Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 592

Last change on this file since 592 was 581, checked in by heinze, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 122.5 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[581]	6	!
[392]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: check_parameters.f90 581 2010-10-05 14:22:12Z helmke $
[554]	11	!
[581]	12	! 580 2010-10-05 13:59:11Z heinze
	13	! Renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
	14	!
[568]	15	! 567 2010-10-01 10:46:30Z helmke
	16	! calculating masks changed
	17	!
[565]	18	! 564 2010-09-30 13:18:59Z helmke
	19	! palm message identifiers of masked output changed, 20 replaced by max_masks
	20	!
[554]	21	! 553 2010-09-01 14:09:06Z weinreis
	22	! masks is calculated and removed from inipar
[532]	23	!
	24	! 531 2010-04-21 06:47:21Z heinze
	25	! Bugfix: unit of hyp changed to dbar
[392]	26	!
[525]	27	! 524 2010-03-30 02:04:51Z raasch
	28	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	29	!
[494]	30	! 493 2010-03-01 08:30:24Z raasch
	31	! netcdf_data_format is checked
	32	!
[449]	33	! 411 2009-12-11 14:15:58Z heinze
	34	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	35	! Initialization of large scale vertical motion (subsidence/ascent)
	36	!
	37	! 410 2009-12-04 17:05:40Z letzel
	38	! masked data output
	39	!
[392]	40	! 388 2009-09-23 09:40:33Z raasch
[388]	41	! Check profiles fpr prho and hyp.
[376]	42	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	43	! interval has been set, respective error message is included
[366]	44	! bc_lr_cyc and bc_ns_cyc are set,
[328]	45	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	46	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	47	! Coupling with independent precursor runs.
[264]	48	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	49	! Bugfix: pressure included for profile output
[240]	50	! Check pressure gradient conditions
[256]	51	! topography_grid_convention moved from user_check_parameters
	52	! 'single_street_canyon'
[367]	53	! Added shf* and qsws* to the list of available output data
[226]	54	!
	55	! 222 2009-01-12 16:04:16Z letzel
[217]	56	! +user_check_parameters
[213]	57	! Output of messages replaced by message handling routine.
[206]	58	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	59	! deleted __mpi2 directives
[222]	60	! Check that PALM is called with mrun -K parallel for coupling
[198]	61	!
	62	! 197 2008-09-16 15:29:03Z raasch
[177]	63	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	64	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	65	!
	66	! Strict grid matching along z is not needed for mg-solver.
[153]	67	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	68	! Case of reading data for recycling included in initializing_actions,
[197]	69	! check of turbulent_inflow and calculation of recycling_plane.
	70	! q*2 profile added
[139]	71	!
	72	! 138 2007-11-28 10:03:58Z letzel
[138]	73	! Plant canopy added
[132]	74	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	75	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	76	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	77	!
	78	! 109 2007-08-28 15:26:47Z letzel
[102]	79	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	80	! conditions for temperature and fluxes) in case of coupled runs.
	81	! +profiles for wp and w"e
[104]	82	! Bugfix: Error message concerning output of particle concentration (pc)
	83	! modified
[108]	84	! More checks and more default values for coupled runs
	85	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	86	! cloud_physics = .T.)
	87	! Rayleigh damping for ocean fixed.
[109]	88	! Check and, if necessary, set default value for dt_coupling
[98]	89	!
	90	! 97 2007-06-21 08:23:15Z raasch
[97]	91	! Initial salinity profile is calculated, salinity boundary conditions are
	92	! checked,
[94]	93	! z_max_do1d is checked only in case of ocean = .f.,
[97]	94	! +initial temperature and geostrophic velocity profiles for the ocean version,
	95	! use_pt_reference renamed use_reference
[77]	96	!
[90]	97	! 89 2007-05-25 12:08:31Z raasch
	98	! Check for user-defined profiles
	99	!
[77]	100	! 75 2007-03-22 09:54:05Z raasch
[51]	101	! "by_user" allowed as initializing action, -data_output_ts,
[63]	102	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	103	! and pt_reference are checked, moisture renamed humidity,
[72]	104	! output of precipitation amount/rate and roughnes length + check
[73]	105	! possible negative humidities are avoided in initial profile,
[75]	106	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	107	! revision added to run_description_header
[1]	108	!
[39]	109	! 20 2007-02-26 00:12:32Z raasch
	110	! Temperature and humidity gradients at top are now calculated for nzt+1,
	111	! top_heatflux and respective boundary condition bc_pt_t is checked
	112	!
[3]	113	! RCS Log replace by Id keyword, revision history cleaned up
	114	!
[1]	115	! Revision 1.61 2006/08/04 14:20:25 raasch
	116	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	117	! use_upstream_for_tke, default value for dt_dopts,
	118	! generation of file header moved from routines palm and header to here
	119	!
	120	! Revision 1.1 1997/08/26 06:29:23 raasch
	121	! Initial revision
	122	!
	123	!
	124	! Description:
	125	! ------------
	126	! Check control parameters and deduce further quantities.
	127	!------------------------------------------------------------------------------!
	128
	129	USE arrays_3d
	130	USE constants
	131	USE control_parameters
[264]	132	USE dvrp_variables
[1]	133	USE grid_variables
	134	USE indices
	135	USE model_1d
	136	USE netcdf_control
	137	USE particle_attributes
	138	USE pegrid
	139	USE profil_parameter
[411]	140	USE subsidence_mod
[1]	141	USE statistics
	142	USE transpose_indices
	143
	144	IMPLICIT NONE
	145
	146	CHARACTER (LEN=1) :: sq
	147	CHARACTER (LEN=6) :: var
	148	CHARACTER (LEN=7) :: unit
	149	CHARACTER (LEN=8) :: date
	150	CHARACTER (LEN=10) :: time
[102]	151	CHARACTER (LEN=40) :: coupling_string
[1]	152	CHARACTER (LEN=100) :: action
	153
[108]	154	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	155	position, prec
[1]	156	LOGICAL :: found, ldum
[291]	157	REAL :: gradient, maxn, maxp, remote = 0.0, &
	158	simulation_time_since_reference
[1]	159
	160	!
	161	!-- Warning, if host is not set
	162	IF ( host(1:1) == ' ' ) THEN
[213]	163	message_string = '"host" is not set. Please check that environment ' // &
	164	'variable "localhost" & is set before running PALM'
[226]	165	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	166	ENDIF
	167
	168	!
[102]	169	!-- Check the coupling mode
	170	IF ( coupling_mode /= 'uncoupled' .AND. &
	171	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	172	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	173	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	174	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	175	ENDIF
	176
	177	!
[108]	178	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	179	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	180
[108]	181	IF ( dt_coupling == 9999999.9 ) THEN
[213]	182	message_string = 'dt_coupling is not set but required for coup' // &
	183	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	184	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	185	ENDIF
[213]	186
[206]	187	#if defined( __parallel )
	188	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	189	ierr )
	190	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	191	status, ierr )
[108]	192	IF ( dt_coupling /= remote ) THEN
[213]	193	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	194	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	195	'dt_coupling_remote = ', remote
[226]	196	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	197	ENDIF
[109]	198	IF ( dt_coupling <= 0.0 ) THEN
[206]	199	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	200	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	201	status, ierr )
[109]	202	dt_coupling = MAX( dt_max, remote )
[213]	203	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	204	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	205	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	206	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	207	ENDIF
[213]	208
[206]	209	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	210	ierr )
	211	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	212	status, ierr )
[108]	213	IF ( restart_time /= remote ) THEN
[213]	214	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	215	'": restart_time = ', restart_time, '& is not equal to ', &
	216	'restart_time_remote = ', remote
[226]	217	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	218	ENDIF
[213]	219
[206]	220	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	221	ierr )
	222	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	223	status, ierr )
[108]	224	IF ( dt_restart /= remote ) THEN
[213]	225	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	226	'": dt_restart = ', dt_restart, '& is not equal to ', &
	227	'dt_restart_remote = ', remote
[226]	228	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	229	ENDIF
[213]	230
[291]	231	simulation_time_since_reference = end_time - coupling_start_time
	232	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	233	14, comm_inter, ierr )
[206]	234	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	235	status, ierr )
[291]	236	IF ( simulation_time_since_reference /= remote ) THEN
[213]	237	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	238	'": simulation_time_since_reference = ', &
	239	simulation_time_since_reference, '& is not equal to ', &
	240	'simulation_time_since_reference_remote = ', remote
[226]	241	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	242	ENDIF
[213]	243
[206]	244	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	245	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	246	status, ierr )
[108]	247	IF ( dx /= remote ) THEN
[213]	248	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	249	'": dx = ', dx, '& is not equal to dx_remote = ', remote
[226]	250	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
[108]	251	ENDIF
[213]	252
[206]	253	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	254	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	255	status, ierr )
[108]	256	IF ( dy /= remote ) THEN
[213]	257	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	258	'": dy = ', dy, '& is not equal to dy_remote = ', remote
[226]	259	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
[108]	260	ENDIF
[213]	261
[206]	262	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	263	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	264	status, ierr )
[108]	265	IF ( nx /= iremote ) THEN
[213]	266	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	267	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
[226]	268	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
[108]	269	ENDIF
[213]	270
[206]	271	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	272	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	273	status, ierr )
[108]	274	IF ( ny /= iremote ) THEN
[213]	275	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	276	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
[226]	277	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
[108]	278	ENDIF
[222]	279	#else
	280	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	281	' ''mrun -K parallel'''
[226]	282	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	283	#endif
	284	ENDIF
	285
[206]	286	#if defined( __parallel )
[108]	287	!
	288	!-- Exchange via intercommunicator
	289	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	290	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	291	ierr )
[108]	292	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	293	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	294	comm_inter, status, ierr )
[108]	295	ENDIF
	296	#endif
	297
	298
	299	!
[1]	300	!-- Generate the file header which is used as a header for most of PALM's
	301	!-- output files
	302	CALL DATE_AND_TIME( date, time )
	303	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	304	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	305	IF ( coupling_mode == 'uncoupled' ) THEN
	306	coupling_string = ''
	307	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	308	coupling_string = ' coupled (atmosphere)'
	309	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	310	coupling_string = ' coupled (ocean)'
	311	ENDIF
[1]	312
[102]	313	WRITE ( run_description_header, &
	314	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	315	TRIM( version ), TRIM( revision ), 'run: ', &
	316	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	317	'host: ', TRIM( host ), run_date, run_time
[1]	318
	319	!
[63]	320	!-- Check the general loop optimization method
	321	IF ( loop_optimization == 'default' ) THEN
	322	IF ( host(1:3) == 'nec' ) THEN
	323	loop_optimization = 'vector'
	324	ELSE
	325	loop_optimization = 'cache'
	326	ENDIF
	327	ENDIF
	328	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	329	.AND. loop_optimization /= 'vector' ) THEN
[213]	330	message_string = 'illegal value given for loop_optimization: "' // &
	331	TRIM( loop_optimization ) // '"'
[226]	332	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	333	ENDIF
	334
	335	!
[1]	336	!-- Check topography setting (check for illegal parameter combinations)
	337	IF ( topography /= 'flat' ) THEN
	338	action = ' '
	339	IF ( scalar_advec /= 'pw-scheme' ) THEN
	340	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	341	ENDIF
	342	IF ( momentum_advec /= 'pw-scheme' ) THEN
	343	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	344	ENDIF
[51]	345	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	346	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	347	ENDIF
[114]	348	IF ( psolver == 'sor' ) THEN
[1]	349	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	350	ENDIF
	351	IF ( sloping_surface ) THEN
	352	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	353	ENDIF
	354	IF ( galilei_transformation ) THEN
	355	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	356	ENDIF
	357	IF ( cloud_physics ) THEN
	358	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	359	ENDIF
	360	IF ( cloud_droplets ) THEN
	361	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	362	ENDIF
	363	IF ( .NOT. prandtl_layer ) THEN
	364	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	365	ENDIF
	366	IF ( action /= ' ' ) THEN
[213]	367	message_string = 'a non-flat topography does not allow ' // &
	368	TRIM( action )
[226]	369	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	370	ENDIF
[256]	371	!
	372	!-- In case of non-flat topography, check whether the convention how to
	373	!-- define the topography grid has been set correctly, or whether the default
	374	!-- is applicable. If this is not possible, abort.
	375	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	376	IF ( TRIM( topography ) /= 'single_building' .AND. &
	377	TRIM( topography ) /= 'single_street_canyon' .AND. &
	378	TRIM( topography ) /= 'read_from_file' ) THEN
	379	!-- The default value is not applicable here, because it is only valid
	380	!-- for the two standard cases 'single_building' and 'read_from_file'
	381	!-- defined in init_grid.
	382	WRITE( message_string, * ) &
	383	'The value for "topography_grid_convention" ', &
	384	'is not set. Its default value is & only valid for ', &
	385	'"topography" = ''single_building'', ', &
	386	'''single_street_canyon'' & or ''read_from_file''.', &
	387	' & Choose ''cell_edge'' or ''cell_center''.'
	388	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	389	ELSE
	390	!-- The default value is applicable here.
	391	!-- Set convention according to topography.
	392	IF ( TRIM( topography ) == 'single_building' .OR. &
	393	TRIM( topography ) == 'single_street_canyon' ) THEN
	394	topography_grid_convention = 'cell_edge'
	395	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	396	topography_grid_convention = 'cell_center'
	397	ENDIF
	398	ENDIF
	399	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	400	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	401	WRITE( message_string, * ) &
	402	'The value for "topography_grid_convention" is ', &
	403	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	404	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	405	ENDIF
	406
[1]	407	ENDIF
[94]	408
[1]	409	!
[94]	410	!-- Check ocean setting
	411	IF ( ocean ) THEN
[332]	412
[94]	413	action = ' '
	414	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	415	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	416	ENDIF
[97]	417	IF ( momentum_advec == 'ups-scheme' ) THEN
	418	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	419	ENDIF
[94]	420	IF ( action /= ' ' ) THEN
[213]	421	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	422	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	423	ENDIF
	424
[332]	425	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	426	TRIM( coupling_char ) == '_O' ) THEN
[343]	427
[94]	428	!
[332]	429	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	430	!-- ocean run (this setting is done via mrun-option -y)
[343]	431
[291]	432	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	433	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	434	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	435
[291]	436	ENDIF
	437
	438	!
[1]	439	!-- Check whether there are any illegal values
	440	!-- Pressure solver:
	441	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	442	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	443	message_string = 'unknown solver for perturbation pressure: psolver' // &
	444	' = "' // TRIM( psolver ) // '"'
[226]	445	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	446	ENDIF
	447
	448	#if defined( __parallel )
	449	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	450	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	451	'for a 1d domain-decomposition along x & please do' // &
	452	' not set npey/=1 in the parameter file'
[226]	453	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	454	ENDIF
[181]	455	IF ( psolver == 'poisfft_hybrid' .AND. &
	456	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	457	psolver == 'multigrid' .AND. &
	458	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	459	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	460	'work for subdomains with unequal size & please ' // &
	461	'set grid_matching = ''strict'' in the parameter file'
[226]	462	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	463	ENDIF
	464	#else
	465	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	466	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	467	' for a parallel environment'
[226]	468	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	469	ENDIF
	470	#endif
	471
	472	IF ( psolver == 'multigrid' ) THEN
	473	IF ( cycle_mg == 'w' ) THEN
	474	gamma_mg = 2
	475	ELSEIF ( cycle_mg == 'v' ) THEN
	476	gamma_mg = 1
	477	ELSE
[213]	478	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	479	TRIM( cycle_mg ) // '"'
[226]	480	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	481	ENDIF
	482	ENDIF
	483
	484	IF ( fft_method /= 'singleton-algorithm' .AND. &
	485	fft_method /= 'temperton-algorithm' .AND. &
	486	fft_method /= 'system-specific' ) THEN
[213]	487	message_string = 'unknown fft-algorithm: fft_method = "' // &
	488	TRIM( fft_method ) // '"'
[226]	489	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	490	ENDIF
	491
	492	!
	493	!-- Advection schemes:
	494	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	495	THEN
[214]	496	message_string = 'unknown advection scheme: momentum_advec = "' // &
	497	TRIM( momentum_advec ) // '"'
[226]	498	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	499	ENDIF
	500	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	501	.AND. timestep_scheme /= 'euler' ) THEN
[214]	502	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	503	'" is not allowed with timestep_scheme = "' // &
	504	TRIM( timestep_scheme ) // '"'
[226]	505	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	506	ENDIF
	507
	508	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	509	scalar_advec /= 'ups-scheme' ) THEN
[214]	510	message_string = 'unknown advection scheme: scalar_advec = "' // &
	511	TRIM( scalar_advec ) // '"'
[226]	512	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	513	ENDIF
	514
	515	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	516	use_upstream_for_tke = .TRUE.
[214]	517	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	518	'use_sgs_for_particles = .TRUE.'
[226]	519	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	520	ENDIF
	521
	522	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	523	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	524	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	525	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	526	ENDIF
	527
	528	!
	529	!-- Timestep schemes:
	530	SELECT CASE ( TRIM( timestep_scheme ) )
	531
	532	CASE ( 'euler' )
	533	intermediate_timestep_count_max = 1
	534	asselin_filter_factor = 0.0
	535
	536	CASE ( 'leapfrog', 'leapfrog+euler' )
	537	intermediate_timestep_count_max = 1
	538
	539	CASE ( 'runge-kutta-2' )
	540	intermediate_timestep_count_max = 2
	541	asselin_filter_factor = 0.0
	542
	543	CASE ( 'runge-kutta-3' )
	544	intermediate_timestep_count_max = 3
	545	asselin_filter_factor = 0.0
	546
	547	CASE DEFAULT
[214]	548	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	549	TRIM( timestep_scheme ) // '"'
[226]	550	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	551
	552	END SELECT
	553
[63]	554	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	555	THEN
[214]	556	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	557	'" & does not work with timestep_scheme "' // &
	558	TRIM( timestep_scheme ) // '"'
[226]	559	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	560	ENDIF
	561
	562	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	563	THEN
[214]	564	message_string = 'momentum advection scheme "' // &
	565	TRIM( momentum_advec ) // '" & does not work with ' // &
	566	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	567	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	568	ENDIF
	569
[147]	570	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	571	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	572	!
[214]	573	!-- No restart run: several initialising actions are possible
[1]	574	action = initializing_actions
	575	DO WHILE ( TRIM( action ) /= '' )
	576	position = INDEX( action, ' ' )
	577	SELECT CASE ( action(1:position-1) )
	578
	579	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	580	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	581	action = action(position+1:)
	582
	583	CASE DEFAULT
[214]	584	message_string = 'initializing_action = "' // &
	585	TRIM( action ) // '" unkown or not allowed'
[226]	586	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	587
	588	END SELECT
	589	ENDDO
	590	ENDIF
[214]	591
[1]	592	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	593	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	594	message_string = 'initializing_actions = "set_constant_profiles"' // &
	595	' and "set_1d-model_profiles" are not allowed ' // &
	596	'simultaneously'
[226]	597	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	598	ENDIF
[214]	599
[46]	600	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	601	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	602	message_string = 'initializing_actions = "set_constant_profiles"' // &
	603	' and "by_user" are not allowed simultaneously'
[226]	604	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	605	ENDIF
[214]	606
[46]	607	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	608	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	609	message_string = 'initializing_actions = "by_user" and ' // &
	610	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	611	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	612	ENDIF
[1]	613
[75]	614	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	615	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	616	'not allowed with humidity = ', humidity
[226]	617	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	618	ENDIF
	619
[72]	620	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	621	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	622	'not allowed with cloud_physics = ', cloud_physics
[226]	623	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	624	ENDIF
	625
[75]	626	IF ( humidity .AND. sloping_surface ) THEN
[214]	627	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	628	'are not allowed simultaneously'
[226]	629	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	630	ENDIF
	631
[75]	632	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	633	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	634	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	635	ENDIF
	636
[75]	637	IF ( passive_scalar .AND. humidity ) THEN
[214]	638	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	639	'is not allowed simultaneously'
[226]	640	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	641	ENDIF
	642
	643	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	644	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	645	' = .TRUE.'
[226]	646	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	647	ENDIF
	648
	649	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	650	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	651	'" found for parameter grid_matching'
[226]	652	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	653	ENDIF
	654
[138]	655	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	656	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	657	'coefficient & given value is drag_coefficient = 0.0'
[226]	658	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	659	ENDIF
	660
[1]	661	!
	662	!-- In case of no model continuation run, check initialising parameters and
	663	!-- deduce further quantities
	664	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	665
	666	!
	667	!-- Initial profiles for 1D and 3D model, respectively
	668	u_init = ug_surface
	669	v_init = vg_surface
	670	pt_init = pt_surface
[94]	671	IF ( humidity ) q_init = q_surface
	672	IF ( ocean ) sa_init = sa_surface
	673	IF ( passive_scalar ) q_init = s_surface
[138]	674	IF ( plant_canopy ) lad = 0.0
[1]	675
	676	!
	677	!--
	678	!-- If required, compute initial profile of the geostrophic wind
	679	!-- (component ug)
	680	i = 1
	681	gradient = 0.0
[97]	682
	683	IF ( .NOT. ocean ) THEN
	684
	685	ug_vertical_gradient_level_ind(1) = 0
	686	ug(0) = ug_surface
	687	DO k = 1, nzt+1
[177]	688	IF ( i < 11 ) THEN
	689	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	690	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	691	gradient = ug_vertical_gradient(i) / 100.0
	692	ug_vertical_gradient_level_ind(i) = k - 1
	693	i = i + 1
[1]	694	ENDIF
[177]	695	ENDIF
[97]	696	IF ( gradient /= 0.0 ) THEN
	697	IF ( k /= 1 ) THEN
	698	ug(k) = ug(k-1) + dzu(k) * gradient
	699	ELSE
	700	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	701	ENDIF
[1]	702	ELSE
[97]	703	ug(k) = ug(k-1)
[1]	704	ENDIF
[97]	705	ENDDO
[1]	706
[97]	707	ELSE
	708
	709	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	710	ug(nzt+1) = ug_surface
[97]	711	DO k = nzt, 0, -1
[177]	712	IF ( i < 11 ) THEN
	713	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	714	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	715	gradient = ug_vertical_gradient(i) / 100.0
	716	ug_vertical_gradient_level_ind(i) = k + 1
	717	i = i + 1
[97]	718	ENDIF
	719	ENDIF
	720	IF ( gradient /= 0.0 ) THEN
	721	IF ( k /= nzt ) THEN
	722	ug(k) = ug(k+1) - dzu(k+1) * gradient
	723	ELSE
	724	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	725	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	726	ENDIF
	727	ELSE
	728	ug(k) = ug(k+1)
	729	ENDIF
	730	ENDDO
	731
	732	ENDIF
	733
[1]	734	u_init = ug
	735
	736	!
	737	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	738	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	739	ug_vertical_gradient_level(1) = 0.0
	740	ENDIF
	741
	742	!
	743	!--
	744	!-- If required, compute initial profile of the geostrophic wind
	745	!-- (component vg)
	746	i = 1
	747	gradient = 0.0
[97]	748
	749	IF ( .NOT. ocean ) THEN
	750
	751	vg_vertical_gradient_level_ind(1) = 0
	752	vg(0) = vg_surface
	753	DO k = 1, nzt+1
[177]	754	IF ( i < 11 ) THEN
	755	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	756	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	757	gradient = vg_vertical_gradient(i) / 100.0
	758	vg_vertical_gradient_level_ind(i) = k - 1
	759	i = i + 1
[1]	760	ENDIF
	761	ENDIF
[97]	762	IF ( gradient /= 0.0 ) THEN
	763	IF ( k /= 1 ) THEN
	764	vg(k) = vg(k-1) + dzu(k) * gradient
	765	ELSE
	766	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	767	ENDIF
[1]	768	ELSE
[97]	769	vg(k) = vg(k-1)
[1]	770	ENDIF
[97]	771	ENDDO
[1]	772
[97]	773	ELSE
	774
[121]	775	vg_vertical_gradient_level_ind(1) = nzt+1
	776	vg(nzt+1) = vg_surface
[97]	777	DO k = nzt, 0, -1
[177]	778	IF ( i < 11 ) THEN
	779	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	780	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	781	gradient = vg_vertical_gradient(i) / 100.0
	782	vg_vertical_gradient_level_ind(i) = k + 1
	783	i = i + 1
[97]	784	ENDIF
	785	ENDIF
	786	IF ( gradient /= 0.0 ) THEN
	787	IF ( k /= nzt ) THEN
	788	vg(k) = vg(k+1) - dzu(k+1) * gradient
	789	ELSE
	790	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	791	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	792	ENDIF
	793	ELSE
	794	vg(k) = vg(k+1)
	795	ENDIF
	796	ENDDO
	797
	798	ENDIF
	799
[1]	800	v_init = vg
	801
	802	!
	803	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	804	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	805	vg_vertical_gradient_level(1) = 0.0
	806	ENDIF
	807
	808	!
[94]	809	!-- Compute initial temperature profile using the given temperature gradients
[1]	810	i = 1
	811	gradient = 0.0
[94]	812
	813	IF ( .NOT. ocean ) THEN
	814
	815	pt_vertical_gradient_level_ind(1) = 0
	816	DO k = 1, nzt+1
[177]	817	IF ( i < 11 ) THEN
	818	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	819	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	820	gradient = pt_vertical_gradient(i) / 100.0
	821	pt_vertical_gradient_level_ind(i) = k - 1
	822	i = i + 1
[1]	823	ENDIF
	824	ENDIF
[94]	825	IF ( gradient /= 0.0 ) THEN
	826	IF ( k /= 1 ) THEN
	827	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	828	ELSE
	829	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	830	ENDIF
[1]	831	ELSE
[94]	832	pt_init(k) = pt_init(k-1)
[1]	833	ENDIF
[94]	834	ENDDO
[1]	835
[94]	836	ELSE
	837
	838	pt_vertical_gradient_level_ind(1) = nzt+1
	839	DO k = nzt, 0, -1
[177]	840	IF ( i < 11 ) THEN
	841	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	842	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	843	gradient = pt_vertical_gradient(i) / 100.0
	844	pt_vertical_gradient_level_ind(i) = k + 1
	845	i = i + 1
[94]	846	ENDIF
	847	ENDIF
	848	IF ( gradient /= 0.0 ) THEN
	849	IF ( k /= nzt ) THEN
	850	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	851	ELSE
	852	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	853	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	854	ENDIF
	855	ELSE
	856	pt_init(k) = pt_init(k+1)
	857	ENDIF
	858	ENDDO
	859
	860	ENDIF
	861
[1]	862	!
	863	!-- In case of no given temperature gradients, choose gradient of neutral
	864	!-- stratification
[94]	865	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	866	pt_vertical_gradient_level(1) = 0.0
	867	ENDIF
	868
	869	!
[94]	870	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	871	!-- boundary condition
[19]	872	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	873
	874	!
	875	!-- If required, compute initial humidity or scalar profile using the given
	876	!-- humidity/scalar gradient. In case of scalar transport, initially store
	877	!-- values of the scalar parameters on humidity parameters
	878	IF ( passive_scalar ) THEN
	879	bc_q_b = bc_s_b
	880	bc_q_t = bc_s_t
	881	q_surface = s_surface
	882	q_surface_initial_change = s_surface_initial_change
	883	q_vertical_gradient = s_vertical_gradient
	884	q_vertical_gradient_level = s_vertical_gradient_level
	885	surface_waterflux = surface_scalarflux
[407]	886	wall_humidityflux = wall_scalarflux
[1]	887	ENDIF
	888
[75]	889	IF ( humidity .OR. passive_scalar ) THEN
[1]	890
	891	i = 1
	892	gradient = 0.0
	893	q_vertical_gradient_level_ind(1) = 0
	894	DO k = 1, nzt+1
[177]	895	IF ( i < 11 ) THEN
	896	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	897	q_vertical_gradient_level(i) >= 0.0 ) THEN
	898	gradient = q_vertical_gradient(i) / 100.0
	899	q_vertical_gradient_level_ind(i) = k - 1
	900	i = i + 1
[1]	901	ENDIF
	902	ENDIF
	903	IF ( gradient /= 0.0 ) THEN
	904	IF ( k /= 1 ) THEN
	905	q_init(k) = q_init(k-1) + dzu(k) * gradient
	906	ELSE
	907	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	908	ENDIF
	909	ELSE
	910	q_init(k) = q_init(k-1)
	911	ENDIF
[72]	912	!
	913	!-- Avoid negative humidities
	914	IF ( q_init(k) < 0.0 ) THEN
	915	q_init(k) = 0.0
	916	ENDIF
[1]	917	ENDDO
	918
	919	!
	920	!-- In case of no given humidity gradients, choose zero gradient
	921	!-- conditions
	922	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	923	q_vertical_gradient_level(1) = 0.0
	924	ENDIF
	925
	926	!
	927	!-- Store humidity gradient at the top boundary for possile Neumann
	928	!-- boundary condition
[19]	929	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	930
	931	ENDIF
	932
[94]	933	!
	934	!-- If required, compute initial salinity profile using the given salinity
	935	!-- gradients
	936	IF ( ocean ) THEN
	937
	938	i = 1
	939	gradient = 0.0
	940
	941	sa_vertical_gradient_level_ind(1) = nzt+1
	942	DO k = nzt, 0, -1
[177]	943	IF ( i < 11 ) THEN
	944	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	945	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	946	gradient = sa_vertical_gradient(i) / 100.0
	947	sa_vertical_gradient_level_ind(i) = k + 1
	948	i = i + 1
[94]	949	ENDIF
	950	ENDIF
	951	IF ( gradient /= 0.0 ) THEN
	952	IF ( k /= nzt ) THEN
	953	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	954	ELSE
	955	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	956	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	957	ENDIF
	958	ELSE
	959	sa_init(k) = sa_init(k+1)
	960	ENDIF
	961	ENDDO
	962
	963	ENDIF
	964
[138]	965	!
[388]	966	!-- If required compute the profile of leaf area density used in the plant
	967	!-- canopy model
[138]	968	IF ( plant_canopy ) THEN
	969
	970	i = 1
	971	gradient = 0.0
[1]	972
[138]	973	IF ( .NOT. ocean ) THEN
[153]	974
	975	lad(0) = lad_surface
[138]	976
	977	lad_vertical_gradient_level_ind(1) = 0
	978	DO k = 1, pch_index
[177]	979	IF ( i < 11 ) THEN
	980	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	981	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	982	gradient = lad_vertical_gradient(i)
	983	lad_vertical_gradient_level_ind(i) = k - 1
	984	i = i + 1
[138]	985	ENDIF
	986	ENDIF
	987	IF ( gradient /= 0.0 ) THEN
	988	IF ( k /= 1 ) THEN
	989	lad(k) = lad(k-1) + dzu(k) * gradient
	990	ELSE
	991	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	992	ENDIF
	993	ELSE
	994	lad(k) = lad(k-1)
	995	ENDIF
	996	ENDDO
	997
	998	ENDIF
	999
[1]	1000	!
[388]	1001	!-- In case of no given leaf area density gradients, choose a vanishing
	1002	!-- gradient
[138]	1003	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1004	lad_vertical_gradient_level(1) = 0.0
	1005	ENDIF
	1006
	1007	ENDIF
	1008
	1009	ENDIF
[411]	1010
	1011	!
	1012	!-- Initialize large scale subsidence if required
[580]	1013	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1014	large_scale_subsidence = .TRUE.
	1015	CALL init_w_subsidence
	1016	END IF
	1017
[138]	1018
	1019	!
[1]	1020	!-- Compute Coriolis parameter
	1021	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1022	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1023
	1024	!
[97]	1025	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1026	!-- set the reference temperature equal to the surface temperature.
	1027	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1028
	1029	!
[97]	1030	!-- Reference value has to be used in buoyancy terms
	1031	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1032
	1033	!
	1034	!-- Sign of buoyancy/stability terms
	1035	IF ( ocean ) atmos_ocean_sign = -1.0
	1036
	1037	!
[108]	1038	!-- Ocean version must use flux boundary conditions at the top
	1039	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1040	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1041	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1042	ENDIF
[97]	1043
	1044	!
[1]	1045	!-- In case of a given slope, compute the relevant quantities
	1046	IF ( alpha_surface /= 0.0 ) THEN
	1047	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1048	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1049	' ) must be < 90.0'
[226]	1050	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1051	ENDIF
	1052	sloping_surface = .TRUE.
	1053	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1054	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1055	ENDIF
	1056
	1057	!
	1058	!-- Check time step and cfl_factor
	1059	IF ( dt /= -1.0 ) THEN
	1060	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1061	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1062	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1063	ENDIF
	1064	dt_3d = dt
	1065	dt_fixed = .TRUE.
	1066	ENDIF
	1067
	1068	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1069	IF ( cfl_factor == -1.0 ) THEN
	1070	IF ( momentum_advec == 'ups-scheme' .OR. &
	1071	scalar_advec == 'ups-scheme' ) THEN
	1072	cfl_factor = 0.8
	1073	ELSE
	1074	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1075	cfl_factor = 0.8
	1076	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1077	cfl_factor = 0.9
	1078	ELSE
	1079	cfl_factor = 0.1
	1080	ENDIF
	1081	ENDIF
	1082	ELSE
[215]	1083	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1084	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1085	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1086	ENDIF
	1087	ENDIF
	1088
	1089	!
	1090	!-- Store simulated time at begin
	1091	simulated_time_at_begin = simulated_time
	1092
	1093	!
[291]	1094	!-- Store reference time for coupled runs and change the coupling flag,
	1095	!-- if ...
	1096	IF ( simulated_time == 0.0 ) THEN
	1097	IF ( coupling_start_time == 0.0 ) THEN
	1098	time_since_reference_point = 0.0
	1099	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1100	run_coupled = .FALSE.
	1101	ENDIF
	1102	ENDIF
	1103
	1104	!
[1]	1105	!-- Set wind speed in the Galilei-transformed system
	1106	IF ( galilei_transformation ) THEN
	1107	IF ( use_ug_for_galilei_tr .AND. &
	1108	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1109	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1110	u_gtrans = ug_surface
	1111	v_gtrans = vg_surface
	1112	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1113	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1114	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1115	' with galilei transformation'
[226]	1116	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1117	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1118	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1119	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1120	' with galilei transformation'
[226]	1121	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1122	ELSE
[215]	1123	message_string = 'variable translation speed used for galilei-' // &
	1124	'transformation, which may cause & instabilities in stably ' // &
	1125	'stratified regions'
[226]	1126	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1127	ENDIF
	1128	ENDIF
	1129
	1130	!
	1131	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1132	!-- fluxes have to be used in the diffusion-terms
	1133	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1134
	1135	!
	1136	!-- Check boundary conditions and set internal variables:
	1137	!-- Lateral boundary conditions
[73]	1138	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1139	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1140	message_string = 'unknown boundary condition: bc_lr = "' // &
	1141	TRIM( bc_lr ) // '"'
[226]	1142	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1143	ENDIF
[73]	1144	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1145	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1146	message_string = 'unknown boundary condition: bc_ns = "' // &
	1147	TRIM( bc_ns ) // '"'
[226]	1148	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1149	ENDIF
	1150
	1151	!
[366]	1152	!-- Internal variables used for speed optimization in if clauses
	1153	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1154	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1155
	1156	!
[1]	1157	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1158	!-- Willimas advection scheme. Several schemes and tools do not work with
	1159	!-- non-cyclic boundary conditions.
	1160	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1161	IF ( psolver /= 'multigrid' ) THEN
[215]	1162	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1163	'psolver = "' // TRIM( psolver ) // '"'
[226]	1164	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1165	ENDIF
	1166	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1167	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1168	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1169	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1170	ENDIF
	1171	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1172	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1173	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1174	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1175	ENDIF
	1176	IF ( galilei_transformation ) THEN
[215]	1177	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1178	'galilei_transformation = .T.'
[226]	1179	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1180	ENDIF
	1181	ENDIF
	1182
	1183	!
	1184	!-- Bottom boundary condition for the turbulent Kinetic energy
	1185	IF ( bc_e_b == 'neumann' ) THEN
	1186	ibc_e_b = 1
	1187	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1188	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1189	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1190	ENDIF
	1191	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1192	ibc_e_b = 2
	1193	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1194	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1195	TRIM( bc_e_b ) // '"'
[226]	1196	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1197	ENDIF
	1198	IF ( .NOT. prandtl_layer ) THEN
	1199	bc_e_b = 'neumann'
	1200	ibc_e_b = 1
[215]	1201	message_string = 'boundary condition bc_e_b changed to "' // &
	1202	TRIM( bc_e_b ) // '"'
[226]	1203	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1204	ENDIF
	1205	ELSE
[215]	1206	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1207	TRIM( bc_e_b ) // '"'
[226]	1208	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1209	ENDIF
	1210
	1211	!
	1212	!-- Boundary conditions for perturbation pressure
	1213	IF ( bc_p_b == 'dirichlet' ) THEN
	1214	ibc_p_b = 0
	1215	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1216	ibc_p_b = 1
	1217	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1218	ibc_p_b = 2
	1219	ELSE
[215]	1220	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1221	TRIM( bc_p_b ) // '"'
[226]	1222	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1223	ENDIF
	1224	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1225	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1226	'" not allowed with prandtl_layer = .FALSE.'
[226]	1227	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1228	ENDIF
	1229	IF ( bc_p_t == 'dirichlet' ) THEN
	1230	ibc_p_t = 0
	1231	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1232	ibc_p_t = 1
	1233	ELSE
[215]	1234	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1235	TRIM( bc_p_t ) // '"'
[226]	1236	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1237	ENDIF
	1238
	1239	!
	1240	!-- Boundary conditions for potential temperature
[102]	1241	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1242	ibc_pt_b = 2
[1]	1243	ELSE
[102]	1244	IF ( bc_pt_b == 'dirichlet' ) THEN
	1245	ibc_pt_b = 0
	1246	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1247	ibc_pt_b = 1
	1248	ELSE
[215]	1249	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1250	TRIM( bc_pt_b ) // '"'
[226]	1251	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1252	ENDIF
	1253	ENDIF
[102]	1254
[1]	1255	IF ( bc_pt_t == 'dirichlet' ) THEN
	1256	ibc_pt_t = 0
	1257	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1258	ibc_pt_t = 1
[19]	1259	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1260	ibc_pt_t = 2
[1]	1261	ELSE
[215]	1262	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1263	TRIM( bc_pt_t ) // '"'
[226]	1264	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1265	ENDIF
	1266
[20]	1267	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1268	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1269	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1270	top_momentumflux_v /= 9999999.9 ) THEN
	1271	constant_top_momentumflux = .TRUE.
	1272	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1273	top_momentumflux_v == 9999999.9 ) ) THEN
	1274	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1275	'must be set'
[226]	1276	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1277	ENDIF
[1]	1278
	1279	!
	1280	!-- A given surface temperature implies Dirichlet boundary condition for
	1281	!-- temperature. In this case specification of a constant heat flux is
	1282	!-- forbidden.
	1283	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1284	surface_heatflux /= 0.0 ) THEN
[215]	1285	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1286	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1287	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1288	ENDIF
	1289	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1290	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1291	'wed with pt_surface_initial_change (/=0) = ', &
	1292	pt_surface_initial_change
[226]	1293	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1294	ENDIF
	1295
	1296	!
[19]	1297	!-- A given temperature at the top implies Dirichlet boundary condition for
	1298	!-- temperature. In this case specification of a constant heat flux is
	1299	!-- forbidden.
	1300	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1301	top_heatflux /= 0.0 ) THEN
[215]	1302	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1303	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1304	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1305	ENDIF
	1306
	1307	!
[95]	1308	!-- Boundary conditions for salinity
	1309	IF ( ocean ) THEN
	1310	IF ( bc_sa_t == 'dirichlet' ) THEN
	1311	ibc_sa_t = 0
	1312	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1313	ibc_sa_t = 1
	1314	ELSE
[215]	1315	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1316	TRIM( bc_sa_t ) // '"'
[226]	1317	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1318	ENDIF
	1319
	1320	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1321	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1322	message_string = 'boundary condition: bc_sa_t = "' // &
	1323	TRIM( bc_sa_t ) // '" requires to set ' // &
	1324	'top_salinityflux'
[226]	1325	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1326	ENDIF
[95]	1327
	1328	!
	1329	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1330	!-- salinity. In this case specification of a constant salinity flux is
	1331	!-- forbidden.
	1332	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1333	top_salinityflux /= 0.0 ) THEN
[215]	1334	message_string = 'boundary condition: bc_sa_t = "' // &
	1335	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1336	'constant_top_salinityflux = .TRUE.'
[226]	1337	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1338	ENDIF
	1339
	1340	ENDIF
	1341
	1342	!
[75]	1343	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1344	!-- water content / scalar
[75]	1345	IF ( humidity .OR. passive_scalar ) THEN
	1346	IF ( humidity ) THEN
[1]	1347	sq = 'q'
	1348	ELSE
	1349	sq = 's'
	1350	ENDIF
	1351	IF ( bc_q_b == 'dirichlet' ) THEN
	1352	ibc_q_b = 0
	1353	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1354	ibc_q_b = 1
	1355	ELSE
[215]	1356	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1357	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1358	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1359	ENDIF
	1360	IF ( bc_q_t == 'dirichlet' ) THEN
	1361	ibc_q_t = 0
	1362	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1363	ibc_q_t = 1
	1364	ELSE
[215]	1365	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1366	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1367	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1368	ENDIF
	1369
	1370	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1371
	1372	!
	1373	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1374	!-- humidity. In this case specification of a constant water flux is
[1]	1375	!-- forbidden.
	1376	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1377	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1378	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1379	'th prescribed surface flux'
[226]	1380	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1381	ENDIF
	1382	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1383	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1384	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1385	q_surface_initial_change
[226]	1386	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1387	ENDIF
	1388
	1389	ENDIF
	1390
	1391	!
	1392	!-- Boundary conditions for horizontal components of wind speed
	1393	IF ( bc_uv_b == 'dirichlet' ) THEN
	1394	ibc_uv_b = 0
	1395	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1396	ibc_uv_b = 1
	1397	IF ( prandtl_layer ) THEN
[215]	1398	message_string = 'boundary condition: bc_uv_b = "' // &
	1399	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1400	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1401	ENDIF
	1402	ELSE
[215]	1403	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1404	TRIM( bc_uv_b ) // '"'
[226]	1405	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1406	ENDIF
[215]	1407
[108]	1408	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1409	bc_uv_t = 'neumann'
[1]	1410	ibc_uv_t = 1
	1411	ELSE
[132]	1412	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1413	ibc_uv_t = 0
	1414	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1415	ibc_uv_t = 1
	1416	ELSE
[215]	1417	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1418	TRIM( bc_uv_t ) // '"'
[226]	1419	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1420	ENDIF
	1421	ENDIF
	1422
	1423	!
	1424	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1425	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1426	IF ( momentum_advec == 'ups-scheme' ) THEN
	1427	rayleigh_damping_factor = 0.01
	1428	ELSE
	1429	rayleigh_damping_factor = 0.0
	1430	ENDIF
	1431	ELSE
	1432	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1433	THEN
[215]	1434	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1435	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1436	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1437	ENDIF
	1438	ENDIF
	1439
	1440	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1441	IF ( .NOT. ocean ) THEN
	1442	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1443	ELSE
	1444	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1445	ENDIF
[1]	1446	ELSE
[108]	1447	IF ( .NOT. ocean ) THEN
	1448	IF ( rayleigh_damping_height < 0.0 .OR. &
	1449	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1450	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1451	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1452	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1453	ENDIF
[108]	1454	ELSE
	1455	IF ( rayleigh_damping_height > 0.0 .OR. &
	1456	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1457	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1458	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1459	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1460	ENDIF
[1]	1461	ENDIF
	1462	ENDIF
	1463
	1464	!
	1465	!-- Check limiters for Upstream-Spline scheme
	1466	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1467	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1468	overshoot_limit_e < 0.0 ) THEN
[215]	1469	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1470	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1471	ENDIF
	1472	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1473	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1474	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1475	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1476	ENDIF
	1477
	1478	!
	1479	!-- Check number of chosen statistic regions. More than 10 regions are not
	1480	!-- allowed, because so far no more than 10 corresponding output files can
	1481	!-- be opened (cf. check_open)
	1482	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1483	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1484	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1485	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1486	ENDIF
	1487	IF ( normalizing_region > statistic_regions .OR. &
	1488	normalizing_region < 0) THEN
[215]	1489	WRITE ( message_string, * ) 'normalizing_region = ', &
	1490	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1491	' (value of statistic_regions)'
[226]	1492	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1493	ENDIF
	1494
	1495	!
[116]	1496	!-- Check the interval for sorting particles.
	1497	!-- Using particles as cloud droplets requires sorting after each timestep.
	1498	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1499	dt_sort_particles = 0.0
[215]	1500	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1501	'_droplets = .TRUE.'
[226]	1502	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1503	ENDIF
	1504
	1505	!
[1]	1506	!-- Set the default intervals for data output, if necessary
	1507	!-- NOTE: dt_dosp has already been set in package_parin
	1508	IF ( dt_data_output /= 9999999.9 ) THEN
	1509	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1510	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1511	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1512	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1513	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1514	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1515	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1516	DO mid = 1, max_masks
[410]	1517	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1518	ENDDO
[1]	1519	ENDIF
	1520
	1521	!
	1522	!-- Set the default skip time intervals for data output, if necessary
	1523	IF ( skip_time_dopr == 9999999.9 ) &
	1524	skip_time_dopr = skip_time_data_output
	1525	IF ( skip_time_dosp == 9999999.9 ) &
	1526	skip_time_dosp = skip_time_data_output
	1527	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1528	skip_time_do2d_xy = skip_time_data_output
	1529	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1530	skip_time_do2d_xz = skip_time_data_output
	1531	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1532	skip_time_do2d_yz = skip_time_data_output
	1533	IF ( skip_time_do3d == 9999999.9 ) &
	1534	skip_time_do3d = skip_time_data_output
	1535	IF ( skip_time_data_output_av == 9999999.9 ) &
	1536	skip_time_data_output_av = skip_time_data_output
[564]	1537	DO mid = 1, max_masks
[410]	1538	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1539	skip_time_domask(mid) = skip_time_data_output
	1540	ENDDO
[1]	1541
	1542	!
	1543	!-- Check the average intervals (first for 3d-data, then for profiles and
	1544	!-- spectra)
	1545	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1546	WRITE( message_string, * ) 'averaging_interval = ', &
	1547	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1548	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1549	ENDIF
	1550
	1551	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1552	averaging_interval_pr = averaging_interval
	1553	ENDIF
	1554
	1555	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1556	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1557	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1558	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1559	ENDIF
	1560
	1561	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1562	averaging_interval_sp = averaging_interval
	1563	ENDIF
	1564
	1565	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1566	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1567	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1568	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1569	ENDIF
	1570
	1571	!
	1572	!-- Set the default interval for profiles entering the temporal average
	1573	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1574	dt_averaging_input_pr = dt_averaging_input
	1575	ENDIF
	1576
	1577	!
	1578	!-- Set the default interval for the output of timeseries to a reasonable
	1579	!-- value (tries to minimize the number of calls of flow_statistics)
	1580	IF ( dt_dots == 9999999.9 ) THEN
	1581	IF ( averaging_interval_pr == 0.0 ) THEN
	1582	dt_dots = MIN( dt_run_control, dt_dopr )
	1583	ELSE
	1584	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1585	ENDIF
	1586	ENDIF
	1587
	1588	!
	1589	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1590	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1591	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1592	dt_averaging_input, ' must be <= averaging_interval = ', &
	1593	averaging_interval
[226]	1594	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1595	ENDIF
	1596
	1597	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1598	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1599	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1600	averaging_interval_pr
[226]	1601	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1602	ENDIF
	1603
	1604	!
[72]	1605	!-- Set the default value for the integration interval of precipitation amount
	1606	IF ( precipitation ) THEN
	1607	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1608	precipitation_amount_interval = dt_do2d_xy
	1609	ELSE
	1610	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1611	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1612	precipitation_amount_interval, ' must not be larger than ', &
	1613	'dt_do2d_xy = ', dt_do2d_xy
[226]	1614	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1615	ENDIF
	1616	ENDIF
	1617	ENDIF
	1618
	1619	!
[1]	1620	!-- Determine the number of output profiles and check whether they are
	1621	!-- permissible
	1622	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1623
	1624	dopr_n = dopr_n + 1
	1625	i = dopr_n
	1626
	1627	!
	1628	!-- Determine internal profile number (for hom, homs)
	1629	!-- and store height levels
	1630	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1631
	1632	CASE ( 'u', '#u' )
	1633	dopr_index(i) = 1
[87]	1634	dopr_unit(i) = 'm/s'
[1]	1635	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1636	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1637	dopr_initial_index(i) = 5
	1638	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1639	data_output_pr(i) = data_output_pr(i)(2:)
	1640	ENDIF
	1641
	1642	CASE ( 'v', '#v' )
	1643	dopr_index(i) = 2
[87]	1644	dopr_unit(i) = 'm/s'
	1645	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1646	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1647	dopr_initial_index(i) = 6
	1648	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1649	data_output_pr(i) = data_output_pr(i)(2:)
	1650	ENDIF
	1651
	1652	CASE ( 'w' )
	1653	dopr_index(i) = 3
[87]	1654	dopr_unit(i) = 'm/s'
	1655	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1656
	1657	CASE ( 'pt', '#pt' )
	1658	IF ( .NOT. cloud_physics ) THEN
	1659	dopr_index(i) = 4
[87]	1660	dopr_unit(i) = 'K'
[1]	1661	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1662	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1663	dopr_initial_index(i) = 7
	1664	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1665	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1666	data_output_pr(i) = data_output_pr(i)(2:)
	1667	ENDIF
	1668	ELSE
	1669	dopr_index(i) = 43
[87]	1670	dopr_unit(i) = 'K'
[1]	1671	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1672	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1673	dopr_initial_index(i) = 28
	1674	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1675	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1676	data_output_pr(i) = data_output_pr(i)(2:)
	1677	ENDIF
	1678	ENDIF
	1679
	1680	CASE ( 'e' )
	1681	dopr_index(i) = 8
[87]	1682	dopr_unit(i) = 'm2/s2'
[1]	1683	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1684	hom(nzb,2,8,:) = 0.0
	1685
	1686	CASE ( 'km', '#km' )
	1687	dopr_index(i) = 9
[87]	1688	dopr_unit(i) = 'm2/s'
[1]	1689	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1690	hom(nzb,2,9,:) = 0.0
	1691	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1692	dopr_initial_index(i) = 23
	1693	hom(:,2,23,:) = hom(:,2,9,:)
	1694	data_output_pr(i) = data_output_pr(i)(2:)
	1695	ENDIF
	1696
	1697	CASE ( 'kh', '#kh' )
	1698	dopr_index(i) = 10
[87]	1699	dopr_unit(i) = 'm2/s'
[1]	1700	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1701	hom(nzb,2,10,:) = 0.0
	1702	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1703	dopr_initial_index(i) = 24
	1704	hom(:,2,24,:) = hom(:,2,10,:)
	1705	data_output_pr(i) = data_output_pr(i)(2:)
	1706	ENDIF
	1707
	1708	CASE ( 'l', '#l' )
	1709	dopr_index(i) = 11
[87]	1710	dopr_unit(i) = 'm'
[1]	1711	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1712	hom(nzb,2,11,:) = 0.0
	1713	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1714	dopr_initial_index(i) = 25
	1715	hom(:,2,25,:) = hom(:,2,11,:)
	1716	data_output_pr(i) = data_output_pr(i)(2:)
	1717	ENDIF
	1718
	1719	CASE ( 'w"u"' )
	1720	dopr_index(i) = 12
[87]	1721	dopr_unit(i) = 'm2/s2'
[1]	1722	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1723	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1724
	1725	CASE ( 'wu' )
	1726	dopr_index(i) = 13
[87]	1727	dopr_unit(i) = 'm2/s2'
[1]	1728	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1729
	1730	CASE ( 'w"v"' )
	1731	dopr_index(i) = 14
[87]	1732	dopr_unit(i) = 'm2/s2'
[1]	1733	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1734	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1735
	1736	CASE ( 'wv' )
	1737	dopr_index(i) = 15
[87]	1738	dopr_unit(i) = 'm2/s2'
[1]	1739	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1740
	1741	CASE ( 'w"pt"' )
	1742	dopr_index(i) = 16
[87]	1743	dopr_unit(i) = 'K m/s'
[1]	1744	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1745
	1746	CASE ( 'wpt' )
	1747	dopr_index(i) = 17
[87]	1748	dopr_unit(i) = 'K m/s'
[1]	1749	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1750
	1751	CASE ( 'wpt' )
	1752	dopr_index(i) = 18
[87]	1753	dopr_unit(i) = 'K m/s'
[1]	1754	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1755
	1756	CASE ( 'wu' )
	1757	dopr_index(i) = 19
[87]	1758	dopr_unit(i) = 'm2/s2'
[1]	1759	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1760	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1761
	1762	CASE ( 'wv' )
	1763	dopr_index(i) = 20
[87]	1764	dopr_unit(i) = 'm2/s2'
[1]	1765	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1766	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1767
	1768	CASE ( 'wptBC' )
	1769	dopr_index(i) = 21
[87]	1770	dopr_unit(i) = 'K m/s'
[1]	1771	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1772
	1773	CASE ( 'wptBC' )
	1774	dopr_index(i) = 22
[87]	1775	dopr_unit(i) = 'K m/s'
[1]	1776	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1777
[96]	1778	CASE ( 'sa', '#sa' )
	1779	IF ( .NOT. ocean ) THEN
[215]	1780	message_string = 'data_output_pr = ' // &
	1781	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1782	'lemented for ocean = .FALSE.'
[226]	1783	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1784	ELSE
	1785	dopr_index(i) = 23
	1786	dopr_unit(i) = 'psu'
	1787	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1788	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1789	dopr_initial_index(i) = 26
	1790	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1791	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1792	data_output_pr(i) = data_output_pr(i)(2:)
	1793	ENDIF
	1794	ENDIF
	1795
[1]	1796	CASE ( 'u*2' )
	1797	dopr_index(i) = 30
[87]	1798	dopr_unit(i) = 'm2/s2'
[1]	1799	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1800
	1801	CASE ( 'v*2' )
	1802	dopr_index(i) = 31
[87]	1803	dopr_unit(i) = 'm2/s2'
[1]	1804	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1805
	1806	CASE ( 'w*2' )
	1807	dopr_index(i) = 32
[87]	1808	dopr_unit(i) = 'm2/s2'
[1]	1809	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1810
	1811	CASE ( 'pt*2' )
	1812	dopr_index(i) = 33
[87]	1813	dopr_unit(i) = 'K2'
[1]	1814	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1815
	1816	CASE ( 'e*' )
	1817	dopr_index(i) = 34
[87]	1818	dopr_unit(i) = 'm2/s2'
[1]	1819	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1820
	1821	CASE ( 'w2pt' )
	1822	dopr_index(i) = 35
[87]	1823	dopr_unit(i) = 'K m2/s2'
[1]	1824	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1825
	1826	CASE ( 'wpt2' )
	1827	dopr_index(i) = 36
[87]	1828	dopr_unit(i) = 'K2 m/s'
[1]	1829	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1830
	1831	CASE ( 'we' )
	1832	dopr_index(i) = 37
[87]	1833	dopr_unit(i) = 'm3/s3'
[1]	1834	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1835
	1836	CASE ( 'w*3' )
	1837	dopr_index(i) = 38
[87]	1838	dopr_unit(i) = 'm3/s3'
[1]	1839	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1840
	1841	CASE ( 'Sw' )
	1842	dopr_index(i) = 39
[89]	1843	dopr_unit(i) = 'none'
[1]	1844	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1845
[232]	1846	CASE ( 'p' )
	1847	dopr_index(i) = 40
	1848	dopr_unit(i) = 'Pa'
	1849	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1850
[1]	1851	CASE ( 'q', '#q' )
[108]	1852	IF ( .NOT. humidity ) THEN
[215]	1853	message_string = 'data_output_pr = ' // &
	1854	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1855	'lemented for humidity = .FALSE.'
[226]	1856	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1857	ELSE
	1858	dopr_index(i) = 41
[87]	1859	dopr_unit(i) = 'kg/kg'
	1860	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1861	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1862	dopr_initial_index(i) = 26
	1863	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1864	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1865	data_output_pr(i) = data_output_pr(i)(2:)
	1866	ENDIF
	1867	ENDIF
	1868
	1869	CASE ( 's', '#s' )
	1870	IF ( .NOT. passive_scalar ) THEN
[215]	1871	message_string = 'data_output_pr = ' // &
	1872	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1873	'lemented for passive_scalar = .FALSE.'
[226]	1874	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1875	ELSE
	1876	dopr_index(i) = 41
[87]	1877	dopr_unit(i) = 'kg/m3'
	1878	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1879	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1880	dopr_initial_index(i) = 26
	1881	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1882	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1883	data_output_pr(i) = data_output_pr(i)(2:)
	1884	ENDIF
	1885	ENDIF
	1886
	1887	CASE ( 'qv', '#qv' )
	1888	IF ( .NOT. cloud_physics ) THEN
	1889	dopr_index(i) = 41
[87]	1890	dopr_unit(i) = 'kg/kg'
	1891	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1892	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1893	dopr_initial_index(i) = 26
	1894	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1895	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1896	data_output_pr(i) = data_output_pr(i)(2:)
	1897	ENDIF
	1898	ELSE
	1899	dopr_index(i) = 42
[87]	1900	dopr_unit(i) = 'kg/kg'
	1901	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1902	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1903	dopr_initial_index(i) = 27
	1904	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1905	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1906	data_output_pr(i) = data_output_pr(i)(2:)
	1907	ENDIF
	1908	ENDIF
	1909
	1910	CASE ( 'lpt', '#lpt' )
	1911	IF ( .NOT. cloud_physics ) THEN
[215]	1912	message_string = 'data_output_pr = ' // &
	1913	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1914	'lemented for cloud_physics = .FALSE.'
[226]	1915	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	1916	ELSE
	1917	dopr_index(i) = 4
[87]	1918	dopr_unit(i) = 'K'
[1]	1919	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1920	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1921	dopr_initial_index(i) = 7
	1922	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1923	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1924	data_output_pr(i) = data_output_pr(i)(2:)
	1925	ENDIF
	1926	ENDIF
	1927
	1928	CASE ( 'vpt', '#vpt' )
	1929	dopr_index(i) = 44
[87]	1930	dopr_unit(i) = 'K'
	1931	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1932	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1933	dopr_initial_index(i) = 29
	1934	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1935	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1936	data_output_pr(i) = data_output_pr(i)(2:)
	1937	ENDIF
	1938
	1939	CASE ( 'w"vpt"' )
	1940	dopr_index(i) = 45
[87]	1941	dopr_unit(i) = 'K m/s'
[1]	1942	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1943
	1944	CASE ( 'wvpt' )
	1945	dopr_index(i) = 46
[87]	1946	dopr_unit(i) = 'K m/s'
[1]	1947	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1948
	1949	CASE ( 'wvpt' )
	1950	dopr_index(i) = 47
[87]	1951	dopr_unit(i) = 'K m/s'
[1]	1952	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1953
	1954	CASE ( 'w"q"' )
[108]	1955	IF ( .NOT. humidity ) THEN
[215]	1956	message_string = 'data_output_pr = ' // &
	1957	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1958	'lemented for humidity = .FALSE.'
[226]	1959	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1960	ELSE
	1961	dopr_index(i) = 48
[87]	1962	dopr_unit(i) = 'kg/kg m/s'
[1]	1963	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1964	ENDIF
	1965
	1966	CASE ( 'wq' )
[108]	1967	IF ( .NOT. humidity ) THEN
[215]	1968	message_string = 'data_output_pr = ' // &
	1969	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1970	'lemented for humidity = .FALSE.'
[226]	1971	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1972	ELSE
	1973	dopr_index(i) = 49
[87]	1974	dopr_unit(i) = 'kg/kg m/s'
[1]	1975	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1976	ENDIF
	1977
	1978	CASE ( 'wq' )
[108]	1979	IF ( .NOT. humidity ) THEN
[215]	1980	message_string = 'data_output_pr = ' // &
	1981	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1982	'lemented for humidity = .FALSE.'
[226]	1983	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1984	ELSE
	1985	dopr_index(i) = 50
[87]	1986	dopr_unit(i) = 'kg/kg m/s'
[1]	1987	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1988	ENDIF
	1989
	1990	CASE ( 'w"s"' )
	1991	IF ( .NOT. passive_scalar ) THEN
[215]	1992	message_string = 'data_output_pr = ' // &
	1993	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1994	'lemented for passive_scalar = .FALSE.'
[226]	1995	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1996	ELSE
	1997	dopr_index(i) = 48
[87]	1998	dopr_unit(i) = 'kg/m3 m/s'
[1]	1999	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2000	ENDIF
	2001
	2002	CASE ( 'ws' )
	2003	IF ( .NOT. passive_scalar ) THEN
[215]	2004	message_string = 'data_output_pr = ' // &
	2005	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2006	'lemented for passive_scalar = .FALSE.'
[226]	2007	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2008	ELSE
	2009	dopr_index(i) = 49
[87]	2010	dopr_unit(i) = 'kg/m3 m/s'
[1]	2011	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2012	ENDIF
	2013
	2014	CASE ( 'ws' )
	2015	IF ( .NOT. passive_scalar ) THEN
[215]	2016	message_string = 'data_output_pr = ' // &
	2017	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2018	'lemented for passive_scalar = .FALSE.'
[226]	2019	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2020	ELSE
	2021	dopr_index(i) = 50
[87]	2022	dopr_unit(i) = 'kg/m3 m/s'
[1]	2023	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2024	ENDIF
	2025
	2026	CASE ( 'w"qv"' )
[75]	2027	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2028	THEN
	2029	dopr_index(i) = 48
[87]	2030	dopr_unit(i) = 'kg/kg m/s'
[1]	2031	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2032	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2033	dopr_index(i) = 51
[87]	2034	dopr_unit(i) = 'kg/kg m/s'
[1]	2035	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2036	ELSE
[215]	2037	message_string = 'data_output_pr = ' // &
	2038	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2039	'lemented for cloud_physics = .FALSE. an&' // &
	2040	'd humidity = .FALSE.'
[226]	2041	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2042	ENDIF
	2043
	2044	CASE ( 'wqv' )
[75]	2045	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2046	THEN
	2047	dopr_index(i) = 49
[87]	2048	dopr_unit(i) = 'kg/kg m/s'
[1]	2049	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2050	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2051	dopr_index(i) = 52
[87]	2052	dopr_unit(i) = 'kg/kg m/s'
[1]	2053	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2054	ELSE
[215]	2055	message_string = 'data_output_pr = ' // &
	2056	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2057	'lemented for cloud_physics = .FALSE. an&' // &
	2058	'd humidity = .FALSE.'
[226]	2059	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2060	ENDIF
	2061
	2062	CASE ( 'wqv' )
[75]	2063	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2064	THEN
	2065	dopr_index(i) = 50
[87]	2066	dopr_unit(i) = 'kg/kg m/s'
[1]	2067	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2068	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2069	dopr_index(i) = 53
[87]	2070	dopr_unit(i) = 'kg/kg m/s'
[1]	2071	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2072	ELSE
[215]	2073	message_string = 'data_output_pr = ' // &
	2074	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2075	'lemented for cloud_physics = .FALSE. an&' // &
	2076	'd humidity = .FALSE.'
[226]	2077	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2078	ENDIF
	2079
	2080	CASE ( 'ql' )
	2081	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2082	message_string = 'data_output_pr = ' // &
	2083	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2084	'lemented for cloud_physics = .FALSE. or' // &
	2085	'&cloud_droplets = .FALSE.'
[226]	2086	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2087	ELSE
	2088	dopr_index(i) = 54
[87]	2089	dopr_unit(i) = 'kg/kg'
[1]	2090	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2091	ENDIF
	2092
[524]	2093	CASE ( 'wuu*:dz' )
[1]	2094	dopr_index(i) = 55
[87]	2095	dopr_unit(i) = 'm2/s3'
[1]	2096	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2097
[524]	2098	CASE ( 'wp:dz' )
[1]	2099	dopr_index(i) = 56
[87]	2100	dopr_unit(i) = 'm2/s3'
[106]	2101	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2102
[524]	2103	CASE ( 'w"e:dz' )
[1]	2104	dopr_index(i) = 57
[87]	2105	dopr_unit(i) = 'm2/s3'
[1]	2106	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2107
	2108	CASE ( 'u"pt"' )
	2109	dopr_index(i) = 58
[87]	2110	dopr_unit(i) = 'K m/s'
[1]	2111	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2112
	2113	CASE ( 'upt' )
	2114	dopr_index(i) = 59
[87]	2115	dopr_unit(i) = 'K m/s'
[1]	2116	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2117
	2118	CASE ( 'upt_t' )
	2119	dopr_index(i) = 60
[87]	2120	dopr_unit(i) = 'K m/s'
[1]	2121	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2122
	2123	CASE ( 'v"pt"' )
	2124	dopr_index(i) = 61
[87]	2125	dopr_unit(i) = 'K m/s'
[1]	2126	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2127
	2128	CASE ( 'vpt' )
	2129	dopr_index(i) = 62
[87]	2130	dopr_unit(i) = 'K m/s'
[1]	2131	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2132
	2133	CASE ( 'vpt_t' )
	2134	dopr_index(i) = 63
[87]	2135	dopr_unit(i) = 'K m/s'
[1]	2136	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2137
[96]	2138	CASE ( 'rho' )
[388]	2139	IF ( .NOT. ocean ) THEN
	2140	message_string = 'data_output_pr = ' // &
	2141	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2142	'lemented for ocean = .FALSE.'
	2143	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2144	ELSE
	2145	dopr_index(i) = 64
	2146	dopr_unit(i) = 'kg/m3'
	2147	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2148	ENDIF
[1]	2149
[96]	2150	CASE ( 'w"sa"' )
	2151	IF ( .NOT. ocean ) THEN
[215]	2152	message_string = 'data_output_pr = ' // &
	2153	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2154	'lemented for ocean = .FALSE.'
[226]	2155	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2156	ELSE
	2157	dopr_index(i) = 65
	2158	dopr_unit(i) = 'psu m/s'
	2159	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2160	ENDIF
	2161
	2162	CASE ( 'wsa' )
	2163	IF ( .NOT. ocean ) THEN
[215]	2164	message_string = 'data_output_pr = ' // &
	2165	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2166	'lemented for ocean = .FALSE.'
[226]	2167	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2168	ELSE
	2169	dopr_index(i) = 66
	2170	dopr_unit(i) = 'psu m/s'
	2171	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2172	ENDIF
	2173
	2174	CASE ( 'wsa' )
	2175	IF ( .NOT. ocean ) THEN
[215]	2176	message_string = 'data_output_pr = ' // &
	2177	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2178	'lemented for ocean = .FALSE.'
[226]	2179	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2180	ELSE
	2181	dopr_index(i) = 67
	2182	dopr_unit(i) = 'psu m/s'
	2183	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2184	ENDIF
	2185
[106]	2186	CASE ( 'wp' )
	2187	dopr_index(i) = 68
	2188	dopr_unit(i) = 'm3/s3'
	2189	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2190
[106]	2191	CASE ( 'w"e' )
	2192	dopr_index(i) = 69
	2193	dopr_unit(i) = 'm3/s3'
	2194	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2195
[197]	2196	CASE ( 'q*2' )
	2197	IF ( .NOT. humidity ) THEN
[215]	2198	message_string = 'data_output_pr = ' // &
	2199	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2200	'lemented for humidity = .FALSE.'
[226]	2201	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2202	ELSE
	2203	dopr_index(i) = 70
	2204	dopr_unit(i) = 'kg2/kg2'
	2205	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2206	ENDIF
[106]	2207
[388]	2208	CASE ( 'prho' )
	2209	IF ( .NOT. ocean ) THEN
	2210	message_string = 'data_output_pr = ' // &
	2211	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2212	'lemented for ocean = .FALSE.'
	2213	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2214	ELSE
	2215	dopr_index(i) = 71
	2216	dopr_unit(i) = 'kg/m3'
	2217	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2218	ENDIF
	2219
	2220	CASE ( 'hyp' )
	2221	dopr_index(i) = 72
[531]	2222	dopr_unit(i) = 'dbar'
[388]	2223	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2224
[1]	2225	CASE DEFAULT
[87]	2226
	2227	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2228
	2229	IF ( unit == 'illegal' ) THEN
[215]	2230	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2231	message_string = 'illegal value for data_output_pr or ' // &
	2232	'data_output_pr_user = "' // &
	2233	TRIM( data_output_pr(i) ) // '"'
[226]	2234	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2235	ELSE
	2236	message_string = 'illegal value for data_output_pr = "' // &
	2237	TRIM( data_output_pr(i) ) // '"'
[226]	2238	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2239	ENDIF
[1]	2240	ENDIF
	2241
	2242	END SELECT
	2243	!
	2244	!-- Check to which of the predefined coordinate systems the profile belongs
	2245	DO k = 1, crmax
	2246	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2247	/=0 ) &
	2248	THEN
	2249	dopr_crossindex(i) = k
	2250	EXIT
	2251	ENDIF
	2252	ENDDO
	2253	!
	2254	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2255	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2256	!-- control characters
	2257	dopr_label(i) = data_output_pr(i)
	2258	position = INDEX( dopr_label(i) , '"' )
	2259	DO WHILE ( position /= 0 )
	2260	dopr_label(i)(position:position) = ''''
	2261	position = INDEX( dopr_label(i) , '"' )
	2262	ENDDO
	2263
	2264	ENDDO
	2265
	2266	!
	2267	!-- y-value range of the coordinate system (PROFIL).
	2268	!-- x-value range determined in plot_1d.
[94]	2269	IF ( .NOT. ocean ) THEN
	2270	cross_uymin = 0.0
	2271	IF ( z_max_do1d == -1.0 ) THEN
	2272	cross_uymax = zu(nzt+1)
	2273	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2274	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2275	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2276	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2277	ELSE
	2278	cross_uymax = z_max_do1d
	2279	ENDIF
[1]	2280	ENDIF
	2281
	2282	!
	2283	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2284	!-- permissible
	2285	DO i = 1, crmax
	2286	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2287
	2288	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2289	j = 0
	2290
	2291	CASE DEFAULT
[215]	2292	message_string = 'unknown normalization method cross_normali' // &
	2293	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2294	'"'
[226]	2295	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2296
	2297	END SELECT
	2298	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2299
	2300	CASE ( '', 'z_i' )
	2301	j = 0
	2302
	2303	CASE DEFAULT
[215]	2304	message_string = 'unknown normalization method cross_normali' // &
	2305	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2306	'"'
[226]	2307	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2308
	2309	END SELECT
	2310	ENDDO
	2311	!
	2312	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2313	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2314	THEN
[215]	2315	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2316	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2317	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2318	ENDIF
	2319
	2320
	2321	!
	2322	!-- Append user-defined data output variables to the standard data output
	2323	IF ( data_output_user(1) /= ' ' ) THEN
	2324	i = 1
	2325	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2326	i = i + 1
	2327	ENDDO
	2328	j = 1
	2329	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2330	IF ( i > 100 ) THEN
[215]	2331	message_string = 'number of output quantitities given by data' // &
	2332	'_output and data_output_user exceeds the limit of 100'
[226]	2333	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2334	ENDIF
	2335	data_output(i) = data_output_user(j)
	2336	i = i + 1
	2337	j = j + 1
	2338	ENDDO
	2339	ENDIF
	2340
	2341	!
	2342	!-- Check and set steering parameters for 2d/3d data output and averaging
	2343	i = 1
	2344	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2345	!
	2346	!-- Check for data averaging
	2347	ilen = LEN_TRIM( data_output(i) )
	2348	j = 0 ! no data averaging
	2349	IF ( ilen > 3 ) THEN
	2350	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2351	j = 1 ! data averaging
	2352	data_output(i) = data_output(i)(1:ilen-3)
	2353	ENDIF
	2354	ENDIF
	2355	!
	2356	!-- Check for cross section or volume data
	2357	ilen = LEN_TRIM( data_output(i) )
	2358	k = 0 ! 3d data
	2359	var = data_output(i)(1:ilen)
	2360	IF ( ilen > 3 ) THEN
	2361	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2362	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2363	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2364	k = 1 ! 2d data
	2365	var = data_output(i)(1:ilen-3)
	2366	ENDIF
	2367	ENDIF
	2368	!
	2369	!-- Check for allowed value and set units
	2370	SELECT CASE ( TRIM( var ) )
	2371
	2372	CASE ( 'e' )
	2373	IF ( constant_diffusion ) THEN
[215]	2374	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2375	'res constant_diffusion = .FALSE.'
[226]	2376	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2377	ENDIF
	2378	unit = 'm2/s2'
	2379
	2380	CASE ( 'pc', 'pr' )
	2381	IF ( .NOT. particle_advection ) THEN
[215]	2382	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2383	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2384	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2385	ENDIF
	2386	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2387	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2388
	2389	CASE ( 'q', 'vpt' )
[75]	2390	IF ( .NOT. humidity ) THEN
[215]	2391	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2392	'res humidity = .TRUE.'
[226]	2393	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2394	ENDIF
	2395	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2396	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2397
	2398	CASE ( 'ql' )
	2399	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2400	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2401	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2402	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2403	ENDIF
	2404	unit = 'kg/kg'
	2405
	2406	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2407	IF ( .NOT. cloud_droplets ) THEN
[215]	2408	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2409	'res cloud_droplets = .TRUE.'
[226]	2410	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2411	ENDIF
	2412	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2413	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2414	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2415
	2416	CASE ( 'qv' )
	2417	IF ( .NOT. cloud_physics ) THEN
[215]	2418	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2419	'res cloud_physics = .TRUE.'
[226]	2420	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2421	ENDIF
	2422	unit = 'kg/kg'
	2423
[96]	2424	CASE ( 'rho' )
	2425	IF ( .NOT. ocean ) THEN
[215]	2426	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2427	'res ocean = .TRUE.'
[226]	2428	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2429	ENDIF
	2430	unit = 'kg/m3'
	2431
[1]	2432	CASE ( 's' )
	2433	IF ( .NOT. passive_scalar ) THEN
[215]	2434	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2435	'res passive_scalar = .TRUE.'
[226]	2436	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2437	ENDIF
	2438	unit = 'conc'
	2439
[96]	2440	CASE ( 'sa' )
	2441	IF ( .NOT. ocean ) THEN
[215]	2442	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2443	'res ocean = .TRUE.'
[226]	2444	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2445	ENDIF
	2446	unit = 'psu'
	2447
[354]	2448	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2449	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2450	message_string = 'illegal value for data_output: "' // &
	2451	TRIM( var ) // '" & only 2d-horizontal ' // &
	2452	'cross sections are allowed for this value'
[226]	2453	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2454	ENDIF
	2455	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2456	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2457	'res cloud_physics = .TRUE.'
[226]	2458	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2459	ENDIF
[72]	2460	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2461	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2462	'res precipitation = .TRUE.'
[226]	2463	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2464	ENDIF
	2465	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2466	message_string = 'temporal averaging of precipitation ' // &
	2467	'amount "' // TRIM( var ) // '" is not possible'
[226]	2468	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2469	ENDIF
	2470	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2471	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2472	'res precipitation = .TRUE.'
[226]	2473	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2474	ENDIF
[354]	2475	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2476	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2477	'res humidity = .TRUE.'
	2478	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2479	ENDIF
[72]	2480
[354]	2481	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2482	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2483	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2484	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2485	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2486	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2487	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2488	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2489
[1]	2490
	2491	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2492	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2493	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2494	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2495	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2496	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2497	CONTINUE
	2498
	2499	CASE DEFAULT
	2500	CALL user_check_data_output( var, unit )
	2501
	2502	IF ( unit == 'illegal' ) THEN
[215]	2503	IF ( data_output_user(1) /= ' ' ) THEN
	2504	message_string = 'illegal value for data_output or ' // &
	2505	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2506	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2507	ELSE
	2508	message_string = 'illegal value for data_output =' // &
	2509	TRIM( data_output(i) ) // '"'
[226]	2510	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2511	ENDIF
	2512	ENDIF
	2513
	2514	END SELECT
	2515	!
	2516	!-- Set the internal steering parameters appropriately
	2517	IF ( k == 0 ) THEN
	2518	do3d_no(j) = do3d_no(j) + 1
	2519	do3d(j,do3d_no(j)) = data_output(i)
	2520	do3d_unit(j,do3d_no(j)) = unit
	2521	ELSE
	2522	do2d_no(j) = do2d_no(j) + 1
	2523	do2d(j,do2d_no(j)) = data_output(i)
	2524	do2d_unit(j,do2d_no(j)) = unit
	2525	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2526	data_output_xy(j) = .TRUE.
	2527	ENDIF
	2528	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2529	data_output_xz(j) = .TRUE.
	2530	ENDIF
	2531	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2532	data_output_yz(j) = .TRUE.
	2533	ENDIF
	2534	ENDIF
	2535
	2536	IF ( j == 1 ) THEN
	2537	!
	2538	!-- Check, if variable is already subject to averaging
	2539	found = .FALSE.
	2540	DO k = 1, doav_n
	2541	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2542	ENDDO
	2543
	2544	IF ( .NOT. found ) THEN
	2545	doav_n = doav_n + 1
	2546	doav(doav_n) = var
	2547	ENDIF
	2548	ENDIF
	2549
	2550	i = i + 1
	2551	ENDDO
	2552
	2553	!
[376]	2554	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2555	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2556	WRITE( message_string, * ) 'output of averaged quantity "', &
	2557	TRIM( doav(1) ), '_av" requires to set a ', &
	2558	'non-zero & averaging interval'
	2559	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2560	ENDIF
	2561
	2562	!
[308]	2563	!-- Check sectional planes and store them in one shared array
	2564	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2565	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2566	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2567	ENDIF
	2568	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2569	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2570	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2571	ENDIF
	2572	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2573	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2574	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2575	ENDIF
[1]	2576	section(:,1) = section_xy
	2577	section(:,2) = section_xz
	2578	section(:,3) = section_yz
	2579
	2580	!
	2581	!-- Upper plot limit (grid point value) for 1D profiles
	2582	IF ( z_max_do1d == -1.0 ) THEN
	2583	nz_do1d = nzt+1
	2584	ELSE
	2585	DO k = nzb+1, nzt+1
	2586	nz_do1d = k
	2587	IF ( zw(k) > z_max_do1d ) EXIT
	2588	ENDDO
	2589	ENDIF
	2590
	2591	!
	2592	!-- Upper plot limit for 2D vertical sections
	2593	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2594	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2595	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2596	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2597	' (zu(nzt))'
[226]	2598	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2599	ENDIF
	2600
	2601	!
	2602	!-- Upper plot limit for 3D arrays
	2603	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2604
	2605	!
	2606	!-- Determine and check accuracy for compressed 3D plot output
	2607	IF ( do3d_compress ) THEN
	2608	!
	2609	!-- Compression only permissible on T3E machines
	2610	IF ( host(1:3) /= 't3e' ) THEN
[215]	2611	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2612	TRIM( host ) // '"'
[226]	2613	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2614	ENDIF
	2615
	2616	i = 1
	2617	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2618
	2619	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2620	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2621	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2622	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2623	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2624	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2625	ENDIF
	2626
	2627	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2628	var = do3d_comp_prec(i)(1:ilen-1)
	2629
	2630	SELECT CASE ( var )
	2631
	2632	CASE ( 'u' )
	2633	j = 1
	2634	CASE ( 'v' )
	2635	j = 2
	2636	CASE ( 'w' )
	2637	j = 3
	2638	CASE ( 'p' )
	2639	j = 4
	2640	CASE ( 'pt' )
	2641	j = 5
	2642
	2643	CASE DEFAULT
[215]	2644	WRITE( message_string, * ) 'unknown variable "', &
	2645	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2646	i, ')'
[226]	2647	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2648
	2649	END SELECT
	2650
	2651	plot_3d_precision(j)%precision = prec
	2652	i = i + 1
	2653
	2654	ENDDO
	2655	ENDIF
	2656
	2657	!
	2658	!-- Check the data output format(s)
	2659	IF ( data_output_format(1) == ' ' ) THEN
	2660	!
	2661	!-- Default value
	2662	netcdf_output = .TRUE.
	2663	ELSE
	2664	i = 1
	2665	DO WHILE ( data_output_format(i) /= ' ' )
	2666
	2667	SELECT CASE ( data_output_format(i) )
	2668
	2669	CASE ( 'netcdf' )
	2670	netcdf_output = .TRUE.
	2671	CASE ( 'iso2d' )
	2672	iso2d_output = .TRUE.
	2673	CASE ( 'profil' )
	2674	profil_output = .TRUE.
	2675	CASE ( 'avs' )
	2676	avs_output = .TRUE.
	2677
	2678	CASE DEFAULT
[215]	2679	message_string = 'unknown value for data_output_format "' // &
	2680	TRIM( data_output_format(i) ) // '"'
[226]	2681	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2682
	2683	END SELECT
	2684
	2685	i = i + 1
	2686	IF ( i > 10 ) EXIT
	2687
	2688	ENDDO
	2689
	2690	ENDIF
	2691
	2692	!
[410]	2693	!-- Check mask conditions
[553]	2694	DO mid = 1, max_masks
[567]	2695	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	2696	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	2697	masks = masks + 1
	2698	ENDIF
	2699	ENDDO
	2700
[410]	2701	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2702	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2703	'<= ', max_masks, ' (=max_masks)'
[564]	2704	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	2705	ENDIF
	2706	IF ( masks > 0 ) THEN
	2707	mask_scale(1) = mask_scale_x
	2708	mask_scale(2) = mask_scale_y
	2709	mask_scale(3) = mask_scale_z
	2710	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2711	WRITE( message_string, * ) &
	2712	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2713	'must be > 0.0'
[564]	2714	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	2715	ENDIF
	2716	!
	2717	!-- Generate masks for masked data output
	2718	CALL init_masks
	2719	ENDIF
	2720
	2721	!
[493]	2722	!-- Check the NetCDF data format
	2723	IF ( netcdf_data_format > 2 ) THEN
	2724	#if defined( __netcdf4 )
	2725	CONTINUE
	2726	#else
	2727	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
	2728	'cpp-directive __netcdf4 given & switch ' // &
	2729	'back to 64-bit offset format'
	2730	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	2731	netcdf_data_format = 2
	2732	#endif
	2733	ENDIF
	2734
	2735	!
[1]	2736	!-- Check netcdf precison
	2737	ldum = .FALSE.
	2738	CALL define_netcdf_header( 'ch', ldum, 0 )
	2739
	2740	!
	2741	!-- Check, whether a constant diffusion coefficient shall be used
	2742	IF ( km_constant /= -1.0 ) THEN
	2743	IF ( km_constant < 0.0 ) THEN
[215]	2744	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2745	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2746	ELSE
	2747	IF ( prandtl_number < 0.0 ) THEN
[215]	2748	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2749	' < 0.0'
[226]	2750	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2751	ENDIF
	2752	constant_diffusion = .TRUE.
	2753
	2754	IF ( prandtl_layer ) THEN
[215]	2755	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2756	'value of km'
[226]	2757	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2758	ENDIF
	2759	ENDIF
	2760	ENDIF
	2761
	2762	!
	2763	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2764	!-- for the horizontal diffusivity used within the outflow damping layer,
	2765	!-- and check/set the width of the damping layer
	2766	IF ( bc_lr /= 'cyclic' ) THEN
	2767	IF ( km_damp_max == -1.0 ) THEN
	2768	km_damp_max = 0.5 * dx
	2769	ENDIF
	2770	IF ( outflow_damping_width == -1.0 ) THEN
	2771	outflow_damping_width = MIN( 20, nx/2 )
	2772	ENDIF
	2773	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2774	message_string = 'outflow_damping width out of range'
[226]	2775	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2776	ENDIF
	2777	ENDIF
	2778
	2779	IF ( bc_ns /= 'cyclic' ) THEN
	2780	IF ( km_damp_max == -1.0 ) THEN
	2781	km_damp_max = 0.5 * dy
	2782	ENDIF
	2783	IF ( outflow_damping_width == -1.0 ) THEN
	2784	outflow_damping_width = MIN( 20, ny/2 )
	2785	ENDIF
	2786	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2787	message_string = 'outflow_damping width out of range'
[226]	2788	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2789	ENDIF
	2790	ENDIF
	2791
	2792	!
	2793	!-- Check value range for rif
	2794	IF ( rif_min >= rif_max ) THEN
[215]	2795	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2796	'than rif_max = ', rif_max
[226]	2797	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2798	ENDIF
	2799
	2800	!
	2801	!-- Determine upper and lower hight level indices for random perturbations
[97]	2802	IF ( disturbance_level_b == -9999999.9 ) THEN
	2803	IF ( ocean ) THEN
	2804	disturbance_level_b = zu((nzt*2)/3)
	2805	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2806	ELSE
	2807	disturbance_level_b = zu(nzb+3)
	2808	disturbance_level_ind_b = nzb + 3
	2809	ENDIF
[1]	2810	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2811	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2812	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2813	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2814	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2815	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2816	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2817	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2818	ELSE
	2819	DO k = 3, nzt-2
	2820	IF ( disturbance_level_b <= zu(k) ) THEN
	2821	disturbance_level_ind_b = k
	2822	EXIT
	2823	ENDIF
	2824	ENDDO
	2825	ENDIF
	2826
[97]	2827	IF ( disturbance_level_t == -9999999.9 ) THEN
	2828	IF ( ocean ) THEN
	2829	disturbance_level_t = zu(nzt-3)
	2830	disturbance_level_ind_t = nzt - 3
	2831	ELSE
	2832	disturbance_level_t = zu(nzt/3)
	2833	disturbance_level_ind_t = nzt / 3
	2834	ENDIF
[1]	2835	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2836	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2837	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2838	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2839	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2840	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2841	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2842	disturbance_level_b
[226]	2843	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2844	ELSE
	2845	DO k = 3, nzt-2
	2846	IF ( disturbance_level_t <= zu(k) ) THEN
	2847	disturbance_level_ind_t = k
	2848	EXIT
	2849	ENDIF
	2850	ENDDO
	2851	ENDIF
	2852
	2853	!
	2854	!-- Check again whether the levels determined this way are ok.
	2855	!-- Error may occur at automatic determination and too few grid points in
	2856	!-- z-direction.
	2857	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2858	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2859	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2860	disturbance_level_b
[226]	2861	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2862	ENDIF
	2863
	2864	!
	2865	!-- Determine the horizontal index range for random perturbations.
	2866	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2867	!-- near the inflow and the perturbation area is further limited to ...(1)
	2868	!-- after the initial phase of the flow.
	2869	dist_nxl = 0; dist_nxr = nx
	2870	dist_nys = 0; dist_nyn = ny
	2871	IF ( bc_lr /= 'cyclic' ) THEN
	2872	IF ( inflow_disturbance_begin == -1 ) THEN
	2873	inflow_disturbance_begin = MIN( 10, nx/2 )
	2874	ENDIF
	2875	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2876	THEN
[215]	2877	message_string = 'inflow_disturbance_begin out of range'
[226]	2878	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2879	ENDIF
	2880	IF ( inflow_disturbance_end == -1 ) THEN
	2881	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2882	ENDIF
	2883	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2884	THEN
[215]	2885	message_string = 'inflow_disturbance_end out of range'
[226]	2886	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2887	ENDIF
	2888	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2889	IF ( inflow_disturbance_begin == -1 ) THEN
	2890	inflow_disturbance_begin = MIN( 10, ny/2 )
	2891	ENDIF
	2892	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2893	THEN
[215]	2894	message_string = 'inflow_disturbance_begin out of range'
[226]	2895	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2896	ENDIF
	2897	IF ( inflow_disturbance_end == -1 ) THEN
	2898	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2899	ENDIF
	2900	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2901	THEN
[215]	2902	message_string = 'inflow_disturbance_end out of range'
[226]	2903	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2904	ENDIF
	2905	ENDIF
	2906
[73]	2907	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2908	dist_nxr = nx - inflow_disturbance_begin
	2909	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2910	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2911	dist_nxl = inflow_disturbance_begin
	2912	dist_nxr(1) = inflow_disturbance_end
[73]	2913	ENDIF
	2914	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2915	dist_nyn = ny - inflow_disturbance_begin
	2916	dist_nys(1) = ny - inflow_disturbance_end
[73]	2917	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2918	dist_nys = inflow_disturbance_begin
	2919	dist_nyn(1) = inflow_disturbance_end
	2920	ENDIF
	2921
	2922	!
[151]	2923	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2924	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2925	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2926	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2927	'condition at the inflow boundary'
[226]	2928	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2929	ENDIF
	2930
	2931	!
	2932	!-- In case of turbulent inflow calculate the index of the recycling plane
	2933	IF ( turbulent_inflow ) THEN
	2934	IF ( recycling_width == 9999999.9 ) THEN
	2935	!
	2936	!-- Set the default value for the width of the recycling domain
	2937	recycling_width = 0.1 * nx * dx
	2938	ELSE
	2939	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2940	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2941	' ', recycling_width
[226]	2942	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	2943	ENDIF
	2944	ENDIF
	2945	!
	2946	!-- Calculate the index
	2947	recycling_plane = recycling_width / dx
	2948	ENDIF
	2949
	2950	!
[1]	2951	!-- Check random generator
	2952	IF ( random_generator /= 'system-specific' .AND. &
	2953	random_generator /= 'numerical-recipes' ) THEN
[215]	2954	message_string = 'unknown random generator: random_generator = "' // &
	2955	TRIM( random_generator ) // '"'
[226]	2956	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2957	ENDIF
	2958
	2959	!
	2960	!-- Determine damping level index for 1D model
	2961	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2962	IF ( damp_level_1d == -1.0 ) THEN
	2963	damp_level_1d = zu(nzt+1)
	2964	damp_level_ind_1d = nzt + 1
	2965	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2966	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2967	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	2968	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	2969	ELSE
	2970	DO k = 1, nzt+1
	2971	IF ( damp_level_1d <= zu(k) ) THEN
	2972	damp_level_ind_1d = k
	2973	EXIT
	2974	ENDIF
	2975	ENDDO
	2976	ENDIF
	2977	ENDIF
[215]	2978
[1]	2979	!
	2980	!-- Check some other 1d-model parameters
	2981	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2982	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2983	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2984	'" is unknown'
[226]	2985	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2986	ENDIF
	2987	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2988	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2989	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2990	'" is unknown'
[226]	2991	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2992	ENDIF
	2993
	2994	!
	2995	!-- Set time for the next user defined restart (time_restart is the
	2996	!-- internal parameter for steering restart events)
	2997	IF ( restart_time /= 9999999.9 ) THEN
[291]	2998	IF ( restart_time > time_since_reference_point ) THEN
	2999	time_restart = restart_time
	3000	ENDIF
[1]	3001	ELSE
	3002	!
	3003	!-- In case of a restart run, set internal parameter to default (no restart)
	3004	!-- if the NAMELIST-parameter restart_time is omitted
	3005	time_restart = 9999999.9
	3006	ENDIF
	3007
	3008	!
	3009	!-- Set default value of the time needed to terminate a model run
	3010	IF ( termination_time_needed == -1.0 ) THEN
	3011	IF ( host(1:3) == 'ibm' ) THEN
	3012	termination_time_needed = 300.0
	3013	ELSE
	3014	termination_time_needed = 35.0
	3015	ENDIF
	3016	ENDIF
	3017
	3018	!
	3019	!-- Check the time needed to terminate a model run
	3020	IF ( host(1:3) == 't3e' ) THEN
	3021	!
	3022	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3023	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3024	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3025	WRITE( message_string, * ) 'termination_time_needed = ', &
	3026	termination_time_needed, ' must be > 30.0 on host "', &
	3027	TRIM( host ), '"'
[226]	3028	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3029	ENDIF
	3030	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3031	!
	3032	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3033	!-- because the job time consumed before executing palm (for compiling,
	3034	!-- copying of files, etc.) has to be regarded
	3035	IF ( termination_time_needed < 300.0 ) THEN
[215]	3036	WRITE( message_string, * ) 'termination_time_needed = ', &
	3037	termination_time_needed, ' should be >= 300.0 on host "', &
	3038	TRIM( host ), '"'
[226]	3039	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3040	ENDIF
	3041	ENDIF
	3042
[217]	3043	!
[240]	3044	!-- Check pressure gradient conditions
	3045	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3046	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3047	'w are .TRUE. but one of them must be .FALSE.'
[240]	3048	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3049	ENDIF
	3050	IF ( dp_external ) THEN
	3051	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3052	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3053	' of range'
	3054	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3055	ENDIF
	3056	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3057	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3058	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3059	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3060	ENDIF
	3061	ENDIF
	3062	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3063	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3064	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3065	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3066	ENDIF
[241]	3067	IF ( conserve_volume_flow ) THEN
	3068	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
	3069	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	3070	conserve_volume_flow_mode = 'inflow_profile'
	3071	ELSE
	3072	conserve_volume_flow_mode = 'initial_profiles'
	3073	ENDIF
	3074	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3075	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3076	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3077	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3078	conserve_volume_flow_mode
	3079	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3080	ENDIF
	3081	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
	3082	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
	3083	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
	3084	'require & conserve_volume_flow_mode = ''inflow_profile'''
	3085	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3086	ENDIF
	3087	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3088	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3089	WRITE( message_string, * ) 'cyclic boundary conditions ', &
	3090	'require & conserve_volume_flow_mode = ''initial_profiles''', &
	3091	' or ''bulk_velocity'''
	3092	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3093	ENDIF
	3094	ENDIF
	3095	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3096	( .NOT. conserve_volume_flow .OR. &
	3097	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3098	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
	3099	'conserve_volume_flow = .T. and & ', &
	3100	'conserve_volume_flow_mode = ''bulk_velocity'''
	3101	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3102	ENDIF
[240]	3103
	3104	!
[264]	3105	!-- Check particle attributes
	3106	IF ( particle_color /= 'none' ) THEN
	3107	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3108	particle_color /= 'z' ) THEN
	3109	message_string = 'illegal value for parameter particle_color: ' // &
	3110	TRIM( particle_color)
	3111	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3112	ELSE
	3113	IF ( color_interval(2) <= color_interval(1) ) THEN
	3114	message_string = 'color_interval(2) <= color_interval(1)'
	3115	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3116	ENDIF
	3117	ENDIF
	3118	ENDIF
	3119
	3120	IF ( particle_dvrpsize /= 'none' ) THEN
	3121	IF ( particle_dvrpsize /= 'absw' ) THEN
	3122	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3123	' ' // TRIM( particle_color)
	3124	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3125	ELSE
	3126	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3127	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3128	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3129	ENDIF
	3130	ENDIF
	3131	ENDIF
	3132
	3133	!
[217]	3134	!-- Check &userpar parameters
	3135	CALL user_check_parameters
[1]	3136
[217]	3137
[1]	3138	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |