfix: initializing u_init and v_init in case of ocean runs
210	!
211	! 109 2007-08-28 15:26:47Z letzel
212	! Check coupling_mode and set default (obligatory) values (like boundary
213	! conditions for temperature and fluxes) in case of coupled runs.
214	! +profiles for wp and w"e
215	! Bugfix: Error message concerning output of particle concentration (pc)
216	! modified
217	! More checks and more default values for coupled runs
218	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
219	! cloud_physics = .T.)
220	! Rayleigh damping for ocean fixed.
221	! Check and, if necessary, set default value for dt_coupling
222	!
223	! 97 2007-06-21 08:23:15Z raasch
224	! Initial salinity profile is calculated, salinity boundary conditions are
225	! checked,
226	! z_max_do1d is checked only in case of ocean = .f.,
227	! +initial temperature and geostrophic velocity profiles for the ocean version,
228	! use_pt_reference renamed use_reference
229	!
230	! 89 2007-05-25 12:08:31Z raasch
231	! Check for user-defined profiles
232	!
233	! 75 2007-03-22 09:54:05Z raasch
234	! "by_user" allowed as initializing action, -data_output_ts,
235	! leapfrog with non-flat topography not allowed any more, loop_optimization
236	! and pt_reference are checked, moisture renamed humidity,
237	! output of precipitation amount/rate and roughnes length + check
238	! possible negative humidities are avoided in initial profile,
239	! dirichlet/neumann changed to dirichlet/radiation, etc.,
240	! revision added to run_description_header
241	!
242	! 20 2007-02-26 00:12:32Z raasch
243	! Temperature and humidity gradients at top are now calculated for nzt+1,
244	! top_heatflux and respective boundary condition bc_pt_t is checked
245	!
246	! RCS Log replace by Id keyword, revision history cleaned up
247	!
248	! Revision 1.61 2006/08/04 14:20:25 raasch
249	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
250	! use_upstream_for_tke, default value for dt_dopts,
251	! generation of file header moved from routines palm and header to here
252	!
253	! Revision 1.1 1997/08/26 06:29:23 raasch
254	! Initial revision
255	!
256	!
257	! Description:
258	! ------------
259	! Check control parameters and deduce further quantities.
260	!------------------------------------------------------------------------------!
261
262	USE arrays_3d
263	USE cloud_parameters
264	USE constants
265	USE control_parameters
266	USE dvrp_variables
267	USE grid_variables
268	USE indices
269	USE model_1d
270	USE netcdf_control
271	USE particle_attributes
272	USE pegrid
273	USE profil_parameter
274	USE subsidence_mod
275	USE statistics
276	USE transpose_indices
277
278	IMPLICIT NONE
279
280	CHARACTER (LEN=1) :: sq
281	CHARACTER (LEN=6) :: var
282	CHARACTER (LEN=7) :: unit
283	CHARACTER (LEN=8) :: date
284	CHARACTER (LEN=10) :: time
285	CHARACTER (LEN=40) :: coupling_string
286	CHARACTER (LEN=100) :: action
287
288	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
289	LOGICAL :: found, ldum
290	REAL :: gradient, remote = 0.0, simulation_time_since_reference
291
292	!
293	!-- Warning, if host is not set
294	IF ( host(1:1) == ' ' ) THEN
295	message_string = '"host" is not set. Please check that environment ' // &
296	'variable "localhost" & is set before running PALM'
297	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
298	ENDIF
299
300	!
301	!-- Check the coupling mode
302	IF ( coupling_mode /= 'uncoupled' .AND. &
303	coupling_mode /= 'atmosphere_to_ocean' .AND. &
304	coupling_mode /= 'ocean_to_atmosphere' ) THEN
305	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
306	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
307	ENDIF
308
309	!
310	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
311	IF ( coupling_mode /= 'uncoupled') THEN
312
313	IF ( dt_coupling == 9999999.9 ) THEN
314	message_string = 'dt_coupling is not set but required for coup' // &
315	'ling mode "' // TRIM( coupling_mode ) // '"'
316	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
317	ENDIF
318
319	#if defined( __parallel )
320
321	!
322	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
323	!-- program.
324	!-- check_namelist_files will need the following information of the other
325	!-- model (atmosphere/ocean).
326	! dt_coupling = remote
327	! dt_max = remote
328	! restart_time = remote
329	! dt_restart= remote
330	! simulation_time_since_reference = remote
331	! dx = remote
332
333
334	#if ! defined( __check )
335	IF ( myid == 0 ) THEN
336	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
337	ierr )
338	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
339	status, ierr )
340	ENDIF
341	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
342	#endif
343	IF ( dt_coupling /= remote ) THEN
344	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
345	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
346	'dt_coupling_remote = ', remote
347	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
348	ENDIF
349	IF ( dt_coupling <= 0.0 ) THEN
350	#if ! defined( __check )
351	IF ( myid == 0 ) THEN
352	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
353	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
354	status, ierr )
355	ENDIF
356	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
357	#endif
358	dt_coupling = MAX( dt_max, remote )
359	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
360	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
361	'MAX(dt_max(A,O)) = ', dt_coupling
362	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
363	ENDIF
364	#if ! defined( __check )
365	IF ( myid == 0 ) THEN
366	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
367	ierr )
368	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
369	status, ierr )
370	ENDIF
371	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
372	#endif
373	IF ( restart_time /= remote ) THEN
374	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
375	'": restart_time = ', restart_time, '& is not equal to ', &
376	'restart_time_remote = ', remote
377	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
378	ENDIF
379	#if ! defined( __check )
380	IF ( myid == 0 ) THEN
381	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
382	ierr )
383	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
384	status, ierr )
385	ENDIF
386	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
387	#endif
388	IF ( dt_restart /= remote ) THEN
389	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
390	'": dt_restart = ', dt_restart, '& is not equal to ', &
391	'dt_restart_remote = ', remote
392	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
393	ENDIF
394
395	simulation_time_since_reference = end_time - coupling_start_time
396	#if ! defined( __check )
397	IF ( myid == 0 ) THEN
398	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
399	14, comm_inter, ierr )
400	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
401	status, ierr )
402	ENDIF
403	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
404	#endif
405	IF ( simulation_time_since_reference /= remote ) THEN
406	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
407	'": simulation_time_since_reference = ', &
408	simulation_time_since_reference, '& is not equal to ', &
409	'simulation_time_since_reference_remote = ', remote
410	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
411	ENDIF
412
413	#if ! defined( __check )
414	IF ( myid == 0 ) THEN
415	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
416	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
417	status, ierr )
418	ENDIF
419	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
420
421	#endif
422	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
423
424	IF ( dx < remote ) THEN
425	WRITE( message_string, * ) 'coupling mode "', &
426	TRIM( coupling_mode ), &
427	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
428	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
429	ENDIF
430
431	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
432	WRITE( message_string, * ) 'coupling mode "', &
433	TRIM( coupling_mode ), &
434	'": Domain size in x-direction is not equal in ocean and atmosphere'
435	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
436	ENDIF
437
438	ENDIF
439
440	#if ! defined( __check )
441	IF ( myid == 0) THEN
442	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
443	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
444	status, ierr )
445	ENDIF
446	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
447	#endif
448	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
449
450	IF ( dy < remote ) THEN
451	WRITE( message_string, * ) 'coupling mode "', &
452	TRIM( coupling_mode ), &
453	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
454	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
455	ENDIF
456
457	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
458	WRITE( message_string, * ) 'coupling mode "', &
459	TRIM( coupling_mode ), &
460	'": Domain size in y-direction is not equal in ocean and atmosphere'
461	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
462	ENDIF
463
464	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
465	WRITE( message_string, * ) 'coupling mode "', &
466	TRIM( coupling_mode ), &
467	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
468	' atmosphere'
469	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
470	ENDIF
471
472	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
473	WRITE( message_string, * ) 'coupling mode "', &
474	TRIM( coupling_mode ), &
475	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
476	' atmosphere'
477	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
478	ENDIF
479
480	ENDIF
481	#else
482	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
483	' ''mrun -K parallel'''
484	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
485	#endif
486	ENDIF
487
488	#if defined( __parallel ) && ! defined ( __check )
489	!
490	!-- Exchange via intercommunicator
491	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
492	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
493	ierr )
494	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
495	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
496	comm_inter, status, ierr )
497	ENDIF
498	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
499
500	#endif
501
502
503	!
504	!-- Generate the file header which is used as a header for most of PALM's
505	!-- output files
506	CALL DATE_AND_TIME( date, time )
507	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
508	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
509	IF ( coupling_mode == 'uncoupled' ) THEN
510	coupling_string = ''
511	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
512	coupling_string = ' coupled (atmosphere)'
513	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
514	coupling_string = ' coupled (ocean)'
515	ENDIF
516
517	WRITE ( run_description_header, &
518	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
519	TRIM( version ), TRIM( revision ), 'run: ', &
520	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
521	'host: ', TRIM( host ), run_date, run_time
522
523	!
524	!-- Check the general loop optimization method
525	IF ( loop_optimization == 'default' ) THEN
526	IF ( host(1:3) == 'nec' ) THEN
527	loop_optimization = 'vector'
528	ELSE
529	loop_optimization = 'cache'
530	ENDIF
531	ENDIF
532
533	SELECT CASE ( TRIM( loop_optimization ) )
534
535	CASE ( 'acc', 'cache', 'vector' )
536	CONTINUE
537
538	CASE DEFAULT
539	message_string = 'illegal value given for loop_optimization: "' // &
540	TRIM( loop_optimization ) // '"'
541	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
542
543	END SELECT
544
545	!
546	!-- Check topography setting (check for illegal parameter combinations)
547	IF ( topography /= 'flat' ) THEN
548	action = ' '
549	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
550	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
551	ENDIF
552	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
553	THEN
554	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
555	ENDIF
556	IF ( psolver == 'sor' ) THEN
557	WRITE( action, '(A,A)' ) 'psolver = ', psolver
558	ENDIF
559	IF ( sloping_surface ) THEN
560	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
561	ENDIF
562	IF ( galilei_transformation ) THEN
563	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
564	ENDIF
565	IF ( cloud_droplets ) THEN
566	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE. (has not been tested)'
567	ENDIF
568	IF ( .NOT. prandtl_layer ) THEN
569	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
570	ENDIF
571	IF ( action /= ' ' ) THEN
572	message_string = 'a non-flat topography does not allow ' // &
573	TRIM( action )
574	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
575	ENDIF
576	!
577	!-- In case of non-flat topography, check whether the convention how to
578	!-- define the topography grid has been set correctly, or whether the default
579	!-- is applicable. If this is not possible, abort.
580	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
581	IF ( TRIM( topography ) /= 'single_building' .AND. &
582	TRIM( topography ) /= 'single_street_canyon' .AND. &
583	TRIM( topography ) /= 'read_from_file' ) THEN
584	!-- The default value is not applicable here, because it is only valid
585	!-- for the two standard cases 'single_building' and 'read_from_file'
586	!-- defined in init_grid.
587	WRITE( message_string, * ) &
588	'The value for "topography_grid_convention" ', &
589	'is not set. Its default value is & only valid for ', &
590	'"topography" = ''single_building'', ', &
591	'''single_street_canyon'' & or ''read_from_file''.', &
592	' & Choose ''cell_edge'' or ''cell_center''.'
593	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
594	ELSE
595	!-- The default value is applicable here.
596	!-- Set convention according to topography.
597	IF ( TRIM( topography ) == 'single_building' .OR. &
598	TRIM( topography ) == 'single_street_canyon' ) THEN
599	topography_grid_convention = 'cell_edge'
600	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
601	topography_grid_convention = 'cell_center'
602	ENDIF
603	ENDIF
604	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
605	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
606	WRITE( message_string, * ) &
607	'The value for "topography_grid_convention" is ', &
608	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
609	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
610	ENDIF
611
612	ENDIF
613
614	!
615	!-- Check ocean setting
616	IF ( ocean ) THEN
617
618	action = ' '
619	IF ( action /= ' ' ) THEN
620	message_string = 'ocean = .T. does not allow ' // TRIM( action )
621	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
622	ENDIF
623
624	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
625	TRIM( coupling_char ) == '_O' ) THEN
626
627	!
628	!-- Check whether an (uncoupled) atmospheric run has been declared as an
629	!-- ocean run (this setting is done via mrun-option -y)
630
631	message_string = 'ocean = .F. does not allow coupling_char = "' // &
632	TRIM( coupling_char ) // '" set by mrun-option "-y"'
633	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
634
635	ENDIF
636	!
637	!-- Check cloud scheme
638	IF ( cloud_scheme == 'seifert_beheng' ) THEN
639	icloud_scheme = 0
640	ELSEIF ( cloud_scheme == 'kessler' ) THEN
641	icloud_scheme = 1
642	ELSE
643	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
644	TRIM( cloud_scheme ) // '"'
645	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
646	ENDIF
647	!
648	!-- Check whether there are any illegal values
649	!-- Pressure solver:
650	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
651	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
652	message_string = 'unknown solver for perturbation pressure: psolver' // &
653	' = "' // TRIM( psolver ) // '"'
654	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
655	ENDIF
656
657	#if defined( __parallel )
658	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
659	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
660	'for a 1d domain-decomposition along x & please do' // &
661	' not set npey/=1 in the parameter file'
662	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
663	ENDIF
664	#else
665	IF ( psolver == 'poisfft_hybrid' ) THEN
666	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
667	' for a parallel environment'
668	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
669	ENDIF
670	#endif
671
672	IF ( psolver == 'multigrid' ) THEN
673	IF ( cycle_mg == 'w' ) THEN
674	gamma_mg = 2
675	ELSEIF ( cycle_mg == 'v' ) THEN
676	gamma_mg = 1
677	ELSE
678	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
679	TRIM( cycle_mg ) // '"'
680	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
681	ENDIF
682	ENDIF
683
684	IF ( fft_method /= 'singleton-algorithm' .AND. &
685	fft_method /= 'temperton-algorithm' .AND. &
686	fft_method /= 'system-specific' ) THEN
687	message_string = 'unknown fft-algorithm: fft_method = "' // &
688	TRIM( fft_method ) // '"'
689	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
690	ENDIF
691
692	IF( momentum_advec == 'ws-scheme' .AND. &
693	.NOT. call_psolver_at_all_substeps ) THEN
694	message_string = 'psolver must be called at each RK3 substep when "'//&
695	TRIM(momentum_advec) // ' "is used for momentum_advec'
696	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
697	END IF
698	!
699	!-- Advection schemes:
700	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
701	THEN
702	message_string = 'unknown advection scheme: momentum_advec = "' // &
703	TRIM( momentum_advec ) // '"'
704	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
705	ENDIF
706	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
707	.AND. ( timestep_scheme == 'euler' .OR. &
708	timestep_scheme == 'runge-kutta-2' ) ) &
709	THEN
710	message_string = 'momentum_advec or scalar_advec = "' &
711	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
712	TRIM( timestep_scheme ) // '"'
713	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
714	ENDIF
715	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
716	scalar_advec /= 'bc-scheme' ) &
717	THEN
718	message_string = 'unknown advection scheme: scalar_advec = "' // &
719	TRIM( scalar_advec ) // '"'
720	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
721	ENDIF
722	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
723	THEN
724	message_string = 'advection_scheme scalar_advec = "' &
725	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
726	TRIM( loop_optimization ) // '"'
727	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
728	ENDIF
729
730	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
731	use_upstream_for_tke = .TRUE.
732	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
733	'use_sgs_for_particles = .TRUE.'
734	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
735	ENDIF
736
737	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
738	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
739	'curvature_solution_effects = .TRUE.'
740	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
741	ENDIF
742
743	!
744	!-- Set LOGICAL switches to enhance performance
745	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
746	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
747
748	!
749	!-- Timestep schemes:
750	SELECT CASE ( TRIM( timestep_scheme ) )
751
752	CASE ( 'euler' )
753	intermediate_timestep_count_max = 1
754
755	CASE ( 'runge-kutta-2' )
756	intermediate_timestep_count_max = 2
757
758	CASE ( 'runge-kutta-3' )
759	intermediate_timestep_count_max = 3
760
761	CASE DEFAULT
762	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
763	TRIM( timestep_scheme ) // '"'
764	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
765
766	END SELECT
767
768	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
769	.AND. timestep_scheme(1:5) == 'runge' ) THEN
770	message_string = 'momentum advection scheme "' // &
771	TRIM( momentum_advec ) // '" & does not work with ' // &
772	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
773	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
774	ENDIF
775
776	!
777	!-- Collision kernels:
778	SELECT CASE ( TRIM( collision_kernel ) )
779
780	CASE ( 'hall', 'hall_fast' )
781	hall_kernel = .TRUE.
782
783	CASE ( 'palm' )
784	palm_kernel = .TRUE.
785
786	CASE ( 'wang', 'wang_fast' )
787	wang_kernel = .TRUE.
788
789	CASE ( 'none' )
790
791
792	CASE DEFAULT
793	message_string = 'unknown collision kernel: collision_kernel = "' // &
794	TRIM( collision_kernel ) // '"'
795	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
796
797	END SELECT
798	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
799
800	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
801	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
802	!
803	!-- No restart run: several initialising actions are possible
804	action = initializing_actions
805	DO WHILE ( TRIM( action ) /= '' )
806	position = INDEX( action, ' ' )
807	SELECT CASE ( action(1:position-1) )
808
809	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
810	'by_user', 'initialize_vortex', 'initialize_ptanom' )
811	action = action(position+1:)
812
813	CASE DEFAULT
814	message_string = 'initializing_action = "' // &
815	TRIM( action ) // '" unkown or not allowed'
816	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
817
818	END SELECT
819	ENDDO
820	ENDIF
821
822	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
823	conserve_volume_flow ) THEN
824	message_string = 'initializing_actions = "initialize_vortex"' // &
825	' ist not allowed with conserve_volume_flow = .T.'
826	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
827	ENDIF
828
829
830	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
831	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
832	message_string = 'initializing_actions = "set_constant_profiles"' // &
833	' and "set_1d-model_profiles" are not allowed ' // &
834	'simultaneously'
835	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
836	ENDIF
837
838	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
839	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
840	message_string = 'initializing_actions = "set_constant_profiles"' // &
841	' and "by_user" are not allowed simultaneously'
842	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
843	ENDIF
844
845	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
846	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
847	message_string = 'initializing_actions = "by_user" and ' // &
848	'"set_1d-model_profiles" are not allowed simultaneously'
849	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
850	ENDIF
851
852	IF ( cloud_physics .AND. .NOT. humidity ) THEN
853	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
854	'not allowed with humidity = ', humidity
855	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
856	ENDIF
857
858	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
859	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
860	'not allowed with cloud_physics = ', cloud_physics
861	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
862	ENDIF
863
864	IF ( humidity .AND. sloping_surface ) THEN
865	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
866	'are not allowed simultaneously'
867	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
868	ENDIF
869
870	IF ( passive_scalar .AND. humidity ) THEN
871	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
872	'is not allowed simultaneously'
873	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
874	ENDIF
875
876	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
877	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
878	'coefficient & given value is drag_coefficient = 0.0'
879	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
880	ENDIF
881
882	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
883	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
884	' seifert_beheng'
885	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
886	ENDIF
887
888	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
889	icloud_scheme == 0 ) THEN
890	message_string = 'cloud_scheme = seifert_beheng requires ' // &
891	'loop_optimization = cache'
892	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
893	ENDIF
894
895	IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
896	.NOT. precipitation ) THEN
897	message_string = 'cloud_scheme = seifert_beheng requires ' // &
898	'precipitation = .TRUE.'
899	CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
900	ENDIF
901
902	!
903	!-- In case of no model continuation run, check initialising parameters and
904	!-- deduce further quantities
905	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
906
907	!
908	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
909	pt_init = pt_surface
910	IF ( humidity ) THEN
911	q_init = q_surface
912	!
913	!-- It is not allowed to choose initial profiles of rain water content
914	!-- and rain drop concentration. They are set to 0.0.
915	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
916	qr_init = 0.0
917	nr_init = 0.0
918	ENDIF
919	ENDIF
920	IF ( ocean ) sa_init = sa_surface
921	IF ( passive_scalar ) q_init = s_surface
922	IF ( plant_canopy ) lad = 0.0
923
924	!
925	!--
926	!-- If required, compute initial profile of the geostrophic wind
927	!-- (component ug)
928	i = 1
929	gradient = 0.0
930
931	IF ( .NOT. ocean ) THEN
932
933	ug_vertical_gradient_level_ind(1) = 0
934	ug(0) = ug_surface
935	DO k = 1, nzt+1
936	IF ( i < 11 ) THEN
937	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
938	ug_vertical_gradient_level(i) >= 0.0 ) THEN
939	gradient = ug_vertical_gradient(i) / 100.0
940	ug_vertical_gradient_level_ind(i) = k - 1
941	i = i + 1
942	ENDIF
943	ENDIF
944	IF ( gradient /= 0.0 ) THEN
945	IF ( k /= 1 ) THEN
946	ug(k) = ug(k-1) + dzu(k) * gradient
947	ELSE
948	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
949	ENDIF
950	ELSE
951	ug(k) = ug(k-1)
952	ENDIF
953	ENDDO
954
955	ELSE
956
957	ug_vertical_gradient_level_ind(1) = nzt+1
958	ug(nzt+1) = ug_surface
959	DO k = nzt, nzb, -1
960	IF ( i < 11 ) THEN
961	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
962	ug_vertical_gradient_level(i) <= 0.0 ) THEN
963	gradient = ug_vertical_gradient(i) / 100.0
964	ug_vertical_gradient_level_ind(i) = k + 1
965	i = i + 1
966	ENDIF
967	ENDIF
968	IF ( gradient /= 0.0 ) THEN
969	IF ( k /= nzt ) THEN
970	ug(k) = ug(k+1) - dzu(k+1) * gradient
971	ELSE
972	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
973	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
974	ENDIF
975	ELSE
976	ug(k) = ug(k+1)
977	ENDIF
978	ENDDO
979
980	ENDIF
981
982	!
983	!-- In case of no given gradients for ug, choose a zero gradient
984	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
985	ug_vertical_gradient_level(1) = 0.0
986	ENDIF
987
988	!
989	!--
990	!-- If required, compute initial profile of the geostrophic wind
991	!-- (component vg)
992	i = 1
993	gradient = 0.0
994
995	IF ( .NOT. ocean ) THEN
996
997	vg_vertical_gradient_level_ind(1) = 0
998	vg(0) = vg_surface
999	DO k = 1, nzt+1
1000	IF ( i < 11 ) THEN
1001	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
1002	vg_vertical_gradient_level(i) >= 0.0 ) THEN
1003	gradient = vg_vertical_gradient(i) / 100.0
1004	vg_vertical_gradient_level_ind(i) = k - 1
1005	i = i + 1
1006	ENDIF
1007	ENDIF
1008	IF ( gradient /= 0.0 ) THEN
1009	IF ( k /= 1 ) THEN
1010	vg(k) = vg(k-1) + dzu(k) * gradient
1011	ELSE
1012	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
1013	ENDIF
1014	ELSE
1015	vg(k) = vg(k-1)
1016	ENDIF
1017	ENDDO
1018
1019	ELSE
1020
1021	vg_vertical_gradient_level_ind(1) = nzt+1
1022	vg(nzt+1) = vg_surface
1023	DO k = nzt, nzb, -1
1024	IF ( i < 11 ) THEN
1025	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1026	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1027	gradient = vg_vertical_gradient(i) / 100.0
1028	vg_vertical_gradient_level_ind(i) = k + 1
1029	i = i + 1
1030	ENDIF
1031	ENDIF
1032	IF ( gradient /= 0.0 ) THEN
1033	IF ( k /= nzt ) THEN
1034	vg(k) = vg(k+1) - dzu(k+1) * gradient
1035	ELSE
1036	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1037	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1038	ENDIF
1039	ELSE
1040	vg(k) = vg(k+1)
1041	ENDIF
1042	ENDDO
1043
1044	ENDIF
1045
1046	!
1047	!-- In case of no given gradients for vg, choose a zero gradient
1048	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1049	vg_vertical_gradient_level(1) = 0.0
1050	ENDIF
1051
1052	!
1053	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1054	!-- interpolate them from wind profile data (if given)
1055	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1056
1057	u_init = ug
1058	v_init = vg
1059
1060	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1061
1062	IF ( uv_heights(1) /= 0.0 ) THEN
1063	message_string = 'uv_heights(1) must be 0.0'
1064	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1065	ENDIF
1066
1067	use_prescribed_profile_data = .TRUE.
1068
1069	kk = 1
1070	u_init(0) = 0.0
1071	v_init(0) = 0.0
1072
1073	DO k = 1, nz+1
1074
1075	IF ( kk < 100 ) THEN
1076	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1077	kk = kk + 1
1078	IF ( kk == 100 ) EXIT
1079	ENDDO
1080	ENDIF
1081
1082	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1083	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1084	( uv_heights(kk+1) - uv_heights(kk) ) * &
1085	( u_profile(kk+1) - u_profile(kk) )
1086	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1087	( uv_heights(kk+1) - uv_heights(kk) ) * &
1088	( v_profile(kk+1) - v_profile(kk) )
1089	ELSE
1090	u_init(k) = u_profile(kk)
1091	v_init(k) = v_profile(kk)
1092	ENDIF
1093
1094	ENDDO
1095
1096	ELSE
1097
1098	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1099	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1100
1101	ENDIF
1102
1103	!
1104	!-- Compute initial temperature profile using the given temperature gradients
1105	IF ( .NOT. neutral ) THEN
1106
1107	i = 1
1108	gradient = 0.0
1109
1110	IF ( .NOT. ocean ) THEN
1111
1112	pt_vertical_gradient_level_ind(1) = 0
1113	DO k = 1, nzt+1
1114	IF ( i < 11 ) THEN
1115	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1116	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1117	gradient = pt_vertical_gradient(i) / 100.0
1118	pt_vertical_gradient_level_ind(i) = k - 1
1119	i = i + 1
1120	ENDIF
1121	ENDIF
1122	IF ( gradient /= 0.0 ) THEN
1123	IF ( k /= 1 ) THEN
1124	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1125	ELSE
1126	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
1127	ENDIF
1128	ELSE
1129	pt_init(k) = pt_init(k-1)
1130	ENDIF
1131	ENDDO
1132
1133	ELSE
1134
1135	pt_vertical_gradient_level_ind(1) = nzt+1
1136	DO k = nzt, 0, -1
1137	IF ( i < 11 ) THEN
1138	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1139	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1140	gradient = pt_vertical_gradient(i) / 100.0
1141	pt_vertical_gradient_level_ind(i) = k + 1
1142	i = i + 1
1143	ENDIF
1144	ENDIF
1145	IF ( gradient /= 0.0 ) THEN
1146	IF ( k /= nzt ) THEN
1147	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1148	ELSE
1149	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1150	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1151	ENDIF
1152	ELSE
1153	pt_init(k) = pt_init(k+1)
1154	ENDIF
1155	ENDDO
1156
1157	ENDIF
1158
1159	ENDIF
1160
1161	!
1162	!-- In case of no given temperature gradients, choose gradient of neutral
1163	!-- stratification
1164	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1165	pt_vertical_gradient_level(1) = 0.0
1166	ENDIF
1167
1168	!
1169	!-- Store temperature gradient at the top boundary for possible Neumann
1170	!-- boundary condition
1171	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1172
1173	!
1174	!-- If required, compute initial humidity or scalar profile using the given
1175	!-- humidity/scalar gradient. In case of scalar transport, initially store
1176	!-- values of the scalar parameters on humidity parameters
1177	IF ( passive_scalar ) THEN
1178	bc_q_b = bc_s_b
1179	bc_q_t = bc_s_t
1180	q_surface = s_surface
1181	q_surface_initial_change = s_surface_initial_change
1182	q_vertical_gradient = s_vertical_gradient
1183	q_vertical_gradient_level = s_vertical_gradient_level
1184	surface_waterflux = surface_scalarflux
1185	wall_humidityflux = wall_scalarflux
1186	ENDIF
1187
1188	IF ( humidity .OR. passive_scalar ) THEN
1189
1190	i = 1
1191	gradient = 0.0
1192	q_vertical_gradient_level_ind(1) = 0
1193	DO k = 1, nzt+1
1194	IF ( i < 11 ) THEN
1195	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1196	q_vertical_gradient_level(i) >= 0.0 ) THEN
1197	gradient = q_vertical_gradient(i) / 100.0
1198	q_vertical_gradient_level_ind(i) = k - 1
1199	i = i + 1
1200	ENDIF
1201	ENDIF
1202	IF ( gradient /= 0.0 ) THEN
1203	IF ( k /= 1 ) THEN
1204	q_init(k) = q_init(k-1) + dzu(k) * gradient
1205	ELSE
1206	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1207	ENDIF
1208	ELSE
1209	q_init(k) = q_init(k-1)
1210	ENDIF
1211	!
1212	!-- Avoid negative humidities
1213	IF ( q_init(k) < 0.0 ) THEN
1214	q_init(k) = 0.0
1215	ENDIF
1216	ENDDO
1217
1218	!
1219	!-- In case of no given humidity gradients, choose zero gradient
1220	!-- conditions
1221	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1222	q_vertical_gradient_level(1) = 0.0
1223	ENDIF
1224
1225	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1226
1227	i = 1
1228	gradient = 0.0
1229	qr_vertical_gradient_level_ind(1) = 0
1230	DO k = 1, nzt+1
1231	IF ( i < 11 ) THEN
1232	IF ( qr_vertical_gradient_level(i) < zu(k) .AND. &
1233	qr_vertical_gradient_level(i) >= 0.0 ) THEN
1234	gradient = qr_vertical_gradient(i) / 100.0
1235	qr_vertical_gradient_level_ind(i) = k - 1
1236	i = i + 1
1237	ENDIF
1238	ENDIF
1239	IF ( gradient /= 0.0 ) THEN
1240	IF ( k /= 1 ) THEN
1241	qr_init(k) = qr_init(k-1) + dzu(k) * gradient
1242	ELSE
1243	qr_init(k) = qr_init(k-1) + 0.5 * dzu(k) * gradient
1244	ENDIF
1245	ELSE
1246	qr_init(k) = qr_init(k-1)
1247	ENDIF
1248	!
1249	!-- Avoid negative rain water content
1250	IF ( qr_init(k) < 0.0 ) THEN
1251	qr_init(k) = 0.0
1252	ENDIF
1253	ENDDO
1254	!
1255	!-- In case of no given rain water content gradients, choose zero gradient
1256	!-- conditions
1257	IF ( qr_vertical_gradient_level(1) == -1.0 ) THEN
1258	qr_vertical_gradient_level(1) = 0.0
1259	ENDIF
1260
1261	i = 1
1262	gradient = 0.0
1263	nr_vertical_gradient_level_ind(1) = 0
1264	DO k = 1, nzt+1
1265	IF ( i < 11 ) THEN
1266	IF ( nr_vertical_gradient_level(i) < zu(k) .AND. &
1267	nr_vertical_gradient_level(i) >= 0.0 ) THEN
1268	gradient = nr_vertical_gradient(i) / 100.0
1269	nr_vertical_gradient_level_ind(i) = k - 1
1270	i = i + 1
1271	ENDIF
1272	ENDIF
1273	IF ( gradient /= 0.0 ) THEN
1274	IF ( k /= 1 ) THEN
1275	nr_init(k) = nr_init(k-1) + dzu(k) * gradient
1276	ELSE
1277	nr_init(k) = nr_init(k-1) + 0.5 * dzu(k) * gradient
1278	ENDIF
1279	ELSE
1280	nr_init(k) = nr_init(k-1)
1281	ENDIF
1282	!
1283	!-- Avoid negative rain water content
1284	IF ( nr_init(k) < 0.0 ) THEN
1285	nr_init(k) = 0.0
1286	ENDIF
1287	ENDDO
1288	!
1289	!-- In case of no given rain water content gradients, choose zero gradient
1290	!-- conditions
1291	IF ( nr_vertical_gradient_level(1) == -1.0 ) THEN
1292	nr_vertical_gradient_level(1) = 0.0
1293	ENDIF
1294
1295	ENDIF
1296	!
1297	!-- Store humidity, rain water content and rain drop concentration
1298	!-- gradient at the top boundary for possile Neumann boundary condition
1299	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1300
1301	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1302	bc_qr_t_val = ( qr_init(nzt+1) - qr_init(nzt) ) / dzu(nzt+1)
1303	bc_nr_t_val = ( nr_init(nzt+1) - nr_init(nzt) ) / dzu(nzt+1)
1304	ENDIF
1305
1306	ENDIF
1307
1308	!
1309	!-- If required, compute initial salinity profile using the given salinity
1310	!-- gradients
1311	IF ( ocean ) THEN
1312
1313	i = 1
1314	gradient = 0.0
1315
1316	sa_vertical_gradient_level_ind(1) = nzt+1
1317	DO k = nzt, 0, -1
1318	IF ( i < 11 ) THEN
1319	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1320	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1321	gradient = sa_vertical_gradient(i) / 100.0
1322	sa_vertical_gradient_level_ind(i) = k + 1
1323	i = i + 1
1324	ENDIF
1325	ENDIF
1326	IF ( gradient /= 0.0 ) THEN
1327	IF ( k /= nzt ) THEN
1328	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1329	ELSE
1330	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1331	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1332	ENDIF
1333	ELSE
1334	sa_init(k) = sa_init(k+1)
1335	ENDIF
1336	ENDDO
1337
1338	ENDIF
1339
1340	!
1341	!-- If required compute the profile of leaf area density used in the plant
1342	!-- canopy model
1343	IF ( plant_canopy ) THEN
1344
1345	i = 1
1346	gradient = 0.0
1347
1348	IF ( .NOT. ocean ) THEN
1349
1350	lad(0) = lad_surface
1351
1352	lad_vertical_gradient_level_ind(1) = 0
1353	DO k = 1, pch_index
1354	IF ( i < 11 ) THEN
1355	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1356	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1357	gradient = lad_vertical_gradient(i)
1358	lad_vertical_gradient_level_ind(i) = k - 1
1359	i = i + 1
1360	ENDIF
1361	ENDIF
1362	IF ( gradient /= 0.0 ) THEN
1363	IF ( k /= 1 ) THEN
1364	lad(k) = lad(k-1) + dzu(k) * gradient
1365	ELSE
1366	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1367	ENDIF
1368	ELSE
1369	lad(k) = lad(k-1)
1370	ENDIF
1371	ENDDO
1372
1373	ENDIF
1374
1375	!
1376	!-- In case of no given leaf area density gradients, choose a vanishing
1377	!-- gradient
1378	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1379	lad_vertical_gradient_level(1) = 0.0
1380	ENDIF
1381
1382	ENDIF
1383
1384	ENDIF
1385
1386	!
1387	!-- Initialize large scale subsidence if required
1388	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1389	large_scale_subsidence = .TRUE.
1390	CALL init_w_subsidence
1391	END IF
1392
1393
1394
1395	!
1396	!-- Compute Coriolis parameter
1397	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1398	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1399
1400	!
1401	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1402	!-- set the reference temperature equal to the surface temperature.
1403	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1404
1405	!
1406	!-- Reference value has to be used in buoyancy terms
1407	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1408
1409	!
1410	!-- Sign of buoyancy/stability terms
1411	IF ( ocean ) atmos_ocean_sign = -1.0
1412
1413	!
1414	!-- Ocean version must use flux boundary conditions at the top
1415	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1416	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1417	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1418	ENDIF
1419
1420	!
1421	!-- In case of a given slope, compute the relevant quantities
1422	IF ( alpha_surface /= 0.0 ) THEN
1423	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1424	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1425	' ) must be < 90.0'
1426	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1427	ENDIF
1428	sloping_surface = .TRUE.
1429	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1430	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1431	ENDIF
1432
1433	!
1434	!-- Check time step and cfl_factor
1435	IF ( dt /= -1.0 ) THEN
1436	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1437	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1438	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1439	ENDIF
1440	dt_3d = dt
1441	dt_fixed = .TRUE.
1442	ENDIF
1443
1444	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1445	IF ( cfl_factor == -1.0 ) THEN
1446	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1447	cfl_factor = 0.8
1448	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1449	cfl_factor = 0.9
1450	ELSE
1451	cfl_factor = 0.9
1452	ENDIF
1453	ELSE
1454	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1455	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1456	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1457	ENDIF
1458	ENDIF
1459
1460	!
1461	!-- Store simulated time at begin
1462	simulated_time_at_begin = simulated_time
1463
1464	!
1465	!-- Store reference time for coupled runs and change the coupling flag,
1466	!-- if ...
1467	IF ( simulated_time == 0.0 ) THEN
1468	IF ( coupling_start_time == 0.0 ) THEN
1469	time_since_reference_point = 0.0
1470	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1471	run_coupled = .FALSE.
1472	ENDIF
1473	ENDIF
1474
1475	!
1476	!-- Set wind speed in the Galilei-transformed system
1477	IF ( galilei_transformation ) THEN
1478	IF ( use_ug_for_galilei_tr .AND. &
1479	ug_vertical_gradient_level(1) == 0.0 .AND. &
1480	ug_vertical_gradient(1) == 0.0 .AND. &
1481	vg_vertical_gradient_level(1) == 0.0 .AND. &
1482	vg_vertical_gradient(1) == 0.0 ) THEN
1483	u_gtrans = ug_surface * 0.6
1484	v_gtrans = vg_surface * 0.6
1485	ELSEIF ( use_ug_for_galilei_tr .AND. &
1486	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1487	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1488	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1489	' with galilei transformation'
1490	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1491	ELSEIF ( use_ug_for_galilei_tr .AND. &
1492	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1493	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1494	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1495	' with galilei transformation'
1496	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1497	ELSE
1498	message_string = 'variable translation speed used for galilei-' // &
1499	'transformation, which may cause & instabilities in stably ' // &
1500	'stratified regions'
1501	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1502	ENDIF
1503	ENDIF
1504
1505	!
1506	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1507	!-- fluxes have to be used in the diffusion-terms
1508	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1509
1510	!
1511	!-- Check boundary conditions and set internal variables:
1512	!-- Lateral boundary conditions
1513	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1514	bc_lr /= 'radiation/dirichlet' .AND. bc_lr /= 'dirichlet/neumann' &
1515	.AND. bc_lr /= 'neumann/dirichlet' ) THEN
1516	message_string = 'unknown boundary condition: bc_lr = "' // &
1517	TRIM( bc_lr ) // '"'
1518	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1519	ENDIF
1520	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1521	bc_ns /= 'radiation/dirichlet' .AND. bc_ns /= 'dirichlet/neumann' &
1522	.AND. bc_ns /= 'neumann/dirichlet' ) THEN
1523	message_string = 'unknown boundary condition: bc_ns = "' // &
1524	TRIM( bc_ns ) // '"'
1525	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1526	ENDIF
1527
1528	!
1529	!-- Internal variables used for speed optimization in if clauses
1530	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1531	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1532	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1533	IF ( bc_lr == 'dirichlet/neumann' ) bc_lr_dirneu = .TRUE.
1534	IF ( bc_lr == 'neumann/dirichlet' ) bc_lr_neudir = .TRUE.
1535	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1536	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1537	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1538	IF ( bc_ns == 'dirichlet/neumann' ) bc_ns_dirneu = .TRUE.
1539	IF ( bc_ns == 'neumann/dirichlet' ) bc_ns_neudir = .TRUE.
1540
1541	!
1542	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1543	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1544	!-- and tools do not work with non-cyclic boundary conditions.
1545	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1546	IF ( psolver /= 'multigrid' ) THEN
1547	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1548	'psolver = "' // TRIM( psolver ) // '"'
1549	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1550	ENDIF
1551	IF ( momentum_advec /= 'pw-scheme' .AND. &
1552	momentum_advec /= 'ws-scheme') THEN
1553	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1554	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1555	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1556	ENDIF
1557	IF ( scalar_advec /= 'pw-scheme' .AND. &
1558	scalar_advec /= 'ws-scheme' ) THEN
1559	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1560	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1561	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1562	ENDIF
1563	IF ( galilei_transformation ) THEN
1564	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1565	'galilei_transformation = .T.'
1566	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1567	ENDIF
1568	ENDIF
1569
1570	!
1571	!-- Bottom boundary condition for the turbulent Kinetic energy
1572	IF ( bc_e_b == 'neumann' ) THEN
1573	ibc_e_b = 1
1574	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1575	ibc_e_b = 2
1576	IF ( prandtl_layer ) THEN
1577	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1578	TRIM( bc_e_b ) // '"'
1579	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1580	ENDIF
1581	IF ( .NOT. prandtl_layer ) THEN
1582	bc_e_b = 'neumann'
1583	ibc_e_b = 1
1584	message_string = 'boundary condition bc_e_b changed to "' // &
1585	TRIM( bc_e_b ) // '"'
1586	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1587	ENDIF
1588	ELSE
1589	message_string = 'unknown boundary condition: bc_e_b = "' // &
1590	TRIM( bc_e_b ) // '"'
1591	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1592	ENDIF
1593
1594	!
1595	!-- Boundary conditions for perturbation pressure
1596	IF ( bc_p_b == 'dirichlet' ) THEN
1597	ibc_p_b = 0
1598	ELSEIF ( bc_p_b == 'neumann' ) THEN
1599	ibc_p_b = 1
1600	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1601	ibc_p_b = 2
1602	ELSE
1603	message_string = 'unknown boundary condition: bc_p_b = "' // &
1604	TRIM( bc_p_b ) // '"'
1605	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1606	ENDIF
1607	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1608	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1609	'" not allowed with prandtl_layer = .FALSE.'
1610	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1611	ENDIF
1612	IF ( bc_p_t == 'dirichlet' ) THEN
1613	ibc_p_t = 0
1614	ELSEIF ( bc_p_t == 'neumann' ) THEN
1615	ibc_p_t = 1
1616	ELSE
1617	message_string = 'unknown boundary condition: bc_p_t = "' // &
1618	TRIM( bc_p_t ) // '"'
1619	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1620	ENDIF
1621
1622	!
1623	!-- Boundary conditions for potential temperature
1624	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1625	ibc_pt_b = 2
1626	ELSE
1627	IF ( bc_pt_b == 'dirichlet' ) THEN
1628	ibc_pt_b = 0
1629	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1630	ibc_pt_b = 1
1631	ELSE
1632	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1633	TRIM( bc_pt_b ) // '"'
1634	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1635	ENDIF
1636	ENDIF
1637
1638	IF ( bc_pt_t == 'dirichlet' ) THEN
1639	ibc_pt_t = 0
1640	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1641	ibc_pt_t = 1
1642	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1643	ibc_pt_t = 2
1644	ELSE
1645	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1646	TRIM( bc_pt_t ) // '"'
1647	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1648	ENDIF
1649
1650	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1651	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1652
1653	IF ( neutral ) THEN
1654
1655	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1656	THEN
1657	message_string = 'heatflux must not be set for pure neutral flow'
1658	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1659	ENDIF
1660
1661	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1662	THEN
1663	message_string = 'heatflux must not be set for pure neutral flow'
1664	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1665	ENDIF
1666
1667	ENDIF
1668
1669	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1670	top_momentumflux_v /= 9999999.9 ) THEN
1671	constant_top_momentumflux = .TRUE.
1672	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1673	top_momentumflux_v == 9999999.9 ) ) THEN
1674	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1675	'must be set'
1676	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1677	ENDIF
1678
1679	!
1680	!-- A given surface temperature implies Dirichlet boundary condition for
1681	!-- temperature. In this case specification of a constant heat flux is
1682	!-- forbidden.
1683	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1684	surface_heatflux /= 0.0 ) THEN
1685	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1686	'& is not allowed with constant_heatflux = .TRUE.'
1687	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1688	ENDIF
1689	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1690	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1691	'wed with pt_surface_initial_change (/=0) = ', &
1692	pt_surface_initial_change
1693	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1694	ENDIF
1695
1696	!
1697	!-- A given temperature at the top implies Dirichlet boundary condition for
1698	!-- temperature. In this case specification of a constant heat flux is
1699	!-- forbidden.
1700	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1701	top_heatflux /= 0.0 ) THEN
1702	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1703	'" is not allowed with constant_top_heatflux = .TRUE.'
1704	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1705	ENDIF
1706
1707	!
1708	!-- Boundary conditions for salinity
1709	IF ( ocean ) THEN
1710	IF ( bc_sa_t == 'dirichlet' ) THEN
1711	ibc_sa_t = 0
1712	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1713	ibc_sa_t = 1
1714	ELSE
1715	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1716	TRIM( bc_sa_t ) // '"'
1717	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1718	ENDIF
1719
1720	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1721	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1722	message_string = 'boundary condition: bc_sa_t = "' // &
1723	TRIM( bc_sa_t ) // '" requires to set ' // &
1724	'top_salinityflux'
1725	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1726	ENDIF
1727
1728	!
1729	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1730	!-- salinity. In this case specification of a constant salinity flux is
1731	!-- forbidden.
1732	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1733	top_salinityflux /= 0.0 ) THEN
1734	message_string = 'boundary condition: bc_sa_t = "' // &
1735	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1736	'constant_top_salinityflux = .TRUE.'
1737	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1738	ENDIF
1739
1740	ENDIF
1741
1742	!
1743	!-- In case of humidity or passive scalar, set boundary conditions for total
1744	!-- water content / scalar
1745	IF ( humidity .OR. passive_scalar ) THEN
1746	IF ( humidity ) THEN
1747	sq = 'q'
1748	ELSE
1749	sq = 's'
1750	ENDIF
1751	IF ( bc_q_b == 'dirichlet' ) THEN
1752	ibc_q_b = 0
1753	ELSEIF ( bc_q_b == 'neumann' ) THEN
1754	ibc_q_b = 1
1755	ELSE
1756	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1757	'_b ="' // TRIM( bc_q_b ) // '"'
1758	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1759	ENDIF
1760	IF ( bc_q_t == 'dirichlet' ) THEN
1761	ibc_q_t = 0
1762	ELSEIF ( bc_q_t == 'neumann' ) THEN
1763	ibc_q_t = 1
1764	ELSE
1765	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1766	'_t ="' // TRIM( bc_q_t ) // '"'
1767	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1768	ENDIF
1769
1770	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1771
1772	!
1773	!-- A given surface humidity implies Dirichlet boundary condition for
1774	!-- humidity. In this case specification of a constant water flux is
1775	!-- forbidden.
1776	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1777	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1778	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1779	'th prescribed surface flux'
1780	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1781	ENDIF
1782	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1783	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1784	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1785	q_surface_initial_change
1786	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1787	ENDIF
1788
1789	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1790	IF ( bc_qr_b == 'dirichlet' ) THEN
1791	ibc_qr_b = 0
1792	ELSEIF ( bc_qr_b == 'neumann' ) THEN
1793	ibc_qr_b = 1
1794	ELSE
1795	message_string = 'unknown boundary condition: bc_qr_b ="' // &
1796	TRIM( bc_qr_b ) // '"'
1797	CALL message( 'check_parameters', 'PA0352', 1, 2, 0, 6, 0 )
1798	ENDIF
1799	IF ( bc_qr_t == 'dirichlet' ) THEN
1800	ibc_qr_t = 0
1801	ELSEIF ( bc_qr_t == 'neumann' ) THEN
1802	ibc_qr_t = 1
1803	ELSE
1804	message_string = 'unknown boundary condition: bc_qr_t ="' // &
1805	TRIM( bc_qr_t ) // '"'
1806	CALL message( 'check_parameters', 'PA0353', 1, 2, 0, 6, 0 )
1807	ENDIF
1808	IF ( bc_nr_b == 'dirichlet' ) THEN
1809	ibc_nr_b = 0
1810	ELSEIF ( bc_nr_b == 'neumann' ) THEN
1811	ibc_nr_b = 1
1812	ELSE
1813	message_string = 'unknown boundary condition: bc_nr_b ="' // &
1814	TRIM( bc_nr_b ) // '"'
1815	CALL message( 'check_parameters', 'PA0355', 1, 2, 0, 6, 0 )
1816	ENDIF
1817	IF ( bc_nr_t == 'dirichlet' ) THEN
1818	ibc_nr_t = 0
1819	ELSEIF ( bc_nr_t == 'neumann' ) THEN
1820	ibc_nr_t = 1
1821	ELSE
1822	message_string = 'unknown boundary condition: bc_nr_t ="' // &
1823	TRIM( bc_nr_t ) // '"'
1824	CALL message( 'check_parameters', 'PA0356', 1, 2, 0, 6, 0 )
1825	ENDIF
1826	ENDIF
1827
1828	ENDIF
1829
1830	!
1831	!-- Boundary conditions for horizontal components of wind speed
1832	IF ( bc_uv_b == 'dirichlet' ) THEN
1833	ibc_uv_b = 0
1834	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1835	ibc_uv_b = 1
1836	IF ( prandtl_layer ) THEN
1837	message_string = 'boundary condition: bc_uv_b = "' // &
1838	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1839	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1840	ENDIF
1841	ELSE
1842	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1843	TRIM( bc_uv_b ) // '"'
1844	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1845	ENDIF
1846	!
1847	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1848	!-- assigned with the u and v values of the ocean surface
1849	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1850	ibc_uv_b = 2
1851	ENDIF
1852
1853	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1854	bc_uv_t = 'neumann'
1855	ibc_uv_t = 1
1856	ELSE
1857	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1858	ibc_uv_t = 0
1859	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1860	!
1861	!-- Velocities for the initial u,v-profiles are set zero at the top
1862	!-- in case of dirichlet_0 conditions
1863	u_init(nzt+1) = 0.0
1864	v_init(nzt+1) = 0.0
1865	ENDIF
1866	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1867	ibc_uv_t = 1
1868	ELSE
1869	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1870	TRIM( bc_uv_t ) // '"'
1871	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1872	ENDIF
1873	ENDIF
1874
1875	!
1876	!-- Compute and check, respectively, the Rayleigh Damping parameter
1877	IF ( rayleigh_damping_factor == -1.0 ) THEN
1878	rayleigh_damping_factor = 0.0
1879	ELSE
1880	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1881	THEN
1882	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1883	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1884	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1885	ENDIF
1886	ENDIF
1887
1888	IF ( rayleigh_damping_height == -1.0 ) THEN
1889	IF ( .NOT. ocean ) THEN
1890	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1891	ELSE
1892	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1893	ENDIF
1894	ELSE
1895	IF ( .NOT. ocean ) THEN
1896	IF ( rayleigh_damping_height < 0.0 .OR. &
1897	rayleigh_damping_height > zu(nzt) ) THEN
1898	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1899	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1900	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1901	ENDIF
1902	ELSE
1903	IF ( rayleigh_damping_height > 0.0 .OR. &
1904	rayleigh_damping_height < zu(nzb) ) THEN
1905	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1906	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1907	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1908	ENDIF
1909	ENDIF
1910	ENDIF
1911
1912	!
1913	!-- Check number of chosen statistic regions. More than 10 regions are not
1914	!-- allowed, because so far no more than 10 corresponding output files can
1915	!-- be opened (cf. check_open)
1916	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1917	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1918	statistic_regions+1, ' but only 10 regions are allowed'
1919	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1920	ENDIF
1921	IF ( normalizing_region > statistic_regions .OR. &
1922	normalizing_region < 0) THEN
1923	WRITE ( message_string, * ) 'normalizing_region = ', &
1924	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1925	' (value of statistic_regions)'
1926	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1927	ENDIF
1928
1929	!
1930	!-- Check the interval for sorting particles.
1931	!-- Using particles as cloud droplets requires sorting after each timestep.
1932	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1933	dt_sort_particles = 0.0
1934	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1935	'_droplets = .TRUE.'
1936	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1937	ENDIF
1938
1939	!
1940	!-- Set the default intervals for data output, if necessary
1941	!-- NOTE: dt_dosp has already been set in package_parin
1942	IF ( dt_data_output /= 9999999.9 ) THEN
1943	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1944	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1945	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1946	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1947	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1948	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1949	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1950	DO mid = 1, max_masks
1951	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1952	ENDDO
1953	ENDIF
1954
1955	!
1956	!-- Set the default skip time intervals for data output, if necessary
1957	IF ( skip_time_dopr == 9999999.9 ) &
1958	skip_time_dopr = skip_time_data_output
1959	IF ( skip_time_dosp == 9999999.9 ) &
1960	skip_time_dosp = skip_time_data_output
1961	IF ( skip_time_do2d_xy == 9999999.9 ) &
1962	skip_time_do2d_xy = skip_time_data_output
1963	IF ( skip_time_do2d_xz == 9999999.9 ) &
1964	skip_time_do2d_xz = skip_time_data_output
1965	IF ( skip_time_do2d_yz == 9999999.9 ) &
1966	skip_time_do2d_yz = skip_time_data_output
1967	IF ( skip_time_do3d == 9999999.9 ) &
1968	skip_time_do3d = skip_time_data_output
1969	IF ( skip_time_data_output_av == 9999999.9 ) &
1970	skip_time_data_output_av = skip_time_data_output
1971	DO mid = 1, max_masks
1972	IF ( skip_time_domask(mid) == 9999999.9 ) &
1973	skip_time_domask(mid) = skip_time_data_output
1974	ENDDO
1975
1976	!
1977	!-- Check the average intervals (first for 3d-data, then for profiles and
1978	!-- spectra)
1979	IF ( averaging_interval > dt_data_output_av ) THEN
1980	WRITE( message_string, * ) 'averaging_interval = ', &
1981	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1982	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1983	ENDIF
1984
1985	IF ( averaging_interval_pr == 9999999.9 ) THEN
1986	averaging_interval_pr = averaging_interval
1987	ENDIF
1988
1989	IF ( averaging_interval_pr > dt_dopr ) THEN
1990	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1991	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1992	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1993	ENDIF
1994
1995	IF ( averaging_interval_sp == 9999999.9 ) THEN
1996	averaging_interval_sp = averaging_interval
1997	ENDIF
1998
1999	IF ( averaging_interval_sp > dt_dosp ) THEN
2000	WRITE( message_string, * ) 'averaging_interval_sp = ', &
2001	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
2002	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
2003	ENDIF
2004
2005	!
2006	!-- Set the default interval for profiles entering the temporal average
2007	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
2008	dt_averaging_input_pr = dt_averaging_input
2009	ENDIF
2010
2011	!
2012	!-- Set the default interval for the output of timeseries to a reasonable
2013	!-- value (tries to minimize the number of calls of flow_statistics)
2014	IF ( dt_dots == 9999999.9 ) THEN
2015	IF ( averaging_interval_pr == 0.0 ) THEN
2016	dt_dots = MIN( dt_run_control, dt_dopr )
2017	ELSE
2018	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
2019	ENDIF
2020	ENDIF
2021
2022	!
2023	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
2024	IF ( dt_averaging_input > averaging_interval ) THEN
2025	WRITE( message_string, * ) 'dt_averaging_input = ', &
2026	dt_averaging_input, ' must be <= averaging_interval = ', &
2027	averaging_interval
2028	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
2029	ENDIF
2030
2031	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
2032	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
2033	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
2034	averaging_interval_pr
2035	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
2036	ENDIF
2037
2038	!
2039	!-- Set the default value for the integration interval of precipitation amount
2040	IF ( precipitation ) THEN
2041	IF ( precipitation_amount_interval == 9999999.9 ) THEN
2042	precipitation_amount_interval = dt_do2d_xy
2043	ELSE
2044	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
2045	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
2046	precipitation_amount_interval, ' must not be larger than ', &
2047	'dt_do2d_xy = ', dt_do2d_xy
2048	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
2049	ENDIF
2050	ENDIF
2051	ENDIF
2052
2053	!
2054	!-- Determine the number of output profiles and check whether they are
2055	!-- permissible
2056	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
2057
2058	dopr_n = dopr_n + 1
2059	i = dopr_n
2060
2061	!
2062	!-- Determine internal profile number (for hom, homs)
2063	!-- and store height levels
2064	SELECT CASE ( TRIM( data_output_pr(i) ) )
2065
2066	CASE ( 'u', '#u' )
2067	dopr_index(i) = 1
2068	dopr_unit(i) = 'm/s'
2069	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
2070	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2071	dopr_initial_index(i) = 5
2072	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
2073	data_output_pr(i) = data_output_pr(i)(2:)
2074	ENDIF
2075
2076	CASE ( 'v', '#v' )
2077	dopr_index(i) = 2
2078	dopr_unit(i) = 'm/s'
2079	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
2080	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2081	dopr_initial_index(i) = 6
2082	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
2083	data_output_pr(i) = data_output_pr(i)(2:)
2084	ENDIF
2085
2086	CASE ( 'w' )
2087	dopr_index(i) = 3
2088	dopr_unit(i) = 'm/s'
2089	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2090
2091	CASE ( 'pt', '#pt' )
2092	IF ( .NOT. cloud_physics ) THEN
2093	dopr_index(i) = 4
2094	dopr_unit(i) = 'K'
2095	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2096	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2097	dopr_initial_index(i) = 7
2098	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2099	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
2100	data_output_pr(i) = data_output_pr(i)(2:)
2101	ENDIF
2102	ELSE
2103	dopr_index(i) = 43
2104	dopr_unit(i) = 'K'
2105	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2106	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2107	dopr_initial_index(i) = 28
2108	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2109	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
2110	data_output_pr(i) = data_output_pr(i)(2:)
2111	ENDIF
2112	ENDIF
2113
2114	CASE ( 'e' )
2115	dopr_index(i) = 8
2116	dopr_unit(i) = 'm2/s2'
2117	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2118	hom(nzb,2,8,:) = 0.0
2119
2120	CASE ( 'km', '#km' )
2121	dopr_index(i) = 9
2122	dopr_unit(i) = 'm2/s'
2123	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2124	hom(nzb,2,9,:) = 0.0
2125	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2126	dopr_initial_index(i) = 23
2127	hom(:,2,23,:) = hom(:,2,9,:)
2128	data_output_pr(i) = data_output_pr(i)(2:)
2129	ENDIF
2130
2131	CASE ( 'kh', '#kh' )
2132	dopr_index(i) = 10
2133	dopr_unit(i) = 'm2/s'
2134	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2135	hom(nzb,2,10,:) = 0.0
2136	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2137	dopr_initial_index(i) = 24
2138	hom(:,2,24,:) = hom(:,2,10,:)
2139	data_output_pr(i) = data_output_pr(i)(2:)
2140	ENDIF
2141
2142	CASE ( 'l', '#l' )
2143	dopr_index(i) = 11
2144	dopr_unit(i) = 'm'
2145	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2146	hom(nzb,2,11,:) = 0.0
2147	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2148	dopr_initial_index(i) = 25
2149	hom(:,2,25,:) = hom(:,2,11,:)
2150	data_output_pr(i) = data_output_pr(i)(2:)
2151	ENDIF
2152
2153	CASE ( 'w"u"' )
2154	dopr_index(i) = 12
2155	dopr_unit(i) = 'm2/s2'
2156	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2157	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2158
2159	CASE ( 'wu' )
2160	dopr_index(i) = 13
2161	dopr_unit(i) = 'm2/s2'
2162	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2163
2164	CASE ( 'w"v"' )
2165	dopr_index(i) = 14
2166	dopr_unit(i) = 'm2/s2'
2167	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2168	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2169
2170	CASE ( 'wv' )
2171	dopr_index(i) = 15
2172	dopr_unit(i) = 'm2/s2'
2173	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2174
2175	CASE ( 'w"pt"' )
2176	dopr_index(i) = 16
2177	dopr_unit(i) = 'K m/s'
2178	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2179
2180	CASE ( 'wpt' )
2181	dopr_index(i) = 17
2182	dopr_unit(i) = 'K m/s'
2183	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2184
2185	CASE ( 'wpt' )
2186	dopr_index(i) = 18
2187	dopr_unit(i) = 'K m/s'
2188	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2189
2190	CASE ( 'wu' )
2191	dopr_index(i) = 19
2192	dopr_unit(i) = 'm2/s2'
2193	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2194	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2195
2196	CASE ( 'wv' )
2197	dopr_index(i) = 20
2198	dopr_unit(i) = 'm2/s2'
2199	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2200	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2201
2202	CASE ( 'wptBC' )
2203	dopr_index(i) = 21
2204	dopr_unit(i) = 'K m/s'
2205	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2206
2207	CASE ( 'wptBC' )
2208	dopr_index(i) = 22
2209	dopr_unit(i) = 'K m/s'
2210	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2211
2212	CASE ( 'sa', '#sa' )
2213	IF ( .NOT. ocean ) THEN
2214	message_string = 'data_output_pr = ' // &
2215	TRIM( data_output_pr(i) ) // ' is not imp' // &
2216	'lemented for ocean = .FALSE.'
2217	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2218	ELSE
2219	dopr_index(i) = 23
2220	dopr_unit(i) = 'psu'
2221	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2222	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2223	dopr_initial_index(i) = 26
2224	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2225	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2226	data_output_pr(i) = data_output_pr(i)(2:)
2227	ENDIF
2228	ENDIF
2229
2230	CASE ( 'u*2' )
2231	dopr_index(i) = 30
2232	dopr_unit(i) = 'm2/s2'
2233	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2234
2235	CASE ( 'v*2' )
2236	dopr_index(i) = 31
2237	dopr_unit(i) = 'm2/s2'
2238	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2239
2240	CASE ( 'w*2' )
2241	dopr_index(i) = 32
2242	dopr_unit(i) = 'm2/s2'
2243	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2244
2245	CASE ( 'pt*2' )
2246	dopr_index(i) = 33
2247	dopr_unit(i) = 'K2'
2248	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2249
2250	CASE ( 'e*' )
2251	dopr_index(i) = 34
2252	dopr_unit(i) = 'm2/s2'
2253	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2254
2255	CASE ( 'w2pt' )
2256	dopr_index(i) = 35
2257	dopr_unit(i) = 'K m2/s2'
2258	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2259
2260	CASE ( 'wpt2' )
2261	dopr_index(i) = 36
2262	dopr_unit(i) = 'K2 m/s'
2263	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2264
2265	CASE ( 'we' )
2266	dopr_index(i) = 37
2267	dopr_unit(i) = 'm3/s3'
2268	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2269
2270	CASE ( 'w*3' )
2271	dopr_index(i) = 38
2272	dopr_unit(i) = 'm3/s3'
2273	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2274
2275	CASE ( 'Sw' )
2276	dopr_index(i) = 39
2277	dopr_unit(i) = 'none'
2278	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2279
2280	CASE ( 'p' )
2281	dopr_index(i) = 40
2282	dopr_unit(i) = 'Pa'
2283	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2284
2285	CASE ( 'q', '#q' )
2286	IF ( .NOT. humidity ) THEN
2287	message_string = 'data_output_pr = ' // &
2288	TRIM( data_output_pr(i) ) // ' is not imp' // &
2289	'lemented for humidity = .FALSE.'
2290	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2291	ELSE
2292	dopr_index(i) = 41
2293	dopr_unit(i) = 'kg/kg'
2294	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2295	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2296	dopr_initial_index(i) = 26
2297	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2298	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2299	data_output_pr(i) = data_output_pr(i)(2:)
2300	ENDIF
2301	ENDIF
2302
2303	CASE ( 's', '#s' )
2304	IF ( .NOT. passive_scalar ) THEN
2305	message_string = 'data_output_pr = ' // &
2306	TRIM( data_output_pr(i) ) // ' is not imp' // &
2307	'lemented for passive_scalar = .FALSE.'
2308	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2309	ELSE
2310	dopr_index(i) = 41
2311	dopr_unit(i) = 'kg/m3'
2312	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2313	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2314	dopr_initial_index(i) = 26
2315	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2316	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2317	data_output_pr(i) = data_output_pr(i)(2:)
2318	ENDIF
2319	ENDIF
2320
2321	CASE ( 'qv', '#qv' )
2322	IF ( .NOT. cloud_physics ) THEN
2323	dopr_index(i) = 41
2324	dopr_unit(i) = 'kg/kg'
2325	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2326	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2327	dopr_initial_index(i) = 26
2328	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2329	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2330	data_output_pr(i) = data_output_pr(i)(2:)
2331	ENDIF
2332	ELSE
2333	dopr_index(i) = 42
2334	dopr_unit(i) = 'kg/kg'
2335	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2336	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2337	dopr_initial_index(i) = 27
2338	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2339	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2340	data_output_pr(i) = data_output_pr(i)(2:)
2341	ENDIF
2342	ENDIF
2343
2344	CASE ( 'lpt', '#lpt' )
2345	IF ( .NOT. cloud_physics ) THEN
2346	message_string = 'data_output_pr = ' // &
2347	TRIM( data_output_pr(i) ) // ' is not imp' // &
2348	'lemented for cloud_physics = .FALSE.'
2349	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2350	ELSE
2351	dopr_index(i) = 4
2352	dopr_unit(i) = 'K'
2353	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2354	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2355	dopr_initial_index(i) = 7
2356	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2357	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2358	data_output_pr(i) = data_output_pr(i)(2:)
2359	ENDIF
2360	ENDIF
2361
2362	CASE ( 'vpt', '#vpt' )
2363	dopr_index(i) = 44
2364	dopr_unit(i) = 'K'
2365	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2366	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2367	dopr_initial_index(i) = 29
2368	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2369	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2370	data_output_pr(i) = data_output_pr(i)(2:)
2371	ENDIF
2372
2373	CASE ( 'w"vpt"' )
2374	dopr_index(i) = 45
2375	dopr_unit(i) = 'K m/s'
2376	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2377
2378	CASE ( 'wvpt' )
2379	dopr_index(i) = 46
2380	dopr_unit(i) = 'K m/s'
2381	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2382
2383	CASE ( 'wvpt' )
2384	dopr_index(i) = 47
2385	dopr_unit(i) = 'K m/s'
2386	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2387
2388	CASE ( 'w"q"' )
2389	IF ( .NOT. humidity ) THEN
2390	message_string = 'data_output_pr = ' // &
2391	TRIM( data_output_pr(i) ) // ' is not imp' // &
2392	'lemented for humidity = .FALSE.'
2393	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2394	ELSE
2395	dopr_index(i) = 48
2396	dopr_unit(i) = 'kg/kg m/s'
2397	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2398	ENDIF
2399
2400	CASE ( 'wq' )
2401	IF ( .NOT. humidity ) THEN
2402	message_string = 'data_output_pr = ' // &
2403	TRIM( data_output_pr(i) ) // ' is not imp' // &
2404	'lemented for humidity = .FALSE.'
2405	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2406	ELSE
2407	dopr_index(i) = 49
2408	dopr_unit(i) = 'kg/kg m/s'
2409	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2410	ENDIF
2411
2412	CASE ( 'wq' )
2413	IF ( .NOT. humidity ) THEN
2414	message_string = 'data_output_pr = ' // &
2415	TRIM( data_output_pr(i) ) // ' is not imp' // &
2416	'lemented for humidity = .FALSE.'
2417	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2418	ELSE
2419	dopr_index(i) = 50
2420	dopr_unit(i) = 'kg/kg m/s'
2421	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2422	ENDIF
2423
2424	CASE ( 'w"s"' )
2425	IF ( .NOT. passive_scalar ) THEN
2426	message_string = 'data_output_pr = ' // &
2427	TRIM( data_output_pr(i) ) // ' is not imp' // &
2428	'lemented for passive_scalar = .FALSE.'
2429	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2430	ELSE
2431	dopr_index(i) = 48
2432	dopr_unit(i) = 'kg/m3 m/s'
2433	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2434	ENDIF
2435
2436	CASE ( 'ws' )
2437	IF ( .NOT. passive_scalar ) THEN
2438	message_string = 'data_output_pr = ' // &
2439	TRIM( data_output_pr(i) ) // ' is not imp' // &
2440	'lemented for passive_scalar = .FALSE.'
2441	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2442	ELSE
2443	dopr_index(i) = 49
2444	dopr_unit(i) = 'kg/m3 m/s'
2445	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2446	ENDIF
2447
2448	CASE ( 'ws' )
2449	IF ( .NOT. passive_scalar ) THEN
2450	message_string = 'data_output_pr = ' // &
2451	TRIM( data_output_pr(i) ) // ' is not imp' // &
2452	'lemented for passive_scalar = .FALSE.'
2453	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2454	ELSE
2455	dopr_index(i) = 50
2456	dopr_unit(i) = 'kg/m3 m/s'
2457	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2458	ENDIF
2459
2460	CASE ( 'w"qv"' )
2461	IF ( humidity .AND. .NOT. cloud_physics ) &
2462	THEN
2463	dopr_index(i) = 48
2464	dopr_unit(i) = 'kg/kg m/s'
2465	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2466	ELSEIF( humidity .AND. cloud_physics ) THEN
2467	dopr_index(i) = 51
2468	dopr_unit(i) = 'kg/kg m/s'
2469	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2470	ELSE
2471	message_string = 'data_output_pr = ' // &
2472	TRIM( data_output_pr(i) ) // ' is not imp' // &
2473	'lemented for cloud_physics = .FALSE. an&' // &
2474	'd humidity = .FALSE.'
2475	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2476	ENDIF
2477
2478	CASE ( 'wqv' )
2479	IF ( humidity .AND. .NOT. cloud_physics ) &
2480	THEN
2481	dopr_index(i) = 49
2482	dopr_unit(i) = 'kg/kg m/s'
2483	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2484	ELSEIF( humidity .AND. cloud_physics ) THEN
2485	dopr_index(i) = 52
2486	dopr_unit(i) = 'kg/kg m/s'
2487	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2488	ELSE
2489	message_string = 'data_output_pr = ' // &
2490	TRIM( data_output_pr(i) ) // ' is not imp' // &
2491	'lemented for cloud_physics = .FALSE. an&' // &
2492	'd humidity = .FALSE.'
2493	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2494	ENDIF
2495
2496	CASE ( 'wqv' )
2497	IF ( humidity .AND. .NOT. cloud_physics ) &
2498	THEN
2499	dopr_index(i) = 50
2500	dopr_unit(i) = 'kg/kg m/s'
2501	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2502	ELSEIF( humidity .AND. cloud_physics ) THEN
2503	dopr_index(i) = 53
2504	dopr_unit(i) = 'kg/kg m/s'
2505	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2506	ELSE
2507	message_string = 'data_output_pr = ' // &
2508	TRIM( data_output_pr(i) ) // ' is not imp' // &
2509	'lemented for cloud_physics = .FALSE. an&' // &
2510	'd humidity = .FALSE.'
2511	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2512	ENDIF
2513
2514	CASE ( 'ql' )
2515	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2516	message_string = 'data_output_pr = ' // &
2517	TRIM( data_output_pr(i) ) // ' is not imp' // &
2518	'lemented for cloud_physics = .FALSE. or' // &
2519	'&cloud_droplets = .FALSE.'
2520	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2521	ELSE
2522	dopr_index(i) = 54
2523	dopr_unit(i) = 'kg/kg'
2524	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2525	ENDIF
2526
2527	CASE ( 'wuu*:dz' )
2528	dopr_index(i) = 55
2529	dopr_unit(i) = 'm2/s3'
2530	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2531
2532	CASE ( 'wp:dz' )
2533	dopr_index(i) = 56
2534	dopr_unit(i) = 'm2/s3'
2535	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2536
2537	CASE ( 'w"e:dz' )
2538	dopr_index(i) = 57
2539	dopr_unit(i) = 'm2/s3'
2540	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2541
2542
2543	CASE ( 'u"pt"' )
2544	dopr_index(i) = 58
2545	dopr_unit(i) = 'K m/s'
2546	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2547
2548	CASE ( 'upt' )
2549	dopr_index(i) = 59
2550	dopr_unit(i) = 'K m/s'
2551	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2552
2553	CASE ( 'upt_t' )
2554	dopr_index(i) = 60
2555	dopr_unit(i) = 'K m/s'
2556	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2557
2558	CASE ( 'v"pt"' )
2559	dopr_index(i) = 61
2560	dopr_unit(i) = 'K m/s'
2561	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2562
2563	CASE ( 'vpt' )
2564	dopr_index(i) = 62
2565	dopr_unit(i) = 'K m/s'
2566	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2567
2568	CASE ( 'vpt_t' )
2569	dopr_index(i) = 63
2570	dopr_unit(i) = 'K m/s'
2571	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2572
2573	CASE ( 'rho' )
2574	IF ( .NOT. ocean ) THEN
2575	message_string = 'data_output_pr = ' // &
2576	TRIM( data_output_pr(i) ) // ' is not imp' // &
2577	'lemented for ocean = .FALSE.'
2578	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2579	ELSE
2580	dopr_index(i) = 64
2581	dopr_unit(i) = 'kg/m3'
2582	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2583	ENDIF
2584
2585	CASE ( 'w"sa"' )
2586	IF ( .NOT. ocean ) THEN
2587	message_string = 'data_output_pr = ' // &
2588	TRIM( data_output_pr(i) ) // ' is not imp' // &
2589	'lemented for ocean = .FALSE.'
2590	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2591	ELSE
2592	dopr_index(i) = 65
2593	dopr_unit(i) = 'psu m/s'
2594	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2595	ENDIF
2596
2597	CASE ( 'wsa' )
2598	IF ( .NOT. ocean ) THEN
2599	message_string = 'data_output_pr = ' // &
2600	TRIM( data_output_pr(i) ) // ' is not imp' // &
2601	'lemented for ocean = .FALSE.'
2602	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2603	ELSE
2604	dopr_index(i) = 66
2605	dopr_unit(i) = 'psu m/s'
2606	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2607	ENDIF
2608
2609	CASE ( 'wsa' )
2610	IF ( .NOT. ocean ) THEN
2611	message_string = 'data_output_pr = ' // &
2612	TRIM( data_output_pr(i) ) // ' is not imp' // &
2613	'lemented for ocean = .FALSE.'
2614	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2615	ELSE
2616	dopr_index(i) = 67
2617	dopr_unit(i) = 'psu m/s'
2618	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2619	ENDIF
2620
2621	CASE ( 'wp' )
2622	dopr_index(i) = 68
2623	dopr_unit(i) = 'm3/s3'
2624	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2625
2626	CASE ( 'w"e' )
2627	dopr_index(i) = 69
2628	dopr_unit(i) = 'm3/s3'
2629	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2630
2631	CASE ( 'q*2' )
2632	IF ( .NOT. humidity ) THEN
2633	message_string = 'data_output_pr = ' // &
2634	TRIM( data_output_pr(i) ) // ' is not imp' // &
2635	'lemented for humidity = .FALSE.'
2636	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2637	ELSE
2638	dopr_index(i) = 70
2639	dopr_unit(i) = 'kg2/kg2'
2640	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2641	ENDIF
2642
2643	CASE ( 'prho' )
2644	IF ( .NOT. ocean ) THEN
2645	message_string = 'data_output_pr = ' // &
2646	TRIM( data_output_pr(i) ) // ' is not imp' // &
2647	'lemented for ocean = .FALSE.'
2648	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2649	ELSE
2650	dopr_index(i) = 71
2651	dopr_unit(i) = 'kg/m3'
2652	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2653	ENDIF
2654
2655	CASE ( 'hyp' )
2656	dopr_index(i) = 72
2657	dopr_unit(i) = 'dbar'
2658	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2659
2660	CASE ( 'nr' )
2661	IF ( .NOT. cloud_physics ) THEN
2662	message_string = 'data_output_pr = ' // &
2663	TRIM( data_output_pr(i) ) // ' is not imp' // &
2664	'lemented for cloud_physics = .FALSE.'
2665	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2666	ELSEIF ( icloud_scheme /= 0 ) THEN
2667	message_string = 'data_output_pr = ' // &
2668	TRIM( data_output_pr(i) ) // ' is not imp' // &
2669	'lemented for cloud_scheme /= seifert_beheng'
2670	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2671	ELSE
2672	dopr_index(i) = 73
2673	dopr_unit(i) = '1/m3'
2674	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2675	ENDIF
2676
2677	CASE ( 'qr' )
2678	IF ( .NOT. cloud_physics ) THEN
2679	message_string = 'data_output_pr = ' // &
2680	TRIM( data_output_pr(i) ) // ' is not imp' // &
2681	'lemented for cloud_physics = .FALSE.'
2682	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2683	ELSEIF ( icloud_scheme /= 0 ) THEN
2684	message_string = 'data_output_pr = ' // &
2685	TRIM( data_output_pr(i) ) // ' is not imp' // &
2686	'lemented for cloud_scheme /= seifert_beheng'
2687	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2688	ELSE
2689	dopr_index(i) = 74
2690	dopr_unit(i) = 'kg/kg'
2691	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2692	ENDIF
2693
2694	CASE ( 'qc' )
2695	IF ( .NOT. cloud_physics ) THEN
2696	message_string = 'data_output_pr = ' // &
2697	TRIM( data_output_pr(i) ) // ' is not imp' // &
2698	'lemented for cloud_physics = .FALSE.'
2699	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2700	ELSEIF ( icloud_scheme /= 0 ) THEN
2701	message_string = 'data_output_pr = ' // &
2702	TRIM( data_output_pr(i) ) // ' is not imp' // &
2703	'lemented for cloud_scheme /= seifert_beheng'
2704	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2705	ELSE
2706	dopr_index(i) = 75
2707	dopr_unit(i) = 'kg/kg'
2708	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2709	ENDIF
2710
2711	CASE ( 'prr' )
2712	IF ( .NOT. cloud_physics ) THEN
2713	message_string = 'data_output_pr = ' // &
2714	TRIM( data_output_pr(i) ) // ' is not imp' // &
2715	'lemented for cloud_physics = .FALSE.'
2716	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2717	ELSEIF ( icloud_scheme /= 0 ) THEN
2718	message_string = 'data_output_pr = ' // &
2719	TRIM( data_output_pr(i) ) // ' is not imp' // &
2720	'lemented for cloud_scheme /= seifert_beheng'
2721	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2722	ELSEIF ( .NOT. precipitation ) THEN
2723	message_string = 'data_output_pr = ' // &
2724	TRIM( data_output_pr(i) ) // ' is not imp' // &
2725	'lemented for precipitation = .FALSE.'
2726	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2727
2728	ELSE
2729	dopr_index(i) = 76
2730	dopr_unit(i) = 'kg/kg m/s'
2731	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2732	ENDIF
2733
2734	CASE DEFAULT
2735
2736	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2737
2738	IF ( unit == 'illegal' ) THEN
2739	IF ( data_output_pr_user(1) /= ' ' ) THEN
2740	message_string = 'illegal value for data_output_pr or ' // &
2741	'data_output_pr_user = "' // &
2742	TRIM( data_output_pr(i) ) // '"'
2743	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2744	ELSE
2745	message_string = 'illegal value for data_output_pr = "' // &
2746	TRIM( data_output_pr(i) ) // '"'
2747	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2748	ENDIF
2749	ENDIF
2750
2751	END SELECT
2752
2753	ENDDO
2754
2755
2756	!
2757	!-- Append user-defined data output variables to the standard data output
2758	IF ( data_output_user(1) /= ' ' ) THEN
2759	i = 1
2760	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2761	i = i + 1
2762	ENDDO
2763	j = 1
2764	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2765	IF ( i > 100 ) THEN
2766	message_string = 'number of output quantitities given by data' // &
2767	'_output and data_output_user exceeds the limit of 100'
2768	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2769	ENDIF
2770	data_output(i) = data_output_user(j)
2771	i = i + 1
2772	j = j + 1
2773	ENDDO
2774	ENDIF
2775
2776	!
2777	!-- Check and set steering parameters for 2d/3d data output and averaging
2778	i = 1
2779	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2780	!
2781	!-- Check for data averaging
2782	ilen = LEN_TRIM( data_output(i) )
2783	j = 0 ! no data averaging
2784	IF ( ilen > 3 ) THEN
2785	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2786	j = 1 ! data averaging
2787	data_output(i) = data_output(i)(1:ilen-3)
2788	ENDIF
2789	ENDIF
2790	!
2791	!-- Check for cross section or volume data
2792	ilen = LEN_TRIM( data_output(i) )
2793	k = 0 ! 3d data
2794	var = data_output(i)(1:ilen)
2795	IF ( ilen > 3 ) THEN
2796	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2797	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2798	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2799	k = 1 ! 2d data
2800	var = data_output(i)(1:ilen-3)
2801	ENDIF
2802	ENDIF
2803	!
2804	!-- Check for allowed value and set units
2805	SELECT CASE ( TRIM( var ) )
2806
2807	CASE ( 'e' )
2808	IF ( constant_diffusion ) THEN
2809	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2810	'res constant_diffusion = .FALSE.'
2811	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2812	ENDIF
2813	unit = 'm2/s2'
2814
2815	CASE ( 'lpt' )
2816	IF ( .NOT. cloud_physics ) THEN
2817	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2818	'res cloud_physics = .TRUE.'
2819	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2820	ENDIF
2821	unit = 'K'
2822
2823	CASE ( 'nr' )
2824	IF ( .NOT. cloud_physics ) THEN
2825	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2826	'res cloud_physics = .TRUE.'
2827	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2828	ELSEIF ( icloud_scheme /= 0 ) THEN
2829	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2830	'res cloud_scheme = seifert_beheng'
2831	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2832	ENDIF
2833	unit = '1/m3'
2834
2835	CASE ( 'pc', 'pr' )
2836	IF ( .NOT. particle_advection ) THEN
2837	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2838	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2839	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2840	ENDIF
2841	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2842	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2843
2844	CASE ( 'prr' )
2845	IF ( .NOT. cloud_physics ) THEN
2846	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2847	'res cloud_physics = .TRUE.'
2848	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2849	ELSEIF ( icloud_scheme /= 0 ) THEN
2850	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2851	'res cloud_scheme = seifert_beheng'
2852	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2853	ELSEIF ( .NOT. precipitation ) THEN
2854	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2855	'res precipitation = .TRUE.'
2856	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2857	ENDIF
2858	unit = 'kg/kg m/s'
2859
2860	CASE ( 'q', 'vpt' )
2861	IF ( .NOT. humidity ) THEN
2862	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2863	'res humidity = .TRUE.'
2864	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2865	ENDIF
2866	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2867	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2868
2869	CASE ( 'qc' )
2870	IF ( .NOT. cloud_physics ) THEN
2871	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2872	'res cloud_physics = .TRUE.'
2873	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2874	ELSEIF ( icloud_scheme /= 0 ) THEN
2875	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2876	'res cloud_scheme = seifert_beheng'
2877	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2878	ENDIF
2879	unit = 'kg/kg'
2880
2881	CASE ( 'ql' )
2882	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2883	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2884	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2885	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2886	ENDIF
2887	unit = 'kg/kg'
2888
2889	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2890	IF ( .NOT. cloud_droplets ) THEN
2891	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2892	'res cloud_droplets = .TRUE.'
2893	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2894	ENDIF
2895	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2896	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2897	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2898
2899	CASE ( 'qr' )
2900	IF ( .NOT. cloud_physics ) THEN
2901	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2902	'res cloud_physics = .TRUE.'
2903	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2904	ELSEIF ( icloud_scheme /= 0 ) THEN
2905	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2906	'res cloud_scheme = seifert_beheng'
2907	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2908	ENDIF
2909	unit = 'kg/kg'
2910
2911	CASE ( 'qv' )
2912	IF ( .NOT. cloud_physics ) THEN
2913	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2914	'res cloud_physics = .TRUE.'
2915	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2916	ENDIF
2917	unit = 'kg/kg'
2918
2919	CASE ( 'rho' )
2920	IF ( .NOT. ocean ) THEN
2921	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2922	'res ocean = .TRUE.'
2923	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2924	ENDIF
2925	unit = 'kg/m3'
2926
2927	CASE ( 's' )
2928	IF ( .NOT. passive_scalar ) THEN
2929	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2930	'res passive_scalar = .TRUE.'
2931	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2932	ENDIF
2933	unit = 'conc'
2934
2935	CASE ( 'sa' )
2936	IF ( .NOT. ocean ) THEN
2937	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2938	'res ocean = .TRUE.'
2939	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2940	ENDIF
2941	unit = 'psu'
2942
2943	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2944	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2945	message_string = 'illegal value for data_output: "' // &
2946	TRIM( var ) // '" & only 2d-horizontal ' // &
2947	'cross sections are allowed for this value'
2948	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2949	ENDIF
2950	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2951	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2952	'res cloud_physics = .TRUE.'
2953	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2954	ENDIF
2955	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2956	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2957	'res precipitation = .TRUE.'
2958	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2959	ENDIF
2960	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2961	message_string = 'temporal averaging of precipitation ' // &
2962	'amount "' // TRIM( var ) // '" is not possible'
2963	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2964	ENDIF
2965	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2966	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2967	'res precipitation = .TRUE.'
2968	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2969	ENDIF
2970	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2971	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2972	'res humidity = .TRUE.'
2973	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2974	ENDIF
2975
2976	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2977	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2978	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2979	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2980	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2981	IF ( TRIM( var ) == 't*' ) unit = 'K'
2982	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2983	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2984	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2985
2986
2987	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2988	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2989	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2990	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2991	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2992	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2993	CONTINUE
2994
2995	CASE DEFAULT
2996	CALL user_check_data_output( var, unit )
2997
2998	IF ( unit == 'illegal' ) THEN
2999	IF ( data_output_user(1) /= ' ' ) THEN
3000	message_string = 'illegal value for data_output or ' // &
3001	'data_output_user = "' // TRIM( data_output(i) ) // '"'
3002	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
3003	ELSE
3004	message_string = 'illegal value for data_output =' // &
3005	TRIM( data_output(i) ) // '"'
3006	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
3007	ENDIF
3008	ENDIF
3009
3010	END SELECT
3011	!
3012	!-- Set the internal steering parameters appropriately
3013	IF ( k == 0 ) THEN
3014	do3d_no(j) = do3d_no(j) + 1
3015	do3d(j,do3d_no(j)) = data_output(i)
3016	do3d_unit(j,do3d_no(j)) = unit
3017	ELSE
3018	do2d_no(j) = do2d_no(j) + 1
3019	do2d(j,do2d_no(j)) = data_output(i)
3020	do2d_unit(j,do2d_no(j)) = unit
3021	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
3022	data_output_xy(j) = .TRUE.
3023	ENDIF
3024	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
3025	data_output_xz(j) = .TRUE.
3026	ENDIF
3027	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3028	data_output_yz(j) = .TRUE.
3029	ENDIF
3030	ENDIF
3031
3032	IF ( j == 1 ) THEN
3033	!
3034	!-- Check, if variable is already subject to averaging
3035	found = .FALSE.
3036	DO k = 1, doav_n
3037	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
3038	ENDDO
3039
3040	IF ( .NOT. found ) THEN
3041	doav_n = doav_n + 1
3042	doav(doav_n) = var
3043	ENDIF
3044	ENDIF
3045
3046	i = i + 1
3047	ENDDO
3048
3049	!
3050	!-- Averaged 2d or 3d output requires that an averaging interval has been set
3051	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
3052	WRITE( message_string, * ) 'output of averaged quantity "', &
3053	TRIM( doav(1) ), '_av" requires to set a ', &
3054	'non-zero & averaging interval'
3055	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
3056	ENDIF
3057
3058	!
3059	!-- Check sectional planes and store them in one shared array
3060	IF ( ANY( section_xy > nz + 1 ) ) THEN
3061	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3062	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3063	ENDIF
3064	IF ( ANY( section_xz > ny + 1 ) ) THEN
3065	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3066	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3067	ENDIF
3068	IF ( ANY( section_yz > nx + 1 ) ) THEN
3069	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3070	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3071	ENDIF
3072	section(:,1) = section_xy
3073	section(:,2) = section_xz
3074	section(:,3) = section_yz
3075
3076	!
3077	!-- Upper plot limit for 2D vertical sections
3078	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
3079	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3080	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3081	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3082	' (zu(nzt))'
3083	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3084	ENDIF
3085
3086	!
3087	!-- Upper plot limit for 3D arrays
3088	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3089
3090	!
3091	!-- Determine and check accuracy for compressed 3D plot output
3092	IF ( do3d_compress ) THEN
3093	!
3094	!-- Compression only permissible on T3E machines
3095	IF ( host(1:3) /= 't3e' ) THEN
3096	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3097	TRIM( host ) // '"'
3098	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3099	ENDIF
3100
3101	i = 1
3102	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3103
3104	ilen = LEN_TRIM( do3d_comp_prec(i) )
3105	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3106	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3107	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3108	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3109	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3110	ENDIF
3111
3112	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3113	var = do3d_comp_prec(i)(1:ilen-1)
3114
3115	SELECT CASE ( var )
3116
3117	CASE ( 'u' )
3118	j = 1
3119	CASE ( 'v' )
3120	j = 2
3121	CASE ( 'w' )
3122	j = 3
3123	CASE ( 'p' )
3124	j = 4
3125	CASE ( 'pt' )
3126	j = 5
3127
3128	CASE DEFAULT
3129	WRITE( message_string, * ) 'unknown variable "', &
3130	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3131	i, ')'
3132	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3133
3134	END SELECT
3135
3136	plot_3d_precision(j)%precision = prec
3137	i = i + 1
3138
3139	ENDDO
3140	ENDIF
3141
3142	!
3143	!-- Check the data output format(s)
3144	IF ( data_output_format(1) == ' ' ) THEN
3145	!
3146	!-- Default value
3147	netcdf_output = .TRUE.
3148	ELSE
3149	i = 1
3150	DO WHILE ( data_output_format(i) /= ' ' )
3151
3152	SELECT CASE ( data_output_format(i) )
3153
3154	CASE ( 'netcdf' )
3155	netcdf_output = .TRUE.
3156	CASE ( 'iso2d' )
3157	iso2d_output = .TRUE.
3158	CASE ( 'avs' )
3159	avs_output = .TRUE.
3160
3161	CASE DEFAULT
3162	message_string = 'unknown value for data_output_format "' // &
3163	TRIM( data_output_format(i) ) // '"'
3164	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3165
3166	END SELECT
3167
3168	i = i + 1
3169	IF ( i > 10 ) EXIT
3170
3171	ENDDO
3172	ENDIF
3173
3174	!
3175	!-- Set output format string (used in header)
3176	IF ( netcdf_output ) THEN
3177
3178	SELECT CASE ( netcdf_data_format )
3179	CASE ( 1 )
3180	output_format_netcdf = 'netCDF classic'
3181	CASE ( 2 )
3182	output_format_netcdf = 'netCDF 64bit offset'
3183	CASE ( 3 )
3184	output_format_netcdf = 'netCDF4/HDF5'
3185	CASE ( 4 )
3186	output_format_netcdf = 'netCDF4/HDF5 classic'
3187	CASE ( 5 )
3188	output_format_netcdf = 'parallel netCDF4/HDF5'
3189	CASE ( 6 )
3190	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3191
3192	END SELECT
3193
3194	ENDIF
3195
3196	!
3197	!-- Check mask conditions
3198	DO mid = 1, max_masks
3199	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3200	data_output_masks_user(mid,1) /= ' ' ) THEN
3201	masks = masks + 1
3202	ENDIF
3203	ENDDO
3204
3205	IF ( masks < 0 .OR. masks > max_masks ) THEN
3206	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3207	'<= ', max_masks, ' (=max_masks)'
3208	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3209	ENDIF
3210	IF ( masks > 0 ) THEN
3211	mask_scale(1) = mask_scale_x
3212	mask_scale(2) = mask_scale_y
3213	mask_scale(3) = mask_scale_z
3214	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3215	WRITE( message_string, * ) &
3216	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3217	'must be > 0.0'
3218	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3219	ENDIF
3220	!
3221	!-- Generate masks for masked data output
3222	CALL init_masks
3223	ENDIF
3224
3225	!
3226	!-- Check the NetCDF data format
3227	#if ! defined ( __check )
3228	IF ( netcdf_data_format > 2 ) THEN
3229	#if defined( __netcdf4 )
3230	CONTINUE
3231	#else
3232	message_string = 'netCDF: netCDF4 format requested but no ' // &
3233	'cpp-directive __netcdf4 given & switch ' // &
3234	'back to 64-bit offset format'
3235	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3236	netcdf_data_format = 2
3237	#endif
3238	ENDIF
3239	IF ( netcdf_data_format > 4 ) THEN
3240	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3241	CONTINUE
3242	#else
3243	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3244	'cpp-directive __netcdf4_parallel given & switch ' // &
3245	'back to netCDF4 non-parallel output'
3246	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3247	netcdf_data_format = netcdf_data_format - 2
3248	#endif
3249	ENDIF
3250	#endif
3251
3252	#if ! defined( __check )
3253	!
3254	!-- Check netcdf precison
3255	ldum = .FALSE.
3256	CALL define_netcdf_header( 'ch', ldum, 0 )
3257	#endif
3258	!
3259	!-- Check, whether a constant diffusion coefficient shall be used
3260	IF ( km_constant /= -1.0 ) THEN
3261	IF ( km_constant < 0.0 ) THEN
3262	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3263	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3264	ELSE
3265	IF ( prandtl_number < 0.0 ) THEN
3266	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3267	' < 0.0'
3268	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3269	ENDIF
3270	constant_diffusion = .TRUE.
3271
3272	IF ( prandtl_layer ) THEN
3273	message_string = 'prandtl_layer is not allowed with fixed ' // &
3274	'value of km'
3275	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3276	ENDIF
3277	ENDIF
3278	ENDIF
3279
3280	!
3281	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3282	!-- potential temperature, check the width of the damping layer
3283	IF ( bc_lr /= 'cyclic' ) THEN
3284	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3285	message_string = 'pt_damping_width out of range'
3286	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3287	ENDIF
3288	ENDIF
3289
3290	IF ( bc_ns /= 'cyclic' ) THEN
3291	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3292	message_string = 'pt_damping_width out of range'
3293	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3294	ENDIF
3295	ENDIF
3296
3297	!
3298	!-- Check value range for rif
3299	IF ( rif_min >= rif_max ) THEN
3300	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3301	'than rif_max = ', rif_max
3302	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3303	ENDIF
3304
3305	!
3306	!-- Determine upper and lower hight level indices for random perturbations
3307	IF ( disturbance_level_b == -9999999.9 ) THEN
3308	IF ( ocean ) THEN
3309	disturbance_level_b = zu((nzt*2)/3)
3310	disturbance_level_ind_b = ( nzt * 2 ) / 3
3311	ELSE
3312	disturbance_level_b = zu(nzb+3)
3313	disturbance_level_ind_b = nzb + 3
3314	ENDIF
3315	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3316	WRITE( message_string, * ) 'disturbance_level_b = ', &
3317	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3318	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3319	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3320	WRITE( message_string, * ) 'disturbance_level_b = ', &
3321	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3322	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3323	ELSE
3324	DO k = 3, nzt-2
3325	IF ( disturbance_level_b <= zu(k) ) THEN
3326	disturbance_level_ind_b = k
3327	EXIT
3328	ENDIF
3329	ENDDO
3330	ENDIF
3331
3332	IF ( disturbance_level_t == -9999999.9 ) THEN
3333	IF ( ocean ) THEN
3334	disturbance_level_t = zu(nzt-3)
3335	disturbance_level_ind_t = nzt - 3
3336	ELSE
3337	disturbance_level_t = zu(nzt/3)
3338	disturbance_level_ind_t = nzt / 3
3339	ENDIF
3340	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3341	WRITE( message_string, * ) 'disturbance_level_t = ', &
3342	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3343	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3344	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3345	WRITE( message_string, * ) 'disturbance_level_t = ', &
3346	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3347	disturbance_level_b
3348	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3349	ELSE
3350	DO k = 3, nzt-2
3351	IF ( disturbance_level_t <= zu(k) ) THEN
3352	disturbance_level_ind_t = k
3353	EXIT
3354	ENDIF
3355	ENDDO
3356	ENDIF
3357
3358	!
3359	!-- Check again whether the levels determined this way are ok.
3360	!-- Error may occur at automatic determination and too few grid points in
3361	!-- z-direction.
3362	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3363	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3364	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3365	disturbance_level_b
3366	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3367	ENDIF
3368
3369	!
3370	!-- Determine the horizontal index range for random perturbations.
3371	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3372	!-- near the inflow and the perturbation area is further limited to ...(1)
3373	!-- after the initial phase of the flow.
3374	dist_nxl = 0; dist_nxr = nx
3375	dist_nys = 0; dist_nyn = ny
3376	IF ( bc_lr /= 'cyclic' ) THEN
3377	IF ( inflow_disturbance_begin == -1 ) THEN
3378	inflow_disturbance_begin = MIN( 10, nx/2 )
3379	ENDIF
3380	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3381	THEN
3382	message_string = 'inflow_disturbance_begin out of range'
3383	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3384	ENDIF
3385	IF ( inflow_disturbance_end == -1 ) THEN
3386	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3387	ENDIF
3388	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3389	THEN
3390	message_string = 'inflow_disturbance_end out of range'
3391	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3392	ENDIF
3393	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3394	IF ( inflow_disturbance_begin == -1 ) THEN
3395	inflow_disturbance_begin = MIN( 10, ny/2 )
3396	ENDIF
3397	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3398	THEN
3399	message_string = 'inflow_disturbance_begin out of range'
3400	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3401	ENDIF
3402	IF ( inflow_disturbance_end == -1 ) THEN
3403	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3404	ENDIF
3405	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3406	THEN
3407	message_string = 'inflow_disturbance_end out of range'
3408	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3409	ENDIF
3410	ENDIF
3411
3412	IF ( bc_lr == 'radiation/dirichlet' .OR. bc_lr == 'neumann/dirichlet' ) THEN
3413	dist_nxr = nx - inflow_disturbance_begin
3414	dist_nxl(1) = nx - inflow_disturbance_end
3415	ELSEIF ( bc_lr == 'dirichlet/radiation' .OR. bc_lr == 'dirichlet/neumann' ) THEN
3416	dist_nxl = inflow_disturbance_begin
3417	dist_nxr(1) = inflow_disturbance_end
3418	ENDIF
3419	IF ( bc_ns == 'dirichlet/radiation' .OR. bc_ns == 'dirichlet/neumann' ) THEN
3420	dist_nyn = ny - inflow_disturbance_begin
3421	dist_nys(1) = ny - inflow_disturbance_end
3422	ELSEIF ( bc_ns == 'radiation/dirichlet' .OR. bc_ns == 'neumann/dirichlet' ) THEN
3423	dist_nys = inflow_disturbance_begin
3424	dist_nyn(1) = inflow_disturbance_end
3425	ENDIF
3426
3427	!
3428	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3429	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3430	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' .AND. bc_lr /= 'dirichlet/neumann' ) THEN
3431	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3432	'condition at the inflow boundary'
3433	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3434	ENDIF
3435
3436	!
3437	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3438	!-- data from prerun
3439	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' ) THEN
3440	message_string = 'turbulent_inflow = .T. requires ' // &
3441	'initializing_actions = ''cyclic_fill'' '
3442	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3443	ENDIF
3444
3445	!
3446	!-- In case of turbulent inflow calculate the index of the recycling plane
3447	IF ( turbulent_inflow ) THEN
3448	IF ( recycling_width == 9999999.9 ) THEN
3449	!
3450	!-- Set the default value for the width of the recycling domain
3451	recycling_width = 0.1 * nx * dx
3452	ELSE
3453	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3454	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3455	' ', recycling_width
3456	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3457	ENDIF
3458	ENDIF
3459	!
3460	!-- Calculate the index
3461	recycling_plane = recycling_width / dx
3462	ENDIF
3463
3464	!
3465	!-- Check random generator
3466	IF ( random_generator /= 'system-specific' .AND. &
3467	random_generator /= 'numerical-recipes' ) THEN
3468	message_string = 'unknown random generator: random_generator = "' // &
3469	TRIM( random_generator ) // '"'
3470	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3471	ENDIF
3472
3473	!
3474	!-- Determine damping level index for 1D model
3475	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3476	IF ( damp_level_1d == -1.0 ) THEN
3477	damp_level_1d = zu(nzt+1)
3478	damp_level_ind_1d = nzt + 1
3479	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3480	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3481	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3482	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3483	ELSE
3484	DO k = 1, nzt+1
3485	IF ( damp_level_1d <= zu(k) ) THEN
3486	damp_level_ind_1d = k
3487	EXIT
3488	ENDIF
3489	ENDDO
3490	ENDIF
3491	ENDIF
3492
3493	!
3494	!-- Check some other 1d-model parameters
3495	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3496	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3497	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3498	'" is unknown'
3499	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3500	ENDIF
3501	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3502	TRIM( dissipation_1d ) /= 'detering' ) THEN
3503	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3504	'" is unknown'
3505	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3506	ENDIF
3507
3508	!
3509	!-- Set time for the next user defined restart (time_restart is the
3510	!-- internal parameter for steering restart events)
3511	IF ( restart_time /= 9999999.9 ) THEN
3512	IF ( restart_time > time_since_reference_point ) THEN
3513	time_restart = restart_time
3514	ENDIF
3515	ELSE
3516	!
3517	!-- In case of a restart run, set internal parameter to default (no restart)
3518	!-- if the NAMELIST-parameter restart_time is omitted
3519	time_restart = 9999999.9
3520	ENDIF
3521
3522	!
3523	!-- Set default value of the time needed to terminate a model run
3524	IF ( termination_time_needed == -1.0 ) THEN
3525	IF ( host(1:3) == 'ibm' ) THEN
3526	termination_time_needed = 300.0
3527	ELSE
3528	termination_time_needed = 35.0
3529	ENDIF
3530	ENDIF
3531
3532	!
3533	!-- Check the time needed to terminate a model run
3534	IF ( host(1:3) == 't3e' ) THEN
3535	!
3536	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3537	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3538	IF ( termination_time_needed <= 30.0 ) THEN
3539	WRITE( message_string, * ) 'termination_time_needed = ', &
3540	termination_time_needed, ' must be > 30.0 on host "', &
3541	TRIM( host ), '"'
3542	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3543	ENDIF
3544	ELSEIF ( host(1:3) == 'ibm' ) THEN
3545	!
3546	!-- On IBM-regatta machines the time should be at least 300 seconds,
3547	!-- because the job time consumed before executing palm (for compiling,
3548	!-- copying of files, etc.) has to be regarded
3549	IF ( termination_time_needed < 300.0 ) THEN
3550	WRITE( message_string, * ) 'termination_time_needed = ', &
3551	termination_time_needed, ' should be >= 300.0 on host "', &
3552	TRIM( host ), '"'
3553	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3554	ENDIF
3555	ENDIF
3556
3557	!
3558	!-- Check pressure gradient conditions
3559	IF ( dp_external .AND. conserve_volume_flow ) THEN
3560	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3561	'w are .TRUE. but one of them must be .FALSE.'
3562	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3563	ENDIF
3564	IF ( dp_external ) THEN
3565	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3566	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3567	' of range'
3568	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3569	ENDIF
3570	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3571	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3572	'ro, i.e. the external pressure gradient & will not be applied'
3573	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3574	ENDIF
3575	ENDIF
3576	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3577	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3578	'.FALSE., i.e. the external pressure gradient & will not be applied'
3579	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3580	ENDIF
3581	IF ( conserve_volume_flow ) THEN
3582	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3583
3584	conserve_volume_flow_mode = 'initial_profiles'
3585
3586	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3587	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3588	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3589	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3590	conserve_volume_flow_mode
3591	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3592	ENDIF
3593	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3594	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3595	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3596	'require conserve_volume_flow_mode = ''initial_profiles'''
3597	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3598	ENDIF
3599	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3600	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3601	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3602	'require conserve_volume_flow_mode = ''initial_profiles''', &
3603	' or ''bulk_velocity'''
3604	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3605	ENDIF
3606	ENDIF
3607	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3608	( .NOT. conserve_volume_flow .OR. &
3609	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3610	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3611	'conserve_volume_flow = .T. and ', &
3612	'conserve_volume_flow_mode = ''bulk_velocity'''
3613	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3614	ENDIF
3615
3616	!
3617	!-- Check particle attributes
3618	IF ( particle_color /= 'none' ) THEN
3619	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3620	particle_color /= 'z' ) THEN
3621	message_string = 'illegal value for parameter particle_color: ' // &
3622	TRIM( particle_color)
3623	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3624	ELSE
3625	IF ( color_interval(2) <= color_interval(1) ) THEN
3626	message_string = 'color_interval(2) <= color_interval(1)'
3627	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3628	ENDIF
3629	ENDIF
3630	ENDIF
3631
3632	IF ( particle_dvrpsize /= 'none' ) THEN
3633	IF ( particle_dvrpsize /= 'absw' ) THEN
3634	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3635	' ' // TRIM( particle_color)
3636	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3637	ELSE
3638	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3639	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3640	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3641	ENDIF
3642	ENDIF
3643	ENDIF
3644
3645	!
3646	!-- Check &userpar parameters
3647	CALL user_check_parameters
3648
3649
3650
3651	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |