Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 486

Last change on this file since 486 was 484, checked in by raasch, 15 years ago
typo in file headers removed
Property svn:keywords set to `Id`
File size: 121.3 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[449]	6	!
[392]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: check_parameters.f90 484 2010-02-05 07:36:54Z raasch $
	11	!
[449]	12	! 411 2009-12-11 14:15:58Z heinze
	13	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	14	! Initialization of large scale vertical motion (subsidence/ascent)
	15	!
	16	! 410 2009-12-04 17:05:40Z letzel
	17	! masked data output
	18	!
[392]	19	! 388 2009-09-23 09:40:33Z raasch
[388]	20	! Check profiles fpr prho and hyp.
[376]	21	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	22	! interval has been set, respective error message is included
[366]	23	! bc_lr_cyc and bc_ns_cyc are set,
[328]	24	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	25	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	26	! Coupling with independent precursor runs.
[264]	27	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	28	! Bugfix: pressure included for profile output
[240]	29	! Check pressure gradient conditions
[256]	30	! topography_grid_convention moved from user_check_parameters
	31	! 'single_street_canyon'
[367]	32	! Added shf* and qsws* to the list of available output data
[226]	33	!
	34	! 222 2009-01-12 16:04:16Z letzel
[217]	35	! +user_check_parameters
[213]	36	! Output of messages replaced by message handling routine.
[206]	37	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	38	! deleted __mpi2 directives
[222]	39	! Check that PALM is called with mrun -K parallel for coupling
[198]	40	!
	41	! 197 2008-09-16 15:29:03Z raasch
[177]	42	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	43	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	44	!
	45	! Strict grid matching along z is not needed for mg-solver.
[153]	46	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	47	! Case of reading data for recycling included in initializing_actions,
[197]	48	! check of turbulent_inflow and calculation of recycling_plane.
	49	! q*2 profile added
[139]	50	!
	51	! 138 2007-11-28 10:03:58Z letzel
[138]	52	! Plant canopy added
[132]	53	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	54	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	55	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	56	!
	57	! 109 2007-08-28 15:26:47Z letzel
[102]	58	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	59	! conditions for temperature and fluxes) in case of coupled runs.
	60	! +profiles for wp and w"e
[104]	61	! Bugfix: Error message concerning output of particle concentration (pc)
	62	! modified
[108]	63	! More checks and more default values for coupled runs
	64	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	65	! cloud_physics = .T.)
	66	! Rayleigh damping for ocean fixed.
[109]	67	! Check and, if necessary, set default value for dt_coupling
[98]	68	!
	69	! 97 2007-06-21 08:23:15Z raasch
[97]	70	! Initial salinity profile is calculated, salinity boundary conditions are
	71	! checked,
[94]	72	! z_max_do1d is checked only in case of ocean = .f.,
[97]	73	! +initial temperature and geostrophic velocity profiles for the ocean version,
	74	! use_pt_reference renamed use_reference
[77]	75	!
[90]	76	! 89 2007-05-25 12:08:31Z raasch
	77	! Check for user-defined profiles
	78	!
[77]	79	! 75 2007-03-22 09:54:05Z raasch
[51]	80	! "by_user" allowed as initializing action, -data_output_ts,
[63]	81	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	82	! and pt_reference are checked, moisture renamed humidity,
[72]	83	! output of precipitation amount/rate and roughnes length + check
[73]	84	! possible negative humidities are avoided in initial profile,
[75]	85	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	86	! revision added to run_description_header
[1]	87	!
[39]	88	! 20 2007-02-26 00:12:32Z raasch
	89	! Temperature and humidity gradients at top are now calculated for nzt+1,
	90	! top_heatflux and respective boundary condition bc_pt_t is checked
	91	!
[3]	92	! RCS Log replace by Id keyword, revision history cleaned up
	93	!
[1]	94	! Revision 1.61 2006/08/04 14:20:25 raasch
	95	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	96	! use_upstream_for_tke, default value for dt_dopts,
	97	! generation of file header moved from routines palm and header to here
	98	!
	99	! Revision 1.1 1997/08/26 06:29:23 raasch
	100	! Initial revision
	101	!
	102	!
	103	! Description:
	104	! ------------
	105	! Check control parameters and deduce further quantities.
	106	!------------------------------------------------------------------------------!
	107
	108	USE arrays_3d
	109	USE constants
	110	USE control_parameters
[264]	111	USE dvrp_variables
[1]	112	USE grid_variables
	113	USE indices
	114	USE model_1d
	115	USE netcdf_control
	116	USE particle_attributes
	117	USE pegrid
	118	USE profil_parameter
[411]	119	USE subsidence_mod
[1]	120	USE statistics
	121	USE transpose_indices
	122
	123	IMPLICIT NONE
	124
	125	CHARACTER (LEN=1) :: sq
	126	CHARACTER (LEN=6) :: var
	127	CHARACTER (LEN=7) :: unit
	128	CHARACTER (LEN=8) :: date
	129	CHARACTER (LEN=10) :: time
[102]	130	CHARACTER (LEN=40) :: coupling_string
[1]	131	CHARACTER (LEN=100) :: action
	132
[108]	133	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	134	position, prec
[1]	135	LOGICAL :: found, ldum
[291]	136	REAL :: gradient, maxn, maxp, remote = 0.0, &
	137	simulation_time_since_reference
[1]	138
	139	!
	140	!-- Warning, if host is not set
	141	IF ( host(1:1) == ' ' ) THEN
[213]	142	message_string = '"host" is not set. Please check that environment ' // &
	143	'variable "localhost" & is set before running PALM'
[226]	144	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	145	ENDIF
	146
	147	!
[102]	148	!-- Check the coupling mode
	149	IF ( coupling_mode /= 'uncoupled' .AND. &
	150	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	151	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	152	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	153	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	154	ENDIF
	155
	156	!
[108]	157	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	158	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	159
[108]	160	IF ( dt_coupling == 9999999.9 ) THEN
[213]	161	message_string = 'dt_coupling is not set but required for coup' // &
	162	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	163	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	164	ENDIF
[213]	165
[206]	166	#if defined( __parallel )
	167	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	168	ierr )
	169	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	170	status, ierr )
[108]	171	IF ( dt_coupling /= remote ) THEN
[213]	172	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	173	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	174	'dt_coupling_remote = ', remote
[226]	175	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	176	ENDIF
[109]	177	IF ( dt_coupling <= 0.0 ) THEN
[206]	178	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	179	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	180	status, ierr )
[109]	181	dt_coupling = MAX( dt_max, remote )
[213]	182	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	183	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	184	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	185	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	186	ENDIF
[213]	187
[206]	188	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	189	ierr )
	190	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	191	status, ierr )
[108]	192	IF ( restart_time /= remote ) THEN
[213]	193	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	194	'": restart_time = ', restart_time, '& is not equal to ', &
	195	'restart_time_remote = ', remote
[226]	196	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	197	ENDIF
[213]	198
[206]	199	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	200	ierr )
	201	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	202	status, ierr )
[108]	203	IF ( dt_restart /= remote ) THEN
[213]	204	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	205	'": dt_restart = ', dt_restart, '& is not equal to ', &
	206	'dt_restart_remote = ', remote
[226]	207	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	208	ENDIF
[213]	209
[291]	210	simulation_time_since_reference = end_time - coupling_start_time
	211	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	212	14, comm_inter, ierr )
[206]	213	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	214	status, ierr )
[291]	215	IF ( simulation_time_since_reference /= remote ) THEN
[213]	216	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	217	'": simulation_time_since_reference = ', &
	218	simulation_time_since_reference, '& is not equal to ', &
	219	'simulation_time_since_reference_remote = ', remote
[226]	220	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	221	ENDIF
[213]	222
[206]	223	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	224	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	225	status, ierr )
[108]	226	IF ( dx /= remote ) THEN
[213]	227	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	228	'": dx = ', dx, '& is not equal to dx_remote = ', remote
[226]	229	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
[108]	230	ENDIF
[213]	231
[206]	232	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	233	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	234	status, ierr )
[108]	235	IF ( dy /= remote ) THEN
[213]	236	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	237	'": dy = ', dy, '& is not equal to dy_remote = ', remote
[226]	238	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
[108]	239	ENDIF
[213]	240
[206]	241	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	242	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	243	status, ierr )
[108]	244	IF ( nx /= iremote ) THEN
[213]	245	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	246	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
[226]	247	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
[108]	248	ENDIF
[213]	249
[206]	250	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	251	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	252	status, ierr )
[108]	253	IF ( ny /= iremote ) THEN
[213]	254	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	255	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
[226]	256	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
[108]	257	ENDIF
[222]	258	#else
	259	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	260	' ''mrun -K parallel'''
[226]	261	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	262	#endif
	263	ENDIF
	264
[206]	265	#if defined( __parallel )
[108]	266	!
	267	!-- Exchange via intercommunicator
	268	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	269	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	270	ierr )
[108]	271	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	272	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	273	comm_inter, status, ierr )
[108]	274	ENDIF
	275	#endif
	276
	277
	278	!
[1]	279	!-- Generate the file header which is used as a header for most of PALM's
	280	!-- output files
	281	CALL DATE_AND_TIME( date, time )
	282	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	283	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	284	IF ( coupling_mode == 'uncoupled' ) THEN
	285	coupling_string = ''
	286	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	287	coupling_string = ' coupled (atmosphere)'
	288	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	289	coupling_string = ' coupled (ocean)'
	290	ENDIF
[1]	291
[102]	292	WRITE ( run_description_header, &
	293	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	294	TRIM( version ), TRIM( revision ), 'run: ', &
	295	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	296	'host: ', TRIM( host ), run_date, run_time
[1]	297
	298	!
[63]	299	!-- Check the general loop optimization method
	300	IF ( loop_optimization == 'default' ) THEN
	301	IF ( host(1:3) == 'nec' ) THEN
	302	loop_optimization = 'vector'
	303	ELSE
	304	loop_optimization = 'cache'
	305	ENDIF
	306	ENDIF
	307	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	308	.AND. loop_optimization /= 'vector' ) THEN
[213]	309	message_string = 'illegal value given for loop_optimization: "' // &
	310	TRIM( loop_optimization ) // '"'
[226]	311	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	312	ENDIF
	313
	314	!
[1]	315	!-- Check topography setting (check for illegal parameter combinations)
	316	IF ( topography /= 'flat' ) THEN
	317	action = ' '
	318	IF ( scalar_advec /= 'pw-scheme' ) THEN
	319	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	320	ENDIF
	321	IF ( momentum_advec /= 'pw-scheme' ) THEN
	322	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	323	ENDIF
[51]	324	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	325	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	326	ENDIF
[114]	327	IF ( psolver == 'sor' ) THEN
[1]	328	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	329	ENDIF
	330	IF ( sloping_surface ) THEN
	331	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	332	ENDIF
	333	IF ( galilei_transformation ) THEN
	334	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	335	ENDIF
	336	IF ( cloud_physics ) THEN
	337	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	338	ENDIF
	339	IF ( cloud_droplets ) THEN
	340	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	341	ENDIF
	342	IF ( .NOT. prandtl_layer ) THEN
	343	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	344	ENDIF
	345	IF ( action /= ' ' ) THEN
[213]	346	message_string = 'a non-flat topography does not allow ' // &
	347	TRIM( action )
[226]	348	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	349	ENDIF
[256]	350	!
	351	!-- In case of non-flat topography, check whether the convention how to
	352	!-- define the topography grid has been set correctly, or whether the default
	353	!-- is applicable. If this is not possible, abort.
	354	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	355	IF ( TRIM( topography ) /= 'single_building' .AND. &
	356	TRIM( topography ) /= 'single_street_canyon' .AND. &
	357	TRIM( topography ) /= 'read_from_file' ) THEN
	358	!-- The default value is not applicable here, because it is only valid
	359	!-- for the two standard cases 'single_building' and 'read_from_file'
	360	!-- defined in init_grid.
	361	WRITE( message_string, * ) &
	362	'The value for "topography_grid_convention" ', &
	363	'is not set. Its default value is & only valid for ', &
	364	'"topography" = ''single_building'', ', &
	365	'''single_street_canyon'' & or ''read_from_file''.', &
	366	' & Choose ''cell_edge'' or ''cell_center''.'
	367	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	368	ELSE
	369	!-- The default value is applicable here.
	370	!-- Set convention according to topography.
	371	IF ( TRIM( topography ) == 'single_building' .OR. &
	372	TRIM( topography ) == 'single_street_canyon' ) THEN
	373	topography_grid_convention = 'cell_edge'
	374	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	375	topography_grid_convention = 'cell_center'
	376	ENDIF
	377	ENDIF
	378	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	379	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	380	WRITE( message_string, * ) &
	381	'The value for "topography_grid_convention" is ', &
	382	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	383	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	384	ENDIF
	385
[1]	386	ENDIF
[94]	387
[1]	388	!
[94]	389	!-- Check ocean setting
	390	IF ( ocean ) THEN
[332]	391
[94]	392	action = ' '
	393	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	394	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	395	ENDIF
[97]	396	IF ( momentum_advec == 'ups-scheme' ) THEN
	397	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	398	ENDIF
[94]	399	IF ( action /= ' ' ) THEN
[213]	400	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	401	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	402	ENDIF
	403
[332]	404	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	405	TRIM( coupling_char ) == '_O' ) THEN
[343]	406
[94]	407	!
[332]	408	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	409	!-- ocean run (this setting is done via mrun-option -y)
[343]	410
[291]	411	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	412	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	413	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	414
[291]	415	ENDIF
	416
	417	!
[1]	418	!-- Check whether there are any illegal values
	419	!-- Pressure solver:
	420	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	421	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	422	message_string = 'unknown solver for perturbation pressure: psolver' // &
	423	' = "' // TRIM( psolver ) // '"'
[226]	424	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	425	ENDIF
	426
	427	#if defined( __parallel )
	428	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	429	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	430	'for a 1d domain-decomposition along x & please do' // &
	431	' not set npey/=1 in the parameter file'
[226]	432	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	433	ENDIF
[181]	434	IF ( psolver == 'poisfft_hybrid' .AND. &
	435	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	436	psolver == 'multigrid' .AND. &
	437	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	438	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	439	'work for subdomains with unequal size & please ' // &
	440	'set grid_matching = ''strict'' in the parameter file'
[226]	441	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	442	ENDIF
	443	#else
	444	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	445	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	446	' for a parallel environment'
[226]	447	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	448	ENDIF
	449	#endif
	450
	451	IF ( psolver == 'multigrid' ) THEN
	452	IF ( cycle_mg == 'w' ) THEN
	453	gamma_mg = 2
	454	ELSEIF ( cycle_mg == 'v' ) THEN
	455	gamma_mg = 1
	456	ELSE
[213]	457	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	458	TRIM( cycle_mg ) // '"'
[226]	459	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	460	ENDIF
	461	ENDIF
	462
	463	IF ( fft_method /= 'singleton-algorithm' .AND. &
	464	fft_method /= 'temperton-algorithm' .AND. &
	465	fft_method /= 'system-specific' ) THEN
[213]	466	message_string = 'unknown fft-algorithm: fft_method = "' // &
	467	TRIM( fft_method ) // '"'
[226]	468	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	469	ENDIF
	470
	471	!
	472	!-- Advection schemes:
	473	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	474	THEN
[214]	475	message_string = 'unknown advection scheme: momentum_advec = "' // &
	476	TRIM( momentum_advec ) // '"'
[226]	477	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	478	ENDIF
	479	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	480	.AND. timestep_scheme /= 'euler' ) THEN
[214]	481	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	482	'" is not allowed with timestep_scheme = "' // &
	483	TRIM( timestep_scheme ) // '"'
[226]	484	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	485	ENDIF
	486
	487	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	488	scalar_advec /= 'ups-scheme' ) THEN
[214]	489	message_string = 'unknown advection scheme: scalar_advec = "' // &
	490	TRIM( scalar_advec ) // '"'
[226]	491	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	492	ENDIF
	493
	494	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	495	use_upstream_for_tke = .TRUE.
[214]	496	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	497	'use_sgs_for_particles = .TRUE.'
[226]	498	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	499	ENDIF
	500
	501	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	502	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	503	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	504	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	505	ENDIF
	506
	507	!
	508	!-- Timestep schemes:
	509	SELECT CASE ( TRIM( timestep_scheme ) )
	510
	511	CASE ( 'euler' )
	512	intermediate_timestep_count_max = 1
	513	asselin_filter_factor = 0.0
	514
	515	CASE ( 'leapfrog', 'leapfrog+euler' )
	516	intermediate_timestep_count_max = 1
	517
	518	CASE ( 'runge-kutta-2' )
	519	intermediate_timestep_count_max = 2
	520	asselin_filter_factor = 0.0
	521
	522	CASE ( 'runge-kutta-3' )
	523	intermediate_timestep_count_max = 3
	524	asselin_filter_factor = 0.0
	525
	526	CASE DEFAULT
[214]	527	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	528	TRIM( timestep_scheme ) // '"'
[226]	529	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	530
	531	END SELECT
	532
[63]	533	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	534	THEN
[214]	535	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	536	'" & does not work with timestep_scheme "' // &
	537	TRIM( timestep_scheme ) // '"'
[226]	538	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	539	ENDIF
	540
	541	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	542	THEN
[214]	543	message_string = 'momentum advection scheme "' // &
	544	TRIM( momentum_advec ) // '" & does not work with ' // &
	545	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	546	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	547	ENDIF
	548
[147]	549	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	550	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	551	!
[214]	552	!-- No restart run: several initialising actions are possible
[1]	553	action = initializing_actions
	554	DO WHILE ( TRIM( action ) /= '' )
	555	position = INDEX( action, ' ' )
	556	SELECT CASE ( action(1:position-1) )
	557
	558	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	559	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	560	action = action(position+1:)
	561
	562	CASE DEFAULT
[214]	563	message_string = 'initializing_action = "' // &
	564	TRIM( action ) // '" unkown or not allowed'
[226]	565	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	566
	567	END SELECT
	568	ENDDO
	569	ENDIF
[214]	570
[1]	571	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	572	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	573	message_string = 'initializing_actions = "set_constant_profiles"' // &
	574	' and "set_1d-model_profiles" are not allowed ' // &
	575	'simultaneously'
[226]	576	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	577	ENDIF
[214]	578
[46]	579	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	580	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	581	message_string = 'initializing_actions = "set_constant_profiles"' // &
	582	' and "by_user" are not allowed simultaneously'
[226]	583	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	584	ENDIF
[214]	585
[46]	586	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	587	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	588	message_string = 'initializing_actions = "by_user" and ' // &
	589	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	590	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	591	ENDIF
[1]	592
[75]	593	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	594	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	595	'not allowed with humidity = ', humidity
[226]	596	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	597	ENDIF
	598
[72]	599	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	600	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	601	'not allowed with cloud_physics = ', cloud_physics
[226]	602	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	603	ENDIF
	604
[75]	605	IF ( humidity .AND. sloping_surface ) THEN
[214]	606	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	607	'are not allowed simultaneously'
[226]	608	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	609	ENDIF
	610
[75]	611	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	612	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	613	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	614	ENDIF
	615
[75]	616	IF ( passive_scalar .AND. humidity ) THEN
[214]	617	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	618	'is not allowed simultaneously'
[226]	619	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	620	ENDIF
	621
	622	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	623	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	624	' = .TRUE.'
[226]	625	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	626	ENDIF
	627
	628	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	629	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	630	'" found for parameter grid_matching'
[226]	631	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	632	ENDIF
	633
[138]	634	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	635	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	636	'coefficient & given value is drag_coefficient = 0.0'
[226]	637	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	638	ENDIF
	639
[1]	640	!
	641	!-- In case of no model continuation run, check initialising parameters and
	642	!-- deduce further quantities
	643	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	644
	645	!
	646	!-- Initial profiles for 1D and 3D model, respectively
	647	u_init = ug_surface
	648	v_init = vg_surface
	649	pt_init = pt_surface
[94]	650	IF ( humidity ) q_init = q_surface
	651	IF ( ocean ) sa_init = sa_surface
	652	IF ( passive_scalar ) q_init = s_surface
[138]	653	IF ( plant_canopy ) lad = 0.0
[1]	654
	655	!
	656	!--
	657	!-- If required, compute initial profile of the geostrophic wind
	658	!-- (component ug)
	659	i = 1
	660	gradient = 0.0
[97]	661
	662	IF ( .NOT. ocean ) THEN
	663
	664	ug_vertical_gradient_level_ind(1) = 0
	665	ug(0) = ug_surface
	666	DO k = 1, nzt+1
[177]	667	IF ( i < 11 ) THEN
	668	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	669	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	670	gradient = ug_vertical_gradient(i) / 100.0
	671	ug_vertical_gradient_level_ind(i) = k - 1
	672	i = i + 1
[1]	673	ENDIF
[177]	674	ENDIF
[97]	675	IF ( gradient /= 0.0 ) THEN
	676	IF ( k /= 1 ) THEN
	677	ug(k) = ug(k-1) + dzu(k) * gradient
	678	ELSE
	679	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	680	ENDIF
[1]	681	ELSE
[97]	682	ug(k) = ug(k-1)
[1]	683	ENDIF
[97]	684	ENDDO
[1]	685
[97]	686	ELSE
	687
	688	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	689	ug(nzt+1) = ug_surface
[97]	690	DO k = nzt, 0, -1
[177]	691	IF ( i < 11 ) THEN
	692	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	693	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	694	gradient = ug_vertical_gradient(i) / 100.0
	695	ug_vertical_gradient_level_ind(i) = k + 1
	696	i = i + 1
[97]	697	ENDIF
	698	ENDIF
	699	IF ( gradient /= 0.0 ) THEN
	700	IF ( k /= nzt ) THEN
	701	ug(k) = ug(k+1) - dzu(k+1) * gradient
	702	ELSE
	703	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	704	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	705	ENDIF
	706	ELSE
	707	ug(k) = ug(k+1)
	708	ENDIF
	709	ENDDO
	710
	711	ENDIF
	712
[1]	713	u_init = ug
	714
	715	!
	716	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	717	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	718	ug_vertical_gradient_level(1) = 0.0
	719	ENDIF
	720
	721	!
	722	!--
	723	!-- If required, compute initial profile of the geostrophic wind
	724	!-- (component vg)
	725	i = 1
	726	gradient = 0.0
[97]	727
	728	IF ( .NOT. ocean ) THEN
	729
	730	vg_vertical_gradient_level_ind(1) = 0
	731	vg(0) = vg_surface
	732	DO k = 1, nzt+1
[177]	733	IF ( i < 11 ) THEN
	734	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	735	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	736	gradient = vg_vertical_gradient(i) / 100.0
	737	vg_vertical_gradient_level_ind(i) = k - 1
	738	i = i + 1
[1]	739	ENDIF
	740	ENDIF
[97]	741	IF ( gradient /= 0.0 ) THEN
	742	IF ( k /= 1 ) THEN
	743	vg(k) = vg(k-1) + dzu(k) * gradient
	744	ELSE
	745	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	746	ENDIF
[1]	747	ELSE
[97]	748	vg(k) = vg(k-1)
[1]	749	ENDIF
[97]	750	ENDDO
[1]	751
[97]	752	ELSE
	753
[121]	754	vg_vertical_gradient_level_ind(1) = nzt+1
	755	vg(nzt+1) = vg_surface
[97]	756	DO k = nzt, 0, -1
[177]	757	IF ( i < 11 ) THEN
	758	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	759	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	760	gradient = vg_vertical_gradient(i) / 100.0
	761	vg_vertical_gradient_level_ind(i) = k + 1
	762	i = i + 1
[97]	763	ENDIF
	764	ENDIF
	765	IF ( gradient /= 0.0 ) THEN
	766	IF ( k /= nzt ) THEN
	767	vg(k) = vg(k+1) - dzu(k+1) * gradient
	768	ELSE
	769	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	770	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	771	ENDIF
	772	ELSE
	773	vg(k) = vg(k+1)
	774	ENDIF
	775	ENDDO
	776
	777	ENDIF
	778
[1]	779	v_init = vg
	780
	781	!
	782	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	783	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	784	vg_vertical_gradient_level(1) = 0.0
	785	ENDIF
	786
	787	!
[94]	788	!-- Compute initial temperature profile using the given temperature gradients
[1]	789	i = 1
	790	gradient = 0.0
[94]	791
	792	IF ( .NOT. ocean ) THEN
	793
	794	pt_vertical_gradient_level_ind(1) = 0
	795	DO k = 1, nzt+1
[177]	796	IF ( i < 11 ) THEN
	797	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	798	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	799	gradient = pt_vertical_gradient(i) / 100.0
	800	pt_vertical_gradient_level_ind(i) = k - 1
	801	i = i + 1
[1]	802	ENDIF
	803	ENDIF
[94]	804	IF ( gradient /= 0.0 ) THEN
	805	IF ( k /= 1 ) THEN
	806	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	807	ELSE
	808	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	809	ENDIF
[1]	810	ELSE
[94]	811	pt_init(k) = pt_init(k-1)
[1]	812	ENDIF
[94]	813	ENDDO
[1]	814
[94]	815	ELSE
	816
	817	pt_vertical_gradient_level_ind(1) = nzt+1
	818	DO k = nzt, 0, -1
[177]	819	IF ( i < 11 ) THEN
	820	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	821	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	822	gradient = pt_vertical_gradient(i) / 100.0
	823	pt_vertical_gradient_level_ind(i) = k + 1
	824	i = i + 1
[94]	825	ENDIF
	826	ENDIF
	827	IF ( gradient /= 0.0 ) THEN
	828	IF ( k /= nzt ) THEN
	829	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	830	ELSE
	831	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	832	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	833	ENDIF
	834	ELSE
	835	pt_init(k) = pt_init(k+1)
	836	ENDIF
	837	ENDDO
	838
	839	ENDIF
	840
[1]	841	!
	842	!-- In case of no given temperature gradients, choose gradient of neutral
	843	!-- stratification
[94]	844	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	845	pt_vertical_gradient_level(1) = 0.0
	846	ENDIF
	847
	848	!
[94]	849	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	850	!-- boundary condition
[19]	851	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	852
	853	!
	854	!-- If required, compute initial humidity or scalar profile using the given
	855	!-- humidity/scalar gradient. In case of scalar transport, initially store
	856	!-- values of the scalar parameters on humidity parameters
	857	IF ( passive_scalar ) THEN
	858	bc_q_b = bc_s_b
	859	bc_q_t = bc_s_t
	860	q_surface = s_surface
	861	q_surface_initial_change = s_surface_initial_change
	862	q_vertical_gradient = s_vertical_gradient
	863	q_vertical_gradient_level = s_vertical_gradient_level
	864	surface_waterflux = surface_scalarflux
[407]	865	wall_humidityflux = wall_scalarflux
[1]	866	ENDIF
	867
[75]	868	IF ( humidity .OR. passive_scalar ) THEN
[1]	869
	870	i = 1
	871	gradient = 0.0
	872	q_vertical_gradient_level_ind(1) = 0
	873	DO k = 1, nzt+1
[177]	874	IF ( i < 11 ) THEN
	875	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	876	q_vertical_gradient_level(i) >= 0.0 ) THEN
	877	gradient = q_vertical_gradient(i) / 100.0
	878	q_vertical_gradient_level_ind(i) = k - 1
	879	i = i + 1
[1]	880	ENDIF
	881	ENDIF
	882	IF ( gradient /= 0.0 ) THEN
	883	IF ( k /= 1 ) THEN
	884	q_init(k) = q_init(k-1) + dzu(k) * gradient
	885	ELSE
	886	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	887	ENDIF
	888	ELSE
	889	q_init(k) = q_init(k-1)
	890	ENDIF
[72]	891	!
	892	!-- Avoid negative humidities
	893	IF ( q_init(k) < 0.0 ) THEN
	894	q_init(k) = 0.0
	895	ENDIF
[1]	896	ENDDO
	897
	898	!
	899	!-- In case of no given humidity gradients, choose zero gradient
	900	!-- conditions
	901	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	902	q_vertical_gradient_level(1) = 0.0
	903	ENDIF
	904
	905	!
	906	!-- Store humidity gradient at the top boundary for possile Neumann
	907	!-- boundary condition
[19]	908	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	909
	910	ENDIF
	911
[94]	912	!
	913	!-- If required, compute initial salinity profile using the given salinity
	914	!-- gradients
	915	IF ( ocean ) THEN
	916
	917	i = 1
	918	gradient = 0.0
	919
	920	sa_vertical_gradient_level_ind(1) = nzt+1
	921	DO k = nzt, 0, -1
[177]	922	IF ( i < 11 ) THEN
	923	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	924	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	925	gradient = sa_vertical_gradient(i) / 100.0
	926	sa_vertical_gradient_level_ind(i) = k + 1
	927	i = i + 1
[94]	928	ENDIF
	929	ENDIF
	930	IF ( gradient /= 0.0 ) THEN
	931	IF ( k /= nzt ) THEN
	932	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	933	ELSE
	934	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	935	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	936	ENDIF
	937	ELSE
	938	sa_init(k) = sa_init(k+1)
	939	ENDIF
	940	ENDDO
	941
	942	ENDIF
	943
[138]	944	!
[388]	945	!-- If required compute the profile of leaf area density used in the plant
	946	!-- canopy model
[138]	947	IF ( plant_canopy ) THEN
	948
	949	i = 1
	950	gradient = 0.0
[1]	951
[138]	952	IF ( .NOT. ocean ) THEN
[153]	953
	954	lad(0) = lad_surface
[138]	955
	956	lad_vertical_gradient_level_ind(1) = 0
	957	DO k = 1, pch_index
[177]	958	IF ( i < 11 ) THEN
	959	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	960	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	961	gradient = lad_vertical_gradient(i)
	962	lad_vertical_gradient_level_ind(i) = k - 1
	963	i = i + 1
[138]	964	ENDIF
	965	ENDIF
	966	IF ( gradient /= 0.0 ) THEN
	967	IF ( k /= 1 ) THEN
	968	lad(k) = lad(k-1) + dzu(k) * gradient
	969	ELSE
	970	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	971	ENDIF
	972	ELSE
	973	lad(k) = lad(k-1)
	974	ENDIF
	975	ENDDO
	976
	977	ENDIF
	978
[1]	979	!
[388]	980	!-- In case of no given leaf area density gradients, choose a vanishing
	981	!-- gradient
[138]	982	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	983	lad_vertical_gradient_level(1) = 0.0
	984	ENDIF
	985
	986	ENDIF
	987
	988	ENDIF
[411]	989
	990	!
	991	!-- Initialize large scale subsidence if required
	992	IF ( ws_vertical_gradient_level(1) /= -9999999.9 ) THEN
	993	large_scale_subsidence = .TRUE.
	994	CALL init_w_subsidence
	995	END IF
	996
[138]	997
	998	!
[1]	999	!-- Compute Coriolis parameter
	1000	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1001	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1002
	1003	!
[97]	1004	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1005	!-- set the reference temperature equal to the surface temperature.
	1006	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1007
	1008	!
[97]	1009	!-- Reference value has to be used in buoyancy terms
	1010	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1011
	1012	!
	1013	!-- Sign of buoyancy/stability terms
	1014	IF ( ocean ) atmos_ocean_sign = -1.0
	1015
	1016	!
[108]	1017	!-- Ocean version must use flux boundary conditions at the top
	1018	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1019	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1020	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1021	ENDIF
[97]	1022
	1023	!
[1]	1024	!-- In case of a given slope, compute the relevant quantities
	1025	IF ( alpha_surface /= 0.0 ) THEN
	1026	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1027	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1028	' ) must be < 90.0'
[226]	1029	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1030	ENDIF
	1031	sloping_surface = .TRUE.
	1032	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1033	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1034	ENDIF
	1035
	1036	!
	1037	!-- Check time step and cfl_factor
	1038	IF ( dt /= -1.0 ) THEN
	1039	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1040	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1041	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1042	ENDIF
	1043	dt_3d = dt
	1044	dt_fixed = .TRUE.
	1045	ENDIF
	1046
	1047	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1048	IF ( cfl_factor == -1.0 ) THEN
	1049	IF ( momentum_advec == 'ups-scheme' .OR. &
	1050	scalar_advec == 'ups-scheme' ) THEN
	1051	cfl_factor = 0.8
	1052	ELSE
	1053	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1054	cfl_factor = 0.8
	1055	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1056	cfl_factor = 0.9
	1057	ELSE
	1058	cfl_factor = 0.1
	1059	ENDIF
	1060	ENDIF
	1061	ELSE
[215]	1062	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1063	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1064	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1065	ENDIF
	1066	ENDIF
	1067
	1068	!
	1069	!-- Store simulated time at begin
	1070	simulated_time_at_begin = simulated_time
	1071
	1072	!
[291]	1073	!-- Store reference time for coupled runs and change the coupling flag,
	1074	!-- if ...
	1075	IF ( simulated_time == 0.0 ) THEN
	1076	IF ( coupling_start_time == 0.0 ) THEN
	1077	time_since_reference_point = 0.0
	1078	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1079	run_coupled = .FALSE.
	1080	ENDIF
	1081	ENDIF
	1082
	1083	!
[1]	1084	!-- Set wind speed in the Galilei-transformed system
	1085	IF ( galilei_transformation ) THEN
	1086	IF ( use_ug_for_galilei_tr .AND. &
	1087	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1088	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1089	u_gtrans = ug_surface
	1090	v_gtrans = vg_surface
	1091	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1092	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1093	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1094	' with galilei transformation'
[226]	1095	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1096	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1097	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1098	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1099	' with galilei transformation'
[226]	1100	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1101	ELSE
[215]	1102	message_string = 'variable translation speed used for galilei-' // &
	1103	'transformation, which may cause & instabilities in stably ' // &
	1104	'stratified regions'
[226]	1105	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1106	ENDIF
	1107	ENDIF
	1108
	1109	!
	1110	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1111	!-- fluxes have to be used in the diffusion-terms
	1112	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1113
	1114	!
	1115	!-- Check boundary conditions and set internal variables:
	1116	!-- Lateral boundary conditions
[73]	1117	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1118	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1119	message_string = 'unknown boundary condition: bc_lr = "' // &
	1120	TRIM( bc_lr ) // '"'
[226]	1121	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1122	ENDIF
[73]	1123	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1124	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1125	message_string = 'unknown boundary condition: bc_ns = "' // &
	1126	TRIM( bc_ns ) // '"'
[226]	1127	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1128	ENDIF
	1129
	1130	!
[366]	1131	!-- Internal variables used for speed optimization in if clauses
	1132	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1133	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1134
	1135	!
[1]	1136	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1137	!-- Willimas advection scheme. Several schemes and tools do not work with
	1138	!-- non-cyclic boundary conditions.
	1139	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1140	IF ( psolver /= 'multigrid' ) THEN
[215]	1141	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1142	'psolver = "' // TRIM( psolver ) // '"'
[226]	1143	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1144	ENDIF
	1145	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1146	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1147	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1148	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1149	ENDIF
	1150	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1151	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1152	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1153	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1154	ENDIF
	1155	IF ( galilei_transformation ) THEN
[215]	1156	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1157	'galilei_transformation = .T.'
[226]	1158	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1159	ENDIF
	1160	ENDIF
	1161
	1162	!
	1163	!-- Bottom boundary condition for the turbulent Kinetic energy
	1164	IF ( bc_e_b == 'neumann' ) THEN
	1165	ibc_e_b = 1
	1166	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1167	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1168	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1169	ENDIF
	1170	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1171	ibc_e_b = 2
	1172	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1173	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1174	TRIM( bc_e_b ) // '"'
[226]	1175	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1176	ENDIF
	1177	IF ( .NOT. prandtl_layer ) THEN
	1178	bc_e_b = 'neumann'
	1179	ibc_e_b = 1
[215]	1180	message_string = 'boundary condition bc_e_b changed to "' // &
	1181	TRIM( bc_e_b ) // '"'
[226]	1182	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1183	ENDIF
	1184	ELSE
[215]	1185	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1186	TRIM( bc_e_b ) // '"'
[226]	1187	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1188	ENDIF
	1189
	1190	!
	1191	!-- Boundary conditions for perturbation pressure
	1192	IF ( bc_p_b == 'dirichlet' ) THEN
	1193	ibc_p_b = 0
	1194	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1195	ibc_p_b = 1
	1196	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1197	ibc_p_b = 2
	1198	ELSE
[215]	1199	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1200	TRIM( bc_p_b ) // '"'
[226]	1201	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1202	ENDIF
	1203	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1204	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1205	'" not allowed with prandtl_layer = .FALSE.'
[226]	1206	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1207	ENDIF
	1208	IF ( bc_p_t == 'dirichlet' ) THEN
	1209	ibc_p_t = 0
	1210	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1211	ibc_p_t = 1
	1212	ELSE
[215]	1213	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1214	TRIM( bc_p_t ) // '"'
[226]	1215	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1216	ENDIF
	1217
	1218	!
	1219	!-- Boundary conditions for potential temperature
[102]	1220	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1221	ibc_pt_b = 2
[1]	1222	ELSE
[102]	1223	IF ( bc_pt_b == 'dirichlet' ) THEN
	1224	ibc_pt_b = 0
	1225	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1226	ibc_pt_b = 1
	1227	ELSE
[215]	1228	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1229	TRIM( bc_pt_b ) // '"'
[226]	1230	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1231	ENDIF
	1232	ENDIF
[102]	1233
[1]	1234	IF ( bc_pt_t == 'dirichlet' ) THEN
	1235	ibc_pt_t = 0
	1236	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1237	ibc_pt_t = 1
[19]	1238	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1239	ibc_pt_t = 2
[1]	1240	ELSE
[215]	1241	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1242	TRIM( bc_pt_t ) // '"'
[226]	1243	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1244	ENDIF
	1245
[20]	1246	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1247	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1248	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1249	top_momentumflux_v /= 9999999.9 ) THEN
	1250	constant_top_momentumflux = .TRUE.
	1251	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1252	top_momentumflux_v == 9999999.9 ) ) THEN
	1253	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1254	'must be set'
[226]	1255	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1256	ENDIF
[1]	1257
	1258	!
	1259	!-- A given surface temperature implies Dirichlet boundary condition for
	1260	!-- temperature. In this case specification of a constant heat flux is
	1261	!-- forbidden.
	1262	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1263	surface_heatflux /= 0.0 ) THEN
[215]	1264	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1265	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1266	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1267	ENDIF
	1268	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1269	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1270	'wed with pt_surface_initial_change (/=0) = ', &
	1271	pt_surface_initial_change
[226]	1272	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1273	ENDIF
	1274
	1275	!
[19]	1276	!-- A given temperature at the top implies Dirichlet boundary condition for
	1277	!-- temperature. In this case specification of a constant heat flux is
	1278	!-- forbidden.
	1279	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1280	top_heatflux /= 0.0 ) THEN
[215]	1281	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1282	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1283	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1284	ENDIF
	1285
	1286	!
[95]	1287	!-- Boundary conditions for salinity
	1288	IF ( ocean ) THEN
	1289	IF ( bc_sa_t == 'dirichlet' ) THEN
	1290	ibc_sa_t = 0
	1291	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1292	ibc_sa_t = 1
	1293	ELSE
[215]	1294	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1295	TRIM( bc_sa_t ) // '"'
[226]	1296	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1297	ENDIF
	1298
	1299	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1300	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1301	message_string = 'boundary condition: bc_sa_t = "' // &
	1302	TRIM( bc_sa_t ) // '" requires to set ' // &
	1303	'top_salinityflux'
[226]	1304	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1305	ENDIF
[95]	1306
	1307	!
	1308	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1309	!-- salinity. In this case specification of a constant salinity flux is
	1310	!-- forbidden.
	1311	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1312	top_salinityflux /= 0.0 ) THEN
[215]	1313	message_string = 'boundary condition: bc_sa_t = "' // &
	1314	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1315	'constant_top_salinityflux = .TRUE.'
[226]	1316	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1317	ENDIF
	1318
	1319	ENDIF
	1320
	1321	!
[75]	1322	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1323	!-- water content / scalar
[75]	1324	IF ( humidity .OR. passive_scalar ) THEN
	1325	IF ( humidity ) THEN
[1]	1326	sq = 'q'
	1327	ELSE
	1328	sq = 's'
	1329	ENDIF
	1330	IF ( bc_q_b == 'dirichlet' ) THEN
	1331	ibc_q_b = 0
	1332	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1333	ibc_q_b = 1
	1334	ELSE
[215]	1335	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1336	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1337	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1338	ENDIF
	1339	IF ( bc_q_t == 'dirichlet' ) THEN
	1340	ibc_q_t = 0
	1341	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1342	ibc_q_t = 1
	1343	ELSE
[215]	1344	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1345	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1346	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1347	ENDIF
	1348
	1349	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1350
	1351	!
	1352	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1353	!-- humidity. In this case specification of a constant water flux is
[1]	1354	!-- forbidden.
	1355	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1356	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1357	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1358	'th prescribed surface flux'
[226]	1359	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1360	ENDIF
	1361	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1362	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1363	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1364	q_surface_initial_change
[226]	1365	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1366	ENDIF
	1367
	1368	ENDIF
	1369
	1370	!
	1371	!-- Boundary conditions for horizontal components of wind speed
	1372	IF ( bc_uv_b == 'dirichlet' ) THEN
	1373	ibc_uv_b = 0
	1374	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1375	ibc_uv_b = 1
	1376	IF ( prandtl_layer ) THEN
[215]	1377	message_string = 'boundary condition: bc_uv_b = "' // &
	1378	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1379	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1380	ENDIF
	1381	ELSE
[215]	1382	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1383	TRIM( bc_uv_b ) // '"'
[226]	1384	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1385	ENDIF
[215]	1386
[108]	1387	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1388	bc_uv_t = 'neumann'
[1]	1389	ibc_uv_t = 1
	1390	ELSE
[132]	1391	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1392	ibc_uv_t = 0
	1393	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1394	ibc_uv_t = 1
	1395	ELSE
[215]	1396	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1397	TRIM( bc_uv_t ) // '"'
[226]	1398	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1399	ENDIF
	1400	ENDIF
	1401
	1402	!
	1403	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1404	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1405	IF ( momentum_advec == 'ups-scheme' ) THEN
	1406	rayleigh_damping_factor = 0.01
	1407	ELSE
	1408	rayleigh_damping_factor = 0.0
	1409	ENDIF
	1410	ELSE
	1411	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1412	THEN
[215]	1413	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1414	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1415	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1416	ENDIF
	1417	ENDIF
	1418
	1419	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1420	IF ( .NOT. ocean ) THEN
	1421	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1422	ELSE
	1423	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1424	ENDIF
[1]	1425	ELSE
[108]	1426	IF ( .NOT. ocean ) THEN
	1427	IF ( rayleigh_damping_height < 0.0 .OR. &
	1428	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1429	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1430	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1431	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1432	ENDIF
[108]	1433	ELSE
	1434	IF ( rayleigh_damping_height > 0.0 .OR. &
	1435	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1436	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1437	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1438	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1439	ENDIF
[1]	1440	ENDIF
	1441	ENDIF
	1442
	1443	!
	1444	!-- Check limiters for Upstream-Spline scheme
	1445	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1446	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1447	overshoot_limit_e < 0.0 ) THEN
[215]	1448	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1449	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1450	ENDIF
	1451	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1452	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1453	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1454	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1455	ENDIF
	1456
	1457	!
	1458	!-- Check number of chosen statistic regions. More than 10 regions are not
	1459	!-- allowed, because so far no more than 10 corresponding output files can
	1460	!-- be opened (cf. check_open)
	1461	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1462	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1463	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1464	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1465	ENDIF
	1466	IF ( normalizing_region > statistic_regions .OR. &
	1467	normalizing_region < 0) THEN
[215]	1468	WRITE ( message_string, * ) 'normalizing_region = ', &
	1469	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1470	' (value of statistic_regions)'
[226]	1471	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1472	ENDIF
	1473
	1474	!
[116]	1475	!-- Check the interval for sorting particles.
	1476	!-- Using particles as cloud droplets requires sorting after each timestep.
	1477	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1478	dt_sort_particles = 0.0
[215]	1479	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1480	'_droplets = .TRUE.'
[226]	1481	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1482	ENDIF
	1483
	1484	!
[1]	1485	!-- Set the default intervals for data output, if necessary
	1486	!-- NOTE: dt_dosp has already been set in package_parin
	1487	IF ( dt_data_output /= 9999999.9 ) THEN
	1488	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1489	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1490	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1491	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1492	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1493	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1494	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[410]	1495	DO mid = 1, 20
	1496	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1497	ENDDO
[1]	1498	ENDIF
	1499
	1500	!
	1501	!-- Set the default skip time intervals for data output, if necessary
	1502	IF ( skip_time_dopr == 9999999.9 ) &
	1503	skip_time_dopr = skip_time_data_output
	1504	IF ( skip_time_dosp == 9999999.9 ) &
	1505	skip_time_dosp = skip_time_data_output
	1506	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1507	skip_time_do2d_xy = skip_time_data_output
	1508	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1509	skip_time_do2d_xz = skip_time_data_output
	1510	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1511	skip_time_do2d_yz = skip_time_data_output
	1512	IF ( skip_time_do3d == 9999999.9 ) &
	1513	skip_time_do3d = skip_time_data_output
	1514	IF ( skip_time_data_output_av == 9999999.9 ) &
	1515	skip_time_data_output_av = skip_time_data_output
[410]	1516	DO mid = 1, 20
	1517	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1518	skip_time_domask(mid) = skip_time_data_output
	1519	ENDDO
[1]	1520
	1521	!
	1522	!-- Check the average intervals (first for 3d-data, then for profiles and
	1523	!-- spectra)
	1524	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1525	WRITE( message_string, * ) 'averaging_interval = ', &
	1526	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1527	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1528	ENDIF
	1529
	1530	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1531	averaging_interval_pr = averaging_interval
	1532	ENDIF
	1533
	1534	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1535	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1536	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1537	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1538	ENDIF
	1539
	1540	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1541	averaging_interval_sp = averaging_interval
	1542	ENDIF
	1543
	1544	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1545	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1546	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1547	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1548	ENDIF
	1549
	1550	!
	1551	!-- Set the default interval for profiles entering the temporal average
	1552	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1553	dt_averaging_input_pr = dt_averaging_input
	1554	ENDIF
	1555
	1556	!
	1557	!-- Set the default interval for the output of timeseries to a reasonable
	1558	!-- value (tries to minimize the number of calls of flow_statistics)
	1559	IF ( dt_dots == 9999999.9 ) THEN
	1560	IF ( averaging_interval_pr == 0.0 ) THEN
	1561	dt_dots = MIN( dt_run_control, dt_dopr )
	1562	ELSE
	1563	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1564	ENDIF
	1565	ENDIF
	1566
	1567	!
	1568	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1569	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1570	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1571	dt_averaging_input, ' must be <= averaging_interval = ', &
	1572	averaging_interval
[226]	1573	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1574	ENDIF
	1575
	1576	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1577	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1578	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1579	averaging_interval_pr
[226]	1580	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1581	ENDIF
	1582
	1583	!
[72]	1584	!-- Set the default value for the integration interval of precipitation amount
	1585	IF ( precipitation ) THEN
	1586	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1587	precipitation_amount_interval = dt_do2d_xy
	1588	ELSE
	1589	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1590	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1591	precipitation_amount_interval, ' must not be larger than ', &
	1592	'dt_do2d_xy = ', dt_do2d_xy
[226]	1593	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1594	ENDIF
	1595	ENDIF
	1596	ENDIF
	1597
	1598	!
[1]	1599	!-- Determine the number of output profiles and check whether they are
	1600	!-- permissible
	1601	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1602
	1603	dopr_n = dopr_n + 1
	1604	i = dopr_n
	1605
	1606	!
	1607	!-- Determine internal profile number (for hom, homs)
	1608	!-- and store height levels
	1609	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1610
	1611	CASE ( 'u', '#u' )
	1612	dopr_index(i) = 1
[87]	1613	dopr_unit(i) = 'm/s'
[1]	1614	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1615	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1616	dopr_initial_index(i) = 5
	1617	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1618	data_output_pr(i) = data_output_pr(i)(2:)
	1619	ENDIF
	1620
	1621	CASE ( 'v', '#v' )
	1622	dopr_index(i) = 2
[87]	1623	dopr_unit(i) = 'm/s'
	1624	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1625	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1626	dopr_initial_index(i) = 6
	1627	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1628	data_output_pr(i) = data_output_pr(i)(2:)
	1629	ENDIF
	1630
	1631	CASE ( 'w' )
	1632	dopr_index(i) = 3
[87]	1633	dopr_unit(i) = 'm/s'
	1634	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1635
	1636	CASE ( 'pt', '#pt' )
	1637	IF ( .NOT. cloud_physics ) THEN
	1638	dopr_index(i) = 4
[87]	1639	dopr_unit(i) = 'K'
[1]	1640	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1641	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1642	dopr_initial_index(i) = 7
	1643	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1644	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1645	data_output_pr(i) = data_output_pr(i)(2:)
	1646	ENDIF
	1647	ELSE
	1648	dopr_index(i) = 43
[87]	1649	dopr_unit(i) = 'K'
[1]	1650	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1651	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1652	dopr_initial_index(i) = 28
	1653	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1654	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1655	data_output_pr(i) = data_output_pr(i)(2:)
	1656	ENDIF
	1657	ENDIF
	1658
	1659	CASE ( 'e' )
	1660	dopr_index(i) = 8
[87]	1661	dopr_unit(i) = 'm2/s2'
[1]	1662	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1663	hom(nzb,2,8,:) = 0.0
	1664
	1665	CASE ( 'km', '#km' )
	1666	dopr_index(i) = 9
[87]	1667	dopr_unit(i) = 'm2/s'
[1]	1668	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1669	hom(nzb,2,9,:) = 0.0
	1670	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1671	dopr_initial_index(i) = 23
	1672	hom(:,2,23,:) = hom(:,2,9,:)
	1673	data_output_pr(i) = data_output_pr(i)(2:)
	1674	ENDIF
	1675
	1676	CASE ( 'kh', '#kh' )
	1677	dopr_index(i) = 10
[87]	1678	dopr_unit(i) = 'm2/s'
[1]	1679	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1680	hom(nzb,2,10,:) = 0.0
	1681	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1682	dopr_initial_index(i) = 24
	1683	hom(:,2,24,:) = hom(:,2,10,:)
	1684	data_output_pr(i) = data_output_pr(i)(2:)
	1685	ENDIF
	1686
	1687	CASE ( 'l', '#l' )
	1688	dopr_index(i) = 11
[87]	1689	dopr_unit(i) = 'm'
[1]	1690	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1691	hom(nzb,2,11,:) = 0.0
	1692	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1693	dopr_initial_index(i) = 25
	1694	hom(:,2,25,:) = hom(:,2,11,:)
	1695	data_output_pr(i) = data_output_pr(i)(2:)
	1696	ENDIF
	1697
	1698	CASE ( 'w"u"' )
	1699	dopr_index(i) = 12
[87]	1700	dopr_unit(i) = 'm2/s2'
[1]	1701	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1702	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1703
	1704	CASE ( 'wu' )
	1705	dopr_index(i) = 13
[87]	1706	dopr_unit(i) = 'm2/s2'
[1]	1707	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1708
	1709	CASE ( 'w"v"' )
	1710	dopr_index(i) = 14
[87]	1711	dopr_unit(i) = 'm2/s2'
[1]	1712	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1713	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1714
	1715	CASE ( 'wv' )
	1716	dopr_index(i) = 15
[87]	1717	dopr_unit(i) = 'm2/s2'
[1]	1718	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1719
	1720	CASE ( 'w"pt"' )
	1721	dopr_index(i) = 16
[87]	1722	dopr_unit(i) = 'K m/s'
[1]	1723	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1724
	1725	CASE ( 'wpt' )
	1726	dopr_index(i) = 17
[87]	1727	dopr_unit(i) = 'K m/s'
[1]	1728	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1729
	1730	CASE ( 'wpt' )
	1731	dopr_index(i) = 18
[87]	1732	dopr_unit(i) = 'K m/s'
[1]	1733	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1734
	1735	CASE ( 'wu' )
	1736	dopr_index(i) = 19
[87]	1737	dopr_unit(i) = 'm2/s2'
[1]	1738	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1739	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1740
	1741	CASE ( 'wv' )
	1742	dopr_index(i) = 20
[87]	1743	dopr_unit(i) = 'm2/s2'
[1]	1744	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1745	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1746
	1747	CASE ( 'wptBC' )
	1748	dopr_index(i) = 21
[87]	1749	dopr_unit(i) = 'K m/s'
[1]	1750	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1751
	1752	CASE ( 'wptBC' )
	1753	dopr_index(i) = 22
[87]	1754	dopr_unit(i) = 'K m/s'
[1]	1755	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1756
[96]	1757	CASE ( 'sa', '#sa' )
	1758	IF ( .NOT. ocean ) THEN
[215]	1759	message_string = 'data_output_pr = ' // &
	1760	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1761	'lemented for ocean = .FALSE.'
[226]	1762	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1763	ELSE
	1764	dopr_index(i) = 23
	1765	dopr_unit(i) = 'psu'
	1766	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1767	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1768	dopr_initial_index(i) = 26
	1769	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1770	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1771	data_output_pr(i) = data_output_pr(i)(2:)
	1772	ENDIF
	1773	ENDIF
	1774
[1]	1775	CASE ( 'u*2' )
	1776	dopr_index(i) = 30
[87]	1777	dopr_unit(i) = 'm2/s2'
[1]	1778	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1779
	1780	CASE ( 'v*2' )
	1781	dopr_index(i) = 31
[87]	1782	dopr_unit(i) = 'm2/s2'
[1]	1783	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1784
	1785	CASE ( 'w*2' )
	1786	dopr_index(i) = 32
[87]	1787	dopr_unit(i) = 'm2/s2'
[1]	1788	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1789
	1790	CASE ( 'pt*2' )
	1791	dopr_index(i) = 33
[87]	1792	dopr_unit(i) = 'K2'
[1]	1793	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1794
	1795	CASE ( 'e*' )
	1796	dopr_index(i) = 34
[87]	1797	dopr_unit(i) = 'm2/s2'
[1]	1798	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1799
	1800	CASE ( 'w2pt' )
	1801	dopr_index(i) = 35
[87]	1802	dopr_unit(i) = 'K m2/s2'
[1]	1803	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1804
	1805	CASE ( 'wpt2' )
	1806	dopr_index(i) = 36
[87]	1807	dopr_unit(i) = 'K2 m/s'
[1]	1808	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1809
	1810	CASE ( 'we' )
	1811	dopr_index(i) = 37
[87]	1812	dopr_unit(i) = 'm3/s3'
[1]	1813	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1814
	1815	CASE ( 'w*3' )
	1816	dopr_index(i) = 38
[87]	1817	dopr_unit(i) = 'm3/s3'
[1]	1818	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1819
	1820	CASE ( 'Sw' )
	1821	dopr_index(i) = 39
[89]	1822	dopr_unit(i) = 'none'
[1]	1823	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1824
[232]	1825	CASE ( 'p' )
	1826	dopr_index(i) = 40
	1827	dopr_unit(i) = 'Pa'
	1828	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1829
[1]	1830	CASE ( 'q', '#q' )
[108]	1831	IF ( .NOT. humidity ) THEN
[215]	1832	message_string = 'data_output_pr = ' // &
	1833	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1834	'lemented for humidity = .FALSE.'
[226]	1835	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1836	ELSE
	1837	dopr_index(i) = 41
[87]	1838	dopr_unit(i) = 'kg/kg'
	1839	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1840	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1841	dopr_initial_index(i) = 26
	1842	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1843	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1844	data_output_pr(i) = data_output_pr(i)(2:)
	1845	ENDIF
	1846	ENDIF
	1847
	1848	CASE ( 's', '#s' )
	1849	IF ( .NOT. passive_scalar ) THEN
[215]	1850	message_string = 'data_output_pr = ' // &
	1851	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1852	'lemented for passive_scalar = .FALSE.'
[226]	1853	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1854	ELSE
	1855	dopr_index(i) = 41
[87]	1856	dopr_unit(i) = 'kg/m3'
	1857	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1858	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1859	dopr_initial_index(i) = 26
	1860	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1861	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1862	data_output_pr(i) = data_output_pr(i)(2:)
	1863	ENDIF
	1864	ENDIF
	1865
	1866	CASE ( 'qv', '#qv' )
	1867	IF ( .NOT. cloud_physics ) THEN
	1868	dopr_index(i) = 41
[87]	1869	dopr_unit(i) = 'kg/kg'
	1870	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1871	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1872	dopr_initial_index(i) = 26
	1873	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1874	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1875	data_output_pr(i) = data_output_pr(i)(2:)
	1876	ENDIF
	1877	ELSE
	1878	dopr_index(i) = 42
[87]	1879	dopr_unit(i) = 'kg/kg'
	1880	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1881	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1882	dopr_initial_index(i) = 27
	1883	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1884	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1885	data_output_pr(i) = data_output_pr(i)(2:)
	1886	ENDIF
	1887	ENDIF
	1888
	1889	CASE ( 'lpt', '#lpt' )
	1890	IF ( .NOT. cloud_physics ) THEN
[215]	1891	message_string = 'data_output_pr = ' // &
	1892	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1893	'lemented for cloud_physics = .FALSE.'
[226]	1894	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	1895	ELSE
	1896	dopr_index(i) = 4
[87]	1897	dopr_unit(i) = 'K'
[1]	1898	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1899	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1900	dopr_initial_index(i) = 7
	1901	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1902	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1903	data_output_pr(i) = data_output_pr(i)(2:)
	1904	ENDIF
	1905	ENDIF
	1906
	1907	CASE ( 'vpt', '#vpt' )
	1908	dopr_index(i) = 44
[87]	1909	dopr_unit(i) = 'K'
	1910	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1911	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1912	dopr_initial_index(i) = 29
	1913	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1914	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1915	data_output_pr(i) = data_output_pr(i)(2:)
	1916	ENDIF
	1917
	1918	CASE ( 'w"vpt"' )
	1919	dopr_index(i) = 45
[87]	1920	dopr_unit(i) = 'K m/s'
[1]	1921	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1922
	1923	CASE ( 'wvpt' )
	1924	dopr_index(i) = 46
[87]	1925	dopr_unit(i) = 'K m/s'
[1]	1926	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1927
	1928	CASE ( 'wvpt' )
	1929	dopr_index(i) = 47
[87]	1930	dopr_unit(i) = 'K m/s'
[1]	1931	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1932
	1933	CASE ( 'w"q"' )
[108]	1934	IF ( .NOT. humidity ) THEN
[215]	1935	message_string = 'data_output_pr = ' // &
	1936	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1937	'lemented for humidity = .FALSE.'
[226]	1938	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1939	ELSE
	1940	dopr_index(i) = 48
[87]	1941	dopr_unit(i) = 'kg/kg m/s'
[1]	1942	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1943	ENDIF
	1944
	1945	CASE ( 'wq' )
[108]	1946	IF ( .NOT. humidity ) THEN
[215]	1947	message_string = 'data_output_pr = ' // &
	1948	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1949	'lemented for humidity = .FALSE.'
[226]	1950	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1951	ELSE
	1952	dopr_index(i) = 49
[87]	1953	dopr_unit(i) = 'kg/kg m/s'
[1]	1954	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1955	ENDIF
	1956
	1957	CASE ( 'wq' )
[108]	1958	IF ( .NOT. humidity ) THEN
[215]	1959	message_string = 'data_output_pr = ' // &
	1960	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1961	'lemented for humidity = .FALSE.'
[226]	1962	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1963	ELSE
	1964	dopr_index(i) = 50
[87]	1965	dopr_unit(i) = 'kg/kg m/s'
[1]	1966	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1967	ENDIF
	1968
	1969	CASE ( 'w"s"' )
	1970	IF ( .NOT. passive_scalar ) THEN
[215]	1971	message_string = 'data_output_pr = ' // &
	1972	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1973	'lemented for passive_scalar = .FALSE.'
[226]	1974	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1975	ELSE
	1976	dopr_index(i) = 48
[87]	1977	dopr_unit(i) = 'kg/m3 m/s'
[1]	1978	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1979	ENDIF
	1980
	1981	CASE ( 'ws' )
	1982	IF ( .NOT. passive_scalar ) THEN
[215]	1983	message_string = 'data_output_pr = ' // &
	1984	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1985	'lemented for passive_scalar = .FALSE.'
[226]	1986	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1987	ELSE
	1988	dopr_index(i) = 49
[87]	1989	dopr_unit(i) = 'kg/m3 m/s'
[1]	1990	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1991	ENDIF
	1992
	1993	CASE ( 'ws' )
	1994	IF ( .NOT. passive_scalar ) THEN
[215]	1995	message_string = 'data_output_pr = ' // &
	1996	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1997	'lemented for passive_scalar = .FALSE.'
[226]	1998	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1999	ELSE
	2000	dopr_index(i) = 50
[87]	2001	dopr_unit(i) = 'kg/m3 m/s'
[1]	2002	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2003	ENDIF
	2004
	2005	CASE ( 'w"qv"' )
[75]	2006	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2007	THEN
	2008	dopr_index(i) = 48
[87]	2009	dopr_unit(i) = 'kg/kg m/s'
[1]	2010	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2011	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2012	dopr_index(i) = 51
[87]	2013	dopr_unit(i) = 'kg/kg m/s'
[1]	2014	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2015	ELSE
[215]	2016	message_string = 'data_output_pr = ' // &
	2017	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2018	'lemented for cloud_physics = .FALSE. an&' // &
	2019	'd humidity = .FALSE.'
[226]	2020	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2021	ENDIF
	2022
	2023	CASE ( 'wqv' )
[75]	2024	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2025	THEN
	2026	dopr_index(i) = 49
[87]	2027	dopr_unit(i) = 'kg/kg m/s'
[1]	2028	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2029	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2030	dopr_index(i) = 52
[87]	2031	dopr_unit(i) = 'kg/kg m/s'
[1]	2032	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2033	ELSE
[215]	2034	message_string = 'data_output_pr = ' // &
	2035	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2036	'lemented for cloud_physics = .FALSE. an&' // &
	2037	'd humidity = .FALSE.'
[226]	2038	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2039	ENDIF
	2040
	2041	CASE ( 'wqv' )
[75]	2042	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2043	THEN
	2044	dopr_index(i) = 50
[87]	2045	dopr_unit(i) = 'kg/kg m/s'
[1]	2046	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2047	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2048	dopr_index(i) = 53
[87]	2049	dopr_unit(i) = 'kg/kg m/s'
[1]	2050	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2051	ELSE
[215]	2052	message_string = 'data_output_pr = ' // &
	2053	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2054	'lemented for cloud_physics = .FALSE. an&' // &
	2055	'd humidity = .FALSE.'
[226]	2056	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2057	ENDIF
	2058
	2059	CASE ( 'ql' )
	2060	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2061	message_string = 'data_output_pr = ' // &
	2062	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2063	'lemented for cloud_physics = .FALSE. or' // &
	2064	'&cloud_droplets = .FALSE.'
[226]	2065	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2066	ELSE
	2067	dopr_index(i) = 54
[87]	2068	dopr_unit(i) = 'kg/kg'
[1]	2069	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2070	ENDIF
	2071
	2072	CASE ( 'wuu*/dz' )
	2073	dopr_index(i) = 55
[87]	2074	dopr_unit(i) = 'm2/s3'
[1]	2075	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2076
	2077	CASE ( 'wp/dz' )
	2078	dopr_index(i) = 56
[87]	2079	dopr_unit(i) = 'm2/s3'
[106]	2080	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2081
	2082	CASE ( 'w"e/dz' )
	2083	dopr_index(i) = 57
[87]	2084	dopr_unit(i) = 'm2/s3'
[1]	2085	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2086
	2087	CASE ( 'u"pt"' )
	2088	dopr_index(i) = 58
[87]	2089	dopr_unit(i) = 'K m/s'
[1]	2090	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2091
	2092	CASE ( 'upt' )
	2093	dopr_index(i) = 59
[87]	2094	dopr_unit(i) = 'K m/s'
[1]	2095	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2096
	2097	CASE ( 'upt_t' )
	2098	dopr_index(i) = 60
[87]	2099	dopr_unit(i) = 'K m/s'
[1]	2100	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2101
	2102	CASE ( 'v"pt"' )
	2103	dopr_index(i) = 61
[87]	2104	dopr_unit(i) = 'K m/s'
[1]	2105	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2106
	2107	CASE ( 'vpt' )
	2108	dopr_index(i) = 62
[87]	2109	dopr_unit(i) = 'K m/s'
[1]	2110	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2111
	2112	CASE ( 'vpt_t' )
	2113	dopr_index(i) = 63
[87]	2114	dopr_unit(i) = 'K m/s'
[1]	2115	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2116
[96]	2117	CASE ( 'rho' )
[388]	2118	IF ( .NOT. ocean ) THEN
	2119	message_string = 'data_output_pr = ' // &
	2120	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2121	'lemented for ocean = .FALSE.'
	2122	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2123	ELSE
	2124	dopr_index(i) = 64
	2125	dopr_unit(i) = 'kg/m3'
	2126	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2127	ENDIF
[1]	2128
[96]	2129	CASE ( 'w"sa"' )
	2130	IF ( .NOT. ocean ) THEN
[215]	2131	message_string = 'data_output_pr = ' // &
	2132	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2133	'lemented for ocean = .FALSE.'
[226]	2134	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2135	ELSE
	2136	dopr_index(i) = 65
	2137	dopr_unit(i) = 'psu m/s'
	2138	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2139	ENDIF
	2140
	2141	CASE ( 'wsa' )
	2142	IF ( .NOT. ocean ) THEN
[215]	2143	message_string = 'data_output_pr = ' // &
	2144	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2145	'lemented for ocean = .FALSE.'
[226]	2146	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2147	ELSE
	2148	dopr_index(i) = 66
	2149	dopr_unit(i) = 'psu m/s'
	2150	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2151	ENDIF
	2152
	2153	CASE ( 'wsa' )
	2154	IF ( .NOT. ocean ) THEN
[215]	2155	message_string = 'data_output_pr = ' // &
	2156	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2157	'lemented for ocean = .FALSE.'
[226]	2158	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2159	ELSE
	2160	dopr_index(i) = 67
	2161	dopr_unit(i) = 'psu m/s'
	2162	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2163	ENDIF
	2164
[106]	2165	CASE ( 'wp' )
	2166	dopr_index(i) = 68
	2167	dopr_unit(i) = 'm3/s3'
	2168	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2169
[106]	2170	CASE ( 'w"e' )
	2171	dopr_index(i) = 69
	2172	dopr_unit(i) = 'm3/s3'
	2173	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2174
[197]	2175	CASE ( 'q*2' )
	2176	IF ( .NOT. humidity ) THEN
[215]	2177	message_string = 'data_output_pr = ' // &
	2178	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2179	'lemented for humidity = .FALSE.'
[226]	2180	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2181	ELSE
	2182	dopr_index(i) = 70
	2183	dopr_unit(i) = 'kg2/kg2'
	2184	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2185	ENDIF
[106]	2186
[388]	2187	CASE ( 'prho' )
	2188	IF ( .NOT. ocean ) THEN
	2189	message_string = 'data_output_pr = ' // &
	2190	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2191	'lemented for ocean = .FALSE.'
	2192	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2193	ELSE
	2194	dopr_index(i) = 71
	2195	dopr_unit(i) = 'kg/m3'
	2196	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2197	ENDIF
	2198
	2199	CASE ( 'hyp' )
	2200	dopr_index(i) = 72
	2201	dopr_unit(i) = 'kPa'
	2202	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2203
[1]	2204	CASE DEFAULT
[87]	2205
	2206	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2207
	2208	IF ( unit == 'illegal' ) THEN
[215]	2209	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2210	message_string = 'illegal value for data_output_pr or ' // &
	2211	'data_output_pr_user = "' // &
	2212	TRIM( data_output_pr(i) ) // '"'
[226]	2213	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2214	ELSE
	2215	message_string = 'illegal value for data_output_pr = "' // &
	2216	TRIM( data_output_pr(i) ) // '"'
[226]	2217	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2218	ENDIF
[1]	2219	ENDIF
	2220
	2221	END SELECT
	2222	!
	2223	!-- Check to which of the predefined coordinate systems the profile belongs
	2224	DO k = 1, crmax
	2225	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2226	/=0 ) &
	2227	THEN
	2228	dopr_crossindex(i) = k
	2229	EXIT
	2230	ENDIF
	2231	ENDDO
	2232	!
	2233	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2234	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2235	!-- control characters
	2236	dopr_label(i) = data_output_pr(i)
	2237	position = INDEX( dopr_label(i) , '"' )
	2238	DO WHILE ( position /= 0 )
	2239	dopr_label(i)(position:position) = ''''
	2240	position = INDEX( dopr_label(i) , '"' )
	2241	ENDDO
	2242
	2243	ENDDO
	2244
	2245	!
	2246	!-- y-value range of the coordinate system (PROFIL).
	2247	!-- x-value range determined in plot_1d.
[94]	2248	IF ( .NOT. ocean ) THEN
	2249	cross_uymin = 0.0
	2250	IF ( z_max_do1d == -1.0 ) THEN
	2251	cross_uymax = zu(nzt+1)
	2252	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2253	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2254	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2255	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2256	ELSE
	2257	cross_uymax = z_max_do1d
	2258	ENDIF
[1]	2259	ENDIF
	2260
	2261	!
	2262	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2263	!-- permissible
	2264	DO i = 1, crmax
	2265	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2266
	2267	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2268	j = 0
	2269
	2270	CASE DEFAULT
[215]	2271	message_string = 'unknown normalization method cross_normali' // &
	2272	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2273	'"'
[226]	2274	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2275
	2276	END SELECT
	2277	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2278
	2279	CASE ( '', 'z_i' )
	2280	j = 0
	2281
	2282	CASE DEFAULT
[215]	2283	message_string = 'unknown normalization method cross_normali' // &
	2284	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2285	'"'
[226]	2286	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2287
	2288	END SELECT
	2289	ENDDO
	2290	!
	2291	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2292	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2293	THEN
[215]	2294	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2295	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2296	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2297	ENDIF
	2298
	2299
	2300	!
	2301	!-- Append user-defined data output variables to the standard data output
	2302	IF ( data_output_user(1) /= ' ' ) THEN
	2303	i = 1
	2304	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2305	i = i + 1
	2306	ENDDO
	2307	j = 1
	2308	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2309	IF ( i > 100 ) THEN
[215]	2310	message_string = 'number of output quantitities given by data' // &
	2311	'_output and data_output_user exceeds the limit of 100'
[226]	2312	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2313	ENDIF
	2314	data_output(i) = data_output_user(j)
	2315	i = i + 1
	2316	j = j + 1
	2317	ENDDO
	2318	ENDIF
	2319
	2320	!
	2321	!-- Check and set steering parameters for 2d/3d data output and averaging
	2322	i = 1
	2323	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2324	!
	2325	!-- Check for data averaging
	2326	ilen = LEN_TRIM( data_output(i) )
	2327	j = 0 ! no data averaging
	2328	IF ( ilen > 3 ) THEN
	2329	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2330	j = 1 ! data averaging
	2331	data_output(i) = data_output(i)(1:ilen-3)
	2332	ENDIF
	2333	ENDIF
	2334	!
	2335	!-- Check for cross section or volume data
	2336	ilen = LEN_TRIM( data_output(i) )
	2337	k = 0 ! 3d data
	2338	var = data_output(i)(1:ilen)
	2339	IF ( ilen > 3 ) THEN
	2340	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2341	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2342	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2343	k = 1 ! 2d data
	2344	var = data_output(i)(1:ilen-3)
	2345	ENDIF
	2346	ENDIF
	2347	!
	2348	!-- Check for allowed value and set units
	2349	SELECT CASE ( TRIM( var ) )
	2350
	2351	CASE ( 'e' )
	2352	IF ( constant_diffusion ) THEN
[215]	2353	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2354	'res constant_diffusion = .FALSE.'
[226]	2355	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2356	ENDIF
	2357	unit = 'm2/s2'
	2358
	2359	CASE ( 'pc', 'pr' )
	2360	IF ( .NOT. particle_advection ) THEN
[215]	2361	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2362	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2363	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2364	ENDIF
	2365	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2366	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2367
	2368	CASE ( 'q', 'vpt' )
[75]	2369	IF ( .NOT. humidity ) THEN
[215]	2370	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2371	'res humidity = .TRUE.'
[226]	2372	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2373	ENDIF
	2374	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2375	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2376
	2377	CASE ( 'ql' )
	2378	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2379	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2380	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2381	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2382	ENDIF
	2383	unit = 'kg/kg'
	2384
	2385	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2386	IF ( .NOT. cloud_droplets ) THEN
[215]	2387	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2388	'res cloud_droplets = .TRUE.'
[226]	2389	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2390	ENDIF
	2391	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2392	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2393	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2394
	2395	CASE ( 'qv' )
	2396	IF ( .NOT. cloud_physics ) THEN
[215]	2397	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2398	'res cloud_physics = .TRUE.'
[226]	2399	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2400	ENDIF
	2401	unit = 'kg/kg'
	2402
[96]	2403	CASE ( 'rho' )
	2404	IF ( .NOT. ocean ) THEN
[215]	2405	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2406	'res ocean = .TRUE.'
[226]	2407	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2408	ENDIF
	2409	unit = 'kg/m3'
	2410
[1]	2411	CASE ( 's' )
	2412	IF ( .NOT. passive_scalar ) THEN
[215]	2413	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2414	'res passive_scalar = .TRUE.'
[226]	2415	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2416	ENDIF
	2417	unit = 'conc'
	2418
[96]	2419	CASE ( 'sa' )
	2420	IF ( .NOT. ocean ) THEN
[215]	2421	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2422	'res ocean = .TRUE.'
[226]	2423	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2424	ENDIF
	2425	unit = 'psu'
	2426
[354]	2427	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2428	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2429	message_string = 'illegal value for data_output: "' // &
	2430	TRIM( var ) // '" & only 2d-horizontal ' // &
	2431	'cross sections are allowed for this value'
[226]	2432	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2433	ENDIF
	2434	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2435	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2436	'res cloud_physics = .TRUE.'
[226]	2437	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2438	ENDIF
[72]	2439	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2440	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2441	'res precipitation = .TRUE.'
[226]	2442	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2443	ENDIF
	2444	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2445	message_string = 'temporal averaging of precipitation ' // &
	2446	'amount "' // TRIM( var ) // '" is not possible'
[226]	2447	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2448	ENDIF
	2449	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2450	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2451	'res precipitation = .TRUE.'
[226]	2452	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2453	ENDIF
[354]	2454	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2455	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2456	'res humidity = .TRUE.'
	2457	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2458	ENDIF
[72]	2459
[354]	2460	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2461	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2462	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2463	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2464	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2465	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2466	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2467	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2468
[1]	2469
	2470	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2471	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2472	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2473	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2474	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2475	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2476	CONTINUE
	2477
	2478	CASE DEFAULT
	2479	CALL user_check_data_output( var, unit )
	2480
	2481	IF ( unit == 'illegal' ) THEN
[215]	2482	IF ( data_output_user(1) /= ' ' ) THEN
	2483	message_string = 'illegal value for data_output or ' // &
	2484	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2485	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2486	ELSE
	2487	message_string = 'illegal value for data_output =' // &
	2488	TRIM( data_output(i) ) // '"'
[226]	2489	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2490	ENDIF
	2491	ENDIF
	2492
	2493	END SELECT
	2494	!
	2495	!-- Set the internal steering parameters appropriately
	2496	IF ( k == 0 ) THEN
	2497	do3d_no(j) = do3d_no(j) + 1
	2498	do3d(j,do3d_no(j)) = data_output(i)
	2499	do3d_unit(j,do3d_no(j)) = unit
	2500	ELSE
	2501	do2d_no(j) = do2d_no(j) + 1
	2502	do2d(j,do2d_no(j)) = data_output(i)
	2503	do2d_unit(j,do2d_no(j)) = unit
	2504	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2505	data_output_xy(j) = .TRUE.
	2506	ENDIF
	2507	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2508	data_output_xz(j) = .TRUE.
	2509	ENDIF
	2510	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2511	data_output_yz(j) = .TRUE.
	2512	ENDIF
	2513	ENDIF
	2514
	2515	IF ( j == 1 ) THEN
	2516	!
	2517	!-- Check, if variable is already subject to averaging
	2518	found = .FALSE.
	2519	DO k = 1, doav_n
	2520	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2521	ENDDO
	2522
	2523	IF ( .NOT. found ) THEN
	2524	doav_n = doav_n + 1
	2525	doav(doav_n) = var
	2526	ENDIF
	2527	ENDIF
	2528
	2529	i = i + 1
	2530	ENDDO
	2531
	2532	!
[376]	2533	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2534	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2535	WRITE( message_string, * ) 'output of averaged quantity "', &
	2536	TRIM( doav(1) ), '_av" requires to set a ', &
	2537	'non-zero & averaging interval'
	2538	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2539	ENDIF
	2540
	2541	!
[308]	2542	!-- Check sectional planes and store them in one shared array
	2543	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2544	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2545	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2546	ENDIF
	2547	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2548	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2549	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2550	ENDIF
	2551	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2552	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2553	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2554	ENDIF
[1]	2555	section(:,1) = section_xy
	2556	section(:,2) = section_xz
	2557	section(:,3) = section_yz
	2558
	2559	!
	2560	!-- Upper plot limit (grid point value) for 1D profiles
	2561	IF ( z_max_do1d == -1.0 ) THEN
	2562	nz_do1d = nzt+1
	2563	ELSE
	2564	DO k = nzb+1, nzt+1
	2565	nz_do1d = k
	2566	IF ( zw(k) > z_max_do1d ) EXIT
	2567	ENDDO
	2568	ENDIF
	2569
	2570	!
	2571	!-- Upper plot limit for 2D vertical sections
	2572	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2573	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2574	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2575	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2576	' (zu(nzt))'
[226]	2577	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2578	ENDIF
	2579
	2580	!
	2581	!-- Upper plot limit for 3D arrays
	2582	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2583
	2584	!
	2585	!-- Determine and check accuracy for compressed 3D plot output
	2586	IF ( do3d_compress ) THEN
	2587	!
	2588	!-- Compression only permissible on T3E machines
	2589	IF ( host(1:3) /= 't3e' ) THEN
[215]	2590	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2591	TRIM( host ) // '"'
[226]	2592	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2593	ENDIF
	2594
	2595	i = 1
	2596	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2597
	2598	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2599	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2600	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2601	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2602	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2603	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2604	ENDIF
	2605
	2606	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2607	var = do3d_comp_prec(i)(1:ilen-1)
	2608
	2609	SELECT CASE ( var )
	2610
	2611	CASE ( 'u' )
	2612	j = 1
	2613	CASE ( 'v' )
	2614	j = 2
	2615	CASE ( 'w' )
	2616	j = 3
	2617	CASE ( 'p' )
	2618	j = 4
	2619	CASE ( 'pt' )
	2620	j = 5
	2621
	2622	CASE DEFAULT
[215]	2623	WRITE( message_string, * ) 'unknown variable "', &
	2624	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2625	i, ')'
[226]	2626	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2627
	2628	END SELECT
	2629
	2630	plot_3d_precision(j)%precision = prec
	2631	i = i + 1
	2632
	2633	ENDDO
	2634	ENDIF
	2635
	2636	!
	2637	!-- Check the data output format(s)
	2638	IF ( data_output_format(1) == ' ' ) THEN
	2639	!
	2640	!-- Default value
	2641	netcdf_output = .TRUE.
	2642	ELSE
	2643	i = 1
	2644	DO WHILE ( data_output_format(i) /= ' ' )
	2645
	2646	SELECT CASE ( data_output_format(i) )
	2647
	2648	CASE ( 'netcdf' )
	2649	netcdf_output = .TRUE.
	2650	CASE ( 'iso2d' )
	2651	iso2d_output = .TRUE.
	2652	CASE ( 'profil' )
	2653	profil_output = .TRUE.
	2654	CASE ( 'avs' )
	2655	avs_output = .TRUE.
	2656
	2657	CASE DEFAULT
[215]	2658	message_string = 'unknown value for data_output_format "' // &
	2659	TRIM( data_output_format(i) ) // '"'
[226]	2660	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2661
	2662	END SELECT
	2663
	2664	i = i + 1
	2665	IF ( i > 10 ) EXIT
	2666
	2667	ENDDO
	2668
	2669	ENDIF
	2670
	2671	!
[410]	2672	!-- Check mask conditions
	2673	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2674	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2675	'<= ', max_masks, ' (=max_masks)'
	2676	CALL message( 'check_parameters', 'PA9998', 1, 2, 0, 6, 0 )
	2677	ENDIF
	2678	IF ( masks > 0 ) THEN
	2679	mask_scale(1) = mask_scale_x
	2680	mask_scale(2) = mask_scale_y
	2681	mask_scale(3) = mask_scale_z
	2682	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2683	WRITE( message_string, * ) &
	2684	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2685	'must be > 0.0'
	2686	CALL message( 'check_parameters', 'PA9998', 1, 2, 0, 6, 0 )
	2687	ENDIF
	2688	!
	2689	!-- Generate masks for masked data output
	2690	CALL init_masks
	2691	ENDIF
	2692
	2693	!
[1]	2694	!-- Check netcdf precison
	2695	ldum = .FALSE.
	2696	CALL define_netcdf_header( 'ch', ldum, 0 )
	2697
	2698	!
	2699	!-- Check, whether a constant diffusion coefficient shall be used
	2700	IF ( km_constant /= -1.0 ) THEN
	2701	IF ( km_constant < 0.0 ) THEN
[215]	2702	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2703	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2704	ELSE
	2705	IF ( prandtl_number < 0.0 ) THEN
[215]	2706	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2707	' < 0.0'
[226]	2708	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2709	ENDIF
	2710	constant_diffusion = .TRUE.
	2711
	2712	IF ( prandtl_layer ) THEN
[215]	2713	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2714	'value of km'
[226]	2715	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2716	ENDIF
	2717	ENDIF
	2718	ENDIF
	2719
	2720	!
	2721	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2722	!-- for the horizontal diffusivity used within the outflow damping layer,
	2723	!-- and check/set the width of the damping layer
	2724	IF ( bc_lr /= 'cyclic' ) THEN
	2725	IF ( km_damp_max == -1.0 ) THEN
	2726	km_damp_max = 0.5 * dx
	2727	ENDIF
	2728	IF ( outflow_damping_width == -1.0 ) THEN
	2729	outflow_damping_width = MIN( 20, nx/2 )
	2730	ENDIF
	2731	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2732	message_string = 'outflow_damping width out of range'
[226]	2733	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2734	ENDIF
	2735	ENDIF
	2736
	2737	IF ( bc_ns /= 'cyclic' ) THEN
	2738	IF ( km_damp_max == -1.0 ) THEN
	2739	km_damp_max = 0.5 * dy
	2740	ENDIF
	2741	IF ( outflow_damping_width == -1.0 ) THEN
	2742	outflow_damping_width = MIN( 20, ny/2 )
	2743	ENDIF
	2744	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2745	message_string = 'outflow_damping width out of range'
[226]	2746	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2747	ENDIF
	2748	ENDIF
	2749
	2750	!
	2751	!-- Check value range for rif
	2752	IF ( rif_min >= rif_max ) THEN
[215]	2753	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2754	'than rif_max = ', rif_max
[226]	2755	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2756	ENDIF
	2757
	2758	!
	2759	!-- Determine upper and lower hight level indices for random perturbations
[97]	2760	IF ( disturbance_level_b == -9999999.9 ) THEN
	2761	IF ( ocean ) THEN
	2762	disturbance_level_b = zu((nzt*2)/3)
	2763	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2764	ELSE
	2765	disturbance_level_b = zu(nzb+3)
	2766	disturbance_level_ind_b = nzb + 3
	2767	ENDIF
[1]	2768	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2769	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2770	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2771	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2772	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2773	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2774	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2775	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2776	ELSE
	2777	DO k = 3, nzt-2
	2778	IF ( disturbance_level_b <= zu(k) ) THEN
	2779	disturbance_level_ind_b = k
	2780	EXIT
	2781	ENDIF
	2782	ENDDO
	2783	ENDIF
	2784
[97]	2785	IF ( disturbance_level_t == -9999999.9 ) THEN
	2786	IF ( ocean ) THEN
	2787	disturbance_level_t = zu(nzt-3)
	2788	disturbance_level_ind_t = nzt - 3
	2789	ELSE
	2790	disturbance_level_t = zu(nzt/3)
	2791	disturbance_level_ind_t = nzt / 3
	2792	ENDIF
[1]	2793	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2794	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2795	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2796	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2797	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2798	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2799	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2800	disturbance_level_b
[226]	2801	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2802	ELSE
	2803	DO k = 3, nzt-2
	2804	IF ( disturbance_level_t <= zu(k) ) THEN
	2805	disturbance_level_ind_t = k
	2806	EXIT
	2807	ENDIF
	2808	ENDDO
	2809	ENDIF
	2810
	2811	!
	2812	!-- Check again whether the levels determined this way are ok.
	2813	!-- Error may occur at automatic determination and too few grid points in
	2814	!-- z-direction.
	2815	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2816	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2817	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2818	disturbance_level_b
[226]	2819	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2820	ENDIF
	2821
	2822	!
	2823	!-- Determine the horizontal index range for random perturbations.
	2824	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2825	!-- near the inflow and the perturbation area is further limited to ...(1)
	2826	!-- after the initial phase of the flow.
	2827	dist_nxl = 0; dist_nxr = nx
	2828	dist_nys = 0; dist_nyn = ny
	2829	IF ( bc_lr /= 'cyclic' ) THEN
	2830	IF ( inflow_disturbance_begin == -1 ) THEN
	2831	inflow_disturbance_begin = MIN( 10, nx/2 )
	2832	ENDIF
	2833	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2834	THEN
[215]	2835	message_string = 'inflow_disturbance_begin out of range'
[226]	2836	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2837	ENDIF
	2838	IF ( inflow_disturbance_end == -1 ) THEN
	2839	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2840	ENDIF
	2841	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2842	THEN
[215]	2843	message_string = 'inflow_disturbance_end out of range'
[226]	2844	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2845	ENDIF
	2846	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2847	IF ( inflow_disturbance_begin == -1 ) THEN
	2848	inflow_disturbance_begin = MIN( 10, ny/2 )
	2849	ENDIF
	2850	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2851	THEN
[215]	2852	message_string = 'inflow_disturbance_begin out of range'
[226]	2853	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2854	ENDIF
	2855	IF ( inflow_disturbance_end == -1 ) THEN
	2856	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2857	ENDIF
	2858	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2859	THEN
[215]	2860	message_string = 'inflow_disturbance_end out of range'
[226]	2861	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2862	ENDIF
	2863	ENDIF
	2864
[73]	2865	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2866	dist_nxr = nx - inflow_disturbance_begin
	2867	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2868	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2869	dist_nxl = inflow_disturbance_begin
	2870	dist_nxr(1) = inflow_disturbance_end
[73]	2871	ENDIF
	2872	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2873	dist_nyn = ny - inflow_disturbance_begin
	2874	dist_nys(1) = ny - inflow_disturbance_end
[73]	2875	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2876	dist_nys = inflow_disturbance_begin
	2877	dist_nyn(1) = inflow_disturbance_end
	2878	ENDIF
	2879
	2880	!
[151]	2881	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2882	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2883	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2884	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2885	'condition at the inflow boundary'
[226]	2886	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2887	ENDIF
	2888
	2889	!
	2890	!-- In case of turbulent inflow calculate the index of the recycling plane
	2891	IF ( turbulent_inflow ) THEN
	2892	IF ( recycling_width == 9999999.9 ) THEN
	2893	!
	2894	!-- Set the default value for the width of the recycling domain
	2895	recycling_width = 0.1 * nx * dx
	2896	ELSE
	2897	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2898	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2899	' ', recycling_width
[226]	2900	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	2901	ENDIF
	2902	ENDIF
	2903	!
	2904	!-- Calculate the index
	2905	recycling_plane = recycling_width / dx
	2906	ENDIF
	2907
	2908	!
[1]	2909	!-- Check random generator
	2910	IF ( random_generator /= 'system-specific' .AND. &
	2911	random_generator /= 'numerical-recipes' ) THEN
[215]	2912	message_string = 'unknown random generator: random_generator = "' // &
	2913	TRIM( random_generator ) // '"'
[226]	2914	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2915	ENDIF
	2916
	2917	!
	2918	!-- Determine damping level index for 1D model
	2919	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2920	IF ( damp_level_1d == -1.0 ) THEN
	2921	damp_level_1d = zu(nzt+1)
	2922	damp_level_ind_1d = nzt + 1
	2923	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2924	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2925	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	2926	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	2927	ELSE
	2928	DO k = 1, nzt+1
	2929	IF ( damp_level_1d <= zu(k) ) THEN
	2930	damp_level_ind_1d = k
	2931	EXIT
	2932	ENDIF
	2933	ENDDO
	2934	ENDIF
	2935	ENDIF
[215]	2936
[1]	2937	!
	2938	!-- Check some other 1d-model parameters
	2939	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2940	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2941	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2942	'" is unknown'
[226]	2943	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2944	ENDIF
	2945	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2946	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2947	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2948	'" is unknown'
[226]	2949	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2950	ENDIF
	2951
	2952	!
	2953	!-- Set time for the next user defined restart (time_restart is the
	2954	!-- internal parameter for steering restart events)
	2955	IF ( restart_time /= 9999999.9 ) THEN
[291]	2956	IF ( restart_time > time_since_reference_point ) THEN
	2957	time_restart = restart_time
	2958	ENDIF
[1]	2959	ELSE
	2960	!
	2961	!-- In case of a restart run, set internal parameter to default (no restart)
	2962	!-- if the NAMELIST-parameter restart_time is omitted
	2963	time_restart = 9999999.9
	2964	ENDIF
	2965
	2966	!
	2967	!-- Set default value of the time needed to terminate a model run
	2968	IF ( termination_time_needed == -1.0 ) THEN
	2969	IF ( host(1:3) == 'ibm' ) THEN
	2970	termination_time_needed = 300.0
	2971	ELSE
	2972	termination_time_needed = 35.0
	2973	ENDIF
	2974	ENDIF
	2975
	2976	!
	2977	!-- Check the time needed to terminate a model run
	2978	IF ( host(1:3) == 't3e' ) THEN
	2979	!
	2980	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2981	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2982	IF ( termination_time_needed <= 30.0 ) THEN
[215]	2983	WRITE( message_string, * ) 'termination_time_needed = ', &
	2984	termination_time_needed, ' must be > 30.0 on host "', &
	2985	TRIM( host ), '"'
[226]	2986	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	2987	ENDIF
	2988	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2989	!
	2990	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2991	!-- because the job time consumed before executing palm (for compiling,
	2992	!-- copying of files, etc.) has to be regarded
	2993	IF ( termination_time_needed < 300.0 ) THEN
[215]	2994	WRITE( message_string, * ) 'termination_time_needed = ', &
	2995	termination_time_needed, ' should be >= 300.0 on host "', &
	2996	TRIM( host ), '"'
[226]	2997	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	2998	ENDIF
	2999	ENDIF
	3000
[217]	3001	!
[240]	3002	!-- Check pressure gradient conditions
	3003	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3004	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3005	'w are .TRUE. but one of them must be .FALSE.'
[240]	3006	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3007	ENDIF
	3008	IF ( dp_external ) THEN
	3009	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3010	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3011	' of range'
	3012	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3013	ENDIF
	3014	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3015	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3016	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3017	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3018	ENDIF
	3019	ENDIF
	3020	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3021	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3022	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3023	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3024	ENDIF
[241]	3025	IF ( conserve_volume_flow ) THEN
	3026	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
	3027	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	3028	conserve_volume_flow_mode = 'inflow_profile'
	3029	ELSE
	3030	conserve_volume_flow_mode = 'initial_profiles'
	3031	ENDIF
	3032	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3033	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3034	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3035	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3036	conserve_volume_flow_mode
	3037	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3038	ENDIF
	3039	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
	3040	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
	3041	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
	3042	'require & conserve_volume_flow_mode = ''inflow_profile'''
	3043	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3044	ENDIF
	3045	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3046	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3047	WRITE( message_string, * ) 'cyclic boundary conditions ', &
	3048	'require & conserve_volume_flow_mode = ''initial_profiles''', &
	3049	' or ''bulk_velocity'''
	3050	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3051	ENDIF
	3052	ENDIF
	3053	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3054	( .NOT. conserve_volume_flow .OR. &
	3055	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3056	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
	3057	'conserve_volume_flow = .T. and & ', &
	3058	'conserve_volume_flow_mode = ''bulk_velocity'''
	3059	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3060	ENDIF
[240]	3061
	3062	!
[264]	3063	!-- Check particle attributes
	3064	IF ( particle_color /= 'none' ) THEN
	3065	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3066	particle_color /= 'z' ) THEN
	3067	message_string = 'illegal value for parameter particle_color: ' // &
	3068	TRIM( particle_color)
	3069	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3070	ELSE
	3071	IF ( color_interval(2) <= color_interval(1) ) THEN
	3072	message_string = 'color_interval(2) <= color_interval(1)'
	3073	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3074	ENDIF
	3075	ENDIF
	3076	ENDIF
	3077
	3078	IF ( particle_dvrpsize /= 'none' ) THEN
	3079	IF ( particle_dvrpsize /= 'absw' ) THEN
	3080	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3081	' ' // TRIM( particle_color)
	3082	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3083	ELSE
	3084	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3085	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3086	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3087	ENDIF
	3088	ENDIF
	3089	ENDIF
	3090
	3091	!
[217]	3092	!-- Check &userpar parameters
	3093	CALL user_check_parameters
[1]	3094
[217]	3095
[1]	3096	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |