Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 948

Last change on this file since 948 was 941, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 132.7 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[667]	6	!
[941]	7	!
[668]	8	! Former revisions:
	9	! -----------------
[708]	10	! $Id: check_parameters.f90 941 2012-07-09 14:50:21Z maronga $
[687]	11	!
[941]	12	! 940 2012-07-09 14:31:00Z raasch
	13	! checks for parameter neutral
	14	!
[925]	15	! 924 2012-06-06 07:44:41Z maronga
	16	! Bugfix: preprocessor directives caused error during compilation
	17	!
[893]	18	! 892 2012-05-02 13:51:44Z maronga
	19	! Bugfix for parameter file check ( excluding __netcdf4 )
	20	!
[867]	21	! 866 2012-03-28 06:44:41Z raasch
	22	! use only 60% of the geostrophic wind as translation speed in case of Galilean
	23	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
	24	! timestep
	25	!
[863]	26	! 861 2012-03-26 14:18:34Z suehring
	27	! Check for topography and ws-scheme removed.
	28	! Check for loop_optimization = 'vector' and ws-scheme removed.
	29	!
[846]	30	! 845 2012-03-07 10:23:05Z maronga
	31	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	32	!
[829]	33	! 828 2012-02-21 12:00:36Z raasch
	34	! check of collision_kernel extended
	35	!
[826]	36	! 825 2012-02-19 03:03:44Z raasch
	37	! check for collision_kernel and curvature_solution_effects
	38	!
[810]	39	! 809 2012-01-30 13:32:58Z maronga
	40	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	41	!
[808]	42	! 807 2012-01-25 11:53:51Z maronga
	43	! New cpp directive "__check" implemented which is used by check_namelist_files
	44	!
[775]	45	! 774 2011-10-27 13:34:16Z letzel
	46	! bugfix for prescribed u,v-profiles
	47	!
[768]	48	! 767 2011-10-14 06:39:12Z raasch
	49	! Calculating u,v-profiles from given profiles by linear interpolation.
	50	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	51	!
[708]	52	! 707 2011-03-29 11:39:40Z raasch
	53	! setting of bc_lr/ns_dirrad/raddir
	54	!
	55	! 689 2011-02-20 19:31:12z gryschka
[690]	56	! Bugfix for some logical expressions
	57	! (syntax was not compatible with all compilers)
[687]	58	!
[690]	59	! 680 2011-02-04 23:16:06Z gryschka
[681]	60	! init_vortex is not allowed with volume_flow_control
[668]	61	!
[674]	62	! 673 2011-01-18 16:19:48Z suehring
	63	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	64	!
[668]	65	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	66	! Exchange of parameters between ocean and atmosphere via PE0
	67	! Check for illegal combination of ws-scheme and timestep scheme.
	68	! Check for topography and ws-scheme.
	69	! Check for not cyclic boundary conditions in combination with ws-scheme and
	70	! loop_optimization = 'vector'.
	71	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	72	! Different processor/grid topology in atmosphere and ocean is now allowed!
	73	! Bugfixes in checking for conserve_volume_flow_mode
[601]	74	! 600 2010-11-24 16:10:51Z raasch
	75	! change due to new default value of surface_waterflux
[581]	76	! 580 2010-10-05 13:59:11Z heinze
[601]	77	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	78	!
[568]	79	! 567 2010-10-01 10:46:30Z helmke
	80	! calculating masks changed
	81	!
[565]	82	! 564 2010-09-30 13:18:59Z helmke
	83	! palm message identifiers of masked output changed, 20 replaced by max_masks
	84	!
[554]	85	! 553 2010-09-01 14:09:06Z weinreis
	86	! masks is calculated and removed from inipar
[532]	87	!
	88	! 531 2010-04-21 06:47:21Z heinze
	89	! Bugfix: unit of hyp changed to dbar
[392]	90	!
[525]	91	! 524 2010-03-30 02:04:51Z raasch
	92	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	93	!
[494]	94	! 493 2010-03-01 08:30:24Z raasch
	95	! netcdf_data_format is checked
	96	!
[449]	97	! 411 2009-12-11 14:15:58Z heinze
	98	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	99	! Initialization of large scale vertical motion (subsidence/ascent)
	100	!
	101	! 410 2009-12-04 17:05:40Z letzel
	102	! masked data output
	103	!
[392]	104	! 388 2009-09-23 09:40:33Z raasch
[388]	105	! Check profiles fpr prho and hyp.
[376]	106	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	107	! interval has been set, respective error message is included
[366]	108	! bc_lr_cyc and bc_ns_cyc are set,
[328]	109	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	110	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	111	! Coupling with independent precursor runs.
[264]	112	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	113	! Bugfix: pressure included for profile output
[240]	114	! Check pressure gradient conditions
[256]	115	! topography_grid_convention moved from user_check_parameters
	116	! 'single_street_canyon'
[367]	117	! Added shf* and qsws* to the list of available output data
[226]	118	!
	119	! 222 2009-01-12 16:04:16Z letzel
[217]	120	! +user_check_parameters
[213]	121	! Output of messages replaced by message handling routine.
[206]	122	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	123	! deleted __mpi2 directives
[222]	124	! Check that PALM is called with mrun -K parallel for coupling
[198]	125	!
	126	! 197 2008-09-16 15:29:03Z raasch
[177]	127	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	128	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	129	!
	130	! Strict grid matching along z is not needed for mg-solver.
[153]	131	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	132	! Case of reading data for recycling included in initializing_actions,
[197]	133	! check of turbulent_inflow and calculation of recycling_plane.
	134	! q*2 profile added
[139]	135	!
	136	! 138 2007-11-28 10:03:58Z letzel
[138]	137	! Plant canopy added
[132]	138	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	139	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	140	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	141	!
	142	! 109 2007-08-28 15:26:47Z letzel
[102]	143	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	144	! conditions for temperature and fluxes) in case of coupled runs.
	145	! +profiles for wp and w"e
[104]	146	! Bugfix: Error message concerning output of particle concentration (pc)
	147	! modified
[108]	148	! More checks and more default values for coupled runs
	149	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	150	! cloud_physics = .T.)
	151	! Rayleigh damping for ocean fixed.
[109]	152	! Check and, if necessary, set default value for dt_coupling
[98]	153	!
	154	! 97 2007-06-21 08:23:15Z raasch
[97]	155	! Initial salinity profile is calculated, salinity boundary conditions are
	156	! checked,
[94]	157	! z_max_do1d is checked only in case of ocean = .f.,
[97]	158	! +initial temperature and geostrophic velocity profiles for the ocean version,
	159	! use_pt_reference renamed use_reference
[77]	160	!
[90]	161	! 89 2007-05-25 12:08:31Z raasch
	162	! Check for user-defined profiles
	163	!
[77]	164	! 75 2007-03-22 09:54:05Z raasch
[51]	165	! "by_user" allowed as initializing action, -data_output_ts,
[63]	166	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	167	! and pt_reference are checked, moisture renamed humidity,
[72]	168	! output of precipitation amount/rate and roughnes length + check
[73]	169	! possible negative humidities are avoided in initial profile,
[75]	170	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	171	! revision added to run_description_header
[1]	172	!
[39]	173	! 20 2007-02-26 00:12:32Z raasch
	174	! Temperature and humidity gradients at top are now calculated for nzt+1,
	175	! top_heatflux and respective boundary condition bc_pt_t is checked
	176	!
[3]	177	! RCS Log replace by Id keyword, revision history cleaned up
	178	!
[1]	179	! Revision 1.61 2006/08/04 14:20:25 raasch
	180	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	181	! use_upstream_for_tke, default value for dt_dopts,
	182	! generation of file header moved from routines palm and header to here
	183	!
	184	! Revision 1.1 1997/08/26 06:29:23 raasch
	185	! Initial revision
	186	!
	187	!
	188	! Description:
	189	! ------------
	190	! Check control parameters and deduce further quantities.
	191	!------------------------------------------------------------------------------!
	192
	193	USE arrays_3d
[824]	194	USE cloud_parameters
[1]	195	USE constants
	196	USE control_parameters
[264]	197	USE dvrp_variables
[1]	198	USE grid_variables
	199	USE indices
	200	USE model_1d
	201	USE netcdf_control
	202	USE particle_attributes
	203	USE pegrid
	204	USE profil_parameter
[411]	205	USE subsidence_mod
[1]	206	USE statistics
	207	USE transpose_indices
	208
	209	IMPLICIT NONE
	210
	211	CHARACTER (LEN=1) :: sq
	212	CHARACTER (LEN=6) :: var
	213	CHARACTER (LEN=7) :: unit
	214	CHARACTER (LEN=8) :: date
	215	CHARACTER (LEN=10) :: time
[102]	216	CHARACTER (LEN=40) :: coupling_string
[1]	217	CHARACTER (LEN=100) :: action
	218
[767]	219	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
	220	position, prec
[1]	221	LOGICAL :: found, ldum
[291]	222	REAL :: gradient, maxn, maxp, remote = 0.0, &
	223	simulation_time_since_reference
[1]	224
	225	!
	226	!-- Warning, if host is not set
	227	IF ( host(1:1) == ' ' ) THEN
[213]	228	message_string = '"host" is not set. Please check that environment ' // &
	229	'variable "localhost" & is set before running PALM'
[226]	230	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	231	ENDIF
	232
	233	!
[102]	234	!-- Check the coupling mode
	235	IF ( coupling_mode /= 'uncoupled' .AND. &
	236	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	237	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	238	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	239	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	240	ENDIF
	241
	242	!
[108]	243	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	244	IF ( coupling_mode /= 'uncoupled') THEN
[213]	245
[108]	246	IF ( dt_coupling == 9999999.9 ) THEN
[213]	247	message_string = 'dt_coupling is not set but required for coup' // &
	248	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	249	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	250	ENDIF
[213]	251
[206]	252	#if defined( __parallel )
[807]	253
	254	!
	255	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	256	!-- program.
	257	!-- check_namelist_files will need the following information of the other
	258	!-- model (atmosphere/ocean).
[845]	259	! dt_coupling = remote
	260	! dt_max = remote
	261	! restart_time = remote
	262	! dt_restart= remote
	263	! simulation_time_since_reference = remote
	264	! dx = remote
[807]	265
	266
[809]	267	#if ! defined( __check )
[667]	268	IF ( myid == 0 ) THEN
	269	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	270	ierr )
	271	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	272	status, ierr )
	273	ENDIF
	274	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	275	#endif
[108]	276	IF ( dt_coupling /= remote ) THEN
[213]	277	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	278	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	279	'dt_coupling_remote = ', remote
[226]	280	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	281	ENDIF
[109]	282	IF ( dt_coupling <= 0.0 ) THEN
[809]	283	#if ! defined( __check )
[667]	284	IF ( myid == 0 ) THEN
	285	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	286	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	287	status, ierr )
	288	ENDIF
	289	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	290	#endif
[109]	291	dt_coupling = MAX( dt_max, remote )
[213]	292	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	293	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	294	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	295	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	296	ENDIF
[809]	297	#if ! defined( __check )
[667]	298	IF ( myid == 0 ) THEN
	299	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	300	ierr )
	301	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	302	status, ierr )
	303	ENDIF
	304	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	305	#endif
[108]	306	IF ( restart_time /= remote ) THEN
[213]	307	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	308	'": restart_time = ', restart_time, '& is not equal to ', &
	309	'restart_time_remote = ', remote
[226]	310	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	311	ENDIF
[809]	312	#if ! defined( __check )
[667]	313	IF ( myid == 0 ) THEN
	314	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	315	ierr )
	316	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	317	status, ierr )
	318	ENDIF
	319	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	320	#endif
[108]	321	IF ( dt_restart /= remote ) THEN
[213]	322	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	323	'": dt_restart = ', dt_restart, '& is not equal to ', &
	324	'dt_restart_remote = ', remote
[226]	325	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	326	ENDIF
[213]	327
[291]	328	simulation_time_since_reference = end_time - coupling_start_time
[809]	329	#if ! defined( __check )
[667]	330	IF ( myid == 0 ) THEN
	331	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	332	14, comm_inter, ierr )
	333	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	334	status, ierr )
	335	ENDIF
	336	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	337	#endif
[291]	338	IF ( simulation_time_since_reference /= remote ) THEN
[213]	339	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	340	'": simulation_time_since_reference = ', &
	341	simulation_time_since_reference, '& is not equal to ', &
	342	'simulation_time_since_reference_remote = ', remote
[226]	343	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	344	ENDIF
[213]	345
[809]	346	#if ! defined( __check )
[667]	347	IF ( myid == 0 ) THEN
	348	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	349	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	350	status, ierr )
[108]	351	ENDIF
[667]	352	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	353
[807]	354	#endif
[667]	355	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	356
	357	IF ( dx < remote ) THEN
	358	WRITE( message_string, * ) 'coupling mode "', &
	359	TRIM( coupling_mode ), &
	360	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	361	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	362	ENDIF
	363
	364	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	365	WRITE( message_string, * ) 'coupling mode "', &
	366	TRIM( coupling_mode ), &
	367	'": Domain size in x-direction is not equal in ocean and atmosphere'
	368	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	369	ENDIF
	370
[108]	371	ENDIF
[213]	372
[809]	373	#if ! defined( __check )
[667]	374	IF ( myid == 0) THEN
	375	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	376	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	377	status, ierr )
[108]	378	ENDIF
[667]	379	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	380	#endif
[667]	381	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	382
	383	IF ( dy < remote ) THEN
	384	WRITE( message_string, * ) 'coupling mode "', &
	385	TRIM( coupling_mode ), &
	386	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	387	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	388	ENDIF
	389
	390	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	391	WRITE( message_string, * ) 'coupling mode "', &
	392	TRIM( coupling_mode ), &
	393	'": Domain size in y-direction is not equal in ocean and atmosphere'
	394	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	395	ENDIF
	396
	397	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	398	WRITE( message_string, * ) 'coupling mode "', &
	399	TRIM( coupling_mode ), &
	400	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	401	' atmosphere'
	402	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	403	ENDIF
	404
	405	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	406	WRITE( message_string, * ) 'coupling mode "', &
	407	TRIM( coupling_mode ), &
	408	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	409	' atmosphere'
	410	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	411	ENDIF
	412
[108]	413	ENDIF
[222]	414	#else
	415	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	416	' ''mrun -K parallel'''
[226]	417	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	418	#endif
	419	ENDIF
	420
[809]	421	#if defined( __parallel ) && ! defined ( __check )
[108]	422	!
	423	!-- Exchange via intercommunicator
[667]	424	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	425	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	426	ierr )
[667]	427	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	428	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	429	comm_inter, status, ierr )
[108]	430	ENDIF
[667]	431	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	432
[108]	433	#endif
	434
	435
	436	!
[1]	437	!-- Generate the file header which is used as a header for most of PALM's
	438	!-- output files
	439	CALL DATE_AND_TIME( date, time )
	440	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	441	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	442	IF ( coupling_mode == 'uncoupled' ) THEN
	443	coupling_string = ''
	444	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	445	coupling_string = ' coupled (atmosphere)'
	446	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	447	coupling_string = ' coupled (ocean)'
	448	ENDIF
[1]	449
[102]	450	WRITE ( run_description_header, &
	451	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	452	TRIM( version ), TRIM( revision ), 'run: ', &
	453	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	454	'host: ', TRIM( host ), run_date, run_time
[1]	455
	456	!
[63]	457	!-- Check the general loop optimization method
	458	IF ( loop_optimization == 'default' ) THEN
	459	IF ( host(1:3) == 'nec' ) THEN
	460	loop_optimization = 'vector'
	461	ELSE
	462	loop_optimization = 'cache'
	463	ENDIF
	464	ENDIF
	465	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	466	.AND. loop_optimization /= 'vector' ) THEN
[213]	467	message_string = 'illegal value given for loop_optimization: "' // &
	468	TRIM( loop_optimization ) // '"'
[226]	469	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	470	ENDIF
	471
	472	!
[1]	473	!-- Check topography setting (check for illegal parameter combinations)
	474	IF ( topography /= 'flat' ) THEN
	475	action = ' '
[861]	476	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
[1]	477	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	478	ENDIF
[861]	479	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	480	THEN
[1]	481	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	482	ENDIF
[51]	483	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	484	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	485	ENDIF
[114]	486	IF ( psolver == 'sor' ) THEN
[1]	487	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	488	ENDIF
	489	IF ( sloping_surface ) THEN
	490	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	491	ENDIF
	492	IF ( galilei_transformation ) THEN
	493	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	494	ENDIF
	495	IF ( cloud_physics ) THEN
	496	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	497	ENDIF
	498	IF ( cloud_droplets ) THEN
	499	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	500	ENDIF
	501	IF ( .NOT. prandtl_layer ) THEN
	502	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	503	ENDIF
	504	IF ( action /= ' ' ) THEN
[213]	505	message_string = 'a non-flat topography does not allow ' // &
	506	TRIM( action )
[226]	507	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	508	ENDIF
[256]	509	!
	510	!-- In case of non-flat topography, check whether the convention how to
	511	!-- define the topography grid has been set correctly, or whether the default
	512	!-- is applicable. If this is not possible, abort.
	513	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	514	IF ( TRIM( topography ) /= 'single_building' .AND. &
	515	TRIM( topography ) /= 'single_street_canyon' .AND. &
	516	TRIM( topography ) /= 'read_from_file' ) THEN
	517	!-- The default value is not applicable here, because it is only valid
	518	!-- for the two standard cases 'single_building' and 'read_from_file'
	519	!-- defined in init_grid.
	520	WRITE( message_string, * ) &
	521	'The value for "topography_grid_convention" ', &
	522	'is not set. Its default value is & only valid for ', &
	523	'"topography" = ''single_building'', ', &
	524	'''single_street_canyon'' & or ''read_from_file''.', &
	525	' & Choose ''cell_edge'' or ''cell_center''.'
	526	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	527	ELSE
	528	!-- The default value is applicable here.
	529	!-- Set convention according to topography.
	530	IF ( TRIM( topography ) == 'single_building' .OR. &
	531	TRIM( topography ) == 'single_street_canyon' ) THEN
	532	topography_grid_convention = 'cell_edge'
	533	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	534	topography_grid_convention = 'cell_center'
	535	ENDIF
	536	ENDIF
	537	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	538	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	539	WRITE( message_string, * ) &
	540	'The value for "topography_grid_convention" is ', &
	541	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	542	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	543	ENDIF
	544
[1]	545	ENDIF
[94]	546
[1]	547	!
[94]	548	!-- Check ocean setting
	549	IF ( ocean ) THEN
[332]	550
[94]	551	action = ' '
	552	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	553	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	554	ENDIF
[97]	555	IF ( momentum_advec == 'ups-scheme' ) THEN
	556	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	557	ENDIF
[94]	558	IF ( action /= ' ' ) THEN
[213]	559	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	560	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	561	ENDIF
	562
[332]	563	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	564	TRIM( coupling_char ) == '_O' ) THEN
[343]	565
[94]	566	!
[332]	567	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	568	!-- ocean run (this setting is done via mrun-option -y)
[343]	569
[291]	570	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	571	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	572	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	573
[291]	574	ENDIF
	575
	576	!
[1]	577	!-- Check whether there are any illegal values
	578	!-- Pressure solver:
	579	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	580	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	581	message_string = 'unknown solver for perturbation pressure: psolver' // &
	582	' = "' // TRIM( psolver ) // '"'
[226]	583	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	584	ENDIF
	585
	586	#if defined( __parallel )
	587	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	588	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	589	'for a 1d domain-decomposition along x & please do' // &
	590	' not set npey/=1 in the parameter file'
[226]	591	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	592	ENDIF
[181]	593	IF ( psolver == 'poisfft_hybrid' .AND. &
	594	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	595	psolver == 'multigrid' .AND. &
	596	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	597	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	598	'work for subdomains with unequal size & please ' // &
	599	'set grid_matching = ''strict'' in the parameter file'
[226]	600	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	601	ENDIF
	602	#else
	603	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	604	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	605	' for a parallel environment'
[226]	606	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	607	ENDIF
	608	#endif
	609
	610	IF ( psolver == 'multigrid' ) THEN
	611	IF ( cycle_mg == 'w' ) THEN
	612	gamma_mg = 2
	613	ELSEIF ( cycle_mg == 'v' ) THEN
	614	gamma_mg = 1
	615	ELSE
[213]	616	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	617	TRIM( cycle_mg ) // '"'
[226]	618	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	619	ENDIF
	620	ENDIF
	621
	622	IF ( fft_method /= 'singleton-algorithm' .AND. &
	623	fft_method /= 'temperton-algorithm' .AND. &
	624	fft_method /= 'system-specific' ) THEN
[213]	625	message_string = 'unknown fft-algorithm: fft_method = "' // &
	626	TRIM( fft_method ) // '"'
[226]	627	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	628	ENDIF
[667]	629
	630	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	631	.NOT. call_psolver_at_all_substeps ) THEN
[667]	632	message_string = 'psolver must be called at each RK3 substep when "'//&
	633	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	634	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	635	END IF
[1]	636	!
	637	!-- Advection schemes:
[673]	638	!
	639	!-- Set the LOGICALS to enhance the performance.
	640	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	641	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	642
[667]	643	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
	644	momentum_advec /= 'ups-scheme' ) THEN
[214]	645	message_string = 'unknown advection scheme: momentum_advec = "' // &
	646	TRIM( momentum_advec ) // '"'
[226]	647	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	648	ENDIF
[667]	649	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	650	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
	651	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
	652	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
	653	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
	654	message_string = 'momentum_advec or scalar_advec = "' &
	655	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	656	TRIM( timestep_scheme ) // '"'
[226]	657	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	658	ENDIF
[667]	659	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
	660	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
[214]	661	message_string = 'unknown advection scheme: scalar_advec = "' // &
	662	TRIM( scalar_advec ) // '"'
[226]	663	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	664	ENDIF
	665
	666	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	667	use_upstream_for_tke = .TRUE.
[214]	668	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	669	'use_sgs_for_particles = .TRUE.'
[226]	670	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	671	ENDIF
	672
	673	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	674	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	675	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	676	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	677	ENDIF
	678
[824]	679	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	680	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	681	'curvature_solution_effects = .TRUE.'
	682	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	683	ENDIF
	684
[1]	685	!
	686	!-- Timestep schemes:
	687	SELECT CASE ( TRIM( timestep_scheme ) )
	688
	689	CASE ( 'euler' )
	690	intermediate_timestep_count_max = 1
	691	asselin_filter_factor = 0.0
	692
	693	CASE ( 'leapfrog', 'leapfrog+euler' )
	694	intermediate_timestep_count_max = 1
	695
	696	CASE ( 'runge-kutta-2' )
	697	intermediate_timestep_count_max = 2
	698	asselin_filter_factor = 0.0
	699
	700	CASE ( 'runge-kutta-3' )
	701	intermediate_timestep_count_max = 3
	702	asselin_filter_factor = 0.0
	703
	704	CASE DEFAULT
[214]	705	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	706	TRIM( timestep_scheme ) // '"'
[226]	707	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	708
	709	END SELECT
	710
[63]	711	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	712	THEN
[214]	713	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	714	'" & does not work with timestep_scheme "' // &
	715	TRIM( timestep_scheme ) // '"'
[226]	716	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	717	ENDIF
	718
[667]	719	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	720	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	721	message_string = 'momentum advection scheme "' // &
	722	TRIM( momentum_advec ) // '" & does not work with ' // &
	723	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	724	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	725	ENDIF
	726
[825]	727	!
	728	!-- Collision kernels:
	729	SELECT CASE ( TRIM( collision_kernel ) )
	730
[828]	731	CASE ( 'hall', 'hall_fast' )
[825]	732	hall_kernel = .TRUE.
	733
	734	CASE ( 'palm' )
	735	palm_kernel = .TRUE.
	736
[828]	737	CASE ( 'wang', 'wang_fast' )
[825]	738	wang_kernel = .TRUE.
	739
	740	CASE ( 'none' )
	741
	742
	743	CASE DEFAULT
	744	message_string = 'unknown collision kernel: collision_kernel = "' // &
	745	TRIM( collision_kernel ) // '"'
	746	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	747
	748	END SELECT
[828]	749	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	750
[147]	751	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	752	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	753	!
[214]	754	!-- No restart run: several initialising actions are possible
[1]	755	action = initializing_actions
	756	DO WHILE ( TRIM( action ) /= '' )
	757	position = INDEX( action, ' ' )
	758	SELECT CASE ( action(1:position-1) )
	759
	760	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	761	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	762	action = action(position+1:)
	763
	764	CASE DEFAULT
[214]	765	message_string = 'initializing_action = "' // &
	766	TRIM( action ) // '" unkown or not allowed'
[226]	767	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	768
	769	END SELECT
	770	ENDDO
	771	ENDIF
[214]	772
[680]	773	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	774	conserve_volume_flow ) THEN
	775	message_string = 'initializing_actions = "initialize_vortex"' // &
	776	' ist not allowed with conserve_volume_flow = .T.'
	777	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	778	ENDIF
	779
	780
[1]	781	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	782	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	783	message_string = 'initializing_actions = "set_constant_profiles"' // &
	784	' and "set_1d-model_profiles" are not allowed ' // &
	785	'simultaneously'
[226]	786	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	787	ENDIF
[214]	788
[46]	789	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	790	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	791	message_string = 'initializing_actions = "set_constant_profiles"' // &
	792	' and "by_user" are not allowed simultaneously'
[226]	793	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	794	ENDIF
[214]	795
[46]	796	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	797	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	798	message_string = 'initializing_actions = "by_user" and ' // &
	799	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	800	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	801	ENDIF
[1]	802
[75]	803	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	804	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	805	'not allowed with humidity = ', humidity
[226]	806	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	807	ENDIF
	808
[72]	809	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	810	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	811	'not allowed with cloud_physics = ', cloud_physics
[226]	812	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	813	ENDIF
	814
[75]	815	IF ( humidity .AND. sloping_surface ) THEN
[214]	816	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	817	'are not allowed simultaneously'
[226]	818	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	819	ENDIF
	820
[75]	821	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	822	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	823	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	824	ENDIF
	825
[75]	826	IF ( passive_scalar .AND. humidity ) THEN
[214]	827	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	828	'is not allowed simultaneously'
[226]	829	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	830	ENDIF
	831
	832	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	833	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	834	' = .TRUE.'
[226]	835	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	836	ENDIF
	837
	838	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	839	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	840	'" found for parameter grid_matching'
[226]	841	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	842	ENDIF
	843
[138]	844	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	845	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	846	'coefficient & given value is drag_coefficient = 0.0'
[226]	847	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	848	ENDIF
	849
[1]	850	!
	851	!-- In case of no model continuation run, check initialising parameters and
	852	!-- deduce further quantities
	853	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	854
	855	!
[767]	856	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	857	pt_init = pt_surface
[94]	858	IF ( humidity ) q_init = q_surface
	859	IF ( ocean ) sa_init = sa_surface
	860	IF ( passive_scalar ) q_init = s_surface
[138]	861	IF ( plant_canopy ) lad = 0.0
[1]	862
	863	!
	864	!--
	865	!-- If required, compute initial profile of the geostrophic wind
	866	!-- (component ug)
	867	i = 1
	868	gradient = 0.0
[97]	869
	870	IF ( .NOT. ocean ) THEN
	871
	872	ug_vertical_gradient_level_ind(1) = 0
	873	ug(0) = ug_surface
	874	DO k = 1, nzt+1
[177]	875	IF ( i < 11 ) THEN
	876	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	877	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	878	gradient = ug_vertical_gradient(i) / 100.0
	879	ug_vertical_gradient_level_ind(i) = k - 1
	880	i = i + 1
[1]	881	ENDIF
[177]	882	ENDIF
[97]	883	IF ( gradient /= 0.0 ) THEN
	884	IF ( k /= 1 ) THEN
	885	ug(k) = ug(k-1) + dzu(k) * gradient
	886	ELSE
	887	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	888	ENDIF
[1]	889	ELSE
[97]	890	ug(k) = ug(k-1)
[1]	891	ENDIF
[97]	892	ENDDO
[1]	893
[97]	894	ELSE
	895
	896	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	897	ug(nzt+1) = ug_surface
[667]	898	DO k = nzt, nzb, -1
[177]	899	IF ( i < 11 ) THEN
	900	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	901	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	902	gradient = ug_vertical_gradient(i) / 100.0
	903	ug_vertical_gradient_level_ind(i) = k + 1
	904	i = i + 1
[97]	905	ENDIF
	906	ENDIF
	907	IF ( gradient /= 0.0 ) THEN
	908	IF ( k /= nzt ) THEN
	909	ug(k) = ug(k+1) - dzu(k+1) * gradient
	910	ELSE
	911	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	912	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	913	ENDIF
	914	ELSE
	915	ug(k) = ug(k+1)
	916	ENDIF
	917	ENDDO
	918
	919	ENDIF
	920
[1]	921	!
[767]	922	!-- In case of no given gradients for ug, choose a zero gradient
[97]	923	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	924	ug_vertical_gradient_level(1) = 0.0
	925	ENDIF
	926
	927	!
	928	!--
	929	!-- If required, compute initial profile of the geostrophic wind
	930	!-- (component vg)
	931	i = 1
	932	gradient = 0.0
[97]	933
	934	IF ( .NOT. ocean ) THEN
	935
	936	vg_vertical_gradient_level_ind(1) = 0
	937	vg(0) = vg_surface
	938	DO k = 1, nzt+1
[177]	939	IF ( i < 11 ) THEN
	940	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	941	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	942	gradient = vg_vertical_gradient(i) / 100.0
	943	vg_vertical_gradient_level_ind(i) = k - 1
	944	i = i + 1
[1]	945	ENDIF
	946	ENDIF
[97]	947	IF ( gradient /= 0.0 ) THEN
	948	IF ( k /= 1 ) THEN
	949	vg(k) = vg(k-1) + dzu(k) * gradient
	950	ELSE
	951	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	952	ENDIF
[1]	953	ELSE
[97]	954	vg(k) = vg(k-1)
[1]	955	ENDIF
[97]	956	ENDDO
[1]	957
[97]	958	ELSE
	959
[121]	960	vg_vertical_gradient_level_ind(1) = nzt+1
	961	vg(nzt+1) = vg_surface
[667]	962	DO k = nzt, nzb, -1
[177]	963	IF ( i < 11 ) THEN
	964	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	965	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	966	gradient = vg_vertical_gradient(i) / 100.0
	967	vg_vertical_gradient_level_ind(i) = k + 1
	968	i = i + 1
[97]	969	ENDIF
	970	ENDIF
	971	IF ( gradient /= 0.0 ) THEN
	972	IF ( k /= nzt ) THEN
	973	vg(k) = vg(k+1) - dzu(k+1) * gradient
	974	ELSE
	975	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	976	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	977	ENDIF
	978	ELSE
	979	vg(k) = vg(k+1)
	980	ENDIF
	981	ENDDO
	982
	983	ENDIF
	984
[1]	985	!
[767]	986	!-- In case of no given gradients for vg, choose a zero gradient
[97]	987	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	988	vg_vertical_gradient_level(1) = 0.0
	989	ENDIF
	990
	991	!
[767]	992	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	993	!-- interpolate them from wind profile data (if given)
	994	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	995
	996	u_init = ug
	997	v_init = vg
	998
	999	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	1000
	1001	IF ( uv_heights(1) /= 0.0 ) THEN
	1002	message_string = 'uv_heights(1) must be 0.0'
	1003	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	1004	ENDIF
	1005
	1006	use_prescribed_profile_data = .TRUE.
	1007
	1008	kk = 1
	1009	u_init(0) = 0.0
	1010	v_init(0) = 0.0
	1011
	1012	DO k = 1, nz+1
	1013
	1014	IF ( kk < 100 ) THEN
	1015	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	1016	kk = kk + 1
	1017	IF ( kk == 100 ) EXIT
	1018	ENDDO
	1019	ENDIF
	1020
[774]	1021	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1022	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1023	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1024	( u_profile(kk+1) - u_profile(kk) )
	1025	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1026	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1027	( v_profile(kk+1) - v_profile(kk) )
	1028	ELSE
	1029	u_init(k) = u_profile(kk)
	1030	v_init(k) = v_profile(kk)
	1031	ENDIF
	1032
	1033	ENDDO
	1034
	1035	ELSE
	1036
	1037	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1038	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1039
	1040	ENDIF
	1041
	1042	!
[94]	1043	!-- Compute initial temperature profile using the given temperature gradients
[940]	1044	IF ( .NOT. neutral ) THEN
[94]	1045
[940]	1046	i = 1
	1047	gradient = 0.0
[94]	1048
[940]	1049	IF ( .NOT. ocean ) THEN
	1050
	1051	pt_vertical_gradient_level_ind(1) = 0
	1052	DO k = 1, nzt+1
	1053	IF ( i < 11 ) THEN
	1054	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1055	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1056	gradient = pt_vertical_gradient(i) / 100.0
	1057	pt_vertical_gradient_level_ind(i) = k - 1
	1058	i = i + 1
	1059	ENDIF
[1]	1060	ENDIF
[940]	1061	IF ( gradient /= 0.0 ) THEN
	1062	IF ( k /= 1 ) THEN
	1063	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1064	ELSE
	1065	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	1066	ENDIF
[94]	1067	ELSE
[940]	1068	pt_init(k) = pt_init(k-1)
[94]	1069	ENDIF
[940]	1070	ENDDO
[1]	1071
[940]	1072	ELSE
[94]	1073
[940]	1074	pt_vertical_gradient_level_ind(1) = nzt+1
	1075	DO k = nzt, 0, -1
	1076	IF ( i < 11 ) THEN
	1077	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1078	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1079	gradient = pt_vertical_gradient(i) / 100.0
	1080	pt_vertical_gradient_level_ind(i) = k + 1
	1081	i = i + 1
	1082	ENDIF
[94]	1083	ENDIF
[940]	1084	IF ( gradient /= 0.0 ) THEN
	1085	IF ( k /= nzt ) THEN
	1086	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1087	ELSE
	1088	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1089	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1090	ENDIF
[94]	1091	ELSE
[940]	1092	pt_init(k) = pt_init(k+1)
[94]	1093	ENDIF
[940]	1094	ENDDO
[94]	1095
[940]	1096	ENDIF
	1097
[94]	1098	ENDIF
	1099
[1]	1100	!
	1101	!-- In case of no given temperature gradients, choose gradient of neutral
	1102	!-- stratification
[94]	1103	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1104	pt_vertical_gradient_level(1) = 0.0
	1105	ENDIF
	1106
	1107	!
[94]	1108	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1109	!-- boundary condition
[19]	1110	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1111
	1112	!
	1113	!-- If required, compute initial humidity or scalar profile using the given
	1114	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1115	!-- values of the scalar parameters on humidity parameters
	1116	IF ( passive_scalar ) THEN
	1117	bc_q_b = bc_s_b
	1118	bc_q_t = bc_s_t
	1119	q_surface = s_surface
	1120	q_surface_initial_change = s_surface_initial_change
	1121	q_vertical_gradient = s_vertical_gradient
	1122	q_vertical_gradient_level = s_vertical_gradient_level
	1123	surface_waterflux = surface_scalarflux
[407]	1124	wall_humidityflux = wall_scalarflux
[1]	1125	ENDIF
	1126
[75]	1127	IF ( humidity .OR. passive_scalar ) THEN
[1]	1128
	1129	i = 1
	1130	gradient = 0.0
	1131	q_vertical_gradient_level_ind(1) = 0
	1132	DO k = 1, nzt+1
[177]	1133	IF ( i < 11 ) THEN
	1134	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1135	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1136	gradient = q_vertical_gradient(i) / 100.0
	1137	q_vertical_gradient_level_ind(i) = k - 1
	1138	i = i + 1
[1]	1139	ENDIF
	1140	ENDIF
	1141	IF ( gradient /= 0.0 ) THEN
	1142	IF ( k /= 1 ) THEN
	1143	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1144	ELSE
	1145	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1146	ENDIF
	1147	ELSE
	1148	q_init(k) = q_init(k-1)
	1149	ENDIF
[72]	1150	!
	1151	!-- Avoid negative humidities
	1152	IF ( q_init(k) < 0.0 ) THEN
	1153	q_init(k) = 0.0
	1154	ENDIF
[1]	1155	ENDDO
	1156
	1157	!
	1158	!-- In case of no given humidity gradients, choose zero gradient
	1159	!-- conditions
	1160	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1161	q_vertical_gradient_level(1) = 0.0
	1162	ENDIF
	1163
	1164	!
	1165	!-- Store humidity gradient at the top boundary for possile Neumann
	1166	!-- boundary condition
[19]	1167	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1168
	1169	ENDIF
	1170
[94]	1171	!
	1172	!-- If required, compute initial salinity profile using the given salinity
	1173	!-- gradients
	1174	IF ( ocean ) THEN
	1175
	1176	i = 1
	1177	gradient = 0.0
	1178
	1179	sa_vertical_gradient_level_ind(1) = nzt+1
	1180	DO k = nzt, 0, -1
[177]	1181	IF ( i < 11 ) THEN
	1182	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1183	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1184	gradient = sa_vertical_gradient(i) / 100.0
	1185	sa_vertical_gradient_level_ind(i) = k + 1
	1186	i = i + 1
[94]	1187	ENDIF
	1188	ENDIF
	1189	IF ( gradient /= 0.0 ) THEN
	1190	IF ( k /= nzt ) THEN
	1191	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1192	ELSE
	1193	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1194	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1195	ENDIF
	1196	ELSE
	1197	sa_init(k) = sa_init(k+1)
	1198	ENDIF
	1199	ENDDO
	1200
	1201	ENDIF
	1202
[138]	1203	!
[388]	1204	!-- If required compute the profile of leaf area density used in the plant
	1205	!-- canopy model
[138]	1206	IF ( plant_canopy ) THEN
	1207
	1208	i = 1
	1209	gradient = 0.0
[1]	1210
[138]	1211	IF ( .NOT. ocean ) THEN
[153]	1212
	1213	lad(0) = lad_surface
[138]	1214
	1215	lad_vertical_gradient_level_ind(1) = 0
	1216	DO k = 1, pch_index
[177]	1217	IF ( i < 11 ) THEN
	1218	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1219	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1220	gradient = lad_vertical_gradient(i)
	1221	lad_vertical_gradient_level_ind(i) = k - 1
	1222	i = i + 1
[138]	1223	ENDIF
	1224	ENDIF
	1225	IF ( gradient /= 0.0 ) THEN
	1226	IF ( k /= 1 ) THEN
	1227	lad(k) = lad(k-1) + dzu(k) * gradient
	1228	ELSE
	1229	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1230	ENDIF
	1231	ELSE
	1232	lad(k) = lad(k-1)
	1233	ENDIF
	1234	ENDDO
	1235
	1236	ENDIF
	1237
[1]	1238	!
[388]	1239	!-- In case of no given leaf area density gradients, choose a vanishing
	1240	!-- gradient
[138]	1241	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1242	lad_vertical_gradient_level(1) = 0.0
	1243	ENDIF
	1244
	1245	ENDIF
	1246
	1247	ENDIF
[411]	1248
	1249	!
	1250	!-- Initialize large scale subsidence if required
[580]	1251	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1252	large_scale_subsidence = .TRUE.
	1253	CALL init_w_subsidence
	1254	END IF
	1255
[138]	1256
[667]	1257
[138]	1258	!
[1]	1259	!-- Compute Coriolis parameter
	1260	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1261	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1262
	1263	!
[97]	1264	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1265	!-- set the reference temperature equal to the surface temperature.
	1266	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1267
	1268	!
[97]	1269	!-- Reference value has to be used in buoyancy terms
	1270	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1271
	1272	!
	1273	!-- Sign of buoyancy/stability terms
	1274	IF ( ocean ) atmos_ocean_sign = -1.0
	1275
	1276	!
[108]	1277	!-- Ocean version must use flux boundary conditions at the top
	1278	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1279	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1280	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1281	ENDIF
[97]	1282
	1283	!
[1]	1284	!-- In case of a given slope, compute the relevant quantities
	1285	IF ( alpha_surface /= 0.0 ) THEN
	1286	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1287	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1288	' ) must be < 90.0'
[226]	1289	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1290	ENDIF
	1291	sloping_surface = .TRUE.
	1292	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1293	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1294	ENDIF
	1295
	1296	!
	1297	!-- Check time step and cfl_factor
	1298	IF ( dt /= -1.0 ) THEN
	1299	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1300	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1301	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1302	ENDIF
	1303	dt_3d = dt
	1304	dt_fixed = .TRUE.
	1305	ENDIF
	1306
	1307	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1308	IF ( cfl_factor == -1.0 ) THEN
	1309	IF ( momentum_advec == 'ups-scheme' .OR. &
	1310	scalar_advec == 'ups-scheme' ) THEN
	1311	cfl_factor = 0.8
	1312	ELSE
	1313	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1314	cfl_factor = 0.8
	1315	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1316	cfl_factor = 0.9
	1317	ELSE
	1318	cfl_factor = 0.1
	1319	ENDIF
	1320	ENDIF
	1321	ELSE
[215]	1322	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1323	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1324	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1325	ENDIF
	1326	ENDIF
	1327
	1328	!
	1329	!-- Store simulated time at begin
	1330	simulated_time_at_begin = simulated_time
	1331
	1332	!
[291]	1333	!-- Store reference time for coupled runs and change the coupling flag,
	1334	!-- if ...
	1335	IF ( simulated_time == 0.0 ) THEN
	1336	IF ( coupling_start_time == 0.0 ) THEN
	1337	time_since_reference_point = 0.0
	1338	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1339	run_coupled = .FALSE.
	1340	ENDIF
	1341	ENDIF
	1342
	1343	!
[1]	1344	!-- Set wind speed in the Galilei-transformed system
	1345	IF ( galilei_transformation ) THEN
	1346	IF ( use_ug_for_galilei_tr .AND. &
	1347	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1348	vg_vertical_gradient_level(1) == 0.0 ) THEN
[866]	1349	u_gtrans = ug_surface * 0.6
	1350	v_gtrans = vg_surface * 0.6
[1]	1351	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1352	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1353	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1354	' with galilei transformation'
[226]	1355	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1356	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1357	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1358	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1359	' with galilei transformation'
[226]	1360	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1361	ELSE
[215]	1362	message_string = 'variable translation speed used for galilei-' // &
	1363	'transformation, which may cause & instabilities in stably ' // &
	1364	'stratified regions'
[226]	1365	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1366	ENDIF
	1367	ENDIF
	1368
	1369	!
	1370	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1371	!-- fluxes have to be used in the diffusion-terms
	1372	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1373
	1374	!
	1375	!-- Check boundary conditions and set internal variables:
	1376	!-- Lateral boundary conditions
[73]	1377	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1378	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1379	message_string = 'unknown boundary condition: bc_lr = "' // &
	1380	TRIM( bc_lr ) // '"'
[226]	1381	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1382	ENDIF
[73]	1383	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1384	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1385	message_string = 'unknown boundary condition: bc_ns = "' // &
	1386	TRIM( bc_ns ) // '"'
[226]	1387	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1388	ENDIF
	1389
	1390	!
[366]	1391	!-- Internal variables used for speed optimization in if clauses
[707]	1392	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1393	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1394	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1395	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1396	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1397	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1398
	1399	!
[1]	1400	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1401	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1402	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1403	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1404	IF ( psolver /= 'multigrid' ) THEN
[215]	1405	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1406	'psolver = "' // TRIM( psolver ) // '"'
[226]	1407	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1408	ENDIF
[667]	1409	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1410	momentum_advec /= 'ws-scheme') THEN
[215]	1411	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1412	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1413	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1414	ENDIF
[667]	1415	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1416	scalar_advec /= 'ws-scheme' ) THEN
[215]	1417	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1418	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1419	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1420	ENDIF
	1421	IF ( galilei_transformation ) THEN
[215]	1422	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1423	'galilei_transformation = .T.'
[226]	1424	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1425	ENDIF
	1426	ENDIF
	1427
	1428	!
	1429	!-- Bottom boundary condition for the turbulent Kinetic energy
	1430	IF ( bc_e_b == 'neumann' ) THEN
	1431	ibc_e_b = 1
	1432	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1433	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1434	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1435	ENDIF
	1436	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1437	ibc_e_b = 2
	1438	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1439	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1440	TRIM( bc_e_b ) // '"'
[226]	1441	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1442	ENDIF
	1443	IF ( .NOT. prandtl_layer ) THEN
	1444	bc_e_b = 'neumann'
	1445	ibc_e_b = 1
[215]	1446	message_string = 'boundary condition bc_e_b changed to "' // &
	1447	TRIM( bc_e_b ) // '"'
[226]	1448	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1449	ENDIF
	1450	ELSE
[215]	1451	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1452	TRIM( bc_e_b ) // '"'
[226]	1453	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1454	ENDIF
	1455
	1456	!
	1457	!-- Boundary conditions for perturbation pressure
	1458	IF ( bc_p_b == 'dirichlet' ) THEN
	1459	ibc_p_b = 0
	1460	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1461	ibc_p_b = 1
	1462	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1463	ibc_p_b = 2
	1464	ELSE
[215]	1465	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1466	TRIM( bc_p_b ) // '"'
[226]	1467	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1468	ENDIF
	1469	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1470	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1471	'" not allowed with prandtl_layer = .FALSE.'
[226]	1472	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1473	ENDIF
	1474	IF ( bc_p_t == 'dirichlet' ) THEN
	1475	ibc_p_t = 0
	1476	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1477	ibc_p_t = 1
	1478	ELSE
[215]	1479	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1480	TRIM( bc_p_t ) // '"'
[226]	1481	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1482	ENDIF
	1483
	1484	!
	1485	!-- Boundary conditions for potential temperature
[102]	1486	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1487	ibc_pt_b = 2
[1]	1488	ELSE
[102]	1489	IF ( bc_pt_b == 'dirichlet' ) THEN
	1490	ibc_pt_b = 0
	1491	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1492	ibc_pt_b = 1
	1493	ELSE
[215]	1494	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1495	TRIM( bc_pt_b ) // '"'
[226]	1496	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1497	ENDIF
	1498	ENDIF
[102]	1499
[1]	1500	IF ( bc_pt_t == 'dirichlet' ) THEN
	1501	ibc_pt_t = 0
	1502	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1503	ibc_pt_t = 1
[19]	1504	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1505	ibc_pt_t = 2
[1]	1506	ELSE
[215]	1507	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1508	TRIM( bc_pt_t ) // '"'
[226]	1509	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1510	ENDIF
	1511
[20]	1512	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1513	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[940]	1514
	1515	IF ( neutral ) THEN
	1516
	1517	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
	1518	THEN
	1519	message_string = 'heatflux must not be set for pure neutral flow'
	1520	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1521	ENDIF
	1522
	1523	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
	1524	THEN
	1525	message_string = 'heatflux must not be set for pure neutral flow'
	1526	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1527	ENDIF
	1528
	1529	ENDIF
	1530
[103]	1531	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1532	top_momentumflux_v /= 9999999.9 ) THEN
	1533	constant_top_momentumflux = .TRUE.
	1534	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1535	top_momentumflux_v == 9999999.9 ) ) THEN
	1536	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1537	'must be set'
[226]	1538	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1539	ENDIF
[1]	1540
	1541	!
	1542	!-- A given surface temperature implies Dirichlet boundary condition for
	1543	!-- temperature. In this case specification of a constant heat flux is
	1544	!-- forbidden.
	1545	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1546	surface_heatflux /= 0.0 ) THEN
[215]	1547	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1548	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1549	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1550	ENDIF
	1551	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1552	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1553	'wed with pt_surface_initial_change (/=0) = ', &
	1554	pt_surface_initial_change
[226]	1555	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1556	ENDIF
	1557
	1558	!
[19]	1559	!-- A given temperature at the top implies Dirichlet boundary condition for
	1560	!-- temperature. In this case specification of a constant heat flux is
	1561	!-- forbidden.
	1562	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1563	top_heatflux /= 0.0 ) THEN
[215]	1564	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1565	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1566	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1567	ENDIF
	1568
	1569	!
[95]	1570	!-- Boundary conditions for salinity
	1571	IF ( ocean ) THEN
	1572	IF ( bc_sa_t == 'dirichlet' ) THEN
	1573	ibc_sa_t = 0
	1574	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1575	ibc_sa_t = 1
	1576	ELSE
[215]	1577	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1578	TRIM( bc_sa_t ) // '"'
[226]	1579	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1580	ENDIF
	1581
	1582	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1583	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1584	message_string = 'boundary condition: bc_sa_t = "' // &
	1585	TRIM( bc_sa_t ) // '" requires to set ' // &
	1586	'top_salinityflux'
[226]	1587	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1588	ENDIF
[95]	1589
	1590	!
	1591	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1592	!-- salinity. In this case specification of a constant salinity flux is
	1593	!-- forbidden.
	1594	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1595	top_salinityflux /= 0.0 ) THEN
[215]	1596	message_string = 'boundary condition: bc_sa_t = "' // &
	1597	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1598	'constant_top_salinityflux = .TRUE.'
[226]	1599	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1600	ENDIF
	1601
	1602	ENDIF
	1603
	1604	!
[75]	1605	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1606	!-- water content / scalar
[75]	1607	IF ( humidity .OR. passive_scalar ) THEN
	1608	IF ( humidity ) THEN
[1]	1609	sq = 'q'
	1610	ELSE
	1611	sq = 's'
	1612	ENDIF
	1613	IF ( bc_q_b == 'dirichlet' ) THEN
	1614	ibc_q_b = 0
	1615	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1616	ibc_q_b = 1
	1617	ELSE
[215]	1618	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1619	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1620	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1621	ENDIF
	1622	IF ( bc_q_t == 'dirichlet' ) THEN
	1623	ibc_q_t = 0
	1624	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1625	ibc_q_t = 1
	1626	ELSE
[215]	1627	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1628	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1629	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1630	ENDIF
	1631
[600]	1632	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1633
	1634	!
	1635	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1636	!-- humidity. In this case specification of a constant water flux is
[1]	1637	!-- forbidden.
	1638	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1639	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1640	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1641	'th prescribed surface flux'
[226]	1642	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1643	ENDIF
	1644	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1645	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1646	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1647	q_surface_initial_change
[226]	1648	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1649	ENDIF
	1650
	1651	ENDIF
	1652
	1653	!
	1654	!-- Boundary conditions for horizontal components of wind speed
	1655	IF ( bc_uv_b == 'dirichlet' ) THEN
	1656	ibc_uv_b = 0
	1657	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1658	ibc_uv_b = 1
	1659	IF ( prandtl_layer ) THEN
[215]	1660	message_string = 'boundary condition: bc_uv_b = "' // &
	1661	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1662	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1663	ENDIF
	1664	ELSE
[215]	1665	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1666	TRIM( bc_uv_b ) // '"'
[226]	1667	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1668	ENDIF
[667]	1669	!
	1670	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1671	!-- assigned with the u and v values of the ocean surface
	1672	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1673	ibc_uv_b = 2
	1674	ENDIF
[215]	1675
[108]	1676	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1677	bc_uv_t = 'neumann'
[1]	1678	ibc_uv_t = 1
	1679	ELSE
[132]	1680	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1681	ibc_uv_t = 0
[767]	1682	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1683	!
	1684	!-- Velocities for the initial u,v-profiles are set zero at the top
	1685	!-- in case of dirichlet_0 conditions
	1686	u_init(nzt+1) = 0.0
	1687	v_init(nzt+1) = 0.0
	1688	ENDIF
[108]	1689	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1690	ibc_uv_t = 1
	1691	ELSE
[215]	1692	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1693	TRIM( bc_uv_t ) // '"'
[226]	1694	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1695	ENDIF
	1696	ENDIF
	1697
	1698	!
	1699	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1700	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1701	IF ( momentum_advec == 'ups-scheme' ) THEN
	1702	rayleigh_damping_factor = 0.01
	1703	ELSE
	1704	rayleigh_damping_factor = 0.0
	1705	ENDIF
	1706	ELSE
	1707	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1708	THEN
[215]	1709	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1710	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1711	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1712	ENDIF
	1713	ENDIF
	1714
	1715	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1716	IF ( .NOT. ocean ) THEN
	1717	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1718	ELSE
	1719	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1720	ENDIF
[1]	1721	ELSE
[108]	1722	IF ( .NOT. ocean ) THEN
	1723	IF ( rayleigh_damping_height < 0.0 .OR. &
	1724	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1725	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1726	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1727	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1728	ENDIF
[108]	1729	ELSE
	1730	IF ( rayleigh_damping_height > 0.0 .OR. &
	1731	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1732	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1733	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1734	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1735	ENDIF
[1]	1736	ENDIF
	1737	ENDIF
	1738
	1739	!
	1740	!-- Check limiters for Upstream-Spline scheme
	1741	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1742	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1743	overshoot_limit_e < 0.0 ) THEN
[215]	1744	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1745	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1746	ENDIF
	1747	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1748	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1749	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1750	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1751	ENDIF
	1752
	1753	!
	1754	!-- Check number of chosen statistic regions. More than 10 regions are not
	1755	!-- allowed, because so far no more than 10 corresponding output files can
	1756	!-- be opened (cf. check_open)
	1757	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1758	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1759	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1760	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1761	ENDIF
	1762	IF ( normalizing_region > statistic_regions .OR. &
	1763	normalizing_region < 0) THEN
[215]	1764	WRITE ( message_string, * ) 'normalizing_region = ', &
	1765	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1766	' (value of statistic_regions)'
[226]	1767	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1768	ENDIF
	1769
	1770	!
[116]	1771	!-- Check the interval for sorting particles.
	1772	!-- Using particles as cloud droplets requires sorting after each timestep.
	1773	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1774	dt_sort_particles = 0.0
[215]	1775	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1776	'_droplets = .TRUE.'
[226]	1777	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1778	ENDIF
	1779
	1780	!
[1]	1781	!-- Set the default intervals for data output, if necessary
	1782	!-- NOTE: dt_dosp has already been set in package_parin
	1783	IF ( dt_data_output /= 9999999.9 ) THEN
	1784	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1785	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1786	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1787	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1788	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1789	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1790	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1791	DO mid = 1, max_masks
[410]	1792	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1793	ENDDO
[1]	1794	ENDIF
	1795
	1796	!
	1797	!-- Set the default skip time intervals for data output, if necessary
	1798	IF ( skip_time_dopr == 9999999.9 ) &
	1799	skip_time_dopr = skip_time_data_output
	1800	IF ( skip_time_dosp == 9999999.9 ) &
	1801	skip_time_dosp = skip_time_data_output
	1802	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1803	skip_time_do2d_xy = skip_time_data_output
	1804	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1805	skip_time_do2d_xz = skip_time_data_output
	1806	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1807	skip_time_do2d_yz = skip_time_data_output
	1808	IF ( skip_time_do3d == 9999999.9 ) &
	1809	skip_time_do3d = skip_time_data_output
	1810	IF ( skip_time_data_output_av == 9999999.9 ) &
	1811	skip_time_data_output_av = skip_time_data_output
[564]	1812	DO mid = 1, max_masks
[410]	1813	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1814	skip_time_domask(mid) = skip_time_data_output
	1815	ENDDO
[1]	1816
	1817	!
	1818	!-- Check the average intervals (first for 3d-data, then for profiles and
	1819	!-- spectra)
	1820	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1821	WRITE( message_string, * ) 'averaging_interval = ', &
	1822	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1823	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1824	ENDIF
	1825
	1826	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1827	averaging_interval_pr = averaging_interval
	1828	ENDIF
	1829
	1830	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1831	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1832	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1833	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1834	ENDIF
	1835
	1836	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1837	averaging_interval_sp = averaging_interval
	1838	ENDIF
	1839
	1840	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1841	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1842	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1843	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1844	ENDIF
	1845
	1846	!
	1847	!-- Set the default interval for profiles entering the temporal average
	1848	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1849	dt_averaging_input_pr = dt_averaging_input
	1850	ENDIF
	1851
	1852	!
	1853	!-- Set the default interval for the output of timeseries to a reasonable
	1854	!-- value (tries to minimize the number of calls of flow_statistics)
	1855	IF ( dt_dots == 9999999.9 ) THEN
	1856	IF ( averaging_interval_pr == 0.0 ) THEN
	1857	dt_dots = MIN( dt_run_control, dt_dopr )
	1858	ELSE
	1859	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1860	ENDIF
	1861	ENDIF
	1862
	1863	!
	1864	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1865	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1866	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1867	dt_averaging_input, ' must be <= averaging_interval = ', &
	1868	averaging_interval
[226]	1869	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1870	ENDIF
	1871
	1872	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1873	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1874	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1875	averaging_interval_pr
[226]	1876	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1877	ENDIF
	1878
	1879	!
[72]	1880	!-- Set the default value for the integration interval of precipitation amount
	1881	IF ( precipitation ) THEN
	1882	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1883	precipitation_amount_interval = dt_do2d_xy
	1884	ELSE
	1885	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1886	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1887	precipitation_amount_interval, ' must not be larger than ', &
	1888	'dt_do2d_xy = ', dt_do2d_xy
[226]	1889	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1890	ENDIF
	1891	ENDIF
	1892	ENDIF
	1893
	1894	!
[1]	1895	!-- Determine the number of output profiles and check whether they are
	1896	!-- permissible
	1897	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1898
	1899	dopr_n = dopr_n + 1
	1900	i = dopr_n
	1901
	1902	!
	1903	!-- Determine internal profile number (for hom, homs)
	1904	!-- and store height levels
	1905	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1906
	1907	CASE ( 'u', '#u' )
	1908	dopr_index(i) = 1
[87]	1909	dopr_unit(i) = 'm/s'
[1]	1910	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1911	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1912	dopr_initial_index(i) = 5
	1913	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1914	data_output_pr(i) = data_output_pr(i)(2:)
	1915	ENDIF
	1916
	1917	CASE ( 'v', '#v' )
	1918	dopr_index(i) = 2
[87]	1919	dopr_unit(i) = 'm/s'
	1920	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1921	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1922	dopr_initial_index(i) = 6
	1923	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1924	data_output_pr(i) = data_output_pr(i)(2:)
	1925	ENDIF
	1926
	1927	CASE ( 'w' )
	1928	dopr_index(i) = 3
[87]	1929	dopr_unit(i) = 'm/s'
	1930	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1931
	1932	CASE ( 'pt', '#pt' )
	1933	IF ( .NOT. cloud_physics ) THEN
	1934	dopr_index(i) = 4
[87]	1935	dopr_unit(i) = 'K'
[1]	1936	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1937	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1938	dopr_initial_index(i) = 7
	1939	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1940	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1941	data_output_pr(i) = data_output_pr(i)(2:)
	1942	ENDIF
	1943	ELSE
	1944	dopr_index(i) = 43
[87]	1945	dopr_unit(i) = 'K'
[1]	1946	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1947	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1948	dopr_initial_index(i) = 28
	1949	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1950	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1951	data_output_pr(i) = data_output_pr(i)(2:)
	1952	ENDIF
	1953	ENDIF
	1954
	1955	CASE ( 'e' )
	1956	dopr_index(i) = 8
[87]	1957	dopr_unit(i) = 'm2/s2'
[1]	1958	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1959	hom(nzb,2,8,:) = 0.0
	1960
	1961	CASE ( 'km', '#km' )
	1962	dopr_index(i) = 9
[87]	1963	dopr_unit(i) = 'm2/s'
[1]	1964	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1965	hom(nzb,2,9,:) = 0.0
	1966	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1967	dopr_initial_index(i) = 23
	1968	hom(:,2,23,:) = hom(:,2,9,:)
	1969	data_output_pr(i) = data_output_pr(i)(2:)
	1970	ENDIF
	1971
	1972	CASE ( 'kh', '#kh' )
	1973	dopr_index(i) = 10
[87]	1974	dopr_unit(i) = 'm2/s'
[1]	1975	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1976	hom(nzb,2,10,:) = 0.0
	1977	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1978	dopr_initial_index(i) = 24
	1979	hom(:,2,24,:) = hom(:,2,10,:)
	1980	data_output_pr(i) = data_output_pr(i)(2:)
	1981	ENDIF
	1982
	1983	CASE ( 'l', '#l' )
	1984	dopr_index(i) = 11
[87]	1985	dopr_unit(i) = 'm'
[1]	1986	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1987	hom(nzb,2,11,:) = 0.0
	1988	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1989	dopr_initial_index(i) = 25
	1990	hom(:,2,25,:) = hom(:,2,11,:)
	1991	data_output_pr(i) = data_output_pr(i)(2:)
	1992	ENDIF
	1993
	1994	CASE ( 'w"u"' )
	1995	dopr_index(i) = 12
[87]	1996	dopr_unit(i) = 'm2/s2'
[1]	1997	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1998	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1999
	2000	CASE ( 'wu' )
	2001	dopr_index(i) = 13
[87]	2002	dopr_unit(i) = 'm2/s2'
[1]	2003	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	2004
	2005	CASE ( 'w"v"' )
	2006	dopr_index(i) = 14
[87]	2007	dopr_unit(i) = 'm2/s2'
[1]	2008	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	2009	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	2010
	2011	CASE ( 'wv' )
	2012	dopr_index(i) = 15
[87]	2013	dopr_unit(i) = 'm2/s2'
[1]	2014	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	2015
	2016	CASE ( 'w"pt"' )
	2017	dopr_index(i) = 16
[87]	2018	dopr_unit(i) = 'K m/s'
[1]	2019	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	2020
	2021	CASE ( 'wpt' )
	2022	dopr_index(i) = 17
[87]	2023	dopr_unit(i) = 'K m/s'
[1]	2024	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	2025
	2026	CASE ( 'wpt' )
	2027	dopr_index(i) = 18
[87]	2028	dopr_unit(i) = 'K m/s'
[1]	2029	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	2030
	2031	CASE ( 'wu' )
	2032	dopr_index(i) = 19
[87]	2033	dopr_unit(i) = 'm2/s2'
[1]	2034	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	2035	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	2036
	2037	CASE ( 'wv' )
	2038	dopr_index(i) = 20
[87]	2039	dopr_unit(i) = 'm2/s2'
[1]	2040	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2041	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2042
	2043	CASE ( 'wptBC' )
	2044	dopr_index(i) = 21
[87]	2045	dopr_unit(i) = 'K m/s'
[1]	2046	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2047
	2048	CASE ( 'wptBC' )
	2049	dopr_index(i) = 22
[87]	2050	dopr_unit(i) = 'K m/s'
[1]	2051	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2052
[96]	2053	CASE ( 'sa', '#sa' )
	2054	IF ( .NOT. ocean ) THEN
[215]	2055	message_string = 'data_output_pr = ' // &
	2056	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2057	'lemented for ocean = .FALSE.'
[226]	2058	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2059	ELSE
	2060	dopr_index(i) = 23
	2061	dopr_unit(i) = 'psu'
	2062	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2063	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2064	dopr_initial_index(i) = 26
	2065	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2066	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2067	data_output_pr(i) = data_output_pr(i)(2:)
	2068	ENDIF
	2069	ENDIF
	2070
[1]	2071	CASE ( 'u*2' )
	2072	dopr_index(i) = 30
[87]	2073	dopr_unit(i) = 'm2/s2'
[1]	2074	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2075
	2076	CASE ( 'v*2' )
	2077	dopr_index(i) = 31
[87]	2078	dopr_unit(i) = 'm2/s2'
[1]	2079	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2080
	2081	CASE ( 'w*2' )
	2082	dopr_index(i) = 32
[87]	2083	dopr_unit(i) = 'm2/s2'
[1]	2084	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2085
	2086	CASE ( 'pt*2' )
	2087	dopr_index(i) = 33
[87]	2088	dopr_unit(i) = 'K2'
[1]	2089	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2090
	2091	CASE ( 'e*' )
	2092	dopr_index(i) = 34
[87]	2093	dopr_unit(i) = 'm2/s2'
[1]	2094	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2095
	2096	CASE ( 'w2pt' )
	2097	dopr_index(i) = 35
[87]	2098	dopr_unit(i) = 'K m2/s2'
[1]	2099	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2100
	2101	CASE ( 'wpt2' )
	2102	dopr_index(i) = 36
[87]	2103	dopr_unit(i) = 'K2 m/s'
[1]	2104	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2105
	2106	CASE ( 'we' )
	2107	dopr_index(i) = 37
[87]	2108	dopr_unit(i) = 'm3/s3'
[1]	2109	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2110
	2111	CASE ( 'w*3' )
	2112	dopr_index(i) = 38
[87]	2113	dopr_unit(i) = 'm3/s3'
[1]	2114	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2115
	2116	CASE ( 'Sw' )
	2117	dopr_index(i) = 39
[89]	2118	dopr_unit(i) = 'none'
[1]	2119	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2120
[232]	2121	CASE ( 'p' )
	2122	dopr_index(i) = 40
	2123	dopr_unit(i) = 'Pa'
	2124	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2125
[1]	2126	CASE ( 'q', '#q' )
[108]	2127	IF ( .NOT. humidity ) THEN
[215]	2128	message_string = 'data_output_pr = ' // &
	2129	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2130	'lemented for humidity = .FALSE.'
[226]	2131	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2132	ELSE
	2133	dopr_index(i) = 41
[87]	2134	dopr_unit(i) = 'kg/kg'
	2135	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2136	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2137	dopr_initial_index(i) = 26
	2138	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2139	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2140	data_output_pr(i) = data_output_pr(i)(2:)
	2141	ENDIF
	2142	ENDIF
	2143
	2144	CASE ( 's', '#s' )
	2145	IF ( .NOT. passive_scalar ) THEN
[215]	2146	message_string = 'data_output_pr = ' // &
	2147	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2148	'lemented for passive_scalar = .FALSE.'
[226]	2149	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2150	ELSE
	2151	dopr_index(i) = 41
[87]	2152	dopr_unit(i) = 'kg/m3'
	2153	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2154	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2155	dopr_initial_index(i) = 26
	2156	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2157	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2158	data_output_pr(i) = data_output_pr(i)(2:)
	2159	ENDIF
	2160	ENDIF
	2161
	2162	CASE ( 'qv', '#qv' )
	2163	IF ( .NOT. cloud_physics ) THEN
	2164	dopr_index(i) = 41
[87]	2165	dopr_unit(i) = 'kg/kg'
	2166	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2167	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2168	dopr_initial_index(i) = 26
	2169	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2170	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2171	data_output_pr(i) = data_output_pr(i)(2:)
	2172	ENDIF
	2173	ELSE
	2174	dopr_index(i) = 42
[87]	2175	dopr_unit(i) = 'kg/kg'
	2176	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2177	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2178	dopr_initial_index(i) = 27
	2179	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2180	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2181	data_output_pr(i) = data_output_pr(i)(2:)
	2182	ENDIF
	2183	ENDIF
	2184
	2185	CASE ( 'lpt', '#lpt' )
	2186	IF ( .NOT. cloud_physics ) THEN
[215]	2187	message_string = 'data_output_pr = ' // &
	2188	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2189	'lemented for cloud_physics = .FALSE.'
[226]	2190	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2191	ELSE
	2192	dopr_index(i) = 4
[87]	2193	dopr_unit(i) = 'K'
[1]	2194	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2195	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2196	dopr_initial_index(i) = 7
	2197	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2198	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2199	data_output_pr(i) = data_output_pr(i)(2:)
	2200	ENDIF
	2201	ENDIF
	2202
	2203	CASE ( 'vpt', '#vpt' )
	2204	dopr_index(i) = 44
[87]	2205	dopr_unit(i) = 'K'
	2206	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2207	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2208	dopr_initial_index(i) = 29
	2209	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2210	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2211	data_output_pr(i) = data_output_pr(i)(2:)
	2212	ENDIF
	2213
	2214	CASE ( 'w"vpt"' )
	2215	dopr_index(i) = 45
[87]	2216	dopr_unit(i) = 'K m/s'
[1]	2217	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2218
	2219	CASE ( 'wvpt' )
	2220	dopr_index(i) = 46
[87]	2221	dopr_unit(i) = 'K m/s'
[1]	2222	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2223
	2224	CASE ( 'wvpt' )
	2225	dopr_index(i) = 47
[87]	2226	dopr_unit(i) = 'K m/s'
[1]	2227	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2228
	2229	CASE ( 'w"q"' )
[108]	2230	IF ( .NOT. humidity ) THEN
[215]	2231	message_string = 'data_output_pr = ' // &
	2232	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2233	'lemented for humidity = .FALSE.'
[226]	2234	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2235	ELSE
	2236	dopr_index(i) = 48
[87]	2237	dopr_unit(i) = 'kg/kg m/s'
[1]	2238	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2239	ENDIF
	2240
	2241	CASE ( 'wq' )
[108]	2242	IF ( .NOT. humidity ) THEN
[215]	2243	message_string = 'data_output_pr = ' // &
	2244	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2245	'lemented for humidity = .FALSE.'
[226]	2246	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2247	ELSE
	2248	dopr_index(i) = 49
[87]	2249	dopr_unit(i) = 'kg/kg m/s'
[1]	2250	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2251	ENDIF
	2252
	2253	CASE ( 'wq' )
[108]	2254	IF ( .NOT. humidity ) THEN
[215]	2255	message_string = 'data_output_pr = ' // &
	2256	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2257	'lemented for humidity = .FALSE.'
[226]	2258	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2259	ELSE
	2260	dopr_index(i) = 50
[87]	2261	dopr_unit(i) = 'kg/kg m/s'
[1]	2262	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2263	ENDIF
	2264
	2265	CASE ( 'w"s"' )
	2266	IF ( .NOT. passive_scalar ) THEN
[215]	2267	message_string = 'data_output_pr = ' // &
	2268	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2269	'lemented for passive_scalar = .FALSE.'
[226]	2270	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2271	ELSE
	2272	dopr_index(i) = 48
[87]	2273	dopr_unit(i) = 'kg/m3 m/s'
[1]	2274	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2275	ENDIF
	2276
	2277	CASE ( 'ws' )
	2278	IF ( .NOT. passive_scalar ) THEN
[215]	2279	message_string = 'data_output_pr = ' // &
	2280	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2281	'lemented for passive_scalar = .FALSE.'
[226]	2282	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2283	ELSE
	2284	dopr_index(i) = 49
[87]	2285	dopr_unit(i) = 'kg/m3 m/s'
[1]	2286	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2287	ENDIF
	2288
	2289	CASE ( 'ws' )
	2290	IF ( .NOT. passive_scalar ) THEN
[215]	2291	message_string = 'data_output_pr = ' // &
	2292	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2293	'lemented for passive_scalar = .FALSE.'
[226]	2294	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2295	ELSE
	2296	dopr_index(i) = 50
[87]	2297	dopr_unit(i) = 'kg/m3 m/s'
[1]	2298	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2299	ENDIF
	2300
	2301	CASE ( 'w"qv"' )
[75]	2302	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2303	THEN
	2304	dopr_index(i) = 48
[87]	2305	dopr_unit(i) = 'kg/kg m/s'
[1]	2306	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2307	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2308	dopr_index(i) = 51
[87]	2309	dopr_unit(i) = 'kg/kg m/s'
[1]	2310	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2311	ELSE
[215]	2312	message_string = 'data_output_pr = ' // &
	2313	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2314	'lemented for cloud_physics = .FALSE. an&' // &
	2315	'd humidity = .FALSE.'
[226]	2316	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2317	ENDIF
	2318
	2319	CASE ( 'wqv' )
[75]	2320	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2321	THEN
	2322	dopr_index(i) = 49
[87]	2323	dopr_unit(i) = 'kg/kg m/s'
[1]	2324	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2325	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2326	dopr_index(i) = 52
[87]	2327	dopr_unit(i) = 'kg/kg m/s'
[1]	2328	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2329	ELSE
[215]	2330	message_string = 'data_output_pr = ' // &
	2331	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2332	'lemented for cloud_physics = .FALSE. an&' // &
	2333	'd humidity = .FALSE.'
[226]	2334	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2335	ENDIF
	2336
	2337	CASE ( 'wqv' )
[75]	2338	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2339	THEN
	2340	dopr_index(i) = 50
[87]	2341	dopr_unit(i) = 'kg/kg m/s'
[1]	2342	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2343	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2344	dopr_index(i) = 53
[87]	2345	dopr_unit(i) = 'kg/kg m/s'
[1]	2346	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2347	ELSE
[215]	2348	message_string = 'data_output_pr = ' // &
	2349	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2350	'lemented for cloud_physics = .FALSE. an&' // &
	2351	'd humidity = .FALSE.'
[226]	2352	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2353	ENDIF
	2354
	2355	CASE ( 'ql' )
	2356	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2357	message_string = 'data_output_pr = ' // &
	2358	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2359	'lemented for cloud_physics = .FALSE. or' // &
	2360	'&cloud_droplets = .FALSE.'
[226]	2361	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2362	ELSE
	2363	dopr_index(i) = 54
[87]	2364	dopr_unit(i) = 'kg/kg'
[1]	2365	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2366	ENDIF
	2367
[524]	2368	CASE ( 'wuu*:dz' )
[1]	2369	dopr_index(i) = 55
[87]	2370	dopr_unit(i) = 'm2/s3'
[1]	2371	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2372
[524]	2373	CASE ( 'wp:dz' )
[1]	2374	dopr_index(i) = 56
[87]	2375	dopr_unit(i) = 'm2/s3'
[106]	2376	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2377
[524]	2378	CASE ( 'w"e:dz' )
[1]	2379	dopr_index(i) = 57
[87]	2380	dopr_unit(i) = 'm2/s3'
[1]	2381	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2382
[667]	2383
[1]	2384	CASE ( 'u"pt"' )
	2385	dopr_index(i) = 58
[87]	2386	dopr_unit(i) = 'K m/s'
[1]	2387	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2388
	2389	CASE ( 'upt' )
	2390	dopr_index(i) = 59
[87]	2391	dopr_unit(i) = 'K m/s'
[1]	2392	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2393
	2394	CASE ( 'upt_t' )
	2395	dopr_index(i) = 60
[87]	2396	dopr_unit(i) = 'K m/s'
[1]	2397	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2398
	2399	CASE ( 'v"pt"' )
	2400	dopr_index(i) = 61
[87]	2401	dopr_unit(i) = 'K m/s'
[1]	2402	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2403
	2404	CASE ( 'vpt' )
	2405	dopr_index(i) = 62
[87]	2406	dopr_unit(i) = 'K m/s'
[1]	2407	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2408
	2409	CASE ( 'vpt_t' )
	2410	dopr_index(i) = 63
[87]	2411	dopr_unit(i) = 'K m/s'
[1]	2412	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2413
[96]	2414	CASE ( 'rho' )
[388]	2415	IF ( .NOT. ocean ) THEN
	2416	message_string = 'data_output_pr = ' // &
	2417	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2418	'lemented for ocean = .FALSE.'
	2419	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2420	ELSE
	2421	dopr_index(i) = 64
	2422	dopr_unit(i) = 'kg/m3'
	2423	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2424	ENDIF
[1]	2425
[96]	2426	CASE ( 'w"sa"' )
	2427	IF ( .NOT. ocean ) THEN
[215]	2428	message_string = 'data_output_pr = ' // &
	2429	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2430	'lemented for ocean = .FALSE.'
[226]	2431	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2432	ELSE
	2433	dopr_index(i) = 65
	2434	dopr_unit(i) = 'psu m/s'
	2435	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2436	ENDIF
	2437
	2438	CASE ( 'wsa' )
	2439	IF ( .NOT. ocean ) THEN
[215]	2440	message_string = 'data_output_pr = ' // &
	2441	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2442	'lemented for ocean = .FALSE.'
[226]	2443	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2444	ELSE
	2445	dopr_index(i) = 66
	2446	dopr_unit(i) = 'psu m/s'
	2447	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2448	ENDIF
	2449
	2450	CASE ( 'wsa' )
	2451	IF ( .NOT. ocean ) THEN
[215]	2452	message_string = 'data_output_pr = ' // &
	2453	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2454	'lemented for ocean = .FALSE.'
[226]	2455	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2456	ELSE
	2457	dopr_index(i) = 67
	2458	dopr_unit(i) = 'psu m/s'
	2459	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2460	ENDIF
	2461
[106]	2462	CASE ( 'wp' )
	2463	dopr_index(i) = 68
	2464	dopr_unit(i) = 'm3/s3'
	2465	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2466
[106]	2467	CASE ( 'w"e' )
	2468	dopr_index(i) = 69
	2469	dopr_unit(i) = 'm3/s3'
	2470	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2471
[197]	2472	CASE ( 'q*2' )
	2473	IF ( .NOT. humidity ) THEN
[215]	2474	message_string = 'data_output_pr = ' // &
	2475	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2476	'lemented for humidity = .FALSE.'
[226]	2477	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2478	ELSE
	2479	dopr_index(i) = 70
	2480	dopr_unit(i) = 'kg2/kg2'
	2481	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2482	ENDIF
[106]	2483
[388]	2484	CASE ( 'prho' )
	2485	IF ( .NOT. ocean ) THEN
	2486	message_string = 'data_output_pr = ' // &
	2487	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2488	'lemented for ocean = .FALSE.'
	2489	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2490	ELSE
	2491	dopr_index(i) = 71
	2492	dopr_unit(i) = 'kg/m3'
	2493	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2494	ENDIF
	2495
	2496	CASE ( 'hyp' )
	2497	dopr_index(i) = 72
[531]	2498	dopr_unit(i) = 'dbar'
[388]	2499	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2500
[1]	2501	CASE DEFAULT
[87]	2502
	2503	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2504
	2505	IF ( unit == 'illegal' ) THEN
[215]	2506	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2507	message_string = 'illegal value for data_output_pr or ' // &
	2508	'data_output_pr_user = "' // &
	2509	TRIM( data_output_pr(i) ) // '"'
[226]	2510	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2511	ELSE
	2512	message_string = 'illegal value for data_output_pr = "' // &
	2513	TRIM( data_output_pr(i) ) // '"'
[226]	2514	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2515	ENDIF
[1]	2516	ENDIF
	2517
	2518	END SELECT
[667]	2519
[1]	2520	!
	2521	!-- Check to which of the predefined coordinate systems the profile belongs
	2522	DO k = 1, crmax
	2523	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2524	/=0 ) &
	2525	THEN
	2526	dopr_crossindex(i) = k
	2527	EXIT
	2528	ENDIF
	2529	ENDDO
	2530	!
	2531	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2532	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2533	!-- control characters
	2534	dopr_label(i) = data_output_pr(i)
	2535	position = INDEX( dopr_label(i) , '"' )
	2536	DO WHILE ( position /= 0 )
	2537	dopr_label(i)(position:position) = ''''
	2538	position = INDEX( dopr_label(i) , '"' )
	2539	ENDDO
	2540
	2541	ENDDO
	2542
	2543	!
	2544	!-- y-value range of the coordinate system (PROFIL).
	2545	!-- x-value range determined in plot_1d.
[94]	2546	IF ( .NOT. ocean ) THEN
	2547	cross_uymin = 0.0
	2548	IF ( z_max_do1d == -1.0 ) THEN
	2549	cross_uymax = zu(nzt+1)
	2550	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2551	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2552	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2553	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2554	ELSE
	2555	cross_uymax = z_max_do1d
	2556	ENDIF
[1]	2557	ENDIF
	2558
	2559	!
	2560	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2561	!-- permissible
	2562	DO i = 1, crmax
	2563	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2564
	2565	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2566	j = 0
	2567
	2568	CASE DEFAULT
[215]	2569	message_string = 'unknown normalization method cross_normali' // &
	2570	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2571	'"'
[226]	2572	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2573
	2574	END SELECT
	2575	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2576
	2577	CASE ( '', 'z_i' )
	2578	j = 0
	2579
	2580	CASE DEFAULT
[215]	2581	message_string = 'unknown normalization method cross_normali' // &
	2582	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2583	'"'
[226]	2584	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2585
	2586	END SELECT
	2587	ENDDO
	2588	!
	2589	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2590	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2591	THEN
[215]	2592	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2593	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2594	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2595	ENDIF
	2596
	2597
	2598	!
	2599	!-- Append user-defined data output variables to the standard data output
	2600	IF ( data_output_user(1) /= ' ' ) THEN
	2601	i = 1
	2602	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2603	i = i + 1
	2604	ENDDO
	2605	j = 1
	2606	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2607	IF ( i > 100 ) THEN
[215]	2608	message_string = 'number of output quantitities given by data' // &
	2609	'_output and data_output_user exceeds the limit of 100'
[226]	2610	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2611	ENDIF
	2612	data_output(i) = data_output_user(j)
	2613	i = i + 1
	2614	j = j + 1
	2615	ENDDO
	2616	ENDIF
	2617
	2618	!
	2619	!-- Check and set steering parameters for 2d/3d data output and averaging
	2620	i = 1
	2621	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2622	!
	2623	!-- Check for data averaging
	2624	ilen = LEN_TRIM( data_output(i) )
	2625	j = 0 ! no data averaging
	2626	IF ( ilen > 3 ) THEN
	2627	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2628	j = 1 ! data averaging
	2629	data_output(i) = data_output(i)(1:ilen-3)
	2630	ENDIF
	2631	ENDIF
	2632	!
	2633	!-- Check for cross section or volume data
	2634	ilen = LEN_TRIM( data_output(i) )
	2635	k = 0 ! 3d data
	2636	var = data_output(i)(1:ilen)
	2637	IF ( ilen > 3 ) THEN
	2638	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2639	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2640	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2641	k = 1 ! 2d data
	2642	var = data_output(i)(1:ilen-3)
	2643	ENDIF
	2644	ENDIF
	2645	!
	2646	!-- Check for allowed value and set units
	2647	SELECT CASE ( TRIM( var ) )
	2648
	2649	CASE ( 'e' )
	2650	IF ( constant_diffusion ) THEN
[215]	2651	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2652	'res constant_diffusion = .FALSE.'
[226]	2653	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2654	ENDIF
	2655	unit = 'm2/s2'
	2656
[771]	2657	CASE ( 'lpt' )
	2658	IF ( .NOT. cloud_physics ) THEN
	2659	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2660	'res cloud_physics = .TRUE.'
	2661	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2662	ENDIF
	2663	unit = 'K'
	2664
[1]	2665	CASE ( 'pc', 'pr' )
	2666	IF ( .NOT. particle_advection ) THEN
[215]	2667	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2668	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2669	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2670	ENDIF
	2671	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2672	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2673
	2674	CASE ( 'q', 'vpt' )
[75]	2675	IF ( .NOT. humidity ) THEN
[215]	2676	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2677	'res humidity = .TRUE.'
[226]	2678	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2679	ENDIF
	2680	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2681	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2682
	2683	CASE ( 'ql' )
	2684	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2685	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2686	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2687	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2688	ENDIF
	2689	unit = 'kg/kg'
	2690
	2691	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2692	IF ( .NOT. cloud_droplets ) THEN
[215]	2693	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2694	'res cloud_droplets = .TRUE.'
[226]	2695	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2696	ENDIF
	2697	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2698	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2699	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2700
	2701	CASE ( 'qv' )
	2702	IF ( .NOT. cloud_physics ) THEN
[215]	2703	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2704	'res cloud_physics = .TRUE.'
[226]	2705	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2706	ENDIF
	2707	unit = 'kg/kg'
	2708
[96]	2709	CASE ( 'rho' )
	2710	IF ( .NOT. ocean ) THEN
[215]	2711	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2712	'res ocean = .TRUE.'
[226]	2713	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2714	ENDIF
	2715	unit = 'kg/m3'
	2716
[1]	2717	CASE ( 's' )
	2718	IF ( .NOT. passive_scalar ) THEN
[215]	2719	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2720	'res passive_scalar = .TRUE.'
[226]	2721	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2722	ENDIF
	2723	unit = 'conc'
	2724
[96]	2725	CASE ( 'sa' )
	2726	IF ( .NOT. ocean ) THEN
[215]	2727	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2728	'res ocean = .TRUE.'
[226]	2729	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2730	ENDIF
	2731	unit = 'psu'
	2732
[354]	2733	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2734	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2735	message_string = 'illegal value for data_output: "' // &
	2736	TRIM( var ) // '" & only 2d-horizontal ' // &
	2737	'cross sections are allowed for this value'
[226]	2738	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2739	ENDIF
	2740	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2741	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2742	'res cloud_physics = .TRUE.'
[226]	2743	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2744	ENDIF
[72]	2745	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2746	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2747	'res precipitation = .TRUE.'
[226]	2748	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2749	ENDIF
	2750	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2751	message_string = 'temporal averaging of precipitation ' // &
	2752	'amount "' // TRIM( var ) // '" is not possible'
[226]	2753	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2754	ENDIF
	2755	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2756	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2757	'res precipitation = .TRUE.'
[226]	2758	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2759	ENDIF
[354]	2760	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2761	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2762	'res humidity = .TRUE.'
	2763	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2764	ENDIF
[72]	2765
[354]	2766	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2767	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2768	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2769	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2770	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2771	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2772	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2773	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2774
[1]	2775
	2776	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2777	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2778	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2779	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2780	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2781	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2782	CONTINUE
	2783
	2784	CASE DEFAULT
	2785	CALL user_check_data_output( var, unit )
	2786
	2787	IF ( unit == 'illegal' ) THEN
[215]	2788	IF ( data_output_user(1) /= ' ' ) THEN
	2789	message_string = 'illegal value for data_output or ' // &
	2790	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2791	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2792	ELSE
	2793	message_string = 'illegal value for data_output =' // &
	2794	TRIM( data_output(i) ) // '"'
[226]	2795	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2796	ENDIF
	2797	ENDIF
	2798
	2799	END SELECT
	2800	!
	2801	!-- Set the internal steering parameters appropriately
	2802	IF ( k == 0 ) THEN
	2803	do3d_no(j) = do3d_no(j) + 1
	2804	do3d(j,do3d_no(j)) = data_output(i)
	2805	do3d_unit(j,do3d_no(j)) = unit
	2806	ELSE
	2807	do2d_no(j) = do2d_no(j) + 1
	2808	do2d(j,do2d_no(j)) = data_output(i)
	2809	do2d_unit(j,do2d_no(j)) = unit
	2810	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2811	data_output_xy(j) = .TRUE.
	2812	ENDIF
	2813	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2814	data_output_xz(j) = .TRUE.
	2815	ENDIF
	2816	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2817	data_output_yz(j) = .TRUE.
	2818	ENDIF
	2819	ENDIF
	2820
	2821	IF ( j == 1 ) THEN
	2822	!
	2823	!-- Check, if variable is already subject to averaging
	2824	found = .FALSE.
	2825	DO k = 1, doav_n
	2826	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2827	ENDDO
	2828
	2829	IF ( .NOT. found ) THEN
	2830	doav_n = doav_n + 1
	2831	doav(doav_n) = var
	2832	ENDIF
	2833	ENDIF
	2834
	2835	i = i + 1
	2836	ENDDO
	2837
	2838	!
[376]	2839	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2840	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2841	WRITE( message_string, * ) 'output of averaged quantity "', &
	2842	TRIM( doav(1) ), '_av" requires to set a ', &
	2843	'non-zero & averaging interval'
	2844	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2845	ENDIF
	2846
	2847	!
[308]	2848	!-- Check sectional planes and store them in one shared array
	2849	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2850	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2851	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2852	ENDIF
	2853	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2854	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2855	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2856	ENDIF
	2857	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2858	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2859	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2860	ENDIF
[1]	2861	section(:,1) = section_xy
	2862	section(:,2) = section_xz
	2863	section(:,3) = section_yz
	2864
	2865	!
	2866	!-- Upper plot limit (grid point value) for 1D profiles
	2867	IF ( z_max_do1d == -1.0 ) THEN
[667]	2868
[1]	2869	nz_do1d = nzt+1
[667]	2870
[1]	2871	ELSE
	2872	DO k = nzb+1, nzt+1
	2873	nz_do1d = k
	2874	IF ( zw(k) > z_max_do1d ) EXIT
	2875	ENDDO
	2876	ENDIF
	2877
	2878	!
	2879	!-- Upper plot limit for 2D vertical sections
	2880	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2881	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2882	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2883	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2884	' (zu(nzt))'
[226]	2885	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2886	ENDIF
	2887
	2888	!
	2889	!-- Upper plot limit for 3D arrays
	2890	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2891
	2892	!
	2893	!-- Determine and check accuracy for compressed 3D plot output
	2894	IF ( do3d_compress ) THEN
	2895	!
	2896	!-- Compression only permissible on T3E machines
	2897	IF ( host(1:3) /= 't3e' ) THEN
[215]	2898	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2899	TRIM( host ) // '"'
[226]	2900	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2901	ENDIF
	2902
	2903	i = 1
	2904	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2905
	2906	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2907	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2908	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2909	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2910	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2911	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2912	ENDIF
	2913
	2914	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2915	var = do3d_comp_prec(i)(1:ilen-1)
	2916
	2917	SELECT CASE ( var )
	2918
	2919	CASE ( 'u' )
	2920	j = 1
	2921	CASE ( 'v' )
	2922	j = 2
	2923	CASE ( 'w' )
	2924	j = 3
	2925	CASE ( 'p' )
	2926	j = 4
	2927	CASE ( 'pt' )
	2928	j = 5
	2929
	2930	CASE DEFAULT
[215]	2931	WRITE( message_string, * ) 'unknown variable "', &
	2932	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2933	i, ')'
[226]	2934	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2935
	2936	END SELECT
	2937
	2938	plot_3d_precision(j)%precision = prec
	2939	i = i + 1
	2940
	2941	ENDDO
	2942	ENDIF
	2943
	2944	!
	2945	!-- Check the data output format(s)
	2946	IF ( data_output_format(1) == ' ' ) THEN
	2947	!
	2948	!-- Default value
	2949	netcdf_output = .TRUE.
	2950	ELSE
	2951	i = 1
	2952	DO WHILE ( data_output_format(i) /= ' ' )
	2953
	2954	SELECT CASE ( data_output_format(i) )
	2955
	2956	CASE ( 'netcdf' )
	2957	netcdf_output = .TRUE.
	2958	CASE ( 'iso2d' )
	2959	iso2d_output = .TRUE.
	2960	CASE ( 'profil' )
	2961	profil_output = .TRUE.
	2962	CASE ( 'avs' )
	2963	avs_output = .TRUE.
	2964
	2965	CASE DEFAULT
[215]	2966	message_string = 'unknown value for data_output_format "' // &
	2967	TRIM( data_output_format(i) ) // '"'
[226]	2968	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2969
	2970	END SELECT
	2971
	2972	i = i + 1
	2973	IF ( i > 10 ) EXIT
	2974
	2975	ENDDO
	2976
	2977	ENDIF
	2978
	2979	!
[410]	2980	!-- Check mask conditions
[553]	2981	DO mid = 1, max_masks
[567]	2982	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	2983	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	2984	masks = masks + 1
	2985	ENDIF
	2986	ENDDO
	2987
[410]	2988	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2989	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2990	'<= ', max_masks, ' (=max_masks)'
[564]	2991	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	2992	ENDIF
	2993	IF ( masks > 0 ) THEN
	2994	mask_scale(1) = mask_scale_x
	2995	mask_scale(2) = mask_scale_y
	2996	mask_scale(3) = mask_scale_z
	2997	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2998	WRITE( message_string, * ) &
	2999	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	3000	'must be > 0.0'
[564]	3001	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	3002	ENDIF
	3003	!
	3004	!-- Generate masks for masked data output
	3005	CALL init_masks
	3006	ENDIF
	3007
	3008	!
[493]	3009	!-- Check the NetCDF data format
[924]	3010	#if ! defined ( __check )
[493]	3011	IF ( netcdf_data_format > 2 ) THEN
[924]	3012	#if defined( __netcdf4 )
[493]	3013	CONTINUE
	3014	#else
	3015	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
	3016	'cpp-directive __netcdf4 given & switch ' // &
	3017	'back to 64-bit offset format'
	3018	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	3019	netcdf_data_format = 2
	3020	#endif
	3021	ENDIF
[892]	3022	#endif
[493]	3023	!
[667]	3024
[809]	3025	#if ! defined( __check )
[1]	3026	!-- Check netcdf precison
	3027	ldum = .FALSE.
	3028	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	3029	#endif
[1]	3030	!
	3031	!-- Check, whether a constant diffusion coefficient shall be used
	3032	IF ( km_constant /= -1.0 ) THEN
	3033	IF ( km_constant < 0.0 ) THEN
[215]	3034	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	3035	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	3036	ELSE
	3037	IF ( prandtl_number < 0.0 ) THEN
[215]	3038	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	3039	' < 0.0'
[226]	3040	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	3041	ENDIF
	3042	constant_diffusion = .TRUE.
	3043
	3044	IF ( prandtl_layer ) THEN
[215]	3045	message_string = 'prandtl_layer is not allowed with fixed ' // &
	3046	'value of km'
[226]	3047	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	3048	ENDIF
	3049	ENDIF
	3050	ENDIF
	3051
	3052	!
	3053	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	3054	!-- for the horizontal diffusivity used within the outflow damping layer,
	3055	!-- and check/set the width of the damping layer
	3056	IF ( bc_lr /= 'cyclic' ) THEN
	3057	IF ( km_damp_max == -1.0 ) THEN
	3058	km_damp_max = 0.5 * dx
	3059	ENDIF
	3060	IF ( outflow_damping_width == -1.0 ) THEN
	3061	outflow_damping_width = MIN( 20, nx/2 )
	3062	ENDIF
	3063	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	3064	message_string = 'outflow_damping width out of range'
[226]	3065	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3066	ENDIF
	3067	ENDIF
	3068
	3069	IF ( bc_ns /= 'cyclic' ) THEN
	3070	IF ( km_damp_max == -1.0 ) THEN
	3071	km_damp_max = 0.5 * dy
	3072	ENDIF
	3073	IF ( outflow_damping_width == -1.0 ) THEN
	3074	outflow_damping_width = MIN( 20, ny/2 )
	3075	ENDIF
	3076	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	3077	message_string = 'outflow_damping width out of range'
[226]	3078	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3079	ENDIF
	3080	ENDIF
	3081
	3082	!
	3083	!-- Check value range for rif
	3084	IF ( rif_min >= rif_max ) THEN
[215]	3085	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3086	'than rif_max = ', rif_max
[226]	3087	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3088	ENDIF
	3089
	3090	!
	3091	!-- Determine upper and lower hight level indices for random perturbations
[97]	3092	IF ( disturbance_level_b == -9999999.9 ) THEN
	3093	IF ( ocean ) THEN
	3094	disturbance_level_b = zu((nzt*2)/3)
	3095	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3096	ELSE
	3097	disturbance_level_b = zu(nzb+3)
	3098	disturbance_level_ind_b = nzb + 3
	3099	ENDIF
[1]	3100	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3101	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3102	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3103	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3104	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3105	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3106	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3107	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3108	ELSE
	3109	DO k = 3, nzt-2
	3110	IF ( disturbance_level_b <= zu(k) ) THEN
	3111	disturbance_level_ind_b = k
	3112	EXIT
	3113	ENDIF
	3114	ENDDO
	3115	ENDIF
	3116
[97]	3117	IF ( disturbance_level_t == -9999999.9 ) THEN
	3118	IF ( ocean ) THEN
	3119	disturbance_level_t = zu(nzt-3)
	3120	disturbance_level_ind_t = nzt - 3
	3121	ELSE
	3122	disturbance_level_t = zu(nzt/3)
	3123	disturbance_level_ind_t = nzt / 3
	3124	ENDIF
[1]	3125	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3126	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3127	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3128	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3129	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3130	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3131	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3132	disturbance_level_b
[226]	3133	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3134	ELSE
	3135	DO k = 3, nzt-2
	3136	IF ( disturbance_level_t <= zu(k) ) THEN
	3137	disturbance_level_ind_t = k
	3138	EXIT
	3139	ENDIF
	3140	ENDDO
	3141	ENDIF
	3142
	3143	!
	3144	!-- Check again whether the levels determined this way are ok.
	3145	!-- Error may occur at automatic determination and too few grid points in
	3146	!-- z-direction.
	3147	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3148	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3149	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3150	disturbance_level_b
[226]	3151	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3152	ENDIF
	3153
	3154	!
	3155	!-- Determine the horizontal index range for random perturbations.
	3156	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3157	!-- near the inflow and the perturbation area is further limited to ...(1)
	3158	!-- after the initial phase of the flow.
	3159	dist_nxl = 0; dist_nxr = nx
	3160	dist_nys = 0; dist_nyn = ny
	3161	IF ( bc_lr /= 'cyclic' ) THEN
	3162	IF ( inflow_disturbance_begin == -1 ) THEN
	3163	inflow_disturbance_begin = MIN( 10, nx/2 )
	3164	ENDIF
	3165	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3166	THEN
[215]	3167	message_string = 'inflow_disturbance_begin out of range'
[226]	3168	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3169	ENDIF
	3170	IF ( inflow_disturbance_end == -1 ) THEN
	3171	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3172	ENDIF
	3173	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3174	THEN
[215]	3175	message_string = 'inflow_disturbance_end out of range'
[226]	3176	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3177	ENDIF
	3178	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3179	IF ( inflow_disturbance_begin == -1 ) THEN
	3180	inflow_disturbance_begin = MIN( 10, ny/2 )
	3181	ENDIF
	3182	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3183	THEN
[215]	3184	message_string = 'inflow_disturbance_begin out of range'
[226]	3185	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3186	ENDIF
	3187	IF ( inflow_disturbance_end == -1 ) THEN
	3188	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3189	ENDIF
	3190	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3191	THEN
[215]	3192	message_string = 'inflow_disturbance_end out of range'
[226]	3193	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3194	ENDIF
	3195	ENDIF
	3196
[73]	3197	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3198	dist_nxr = nx - inflow_disturbance_begin
	3199	dist_nxl(1) = nx - inflow_disturbance_end
[73]	3200	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3201	dist_nxl = inflow_disturbance_begin
	3202	dist_nxr(1) = inflow_disturbance_end
[73]	3203	ENDIF
	3204	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3205	dist_nyn = ny - inflow_disturbance_begin
	3206	dist_nys(1) = ny - inflow_disturbance_end
[73]	3207	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3208	dist_nys = inflow_disturbance_begin
	3209	dist_nyn(1) = inflow_disturbance_end
	3210	ENDIF
	3211
	3212	!
[151]	3213	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3214	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	3215	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3216	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3217	'condition at the inflow boundary'
[226]	3218	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3219	ENDIF
	3220
	3221	!
	3222	!-- In case of turbulent inflow calculate the index of the recycling plane
	3223	IF ( turbulent_inflow ) THEN
	3224	IF ( recycling_width == 9999999.9 ) THEN
	3225	!
	3226	!-- Set the default value for the width of the recycling domain
	3227	recycling_width = 0.1 * nx * dx
	3228	ELSE
	3229	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3230	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3231	' ', recycling_width
[226]	3232	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3233	ENDIF
	3234	ENDIF
	3235	!
	3236	!-- Calculate the index
	3237	recycling_plane = recycling_width / dx
	3238	ENDIF
	3239
	3240	!
[1]	3241	!-- Check random generator
	3242	IF ( random_generator /= 'system-specific' .AND. &
	3243	random_generator /= 'numerical-recipes' ) THEN
[215]	3244	message_string = 'unknown random generator: random_generator = "' // &
	3245	TRIM( random_generator ) // '"'
[226]	3246	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3247	ENDIF
	3248
	3249	!
	3250	!-- Determine damping level index for 1D model
	3251	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3252	IF ( damp_level_1d == -1.0 ) THEN
	3253	damp_level_1d = zu(nzt+1)
	3254	damp_level_ind_1d = nzt + 1
	3255	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3256	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3257	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3258	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3259	ELSE
	3260	DO k = 1, nzt+1
	3261	IF ( damp_level_1d <= zu(k) ) THEN
	3262	damp_level_ind_1d = k
	3263	EXIT
	3264	ENDIF
	3265	ENDDO
	3266	ENDIF
	3267	ENDIF
[215]	3268
[1]	3269	!
	3270	!-- Check some other 1d-model parameters
	3271	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3272	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3273	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3274	'" is unknown'
[226]	3275	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3276	ENDIF
	3277	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3278	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3279	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3280	'" is unknown'
[226]	3281	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3282	ENDIF
	3283
	3284	!
	3285	!-- Set time for the next user defined restart (time_restart is the
	3286	!-- internal parameter for steering restart events)
	3287	IF ( restart_time /= 9999999.9 ) THEN
[291]	3288	IF ( restart_time > time_since_reference_point ) THEN
	3289	time_restart = restart_time
	3290	ENDIF
[1]	3291	ELSE
	3292	!
	3293	!-- In case of a restart run, set internal parameter to default (no restart)
	3294	!-- if the NAMELIST-parameter restart_time is omitted
	3295	time_restart = 9999999.9
	3296	ENDIF
	3297
	3298	!
	3299	!-- Set default value of the time needed to terminate a model run
	3300	IF ( termination_time_needed == -1.0 ) THEN
	3301	IF ( host(1:3) == 'ibm' ) THEN
	3302	termination_time_needed = 300.0
	3303	ELSE
	3304	termination_time_needed = 35.0
	3305	ENDIF
	3306	ENDIF
	3307
	3308	!
	3309	!-- Check the time needed to terminate a model run
	3310	IF ( host(1:3) == 't3e' ) THEN
	3311	!
	3312	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3313	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3314	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3315	WRITE( message_string, * ) 'termination_time_needed = ', &
	3316	termination_time_needed, ' must be > 30.0 on host "', &
	3317	TRIM( host ), '"'
[226]	3318	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3319	ENDIF
	3320	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3321	!
	3322	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3323	!-- because the job time consumed before executing palm (for compiling,
	3324	!-- copying of files, etc.) has to be regarded
	3325	IF ( termination_time_needed < 300.0 ) THEN
[215]	3326	WRITE( message_string, * ) 'termination_time_needed = ', &
	3327	termination_time_needed, ' should be >= 300.0 on host "', &
	3328	TRIM( host ), '"'
[226]	3329	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3330	ENDIF
	3331	ENDIF
	3332
[217]	3333	!
[240]	3334	!-- Check pressure gradient conditions
	3335	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3336	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3337	'w are .TRUE. but one of them must be .FALSE.'
[240]	3338	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3339	ENDIF
	3340	IF ( dp_external ) THEN
	3341	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3342	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3343	' of range'
	3344	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3345	ENDIF
	3346	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3347	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3348	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3349	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3350	ENDIF
	3351	ENDIF
	3352	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3353	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3354	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3355	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3356	ENDIF
[241]	3357	IF ( conserve_volume_flow ) THEN
	3358	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3359
	3360	conserve_volume_flow_mode = 'initial_profiles'
	3361
[241]	3362	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3363	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3364	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3365	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3366	conserve_volume_flow_mode
	3367	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3368	ENDIF
[667]	3369	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3370	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3371	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3372	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3373	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3374	ENDIF
	3375	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3376	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3377	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3378	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3379	' or ''bulk_velocity'''
	3380	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3381	ENDIF
	3382	ENDIF
	3383	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3384	( .NOT. conserve_volume_flow .OR. &
	3385	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3386	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3387	'conserve_volume_flow = .T. and ', &
[241]	3388	'conserve_volume_flow_mode = ''bulk_velocity'''
	3389	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3390	ENDIF
[240]	3391
	3392	!
[264]	3393	!-- Check particle attributes
	3394	IF ( particle_color /= 'none' ) THEN
	3395	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3396	particle_color /= 'z' ) THEN
	3397	message_string = 'illegal value for parameter particle_color: ' // &
	3398	TRIM( particle_color)
	3399	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3400	ELSE
	3401	IF ( color_interval(2) <= color_interval(1) ) THEN
	3402	message_string = 'color_interval(2) <= color_interval(1)'
	3403	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3404	ENDIF
	3405	ENDIF
	3406	ENDIF
	3407
	3408	IF ( particle_dvrpsize /= 'none' ) THEN
	3409	IF ( particle_dvrpsize /= 'absw' ) THEN
	3410	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3411	' ' // TRIM( particle_color)
	3412	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3413	ELSE
	3414	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3415	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3416	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3417	ENDIF
	3418	ENDIF
	3419	ENDIF
	3420
	3421	!
[217]	3422	!-- Check &userpar parameters
	3423	CALL user_check_parameters
[1]	3424
[217]	3425
[667]	3426
[1]	3427	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |