Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 810

Last change on this file since 810 was 810, checked in by maronga, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 131.1 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[667]	6	!
[810]	7	!
[668]	8	! Former revisions:
	9	! -----------------
[708]	10	! $Id: check_parameters.f90 810 2012-01-30 13:40:12Z maronga $
[687]	11	!
[810]	12	! 809 2012-01-30 13:32:58Z maronga
	13	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	14	!
[808]	15	! 807 2012-01-25 11:53:51Z maronga
	16	! New cpp directive "__check" implemented which is used by check_namelist_files
	17	!
[775]	18	! 774 2011-10-27 13:34:16Z letzel
	19	! bugfix for prescribed u,v-profiles
	20	!
[768]	21	! 767 2011-10-14 06:39:12Z raasch
	22	! Calculating u,v-profiles from given profiles by linear interpolation.
	23	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	24	!
[708]	25	! 707 2011-03-29 11:39:40Z raasch
	26	! setting of bc_lr/ns_dirrad/raddir
	27	!
	28	! 689 2011-02-20 19:31:12z gryschka
[690]	29	! Bugfix for some logical expressions
	30	! (syntax was not compatible with all compilers)
[687]	31	!
[690]	32	! 680 2011-02-04 23:16:06Z gryschka
[681]	33	! init_vortex is not allowed with volume_flow_control
[668]	34	!
[674]	35	! 673 2011-01-18 16:19:48Z suehring
	36	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	37	!
[668]	38	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	39	! Exchange of parameters between ocean and atmosphere via PE0
	40	! Check for illegal combination of ws-scheme and timestep scheme.
	41	! Check for topography and ws-scheme.
	42	! Check for not cyclic boundary conditions in combination with ws-scheme and
	43	! loop_optimization = 'vector'.
	44	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	45	! Different processor/grid topology in atmosphere and ocean is now allowed!
	46	! Bugfixes in checking for conserve_volume_flow_mode
[601]	47	! 600 2010-11-24 16:10:51Z raasch
	48	! change due to new default value of surface_waterflux
[581]	49	! 580 2010-10-05 13:59:11Z heinze
[601]	50	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	51	!
[568]	52	! 567 2010-10-01 10:46:30Z helmke
	53	! calculating masks changed
	54	!
[565]	55	! 564 2010-09-30 13:18:59Z helmke
	56	! palm message identifiers of masked output changed, 20 replaced by max_masks
	57	!
[554]	58	! 553 2010-09-01 14:09:06Z weinreis
	59	! masks is calculated and removed from inipar
[532]	60	!
	61	! 531 2010-04-21 06:47:21Z heinze
	62	! Bugfix: unit of hyp changed to dbar
[392]	63	!
[525]	64	! 524 2010-03-30 02:04:51Z raasch
	65	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	66	!
[494]	67	! 493 2010-03-01 08:30:24Z raasch
	68	! netcdf_data_format is checked
	69	!
[449]	70	! 411 2009-12-11 14:15:58Z heinze
	71	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	72	! Initialization of large scale vertical motion (subsidence/ascent)
	73	!
	74	! 410 2009-12-04 17:05:40Z letzel
	75	! masked data output
	76	!
[392]	77	! 388 2009-09-23 09:40:33Z raasch
[388]	78	! Check profiles fpr prho and hyp.
[376]	79	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	80	! interval has been set, respective error message is included
[366]	81	! bc_lr_cyc and bc_ns_cyc are set,
[328]	82	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	83	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	84	! Coupling with independent precursor runs.
[264]	85	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	86	! Bugfix: pressure included for profile output
[240]	87	! Check pressure gradient conditions
[256]	88	! topography_grid_convention moved from user_check_parameters
	89	! 'single_street_canyon'
[367]	90	! Added shf* and qsws* to the list of available output data
[226]	91	!
	92	! 222 2009-01-12 16:04:16Z letzel
[217]	93	! +user_check_parameters
[213]	94	! Output of messages replaced by message handling routine.
[206]	95	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	96	! deleted __mpi2 directives
[222]	97	! Check that PALM is called with mrun -K parallel for coupling
[198]	98	!
	99	! 197 2008-09-16 15:29:03Z raasch
[177]	100	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	101	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	102	!
	103	! Strict grid matching along z is not needed for mg-solver.
[153]	104	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	105	! Case of reading data for recycling included in initializing_actions,
[197]	106	! check of turbulent_inflow and calculation of recycling_plane.
	107	! q*2 profile added
[139]	108	!
	109	! 138 2007-11-28 10:03:58Z letzel
[138]	110	! Plant canopy added
[132]	111	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	112	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	113	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	114	!
	115	! 109 2007-08-28 15:26:47Z letzel
[102]	116	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	117	! conditions for temperature and fluxes) in case of coupled runs.
	118	! +profiles for wp and w"e
[104]	119	! Bugfix: Error message concerning output of particle concentration (pc)
	120	! modified
[108]	121	! More checks and more default values for coupled runs
	122	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	123	! cloud_physics = .T.)
	124	! Rayleigh damping for ocean fixed.
[109]	125	! Check and, if necessary, set default value for dt_coupling
[98]	126	!
	127	! 97 2007-06-21 08:23:15Z raasch
[97]	128	! Initial salinity profile is calculated, salinity boundary conditions are
	129	! checked,
[94]	130	! z_max_do1d is checked only in case of ocean = .f.,
[97]	131	! +initial temperature and geostrophic velocity profiles for the ocean version,
	132	! use_pt_reference renamed use_reference
[77]	133	!
[90]	134	! 89 2007-05-25 12:08:31Z raasch
	135	! Check for user-defined profiles
	136	!
[77]	137	! 75 2007-03-22 09:54:05Z raasch
[51]	138	! "by_user" allowed as initializing action, -data_output_ts,
[63]	139	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	140	! and pt_reference are checked, moisture renamed humidity,
[72]	141	! output of precipitation amount/rate and roughnes length + check
[73]	142	! possible negative humidities are avoided in initial profile,
[75]	143	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	144	! revision added to run_description_header
[1]	145	!
[39]	146	! 20 2007-02-26 00:12:32Z raasch
	147	! Temperature and humidity gradients at top are now calculated for nzt+1,
	148	! top_heatflux and respective boundary condition bc_pt_t is checked
	149	!
[3]	150	! RCS Log replace by Id keyword, revision history cleaned up
	151	!
[1]	152	! Revision 1.61 2006/08/04 14:20:25 raasch
	153	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	154	! use_upstream_for_tke, default value for dt_dopts,
	155	! generation of file header moved from routines palm and header to here
	156	!
	157	! Revision 1.1 1997/08/26 06:29:23 raasch
	158	! Initial revision
	159	!
	160	!
	161	! Description:
	162	! ------------
	163	! Check control parameters and deduce further quantities.
	164	!------------------------------------------------------------------------------!
	165
	166	USE arrays_3d
	167	USE constants
	168	USE control_parameters
[264]	169	USE dvrp_variables
[1]	170	USE grid_variables
	171	USE indices
	172	USE model_1d
	173	USE netcdf_control
	174	USE particle_attributes
	175	USE pegrid
	176	USE profil_parameter
[411]	177	USE subsidence_mod
[1]	178	USE statistics
	179	USE transpose_indices
	180
	181	IMPLICIT NONE
	182
	183	CHARACTER (LEN=1) :: sq
	184	CHARACTER (LEN=6) :: var
	185	CHARACTER (LEN=7) :: unit
	186	CHARACTER (LEN=8) :: date
	187	CHARACTER (LEN=10) :: time
[102]	188	CHARACTER (LEN=40) :: coupling_string
[1]	189	CHARACTER (LEN=100) :: action
	190
[767]	191	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
	192	position, prec
[1]	193	LOGICAL :: found, ldum
[291]	194	REAL :: gradient, maxn, maxp, remote = 0.0, &
	195	simulation_time_since_reference
[1]	196
	197	!
	198	!-- Warning, if host is not set
	199	IF ( host(1:1) == ' ' ) THEN
[213]	200	message_string = '"host" is not set. Please check that environment ' // &
	201	'variable "localhost" & is set before running PALM'
[226]	202	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	203	ENDIF
	204
	205	!
[102]	206	!-- Check the coupling mode
	207	IF ( coupling_mode /= 'uncoupled' .AND. &
	208	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	209	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	210	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	211	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	212	ENDIF
	213
	214	!
[108]	215	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	216	IF ( coupling_mode /= 'uncoupled') THEN
[213]	217
[108]	218	IF ( dt_coupling == 9999999.9 ) THEN
[213]	219	message_string = 'dt_coupling is not set but required for coup' // &
	220	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	221	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	222	ENDIF
[213]	223
[206]	224	#if defined( __parallel )
[807]	225
	226	#if defined( __check )
	227
	228	!
	229	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	230	!-- program.
	231	!-- check_namelist_files will need the following information of the other
	232	!-- model (atmosphere/ocean).
	233	dt_coupling = remote
	234	dt_max = remote
	235	restart_time = remote
	236	dt_restart= remote
	237	simulation_time_since_reference = remote
	238	dx = remote
	239
	240	#endif
	241
[809]	242	#if ! defined( __check )
[667]	243	IF ( myid == 0 ) THEN
	244	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	245	ierr )
	246	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	247	status, ierr )
	248	ENDIF
	249	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	250	#endif
[108]	251	IF ( dt_coupling /= remote ) THEN
[213]	252	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	253	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	254	'dt_coupling_remote = ', remote
[226]	255	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	256	ENDIF
[109]	257	IF ( dt_coupling <= 0.0 ) THEN
[809]	258	#if ! defined( __check )
[667]	259	IF ( myid == 0 ) THEN
	260	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	261	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	262	status, ierr )
	263	ENDIF
	264	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	265	#endif
[109]	266	dt_coupling = MAX( dt_max, remote )
[213]	267	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	268	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	269	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	270	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	271	ENDIF
[809]	272	#if ! defined( __check )
[667]	273	IF ( myid == 0 ) THEN
	274	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	275	ierr )
	276	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	277	status, ierr )
	278	ENDIF
	279	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	280	#endif
[108]	281	IF ( restart_time /= remote ) THEN
[213]	282	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	283	'": restart_time = ', restart_time, '& is not equal to ', &
	284	'restart_time_remote = ', remote
[226]	285	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	286	ENDIF
[809]	287	#if ! defined( __check )
[667]	288	IF ( myid == 0 ) THEN
	289	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	290	ierr )
	291	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	292	status, ierr )
	293	ENDIF
	294	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	295	#endif
[108]	296	IF ( dt_restart /= remote ) THEN
[213]	297	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	298	'": dt_restart = ', dt_restart, '& is not equal to ', &
	299	'dt_restart_remote = ', remote
[226]	300	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	301	ENDIF
[213]	302
[291]	303	simulation_time_since_reference = end_time - coupling_start_time
[809]	304	#if ! defined( __check )
[667]	305	IF ( myid == 0 ) THEN
	306	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	307	14, comm_inter, ierr )
	308	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	309	status, ierr )
	310	ENDIF
	311	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	312	#endif
[291]	313	IF ( simulation_time_since_reference /= remote ) THEN
[213]	314	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	315	'": simulation_time_since_reference = ', &
	316	simulation_time_since_reference, '& is not equal to ', &
	317	'simulation_time_since_reference_remote = ', remote
[226]	318	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	319	ENDIF
[213]	320
[809]	321	#if ! defined( __check )
[667]	322	IF ( myid == 0 ) THEN
	323	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	324	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	325	status, ierr )
[108]	326	ENDIF
[667]	327	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	328
[807]	329	#endif
[667]	330	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	331
	332	IF ( dx < remote ) THEN
	333	WRITE( message_string, * ) 'coupling mode "', &
	334	TRIM( coupling_mode ), &
	335	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	336	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	337	ENDIF
	338
	339	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	340	WRITE( message_string, * ) 'coupling mode "', &
	341	TRIM( coupling_mode ), &
	342	'": Domain size in x-direction is not equal in ocean and atmosphere'
	343	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	344	ENDIF
	345
[108]	346	ENDIF
[213]	347
[809]	348	#if ! defined( __check )
[667]	349	IF ( myid == 0) THEN
	350	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	351	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	352	status, ierr )
[108]	353	ENDIF
[667]	354	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	355	#endif
[667]	356	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	357
	358	IF ( dy < remote ) THEN
	359	WRITE( message_string, * ) 'coupling mode "', &
	360	TRIM( coupling_mode ), &
	361	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	362	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	363	ENDIF
	364
	365	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	366	WRITE( message_string, * ) 'coupling mode "', &
	367	TRIM( coupling_mode ), &
	368	'": Domain size in y-direction is not equal in ocean and atmosphere'
	369	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	370	ENDIF
	371
	372	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	373	WRITE( message_string, * ) 'coupling mode "', &
	374	TRIM( coupling_mode ), &
	375	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	376	' atmosphere'
	377	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	378	ENDIF
	379
	380	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	381	WRITE( message_string, * ) 'coupling mode "', &
	382	TRIM( coupling_mode ), &
	383	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	384	' atmosphere'
	385	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	386	ENDIF
	387
[108]	388	ENDIF
[222]	389	#else
	390	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	391	' ''mrun -K parallel'''
[226]	392	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	393	#endif
	394	ENDIF
	395
[809]	396	#if defined( __parallel ) && ! defined ( __check )
[108]	397	!
	398	!-- Exchange via intercommunicator
[667]	399	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	400	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	401	ierr )
[667]	402	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	403	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	404	comm_inter, status, ierr )
[108]	405	ENDIF
[667]	406	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	407
[108]	408	#endif
	409
	410
	411	!
[1]	412	!-- Generate the file header which is used as a header for most of PALM's
	413	!-- output files
	414	CALL DATE_AND_TIME( date, time )
	415	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	416	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	417	IF ( coupling_mode == 'uncoupled' ) THEN
	418	coupling_string = ''
	419	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	420	coupling_string = ' coupled (atmosphere)'
	421	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	422	coupling_string = ' coupled (ocean)'
	423	ENDIF
[1]	424
[102]	425	WRITE ( run_description_header, &
	426	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	427	TRIM( version ), TRIM( revision ), 'run: ', &
	428	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	429	'host: ', TRIM( host ), run_date, run_time
[1]	430
	431	!
[63]	432	!-- Check the general loop optimization method
	433	IF ( loop_optimization == 'default' ) THEN
	434	IF ( host(1:3) == 'nec' ) THEN
	435	loop_optimization = 'vector'
	436	ELSE
	437	loop_optimization = 'cache'
	438	ENDIF
	439	ENDIF
	440	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	441	.AND. loop_optimization /= 'vector' ) THEN
[213]	442	message_string = 'illegal value given for loop_optimization: "' // &
	443	TRIM( loop_optimization ) // '"'
[226]	444	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	445	ENDIF
	446
	447	!
[1]	448	!-- Check topography setting (check for illegal parameter combinations)
	449	IF ( topography /= 'flat' ) THEN
	450	action = ' '
	451	IF ( scalar_advec /= 'pw-scheme' ) THEN
	452	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	453	ENDIF
	454	IF ( momentum_advec /= 'pw-scheme' ) THEN
	455	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	456	ENDIF
[51]	457	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	458	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	459	ENDIF
[114]	460	IF ( psolver == 'sor' ) THEN
[1]	461	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	462	ENDIF
	463	IF ( sloping_surface ) THEN
	464	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	465	ENDIF
	466	IF ( galilei_transformation ) THEN
	467	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	468	ENDIF
	469	IF ( cloud_physics ) THEN
	470	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	471	ENDIF
	472	IF ( cloud_droplets ) THEN
	473	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	474	ENDIF
	475	IF ( .NOT. prandtl_layer ) THEN
	476	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	477	ENDIF
	478	IF ( action /= ' ' ) THEN
[213]	479	message_string = 'a non-flat topography does not allow ' // &
	480	TRIM( action )
[226]	481	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	482	ENDIF
[667]	483	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	484	THEN
	485	message_string = 'topography is still not allowed with ' // &
	486	'momentum_advec = "' // TRIM( momentum_advec ) // &
	487	'"or scalar_advec = "' // TRIM( scalar_advec ) //'"'
	488	! message number still needs modification
	489	CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 )
	490	END IF
	491
[256]	492	!
	493	!-- In case of non-flat topography, check whether the convention how to
	494	!-- define the topography grid has been set correctly, or whether the default
	495	!-- is applicable. If this is not possible, abort.
	496	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	497	IF ( TRIM( topography ) /= 'single_building' .AND. &
	498	TRIM( topography ) /= 'single_street_canyon' .AND. &
	499	TRIM( topography ) /= 'read_from_file' ) THEN
	500	!-- The default value is not applicable here, because it is only valid
	501	!-- for the two standard cases 'single_building' and 'read_from_file'
	502	!-- defined in init_grid.
	503	WRITE( message_string, * ) &
	504	'The value for "topography_grid_convention" ', &
	505	'is not set. Its default value is & only valid for ', &
	506	'"topography" = ''single_building'', ', &
	507	'''single_street_canyon'' & or ''read_from_file''.', &
	508	' & Choose ''cell_edge'' or ''cell_center''.'
	509	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	510	ELSE
	511	!-- The default value is applicable here.
	512	!-- Set convention according to topography.
	513	IF ( TRIM( topography ) == 'single_building' .OR. &
	514	TRIM( topography ) == 'single_street_canyon' ) THEN
	515	topography_grid_convention = 'cell_edge'
	516	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	517	topography_grid_convention = 'cell_center'
	518	ENDIF
	519	ENDIF
	520	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	521	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	522	WRITE( message_string, * ) &
	523	'The value for "topography_grid_convention" is ', &
	524	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	525	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	526	ENDIF
	527
[1]	528	ENDIF
[94]	529
[1]	530	!
[94]	531	!-- Check ocean setting
	532	IF ( ocean ) THEN
[332]	533
[94]	534	action = ' '
	535	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	536	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	537	ENDIF
[97]	538	IF ( momentum_advec == 'ups-scheme' ) THEN
	539	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	540	ENDIF
[94]	541	IF ( action /= ' ' ) THEN
[213]	542	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	543	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	544	ENDIF
	545
[332]	546	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	547	TRIM( coupling_char ) == '_O' ) THEN
[343]	548
[94]	549	!
[332]	550	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	551	!-- ocean run (this setting is done via mrun-option -y)
[343]	552
[291]	553	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	554	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	555	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	556
[291]	557	ENDIF
	558
	559	!
[1]	560	!-- Check whether there are any illegal values
	561	!-- Pressure solver:
	562	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	563	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	564	message_string = 'unknown solver for perturbation pressure: psolver' // &
	565	' = "' // TRIM( psolver ) // '"'
[226]	566	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	567	ENDIF
	568
	569	#if defined( __parallel )
	570	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	571	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	572	'for a 1d domain-decomposition along x & please do' // &
	573	' not set npey/=1 in the parameter file'
[226]	574	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	575	ENDIF
[181]	576	IF ( psolver == 'poisfft_hybrid' .AND. &
	577	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	578	psolver == 'multigrid' .AND. &
	579	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	580	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	581	'work for subdomains with unequal size & please ' // &
	582	'set grid_matching = ''strict'' in the parameter file'
[226]	583	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	584	ENDIF
	585	#else
	586	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	587	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	588	' for a parallel environment'
[226]	589	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	590	ENDIF
	591	#endif
	592
	593	IF ( psolver == 'multigrid' ) THEN
	594	IF ( cycle_mg == 'w' ) THEN
	595	gamma_mg = 2
	596	ELSEIF ( cycle_mg == 'v' ) THEN
	597	gamma_mg = 1
	598	ELSE
[213]	599	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	600	TRIM( cycle_mg ) // '"'
[226]	601	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	602	ENDIF
	603	ENDIF
	604
	605	IF ( fft_method /= 'singleton-algorithm' .AND. &
	606	fft_method /= 'temperton-algorithm' .AND. &
	607	fft_method /= 'system-specific' ) THEN
[213]	608	message_string = 'unknown fft-algorithm: fft_method = "' // &
	609	TRIM( fft_method ) // '"'
[226]	610	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	611	ENDIF
[667]	612
	613	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	614	.NOT. call_psolver_at_all_substeps ) THEN
[667]	615	message_string = 'psolver must be called at each RK3 substep when "'//&
	616	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	617	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	618	END IF
[1]	619	!
	620	!-- Advection schemes:
[673]	621	!
	622	!-- Set the LOGICALS to enhance the performance.
	623	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	624	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	625
[667]	626	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
	627	momentum_advec /= 'ups-scheme' ) THEN
[214]	628	message_string = 'unknown advection scheme: momentum_advec = "' // &
	629	TRIM( momentum_advec ) // '"'
[226]	630	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	631	ENDIF
[667]	632	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	633	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
	634	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
	635	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
	636	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
	637	message_string = 'momentum_advec or scalar_advec = "' &
	638	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	639	TRIM( timestep_scheme ) // '"'
[226]	640	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	641	ENDIF
[667]	642	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
	643	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
[214]	644	message_string = 'unknown advection scheme: scalar_advec = "' // &
	645	TRIM( scalar_advec ) // '"'
[226]	646	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	647	ENDIF
	648
	649	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	650	use_upstream_for_tke = .TRUE.
[214]	651	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	652	'use_sgs_for_particles = .TRUE.'
[226]	653	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	654	ENDIF
	655
	656	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	657	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	658	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	659	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	660	ENDIF
	661
	662	!
	663	!-- Timestep schemes:
	664	SELECT CASE ( TRIM( timestep_scheme ) )
	665
	666	CASE ( 'euler' )
	667	intermediate_timestep_count_max = 1
	668	asselin_filter_factor = 0.0
	669
	670	CASE ( 'leapfrog', 'leapfrog+euler' )
	671	intermediate_timestep_count_max = 1
	672
	673	CASE ( 'runge-kutta-2' )
	674	intermediate_timestep_count_max = 2
	675	asselin_filter_factor = 0.0
	676
	677	CASE ( 'runge-kutta-3' )
	678	intermediate_timestep_count_max = 3
	679	asselin_filter_factor = 0.0
	680
	681	CASE DEFAULT
[214]	682	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	683	TRIM( timestep_scheme ) // '"'
[226]	684	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	685
	686	END SELECT
	687
[63]	688	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	689	THEN
[214]	690	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	691	'" & does not work with timestep_scheme "' // &
	692	TRIM( timestep_scheme ) // '"'
[226]	693	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	694	ENDIF
	695
[667]	696	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	697	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	698	message_string = 'momentum advection scheme "' // &
	699	TRIM( momentum_advec ) // '" & does not work with ' // &
	700	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	701	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	702	ENDIF
	703
[147]	704	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	705	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	706	!
[214]	707	!-- No restart run: several initialising actions are possible
[1]	708	action = initializing_actions
	709	DO WHILE ( TRIM( action ) /= '' )
	710	position = INDEX( action, ' ' )
	711	SELECT CASE ( action(1:position-1) )
	712
	713	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	714	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	715	action = action(position+1:)
	716
	717	CASE DEFAULT
[214]	718	message_string = 'initializing_action = "' // &
	719	TRIM( action ) // '" unkown or not allowed'
[226]	720	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	721
	722	END SELECT
	723	ENDDO
	724	ENDIF
[214]	725
[680]	726	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	727	conserve_volume_flow ) THEN
	728	message_string = 'initializing_actions = "initialize_vortex"' // &
	729	' ist not allowed with conserve_volume_flow = .T.'
	730	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	731	ENDIF
	732
	733
[1]	734	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	735	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	736	message_string = 'initializing_actions = "set_constant_profiles"' // &
	737	' and "set_1d-model_profiles" are not allowed ' // &
	738	'simultaneously'
[226]	739	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	740	ENDIF
[214]	741
[46]	742	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	743	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	744	message_string = 'initializing_actions = "set_constant_profiles"' // &
	745	' and "by_user" are not allowed simultaneously'
[226]	746	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	747	ENDIF
[214]	748
[46]	749	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	750	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	751	message_string = 'initializing_actions = "by_user" and ' // &
	752	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	753	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	754	ENDIF
[1]	755
[75]	756	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	757	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	758	'not allowed with humidity = ', humidity
[226]	759	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	760	ENDIF
	761
[72]	762	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	763	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	764	'not allowed with cloud_physics = ', cloud_physics
[226]	765	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	766	ENDIF
	767
[75]	768	IF ( humidity .AND. sloping_surface ) THEN
[214]	769	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	770	'are not allowed simultaneously'
[226]	771	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	772	ENDIF
	773
[75]	774	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	775	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	776	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	777	ENDIF
	778
[75]	779	IF ( passive_scalar .AND. humidity ) THEN
[214]	780	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	781	'is not allowed simultaneously'
[226]	782	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	783	ENDIF
	784
	785	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	786	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	787	' = .TRUE.'
[226]	788	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	789	ENDIF
	790
	791	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	792	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	793	'" found for parameter grid_matching'
[226]	794	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	795	ENDIF
	796
[138]	797	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	798	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	799	'coefficient & given value is drag_coefficient = 0.0'
[226]	800	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	801	ENDIF
	802
[1]	803	!
	804	!-- In case of no model continuation run, check initialising parameters and
	805	!-- deduce further quantities
	806	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	807
	808	!
[767]	809	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	810	pt_init = pt_surface
[94]	811	IF ( humidity ) q_init = q_surface
	812	IF ( ocean ) sa_init = sa_surface
	813	IF ( passive_scalar ) q_init = s_surface
[138]	814	IF ( plant_canopy ) lad = 0.0
[1]	815
	816	!
	817	!--
	818	!-- If required, compute initial profile of the geostrophic wind
	819	!-- (component ug)
	820	i = 1
	821	gradient = 0.0
[97]	822
	823	IF ( .NOT. ocean ) THEN
	824
	825	ug_vertical_gradient_level_ind(1) = 0
	826	ug(0) = ug_surface
	827	DO k = 1, nzt+1
[177]	828	IF ( i < 11 ) THEN
	829	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	830	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	831	gradient = ug_vertical_gradient(i) / 100.0
	832	ug_vertical_gradient_level_ind(i) = k - 1
	833	i = i + 1
[1]	834	ENDIF
[177]	835	ENDIF
[97]	836	IF ( gradient /= 0.0 ) THEN
	837	IF ( k /= 1 ) THEN
	838	ug(k) = ug(k-1) + dzu(k) * gradient
	839	ELSE
	840	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	841	ENDIF
[1]	842	ELSE
[97]	843	ug(k) = ug(k-1)
[1]	844	ENDIF
[97]	845	ENDDO
[1]	846
[97]	847	ELSE
	848
	849	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	850	ug(nzt+1) = ug_surface
[667]	851	DO k = nzt, nzb, -1
[177]	852	IF ( i < 11 ) THEN
	853	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	854	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	855	gradient = ug_vertical_gradient(i) / 100.0
	856	ug_vertical_gradient_level_ind(i) = k + 1
	857	i = i + 1
[97]	858	ENDIF
	859	ENDIF
	860	IF ( gradient /= 0.0 ) THEN
	861	IF ( k /= nzt ) THEN
	862	ug(k) = ug(k+1) - dzu(k+1) * gradient
	863	ELSE
	864	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	865	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	866	ENDIF
	867	ELSE
	868	ug(k) = ug(k+1)
	869	ENDIF
	870	ENDDO
	871
	872	ENDIF
	873
[1]	874	!
[767]	875	!-- In case of no given gradients for ug, choose a zero gradient
[97]	876	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	877	ug_vertical_gradient_level(1) = 0.0
	878	ENDIF
	879
	880	!
	881	!--
	882	!-- If required, compute initial profile of the geostrophic wind
	883	!-- (component vg)
	884	i = 1
	885	gradient = 0.0
[97]	886
	887	IF ( .NOT. ocean ) THEN
	888
	889	vg_vertical_gradient_level_ind(1) = 0
	890	vg(0) = vg_surface
	891	DO k = 1, nzt+1
[177]	892	IF ( i < 11 ) THEN
	893	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	894	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	895	gradient = vg_vertical_gradient(i) / 100.0
	896	vg_vertical_gradient_level_ind(i) = k - 1
	897	i = i + 1
[1]	898	ENDIF
	899	ENDIF
[97]	900	IF ( gradient /= 0.0 ) THEN
	901	IF ( k /= 1 ) THEN
	902	vg(k) = vg(k-1) + dzu(k) * gradient
	903	ELSE
	904	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	905	ENDIF
[1]	906	ELSE
[97]	907	vg(k) = vg(k-1)
[1]	908	ENDIF
[97]	909	ENDDO
[1]	910
[97]	911	ELSE
	912
[121]	913	vg_vertical_gradient_level_ind(1) = nzt+1
	914	vg(nzt+1) = vg_surface
[667]	915	DO k = nzt, nzb, -1
[177]	916	IF ( i < 11 ) THEN
	917	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	918	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	919	gradient = vg_vertical_gradient(i) / 100.0
	920	vg_vertical_gradient_level_ind(i) = k + 1
	921	i = i + 1
[97]	922	ENDIF
	923	ENDIF
	924	IF ( gradient /= 0.0 ) THEN
	925	IF ( k /= nzt ) THEN
	926	vg(k) = vg(k+1) - dzu(k+1) * gradient
	927	ELSE
	928	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	929	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	930	ENDIF
	931	ELSE
	932	vg(k) = vg(k+1)
	933	ENDIF
	934	ENDDO
	935
	936	ENDIF
	937
[1]	938	!
[767]	939	!-- In case of no given gradients for vg, choose a zero gradient
[97]	940	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	941	vg_vertical_gradient_level(1) = 0.0
	942	ENDIF
	943
	944	!
[767]	945	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	946	!-- interpolate them from wind profile data (if given)
	947	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	948
	949	u_init = ug
	950	v_init = vg
	951
	952	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	953
	954	IF ( uv_heights(1) /= 0.0 ) THEN
	955	message_string = 'uv_heights(1) must be 0.0'
	956	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	957	ENDIF
	958
	959	use_prescribed_profile_data = .TRUE.
	960
	961	kk = 1
	962	u_init(0) = 0.0
	963	v_init(0) = 0.0
	964
	965	DO k = 1, nz+1
	966
	967	IF ( kk < 100 ) THEN
	968	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	969	kk = kk + 1
	970	IF ( kk == 100 ) EXIT
	971	ENDDO
	972	ENDIF
	973
[774]	974	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	975	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	976	( uv_heights(kk+1) - uv_heights(kk) ) * &
	977	( u_profile(kk+1) - u_profile(kk) )
	978	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	979	( uv_heights(kk+1) - uv_heights(kk) ) * &
	980	( v_profile(kk+1) - v_profile(kk) )
	981	ELSE
	982	u_init(k) = u_profile(kk)
	983	v_init(k) = v_profile(kk)
	984	ENDIF
	985
	986	ENDDO
	987
	988	ELSE
	989
	990	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	991	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	992
	993	ENDIF
	994
	995	!
[94]	996	!-- Compute initial temperature profile using the given temperature gradients
[1]	997	i = 1
	998	gradient = 0.0
[94]	999
	1000	IF ( .NOT. ocean ) THEN
	1001
	1002	pt_vertical_gradient_level_ind(1) = 0
	1003	DO k = 1, nzt+1
[177]	1004	IF ( i < 11 ) THEN
	1005	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1006	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1007	gradient = pt_vertical_gradient(i) / 100.0
	1008	pt_vertical_gradient_level_ind(i) = k - 1
	1009	i = i + 1
[1]	1010	ENDIF
	1011	ENDIF
[94]	1012	IF ( gradient /= 0.0 ) THEN
	1013	IF ( k /= 1 ) THEN
	1014	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1015	ELSE
	1016	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	1017	ENDIF
[1]	1018	ELSE
[94]	1019	pt_init(k) = pt_init(k-1)
[1]	1020	ENDIF
[94]	1021	ENDDO
[1]	1022
[94]	1023	ELSE
	1024
	1025	pt_vertical_gradient_level_ind(1) = nzt+1
	1026	DO k = nzt, 0, -1
[177]	1027	IF ( i < 11 ) THEN
	1028	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1029	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1030	gradient = pt_vertical_gradient(i) / 100.0
	1031	pt_vertical_gradient_level_ind(i) = k + 1
	1032	i = i + 1
[94]	1033	ENDIF
	1034	ENDIF
	1035	IF ( gradient /= 0.0 ) THEN
	1036	IF ( k /= nzt ) THEN
	1037	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1038	ELSE
	1039	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1040	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1041	ENDIF
	1042	ELSE
	1043	pt_init(k) = pt_init(k+1)
	1044	ENDIF
	1045	ENDDO
	1046
	1047	ENDIF
	1048
[1]	1049	!
	1050	!-- In case of no given temperature gradients, choose gradient of neutral
	1051	!-- stratification
[94]	1052	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1053	pt_vertical_gradient_level(1) = 0.0
	1054	ENDIF
	1055
	1056	!
[94]	1057	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1058	!-- boundary condition
[19]	1059	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1060
	1061	!
	1062	!-- If required, compute initial humidity or scalar profile using the given
	1063	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1064	!-- values of the scalar parameters on humidity parameters
	1065	IF ( passive_scalar ) THEN
	1066	bc_q_b = bc_s_b
	1067	bc_q_t = bc_s_t
	1068	q_surface = s_surface
	1069	q_surface_initial_change = s_surface_initial_change
	1070	q_vertical_gradient = s_vertical_gradient
	1071	q_vertical_gradient_level = s_vertical_gradient_level
	1072	surface_waterflux = surface_scalarflux
[407]	1073	wall_humidityflux = wall_scalarflux
[1]	1074	ENDIF
	1075
[75]	1076	IF ( humidity .OR. passive_scalar ) THEN
[1]	1077
	1078	i = 1
	1079	gradient = 0.0
	1080	q_vertical_gradient_level_ind(1) = 0
	1081	DO k = 1, nzt+1
[177]	1082	IF ( i < 11 ) THEN
	1083	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1084	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1085	gradient = q_vertical_gradient(i) / 100.0
	1086	q_vertical_gradient_level_ind(i) = k - 1
	1087	i = i + 1
[1]	1088	ENDIF
	1089	ENDIF
	1090	IF ( gradient /= 0.0 ) THEN
	1091	IF ( k /= 1 ) THEN
	1092	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1093	ELSE
	1094	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1095	ENDIF
	1096	ELSE
	1097	q_init(k) = q_init(k-1)
	1098	ENDIF
[72]	1099	!
	1100	!-- Avoid negative humidities
	1101	IF ( q_init(k) < 0.0 ) THEN
	1102	q_init(k) = 0.0
	1103	ENDIF
[1]	1104	ENDDO
	1105
	1106	!
	1107	!-- In case of no given humidity gradients, choose zero gradient
	1108	!-- conditions
	1109	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1110	q_vertical_gradient_level(1) = 0.0
	1111	ENDIF
	1112
	1113	!
	1114	!-- Store humidity gradient at the top boundary for possile Neumann
	1115	!-- boundary condition
[19]	1116	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1117
	1118	ENDIF
	1119
[94]	1120	!
	1121	!-- If required, compute initial salinity profile using the given salinity
	1122	!-- gradients
	1123	IF ( ocean ) THEN
	1124
	1125	i = 1
	1126	gradient = 0.0
	1127
	1128	sa_vertical_gradient_level_ind(1) = nzt+1
	1129	DO k = nzt, 0, -1
[177]	1130	IF ( i < 11 ) THEN
	1131	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1132	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1133	gradient = sa_vertical_gradient(i) / 100.0
	1134	sa_vertical_gradient_level_ind(i) = k + 1
	1135	i = i + 1
[94]	1136	ENDIF
	1137	ENDIF
	1138	IF ( gradient /= 0.0 ) THEN
	1139	IF ( k /= nzt ) THEN
	1140	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1141	ELSE
	1142	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1143	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1144	ENDIF
	1145	ELSE
	1146	sa_init(k) = sa_init(k+1)
	1147	ENDIF
	1148	ENDDO
	1149
	1150	ENDIF
	1151
[138]	1152	!
[388]	1153	!-- If required compute the profile of leaf area density used in the plant
	1154	!-- canopy model
[138]	1155	IF ( plant_canopy ) THEN
	1156
	1157	i = 1
	1158	gradient = 0.0
[1]	1159
[138]	1160	IF ( .NOT. ocean ) THEN
[153]	1161
	1162	lad(0) = lad_surface
[138]	1163
	1164	lad_vertical_gradient_level_ind(1) = 0
	1165	DO k = 1, pch_index
[177]	1166	IF ( i < 11 ) THEN
	1167	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1168	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1169	gradient = lad_vertical_gradient(i)
	1170	lad_vertical_gradient_level_ind(i) = k - 1
	1171	i = i + 1
[138]	1172	ENDIF
	1173	ENDIF
	1174	IF ( gradient /= 0.0 ) THEN
	1175	IF ( k /= 1 ) THEN
	1176	lad(k) = lad(k-1) + dzu(k) * gradient
	1177	ELSE
	1178	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1179	ENDIF
	1180	ELSE
	1181	lad(k) = lad(k-1)
	1182	ENDIF
	1183	ENDDO
	1184
	1185	ENDIF
	1186
[1]	1187	!
[388]	1188	!-- In case of no given leaf area density gradients, choose a vanishing
	1189	!-- gradient
[138]	1190	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1191	lad_vertical_gradient_level(1) = 0.0
	1192	ENDIF
	1193
	1194	ENDIF
	1195
	1196	ENDIF
[411]	1197
	1198	!
	1199	!-- Initialize large scale subsidence if required
[580]	1200	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1201	large_scale_subsidence = .TRUE.
	1202	CALL init_w_subsidence
	1203	END IF
	1204
[138]	1205
[667]	1206
[138]	1207	!
[1]	1208	!-- Compute Coriolis parameter
	1209	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1210	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1211
	1212	!
[97]	1213	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1214	!-- set the reference temperature equal to the surface temperature.
	1215	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1216
	1217	!
[97]	1218	!-- Reference value has to be used in buoyancy terms
	1219	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1220
	1221	!
	1222	!-- Sign of buoyancy/stability terms
	1223	IF ( ocean ) atmos_ocean_sign = -1.0
	1224
	1225	!
[108]	1226	!-- Ocean version must use flux boundary conditions at the top
	1227	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1228	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1229	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1230	ENDIF
[97]	1231
	1232	!
[1]	1233	!-- In case of a given slope, compute the relevant quantities
	1234	IF ( alpha_surface /= 0.0 ) THEN
	1235	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1236	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1237	' ) must be < 90.0'
[226]	1238	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1239	ENDIF
	1240	sloping_surface = .TRUE.
	1241	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1242	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1243	ENDIF
	1244
	1245	!
	1246	!-- Check time step and cfl_factor
	1247	IF ( dt /= -1.0 ) THEN
	1248	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1249	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1250	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1251	ENDIF
	1252	dt_3d = dt
	1253	dt_fixed = .TRUE.
	1254	ENDIF
	1255
	1256	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1257	IF ( cfl_factor == -1.0 ) THEN
	1258	IF ( momentum_advec == 'ups-scheme' .OR. &
	1259	scalar_advec == 'ups-scheme' ) THEN
	1260	cfl_factor = 0.8
	1261	ELSE
	1262	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1263	cfl_factor = 0.8
	1264	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1265	cfl_factor = 0.9
	1266	ELSE
	1267	cfl_factor = 0.1
	1268	ENDIF
	1269	ENDIF
	1270	ELSE
[215]	1271	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1272	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1273	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1274	ENDIF
	1275	ENDIF
	1276
	1277	!
	1278	!-- Store simulated time at begin
	1279	simulated_time_at_begin = simulated_time
	1280
	1281	!
[291]	1282	!-- Store reference time for coupled runs and change the coupling flag,
	1283	!-- if ...
	1284	IF ( simulated_time == 0.0 ) THEN
	1285	IF ( coupling_start_time == 0.0 ) THEN
	1286	time_since_reference_point = 0.0
	1287	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1288	run_coupled = .FALSE.
	1289	ENDIF
	1290	ENDIF
	1291
	1292	!
[1]	1293	!-- Set wind speed in the Galilei-transformed system
	1294	IF ( galilei_transformation ) THEN
	1295	IF ( use_ug_for_galilei_tr .AND. &
	1296	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1297	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1298	u_gtrans = ug_surface
	1299	v_gtrans = vg_surface
	1300	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1301	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1302	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1303	' with galilei transformation'
[226]	1304	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1305	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1306	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1307	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1308	' with galilei transformation'
[226]	1309	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1310	ELSE
[215]	1311	message_string = 'variable translation speed used for galilei-' // &
	1312	'transformation, which may cause & instabilities in stably ' // &
	1313	'stratified regions'
[226]	1314	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1315	ENDIF
	1316	ENDIF
	1317
	1318	!
	1319	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1320	!-- fluxes have to be used in the diffusion-terms
	1321	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1322
	1323	!
	1324	!-- Check boundary conditions and set internal variables:
	1325	!-- Lateral boundary conditions
[73]	1326	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1327	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1328	message_string = 'unknown boundary condition: bc_lr = "' // &
	1329	TRIM( bc_lr ) // '"'
[226]	1330	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1331	ENDIF
[73]	1332	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1333	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1334	message_string = 'unknown boundary condition: bc_ns = "' // &
	1335	TRIM( bc_ns ) // '"'
[226]	1336	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1337	ENDIF
	1338
	1339	!
[366]	1340	!-- Internal variables used for speed optimization in if clauses
[707]	1341	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1342	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1343	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1344	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1345	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1346	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1347
	1348	!
[1]	1349	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1350	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1351	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1352	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1353	IF ( psolver /= 'multigrid' ) THEN
[215]	1354	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1355	'psolver = "' // TRIM( psolver ) // '"'
[226]	1356	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1357	ENDIF
[667]	1358	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1359	momentum_advec /= 'ws-scheme') THEN
[215]	1360	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1361	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1362	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1363	ENDIF
[667]	1364	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1365	scalar_advec /= 'ws-scheme' ) THEN
[215]	1366	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1367	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1368	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1369	ENDIF
[667]	1370	IF ( (scalar_advec == 'ws-scheme' .OR. momentum_advec == 'ws-scheme' ) &
	1371	.AND. loop_optimization == 'vector' ) THEN
	1372	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1373	'loop_optimization = vector and ' // &
	1374	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
	1375	! The error message number still needs modification.
	1376	CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 )
	1377	END IF
[1]	1378	IF ( galilei_transformation ) THEN
[215]	1379	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1380	'galilei_transformation = .T.'
[226]	1381	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1382	ENDIF
	1383	ENDIF
	1384
	1385	!
	1386	!-- Bottom boundary condition for the turbulent Kinetic energy
	1387	IF ( bc_e_b == 'neumann' ) THEN
	1388	ibc_e_b = 1
	1389	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1390	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1391	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1392	ENDIF
	1393	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1394	ibc_e_b = 2
	1395	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1396	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1397	TRIM( bc_e_b ) // '"'
[226]	1398	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1399	ENDIF
	1400	IF ( .NOT. prandtl_layer ) THEN
	1401	bc_e_b = 'neumann'
	1402	ibc_e_b = 1
[215]	1403	message_string = 'boundary condition bc_e_b changed to "' // &
	1404	TRIM( bc_e_b ) // '"'
[226]	1405	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1406	ENDIF
	1407	ELSE
[215]	1408	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1409	TRIM( bc_e_b ) // '"'
[226]	1410	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1411	ENDIF
	1412
	1413	!
	1414	!-- Boundary conditions for perturbation pressure
	1415	IF ( bc_p_b == 'dirichlet' ) THEN
	1416	ibc_p_b = 0
	1417	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1418	ibc_p_b = 1
	1419	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1420	ibc_p_b = 2
	1421	ELSE
[215]	1422	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1423	TRIM( bc_p_b ) // '"'
[226]	1424	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1425	ENDIF
	1426	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1427	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1428	'" not allowed with prandtl_layer = .FALSE.'
[226]	1429	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1430	ENDIF
	1431	IF ( bc_p_t == 'dirichlet' ) THEN
	1432	ibc_p_t = 0
	1433	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1434	ibc_p_t = 1
	1435	ELSE
[215]	1436	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1437	TRIM( bc_p_t ) // '"'
[226]	1438	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1439	ENDIF
	1440
	1441	!
	1442	!-- Boundary conditions for potential temperature
[102]	1443	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1444	ibc_pt_b = 2
[1]	1445	ELSE
[102]	1446	IF ( bc_pt_b == 'dirichlet' ) THEN
	1447	ibc_pt_b = 0
	1448	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1449	ibc_pt_b = 1
	1450	ELSE
[215]	1451	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1452	TRIM( bc_pt_b ) // '"'
[226]	1453	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1454	ENDIF
	1455	ENDIF
[102]	1456
[1]	1457	IF ( bc_pt_t == 'dirichlet' ) THEN
	1458	ibc_pt_t = 0
	1459	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1460	ibc_pt_t = 1
[19]	1461	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1462	ibc_pt_t = 2
[1]	1463	ELSE
[215]	1464	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1465	TRIM( bc_pt_t ) // '"'
[226]	1466	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1467	ENDIF
	1468
[20]	1469	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1470	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1471	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1472	top_momentumflux_v /= 9999999.9 ) THEN
	1473	constant_top_momentumflux = .TRUE.
	1474	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1475	top_momentumflux_v == 9999999.9 ) ) THEN
	1476	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1477	'must be set'
[226]	1478	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1479	ENDIF
[1]	1480
	1481	!
	1482	!-- A given surface temperature implies Dirichlet boundary condition for
	1483	!-- temperature. In this case specification of a constant heat flux is
	1484	!-- forbidden.
	1485	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1486	surface_heatflux /= 0.0 ) THEN
[215]	1487	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1488	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1489	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1490	ENDIF
	1491	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1492	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1493	'wed with pt_surface_initial_change (/=0) = ', &
	1494	pt_surface_initial_change
[226]	1495	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1496	ENDIF
	1497
	1498	!
[19]	1499	!-- A given temperature at the top implies Dirichlet boundary condition for
	1500	!-- temperature. In this case specification of a constant heat flux is
	1501	!-- forbidden.
	1502	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1503	top_heatflux /= 0.0 ) THEN
[215]	1504	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1505	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1506	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1507	ENDIF
	1508
	1509	!
[95]	1510	!-- Boundary conditions for salinity
	1511	IF ( ocean ) THEN
	1512	IF ( bc_sa_t == 'dirichlet' ) THEN
	1513	ibc_sa_t = 0
	1514	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1515	ibc_sa_t = 1
	1516	ELSE
[215]	1517	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1518	TRIM( bc_sa_t ) // '"'
[226]	1519	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1520	ENDIF
	1521
	1522	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1523	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1524	message_string = 'boundary condition: bc_sa_t = "' // &
	1525	TRIM( bc_sa_t ) // '" requires to set ' // &
	1526	'top_salinityflux'
[226]	1527	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1528	ENDIF
[95]	1529
	1530	!
	1531	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1532	!-- salinity. In this case specification of a constant salinity flux is
	1533	!-- forbidden.
	1534	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1535	top_salinityflux /= 0.0 ) THEN
[215]	1536	message_string = 'boundary condition: bc_sa_t = "' // &
	1537	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1538	'constant_top_salinityflux = .TRUE.'
[226]	1539	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1540	ENDIF
	1541
	1542	ENDIF
	1543
	1544	!
[75]	1545	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1546	!-- water content / scalar
[75]	1547	IF ( humidity .OR. passive_scalar ) THEN
	1548	IF ( humidity ) THEN
[1]	1549	sq = 'q'
	1550	ELSE
	1551	sq = 's'
	1552	ENDIF
	1553	IF ( bc_q_b == 'dirichlet' ) THEN
	1554	ibc_q_b = 0
	1555	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1556	ibc_q_b = 1
	1557	ELSE
[215]	1558	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1559	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1560	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1561	ENDIF
	1562	IF ( bc_q_t == 'dirichlet' ) THEN
	1563	ibc_q_t = 0
	1564	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1565	ibc_q_t = 1
	1566	ELSE
[215]	1567	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1568	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1569	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1570	ENDIF
	1571
[600]	1572	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1573
	1574	!
	1575	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1576	!-- humidity. In this case specification of a constant water flux is
[1]	1577	!-- forbidden.
	1578	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1579	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1580	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1581	'th prescribed surface flux'
[226]	1582	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1583	ENDIF
	1584	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1585	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1586	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1587	q_surface_initial_change
[226]	1588	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1589	ENDIF
	1590
	1591	ENDIF
	1592
	1593	!
	1594	!-- Boundary conditions for horizontal components of wind speed
	1595	IF ( bc_uv_b == 'dirichlet' ) THEN
	1596	ibc_uv_b = 0
	1597	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1598	ibc_uv_b = 1
	1599	IF ( prandtl_layer ) THEN
[215]	1600	message_string = 'boundary condition: bc_uv_b = "' // &
	1601	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1602	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1603	ENDIF
	1604	ELSE
[215]	1605	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1606	TRIM( bc_uv_b ) // '"'
[226]	1607	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1608	ENDIF
[667]	1609	!
	1610	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1611	!-- assigned with the u and v values of the ocean surface
	1612	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1613	ibc_uv_b = 2
	1614	ENDIF
[215]	1615
[108]	1616	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1617	bc_uv_t = 'neumann'
[1]	1618	ibc_uv_t = 1
	1619	ELSE
[132]	1620	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1621	ibc_uv_t = 0
[767]	1622	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1623	!
	1624	!-- Velocities for the initial u,v-profiles are set zero at the top
	1625	!-- in case of dirichlet_0 conditions
	1626	u_init(nzt+1) = 0.0
	1627	v_init(nzt+1) = 0.0
	1628	ENDIF
[108]	1629	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1630	ibc_uv_t = 1
	1631	ELSE
[215]	1632	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1633	TRIM( bc_uv_t ) // '"'
[226]	1634	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1635	ENDIF
	1636	ENDIF
	1637
	1638	!
	1639	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1640	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1641	IF ( momentum_advec == 'ups-scheme' ) THEN
	1642	rayleigh_damping_factor = 0.01
	1643	ELSE
	1644	rayleigh_damping_factor = 0.0
	1645	ENDIF
	1646	ELSE
	1647	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1648	THEN
[215]	1649	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1650	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1651	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1652	ENDIF
	1653	ENDIF
	1654
	1655	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1656	IF ( .NOT. ocean ) THEN
	1657	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1658	ELSE
	1659	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1660	ENDIF
[1]	1661	ELSE
[108]	1662	IF ( .NOT. ocean ) THEN
	1663	IF ( rayleigh_damping_height < 0.0 .OR. &
	1664	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1665	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1666	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1667	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1668	ENDIF
[108]	1669	ELSE
	1670	IF ( rayleigh_damping_height > 0.0 .OR. &
	1671	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1672	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1673	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1674	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1675	ENDIF
[1]	1676	ENDIF
	1677	ENDIF
	1678
	1679	!
	1680	!-- Check limiters for Upstream-Spline scheme
	1681	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1682	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1683	overshoot_limit_e < 0.0 ) THEN
[215]	1684	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1685	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1686	ENDIF
	1687	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1688	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1689	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1690	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1691	ENDIF
	1692
	1693	!
	1694	!-- Check number of chosen statistic regions. More than 10 regions are not
	1695	!-- allowed, because so far no more than 10 corresponding output files can
	1696	!-- be opened (cf. check_open)
	1697	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1698	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1699	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1700	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1701	ENDIF
	1702	IF ( normalizing_region > statistic_regions .OR. &
	1703	normalizing_region < 0) THEN
[215]	1704	WRITE ( message_string, * ) 'normalizing_region = ', &
	1705	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1706	' (value of statistic_regions)'
[226]	1707	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1708	ENDIF
	1709
	1710	!
[116]	1711	!-- Check the interval for sorting particles.
	1712	!-- Using particles as cloud droplets requires sorting after each timestep.
	1713	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1714	dt_sort_particles = 0.0
[215]	1715	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1716	'_droplets = .TRUE.'
[226]	1717	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1718	ENDIF
	1719
	1720	!
[1]	1721	!-- Set the default intervals for data output, if necessary
	1722	!-- NOTE: dt_dosp has already been set in package_parin
	1723	IF ( dt_data_output /= 9999999.9 ) THEN
	1724	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1725	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1726	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1727	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1728	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1729	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1730	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1731	DO mid = 1, max_masks
[410]	1732	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1733	ENDDO
[1]	1734	ENDIF
	1735
	1736	!
	1737	!-- Set the default skip time intervals for data output, if necessary
	1738	IF ( skip_time_dopr == 9999999.9 ) &
	1739	skip_time_dopr = skip_time_data_output
	1740	IF ( skip_time_dosp == 9999999.9 ) &
	1741	skip_time_dosp = skip_time_data_output
	1742	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1743	skip_time_do2d_xy = skip_time_data_output
	1744	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1745	skip_time_do2d_xz = skip_time_data_output
	1746	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1747	skip_time_do2d_yz = skip_time_data_output
	1748	IF ( skip_time_do3d == 9999999.9 ) &
	1749	skip_time_do3d = skip_time_data_output
	1750	IF ( skip_time_data_output_av == 9999999.9 ) &
	1751	skip_time_data_output_av = skip_time_data_output
[564]	1752	DO mid = 1, max_masks
[410]	1753	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1754	skip_time_domask(mid) = skip_time_data_output
	1755	ENDDO
[1]	1756
	1757	!
	1758	!-- Check the average intervals (first for 3d-data, then for profiles and
	1759	!-- spectra)
	1760	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1761	WRITE( message_string, * ) 'averaging_interval = ', &
	1762	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1763	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1764	ENDIF
	1765
	1766	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1767	averaging_interval_pr = averaging_interval
	1768	ENDIF
	1769
	1770	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1771	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1772	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1773	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1774	ENDIF
	1775
	1776	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1777	averaging_interval_sp = averaging_interval
	1778	ENDIF
	1779
	1780	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1781	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1782	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1783	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1784	ENDIF
	1785
	1786	!
	1787	!-- Set the default interval for profiles entering the temporal average
	1788	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1789	dt_averaging_input_pr = dt_averaging_input
	1790	ENDIF
	1791
	1792	!
	1793	!-- Set the default interval for the output of timeseries to a reasonable
	1794	!-- value (tries to minimize the number of calls of flow_statistics)
	1795	IF ( dt_dots == 9999999.9 ) THEN
	1796	IF ( averaging_interval_pr == 0.0 ) THEN
	1797	dt_dots = MIN( dt_run_control, dt_dopr )
	1798	ELSE
	1799	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1800	ENDIF
	1801	ENDIF
	1802
	1803	!
	1804	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1805	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1806	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1807	dt_averaging_input, ' must be <= averaging_interval = ', &
	1808	averaging_interval
[226]	1809	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1810	ENDIF
	1811
	1812	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1813	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1814	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1815	averaging_interval_pr
[226]	1816	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1817	ENDIF
	1818
	1819	!
[72]	1820	!-- Set the default value for the integration interval of precipitation amount
	1821	IF ( precipitation ) THEN
	1822	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1823	precipitation_amount_interval = dt_do2d_xy
	1824	ELSE
	1825	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1826	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1827	precipitation_amount_interval, ' must not be larger than ', &
	1828	'dt_do2d_xy = ', dt_do2d_xy
[226]	1829	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1830	ENDIF
	1831	ENDIF
	1832	ENDIF
	1833
	1834	!
[1]	1835	!-- Determine the number of output profiles and check whether they are
	1836	!-- permissible
	1837	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1838
	1839	dopr_n = dopr_n + 1
	1840	i = dopr_n
	1841
	1842	!
	1843	!-- Determine internal profile number (for hom, homs)
	1844	!-- and store height levels
	1845	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1846
	1847	CASE ( 'u', '#u' )
	1848	dopr_index(i) = 1
[87]	1849	dopr_unit(i) = 'm/s'
[1]	1850	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1851	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1852	dopr_initial_index(i) = 5
	1853	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1854	data_output_pr(i) = data_output_pr(i)(2:)
	1855	ENDIF
	1856
	1857	CASE ( 'v', '#v' )
	1858	dopr_index(i) = 2
[87]	1859	dopr_unit(i) = 'm/s'
	1860	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1861	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1862	dopr_initial_index(i) = 6
	1863	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1864	data_output_pr(i) = data_output_pr(i)(2:)
	1865	ENDIF
	1866
	1867	CASE ( 'w' )
	1868	dopr_index(i) = 3
[87]	1869	dopr_unit(i) = 'm/s'
	1870	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1871
	1872	CASE ( 'pt', '#pt' )
	1873	IF ( .NOT. cloud_physics ) THEN
	1874	dopr_index(i) = 4
[87]	1875	dopr_unit(i) = 'K'
[1]	1876	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1877	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1878	dopr_initial_index(i) = 7
	1879	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1880	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1881	data_output_pr(i) = data_output_pr(i)(2:)
	1882	ENDIF
	1883	ELSE
	1884	dopr_index(i) = 43
[87]	1885	dopr_unit(i) = 'K'
[1]	1886	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1887	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1888	dopr_initial_index(i) = 28
	1889	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1890	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1891	data_output_pr(i) = data_output_pr(i)(2:)
	1892	ENDIF
	1893	ENDIF
	1894
	1895	CASE ( 'e' )
	1896	dopr_index(i) = 8
[87]	1897	dopr_unit(i) = 'm2/s2'
[1]	1898	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1899	hom(nzb,2,8,:) = 0.0
	1900
	1901	CASE ( 'km', '#km' )
	1902	dopr_index(i) = 9
[87]	1903	dopr_unit(i) = 'm2/s'
[1]	1904	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1905	hom(nzb,2,9,:) = 0.0
	1906	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1907	dopr_initial_index(i) = 23
	1908	hom(:,2,23,:) = hom(:,2,9,:)
	1909	data_output_pr(i) = data_output_pr(i)(2:)
	1910	ENDIF
	1911
	1912	CASE ( 'kh', '#kh' )
	1913	dopr_index(i) = 10
[87]	1914	dopr_unit(i) = 'm2/s'
[1]	1915	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1916	hom(nzb,2,10,:) = 0.0
	1917	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1918	dopr_initial_index(i) = 24
	1919	hom(:,2,24,:) = hom(:,2,10,:)
	1920	data_output_pr(i) = data_output_pr(i)(2:)
	1921	ENDIF
	1922
	1923	CASE ( 'l', '#l' )
	1924	dopr_index(i) = 11
[87]	1925	dopr_unit(i) = 'm'
[1]	1926	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1927	hom(nzb,2,11,:) = 0.0
	1928	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1929	dopr_initial_index(i) = 25
	1930	hom(:,2,25,:) = hom(:,2,11,:)
	1931	data_output_pr(i) = data_output_pr(i)(2:)
	1932	ENDIF
	1933
	1934	CASE ( 'w"u"' )
	1935	dopr_index(i) = 12
[87]	1936	dopr_unit(i) = 'm2/s2'
[1]	1937	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1938	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1939
	1940	CASE ( 'wu' )
	1941	dopr_index(i) = 13
[87]	1942	dopr_unit(i) = 'm2/s2'
[1]	1943	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1944
	1945	CASE ( 'w"v"' )
	1946	dopr_index(i) = 14
[87]	1947	dopr_unit(i) = 'm2/s2'
[1]	1948	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1949	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1950
	1951	CASE ( 'wv' )
	1952	dopr_index(i) = 15
[87]	1953	dopr_unit(i) = 'm2/s2'
[1]	1954	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1955
	1956	CASE ( 'w"pt"' )
	1957	dopr_index(i) = 16
[87]	1958	dopr_unit(i) = 'K m/s'
[1]	1959	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1960
	1961	CASE ( 'wpt' )
	1962	dopr_index(i) = 17
[87]	1963	dopr_unit(i) = 'K m/s'
[1]	1964	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1965
	1966	CASE ( 'wpt' )
	1967	dopr_index(i) = 18
[87]	1968	dopr_unit(i) = 'K m/s'
[1]	1969	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1970
	1971	CASE ( 'wu' )
	1972	dopr_index(i) = 19
[87]	1973	dopr_unit(i) = 'm2/s2'
[1]	1974	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1975	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1976
	1977	CASE ( 'wv' )
	1978	dopr_index(i) = 20
[87]	1979	dopr_unit(i) = 'm2/s2'
[1]	1980	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1981	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1982
	1983	CASE ( 'wptBC' )
	1984	dopr_index(i) = 21
[87]	1985	dopr_unit(i) = 'K m/s'
[1]	1986	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1987
	1988	CASE ( 'wptBC' )
	1989	dopr_index(i) = 22
[87]	1990	dopr_unit(i) = 'K m/s'
[1]	1991	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1992
[96]	1993	CASE ( 'sa', '#sa' )
	1994	IF ( .NOT. ocean ) THEN
[215]	1995	message_string = 'data_output_pr = ' // &
	1996	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1997	'lemented for ocean = .FALSE.'
[226]	1998	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1999	ELSE
	2000	dopr_index(i) = 23
	2001	dopr_unit(i) = 'psu'
	2002	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2003	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2004	dopr_initial_index(i) = 26
	2005	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2006	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2007	data_output_pr(i) = data_output_pr(i)(2:)
	2008	ENDIF
	2009	ENDIF
	2010
[1]	2011	CASE ( 'u*2' )
	2012	dopr_index(i) = 30
[87]	2013	dopr_unit(i) = 'm2/s2'
[1]	2014	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2015
	2016	CASE ( 'v*2' )
	2017	dopr_index(i) = 31
[87]	2018	dopr_unit(i) = 'm2/s2'
[1]	2019	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2020
	2021	CASE ( 'w*2' )
	2022	dopr_index(i) = 32
[87]	2023	dopr_unit(i) = 'm2/s2'
[1]	2024	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2025
	2026	CASE ( 'pt*2' )
	2027	dopr_index(i) = 33
[87]	2028	dopr_unit(i) = 'K2'
[1]	2029	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2030
	2031	CASE ( 'e*' )
	2032	dopr_index(i) = 34
[87]	2033	dopr_unit(i) = 'm2/s2'
[1]	2034	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2035
	2036	CASE ( 'w2pt' )
	2037	dopr_index(i) = 35
[87]	2038	dopr_unit(i) = 'K m2/s2'
[1]	2039	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2040
	2041	CASE ( 'wpt2' )
	2042	dopr_index(i) = 36
[87]	2043	dopr_unit(i) = 'K2 m/s'
[1]	2044	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2045
	2046	CASE ( 'we' )
	2047	dopr_index(i) = 37
[87]	2048	dopr_unit(i) = 'm3/s3'
[1]	2049	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2050
	2051	CASE ( 'w*3' )
	2052	dopr_index(i) = 38
[87]	2053	dopr_unit(i) = 'm3/s3'
[1]	2054	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2055
	2056	CASE ( 'Sw' )
	2057	dopr_index(i) = 39
[89]	2058	dopr_unit(i) = 'none'
[1]	2059	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2060
[232]	2061	CASE ( 'p' )
	2062	dopr_index(i) = 40
	2063	dopr_unit(i) = 'Pa'
	2064	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2065
[1]	2066	CASE ( 'q', '#q' )
[108]	2067	IF ( .NOT. humidity ) THEN
[215]	2068	message_string = 'data_output_pr = ' // &
	2069	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2070	'lemented for humidity = .FALSE.'
[226]	2071	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2072	ELSE
	2073	dopr_index(i) = 41
[87]	2074	dopr_unit(i) = 'kg/kg'
	2075	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2076	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2077	dopr_initial_index(i) = 26
	2078	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2079	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2080	data_output_pr(i) = data_output_pr(i)(2:)
	2081	ENDIF
	2082	ENDIF
	2083
	2084	CASE ( 's', '#s' )
	2085	IF ( .NOT. passive_scalar ) THEN
[215]	2086	message_string = 'data_output_pr = ' // &
	2087	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2088	'lemented for passive_scalar = .FALSE.'
[226]	2089	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2090	ELSE
	2091	dopr_index(i) = 41
[87]	2092	dopr_unit(i) = 'kg/m3'
	2093	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2094	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2095	dopr_initial_index(i) = 26
	2096	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2097	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2098	data_output_pr(i) = data_output_pr(i)(2:)
	2099	ENDIF
	2100	ENDIF
	2101
	2102	CASE ( 'qv', '#qv' )
	2103	IF ( .NOT. cloud_physics ) THEN
	2104	dopr_index(i) = 41
[87]	2105	dopr_unit(i) = 'kg/kg'
	2106	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2107	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2108	dopr_initial_index(i) = 26
	2109	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2110	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2111	data_output_pr(i) = data_output_pr(i)(2:)
	2112	ENDIF
	2113	ELSE
	2114	dopr_index(i) = 42
[87]	2115	dopr_unit(i) = 'kg/kg'
	2116	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2117	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2118	dopr_initial_index(i) = 27
	2119	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2120	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2121	data_output_pr(i) = data_output_pr(i)(2:)
	2122	ENDIF
	2123	ENDIF
	2124
	2125	CASE ( 'lpt', '#lpt' )
	2126	IF ( .NOT. cloud_physics ) THEN
[215]	2127	message_string = 'data_output_pr = ' // &
	2128	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2129	'lemented for cloud_physics = .FALSE.'
[226]	2130	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2131	ELSE
	2132	dopr_index(i) = 4
[87]	2133	dopr_unit(i) = 'K'
[1]	2134	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2135	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2136	dopr_initial_index(i) = 7
	2137	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2138	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2139	data_output_pr(i) = data_output_pr(i)(2:)
	2140	ENDIF
	2141	ENDIF
	2142
	2143	CASE ( 'vpt', '#vpt' )
	2144	dopr_index(i) = 44
[87]	2145	dopr_unit(i) = 'K'
	2146	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2147	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2148	dopr_initial_index(i) = 29
	2149	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2150	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2151	data_output_pr(i) = data_output_pr(i)(2:)
	2152	ENDIF
	2153
	2154	CASE ( 'w"vpt"' )
	2155	dopr_index(i) = 45
[87]	2156	dopr_unit(i) = 'K m/s'
[1]	2157	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2158
	2159	CASE ( 'wvpt' )
	2160	dopr_index(i) = 46
[87]	2161	dopr_unit(i) = 'K m/s'
[1]	2162	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2163
	2164	CASE ( 'wvpt' )
	2165	dopr_index(i) = 47
[87]	2166	dopr_unit(i) = 'K m/s'
[1]	2167	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2168
	2169	CASE ( 'w"q"' )
[108]	2170	IF ( .NOT. humidity ) THEN
[215]	2171	message_string = 'data_output_pr = ' // &
	2172	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2173	'lemented for humidity = .FALSE.'
[226]	2174	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2175	ELSE
	2176	dopr_index(i) = 48
[87]	2177	dopr_unit(i) = 'kg/kg m/s'
[1]	2178	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2179	ENDIF
	2180
	2181	CASE ( 'wq' )
[108]	2182	IF ( .NOT. humidity ) THEN
[215]	2183	message_string = 'data_output_pr = ' // &
	2184	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2185	'lemented for humidity = .FALSE.'
[226]	2186	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2187	ELSE
	2188	dopr_index(i) = 49
[87]	2189	dopr_unit(i) = 'kg/kg m/s'
[1]	2190	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2191	ENDIF
	2192
	2193	CASE ( 'wq' )
[108]	2194	IF ( .NOT. humidity ) THEN
[215]	2195	message_string = 'data_output_pr = ' // &
	2196	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2197	'lemented for humidity = .FALSE.'
[226]	2198	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2199	ELSE
	2200	dopr_index(i) = 50
[87]	2201	dopr_unit(i) = 'kg/kg m/s'
[1]	2202	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2203	ENDIF
	2204
	2205	CASE ( 'w"s"' )
	2206	IF ( .NOT. passive_scalar ) THEN
[215]	2207	message_string = 'data_output_pr = ' // &
	2208	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2209	'lemented for passive_scalar = .FALSE.'
[226]	2210	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2211	ELSE
	2212	dopr_index(i) = 48
[87]	2213	dopr_unit(i) = 'kg/m3 m/s'
[1]	2214	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2215	ENDIF
	2216
	2217	CASE ( 'ws' )
	2218	IF ( .NOT. passive_scalar ) THEN
[215]	2219	message_string = 'data_output_pr = ' // &
	2220	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2221	'lemented for passive_scalar = .FALSE.'
[226]	2222	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2223	ELSE
	2224	dopr_index(i) = 49
[87]	2225	dopr_unit(i) = 'kg/m3 m/s'
[1]	2226	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2227	ENDIF
	2228
	2229	CASE ( 'ws' )
	2230	IF ( .NOT. passive_scalar ) THEN
[215]	2231	message_string = 'data_output_pr = ' // &
	2232	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2233	'lemented for passive_scalar = .FALSE.'
[226]	2234	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2235	ELSE
	2236	dopr_index(i) = 50
[87]	2237	dopr_unit(i) = 'kg/m3 m/s'
[1]	2238	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2239	ENDIF
	2240
	2241	CASE ( 'w"qv"' )
[75]	2242	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2243	THEN
	2244	dopr_index(i) = 48
[87]	2245	dopr_unit(i) = 'kg/kg m/s'
[1]	2246	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2247	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2248	dopr_index(i) = 51
[87]	2249	dopr_unit(i) = 'kg/kg m/s'
[1]	2250	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2251	ELSE
[215]	2252	message_string = 'data_output_pr = ' // &
	2253	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2254	'lemented for cloud_physics = .FALSE. an&' // &
	2255	'd humidity = .FALSE.'
[226]	2256	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2257	ENDIF
	2258
	2259	CASE ( 'wqv' )
[75]	2260	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2261	THEN
	2262	dopr_index(i) = 49
[87]	2263	dopr_unit(i) = 'kg/kg m/s'
[1]	2264	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2265	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2266	dopr_index(i) = 52
[87]	2267	dopr_unit(i) = 'kg/kg m/s'
[1]	2268	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2269	ELSE
[215]	2270	message_string = 'data_output_pr = ' // &
	2271	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2272	'lemented for cloud_physics = .FALSE. an&' // &
	2273	'd humidity = .FALSE.'
[226]	2274	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2275	ENDIF
	2276
	2277	CASE ( 'wqv' )
[75]	2278	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2279	THEN
	2280	dopr_index(i) = 50
[87]	2281	dopr_unit(i) = 'kg/kg m/s'
[1]	2282	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2283	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2284	dopr_index(i) = 53
[87]	2285	dopr_unit(i) = 'kg/kg m/s'
[1]	2286	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2287	ELSE
[215]	2288	message_string = 'data_output_pr = ' // &
	2289	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2290	'lemented for cloud_physics = .FALSE. an&' // &
	2291	'd humidity = .FALSE.'
[226]	2292	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2293	ENDIF
	2294
	2295	CASE ( 'ql' )
	2296	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2297	message_string = 'data_output_pr = ' // &
	2298	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2299	'lemented for cloud_physics = .FALSE. or' // &
	2300	'&cloud_droplets = .FALSE.'
[226]	2301	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2302	ELSE
	2303	dopr_index(i) = 54
[87]	2304	dopr_unit(i) = 'kg/kg'
[1]	2305	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2306	ENDIF
	2307
[524]	2308	CASE ( 'wuu*:dz' )
[1]	2309	dopr_index(i) = 55
[87]	2310	dopr_unit(i) = 'm2/s3'
[1]	2311	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2312
[524]	2313	CASE ( 'wp:dz' )
[1]	2314	dopr_index(i) = 56
[87]	2315	dopr_unit(i) = 'm2/s3'
[106]	2316	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2317
[524]	2318	CASE ( 'w"e:dz' )
[1]	2319	dopr_index(i) = 57
[87]	2320	dopr_unit(i) = 'm2/s3'
[1]	2321	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2322
[667]	2323
[1]	2324	CASE ( 'u"pt"' )
	2325	dopr_index(i) = 58
[87]	2326	dopr_unit(i) = 'K m/s'
[1]	2327	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2328
	2329	CASE ( 'upt' )
	2330	dopr_index(i) = 59
[87]	2331	dopr_unit(i) = 'K m/s'
[1]	2332	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2333
	2334	CASE ( 'upt_t' )
	2335	dopr_index(i) = 60
[87]	2336	dopr_unit(i) = 'K m/s'
[1]	2337	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2338
	2339	CASE ( 'v"pt"' )
	2340	dopr_index(i) = 61
[87]	2341	dopr_unit(i) = 'K m/s'
[1]	2342	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2343
	2344	CASE ( 'vpt' )
	2345	dopr_index(i) = 62
[87]	2346	dopr_unit(i) = 'K m/s'
[1]	2347	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2348
	2349	CASE ( 'vpt_t' )
	2350	dopr_index(i) = 63
[87]	2351	dopr_unit(i) = 'K m/s'
[1]	2352	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2353
[96]	2354	CASE ( 'rho' )
[388]	2355	IF ( .NOT. ocean ) THEN
	2356	message_string = 'data_output_pr = ' // &
	2357	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2358	'lemented for ocean = .FALSE.'
	2359	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2360	ELSE
	2361	dopr_index(i) = 64
	2362	dopr_unit(i) = 'kg/m3'
	2363	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2364	ENDIF
[1]	2365
[96]	2366	CASE ( 'w"sa"' )
	2367	IF ( .NOT. ocean ) THEN
[215]	2368	message_string = 'data_output_pr = ' // &
	2369	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2370	'lemented for ocean = .FALSE.'
[226]	2371	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2372	ELSE
	2373	dopr_index(i) = 65
	2374	dopr_unit(i) = 'psu m/s'
	2375	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2376	ENDIF
	2377
	2378	CASE ( 'wsa' )
	2379	IF ( .NOT. ocean ) THEN
[215]	2380	message_string = 'data_output_pr = ' // &
	2381	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2382	'lemented for ocean = .FALSE.'
[226]	2383	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2384	ELSE
	2385	dopr_index(i) = 66
	2386	dopr_unit(i) = 'psu m/s'
	2387	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2388	ENDIF
	2389
	2390	CASE ( 'wsa' )
	2391	IF ( .NOT. ocean ) THEN
[215]	2392	message_string = 'data_output_pr = ' // &
	2393	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2394	'lemented for ocean = .FALSE.'
[226]	2395	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2396	ELSE
	2397	dopr_index(i) = 67
	2398	dopr_unit(i) = 'psu m/s'
	2399	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2400	ENDIF
	2401
[106]	2402	CASE ( 'wp' )
	2403	dopr_index(i) = 68
	2404	dopr_unit(i) = 'm3/s3'
	2405	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2406
[106]	2407	CASE ( 'w"e' )
	2408	dopr_index(i) = 69
	2409	dopr_unit(i) = 'm3/s3'
	2410	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2411
[197]	2412	CASE ( 'q*2' )
	2413	IF ( .NOT. humidity ) THEN
[215]	2414	message_string = 'data_output_pr = ' // &
	2415	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2416	'lemented for humidity = .FALSE.'
[226]	2417	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2418	ELSE
	2419	dopr_index(i) = 70
	2420	dopr_unit(i) = 'kg2/kg2'
	2421	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2422	ENDIF
[106]	2423
[388]	2424	CASE ( 'prho' )
	2425	IF ( .NOT. ocean ) THEN
	2426	message_string = 'data_output_pr = ' // &
	2427	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2428	'lemented for ocean = .FALSE.'
	2429	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2430	ELSE
	2431	dopr_index(i) = 71
	2432	dopr_unit(i) = 'kg/m3'
	2433	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2434	ENDIF
	2435
	2436	CASE ( 'hyp' )
	2437	dopr_index(i) = 72
[531]	2438	dopr_unit(i) = 'dbar'
[388]	2439	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2440
[1]	2441	CASE DEFAULT
[87]	2442
	2443	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2444
	2445	IF ( unit == 'illegal' ) THEN
[215]	2446	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2447	message_string = 'illegal value for data_output_pr or ' // &
	2448	'data_output_pr_user = "' // &
	2449	TRIM( data_output_pr(i) ) // '"'
[226]	2450	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2451	ELSE
	2452	message_string = 'illegal value for data_output_pr = "' // &
	2453	TRIM( data_output_pr(i) ) // '"'
[226]	2454	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2455	ENDIF
[1]	2456	ENDIF
	2457
	2458	END SELECT
[667]	2459
[1]	2460	!
	2461	!-- Check to which of the predefined coordinate systems the profile belongs
	2462	DO k = 1, crmax
	2463	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2464	/=0 ) &
	2465	THEN
	2466	dopr_crossindex(i) = k
	2467	EXIT
	2468	ENDIF
	2469	ENDDO
	2470	!
	2471	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2472	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2473	!-- control characters
	2474	dopr_label(i) = data_output_pr(i)
	2475	position = INDEX( dopr_label(i) , '"' )
	2476	DO WHILE ( position /= 0 )
	2477	dopr_label(i)(position:position) = ''''
	2478	position = INDEX( dopr_label(i) , '"' )
	2479	ENDDO
	2480
	2481	ENDDO
	2482
	2483	!
	2484	!-- y-value range of the coordinate system (PROFIL).
	2485	!-- x-value range determined in plot_1d.
[94]	2486	IF ( .NOT. ocean ) THEN
	2487	cross_uymin = 0.0
	2488	IF ( z_max_do1d == -1.0 ) THEN
	2489	cross_uymax = zu(nzt+1)
	2490	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2491	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2492	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2493	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2494	ELSE
	2495	cross_uymax = z_max_do1d
	2496	ENDIF
[1]	2497	ENDIF
	2498
	2499	!
	2500	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2501	!-- permissible
	2502	DO i = 1, crmax
	2503	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2504
	2505	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2506	j = 0
	2507
	2508	CASE DEFAULT
[215]	2509	message_string = 'unknown normalization method cross_normali' // &
	2510	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2511	'"'
[226]	2512	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2513
	2514	END SELECT
	2515	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2516
	2517	CASE ( '', 'z_i' )
	2518	j = 0
	2519
	2520	CASE DEFAULT
[215]	2521	message_string = 'unknown normalization method cross_normali' // &
	2522	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2523	'"'
[226]	2524	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2525
	2526	END SELECT
	2527	ENDDO
	2528	!
	2529	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2530	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2531	THEN
[215]	2532	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2533	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2534	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2535	ENDIF
	2536
	2537
	2538	!
	2539	!-- Append user-defined data output variables to the standard data output
	2540	IF ( data_output_user(1) /= ' ' ) THEN
	2541	i = 1
	2542	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2543	i = i + 1
	2544	ENDDO
	2545	j = 1
	2546	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2547	IF ( i > 100 ) THEN
[215]	2548	message_string = 'number of output quantitities given by data' // &
	2549	'_output and data_output_user exceeds the limit of 100'
[226]	2550	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2551	ENDIF
	2552	data_output(i) = data_output_user(j)
	2553	i = i + 1
	2554	j = j + 1
	2555	ENDDO
	2556	ENDIF
	2557
	2558	!
	2559	!-- Check and set steering parameters for 2d/3d data output and averaging
	2560	i = 1
	2561	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2562	!
	2563	!-- Check for data averaging
	2564	ilen = LEN_TRIM( data_output(i) )
	2565	j = 0 ! no data averaging
	2566	IF ( ilen > 3 ) THEN
	2567	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2568	j = 1 ! data averaging
	2569	data_output(i) = data_output(i)(1:ilen-3)
	2570	ENDIF
	2571	ENDIF
	2572	!
	2573	!-- Check for cross section or volume data
	2574	ilen = LEN_TRIM( data_output(i) )
	2575	k = 0 ! 3d data
	2576	var = data_output(i)(1:ilen)
	2577	IF ( ilen > 3 ) THEN
	2578	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2579	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2580	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2581	k = 1 ! 2d data
	2582	var = data_output(i)(1:ilen-3)
	2583	ENDIF
	2584	ENDIF
	2585	!
	2586	!-- Check for allowed value and set units
	2587	SELECT CASE ( TRIM( var ) )
	2588
	2589	CASE ( 'e' )
	2590	IF ( constant_diffusion ) THEN
[215]	2591	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2592	'res constant_diffusion = .FALSE.'
[226]	2593	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2594	ENDIF
	2595	unit = 'm2/s2'
	2596
[771]	2597	CASE ( 'lpt' )
	2598	IF ( .NOT. cloud_physics ) THEN
	2599	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2600	'res cloud_physics = .TRUE.'
	2601	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2602	ENDIF
	2603	unit = 'K'
	2604
[1]	2605	CASE ( 'pc', 'pr' )
	2606	IF ( .NOT. particle_advection ) THEN
[215]	2607	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2608	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2609	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2610	ENDIF
	2611	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2612	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2613
	2614	CASE ( 'q', 'vpt' )
[75]	2615	IF ( .NOT. humidity ) THEN
[215]	2616	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2617	'res humidity = .TRUE.'
[226]	2618	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2619	ENDIF
	2620	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2621	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2622
	2623	CASE ( 'ql' )
	2624	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2625	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2626	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2627	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2628	ENDIF
	2629	unit = 'kg/kg'
	2630
	2631	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2632	IF ( .NOT. cloud_droplets ) THEN
[215]	2633	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2634	'res cloud_droplets = .TRUE.'
[226]	2635	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2636	ENDIF
	2637	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2638	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2639	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2640
	2641	CASE ( 'qv' )
	2642	IF ( .NOT. cloud_physics ) THEN
[215]	2643	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2644	'res cloud_physics = .TRUE.'
[226]	2645	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2646	ENDIF
	2647	unit = 'kg/kg'
	2648
[96]	2649	CASE ( 'rho' )
	2650	IF ( .NOT. ocean ) THEN
[215]	2651	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2652	'res ocean = .TRUE.'
[226]	2653	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2654	ENDIF
	2655	unit = 'kg/m3'
	2656
[1]	2657	CASE ( 's' )
	2658	IF ( .NOT. passive_scalar ) THEN
[215]	2659	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2660	'res passive_scalar = .TRUE.'
[226]	2661	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2662	ENDIF
	2663	unit = 'conc'
	2664
[96]	2665	CASE ( 'sa' )
	2666	IF ( .NOT. ocean ) THEN
[215]	2667	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2668	'res ocean = .TRUE.'
[226]	2669	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2670	ENDIF
	2671	unit = 'psu'
	2672
[354]	2673	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2674	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2675	message_string = 'illegal value for data_output: "' // &
	2676	TRIM( var ) // '" & only 2d-horizontal ' // &
	2677	'cross sections are allowed for this value'
[226]	2678	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2679	ENDIF
	2680	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2681	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2682	'res cloud_physics = .TRUE.'
[226]	2683	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2684	ENDIF
[72]	2685	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2686	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2687	'res precipitation = .TRUE.'
[226]	2688	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2689	ENDIF
	2690	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2691	message_string = 'temporal averaging of precipitation ' // &
	2692	'amount "' // TRIM( var ) // '" is not possible'
[226]	2693	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2694	ENDIF
	2695	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2696	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2697	'res precipitation = .TRUE.'
[226]	2698	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2699	ENDIF
[354]	2700	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2701	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2702	'res humidity = .TRUE.'
	2703	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2704	ENDIF
[72]	2705
[354]	2706	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2707	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2708	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2709	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2710	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2711	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2712	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2713	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2714
[1]	2715
	2716	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2717	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2718	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2719	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2720	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2721	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2722	CONTINUE
	2723
	2724	CASE DEFAULT
	2725	CALL user_check_data_output( var, unit )
	2726
	2727	IF ( unit == 'illegal' ) THEN
[215]	2728	IF ( data_output_user(1) /= ' ' ) THEN
	2729	message_string = 'illegal value for data_output or ' // &
	2730	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2731	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2732	ELSE
	2733	message_string = 'illegal value for data_output =' // &
	2734	TRIM( data_output(i) ) // '"'
[226]	2735	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2736	ENDIF
	2737	ENDIF
	2738
	2739	END SELECT
	2740	!
	2741	!-- Set the internal steering parameters appropriately
	2742	IF ( k == 0 ) THEN
	2743	do3d_no(j) = do3d_no(j) + 1
	2744	do3d(j,do3d_no(j)) = data_output(i)
	2745	do3d_unit(j,do3d_no(j)) = unit
	2746	ELSE
	2747	do2d_no(j) = do2d_no(j) + 1
	2748	do2d(j,do2d_no(j)) = data_output(i)
	2749	do2d_unit(j,do2d_no(j)) = unit
	2750	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2751	data_output_xy(j) = .TRUE.
	2752	ENDIF
	2753	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2754	data_output_xz(j) = .TRUE.
	2755	ENDIF
	2756	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2757	data_output_yz(j) = .TRUE.
	2758	ENDIF
	2759	ENDIF
	2760
	2761	IF ( j == 1 ) THEN
	2762	!
	2763	!-- Check, if variable is already subject to averaging
	2764	found = .FALSE.
	2765	DO k = 1, doav_n
	2766	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2767	ENDDO
	2768
	2769	IF ( .NOT. found ) THEN
	2770	doav_n = doav_n + 1
	2771	doav(doav_n) = var
	2772	ENDIF
	2773	ENDIF
	2774
	2775	i = i + 1
	2776	ENDDO
	2777
	2778	!
[376]	2779	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2780	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2781	WRITE( message_string, * ) 'output of averaged quantity "', &
	2782	TRIM( doav(1) ), '_av" requires to set a ', &
	2783	'non-zero & averaging interval'
	2784	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2785	ENDIF
	2786
	2787	!
[308]	2788	!-- Check sectional planes and store them in one shared array
	2789	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2790	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2791	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2792	ENDIF
	2793	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2794	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2795	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2796	ENDIF
	2797	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2798	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2799	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2800	ENDIF
[1]	2801	section(:,1) = section_xy
	2802	section(:,2) = section_xz
	2803	section(:,3) = section_yz
	2804
	2805	!
	2806	!-- Upper plot limit (grid point value) for 1D profiles
	2807	IF ( z_max_do1d == -1.0 ) THEN
[667]	2808
[1]	2809	nz_do1d = nzt+1
[667]	2810
[1]	2811	ELSE
	2812	DO k = nzb+1, nzt+1
	2813	nz_do1d = k
	2814	IF ( zw(k) > z_max_do1d ) EXIT
	2815	ENDDO
	2816	ENDIF
	2817
	2818	!
	2819	!-- Upper plot limit for 2D vertical sections
	2820	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2821	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2822	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2823	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2824	' (zu(nzt))'
[226]	2825	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2826	ENDIF
	2827
	2828	!
	2829	!-- Upper plot limit for 3D arrays
	2830	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2831
	2832	!
	2833	!-- Determine and check accuracy for compressed 3D plot output
	2834	IF ( do3d_compress ) THEN
	2835	!
	2836	!-- Compression only permissible on T3E machines
	2837	IF ( host(1:3) /= 't3e' ) THEN
[215]	2838	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2839	TRIM( host ) // '"'
[226]	2840	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2841	ENDIF
	2842
	2843	i = 1
	2844	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2845
	2846	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2847	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2848	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2849	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2850	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2851	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2852	ENDIF
	2853
	2854	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2855	var = do3d_comp_prec(i)(1:ilen-1)
	2856
	2857	SELECT CASE ( var )
	2858
	2859	CASE ( 'u' )
	2860	j = 1
	2861	CASE ( 'v' )
	2862	j = 2
	2863	CASE ( 'w' )
	2864	j = 3
	2865	CASE ( 'p' )
	2866	j = 4
	2867	CASE ( 'pt' )
	2868	j = 5
	2869
	2870	CASE DEFAULT
[215]	2871	WRITE( message_string, * ) 'unknown variable "', &
	2872	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2873	i, ')'
[226]	2874	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2875
	2876	END SELECT
	2877
	2878	plot_3d_precision(j)%precision = prec
	2879	i = i + 1
	2880
	2881	ENDDO
	2882	ENDIF
	2883
	2884	!
	2885	!-- Check the data output format(s)
	2886	IF ( data_output_format(1) == ' ' ) THEN
	2887	!
	2888	!-- Default value
	2889	netcdf_output = .TRUE.
	2890	ELSE
	2891	i = 1
	2892	DO WHILE ( data_output_format(i) /= ' ' )
	2893
	2894	SELECT CASE ( data_output_format(i) )
	2895
	2896	CASE ( 'netcdf' )
	2897	netcdf_output = .TRUE.
	2898	CASE ( 'iso2d' )
	2899	iso2d_output = .TRUE.
	2900	CASE ( 'profil' )
	2901	profil_output = .TRUE.
	2902	CASE ( 'avs' )
	2903	avs_output = .TRUE.
	2904
	2905	CASE DEFAULT
[215]	2906	message_string = 'unknown value for data_output_format "' // &
	2907	TRIM( data_output_format(i) ) // '"'
[226]	2908	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2909
	2910	END SELECT
	2911
	2912	i = i + 1
	2913	IF ( i > 10 ) EXIT
	2914
	2915	ENDDO
	2916
	2917	ENDIF
	2918
	2919	!
[410]	2920	!-- Check mask conditions
[553]	2921	DO mid = 1, max_masks
[567]	2922	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	2923	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	2924	masks = masks + 1
	2925	ENDIF
	2926	ENDDO
	2927
[410]	2928	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2929	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2930	'<= ', max_masks, ' (=max_masks)'
[564]	2931	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	2932	ENDIF
	2933	IF ( masks > 0 ) THEN
	2934	mask_scale(1) = mask_scale_x
	2935	mask_scale(2) = mask_scale_y
	2936	mask_scale(3) = mask_scale_z
	2937	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2938	WRITE( message_string, * ) &
	2939	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2940	'must be > 0.0'
[564]	2941	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	2942	ENDIF
	2943	!
	2944	!-- Generate masks for masked data output
	2945	CALL init_masks
	2946	ENDIF
	2947
	2948	!
[493]	2949	!-- Check the NetCDF data format
	2950	IF ( netcdf_data_format > 2 ) THEN
	2951	#if defined( __netcdf4 )
	2952	CONTINUE
	2953	#else
	2954	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
	2955	'cpp-directive __netcdf4 given & switch ' // &
	2956	'back to 64-bit offset format'
	2957	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	2958	netcdf_data_format = 2
	2959	#endif
	2960	ENDIF
	2961
	2962	!
[667]	2963
[809]	2964	#if ! defined( __check )
[1]	2965	!-- Check netcdf precison
	2966	ldum = .FALSE.
	2967	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	2968	#endif
[1]	2969	!
	2970	!-- Check, whether a constant diffusion coefficient shall be used
	2971	IF ( km_constant /= -1.0 ) THEN
	2972	IF ( km_constant < 0.0 ) THEN
[215]	2973	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2974	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2975	ELSE
	2976	IF ( prandtl_number < 0.0 ) THEN
[215]	2977	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2978	' < 0.0'
[226]	2979	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2980	ENDIF
	2981	constant_diffusion = .TRUE.
	2982
	2983	IF ( prandtl_layer ) THEN
[215]	2984	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2985	'value of km'
[226]	2986	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2987	ENDIF
	2988	ENDIF
	2989	ENDIF
	2990
	2991	!
	2992	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2993	!-- for the horizontal diffusivity used within the outflow damping layer,
	2994	!-- and check/set the width of the damping layer
	2995	IF ( bc_lr /= 'cyclic' ) THEN
	2996	IF ( km_damp_max == -1.0 ) THEN
	2997	km_damp_max = 0.5 * dx
	2998	ENDIF
	2999	IF ( outflow_damping_width == -1.0 ) THEN
	3000	outflow_damping_width = MIN( 20, nx/2 )
	3001	ENDIF
	3002	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	3003	message_string = 'outflow_damping width out of range'
[226]	3004	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3005	ENDIF
	3006	ENDIF
	3007
	3008	IF ( bc_ns /= 'cyclic' ) THEN
	3009	IF ( km_damp_max == -1.0 ) THEN
	3010	km_damp_max = 0.5 * dy
	3011	ENDIF
	3012	IF ( outflow_damping_width == -1.0 ) THEN
	3013	outflow_damping_width = MIN( 20, ny/2 )
	3014	ENDIF
	3015	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	3016	message_string = 'outflow_damping width out of range'
[226]	3017	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3018	ENDIF
	3019	ENDIF
	3020
	3021	!
	3022	!-- Check value range for rif
	3023	IF ( rif_min >= rif_max ) THEN
[215]	3024	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3025	'than rif_max = ', rif_max
[226]	3026	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3027	ENDIF
	3028
	3029	!
	3030	!-- Determine upper and lower hight level indices for random perturbations
[97]	3031	IF ( disturbance_level_b == -9999999.9 ) THEN
	3032	IF ( ocean ) THEN
	3033	disturbance_level_b = zu((nzt*2)/3)
	3034	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3035	ELSE
	3036	disturbance_level_b = zu(nzb+3)
	3037	disturbance_level_ind_b = nzb + 3
	3038	ENDIF
[1]	3039	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3040	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3041	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3042	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3043	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3044	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3045	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3046	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3047	ELSE
	3048	DO k = 3, nzt-2
	3049	IF ( disturbance_level_b <= zu(k) ) THEN
	3050	disturbance_level_ind_b = k
	3051	EXIT
	3052	ENDIF
	3053	ENDDO
	3054	ENDIF
	3055
[97]	3056	IF ( disturbance_level_t == -9999999.9 ) THEN
	3057	IF ( ocean ) THEN
	3058	disturbance_level_t = zu(nzt-3)
	3059	disturbance_level_ind_t = nzt - 3
	3060	ELSE
	3061	disturbance_level_t = zu(nzt/3)
	3062	disturbance_level_ind_t = nzt / 3
	3063	ENDIF
[1]	3064	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3065	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3066	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3067	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3068	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3069	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3070	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3071	disturbance_level_b
[226]	3072	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3073	ELSE
	3074	DO k = 3, nzt-2
	3075	IF ( disturbance_level_t <= zu(k) ) THEN
	3076	disturbance_level_ind_t = k
	3077	EXIT
	3078	ENDIF
	3079	ENDDO
	3080	ENDIF
	3081
	3082	!
	3083	!-- Check again whether the levels determined this way are ok.
	3084	!-- Error may occur at automatic determination and too few grid points in
	3085	!-- z-direction.
	3086	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3087	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3088	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3089	disturbance_level_b
[226]	3090	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3091	ENDIF
	3092
	3093	!
	3094	!-- Determine the horizontal index range for random perturbations.
	3095	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3096	!-- near the inflow and the perturbation area is further limited to ...(1)
	3097	!-- after the initial phase of the flow.
	3098	dist_nxl = 0; dist_nxr = nx
	3099	dist_nys = 0; dist_nyn = ny
	3100	IF ( bc_lr /= 'cyclic' ) THEN
	3101	IF ( inflow_disturbance_begin == -1 ) THEN
	3102	inflow_disturbance_begin = MIN( 10, nx/2 )
	3103	ENDIF
	3104	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3105	THEN
[215]	3106	message_string = 'inflow_disturbance_begin out of range'
[226]	3107	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3108	ENDIF
	3109	IF ( inflow_disturbance_end == -1 ) THEN
	3110	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3111	ENDIF
	3112	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3113	THEN
[215]	3114	message_string = 'inflow_disturbance_end out of range'
[226]	3115	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3116	ENDIF
	3117	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3118	IF ( inflow_disturbance_begin == -1 ) THEN
	3119	inflow_disturbance_begin = MIN( 10, ny/2 )
	3120	ENDIF
	3121	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3122	THEN
[215]	3123	message_string = 'inflow_disturbance_begin out of range'
[226]	3124	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3125	ENDIF
	3126	IF ( inflow_disturbance_end == -1 ) THEN
	3127	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3128	ENDIF
	3129	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3130	THEN
[215]	3131	message_string = 'inflow_disturbance_end out of range'
[226]	3132	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3133	ENDIF
	3134	ENDIF
	3135
[73]	3136	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3137	dist_nxr = nx - inflow_disturbance_begin
	3138	dist_nxl(1) = nx - inflow_disturbance_end
[73]	3139	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3140	dist_nxl = inflow_disturbance_begin
	3141	dist_nxr(1) = inflow_disturbance_end
[73]	3142	ENDIF
	3143	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3144	dist_nyn = ny - inflow_disturbance_begin
	3145	dist_nys(1) = ny - inflow_disturbance_end
[73]	3146	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3147	dist_nys = inflow_disturbance_begin
	3148	dist_nyn(1) = inflow_disturbance_end
	3149	ENDIF
	3150
	3151	!
[151]	3152	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3153	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	3154	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3155	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3156	'condition at the inflow boundary'
[226]	3157	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3158	ENDIF
	3159
	3160	!
	3161	!-- In case of turbulent inflow calculate the index of the recycling plane
	3162	IF ( turbulent_inflow ) THEN
	3163	IF ( recycling_width == 9999999.9 ) THEN
	3164	!
	3165	!-- Set the default value for the width of the recycling domain
	3166	recycling_width = 0.1 * nx * dx
	3167	ELSE
	3168	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3169	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3170	' ', recycling_width
[226]	3171	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3172	ENDIF
	3173	ENDIF
	3174	!
	3175	!-- Calculate the index
	3176	recycling_plane = recycling_width / dx
	3177	ENDIF
	3178
	3179	!
[1]	3180	!-- Check random generator
	3181	IF ( random_generator /= 'system-specific' .AND. &
	3182	random_generator /= 'numerical-recipes' ) THEN
[215]	3183	message_string = 'unknown random generator: random_generator = "' // &
	3184	TRIM( random_generator ) // '"'
[226]	3185	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3186	ENDIF
	3187
	3188	!
	3189	!-- Determine damping level index for 1D model
	3190	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3191	IF ( damp_level_1d == -1.0 ) THEN
	3192	damp_level_1d = zu(nzt+1)
	3193	damp_level_ind_1d = nzt + 1
	3194	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3195	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3196	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3197	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3198	ELSE
	3199	DO k = 1, nzt+1
	3200	IF ( damp_level_1d <= zu(k) ) THEN
	3201	damp_level_ind_1d = k
	3202	EXIT
	3203	ENDIF
	3204	ENDDO
	3205	ENDIF
	3206	ENDIF
[215]	3207
[1]	3208	!
	3209	!-- Check some other 1d-model parameters
	3210	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3211	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3212	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3213	'" is unknown'
[226]	3214	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3215	ENDIF
	3216	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3217	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3218	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3219	'" is unknown'
[226]	3220	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3221	ENDIF
	3222
	3223	!
	3224	!-- Set time for the next user defined restart (time_restart is the
	3225	!-- internal parameter for steering restart events)
	3226	IF ( restart_time /= 9999999.9 ) THEN
[291]	3227	IF ( restart_time > time_since_reference_point ) THEN
	3228	time_restart = restart_time
	3229	ENDIF
[1]	3230	ELSE
	3231	!
	3232	!-- In case of a restart run, set internal parameter to default (no restart)
	3233	!-- if the NAMELIST-parameter restart_time is omitted
	3234	time_restart = 9999999.9
	3235	ENDIF
	3236
	3237	!
	3238	!-- Set default value of the time needed to terminate a model run
	3239	IF ( termination_time_needed == -1.0 ) THEN
	3240	IF ( host(1:3) == 'ibm' ) THEN
	3241	termination_time_needed = 300.0
	3242	ELSE
	3243	termination_time_needed = 35.0
	3244	ENDIF
	3245	ENDIF
	3246
	3247	!
	3248	!-- Check the time needed to terminate a model run
	3249	IF ( host(1:3) == 't3e' ) THEN
	3250	!
	3251	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3252	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3253	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3254	WRITE( message_string, * ) 'termination_time_needed = ', &
	3255	termination_time_needed, ' must be > 30.0 on host "', &
	3256	TRIM( host ), '"'
[226]	3257	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3258	ENDIF
	3259	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3260	!
	3261	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3262	!-- because the job time consumed before executing palm (for compiling,
	3263	!-- copying of files, etc.) has to be regarded
	3264	IF ( termination_time_needed < 300.0 ) THEN
[215]	3265	WRITE( message_string, * ) 'termination_time_needed = ', &
	3266	termination_time_needed, ' should be >= 300.0 on host "', &
	3267	TRIM( host ), '"'
[226]	3268	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3269	ENDIF
	3270	ENDIF
	3271
[217]	3272	!
[240]	3273	!-- Check pressure gradient conditions
	3274	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3275	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3276	'w are .TRUE. but one of them must be .FALSE.'
[240]	3277	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3278	ENDIF
	3279	IF ( dp_external ) THEN
	3280	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3281	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3282	' of range'
	3283	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3284	ENDIF
	3285	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3286	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3287	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3288	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3289	ENDIF
	3290	ENDIF
	3291	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3292	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3293	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3294	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3295	ENDIF
[241]	3296	IF ( conserve_volume_flow ) THEN
	3297	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3298
	3299	conserve_volume_flow_mode = 'initial_profiles'
	3300
[241]	3301	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3302	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3303	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3304	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3305	conserve_volume_flow_mode
	3306	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3307	ENDIF
[667]	3308	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3309	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3310	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3311	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3312	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3313	ENDIF
	3314	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3315	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3316	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3317	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3318	' or ''bulk_velocity'''
	3319	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3320	ENDIF
	3321	ENDIF
	3322	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3323	( .NOT. conserve_volume_flow .OR. &
	3324	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3325	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3326	'conserve_volume_flow = .T. and ', &
[241]	3327	'conserve_volume_flow_mode = ''bulk_velocity'''
	3328	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3329	ENDIF
[240]	3330
	3331	!
[264]	3332	!-- Check particle attributes
	3333	IF ( particle_color /= 'none' ) THEN
	3334	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3335	particle_color /= 'z' ) THEN
	3336	message_string = 'illegal value for parameter particle_color: ' // &
	3337	TRIM( particle_color)
	3338	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3339	ELSE
	3340	IF ( color_interval(2) <= color_interval(1) ) THEN
	3341	message_string = 'color_interval(2) <= color_interval(1)'
	3342	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3343	ENDIF
	3344	ENDIF
	3345	ENDIF
	3346
	3347	IF ( particle_dvrpsize /= 'none' ) THEN
	3348	IF ( particle_dvrpsize /= 'absw' ) THEN
	3349	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3350	' ' // TRIM( particle_color)
	3351	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3352	ELSE
	3353	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3354	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3355	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3356	ENDIF
	3357	ENDIF
	3358	ENDIF
	3359
	3360	!
[217]	3361	!-- Check &userpar parameters
	3362	CALL user_check_parameters
[1]	3363
[217]	3364
[667]	3365
[1]	3366	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |