Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1061

Last change on this file since 1061 was 1061, checked in by raasch, 12 years ago
last version documented
Property svn:keywords set to `Id`
File size: 142.1 KB

Line
1	SUBROUTINE check_parameters
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 1061 2012-11-21 07:20:40Z raasch $
27	!
28	! 1060 2012-11-21 07:19:51Z raasch
29	! additional check for parameter turbulent_inflow
30	!
31	! 1053 2012-11-13 17:11:03Z hoffmann
32	! necessary changes for the new two-moment cloud physics scheme added:
33	! - check cloud physics scheme (Kessler or Seifert and Beheng)
34	! - plant_canopy is not allowed
35	! - currently, only cache loop_optimization is allowed
36	! - initial profiles of nr, qr
37	! - boundary condition of nr, qr
38	! - check output quantities (qr, nr, prr)
39	!
40	! 1036 2012-10-22 13:43:42Z raasch
41	! code put under GPL (PALM 3.9)
42	!
43	! 1031/1034 2012-10-22 11:32:49Z raasch
44	! check of netcdf4 parallel file support
45	!
46	! 1019 2012-09-28 06:46:45Z raasch
47	! non-optimized version of prognostic_equations not allowed any more
48	!
49	! 1015 2012-09-27 09:23:24Z raasch
50	! acc allowed for loop optimization,
51	! checks for adjustment of mixing length to the Prandtl mixing length removed
52	!
53	! 1003 2012-09-14 14:35:53Z raasch
54	! checks for cases with unequal subdomain sizes removed
55	!
56	! 1001 2012-09-13 14:08:46Z raasch
57	! all actions concerning leapfrog- and upstream-spline-scheme removed
58	!
59	! 996 2012-09-07 10:41:47Z raasch
60	! little reformatting
61
62	! 978 2012-08-09 08:28:32Z fricke
63	! setting of bc_lr/ns_dirneu/neudir
64	! outflow damping layer removed
65	! check for z0h*
66	! check for pt_damping_width
67	!
68	! 964 2012-07-26 09:14:24Z raasch
69	! check of old profil-parameters removed
70	!
71	! 940 2012-07-09 14:31:00Z raasch
72	! checks for parameter neutral
73	!
74	! 924 2012-06-06 07:44:41Z maronga
75	! Bugfix: preprocessor directives caused error during compilation
76	!
77	! 892 2012-05-02 13:51:44Z maronga
78	! Bugfix for parameter file check ( excluding __netcdf4 )
79	!
80	! 866 2012-03-28 06:44:41Z raasch
81	! use only 60% of the geostrophic wind as translation speed in case of Galilean
82	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
83	! timestep
84	!
85	! 861 2012-03-26 14:18:34Z suehring
86	! Check for topography and ws-scheme removed.
87	! Check for loop_optimization = 'vector' and ws-scheme removed.
88	!
89	! 845 2012-03-07 10:23:05Z maronga
90	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
91	!
92	! 828 2012-02-21 12:00:36Z raasch
93	! check of collision_kernel extended
94	!
95	! 825 2012-02-19 03:03:44Z raasch
96	! check for collision_kernel and curvature_solution_effects
97	!
98	! 809 2012-01-30 13:32:58Z maronga
99	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
100	!
101	! 807 2012-01-25 11:53:51Z maronga
102	! New cpp directive "__check" implemented which is used by check_namelist_files
103	!
104	! 774 2011-10-27 13:34:16Z letzel
105	! bugfix for prescribed u,v-profiles
106	!
107	! 767 2011-10-14 06:39:12Z raasch
108	! Calculating u,v-profiles from given profiles by linear interpolation.
109	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
110	!
111	! 707 2011-03-29 11:39:40Z raasch
112	! setting of bc_lr/ns_dirrad/raddir
113	!
114	! 689 2011-02-20 19:31:12z gryschka
115	! Bugfix for some logical expressions
116	! (syntax was not compatible with all compilers)
117	!
118	! 680 2011-02-04 23:16:06Z gryschka
119	! init_vortex is not allowed with volume_flow_control
120	!
121	! 673 2011-01-18 16:19:48Z suehring
122	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
123	!
124	! 667 2010-12-23 12:06:00Z suehring/gryschka
125	! Exchange of parameters between ocean and atmosphere via PE0
126	! Check for illegal combination of ws-scheme and timestep scheme.
127	! Check for topography and ws-scheme.
128	! Check for not cyclic boundary conditions in combination with ws-scheme and
129	! loop_optimization = 'vector'.
130	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
131	! Different processor/grid topology in atmosphere and ocean is now allowed!
132	! Bugfixes in checking for conserve_volume_flow_mode
133	! 600 2010-11-24 16:10:51Z raasch
134	! change due to new default value of surface_waterflux
135	! 580 2010-10-05 13:59:11Z heinze
136	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
137	!
138	! 567 2010-10-01 10:46:30Z helmke
139	! calculating masks changed
140	!
141	! 564 2010-09-30 13:18:59Z helmke
142	! palm message identifiers of masked output changed, 20 replaced by max_masks
143	!
144	! 553 2010-09-01 14:09:06Z weinreis
145	! masks is calculated and removed from inipar
146	!
147	! 531 2010-04-21 06:47:21Z heinze
148	! Bugfix: unit of hyp changed to dbar
149	!
150	! 524 2010-03-30 02:04:51Z raasch
151	! Bugfix: "/" in netcdf profile variable names replaced by ":"
152	!
153	! 493 2010-03-01 08:30:24Z raasch
154	! netcdf_data_format is checked
155	!
156	! 411 2009-12-11 14:15:58Z heinze
157	! Enabled passive scalar/humidity wall fluxes for non-flat topography
158	! Initialization of large scale vertical motion (subsidence/ascent)
159	!
160	! 410 2009-12-04 17:05:40Z letzel
161	! masked data output
162	!
163	! 388 2009-09-23 09:40:33Z raasch
164	! Check profiles fpr prho and hyp.
165	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
166	! interval has been set, respective error message is included
167	! bc_lr_cyc and bc_ns_cyc are set,
168	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
169	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
170	! Coupling with independent precursor runs.
171	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
172	! Bugfix: pressure included for profile output
173	! Check pressure gradient conditions
174	! topography_grid_convention moved from user_check_parameters
175	! 'single_street_canyon'
176	! Added shf* and qsws* to the list of available output data
177	!
178	! 222 2009-01-12 16:04:16Z letzel
179	! +user_check_parameters
180	! Output of messages replaced by message handling routine.
181	! Implementation of an MPI-1 coupling: replaced myid with target_id,
182	! deleted __mpi2 directives
183	! Check that PALM is called with mrun -K parallel for coupling
184	!
185	! 197 2008-09-16 15:29:03Z raasch
186	! Bug fix: Construction of vertical profiles when 10 gradients have been
187	! specified in the parameter list (ug, vg, pt, q, sa, lad)
188	!
189	! Strict grid matching along z is not needed for mg-solver.
190	! Leaf area density (LAD) explicitly set to its surface value at k=0
191	! Case of reading data for recycling included in initializing_actions,
192	! check of turbulent_inflow and calculation of recycling_plane.
193	! q*2 profile added
194	!
195	! 138 2007-11-28 10:03:58Z letzel
196	! Plant canopy added
197	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
198	! Multigrid solver allows topography, checking of dt_sort_particles
199	! Bugfix: initializing u_init and v_init in case of ocean runs
200	!
201	! 109 2007-08-28 15:26:47Z letzel
202	! Check coupling_mode and set default (obligatory) values (like boundary
203	! conditions for temperature and fluxes) in case of coupled runs.
204	! +profiles for wp and w"e
205	! Bugfix: Error message concerning output of particle concentration (pc)
206	! modified
207	! More checks and more default values for coupled runs
208	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
209	! cloud_physics = .T.)
210	! Rayleigh damping for ocean fixed.
211	! Check and, if necessary, set default value for dt_coupling
212	!
213	! 97 2007-06-21 08:23:15Z raasch
214	! Initial salinity profile is calculated, salinity boundary conditions are
215	! checked,
216	! z_max_do1d is checked only in case of ocean = .f.,
217	! +initial temperature and geostrophic velocity profiles for the ocean version,
218	! use_pt_reference renamed use_reference
219	!
220	! 89 2007-05-25 12:08:31Z raasch
221	! Check for user-defined profiles
222	!
223	! 75 2007-03-22 09:54:05Z raasch
224	! "by_user" allowed as initializing action, -data_output_ts,
225	! leapfrog with non-flat topography not allowed any more, loop_optimization
226	! and pt_reference are checked, moisture renamed humidity,
227	! output of precipitation amount/rate and roughnes length + check
228	! possible negative humidities are avoided in initial profile,
229	! dirichlet/neumann changed to dirichlet/radiation, etc.,
230	! revision added to run_description_header
231	!
232	! 20 2007-02-26 00:12:32Z raasch
233	! Temperature and humidity gradients at top are now calculated for nzt+1,
234	! top_heatflux and respective boundary condition bc_pt_t is checked
235	!
236	! RCS Log replace by Id keyword, revision history cleaned up
237	!
238	! Revision 1.61 2006/08/04 14:20:25 raasch
239	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
240	! use_upstream_for_tke, default value for dt_dopts,
241	! generation of file header moved from routines palm and header to here
242	!
243	! Revision 1.1 1997/08/26 06:29:23 raasch
244	! Initial revision
245	!
246	!
247	! Description:
248	! ------------
249	! Check control parameters and deduce further quantities.
250	!------------------------------------------------------------------------------!
251
252	USE arrays_3d
253	USE cloud_parameters
254	USE constants
255	USE control_parameters
256	USE dvrp_variables
257	USE grid_variables
258	USE indices
259	USE model_1d
260	USE netcdf_control
261	USE particle_attributes
262	USE pegrid
263	USE profil_parameter
264	USE subsidence_mod
265	USE statistics
266	USE transpose_indices
267
268	IMPLICIT NONE
269
270	CHARACTER (LEN=1) :: sq
271	CHARACTER (LEN=6) :: var
272	CHARACTER (LEN=7) :: unit
273	CHARACTER (LEN=8) :: date
274	CHARACTER (LEN=10) :: time
275	CHARACTER (LEN=40) :: coupling_string
276	CHARACTER (LEN=100) :: action
277
278	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
279	position, prec
280	LOGICAL :: found, ldum
281	REAL :: gradient, maxn, maxp, remote = 0.0, &
282	simulation_time_since_reference
283
284	!
285	!-- Warning, if host is not set
286	IF ( host(1:1) == ' ' ) THEN
287	message_string = '"host" is not set. Please check that environment ' // &
288	'variable "localhost" & is set before running PALM'
289	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
290	ENDIF
291
292	!
293	!-- Check the coupling mode
294	IF ( coupling_mode /= 'uncoupled' .AND. &
295	coupling_mode /= 'atmosphere_to_ocean' .AND. &
296	coupling_mode /= 'ocean_to_atmosphere' ) THEN
297	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
298	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
299	ENDIF
300
301	!
302	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
303	IF ( coupling_mode /= 'uncoupled') THEN
304
305	IF ( dt_coupling == 9999999.9 ) THEN
306	message_string = 'dt_coupling is not set but required for coup' // &
307	'ling mode "' // TRIM( coupling_mode ) // '"'
308	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
309	ENDIF
310
311	#if defined( __parallel )
312
313	!
314	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
315	!-- program.
316	!-- check_namelist_files will need the following information of the other
317	!-- model (atmosphere/ocean).
318	! dt_coupling = remote
319	! dt_max = remote
320	! restart_time = remote
321	! dt_restart= remote
322	! simulation_time_since_reference = remote
323	! dx = remote
324
325
326	#if ! defined( __check )
327	IF ( myid == 0 ) THEN
328	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
329	ierr )
330	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
331	status, ierr )
332	ENDIF
333	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
334	#endif
335	IF ( dt_coupling /= remote ) THEN
336	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
337	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
338	'dt_coupling_remote = ', remote
339	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
340	ENDIF
341	IF ( dt_coupling <= 0.0 ) THEN
342	#if ! defined( __check )
343	IF ( myid == 0 ) THEN
344	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
345	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
346	status, ierr )
347	ENDIF
348	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
349	#endif
350	dt_coupling = MAX( dt_max, remote )
351	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
352	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
353	'MAX(dt_max(A,O)) = ', dt_coupling
354	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
355	ENDIF
356	#if ! defined( __check )
357	IF ( myid == 0 ) THEN
358	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
359	ierr )
360	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
361	status, ierr )
362	ENDIF
363	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
364	#endif
365	IF ( restart_time /= remote ) THEN
366	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
367	'": restart_time = ', restart_time, '& is not equal to ', &
368	'restart_time_remote = ', remote
369	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
370	ENDIF
371	#if ! defined( __check )
372	IF ( myid == 0 ) THEN
373	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
374	ierr )
375	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
376	status, ierr )
377	ENDIF
378	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
379	#endif
380	IF ( dt_restart /= remote ) THEN
381	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
382	'": dt_restart = ', dt_restart, '& is not equal to ', &
383	'dt_restart_remote = ', remote
384	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
385	ENDIF
386
387	simulation_time_since_reference = end_time - coupling_start_time
388	#if ! defined( __check )
389	IF ( myid == 0 ) THEN
390	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
391	14, comm_inter, ierr )
392	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
393	status, ierr )
394	ENDIF
395	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
396	#endif
397	IF ( simulation_time_since_reference /= remote ) THEN
398	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
399	'": simulation_time_since_reference = ', &
400	simulation_time_since_reference, '& is not equal to ', &
401	'simulation_time_since_reference_remote = ', remote
402	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
403	ENDIF
404
405	#if ! defined( __check )
406	IF ( myid == 0 ) THEN
407	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
408	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
409	status, ierr )
410	ENDIF
411	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
412
413	#endif
414	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
415
416	IF ( dx < remote ) THEN
417	WRITE( message_string, * ) 'coupling mode "', &
418	TRIM( coupling_mode ), &
419	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
420	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
421	ENDIF
422
423	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
424	WRITE( message_string, * ) 'coupling mode "', &
425	TRIM( coupling_mode ), &
426	'": Domain size in x-direction is not equal in ocean and atmosphere'
427	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
428	ENDIF
429
430	ENDIF
431
432	#if ! defined( __check )
433	IF ( myid == 0) THEN
434	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
435	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
436	status, ierr )
437	ENDIF
438	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
439	#endif
440	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
441
442	IF ( dy < remote ) THEN
443	WRITE( message_string, * ) 'coupling mode "', &
444	TRIM( coupling_mode ), &
445	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
446	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
447	ENDIF
448
449	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
450	WRITE( message_string, * ) 'coupling mode "', &
451	TRIM( coupling_mode ), &
452	'": Domain size in y-direction is not equal in ocean and atmosphere'
453	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
454	ENDIF
455
456	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
457	WRITE( message_string, * ) 'coupling mode "', &
458	TRIM( coupling_mode ), &
459	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
460	' atmosphere'
461	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
462	ENDIF
463
464	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
465	WRITE( message_string, * ) 'coupling mode "', &
466	TRIM( coupling_mode ), &
467	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
468	' atmosphere'
469	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
470	ENDIF
471
472	ENDIF
473	#else
474	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
475	' ''mrun -K parallel'''
476	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
477	#endif
478	ENDIF
479
480	#if defined( __parallel ) && ! defined ( __check )
481	!
482	!-- Exchange via intercommunicator
483	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
484	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
485	ierr )
486	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
487	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
488	comm_inter, status, ierr )
489	ENDIF
490	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
491
492	#endif
493
494
495	!
496	!-- Generate the file header which is used as a header for most of PALM's
497	!-- output files
498	CALL DATE_AND_TIME( date, time )
499	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
500	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
501	IF ( coupling_mode == 'uncoupled' ) THEN
502	coupling_string = ''
503	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
504	coupling_string = ' coupled (atmosphere)'
505	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
506	coupling_string = ' coupled (ocean)'
507	ENDIF
508
509	WRITE ( run_description_header, &
510	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
511	TRIM( version ), TRIM( revision ), 'run: ', &
512	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
513	'host: ', TRIM( host ), run_date, run_time
514
515	!
516	!-- Check the general loop optimization method
517	IF ( loop_optimization == 'default' ) THEN
518	IF ( host(1:3) == 'nec' ) THEN
519	loop_optimization = 'vector'
520	ELSE
521	loop_optimization = 'cache'
522	ENDIF
523	ENDIF
524
525	SELECT CASE ( TRIM( loop_optimization ) )
526
527	CASE ( 'acc', 'cache', 'vector' )
528	CONTINUE
529
530	CASE DEFAULT
531	message_string = 'illegal value given for loop_optimization: "' // &
532	TRIM( loop_optimization ) // '"'
533	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
534
535	END SELECT
536
537	!
538	!-- Check topography setting (check for illegal parameter combinations)
539	IF ( topography /= 'flat' ) THEN
540	action = ' '
541	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
542	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
543	ENDIF
544	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
545	THEN
546	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
547	ENDIF
548	IF ( psolver == 'sor' ) THEN
549	WRITE( action, '(A,A)' ) 'psolver = ', psolver
550	ENDIF
551	IF ( sloping_surface ) THEN
552	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
553	ENDIF
554	IF ( galilei_transformation ) THEN
555	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
556	ENDIF
557	IF ( cloud_physics ) THEN
558	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
559	ENDIF
560	IF ( cloud_droplets ) THEN
561	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
562	ENDIF
563	IF ( .NOT. prandtl_layer ) THEN
564	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
565	ENDIF
566	IF ( action /= ' ' ) THEN
567	message_string = 'a non-flat topography does not allow ' // &
568	TRIM( action )
569	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
570	ENDIF
571	!
572	!-- In case of non-flat topography, check whether the convention how to
573	!-- define the topography grid has been set correctly, or whether the default
574	!-- is applicable. If this is not possible, abort.
575	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
576	IF ( TRIM( topography ) /= 'single_building' .AND. &
577	TRIM( topography ) /= 'single_street_canyon' .AND. &
578	TRIM( topography ) /= 'read_from_file' ) THEN
579	!-- The default value is not applicable here, because it is only valid
580	!-- for the two standard cases 'single_building' and 'read_from_file'
581	!-- defined in init_grid.
582	WRITE( message_string, * ) &
583	'The value for "topography_grid_convention" ', &
584	'is not set. Its default value is & only valid for ', &
585	'"topography" = ''single_building'', ', &
586	'''single_street_canyon'' & or ''read_from_file''.', &
587	' & Choose ''cell_edge'' or ''cell_center''.'
588	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
589	ELSE
590	!-- The default value is applicable here.
591	!-- Set convention according to topography.
592	IF ( TRIM( topography ) == 'single_building' .OR. &
593	TRIM( topography ) == 'single_street_canyon' ) THEN
594	topography_grid_convention = 'cell_edge'
595	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
596	topography_grid_convention = 'cell_center'
597	ENDIF
598	ENDIF
599	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
600	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
601	WRITE( message_string, * ) &
602	'The value for "topography_grid_convention" is ', &
603	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
604	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
605	ENDIF
606
607	ENDIF
608
609	!
610	!-- Check ocean setting
611	IF ( ocean ) THEN
612
613	action = ' '
614	IF ( action /= ' ' ) THEN
615	message_string = 'ocean = .T. does not allow ' // TRIM( action )
616	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
617	ENDIF
618
619	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
620	TRIM( coupling_char ) == '_O' ) THEN
621
622	!
623	!-- Check whether an (uncoupled) atmospheric run has been declared as an
624	!-- ocean run (this setting is done via mrun-option -y)
625
626	message_string = 'ocean = .F. does not allow coupling_char = "' // &
627	TRIM( coupling_char ) // '" set by mrun-option "-y"'
628	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
629
630	ENDIF
631	!
632	!-- Check cloud scheme
633	IF ( cloud_scheme == 'seifert_beheng' ) THEN
634	icloud_scheme = 0
635	ELSEIF ( cloud_scheme == 'kessler' ) THEN
636	icloud_scheme = 1
637	ELSE
638	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
639	TRIM( cloud_scheme ) // '"'
640	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
641	ENDIF
642	!
643	!-- Check whether there are any illegal values
644	!-- Pressure solver:
645	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
646	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
647	message_string = 'unknown solver for perturbation pressure: psolver' // &
648	' = "' // TRIM( psolver ) // '"'
649	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
650	ENDIF
651
652	#if defined( __parallel )
653	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
654	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
655	'for a 1d domain-decomposition along x & please do' // &
656	' not set npey/=1 in the parameter file'
657	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
658	ENDIF
659	#else
660	IF ( psolver == 'poisfft_hybrid' ) THEN
661	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
662	' for a parallel environment'
663	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
664	ENDIF
665	#endif
666
667	IF ( psolver == 'multigrid' ) THEN
668	IF ( cycle_mg == 'w' ) THEN
669	gamma_mg = 2
670	ELSEIF ( cycle_mg == 'v' ) THEN
671	gamma_mg = 1
672	ELSE
673	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
674	TRIM( cycle_mg ) // '"'
675	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
676	ENDIF
677	ENDIF
678
679	IF ( fft_method /= 'singleton-algorithm' .AND. &
680	fft_method /= 'temperton-algorithm' .AND. &
681	fft_method /= 'system-specific' ) THEN
682	message_string = 'unknown fft-algorithm: fft_method = "' // &
683	TRIM( fft_method ) // '"'
684	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
685	ENDIF
686
687	IF( momentum_advec == 'ws-scheme' .AND. &
688	.NOT. call_psolver_at_all_substeps ) THEN
689	message_string = 'psolver must be called at each RK3 substep when "'//&
690	TRIM(momentum_advec) // ' "is used for momentum_advec'
691	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
692	END IF
693	!
694	!-- Advection schemes:
695	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
696	THEN
697	message_string = 'unknown advection scheme: momentum_advec = "' // &
698	TRIM( momentum_advec ) // '"'
699	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
700	ENDIF
701	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
702	.AND. ( timestep_scheme == 'euler' .OR. &
703	timestep_scheme == 'runge-kutta-2' ) ) &
704	THEN
705	message_string = 'momentum_advec or scalar_advec = "' &
706	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
707	TRIM( timestep_scheme ) // '"'
708	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
709	ENDIF
710	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
711	scalar_advec /= 'bc-scheme' ) &
712	THEN
713	message_string = 'unknown advection scheme: scalar_advec = "' // &
714	TRIM( scalar_advec ) // '"'
715	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
716	ENDIF
717	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
718	THEN
719	message_string = 'advection_scheme scalar_advec = "' &
720	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
721	TRIM( loop_optimization ) // '"'
722	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
723	ENDIF
724
725	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
726	use_upstream_for_tke = .TRUE.
727	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
728	'use_sgs_for_particles = .TRUE.'
729	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
730	ENDIF
731
732	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
733	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
734	'curvature_solution_effects = .TRUE.'
735	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
736	ENDIF
737
738	!
739	!-- Set LOGICAL switches to enhance performance
740	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
741	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
742
743	!
744	!-- Timestep schemes:
745	SELECT CASE ( TRIM( timestep_scheme ) )
746
747	CASE ( 'euler' )
748	intermediate_timestep_count_max = 1
749
750	CASE ( 'runge-kutta-2' )
751	intermediate_timestep_count_max = 2
752
753	CASE ( 'runge-kutta-3' )
754	intermediate_timestep_count_max = 3
755
756	CASE DEFAULT
757	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
758	TRIM( timestep_scheme ) // '"'
759	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
760
761	END SELECT
762
763	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
764	.AND. timestep_scheme(1:5) == 'runge' ) THEN
765	message_string = 'momentum advection scheme "' // &
766	TRIM( momentum_advec ) // '" & does not work with ' // &
767	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
768	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
769	ENDIF
770
771	!
772	!-- Collision kernels:
773	SELECT CASE ( TRIM( collision_kernel ) )
774
775	CASE ( 'hall', 'hall_fast' )
776	hall_kernel = .TRUE.
777
778	CASE ( 'palm' )
779	palm_kernel = .TRUE.
780
781	CASE ( 'wang', 'wang_fast' )
782	wang_kernel = .TRUE.
783
784	CASE ( 'none' )
785
786
787	CASE DEFAULT
788	message_string = 'unknown collision kernel: collision_kernel = "' // &
789	TRIM( collision_kernel ) // '"'
790	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
791
792	END SELECT
793	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
794
795	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
796	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
797	!
798	!-- No restart run: several initialising actions are possible
799	action = initializing_actions
800	DO WHILE ( TRIM( action ) /= '' )
801	position = INDEX( action, ' ' )
802	SELECT CASE ( action(1:position-1) )
803
804	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
805	'by_user', 'initialize_vortex', 'initialize_ptanom' )
806	action = action(position+1:)
807
808	CASE DEFAULT
809	message_string = 'initializing_action = "' // &
810	TRIM( action ) // '" unkown or not allowed'
811	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
812
813	END SELECT
814	ENDDO
815	ENDIF
816
817	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
818	conserve_volume_flow ) THEN
819	message_string = 'initializing_actions = "initialize_vortex"' // &
820	' ist not allowed with conserve_volume_flow = .T.'
821	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
822	ENDIF
823
824
825	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
826	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
827	message_string = 'initializing_actions = "set_constant_profiles"' // &
828	' and "set_1d-model_profiles" are not allowed ' // &
829	'simultaneously'
830	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
831	ENDIF
832
833	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
834	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
835	message_string = 'initializing_actions = "set_constant_profiles"' // &
836	' and "by_user" are not allowed simultaneously'
837	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
838	ENDIF
839
840	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
841	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
842	message_string = 'initializing_actions = "by_user" and ' // &
843	'"set_1d-model_profiles" are not allowed simultaneously'
844	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
845	ENDIF
846
847	IF ( cloud_physics .AND. .NOT. humidity ) THEN
848	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
849	'not allowed with humidity = ', humidity
850	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
851	ENDIF
852
853	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
854	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
855	'not allowed with cloud_physics = ', cloud_physics
856	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
857	ENDIF
858
859	IF ( humidity .AND. sloping_surface ) THEN
860	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
861	'are not allowed simultaneously'
862	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
863	ENDIF
864
865	IF ( passive_scalar .AND. humidity ) THEN
866	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
867	'is not allowed simultaneously'
868	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
869	ENDIF
870
871	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
872	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
873	'coefficient & given value is drag_coefficient = 0.0'
874	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
875	ENDIF
876
877	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
878	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
879	' seifert_beheng'
880	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
881	ENDIF
882
883	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
884	icloud_scheme == 0 ) THEN
885	message_string = 'cloud_scheme = seifert_beheng requires ' // &
886	'loop_optimization = cache'
887	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
888	ENDIF
889
890	!
891	!-- In case of no model continuation run, check initialising parameters and
892	!-- deduce further quantities
893	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
894
895	!
896	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
897	pt_init = pt_surface
898	IF ( humidity ) THEN
899	q_init = q_surface
900	!
901	!-- It is not allowed to choose initial profiles of rain water content
902	!-- and rain drop concentration. They are set to 0.0.
903	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
904	qr_init = 0.0
905	nr_init = 0.0
906	ENDIF
907	ENDIF
908	IF ( ocean ) sa_init = sa_surface
909	IF ( passive_scalar ) q_init = s_surface
910	IF ( plant_canopy ) lad = 0.0
911
912	!
913	!--
914	!-- If required, compute initial profile of the geostrophic wind
915	!-- (component ug)
916	i = 1
917	gradient = 0.0
918
919	IF ( .NOT. ocean ) THEN
920
921	ug_vertical_gradient_level_ind(1) = 0
922	ug(0) = ug_surface
923	DO k = 1, nzt+1
924	IF ( i < 11 ) THEN
925	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
926	ug_vertical_gradient_level(i) >= 0.0 ) THEN
927	gradient = ug_vertical_gradient(i) / 100.0
928	ug_vertical_gradient_level_ind(i) = k - 1
929	i = i + 1
930	ENDIF
931	ENDIF
932	IF ( gradient /= 0.0 ) THEN
933	IF ( k /= 1 ) THEN
934	ug(k) = ug(k-1) + dzu(k) * gradient
935	ELSE
936	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
937	ENDIF
938	ELSE
939	ug(k) = ug(k-1)
940	ENDIF
941	ENDDO
942
943	ELSE
944
945	ug_vertical_gradient_level_ind(1) = nzt+1
946	ug(nzt+1) = ug_surface
947	DO k = nzt, nzb, -1
948	IF ( i < 11 ) THEN
949	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
950	ug_vertical_gradient_level(i) <= 0.0 ) THEN
951	gradient = ug_vertical_gradient(i) / 100.0
952	ug_vertical_gradient_level_ind(i) = k + 1
953	i = i + 1
954	ENDIF
955	ENDIF
956	IF ( gradient /= 0.0 ) THEN
957	IF ( k /= nzt ) THEN
958	ug(k) = ug(k+1) - dzu(k+1) * gradient
959	ELSE
960	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
961	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
962	ENDIF
963	ELSE
964	ug(k) = ug(k+1)
965	ENDIF
966	ENDDO
967
968	ENDIF
969
970	!
971	!-- In case of no given gradients for ug, choose a zero gradient
972	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
973	ug_vertical_gradient_level(1) = 0.0
974	ENDIF
975
976	!
977	!--
978	!-- If required, compute initial profile of the geostrophic wind
979	!-- (component vg)
980	i = 1
981	gradient = 0.0
982
983	IF ( .NOT. ocean ) THEN
984
985	vg_vertical_gradient_level_ind(1) = 0
986	vg(0) = vg_surface
987	DO k = 1, nzt+1
988	IF ( i < 11 ) THEN
989	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
990	vg_vertical_gradient_level(i) >= 0.0 ) THEN
991	gradient = vg_vertical_gradient(i) / 100.0
992	vg_vertical_gradient_level_ind(i) = k - 1
993	i = i + 1
994	ENDIF
995	ENDIF
996	IF ( gradient /= 0.0 ) THEN
997	IF ( k /= 1 ) THEN
998	vg(k) = vg(k-1) + dzu(k) * gradient
999	ELSE
1000	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
1001	ENDIF
1002	ELSE
1003	vg(k) = vg(k-1)
1004	ENDIF
1005	ENDDO
1006
1007	ELSE
1008
1009	vg_vertical_gradient_level_ind(1) = nzt+1
1010	vg(nzt+1) = vg_surface
1011	DO k = nzt, nzb, -1
1012	IF ( i < 11 ) THEN
1013	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
1014	vg_vertical_gradient_level(i) <= 0.0 ) THEN
1015	gradient = vg_vertical_gradient(i) / 100.0
1016	vg_vertical_gradient_level_ind(i) = k + 1
1017	i = i + 1
1018	ENDIF
1019	ENDIF
1020	IF ( gradient /= 0.0 ) THEN
1021	IF ( k /= nzt ) THEN
1022	vg(k) = vg(k+1) - dzu(k+1) * gradient
1023	ELSE
1024	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
1025	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
1026	ENDIF
1027	ELSE
1028	vg(k) = vg(k+1)
1029	ENDIF
1030	ENDDO
1031
1032	ENDIF
1033
1034	!
1035	!-- In case of no given gradients for vg, choose a zero gradient
1036	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
1037	vg_vertical_gradient_level(1) = 0.0
1038	ENDIF
1039
1040	!
1041	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1042	!-- interpolate them from wind profile data (if given)
1043	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
1044
1045	u_init = ug
1046	v_init = vg
1047
1048	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
1049
1050	IF ( uv_heights(1) /= 0.0 ) THEN
1051	message_string = 'uv_heights(1) must be 0.0'
1052	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1053	ENDIF
1054
1055	use_prescribed_profile_data = .TRUE.
1056
1057	kk = 1
1058	u_init(0) = 0.0
1059	v_init(0) = 0.0
1060
1061	DO k = 1, nz+1
1062
1063	IF ( kk < 100 ) THEN
1064	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1065	kk = kk + 1
1066	IF ( kk == 100 ) EXIT
1067	ENDDO
1068	ENDIF
1069
1070	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
1071	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1072	( uv_heights(kk+1) - uv_heights(kk) ) * &
1073	( u_profile(kk+1) - u_profile(kk) )
1074	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1075	( uv_heights(kk+1) - uv_heights(kk) ) * &
1076	( v_profile(kk+1) - v_profile(kk) )
1077	ELSE
1078	u_init(k) = u_profile(kk)
1079	v_init(k) = v_profile(kk)
1080	ENDIF
1081
1082	ENDDO
1083
1084	ELSE
1085
1086	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1087	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1088
1089	ENDIF
1090
1091	!
1092	!-- Compute initial temperature profile using the given temperature gradients
1093	IF ( .NOT. neutral ) THEN
1094
1095	i = 1
1096	gradient = 0.0
1097
1098	IF ( .NOT. ocean ) THEN
1099
1100	pt_vertical_gradient_level_ind(1) = 0
1101	DO k = 1, nzt+1
1102	IF ( i < 11 ) THEN
1103	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
1104	pt_vertical_gradient_level(i) >= 0.0 ) THEN
1105	gradient = pt_vertical_gradient(i) / 100.0
1106	pt_vertical_gradient_level_ind(i) = k - 1
1107	i = i + 1
1108	ENDIF
1109	ENDIF
1110	IF ( gradient /= 0.0 ) THEN
1111	IF ( k /= 1 ) THEN
1112	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
1113	ELSE
1114	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
1115	ENDIF
1116	ELSE
1117	pt_init(k) = pt_init(k-1)
1118	ENDIF
1119	ENDDO
1120
1121	ELSE
1122
1123	pt_vertical_gradient_level_ind(1) = nzt+1
1124	DO k = nzt, 0, -1
1125	IF ( i < 11 ) THEN
1126	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
1127	pt_vertical_gradient_level(i) <= 0.0 ) THEN
1128	gradient = pt_vertical_gradient(i) / 100.0
1129	pt_vertical_gradient_level_ind(i) = k + 1
1130	i = i + 1
1131	ENDIF
1132	ENDIF
1133	IF ( gradient /= 0.0 ) THEN
1134	IF ( k /= nzt ) THEN
1135	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
1136	ELSE
1137	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
1138	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
1139	ENDIF
1140	ELSE
1141	pt_init(k) = pt_init(k+1)
1142	ENDIF
1143	ENDDO
1144
1145	ENDIF
1146
1147	ENDIF
1148
1149	!
1150	!-- In case of no given temperature gradients, choose gradient of neutral
1151	!-- stratification
1152	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
1153	pt_vertical_gradient_level(1) = 0.0
1154	ENDIF
1155
1156	!
1157	!-- Store temperature gradient at the top boundary for possible Neumann
1158	!-- boundary condition
1159	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
1160
1161	!
1162	!-- If required, compute initial humidity or scalar profile using the given
1163	!-- humidity/scalar gradient. In case of scalar transport, initially store
1164	!-- values of the scalar parameters on humidity parameters
1165	IF ( passive_scalar ) THEN
1166	bc_q_b = bc_s_b
1167	bc_q_t = bc_s_t
1168	q_surface = s_surface
1169	q_surface_initial_change = s_surface_initial_change
1170	q_vertical_gradient = s_vertical_gradient
1171	q_vertical_gradient_level = s_vertical_gradient_level
1172	surface_waterflux = surface_scalarflux
1173	wall_humidityflux = wall_scalarflux
1174	ENDIF
1175
1176	IF ( humidity .OR. passive_scalar ) THEN
1177
1178	i = 1
1179	gradient = 0.0
1180	q_vertical_gradient_level_ind(1) = 0
1181	DO k = 1, nzt+1
1182	IF ( i < 11 ) THEN
1183	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
1184	q_vertical_gradient_level(i) >= 0.0 ) THEN
1185	gradient = q_vertical_gradient(i) / 100.0
1186	q_vertical_gradient_level_ind(i) = k - 1
1187	i = i + 1
1188	ENDIF
1189	ENDIF
1190	IF ( gradient /= 0.0 ) THEN
1191	IF ( k /= 1 ) THEN
1192	q_init(k) = q_init(k-1) + dzu(k) * gradient
1193	ELSE
1194	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
1195	ENDIF
1196	ELSE
1197	q_init(k) = q_init(k-1)
1198	ENDIF
1199	!
1200	!-- Avoid negative humidities
1201	IF ( q_init(k) < 0.0 ) THEN
1202	q_init(k) = 0.0
1203	ENDIF
1204	ENDDO
1205
1206	!
1207	!-- In case of no given humidity gradients, choose zero gradient
1208	!-- conditions
1209	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
1210	q_vertical_gradient_level(1) = 0.0
1211	ENDIF
1212
1213	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1214
1215	i = 1
1216	gradient = 0.0
1217	qr_vertical_gradient_level_ind(1) = 0
1218	DO k = 1, nzt+1
1219	IF ( i < 11 ) THEN
1220	IF ( qr_vertical_gradient_level(i) < zu(k) .AND. &
1221	qr_vertical_gradient_level(i) >= 0.0 ) THEN
1222	gradient = qr_vertical_gradient(i) / 100.0
1223	qr_vertical_gradient_level_ind(i) = k - 1
1224	i = i + 1
1225	ENDIF
1226	ENDIF
1227	IF ( gradient /= 0.0 ) THEN
1228	IF ( k /= 1 ) THEN
1229	qr_init(k) = qr_init(k-1) + dzu(k) * gradient
1230	ELSE
1231	qr_init(k) = qr_init(k-1) + 0.5 * dzu(k) * gradient
1232	ENDIF
1233	ELSE
1234	qr_init(k) = qr_init(k-1)
1235	ENDIF
1236	!
1237	!-- Avoid negative rain water content
1238	IF ( qr_init(k) < 0.0 ) THEN
1239	qr_init(k) = 0.0
1240	ENDIF
1241	ENDDO
1242	!
1243	!-- In case of no given rain water content gradients, choose zero gradient
1244	!-- conditions
1245	IF ( qr_vertical_gradient_level(1) == -1.0 ) THEN
1246	qr_vertical_gradient_level(1) = 0.0
1247	ENDIF
1248
1249	i = 1
1250	gradient = 0.0
1251	nr_vertical_gradient_level_ind(1) = 0
1252	DO k = 1, nzt+1
1253	IF ( i < 11 ) THEN
1254	IF ( nr_vertical_gradient_level(i) < zu(k) .AND. &
1255	nr_vertical_gradient_level(i) >= 0.0 ) THEN
1256	gradient = nr_vertical_gradient(i) / 100.0
1257	nr_vertical_gradient_level_ind(i) = k - 1
1258	i = i + 1
1259	ENDIF
1260	ENDIF
1261	IF ( gradient /= 0.0 ) THEN
1262	IF ( k /= 1 ) THEN
1263	nr_init(k) = nr_init(k-1) + dzu(k) * gradient
1264	ELSE
1265	nr_init(k) = nr_init(k-1) + 0.5 * dzu(k) * gradient
1266	ENDIF
1267	ELSE
1268	nr_init(k) = nr_init(k-1)
1269	ENDIF
1270	!
1271	!-- Avoid negative rain water content
1272	IF ( nr_init(k) < 0.0 ) THEN
1273	nr_init(k) = 0.0
1274	ENDIF
1275	ENDDO
1276	!
1277	!-- In case of no given rain water content gradients, choose zero gradient
1278	!-- conditions
1279	IF ( nr_vertical_gradient_level(1) == -1.0 ) THEN
1280	nr_vertical_gradient_level(1) = 0.0
1281	ENDIF
1282
1283	ENDIF
1284	!
1285	!-- Store humidity, rain water content and rain drop concentration
1286	!-- gradient at the top boundary for possile Neumann boundary condition
1287	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
1288
1289	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1290	bc_qr_t_val = ( qr_init(nzt+1) - qr_init(nzt) ) / dzu(nzt+1)
1291	bc_nr_t_val = ( nr_init(nzt+1) - nr_init(nzt) ) / dzu(nzt+1)
1292	ENDIF
1293
1294	ENDIF
1295
1296	!
1297	!-- If required, compute initial salinity profile using the given salinity
1298	!-- gradients
1299	IF ( ocean ) THEN
1300
1301	i = 1
1302	gradient = 0.0
1303
1304	sa_vertical_gradient_level_ind(1) = nzt+1
1305	DO k = nzt, 0, -1
1306	IF ( i < 11 ) THEN
1307	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
1308	sa_vertical_gradient_level(i) <= 0.0 ) THEN
1309	gradient = sa_vertical_gradient(i) / 100.0
1310	sa_vertical_gradient_level_ind(i) = k + 1
1311	i = i + 1
1312	ENDIF
1313	ENDIF
1314	IF ( gradient /= 0.0 ) THEN
1315	IF ( k /= nzt ) THEN
1316	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
1317	ELSE
1318	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
1319	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
1320	ENDIF
1321	ELSE
1322	sa_init(k) = sa_init(k+1)
1323	ENDIF
1324	ENDDO
1325
1326	ENDIF
1327
1328	!
1329	!-- If required compute the profile of leaf area density used in the plant
1330	!-- canopy model
1331	IF ( plant_canopy ) THEN
1332
1333	i = 1
1334	gradient = 0.0
1335
1336	IF ( .NOT. ocean ) THEN
1337
1338	lad(0) = lad_surface
1339
1340	lad_vertical_gradient_level_ind(1) = 0
1341	DO k = 1, pch_index
1342	IF ( i < 11 ) THEN
1343	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1344	lad_vertical_gradient_level(i) >= 0.0 ) THEN
1345	gradient = lad_vertical_gradient(i)
1346	lad_vertical_gradient_level_ind(i) = k - 1
1347	i = i + 1
1348	ENDIF
1349	ENDIF
1350	IF ( gradient /= 0.0 ) THEN
1351	IF ( k /= 1 ) THEN
1352	lad(k) = lad(k-1) + dzu(k) * gradient
1353	ELSE
1354	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
1355	ENDIF
1356	ELSE
1357	lad(k) = lad(k-1)
1358	ENDIF
1359	ENDDO
1360
1361	ENDIF
1362
1363	!
1364	!-- In case of no given leaf area density gradients, choose a vanishing
1365	!-- gradient
1366	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1367	lad_vertical_gradient_level(1) = 0.0
1368	ENDIF
1369
1370	ENDIF
1371
1372	ENDIF
1373
1374	!
1375	!-- Initialize large scale subsidence if required
1376	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1377	large_scale_subsidence = .TRUE.
1378	CALL init_w_subsidence
1379	END IF
1380
1381
1382
1383	!
1384	!-- Compute Coriolis parameter
1385	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1386	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1387
1388	!
1389	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1390	!-- set the reference temperature equal to the surface temperature.
1391	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1392
1393	!
1394	!-- Reference value has to be used in buoyancy terms
1395	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1396
1397	!
1398	!-- Sign of buoyancy/stability terms
1399	IF ( ocean ) atmos_ocean_sign = -1.0
1400
1401	!
1402	!-- Ocean version must use flux boundary conditions at the top
1403	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1404	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1405	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1406	ENDIF
1407
1408	!
1409	!-- In case of a given slope, compute the relevant quantities
1410	IF ( alpha_surface /= 0.0 ) THEN
1411	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1412	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1413	' ) must be < 90.0'
1414	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1415	ENDIF
1416	sloping_surface = .TRUE.
1417	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1418	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1419	ENDIF
1420
1421	!
1422	!-- Check time step and cfl_factor
1423	IF ( dt /= -1.0 ) THEN
1424	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1425	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1426	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1427	ENDIF
1428	dt_3d = dt
1429	dt_fixed = .TRUE.
1430	ENDIF
1431
1432	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1433	IF ( cfl_factor == -1.0 ) THEN
1434	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1435	cfl_factor = 0.8
1436	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1437	cfl_factor = 0.9
1438	ELSE
1439	cfl_factor = 0.9
1440	ENDIF
1441	ELSE
1442	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1443	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1444	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1445	ENDIF
1446	ENDIF
1447
1448	!
1449	!-- Store simulated time at begin
1450	simulated_time_at_begin = simulated_time
1451
1452	!
1453	!-- Store reference time for coupled runs and change the coupling flag,
1454	!-- if ...
1455	IF ( simulated_time == 0.0 ) THEN
1456	IF ( coupling_start_time == 0.0 ) THEN
1457	time_since_reference_point = 0.0
1458	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1459	run_coupled = .FALSE.
1460	ENDIF
1461	ENDIF
1462
1463	!
1464	!-- Set wind speed in the Galilei-transformed system
1465	IF ( galilei_transformation ) THEN
1466	IF ( use_ug_for_galilei_tr .AND. &
1467	ug_vertical_gradient_level(1) == 0.0 .AND. &
1468	ug_vertical_gradient(1) == 0.0 .AND. &
1469	vg_vertical_gradient_level(1) == 0.0 .AND. &
1470	vg_vertical_gradient(1) == 0.0 ) THEN
1471	u_gtrans = ug_surface * 0.6
1472	v_gtrans = vg_surface * 0.6
1473	ELSEIF ( use_ug_for_galilei_tr .AND. &
1474	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
1475	ug_vertical_gradient(1) /= 0.0 ) ) THEN
1476	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1477	' with galilei transformation'
1478	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1479	ELSEIF ( use_ug_for_galilei_tr .AND. &
1480	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
1481	vg_vertical_gradient(1) /= 0.0 ) ) THEN
1482	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1483	' with galilei transformation'
1484	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1485	ELSE
1486	message_string = 'variable translation speed used for galilei-' // &
1487	'transformation, which may cause & instabilities in stably ' // &
1488	'stratified regions'
1489	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1490	ENDIF
1491	ENDIF
1492
1493	!
1494	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1495	!-- fluxes have to be used in the diffusion-terms
1496	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1497
1498	!
1499	!-- Check boundary conditions and set internal variables:
1500	!-- Lateral boundary conditions
1501	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1502	bc_lr /= 'radiation/dirichlet' .AND. bc_lr /= 'dirichlet/neumann' &
1503	.AND. bc_lr /= 'neumann/dirichlet' ) THEN
1504	message_string = 'unknown boundary condition: bc_lr = "' // &
1505	TRIM( bc_lr ) // '"'
1506	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1507	ENDIF
1508	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1509	bc_ns /= 'radiation/dirichlet' .AND. bc_ns /= 'dirichlet/neumann' &
1510	.AND. bc_ns /= 'neumann/dirichlet' ) THEN
1511	message_string = 'unknown boundary condition: bc_ns = "' // &
1512	TRIM( bc_ns ) // '"'
1513	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1514	ENDIF
1515
1516	!
1517	!-- Internal variables used for speed optimization in if clauses
1518	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1519	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
1520	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
1521	IF ( bc_lr == 'dirichlet/neumann' ) bc_lr_dirneu = .TRUE.
1522	IF ( bc_lr == 'neumann/dirichlet' ) bc_lr_neudir = .TRUE.
1523	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1524	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
1525	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
1526	IF ( bc_ns == 'dirichlet/neumann' ) bc_ns_dirneu = .TRUE.
1527	IF ( bc_ns == 'neumann/dirichlet' ) bc_ns_neudir = .TRUE.
1528
1529	!
1530	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1531	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1532	!-- and tools do not work with non-cyclic boundary conditions.
1533	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1534	IF ( psolver /= 'multigrid' ) THEN
1535	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1536	'psolver = "' // TRIM( psolver ) // '"'
1537	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1538	ENDIF
1539	IF ( momentum_advec /= 'pw-scheme' .AND. &
1540	momentum_advec /= 'ws-scheme') THEN
1541	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1542	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1543	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1544	ENDIF
1545	IF ( scalar_advec /= 'pw-scheme' .AND. &
1546	scalar_advec /= 'ws-scheme' ) THEN
1547	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1548	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1549	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1550	ENDIF
1551	IF ( galilei_transformation ) THEN
1552	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1553	'galilei_transformation = .T.'
1554	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1555	ENDIF
1556	ENDIF
1557
1558	!
1559	!-- Bottom boundary condition for the turbulent Kinetic energy
1560	IF ( bc_e_b == 'neumann' ) THEN
1561	ibc_e_b = 1
1562	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1563	ibc_e_b = 2
1564	IF ( prandtl_layer ) THEN
1565	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
1566	TRIM( bc_e_b ) // '"'
1567	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1568	ENDIF
1569	IF ( .NOT. prandtl_layer ) THEN
1570	bc_e_b = 'neumann'
1571	ibc_e_b = 1
1572	message_string = 'boundary condition bc_e_b changed to "' // &
1573	TRIM( bc_e_b ) // '"'
1574	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1575	ENDIF
1576	ELSE
1577	message_string = 'unknown boundary condition: bc_e_b = "' // &
1578	TRIM( bc_e_b ) // '"'
1579	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1580	ENDIF
1581
1582	!
1583	!-- Boundary conditions for perturbation pressure
1584	IF ( bc_p_b == 'dirichlet' ) THEN
1585	ibc_p_b = 0
1586	ELSEIF ( bc_p_b == 'neumann' ) THEN
1587	ibc_p_b = 1
1588	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1589	ibc_p_b = 2
1590	ELSE
1591	message_string = 'unknown boundary condition: bc_p_b = "' // &
1592	TRIM( bc_p_b ) // '"'
1593	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1594	ENDIF
1595	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1596	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1597	'" not allowed with prandtl_layer = .FALSE.'
1598	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1599	ENDIF
1600	IF ( bc_p_t == 'dirichlet' ) THEN
1601	ibc_p_t = 0
1602	ELSEIF ( bc_p_t == 'neumann' ) THEN
1603	ibc_p_t = 1
1604	ELSE
1605	message_string = 'unknown boundary condition: bc_p_t = "' // &
1606	TRIM( bc_p_t ) // '"'
1607	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1608	ENDIF
1609
1610	!
1611	!-- Boundary conditions for potential temperature
1612	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1613	ibc_pt_b = 2
1614	ELSE
1615	IF ( bc_pt_b == 'dirichlet' ) THEN
1616	ibc_pt_b = 0
1617	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1618	ibc_pt_b = 1
1619	ELSE
1620	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1621	TRIM( bc_pt_b ) // '"'
1622	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1623	ENDIF
1624	ENDIF
1625
1626	IF ( bc_pt_t == 'dirichlet' ) THEN
1627	ibc_pt_t = 0
1628	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1629	ibc_pt_t = 1
1630	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1631	ibc_pt_t = 2
1632	ELSE
1633	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1634	TRIM( bc_pt_t ) // '"'
1635	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1636	ENDIF
1637
1638	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1639	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1640
1641	IF ( neutral ) THEN
1642
1643	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
1644	THEN
1645	message_string = 'heatflux must not be set for pure neutral flow'
1646	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1647	ENDIF
1648
1649	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
1650	THEN
1651	message_string = 'heatflux must not be set for pure neutral flow'
1652	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1653	ENDIF
1654
1655	ENDIF
1656
1657	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1658	top_momentumflux_v /= 9999999.9 ) THEN
1659	constant_top_momentumflux = .TRUE.
1660	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1661	top_momentumflux_v == 9999999.9 ) ) THEN
1662	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1663	'must be set'
1664	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1665	ENDIF
1666
1667	!
1668	!-- A given surface temperature implies Dirichlet boundary condition for
1669	!-- temperature. In this case specification of a constant heat flux is
1670	!-- forbidden.
1671	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1672	surface_heatflux /= 0.0 ) THEN
1673	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1674	'& is not allowed with constant_heatflux = .TRUE.'
1675	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1676	ENDIF
1677	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1678	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1679	'wed with pt_surface_initial_change (/=0) = ', &
1680	pt_surface_initial_change
1681	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1682	ENDIF
1683
1684	!
1685	!-- A given temperature at the top implies Dirichlet boundary condition for
1686	!-- temperature. In this case specification of a constant heat flux is
1687	!-- forbidden.
1688	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1689	top_heatflux /= 0.0 ) THEN
1690	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1691	'" is not allowed with constant_top_heatflux = .TRUE.'
1692	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1693	ENDIF
1694
1695	!
1696	!-- Boundary conditions for salinity
1697	IF ( ocean ) THEN
1698	IF ( bc_sa_t == 'dirichlet' ) THEN
1699	ibc_sa_t = 0
1700	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1701	ibc_sa_t = 1
1702	ELSE
1703	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1704	TRIM( bc_sa_t ) // '"'
1705	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1706	ENDIF
1707
1708	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1709	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1710	message_string = 'boundary condition: bc_sa_t = "' // &
1711	TRIM( bc_sa_t ) // '" requires to set ' // &
1712	'top_salinityflux'
1713	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1714	ENDIF
1715
1716	!
1717	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1718	!-- salinity. In this case specification of a constant salinity flux is
1719	!-- forbidden.
1720	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1721	top_salinityflux /= 0.0 ) THEN
1722	message_string = 'boundary condition: bc_sa_t = "' // &
1723	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1724	'constant_top_salinityflux = .TRUE.'
1725	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1726	ENDIF
1727
1728	ENDIF
1729
1730	!
1731	!-- In case of humidity or passive scalar, set boundary conditions for total
1732	!-- water content / scalar
1733	IF ( humidity .OR. passive_scalar ) THEN
1734	IF ( humidity ) THEN
1735	sq = 'q'
1736	ELSE
1737	sq = 's'
1738	ENDIF
1739	IF ( bc_q_b == 'dirichlet' ) THEN
1740	ibc_q_b = 0
1741	ELSEIF ( bc_q_b == 'neumann' ) THEN
1742	ibc_q_b = 1
1743	ELSE
1744	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1745	'_b ="' // TRIM( bc_q_b ) // '"'
1746	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1747	ENDIF
1748	IF ( bc_q_t == 'dirichlet' ) THEN
1749	ibc_q_t = 0
1750	ELSEIF ( bc_q_t == 'neumann' ) THEN
1751	ibc_q_t = 1
1752	ELSE
1753	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1754	'_t ="' // TRIM( bc_q_t ) // '"'
1755	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1756	ENDIF
1757
1758	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1759
1760	!
1761	!-- A given surface humidity implies Dirichlet boundary condition for
1762	!-- humidity. In this case specification of a constant water flux is
1763	!-- forbidden.
1764	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1765	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1766	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1767	'th prescribed surface flux'
1768	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1769	ENDIF
1770	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1771	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1772	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1773	q_surface_initial_change
1774	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1775	ENDIF
1776
1777	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
1778	IF ( bc_qr_b == 'dirichlet' ) THEN
1779	ibc_qr_b = 0
1780	ELSEIF ( bc_qr_b == 'neumann' ) THEN
1781	ibc_qr_b = 1
1782	ELSE
1783	message_string = 'unknown boundary condition: bc_qr_b ="' // &
1784	TRIM( bc_qr_b ) // '"'
1785	CALL message( 'check_parameters', 'PA0352', 1, 2, 0, 6, 0 )
1786	ENDIF
1787	IF ( bc_qr_t == 'dirichlet' ) THEN
1788	ibc_qr_t = 0
1789	ELSEIF ( bc_qr_t == 'neumann' ) THEN
1790	ibc_qr_t = 1
1791	ELSE
1792	message_string = 'unknown boundary condition: bc_qr_t ="' // &
1793	TRIM( bc_qr_t ) // '"'
1794	CALL message( 'check_parameters', 'PA0353', 1, 2, 0, 6, 0 )
1795	ENDIF
1796	IF ( bc_nr_b == 'dirichlet' ) THEN
1797	ibc_nr_b = 0
1798	ELSEIF ( bc_nr_b == 'neumann' ) THEN
1799	ibc_nr_b = 1
1800	ELSE
1801	message_string = 'unknown boundary condition: bc_nr_b ="' // &
1802	TRIM( bc_nr_b ) // '"'
1803	CALL message( 'check_parameters', 'PA0355', 1, 2, 0, 6, 0 )
1804	ENDIF
1805	IF ( bc_nr_t == 'dirichlet' ) THEN
1806	ibc_nr_t = 0
1807	ELSEIF ( bc_nr_t == 'neumann' ) THEN
1808	ibc_nr_t = 1
1809	ELSE
1810	message_string = 'unknown boundary condition: bc_nr_t ="' // &
1811	TRIM( bc_nr_t ) // '"'
1812	CALL message( 'check_parameters', 'PA0356', 1, 2, 0, 6, 0 )
1813	ENDIF
1814	ENDIF
1815
1816	ENDIF
1817
1818	!
1819	!-- Boundary conditions for horizontal components of wind speed
1820	IF ( bc_uv_b == 'dirichlet' ) THEN
1821	ibc_uv_b = 0
1822	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1823	ibc_uv_b = 1
1824	IF ( prandtl_layer ) THEN
1825	message_string = 'boundary condition: bc_uv_b = "' // &
1826	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1827	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1828	ENDIF
1829	ELSE
1830	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1831	TRIM( bc_uv_b ) // '"'
1832	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1833	ENDIF
1834	!
1835	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1836	!-- assigned with the u and v values of the ocean surface
1837	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1838	ibc_uv_b = 2
1839	ENDIF
1840
1841	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1842	bc_uv_t = 'neumann'
1843	ibc_uv_t = 1
1844	ELSE
1845	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1846	ibc_uv_t = 0
1847	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1848	!
1849	!-- Velocities for the initial u,v-profiles are set zero at the top
1850	!-- in case of dirichlet_0 conditions
1851	u_init(nzt+1) = 0.0
1852	v_init(nzt+1) = 0.0
1853	ENDIF
1854	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1855	ibc_uv_t = 1
1856	ELSE
1857	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1858	TRIM( bc_uv_t ) // '"'
1859	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1860	ENDIF
1861	ENDIF
1862
1863	!
1864	!-- Compute and check, respectively, the Rayleigh Damping parameter
1865	IF ( rayleigh_damping_factor == -1.0 ) THEN
1866	rayleigh_damping_factor = 0.0
1867	ELSE
1868	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1869	THEN
1870	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1871	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1872	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1873	ENDIF
1874	ENDIF
1875
1876	IF ( rayleigh_damping_height == -1.0 ) THEN
1877	IF ( .NOT. ocean ) THEN
1878	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1879	ELSE
1880	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1881	ENDIF
1882	ELSE
1883	IF ( .NOT. ocean ) THEN
1884	IF ( rayleigh_damping_height < 0.0 .OR. &
1885	rayleigh_damping_height > zu(nzt) ) THEN
1886	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1887	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1888	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1889	ENDIF
1890	ELSE
1891	IF ( rayleigh_damping_height > 0.0 .OR. &
1892	rayleigh_damping_height < zu(nzb) ) THEN
1893	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1894	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1895	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1896	ENDIF
1897	ENDIF
1898	ENDIF
1899
1900	!
1901	!-- Check number of chosen statistic regions. More than 10 regions are not
1902	!-- allowed, because so far no more than 10 corresponding output files can
1903	!-- be opened (cf. check_open)
1904	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1905	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1906	statistic_regions+1, ' but only 10 regions are allowed'
1907	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1908	ENDIF
1909	IF ( normalizing_region > statistic_regions .OR. &
1910	normalizing_region < 0) THEN
1911	WRITE ( message_string, * ) 'normalizing_region = ', &
1912	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1913	' (value of statistic_regions)'
1914	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1915	ENDIF
1916
1917	!
1918	!-- Check the interval for sorting particles.
1919	!-- Using particles as cloud droplets requires sorting after each timestep.
1920	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1921	dt_sort_particles = 0.0
1922	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1923	'_droplets = .TRUE.'
1924	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1925	ENDIF
1926
1927	!
1928	!-- Set the default intervals for data output, if necessary
1929	!-- NOTE: dt_dosp has already been set in package_parin
1930	IF ( dt_data_output /= 9999999.9 ) THEN
1931	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1932	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1933	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1934	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1935	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1936	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1937	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1938	DO mid = 1, max_masks
1939	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1940	ENDDO
1941	ENDIF
1942
1943	!
1944	!-- Set the default skip time intervals for data output, if necessary
1945	IF ( skip_time_dopr == 9999999.9 ) &
1946	skip_time_dopr = skip_time_data_output
1947	IF ( skip_time_dosp == 9999999.9 ) &
1948	skip_time_dosp = skip_time_data_output
1949	IF ( skip_time_do2d_xy == 9999999.9 ) &
1950	skip_time_do2d_xy = skip_time_data_output
1951	IF ( skip_time_do2d_xz == 9999999.9 ) &
1952	skip_time_do2d_xz = skip_time_data_output
1953	IF ( skip_time_do2d_yz == 9999999.9 ) &
1954	skip_time_do2d_yz = skip_time_data_output
1955	IF ( skip_time_do3d == 9999999.9 ) &
1956	skip_time_do3d = skip_time_data_output
1957	IF ( skip_time_data_output_av == 9999999.9 ) &
1958	skip_time_data_output_av = skip_time_data_output
1959	DO mid = 1, max_masks
1960	IF ( skip_time_domask(mid) == 9999999.9 ) &
1961	skip_time_domask(mid) = skip_time_data_output
1962	ENDDO
1963
1964	!
1965	!-- Check the average intervals (first for 3d-data, then for profiles and
1966	!-- spectra)
1967	IF ( averaging_interval > dt_data_output_av ) THEN
1968	WRITE( message_string, * ) 'averaging_interval = ', &
1969	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1970	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1971	ENDIF
1972
1973	IF ( averaging_interval_pr == 9999999.9 ) THEN
1974	averaging_interval_pr = averaging_interval
1975	ENDIF
1976
1977	IF ( averaging_interval_pr > dt_dopr ) THEN
1978	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1979	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1980	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1981	ENDIF
1982
1983	IF ( averaging_interval_sp == 9999999.9 ) THEN
1984	averaging_interval_sp = averaging_interval
1985	ENDIF
1986
1987	IF ( averaging_interval_sp > dt_dosp ) THEN
1988	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1989	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1990	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1991	ENDIF
1992
1993	!
1994	!-- Set the default interval for profiles entering the temporal average
1995	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1996	dt_averaging_input_pr = dt_averaging_input
1997	ENDIF
1998
1999	!
2000	!-- Set the default interval for the output of timeseries to a reasonable
2001	!-- value (tries to minimize the number of calls of flow_statistics)
2002	IF ( dt_dots == 9999999.9 ) THEN
2003	IF ( averaging_interval_pr == 0.0 ) THEN
2004	dt_dots = MIN( dt_run_control, dt_dopr )
2005	ELSE
2006	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
2007	ENDIF
2008	ENDIF
2009
2010	!
2011	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
2012	IF ( dt_averaging_input > averaging_interval ) THEN
2013	WRITE( message_string, * ) 'dt_averaging_input = ', &
2014	dt_averaging_input, ' must be <= averaging_interval = ', &
2015	averaging_interval
2016	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
2017	ENDIF
2018
2019	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
2020	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
2021	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
2022	averaging_interval_pr
2023	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
2024	ENDIF
2025
2026	!
2027	!-- Set the default value for the integration interval of precipitation amount
2028	IF ( precipitation ) THEN
2029	IF ( precipitation_amount_interval == 9999999.9 ) THEN
2030	precipitation_amount_interval = dt_do2d_xy
2031	ELSE
2032	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
2033	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
2034	precipitation_amount_interval, ' must not be larger than ', &
2035	'dt_do2d_xy = ', dt_do2d_xy
2036	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
2037	ENDIF
2038	ENDIF
2039	ENDIF
2040
2041	!
2042	!-- Determine the number of output profiles and check whether they are
2043	!-- permissible
2044	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
2045
2046	dopr_n = dopr_n + 1
2047	i = dopr_n
2048
2049	!
2050	!-- Determine internal profile number (for hom, homs)
2051	!-- and store height levels
2052	SELECT CASE ( TRIM( data_output_pr(i) ) )
2053
2054	CASE ( 'u', '#u' )
2055	dopr_index(i) = 1
2056	dopr_unit(i) = 'm/s'
2057	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
2058	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2059	dopr_initial_index(i) = 5
2060	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
2061	data_output_pr(i) = data_output_pr(i)(2:)
2062	ENDIF
2063
2064	CASE ( 'v', '#v' )
2065	dopr_index(i) = 2
2066	dopr_unit(i) = 'm/s'
2067	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
2068	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2069	dopr_initial_index(i) = 6
2070	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
2071	data_output_pr(i) = data_output_pr(i)(2:)
2072	ENDIF
2073
2074	CASE ( 'w' )
2075	dopr_index(i) = 3
2076	dopr_unit(i) = 'm/s'
2077	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
2078
2079	CASE ( 'pt', '#pt' )
2080	IF ( .NOT. cloud_physics ) THEN
2081	dopr_index(i) = 4
2082	dopr_unit(i) = 'K'
2083	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2084	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2085	dopr_initial_index(i) = 7
2086	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2087	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
2088	data_output_pr(i) = data_output_pr(i)(2:)
2089	ENDIF
2090	ELSE
2091	dopr_index(i) = 43
2092	dopr_unit(i) = 'K'
2093	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
2094	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2095	dopr_initial_index(i) = 28
2096	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
2097	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
2098	data_output_pr(i) = data_output_pr(i)(2:)
2099	ENDIF
2100	ENDIF
2101
2102	CASE ( 'e' )
2103	dopr_index(i) = 8
2104	dopr_unit(i) = 'm2/s2'
2105	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
2106	hom(nzb,2,8,:) = 0.0
2107
2108	CASE ( 'km', '#km' )
2109	dopr_index(i) = 9
2110	dopr_unit(i) = 'm2/s'
2111	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
2112	hom(nzb,2,9,:) = 0.0
2113	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2114	dopr_initial_index(i) = 23
2115	hom(:,2,23,:) = hom(:,2,9,:)
2116	data_output_pr(i) = data_output_pr(i)(2:)
2117	ENDIF
2118
2119	CASE ( 'kh', '#kh' )
2120	dopr_index(i) = 10
2121	dopr_unit(i) = 'm2/s'
2122	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
2123	hom(nzb,2,10,:) = 0.0
2124	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2125	dopr_initial_index(i) = 24
2126	hom(:,2,24,:) = hom(:,2,10,:)
2127	data_output_pr(i) = data_output_pr(i)(2:)
2128	ENDIF
2129
2130	CASE ( 'l', '#l' )
2131	dopr_index(i) = 11
2132	dopr_unit(i) = 'm'
2133	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
2134	hom(nzb,2,11,:) = 0.0
2135	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2136	dopr_initial_index(i) = 25
2137	hom(:,2,25,:) = hom(:,2,11,:)
2138	data_output_pr(i) = data_output_pr(i)(2:)
2139	ENDIF
2140
2141	CASE ( 'w"u"' )
2142	dopr_index(i) = 12
2143	dopr_unit(i) = 'm2/s2'
2144	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
2145	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
2146
2147	CASE ( 'wu' )
2148	dopr_index(i) = 13
2149	dopr_unit(i) = 'm2/s2'
2150	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
2151
2152	CASE ( 'w"v"' )
2153	dopr_index(i) = 14
2154	dopr_unit(i) = 'm2/s2'
2155	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
2156	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
2157
2158	CASE ( 'wv' )
2159	dopr_index(i) = 15
2160	dopr_unit(i) = 'm2/s2'
2161	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
2162
2163	CASE ( 'w"pt"' )
2164	dopr_index(i) = 16
2165	dopr_unit(i) = 'K m/s'
2166	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
2167
2168	CASE ( 'wpt' )
2169	dopr_index(i) = 17
2170	dopr_unit(i) = 'K m/s'
2171	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
2172
2173	CASE ( 'wpt' )
2174	dopr_index(i) = 18
2175	dopr_unit(i) = 'K m/s'
2176	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
2177
2178	CASE ( 'wu' )
2179	dopr_index(i) = 19
2180	dopr_unit(i) = 'm2/s2'
2181	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
2182	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
2183
2184	CASE ( 'wv' )
2185	dopr_index(i) = 20
2186	dopr_unit(i) = 'm2/s2'
2187	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
2188	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
2189
2190	CASE ( 'wptBC' )
2191	dopr_index(i) = 21
2192	dopr_unit(i) = 'K m/s'
2193	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
2194
2195	CASE ( 'wptBC' )
2196	dopr_index(i) = 22
2197	dopr_unit(i) = 'K m/s'
2198	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
2199
2200	CASE ( 'sa', '#sa' )
2201	IF ( .NOT. ocean ) THEN
2202	message_string = 'data_output_pr = ' // &
2203	TRIM( data_output_pr(i) ) // ' is not imp' // &
2204	'lemented for ocean = .FALSE.'
2205	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2206	ELSE
2207	dopr_index(i) = 23
2208	dopr_unit(i) = 'psu'
2209	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
2210	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2211	dopr_initial_index(i) = 26
2212	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2213	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2214	data_output_pr(i) = data_output_pr(i)(2:)
2215	ENDIF
2216	ENDIF
2217
2218	CASE ( 'u*2' )
2219	dopr_index(i) = 30
2220	dopr_unit(i) = 'm2/s2'
2221	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
2222
2223	CASE ( 'v*2' )
2224	dopr_index(i) = 31
2225	dopr_unit(i) = 'm2/s2'
2226	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
2227
2228	CASE ( 'w*2' )
2229	dopr_index(i) = 32
2230	dopr_unit(i) = 'm2/s2'
2231	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
2232
2233	CASE ( 'pt*2' )
2234	dopr_index(i) = 33
2235	dopr_unit(i) = 'K2'
2236	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
2237
2238	CASE ( 'e*' )
2239	dopr_index(i) = 34
2240	dopr_unit(i) = 'm2/s2'
2241	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
2242
2243	CASE ( 'w2pt' )
2244	dopr_index(i) = 35
2245	dopr_unit(i) = 'K m2/s2'
2246	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
2247
2248	CASE ( 'wpt2' )
2249	dopr_index(i) = 36
2250	dopr_unit(i) = 'K2 m/s'
2251	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
2252
2253	CASE ( 'we' )
2254	dopr_index(i) = 37
2255	dopr_unit(i) = 'm3/s3'
2256	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
2257
2258	CASE ( 'w*3' )
2259	dopr_index(i) = 38
2260	dopr_unit(i) = 'm3/s3'
2261	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
2262
2263	CASE ( 'Sw' )
2264	dopr_index(i) = 39
2265	dopr_unit(i) = 'none'
2266	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
2267
2268	CASE ( 'p' )
2269	dopr_index(i) = 40
2270	dopr_unit(i) = 'Pa'
2271	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
2272
2273	CASE ( 'q', '#q' )
2274	IF ( .NOT. humidity ) THEN
2275	message_string = 'data_output_pr = ' // &
2276	TRIM( data_output_pr(i) ) // ' is not imp' // &
2277	'lemented for humidity = .FALSE.'
2278	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2279	ELSE
2280	dopr_index(i) = 41
2281	dopr_unit(i) = 'kg/kg'
2282	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2283	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2284	dopr_initial_index(i) = 26
2285	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2286	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2287	data_output_pr(i) = data_output_pr(i)(2:)
2288	ENDIF
2289	ENDIF
2290
2291	CASE ( 's', '#s' )
2292	IF ( .NOT. passive_scalar ) THEN
2293	message_string = 'data_output_pr = ' // &
2294	TRIM( data_output_pr(i) ) // ' is not imp' // &
2295	'lemented for passive_scalar = .FALSE.'
2296	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2297	ELSE
2298	dopr_index(i) = 41
2299	dopr_unit(i) = 'kg/m3'
2300	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2301	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2302	dopr_initial_index(i) = 26
2303	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2304	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2305	data_output_pr(i) = data_output_pr(i)(2:)
2306	ENDIF
2307	ENDIF
2308
2309	CASE ( 'qv', '#qv' )
2310	IF ( .NOT. cloud_physics ) THEN
2311	dopr_index(i) = 41
2312	dopr_unit(i) = 'kg/kg'
2313	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
2314	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2315	dopr_initial_index(i) = 26
2316	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
2317	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
2318	data_output_pr(i) = data_output_pr(i)(2:)
2319	ENDIF
2320	ELSE
2321	dopr_index(i) = 42
2322	dopr_unit(i) = 'kg/kg'
2323	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
2324	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2325	dopr_initial_index(i) = 27
2326	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
2327	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
2328	data_output_pr(i) = data_output_pr(i)(2:)
2329	ENDIF
2330	ENDIF
2331
2332	CASE ( 'lpt', '#lpt' )
2333	IF ( .NOT. cloud_physics ) THEN
2334	message_string = 'data_output_pr = ' // &
2335	TRIM( data_output_pr(i) ) // ' is not imp' // &
2336	'lemented for cloud_physics = .FALSE.'
2337	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2338	ELSE
2339	dopr_index(i) = 4
2340	dopr_unit(i) = 'K'
2341	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
2342	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2343	dopr_initial_index(i) = 7
2344	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
2345	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
2346	data_output_pr(i) = data_output_pr(i)(2:)
2347	ENDIF
2348	ENDIF
2349
2350	CASE ( 'vpt', '#vpt' )
2351	dopr_index(i) = 44
2352	dopr_unit(i) = 'K'
2353	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2354	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2355	dopr_initial_index(i) = 29
2356	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2357	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
2358	data_output_pr(i) = data_output_pr(i)(2:)
2359	ENDIF
2360
2361	CASE ( 'w"vpt"' )
2362	dopr_index(i) = 45
2363	dopr_unit(i) = 'K m/s'
2364	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2365
2366	CASE ( 'wvpt' )
2367	dopr_index(i) = 46
2368	dopr_unit(i) = 'K m/s'
2369	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2370
2371	CASE ( 'wvpt' )
2372	dopr_index(i) = 47
2373	dopr_unit(i) = 'K m/s'
2374	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2375
2376	CASE ( 'w"q"' )
2377	IF ( .NOT. humidity ) THEN
2378	message_string = 'data_output_pr = ' // &
2379	TRIM( data_output_pr(i) ) // ' is not imp' // &
2380	'lemented for humidity = .FALSE.'
2381	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2382	ELSE
2383	dopr_index(i) = 48
2384	dopr_unit(i) = 'kg/kg m/s'
2385	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2386	ENDIF
2387
2388	CASE ( 'wq' )
2389	IF ( .NOT. humidity ) THEN
2390	message_string = 'data_output_pr = ' // &
2391	TRIM( data_output_pr(i) ) // ' is not imp' // &
2392	'lemented for humidity = .FALSE.'
2393	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2394	ELSE
2395	dopr_index(i) = 49
2396	dopr_unit(i) = 'kg/kg m/s'
2397	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2398	ENDIF
2399
2400	CASE ( 'wq' )
2401	IF ( .NOT. humidity ) THEN
2402	message_string = 'data_output_pr = ' // &
2403	TRIM( data_output_pr(i) ) // ' is not imp' // &
2404	'lemented for humidity = .FALSE.'
2405	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2406	ELSE
2407	dopr_index(i) = 50
2408	dopr_unit(i) = 'kg/kg m/s'
2409	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2410	ENDIF
2411
2412	CASE ( 'w"s"' )
2413	IF ( .NOT. passive_scalar ) THEN
2414	message_string = 'data_output_pr = ' // &
2415	TRIM( data_output_pr(i) ) // ' is not imp' // &
2416	'lemented for passive_scalar = .FALSE.'
2417	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2418	ELSE
2419	dopr_index(i) = 48
2420	dopr_unit(i) = 'kg/m3 m/s'
2421	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2422	ENDIF
2423
2424	CASE ( 'ws' )
2425	IF ( .NOT. passive_scalar ) THEN
2426	message_string = 'data_output_pr = ' // &
2427	TRIM( data_output_pr(i) ) // ' is not imp' // &
2428	'lemented for passive_scalar = .FALSE.'
2429	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2430	ELSE
2431	dopr_index(i) = 49
2432	dopr_unit(i) = 'kg/m3 m/s'
2433	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2434	ENDIF
2435
2436	CASE ( 'ws' )
2437	IF ( .NOT. passive_scalar ) THEN
2438	message_string = 'data_output_pr = ' // &
2439	TRIM( data_output_pr(i) ) // ' is not imp' // &
2440	'lemented for passive_scalar = .FALSE.'
2441	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2442	ELSE
2443	dopr_index(i) = 50
2444	dopr_unit(i) = 'kg/m3 m/s'
2445	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2446	ENDIF
2447
2448	CASE ( 'w"qv"' )
2449	IF ( humidity .AND. .NOT. cloud_physics ) &
2450	THEN
2451	dopr_index(i) = 48
2452	dopr_unit(i) = 'kg/kg m/s'
2453	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2454	ELSEIF( humidity .AND. cloud_physics ) THEN
2455	dopr_index(i) = 51
2456	dopr_unit(i) = 'kg/kg m/s'
2457	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2458	ELSE
2459	message_string = 'data_output_pr = ' // &
2460	TRIM( data_output_pr(i) ) // ' is not imp' // &
2461	'lemented for cloud_physics = .FALSE. an&' // &
2462	'd humidity = .FALSE.'
2463	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2464	ENDIF
2465
2466	CASE ( 'wqv' )
2467	IF ( humidity .AND. .NOT. cloud_physics ) &
2468	THEN
2469	dopr_index(i) = 49
2470	dopr_unit(i) = 'kg/kg m/s'
2471	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2472	ELSEIF( humidity .AND. cloud_physics ) THEN
2473	dopr_index(i) = 52
2474	dopr_unit(i) = 'kg/kg m/s'
2475	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2476	ELSE
2477	message_string = 'data_output_pr = ' // &
2478	TRIM( data_output_pr(i) ) // ' is not imp' // &
2479	'lemented for cloud_physics = .FALSE. an&' // &
2480	'd humidity = .FALSE.'
2481	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2482	ENDIF
2483
2484	CASE ( 'wqv' )
2485	IF ( humidity .AND. .NOT. cloud_physics ) &
2486	THEN
2487	dopr_index(i) = 50
2488	dopr_unit(i) = 'kg/kg m/s'
2489	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2490	ELSEIF( humidity .AND. cloud_physics ) THEN
2491	dopr_index(i) = 53
2492	dopr_unit(i) = 'kg/kg m/s'
2493	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2494	ELSE
2495	message_string = 'data_output_pr = ' // &
2496	TRIM( data_output_pr(i) ) // ' is not imp' // &
2497	'lemented for cloud_physics = .FALSE. an&' // &
2498	'd humidity = .FALSE.'
2499	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2500	ENDIF
2501
2502	CASE ( 'ql' )
2503	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2504	message_string = 'data_output_pr = ' // &
2505	TRIM( data_output_pr(i) ) // ' is not imp' // &
2506	'lemented for cloud_physics = .FALSE. or' // &
2507	'&cloud_droplets = .FALSE.'
2508	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2509	ELSE
2510	dopr_index(i) = 54
2511	dopr_unit(i) = 'kg/kg'
2512	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2513	ENDIF
2514
2515	CASE ( 'wuu*:dz' )
2516	dopr_index(i) = 55
2517	dopr_unit(i) = 'm2/s3'
2518	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2519
2520	CASE ( 'wp:dz' )
2521	dopr_index(i) = 56
2522	dopr_unit(i) = 'm2/s3'
2523	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2524
2525	CASE ( 'w"e:dz' )
2526	dopr_index(i) = 57
2527	dopr_unit(i) = 'm2/s3'
2528	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2529
2530
2531	CASE ( 'u"pt"' )
2532	dopr_index(i) = 58
2533	dopr_unit(i) = 'K m/s'
2534	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2535
2536	CASE ( 'upt' )
2537	dopr_index(i) = 59
2538	dopr_unit(i) = 'K m/s'
2539	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2540
2541	CASE ( 'upt_t' )
2542	dopr_index(i) = 60
2543	dopr_unit(i) = 'K m/s'
2544	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2545
2546	CASE ( 'v"pt"' )
2547	dopr_index(i) = 61
2548	dopr_unit(i) = 'K m/s'
2549	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2550
2551	CASE ( 'vpt' )
2552	dopr_index(i) = 62
2553	dopr_unit(i) = 'K m/s'
2554	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2555
2556	CASE ( 'vpt_t' )
2557	dopr_index(i) = 63
2558	dopr_unit(i) = 'K m/s'
2559	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2560
2561	CASE ( 'rho' )
2562	IF ( .NOT. ocean ) THEN
2563	message_string = 'data_output_pr = ' // &
2564	TRIM( data_output_pr(i) ) // ' is not imp' // &
2565	'lemented for ocean = .FALSE.'
2566	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2567	ELSE
2568	dopr_index(i) = 64
2569	dopr_unit(i) = 'kg/m3'
2570	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2571	ENDIF
2572
2573	CASE ( 'w"sa"' )
2574	IF ( .NOT. ocean ) THEN
2575	message_string = 'data_output_pr = ' // &
2576	TRIM( data_output_pr(i) ) // ' is not imp' // &
2577	'lemented for ocean = .FALSE.'
2578	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2579	ELSE
2580	dopr_index(i) = 65
2581	dopr_unit(i) = 'psu m/s'
2582	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2583	ENDIF
2584
2585	CASE ( 'wsa' )
2586	IF ( .NOT. ocean ) THEN
2587	message_string = 'data_output_pr = ' // &
2588	TRIM( data_output_pr(i) ) // ' is not imp' // &
2589	'lemented for ocean = .FALSE.'
2590	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2591	ELSE
2592	dopr_index(i) = 66
2593	dopr_unit(i) = 'psu m/s'
2594	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2595	ENDIF
2596
2597	CASE ( 'wsa' )
2598	IF ( .NOT. ocean ) THEN
2599	message_string = 'data_output_pr = ' // &
2600	TRIM( data_output_pr(i) ) // ' is not imp' // &
2601	'lemented for ocean = .FALSE.'
2602	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2603	ELSE
2604	dopr_index(i) = 67
2605	dopr_unit(i) = 'psu m/s'
2606	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2607	ENDIF
2608
2609	CASE ( 'wp' )
2610	dopr_index(i) = 68
2611	dopr_unit(i) = 'm3/s3'
2612	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2613
2614	CASE ( 'w"e' )
2615	dopr_index(i) = 69
2616	dopr_unit(i) = 'm3/s3'
2617	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2618
2619	CASE ( 'q*2' )
2620	IF ( .NOT. humidity ) THEN
2621	message_string = 'data_output_pr = ' // &
2622	TRIM( data_output_pr(i) ) // ' is not imp' // &
2623	'lemented for humidity = .FALSE.'
2624	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2625	ELSE
2626	dopr_index(i) = 70
2627	dopr_unit(i) = 'kg2/kg2'
2628	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2629	ENDIF
2630
2631	CASE ( 'prho' )
2632	IF ( .NOT. ocean ) THEN
2633	message_string = 'data_output_pr = ' // &
2634	TRIM( data_output_pr(i) ) // ' is not imp' // &
2635	'lemented for ocean = .FALSE.'
2636	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2637	ELSE
2638	dopr_index(i) = 71
2639	dopr_unit(i) = 'kg/m3'
2640	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2641	ENDIF
2642
2643	CASE ( 'hyp' )
2644	dopr_index(i) = 72
2645	dopr_unit(i) = 'dbar'
2646	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2647
2648	CASE ( 'nr' )
2649	IF ( .NOT. cloud_physics ) THEN
2650	message_string = 'data_output_pr = ' // &
2651	TRIM( data_output_pr(i) ) // ' is not imp' // &
2652	'lemented for cloud_physics = .FALSE.'
2653	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2654	ELSEIF ( icloud_scheme /= 0 ) THEN
2655	message_string = 'data_output_pr = ' // &
2656	TRIM( data_output_pr(i) ) // ' is not imp' // &
2657	'lemented for cloud_scheme /= seifert_beheng'
2658	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2659	ELSE
2660	dopr_index(i) = 73
2661	dopr_unit(i) = '1/m3'
2662	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
2663	ENDIF
2664
2665	CASE ( 'qr' )
2666	IF ( .NOT. cloud_physics ) THEN
2667	message_string = 'data_output_pr = ' // &
2668	TRIM( data_output_pr(i) ) // ' is not imp' // &
2669	'lemented for cloud_physics = .FALSE.'
2670	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2671	ELSEIF ( icloud_scheme /= 0 ) THEN
2672	message_string = 'data_output_pr = ' // &
2673	TRIM( data_output_pr(i) ) // ' is not imp' // &
2674	'lemented for cloud_scheme /= seifert_beheng'
2675	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2676	ELSE
2677	dopr_index(i) = 74
2678	dopr_unit(i) = 'kg/kg'
2679	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
2680	ENDIF
2681
2682	CASE ( 'qc' )
2683	IF ( .NOT. cloud_physics ) THEN
2684	message_string = 'data_output_pr = ' // &
2685	TRIM( data_output_pr(i) ) // ' is not imp' // &
2686	'lemented for cloud_physics = .FALSE.'
2687	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2688	ELSEIF ( icloud_scheme /= 0 ) THEN
2689	message_string = 'data_output_pr = ' // &
2690	TRIM( data_output_pr(i) ) // ' is not imp' // &
2691	'lemented for cloud_scheme /= seifert_beheng'
2692	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2693	ELSE
2694	dopr_index(i) = 75
2695	dopr_unit(i) = 'kg/kg'
2696	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
2697	ENDIF
2698
2699	CASE ( 'prr' )
2700	IF ( .NOT. cloud_physics ) THEN
2701	message_string = 'data_output_pr = ' // &
2702	TRIM( data_output_pr(i) ) // ' is not imp' // &
2703	'lemented for cloud_physics = .FALSE.'
2704	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
2705	ELSEIF ( icloud_scheme /= 0 ) THEN
2706	message_string = 'data_output_pr = ' // &
2707	TRIM( data_output_pr(i) ) // ' is not imp' // &
2708	'lemented for cloud_scheme /= seifert_beheng'
2709	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
2710	ELSEIF ( .NOT. precipitation ) THEN
2711	message_string = 'data_output_pr = ' // &
2712	TRIM( data_output_pr(i) ) // ' is not imp' // &
2713	'lemented for precipitation = .FALSE.'
2714	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2715
2716	ELSE
2717	dopr_index(i) = 76
2718	dopr_unit(i) = 'kg/kg m/s'
2719	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
2720	ENDIF
2721
2722	CASE DEFAULT
2723
2724	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2725
2726	IF ( unit == 'illegal' ) THEN
2727	IF ( data_output_pr_user(1) /= ' ' ) THEN
2728	message_string = 'illegal value for data_output_pr or ' // &
2729	'data_output_pr_user = "' // &
2730	TRIM( data_output_pr(i) ) // '"'
2731	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2732	ELSE
2733	message_string = 'illegal value for data_output_pr = "' // &
2734	TRIM( data_output_pr(i) ) // '"'
2735	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2736	ENDIF
2737	ENDIF
2738
2739	END SELECT
2740
2741	ENDDO
2742
2743
2744	!
2745	!-- Append user-defined data output variables to the standard data output
2746	IF ( data_output_user(1) /= ' ' ) THEN
2747	i = 1
2748	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2749	i = i + 1
2750	ENDDO
2751	j = 1
2752	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2753	IF ( i > 100 ) THEN
2754	message_string = 'number of output quantitities given by data' // &
2755	'_output and data_output_user exceeds the limit of 100'
2756	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2757	ENDIF
2758	data_output(i) = data_output_user(j)
2759	i = i + 1
2760	j = j + 1
2761	ENDDO
2762	ENDIF
2763
2764	!
2765	!-- Check and set steering parameters for 2d/3d data output and averaging
2766	i = 1
2767	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2768	!
2769	!-- Check for data averaging
2770	ilen = LEN_TRIM( data_output(i) )
2771	j = 0 ! no data averaging
2772	IF ( ilen > 3 ) THEN
2773	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2774	j = 1 ! data averaging
2775	data_output(i) = data_output(i)(1:ilen-3)
2776	ENDIF
2777	ENDIF
2778	!
2779	!-- Check for cross section or volume data
2780	ilen = LEN_TRIM( data_output(i) )
2781	k = 0 ! 3d data
2782	var = data_output(i)(1:ilen)
2783	IF ( ilen > 3 ) THEN
2784	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2785	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2786	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2787	k = 1 ! 2d data
2788	var = data_output(i)(1:ilen-3)
2789	ENDIF
2790	ENDIF
2791	!
2792	!-- Check for allowed value and set units
2793	SELECT CASE ( TRIM( var ) )
2794
2795	CASE ( 'e' )
2796	IF ( constant_diffusion ) THEN
2797	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2798	'res constant_diffusion = .FALSE.'
2799	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2800	ENDIF
2801	unit = 'm2/s2'
2802
2803	CASE ( 'lpt' )
2804	IF ( .NOT. cloud_physics ) THEN
2805	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2806	'res cloud_physics = .TRUE.'
2807	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2808	ENDIF
2809	unit = 'K'
2810
2811	CASE ( 'nr' )
2812	IF ( .NOT. cloud_physics ) THEN
2813	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2814	'res cloud_physics = .TRUE.'
2815	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2816	ELSEIF ( icloud_scheme /= 0 ) THEN
2817	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2818	'res cloud_scheme = seifert_beheng'
2819	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2820	ENDIF
2821	unit = '1/m3'
2822
2823	CASE ( 'pc', 'pr' )
2824	IF ( .NOT. particle_advection ) THEN
2825	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2826	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2827	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2828	ENDIF
2829	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2830	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2831
2832	CASE ( 'prr' )
2833	IF ( .NOT. cloud_physics ) THEN
2834	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2835	'res cloud_physics = .TRUE.'
2836	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2837	ELSEIF ( icloud_scheme /= 0 ) THEN
2838	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2839	'res cloud_scheme = seifert_beheng'
2840	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2841	ELSEIF ( .NOT. precipitation ) THEN
2842	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2843	'res precipitation = .TRUE.'
2844	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2845	ENDIF
2846	unit = 'kg/kg m/s'
2847
2848	CASE ( 'q', 'vpt' )
2849	IF ( .NOT. humidity ) THEN
2850	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2851	'res humidity = .TRUE.'
2852	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2853	ENDIF
2854	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2855	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2856
2857	CASE ( 'qc' )
2858	IF ( .NOT. cloud_physics ) THEN
2859	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2860	'res cloud_physics = .TRUE.'
2861	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2862	ELSEIF ( icloud_scheme /= 0 ) THEN
2863	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2864	'res cloud_scheme = seifert_beheng'
2865	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2866	ENDIF
2867	unit = 'kg/kg'
2868
2869	CASE ( 'ql' )
2870	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2871	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2872	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2873	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2874	ENDIF
2875	unit = 'kg/kg'
2876
2877	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2878	IF ( .NOT. cloud_droplets ) THEN
2879	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2880	'res cloud_droplets = .TRUE.'
2881	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2882	ENDIF
2883	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2884	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2885	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2886
2887	CASE ( 'qr' )
2888	IF ( .NOT. cloud_physics ) THEN
2889	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2890	'res cloud_physics = .TRUE.'
2891	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2892	ELSEIF ( icloud_scheme /= 0 ) THEN
2893	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2894	'res cloud_scheme = seifert_beheng'
2895	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
2896	ENDIF
2897	unit = 'kg/kg'
2898
2899	CASE ( 'qv' )
2900	IF ( .NOT. cloud_physics ) THEN
2901	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2902	'res cloud_physics = .TRUE.'
2903	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2904	ENDIF
2905	unit = 'kg/kg'
2906
2907	CASE ( 'rho' )
2908	IF ( .NOT. ocean ) THEN
2909	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2910	'res ocean = .TRUE.'
2911	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2912	ENDIF
2913	unit = 'kg/m3'
2914
2915	CASE ( 's' )
2916	IF ( .NOT. passive_scalar ) THEN
2917	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2918	'res passive_scalar = .TRUE.'
2919	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2920	ENDIF
2921	unit = 'conc'
2922
2923	CASE ( 'sa' )
2924	IF ( .NOT. ocean ) THEN
2925	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2926	'res ocean = .TRUE.'
2927	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2928	ENDIF
2929	unit = 'psu'
2930
2931	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
2932	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2933	message_string = 'illegal value for data_output: "' // &
2934	TRIM( var ) // '" & only 2d-horizontal ' // &
2935	'cross sections are allowed for this value'
2936	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2937	ENDIF
2938	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2939	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2940	'res cloud_physics = .TRUE.'
2941	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2942	ENDIF
2943	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2944	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2945	'res precipitation = .TRUE.'
2946	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2947	ENDIF
2948	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2949	message_string = 'temporal averaging of precipitation ' // &
2950	'amount "' // TRIM( var ) // '" is not possible'
2951	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2952	ENDIF
2953	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2954	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2955	'res precipitation = .TRUE.'
2956	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2957	ENDIF
2958	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2959	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2960	'res humidity = .TRUE.'
2961	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2962	ENDIF
2963
2964	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2965	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2966	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2967	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2968	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2969	IF ( TRIM( var ) == 't*' ) unit = 'K'
2970	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2971	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2972	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2973
2974
2975	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2976	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2977	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2978	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2979	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2980	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2981	CONTINUE
2982
2983	CASE DEFAULT
2984	CALL user_check_data_output( var, unit )
2985
2986	IF ( unit == 'illegal' ) THEN
2987	IF ( data_output_user(1) /= ' ' ) THEN
2988	message_string = 'illegal value for data_output or ' // &
2989	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2990	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2991	ELSE
2992	message_string = 'illegal value for data_output =' // &
2993	TRIM( data_output(i) ) // '"'
2994	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2995	ENDIF
2996	ENDIF
2997
2998	END SELECT
2999	!
3000	!-- Set the internal steering parameters appropriately
3001	IF ( k == 0 ) THEN
3002	do3d_no(j) = do3d_no(j) + 1
3003	do3d(j,do3d_no(j)) = data_output(i)
3004	do3d_unit(j,do3d_no(j)) = unit
3005	ELSE
3006	do2d_no(j) = do2d_no(j) + 1
3007	do2d(j,do2d_no(j)) = data_output(i)
3008	do2d_unit(j,do2d_no(j)) = unit
3009	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
3010	data_output_xy(j) = .TRUE.
3011	ENDIF
3012	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
3013	data_output_xz(j) = .TRUE.
3014	ENDIF
3015	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
3016	data_output_yz(j) = .TRUE.
3017	ENDIF
3018	ENDIF
3019
3020	IF ( j == 1 ) THEN
3021	!
3022	!-- Check, if variable is already subject to averaging
3023	found = .FALSE.
3024	DO k = 1, doav_n
3025	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
3026	ENDDO
3027
3028	IF ( .NOT. found ) THEN
3029	doav_n = doav_n + 1
3030	doav(doav_n) = var
3031	ENDIF
3032	ENDIF
3033
3034	i = i + 1
3035	ENDDO
3036
3037	!
3038	!-- Averaged 2d or 3d output requires that an averaging interval has been set
3039	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
3040	WRITE( message_string, * ) 'output of averaged quantity "', &
3041	TRIM( doav(1) ), '_av" requires to set a ', &
3042	'non-zero & averaging interval'
3043	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
3044	ENDIF
3045
3046	!
3047	!-- Check sectional planes and store them in one shared array
3048	IF ( ANY( section_xy > nz + 1 ) ) THEN
3049	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
3050	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
3051	ENDIF
3052	IF ( ANY( section_xz > ny + 1 ) ) THEN
3053	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
3054	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
3055	ENDIF
3056	IF ( ANY( section_yz > nx + 1 ) ) THEN
3057	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
3058	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
3059	ENDIF
3060	section(:,1) = section_xy
3061	section(:,2) = section_xz
3062	section(:,3) = section_yz
3063
3064	!
3065	!-- Upper plot limit for 2D vertical sections
3066	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
3067	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
3068	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
3069	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
3070	' (zu(nzt))'
3071	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
3072	ENDIF
3073
3074	!
3075	!-- Upper plot limit for 3D arrays
3076	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
3077
3078	!
3079	!-- Determine and check accuracy for compressed 3D plot output
3080	IF ( do3d_compress ) THEN
3081	!
3082	!-- Compression only permissible on T3E machines
3083	IF ( host(1:3) /= 't3e' ) THEN
3084	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
3085	TRIM( host ) // '"'
3086	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
3087	ENDIF
3088
3089	i = 1
3090	DO WHILE ( do3d_comp_prec(i) /= ' ' )
3091
3092	ilen = LEN_TRIM( do3d_comp_prec(i) )
3093	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
3094	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
3095	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
3096	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
3097	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
3098	ENDIF
3099
3100	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
3101	var = do3d_comp_prec(i)(1:ilen-1)
3102
3103	SELECT CASE ( var )
3104
3105	CASE ( 'u' )
3106	j = 1
3107	CASE ( 'v' )
3108	j = 2
3109	CASE ( 'w' )
3110	j = 3
3111	CASE ( 'p' )
3112	j = 4
3113	CASE ( 'pt' )
3114	j = 5
3115
3116	CASE DEFAULT
3117	WRITE( message_string, * ) 'unknown variable "', &
3118	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
3119	i, ')'
3120	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
3121
3122	END SELECT
3123
3124	plot_3d_precision(j)%precision = prec
3125	i = i + 1
3126
3127	ENDDO
3128	ENDIF
3129
3130	!
3131	!-- Check the data output format(s)
3132	IF ( data_output_format(1) == ' ' ) THEN
3133	!
3134	!-- Default value
3135	netcdf_output = .TRUE.
3136	ELSE
3137	i = 1
3138	DO WHILE ( data_output_format(i) /= ' ' )
3139
3140	SELECT CASE ( data_output_format(i) )
3141
3142	CASE ( 'netcdf' )
3143	netcdf_output = .TRUE.
3144	CASE ( 'iso2d' )
3145	iso2d_output = .TRUE.
3146	CASE ( 'avs' )
3147	avs_output = .TRUE.
3148
3149	CASE DEFAULT
3150	message_string = 'unknown value for data_output_format "' // &
3151	TRIM( data_output_format(i) ) // '"'
3152	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
3153
3154	END SELECT
3155
3156	i = i + 1
3157	IF ( i > 10 ) EXIT
3158
3159	ENDDO
3160	ENDIF
3161
3162	!
3163	!-- Set output format string (used in header)
3164	IF ( netcdf_output ) THEN
3165
3166	SELECT CASE ( netcdf_data_format )
3167	CASE ( 1 )
3168	output_format_netcdf = 'netCDF classic'
3169	CASE ( 2 )
3170	output_format_netcdf = 'netCDF 64bit offset'
3171	CASE ( 3 )
3172	output_format_netcdf = 'netCDF4/HDF5'
3173	CASE ( 4 )
3174	output_format_netcdf = 'netCDF4/HDF5 classic'
3175	CASE ( 5 )
3176	output_format_netcdf = 'parallel netCDF4/HDF5'
3177	CASE ( 6 )
3178	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
3179
3180	END SELECT
3181
3182	ENDIF
3183
3184	!
3185	!-- Check mask conditions
3186	DO mid = 1, max_masks
3187	IF ( data_output_masks(mid,1) /= ' ' .OR. &
3188	data_output_masks_user(mid,1) /= ' ' ) THEN
3189	masks = masks + 1
3190	ENDIF
3191	ENDDO
3192
3193	IF ( masks < 0 .OR. masks > max_masks ) THEN
3194	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
3195	'<= ', max_masks, ' (=max_masks)'
3196	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
3197	ENDIF
3198	IF ( masks > 0 ) THEN
3199	mask_scale(1) = mask_scale_x
3200	mask_scale(2) = mask_scale_y
3201	mask_scale(3) = mask_scale_z
3202	IF ( ANY( mask_scale <= 0.0 ) ) THEN
3203	WRITE( message_string, * ) &
3204	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
3205	'must be > 0.0'
3206	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
3207	ENDIF
3208	!
3209	!-- Generate masks for masked data output
3210	CALL init_masks
3211	ENDIF
3212
3213	!
3214	!-- Check the NetCDF data format
3215	#if ! defined ( __check )
3216	IF ( netcdf_data_format > 2 ) THEN
3217	#if defined( __netcdf4 )
3218	CONTINUE
3219	#else
3220	message_string = 'netCDF: netCDF4 format requested but no ' // &
3221	'cpp-directive __netcdf4 given & switch ' // &
3222	'back to 64-bit offset format'
3223	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
3224	netcdf_data_format = 2
3225	#endif
3226	ENDIF
3227	IF ( netcdf_data_format > 4 ) THEN
3228	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
3229	CONTINUE
3230	#else
3231	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
3232	'cpp-directive __netcdf4_parallel given & switch ' // &
3233	'back to netCDF4 non-parallel output'
3234	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
3235	netcdf_data_format = netcdf_data_format - 2
3236	#endif
3237	ENDIF
3238	#endif
3239
3240	#if ! defined( __check )
3241	!
3242	!-- Check netcdf precison
3243	ldum = .FALSE.
3244	CALL define_netcdf_header( 'ch', ldum, 0 )
3245	#endif
3246	!
3247	!-- Check, whether a constant diffusion coefficient shall be used
3248	IF ( km_constant /= -1.0 ) THEN
3249	IF ( km_constant < 0.0 ) THEN
3250	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
3251	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
3252	ELSE
3253	IF ( prandtl_number < 0.0 ) THEN
3254	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
3255	' < 0.0'
3256	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
3257	ENDIF
3258	constant_diffusion = .TRUE.
3259
3260	IF ( prandtl_layer ) THEN
3261	message_string = 'prandtl_layer is not allowed with fixed ' // &
3262	'value of km'
3263	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
3264	ENDIF
3265	ENDIF
3266	ENDIF
3267
3268	!
3269	!-- In case of non-cyclic lateral boundaries and a damping layer for the
3270	!-- potential temperature, check the width of the damping layer
3271	IF ( bc_lr /= 'cyclic' ) THEN
3272	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
3273	message_string = 'pt_damping_width out of range'
3274	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3275	ENDIF
3276	ENDIF
3277
3278	IF ( bc_ns /= 'cyclic' ) THEN
3279	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
3280	message_string = 'pt_damping_width out of range'
3281	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
3282	ENDIF
3283	ENDIF
3284
3285	!
3286	!-- Check value range for rif
3287	IF ( rif_min >= rif_max ) THEN
3288	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
3289	'than rif_max = ', rif_max
3290	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
3291	ENDIF
3292
3293	!
3294	!-- Determine upper and lower hight level indices for random perturbations
3295	IF ( disturbance_level_b == -9999999.9 ) THEN
3296	IF ( ocean ) THEN
3297	disturbance_level_b = zu((nzt*2)/3)
3298	disturbance_level_ind_b = ( nzt * 2 ) / 3
3299	ELSE
3300	disturbance_level_b = zu(nzb+3)
3301	disturbance_level_ind_b = nzb + 3
3302	ENDIF
3303	ELSEIF ( disturbance_level_b < zu(3) ) THEN
3304	WRITE( message_string, * ) 'disturbance_level_b = ', &
3305	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
3306	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
3307	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
3308	WRITE( message_string, * ) 'disturbance_level_b = ', &
3309	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3310	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
3311	ELSE
3312	DO k = 3, nzt-2
3313	IF ( disturbance_level_b <= zu(k) ) THEN
3314	disturbance_level_ind_b = k
3315	EXIT
3316	ENDIF
3317	ENDDO
3318	ENDIF
3319
3320	IF ( disturbance_level_t == -9999999.9 ) THEN
3321	IF ( ocean ) THEN
3322	disturbance_level_t = zu(nzt-3)
3323	disturbance_level_ind_t = nzt - 3
3324	ELSE
3325	disturbance_level_t = zu(nzt/3)
3326	disturbance_level_ind_t = nzt / 3
3327	ENDIF
3328	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
3329	WRITE( message_string, * ) 'disturbance_level_t = ', &
3330	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
3331	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
3332	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
3333	WRITE( message_string, * ) 'disturbance_level_t = ', &
3334	disturbance_level_t, ' must be >= disturbance_level_b = ', &
3335	disturbance_level_b
3336	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
3337	ELSE
3338	DO k = 3, nzt-2
3339	IF ( disturbance_level_t <= zu(k) ) THEN
3340	disturbance_level_ind_t = k
3341	EXIT
3342	ENDIF
3343	ENDDO
3344	ENDIF
3345
3346	!
3347	!-- Check again whether the levels determined this way are ok.
3348	!-- Error may occur at automatic determination and too few grid points in
3349	!-- z-direction.
3350	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
3351	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
3352	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
3353	disturbance_level_b
3354	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
3355	ENDIF
3356
3357	!
3358	!-- Determine the horizontal index range for random perturbations.
3359	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
3360	!-- near the inflow and the perturbation area is further limited to ...(1)
3361	!-- after the initial phase of the flow.
3362	dist_nxl = 0; dist_nxr = nx
3363	dist_nys = 0; dist_nyn = ny
3364	IF ( bc_lr /= 'cyclic' ) THEN
3365	IF ( inflow_disturbance_begin == -1 ) THEN
3366	inflow_disturbance_begin = MIN( 10, nx/2 )
3367	ENDIF
3368	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
3369	THEN
3370	message_string = 'inflow_disturbance_begin out of range'
3371	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3372	ENDIF
3373	IF ( inflow_disturbance_end == -1 ) THEN
3374	inflow_disturbance_end = MIN( 100, 3*nx/4 )
3375	ENDIF
3376	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
3377	THEN
3378	message_string = 'inflow_disturbance_end out of range'
3379	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3380	ENDIF
3381	ELSEIF ( bc_ns /= 'cyclic' ) THEN
3382	IF ( inflow_disturbance_begin == -1 ) THEN
3383	inflow_disturbance_begin = MIN( 10, ny/2 )
3384	ENDIF
3385	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
3386	THEN
3387	message_string = 'inflow_disturbance_begin out of range'
3388	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
3389	ENDIF
3390	IF ( inflow_disturbance_end == -1 ) THEN
3391	inflow_disturbance_end = MIN( 100, 3*ny/4 )
3392	ENDIF
3393	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
3394	THEN
3395	message_string = 'inflow_disturbance_end out of range'
3396	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
3397	ENDIF
3398	ENDIF
3399
3400	IF ( bc_lr == 'radiation/dirichlet' .OR. bc_lr == 'neumann/dirichlet' ) THEN
3401	dist_nxr = nx - inflow_disturbance_begin
3402	dist_nxl(1) = nx - inflow_disturbance_end
3403	ELSEIF ( bc_lr == 'dirichlet/radiation' .OR. bc_lr == 'dirichlet/neumann' ) THEN
3404	dist_nxl = inflow_disturbance_begin
3405	dist_nxr(1) = inflow_disturbance_end
3406	ENDIF
3407	IF ( bc_ns == 'dirichlet/radiation' .OR. bc_ns == 'dirichlet/neumann' ) THEN
3408	dist_nyn = ny - inflow_disturbance_begin
3409	dist_nys(1) = ny - inflow_disturbance_end
3410	ELSEIF ( bc_ns == 'radiation/dirichlet' .OR. bc_ns == 'neumann/dirichlet' ) THEN
3411	dist_nys = inflow_disturbance_begin
3412	dist_nyn(1) = inflow_disturbance_end
3413	ENDIF
3414
3415	!
3416	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
3417	!-- boundary (so far, a turbulent inflow is realized from the left side only)
3418	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' .AND. bc_lr /= 'dirichlet/neumann' ) THEN
3419	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
3420	'condition at the inflow boundary'
3421	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
3422	ENDIF
3423
3424	!
3425	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
3426	!-- data from prerun
3427	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' ) THEN
3428	message_string = 'turbulent_inflow = .T. requires ' // &
3429	'initializing_actions = ''cyclic_fill'' '
3430	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3431	ENDIF
3432
3433	!
3434	!-- In case of turbulent inflow calculate the index of the recycling plane
3435	IF ( turbulent_inflow ) THEN
3436	IF ( recycling_width == 9999999.9 ) THEN
3437	!
3438	!-- Set the default value for the width of the recycling domain
3439	recycling_width = 0.1 * nx * dx
3440	ELSE
3441	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
3442	WRITE( message_string, * ) 'illegal value for recycling_width:', &
3443	' ', recycling_width
3444	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3445	ENDIF
3446	ENDIF
3447	!
3448	!-- Calculate the index
3449	recycling_plane = recycling_width / dx
3450	ENDIF
3451
3452	!
3453	!-- Check random generator
3454	IF ( random_generator /= 'system-specific' .AND. &
3455	random_generator /= 'numerical-recipes' ) THEN
3456	message_string = 'unknown random generator: random_generator = "' // &
3457	TRIM( random_generator ) // '"'
3458	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
3459	ENDIF
3460
3461	!
3462	!-- Determine damping level index for 1D model
3463	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3464	IF ( damp_level_1d == -1.0 ) THEN
3465	damp_level_1d = zu(nzt+1)
3466	damp_level_ind_1d = nzt + 1
3467	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
3468	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3469	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
3470	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3471	ELSE
3472	DO k = 1, nzt+1
3473	IF ( damp_level_1d <= zu(k) ) THEN
3474	damp_level_ind_1d = k
3475	EXIT
3476	ENDIF
3477	ENDDO
3478	ENDIF
3479	ENDIF
3480
3481	!
3482	!-- Check some other 1d-model parameters
3483	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3484	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3485	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3486	'" is unknown'
3487	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3488	ENDIF
3489	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3490	TRIM( dissipation_1d ) /= 'detering' ) THEN
3491	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3492	'" is unknown'
3493	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3494	ENDIF
3495
3496	!
3497	!-- Set time for the next user defined restart (time_restart is the
3498	!-- internal parameter for steering restart events)
3499	IF ( restart_time /= 9999999.9 ) THEN
3500	IF ( restart_time > time_since_reference_point ) THEN
3501	time_restart = restart_time
3502	ENDIF
3503	ELSE
3504	!
3505	!-- In case of a restart run, set internal parameter to default (no restart)
3506	!-- if the NAMELIST-parameter restart_time is omitted
3507	time_restart = 9999999.9
3508	ENDIF
3509
3510	!
3511	!-- Set default value of the time needed to terminate a model run
3512	IF ( termination_time_needed == -1.0 ) THEN
3513	IF ( host(1:3) == 'ibm' ) THEN
3514	termination_time_needed = 300.0
3515	ELSE
3516	termination_time_needed = 35.0
3517	ENDIF
3518	ENDIF
3519
3520	!
3521	!-- Check the time needed to terminate a model run
3522	IF ( host(1:3) == 't3e' ) THEN
3523	!
3524	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3525	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3526	IF ( termination_time_needed <= 30.0 ) THEN
3527	WRITE( message_string, * ) 'termination_time_needed = ', &
3528	termination_time_needed, ' must be > 30.0 on host "', &
3529	TRIM( host ), '"'
3530	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3531	ENDIF
3532	ELSEIF ( host(1:3) == 'ibm' ) THEN
3533	!
3534	!-- On IBM-regatta machines the time should be at least 300 seconds,
3535	!-- because the job time consumed before executing palm (for compiling,
3536	!-- copying of files, etc.) has to be regarded
3537	IF ( termination_time_needed < 300.0 ) THEN
3538	WRITE( message_string, * ) 'termination_time_needed = ', &
3539	termination_time_needed, ' should be >= 300.0 on host "', &
3540	TRIM( host ), '"'
3541	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3542	ENDIF
3543	ENDIF
3544
3545	!
3546	!-- Check pressure gradient conditions
3547	IF ( dp_external .AND. conserve_volume_flow ) THEN
3548	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3549	'w are .TRUE. but one of them must be .FALSE.'
3550	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3551	ENDIF
3552	IF ( dp_external ) THEN
3553	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3554	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3555	' of range'
3556	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3557	ENDIF
3558	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3559	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3560	'ro, i.e. the external pressure gradient & will not be applied'
3561	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3562	ENDIF
3563	ENDIF
3564	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3565	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3566	'.FALSE., i.e. the external pressure gradient & will not be applied'
3567	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3568	ENDIF
3569	IF ( conserve_volume_flow ) THEN
3570	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3571
3572	conserve_volume_flow_mode = 'initial_profiles'
3573
3574	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3575	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3576	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3577	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3578	conserve_volume_flow_mode
3579	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3580	ENDIF
3581	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3582	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3583	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3584	'require conserve_volume_flow_mode = ''initial_profiles'''
3585	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3586	ENDIF
3587	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3588	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3589	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3590	'require conserve_volume_flow_mode = ''initial_profiles''', &
3591	' or ''bulk_velocity'''
3592	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3593	ENDIF
3594	ENDIF
3595	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3596	( .NOT. conserve_volume_flow .OR. &
3597	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3598	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3599	'conserve_volume_flow = .T. and ', &
3600	'conserve_volume_flow_mode = ''bulk_velocity'''
3601	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3602	ENDIF
3603
3604	!
3605	!-- Check particle attributes
3606	IF ( particle_color /= 'none' ) THEN
3607	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3608	particle_color /= 'z' ) THEN
3609	message_string = 'illegal value for parameter particle_color: ' // &
3610	TRIM( particle_color)
3611	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3612	ELSE
3613	IF ( color_interval(2) <= color_interval(1) ) THEN
3614	message_string = 'color_interval(2) <= color_interval(1)'
3615	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3616	ENDIF
3617	ENDIF
3618	ENDIF
3619
3620	IF ( particle_dvrpsize /= 'none' ) THEN
3621	IF ( particle_dvrpsize /= 'absw' ) THEN
3622	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3623	' ' // TRIM( particle_color)
3624	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3625	ELSE
3626	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3627	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3628	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3629	ENDIF
3630	ENDIF
3631	ENDIF
3632
3633	!
3634	!-- Check &userpar parameters
3635	CALL user_check_parameters
3636
3637
3638
3639	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |