Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 924

Last change on this file since 924 was 924, checked in by maronga, 12 years ago
bugfix in check_parameters.f90
Property svn:keywords set to `Id`
File size: 131.9 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[924]	6	! Bugfix: preprocessor directives caused error during compilation
[667]	7	!
[668]	8	! Former revisions:
	9	! -----------------
[708]	10	! $Id: check_parameters.f90 924 2012-06-06 07:44:41Z maronga $
[687]	11	!
[893]	12	! 892 2012-05-02 13:51:44Z maronga
	13	! Bugfix for parameter file check ( excluding __netcdf4 )
	14	!
[867]	15	! 866 2012-03-28 06:44:41Z raasch
	16	! use only 60% of the geostrophic wind as translation speed in case of Galilean
	17	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
	18	! timestep
	19	!
[863]	20	! 861 2012-03-26 14:18:34Z suehring
	21	! Check for topography and ws-scheme removed.
	22	! Check for loop_optimization = 'vector' and ws-scheme removed.
	23	!
[846]	24	! 845 2012-03-07 10:23:05Z maronga
	25	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	26	!
[829]	27	! 828 2012-02-21 12:00:36Z raasch
	28	! check of collision_kernel extended
	29	!
[826]	30	! 825 2012-02-19 03:03:44Z raasch
	31	! check for collision_kernel and curvature_solution_effects
	32	!
[810]	33	! 809 2012-01-30 13:32:58Z maronga
	34	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	35	!
[808]	36	! 807 2012-01-25 11:53:51Z maronga
	37	! New cpp directive "__check" implemented which is used by check_namelist_files
	38	!
[775]	39	! 774 2011-10-27 13:34:16Z letzel
	40	! bugfix for prescribed u,v-profiles
	41	!
[768]	42	! 767 2011-10-14 06:39:12Z raasch
	43	! Calculating u,v-profiles from given profiles by linear interpolation.
	44	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	45	!
[708]	46	! 707 2011-03-29 11:39:40Z raasch
	47	! setting of bc_lr/ns_dirrad/raddir
	48	!
	49	! 689 2011-02-20 19:31:12z gryschka
[690]	50	! Bugfix for some logical expressions
	51	! (syntax was not compatible with all compilers)
[687]	52	!
[690]	53	! 680 2011-02-04 23:16:06Z gryschka
[681]	54	! init_vortex is not allowed with volume_flow_control
[668]	55	!
[674]	56	! 673 2011-01-18 16:19:48Z suehring
	57	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	58	!
[668]	59	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	60	! Exchange of parameters between ocean and atmosphere via PE0
	61	! Check for illegal combination of ws-scheme and timestep scheme.
	62	! Check for topography and ws-scheme.
	63	! Check for not cyclic boundary conditions in combination with ws-scheme and
	64	! loop_optimization = 'vector'.
	65	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	66	! Different processor/grid topology in atmosphere and ocean is now allowed!
	67	! Bugfixes in checking for conserve_volume_flow_mode
[601]	68	! 600 2010-11-24 16:10:51Z raasch
	69	! change due to new default value of surface_waterflux
[581]	70	! 580 2010-10-05 13:59:11Z heinze
[601]	71	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	72	!
[568]	73	! 567 2010-10-01 10:46:30Z helmke
	74	! calculating masks changed
	75	!
[565]	76	! 564 2010-09-30 13:18:59Z helmke
	77	! palm message identifiers of masked output changed, 20 replaced by max_masks
	78	!
[554]	79	! 553 2010-09-01 14:09:06Z weinreis
	80	! masks is calculated and removed from inipar
[532]	81	!
	82	! 531 2010-04-21 06:47:21Z heinze
	83	! Bugfix: unit of hyp changed to dbar
[392]	84	!
[525]	85	! 524 2010-03-30 02:04:51Z raasch
	86	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	87	!
[494]	88	! 493 2010-03-01 08:30:24Z raasch
	89	! netcdf_data_format is checked
	90	!
[449]	91	! 411 2009-12-11 14:15:58Z heinze
	92	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	93	! Initialization of large scale vertical motion (subsidence/ascent)
	94	!
	95	! 410 2009-12-04 17:05:40Z letzel
	96	! masked data output
	97	!
[392]	98	! 388 2009-09-23 09:40:33Z raasch
[388]	99	! Check profiles fpr prho and hyp.
[376]	100	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	101	! interval has been set, respective error message is included
[366]	102	! bc_lr_cyc and bc_ns_cyc are set,
[328]	103	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	104	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	105	! Coupling with independent precursor runs.
[264]	106	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	107	! Bugfix: pressure included for profile output
[240]	108	! Check pressure gradient conditions
[256]	109	! topography_grid_convention moved from user_check_parameters
	110	! 'single_street_canyon'
[367]	111	! Added shf* and qsws* to the list of available output data
[226]	112	!
	113	! 222 2009-01-12 16:04:16Z letzel
[217]	114	! +user_check_parameters
[213]	115	! Output of messages replaced by message handling routine.
[206]	116	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	117	! deleted __mpi2 directives
[222]	118	! Check that PALM is called with mrun -K parallel for coupling
[198]	119	!
	120	! 197 2008-09-16 15:29:03Z raasch
[177]	121	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	122	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	123	!
	124	! Strict grid matching along z is not needed for mg-solver.
[153]	125	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	126	! Case of reading data for recycling included in initializing_actions,
[197]	127	! check of turbulent_inflow and calculation of recycling_plane.
	128	! q*2 profile added
[139]	129	!
	130	! 138 2007-11-28 10:03:58Z letzel
[138]	131	! Plant canopy added
[132]	132	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	133	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	134	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	135	!
	136	! 109 2007-08-28 15:26:47Z letzel
[102]	137	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	138	! conditions for temperature and fluxes) in case of coupled runs.
	139	! +profiles for wp and w"e
[104]	140	! Bugfix: Error message concerning output of particle concentration (pc)
	141	! modified
[108]	142	! More checks and more default values for coupled runs
	143	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	144	! cloud_physics = .T.)
	145	! Rayleigh damping for ocean fixed.
[109]	146	! Check and, if necessary, set default value for dt_coupling
[98]	147	!
	148	! 97 2007-06-21 08:23:15Z raasch
[97]	149	! Initial salinity profile is calculated, salinity boundary conditions are
	150	! checked,
[94]	151	! z_max_do1d is checked only in case of ocean = .f.,
[97]	152	! +initial temperature and geostrophic velocity profiles for the ocean version,
	153	! use_pt_reference renamed use_reference
[77]	154	!
[90]	155	! 89 2007-05-25 12:08:31Z raasch
	156	! Check for user-defined profiles
	157	!
[77]	158	! 75 2007-03-22 09:54:05Z raasch
[51]	159	! "by_user" allowed as initializing action, -data_output_ts,
[63]	160	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	161	! and pt_reference are checked, moisture renamed humidity,
[72]	162	! output of precipitation amount/rate and roughnes length + check
[73]	163	! possible negative humidities are avoided in initial profile,
[75]	164	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	165	! revision added to run_description_header
[1]	166	!
[39]	167	! 20 2007-02-26 00:12:32Z raasch
	168	! Temperature and humidity gradients at top are now calculated for nzt+1,
	169	! top_heatflux and respective boundary condition bc_pt_t is checked
	170	!
[3]	171	! RCS Log replace by Id keyword, revision history cleaned up
	172	!
[1]	173	! Revision 1.61 2006/08/04 14:20:25 raasch
	174	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	175	! use_upstream_for_tke, default value for dt_dopts,
	176	! generation of file header moved from routines palm and header to here
	177	!
	178	! Revision 1.1 1997/08/26 06:29:23 raasch
	179	! Initial revision
	180	!
	181	!
	182	! Description:
	183	! ------------
	184	! Check control parameters and deduce further quantities.
	185	!------------------------------------------------------------------------------!
	186
	187	USE arrays_3d
[824]	188	USE cloud_parameters
[1]	189	USE constants
	190	USE control_parameters
[264]	191	USE dvrp_variables
[1]	192	USE grid_variables
	193	USE indices
	194	USE model_1d
	195	USE netcdf_control
	196	USE particle_attributes
	197	USE pegrid
	198	USE profil_parameter
[411]	199	USE subsidence_mod
[1]	200	USE statistics
	201	USE transpose_indices
	202
	203	IMPLICIT NONE
	204
	205	CHARACTER (LEN=1) :: sq
	206	CHARACTER (LEN=6) :: var
	207	CHARACTER (LEN=7) :: unit
	208	CHARACTER (LEN=8) :: date
	209	CHARACTER (LEN=10) :: time
[102]	210	CHARACTER (LEN=40) :: coupling_string
[1]	211	CHARACTER (LEN=100) :: action
	212
[767]	213	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
	214	position, prec
[1]	215	LOGICAL :: found, ldum
[291]	216	REAL :: gradient, maxn, maxp, remote = 0.0, &
	217	simulation_time_since_reference
[1]	218
	219	!
	220	!-- Warning, if host is not set
	221	IF ( host(1:1) == ' ' ) THEN
[213]	222	message_string = '"host" is not set. Please check that environment ' // &
	223	'variable "localhost" & is set before running PALM'
[226]	224	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	225	ENDIF
	226
	227	!
[102]	228	!-- Check the coupling mode
	229	IF ( coupling_mode /= 'uncoupled' .AND. &
	230	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	231	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	232	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	233	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	234	ENDIF
	235
	236	!
[108]	237	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	238	IF ( coupling_mode /= 'uncoupled') THEN
[213]	239
[108]	240	IF ( dt_coupling == 9999999.9 ) THEN
[213]	241	message_string = 'dt_coupling is not set but required for coup' // &
	242	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	243	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	244	ENDIF
[213]	245
[206]	246	#if defined( __parallel )
[807]	247
	248	!
	249	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	250	!-- program.
	251	!-- check_namelist_files will need the following information of the other
	252	!-- model (atmosphere/ocean).
[845]	253	! dt_coupling = remote
	254	! dt_max = remote
	255	! restart_time = remote
	256	! dt_restart= remote
	257	! simulation_time_since_reference = remote
	258	! dx = remote
[807]	259
	260
[809]	261	#if ! defined( __check )
[667]	262	IF ( myid == 0 ) THEN
	263	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	264	ierr )
	265	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	266	status, ierr )
	267	ENDIF
	268	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	269	#endif
[108]	270	IF ( dt_coupling /= remote ) THEN
[213]	271	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	272	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	273	'dt_coupling_remote = ', remote
[226]	274	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	275	ENDIF
[109]	276	IF ( dt_coupling <= 0.0 ) THEN
[809]	277	#if ! defined( __check )
[667]	278	IF ( myid == 0 ) THEN
	279	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	280	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	281	status, ierr )
	282	ENDIF
	283	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	284	#endif
[109]	285	dt_coupling = MAX( dt_max, remote )
[213]	286	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	287	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	288	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	289	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	290	ENDIF
[809]	291	#if ! defined( __check )
[667]	292	IF ( myid == 0 ) THEN
	293	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	294	ierr )
	295	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	296	status, ierr )
	297	ENDIF
	298	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	299	#endif
[108]	300	IF ( restart_time /= remote ) THEN
[213]	301	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	302	'": restart_time = ', restart_time, '& is not equal to ', &
	303	'restart_time_remote = ', remote
[226]	304	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	305	ENDIF
[809]	306	#if ! defined( __check )
[667]	307	IF ( myid == 0 ) THEN
	308	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	309	ierr )
	310	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	311	status, ierr )
	312	ENDIF
	313	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	314	#endif
[108]	315	IF ( dt_restart /= remote ) THEN
[213]	316	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	317	'": dt_restart = ', dt_restart, '& is not equal to ', &
	318	'dt_restart_remote = ', remote
[226]	319	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	320	ENDIF
[213]	321
[291]	322	simulation_time_since_reference = end_time - coupling_start_time
[809]	323	#if ! defined( __check )
[667]	324	IF ( myid == 0 ) THEN
	325	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	326	14, comm_inter, ierr )
	327	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	328	status, ierr )
	329	ENDIF
	330	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	331	#endif
[291]	332	IF ( simulation_time_since_reference /= remote ) THEN
[213]	333	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	334	'": simulation_time_since_reference = ', &
	335	simulation_time_since_reference, '& is not equal to ', &
	336	'simulation_time_since_reference_remote = ', remote
[226]	337	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	338	ENDIF
[213]	339
[809]	340	#if ! defined( __check )
[667]	341	IF ( myid == 0 ) THEN
	342	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	343	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	344	status, ierr )
[108]	345	ENDIF
[667]	346	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	347
[807]	348	#endif
[667]	349	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	350
	351	IF ( dx < remote ) THEN
	352	WRITE( message_string, * ) 'coupling mode "', &
	353	TRIM( coupling_mode ), &
	354	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	355	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	356	ENDIF
	357
	358	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	359	WRITE( message_string, * ) 'coupling mode "', &
	360	TRIM( coupling_mode ), &
	361	'": Domain size in x-direction is not equal in ocean and atmosphere'
	362	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	363	ENDIF
	364
[108]	365	ENDIF
[213]	366
[809]	367	#if ! defined( __check )
[667]	368	IF ( myid == 0) THEN
	369	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	370	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	371	status, ierr )
[108]	372	ENDIF
[667]	373	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	374	#endif
[667]	375	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	376
	377	IF ( dy < remote ) THEN
	378	WRITE( message_string, * ) 'coupling mode "', &
	379	TRIM( coupling_mode ), &
	380	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	381	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	382	ENDIF
	383
	384	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	385	WRITE( message_string, * ) 'coupling mode "', &
	386	TRIM( coupling_mode ), &
	387	'": Domain size in y-direction is not equal in ocean and atmosphere'
	388	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	389	ENDIF
	390
	391	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	392	WRITE( message_string, * ) 'coupling mode "', &
	393	TRIM( coupling_mode ), &
	394	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	395	' atmosphere'
	396	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	397	ENDIF
	398
	399	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	400	WRITE( message_string, * ) 'coupling mode "', &
	401	TRIM( coupling_mode ), &
	402	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	403	' atmosphere'
	404	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	405	ENDIF
	406
[108]	407	ENDIF
[222]	408	#else
	409	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	410	' ''mrun -K parallel'''
[226]	411	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	412	#endif
	413	ENDIF
	414
[809]	415	#if defined( __parallel ) && ! defined ( __check )
[108]	416	!
	417	!-- Exchange via intercommunicator
[667]	418	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	419	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	420	ierr )
[667]	421	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	422	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	423	comm_inter, status, ierr )
[108]	424	ENDIF
[667]	425	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	426
[108]	427	#endif
	428
	429
	430	!
[1]	431	!-- Generate the file header which is used as a header for most of PALM's
	432	!-- output files
	433	CALL DATE_AND_TIME( date, time )
	434	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	435	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	436	IF ( coupling_mode == 'uncoupled' ) THEN
	437	coupling_string = ''
	438	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	439	coupling_string = ' coupled (atmosphere)'
	440	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	441	coupling_string = ' coupled (ocean)'
	442	ENDIF
[1]	443
[102]	444	WRITE ( run_description_header, &
	445	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	446	TRIM( version ), TRIM( revision ), 'run: ', &
	447	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	448	'host: ', TRIM( host ), run_date, run_time
[1]	449
	450	!
[63]	451	!-- Check the general loop optimization method
	452	IF ( loop_optimization == 'default' ) THEN
	453	IF ( host(1:3) == 'nec' ) THEN
	454	loop_optimization = 'vector'
	455	ELSE
	456	loop_optimization = 'cache'
	457	ENDIF
	458	ENDIF
	459	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	460	.AND. loop_optimization /= 'vector' ) THEN
[213]	461	message_string = 'illegal value given for loop_optimization: "' // &
	462	TRIM( loop_optimization ) // '"'
[226]	463	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	464	ENDIF
	465
	466	!
[1]	467	!-- Check topography setting (check for illegal parameter combinations)
	468	IF ( topography /= 'flat' ) THEN
	469	action = ' '
[861]	470	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
[1]	471	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	472	ENDIF
[861]	473	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	474	THEN
[1]	475	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	476	ENDIF
[51]	477	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	478	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	479	ENDIF
[114]	480	IF ( psolver == 'sor' ) THEN
[1]	481	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	482	ENDIF
	483	IF ( sloping_surface ) THEN
	484	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	485	ENDIF
	486	IF ( galilei_transformation ) THEN
	487	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	488	ENDIF
	489	IF ( cloud_physics ) THEN
	490	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	491	ENDIF
	492	IF ( cloud_droplets ) THEN
	493	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	494	ENDIF
	495	IF ( .NOT. prandtl_layer ) THEN
	496	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	497	ENDIF
	498	IF ( action /= ' ' ) THEN
[213]	499	message_string = 'a non-flat topography does not allow ' // &
	500	TRIM( action )
[226]	501	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	502	ENDIF
[256]	503	!
	504	!-- In case of non-flat topography, check whether the convention how to
	505	!-- define the topography grid has been set correctly, or whether the default
	506	!-- is applicable. If this is not possible, abort.
	507	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	508	IF ( TRIM( topography ) /= 'single_building' .AND. &
	509	TRIM( topography ) /= 'single_street_canyon' .AND. &
	510	TRIM( topography ) /= 'read_from_file' ) THEN
	511	!-- The default value is not applicable here, because it is only valid
	512	!-- for the two standard cases 'single_building' and 'read_from_file'
	513	!-- defined in init_grid.
	514	WRITE( message_string, * ) &
	515	'The value for "topography_grid_convention" ', &
	516	'is not set. Its default value is & only valid for ', &
	517	'"topography" = ''single_building'', ', &
	518	'''single_street_canyon'' & or ''read_from_file''.', &
	519	' & Choose ''cell_edge'' or ''cell_center''.'
	520	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	521	ELSE
	522	!-- The default value is applicable here.
	523	!-- Set convention according to topography.
	524	IF ( TRIM( topography ) == 'single_building' .OR. &
	525	TRIM( topography ) == 'single_street_canyon' ) THEN
	526	topography_grid_convention = 'cell_edge'
	527	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	528	topography_grid_convention = 'cell_center'
	529	ENDIF
	530	ENDIF
	531	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	532	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	533	WRITE( message_string, * ) &
	534	'The value for "topography_grid_convention" is ', &
	535	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	536	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	537	ENDIF
	538
[1]	539	ENDIF
[94]	540
[1]	541	!
[94]	542	!-- Check ocean setting
	543	IF ( ocean ) THEN
[332]	544
[94]	545	action = ' '
	546	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	547	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	548	ENDIF
[97]	549	IF ( momentum_advec == 'ups-scheme' ) THEN
	550	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	551	ENDIF
[94]	552	IF ( action /= ' ' ) THEN
[213]	553	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	554	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	555	ENDIF
	556
[332]	557	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	558	TRIM( coupling_char ) == '_O' ) THEN
[343]	559
[94]	560	!
[332]	561	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	562	!-- ocean run (this setting is done via mrun-option -y)
[343]	563
[291]	564	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	565	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	566	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	567
[291]	568	ENDIF
	569
	570	!
[1]	571	!-- Check whether there are any illegal values
	572	!-- Pressure solver:
	573	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	574	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	575	message_string = 'unknown solver for perturbation pressure: psolver' // &
	576	' = "' // TRIM( psolver ) // '"'
[226]	577	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	578	ENDIF
	579
	580	#if defined( __parallel )
	581	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	582	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	583	'for a 1d domain-decomposition along x & please do' // &
	584	' not set npey/=1 in the parameter file'
[226]	585	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	586	ENDIF
[181]	587	IF ( psolver == 'poisfft_hybrid' .AND. &
	588	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	589	psolver == 'multigrid' .AND. &
	590	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	591	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	592	'work for subdomains with unequal size & please ' // &
	593	'set grid_matching = ''strict'' in the parameter file'
[226]	594	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	595	ENDIF
	596	#else
	597	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	598	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	599	' for a parallel environment'
[226]	600	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	601	ENDIF
	602	#endif
	603
	604	IF ( psolver == 'multigrid' ) THEN
	605	IF ( cycle_mg == 'w' ) THEN
	606	gamma_mg = 2
	607	ELSEIF ( cycle_mg == 'v' ) THEN
	608	gamma_mg = 1
	609	ELSE
[213]	610	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	611	TRIM( cycle_mg ) // '"'
[226]	612	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	613	ENDIF
	614	ENDIF
	615
	616	IF ( fft_method /= 'singleton-algorithm' .AND. &
	617	fft_method /= 'temperton-algorithm' .AND. &
	618	fft_method /= 'system-specific' ) THEN
[213]	619	message_string = 'unknown fft-algorithm: fft_method = "' // &
	620	TRIM( fft_method ) // '"'
[226]	621	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	622	ENDIF
[667]	623
	624	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	625	.NOT. call_psolver_at_all_substeps ) THEN
[667]	626	message_string = 'psolver must be called at each RK3 substep when "'//&
	627	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	628	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	629	END IF
[1]	630	!
	631	!-- Advection schemes:
[673]	632	!
	633	!-- Set the LOGICALS to enhance the performance.
	634	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	635	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	636
[667]	637	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
	638	momentum_advec /= 'ups-scheme' ) THEN
[214]	639	message_string = 'unknown advection scheme: momentum_advec = "' // &
	640	TRIM( momentum_advec ) // '"'
[226]	641	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	642	ENDIF
[667]	643	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	644	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
	645	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
	646	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
	647	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
	648	message_string = 'momentum_advec or scalar_advec = "' &
	649	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	650	TRIM( timestep_scheme ) // '"'
[226]	651	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	652	ENDIF
[667]	653	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
	654	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
[214]	655	message_string = 'unknown advection scheme: scalar_advec = "' // &
	656	TRIM( scalar_advec ) // '"'
[226]	657	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	658	ENDIF
	659
	660	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	661	use_upstream_for_tke = .TRUE.
[214]	662	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	663	'use_sgs_for_particles = .TRUE.'
[226]	664	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	665	ENDIF
	666
	667	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	668	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	669	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	670	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	671	ENDIF
	672
[824]	673	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	674	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	675	'curvature_solution_effects = .TRUE.'
	676	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	677	ENDIF
	678
[1]	679	!
	680	!-- Timestep schemes:
	681	SELECT CASE ( TRIM( timestep_scheme ) )
	682
	683	CASE ( 'euler' )
	684	intermediate_timestep_count_max = 1
	685	asselin_filter_factor = 0.0
	686
	687	CASE ( 'leapfrog', 'leapfrog+euler' )
	688	intermediate_timestep_count_max = 1
	689
	690	CASE ( 'runge-kutta-2' )
	691	intermediate_timestep_count_max = 2
	692	asselin_filter_factor = 0.0
	693
	694	CASE ( 'runge-kutta-3' )
	695	intermediate_timestep_count_max = 3
	696	asselin_filter_factor = 0.0
	697
	698	CASE DEFAULT
[214]	699	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	700	TRIM( timestep_scheme ) // '"'
[226]	701	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	702
	703	END SELECT
	704
[63]	705	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	706	THEN
[214]	707	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	708	'" & does not work with timestep_scheme "' // &
	709	TRIM( timestep_scheme ) // '"'
[226]	710	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	711	ENDIF
	712
[667]	713	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	714	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	715	message_string = 'momentum advection scheme "' // &
	716	TRIM( momentum_advec ) // '" & does not work with ' // &
	717	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	718	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	719	ENDIF
	720
[825]	721	!
	722	!-- Collision kernels:
	723	SELECT CASE ( TRIM( collision_kernel ) )
	724
[828]	725	CASE ( 'hall', 'hall_fast' )
[825]	726	hall_kernel = .TRUE.
	727
	728	CASE ( 'palm' )
	729	palm_kernel = .TRUE.
	730
[828]	731	CASE ( 'wang', 'wang_fast' )
[825]	732	wang_kernel = .TRUE.
	733
	734	CASE ( 'none' )
	735
	736
	737	CASE DEFAULT
	738	message_string = 'unknown collision kernel: collision_kernel = "' // &
	739	TRIM( collision_kernel ) // '"'
	740	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	741
	742	END SELECT
[828]	743	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	744
[147]	745	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	746	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	747	!
[214]	748	!-- No restart run: several initialising actions are possible
[1]	749	action = initializing_actions
	750	DO WHILE ( TRIM( action ) /= '' )
	751	position = INDEX( action, ' ' )
	752	SELECT CASE ( action(1:position-1) )
	753
	754	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	755	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	756	action = action(position+1:)
	757
	758	CASE DEFAULT
[214]	759	message_string = 'initializing_action = "' // &
	760	TRIM( action ) // '" unkown or not allowed'
[226]	761	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	762
	763	END SELECT
	764	ENDDO
	765	ENDIF
[214]	766
[680]	767	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	768	conserve_volume_flow ) THEN
	769	message_string = 'initializing_actions = "initialize_vortex"' // &
	770	' ist not allowed with conserve_volume_flow = .T.'
	771	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	772	ENDIF
	773
	774
[1]	775	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	776	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	777	message_string = 'initializing_actions = "set_constant_profiles"' // &
	778	' and "set_1d-model_profiles" are not allowed ' // &
	779	'simultaneously'
[226]	780	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	781	ENDIF
[214]	782
[46]	783	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	784	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	785	message_string = 'initializing_actions = "set_constant_profiles"' // &
	786	' and "by_user" are not allowed simultaneously'
[226]	787	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	788	ENDIF
[214]	789
[46]	790	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	791	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	792	message_string = 'initializing_actions = "by_user" and ' // &
	793	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	794	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	795	ENDIF
[1]	796
[75]	797	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	798	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	799	'not allowed with humidity = ', humidity
[226]	800	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	801	ENDIF
	802
[72]	803	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	804	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	805	'not allowed with cloud_physics = ', cloud_physics
[226]	806	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	807	ENDIF
	808
[75]	809	IF ( humidity .AND. sloping_surface ) THEN
[214]	810	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	811	'are not allowed simultaneously'
[226]	812	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	813	ENDIF
	814
[75]	815	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	816	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	817	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	818	ENDIF
	819
[75]	820	IF ( passive_scalar .AND. humidity ) THEN
[214]	821	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	822	'is not allowed simultaneously'
[226]	823	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	824	ENDIF
	825
	826	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	827	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	828	' = .TRUE.'
[226]	829	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	830	ENDIF
	831
	832	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	833	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	834	'" found for parameter grid_matching'
[226]	835	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	836	ENDIF
	837
[138]	838	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	839	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	840	'coefficient & given value is drag_coefficient = 0.0'
[226]	841	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	842	ENDIF
	843
[1]	844	!
	845	!-- In case of no model continuation run, check initialising parameters and
	846	!-- deduce further quantities
	847	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	848
	849	!
[767]	850	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	851	pt_init = pt_surface
[94]	852	IF ( humidity ) q_init = q_surface
	853	IF ( ocean ) sa_init = sa_surface
	854	IF ( passive_scalar ) q_init = s_surface
[138]	855	IF ( plant_canopy ) lad = 0.0
[1]	856
	857	!
	858	!--
	859	!-- If required, compute initial profile of the geostrophic wind
	860	!-- (component ug)
	861	i = 1
	862	gradient = 0.0
[97]	863
	864	IF ( .NOT. ocean ) THEN
	865
	866	ug_vertical_gradient_level_ind(1) = 0
	867	ug(0) = ug_surface
	868	DO k = 1, nzt+1
[177]	869	IF ( i < 11 ) THEN
	870	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	871	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	872	gradient = ug_vertical_gradient(i) / 100.0
	873	ug_vertical_gradient_level_ind(i) = k - 1
	874	i = i + 1
[1]	875	ENDIF
[177]	876	ENDIF
[97]	877	IF ( gradient /= 0.0 ) THEN
	878	IF ( k /= 1 ) THEN
	879	ug(k) = ug(k-1) + dzu(k) * gradient
	880	ELSE
	881	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	882	ENDIF
[1]	883	ELSE
[97]	884	ug(k) = ug(k-1)
[1]	885	ENDIF
[97]	886	ENDDO
[1]	887
[97]	888	ELSE
	889
	890	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	891	ug(nzt+1) = ug_surface
[667]	892	DO k = nzt, nzb, -1
[177]	893	IF ( i < 11 ) THEN
	894	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	895	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	896	gradient = ug_vertical_gradient(i) / 100.0
	897	ug_vertical_gradient_level_ind(i) = k + 1
	898	i = i + 1
[97]	899	ENDIF
	900	ENDIF
	901	IF ( gradient /= 0.0 ) THEN
	902	IF ( k /= nzt ) THEN
	903	ug(k) = ug(k+1) - dzu(k+1) * gradient
	904	ELSE
	905	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	906	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	907	ENDIF
	908	ELSE
	909	ug(k) = ug(k+1)
	910	ENDIF
	911	ENDDO
	912
	913	ENDIF
	914
[1]	915	!
[767]	916	!-- In case of no given gradients for ug, choose a zero gradient
[97]	917	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	918	ug_vertical_gradient_level(1) = 0.0
	919	ENDIF
	920
	921	!
	922	!--
	923	!-- If required, compute initial profile of the geostrophic wind
	924	!-- (component vg)
	925	i = 1
	926	gradient = 0.0
[97]	927
	928	IF ( .NOT. ocean ) THEN
	929
	930	vg_vertical_gradient_level_ind(1) = 0
	931	vg(0) = vg_surface
	932	DO k = 1, nzt+1
[177]	933	IF ( i < 11 ) THEN
	934	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	935	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	936	gradient = vg_vertical_gradient(i) / 100.0
	937	vg_vertical_gradient_level_ind(i) = k - 1
	938	i = i + 1
[1]	939	ENDIF
	940	ENDIF
[97]	941	IF ( gradient /= 0.0 ) THEN
	942	IF ( k /= 1 ) THEN
	943	vg(k) = vg(k-1) + dzu(k) * gradient
	944	ELSE
	945	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	946	ENDIF
[1]	947	ELSE
[97]	948	vg(k) = vg(k-1)
[1]	949	ENDIF
[97]	950	ENDDO
[1]	951
[97]	952	ELSE
	953
[121]	954	vg_vertical_gradient_level_ind(1) = nzt+1
	955	vg(nzt+1) = vg_surface
[667]	956	DO k = nzt, nzb, -1
[177]	957	IF ( i < 11 ) THEN
	958	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	959	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	960	gradient = vg_vertical_gradient(i) / 100.0
	961	vg_vertical_gradient_level_ind(i) = k + 1
	962	i = i + 1
[97]	963	ENDIF
	964	ENDIF
	965	IF ( gradient /= 0.0 ) THEN
	966	IF ( k /= nzt ) THEN
	967	vg(k) = vg(k+1) - dzu(k+1) * gradient
	968	ELSE
	969	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	970	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	971	ENDIF
	972	ELSE
	973	vg(k) = vg(k+1)
	974	ENDIF
	975	ENDDO
	976
	977	ENDIF
	978
[1]	979	!
[767]	980	!-- In case of no given gradients for vg, choose a zero gradient
[97]	981	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	982	vg_vertical_gradient_level(1) = 0.0
	983	ENDIF
	984
	985	!
[767]	986	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	987	!-- interpolate them from wind profile data (if given)
	988	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	989
	990	u_init = ug
	991	v_init = vg
	992
	993	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	994
	995	IF ( uv_heights(1) /= 0.0 ) THEN
	996	message_string = 'uv_heights(1) must be 0.0'
	997	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	998	ENDIF
	999
	1000	use_prescribed_profile_data = .TRUE.
	1001
	1002	kk = 1
	1003	u_init(0) = 0.0
	1004	v_init(0) = 0.0
	1005
	1006	DO k = 1, nz+1
	1007
	1008	IF ( kk < 100 ) THEN
	1009	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	1010	kk = kk + 1
	1011	IF ( kk == 100 ) EXIT
	1012	ENDDO
	1013	ENDIF
	1014
[774]	1015	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1016	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1017	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1018	( u_profile(kk+1) - u_profile(kk) )
	1019	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1020	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1021	( v_profile(kk+1) - v_profile(kk) )
	1022	ELSE
	1023	u_init(k) = u_profile(kk)
	1024	v_init(k) = v_profile(kk)
	1025	ENDIF
	1026
	1027	ENDDO
	1028
	1029	ELSE
	1030
	1031	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1032	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1033
	1034	ENDIF
	1035
	1036	!
[94]	1037	!-- Compute initial temperature profile using the given temperature gradients
[1]	1038	i = 1
	1039	gradient = 0.0
[94]	1040
	1041	IF ( .NOT. ocean ) THEN
	1042
	1043	pt_vertical_gradient_level_ind(1) = 0
	1044	DO k = 1, nzt+1
[177]	1045	IF ( i < 11 ) THEN
	1046	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1047	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1048	gradient = pt_vertical_gradient(i) / 100.0
	1049	pt_vertical_gradient_level_ind(i) = k - 1
	1050	i = i + 1
[1]	1051	ENDIF
	1052	ENDIF
[94]	1053	IF ( gradient /= 0.0 ) THEN
	1054	IF ( k /= 1 ) THEN
	1055	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1056	ELSE
	1057	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	1058	ENDIF
[1]	1059	ELSE
[94]	1060	pt_init(k) = pt_init(k-1)
[1]	1061	ENDIF
[94]	1062	ENDDO
[1]	1063
[94]	1064	ELSE
	1065
	1066	pt_vertical_gradient_level_ind(1) = nzt+1
	1067	DO k = nzt, 0, -1
[177]	1068	IF ( i < 11 ) THEN
	1069	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1070	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1071	gradient = pt_vertical_gradient(i) / 100.0
	1072	pt_vertical_gradient_level_ind(i) = k + 1
	1073	i = i + 1
[94]	1074	ENDIF
	1075	ENDIF
	1076	IF ( gradient /= 0.0 ) THEN
	1077	IF ( k /= nzt ) THEN
	1078	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1079	ELSE
	1080	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1081	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1082	ENDIF
	1083	ELSE
	1084	pt_init(k) = pt_init(k+1)
	1085	ENDIF
	1086	ENDDO
	1087
	1088	ENDIF
	1089
[1]	1090	!
	1091	!-- In case of no given temperature gradients, choose gradient of neutral
	1092	!-- stratification
[94]	1093	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1094	pt_vertical_gradient_level(1) = 0.0
	1095	ENDIF
	1096
	1097	!
[94]	1098	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1099	!-- boundary condition
[19]	1100	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1101
	1102	!
	1103	!-- If required, compute initial humidity or scalar profile using the given
	1104	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1105	!-- values of the scalar parameters on humidity parameters
	1106	IF ( passive_scalar ) THEN
	1107	bc_q_b = bc_s_b
	1108	bc_q_t = bc_s_t
	1109	q_surface = s_surface
	1110	q_surface_initial_change = s_surface_initial_change
	1111	q_vertical_gradient = s_vertical_gradient
	1112	q_vertical_gradient_level = s_vertical_gradient_level
	1113	surface_waterflux = surface_scalarflux
[407]	1114	wall_humidityflux = wall_scalarflux
[1]	1115	ENDIF
	1116
[75]	1117	IF ( humidity .OR. passive_scalar ) THEN
[1]	1118
	1119	i = 1
	1120	gradient = 0.0
	1121	q_vertical_gradient_level_ind(1) = 0
	1122	DO k = 1, nzt+1
[177]	1123	IF ( i < 11 ) THEN
	1124	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1125	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1126	gradient = q_vertical_gradient(i) / 100.0
	1127	q_vertical_gradient_level_ind(i) = k - 1
	1128	i = i + 1
[1]	1129	ENDIF
	1130	ENDIF
	1131	IF ( gradient /= 0.0 ) THEN
	1132	IF ( k /= 1 ) THEN
	1133	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1134	ELSE
	1135	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1136	ENDIF
	1137	ELSE
	1138	q_init(k) = q_init(k-1)
	1139	ENDIF
[72]	1140	!
	1141	!-- Avoid negative humidities
	1142	IF ( q_init(k) < 0.0 ) THEN
	1143	q_init(k) = 0.0
	1144	ENDIF
[1]	1145	ENDDO
	1146
	1147	!
	1148	!-- In case of no given humidity gradients, choose zero gradient
	1149	!-- conditions
	1150	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1151	q_vertical_gradient_level(1) = 0.0
	1152	ENDIF
	1153
	1154	!
	1155	!-- Store humidity gradient at the top boundary for possile Neumann
	1156	!-- boundary condition
[19]	1157	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1158
	1159	ENDIF
	1160
[94]	1161	!
	1162	!-- If required, compute initial salinity profile using the given salinity
	1163	!-- gradients
	1164	IF ( ocean ) THEN
	1165
	1166	i = 1
	1167	gradient = 0.0
	1168
	1169	sa_vertical_gradient_level_ind(1) = nzt+1
	1170	DO k = nzt, 0, -1
[177]	1171	IF ( i < 11 ) THEN
	1172	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1173	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1174	gradient = sa_vertical_gradient(i) / 100.0
	1175	sa_vertical_gradient_level_ind(i) = k + 1
	1176	i = i + 1
[94]	1177	ENDIF
	1178	ENDIF
	1179	IF ( gradient /= 0.0 ) THEN
	1180	IF ( k /= nzt ) THEN
	1181	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1182	ELSE
	1183	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1184	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1185	ENDIF
	1186	ELSE
	1187	sa_init(k) = sa_init(k+1)
	1188	ENDIF
	1189	ENDDO
	1190
	1191	ENDIF
	1192
[138]	1193	!
[388]	1194	!-- If required compute the profile of leaf area density used in the plant
	1195	!-- canopy model
[138]	1196	IF ( plant_canopy ) THEN
	1197
	1198	i = 1
	1199	gradient = 0.0
[1]	1200
[138]	1201	IF ( .NOT. ocean ) THEN
[153]	1202
	1203	lad(0) = lad_surface
[138]	1204
	1205	lad_vertical_gradient_level_ind(1) = 0
	1206	DO k = 1, pch_index
[177]	1207	IF ( i < 11 ) THEN
	1208	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1209	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1210	gradient = lad_vertical_gradient(i)
	1211	lad_vertical_gradient_level_ind(i) = k - 1
	1212	i = i + 1
[138]	1213	ENDIF
	1214	ENDIF
	1215	IF ( gradient /= 0.0 ) THEN
	1216	IF ( k /= 1 ) THEN
	1217	lad(k) = lad(k-1) + dzu(k) * gradient
	1218	ELSE
	1219	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1220	ENDIF
	1221	ELSE
	1222	lad(k) = lad(k-1)
	1223	ENDIF
	1224	ENDDO
	1225
	1226	ENDIF
	1227
[1]	1228	!
[388]	1229	!-- In case of no given leaf area density gradients, choose a vanishing
	1230	!-- gradient
[138]	1231	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1232	lad_vertical_gradient_level(1) = 0.0
	1233	ENDIF
	1234
	1235	ENDIF
	1236
	1237	ENDIF
[411]	1238
	1239	!
	1240	!-- Initialize large scale subsidence if required
[580]	1241	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1242	large_scale_subsidence = .TRUE.
	1243	CALL init_w_subsidence
	1244	END IF
	1245
[138]	1246
[667]	1247
[138]	1248	!
[1]	1249	!-- Compute Coriolis parameter
	1250	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1251	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1252
	1253	!
[97]	1254	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1255	!-- set the reference temperature equal to the surface temperature.
	1256	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1257
	1258	!
[97]	1259	!-- Reference value has to be used in buoyancy terms
	1260	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1261
	1262	!
	1263	!-- Sign of buoyancy/stability terms
	1264	IF ( ocean ) atmos_ocean_sign = -1.0
	1265
	1266	!
[108]	1267	!-- Ocean version must use flux boundary conditions at the top
	1268	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1269	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1270	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1271	ENDIF
[97]	1272
	1273	!
[1]	1274	!-- In case of a given slope, compute the relevant quantities
	1275	IF ( alpha_surface /= 0.0 ) THEN
	1276	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1277	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1278	' ) must be < 90.0'
[226]	1279	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1280	ENDIF
	1281	sloping_surface = .TRUE.
	1282	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1283	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1284	ENDIF
	1285
	1286	!
	1287	!-- Check time step and cfl_factor
	1288	IF ( dt /= -1.0 ) THEN
	1289	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1290	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1291	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1292	ENDIF
	1293	dt_3d = dt
	1294	dt_fixed = .TRUE.
	1295	ENDIF
	1296
	1297	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1298	IF ( cfl_factor == -1.0 ) THEN
	1299	IF ( momentum_advec == 'ups-scheme' .OR. &
	1300	scalar_advec == 'ups-scheme' ) THEN
	1301	cfl_factor = 0.8
	1302	ELSE
	1303	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1304	cfl_factor = 0.8
	1305	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1306	cfl_factor = 0.9
	1307	ELSE
	1308	cfl_factor = 0.1
	1309	ENDIF
	1310	ENDIF
	1311	ELSE
[215]	1312	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1313	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1314	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1315	ENDIF
	1316	ENDIF
	1317
	1318	!
	1319	!-- Store simulated time at begin
	1320	simulated_time_at_begin = simulated_time
	1321
	1322	!
[291]	1323	!-- Store reference time for coupled runs and change the coupling flag,
	1324	!-- if ...
	1325	IF ( simulated_time == 0.0 ) THEN
	1326	IF ( coupling_start_time == 0.0 ) THEN
	1327	time_since_reference_point = 0.0
	1328	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1329	run_coupled = .FALSE.
	1330	ENDIF
	1331	ENDIF
	1332
	1333	!
[1]	1334	!-- Set wind speed in the Galilei-transformed system
	1335	IF ( galilei_transformation ) THEN
	1336	IF ( use_ug_for_galilei_tr .AND. &
	1337	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1338	vg_vertical_gradient_level(1) == 0.0 ) THEN
[866]	1339	u_gtrans = ug_surface * 0.6
	1340	v_gtrans = vg_surface * 0.6
[1]	1341	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1342	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1343	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1344	' with galilei transformation'
[226]	1345	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1346	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1347	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1348	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1349	' with galilei transformation'
[226]	1350	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1351	ELSE
[215]	1352	message_string = 'variable translation speed used for galilei-' // &
	1353	'transformation, which may cause & instabilities in stably ' // &
	1354	'stratified regions'
[226]	1355	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1356	ENDIF
	1357	ENDIF
	1358
	1359	!
	1360	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1361	!-- fluxes have to be used in the diffusion-terms
	1362	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1363
	1364	!
	1365	!-- Check boundary conditions and set internal variables:
	1366	!-- Lateral boundary conditions
[73]	1367	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1368	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1369	message_string = 'unknown boundary condition: bc_lr = "' // &
	1370	TRIM( bc_lr ) // '"'
[226]	1371	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1372	ENDIF
[73]	1373	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1374	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1375	message_string = 'unknown boundary condition: bc_ns = "' // &
	1376	TRIM( bc_ns ) // '"'
[226]	1377	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1378	ENDIF
	1379
	1380	!
[366]	1381	!-- Internal variables used for speed optimization in if clauses
[707]	1382	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1383	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1384	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1385	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1386	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1387	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1388
	1389	!
[1]	1390	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1391	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1392	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1393	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1394	IF ( psolver /= 'multigrid' ) THEN
[215]	1395	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1396	'psolver = "' // TRIM( psolver ) // '"'
[226]	1397	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1398	ENDIF
[667]	1399	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1400	momentum_advec /= 'ws-scheme') THEN
[215]	1401	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1402	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1403	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1404	ENDIF
[667]	1405	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1406	scalar_advec /= 'ws-scheme' ) THEN
[215]	1407	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1408	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1409	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1410	ENDIF
	1411	IF ( galilei_transformation ) THEN
[215]	1412	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1413	'galilei_transformation = .T.'
[226]	1414	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1415	ENDIF
	1416	ENDIF
	1417
	1418	!
	1419	!-- Bottom boundary condition for the turbulent Kinetic energy
	1420	IF ( bc_e_b == 'neumann' ) THEN
	1421	ibc_e_b = 1
	1422	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1423	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1424	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1425	ENDIF
	1426	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1427	ibc_e_b = 2
	1428	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1429	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1430	TRIM( bc_e_b ) // '"'
[226]	1431	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1432	ENDIF
	1433	IF ( .NOT. prandtl_layer ) THEN
	1434	bc_e_b = 'neumann'
	1435	ibc_e_b = 1
[215]	1436	message_string = 'boundary condition bc_e_b changed to "' // &
	1437	TRIM( bc_e_b ) // '"'
[226]	1438	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1439	ENDIF
	1440	ELSE
[215]	1441	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1442	TRIM( bc_e_b ) // '"'
[226]	1443	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1444	ENDIF
	1445
	1446	!
	1447	!-- Boundary conditions for perturbation pressure
	1448	IF ( bc_p_b == 'dirichlet' ) THEN
	1449	ibc_p_b = 0
	1450	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1451	ibc_p_b = 1
	1452	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1453	ibc_p_b = 2
	1454	ELSE
[215]	1455	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1456	TRIM( bc_p_b ) // '"'
[226]	1457	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1458	ENDIF
	1459	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1460	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1461	'" not allowed with prandtl_layer = .FALSE.'
[226]	1462	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1463	ENDIF
	1464	IF ( bc_p_t == 'dirichlet' ) THEN
	1465	ibc_p_t = 0
	1466	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1467	ibc_p_t = 1
	1468	ELSE
[215]	1469	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1470	TRIM( bc_p_t ) // '"'
[226]	1471	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1472	ENDIF
	1473
	1474	!
	1475	!-- Boundary conditions for potential temperature
[102]	1476	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1477	ibc_pt_b = 2
[1]	1478	ELSE
[102]	1479	IF ( bc_pt_b == 'dirichlet' ) THEN
	1480	ibc_pt_b = 0
	1481	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1482	ibc_pt_b = 1
	1483	ELSE
[215]	1484	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1485	TRIM( bc_pt_b ) // '"'
[226]	1486	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1487	ENDIF
	1488	ENDIF
[102]	1489
[1]	1490	IF ( bc_pt_t == 'dirichlet' ) THEN
	1491	ibc_pt_t = 0
	1492	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1493	ibc_pt_t = 1
[19]	1494	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1495	ibc_pt_t = 2
[1]	1496	ELSE
[215]	1497	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1498	TRIM( bc_pt_t ) // '"'
[226]	1499	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1500	ENDIF
	1501
[20]	1502	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1503	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1504	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1505	top_momentumflux_v /= 9999999.9 ) THEN
	1506	constant_top_momentumflux = .TRUE.
	1507	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1508	top_momentumflux_v == 9999999.9 ) ) THEN
	1509	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1510	'must be set'
[226]	1511	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1512	ENDIF
[1]	1513
	1514	!
	1515	!-- A given surface temperature implies Dirichlet boundary condition for
	1516	!-- temperature. In this case specification of a constant heat flux is
	1517	!-- forbidden.
	1518	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1519	surface_heatflux /= 0.0 ) THEN
[215]	1520	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1521	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1522	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1523	ENDIF
	1524	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1525	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1526	'wed with pt_surface_initial_change (/=0) = ', &
	1527	pt_surface_initial_change
[226]	1528	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1529	ENDIF
	1530
	1531	!
[19]	1532	!-- A given temperature at the top implies Dirichlet boundary condition for
	1533	!-- temperature. In this case specification of a constant heat flux is
	1534	!-- forbidden.
	1535	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1536	top_heatflux /= 0.0 ) THEN
[215]	1537	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1538	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1539	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1540	ENDIF
	1541
	1542	!
[95]	1543	!-- Boundary conditions for salinity
	1544	IF ( ocean ) THEN
	1545	IF ( bc_sa_t == 'dirichlet' ) THEN
	1546	ibc_sa_t = 0
	1547	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1548	ibc_sa_t = 1
	1549	ELSE
[215]	1550	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1551	TRIM( bc_sa_t ) // '"'
[226]	1552	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1553	ENDIF
	1554
	1555	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1556	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1557	message_string = 'boundary condition: bc_sa_t = "' // &
	1558	TRIM( bc_sa_t ) // '" requires to set ' // &
	1559	'top_salinityflux'
[226]	1560	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1561	ENDIF
[95]	1562
	1563	!
	1564	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1565	!-- salinity. In this case specification of a constant salinity flux is
	1566	!-- forbidden.
	1567	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1568	top_salinityflux /= 0.0 ) THEN
[215]	1569	message_string = 'boundary condition: bc_sa_t = "' // &
	1570	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1571	'constant_top_salinityflux = .TRUE.'
[226]	1572	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1573	ENDIF
	1574
	1575	ENDIF
	1576
	1577	!
[75]	1578	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1579	!-- water content / scalar
[75]	1580	IF ( humidity .OR. passive_scalar ) THEN
	1581	IF ( humidity ) THEN
[1]	1582	sq = 'q'
	1583	ELSE
	1584	sq = 's'
	1585	ENDIF
	1586	IF ( bc_q_b == 'dirichlet' ) THEN
	1587	ibc_q_b = 0
	1588	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1589	ibc_q_b = 1
	1590	ELSE
[215]	1591	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1592	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1593	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1594	ENDIF
	1595	IF ( bc_q_t == 'dirichlet' ) THEN
	1596	ibc_q_t = 0
	1597	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1598	ibc_q_t = 1
	1599	ELSE
[215]	1600	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1601	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1602	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1603	ENDIF
	1604
[600]	1605	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1606
	1607	!
	1608	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1609	!-- humidity. In this case specification of a constant water flux is
[1]	1610	!-- forbidden.
	1611	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1612	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1613	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1614	'th prescribed surface flux'
[226]	1615	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1616	ENDIF
	1617	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1618	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1619	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1620	q_surface_initial_change
[226]	1621	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1622	ENDIF
	1623
	1624	ENDIF
	1625
	1626	!
	1627	!-- Boundary conditions for horizontal components of wind speed
	1628	IF ( bc_uv_b == 'dirichlet' ) THEN
	1629	ibc_uv_b = 0
	1630	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1631	ibc_uv_b = 1
	1632	IF ( prandtl_layer ) THEN
[215]	1633	message_string = 'boundary condition: bc_uv_b = "' // &
	1634	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1635	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1636	ENDIF
	1637	ELSE
[215]	1638	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1639	TRIM( bc_uv_b ) // '"'
[226]	1640	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1641	ENDIF
[667]	1642	!
	1643	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1644	!-- assigned with the u and v values of the ocean surface
	1645	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1646	ibc_uv_b = 2
	1647	ENDIF
[215]	1648
[108]	1649	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1650	bc_uv_t = 'neumann'
[1]	1651	ibc_uv_t = 1
	1652	ELSE
[132]	1653	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1654	ibc_uv_t = 0
[767]	1655	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1656	!
	1657	!-- Velocities for the initial u,v-profiles are set zero at the top
	1658	!-- in case of dirichlet_0 conditions
	1659	u_init(nzt+1) = 0.0
	1660	v_init(nzt+1) = 0.0
	1661	ENDIF
[108]	1662	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1663	ibc_uv_t = 1
	1664	ELSE
[215]	1665	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1666	TRIM( bc_uv_t ) // '"'
[226]	1667	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1668	ENDIF
	1669	ENDIF
	1670
	1671	!
	1672	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1673	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1674	IF ( momentum_advec == 'ups-scheme' ) THEN
	1675	rayleigh_damping_factor = 0.01
	1676	ELSE
	1677	rayleigh_damping_factor = 0.0
	1678	ENDIF
	1679	ELSE
	1680	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1681	THEN
[215]	1682	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1683	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1684	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1685	ENDIF
	1686	ENDIF
	1687
	1688	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1689	IF ( .NOT. ocean ) THEN
	1690	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1691	ELSE
	1692	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1693	ENDIF
[1]	1694	ELSE
[108]	1695	IF ( .NOT. ocean ) THEN
	1696	IF ( rayleigh_damping_height < 0.0 .OR. &
	1697	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1698	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1699	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1700	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1701	ENDIF
[108]	1702	ELSE
	1703	IF ( rayleigh_damping_height > 0.0 .OR. &
	1704	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1705	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1706	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1707	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1708	ENDIF
[1]	1709	ENDIF
	1710	ENDIF
	1711
	1712	!
	1713	!-- Check limiters for Upstream-Spline scheme
	1714	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1715	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1716	overshoot_limit_e < 0.0 ) THEN
[215]	1717	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1718	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1719	ENDIF
	1720	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1721	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1722	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1723	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1724	ENDIF
	1725
	1726	!
	1727	!-- Check number of chosen statistic regions. More than 10 regions are not
	1728	!-- allowed, because so far no more than 10 corresponding output files can
	1729	!-- be opened (cf. check_open)
	1730	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1731	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1732	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1733	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1734	ENDIF
	1735	IF ( normalizing_region > statistic_regions .OR. &
	1736	normalizing_region < 0) THEN
[215]	1737	WRITE ( message_string, * ) 'normalizing_region = ', &
	1738	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1739	' (value of statistic_regions)'
[226]	1740	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1741	ENDIF
	1742
	1743	!
[116]	1744	!-- Check the interval for sorting particles.
	1745	!-- Using particles as cloud droplets requires sorting after each timestep.
	1746	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1747	dt_sort_particles = 0.0
[215]	1748	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1749	'_droplets = .TRUE.'
[226]	1750	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1751	ENDIF
	1752
	1753	!
[1]	1754	!-- Set the default intervals for data output, if necessary
	1755	!-- NOTE: dt_dosp has already been set in package_parin
	1756	IF ( dt_data_output /= 9999999.9 ) THEN
	1757	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1758	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1759	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1760	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1761	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1762	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1763	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1764	DO mid = 1, max_masks
[410]	1765	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1766	ENDDO
[1]	1767	ENDIF
	1768
	1769	!
	1770	!-- Set the default skip time intervals for data output, if necessary
	1771	IF ( skip_time_dopr == 9999999.9 ) &
	1772	skip_time_dopr = skip_time_data_output
	1773	IF ( skip_time_dosp == 9999999.9 ) &
	1774	skip_time_dosp = skip_time_data_output
	1775	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1776	skip_time_do2d_xy = skip_time_data_output
	1777	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1778	skip_time_do2d_xz = skip_time_data_output
	1779	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1780	skip_time_do2d_yz = skip_time_data_output
	1781	IF ( skip_time_do3d == 9999999.9 ) &
	1782	skip_time_do3d = skip_time_data_output
	1783	IF ( skip_time_data_output_av == 9999999.9 ) &
	1784	skip_time_data_output_av = skip_time_data_output
[564]	1785	DO mid = 1, max_masks
[410]	1786	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1787	skip_time_domask(mid) = skip_time_data_output
	1788	ENDDO
[1]	1789
	1790	!
	1791	!-- Check the average intervals (first for 3d-data, then for profiles and
	1792	!-- spectra)
	1793	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1794	WRITE( message_string, * ) 'averaging_interval = ', &
	1795	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1796	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1797	ENDIF
	1798
	1799	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1800	averaging_interval_pr = averaging_interval
	1801	ENDIF
	1802
	1803	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1804	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1805	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1806	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1807	ENDIF
	1808
	1809	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1810	averaging_interval_sp = averaging_interval
	1811	ENDIF
	1812
	1813	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1814	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1815	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1816	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1817	ENDIF
	1818
	1819	!
	1820	!-- Set the default interval for profiles entering the temporal average
	1821	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1822	dt_averaging_input_pr = dt_averaging_input
	1823	ENDIF
	1824
	1825	!
	1826	!-- Set the default interval for the output of timeseries to a reasonable
	1827	!-- value (tries to minimize the number of calls of flow_statistics)
	1828	IF ( dt_dots == 9999999.9 ) THEN
	1829	IF ( averaging_interval_pr == 0.0 ) THEN
	1830	dt_dots = MIN( dt_run_control, dt_dopr )
	1831	ELSE
	1832	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1833	ENDIF
	1834	ENDIF
	1835
	1836	!
	1837	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1838	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1839	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1840	dt_averaging_input, ' must be <= averaging_interval = ', &
	1841	averaging_interval
[226]	1842	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1843	ENDIF
	1844
	1845	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1846	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1847	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1848	averaging_interval_pr
[226]	1849	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1850	ENDIF
	1851
	1852	!
[72]	1853	!-- Set the default value for the integration interval of precipitation amount
	1854	IF ( precipitation ) THEN
	1855	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1856	precipitation_amount_interval = dt_do2d_xy
	1857	ELSE
	1858	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1859	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1860	precipitation_amount_interval, ' must not be larger than ', &
	1861	'dt_do2d_xy = ', dt_do2d_xy
[226]	1862	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1863	ENDIF
	1864	ENDIF
	1865	ENDIF
	1866
	1867	!
[1]	1868	!-- Determine the number of output profiles and check whether they are
	1869	!-- permissible
	1870	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1871
	1872	dopr_n = dopr_n + 1
	1873	i = dopr_n
	1874
	1875	!
	1876	!-- Determine internal profile number (for hom, homs)
	1877	!-- and store height levels
	1878	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1879
	1880	CASE ( 'u', '#u' )
	1881	dopr_index(i) = 1
[87]	1882	dopr_unit(i) = 'm/s'
[1]	1883	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1884	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1885	dopr_initial_index(i) = 5
	1886	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1887	data_output_pr(i) = data_output_pr(i)(2:)
	1888	ENDIF
	1889
	1890	CASE ( 'v', '#v' )
	1891	dopr_index(i) = 2
[87]	1892	dopr_unit(i) = 'm/s'
	1893	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1894	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1895	dopr_initial_index(i) = 6
	1896	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1897	data_output_pr(i) = data_output_pr(i)(2:)
	1898	ENDIF
	1899
	1900	CASE ( 'w' )
	1901	dopr_index(i) = 3
[87]	1902	dopr_unit(i) = 'm/s'
	1903	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1904
	1905	CASE ( 'pt', '#pt' )
	1906	IF ( .NOT. cloud_physics ) THEN
	1907	dopr_index(i) = 4
[87]	1908	dopr_unit(i) = 'K'
[1]	1909	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1910	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1911	dopr_initial_index(i) = 7
	1912	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1913	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1914	data_output_pr(i) = data_output_pr(i)(2:)
	1915	ENDIF
	1916	ELSE
	1917	dopr_index(i) = 43
[87]	1918	dopr_unit(i) = 'K'
[1]	1919	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1920	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1921	dopr_initial_index(i) = 28
	1922	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1923	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1924	data_output_pr(i) = data_output_pr(i)(2:)
	1925	ENDIF
	1926	ENDIF
	1927
	1928	CASE ( 'e' )
	1929	dopr_index(i) = 8
[87]	1930	dopr_unit(i) = 'm2/s2'
[1]	1931	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1932	hom(nzb,2,8,:) = 0.0
	1933
	1934	CASE ( 'km', '#km' )
	1935	dopr_index(i) = 9
[87]	1936	dopr_unit(i) = 'm2/s'
[1]	1937	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1938	hom(nzb,2,9,:) = 0.0
	1939	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1940	dopr_initial_index(i) = 23
	1941	hom(:,2,23,:) = hom(:,2,9,:)
	1942	data_output_pr(i) = data_output_pr(i)(2:)
	1943	ENDIF
	1944
	1945	CASE ( 'kh', '#kh' )
	1946	dopr_index(i) = 10
[87]	1947	dopr_unit(i) = 'm2/s'
[1]	1948	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1949	hom(nzb,2,10,:) = 0.0
	1950	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1951	dopr_initial_index(i) = 24
	1952	hom(:,2,24,:) = hom(:,2,10,:)
	1953	data_output_pr(i) = data_output_pr(i)(2:)
	1954	ENDIF
	1955
	1956	CASE ( 'l', '#l' )
	1957	dopr_index(i) = 11
[87]	1958	dopr_unit(i) = 'm'
[1]	1959	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1960	hom(nzb,2,11,:) = 0.0
	1961	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1962	dopr_initial_index(i) = 25
	1963	hom(:,2,25,:) = hom(:,2,11,:)
	1964	data_output_pr(i) = data_output_pr(i)(2:)
	1965	ENDIF
	1966
	1967	CASE ( 'w"u"' )
	1968	dopr_index(i) = 12
[87]	1969	dopr_unit(i) = 'm2/s2'
[1]	1970	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1971	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1972
	1973	CASE ( 'wu' )
	1974	dopr_index(i) = 13
[87]	1975	dopr_unit(i) = 'm2/s2'
[1]	1976	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1977
	1978	CASE ( 'w"v"' )
	1979	dopr_index(i) = 14
[87]	1980	dopr_unit(i) = 'm2/s2'
[1]	1981	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1982	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1983
	1984	CASE ( 'wv' )
	1985	dopr_index(i) = 15
[87]	1986	dopr_unit(i) = 'm2/s2'
[1]	1987	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1988
	1989	CASE ( 'w"pt"' )
	1990	dopr_index(i) = 16
[87]	1991	dopr_unit(i) = 'K m/s'
[1]	1992	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1993
	1994	CASE ( 'wpt' )
	1995	dopr_index(i) = 17
[87]	1996	dopr_unit(i) = 'K m/s'
[1]	1997	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1998
	1999	CASE ( 'wpt' )
	2000	dopr_index(i) = 18
[87]	2001	dopr_unit(i) = 'K m/s'
[1]	2002	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	2003
	2004	CASE ( 'wu' )
	2005	dopr_index(i) = 19
[87]	2006	dopr_unit(i) = 'm2/s2'
[1]	2007	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	2008	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	2009
	2010	CASE ( 'wv' )
	2011	dopr_index(i) = 20
[87]	2012	dopr_unit(i) = 'm2/s2'
[1]	2013	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2014	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2015
	2016	CASE ( 'wptBC' )
	2017	dopr_index(i) = 21
[87]	2018	dopr_unit(i) = 'K m/s'
[1]	2019	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2020
	2021	CASE ( 'wptBC' )
	2022	dopr_index(i) = 22
[87]	2023	dopr_unit(i) = 'K m/s'
[1]	2024	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2025
[96]	2026	CASE ( 'sa', '#sa' )
	2027	IF ( .NOT. ocean ) THEN
[215]	2028	message_string = 'data_output_pr = ' // &
	2029	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2030	'lemented for ocean = .FALSE.'
[226]	2031	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2032	ELSE
	2033	dopr_index(i) = 23
	2034	dopr_unit(i) = 'psu'
	2035	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2036	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2037	dopr_initial_index(i) = 26
	2038	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2039	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2040	data_output_pr(i) = data_output_pr(i)(2:)
	2041	ENDIF
	2042	ENDIF
	2043
[1]	2044	CASE ( 'u*2' )
	2045	dopr_index(i) = 30
[87]	2046	dopr_unit(i) = 'm2/s2'
[1]	2047	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2048
	2049	CASE ( 'v*2' )
	2050	dopr_index(i) = 31
[87]	2051	dopr_unit(i) = 'm2/s2'
[1]	2052	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2053
	2054	CASE ( 'w*2' )
	2055	dopr_index(i) = 32
[87]	2056	dopr_unit(i) = 'm2/s2'
[1]	2057	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2058
	2059	CASE ( 'pt*2' )
	2060	dopr_index(i) = 33
[87]	2061	dopr_unit(i) = 'K2'
[1]	2062	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2063
	2064	CASE ( 'e*' )
	2065	dopr_index(i) = 34
[87]	2066	dopr_unit(i) = 'm2/s2'
[1]	2067	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2068
	2069	CASE ( 'w2pt' )
	2070	dopr_index(i) = 35
[87]	2071	dopr_unit(i) = 'K m2/s2'
[1]	2072	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2073
	2074	CASE ( 'wpt2' )
	2075	dopr_index(i) = 36
[87]	2076	dopr_unit(i) = 'K2 m/s'
[1]	2077	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2078
	2079	CASE ( 'we' )
	2080	dopr_index(i) = 37
[87]	2081	dopr_unit(i) = 'm3/s3'
[1]	2082	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2083
	2084	CASE ( 'w*3' )
	2085	dopr_index(i) = 38
[87]	2086	dopr_unit(i) = 'm3/s3'
[1]	2087	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2088
	2089	CASE ( 'Sw' )
	2090	dopr_index(i) = 39
[89]	2091	dopr_unit(i) = 'none'
[1]	2092	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2093
[232]	2094	CASE ( 'p' )
	2095	dopr_index(i) = 40
	2096	dopr_unit(i) = 'Pa'
	2097	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2098
[1]	2099	CASE ( 'q', '#q' )
[108]	2100	IF ( .NOT. humidity ) THEN
[215]	2101	message_string = 'data_output_pr = ' // &
	2102	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2103	'lemented for humidity = .FALSE.'
[226]	2104	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2105	ELSE
	2106	dopr_index(i) = 41
[87]	2107	dopr_unit(i) = 'kg/kg'
	2108	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2109	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2110	dopr_initial_index(i) = 26
	2111	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2112	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2113	data_output_pr(i) = data_output_pr(i)(2:)
	2114	ENDIF
	2115	ENDIF
	2116
	2117	CASE ( 's', '#s' )
	2118	IF ( .NOT. passive_scalar ) THEN
[215]	2119	message_string = 'data_output_pr = ' // &
	2120	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2121	'lemented for passive_scalar = .FALSE.'
[226]	2122	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2123	ELSE
	2124	dopr_index(i) = 41
[87]	2125	dopr_unit(i) = 'kg/m3'
	2126	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2127	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2128	dopr_initial_index(i) = 26
	2129	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2130	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2131	data_output_pr(i) = data_output_pr(i)(2:)
	2132	ENDIF
	2133	ENDIF
	2134
	2135	CASE ( 'qv', '#qv' )
	2136	IF ( .NOT. cloud_physics ) THEN
	2137	dopr_index(i) = 41
[87]	2138	dopr_unit(i) = 'kg/kg'
	2139	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2140	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2141	dopr_initial_index(i) = 26
	2142	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2143	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2144	data_output_pr(i) = data_output_pr(i)(2:)
	2145	ENDIF
	2146	ELSE
	2147	dopr_index(i) = 42
[87]	2148	dopr_unit(i) = 'kg/kg'
	2149	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2150	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2151	dopr_initial_index(i) = 27
	2152	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2153	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2154	data_output_pr(i) = data_output_pr(i)(2:)
	2155	ENDIF
	2156	ENDIF
	2157
	2158	CASE ( 'lpt', '#lpt' )
	2159	IF ( .NOT. cloud_physics ) THEN
[215]	2160	message_string = 'data_output_pr = ' // &
	2161	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2162	'lemented for cloud_physics = .FALSE.'
[226]	2163	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2164	ELSE
	2165	dopr_index(i) = 4
[87]	2166	dopr_unit(i) = 'K'
[1]	2167	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2168	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2169	dopr_initial_index(i) = 7
	2170	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2171	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2172	data_output_pr(i) = data_output_pr(i)(2:)
	2173	ENDIF
	2174	ENDIF
	2175
	2176	CASE ( 'vpt', '#vpt' )
	2177	dopr_index(i) = 44
[87]	2178	dopr_unit(i) = 'K'
	2179	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2180	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2181	dopr_initial_index(i) = 29
	2182	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2183	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2184	data_output_pr(i) = data_output_pr(i)(2:)
	2185	ENDIF
	2186
	2187	CASE ( 'w"vpt"' )
	2188	dopr_index(i) = 45
[87]	2189	dopr_unit(i) = 'K m/s'
[1]	2190	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2191
	2192	CASE ( 'wvpt' )
	2193	dopr_index(i) = 46
[87]	2194	dopr_unit(i) = 'K m/s'
[1]	2195	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2196
	2197	CASE ( 'wvpt' )
	2198	dopr_index(i) = 47
[87]	2199	dopr_unit(i) = 'K m/s'
[1]	2200	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2201
	2202	CASE ( 'w"q"' )
[108]	2203	IF ( .NOT. humidity ) THEN
[215]	2204	message_string = 'data_output_pr = ' // &
	2205	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2206	'lemented for humidity = .FALSE.'
[226]	2207	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2208	ELSE
	2209	dopr_index(i) = 48
[87]	2210	dopr_unit(i) = 'kg/kg m/s'
[1]	2211	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2212	ENDIF
	2213
	2214	CASE ( 'wq' )
[108]	2215	IF ( .NOT. humidity ) THEN
[215]	2216	message_string = 'data_output_pr = ' // &
	2217	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2218	'lemented for humidity = .FALSE.'
[226]	2219	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2220	ELSE
	2221	dopr_index(i) = 49
[87]	2222	dopr_unit(i) = 'kg/kg m/s'
[1]	2223	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2224	ENDIF
	2225
	2226	CASE ( 'wq' )
[108]	2227	IF ( .NOT. humidity ) THEN
[215]	2228	message_string = 'data_output_pr = ' // &
	2229	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2230	'lemented for humidity = .FALSE.'
[226]	2231	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2232	ELSE
	2233	dopr_index(i) = 50
[87]	2234	dopr_unit(i) = 'kg/kg m/s'
[1]	2235	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2236	ENDIF
	2237
	2238	CASE ( 'w"s"' )
	2239	IF ( .NOT. passive_scalar ) THEN
[215]	2240	message_string = 'data_output_pr = ' // &
	2241	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2242	'lemented for passive_scalar = .FALSE.'
[226]	2243	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2244	ELSE
	2245	dopr_index(i) = 48
[87]	2246	dopr_unit(i) = 'kg/m3 m/s'
[1]	2247	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2248	ENDIF
	2249
	2250	CASE ( 'ws' )
	2251	IF ( .NOT. passive_scalar ) THEN
[215]	2252	message_string = 'data_output_pr = ' // &
	2253	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2254	'lemented for passive_scalar = .FALSE.'
[226]	2255	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2256	ELSE
	2257	dopr_index(i) = 49
[87]	2258	dopr_unit(i) = 'kg/m3 m/s'
[1]	2259	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2260	ENDIF
	2261
	2262	CASE ( 'ws' )
	2263	IF ( .NOT. passive_scalar ) THEN
[215]	2264	message_string = 'data_output_pr = ' // &
	2265	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2266	'lemented for passive_scalar = .FALSE.'
[226]	2267	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2268	ELSE
	2269	dopr_index(i) = 50
[87]	2270	dopr_unit(i) = 'kg/m3 m/s'
[1]	2271	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2272	ENDIF
	2273
	2274	CASE ( 'w"qv"' )
[75]	2275	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2276	THEN
	2277	dopr_index(i) = 48
[87]	2278	dopr_unit(i) = 'kg/kg m/s'
[1]	2279	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2280	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2281	dopr_index(i) = 51
[87]	2282	dopr_unit(i) = 'kg/kg m/s'
[1]	2283	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2284	ELSE
[215]	2285	message_string = 'data_output_pr = ' // &
	2286	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2287	'lemented for cloud_physics = .FALSE. an&' // &
	2288	'd humidity = .FALSE.'
[226]	2289	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2290	ENDIF
	2291
	2292	CASE ( 'wqv' )
[75]	2293	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2294	THEN
	2295	dopr_index(i) = 49
[87]	2296	dopr_unit(i) = 'kg/kg m/s'
[1]	2297	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2298	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2299	dopr_index(i) = 52
[87]	2300	dopr_unit(i) = 'kg/kg m/s'
[1]	2301	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2302	ELSE
[215]	2303	message_string = 'data_output_pr = ' // &
	2304	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2305	'lemented for cloud_physics = .FALSE. an&' // &
	2306	'd humidity = .FALSE.'
[226]	2307	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2308	ENDIF
	2309
	2310	CASE ( 'wqv' )
[75]	2311	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2312	THEN
	2313	dopr_index(i) = 50
[87]	2314	dopr_unit(i) = 'kg/kg m/s'
[1]	2315	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2316	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2317	dopr_index(i) = 53
[87]	2318	dopr_unit(i) = 'kg/kg m/s'
[1]	2319	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2320	ELSE
[215]	2321	message_string = 'data_output_pr = ' // &
	2322	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2323	'lemented for cloud_physics = .FALSE. an&' // &
	2324	'd humidity = .FALSE.'
[226]	2325	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2326	ENDIF
	2327
	2328	CASE ( 'ql' )
	2329	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2330	message_string = 'data_output_pr = ' // &
	2331	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2332	'lemented for cloud_physics = .FALSE. or' // &
	2333	'&cloud_droplets = .FALSE.'
[226]	2334	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2335	ELSE
	2336	dopr_index(i) = 54
[87]	2337	dopr_unit(i) = 'kg/kg'
[1]	2338	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2339	ENDIF
	2340
[524]	2341	CASE ( 'wuu*:dz' )
[1]	2342	dopr_index(i) = 55
[87]	2343	dopr_unit(i) = 'm2/s3'
[1]	2344	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2345
[524]	2346	CASE ( 'wp:dz' )
[1]	2347	dopr_index(i) = 56
[87]	2348	dopr_unit(i) = 'm2/s3'
[106]	2349	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2350
[524]	2351	CASE ( 'w"e:dz' )
[1]	2352	dopr_index(i) = 57
[87]	2353	dopr_unit(i) = 'm2/s3'
[1]	2354	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2355
[667]	2356
[1]	2357	CASE ( 'u"pt"' )
	2358	dopr_index(i) = 58
[87]	2359	dopr_unit(i) = 'K m/s'
[1]	2360	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2361
	2362	CASE ( 'upt' )
	2363	dopr_index(i) = 59
[87]	2364	dopr_unit(i) = 'K m/s'
[1]	2365	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2366
	2367	CASE ( 'upt_t' )
	2368	dopr_index(i) = 60
[87]	2369	dopr_unit(i) = 'K m/s'
[1]	2370	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2371
	2372	CASE ( 'v"pt"' )
	2373	dopr_index(i) = 61
[87]	2374	dopr_unit(i) = 'K m/s'
[1]	2375	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2376
	2377	CASE ( 'vpt' )
	2378	dopr_index(i) = 62
[87]	2379	dopr_unit(i) = 'K m/s'
[1]	2380	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2381
	2382	CASE ( 'vpt_t' )
	2383	dopr_index(i) = 63
[87]	2384	dopr_unit(i) = 'K m/s'
[1]	2385	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2386
[96]	2387	CASE ( 'rho' )
[388]	2388	IF ( .NOT. ocean ) THEN
	2389	message_string = 'data_output_pr = ' // &
	2390	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2391	'lemented for ocean = .FALSE.'
	2392	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2393	ELSE
	2394	dopr_index(i) = 64
	2395	dopr_unit(i) = 'kg/m3'
	2396	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2397	ENDIF
[1]	2398
[96]	2399	CASE ( 'w"sa"' )
	2400	IF ( .NOT. ocean ) THEN
[215]	2401	message_string = 'data_output_pr = ' // &
	2402	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2403	'lemented for ocean = .FALSE.'
[226]	2404	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2405	ELSE
	2406	dopr_index(i) = 65
	2407	dopr_unit(i) = 'psu m/s'
	2408	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2409	ENDIF
	2410
	2411	CASE ( 'wsa' )
	2412	IF ( .NOT. ocean ) THEN
[215]	2413	message_string = 'data_output_pr = ' // &
	2414	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2415	'lemented for ocean = .FALSE.'
[226]	2416	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2417	ELSE
	2418	dopr_index(i) = 66
	2419	dopr_unit(i) = 'psu m/s'
	2420	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2421	ENDIF
	2422
	2423	CASE ( 'wsa' )
	2424	IF ( .NOT. ocean ) THEN
[215]	2425	message_string = 'data_output_pr = ' // &
	2426	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2427	'lemented for ocean = .FALSE.'
[226]	2428	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2429	ELSE
	2430	dopr_index(i) = 67
	2431	dopr_unit(i) = 'psu m/s'
	2432	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2433	ENDIF
	2434
[106]	2435	CASE ( 'wp' )
	2436	dopr_index(i) = 68
	2437	dopr_unit(i) = 'm3/s3'
	2438	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2439
[106]	2440	CASE ( 'w"e' )
	2441	dopr_index(i) = 69
	2442	dopr_unit(i) = 'm3/s3'
	2443	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2444
[197]	2445	CASE ( 'q*2' )
	2446	IF ( .NOT. humidity ) THEN
[215]	2447	message_string = 'data_output_pr = ' // &
	2448	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2449	'lemented for humidity = .FALSE.'
[226]	2450	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2451	ELSE
	2452	dopr_index(i) = 70
	2453	dopr_unit(i) = 'kg2/kg2'
	2454	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2455	ENDIF
[106]	2456
[388]	2457	CASE ( 'prho' )
	2458	IF ( .NOT. ocean ) THEN
	2459	message_string = 'data_output_pr = ' // &
	2460	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2461	'lemented for ocean = .FALSE.'
	2462	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2463	ELSE
	2464	dopr_index(i) = 71
	2465	dopr_unit(i) = 'kg/m3'
	2466	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2467	ENDIF
	2468
	2469	CASE ( 'hyp' )
	2470	dopr_index(i) = 72
[531]	2471	dopr_unit(i) = 'dbar'
[388]	2472	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2473
[1]	2474	CASE DEFAULT
[87]	2475
	2476	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2477
	2478	IF ( unit == 'illegal' ) THEN
[215]	2479	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2480	message_string = 'illegal value for data_output_pr or ' // &
	2481	'data_output_pr_user = "' // &
	2482	TRIM( data_output_pr(i) ) // '"'
[226]	2483	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2484	ELSE
	2485	message_string = 'illegal value for data_output_pr = "' // &
	2486	TRIM( data_output_pr(i) ) // '"'
[226]	2487	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2488	ENDIF
[1]	2489	ENDIF
	2490
	2491	END SELECT
[667]	2492
[1]	2493	!
	2494	!-- Check to which of the predefined coordinate systems the profile belongs
	2495	DO k = 1, crmax
	2496	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2497	/=0 ) &
	2498	THEN
	2499	dopr_crossindex(i) = k
	2500	EXIT
	2501	ENDIF
	2502	ENDDO
	2503	!
	2504	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2505	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2506	!-- control characters
	2507	dopr_label(i) = data_output_pr(i)
	2508	position = INDEX( dopr_label(i) , '"' )
	2509	DO WHILE ( position /= 0 )
	2510	dopr_label(i)(position:position) = ''''
	2511	position = INDEX( dopr_label(i) , '"' )
	2512	ENDDO
	2513
	2514	ENDDO
	2515
	2516	!
	2517	!-- y-value range of the coordinate system (PROFIL).
	2518	!-- x-value range determined in plot_1d.
[94]	2519	IF ( .NOT. ocean ) THEN
	2520	cross_uymin = 0.0
	2521	IF ( z_max_do1d == -1.0 ) THEN
	2522	cross_uymax = zu(nzt+1)
	2523	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2524	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2525	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2526	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2527	ELSE
	2528	cross_uymax = z_max_do1d
	2529	ENDIF
[1]	2530	ENDIF
	2531
	2532	!
	2533	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2534	!-- permissible
	2535	DO i = 1, crmax
	2536	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2537
	2538	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2539	j = 0
	2540
	2541	CASE DEFAULT
[215]	2542	message_string = 'unknown normalization method cross_normali' // &
	2543	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2544	'"'
[226]	2545	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2546
	2547	END SELECT
	2548	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2549
	2550	CASE ( '', 'z_i' )
	2551	j = 0
	2552
	2553	CASE DEFAULT
[215]	2554	message_string = 'unknown normalization method cross_normali' // &
	2555	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2556	'"'
[226]	2557	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2558
	2559	END SELECT
	2560	ENDDO
	2561	!
	2562	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2563	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2564	THEN
[215]	2565	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2566	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2567	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2568	ENDIF
	2569
	2570
	2571	!
	2572	!-- Append user-defined data output variables to the standard data output
	2573	IF ( data_output_user(1) /= ' ' ) THEN
	2574	i = 1
	2575	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2576	i = i + 1
	2577	ENDDO
	2578	j = 1
	2579	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2580	IF ( i > 100 ) THEN
[215]	2581	message_string = 'number of output quantitities given by data' // &
	2582	'_output and data_output_user exceeds the limit of 100'
[226]	2583	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2584	ENDIF
	2585	data_output(i) = data_output_user(j)
	2586	i = i + 1
	2587	j = j + 1
	2588	ENDDO
	2589	ENDIF
	2590
	2591	!
	2592	!-- Check and set steering parameters for 2d/3d data output and averaging
	2593	i = 1
	2594	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2595	!
	2596	!-- Check for data averaging
	2597	ilen = LEN_TRIM( data_output(i) )
	2598	j = 0 ! no data averaging
	2599	IF ( ilen > 3 ) THEN
	2600	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2601	j = 1 ! data averaging
	2602	data_output(i) = data_output(i)(1:ilen-3)
	2603	ENDIF
	2604	ENDIF
	2605	!
	2606	!-- Check for cross section or volume data
	2607	ilen = LEN_TRIM( data_output(i) )
	2608	k = 0 ! 3d data
	2609	var = data_output(i)(1:ilen)
	2610	IF ( ilen > 3 ) THEN
	2611	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2612	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2613	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2614	k = 1 ! 2d data
	2615	var = data_output(i)(1:ilen-3)
	2616	ENDIF
	2617	ENDIF
	2618	!
	2619	!-- Check for allowed value and set units
	2620	SELECT CASE ( TRIM( var ) )
	2621
	2622	CASE ( 'e' )
	2623	IF ( constant_diffusion ) THEN
[215]	2624	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2625	'res constant_diffusion = .FALSE.'
[226]	2626	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2627	ENDIF
	2628	unit = 'm2/s2'
	2629
[771]	2630	CASE ( 'lpt' )
	2631	IF ( .NOT. cloud_physics ) THEN
	2632	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2633	'res cloud_physics = .TRUE.'
	2634	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2635	ENDIF
	2636	unit = 'K'
	2637
[1]	2638	CASE ( 'pc', 'pr' )
	2639	IF ( .NOT. particle_advection ) THEN
[215]	2640	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2641	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2642	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2643	ENDIF
	2644	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2645	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2646
	2647	CASE ( 'q', 'vpt' )
[75]	2648	IF ( .NOT. humidity ) THEN
[215]	2649	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2650	'res humidity = .TRUE.'
[226]	2651	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2652	ENDIF
	2653	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2654	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2655
	2656	CASE ( 'ql' )
	2657	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2658	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2659	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2660	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2661	ENDIF
	2662	unit = 'kg/kg'
	2663
	2664	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2665	IF ( .NOT. cloud_droplets ) THEN
[215]	2666	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2667	'res cloud_droplets = .TRUE.'
[226]	2668	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2669	ENDIF
	2670	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2671	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2672	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2673
	2674	CASE ( 'qv' )
	2675	IF ( .NOT. cloud_physics ) THEN
[215]	2676	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2677	'res cloud_physics = .TRUE.'
[226]	2678	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2679	ENDIF
	2680	unit = 'kg/kg'
	2681
[96]	2682	CASE ( 'rho' )
	2683	IF ( .NOT. ocean ) THEN
[215]	2684	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2685	'res ocean = .TRUE.'
[226]	2686	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2687	ENDIF
	2688	unit = 'kg/m3'
	2689
[1]	2690	CASE ( 's' )
	2691	IF ( .NOT. passive_scalar ) THEN
[215]	2692	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2693	'res passive_scalar = .TRUE.'
[226]	2694	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2695	ENDIF
	2696	unit = 'conc'
	2697
[96]	2698	CASE ( 'sa' )
	2699	IF ( .NOT. ocean ) THEN
[215]	2700	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2701	'res ocean = .TRUE.'
[226]	2702	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2703	ENDIF
	2704	unit = 'psu'
	2705
[354]	2706	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2707	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2708	message_string = 'illegal value for data_output: "' // &
	2709	TRIM( var ) // '" & only 2d-horizontal ' // &
	2710	'cross sections are allowed for this value'
[226]	2711	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2712	ENDIF
	2713	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2714	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2715	'res cloud_physics = .TRUE.'
[226]	2716	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2717	ENDIF
[72]	2718	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2719	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2720	'res precipitation = .TRUE.'
[226]	2721	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2722	ENDIF
	2723	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2724	message_string = 'temporal averaging of precipitation ' // &
	2725	'amount "' // TRIM( var ) // '" is not possible'
[226]	2726	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2727	ENDIF
	2728	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2729	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2730	'res precipitation = .TRUE.'
[226]	2731	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2732	ENDIF
[354]	2733	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2734	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2735	'res humidity = .TRUE.'
	2736	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2737	ENDIF
[72]	2738
[354]	2739	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2740	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2741	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2742	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2743	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2744	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2745	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2746	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2747
[1]	2748
	2749	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2750	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2751	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2752	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2753	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2754	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2755	CONTINUE
	2756
	2757	CASE DEFAULT
	2758	CALL user_check_data_output( var, unit )
	2759
	2760	IF ( unit == 'illegal' ) THEN
[215]	2761	IF ( data_output_user(1) /= ' ' ) THEN
	2762	message_string = 'illegal value for data_output or ' // &
	2763	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2764	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2765	ELSE
	2766	message_string = 'illegal value for data_output =' // &
	2767	TRIM( data_output(i) ) // '"'
[226]	2768	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2769	ENDIF
	2770	ENDIF
	2771
	2772	END SELECT
	2773	!
	2774	!-- Set the internal steering parameters appropriately
	2775	IF ( k == 0 ) THEN
	2776	do3d_no(j) = do3d_no(j) + 1
	2777	do3d(j,do3d_no(j)) = data_output(i)
	2778	do3d_unit(j,do3d_no(j)) = unit
	2779	ELSE
	2780	do2d_no(j) = do2d_no(j) + 1
	2781	do2d(j,do2d_no(j)) = data_output(i)
	2782	do2d_unit(j,do2d_no(j)) = unit
	2783	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2784	data_output_xy(j) = .TRUE.
	2785	ENDIF
	2786	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2787	data_output_xz(j) = .TRUE.
	2788	ENDIF
	2789	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2790	data_output_yz(j) = .TRUE.
	2791	ENDIF
	2792	ENDIF
	2793
	2794	IF ( j == 1 ) THEN
	2795	!
	2796	!-- Check, if variable is already subject to averaging
	2797	found = .FALSE.
	2798	DO k = 1, doav_n
	2799	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2800	ENDDO
	2801
	2802	IF ( .NOT. found ) THEN
	2803	doav_n = doav_n + 1
	2804	doav(doav_n) = var
	2805	ENDIF
	2806	ENDIF
	2807
	2808	i = i + 1
	2809	ENDDO
	2810
	2811	!
[376]	2812	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2813	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2814	WRITE( message_string, * ) 'output of averaged quantity "', &
	2815	TRIM( doav(1) ), '_av" requires to set a ', &
	2816	'non-zero & averaging interval'
	2817	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2818	ENDIF
	2819
	2820	!
[308]	2821	!-- Check sectional planes and store them in one shared array
	2822	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2823	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2824	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2825	ENDIF
	2826	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2827	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2828	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2829	ENDIF
	2830	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2831	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2832	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2833	ENDIF
[1]	2834	section(:,1) = section_xy
	2835	section(:,2) = section_xz
	2836	section(:,3) = section_yz
	2837
	2838	!
	2839	!-- Upper plot limit (grid point value) for 1D profiles
	2840	IF ( z_max_do1d == -1.0 ) THEN
[667]	2841
[1]	2842	nz_do1d = nzt+1
[667]	2843
[1]	2844	ELSE
	2845	DO k = nzb+1, nzt+1
	2846	nz_do1d = k
	2847	IF ( zw(k) > z_max_do1d ) EXIT
	2848	ENDDO
	2849	ENDIF
	2850
	2851	!
	2852	!-- Upper plot limit for 2D vertical sections
	2853	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2854	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2855	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2856	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2857	' (zu(nzt))'
[226]	2858	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2859	ENDIF
	2860
	2861	!
	2862	!-- Upper plot limit for 3D arrays
	2863	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2864
	2865	!
	2866	!-- Determine and check accuracy for compressed 3D plot output
	2867	IF ( do3d_compress ) THEN
	2868	!
	2869	!-- Compression only permissible on T3E machines
	2870	IF ( host(1:3) /= 't3e' ) THEN
[215]	2871	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2872	TRIM( host ) // '"'
[226]	2873	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2874	ENDIF
	2875
	2876	i = 1
	2877	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2878
	2879	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2880	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2881	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2882	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2883	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2884	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2885	ENDIF
	2886
	2887	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2888	var = do3d_comp_prec(i)(1:ilen-1)
	2889
	2890	SELECT CASE ( var )
	2891
	2892	CASE ( 'u' )
	2893	j = 1
	2894	CASE ( 'v' )
	2895	j = 2
	2896	CASE ( 'w' )
	2897	j = 3
	2898	CASE ( 'p' )
	2899	j = 4
	2900	CASE ( 'pt' )
	2901	j = 5
	2902
	2903	CASE DEFAULT
[215]	2904	WRITE( message_string, * ) 'unknown variable "', &
	2905	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2906	i, ')'
[226]	2907	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2908
	2909	END SELECT
	2910
	2911	plot_3d_precision(j)%precision = prec
	2912	i = i + 1
	2913
	2914	ENDDO
	2915	ENDIF
	2916
	2917	!
	2918	!-- Check the data output format(s)
	2919	IF ( data_output_format(1) == ' ' ) THEN
	2920	!
	2921	!-- Default value
	2922	netcdf_output = .TRUE.
	2923	ELSE
	2924	i = 1
	2925	DO WHILE ( data_output_format(i) /= ' ' )
	2926
	2927	SELECT CASE ( data_output_format(i) )
	2928
	2929	CASE ( 'netcdf' )
	2930	netcdf_output = .TRUE.
	2931	CASE ( 'iso2d' )
	2932	iso2d_output = .TRUE.
	2933	CASE ( 'profil' )
	2934	profil_output = .TRUE.
	2935	CASE ( 'avs' )
	2936	avs_output = .TRUE.
	2937
	2938	CASE DEFAULT
[215]	2939	message_string = 'unknown value for data_output_format "' // &
	2940	TRIM( data_output_format(i) ) // '"'
[226]	2941	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2942
	2943	END SELECT
	2944
	2945	i = i + 1
	2946	IF ( i > 10 ) EXIT
	2947
	2948	ENDDO
	2949
	2950	ENDIF
	2951
	2952	!
[410]	2953	!-- Check mask conditions
[553]	2954	DO mid = 1, max_masks
[567]	2955	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	2956	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	2957	masks = masks + 1
	2958	ENDIF
	2959	ENDDO
	2960
[410]	2961	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2962	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2963	'<= ', max_masks, ' (=max_masks)'
[564]	2964	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	2965	ENDIF
	2966	IF ( masks > 0 ) THEN
	2967	mask_scale(1) = mask_scale_x
	2968	mask_scale(2) = mask_scale_y
	2969	mask_scale(3) = mask_scale_z
	2970	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2971	WRITE( message_string, * ) &
	2972	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2973	'must be > 0.0'
[564]	2974	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	2975	ENDIF
	2976	!
	2977	!-- Generate masks for masked data output
	2978	CALL init_masks
	2979	ENDIF
	2980
	2981	!
[493]	2982	!-- Check the NetCDF data format
[924]	2983	#if ! defined ( __check )
[493]	2984	IF ( netcdf_data_format > 2 ) THEN
[924]	2985	#if defined( __netcdf4 )
[493]	2986	CONTINUE
	2987	#else
	2988	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
	2989	'cpp-directive __netcdf4 given & switch ' // &
	2990	'back to 64-bit offset format'
	2991	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	2992	netcdf_data_format = 2
	2993	#endif
	2994	ENDIF
[892]	2995	#endif
[493]	2996	!
[667]	2997
[809]	2998	#if ! defined( __check )
[1]	2999	!-- Check netcdf precison
	3000	ldum = .FALSE.
	3001	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	3002	#endif
[1]	3003	!
	3004	!-- Check, whether a constant diffusion coefficient shall be used
	3005	IF ( km_constant /= -1.0 ) THEN
	3006	IF ( km_constant < 0.0 ) THEN
[215]	3007	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	3008	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	3009	ELSE
	3010	IF ( prandtl_number < 0.0 ) THEN
[215]	3011	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	3012	' < 0.0'
[226]	3013	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	3014	ENDIF
	3015	constant_diffusion = .TRUE.
	3016
	3017	IF ( prandtl_layer ) THEN
[215]	3018	message_string = 'prandtl_layer is not allowed with fixed ' // &
	3019	'value of km'
[226]	3020	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	3021	ENDIF
	3022	ENDIF
	3023	ENDIF
	3024
	3025	!
	3026	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	3027	!-- for the horizontal diffusivity used within the outflow damping layer,
	3028	!-- and check/set the width of the damping layer
	3029	IF ( bc_lr /= 'cyclic' ) THEN
	3030	IF ( km_damp_max == -1.0 ) THEN
	3031	km_damp_max = 0.5 * dx
	3032	ENDIF
	3033	IF ( outflow_damping_width == -1.0 ) THEN
	3034	outflow_damping_width = MIN( 20, nx/2 )
	3035	ENDIF
	3036	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	3037	message_string = 'outflow_damping width out of range'
[226]	3038	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3039	ENDIF
	3040	ENDIF
	3041
	3042	IF ( bc_ns /= 'cyclic' ) THEN
	3043	IF ( km_damp_max == -1.0 ) THEN
	3044	km_damp_max = 0.5 * dy
	3045	ENDIF
	3046	IF ( outflow_damping_width == -1.0 ) THEN
	3047	outflow_damping_width = MIN( 20, ny/2 )
	3048	ENDIF
	3049	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	3050	message_string = 'outflow_damping width out of range'
[226]	3051	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3052	ENDIF
	3053	ENDIF
	3054
	3055	!
	3056	!-- Check value range for rif
	3057	IF ( rif_min >= rif_max ) THEN
[215]	3058	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3059	'than rif_max = ', rif_max
[226]	3060	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3061	ENDIF
	3062
	3063	!
	3064	!-- Determine upper and lower hight level indices for random perturbations
[97]	3065	IF ( disturbance_level_b == -9999999.9 ) THEN
	3066	IF ( ocean ) THEN
	3067	disturbance_level_b = zu((nzt*2)/3)
	3068	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3069	ELSE
	3070	disturbance_level_b = zu(nzb+3)
	3071	disturbance_level_ind_b = nzb + 3
	3072	ENDIF
[1]	3073	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3074	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3075	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3076	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3077	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3078	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3079	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3080	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3081	ELSE
	3082	DO k = 3, nzt-2
	3083	IF ( disturbance_level_b <= zu(k) ) THEN
	3084	disturbance_level_ind_b = k
	3085	EXIT
	3086	ENDIF
	3087	ENDDO
	3088	ENDIF
	3089
[97]	3090	IF ( disturbance_level_t == -9999999.9 ) THEN
	3091	IF ( ocean ) THEN
	3092	disturbance_level_t = zu(nzt-3)
	3093	disturbance_level_ind_t = nzt - 3
	3094	ELSE
	3095	disturbance_level_t = zu(nzt/3)
	3096	disturbance_level_ind_t = nzt / 3
	3097	ENDIF
[1]	3098	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3099	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3100	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3101	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3102	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3103	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3104	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3105	disturbance_level_b
[226]	3106	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3107	ELSE
	3108	DO k = 3, nzt-2
	3109	IF ( disturbance_level_t <= zu(k) ) THEN
	3110	disturbance_level_ind_t = k
	3111	EXIT
	3112	ENDIF
	3113	ENDDO
	3114	ENDIF
	3115
	3116	!
	3117	!-- Check again whether the levels determined this way are ok.
	3118	!-- Error may occur at automatic determination and too few grid points in
	3119	!-- z-direction.
	3120	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3121	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3122	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3123	disturbance_level_b
[226]	3124	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3125	ENDIF
	3126
	3127	!
	3128	!-- Determine the horizontal index range for random perturbations.
	3129	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3130	!-- near the inflow and the perturbation area is further limited to ...(1)
	3131	!-- after the initial phase of the flow.
	3132	dist_nxl = 0; dist_nxr = nx
	3133	dist_nys = 0; dist_nyn = ny
	3134	IF ( bc_lr /= 'cyclic' ) THEN
	3135	IF ( inflow_disturbance_begin == -1 ) THEN
	3136	inflow_disturbance_begin = MIN( 10, nx/2 )
	3137	ENDIF
	3138	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3139	THEN
[215]	3140	message_string = 'inflow_disturbance_begin out of range'
[226]	3141	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3142	ENDIF
	3143	IF ( inflow_disturbance_end == -1 ) THEN
	3144	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3145	ENDIF
	3146	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3147	THEN
[215]	3148	message_string = 'inflow_disturbance_end out of range'
[226]	3149	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3150	ENDIF
	3151	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3152	IF ( inflow_disturbance_begin == -1 ) THEN
	3153	inflow_disturbance_begin = MIN( 10, ny/2 )
	3154	ENDIF
	3155	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3156	THEN
[215]	3157	message_string = 'inflow_disturbance_begin out of range'
[226]	3158	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3159	ENDIF
	3160	IF ( inflow_disturbance_end == -1 ) THEN
	3161	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3162	ENDIF
	3163	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3164	THEN
[215]	3165	message_string = 'inflow_disturbance_end out of range'
[226]	3166	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3167	ENDIF
	3168	ENDIF
	3169
[73]	3170	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3171	dist_nxr = nx - inflow_disturbance_begin
	3172	dist_nxl(1) = nx - inflow_disturbance_end
[73]	3173	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3174	dist_nxl = inflow_disturbance_begin
	3175	dist_nxr(1) = inflow_disturbance_end
[73]	3176	ENDIF
	3177	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3178	dist_nyn = ny - inflow_disturbance_begin
	3179	dist_nys(1) = ny - inflow_disturbance_end
[73]	3180	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3181	dist_nys = inflow_disturbance_begin
	3182	dist_nyn(1) = inflow_disturbance_end
	3183	ENDIF
	3184
	3185	!
[151]	3186	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3187	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	3188	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3189	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3190	'condition at the inflow boundary'
[226]	3191	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3192	ENDIF
	3193
	3194	!
	3195	!-- In case of turbulent inflow calculate the index of the recycling plane
	3196	IF ( turbulent_inflow ) THEN
	3197	IF ( recycling_width == 9999999.9 ) THEN
	3198	!
	3199	!-- Set the default value for the width of the recycling domain
	3200	recycling_width = 0.1 * nx * dx
	3201	ELSE
	3202	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3203	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3204	' ', recycling_width
[226]	3205	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3206	ENDIF
	3207	ENDIF
	3208	!
	3209	!-- Calculate the index
	3210	recycling_plane = recycling_width / dx
	3211	ENDIF
	3212
	3213	!
[1]	3214	!-- Check random generator
	3215	IF ( random_generator /= 'system-specific' .AND. &
	3216	random_generator /= 'numerical-recipes' ) THEN
[215]	3217	message_string = 'unknown random generator: random_generator = "' // &
	3218	TRIM( random_generator ) // '"'
[226]	3219	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3220	ENDIF
	3221
	3222	!
	3223	!-- Determine damping level index for 1D model
	3224	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3225	IF ( damp_level_1d == -1.0 ) THEN
	3226	damp_level_1d = zu(nzt+1)
	3227	damp_level_ind_1d = nzt + 1
	3228	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3229	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3230	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3231	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3232	ELSE
	3233	DO k = 1, nzt+1
	3234	IF ( damp_level_1d <= zu(k) ) THEN
	3235	damp_level_ind_1d = k
	3236	EXIT
	3237	ENDIF
	3238	ENDDO
	3239	ENDIF
	3240	ENDIF
[215]	3241
[1]	3242	!
	3243	!-- Check some other 1d-model parameters
	3244	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3245	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3246	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3247	'" is unknown'
[226]	3248	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3249	ENDIF
	3250	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3251	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3252	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3253	'" is unknown'
[226]	3254	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3255	ENDIF
	3256
	3257	!
	3258	!-- Set time for the next user defined restart (time_restart is the
	3259	!-- internal parameter for steering restart events)
	3260	IF ( restart_time /= 9999999.9 ) THEN
[291]	3261	IF ( restart_time > time_since_reference_point ) THEN
	3262	time_restart = restart_time
	3263	ENDIF
[1]	3264	ELSE
	3265	!
	3266	!-- In case of a restart run, set internal parameter to default (no restart)
	3267	!-- if the NAMELIST-parameter restart_time is omitted
	3268	time_restart = 9999999.9
	3269	ENDIF
	3270
	3271	!
	3272	!-- Set default value of the time needed to terminate a model run
	3273	IF ( termination_time_needed == -1.0 ) THEN
	3274	IF ( host(1:3) == 'ibm' ) THEN
	3275	termination_time_needed = 300.0
	3276	ELSE
	3277	termination_time_needed = 35.0
	3278	ENDIF
	3279	ENDIF
	3280
	3281	!
	3282	!-- Check the time needed to terminate a model run
	3283	IF ( host(1:3) == 't3e' ) THEN
	3284	!
	3285	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3286	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3287	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3288	WRITE( message_string, * ) 'termination_time_needed = ', &
	3289	termination_time_needed, ' must be > 30.0 on host "', &
	3290	TRIM( host ), '"'
[226]	3291	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3292	ENDIF
	3293	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3294	!
	3295	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3296	!-- because the job time consumed before executing palm (for compiling,
	3297	!-- copying of files, etc.) has to be regarded
	3298	IF ( termination_time_needed < 300.0 ) THEN
[215]	3299	WRITE( message_string, * ) 'termination_time_needed = ', &
	3300	termination_time_needed, ' should be >= 300.0 on host "', &
	3301	TRIM( host ), '"'
[226]	3302	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3303	ENDIF
	3304	ENDIF
	3305
[217]	3306	!
[240]	3307	!-- Check pressure gradient conditions
	3308	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3309	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3310	'w are .TRUE. but one of them must be .FALSE.'
[240]	3311	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3312	ENDIF
	3313	IF ( dp_external ) THEN
	3314	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3315	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3316	' of range'
	3317	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3318	ENDIF
	3319	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3320	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3321	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3322	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3323	ENDIF
	3324	ENDIF
	3325	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3326	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3327	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3328	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3329	ENDIF
[241]	3330	IF ( conserve_volume_flow ) THEN
	3331	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3332
	3333	conserve_volume_flow_mode = 'initial_profiles'
	3334
[241]	3335	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3336	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3337	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3338	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3339	conserve_volume_flow_mode
	3340	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3341	ENDIF
[667]	3342	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3343	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3344	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3345	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3346	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3347	ENDIF
	3348	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3349	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3350	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3351	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3352	' or ''bulk_velocity'''
	3353	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3354	ENDIF
	3355	ENDIF
	3356	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3357	( .NOT. conserve_volume_flow .OR. &
	3358	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3359	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3360	'conserve_volume_flow = .T. and ', &
[241]	3361	'conserve_volume_flow_mode = ''bulk_velocity'''
	3362	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3363	ENDIF
[240]	3364
	3365	!
[264]	3366	!-- Check particle attributes
	3367	IF ( particle_color /= 'none' ) THEN
	3368	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3369	particle_color /= 'z' ) THEN
	3370	message_string = 'illegal value for parameter particle_color: ' // &
	3371	TRIM( particle_color)
	3372	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3373	ELSE
	3374	IF ( color_interval(2) <= color_interval(1) ) THEN
	3375	message_string = 'color_interval(2) <= color_interval(1)'
	3376	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3377	ENDIF
	3378	ENDIF
	3379	ENDIF
	3380
	3381	IF ( particle_dvrpsize /= 'none' ) THEN
	3382	IF ( particle_dvrpsize /= 'absw' ) THEN
	3383	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3384	' ' // TRIM( particle_color)
	3385	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3386	ELSE
	3387	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3388	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3389	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3390	ENDIF
	3391	ENDIF
	3392	ENDIF
	3393
	3394	!
[217]	3395	!-- Check &userpar parameters
	3396	CALL user_check_parameters
[1]	3397
[217]	3398
[667]	3399
[1]	3400	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |