Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 856

Last change on this file since 856 was 846, checked in by maronga, 13 years ago
Last commit documented
Property svn:keywords set to `Id`
File size: 132.3 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[667]	6	!
[846]	7	!
[668]	8	! Former revisions:
	9	! -----------------
[708]	10	! $Id: check_parameters.f90 846 2012-03-07 10:26:21Z suehring $
[687]	11	!
[846]	12	! 845 2012-03-07 10:23:05Z maronga
	13	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	14	!
[829]	15	! 828 2012-02-21 12:00:36Z raasch
	16	! check of collision_kernel extended
	17	!
[826]	18	! 825 2012-02-19 03:03:44Z raasch
	19	! check for collision_kernel and curvature_solution_effects
	20	!
[810]	21	! 809 2012-01-30 13:32:58Z maronga
	22	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	23	!
[808]	24	! 807 2012-01-25 11:53:51Z maronga
	25	! New cpp directive "__check" implemented which is used by check_namelist_files
	26	!
[775]	27	! 774 2011-10-27 13:34:16Z letzel
	28	! bugfix for prescribed u,v-profiles
	29	!
[768]	30	! 767 2011-10-14 06:39:12Z raasch
	31	! Calculating u,v-profiles from given profiles by linear interpolation.
	32	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	33	!
[708]	34	! 707 2011-03-29 11:39:40Z raasch
	35	! setting of bc_lr/ns_dirrad/raddir
	36	!
	37	! 689 2011-02-20 19:31:12z gryschka
[690]	38	! Bugfix for some logical expressions
	39	! (syntax was not compatible with all compilers)
[687]	40	!
[690]	41	! 680 2011-02-04 23:16:06Z gryschka
[681]	42	! init_vortex is not allowed with volume_flow_control
[668]	43	!
[674]	44	! 673 2011-01-18 16:19:48Z suehring
	45	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	46	!
[668]	47	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	48	! Exchange of parameters between ocean and atmosphere via PE0
	49	! Check for illegal combination of ws-scheme and timestep scheme.
	50	! Check for topography and ws-scheme.
	51	! Check for not cyclic boundary conditions in combination with ws-scheme and
	52	! loop_optimization = 'vector'.
	53	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	54	! Different processor/grid topology in atmosphere and ocean is now allowed!
	55	! Bugfixes in checking for conserve_volume_flow_mode
[601]	56	! 600 2010-11-24 16:10:51Z raasch
	57	! change due to new default value of surface_waterflux
[581]	58	! 580 2010-10-05 13:59:11Z heinze
[601]	59	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	60	!
[568]	61	! 567 2010-10-01 10:46:30Z helmke
	62	! calculating masks changed
	63	!
[565]	64	! 564 2010-09-30 13:18:59Z helmke
	65	! palm message identifiers of masked output changed, 20 replaced by max_masks
	66	!
[554]	67	! 553 2010-09-01 14:09:06Z weinreis
	68	! masks is calculated and removed from inipar
[532]	69	!
	70	! 531 2010-04-21 06:47:21Z heinze
	71	! Bugfix: unit of hyp changed to dbar
[392]	72	!
[525]	73	! 524 2010-03-30 02:04:51Z raasch
	74	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	75	!
[494]	76	! 493 2010-03-01 08:30:24Z raasch
	77	! netcdf_data_format is checked
	78	!
[449]	79	! 411 2009-12-11 14:15:58Z heinze
	80	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	81	! Initialization of large scale vertical motion (subsidence/ascent)
	82	!
	83	! 410 2009-12-04 17:05:40Z letzel
	84	! masked data output
	85	!
[392]	86	! 388 2009-09-23 09:40:33Z raasch
[388]	87	! Check profiles fpr prho and hyp.
[376]	88	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	89	! interval has been set, respective error message is included
[366]	90	! bc_lr_cyc and bc_ns_cyc are set,
[328]	91	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	92	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	93	! Coupling with independent precursor runs.
[264]	94	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	95	! Bugfix: pressure included for profile output
[240]	96	! Check pressure gradient conditions
[256]	97	! topography_grid_convention moved from user_check_parameters
	98	! 'single_street_canyon'
[367]	99	! Added shf* and qsws* to the list of available output data
[226]	100	!
	101	! 222 2009-01-12 16:04:16Z letzel
[217]	102	! +user_check_parameters
[213]	103	! Output of messages replaced by message handling routine.
[206]	104	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	105	! deleted __mpi2 directives
[222]	106	! Check that PALM is called with mrun -K parallel for coupling
[198]	107	!
	108	! 197 2008-09-16 15:29:03Z raasch
[177]	109	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	110	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	111	!
	112	! Strict grid matching along z is not needed for mg-solver.
[153]	113	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	114	! Case of reading data for recycling included in initializing_actions,
[197]	115	! check of turbulent_inflow and calculation of recycling_plane.
	116	! q*2 profile added
[139]	117	!
	118	! 138 2007-11-28 10:03:58Z letzel
[138]	119	! Plant canopy added
[132]	120	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	121	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	122	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	123	!
	124	! 109 2007-08-28 15:26:47Z letzel
[102]	125	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	126	! conditions for temperature and fluxes) in case of coupled runs.
	127	! +profiles for wp and w"e
[104]	128	! Bugfix: Error message concerning output of particle concentration (pc)
	129	! modified
[108]	130	! More checks and more default values for coupled runs
	131	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	132	! cloud_physics = .T.)
	133	! Rayleigh damping for ocean fixed.
[109]	134	! Check and, if necessary, set default value for dt_coupling
[98]	135	!
	136	! 97 2007-06-21 08:23:15Z raasch
[97]	137	! Initial salinity profile is calculated, salinity boundary conditions are
	138	! checked,
[94]	139	! z_max_do1d is checked only in case of ocean = .f.,
[97]	140	! +initial temperature and geostrophic velocity profiles for the ocean version,
	141	! use_pt_reference renamed use_reference
[77]	142	!
[90]	143	! 89 2007-05-25 12:08:31Z raasch
	144	! Check for user-defined profiles
	145	!
[77]	146	! 75 2007-03-22 09:54:05Z raasch
[51]	147	! "by_user" allowed as initializing action, -data_output_ts,
[63]	148	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	149	! and pt_reference are checked, moisture renamed humidity,
[72]	150	! output of precipitation amount/rate and roughnes length + check
[73]	151	! possible negative humidities are avoided in initial profile,
[75]	152	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	153	! revision added to run_description_header
[1]	154	!
[39]	155	! 20 2007-02-26 00:12:32Z raasch
	156	! Temperature and humidity gradients at top are now calculated for nzt+1,
	157	! top_heatflux and respective boundary condition bc_pt_t is checked
	158	!
[3]	159	! RCS Log replace by Id keyword, revision history cleaned up
	160	!
[1]	161	! Revision 1.61 2006/08/04 14:20:25 raasch
	162	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	163	! use_upstream_for_tke, default value for dt_dopts,
	164	! generation of file header moved from routines palm and header to here
	165	!
	166	! Revision 1.1 1997/08/26 06:29:23 raasch
	167	! Initial revision
	168	!
	169	!
	170	! Description:
	171	! ------------
	172	! Check control parameters and deduce further quantities.
	173	!------------------------------------------------------------------------------!
	174
	175	USE arrays_3d
[824]	176	USE cloud_parameters
[1]	177	USE constants
	178	USE control_parameters
[264]	179	USE dvrp_variables
[1]	180	USE grid_variables
	181	USE indices
	182	USE model_1d
	183	USE netcdf_control
	184	USE particle_attributes
	185	USE pegrid
	186	USE profil_parameter
[411]	187	USE subsidence_mod
[1]	188	USE statistics
	189	USE transpose_indices
	190
	191	IMPLICIT NONE
	192
	193	CHARACTER (LEN=1) :: sq
	194	CHARACTER (LEN=6) :: var
	195	CHARACTER (LEN=7) :: unit
	196	CHARACTER (LEN=8) :: date
	197	CHARACTER (LEN=10) :: time
[102]	198	CHARACTER (LEN=40) :: coupling_string
[1]	199	CHARACTER (LEN=100) :: action
	200
[767]	201	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
	202	position, prec
[1]	203	LOGICAL :: found, ldum
[291]	204	REAL :: gradient, maxn, maxp, remote = 0.0, &
	205	simulation_time_since_reference
[1]	206
	207	!
	208	!-- Warning, if host is not set
	209	IF ( host(1:1) == ' ' ) THEN
[213]	210	message_string = '"host" is not set. Please check that environment ' // &
	211	'variable "localhost" & is set before running PALM'
[226]	212	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	213	ENDIF
	214
	215	!
[102]	216	!-- Check the coupling mode
	217	IF ( coupling_mode /= 'uncoupled' .AND. &
	218	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	219	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	220	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	221	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	222	ENDIF
	223
	224	!
[108]	225	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	226	IF ( coupling_mode /= 'uncoupled') THEN
[213]	227
[108]	228	IF ( dt_coupling == 9999999.9 ) THEN
[213]	229	message_string = 'dt_coupling is not set but required for coup' // &
	230	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	231	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	232	ENDIF
[213]	233
[206]	234	#if defined( __parallel )
[807]	235
	236	!
	237	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	238	!-- program.
	239	!-- check_namelist_files will need the following information of the other
	240	!-- model (atmosphere/ocean).
[845]	241	! dt_coupling = remote
	242	! dt_max = remote
	243	! restart_time = remote
	244	! dt_restart= remote
	245	! simulation_time_since_reference = remote
	246	! dx = remote
[807]	247
	248
[809]	249	#if ! defined( __check )
[667]	250	IF ( myid == 0 ) THEN
	251	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	252	ierr )
	253	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	254	status, ierr )
	255	ENDIF
	256	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	257	#endif
[108]	258	IF ( dt_coupling /= remote ) THEN
[213]	259	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	260	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	261	'dt_coupling_remote = ', remote
[226]	262	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	263	ENDIF
[109]	264	IF ( dt_coupling <= 0.0 ) THEN
[809]	265	#if ! defined( __check )
[667]	266	IF ( myid == 0 ) THEN
	267	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	268	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	269	status, ierr )
	270	ENDIF
	271	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	272	#endif
[109]	273	dt_coupling = MAX( dt_max, remote )
[213]	274	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	275	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	276	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	277	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	278	ENDIF
[809]	279	#if ! defined( __check )
[667]	280	IF ( myid == 0 ) THEN
	281	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	282	ierr )
	283	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	284	status, ierr )
	285	ENDIF
	286	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	287	#endif
[108]	288	IF ( restart_time /= remote ) THEN
[213]	289	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	290	'": restart_time = ', restart_time, '& is not equal to ', &
	291	'restart_time_remote = ', remote
[226]	292	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	293	ENDIF
[809]	294	#if ! defined( __check )
[667]	295	IF ( myid == 0 ) THEN
	296	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	297	ierr )
	298	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	299	status, ierr )
	300	ENDIF
	301	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	302	#endif
[108]	303	IF ( dt_restart /= remote ) THEN
[213]	304	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	305	'": dt_restart = ', dt_restart, '& is not equal to ', &
	306	'dt_restart_remote = ', remote
[226]	307	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	308	ENDIF
[213]	309
[291]	310	simulation_time_since_reference = end_time - coupling_start_time
[809]	311	#if ! defined( __check )
[667]	312	IF ( myid == 0 ) THEN
	313	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	314	14, comm_inter, ierr )
	315	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	316	status, ierr )
	317	ENDIF
	318	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	319	#endif
[291]	320	IF ( simulation_time_since_reference /= remote ) THEN
[213]	321	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	322	'": simulation_time_since_reference = ', &
	323	simulation_time_since_reference, '& is not equal to ', &
	324	'simulation_time_since_reference_remote = ', remote
[226]	325	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	326	ENDIF
[213]	327
[809]	328	#if ! defined( __check )
[667]	329	IF ( myid == 0 ) THEN
	330	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	331	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	332	status, ierr )
[108]	333	ENDIF
[667]	334	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	335
[807]	336	#endif
[667]	337	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	338
	339	IF ( dx < remote ) THEN
	340	WRITE( message_string, * ) 'coupling mode "', &
	341	TRIM( coupling_mode ), &
	342	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	343	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	344	ENDIF
	345
	346	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	347	WRITE( message_string, * ) 'coupling mode "', &
	348	TRIM( coupling_mode ), &
	349	'": Domain size in x-direction is not equal in ocean and atmosphere'
	350	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	351	ENDIF
	352
[108]	353	ENDIF
[213]	354
[809]	355	#if ! defined( __check )
[667]	356	IF ( myid == 0) THEN
	357	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	358	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	359	status, ierr )
[108]	360	ENDIF
[667]	361	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	362	#endif
[667]	363	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	364
	365	IF ( dy < remote ) THEN
	366	WRITE( message_string, * ) 'coupling mode "', &
	367	TRIM( coupling_mode ), &
	368	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	369	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	370	ENDIF
	371
	372	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	373	WRITE( message_string, * ) 'coupling mode "', &
	374	TRIM( coupling_mode ), &
	375	'": Domain size in y-direction is not equal in ocean and atmosphere'
	376	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	377	ENDIF
	378
	379	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	380	WRITE( message_string, * ) 'coupling mode "', &
	381	TRIM( coupling_mode ), &
	382	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	383	' atmosphere'
	384	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	385	ENDIF
	386
	387	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	388	WRITE( message_string, * ) 'coupling mode "', &
	389	TRIM( coupling_mode ), &
	390	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	391	' atmosphere'
	392	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	393	ENDIF
	394
[108]	395	ENDIF
[222]	396	#else
	397	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	398	' ''mrun -K parallel'''
[226]	399	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	400	#endif
	401	ENDIF
	402
[809]	403	#if defined( __parallel ) && ! defined ( __check )
[108]	404	!
	405	!-- Exchange via intercommunicator
[667]	406	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	407	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	408	ierr )
[667]	409	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	410	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	411	comm_inter, status, ierr )
[108]	412	ENDIF
[667]	413	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	414
[108]	415	#endif
	416
	417
	418	!
[1]	419	!-- Generate the file header which is used as a header for most of PALM's
	420	!-- output files
	421	CALL DATE_AND_TIME( date, time )
	422	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	423	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	424	IF ( coupling_mode == 'uncoupled' ) THEN
	425	coupling_string = ''
	426	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	427	coupling_string = ' coupled (atmosphere)'
	428	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	429	coupling_string = ' coupled (ocean)'
	430	ENDIF
[1]	431
[102]	432	WRITE ( run_description_header, &
	433	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	434	TRIM( version ), TRIM( revision ), 'run: ', &
	435	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	436	'host: ', TRIM( host ), run_date, run_time
[1]	437
	438	!
[63]	439	!-- Check the general loop optimization method
	440	IF ( loop_optimization == 'default' ) THEN
	441	IF ( host(1:3) == 'nec' ) THEN
	442	loop_optimization = 'vector'
	443	ELSE
	444	loop_optimization = 'cache'
	445	ENDIF
	446	ENDIF
	447	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	448	.AND. loop_optimization /= 'vector' ) THEN
[213]	449	message_string = 'illegal value given for loop_optimization: "' // &
	450	TRIM( loop_optimization ) // '"'
[226]	451	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	452	ENDIF
	453
	454	!
[1]	455	!-- Check topography setting (check for illegal parameter combinations)
	456	IF ( topography /= 'flat' ) THEN
	457	action = ' '
	458	IF ( scalar_advec /= 'pw-scheme' ) THEN
	459	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	460	ENDIF
	461	IF ( momentum_advec /= 'pw-scheme' ) THEN
	462	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	463	ENDIF
[51]	464	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	465	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	466	ENDIF
[114]	467	IF ( psolver == 'sor' ) THEN
[1]	468	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	469	ENDIF
	470	IF ( sloping_surface ) THEN
	471	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	472	ENDIF
	473	IF ( galilei_transformation ) THEN
	474	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	475	ENDIF
	476	IF ( cloud_physics ) THEN
	477	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	478	ENDIF
	479	IF ( cloud_droplets ) THEN
	480	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	481	ENDIF
	482	IF ( .NOT. prandtl_layer ) THEN
	483	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	484	ENDIF
	485	IF ( action /= ' ' ) THEN
[213]	486	message_string = 'a non-flat topography does not allow ' // &
	487	TRIM( action )
[226]	488	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	489	ENDIF
[667]	490	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	491	THEN
	492	message_string = 'topography is still not allowed with ' // &
	493	'momentum_advec = "' // TRIM( momentum_advec ) // &
	494	'"or scalar_advec = "' // TRIM( scalar_advec ) //'"'
	495	! message number still needs modification
	496	CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 )
	497	END IF
	498
[256]	499	!
	500	!-- In case of non-flat topography, check whether the convention how to
	501	!-- define the topography grid has been set correctly, or whether the default
	502	!-- is applicable. If this is not possible, abort.
	503	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	504	IF ( TRIM( topography ) /= 'single_building' .AND. &
	505	TRIM( topography ) /= 'single_street_canyon' .AND. &
	506	TRIM( topography ) /= 'read_from_file' ) THEN
	507	!-- The default value is not applicable here, because it is only valid
	508	!-- for the two standard cases 'single_building' and 'read_from_file'
	509	!-- defined in init_grid.
	510	WRITE( message_string, * ) &
	511	'The value for "topography_grid_convention" ', &
	512	'is not set. Its default value is & only valid for ', &
	513	'"topography" = ''single_building'', ', &
	514	'''single_street_canyon'' & or ''read_from_file''.', &
	515	' & Choose ''cell_edge'' or ''cell_center''.'
	516	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	517	ELSE
	518	!-- The default value is applicable here.
	519	!-- Set convention according to topography.
	520	IF ( TRIM( topography ) == 'single_building' .OR. &
	521	TRIM( topography ) == 'single_street_canyon' ) THEN
	522	topography_grid_convention = 'cell_edge'
	523	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	524	topography_grid_convention = 'cell_center'
	525	ENDIF
	526	ENDIF
	527	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	528	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	529	WRITE( message_string, * ) &
	530	'The value for "topography_grid_convention" is ', &
	531	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	532	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	533	ENDIF
	534
[1]	535	ENDIF
[94]	536
[1]	537	!
[94]	538	!-- Check ocean setting
	539	IF ( ocean ) THEN
[332]	540
[94]	541	action = ' '
	542	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	543	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	544	ENDIF
[97]	545	IF ( momentum_advec == 'ups-scheme' ) THEN
	546	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	547	ENDIF
[94]	548	IF ( action /= ' ' ) THEN
[213]	549	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	550	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	551	ENDIF
	552
[332]	553	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	554	TRIM( coupling_char ) == '_O' ) THEN
[343]	555
[94]	556	!
[332]	557	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	558	!-- ocean run (this setting is done via mrun-option -y)
[343]	559
[291]	560	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	561	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	562	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	563
[291]	564	ENDIF
	565
	566	!
[1]	567	!-- Check whether there are any illegal values
	568	!-- Pressure solver:
	569	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	570	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	571	message_string = 'unknown solver for perturbation pressure: psolver' // &
	572	' = "' // TRIM( psolver ) // '"'
[226]	573	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	574	ENDIF
	575
	576	#if defined( __parallel )
	577	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	578	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	579	'for a 1d domain-decomposition along x & please do' // &
	580	' not set npey/=1 in the parameter file'
[226]	581	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	582	ENDIF
[181]	583	IF ( psolver == 'poisfft_hybrid' .AND. &
	584	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	585	psolver == 'multigrid' .AND. &
	586	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	587	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	588	'work for subdomains with unequal size & please ' // &
	589	'set grid_matching = ''strict'' in the parameter file'
[226]	590	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	591	ENDIF
	592	#else
	593	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	594	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	595	' for a parallel environment'
[226]	596	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	597	ENDIF
	598	#endif
	599
	600	IF ( psolver == 'multigrid' ) THEN
	601	IF ( cycle_mg == 'w' ) THEN
	602	gamma_mg = 2
	603	ELSEIF ( cycle_mg == 'v' ) THEN
	604	gamma_mg = 1
	605	ELSE
[213]	606	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	607	TRIM( cycle_mg ) // '"'
[226]	608	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	609	ENDIF
	610	ENDIF
	611
	612	IF ( fft_method /= 'singleton-algorithm' .AND. &
	613	fft_method /= 'temperton-algorithm' .AND. &
	614	fft_method /= 'system-specific' ) THEN
[213]	615	message_string = 'unknown fft-algorithm: fft_method = "' // &
	616	TRIM( fft_method ) // '"'
[226]	617	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	618	ENDIF
[667]	619
	620	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	621	.NOT. call_psolver_at_all_substeps ) THEN
[667]	622	message_string = 'psolver must be called at each RK3 substep when "'//&
	623	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	624	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	625	END IF
[1]	626	!
	627	!-- Advection schemes:
[673]	628	!
	629	!-- Set the LOGICALS to enhance the performance.
	630	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	631	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	632
[667]	633	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
	634	momentum_advec /= 'ups-scheme' ) THEN
[214]	635	message_string = 'unknown advection scheme: momentum_advec = "' // &
	636	TRIM( momentum_advec ) // '"'
[226]	637	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	638	ENDIF
[667]	639	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	640	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
	641	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
	642	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
	643	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
	644	message_string = 'momentum_advec or scalar_advec = "' &
	645	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	646	TRIM( timestep_scheme ) // '"'
[226]	647	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	648	ENDIF
[667]	649	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
	650	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
[214]	651	message_string = 'unknown advection scheme: scalar_advec = "' // &
	652	TRIM( scalar_advec ) // '"'
[226]	653	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	654	ENDIF
	655
	656	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	657	use_upstream_for_tke = .TRUE.
[214]	658	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	659	'use_sgs_for_particles = .TRUE.'
[226]	660	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	661	ENDIF
	662
	663	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	664	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	665	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	666	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	667	ENDIF
	668
[824]	669	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	670	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	671	'curvature_solution_effects = .TRUE.'
	672	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	673	ENDIF
	674
[1]	675	!
	676	!-- Timestep schemes:
	677	SELECT CASE ( TRIM( timestep_scheme ) )
	678
	679	CASE ( 'euler' )
	680	intermediate_timestep_count_max = 1
	681	asselin_filter_factor = 0.0
	682
	683	CASE ( 'leapfrog', 'leapfrog+euler' )
	684	intermediate_timestep_count_max = 1
	685
	686	CASE ( 'runge-kutta-2' )
	687	intermediate_timestep_count_max = 2
	688	asselin_filter_factor = 0.0
	689
	690	CASE ( 'runge-kutta-3' )
	691	intermediate_timestep_count_max = 3
	692	asselin_filter_factor = 0.0
	693
	694	CASE DEFAULT
[214]	695	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	696	TRIM( timestep_scheme ) // '"'
[226]	697	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	698
	699	END SELECT
	700
[63]	701	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	702	THEN
[214]	703	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	704	'" & does not work with timestep_scheme "' // &
	705	TRIM( timestep_scheme ) // '"'
[226]	706	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	707	ENDIF
	708
[667]	709	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	710	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	711	message_string = 'momentum advection scheme "' // &
	712	TRIM( momentum_advec ) // '" & does not work with ' // &
	713	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	714	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	715	ENDIF
	716
[825]	717	!
	718	!-- Collision kernels:
	719	SELECT CASE ( TRIM( collision_kernel ) )
	720
[828]	721	CASE ( 'hall', 'hall_fast' )
[825]	722	hall_kernel = .TRUE.
	723
	724	CASE ( 'palm' )
	725	palm_kernel = .TRUE.
	726
[828]	727	CASE ( 'wang', 'wang_fast' )
[825]	728	wang_kernel = .TRUE.
	729
	730	CASE ( 'none' )
	731
	732
	733	CASE DEFAULT
	734	message_string = 'unknown collision kernel: collision_kernel = "' // &
	735	TRIM( collision_kernel ) // '"'
	736	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	737
	738	END SELECT
[828]	739	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	740
	741
[147]	742	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	743	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	744	!
[214]	745	!-- No restart run: several initialising actions are possible
[1]	746	action = initializing_actions
	747	DO WHILE ( TRIM( action ) /= '' )
	748	position = INDEX( action, ' ' )
	749	SELECT CASE ( action(1:position-1) )
	750
	751	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	752	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	753	action = action(position+1:)
	754
	755	CASE DEFAULT
[214]	756	message_string = 'initializing_action = "' // &
	757	TRIM( action ) // '" unkown or not allowed'
[226]	758	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	759
	760	END SELECT
	761	ENDDO
	762	ENDIF
[214]	763
[680]	764	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	765	conserve_volume_flow ) THEN
	766	message_string = 'initializing_actions = "initialize_vortex"' // &
	767	' ist not allowed with conserve_volume_flow = .T.'
	768	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	769	ENDIF
	770
	771
[1]	772	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	773	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	774	message_string = 'initializing_actions = "set_constant_profiles"' // &
	775	' and "set_1d-model_profiles" are not allowed ' // &
	776	'simultaneously'
[226]	777	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	778	ENDIF
[214]	779
[46]	780	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	781	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	782	message_string = 'initializing_actions = "set_constant_profiles"' // &
	783	' and "by_user" are not allowed simultaneously'
[226]	784	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	785	ENDIF
[214]	786
[46]	787	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	788	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	789	message_string = 'initializing_actions = "by_user" and ' // &
	790	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	791	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	792	ENDIF
[1]	793
[75]	794	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	795	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	796	'not allowed with humidity = ', humidity
[226]	797	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	798	ENDIF
	799
[72]	800	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	801	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	802	'not allowed with cloud_physics = ', cloud_physics
[226]	803	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	804	ENDIF
	805
[75]	806	IF ( humidity .AND. sloping_surface ) THEN
[214]	807	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	808	'are not allowed simultaneously'
[226]	809	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	810	ENDIF
	811
[75]	812	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	813	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	814	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	815	ENDIF
	816
[75]	817	IF ( passive_scalar .AND. humidity ) THEN
[214]	818	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	819	'is not allowed simultaneously'
[226]	820	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	821	ENDIF
	822
	823	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	824	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	825	' = .TRUE.'
[226]	826	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	827	ENDIF
	828
	829	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	830	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	831	'" found for parameter grid_matching'
[226]	832	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	833	ENDIF
	834
[138]	835	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	836	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	837	'coefficient & given value is drag_coefficient = 0.0'
[226]	838	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	839	ENDIF
	840
[1]	841	!
	842	!-- In case of no model continuation run, check initialising parameters and
	843	!-- deduce further quantities
	844	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	845
	846	!
[767]	847	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	848	pt_init = pt_surface
[94]	849	IF ( humidity ) q_init = q_surface
	850	IF ( ocean ) sa_init = sa_surface
	851	IF ( passive_scalar ) q_init = s_surface
[138]	852	IF ( plant_canopy ) lad = 0.0
[1]	853
	854	!
	855	!--
	856	!-- If required, compute initial profile of the geostrophic wind
	857	!-- (component ug)
	858	i = 1
	859	gradient = 0.0
[97]	860
	861	IF ( .NOT. ocean ) THEN
	862
	863	ug_vertical_gradient_level_ind(1) = 0
	864	ug(0) = ug_surface
	865	DO k = 1, nzt+1
[177]	866	IF ( i < 11 ) THEN
	867	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	868	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	869	gradient = ug_vertical_gradient(i) / 100.0
	870	ug_vertical_gradient_level_ind(i) = k - 1
	871	i = i + 1
[1]	872	ENDIF
[177]	873	ENDIF
[97]	874	IF ( gradient /= 0.0 ) THEN
	875	IF ( k /= 1 ) THEN
	876	ug(k) = ug(k-1) + dzu(k) * gradient
	877	ELSE
	878	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	879	ENDIF
[1]	880	ELSE
[97]	881	ug(k) = ug(k-1)
[1]	882	ENDIF
[97]	883	ENDDO
[1]	884
[97]	885	ELSE
	886
	887	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	888	ug(nzt+1) = ug_surface
[667]	889	DO k = nzt, nzb, -1
[177]	890	IF ( i < 11 ) THEN
	891	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	892	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	893	gradient = ug_vertical_gradient(i) / 100.0
	894	ug_vertical_gradient_level_ind(i) = k + 1
	895	i = i + 1
[97]	896	ENDIF
	897	ENDIF
	898	IF ( gradient /= 0.0 ) THEN
	899	IF ( k /= nzt ) THEN
	900	ug(k) = ug(k+1) - dzu(k+1) * gradient
	901	ELSE
	902	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	903	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	904	ENDIF
	905	ELSE
	906	ug(k) = ug(k+1)
	907	ENDIF
	908	ENDDO
	909
	910	ENDIF
	911
[1]	912	!
[767]	913	!-- In case of no given gradients for ug, choose a zero gradient
[97]	914	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	915	ug_vertical_gradient_level(1) = 0.0
	916	ENDIF
	917
	918	!
	919	!--
	920	!-- If required, compute initial profile of the geostrophic wind
	921	!-- (component vg)
	922	i = 1
	923	gradient = 0.0
[97]	924
	925	IF ( .NOT. ocean ) THEN
	926
	927	vg_vertical_gradient_level_ind(1) = 0
	928	vg(0) = vg_surface
	929	DO k = 1, nzt+1
[177]	930	IF ( i < 11 ) THEN
	931	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	932	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	933	gradient = vg_vertical_gradient(i) / 100.0
	934	vg_vertical_gradient_level_ind(i) = k - 1
	935	i = i + 1
[1]	936	ENDIF
	937	ENDIF
[97]	938	IF ( gradient /= 0.0 ) THEN
	939	IF ( k /= 1 ) THEN
	940	vg(k) = vg(k-1) + dzu(k) * gradient
	941	ELSE
	942	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	943	ENDIF
[1]	944	ELSE
[97]	945	vg(k) = vg(k-1)
[1]	946	ENDIF
[97]	947	ENDDO
[1]	948
[97]	949	ELSE
	950
[121]	951	vg_vertical_gradient_level_ind(1) = nzt+1
	952	vg(nzt+1) = vg_surface
[667]	953	DO k = nzt, nzb, -1
[177]	954	IF ( i < 11 ) THEN
	955	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	956	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	957	gradient = vg_vertical_gradient(i) / 100.0
	958	vg_vertical_gradient_level_ind(i) = k + 1
	959	i = i + 1
[97]	960	ENDIF
	961	ENDIF
	962	IF ( gradient /= 0.0 ) THEN
	963	IF ( k /= nzt ) THEN
	964	vg(k) = vg(k+1) - dzu(k+1) * gradient
	965	ELSE
	966	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	967	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	968	ENDIF
	969	ELSE
	970	vg(k) = vg(k+1)
	971	ENDIF
	972	ENDDO
	973
	974	ENDIF
	975
[1]	976	!
[767]	977	!-- In case of no given gradients for vg, choose a zero gradient
[97]	978	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	979	vg_vertical_gradient_level(1) = 0.0
	980	ENDIF
	981
	982	!
[767]	983	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	984	!-- interpolate them from wind profile data (if given)
	985	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	986
	987	u_init = ug
	988	v_init = vg
	989
	990	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	991
	992	IF ( uv_heights(1) /= 0.0 ) THEN
	993	message_string = 'uv_heights(1) must be 0.0'
	994	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	995	ENDIF
	996
	997	use_prescribed_profile_data = .TRUE.
	998
	999	kk = 1
	1000	u_init(0) = 0.0
	1001	v_init(0) = 0.0
	1002
	1003	DO k = 1, nz+1
	1004
	1005	IF ( kk < 100 ) THEN
	1006	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	1007	kk = kk + 1
	1008	IF ( kk == 100 ) EXIT
	1009	ENDDO
	1010	ENDIF
	1011
[774]	1012	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1013	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1014	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1015	( u_profile(kk+1) - u_profile(kk) )
	1016	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1017	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1018	( v_profile(kk+1) - v_profile(kk) )
	1019	ELSE
	1020	u_init(k) = u_profile(kk)
	1021	v_init(k) = v_profile(kk)
	1022	ENDIF
	1023
	1024	ENDDO
	1025
	1026	ELSE
	1027
	1028	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1029	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1030
	1031	ENDIF
	1032
	1033	!
[94]	1034	!-- Compute initial temperature profile using the given temperature gradients
[1]	1035	i = 1
	1036	gradient = 0.0
[94]	1037
	1038	IF ( .NOT. ocean ) THEN
	1039
	1040	pt_vertical_gradient_level_ind(1) = 0
	1041	DO k = 1, nzt+1
[177]	1042	IF ( i < 11 ) THEN
	1043	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1044	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1045	gradient = pt_vertical_gradient(i) / 100.0
	1046	pt_vertical_gradient_level_ind(i) = k - 1
	1047	i = i + 1
[1]	1048	ENDIF
	1049	ENDIF
[94]	1050	IF ( gradient /= 0.0 ) THEN
	1051	IF ( k /= 1 ) THEN
	1052	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1053	ELSE
	1054	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	1055	ENDIF
[1]	1056	ELSE
[94]	1057	pt_init(k) = pt_init(k-1)
[1]	1058	ENDIF
[94]	1059	ENDDO
[1]	1060
[94]	1061	ELSE
	1062
	1063	pt_vertical_gradient_level_ind(1) = nzt+1
	1064	DO k = nzt, 0, -1
[177]	1065	IF ( i < 11 ) THEN
	1066	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1067	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1068	gradient = pt_vertical_gradient(i) / 100.0
	1069	pt_vertical_gradient_level_ind(i) = k + 1
	1070	i = i + 1
[94]	1071	ENDIF
	1072	ENDIF
	1073	IF ( gradient /= 0.0 ) THEN
	1074	IF ( k /= nzt ) THEN
	1075	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1076	ELSE
	1077	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1078	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1079	ENDIF
	1080	ELSE
	1081	pt_init(k) = pt_init(k+1)
	1082	ENDIF
	1083	ENDDO
	1084
	1085	ENDIF
	1086
[1]	1087	!
	1088	!-- In case of no given temperature gradients, choose gradient of neutral
	1089	!-- stratification
[94]	1090	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1091	pt_vertical_gradient_level(1) = 0.0
	1092	ENDIF
	1093
	1094	!
[94]	1095	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1096	!-- boundary condition
[19]	1097	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1098
	1099	!
	1100	!-- If required, compute initial humidity or scalar profile using the given
	1101	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1102	!-- values of the scalar parameters on humidity parameters
	1103	IF ( passive_scalar ) THEN
	1104	bc_q_b = bc_s_b
	1105	bc_q_t = bc_s_t
	1106	q_surface = s_surface
	1107	q_surface_initial_change = s_surface_initial_change
	1108	q_vertical_gradient = s_vertical_gradient
	1109	q_vertical_gradient_level = s_vertical_gradient_level
	1110	surface_waterflux = surface_scalarflux
[407]	1111	wall_humidityflux = wall_scalarflux
[1]	1112	ENDIF
	1113
[75]	1114	IF ( humidity .OR. passive_scalar ) THEN
[1]	1115
	1116	i = 1
	1117	gradient = 0.0
	1118	q_vertical_gradient_level_ind(1) = 0
	1119	DO k = 1, nzt+1
[177]	1120	IF ( i < 11 ) THEN
	1121	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1122	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1123	gradient = q_vertical_gradient(i) / 100.0
	1124	q_vertical_gradient_level_ind(i) = k - 1
	1125	i = i + 1
[1]	1126	ENDIF
	1127	ENDIF
	1128	IF ( gradient /= 0.0 ) THEN
	1129	IF ( k /= 1 ) THEN
	1130	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1131	ELSE
	1132	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1133	ENDIF
	1134	ELSE
	1135	q_init(k) = q_init(k-1)
	1136	ENDIF
[72]	1137	!
	1138	!-- Avoid negative humidities
	1139	IF ( q_init(k) < 0.0 ) THEN
	1140	q_init(k) = 0.0
	1141	ENDIF
[1]	1142	ENDDO
	1143
	1144	!
	1145	!-- In case of no given humidity gradients, choose zero gradient
	1146	!-- conditions
	1147	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1148	q_vertical_gradient_level(1) = 0.0
	1149	ENDIF
	1150
	1151	!
	1152	!-- Store humidity gradient at the top boundary for possile Neumann
	1153	!-- boundary condition
[19]	1154	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1155
	1156	ENDIF
	1157
[94]	1158	!
	1159	!-- If required, compute initial salinity profile using the given salinity
	1160	!-- gradients
	1161	IF ( ocean ) THEN
	1162
	1163	i = 1
	1164	gradient = 0.0
	1165
	1166	sa_vertical_gradient_level_ind(1) = nzt+1
	1167	DO k = nzt, 0, -1
[177]	1168	IF ( i < 11 ) THEN
	1169	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1170	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1171	gradient = sa_vertical_gradient(i) / 100.0
	1172	sa_vertical_gradient_level_ind(i) = k + 1
	1173	i = i + 1
[94]	1174	ENDIF
	1175	ENDIF
	1176	IF ( gradient /= 0.0 ) THEN
	1177	IF ( k /= nzt ) THEN
	1178	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1179	ELSE
	1180	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1181	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1182	ENDIF
	1183	ELSE
	1184	sa_init(k) = sa_init(k+1)
	1185	ENDIF
	1186	ENDDO
	1187
	1188	ENDIF
	1189
[138]	1190	!
[388]	1191	!-- If required compute the profile of leaf area density used in the plant
	1192	!-- canopy model
[138]	1193	IF ( plant_canopy ) THEN
	1194
	1195	i = 1
	1196	gradient = 0.0
[1]	1197
[138]	1198	IF ( .NOT. ocean ) THEN
[153]	1199
	1200	lad(0) = lad_surface
[138]	1201
	1202	lad_vertical_gradient_level_ind(1) = 0
	1203	DO k = 1, pch_index
[177]	1204	IF ( i < 11 ) THEN
	1205	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1206	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1207	gradient = lad_vertical_gradient(i)
	1208	lad_vertical_gradient_level_ind(i) = k - 1
	1209	i = i + 1
[138]	1210	ENDIF
	1211	ENDIF
	1212	IF ( gradient /= 0.0 ) THEN
	1213	IF ( k /= 1 ) THEN
	1214	lad(k) = lad(k-1) + dzu(k) * gradient
	1215	ELSE
	1216	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1217	ENDIF
	1218	ELSE
	1219	lad(k) = lad(k-1)
	1220	ENDIF
	1221	ENDDO
	1222
	1223	ENDIF
	1224
[1]	1225	!
[388]	1226	!-- In case of no given leaf area density gradients, choose a vanishing
	1227	!-- gradient
[138]	1228	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1229	lad_vertical_gradient_level(1) = 0.0
	1230	ENDIF
	1231
	1232	ENDIF
	1233
	1234	ENDIF
[411]	1235
	1236	!
	1237	!-- Initialize large scale subsidence if required
[580]	1238	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1239	large_scale_subsidence = .TRUE.
	1240	CALL init_w_subsidence
	1241	END IF
	1242
[138]	1243
[667]	1244
[138]	1245	!
[1]	1246	!-- Compute Coriolis parameter
	1247	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1248	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1249
	1250	!
[97]	1251	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1252	!-- set the reference temperature equal to the surface temperature.
	1253	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1254
	1255	!
[97]	1256	!-- Reference value has to be used in buoyancy terms
	1257	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1258
	1259	!
	1260	!-- Sign of buoyancy/stability terms
	1261	IF ( ocean ) atmos_ocean_sign = -1.0
	1262
	1263	!
[108]	1264	!-- Ocean version must use flux boundary conditions at the top
	1265	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1266	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1267	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1268	ENDIF
[97]	1269
	1270	!
[1]	1271	!-- In case of a given slope, compute the relevant quantities
	1272	IF ( alpha_surface /= 0.0 ) THEN
	1273	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1274	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1275	' ) must be < 90.0'
[226]	1276	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1277	ENDIF
	1278	sloping_surface = .TRUE.
	1279	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1280	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1281	ENDIF
	1282
	1283	!
	1284	!-- Check time step and cfl_factor
	1285	IF ( dt /= -1.0 ) THEN
	1286	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1287	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1288	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1289	ENDIF
	1290	dt_3d = dt
	1291	dt_fixed = .TRUE.
	1292	ENDIF
	1293
	1294	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1295	IF ( cfl_factor == -1.0 ) THEN
	1296	IF ( momentum_advec == 'ups-scheme' .OR. &
	1297	scalar_advec == 'ups-scheme' ) THEN
	1298	cfl_factor = 0.8
	1299	ELSE
	1300	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1301	cfl_factor = 0.8
	1302	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1303	cfl_factor = 0.9
	1304	ELSE
	1305	cfl_factor = 0.1
	1306	ENDIF
	1307	ENDIF
	1308	ELSE
[215]	1309	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1310	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1311	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1312	ENDIF
	1313	ENDIF
	1314
	1315	!
	1316	!-- Store simulated time at begin
	1317	simulated_time_at_begin = simulated_time
	1318
	1319	!
[291]	1320	!-- Store reference time for coupled runs and change the coupling flag,
	1321	!-- if ...
	1322	IF ( simulated_time == 0.0 ) THEN
	1323	IF ( coupling_start_time == 0.0 ) THEN
	1324	time_since_reference_point = 0.0
	1325	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1326	run_coupled = .FALSE.
	1327	ENDIF
	1328	ENDIF
	1329
	1330	!
[1]	1331	!-- Set wind speed in the Galilei-transformed system
	1332	IF ( galilei_transformation ) THEN
	1333	IF ( use_ug_for_galilei_tr .AND. &
	1334	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1335	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1336	u_gtrans = ug_surface
	1337	v_gtrans = vg_surface
	1338	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1339	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1340	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1341	' with galilei transformation'
[226]	1342	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1343	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1344	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1345	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1346	' with galilei transformation'
[226]	1347	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1348	ELSE
[215]	1349	message_string = 'variable translation speed used for galilei-' // &
	1350	'transformation, which may cause & instabilities in stably ' // &
	1351	'stratified regions'
[226]	1352	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1353	ENDIF
	1354	ENDIF
	1355
	1356	!
	1357	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1358	!-- fluxes have to be used in the diffusion-terms
	1359	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1360
	1361	!
	1362	!-- Check boundary conditions and set internal variables:
	1363	!-- Lateral boundary conditions
[73]	1364	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1365	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1366	message_string = 'unknown boundary condition: bc_lr = "' // &
	1367	TRIM( bc_lr ) // '"'
[226]	1368	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1369	ENDIF
[73]	1370	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1371	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1372	message_string = 'unknown boundary condition: bc_ns = "' // &
	1373	TRIM( bc_ns ) // '"'
[226]	1374	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1375	ENDIF
	1376
	1377	!
[366]	1378	!-- Internal variables used for speed optimization in if clauses
[707]	1379	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1380	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1381	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1382	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1383	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1384	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1385
	1386	!
[1]	1387	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1388	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1389	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1390	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1391	IF ( psolver /= 'multigrid' ) THEN
[215]	1392	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1393	'psolver = "' // TRIM( psolver ) // '"'
[226]	1394	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1395	ENDIF
[667]	1396	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1397	momentum_advec /= 'ws-scheme') THEN
[215]	1398	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1399	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1400	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1401	ENDIF
[667]	1402	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1403	scalar_advec /= 'ws-scheme' ) THEN
[215]	1404	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1405	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1406	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1407	ENDIF
[667]	1408	IF ( (scalar_advec == 'ws-scheme' .OR. momentum_advec == 'ws-scheme' ) &
	1409	.AND. loop_optimization == 'vector' ) THEN
	1410	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1411	'loop_optimization = vector and ' // &
	1412	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
	1413	! The error message number still needs modification.
	1414	CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 )
	1415	END IF
[1]	1416	IF ( galilei_transformation ) THEN
[215]	1417	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1418	'galilei_transformation = .T.'
[226]	1419	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1420	ENDIF
	1421	ENDIF
	1422
	1423	!
	1424	!-- Bottom boundary condition for the turbulent Kinetic energy
	1425	IF ( bc_e_b == 'neumann' ) THEN
	1426	ibc_e_b = 1
	1427	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1428	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1429	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1430	ENDIF
	1431	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1432	ibc_e_b = 2
	1433	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1434	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1435	TRIM( bc_e_b ) // '"'
[226]	1436	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1437	ENDIF
	1438	IF ( .NOT. prandtl_layer ) THEN
	1439	bc_e_b = 'neumann'
	1440	ibc_e_b = 1
[215]	1441	message_string = 'boundary condition bc_e_b changed to "' // &
	1442	TRIM( bc_e_b ) // '"'
[226]	1443	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1444	ENDIF
	1445	ELSE
[215]	1446	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1447	TRIM( bc_e_b ) // '"'
[226]	1448	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1449	ENDIF
	1450
	1451	!
	1452	!-- Boundary conditions for perturbation pressure
	1453	IF ( bc_p_b == 'dirichlet' ) THEN
	1454	ibc_p_b = 0
	1455	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1456	ibc_p_b = 1
	1457	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1458	ibc_p_b = 2
	1459	ELSE
[215]	1460	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1461	TRIM( bc_p_b ) // '"'
[226]	1462	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1463	ENDIF
	1464	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1465	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1466	'" not allowed with prandtl_layer = .FALSE.'
[226]	1467	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1468	ENDIF
	1469	IF ( bc_p_t == 'dirichlet' ) THEN
	1470	ibc_p_t = 0
	1471	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1472	ibc_p_t = 1
	1473	ELSE
[215]	1474	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1475	TRIM( bc_p_t ) // '"'
[226]	1476	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1477	ENDIF
	1478
	1479	!
	1480	!-- Boundary conditions for potential temperature
[102]	1481	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1482	ibc_pt_b = 2
[1]	1483	ELSE
[102]	1484	IF ( bc_pt_b == 'dirichlet' ) THEN
	1485	ibc_pt_b = 0
	1486	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1487	ibc_pt_b = 1
	1488	ELSE
[215]	1489	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1490	TRIM( bc_pt_b ) // '"'
[226]	1491	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1492	ENDIF
	1493	ENDIF
[102]	1494
[1]	1495	IF ( bc_pt_t == 'dirichlet' ) THEN
	1496	ibc_pt_t = 0
	1497	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1498	ibc_pt_t = 1
[19]	1499	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1500	ibc_pt_t = 2
[1]	1501	ELSE
[215]	1502	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1503	TRIM( bc_pt_t ) // '"'
[226]	1504	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1505	ENDIF
	1506
[20]	1507	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1508	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1509	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1510	top_momentumflux_v /= 9999999.9 ) THEN
	1511	constant_top_momentumflux = .TRUE.
	1512	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1513	top_momentumflux_v == 9999999.9 ) ) THEN
	1514	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1515	'must be set'
[226]	1516	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1517	ENDIF
[1]	1518
	1519	!
	1520	!-- A given surface temperature implies Dirichlet boundary condition for
	1521	!-- temperature. In this case specification of a constant heat flux is
	1522	!-- forbidden.
	1523	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1524	surface_heatflux /= 0.0 ) THEN
[215]	1525	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1526	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1527	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1528	ENDIF
	1529	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1530	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1531	'wed with pt_surface_initial_change (/=0) = ', &
	1532	pt_surface_initial_change
[226]	1533	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1534	ENDIF
	1535
	1536	!
[19]	1537	!-- A given temperature at the top implies Dirichlet boundary condition for
	1538	!-- temperature. In this case specification of a constant heat flux is
	1539	!-- forbidden.
	1540	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1541	top_heatflux /= 0.0 ) THEN
[215]	1542	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1543	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1544	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1545	ENDIF
	1546
	1547	!
[95]	1548	!-- Boundary conditions for salinity
	1549	IF ( ocean ) THEN
	1550	IF ( bc_sa_t == 'dirichlet' ) THEN
	1551	ibc_sa_t = 0
	1552	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1553	ibc_sa_t = 1
	1554	ELSE
[215]	1555	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1556	TRIM( bc_sa_t ) // '"'
[226]	1557	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1558	ENDIF
	1559
	1560	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1561	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1562	message_string = 'boundary condition: bc_sa_t = "' // &
	1563	TRIM( bc_sa_t ) // '" requires to set ' // &
	1564	'top_salinityflux'
[226]	1565	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1566	ENDIF
[95]	1567
	1568	!
	1569	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1570	!-- salinity. In this case specification of a constant salinity flux is
	1571	!-- forbidden.
	1572	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1573	top_salinityflux /= 0.0 ) THEN
[215]	1574	message_string = 'boundary condition: bc_sa_t = "' // &
	1575	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1576	'constant_top_salinityflux = .TRUE.'
[226]	1577	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1578	ENDIF
	1579
	1580	ENDIF
	1581
	1582	!
[75]	1583	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1584	!-- water content / scalar
[75]	1585	IF ( humidity .OR. passive_scalar ) THEN
	1586	IF ( humidity ) THEN
[1]	1587	sq = 'q'
	1588	ELSE
	1589	sq = 's'
	1590	ENDIF
	1591	IF ( bc_q_b == 'dirichlet' ) THEN
	1592	ibc_q_b = 0
	1593	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1594	ibc_q_b = 1
	1595	ELSE
[215]	1596	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1597	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1598	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1599	ENDIF
	1600	IF ( bc_q_t == 'dirichlet' ) THEN
	1601	ibc_q_t = 0
	1602	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1603	ibc_q_t = 1
	1604	ELSE
[215]	1605	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1606	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1607	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1608	ENDIF
	1609
[600]	1610	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1611
	1612	!
	1613	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1614	!-- humidity. In this case specification of a constant water flux is
[1]	1615	!-- forbidden.
	1616	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1617	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1618	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1619	'th prescribed surface flux'
[226]	1620	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1621	ENDIF
	1622	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1623	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1624	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1625	q_surface_initial_change
[226]	1626	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1627	ENDIF
	1628
	1629	ENDIF
	1630
	1631	!
	1632	!-- Boundary conditions for horizontal components of wind speed
	1633	IF ( bc_uv_b == 'dirichlet' ) THEN
	1634	ibc_uv_b = 0
	1635	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1636	ibc_uv_b = 1
	1637	IF ( prandtl_layer ) THEN
[215]	1638	message_string = 'boundary condition: bc_uv_b = "' // &
	1639	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1640	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1641	ENDIF
	1642	ELSE
[215]	1643	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1644	TRIM( bc_uv_b ) // '"'
[226]	1645	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1646	ENDIF
[667]	1647	!
	1648	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1649	!-- assigned with the u and v values of the ocean surface
	1650	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1651	ibc_uv_b = 2
	1652	ENDIF
[215]	1653
[108]	1654	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1655	bc_uv_t = 'neumann'
[1]	1656	ibc_uv_t = 1
	1657	ELSE
[132]	1658	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1659	ibc_uv_t = 0
[767]	1660	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1661	!
	1662	!-- Velocities for the initial u,v-profiles are set zero at the top
	1663	!-- in case of dirichlet_0 conditions
	1664	u_init(nzt+1) = 0.0
	1665	v_init(nzt+1) = 0.0
	1666	ENDIF
[108]	1667	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1668	ibc_uv_t = 1
	1669	ELSE
[215]	1670	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1671	TRIM( bc_uv_t ) // '"'
[226]	1672	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1673	ENDIF
	1674	ENDIF
	1675
	1676	!
	1677	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1678	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1679	IF ( momentum_advec == 'ups-scheme' ) THEN
	1680	rayleigh_damping_factor = 0.01
	1681	ELSE
	1682	rayleigh_damping_factor = 0.0
	1683	ENDIF
	1684	ELSE
	1685	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1686	THEN
[215]	1687	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1688	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1689	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1690	ENDIF
	1691	ENDIF
	1692
	1693	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1694	IF ( .NOT. ocean ) THEN
	1695	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1696	ELSE
	1697	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1698	ENDIF
[1]	1699	ELSE
[108]	1700	IF ( .NOT. ocean ) THEN
	1701	IF ( rayleigh_damping_height < 0.0 .OR. &
	1702	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1703	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1704	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1705	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1706	ENDIF
[108]	1707	ELSE
	1708	IF ( rayleigh_damping_height > 0.0 .OR. &
	1709	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1710	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1711	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1712	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1713	ENDIF
[1]	1714	ENDIF
	1715	ENDIF
	1716
	1717	!
	1718	!-- Check limiters for Upstream-Spline scheme
	1719	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1720	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1721	overshoot_limit_e < 0.0 ) THEN
[215]	1722	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1723	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1724	ENDIF
	1725	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1726	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1727	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1728	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1729	ENDIF
	1730
	1731	!
	1732	!-- Check number of chosen statistic regions. More than 10 regions are not
	1733	!-- allowed, because so far no more than 10 corresponding output files can
	1734	!-- be opened (cf. check_open)
	1735	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1736	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1737	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1738	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1739	ENDIF
	1740	IF ( normalizing_region > statistic_regions .OR. &
	1741	normalizing_region < 0) THEN
[215]	1742	WRITE ( message_string, * ) 'normalizing_region = ', &
	1743	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1744	' (value of statistic_regions)'
[226]	1745	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1746	ENDIF
	1747
	1748	!
[116]	1749	!-- Check the interval for sorting particles.
	1750	!-- Using particles as cloud droplets requires sorting after each timestep.
	1751	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1752	dt_sort_particles = 0.0
[215]	1753	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1754	'_droplets = .TRUE.'
[226]	1755	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1756	ENDIF
	1757
	1758	!
[1]	1759	!-- Set the default intervals for data output, if necessary
	1760	!-- NOTE: dt_dosp has already been set in package_parin
	1761	IF ( dt_data_output /= 9999999.9 ) THEN
	1762	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1763	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1764	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1765	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1766	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1767	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1768	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1769	DO mid = 1, max_masks
[410]	1770	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1771	ENDDO
[1]	1772	ENDIF
	1773
	1774	!
	1775	!-- Set the default skip time intervals for data output, if necessary
	1776	IF ( skip_time_dopr == 9999999.9 ) &
	1777	skip_time_dopr = skip_time_data_output
	1778	IF ( skip_time_dosp == 9999999.9 ) &
	1779	skip_time_dosp = skip_time_data_output
	1780	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1781	skip_time_do2d_xy = skip_time_data_output
	1782	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1783	skip_time_do2d_xz = skip_time_data_output
	1784	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1785	skip_time_do2d_yz = skip_time_data_output
	1786	IF ( skip_time_do3d == 9999999.9 ) &
	1787	skip_time_do3d = skip_time_data_output
	1788	IF ( skip_time_data_output_av == 9999999.9 ) &
	1789	skip_time_data_output_av = skip_time_data_output
[564]	1790	DO mid = 1, max_masks
[410]	1791	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1792	skip_time_domask(mid) = skip_time_data_output
	1793	ENDDO
[1]	1794
	1795	!
	1796	!-- Check the average intervals (first for 3d-data, then for profiles and
	1797	!-- spectra)
	1798	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1799	WRITE( message_string, * ) 'averaging_interval = ', &
	1800	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1801	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1802	ENDIF
	1803
	1804	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1805	averaging_interval_pr = averaging_interval
	1806	ENDIF
	1807
	1808	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1809	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1810	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1811	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1812	ENDIF
	1813
	1814	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1815	averaging_interval_sp = averaging_interval
	1816	ENDIF
	1817
	1818	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1819	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1820	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1821	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1822	ENDIF
	1823
	1824	!
	1825	!-- Set the default interval for profiles entering the temporal average
	1826	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1827	dt_averaging_input_pr = dt_averaging_input
	1828	ENDIF
	1829
	1830	!
	1831	!-- Set the default interval for the output of timeseries to a reasonable
	1832	!-- value (tries to minimize the number of calls of flow_statistics)
	1833	IF ( dt_dots == 9999999.9 ) THEN
	1834	IF ( averaging_interval_pr == 0.0 ) THEN
	1835	dt_dots = MIN( dt_run_control, dt_dopr )
	1836	ELSE
	1837	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1838	ENDIF
	1839	ENDIF
	1840
	1841	!
	1842	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1843	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1844	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1845	dt_averaging_input, ' must be <= averaging_interval = ', &
	1846	averaging_interval
[226]	1847	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1848	ENDIF
	1849
	1850	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1851	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1852	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1853	averaging_interval_pr
[226]	1854	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1855	ENDIF
	1856
	1857	!
[72]	1858	!-- Set the default value for the integration interval of precipitation amount
	1859	IF ( precipitation ) THEN
	1860	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1861	precipitation_amount_interval = dt_do2d_xy
	1862	ELSE
	1863	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1864	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1865	precipitation_amount_interval, ' must not be larger than ', &
	1866	'dt_do2d_xy = ', dt_do2d_xy
[226]	1867	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1868	ENDIF
	1869	ENDIF
	1870	ENDIF
	1871
	1872	!
[1]	1873	!-- Determine the number of output profiles and check whether they are
	1874	!-- permissible
	1875	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1876
	1877	dopr_n = dopr_n + 1
	1878	i = dopr_n
	1879
	1880	!
	1881	!-- Determine internal profile number (for hom, homs)
	1882	!-- and store height levels
	1883	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1884
	1885	CASE ( 'u', '#u' )
	1886	dopr_index(i) = 1
[87]	1887	dopr_unit(i) = 'm/s'
[1]	1888	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1889	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1890	dopr_initial_index(i) = 5
	1891	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1892	data_output_pr(i) = data_output_pr(i)(2:)
	1893	ENDIF
	1894
	1895	CASE ( 'v', '#v' )
	1896	dopr_index(i) = 2
[87]	1897	dopr_unit(i) = 'm/s'
	1898	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1899	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1900	dopr_initial_index(i) = 6
	1901	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1902	data_output_pr(i) = data_output_pr(i)(2:)
	1903	ENDIF
	1904
	1905	CASE ( 'w' )
	1906	dopr_index(i) = 3
[87]	1907	dopr_unit(i) = 'm/s'
	1908	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1909
	1910	CASE ( 'pt', '#pt' )
	1911	IF ( .NOT. cloud_physics ) THEN
	1912	dopr_index(i) = 4
[87]	1913	dopr_unit(i) = 'K'
[1]	1914	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1915	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1916	dopr_initial_index(i) = 7
	1917	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1918	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1919	data_output_pr(i) = data_output_pr(i)(2:)
	1920	ENDIF
	1921	ELSE
	1922	dopr_index(i) = 43
[87]	1923	dopr_unit(i) = 'K'
[1]	1924	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1925	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1926	dopr_initial_index(i) = 28
	1927	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1928	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1929	data_output_pr(i) = data_output_pr(i)(2:)
	1930	ENDIF
	1931	ENDIF
	1932
	1933	CASE ( 'e' )
	1934	dopr_index(i) = 8
[87]	1935	dopr_unit(i) = 'm2/s2'
[1]	1936	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1937	hom(nzb,2,8,:) = 0.0
	1938
	1939	CASE ( 'km', '#km' )
	1940	dopr_index(i) = 9
[87]	1941	dopr_unit(i) = 'm2/s'
[1]	1942	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1943	hom(nzb,2,9,:) = 0.0
	1944	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1945	dopr_initial_index(i) = 23
	1946	hom(:,2,23,:) = hom(:,2,9,:)
	1947	data_output_pr(i) = data_output_pr(i)(2:)
	1948	ENDIF
	1949
	1950	CASE ( 'kh', '#kh' )
	1951	dopr_index(i) = 10
[87]	1952	dopr_unit(i) = 'm2/s'
[1]	1953	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1954	hom(nzb,2,10,:) = 0.0
	1955	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1956	dopr_initial_index(i) = 24
	1957	hom(:,2,24,:) = hom(:,2,10,:)
	1958	data_output_pr(i) = data_output_pr(i)(2:)
	1959	ENDIF
	1960
	1961	CASE ( 'l', '#l' )
	1962	dopr_index(i) = 11
[87]	1963	dopr_unit(i) = 'm'
[1]	1964	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1965	hom(nzb,2,11,:) = 0.0
	1966	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1967	dopr_initial_index(i) = 25
	1968	hom(:,2,25,:) = hom(:,2,11,:)
	1969	data_output_pr(i) = data_output_pr(i)(2:)
	1970	ENDIF
	1971
	1972	CASE ( 'w"u"' )
	1973	dopr_index(i) = 12
[87]	1974	dopr_unit(i) = 'm2/s2'
[1]	1975	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1976	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1977
	1978	CASE ( 'wu' )
	1979	dopr_index(i) = 13
[87]	1980	dopr_unit(i) = 'm2/s2'
[1]	1981	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1982
	1983	CASE ( 'w"v"' )
	1984	dopr_index(i) = 14
[87]	1985	dopr_unit(i) = 'm2/s2'
[1]	1986	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1987	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1988
	1989	CASE ( 'wv' )
	1990	dopr_index(i) = 15
[87]	1991	dopr_unit(i) = 'm2/s2'
[1]	1992	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1993
	1994	CASE ( 'w"pt"' )
	1995	dopr_index(i) = 16
[87]	1996	dopr_unit(i) = 'K m/s'
[1]	1997	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1998
	1999	CASE ( 'wpt' )
	2000	dopr_index(i) = 17
[87]	2001	dopr_unit(i) = 'K m/s'
[1]	2002	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	2003
	2004	CASE ( 'wpt' )
	2005	dopr_index(i) = 18
[87]	2006	dopr_unit(i) = 'K m/s'
[1]	2007	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	2008
	2009	CASE ( 'wu' )
	2010	dopr_index(i) = 19
[87]	2011	dopr_unit(i) = 'm2/s2'
[1]	2012	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	2013	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	2014
	2015	CASE ( 'wv' )
	2016	dopr_index(i) = 20
[87]	2017	dopr_unit(i) = 'm2/s2'
[1]	2018	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2019	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2020
	2021	CASE ( 'wptBC' )
	2022	dopr_index(i) = 21
[87]	2023	dopr_unit(i) = 'K m/s'
[1]	2024	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2025
	2026	CASE ( 'wptBC' )
	2027	dopr_index(i) = 22
[87]	2028	dopr_unit(i) = 'K m/s'
[1]	2029	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2030
[96]	2031	CASE ( 'sa', '#sa' )
	2032	IF ( .NOT. ocean ) THEN
[215]	2033	message_string = 'data_output_pr = ' // &
	2034	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2035	'lemented for ocean = .FALSE.'
[226]	2036	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2037	ELSE
	2038	dopr_index(i) = 23
	2039	dopr_unit(i) = 'psu'
	2040	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2041	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2042	dopr_initial_index(i) = 26
	2043	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2044	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2045	data_output_pr(i) = data_output_pr(i)(2:)
	2046	ENDIF
	2047	ENDIF
	2048
[1]	2049	CASE ( 'u*2' )
	2050	dopr_index(i) = 30
[87]	2051	dopr_unit(i) = 'm2/s2'
[1]	2052	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2053
	2054	CASE ( 'v*2' )
	2055	dopr_index(i) = 31
[87]	2056	dopr_unit(i) = 'm2/s2'
[1]	2057	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2058
	2059	CASE ( 'w*2' )
	2060	dopr_index(i) = 32
[87]	2061	dopr_unit(i) = 'm2/s2'
[1]	2062	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2063
	2064	CASE ( 'pt*2' )
	2065	dopr_index(i) = 33
[87]	2066	dopr_unit(i) = 'K2'
[1]	2067	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2068
	2069	CASE ( 'e*' )
	2070	dopr_index(i) = 34
[87]	2071	dopr_unit(i) = 'm2/s2'
[1]	2072	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2073
	2074	CASE ( 'w2pt' )
	2075	dopr_index(i) = 35
[87]	2076	dopr_unit(i) = 'K m2/s2'
[1]	2077	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2078
	2079	CASE ( 'wpt2' )
	2080	dopr_index(i) = 36
[87]	2081	dopr_unit(i) = 'K2 m/s'
[1]	2082	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2083
	2084	CASE ( 'we' )
	2085	dopr_index(i) = 37
[87]	2086	dopr_unit(i) = 'm3/s3'
[1]	2087	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2088
	2089	CASE ( 'w*3' )
	2090	dopr_index(i) = 38
[87]	2091	dopr_unit(i) = 'm3/s3'
[1]	2092	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2093
	2094	CASE ( 'Sw' )
	2095	dopr_index(i) = 39
[89]	2096	dopr_unit(i) = 'none'
[1]	2097	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2098
[232]	2099	CASE ( 'p' )
	2100	dopr_index(i) = 40
	2101	dopr_unit(i) = 'Pa'
	2102	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2103
[1]	2104	CASE ( 'q', '#q' )
[108]	2105	IF ( .NOT. humidity ) THEN
[215]	2106	message_string = 'data_output_pr = ' // &
	2107	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2108	'lemented for humidity = .FALSE.'
[226]	2109	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2110	ELSE
	2111	dopr_index(i) = 41
[87]	2112	dopr_unit(i) = 'kg/kg'
	2113	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2114	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2115	dopr_initial_index(i) = 26
	2116	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2117	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2118	data_output_pr(i) = data_output_pr(i)(2:)
	2119	ENDIF
	2120	ENDIF
	2121
	2122	CASE ( 's', '#s' )
	2123	IF ( .NOT. passive_scalar ) THEN
[215]	2124	message_string = 'data_output_pr = ' // &
	2125	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2126	'lemented for passive_scalar = .FALSE.'
[226]	2127	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2128	ELSE
	2129	dopr_index(i) = 41
[87]	2130	dopr_unit(i) = 'kg/m3'
	2131	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2132	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2133	dopr_initial_index(i) = 26
	2134	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2135	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2136	data_output_pr(i) = data_output_pr(i)(2:)
	2137	ENDIF
	2138	ENDIF
	2139
	2140	CASE ( 'qv', '#qv' )
	2141	IF ( .NOT. cloud_physics ) THEN
	2142	dopr_index(i) = 41
[87]	2143	dopr_unit(i) = 'kg/kg'
	2144	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2145	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2146	dopr_initial_index(i) = 26
	2147	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2148	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2149	data_output_pr(i) = data_output_pr(i)(2:)
	2150	ENDIF
	2151	ELSE
	2152	dopr_index(i) = 42
[87]	2153	dopr_unit(i) = 'kg/kg'
	2154	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2155	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2156	dopr_initial_index(i) = 27
	2157	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2158	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2159	data_output_pr(i) = data_output_pr(i)(2:)
	2160	ENDIF
	2161	ENDIF
	2162
	2163	CASE ( 'lpt', '#lpt' )
	2164	IF ( .NOT. cloud_physics ) THEN
[215]	2165	message_string = 'data_output_pr = ' // &
	2166	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2167	'lemented for cloud_physics = .FALSE.'
[226]	2168	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2169	ELSE
	2170	dopr_index(i) = 4
[87]	2171	dopr_unit(i) = 'K'
[1]	2172	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2173	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2174	dopr_initial_index(i) = 7
	2175	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2176	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2177	data_output_pr(i) = data_output_pr(i)(2:)
	2178	ENDIF
	2179	ENDIF
	2180
	2181	CASE ( 'vpt', '#vpt' )
	2182	dopr_index(i) = 44
[87]	2183	dopr_unit(i) = 'K'
	2184	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2185	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2186	dopr_initial_index(i) = 29
	2187	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2188	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2189	data_output_pr(i) = data_output_pr(i)(2:)
	2190	ENDIF
	2191
	2192	CASE ( 'w"vpt"' )
	2193	dopr_index(i) = 45
[87]	2194	dopr_unit(i) = 'K m/s'
[1]	2195	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2196
	2197	CASE ( 'wvpt' )
	2198	dopr_index(i) = 46
[87]	2199	dopr_unit(i) = 'K m/s'
[1]	2200	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2201
	2202	CASE ( 'wvpt' )
	2203	dopr_index(i) = 47
[87]	2204	dopr_unit(i) = 'K m/s'
[1]	2205	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2206
	2207	CASE ( 'w"q"' )
[108]	2208	IF ( .NOT. humidity ) THEN
[215]	2209	message_string = 'data_output_pr = ' // &
	2210	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2211	'lemented for humidity = .FALSE.'
[226]	2212	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2213	ELSE
	2214	dopr_index(i) = 48
[87]	2215	dopr_unit(i) = 'kg/kg m/s'
[1]	2216	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2217	ENDIF
	2218
	2219	CASE ( 'wq' )
[108]	2220	IF ( .NOT. humidity ) THEN
[215]	2221	message_string = 'data_output_pr = ' // &
	2222	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2223	'lemented for humidity = .FALSE.'
[226]	2224	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2225	ELSE
	2226	dopr_index(i) = 49
[87]	2227	dopr_unit(i) = 'kg/kg m/s'
[1]	2228	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2229	ENDIF
	2230
	2231	CASE ( 'wq' )
[108]	2232	IF ( .NOT. humidity ) THEN
[215]	2233	message_string = 'data_output_pr = ' // &
	2234	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2235	'lemented for humidity = .FALSE.'
[226]	2236	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2237	ELSE
	2238	dopr_index(i) = 50
[87]	2239	dopr_unit(i) = 'kg/kg m/s'
[1]	2240	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2241	ENDIF
	2242
	2243	CASE ( 'w"s"' )
	2244	IF ( .NOT. passive_scalar ) THEN
[215]	2245	message_string = 'data_output_pr = ' // &
	2246	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2247	'lemented for passive_scalar = .FALSE.'
[226]	2248	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2249	ELSE
	2250	dopr_index(i) = 48
[87]	2251	dopr_unit(i) = 'kg/m3 m/s'
[1]	2252	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2253	ENDIF
	2254
	2255	CASE ( 'ws' )
	2256	IF ( .NOT. passive_scalar ) THEN
[215]	2257	message_string = 'data_output_pr = ' // &
	2258	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2259	'lemented for passive_scalar = .FALSE.'
[226]	2260	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2261	ELSE
	2262	dopr_index(i) = 49
[87]	2263	dopr_unit(i) = 'kg/m3 m/s'
[1]	2264	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2265	ENDIF
	2266
	2267	CASE ( 'ws' )
	2268	IF ( .NOT. passive_scalar ) THEN
[215]	2269	message_string = 'data_output_pr = ' // &
	2270	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2271	'lemented for passive_scalar = .FALSE.'
[226]	2272	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2273	ELSE
	2274	dopr_index(i) = 50
[87]	2275	dopr_unit(i) = 'kg/m3 m/s'
[1]	2276	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2277	ENDIF
	2278
	2279	CASE ( 'w"qv"' )
[75]	2280	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2281	THEN
	2282	dopr_index(i) = 48
[87]	2283	dopr_unit(i) = 'kg/kg m/s'
[1]	2284	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2285	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2286	dopr_index(i) = 51
[87]	2287	dopr_unit(i) = 'kg/kg m/s'
[1]	2288	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2289	ELSE
[215]	2290	message_string = 'data_output_pr = ' // &
	2291	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2292	'lemented for cloud_physics = .FALSE. an&' // &
	2293	'd humidity = .FALSE.'
[226]	2294	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2295	ENDIF
	2296
	2297	CASE ( 'wqv' )
[75]	2298	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2299	THEN
	2300	dopr_index(i) = 49
[87]	2301	dopr_unit(i) = 'kg/kg m/s'
[1]	2302	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2303	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2304	dopr_index(i) = 52
[87]	2305	dopr_unit(i) = 'kg/kg m/s'
[1]	2306	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2307	ELSE
[215]	2308	message_string = 'data_output_pr = ' // &
	2309	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2310	'lemented for cloud_physics = .FALSE. an&' // &
	2311	'd humidity = .FALSE.'
[226]	2312	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2313	ENDIF
	2314
	2315	CASE ( 'wqv' )
[75]	2316	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2317	THEN
	2318	dopr_index(i) = 50
[87]	2319	dopr_unit(i) = 'kg/kg m/s'
[1]	2320	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2321	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2322	dopr_index(i) = 53
[87]	2323	dopr_unit(i) = 'kg/kg m/s'
[1]	2324	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2325	ELSE
[215]	2326	message_string = 'data_output_pr = ' // &
	2327	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2328	'lemented for cloud_physics = .FALSE. an&' // &
	2329	'd humidity = .FALSE.'
[226]	2330	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2331	ENDIF
	2332
	2333	CASE ( 'ql' )
	2334	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2335	message_string = 'data_output_pr = ' // &
	2336	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2337	'lemented for cloud_physics = .FALSE. or' // &
	2338	'&cloud_droplets = .FALSE.'
[226]	2339	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2340	ELSE
	2341	dopr_index(i) = 54
[87]	2342	dopr_unit(i) = 'kg/kg'
[1]	2343	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2344	ENDIF
	2345
[524]	2346	CASE ( 'wuu*:dz' )
[1]	2347	dopr_index(i) = 55
[87]	2348	dopr_unit(i) = 'm2/s3'
[1]	2349	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2350
[524]	2351	CASE ( 'wp:dz' )
[1]	2352	dopr_index(i) = 56
[87]	2353	dopr_unit(i) = 'm2/s3'
[106]	2354	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2355
[524]	2356	CASE ( 'w"e:dz' )
[1]	2357	dopr_index(i) = 57
[87]	2358	dopr_unit(i) = 'm2/s3'
[1]	2359	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2360
[667]	2361
[1]	2362	CASE ( 'u"pt"' )
	2363	dopr_index(i) = 58
[87]	2364	dopr_unit(i) = 'K m/s'
[1]	2365	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2366
	2367	CASE ( 'upt' )
	2368	dopr_index(i) = 59
[87]	2369	dopr_unit(i) = 'K m/s'
[1]	2370	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2371
	2372	CASE ( 'upt_t' )
	2373	dopr_index(i) = 60
[87]	2374	dopr_unit(i) = 'K m/s'
[1]	2375	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2376
	2377	CASE ( 'v"pt"' )
	2378	dopr_index(i) = 61
[87]	2379	dopr_unit(i) = 'K m/s'
[1]	2380	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2381
	2382	CASE ( 'vpt' )
	2383	dopr_index(i) = 62
[87]	2384	dopr_unit(i) = 'K m/s'
[1]	2385	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2386
	2387	CASE ( 'vpt_t' )
	2388	dopr_index(i) = 63
[87]	2389	dopr_unit(i) = 'K m/s'
[1]	2390	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2391
[96]	2392	CASE ( 'rho' )
[388]	2393	IF ( .NOT. ocean ) THEN
	2394	message_string = 'data_output_pr = ' // &
	2395	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2396	'lemented for ocean = .FALSE.'
	2397	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2398	ELSE
	2399	dopr_index(i) = 64
	2400	dopr_unit(i) = 'kg/m3'
	2401	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2402	ENDIF
[1]	2403
[96]	2404	CASE ( 'w"sa"' )
	2405	IF ( .NOT. ocean ) THEN
[215]	2406	message_string = 'data_output_pr = ' // &
	2407	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2408	'lemented for ocean = .FALSE.'
[226]	2409	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2410	ELSE
	2411	dopr_index(i) = 65
	2412	dopr_unit(i) = 'psu m/s'
	2413	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2414	ENDIF
	2415
	2416	CASE ( 'wsa' )
	2417	IF ( .NOT. ocean ) THEN
[215]	2418	message_string = 'data_output_pr = ' // &
	2419	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2420	'lemented for ocean = .FALSE.'
[226]	2421	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2422	ELSE
	2423	dopr_index(i) = 66
	2424	dopr_unit(i) = 'psu m/s'
	2425	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2426	ENDIF
	2427
	2428	CASE ( 'wsa' )
	2429	IF ( .NOT. ocean ) THEN
[215]	2430	message_string = 'data_output_pr = ' // &
	2431	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2432	'lemented for ocean = .FALSE.'
[226]	2433	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2434	ELSE
	2435	dopr_index(i) = 67
	2436	dopr_unit(i) = 'psu m/s'
	2437	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2438	ENDIF
	2439
[106]	2440	CASE ( 'wp' )
	2441	dopr_index(i) = 68
	2442	dopr_unit(i) = 'm3/s3'
	2443	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2444
[106]	2445	CASE ( 'w"e' )
	2446	dopr_index(i) = 69
	2447	dopr_unit(i) = 'm3/s3'
	2448	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2449
[197]	2450	CASE ( 'q*2' )
	2451	IF ( .NOT. humidity ) THEN
[215]	2452	message_string = 'data_output_pr = ' // &
	2453	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2454	'lemented for humidity = .FALSE.'
[226]	2455	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2456	ELSE
	2457	dopr_index(i) = 70
	2458	dopr_unit(i) = 'kg2/kg2'
	2459	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2460	ENDIF
[106]	2461
[388]	2462	CASE ( 'prho' )
	2463	IF ( .NOT. ocean ) THEN
	2464	message_string = 'data_output_pr = ' // &
	2465	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2466	'lemented for ocean = .FALSE.'
	2467	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2468	ELSE
	2469	dopr_index(i) = 71
	2470	dopr_unit(i) = 'kg/m3'
	2471	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2472	ENDIF
	2473
	2474	CASE ( 'hyp' )
	2475	dopr_index(i) = 72
[531]	2476	dopr_unit(i) = 'dbar'
[388]	2477	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2478
[1]	2479	CASE DEFAULT
[87]	2480
	2481	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2482
	2483	IF ( unit == 'illegal' ) THEN
[215]	2484	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2485	message_string = 'illegal value for data_output_pr or ' // &
	2486	'data_output_pr_user = "' // &
	2487	TRIM( data_output_pr(i) ) // '"'
[226]	2488	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2489	ELSE
	2490	message_string = 'illegal value for data_output_pr = "' // &
	2491	TRIM( data_output_pr(i) ) // '"'
[226]	2492	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2493	ENDIF
[1]	2494	ENDIF
	2495
	2496	END SELECT
[667]	2497
[1]	2498	!
	2499	!-- Check to which of the predefined coordinate systems the profile belongs
	2500	DO k = 1, crmax
	2501	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2502	/=0 ) &
	2503	THEN
	2504	dopr_crossindex(i) = k
	2505	EXIT
	2506	ENDIF
	2507	ENDDO
	2508	!
	2509	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2510	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2511	!-- control characters
	2512	dopr_label(i) = data_output_pr(i)
	2513	position = INDEX( dopr_label(i) , '"' )
	2514	DO WHILE ( position /= 0 )
	2515	dopr_label(i)(position:position) = ''''
	2516	position = INDEX( dopr_label(i) , '"' )
	2517	ENDDO
	2518
	2519	ENDDO
	2520
	2521	!
	2522	!-- y-value range of the coordinate system (PROFIL).
	2523	!-- x-value range determined in plot_1d.
[94]	2524	IF ( .NOT. ocean ) THEN
	2525	cross_uymin = 0.0
	2526	IF ( z_max_do1d == -1.0 ) THEN
	2527	cross_uymax = zu(nzt+1)
	2528	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2529	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2530	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2531	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2532	ELSE
	2533	cross_uymax = z_max_do1d
	2534	ENDIF
[1]	2535	ENDIF
	2536
	2537	!
	2538	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2539	!-- permissible
	2540	DO i = 1, crmax
	2541	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2542
	2543	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2544	j = 0
	2545
	2546	CASE DEFAULT
[215]	2547	message_string = 'unknown normalization method cross_normali' // &
	2548	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2549	'"'
[226]	2550	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2551
	2552	END SELECT
	2553	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2554
	2555	CASE ( '', 'z_i' )
	2556	j = 0
	2557
	2558	CASE DEFAULT
[215]	2559	message_string = 'unknown normalization method cross_normali' // &
	2560	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2561	'"'
[226]	2562	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2563
	2564	END SELECT
	2565	ENDDO
	2566	!
	2567	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2568	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2569	THEN
[215]	2570	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2571	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2572	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2573	ENDIF
	2574
	2575
	2576	!
	2577	!-- Append user-defined data output variables to the standard data output
	2578	IF ( data_output_user(1) /= ' ' ) THEN
	2579	i = 1
	2580	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2581	i = i + 1
	2582	ENDDO
	2583	j = 1
	2584	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2585	IF ( i > 100 ) THEN
[215]	2586	message_string = 'number of output quantitities given by data' // &
	2587	'_output and data_output_user exceeds the limit of 100'
[226]	2588	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2589	ENDIF
	2590	data_output(i) = data_output_user(j)
	2591	i = i + 1
	2592	j = j + 1
	2593	ENDDO
	2594	ENDIF
	2595
	2596	!
	2597	!-- Check and set steering parameters for 2d/3d data output and averaging
	2598	i = 1
	2599	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2600	!
	2601	!-- Check for data averaging
	2602	ilen = LEN_TRIM( data_output(i) )
	2603	j = 0 ! no data averaging
	2604	IF ( ilen > 3 ) THEN
	2605	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2606	j = 1 ! data averaging
	2607	data_output(i) = data_output(i)(1:ilen-3)
	2608	ENDIF
	2609	ENDIF
	2610	!
	2611	!-- Check for cross section or volume data
	2612	ilen = LEN_TRIM( data_output(i) )
	2613	k = 0 ! 3d data
	2614	var = data_output(i)(1:ilen)
	2615	IF ( ilen > 3 ) THEN
	2616	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2617	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2618	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2619	k = 1 ! 2d data
	2620	var = data_output(i)(1:ilen-3)
	2621	ENDIF
	2622	ENDIF
	2623	!
	2624	!-- Check for allowed value and set units
	2625	SELECT CASE ( TRIM( var ) )
	2626
	2627	CASE ( 'e' )
	2628	IF ( constant_diffusion ) THEN
[215]	2629	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2630	'res constant_diffusion = .FALSE.'
[226]	2631	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2632	ENDIF
	2633	unit = 'm2/s2'
	2634
[771]	2635	CASE ( 'lpt' )
	2636	IF ( .NOT. cloud_physics ) THEN
	2637	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2638	'res cloud_physics = .TRUE.'
	2639	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2640	ENDIF
	2641	unit = 'K'
	2642
[1]	2643	CASE ( 'pc', 'pr' )
	2644	IF ( .NOT. particle_advection ) THEN
[215]	2645	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2646	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2647	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2648	ENDIF
	2649	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2650	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2651
	2652	CASE ( 'q', 'vpt' )
[75]	2653	IF ( .NOT. humidity ) THEN
[215]	2654	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2655	'res humidity = .TRUE.'
[226]	2656	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2657	ENDIF
	2658	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2659	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2660
	2661	CASE ( 'ql' )
	2662	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2663	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2664	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2665	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2666	ENDIF
	2667	unit = 'kg/kg'
	2668
	2669	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2670	IF ( .NOT. cloud_droplets ) THEN
[215]	2671	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2672	'res cloud_droplets = .TRUE.'
[226]	2673	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2674	ENDIF
	2675	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2676	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2677	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2678
	2679	CASE ( 'qv' )
	2680	IF ( .NOT. cloud_physics ) THEN
[215]	2681	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2682	'res cloud_physics = .TRUE.'
[226]	2683	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2684	ENDIF
	2685	unit = 'kg/kg'
	2686
[96]	2687	CASE ( 'rho' )
	2688	IF ( .NOT. ocean ) THEN
[215]	2689	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2690	'res ocean = .TRUE.'
[226]	2691	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2692	ENDIF
	2693	unit = 'kg/m3'
	2694
[1]	2695	CASE ( 's' )
	2696	IF ( .NOT. passive_scalar ) THEN
[215]	2697	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2698	'res passive_scalar = .TRUE.'
[226]	2699	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2700	ENDIF
	2701	unit = 'conc'
	2702
[96]	2703	CASE ( 'sa' )
	2704	IF ( .NOT. ocean ) THEN
[215]	2705	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2706	'res ocean = .TRUE.'
[226]	2707	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2708	ENDIF
	2709	unit = 'psu'
	2710
[354]	2711	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2712	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2713	message_string = 'illegal value for data_output: "' // &
	2714	TRIM( var ) // '" & only 2d-horizontal ' // &
	2715	'cross sections are allowed for this value'
[226]	2716	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2717	ENDIF
	2718	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2719	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2720	'res cloud_physics = .TRUE.'
[226]	2721	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2722	ENDIF
[72]	2723	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2724	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2725	'res precipitation = .TRUE.'
[226]	2726	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2727	ENDIF
	2728	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2729	message_string = 'temporal averaging of precipitation ' // &
	2730	'amount "' // TRIM( var ) // '" is not possible'
[226]	2731	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2732	ENDIF
	2733	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2734	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2735	'res precipitation = .TRUE.'
[226]	2736	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2737	ENDIF
[354]	2738	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2739	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2740	'res humidity = .TRUE.'
	2741	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2742	ENDIF
[72]	2743
[354]	2744	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2745	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2746	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2747	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2748	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2749	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2750	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2751	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2752
[1]	2753
	2754	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2755	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2756	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2757	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2758	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2759	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2760	CONTINUE
	2761
	2762	CASE DEFAULT
	2763	CALL user_check_data_output( var, unit )
	2764
	2765	IF ( unit == 'illegal' ) THEN
[215]	2766	IF ( data_output_user(1) /= ' ' ) THEN
	2767	message_string = 'illegal value for data_output or ' // &
	2768	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2769	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2770	ELSE
	2771	message_string = 'illegal value for data_output =' // &
	2772	TRIM( data_output(i) ) // '"'
[226]	2773	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2774	ENDIF
	2775	ENDIF
	2776
	2777	END SELECT
	2778	!
	2779	!-- Set the internal steering parameters appropriately
	2780	IF ( k == 0 ) THEN
	2781	do3d_no(j) = do3d_no(j) + 1
	2782	do3d(j,do3d_no(j)) = data_output(i)
	2783	do3d_unit(j,do3d_no(j)) = unit
	2784	ELSE
	2785	do2d_no(j) = do2d_no(j) + 1
	2786	do2d(j,do2d_no(j)) = data_output(i)
	2787	do2d_unit(j,do2d_no(j)) = unit
	2788	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2789	data_output_xy(j) = .TRUE.
	2790	ENDIF
	2791	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2792	data_output_xz(j) = .TRUE.
	2793	ENDIF
	2794	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2795	data_output_yz(j) = .TRUE.
	2796	ENDIF
	2797	ENDIF
	2798
	2799	IF ( j == 1 ) THEN
	2800	!
	2801	!-- Check, if variable is already subject to averaging
	2802	found = .FALSE.
	2803	DO k = 1, doav_n
	2804	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2805	ENDDO
	2806
	2807	IF ( .NOT. found ) THEN
	2808	doav_n = doav_n + 1
	2809	doav(doav_n) = var
	2810	ENDIF
	2811	ENDIF
	2812
	2813	i = i + 1
	2814	ENDDO
	2815
	2816	!
[376]	2817	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2818	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2819	WRITE( message_string, * ) 'output of averaged quantity "', &
	2820	TRIM( doav(1) ), '_av" requires to set a ', &
	2821	'non-zero & averaging interval'
	2822	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2823	ENDIF
	2824
	2825	!
[308]	2826	!-- Check sectional planes and store them in one shared array
	2827	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2828	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2829	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2830	ENDIF
	2831	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2832	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2833	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2834	ENDIF
	2835	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2836	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2837	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2838	ENDIF
[1]	2839	section(:,1) = section_xy
	2840	section(:,2) = section_xz
	2841	section(:,3) = section_yz
	2842
	2843	!
	2844	!-- Upper plot limit (grid point value) for 1D profiles
	2845	IF ( z_max_do1d == -1.0 ) THEN
[667]	2846
[1]	2847	nz_do1d = nzt+1
[667]	2848
[1]	2849	ELSE
	2850	DO k = nzb+1, nzt+1
	2851	nz_do1d = k
	2852	IF ( zw(k) > z_max_do1d ) EXIT
	2853	ENDDO
	2854	ENDIF
	2855
	2856	!
	2857	!-- Upper plot limit for 2D vertical sections
	2858	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2859	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2860	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2861	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2862	' (zu(nzt))'
[226]	2863	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2864	ENDIF
	2865
	2866	!
	2867	!-- Upper plot limit for 3D arrays
	2868	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2869
	2870	!
	2871	!-- Determine and check accuracy for compressed 3D plot output
	2872	IF ( do3d_compress ) THEN
	2873	!
	2874	!-- Compression only permissible on T3E machines
	2875	IF ( host(1:3) /= 't3e' ) THEN
[215]	2876	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2877	TRIM( host ) // '"'
[226]	2878	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2879	ENDIF
	2880
	2881	i = 1
	2882	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2883
	2884	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2885	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2886	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2887	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2888	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2889	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2890	ENDIF
	2891
	2892	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2893	var = do3d_comp_prec(i)(1:ilen-1)
	2894
	2895	SELECT CASE ( var )
	2896
	2897	CASE ( 'u' )
	2898	j = 1
	2899	CASE ( 'v' )
	2900	j = 2
	2901	CASE ( 'w' )
	2902	j = 3
	2903	CASE ( 'p' )
	2904	j = 4
	2905	CASE ( 'pt' )
	2906	j = 5
	2907
	2908	CASE DEFAULT
[215]	2909	WRITE( message_string, * ) 'unknown variable "', &
	2910	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2911	i, ')'
[226]	2912	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2913
	2914	END SELECT
	2915
	2916	plot_3d_precision(j)%precision = prec
	2917	i = i + 1
	2918
	2919	ENDDO
	2920	ENDIF
	2921
	2922	!
	2923	!-- Check the data output format(s)
	2924	IF ( data_output_format(1) == ' ' ) THEN
	2925	!
	2926	!-- Default value
	2927	netcdf_output = .TRUE.
	2928	ELSE
	2929	i = 1
	2930	DO WHILE ( data_output_format(i) /= ' ' )
	2931
	2932	SELECT CASE ( data_output_format(i) )
	2933
	2934	CASE ( 'netcdf' )
	2935	netcdf_output = .TRUE.
	2936	CASE ( 'iso2d' )
	2937	iso2d_output = .TRUE.
	2938	CASE ( 'profil' )
	2939	profil_output = .TRUE.
	2940	CASE ( 'avs' )
	2941	avs_output = .TRUE.
	2942
	2943	CASE DEFAULT
[215]	2944	message_string = 'unknown value for data_output_format "' // &
	2945	TRIM( data_output_format(i) ) // '"'
[226]	2946	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2947
	2948	END SELECT
	2949
	2950	i = i + 1
	2951	IF ( i > 10 ) EXIT
	2952
	2953	ENDDO
	2954
	2955	ENDIF
	2956
	2957	!
[410]	2958	!-- Check mask conditions
[553]	2959	DO mid = 1, max_masks
[567]	2960	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	2961	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	2962	masks = masks + 1
	2963	ENDIF
	2964	ENDDO
	2965
[410]	2966	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2967	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2968	'<= ', max_masks, ' (=max_masks)'
[564]	2969	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	2970	ENDIF
	2971	IF ( masks > 0 ) THEN
	2972	mask_scale(1) = mask_scale_x
	2973	mask_scale(2) = mask_scale_y
	2974	mask_scale(3) = mask_scale_z
	2975	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2976	WRITE( message_string, * ) &
	2977	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2978	'must be > 0.0'
[564]	2979	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	2980	ENDIF
	2981	!
	2982	!-- Generate masks for masked data output
	2983	CALL init_masks
	2984	ENDIF
	2985
	2986	!
[493]	2987	!-- Check the NetCDF data format
	2988	IF ( netcdf_data_format > 2 ) THEN
[845]	2989	#if defined( __netcdf4 ) && ! defined ( __check )
[493]	2990	CONTINUE
	2991	#else
	2992	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
	2993	'cpp-directive __netcdf4 given & switch ' // &
	2994	'back to 64-bit offset format'
	2995	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	2996	netcdf_data_format = 2
	2997	#endif
	2998	ENDIF
	2999
	3000	!
[667]	3001
[809]	3002	#if ! defined( __check )
[1]	3003	!-- Check netcdf precison
	3004	ldum = .FALSE.
	3005	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	3006	#endif
[1]	3007	!
	3008	!-- Check, whether a constant diffusion coefficient shall be used
	3009	IF ( km_constant /= -1.0 ) THEN
	3010	IF ( km_constant < 0.0 ) THEN
[215]	3011	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	3012	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	3013	ELSE
	3014	IF ( prandtl_number < 0.0 ) THEN
[215]	3015	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	3016	' < 0.0'
[226]	3017	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	3018	ENDIF
	3019	constant_diffusion = .TRUE.
	3020
	3021	IF ( prandtl_layer ) THEN
[215]	3022	message_string = 'prandtl_layer is not allowed with fixed ' // &
	3023	'value of km'
[226]	3024	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	3025	ENDIF
	3026	ENDIF
	3027	ENDIF
	3028
	3029	!
	3030	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	3031	!-- for the horizontal diffusivity used within the outflow damping layer,
	3032	!-- and check/set the width of the damping layer
	3033	IF ( bc_lr /= 'cyclic' ) THEN
	3034	IF ( km_damp_max == -1.0 ) THEN
	3035	km_damp_max = 0.5 * dx
	3036	ENDIF
	3037	IF ( outflow_damping_width == -1.0 ) THEN
	3038	outflow_damping_width = MIN( 20, nx/2 )
	3039	ENDIF
	3040	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	3041	message_string = 'outflow_damping width out of range'
[226]	3042	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3043	ENDIF
	3044	ENDIF
	3045
	3046	IF ( bc_ns /= 'cyclic' ) THEN
	3047	IF ( km_damp_max == -1.0 ) THEN
	3048	km_damp_max = 0.5 * dy
	3049	ENDIF
	3050	IF ( outflow_damping_width == -1.0 ) THEN
	3051	outflow_damping_width = MIN( 20, ny/2 )
	3052	ENDIF
	3053	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	3054	message_string = 'outflow_damping width out of range'
[226]	3055	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3056	ENDIF
	3057	ENDIF
	3058
	3059	!
	3060	!-- Check value range for rif
	3061	IF ( rif_min >= rif_max ) THEN
[215]	3062	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3063	'than rif_max = ', rif_max
[226]	3064	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3065	ENDIF
	3066
	3067	!
	3068	!-- Determine upper and lower hight level indices for random perturbations
[97]	3069	IF ( disturbance_level_b == -9999999.9 ) THEN
	3070	IF ( ocean ) THEN
	3071	disturbance_level_b = zu((nzt*2)/3)
	3072	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3073	ELSE
	3074	disturbance_level_b = zu(nzb+3)
	3075	disturbance_level_ind_b = nzb + 3
	3076	ENDIF
[1]	3077	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3078	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3079	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3080	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3081	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3082	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3083	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3084	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3085	ELSE
	3086	DO k = 3, nzt-2
	3087	IF ( disturbance_level_b <= zu(k) ) THEN
	3088	disturbance_level_ind_b = k
	3089	EXIT
	3090	ENDIF
	3091	ENDDO
	3092	ENDIF
	3093
[97]	3094	IF ( disturbance_level_t == -9999999.9 ) THEN
	3095	IF ( ocean ) THEN
	3096	disturbance_level_t = zu(nzt-3)
	3097	disturbance_level_ind_t = nzt - 3
	3098	ELSE
	3099	disturbance_level_t = zu(nzt/3)
	3100	disturbance_level_ind_t = nzt / 3
	3101	ENDIF
[1]	3102	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3103	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3104	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3105	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3106	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3107	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3108	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3109	disturbance_level_b
[226]	3110	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3111	ELSE
	3112	DO k = 3, nzt-2
	3113	IF ( disturbance_level_t <= zu(k) ) THEN
	3114	disturbance_level_ind_t = k
	3115	EXIT
	3116	ENDIF
	3117	ENDDO
	3118	ENDIF
	3119
	3120	!
	3121	!-- Check again whether the levels determined this way are ok.
	3122	!-- Error may occur at automatic determination and too few grid points in
	3123	!-- z-direction.
	3124	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3125	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3126	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3127	disturbance_level_b
[226]	3128	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3129	ENDIF
	3130
	3131	!
	3132	!-- Determine the horizontal index range for random perturbations.
	3133	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3134	!-- near the inflow and the perturbation area is further limited to ...(1)
	3135	!-- after the initial phase of the flow.
	3136	dist_nxl = 0; dist_nxr = nx
	3137	dist_nys = 0; dist_nyn = ny
	3138	IF ( bc_lr /= 'cyclic' ) THEN
	3139	IF ( inflow_disturbance_begin == -1 ) THEN
	3140	inflow_disturbance_begin = MIN( 10, nx/2 )
	3141	ENDIF
	3142	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3143	THEN
[215]	3144	message_string = 'inflow_disturbance_begin out of range'
[226]	3145	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3146	ENDIF
	3147	IF ( inflow_disturbance_end == -1 ) THEN
	3148	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3149	ENDIF
	3150	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3151	THEN
[215]	3152	message_string = 'inflow_disturbance_end out of range'
[226]	3153	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3154	ENDIF
	3155	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3156	IF ( inflow_disturbance_begin == -1 ) THEN
	3157	inflow_disturbance_begin = MIN( 10, ny/2 )
	3158	ENDIF
	3159	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3160	THEN
[215]	3161	message_string = 'inflow_disturbance_begin out of range'
[226]	3162	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3163	ENDIF
	3164	IF ( inflow_disturbance_end == -1 ) THEN
	3165	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3166	ENDIF
	3167	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3168	THEN
[215]	3169	message_string = 'inflow_disturbance_end out of range'
[226]	3170	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3171	ENDIF
	3172	ENDIF
	3173
[73]	3174	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3175	dist_nxr = nx - inflow_disturbance_begin
	3176	dist_nxl(1) = nx - inflow_disturbance_end
[73]	3177	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3178	dist_nxl = inflow_disturbance_begin
	3179	dist_nxr(1) = inflow_disturbance_end
[73]	3180	ENDIF
	3181	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3182	dist_nyn = ny - inflow_disturbance_begin
	3183	dist_nys(1) = ny - inflow_disturbance_end
[73]	3184	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3185	dist_nys = inflow_disturbance_begin
	3186	dist_nyn(1) = inflow_disturbance_end
	3187	ENDIF
	3188
	3189	!
[151]	3190	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3191	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	3192	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3193	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3194	'condition at the inflow boundary'
[226]	3195	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3196	ENDIF
	3197
	3198	!
	3199	!-- In case of turbulent inflow calculate the index of the recycling plane
	3200	IF ( turbulent_inflow ) THEN
	3201	IF ( recycling_width == 9999999.9 ) THEN
	3202	!
	3203	!-- Set the default value for the width of the recycling domain
	3204	recycling_width = 0.1 * nx * dx
	3205	ELSE
	3206	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3207	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3208	' ', recycling_width
[226]	3209	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3210	ENDIF
	3211	ENDIF
	3212	!
	3213	!-- Calculate the index
	3214	recycling_plane = recycling_width / dx
	3215	ENDIF
	3216
	3217	!
[1]	3218	!-- Check random generator
	3219	IF ( random_generator /= 'system-specific' .AND. &
	3220	random_generator /= 'numerical-recipes' ) THEN
[215]	3221	message_string = 'unknown random generator: random_generator = "' // &
	3222	TRIM( random_generator ) // '"'
[226]	3223	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3224	ENDIF
	3225
	3226	!
	3227	!-- Determine damping level index for 1D model
	3228	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3229	IF ( damp_level_1d == -1.0 ) THEN
	3230	damp_level_1d = zu(nzt+1)
	3231	damp_level_ind_1d = nzt + 1
	3232	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3233	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3234	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3235	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3236	ELSE
	3237	DO k = 1, nzt+1
	3238	IF ( damp_level_1d <= zu(k) ) THEN
	3239	damp_level_ind_1d = k
	3240	EXIT
	3241	ENDIF
	3242	ENDDO
	3243	ENDIF
	3244	ENDIF
[215]	3245
[1]	3246	!
	3247	!-- Check some other 1d-model parameters
	3248	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3249	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3250	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3251	'" is unknown'
[226]	3252	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3253	ENDIF
	3254	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3255	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3256	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3257	'" is unknown'
[226]	3258	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3259	ENDIF
	3260
	3261	!
	3262	!-- Set time for the next user defined restart (time_restart is the
	3263	!-- internal parameter for steering restart events)
	3264	IF ( restart_time /= 9999999.9 ) THEN
[291]	3265	IF ( restart_time > time_since_reference_point ) THEN
	3266	time_restart = restart_time
	3267	ENDIF
[1]	3268	ELSE
	3269	!
	3270	!-- In case of a restart run, set internal parameter to default (no restart)
	3271	!-- if the NAMELIST-parameter restart_time is omitted
	3272	time_restart = 9999999.9
	3273	ENDIF
	3274
	3275	!
	3276	!-- Set default value of the time needed to terminate a model run
	3277	IF ( termination_time_needed == -1.0 ) THEN
	3278	IF ( host(1:3) == 'ibm' ) THEN
	3279	termination_time_needed = 300.0
	3280	ELSE
	3281	termination_time_needed = 35.0
	3282	ENDIF
	3283	ENDIF
	3284
	3285	!
	3286	!-- Check the time needed to terminate a model run
	3287	IF ( host(1:3) == 't3e' ) THEN
	3288	!
	3289	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3290	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3291	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3292	WRITE( message_string, * ) 'termination_time_needed = ', &
	3293	termination_time_needed, ' must be > 30.0 on host "', &
	3294	TRIM( host ), '"'
[226]	3295	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3296	ENDIF
	3297	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3298	!
	3299	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3300	!-- because the job time consumed before executing palm (for compiling,
	3301	!-- copying of files, etc.) has to be regarded
	3302	IF ( termination_time_needed < 300.0 ) THEN
[215]	3303	WRITE( message_string, * ) 'termination_time_needed = ', &
	3304	termination_time_needed, ' should be >= 300.0 on host "', &
	3305	TRIM( host ), '"'
[226]	3306	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3307	ENDIF
	3308	ENDIF
	3309
[217]	3310	!
[240]	3311	!-- Check pressure gradient conditions
	3312	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3313	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3314	'w are .TRUE. but one of them must be .FALSE.'
[240]	3315	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3316	ENDIF
	3317	IF ( dp_external ) THEN
	3318	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3319	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3320	' of range'
	3321	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3322	ENDIF
	3323	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3324	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3325	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3326	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3327	ENDIF
	3328	ENDIF
	3329	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3330	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3331	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3332	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3333	ENDIF
[241]	3334	IF ( conserve_volume_flow ) THEN
	3335	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3336
	3337	conserve_volume_flow_mode = 'initial_profiles'
	3338
[241]	3339	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3340	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3341	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3342	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3343	conserve_volume_flow_mode
	3344	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3345	ENDIF
[667]	3346	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3347	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3348	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3349	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3350	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3351	ENDIF
	3352	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3353	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3354	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3355	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3356	' or ''bulk_velocity'''
	3357	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3358	ENDIF
	3359	ENDIF
	3360	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3361	( .NOT. conserve_volume_flow .OR. &
	3362	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3363	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3364	'conserve_volume_flow = .T. and ', &
[241]	3365	'conserve_volume_flow_mode = ''bulk_velocity'''
	3366	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3367	ENDIF
[240]	3368
	3369	!
[264]	3370	!-- Check particle attributes
	3371	IF ( particle_color /= 'none' ) THEN
	3372	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3373	particle_color /= 'z' ) THEN
	3374	message_string = 'illegal value for parameter particle_color: ' // &
	3375	TRIM( particle_color)
	3376	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3377	ELSE
	3378	IF ( color_interval(2) <= color_interval(1) ) THEN
	3379	message_string = 'color_interval(2) <= color_interval(1)'
	3380	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3381	ENDIF
	3382	ENDIF
	3383	ENDIF
	3384
	3385	IF ( particle_dvrpsize /= 'none' ) THEN
	3386	IF ( particle_dvrpsize /= 'absw' ) THEN
	3387	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3388	' ' // TRIM( particle_color)
	3389	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3390	ELSE
	3391	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3392	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3393	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3394	ENDIF
	3395	ENDIF
	3396	ENDIF
	3397
	3398	!
[217]	3399	!-- Check &userpar parameters
	3400	CALL user_check_parameters
[1]	3401
[217]	3402
[667]	3403
[1]	3404	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |