Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 766

Last change on this file since 766 was 708, checked in by raasch, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 127.8 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[708]	6	!
[667]	7	!
[668]	8	! Former revisions:
	9	! -----------------
[708]	10	! $Id: check_parameters.f90 708 2011-03-29 12:34:54Z raasch $
[687]	11	!
[708]	12	! 707 2011-03-29 11:39:40Z raasch
	13	! setting of bc_lr/ns_dirrad/raddir
	14	!
	15	! 689 2011-02-20 19:31:12z gryschka
[690]	16	! Bugfix for some logical expressions
	17	! (syntax was not compatible with all compilers)
[687]	18	!
[690]	19	! 680 2011-02-04 23:16:06Z gryschka
[681]	20	! init_vortex is not allowed with volume_flow_control
[668]	21	!
[674]	22	! 673 2011-01-18 16:19:48Z suehring
	23	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	24	!
[668]	25	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	26	! Exchange of parameters between ocean and atmosphere via PE0
	27	! Check for illegal combination of ws-scheme and timestep scheme.
	28	! Check for topography and ws-scheme.
	29	! Check for not cyclic boundary conditions in combination with ws-scheme and
	30	! loop_optimization = 'vector'.
	31	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	32	! Different processor/grid topology in atmosphere and ocean is now allowed!
	33	! Bugfixes in checking for conserve_volume_flow_mode
[601]	34	! 600 2010-11-24 16:10:51Z raasch
	35	! change due to new default value of surface_waterflux
[581]	36	! 580 2010-10-05 13:59:11Z heinze
[601]	37	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	38	!
[568]	39	! 567 2010-10-01 10:46:30Z helmke
	40	! calculating masks changed
	41	!
[565]	42	! 564 2010-09-30 13:18:59Z helmke
	43	! palm message identifiers of masked output changed, 20 replaced by max_masks
	44	!
[554]	45	! 553 2010-09-01 14:09:06Z weinreis
	46	! masks is calculated and removed from inipar
[532]	47	!
	48	! 531 2010-04-21 06:47:21Z heinze
	49	! Bugfix: unit of hyp changed to dbar
[392]	50	!
[525]	51	! 524 2010-03-30 02:04:51Z raasch
	52	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	53	!
[494]	54	! 493 2010-03-01 08:30:24Z raasch
	55	! netcdf_data_format is checked
	56	!
[449]	57	! 411 2009-12-11 14:15:58Z heinze
	58	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	59	! Initialization of large scale vertical motion (subsidence/ascent)
	60	!
	61	! 410 2009-12-04 17:05:40Z letzel
	62	! masked data output
	63	!
[392]	64	! 388 2009-09-23 09:40:33Z raasch
[388]	65	! Check profiles fpr prho and hyp.
[376]	66	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	67	! interval has been set, respective error message is included
[366]	68	! bc_lr_cyc and bc_ns_cyc are set,
[328]	69	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	70	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	71	! Coupling with independent precursor runs.
[264]	72	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	73	! Bugfix: pressure included for profile output
[240]	74	! Check pressure gradient conditions
[256]	75	! topography_grid_convention moved from user_check_parameters
	76	! 'single_street_canyon'
[367]	77	! Added shf* and qsws* to the list of available output data
[226]	78	!
	79	! 222 2009-01-12 16:04:16Z letzel
[217]	80	! +user_check_parameters
[213]	81	! Output of messages replaced by message handling routine.
[206]	82	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	83	! deleted __mpi2 directives
[222]	84	! Check that PALM is called with mrun -K parallel for coupling
[198]	85	!
	86	! 197 2008-09-16 15:29:03Z raasch
[177]	87	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	88	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	89	!
	90	! Strict grid matching along z is not needed for mg-solver.
[153]	91	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	92	! Case of reading data for recycling included in initializing_actions,
[197]	93	! check of turbulent_inflow and calculation of recycling_plane.
	94	! q*2 profile added
[139]	95	!
	96	! 138 2007-11-28 10:03:58Z letzel
[138]	97	! Plant canopy added
[132]	98	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	99	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	100	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	101	!
	102	! 109 2007-08-28 15:26:47Z letzel
[102]	103	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	104	! conditions for temperature and fluxes) in case of coupled runs.
	105	! +profiles for wp and w"e
[104]	106	! Bugfix: Error message concerning output of particle concentration (pc)
	107	! modified
[108]	108	! More checks and more default values for coupled runs
	109	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	110	! cloud_physics = .T.)
	111	! Rayleigh damping for ocean fixed.
[109]	112	! Check and, if necessary, set default value for dt_coupling
[98]	113	!
	114	! 97 2007-06-21 08:23:15Z raasch
[97]	115	! Initial salinity profile is calculated, salinity boundary conditions are
	116	! checked,
[94]	117	! z_max_do1d is checked only in case of ocean = .f.,
[97]	118	! +initial temperature and geostrophic velocity profiles for the ocean version,
	119	! use_pt_reference renamed use_reference
[77]	120	!
[90]	121	! 89 2007-05-25 12:08:31Z raasch
	122	! Check for user-defined profiles
	123	!
[77]	124	! 75 2007-03-22 09:54:05Z raasch
[51]	125	! "by_user" allowed as initializing action, -data_output_ts,
[63]	126	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	127	! and pt_reference are checked, moisture renamed humidity,
[72]	128	! output of precipitation amount/rate and roughnes length + check
[73]	129	! possible negative humidities are avoided in initial profile,
[75]	130	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	131	! revision added to run_description_header
[1]	132	!
[39]	133	! 20 2007-02-26 00:12:32Z raasch
	134	! Temperature and humidity gradients at top are now calculated for nzt+1,
	135	! top_heatflux and respective boundary condition bc_pt_t is checked
	136	!
[3]	137	! RCS Log replace by Id keyword, revision history cleaned up
	138	!
[1]	139	! Revision 1.61 2006/08/04 14:20:25 raasch
	140	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	141	! use_upstream_for_tke, default value for dt_dopts,
	142	! generation of file header moved from routines palm and header to here
	143	!
	144	! Revision 1.1 1997/08/26 06:29:23 raasch
	145	! Initial revision
	146	!
	147	!
	148	! Description:
	149	! ------------
	150	! Check control parameters and deduce further quantities.
	151	!------------------------------------------------------------------------------!
	152
	153	USE arrays_3d
	154	USE constants
	155	USE control_parameters
[264]	156	USE dvrp_variables
[1]	157	USE grid_variables
	158	USE indices
	159	USE model_1d
	160	USE netcdf_control
	161	USE particle_attributes
	162	USE pegrid
	163	USE profil_parameter
[411]	164	USE subsidence_mod
[1]	165	USE statistics
	166	USE transpose_indices
	167
	168	IMPLICIT NONE
	169
	170	CHARACTER (LEN=1) :: sq
	171	CHARACTER (LEN=6) :: var
	172	CHARACTER (LEN=7) :: unit
	173	CHARACTER (LEN=8) :: date
	174	CHARACTER (LEN=10) :: time
[102]	175	CHARACTER (LEN=40) :: coupling_string
[1]	176	CHARACTER (LEN=100) :: action
	177
[108]	178	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	179	position, prec
[1]	180	LOGICAL :: found, ldum
[291]	181	REAL :: gradient, maxn, maxp, remote = 0.0, &
	182	simulation_time_since_reference
[1]	183
	184	!
	185	!-- Warning, if host is not set
	186	IF ( host(1:1) == ' ' ) THEN
[213]	187	message_string = '"host" is not set. Please check that environment ' // &
	188	'variable "localhost" & is set before running PALM'
[226]	189	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	190	ENDIF
	191
	192	!
[102]	193	!-- Check the coupling mode
	194	IF ( coupling_mode /= 'uncoupled' .AND. &
	195	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	196	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	197	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	198	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	199	ENDIF
	200
	201	!
[108]	202	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	203	IF ( coupling_mode /= 'uncoupled') THEN
[213]	204
[108]	205	IF ( dt_coupling == 9999999.9 ) THEN
[213]	206	message_string = 'dt_coupling is not set but required for coup' // &
	207	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	208	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	209	ENDIF
[213]	210
[206]	211	#if defined( __parallel )
[667]	212	IF ( myid == 0 ) THEN
	213	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	214	ierr )
	215	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	216	status, ierr )
	217	ENDIF
	218	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	219
[108]	220	IF ( dt_coupling /= remote ) THEN
[213]	221	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	222	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	223	'dt_coupling_remote = ', remote
[226]	224	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	225	ENDIF
[109]	226	IF ( dt_coupling <= 0.0 ) THEN
[667]	227	IF ( myid == 0 ) THEN
	228	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	229	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	230	status, ierr )
	231	ENDIF
	232	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	233
[109]	234	dt_coupling = MAX( dt_max, remote )
[213]	235	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	236	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	237	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	238	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	239	ENDIF
[667]	240	IF ( myid == 0 ) THEN
	241	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	242	ierr )
	243	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	244	status, ierr )
	245	ENDIF
	246	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	247
[108]	248	IF ( restart_time /= remote ) THEN
[213]	249	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	250	'": restart_time = ', restart_time, '& is not equal to ', &
	251	'restart_time_remote = ', remote
[226]	252	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	253	ENDIF
[667]	254	IF ( myid == 0 ) THEN
	255	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	256	ierr )
	257	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	258	status, ierr )
	259	ENDIF
	260	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	261
[108]	262	IF ( dt_restart /= remote ) THEN
[213]	263	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	264	'": dt_restart = ', dt_restart, '& is not equal to ', &
	265	'dt_restart_remote = ', remote
[226]	266	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	267	ENDIF
[213]	268
[291]	269	simulation_time_since_reference = end_time - coupling_start_time
[667]	270	IF ( myid == 0 ) THEN
	271	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	272	14, comm_inter, ierr )
	273	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	274	status, ierr )
	275	ENDIF
	276	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
	277
[291]	278	IF ( simulation_time_since_reference /= remote ) THEN
[213]	279	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	280	'": simulation_time_since_reference = ', &
	281	simulation_time_since_reference, '& is not equal to ', &
	282	'simulation_time_since_reference_remote = ', remote
[226]	283	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	284	ENDIF
[213]	285
[667]	286
	287	IF ( myid == 0 ) THEN
	288	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	289	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	290	status, ierr )
[108]	291	ENDIF
[667]	292	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	293
[667]	294
	295	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	296
	297	IF ( dx < remote ) THEN
	298	WRITE( message_string, * ) 'coupling mode "', &
	299	TRIM( coupling_mode ), &
	300	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	301	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	302	ENDIF
	303
	304	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	305	WRITE( message_string, * ) 'coupling mode "', &
	306	TRIM( coupling_mode ), &
	307	'": Domain size in x-direction is not equal in ocean and atmosphere'
	308	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	309	ENDIF
	310
[108]	311	ENDIF
[213]	312
[667]	313	IF ( myid == 0) THEN
	314	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	315	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	316	status, ierr )
[108]	317	ENDIF
[667]	318	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	319
[667]	320	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	321
	322	IF ( dy < remote ) THEN
	323	WRITE( message_string, * ) 'coupling mode "', &
	324	TRIM( coupling_mode ), &
	325	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	326	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	327	ENDIF
	328
	329	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	330	WRITE( message_string, * ) 'coupling mode "', &
	331	TRIM( coupling_mode ), &
	332	'": Domain size in y-direction is not equal in ocean and atmosphere'
	333	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	334	ENDIF
	335
	336	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	337	WRITE( message_string, * ) 'coupling mode "', &
	338	TRIM( coupling_mode ), &
	339	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	340	' atmosphere'
	341	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	342	ENDIF
	343
	344	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	345	WRITE( message_string, * ) 'coupling mode "', &
	346	TRIM( coupling_mode ), &
	347	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	348	' atmosphere'
	349	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	350	ENDIF
	351
[108]	352	ENDIF
[222]	353	#else
	354	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	355	' ''mrun -K parallel'''
[226]	356	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	357	#endif
	358	ENDIF
	359
[206]	360	#if defined( __parallel )
[108]	361	!
	362	!-- Exchange via intercommunicator
[667]	363	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	364	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	365	ierr )
[667]	366	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	367	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	368	comm_inter, status, ierr )
[108]	369	ENDIF
[667]	370	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	371
[108]	372	#endif
	373
	374
	375	!
[1]	376	!-- Generate the file header which is used as a header for most of PALM's
	377	!-- output files
	378	CALL DATE_AND_TIME( date, time )
	379	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	380	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	381	IF ( coupling_mode == 'uncoupled' ) THEN
	382	coupling_string = ''
	383	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	384	coupling_string = ' coupled (atmosphere)'
	385	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	386	coupling_string = ' coupled (ocean)'
	387	ENDIF
[1]	388
[102]	389	WRITE ( run_description_header, &
	390	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	391	TRIM( version ), TRIM( revision ), 'run: ', &
	392	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	393	'host: ', TRIM( host ), run_date, run_time
[1]	394
	395	!
[63]	396	!-- Check the general loop optimization method
	397	IF ( loop_optimization == 'default' ) THEN
	398	IF ( host(1:3) == 'nec' ) THEN
	399	loop_optimization = 'vector'
	400	ELSE
	401	loop_optimization = 'cache'
	402	ENDIF
	403	ENDIF
	404	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	405	.AND. loop_optimization /= 'vector' ) THEN
[213]	406	message_string = 'illegal value given for loop_optimization: "' // &
	407	TRIM( loop_optimization ) // '"'
[226]	408	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	409	ENDIF
	410
	411	!
[1]	412	!-- Check topography setting (check for illegal parameter combinations)
	413	IF ( topography /= 'flat' ) THEN
	414	action = ' '
	415	IF ( scalar_advec /= 'pw-scheme' ) THEN
	416	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	417	ENDIF
	418	IF ( momentum_advec /= 'pw-scheme' ) THEN
	419	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	420	ENDIF
[51]	421	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	422	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	423	ENDIF
[114]	424	IF ( psolver == 'sor' ) THEN
[1]	425	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	426	ENDIF
	427	IF ( sloping_surface ) THEN
	428	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	429	ENDIF
	430	IF ( galilei_transformation ) THEN
	431	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	432	ENDIF
	433	IF ( cloud_physics ) THEN
	434	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	435	ENDIF
	436	IF ( cloud_droplets ) THEN
	437	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	438	ENDIF
	439	IF ( .NOT. prandtl_layer ) THEN
	440	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	441	ENDIF
	442	IF ( action /= ' ' ) THEN
[213]	443	message_string = 'a non-flat topography does not allow ' // &
	444	TRIM( action )
[226]	445	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	446	ENDIF
[667]	447	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	448	THEN
	449	message_string = 'topography is still not allowed with ' // &
	450	'momentum_advec = "' // TRIM( momentum_advec ) // &
	451	'"or scalar_advec = "' // TRIM( scalar_advec ) //'"'
	452	! message number still needs modification
	453	CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 )
	454	END IF
	455
[256]	456	!
	457	!-- In case of non-flat topography, check whether the convention how to
	458	!-- define the topography grid has been set correctly, or whether the default
	459	!-- is applicable. If this is not possible, abort.
	460	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	461	IF ( TRIM( topography ) /= 'single_building' .AND. &
	462	TRIM( topography ) /= 'single_street_canyon' .AND. &
	463	TRIM( topography ) /= 'read_from_file' ) THEN
	464	!-- The default value is not applicable here, because it is only valid
	465	!-- for the two standard cases 'single_building' and 'read_from_file'
	466	!-- defined in init_grid.
	467	WRITE( message_string, * ) &
	468	'The value for "topography_grid_convention" ', &
	469	'is not set. Its default value is & only valid for ', &
	470	'"topography" = ''single_building'', ', &
	471	'''single_street_canyon'' & or ''read_from_file''.', &
	472	' & Choose ''cell_edge'' or ''cell_center''.'
	473	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	474	ELSE
	475	!-- The default value is applicable here.
	476	!-- Set convention according to topography.
	477	IF ( TRIM( topography ) == 'single_building' .OR. &
	478	TRIM( topography ) == 'single_street_canyon' ) THEN
	479	topography_grid_convention = 'cell_edge'
	480	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	481	topography_grid_convention = 'cell_center'
	482	ENDIF
	483	ENDIF
	484	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	485	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	486	WRITE( message_string, * ) &
	487	'The value for "topography_grid_convention" is ', &
	488	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	489	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	490	ENDIF
	491
[1]	492	ENDIF
[94]	493
[1]	494	!
[94]	495	!-- Check ocean setting
	496	IF ( ocean ) THEN
[332]	497
[94]	498	action = ' '
	499	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	500	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	501	ENDIF
[97]	502	IF ( momentum_advec == 'ups-scheme' ) THEN
	503	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	504	ENDIF
[94]	505	IF ( action /= ' ' ) THEN
[213]	506	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	507	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	508	ENDIF
	509
[332]	510	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	511	TRIM( coupling_char ) == '_O' ) THEN
[343]	512
[94]	513	!
[332]	514	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	515	!-- ocean run (this setting is done via mrun-option -y)
[343]	516
[291]	517	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	518	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	519	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	520
[291]	521	ENDIF
	522
	523	!
[1]	524	!-- Check whether there are any illegal values
	525	!-- Pressure solver:
	526	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	527	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	528	message_string = 'unknown solver for perturbation pressure: psolver' // &
	529	' = "' // TRIM( psolver ) // '"'
[226]	530	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	531	ENDIF
	532
	533	#if defined( __parallel )
	534	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	535	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	536	'for a 1d domain-decomposition along x & please do' // &
	537	' not set npey/=1 in the parameter file'
[226]	538	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	539	ENDIF
[181]	540	IF ( psolver == 'poisfft_hybrid' .AND. &
	541	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	542	psolver == 'multigrid' .AND. &
	543	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	544	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	545	'work for subdomains with unequal size & please ' // &
	546	'set grid_matching = ''strict'' in the parameter file'
[226]	547	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	548	ENDIF
	549	#else
	550	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	551	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	552	' for a parallel environment'
[226]	553	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	554	ENDIF
	555	#endif
	556
	557	IF ( psolver == 'multigrid' ) THEN
	558	IF ( cycle_mg == 'w' ) THEN
	559	gamma_mg = 2
	560	ELSEIF ( cycle_mg == 'v' ) THEN
	561	gamma_mg = 1
	562	ELSE
[213]	563	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	564	TRIM( cycle_mg ) // '"'
[226]	565	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	566	ENDIF
	567	ENDIF
	568
	569	IF ( fft_method /= 'singleton-algorithm' .AND. &
	570	fft_method /= 'temperton-algorithm' .AND. &
	571	fft_method /= 'system-specific' ) THEN
[213]	572	message_string = 'unknown fft-algorithm: fft_method = "' // &
	573	TRIM( fft_method ) // '"'
[226]	574	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	575	ENDIF
[667]	576
	577	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	578	.NOT. call_psolver_at_all_substeps ) THEN
[667]	579	message_string = 'psolver must be called at each RK3 substep when "'//&
	580	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	581	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	582	END IF
[1]	583	!
	584	!-- Advection schemes:
[673]	585	!
	586	!-- Set the LOGICALS to enhance the performance.
	587	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	588	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	589
[667]	590	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' .AND. &
	591	momentum_advec /= 'ups-scheme' ) THEN
[214]	592	message_string = 'unknown advection scheme: momentum_advec = "' // &
	593	TRIM( momentum_advec ) // '"'
[226]	594	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	595	ENDIF
[667]	596	IF ((( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	597	.AND. timestep_scheme /= 'euler' ) .OR. (( momentum_advec == 'ws-scheme'&
	598	.OR. scalar_advec == 'ws-scheme') .AND. (timestep_scheme == 'euler' .OR. &
	599	timestep_scheme == 'leapfrog+euler' .OR. timestep_scheme == 'leapfrog' &
	600	.OR. timestep_scheme == 'runge-kutta-2'))) THEN
	601	message_string = 'momentum_advec or scalar_advec = "' &
	602	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	603	TRIM( timestep_scheme ) // '"'
[226]	604	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	605	ENDIF
[667]	606	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
	607	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'ups-scheme' ) THEN
[214]	608	message_string = 'unknown advection scheme: scalar_advec = "' // &
	609	TRIM( scalar_advec ) // '"'
[226]	610	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	611	ENDIF
	612
	613	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	614	use_upstream_for_tke = .TRUE.
[214]	615	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	616	'use_sgs_for_particles = .TRUE.'
[226]	617	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	618	ENDIF
	619
	620	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	621	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	622	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	623	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	624	ENDIF
	625
	626	!
	627	!-- Timestep schemes:
	628	SELECT CASE ( TRIM( timestep_scheme ) )
	629
	630	CASE ( 'euler' )
	631	intermediate_timestep_count_max = 1
	632	asselin_filter_factor = 0.0
	633
	634	CASE ( 'leapfrog', 'leapfrog+euler' )
	635	intermediate_timestep_count_max = 1
	636
	637	CASE ( 'runge-kutta-2' )
	638	intermediate_timestep_count_max = 2
	639	asselin_filter_factor = 0.0
	640
	641	CASE ( 'runge-kutta-3' )
	642	intermediate_timestep_count_max = 3
	643	asselin_filter_factor = 0.0
	644
	645	CASE DEFAULT
[214]	646	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	647	TRIM( timestep_scheme ) // '"'
[226]	648	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	649
	650	END SELECT
	651
[63]	652	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	653	THEN
[214]	654	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	655	'" & does not work with timestep_scheme "' // &
	656	TRIM( timestep_scheme ) // '"'
[226]	657	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	658	ENDIF
	659
[667]	660	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	661	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	662	message_string = 'momentum advection scheme "' // &
	663	TRIM( momentum_advec ) // '" & does not work with ' // &
	664	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	665	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	666	ENDIF
	667
[147]	668	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	669	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	670	!
[214]	671	!-- No restart run: several initialising actions are possible
[1]	672	action = initializing_actions
	673	DO WHILE ( TRIM( action ) /= '' )
	674	position = INDEX( action, ' ' )
	675	SELECT CASE ( action(1:position-1) )
	676
	677	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	678	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	679	action = action(position+1:)
	680
	681	CASE DEFAULT
[214]	682	message_string = 'initializing_action = "' // &
	683	TRIM( action ) // '" unkown or not allowed'
[226]	684	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	685
	686	END SELECT
	687	ENDDO
	688	ENDIF
[214]	689
[680]	690	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	691	conserve_volume_flow ) THEN
	692	message_string = 'initializing_actions = "initialize_vortex"' // &
	693	' ist not allowed with conserve_volume_flow = .T.'
	694	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	695	ENDIF
	696
	697
[1]	698	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	699	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	700	message_string = 'initializing_actions = "set_constant_profiles"' // &
	701	' and "set_1d-model_profiles" are not allowed ' // &
	702	'simultaneously'
[226]	703	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	704	ENDIF
[214]	705
[46]	706	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	707	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	708	message_string = 'initializing_actions = "set_constant_profiles"' // &
	709	' and "by_user" are not allowed simultaneously'
[226]	710	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	711	ENDIF
[214]	712
[46]	713	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	714	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	715	message_string = 'initializing_actions = "by_user" and ' // &
	716	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	717	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	718	ENDIF
[1]	719
[75]	720	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	721	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	722	'not allowed with humidity = ', humidity
[226]	723	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	724	ENDIF
	725
[72]	726	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	727	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	728	'not allowed with cloud_physics = ', cloud_physics
[226]	729	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	730	ENDIF
	731
[75]	732	IF ( humidity .AND. sloping_surface ) THEN
[214]	733	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	734	'are not allowed simultaneously'
[226]	735	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	736	ENDIF
	737
[75]	738	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	739	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	740	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	741	ENDIF
	742
[75]	743	IF ( passive_scalar .AND. humidity ) THEN
[214]	744	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	745	'is not allowed simultaneously'
[226]	746	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	747	ENDIF
	748
	749	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	750	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	751	' = .TRUE.'
[226]	752	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	753	ENDIF
	754
	755	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	756	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	757	'" found for parameter grid_matching'
[226]	758	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	759	ENDIF
	760
[138]	761	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	762	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	763	'coefficient & given value is drag_coefficient = 0.0'
[226]	764	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	765	ENDIF
	766
[1]	767	!
	768	!-- In case of no model continuation run, check initialising parameters and
	769	!-- deduce further quantities
	770	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	771
	772	!
	773	!-- Initial profiles for 1D and 3D model, respectively
	774	u_init = ug_surface
	775	v_init = vg_surface
	776	pt_init = pt_surface
[94]	777	IF ( humidity ) q_init = q_surface
	778	IF ( ocean ) sa_init = sa_surface
	779	IF ( passive_scalar ) q_init = s_surface
[138]	780	IF ( plant_canopy ) lad = 0.0
[1]	781
	782	!
	783	!--
	784	!-- If required, compute initial profile of the geostrophic wind
	785	!-- (component ug)
	786	i = 1
	787	gradient = 0.0
[97]	788
	789	IF ( .NOT. ocean ) THEN
	790
	791	ug_vertical_gradient_level_ind(1) = 0
	792	ug(0) = ug_surface
	793	DO k = 1, nzt+1
[177]	794	IF ( i < 11 ) THEN
	795	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	796	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	797	gradient = ug_vertical_gradient(i) / 100.0
	798	ug_vertical_gradient_level_ind(i) = k - 1
	799	i = i + 1
[1]	800	ENDIF
[177]	801	ENDIF
[97]	802	IF ( gradient /= 0.0 ) THEN
	803	IF ( k /= 1 ) THEN
	804	ug(k) = ug(k-1) + dzu(k) * gradient
	805	ELSE
	806	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	807	ENDIF
[1]	808	ELSE
[97]	809	ug(k) = ug(k-1)
[1]	810	ENDIF
[97]	811	ENDDO
[1]	812
[97]	813	ELSE
	814
	815	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	816	ug(nzt+1) = ug_surface
[667]	817	DO k = nzt, nzb, -1
[177]	818	IF ( i < 11 ) THEN
	819	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	820	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	821	gradient = ug_vertical_gradient(i) / 100.0
	822	ug_vertical_gradient_level_ind(i) = k + 1
	823	i = i + 1
[97]	824	ENDIF
	825	ENDIF
	826	IF ( gradient /= 0.0 ) THEN
	827	IF ( k /= nzt ) THEN
	828	ug(k) = ug(k+1) - dzu(k+1) * gradient
	829	ELSE
	830	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	831	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	832	ENDIF
	833	ELSE
	834	ug(k) = ug(k+1)
	835	ENDIF
	836	ENDDO
	837
	838	ENDIF
	839
[1]	840	u_init = ug
	841
	842	!
	843	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	844	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	845	ug_vertical_gradient_level(1) = 0.0
	846	ENDIF
	847
	848	!
	849	!--
	850	!-- If required, compute initial profile of the geostrophic wind
	851	!-- (component vg)
	852	i = 1
	853	gradient = 0.0
[97]	854
	855	IF ( .NOT. ocean ) THEN
	856
	857	vg_vertical_gradient_level_ind(1) = 0
	858	vg(0) = vg_surface
	859	DO k = 1, nzt+1
[177]	860	IF ( i < 11 ) THEN
	861	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	862	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	863	gradient = vg_vertical_gradient(i) / 100.0
	864	vg_vertical_gradient_level_ind(i) = k - 1
	865	i = i + 1
[1]	866	ENDIF
	867	ENDIF
[97]	868	IF ( gradient /= 0.0 ) THEN
	869	IF ( k /= 1 ) THEN
	870	vg(k) = vg(k-1) + dzu(k) * gradient
	871	ELSE
	872	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	873	ENDIF
[1]	874	ELSE
[97]	875	vg(k) = vg(k-1)
[1]	876	ENDIF
[97]	877	ENDDO
[1]	878
[97]	879	ELSE
	880
[121]	881	vg_vertical_gradient_level_ind(1) = nzt+1
	882	vg(nzt+1) = vg_surface
[667]	883	DO k = nzt, nzb, -1
[177]	884	IF ( i < 11 ) THEN
	885	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	886	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	887	gradient = vg_vertical_gradient(i) / 100.0
	888	vg_vertical_gradient_level_ind(i) = k + 1
	889	i = i + 1
[97]	890	ENDIF
	891	ENDIF
	892	IF ( gradient /= 0.0 ) THEN
	893	IF ( k /= nzt ) THEN
	894	vg(k) = vg(k+1) - dzu(k+1) * gradient
	895	ELSE
	896	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	897	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	898	ENDIF
	899	ELSE
	900	vg(k) = vg(k+1)
	901	ENDIF
	902	ENDDO
	903
	904	ENDIF
	905
[1]	906	v_init = vg
	907
	908	!
	909	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	910	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	911	vg_vertical_gradient_level(1) = 0.0
	912	ENDIF
	913
	914	!
[94]	915	!-- Compute initial temperature profile using the given temperature gradients
[1]	916	i = 1
	917	gradient = 0.0
[94]	918
	919	IF ( .NOT. ocean ) THEN
	920
	921	pt_vertical_gradient_level_ind(1) = 0
	922	DO k = 1, nzt+1
[177]	923	IF ( i < 11 ) THEN
	924	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	925	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	926	gradient = pt_vertical_gradient(i) / 100.0
	927	pt_vertical_gradient_level_ind(i) = k - 1
	928	i = i + 1
[1]	929	ENDIF
	930	ENDIF
[94]	931	IF ( gradient /= 0.0 ) THEN
	932	IF ( k /= 1 ) THEN
	933	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	934	ELSE
	935	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	936	ENDIF
[1]	937	ELSE
[94]	938	pt_init(k) = pt_init(k-1)
[1]	939	ENDIF
[94]	940	ENDDO
[1]	941
[94]	942	ELSE
	943
	944	pt_vertical_gradient_level_ind(1) = nzt+1
	945	DO k = nzt, 0, -1
[177]	946	IF ( i < 11 ) THEN
	947	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	948	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	949	gradient = pt_vertical_gradient(i) / 100.0
	950	pt_vertical_gradient_level_ind(i) = k + 1
	951	i = i + 1
[94]	952	ENDIF
	953	ENDIF
	954	IF ( gradient /= 0.0 ) THEN
	955	IF ( k /= nzt ) THEN
	956	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	957	ELSE
	958	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	959	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	960	ENDIF
	961	ELSE
	962	pt_init(k) = pt_init(k+1)
	963	ENDIF
	964	ENDDO
	965
	966	ENDIF
	967
[1]	968	!
	969	!-- In case of no given temperature gradients, choose gradient of neutral
	970	!-- stratification
[94]	971	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	972	pt_vertical_gradient_level(1) = 0.0
	973	ENDIF
	974
	975	!
[94]	976	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	977	!-- boundary condition
[19]	978	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	979
	980	!
	981	!-- If required, compute initial humidity or scalar profile using the given
	982	!-- humidity/scalar gradient. In case of scalar transport, initially store
	983	!-- values of the scalar parameters on humidity parameters
	984	IF ( passive_scalar ) THEN
	985	bc_q_b = bc_s_b
	986	bc_q_t = bc_s_t
	987	q_surface = s_surface
	988	q_surface_initial_change = s_surface_initial_change
	989	q_vertical_gradient = s_vertical_gradient
	990	q_vertical_gradient_level = s_vertical_gradient_level
	991	surface_waterflux = surface_scalarflux
[407]	992	wall_humidityflux = wall_scalarflux
[1]	993	ENDIF
	994
[75]	995	IF ( humidity .OR. passive_scalar ) THEN
[1]	996
	997	i = 1
	998	gradient = 0.0
	999	q_vertical_gradient_level_ind(1) = 0
	1000	DO k = 1, nzt+1
[177]	1001	IF ( i < 11 ) THEN
	1002	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1003	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1004	gradient = q_vertical_gradient(i) / 100.0
	1005	q_vertical_gradient_level_ind(i) = k - 1
	1006	i = i + 1
[1]	1007	ENDIF
	1008	ENDIF
	1009	IF ( gradient /= 0.0 ) THEN
	1010	IF ( k /= 1 ) THEN
	1011	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1012	ELSE
	1013	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1014	ENDIF
	1015	ELSE
	1016	q_init(k) = q_init(k-1)
	1017	ENDIF
[72]	1018	!
	1019	!-- Avoid negative humidities
	1020	IF ( q_init(k) < 0.0 ) THEN
	1021	q_init(k) = 0.0
	1022	ENDIF
[1]	1023	ENDDO
	1024
	1025	!
	1026	!-- In case of no given humidity gradients, choose zero gradient
	1027	!-- conditions
	1028	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1029	q_vertical_gradient_level(1) = 0.0
	1030	ENDIF
	1031
	1032	!
	1033	!-- Store humidity gradient at the top boundary for possile Neumann
	1034	!-- boundary condition
[19]	1035	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1036
	1037	ENDIF
	1038
[94]	1039	!
	1040	!-- If required, compute initial salinity profile using the given salinity
	1041	!-- gradients
	1042	IF ( ocean ) THEN
	1043
	1044	i = 1
	1045	gradient = 0.0
	1046
	1047	sa_vertical_gradient_level_ind(1) = nzt+1
	1048	DO k = nzt, 0, -1
[177]	1049	IF ( i < 11 ) THEN
	1050	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1051	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1052	gradient = sa_vertical_gradient(i) / 100.0
	1053	sa_vertical_gradient_level_ind(i) = k + 1
	1054	i = i + 1
[94]	1055	ENDIF
	1056	ENDIF
	1057	IF ( gradient /= 0.0 ) THEN
	1058	IF ( k /= nzt ) THEN
	1059	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1060	ELSE
	1061	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1062	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1063	ENDIF
	1064	ELSE
	1065	sa_init(k) = sa_init(k+1)
	1066	ENDIF
	1067	ENDDO
	1068
	1069	ENDIF
	1070
[138]	1071	!
[388]	1072	!-- If required compute the profile of leaf area density used in the plant
	1073	!-- canopy model
[138]	1074	IF ( plant_canopy ) THEN
	1075
	1076	i = 1
	1077	gradient = 0.0
[1]	1078
[138]	1079	IF ( .NOT. ocean ) THEN
[153]	1080
	1081	lad(0) = lad_surface
[138]	1082
	1083	lad_vertical_gradient_level_ind(1) = 0
	1084	DO k = 1, pch_index
[177]	1085	IF ( i < 11 ) THEN
	1086	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1087	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1088	gradient = lad_vertical_gradient(i)
	1089	lad_vertical_gradient_level_ind(i) = k - 1
	1090	i = i + 1
[138]	1091	ENDIF
	1092	ENDIF
	1093	IF ( gradient /= 0.0 ) THEN
	1094	IF ( k /= 1 ) THEN
	1095	lad(k) = lad(k-1) + dzu(k) * gradient
	1096	ELSE
	1097	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1098	ENDIF
	1099	ELSE
	1100	lad(k) = lad(k-1)
	1101	ENDIF
	1102	ENDDO
	1103
	1104	ENDIF
	1105
[1]	1106	!
[388]	1107	!-- In case of no given leaf area density gradients, choose a vanishing
	1108	!-- gradient
[138]	1109	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1110	lad_vertical_gradient_level(1) = 0.0
	1111	ENDIF
	1112
	1113	ENDIF
	1114
	1115	ENDIF
[411]	1116
	1117	!
	1118	!-- Initialize large scale subsidence if required
[580]	1119	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1120	large_scale_subsidence = .TRUE.
	1121	CALL init_w_subsidence
	1122	END IF
	1123
[138]	1124
[667]	1125
[138]	1126	!
[1]	1127	!-- Compute Coriolis parameter
	1128	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1129	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1130
	1131	!
[97]	1132	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1133	!-- set the reference temperature equal to the surface temperature.
	1134	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1135
	1136	!
[97]	1137	!-- Reference value has to be used in buoyancy terms
	1138	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1139
	1140	!
	1141	!-- Sign of buoyancy/stability terms
	1142	IF ( ocean ) atmos_ocean_sign = -1.0
	1143
	1144	!
[108]	1145	!-- Ocean version must use flux boundary conditions at the top
	1146	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1147	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1148	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1149	ENDIF
[97]	1150
	1151	!
[1]	1152	!-- In case of a given slope, compute the relevant quantities
	1153	IF ( alpha_surface /= 0.0 ) THEN
	1154	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1155	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1156	' ) must be < 90.0'
[226]	1157	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1158	ENDIF
	1159	sloping_surface = .TRUE.
	1160	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1161	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1162	ENDIF
	1163
	1164	!
	1165	!-- Check time step and cfl_factor
	1166	IF ( dt /= -1.0 ) THEN
	1167	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1168	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1169	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1170	ENDIF
	1171	dt_3d = dt
	1172	dt_fixed = .TRUE.
	1173	ENDIF
	1174
	1175	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1176	IF ( cfl_factor == -1.0 ) THEN
	1177	IF ( momentum_advec == 'ups-scheme' .OR. &
	1178	scalar_advec == 'ups-scheme' ) THEN
	1179	cfl_factor = 0.8
	1180	ELSE
	1181	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1182	cfl_factor = 0.8
	1183	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1184	cfl_factor = 0.9
	1185	ELSE
	1186	cfl_factor = 0.1
	1187	ENDIF
	1188	ENDIF
	1189	ELSE
[215]	1190	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1191	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1192	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1193	ENDIF
	1194	ENDIF
	1195
	1196	!
	1197	!-- Store simulated time at begin
	1198	simulated_time_at_begin = simulated_time
	1199
	1200	!
[291]	1201	!-- Store reference time for coupled runs and change the coupling flag,
	1202	!-- if ...
	1203	IF ( simulated_time == 0.0 ) THEN
	1204	IF ( coupling_start_time == 0.0 ) THEN
	1205	time_since_reference_point = 0.0
	1206	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1207	run_coupled = .FALSE.
	1208	ENDIF
	1209	ENDIF
	1210
	1211	!
[1]	1212	!-- Set wind speed in the Galilei-transformed system
	1213	IF ( galilei_transformation ) THEN
	1214	IF ( use_ug_for_galilei_tr .AND. &
	1215	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1216	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1217	u_gtrans = ug_surface
	1218	v_gtrans = vg_surface
	1219	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1220	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1221	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1222	' with galilei transformation'
[226]	1223	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1224	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1225	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1226	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1227	' with galilei transformation'
[226]	1228	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1229	ELSE
[215]	1230	message_string = 'variable translation speed used for galilei-' // &
	1231	'transformation, which may cause & instabilities in stably ' // &
	1232	'stratified regions'
[226]	1233	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1234	ENDIF
	1235	ENDIF
	1236
	1237	!
	1238	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1239	!-- fluxes have to be used in the diffusion-terms
	1240	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1241
	1242	!
	1243	!-- Check boundary conditions and set internal variables:
	1244	!-- Lateral boundary conditions
[73]	1245	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1246	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1247	message_string = 'unknown boundary condition: bc_lr = "' // &
	1248	TRIM( bc_lr ) // '"'
[226]	1249	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1250	ENDIF
[73]	1251	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1252	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1253	message_string = 'unknown boundary condition: bc_ns = "' // &
	1254	TRIM( bc_ns ) // '"'
[226]	1255	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1256	ENDIF
	1257
	1258	!
[366]	1259	!-- Internal variables used for speed optimization in if clauses
[707]	1260	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1261	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1262	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
	1263	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1264	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1265	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[366]	1266
	1267	!
[1]	1268	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1269	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1270	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1271	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1272	IF ( psolver /= 'multigrid' ) THEN
[215]	1273	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1274	'psolver = "' // TRIM( psolver ) // '"'
[226]	1275	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1276	ENDIF
[667]	1277	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1278	momentum_advec /= 'ws-scheme') THEN
[215]	1279	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1280	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1281	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1282	ENDIF
[667]	1283	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1284	scalar_advec /= 'ws-scheme' ) THEN
[215]	1285	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1286	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1287	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1288	ENDIF
[667]	1289	IF ( (scalar_advec == 'ws-scheme' .OR. momentum_advec == 'ws-scheme' ) &
	1290	.AND. loop_optimization == 'vector' ) THEN
	1291	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1292	'loop_optimization = vector and ' // &
	1293	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
	1294	! The error message number still needs modification.
	1295	CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 )
	1296	END IF
[1]	1297	IF ( galilei_transformation ) THEN
[215]	1298	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1299	'galilei_transformation = .T.'
[226]	1300	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1301	ENDIF
	1302	ENDIF
	1303
	1304	!
	1305	!-- Bottom boundary condition for the turbulent Kinetic energy
	1306	IF ( bc_e_b == 'neumann' ) THEN
	1307	ibc_e_b = 1
	1308	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1309	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1310	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1311	ENDIF
	1312	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1313	ibc_e_b = 2
	1314	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1315	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1316	TRIM( bc_e_b ) // '"'
[226]	1317	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1318	ENDIF
	1319	IF ( .NOT. prandtl_layer ) THEN
	1320	bc_e_b = 'neumann'
	1321	ibc_e_b = 1
[215]	1322	message_string = 'boundary condition bc_e_b changed to "' // &
	1323	TRIM( bc_e_b ) // '"'
[226]	1324	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1325	ENDIF
	1326	ELSE
[215]	1327	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1328	TRIM( bc_e_b ) // '"'
[226]	1329	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1330	ENDIF
	1331
	1332	!
	1333	!-- Boundary conditions for perturbation pressure
	1334	IF ( bc_p_b == 'dirichlet' ) THEN
	1335	ibc_p_b = 0
	1336	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1337	ibc_p_b = 1
	1338	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1339	ibc_p_b = 2
	1340	ELSE
[215]	1341	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1342	TRIM( bc_p_b ) // '"'
[226]	1343	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1344	ENDIF
	1345	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1346	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1347	'" not allowed with prandtl_layer = .FALSE.'
[226]	1348	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1349	ENDIF
	1350	IF ( bc_p_t == 'dirichlet' ) THEN
	1351	ibc_p_t = 0
	1352	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1353	ibc_p_t = 1
	1354	ELSE
[215]	1355	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1356	TRIM( bc_p_t ) // '"'
[226]	1357	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1358	ENDIF
	1359
	1360	!
	1361	!-- Boundary conditions for potential temperature
[102]	1362	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1363	ibc_pt_b = 2
[1]	1364	ELSE
[102]	1365	IF ( bc_pt_b == 'dirichlet' ) THEN
	1366	ibc_pt_b = 0
	1367	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1368	ibc_pt_b = 1
	1369	ELSE
[215]	1370	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1371	TRIM( bc_pt_b ) // '"'
[226]	1372	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1373	ENDIF
	1374	ENDIF
[102]	1375
[1]	1376	IF ( bc_pt_t == 'dirichlet' ) THEN
	1377	ibc_pt_t = 0
	1378	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1379	ibc_pt_t = 1
[19]	1380	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1381	ibc_pt_t = 2
[1]	1382	ELSE
[215]	1383	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1384	TRIM( bc_pt_t ) // '"'
[226]	1385	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1386	ENDIF
	1387
[20]	1388	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1389	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1390	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1391	top_momentumflux_v /= 9999999.9 ) THEN
	1392	constant_top_momentumflux = .TRUE.
	1393	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1394	top_momentumflux_v == 9999999.9 ) ) THEN
	1395	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1396	'must be set'
[226]	1397	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1398	ENDIF
[1]	1399
	1400	!
	1401	!-- A given surface temperature implies Dirichlet boundary condition for
	1402	!-- temperature. In this case specification of a constant heat flux is
	1403	!-- forbidden.
	1404	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1405	surface_heatflux /= 0.0 ) THEN
[215]	1406	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1407	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1408	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1409	ENDIF
	1410	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1411	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1412	'wed with pt_surface_initial_change (/=0) = ', &
	1413	pt_surface_initial_change
[226]	1414	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1415	ENDIF
	1416
	1417	!
[19]	1418	!-- A given temperature at the top implies Dirichlet boundary condition for
	1419	!-- temperature. In this case specification of a constant heat flux is
	1420	!-- forbidden.
	1421	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1422	top_heatflux /= 0.0 ) THEN
[215]	1423	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1424	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1425	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1426	ENDIF
	1427
	1428	!
[95]	1429	!-- Boundary conditions for salinity
	1430	IF ( ocean ) THEN
	1431	IF ( bc_sa_t == 'dirichlet' ) THEN
	1432	ibc_sa_t = 0
	1433	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1434	ibc_sa_t = 1
	1435	ELSE
[215]	1436	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1437	TRIM( bc_sa_t ) // '"'
[226]	1438	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1439	ENDIF
	1440
	1441	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1442	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1443	message_string = 'boundary condition: bc_sa_t = "' // &
	1444	TRIM( bc_sa_t ) // '" requires to set ' // &
	1445	'top_salinityflux'
[226]	1446	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1447	ENDIF
[95]	1448
	1449	!
	1450	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1451	!-- salinity. In this case specification of a constant salinity flux is
	1452	!-- forbidden.
	1453	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1454	top_salinityflux /= 0.0 ) THEN
[215]	1455	message_string = 'boundary condition: bc_sa_t = "' // &
	1456	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1457	'constant_top_salinityflux = .TRUE.'
[226]	1458	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1459	ENDIF
	1460
	1461	ENDIF
	1462
	1463	!
[75]	1464	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1465	!-- water content / scalar
[75]	1466	IF ( humidity .OR. passive_scalar ) THEN
	1467	IF ( humidity ) THEN
[1]	1468	sq = 'q'
	1469	ELSE
	1470	sq = 's'
	1471	ENDIF
	1472	IF ( bc_q_b == 'dirichlet' ) THEN
	1473	ibc_q_b = 0
	1474	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1475	ibc_q_b = 1
	1476	ELSE
[215]	1477	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1478	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1479	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1480	ENDIF
	1481	IF ( bc_q_t == 'dirichlet' ) THEN
	1482	ibc_q_t = 0
	1483	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1484	ibc_q_t = 1
	1485	ELSE
[215]	1486	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1487	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1488	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1489	ENDIF
	1490
[600]	1491	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1492
	1493	!
	1494	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1495	!-- humidity. In this case specification of a constant water flux is
[1]	1496	!-- forbidden.
	1497	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1498	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1499	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1500	'th prescribed surface flux'
[226]	1501	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1502	ENDIF
	1503	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1504	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1505	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1506	q_surface_initial_change
[226]	1507	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1508	ENDIF
	1509
	1510	ENDIF
	1511
	1512	!
	1513	!-- Boundary conditions for horizontal components of wind speed
	1514	IF ( bc_uv_b == 'dirichlet' ) THEN
	1515	ibc_uv_b = 0
	1516	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1517	ibc_uv_b = 1
	1518	IF ( prandtl_layer ) THEN
[215]	1519	message_string = 'boundary condition: bc_uv_b = "' // &
	1520	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1521	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1522	ENDIF
	1523	ELSE
[215]	1524	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1525	TRIM( bc_uv_b ) // '"'
[226]	1526	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1527	ENDIF
[667]	1528	!
	1529	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1530	!-- assigned with the u and v values of the ocean surface
	1531	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1532	ibc_uv_b = 2
	1533	ENDIF
[215]	1534
[108]	1535	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1536	bc_uv_t = 'neumann'
[1]	1537	ibc_uv_t = 1
	1538	ELSE
[132]	1539	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1540	ibc_uv_t = 0
	1541	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1542	ibc_uv_t = 1
	1543	ELSE
[215]	1544	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1545	TRIM( bc_uv_t ) // '"'
[226]	1546	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1547	ENDIF
	1548	ENDIF
	1549
	1550	!
	1551	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1552	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1553	IF ( momentum_advec == 'ups-scheme' ) THEN
	1554	rayleigh_damping_factor = 0.01
	1555	ELSE
	1556	rayleigh_damping_factor = 0.0
	1557	ENDIF
	1558	ELSE
	1559	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1560	THEN
[215]	1561	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1562	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1563	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1564	ENDIF
	1565	ENDIF
	1566
	1567	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1568	IF ( .NOT. ocean ) THEN
	1569	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1570	ELSE
	1571	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1572	ENDIF
[1]	1573	ELSE
[108]	1574	IF ( .NOT. ocean ) THEN
	1575	IF ( rayleigh_damping_height < 0.0 .OR. &
	1576	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1577	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1578	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1579	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1580	ENDIF
[108]	1581	ELSE
	1582	IF ( rayleigh_damping_height > 0.0 .OR. &
	1583	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1584	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1585	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1586	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1587	ENDIF
[1]	1588	ENDIF
	1589	ENDIF
	1590
	1591	!
	1592	!-- Check limiters for Upstream-Spline scheme
	1593	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1594	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1595	overshoot_limit_e < 0.0 ) THEN
[215]	1596	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1597	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1598	ENDIF
	1599	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1600	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1601	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1602	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1603	ENDIF
	1604
	1605	!
	1606	!-- Check number of chosen statistic regions. More than 10 regions are not
	1607	!-- allowed, because so far no more than 10 corresponding output files can
	1608	!-- be opened (cf. check_open)
	1609	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1610	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1611	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1612	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1613	ENDIF
	1614	IF ( normalizing_region > statistic_regions .OR. &
	1615	normalizing_region < 0) THEN
[215]	1616	WRITE ( message_string, * ) 'normalizing_region = ', &
	1617	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1618	' (value of statistic_regions)'
[226]	1619	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1620	ENDIF
	1621
	1622	!
[116]	1623	!-- Check the interval for sorting particles.
	1624	!-- Using particles as cloud droplets requires sorting after each timestep.
	1625	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1626	dt_sort_particles = 0.0
[215]	1627	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1628	'_droplets = .TRUE.'
[226]	1629	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1630	ENDIF
	1631
	1632	!
[1]	1633	!-- Set the default intervals for data output, if necessary
	1634	!-- NOTE: dt_dosp has already been set in package_parin
	1635	IF ( dt_data_output /= 9999999.9 ) THEN
	1636	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1637	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1638	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1639	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1640	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1641	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1642	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1643	DO mid = 1, max_masks
[410]	1644	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1645	ENDDO
[1]	1646	ENDIF
	1647
	1648	!
	1649	!-- Set the default skip time intervals for data output, if necessary
	1650	IF ( skip_time_dopr == 9999999.9 ) &
	1651	skip_time_dopr = skip_time_data_output
	1652	IF ( skip_time_dosp == 9999999.9 ) &
	1653	skip_time_dosp = skip_time_data_output
	1654	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1655	skip_time_do2d_xy = skip_time_data_output
	1656	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1657	skip_time_do2d_xz = skip_time_data_output
	1658	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1659	skip_time_do2d_yz = skip_time_data_output
	1660	IF ( skip_time_do3d == 9999999.9 ) &
	1661	skip_time_do3d = skip_time_data_output
	1662	IF ( skip_time_data_output_av == 9999999.9 ) &
	1663	skip_time_data_output_av = skip_time_data_output
[564]	1664	DO mid = 1, max_masks
[410]	1665	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1666	skip_time_domask(mid) = skip_time_data_output
	1667	ENDDO
[1]	1668
	1669	!
	1670	!-- Check the average intervals (first for 3d-data, then for profiles and
	1671	!-- spectra)
	1672	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1673	WRITE( message_string, * ) 'averaging_interval = ', &
	1674	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1675	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1676	ENDIF
	1677
	1678	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1679	averaging_interval_pr = averaging_interval
	1680	ENDIF
	1681
	1682	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1683	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1684	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1685	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1686	ENDIF
	1687
	1688	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1689	averaging_interval_sp = averaging_interval
	1690	ENDIF
	1691
	1692	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1693	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1694	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1695	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1696	ENDIF
	1697
	1698	!
	1699	!-- Set the default interval for profiles entering the temporal average
	1700	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1701	dt_averaging_input_pr = dt_averaging_input
	1702	ENDIF
	1703
	1704	!
	1705	!-- Set the default interval for the output of timeseries to a reasonable
	1706	!-- value (tries to minimize the number of calls of flow_statistics)
	1707	IF ( dt_dots == 9999999.9 ) THEN
	1708	IF ( averaging_interval_pr == 0.0 ) THEN
	1709	dt_dots = MIN( dt_run_control, dt_dopr )
	1710	ELSE
	1711	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1712	ENDIF
	1713	ENDIF
	1714
	1715	!
	1716	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1717	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1718	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1719	dt_averaging_input, ' must be <= averaging_interval = ', &
	1720	averaging_interval
[226]	1721	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1722	ENDIF
	1723
	1724	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1725	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1726	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1727	averaging_interval_pr
[226]	1728	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1729	ENDIF
	1730
	1731	!
[72]	1732	!-- Set the default value for the integration interval of precipitation amount
	1733	IF ( precipitation ) THEN
	1734	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1735	precipitation_amount_interval = dt_do2d_xy
	1736	ELSE
	1737	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1738	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1739	precipitation_amount_interval, ' must not be larger than ', &
	1740	'dt_do2d_xy = ', dt_do2d_xy
[226]	1741	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1742	ENDIF
	1743	ENDIF
	1744	ENDIF
	1745
	1746	!
[1]	1747	!-- Determine the number of output profiles and check whether they are
	1748	!-- permissible
	1749	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1750
	1751	dopr_n = dopr_n + 1
	1752	i = dopr_n
	1753
	1754	!
	1755	!-- Determine internal profile number (for hom, homs)
	1756	!-- and store height levels
	1757	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1758
	1759	CASE ( 'u', '#u' )
	1760	dopr_index(i) = 1
[87]	1761	dopr_unit(i) = 'm/s'
[1]	1762	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1763	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1764	dopr_initial_index(i) = 5
	1765	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1766	data_output_pr(i) = data_output_pr(i)(2:)
	1767	ENDIF
	1768
	1769	CASE ( 'v', '#v' )
	1770	dopr_index(i) = 2
[87]	1771	dopr_unit(i) = 'm/s'
	1772	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1773	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1774	dopr_initial_index(i) = 6
	1775	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1776	data_output_pr(i) = data_output_pr(i)(2:)
	1777	ENDIF
	1778
	1779	CASE ( 'w' )
	1780	dopr_index(i) = 3
[87]	1781	dopr_unit(i) = 'm/s'
	1782	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1783
	1784	CASE ( 'pt', '#pt' )
	1785	IF ( .NOT. cloud_physics ) THEN
	1786	dopr_index(i) = 4
[87]	1787	dopr_unit(i) = 'K'
[1]	1788	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1789	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1790	dopr_initial_index(i) = 7
	1791	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1792	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1793	data_output_pr(i) = data_output_pr(i)(2:)
	1794	ENDIF
	1795	ELSE
	1796	dopr_index(i) = 43
[87]	1797	dopr_unit(i) = 'K'
[1]	1798	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1799	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1800	dopr_initial_index(i) = 28
	1801	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1802	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1803	data_output_pr(i) = data_output_pr(i)(2:)
	1804	ENDIF
	1805	ENDIF
	1806
	1807	CASE ( 'e' )
	1808	dopr_index(i) = 8
[87]	1809	dopr_unit(i) = 'm2/s2'
[1]	1810	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1811	hom(nzb,2,8,:) = 0.0
	1812
	1813	CASE ( 'km', '#km' )
	1814	dopr_index(i) = 9
[87]	1815	dopr_unit(i) = 'm2/s'
[1]	1816	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1817	hom(nzb,2,9,:) = 0.0
	1818	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1819	dopr_initial_index(i) = 23
	1820	hom(:,2,23,:) = hom(:,2,9,:)
	1821	data_output_pr(i) = data_output_pr(i)(2:)
	1822	ENDIF
	1823
	1824	CASE ( 'kh', '#kh' )
	1825	dopr_index(i) = 10
[87]	1826	dopr_unit(i) = 'm2/s'
[1]	1827	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1828	hom(nzb,2,10,:) = 0.0
	1829	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1830	dopr_initial_index(i) = 24
	1831	hom(:,2,24,:) = hom(:,2,10,:)
	1832	data_output_pr(i) = data_output_pr(i)(2:)
	1833	ENDIF
	1834
	1835	CASE ( 'l', '#l' )
	1836	dopr_index(i) = 11
[87]	1837	dopr_unit(i) = 'm'
[1]	1838	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1839	hom(nzb,2,11,:) = 0.0
	1840	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1841	dopr_initial_index(i) = 25
	1842	hom(:,2,25,:) = hom(:,2,11,:)
	1843	data_output_pr(i) = data_output_pr(i)(2:)
	1844	ENDIF
	1845
	1846	CASE ( 'w"u"' )
	1847	dopr_index(i) = 12
[87]	1848	dopr_unit(i) = 'm2/s2'
[1]	1849	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1850	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1851
	1852	CASE ( 'wu' )
	1853	dopr_index(i) = 13
[87]	1854	dopr_unit(i) = 'm2/s2'
[1]	1855	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1856
	1857	CASE ( 'w"v"' )
	1858	dopr_index(i) = 14
[87]	1859	dopr_unit(i) = 'm2/s2'
[1]	1860	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1861	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1862
	1863	CASE ( 'wv' )
	1864	dopr_index(i) = 15
[87]	1865	dopr_unit(i) = 'm2/s2'
[1]	1866	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1867
	1868	CASE ( 'w"pt"' )
	1869	dopr_index(i) = 16
[87]	1870	dopr_unit(i) = 'K m/s'
[1]	1871	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1872
	1873	CASE ( 'wpt' )
	1874	dopr_index(i) = 17
[87]	1875	dopr_unit(i) = 'K m/s'
[1]	1876	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1877
	1878	CASE ( 'wpt' )
	1879	dopr_index(i) = 18
[87]	1880	dopr_unit(i) = 'K m/s'
[1]	1881	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1882
	1883	CASE ( 'wu' )
	1884	dopr_index(i) = 19
[87]	1885	dopr_unit(i) = 'm2/s2'
[1]	1886	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1887	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1888
	1889	CASE ( 'wv' )
	1890	dopr_index(i) = 20
[87]	1891	dopr_unit(i) = 'm2/s2'
[1]	1892	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1893	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1894
	1895	CASE ( 'wptBC' )
	1896	dopr_index(i) = 21
[87]	1897	dopr_unit(i) = 'K m/s'
[1]	1898	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1899
	1900	CASE ( 'wptBC' )
	1901	dopr_index(i) = 22
[87]	1902	dopr_unit(i) = 'K m/s'
[1]	1903	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1904
[96]	1905	CASE ( 'sa', '#sa' )
	1906	IF ( .NOT. ocean ) THEN
[215]	1907	message_string = 'data_output_pr = ' // &
	1908	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1909	'lemented for ocean = .FALSE.'
[226]	1910	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1911	ELSE
	1912	dopr_index(i) = 23
	1913	dopr_unit(i) = 'psu'
	1914	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1915	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1916	dopr_initial_index(i) = 26
	1917	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1918	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1919	data_output_pr(i) = data_output_pr(i)(2:)
	1920	ENDIF
	1921	ENDIF
	1922
[1]	1923	CASE ( 'u*2' )
	1924	dopr_index(i) = 30
[87]	1925	dopr_unit(i) = 'm2/s2'
[1]	1926	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1927
	1928	CASE ( 'v*2' )
	1929	dopr_index(i) = 31
[87]	1930	dopr_unit(i) = 'm2/s2'
[1]	1931	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1932
	1933	CASE ( 'w*2' )
	1934	dopr_index(i) = 32
[87]	1935	dopr_unit(i) = 'm2/s2'
[1]	1936	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1937
	1938	CASE ( 'pt*2' )
	1939	dopr_index(i) = 33
[87]	1940	dopr_unit(i) = 'K2'
[1]	1941	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1942
	1943	CASE ( 'e*' )
	1944	dopr_index(i) = 34
[87]	1945	dopr_unit(i) = 'm2/s2'
[1]	1946	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1947
	1948	CASE ( 'w2pt' )
	1949	dopr_index(i) = 35
[87]	1950	dopr_unit(i) = 'K m2/s2'
[1]	1951	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1952
	1953	CASE ( 'wpt2' )
	1954	dopr_index(i) = 36
[87]	1955	dopr_unit(i) = 'K2 m/s'
[1]	1956	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1957
	1958	CASE ( 'we' )
	1959	dopr_index(i) = 37
[87]	1960	dopr_unit(i) = 'm3/s3'
[1]	1961	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1962
	1963	CASE ( 'w*3' )
	1964	dopr_index(i) = 38
[87]	1965	dopr_unit(i) = 'm3/s3'
[1]	1966	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1967
	1968	CASE ( 'Sw' )
	1969	dopr_index(i) = 39
[89]	1970	dopr_unit(i) = 'none'
[1]	1971	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1972
[232]	1973	CASE ( 'p' )
	1974	dopr_index(i) = 40
	1975	dopr_unit(i) = 'Pa'
	1976	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1977
[1]	1978	CASE ( 'q', '#q' )
[108]	1979	IF ( .NOT. humidity ) THEN
[215]	1980	message_string = 'data_output_pr = ' // &
	1981	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1982	'lemented for humidity = .FALSE.'
[226]	1983	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1984	ELSE
	1985	dopr_index(i) = 41
[87]	1986	dopr_unit(i) = 'kg/kg'
	1987	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1988	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1989	dopr_initial_index(i) = 26
	1990	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1991	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1992	data_output_pr(i) = data_output_pr(i)(2:)
	1993	ENDIF
	1994	ENDIF
	1995
	1996	CASE ( 's', '#s' )
	1997	IF ( .NOT. passive_scalar ) THEN
[215]	1998	message_string = 'data_output_pr = ' // &
	1999	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2000	'lemented for passive_scalar = .FALSE.'
[226]	2001	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2002	ELSE
	2003	dopr_index(i) = 41
[87]	2004	dopr_unit(i) = 'kg/m3'
	2005	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2006	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2007	dopr_initial_index(i) = 26
	2008	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2009	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2010	data_output_pr(i) = data_output_pr(i)(2:)
	2011	ENDIF
	2012	ENDIF
	2013
	2014	CASE ( 'qv', '#qv' )
	2015	IF ( .NOT. cloud_physics ) THEN
	2016	dopr_index(i) = 41
[87]	2017	dopr_unit(i) = 'kg/kg'
	2018	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2019	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2020	dopr_initial_index(i) = 26
	2021	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2022	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2023	data_output_pr(i) = data_output_pr(i)(2:)
	2024	ENDIF
	2025	ELSE
	2026	dopr_index(i) = 42
[87]	2027	dopr_unit(i) = 'kg/kg'
	2028	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2029	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2030	dopr_initial_index(i) = 27
	2031	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2032	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2033	data_output_pr(i) = data_output_pr(i)(2:)
	2034	ENDIF
	2035	ENDIF
	2036
	2037	CASE ( 'lpt', '#lpt' )
	2038	IF ( .NOT. cloud_physics ) THEN
[215]	2039	message_string = 'data_output_pr = ' // &
	2040	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2041	'lemented for cloud_physics = .FALSE.'
[226]	2042	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2043	ELSE
	2044	dopr_index(i) = 4
[87]	2045	dopr_unit(i) = 'K'
[1]	2046	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2047	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2048	dopr_initial_index(i) = 7
	2049	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2050	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2051	data_output_pr(i) = data_output_pr(i)(2:)
	2052	ENDIF
	2053	ENDIF
	2054
	2055	CASE ( 'vpt', '#vpt' )
	2056	dopr_index(i) = 44
[87]	2057	dopr_unit(i) = 'K'
	2058	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2059	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2060	dopr_initial_index(i) = 29
	2061	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2062	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2063	data_output_pr(i) = data_output_pr(i)(2:)
	2064	ENDIF
	2065
	2066	CASE ( 'w"vpt"' )
	2067	dopr_index(i) = 45
[87]	2068	dopr_unit(i) = 'K m/s'
[1]	2069	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2070
	2071	CASE ( 'wvpt' )
	2072	dopr_index(i) = 46
[87]	2073	dopr_unit(i) = 'K m/s'
[1]	2074	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2075
	2076	CASE ( 'wvpt' )
	2077	dopr_index(i) = 47
[87]	2078	dopr_unit(i) = 'K m/s'
[1]	2079	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2080
	2081	CASE ( 'w"q"' )
[108]	2082	IF ( .NOT. humidity ) THEN
[215]	2083	message_string = 'data_output_pr = ' // &
	2084	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2085	'lemented for humidity = .FALSE.'
[226]	2086	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2087	ELSE
	2088	dopr_index(i) = 48
[87]	2089	dopr_unit(i) = 'kg/kg m/s'
[1]	2090	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2091	ENDIF
	2092
	2093	CASE ( 'wq' )
[108]	2094	IF ( .NOT. humidity ) THEN
[215]	2095	message_string = 'data_output_pr = ' // &
	2096	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2097	'lemented for humidity = .FALSE.'
[226]	2098	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2099	ELSE
	2100	dopr_index(i) = 49
[87]	2101	dopr_unit(i) = 'kg/kg m/s'
[1]	2102	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2103	ENDIF
	2104
	2105	CASE ( 'wq' )
[108]	2106	IF ( .NOT. humidity ) THEN
[215]	2107	message_string = 'data_output_pr = ' // &
	2108	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2109	'lemented for humidity = .FALSE.'
[226]	2110	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2111	ELSE
	2112	dopr_index(i) = 50
[87]	2113	dopr_unit(i) = 'kg/kg m/s'
[1]	2114	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2115	ENDIF
	2116
	2117	CASE ( 'w"s"' )
	2118	IF ( .NOT. passive_scalar ) THEN
[215]	2119	message_string = 'data_output_pr = ' // &
	2120	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2121	'lemented for passive_scalar = .FALSE.'
[226]	2122	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2123	ELSE
	2124	dopr_index(i) = 48
[87]	2125	dopr_unit(i) = 'kg/m3 m/s'
[1]	2126	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2127	ENDIF
	2128
	2129	CASE ( 'ws' )
	2130	IF ( .NOT. passive_scalar ) THEN
[215]	2131	message_string = 'data_output_pr = ' // &
	2132	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2133	'lemented for passive_scalar = .FALSE.'
[226]	2134	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2135	ELSE
	2136	dopr_index(i) = 49
[87]	2137	dopr_unit(i) = 'kg/m3 m/s'
[1]	2138	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2139	ENDIF
	2140
	2141	CASE ( 'ws' )
	2142	IF ( .NOT. passive_scalar ) THEN
[215]	2143	message_string = 'data_output_pr = ' // &
	2144	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2145	'lemented for passive_scalar = .FALSE.'
[226]	2146	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2147	ELSE
	2148	dopr_index(i) = 50
[87]	2149	dopr_unit(i) = 'kg/m3 m/s'
[1]	2150	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2151	ENDIF
	2152
	2153	CASE ( 'w"qv"' )
[75]	2154	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2155	THEN
	2156	dopr_index(i) = 48
[87]	2157	dopr_unit(i) = 'kg/kg m/s'
[1]	2158	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2159	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2160	dopr_index(i) = 51
[87]	2161	dopr_unit(i) = 'kg/kg m/s'
[1]	2162	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2163	ELSE
[215]	2164	message_string = 'data_output_pr = ' // &
	2165	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2166	'lemented for cloud_physics = .FALSE. an&' // &
	2167	'd humidity = .FALSE.'
[226]	2168	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2169	ENDIF
	2170
	2171	CASE ( 'wqv' )
[75]	2172	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2173	THEN
	2174	dopr_index(i) = 49
[87]	2175	dopr_unit(i) = 'kg/kg m/s'
[1]	2176	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2177	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2178	dopr_index(i) = 52
[87]	2179	dopr_unit(i) = 'kg/kg m/s'
[1]	2180	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2181	ELSE
[215]	2182	message_string = 'data_output_pr = ' // &
	2183	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2184	'lemented for cloud_physics = .FALSE. an&' // &
	2185	'd humidity = .FALSE.'
[226]	2186	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2187	ENDIF
	2188
	2189	CASE ( 'wqv' )
[75]	2190	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2191	THEN
	2192	dopr_index(i) = 50
[87]	2193	dopr_unit(i) = 'kg/kg m/s'
[1]	2194	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2195	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2196	dopr_index(i) = 53
[87]	2197	dopr_unit(i) = 'kg/kg m/s'
[1]	2198	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2199	ELSE
[215]	2200	message_string = 'data_output_pr = ' // &
	2201	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2202	'lemented for cloud_physics = .FALSE. an&' // &
	2203	'd humidity = .FALSE.'
[226]	2204	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2205	ENDIF
	2206
	2207	CASE ( 'ql' )
	2208	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2209	message_string = 'data_output_pr = ' // &
	2210	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2211	'lemented for cloud_physics = .FALSE. or' // &
	2212	'&cloud_droplets = .FALSE.'
[226]	2213	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2214	ELSE
	2215	dopr_index(i) = 54
[87]	2216	dopr_unit(i) = 'kg/kg'
[1]	2217	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2218	ENDIF
	2219
[524]	2220	CASE ( 'wuu*:dz' )
[1]	2221	dopr_index(i) = 55
[87]	2222	dopr_unit(i) = 'm2/s3'
[1]	2223	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2224
[524]	2225	CASE ( 'wp:dz' )
[1]	2226	dopr_index(i) = 56
[87]	2227	dopr_unit(i) = 'm2/s3'
[106]	2228	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2229
[524]	2230	CASE ( 'w"e:dz' )
[1]	2231	dopr_index(i) = 57
[87]	2232	dopr_unit(i) = 'm2/s3'
[1]	2233	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2234
[667]	2235
[1]	2236	CASE ( 'u"pt"' )
	2237	dopr_index(i) = 58
[87]	2238	dopr_unit(i) = 'K m/s'
[1]	2239	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2240
	2241	CASE ( 'upt' )
	2242	dopr_index(i) = 59
[87]	2243	dopr_unit(i) = 'K m/s'
[1]	2244	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2245
	2246	CASE ( 'upt_t' )
	2247	dopr_index(i) = 60
[87]	2248	dopr_unit(i) = 'K m/s'
[1]	2249	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2250
	2251	CASE ( 'v"pt"' )
	2252	dopr_index(i) = 61
[87]	2253	dopr_unit(i) = 'K m/s'
[1]	2254	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2255
	2256	CASE ( 'vpt' )
	2257	dopr_index(i) = 62
[87]	2258	dopr_unit(i) = 'K m/s'
[1]	2259	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2260
	2261	CASE ( 'vpt_t' )
	2262	dopr_index(i) = 63
[87]	2263	dopr_unit(i) = 'K m/s'
[1]	2264	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2265
[96]	2266	CASE ( 'rho' )
[388]	2267	IF ( .NOT. ocean ) THEN
	2268	message_string = 'data_output_pr = ' // &
	2269	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2270	'lemented for ocean = .FALSE.'
	2271	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2272	ELSE
	2273	dopr_index(i) = 64
	2274	dopr_unit(i) = 'kg/m3'
	2275	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2276	ENDIF
[1]	2277
[96]	2278	CASE ( 'w"sa"' )
	2279	IF ( .NOT. ocean ) THEN
[215]	2280	message_string = 'data_output_pr = ' // &
	2281	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2282	'lemented for ocean = .FALSE.'
[226]	2283	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2284	ELSE
	2285	dopr_index(i) = 65
	2286	dopr_unit(i) = 'psu m/s'
	2287	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2288	ENDIF
	2289
	2290	CASE ( 'wsa' )
	2291	IF ( .NOT. ocean ) THEN
[215]	2292	message_string = 'data_output_pr = ' // &
	2293	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2294	'lemented for ocean = .FALSE.'
[226]	2295	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2296	ELSE
	2297	dopr_index(i) = 66
	2298	dopr_unit(i) = 'psu m/s'
	2299	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2300	ENDIF
	2301
	2302	CASE ( 'wsa' )
	2303	IF ( .NOT. ocean ) THEN
[215]	2304	message_string = 'data_output_pr = ' // &
	2305	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2306	'lemented for ocean = .FALSE.'
[226]	2307	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2308	ELSE
	2309	dopr_index(i) = 67
	2310	dopr_unit(i) = 'psu m/s'
	2311	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2312	ENDIF
	2313
[106]	2314	CASE ( 'wp' )
	2315	dopr_index(i) = 68
	2316	dopr_unit(i) = 'm3/s3'
	2317	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2318
[106]	2319	CASE ( 'w"e' )
	2320	dopr_index(i) = 69
	2321	dopr_unit(i) = 'm3/s3'
	2322	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2323
[197]	2324	CASE ( 'q*2' )
	2325	IF ( .NOT. humidity ) THEN
[215]	2326	message_string = 'data_output_pr = ' // &
	2327	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2328	'lemented for humidity = .FALSE.'
[226]	2329	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2330	ELSE
	2331	dopr_index(i) = 70
	2332	dopr_unit(i) = 'kg2/kg2'
	2333	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2334	ENDIF
[106]	2335
[388]	2336	CASE ( 'prho' )
	2337	IF ( .NOT. ocean ) THEN
	2338	message_string = 'data_output_pr = ' // &
	2339	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2340	'lemented for ocean = .FALSE.'
	2341	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2342	ELSE
	2343	dopr_index(i) = 71
	2344	dopr_unit(i) = 'kg/m3'
	2345	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2346	ENDIF
	2347
	2348	CASE ( 'hyp' )
	2349	dopr_index(i) = 72
[531]	2350	dopr_unit(i) = 'dbar'
[388]	2351	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2352
[1]	2353	CASE DEFAULT
[87]	2354
	2355	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2356
	2357	IF ( unit == 'illegal' ) THEN
[215]	2358	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2359	message_string = 'illegal value for data_output_pr or ' // &
	2360	'data_output_pr_user = "' // &
	2361	TRIM( data_output_pr(i) ) // '"'
[226]	2362	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2363	ELSE
	2364	message_string = 'illegal value for data_output_pr = "' // &
	2365	TRIM( data_output_pr(i) ) // '"'
[226]	2366	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2367	ENDIF
[1]	2368	ENDIF
	2369
	2370	END SELECT
[667]	2371
[1]	2372	!
	2373	!-- Check to which of the predefined coordinate systems the profile belongs
	2374	DO k = 1, crmax
	2375	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2376	/=0 ) &
	2377	THEN
	2378	dopr_crossindex(i) = k
	2379	EXIT
	2380	ENDIF
	2381	ENDDO
	2382	!
	2383	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2384	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2385	!-- control characters
	2386	dopr_label(i) = data_output_pr(i)
	2387	position = INDEX( dopr_label(i) , '"' )
	2388	DO WHILE ( position /= 0 )
	2389	dopr_label(i)(position:position) = ''''
	2390	position = INDEX( dopr_label(i) , '"' )
	2391	ENDDO
	2392
	2393	ENDDO
	2394
	2395	!
	2396	!-- y-value range of the coordinate system (PROFIL).
	2397	!-- x-value range determined in plot_1d.
[94]	2398	IF ( .NOT. ocean ) THEN
	2399	cross_uymin = 0.0
	2400	IF ( z_max_do1d == -1.0 ) THEN
	2401	cross_uymax = zu(nzt+1)
	2402	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2403	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2404	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2405	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2406	ELSE
	2407	cross_uymax = z_max_do1d
	2408	ENDIF
[1]	2409	ENDIF
	2410
	2411	!
	2412	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2413	!-- permissible
	2414	DO i = 1, crmax
	2415	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2416
	2417	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2418	j = 0
	2419
	2420	CASE DEFAULT
[215]	2421	message_string = 'unknown normalization method cross_normali' // &
	2422	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2423	'"'
[226]	2424	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2425
	2426	END SELECT
	2427	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2428
	2429	CASE ( '', 'z_i' )
	2430	j = 0
	2431
	2432	CASE DEFAULT
[215]	2433	message_string = 'unknown normalization method cross_normali' // &
	2434	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2435	'"'
[226]	2436	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2437
	2438	END SELECT
	2439	ENDDO
	2440	!
	2441	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2442	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2443	THEN
[215]	2444	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2445	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2446	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2447	ENDIF
	2448
	2449
	2450	!
	2451	!-- Append user-defined data output variables to the standard data output
	2452	IF ( data_output_user(1) /= ' ' ) THEN
	2453	i = 1
	2454	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2455	i = i + 1
	2456	ENDDO
	2457	j = 1
	2458	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2459	IF ( i > 100 ) THEN
[215]	2460	message_string = 'number of output quantitities given by data' // &
	2461	'_output and data_output_user exceeds the limit of 100'
[226]	2462	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2463	ENDIF
	2464	data_output(i) = data_output_user(j)
	2465	i = i + 1
	2466	j = j + 1
	2467	ENDDO
	2468	ENDIF
	2469
	2470	!
	2471	!-- Check and set steering parameters for 2d/3d data output and averaging
	2472	i = 1
	2473	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2474	!
	2475	!-- Check for data averaging
	2476	ilen = LEN_TRIM( data_output(i) )
	2477	j = 0 ! no data averaging
	2478	IF ( ilen > 3 ) THEN
	2479	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2480	j = 1 ! data averaging
	2481	data_output(i) = data_output(i)(1:ilen-3)
	2482	ENDIF
	2483	ENDIF
	2484	!
	2485	!-- Check for cross section or volume data
	2486	ilen = LEN_TRIM( data_output(i) )
	2487	k = 0 ! 3d data
	2488	var = data_output(i)(1:ilen)
	2489	IF ( ilen > 3 ) THEN
	2490	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2491	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2492	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2493	k = 1 ! 2d data
	2494	var = data_output(i)(1:ilen-3)
	2495	ENDIF
	2496	ENDIF
	2497	!
	2498	!-- Check for allowed value and set units
	2499	SELECT CASE ( TRIM( var ) )
	2500
	2501	CASE ( 'e' )
	2502	IF ( constant_diffusion ) THEN
[215]	2503	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2504	'res constant_diffusion = .FALSE.'
[226]	2505	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2506	ENDIF
	2507	unit = 'm2/s2'
	2508
	2509	CASE ( 'pc', 'pr' )
	2510	IF ( .NOT. particle_advection ) THEN
[215]	2511	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2512	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2513	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2514	ENDIF
	2515	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2516	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2517
	2518	CASE ( 'q', 'vpt' )
[75]	2519	IF ( .NOT. humidity ) THEN
[215]	2520	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2521	'res humidity = .TRUE.'
[226]	2522	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2523	ENDIF
	2524	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2525	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2526
	2527	CASE ( 'ql' )
	2528	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2529	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2530	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2531	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2532	ENDIF
	2533	unit = 'kg/kg'
	2534
	2535	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2536	IF ( .NOT. cloud_droplets ) THEN
[215]	2537	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2538	'res cloud_droplets = .TRUE.'
[226]	2539	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2540	ENDIF
	2541	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2542	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2543	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2544
	2545	CASE ( 'qv' )
	2546	IF ( .NOT. cloud_physics ) THEN
[215]	2547	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2548	'res cloud_physics = .TRUE.'
[226]	2549	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2550	ENDIF
	2551	unit = 'kg/kg'
	2552
[96]	2553	CASE ( 'rho' )
	2554	IF ( .NOT. ocean ) THEN
[215]	2555	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2556	'res ocean = .TRUE.'
[226]	2557	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2558	ENDIF
	2559	unit = 'kg/m3'
	2560
[1]	2561	CASE ( 's' )
	2562	IF ( .NOT. passive_scalar ) THEN
[215]	2563	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2564	'res passive_scalar = .TRUE.'
[226]	2565	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2566	ENDIF
	2567	unit = 'conc'
	2568
[96]	2569	CASE ( 'sa' )
	2570	IF ( .NOT. ocean ) THEN
[215]	2571	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2572	'res ocean = .TRUE.'
[226]	2573	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2574	ENDIF
	2575	unit = 'psu'
	2576
[354]	2577	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2578	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2579	message_string = 'illegal value for data_output: "' // &
	2580	TRIM( var ) // '" & only 2d-horizontal ' // &
	2581	'cross sections are allowed for this value'
[226]	2582	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2583	ENDIF
	2584	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2585	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2586	'res cloud_physics = .TRUE.'
[226]	2587	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2588	ENDIF
[72]	2589	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2590	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2591	'res precipitation = .TRUE.'
[226]	2592	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2593	ENDIF
	2594	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2595	message_string = 'temporal averaging of precipitation ' // &
	2596	'amount "' // TRIM( var ) // '" is not possible'
[226]	2597	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2598	ENDIF
	2599	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2600	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2601	'res precipitation = .TRUE.'
[226]	2602	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2603	ENDIF
[354]	2604	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2605	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2606	'res humidity = .TRUE.'
	2607	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2608	ENDIF
[72]	2609
[354]	2610	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2611	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2612	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2613	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2614	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2615	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2616	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2617	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2618
[1]	2619
	2620	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2621	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2622	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2623	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2624	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2625	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2626	CONTINUE
	2627
	2628	CASE DEFAULT
	2629	CALL user_check_data_output( var, unit )
	2630
	2631	IF ( unit == 'illegal' ) THEN
[215]	2632	IF ( data_output_user(1) /= ' ' ) THEN
	2633	message_string = 'illegal value for data_output or ' // &
	2634	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2635	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2636	ELSE
	2637	message_string = 'illegal value for data_output =' // &
	2638	TRIM( data_output(i) ) // '"'
[226]	2639	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2640	ENDIF
	2641	ENDIF
	2642
	2643	END SELECT
	2644	!
	2645	!-- Set the internal steering parameters appropriately
	2646	IF ( k == 0 ) THEN
	2647	do3d_no(j) = do3d_no(j) + 1
	2648	do3d(j,do3d_no(j)) = data_output(i)
	2649	do3d_unit(j,do3d_no(j)) = unit
	2650	ELSE
	2651	do2d_no(j) = do2d_no(j) + 1
	2652	do2d(j,do2d_no(j)) = data_output(i)
	2653	do2d_unit(j,do2d_no(j)) = unit
	2654	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2655	data_output_xy(j) = .TRUE.
	2656	ENDIF
	2657	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2658	data_output_xz(j) = .TRUE.
	2659	ENDIF
	2660	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2661	data_output_yz(j) = .TRUE.
	2662	ENDIF
	2663	ENDIF
	2664
	2665	IF ( j == 1 ) THEN
	2666	!
	2667	!-- Check, if variable is already subject to averaging
	2668	found = .FALSE.
	2669	DO k = 1, doav_n
	2670	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2671	ENDDO
	2672
	2673	IF ( .NOT. found ) THEN
	2674	doav_n = doav_n + 1
	2675	doav(doav_n) = var
	2676	ENDIF
	2677	ENDIF
	2678
	2679	i = i + 1
	2680	ENDDO
	2681
	2682	!
[376]	2683	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2684	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2685	WRITE( message_string, * ) 'output of averaged quantity "', &
	2686	TRIM( doav(1) ), '_av" requires to set a ', &
	2687	'non-zero & averaging interval'
	2688	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2689	ENDIF
	2690
	2691	!
[308]	2692	!-- Check sectional planes and store them in one shared array
	2693	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2694	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2695	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2696	ENDIF
	2697	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2698	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2699	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2700	ENDIF
	2701	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2702	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2703	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2704	ENDIF
[1]	2705	section(:,1) = section_xy
	2706	section(:,2) = section_xz
	2707	section(:,3) = section_yz
	2708
	2709	!
	2710	!-- Upper plot limit (grid point value) for 1D profiles
	2711	IF ( z_max_do1d == -1.0 ) THEN
[667]	2712
[1]	2713	nz_do1d = nzt+1
[667]	2714
[1]	2715	ELSE
	2716	DO k = nzb+1, nzt+1
	2717	nz_do1d = k
	2718	IF ( zw(k) > z_max_do1d ) EXIT
	2719	ENDDO
	2720	ENDIF
	2721
	2722	!
	2723	!-- Upper plot limit for 2D vertical sections
	2724	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2725	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2726	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2727	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2728	' (zu(nzt))'
[226]	2729	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2730	ENDIF
	2731
	2732	!
	2733	!-- Upper plot limit for 3D arrays
	2734	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2735
	2736	!
	2737	!-- Determine and check accuracy for compressed 3D plot output
	2738	IF ( do3d_compress ) THEN
	2739	!
	2740	!-- Compression only permissible on T3E machines
	2741	IF ( host(1:3) /= 't3e' ) THEN
[215]	2742	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2743	TRIM( host ) // '"'
[226]	2744	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2745	ENDIF
	2746
	2747	i = 1
	2748	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2749
	2750	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2751	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2752	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2753	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2754	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2755	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2756	ENDIF
	2757
	2758	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2759	var = do3d_comp_prec(i)(1:ilen-1)
	2760
	2761	SELECT CASE ( var )
	2762
	2763	CASE ( 'u' )
	2764	j = 1
	2765	CASE ( 'v' )
	2766	j = 2
	2767	CASE ( 'w' )
	2768	j = 3
	2769	CASE ( 'p' )
	2770	j = 4
	2771	CASE ( 'pt' )
	2772	j = 5
	2773
	2774	CASE DEFAULT
[215]	2775	WRITE( message_string, * ) 'unknown variable "', &
	2776	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2777	i, ')'
[226]	2778	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2779
	2780	END SELECT
	2781
	2782	plot_3d_precision(j)%precision = prec
	2783	i = i + 1
	2784
	2785	ENDDO
	2786	ENDIF
	2787
	2788	!
	2789	!-- Check the data output format(s)
	2790	IF ( data_output_format(1) == ' ' ) THEN
	2791	!
	2792	!-- Default value
	2793	netcdf_output = .TRUE.
	2794	ELSE
	2795	i = 1
	2796	DO WHILE ( data_output_format(i) /= ' ' )
	2797
	2798	SELECT CASE ( data_output_format(i) )
	2799
	2800	CASE ( 'netcdf' )
	2801	netcdf_output = .TRUE.
	2802	CASE ( 'iso2d' )
	2803	iso2d_output = .TRUE.
	2804	CASE ( 'profil' )
	2805	profil_output = .TRUE.
	2806	CASE ( 'avs' )
	2807	avs_output = .TRUE.
	2808
	2809	CASE DEFAULT
[215]	2810	message_string = 'unknown value for data_output_format "' // &
	2811	TRIM( data_output_format(i) ) // '"'
[226]	2812	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2813
	2814	END SELECT
	2815
	2816	i = i + 1
	2817	IF ( i > 10 ) EXIT
	2818
	2819	ENDDO
	2820
	2821	ENDIF
	2822
	2823	!
[410]	2824	!-- Check mask conditions
[553]	2825	DO mid = 1, max_masks
[567]	2826	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	2827	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	2828	masks = masks + 1
	2829	ENDIF
	2830	ENDDO
	2831
[410]	2832	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2833	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2834	'<= ', max_masks, ' (=max_masks)'
[564]	2835	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	2836	ENDIF
	2837	IF ( masks > 0 ) THEN
	2838	mask_scale(1) = mask_scale_x
	2839	mask_scale(2) = mask_scale_y
	2840	mask_scale(3) = mask_scale_z
	2841	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2842	WRITE( message_string, * ) &
	2843	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2844	'must be > 0.0'
[564]	2845	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	2846	ENDIF
	2847	!
	2848	!-- Generate masks for masked data output
	2849	CALL init_masks
	2850	ENDIF
	2851
	2852	!
[493]	2853	!-- Check the NetCDF data format
	2854	IF ( netcdf_data_format > 2 ) THEN
	2855	#if defined( __netcdf4 )
	2856	CONTINUE
	2857	#else
	2858	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
	2859	'cpp-directive __netcdf4 given & switch ' // &
	2860	'back to 64-bit offset format'
	2861	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	2862	netcdf_data_format = 2
	2863	#endif
	2864	ENDIF
	2865
	2866	!
[667]	2867
[1]	2868	!-- Check netcdf precison
	2869	ldum = .FALSE.
	2870	CALL define_netcdf_header( 'ch', ldum, 0 )
	2871
	2872	!
	2873	!-- Check, whether a constant diffusion coefficient shall be used
	2874	IF ( km_constant /= -1.0 ) THEN
	2875	IF ( km_constant < 0.0 ) THEN
[215]	2876	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2877	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2878	ELSE
	2879	IF ( prandtl_number < 0.0 ) THEN
[215]	2880	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2881	' < 0.0'
[226]	2882	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2883	ENDIF
	2884	constant_diffusion = .TRUE.
	2885
	2886	IF ( prandtl_layer ) THEN
[215]	2887	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2888	'value of km'
[226]	2889	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2890	ENDIF
	2891	ENDIF
	2892	ENDIF
	2893
	2894	!
	2895	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2896	!-- for the horizontal diffusivity used within the outflow damping layer,
	2897	!-- and check/set the width of the damping layer
	2898	IF ( bc_lr /= 'cyclic' ) THEN
	2899	IF ( km_damp_max == -1.0 ) THEN
	2900	km_damp_max = 0.5 * dx
	2901	ENDIF
	2902	IF ( outflow_damping_width == -1.0 ) THEN
	2903	outflow_damping_width = MIN( 20, nx/2 )
	2904	ENDIF
	2905	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2906	message_string = 'outflow_damping width out of range'
[226]	2907	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2908	ENDIF
	2909	ENDIF
	2910
	2911	IF ( bc_ns /= 'cyclic' ) THEN
	2912	IF ( km_damp_max == -1.0 ) THEN
	2913	km_damp_max = 0.5 * dy
	2914	ENDIF
	2915	IF ( outflow_damping_width == -1.0 ) THEN
	2916	outflow_damping_width = MIN( 20, ny/2 )
	2917	ENDIF
	2918	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2919	message_string = 'outflow_damping width out of range'
[226]	2920	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2921	ENDIF
	2922	ENDIF
	2923
	2924	!
	2925	!-- Check value range for rif
	2926	IF ( rif_min >= rif_max ) THEN
[215]	2927	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2928	'than rif_max = ', rif_max
[226]	2929	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2930	ENDIF
	2931
	2932	!
	2933	!-- Determine upper and lower hight level indices for random perturbations
[97]	2934	IF ( disturbance_level_b == -9999999.9 ) THEN
	2935	IF ( ocean ) THEN
	2936	disturbance_level_b = zu((nzt*2)/3)
	2937	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2938	ELSE
	2939	disturbance_level_b = zu(nzb+3)
	2940	disturbance_level_ind_b = nzb + 3
	2941	ENDIF
[1]	2942	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2943	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2944	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2945	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2946	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2947	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2948	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2949	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2950	ELSE
	2951	DO k = 3, nzt-2
	2952	IF ( disturbance_level_b <= zu(k) ) THEN
	2953	disturbance_level_ind_b = k
	2954	EXIT
	2955	ENDIF
	2956	ENDDO
	2957	ENDIF
	2958
[97]	2959	IF ( disturbance_level_t == -9999999.9 ) THEN
	2960	IF ( ocean ) THEN
	2961	disturbance_level_t = zu(nzt-3)
	2962	disturbance_level_ind_t = nzt - 3
	2963	ELSE
	2964	disturbance_level_t = zu(nzt/3)
	2965	disturbance_level_ind_t = nzt / 3
	2966	ENDIF
[1]	2967	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2968	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2969	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2970	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2971	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2972	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2973	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2974	disturbance_level_b
[226]	2975	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2976	ELSE
	2977	DO k = 3, nzt-2
	2978	IF ( disturbance_level_t <= zu(k) ) THEN
	2979	disturbance_level_ind_t = k
	2980	EXIT
	2981	ENDIF
	2982	ENDDO
	2983	ENDIF
	2984
	2985	!
	2986	!-- Check again whether the levels determined this way are ok.
	2987	!-- Error may occur at automatic determination and too few grid points in
	2988	!-- z-direction.
	2989	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2990	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2991	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2992	disturbance_level_b
[226]	2993	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2994	ENDIF
	2995
	2996	!
	2997	!-- Determine the horizontal index range for random perturbations.
	2998	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2999	!-- near the inflow and the perturbation area is further limited to ...(1)
	3000	!-- after the initial phase of the flow.
	3001	dist_nxl = 0; dist_nxr = nx
	3002	dist_nys = 0; dist_nyn = ny
	3003	IF ( bc_lr /= 'cyclic' ) THEN
	3004	IF ( inflow_disturbance_begin == -1 ) THEN
	3005	inflow_disturbance_begin = MIN( 10, nx/2 )
	3006	ENDIF
	3007	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3008	THEN
[215]	3009	message_string = 'inflow_disturbance_begin out of range'
[226]	3010	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3011	ENDIF
	3012	IF ( inflow_disturbance_end == -1 ) THEN
	3013	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3014	ENDIF
	3015	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3016	THEN
[215]	3017	message_string = 'inflow_disturbance_end out of range'
[226]	3018	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3019	ENDIF
	3020	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3021	IF ( inflow_disturbance_begin == -1 ) THEN
	3022	inflow_disturbance_begin = MIN( 10, ny/2 )
	3023	ENDIF
	3024	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3025	THEN
[215]	3026	message_string = 'inflow_disturbance_begin out of range'
[226]	3027	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3028	ENDIF
	3029	IF ( inflow_disturbance_end == -1 ) THEN
	3030	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3031	ENDIF
	3032	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3033	THEN
[215]	3034	message_string = 'inflow_disturbance_end out of range'
[226]	3035	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3036	ENDIF
	3037	ENDIF
	3038
[73]	3039	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	3040	dist_nxr = nx - inflow_disturbance_begin
	3041	dist_nxl(1) = nx - inflow_disturbance_end
[73]	3042	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	3043	dist_nxl = inflow_disturbance_begin
	3044	dist_nxr(1) = inflow_disturbance_end
[73]	3045	ENDIF
	3046	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	3047	dist_nyn = ny - inflow_disturbance_begin
	3048	dist_nys(1) = ny - inflow_disturbance_end
[73]	3049	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	3050	dist_nys = inflow_disturbance_begin
	3051	dist_nyn(1) = inflow_disturbance_end
	3052	ENDIF
	3053
	3054	!
[151]	3055	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3056	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	3057	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	3058	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3059	'condition at the inflow boundary'
[226]	3060	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3061	ENDIF
	3062
	3063	!
	3064	!-- In case of turbulent inflow calculate the index of the recycling plane
	3065	IF ( turbulent_inflow ) THEN
	3066	IF ( recycling_width == 9999999.9 ) THEN
	3067	!
	3068	!-- Set the default value for the width of the recycling domain
	3069	recycling_width = 0.1 * nx * dx
	3070	ELSE
	3071	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3072	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3073	' ', recycling_width
[226]	3074	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3075	ENDIF
	3076	ENDIF
	3077	!
	3078	!-- Calculate the index
	3079	recycling_plane = recycling_width / dx
	3080	ENDIF
	3081
	3082	!
[1]	3083	!-- Check random generator
	3084	IF ( random_generator /= 'system-specific' .AND. &
	3085	random_generator /= 'numerical-recipes' ) THEN
[215]	3086	message_string = 'unknown random generator: random_generator = "' // &
	3087	TRIM( random_generator ) // '"'
[226]	3088	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3089	ENDIF
	3090
	3091	!
	3092	!-- Determine damping level index for 1D model
	3093	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3094	IF ( damp_level_1d == -1.0 ) THEN
	3095	damp_level_1d = zu(nzt+1)
	3096	damp_level_ind_1d = nzt + 1
	3097	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3098	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3099	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3100	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3101	ELSE
	3102	DO k = 1, nzt+1
	3103	IF ( damp_level_1d <= zu(k) ) THEN
	3104	damp_level_ind_1d = k
	3105	EXIT
	3106	ENDIF
	3107	ENDDO
	3108	ENDIF
	3109	ENDIF
[215]	3110
[1]	3111	!
	3112	!-- Check some other 1d-model parameters
	3113	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3114	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3115	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3116	'" is unknown'
[226]	3117	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3118	ENDIF
	3119	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3120	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3121	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3122	'" is unknown'
[226]	3123	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3124	ENDIF
	3125
	3126	!
	3127	!-- Set time for the next user defined restart (time_restart is the
	3128	!-- internal parameter for steering restart events)
	3129	IF ( restart_time /= 9999999.9 ) THEN
[291]	3130	IF ( restart_time > time_since_reference_point ) THEN
	3131	time_restart = restart_time
	3132	ENDIF
[1]	3133	ELSE
	3134	!
	3135	!-- In case of a restart run, set internal parameter to default (no restart)
	3136	!-- if the NAMELIST-parameter restart_time is omitted
	3137	time_restart = 9999999.9
	3138	ENDIF
	3139
	3140	!
	3141	!-- Set default value of the time needed to terminate a model run
	3142	IF ( termination_time_needed == -1.0 ) THEN
	3143	IF ( host(1:3) == 'ibm' ) THEN
	3144	termination_time_needed = 300.0
	3145	ELSE
	3146	termination_time_needed = 35.0
	3147	ENDIF
	3148	ENDIF
	3149
	3150	!
	3151	!-- Check the time needed to terminate a model run
	3152	IF ( host(1:3) == 't3e' ) THEN
	3153	!
	3154	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3155	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3156	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3157	WRITE( message_string, * ) 'termination_time_needed = ', &
	3158	termination_time_needed, ' must be > 30.0 on host "', &
	3159	TRIM( host ), '"'
[226]	3160	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3161	ENDIF
	3162	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3163	!
	3164	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3165	!-- because the job time consumed before executing palm (for compiling,
	3166	!-- copying of files, etc.) has to be regarded
	3167	IF ( termination_time_needed < 300.0 ) THEN
[215]	3168	WRITE( message_string, * ) 'termination_time_needed = ', &
	3169	termination_time_needed, ' should be >= 300.0 on host "', &
	3170	TRIM( host ), '"'
[226]	3171	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3172	ENDIF
	3173	ENDIF
	3174
[217]	3175	!
[240]	3176	!-- Check pressure gradient conditions
	3177	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3178	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3179	'w are .TRUE. but one of them must be .FALSE.'
[240]	3180	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3181	ENDIF
	3182	IF ( dp_external ) THEN
	3183	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3184	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3185	' of range'
	3186	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3187	ENDIF
	3188	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3189	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3190	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3191	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3192	ENDIF
	3193	ENDIF
	3194	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3195	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3196	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3197	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3198	ENDIF
[241]	3199	IF ( conserve_volume_flow ) THEN
	3200	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3201
	3202	conserve_volume_flow_mode = 'initial_profiles'
	3203
[241]	3204	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3205	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3206	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3207	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3208	conserve_volume_flow_mode
	3209	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3210	ENDIF
[667]	3211	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3212	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3213	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3214	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3215	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3216	ENDIF
	3217	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3218	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3219	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3220	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3221	' or ''bulk_velocity'''
	3222	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3223	ENDIF
	3224	ENDIF
	3225	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3226	( .NOT. conserve_volume_flow .OR. &
	3227	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3228	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3229	'conserve_volume_flow = .T. and ', &
[241]	3230	'conserve_volume_flow_mode = ''bulk_velocity'''
	3231	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3232	ENDIF
[240]	3233
	3234	!
[264]	3235	!-- Check particle attributes
	3236	IF ( particle_color /= 'none' ) THEN
	3237	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3238	particle_color /= 'z' ) THEN
	3239	message_string = 'illegal value for parameter particle_color: ' // &
	3240	TRIM( particle_color)
	3241	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3242	ELSE
	3243	IF ( color_interval(2) <= color_interval(1) ) THEN
	3244	message_string = 'color_interval(2) <= color_interval(1)'
	3245	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3246	ENDIF
	3247	ENDIF
	3248	ENDIF
	3249
	3250	IF ( particle_dvrpsize /= 'none' ) THEN
	3251	IF ( particle_dvrpsize /= 'absw' ) THEN
	3252	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3253	' ' // TRIM( particle_color)
	3254	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3255	ELSE
	3256	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3257	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3258	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3259	ENDIF
	3260	ENDIF
	3261	ENDIF
	3262
	3263	!
[217]	3264	!-- Check &userpar parameters
	3265	CALL user_check_parameters
[1]	3266
[217]	3267
[667]	3268
[1]	3269	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |