Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 421

Last change on this file since 421 was 411, checked in by heinze, 15 years ago
Large scale vertical motion (subsidence/ascent) can be applied to the prognostic equation for the potential temperature
Property svn:keywords set to `Id`
File size: 121.3 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[407]	6	! Enabled passive scalar/humidity wall fluxes for non-flat topography
[411]	7	! Initialization of large scale vertical motion (subsidence/ascent)
[392]	8	!
[410]	9	! Branch revisions:
	10	! -----------------
	11	! Masked data output
	12	!
[392]	13	! Former revisions:
	14	! -----------------
	15	! $Id: check_parameters.f90 411 2009-12-11 14:15:58Z raasch $
	16	!
	17	! 388 2009-09-23 09:40:33Z raasch
[388]	18	! Check profiles fpr prho and hyp.
[376]	19	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	20	! interval has been set, respective error message is included
[366]	21	! bc_lr_cyc and bc_ns_cyc are set,
[328]	22	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	23	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	24	! Coupling with independent precursor runs.
[264]	25	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	26	! Bugfix: pressure included for profile output
[240]	27	! Check pressure gradient conditions
[256]	28	! topography_grid_convention moved from user_check_parameters
	29	! 'single_street_canyon'
[367]	30	! Added shf* and qsws* to the list of available output data
[226]	31	!
	32	! 222 2009-01-12 16:04:16Z letzel
[217]	33	! +user_check_parameters
[213]	34	! Output of messages replaced by message handling routine.
[206]	35	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	36	! deleted __mpi2 directives
[222]	37	! Check that PALM is called with mrun -K parallel for coupling
[198]	38	!
	39	! 197 2008-09-16 15:29:03Z raasch
[177]	40	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	41	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	42	!
	43	! Strict grid matching along z is not needed for mg-solver.
[153]	44	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	45	! Case of reading data for recycling included in initializing_actions,
[197]	46	! check of turbulent_inflow and calculation of recycling_plane.
	47	! q*2 profile added
[139]	48	!
	49	! 138 2007-11-28 10:03:58Z letzel
[138]	50	! Plant canopy added
[132]	51	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	52	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	53	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	54	!
	55	! 109 2007-08-28 15:26:47Z letzel
[102]	56	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	57	! conditions for temperature and fluxes) in case of coupled runs.
	58	! +profiles for wp and w"e
[104]	59	! Bugfix: Error message concerning output of particle concentration (pc)
	60	! modified
[108]	61	! More checks and more default values for coupled runs
	62	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	63	! cloud_physics = .T.)
	64	! Rayleigh damping for ocean fixed.
[109]	65	! Check and, if necessary, set default value for dt_coupling
[98]	66	!
	67	! 97 2007-06-21 08:23:15Z raasch
[97]	68	! Initial salinity profile is calculated, salinity boundary conditions are
	69	! checked,
[94]	70	! z_max_do1d is checked only in case of ocean = .f.,
[97]	71	! +initial temperature and geostrophic velocity profiles for the ocean version,
	72	! use_pt_reference renamed use_reference
[77]	73	!
[90]	74	! 89 2007-05-25 12:08:31Z raasch
	75	! Check for user-defined profiles
	76	!
[77]	77	! 75 2007-03-22 09:54:05Z raasch
[51]	78	! "by_user" allowed as initializing action, -data_output_ts,
[63]	79	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	80	! and pt_reference are checked, moisture renamed humidity,
[72]	81	! output of precipitation amount/rate and roughnes length + check
[73]	82	! possible negative humidities are avoided in initial profile,
[75]	83	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	84	! revision added to run_description_header
[1]	85	!
[39]	86	! 20 2007-02-26 00:12:32Z raasch
	87	! Temperature and humidity gradients at top are now calculated for nzt+1,
	88	! top_heatflux and respective boundary condition bc_pt_t is checked
	89	!
[3]	90	! RCS Log replace by Id keyword, revision history cleaned up
	91	!
[1]	92	! Revision 1.61 2006/08/04 14:20:25 raasch
	93	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	94	! use_upstream_for_tke, default value for dt_dopts,
	95	! generation of file header moved from routines palm and header to here
	96	!
	97	! Revision 1.1 1997/08/26 06:29:23 raasch
	98	! Initial revision
	99	!
	100	!
	101	! Description:
	102	! ------------
	103	! Check control parameters and deduce further quantities.
	104	!------------------------------------------------------------------------------!
	105
	106	USE arrays_3d
	107	USE constants
	108	USE control_parameters
[264]	109	USE dvrp_variables
[1]	110	USE grid_variables
	111	USE indices
	112	USE model_1d
	113	USE netcdf_control
	114	USE particle_attributes
	115	USE pegrid
	116	USE profil_parameter
[411]	117	USE subsidence_mod
[1]	118	USE statistics
	119	USE transpose_indices
	120
	121	IMPLICIT NONE
	122
	123	CHARACTER (LEN=1) :: sq
	124	CHARACTER (LEN=6) :: var
	125	CHARACTER (LEN=7) :: unit
	126	CHARACTER (LEN=8) :: date
	127	CHARACTER (LEN=10) :: time
[102]	128	CHARACTER (LEN=40) :: coupling_string
[1]	129	CHARACTER (LEN=100) :: action
	130
[108]	131	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	132	position, prec
[1]	133	LOGICAL :: found, ldum
[291]	134	REAL :: gradient, maxn, maxp, remote = 0.0, &
	135	simulation_time_since_reference
[1]	136
	137	!
	138	!-- Warning, if host is not set
	139	IF ( host(1:1) == ' ' ) THEN
[213]	140	message_string = '"host" is not set. Please check that environment ' // &
	141	'variable "localhost" & is set before running PALM'
[226]	142	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	143	ENDIF
	144
	145	!
[102]	146	!-- Check the coupling mode
	147	IF ( coupling_mode /= 'uncoupled' .AND. &
	148	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	149	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	150	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	151	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	152	ENDIF
	153
	154	!
[108]	155	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	156	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	157
[108]	158	IF ( dt_coupling == 9999999.9 ) THEN
[213]	159	message_string = 'dt_coupling is not set but required for coup' // &
	160	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	161	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	162	ENDIF
[213]	163
[206]	164	#if defined( __parallel )
	165	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	166	ierr )
	167	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	168	status, ierr )
[108]	169	IF ( dt_coupling /= remote ) THEN
[213]	170	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	171	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	172	'dt_coupling_remote = ', remote
[226]	173	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	174	ENDIF
[109]	175	IF ( dt_coupling <= 0.0 ) THEN
[206]	176	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	177	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	178	status, ierr )
[109]	179	dt_coupling = MAX( dt_max, remote )
[213]	180	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	181	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	182	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	183	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	184	ENDIF
[213]	185
[206]	186	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	187	ierr )
	188	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	189	status, ierr )
[108]	190	IF ( restart_time /= remote ) THEN
[213]	191	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	192	'": restart_time = ', restart_time, '& is not equal to ', &
	193	'restart_time_remote = ', remote
[226]	194	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	195	ENDIF
[213]	196
[206]	197	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	198	ierr )
	199	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	200	status, ierr )
[108]	201	IF ( dt_restart /= remote ) THEN
[213]	202	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	203	'": dt_restart = ', dt_restart, '& is not equal to ', &
	204	'dt_restart_remote = ', remote
[226]	205	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	206	ENDIF
[213]	207
[291]	208	simulation_time_since_reference = end_time - coupling_start_time
	209	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	210	14, comm_inter, ierr )
[206]	211	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	212	status, ierr )
[291]	213	IF ( simulation_time_since_reference /= remote ) THEN
[213]	214	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	215	'": simulation_time_since_reference = ', &
	216	simulation_time_since_reference, '& is not equal to ', &
	217	'simulation_time_since_reference_remote = ', remote
[226]	218	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	219	ENDIF
[213]	220
[206]	221	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	222	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	223	status, ierr )
[108]	224	IF ( dx /= remote ) THEN
[213]	225	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	226	'": dx = ', dx, '& is not equal to dx_remote = ', remote
[226]	227	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
[108]	228	ENDIF
[213]	229
[206]	230	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	231	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	232	status, ierr )
[108]	233	IF ( dy /= remote ) THEN
[213]	234	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	235	'": dy = ', dy, '& is not equal to dy_remote = ', remote
[226]	236	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
[108]	237	ENDIF
[213]	238
[206]	239	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	240	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	241	status, ierr )
[108]	242	IF ( nx /= iremote ) THEN
[213]	243	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	244	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
[226]	245	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
[108]	246	ENDIF
[213]	247
[206]	248	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	249	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	250	status, ierr )
[108]	251	IF ( ny /= iremote ) THEN
[213]	252	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	253	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
[226]	254	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
[108]	255	ENDIF
[222]	256	#else
	257	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	258	' ''mrun -K parallel'''
[226]	259	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	260	#endif
	261	ENDIF
	262
[206]	263	#if defined( __parallel )
[108]	264	!
	265	!-- Exchange via intercommunicator
	266	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	267	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	268	ierr )
[108]	269	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	270	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	271	comm_inter, status, ierr )
[108]	272	ENDIF
	273	#endif
	274
	275
	276	!
[1]	277	!-- Generate the file header which is used as a header for most of PALM's
	278	!-- output files
	279	CALL DATE_AND_TIME( date, time )
	280	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	281	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	282	IF ( coupling_mode == 'uncoupled' ) THEN
	283	coupling_string = ''
	284	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	285	coupling_string = ' coupled (atmosphere)'
	286	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	287	coupling_string = ' coupled (ocean)'
	288	ENDIF
[1]	289
[102]	290	WRITE ( run_description_header, &
	291	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	292	TRIM( version ), TRIM( revision ), 'run: ', &
	293	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	294	'host: ', TRIM( host ), run_date, run_time
[1]	295
	296	!
[63]	297	!-- Check the general loop optimization method
	298	IF ( loop_optimization == 'default' ) THEN
	299	IF ( host(1:3) == 'nec' ) THEN
	300	loop_optimization = 'vector'
	301	ELSE
	302	loop_optimization = 'cache'
	303	ENDIF
	304	ENDIF
	305	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	306	.AND. loop_optimization /= 'vector' ) THEN
[213]	307	message_string = 'illegal value given for loop_optimization: "' // &
	308	TRIM( loop_optimization ) // '"'
[226]	309	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	310	ENDIF
	311
	312	!
[1]	313	!-- Check topography setting (check for illegal parameter combinations)
	314	IF ( topography /= 'flat' ) THEN
	315	action = ' '
	316	IF ( scalar_advec /= 'pw-scheme' ) THEN
	317	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	318	ENDIF
	319	IF ( momentum_advec /= 'pw-scheme' ) THEN
	320	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	321	ENDIF
[51]	322	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	323	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	324	ENDIF
[114]	325	IF ( psolver == 'sor' ) THEN
[1]	326	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	327	ENDIF
	328	IF ( sloping_surface ) THEN
	329	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	330	ENDIF
	331	IF ( galilei_transformation ) THEN
	332	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	333	ENDIF
	334	IF ( cloud_physics ) THEN
	335	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	336	ENDIF
	337	IF ( cloud_droplets ) THEN
	338	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	339	ENDIF
	340	IF ( .NOT. prandtl_layer ) THEN
	341	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	342	ENDIF
	343	IF ( action /= ' ' ) THEN
[213]	344	message_string = 'a non-flat topography does not allow ' // &
	345	TRIM( action )
[226]	346	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	347	ENDIF
[256]	348	!
	349	!-- In case of non-flat topography, check whether the convention how to
	350	!-- define the topography grid has been set correctly, or whether the default
	351	!-- is applicable. If this is not possible, abort.
	352	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	353	IF ( TRIM( topography ) /= 'single_building' .AND. &
	354	TRIM( topography ) /= 'single_street_canyon' .AND. &
	355	TRIM( topography ) /= 'read_from_file' ) THEN
	356	!-- The default value is not applicable here, because it is only valid
	357	!-- for the two standard cases 'single_building' and 'read_from_file'
	358	!-- defined in init_grid.
	359	WRITE( message_string, * ) &
	360	'The value for "topography_grid_convention" ', &
	361	'is not set. Its default value is & only valid for ', &
	362	'"topography" = ''single_building'', ', &
	363	'''single_street_canyon'' & or ''read_from_file''.', &
	364	' & Choose ''cell_edge'' or ''cell_center''.'
	365	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	366	ELSE
	367	!-- The default value is applicable here.
	368	!-- Set convention according to topography.
	369	IF ( TRIM( topography ) == 'single_building' .OR. &
	370	TRIM( topography ) == 'single_street_canyon' ) THEN
	371	topography_grid_convention = 'cell_edge'
	372	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	373	topography_grid_convention = 'cell_center'
	374	ENDIF
	375	ENDIF
	376	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	377	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	378	WRITE( message_string, * ) &
	379	'The value for "topography_grid_convention" is ', &
	380	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	381	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	382	ENDIF
	383
[1]	384	ENDIF
[94]	385
[1]	386	!
[94]	387	!-- Check ocean setting
	388	IF ( ocean ) THEN
[332]	389
[94]	390	action = ' '
	391	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	392	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	393	ENDIF
[97]	394	IF ( momentum_advec == 'ups-scheme' ) THEN
	395	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	396	ENDIF
[94]	397	IF ( action /= ' ' ) THEN
[213]	398	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	399	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	400	ENDIF
	401
[332]	402	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	403	TRIM( coupling_char ) == '_O' ) THEN
[343]	404
[94]	405	!
[332]	406	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	407	!-- ocean run (this setting is done via mrun-option -y)
[343]	408
[291]	409	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	410	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	411	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	412
[291]	413	ENDIF
	414
	415	!
[1]	416	!-- Check whether there are any illegal values
	417	!-- Pressure solver:
	418	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	419	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	420	message_string = 'unknown solver for perturbation pressure: psolver' // &
	421	' = "' // TRIM( psolver ) // '"'
[226]	422	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	423	ENDIF
	424
	425	#if defined( __parallel )
	426	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	427	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	428	'for a 1d domain-decomposition along x & please do' // &
	429	' not set npey/=1 in the parameter file'
[226]	430	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	431	ENDIF
[181]	432	IF ( psolver == 'poisfft_hybrid' .AND. &
	433	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	434	psolver == 'multigrid' .AND. &
	435	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	436	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	437	'work for subdomains with unequal size & please ' // &
	438	'set grid_matching = ''strict'' in the parameter file'
[226]	439	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	440	ENDIF
	441	#else
	442	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	443	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	444	' for a parallel environment'
[226]	445	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	446	ENDIF
	447	#endif
	448
	449	IF ( psolver == 'multigrid' ) THEN
	450	IF ( cycle_mg == 'w' ) THEN
	451	gamma_mg = 2
	452	ELSEIF ( cycle_mg == 'v' ) THEN
	453	gamma_mg = 1
	454	ELSE
[213]	455	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	456	TRIM( cycle_mg ) // '"'
[226]	457	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	458	ENDIF
	459	ENDIF
	460
	461	IF ( fft_method /= 'singleton-algorithm' .AND. &
	462	fft_method /= 'temperton-algorithm' .AND. &
	463	fft_method /= 'system-specific' ) THEN
[213]	464	message_string = 'unknown fft-algorithm: fft_method = "' // &
	465	TRIM( fft_method ) // '"'
[226]	466	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	467	ENDIF
	468
	469	!
	470	!-- Advection schemes:
	471	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	472	THEN
[214]	473	message_string = 'unknown advection scheme: momentum_advec = "' // &
	474	TRIM( momentum_advec ) // '"'
[226]	475	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	476	ENDIF
	477	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	478	.AND. timestep_scheme /= 'euler' ) THEN
[214]	479	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	480	'" is not allowed with timestep_scheme = "' // &
	481	TRIM( timestep_scheme ) // '"'
[226]	482	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	483	ENDIF
	484
	485	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	486	scalar_advec /= 'ups-scheme' ) THEN
[214]	487	message_string = 'unknown advection scheme: scalar_advec = "' // &
	488	TRIM( scalar_advec ) // '"'
[226]	489	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	490	ENDIF
	491
	492	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	493	use_upstream_for_tke = .TRUE.
[214]	494	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	495	'use_sgs_for_particles = .TRUE.'
[226]	496	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	497	ENDIF
	498
	499	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	500	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	501	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	502	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	503	ENDIF
	504
	505	!
	506	!-- Timestep schemes:
	507	SELECT CASE ( TRIM( timestep_scheme ) )
	508
	509	CASE ( 'euler' )
	510	intermediate_timestep_count_max = 1
	511	asselin_filter_factor = 0.0
	512
	513	CASE ( 'leapfrog', 'leapfrog+euler' )
	514	intermediate_timestep_count_max = 1
	515
	516	CASE ( 'runge-kutta-2' )
	517	intermediate_timestep_count_max = 2
	518	asselin_filter_factor = 0.0
	519
	520	CASE ( 'runge-kutta-3' )
	521	intermediate_timestep_count_max = 3
	522	asselin_filter_factor = 0.0
	523
	524	CASE DEFAULT
[214]	525	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	526	TRIM( timestep_scheme ) // '"'
[226]	527	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	528
	529	END SELECT
	530
[63]	531	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	532	THEN
[214]	533	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	534	'" & does not work with timestep_scheme "' // &
	535	TRIM( timestep_scheme ) // '"'
[226]	536	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	537	ENDIF
	538
	539	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	540	THEN
[214]	541	message_string = 'momentum advection scheme "' // &
	542	TRIM( momentum_advec ) // '" & does not work with ' // &
	543	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	544	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	545	ENDIF
	546
[147]	547	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	548	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	549	!
[214]	550	!-- No restart run: several initialising actions are possible
[1]	551	action = initializing_actions
	552	DO WHILE ( TRIM( action ) /= '' )
	553	position = INDEX( action, ' ' )
	554	SELECT CASE ( action(1:position-1) )
	555
	556	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	557	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	558	action = action(position+1:)
	559
	560	CASE DEFAULT
[214]	561	message_string = 'initializing_action = "' // &
	562	TRIM( action ) // '" unkown or not allowed'
[226]	563	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	564
	565	END SELECT
	566	ENDDO
	567	ENDIF
[214]	568
[1]	569	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	570	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	571	message_string = 'initializing_actions = "set_constant_profiles"' // &
	572	' and "set_1d-model_profiles" are not allowed ' // &
	573	'simultaneously'
[226]	574	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	575	ENDIF
[214]	576
[46]	577	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	578	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	579	message_string = 'initializing_actions = "set_constant_profiles"' // &
	580	' and "by_user" are not allowed simultaneously'
[226]	581	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	582	ENDIF
[214]	583
[46]	584	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	585	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	586	message_string = 'initializing_actions = "by_user" and ' // &
	587	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	588	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	589	ENDIF
[1]	590
[75]	591	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	592	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	593	'not allowed with humidity = ', humidity
[226]	594	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	595	ENDIF
	596
[72]	597	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	598	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	599	'not allowed with cloud_physics = ', cloud_physics
[226]	600	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	601	ENDIF
	602
[75]	603	IF ( humidity .AND. sloping_surface ) THEN
[214]	604	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	605	'are not allowed simultaneously'
[226]	606	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	607	ENDIF
	608
[75]	609	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	610	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	611	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	612	ENDIF
	613
[75]	614	IF ( passive_scalar .AND. humidity ) THEN
[214]	615	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	616	'is not allowed simultaneously'
[226]	617	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	618	ENDIF
	619
	620	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	621	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	622	' = .TRUE.'
[226]	623	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	624	ENDIF
	625
	626	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	627	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	628	'" found for parameter grid_matching'
[226]	629	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	630	ENDIF
	631
[138]	632	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	633	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	634	'coefficient & given value is drag_coefficient = 0.0'
[226]	635	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	636	ENDIF
	637
[1]	638	!
	639	!-- In case of no model continuation run, check initialising parameters and
	640	!-- deduce further quantities
	641	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	642
	643	!
	644	!-- Initial profiles for 1D and 3D model, respectively
	645	u_init = ug_surface
	646	v_init = vg_surface
	647	pt_init = pt_surface
[94]	648	IF ( humidity ) q_init = q_surface
	649	IF ( ocean ) sa_init = sa_surface
	650	IF ( passive_scalar ) q_init = s_surface
[138]	651	IF ( plant_canopy ) lad = 0.0
[1]	652
	653	!
	654	!--
	655	!-- If required, compute initial profile of the geostrophic wind
	656	!-- (component ug)
	657	i = 1
	658	gradient = 0.0
[97]	659
	660	IF ( .NOT. ocean ) THEN
	661
	662	ug_vertical_gradient_level_ind(1) = 0
	663	ug(0) = ug_surface
	664	DO k = 1, nzt+1
[177]	665	IF ( i < 11 ) THEN
	666	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	667	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	668	gradient = ug_vertical_gradient(i) / 100.0
	669	ug_vertical_gradient_level_ind(i) = k - 1
	670	i = i + 1
[1]	671	ENDIF
[177]	672	ENDIF
[97]	673	IF ( gradient /= 0.0 ) THEN
	674	IF ( k /= 1 ) THEN
	675	ug(k) = ug(k-1) + dzu(k) * gradient
	676	ELSE
	677	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	678	ENDIF
[1]	679	ELSE
[97]	680	ug(k) = ug(k-1)
[1]	681	ENDIF
[97]	682	ENDDO
[1]	683
[97]	684	ELSE
	685
	686	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	687	ug(nzt+1) = ug_surface
[97]	688	DO k = nzt, 0, -1
[177]	689	IF ( i < 11 ) THEN
	690	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	691	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	692	gradient = ug_vertical_gradient(i) / 100.0
	693	ug_vertical_gradient_level_ind(i) = k + 1
	694	i = i + 1
[97]	695	ENDIF
	696	ENDIF
	697	IF ( gradient /= 0.0 ) THEN
	698	IF ( k /= nzt ) THEN
	699	ug(k) = ug(k+1) - dzu(k+1) * gradient
	700	ELSE
	701	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	702	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	703	ENDIF
	704	ELSE
	705	ug(k) = ug(k+1)
	706	ENDIF
	707	ENDDO
	708
	709	ENDIF
	710
[1]	711	u_init = ug
	712
	713	!
	714	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	715	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	716	ug_vertical_gradient_level(1) = 0.0
	717	ENDIF
	718
	719	!
	720	!--
	721	!-- If required, compute initial profile of the geostrophic wind
	722	!-- (component vg)
	723	i = 1
	724	gradient = 0.0
[97]	725
	726	IF ( .NOT. ocean ) THEN
	727
	728	vg_vertical_gradient_level_ind(1) = 0
	729	vg(0) = vg_surface
	730	DO k = 1, nzt+1
[177]	731	IF ( i < 11 ) THEN
	732	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	733	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	734	gradient = vg_vertical_gradient(i) / 100.0
	735	vg_vertical_gradient_level_ind(i) = k - 1
	736	i = i + 1
[1]	737	ENDIF
	738	ENDIF
[97]	739	IF ( gradient /= 0.0 ) THEN
	740	IF ( k /= 1 ) THEN
	741	vg(k) = vg(k-1) + dzu(k) * gradient
	742	ELSE
	743	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	744	ENDIF
[1]	745	ELSE
[97]	746	vg(k) = vg(k-1)
[1]	747	ENDIF
[97]	748	ENDDO
[1]	749
[97]	750	ELSE
	751
[121]	752	vg_vertical_gradient_level_ind(1) = nzt+1
	753	vg(nzt+1) = vg_surface
[97]	754	DO k = nzt, 0, -1
[177]	755	IF ( i < 11 ) THEN
	756	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	757	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	758	gradient = vg_vertical_gradient(i) / 100.0
	759	vg_vertical_gradient_level_ind(i) = k + 1
	760	i = i + 1
[97]	761	ENDIF
	762	ENDIF
	763	IF ( gradient /= 0.0 ) THEN
	764	IF ( k /= nzt ) THEN
	765	vg(k) = vg(k+1) - dzu(k+1) * gradient
	766	ELSE
	767	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	768	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	769	ENDIF
	770	ELSE
	771	vg(k) = vg(k+1)
	772	ENDIF
	773	ENDDO
	774
	775	ENDIF
	776
[1]	777	v_init = vg
	778
	779	!
	780	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	781	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	782	vg_vertical_gradient_level(1) = 0.0
	783	ENDIF
	784
	785	!
[94]	786	!-- Compute initial temperature profile using the given temperature gradients
[1]	787	i = 1
	788	gradient = 0.0
[94]	789
	790	IF ( .NOT. ocean ) THEN
	791
	792	pt_vertical_gradient_level_ind(1) = 0
	793	DO k = 1, nzt+1
[177]	794	IF ( i < 11 ) THEN
	795	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	796	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	797	gradient = pt_vertical_gradient(i) / 100.0
	798	pt_vertical_gradient_level_ind(i) = k - 1
	799	i = i + 1
[1]	800	ENDIF
	801	ENDIF
[94]	802	IF ( gradient /= 0.0 ) THEN
	803	IF ( k /= 1 ) THEN
	804	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	805	ELSE
	806	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	807	ENDIF
[1]	808	ELSE
[94]	809	pt_init(k) = pt_init(k-1)
[1]	810	ENDIF
[94]	811	ENDDO
[1]	812
[94]	813	ELSE
	814
	815	pt_vertical_gradient_level_ind(1) = nzt+1
	816	DO k = nzt, 0, -1
[177]	817	IF ( i < 11 ) THEN
	818	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	819	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	820	gradient = pt_vertical_gradient(i) / 100.0
	821	pt_vertical_gradient_level_ind(i) = k + 1
	822	i = i + 1
[94]	823	ENDIF
	824	ENDIF
	825	IF ( gradient /= 0.0 ) THEN
	826	IF ( k /= nzt ) THEN
	827	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	828	ELSE
	829	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	830	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	831	ENDIF
	832	ELSE
	833	pt_init(k) = pt_init(k+1)
	834	ENDIF
	835	ENDDO
	836
	837	ENDIF
	838
[1]	839	!
	840	!-- In case of no given temperature gradients, choose gradient of neutral
	841	!-- stratification
[94]	842	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	843	pt_vertical_gradient_level(1) = 0.0
	844	ENDIF
	845
	846	!
[94]	847	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	848	!-- boundary condition
[19]	849	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	850
	851	!
	852	!-- If required, compute initial humidity or scalar profile using the given
	853	!-- humidity/scalar gradient. In case of scalar transport, initially store
	854	!-- values of the scalar parameters on humidity parameters
	855	IF ( passive_scalar ) THEN
	856	bc_q_b = bc_s_b
	857	bc_q_t = bc_s_t
	858	q_surface = s_surface
	859	q_surface_initial_change = s_surface_initial_change
	860	q_vertical_gradient = s_vertical_gradient
	861	q_vertical_gradient_level = s_vertical_gradient_level
	862	surface_waterflux = surface_scalarflux
[407]	863	wall_humidityflux = wall_scalarflux
[1]	864	ENDIF
	865
[75]	866	IF ( humidity .OR. passive_scalar ) THEN
[1]	867
	868	i = 1
	869	gradient = 0.0
	870	q_vertical_gradient_level_ind(1) = 0
	871	DO k = 1, nzt+1
[177]	872	IF ( i < 11 ) THEN
	873	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	874	q_vertical_gradient_level(i) >= 0.0 ) THEN
	875	gradient = q_vertical_gradient(i) / 100.0
	876	q_vertical_gradient_level_ind(i) = k - 1
	877	i = i + 1
[1]	878	ENDIF
	879	ENDIF
	880	IF ( gradient /= 0.0 ) THEN
	881	IF ( k /= 1 ) THEN
	882	q_init(k) = q_init(k-1) + dzu(k) * gradient
	883	ELSE
	884	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	885	ENDIF
	886	ELSE
	887	q_init(k) = q_init(k-1)
	888	ENDIF
[72]	889	!
	890	!-- Avoid negative humidities
	891	IF ( q_init(k) < 0.0 ) THEN
	892	q_init(k) = 0.0
	893	ENDIF
[1]	894	ENDDO
	895
	896	!
	897	!-- In case of no given humidity gradients, choose zero gradient
	898	!-- conditions
	899	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	900	q_vertical_gradient_level(1) = 0.0
	901	ENDIF
	902
	903	!
	904	!-- Store humidity gradient at the top boundary for possile Neumann
	905	!-- boundary condition
[19]	906	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	907
	908	ENDIF
	909
[94]	910	!
	911	!-- If required, compute initial salinity profile using the given salinity
	912	!-- gradients
	913	IF ( ocean ) THEN
	914
	915	i = 1
	916	gradient = 0.0
	917
	918	sa_vertical_gradient_level_ind(1) = nzt+1
	919	DO k = nzt, 0, -1
[177]	920	IF ( i < 11 ) THEN
	921	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	922	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	923	gradient = sa_vertical_gradient(i) / 100.0
	924	sa_vertical_gradient_level_ind(i) = k + 1
	925	i = i + 1
[94]	926	ENDIF
	927	ENDIF
	928	IF ( gradient /= 0.0 ) THEN
	929	IF ( k /= nzt ) THEN
	930	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	931	ELSE
	932	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	933	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	934	ENDIF
	935	ELSE
	936	sa_init(k) = sa_init(k+1)
	937	ENDIF
	938	ENDDO
	939
	940	ENDIF
	941
[138]	942	!
[388]	943	!-- If required compute the profile of leaf area density used in the plant
	944	!-- canopy model
[138]	945	IF ( plant_canopy ) THEN
	946
	947	i = 1
	948	gradient = 0.0
[1]	949
[138]	950	IF ( .NOT. ocean ) THEN
[153]	951
	952	lad(0) = lad_surface
[138]	953
	954	lad_vertical_gradient_level_ind(1) = 0
	955	DO k = 1, pch_index
[177]	956	IF ( i < 11 ) THEN
	957	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	958	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	959	gradient = lad_vertical_gradient(i)
	960	lad_vertical_gradient_level_ind(i) = k - 1
	961	i = i + 1
[138]	962	ENDIF
	963	ENDIF
	964	IF ( gradient /= 0.0 ) THEN
	965	IF ( k /= 1 ) THEN
	966	lad(k) = lad(k-1) + dzu(k) * gradient
	967	ELSE
	968	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	969	ENDIF
	970	ELSE
	971	lad(k) = lad(k-1)
	972	ENDIF
	973	ENDDO
	974
	975	ENDIF
	976
[1]	977	!
[388]	978	!-- In case of no given leaf area density gradients, choose a vanishing
	979	!-- gradient
[138]	980	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	981	lad_vertical_gradient_level(1) = 0.0
	982	ENDIF
	983
	984	ENDIF
	985
	986	ENDIF
[411]	987
	988	!
	989	!-- Initialize large scale subsidence if required
	990	IF ( ws_vertical_gradient_level(1) /= -9999999.9 ) THEN
	991	large_scale_subsidence = .TRUE.
	992	CALL init_w_subsidence
	993	END IF
	994
[138]	995
	996	!
[1]	997	!-- Compute Coriolis parameter
	998	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	999	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1000
	1001	!
[97]	1002	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1003	!-- set the reference temperature equal to the surface temperature.
	1004	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1005
	1006	!
[97]	1007	!-- Reference value has to be used in buoyancy terms
	1008	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1009
	1010	!
	1011	!-- Sign of buoyancy/stability terms
	1012	IF ( ocean ) atmos_ocean_sign = -1.0
	1013
	1014	!
[108]	1015	!-- Ocean version must use flux boundary conditions at the top
	1016	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1017	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1018	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1019	ENDIF
[97]	1020
	1021	!
[1]	1022	!-- In case of a given slope, compute the relevant quantities
	1023	IF ( alpha_surface /= 0.0 ) THEN
	1024	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1025	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1026	' ) must be < 90.0'
[226]	1027	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1028	ENDIF
	1029	sloping_surface = .TRUE.
	1030	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1031	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1032	ENDIF
	1033
	1034	!
	1035	!-- Check time step and cfl_factor
	1036	IF ( dt /= -1.0 ) THEN
	1037	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1038	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1039	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1040	ENDIF
	1041	dt_3d = dt
	1042	dt_fixed = .TRUE.
	1043	ENDIF
	1044
	1045	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1046	IF ( cfl_factor == -1.0 ) THEN
	1047	IF ( momentum_advec == 'ups-scheme' .OR. &
	1048	scalar_advec == 'ups-scheme' ) THEN
	1049	cfl_factor = 0.8
	1050	ELSE
	1051	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1052	cfl_factor = 0.8
	1053	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1054	cfl_factor = 0.9
	1055	ELSE
	1056	cfl_factor = 0.1
	1057	ENDIF
	1058	ENDIF
	1059	ELSE
[215]	1060	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1061	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1062	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1063	ENDIF
	1064	ENDIF
	1065
	1066	!
	1067	!-- Store simulated time at begin
	1068	simulated_time_at_begin = simulated_time
	1069
	1070	!
[291]	1071	!-- Store reference time for coupled runs and change the coupling flag,
	1072	!-- if ...
	1073	IF ( simulated_time == 0.0 ) THEN
	1074	IF ( coupling_start_time == 0.0 ) THEN
	1075	time_since_reference_point = 0.0
	1076	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1077	run_coupled = .FALSE.
	1078	ENDIF
	1079	ENDIF
	1080
	1081	!
[1]	1082	!-- Set wind speed in the Galilei-transformed system
	1083	IF ( galilei_transformation ) THEN
	1084	IF ( use_ug_for_galilei_tr .AND. &
	1085	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1086	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1087	u_gtrans = ug_surface
	1088	v_gtrans = vg_surface
	1089	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1090	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1091	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1092	' with galilei transformation'
[226]	1093	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1094	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1095	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1096	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1097	' with galilei transformation'
[226]	1098	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1099	ELSE
[215]	1100	message_string = 'variable translation speed used for galilei-' // &
	1101	'transformation, which may cause & instabilities in stably ' // &
	1102	'stratified regions'
[226]	1103	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1104	ENDIF
	1105	ENDIF
	1106
	1107	!
	1108	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1109	!-- fluxes have to be used in the diffusion-terms
	1110	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1111
	1112	!
	1113	!-- Check boundary conditions and set internal variables:
	1114	!-- Lateral boundary conditions
[73]	1115	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1116	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1117	message_string = 'unknown boundary condition: bc_lr = "' // &
	1118	TRIM( bc_lr ) // '"'
[226]	1119	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1120	ENDIF
[73]	1121	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1122	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1123	message_string = 'unknown boundary condition: bc_ns = "' // &
	1124	TRIM( bc_ns ) // '"'
[226]	1125	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1126	ENDIF
	1127
	1128	!
[366]	1129	!-- Internal variables used for speed optimization in if clauses
	1130	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1131	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1132
	1133	!
[1]	1134	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1135	!-- Willimas advection scheme. Several schemes and tools do not work with
	1136	!-- non-cyclic boundary conditions.
	1137	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1138	IF ( psolver /= 'multigrid' ) THEN
[215]	1139	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1140	'psolver = "' // TRIM( psolver ) // '"'
[226]	1141	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1142	ENDIF
	1143	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1144	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1145	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1146	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1147	ENDIF
	1148	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1149	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1150	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1151	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1152	ENDIF
	1153	IF ( galilei_transformation ) THEN
[215]	1154	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1155	'galilei_transformation = .T.'
[226]	1156	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1157	ENDIF
	1158	ENDIF
	1159
	1160	!
	1161	!-- Bottom boundary condition for the turbulent Kinetic energy
	1162	IF ( bc_e_b == 'neumann' ) THEN
	1163	ibc_e_b = 1
	1164	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1165	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1166	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1167	ENDIF
	1168	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1169	ibc_e_b = 2
	1170	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1171	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1172	TRIM( bc_e_b ) // '"'
[226]	1173	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1174	ENDIF
	1175	IF ( .NOT. prandtl_layer ) THEN
	1176	bc_e_b = 'neumann'
	1177	ibc_e_b = 1
[215]	1178	message_string = 'boundary condition bc_e_b changed to "' // &
	1179	TRIM( bc_e_b ) // '"'
[226]	1180	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1181	ENDIF
	1182	ELSE
[215]	1183	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1184	TRIM( bc_e_b ) // '"'
[226]	1185	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1186	ENDIF
	1187
	1188	!
	1189	!-- Boundary conditions for perturbation pressure
	1190	IF ( bc_p_b == 'dirichlet' ) THEN
	1191	ibc_p_b = 0
	1192	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1193	ibc_p_b = 1
	1194	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1195	ibc_p_b = 2
	1196	ELSE
[215]	1197	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1198	TRIM( bc_p_b ) // '"'
[226]	1199	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1200	ENDIF
	1201	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1202	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1203	'" not allowed with prandtl_layer = .FALSE.'
[226]	1204	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1205	ENDIF
	1206	IF ( bc_p_t == 'dirichlet' ) THEN
	1207	ibc_p_t = 0
	1208	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1209	ibc_p_t = 1
	1210	ELSE
[215]	1211	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1212	TRIM( bc_p_t ) // '"'
[226]	1213	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1214	ENDIF
	1215
	1216	!
	1217	!-- Boundary conditions for potential temperature
[102]	1218	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1219	ibc_pt_b = 2
[1]	1220	ELSE
[102]	1221	IF ( bc_pt_b == 'dirichlet' ) THEN
	1222	ibc_pt_b = 0
	1223	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1224	ibc_pt_b = 1
	1225	ELSE
[215]	1226	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1227	TRIM( bc_pt_b ) // '"'
[226]	1228	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1229	ENDIF
	1230	ENDIF
[102]	1231
[1]	1232	IF ( bc_pt_t == 'dirichlet' ) THEN
	1233	ibc_pt_t = 0
	1234	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1235	ibc_pt_t = 1
[19]	1236	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1237	ibc_pt_t = 2
[1]	1238	ELSE
[215]	1239	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1240	TRIM( bc_pt_t ) // '"'
[226]	1241	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1242	ENDIF
	1243
[20]	1244	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1245	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1246	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1247	top_momentumflux_v /= 9999999.9 ) THEN
	1248	constant_top_momentumflux = .TRUE.
	1249	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1250	top_momentumflux_v == 9999999.9 ) ) THEN
	1251	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1252	'must be set'
[226]	1253	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1254	ENDIF
[1]	1255
	1256	!
	1257	!-- A given surface temperature implies Dirichlet boundary condition for
	1258	!-- temperature. In this case specification of a constant heat flux is
	1259	!-- forbidden.
	1260	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1261	surface_heatflux /= 0.0 ) THEN
[215]	1262	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1263	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1264	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1265	ENDIF
	1266	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1267	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1268	'wed with pt_surface_initial_change (/=0) = ', &
	1269	pt_surface_initial_change
[226]	1270	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1271	ENDIF
	1272
	1273	!
[19]	1274	!-- A given temperature at the top implies Dirichlet boundary condition for
	1275	!-- temperature. In this case specification of a constant heat flux is
	1276	!-- forbidden.
	1277	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1278	top_heatflux /= 0.0 ) THEN
[215]	1279	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1280	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1281	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1282	ENDIF
	1283
	1284	!
[95]	1285	!-- Boundary conditions for salinity
	1286	IF ( ocean ) THEN
	1287	IF ( bc_sa_t == 'dirichlet' ) THEN
	1288	ibc_sa_t = 0
	1289	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1290	ibc_sa_t = 1
	1291	ELSE
[215]	1292	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1293	TRIM( bc_sa_t ) // '"'
[226]	1294	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1295	ENDIF
	1296
	1297	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1298	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1299	message_string = 'boundary condition: bc_sa_t = "' // &
	1300	TRIM( bc_sa_t ) // '" requires to set ' // &
	1301	'top_salinityflux'
[226]	1302	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1303	ENDIF
[95]	1304
	1305	!
	1306	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1307	!-- salinity. In this case specification of a constant salinity flux is
	1308	!-- forbidden.
	1309	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1310	top_salinityflux /= 0.0 ) THEN
[215]	1311	message_string = 'boundary condition: bc_sa_t = "' // &
	1312	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1313	'constant_top_salinityflux = .TRUE.'
[226]	1314	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1315	ENDIF
	1316
	1317	ENDIF
	1318
	1319	!
[75]	1320	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1321	!-- water content / scalar
[75]	1322	IF ( humidity .OR. passive_scalar ) THEN
	1323	IF ( humidity ) THEN
[1]	1324	sq = 'q'
	1325	ELSE
	1326	sq = 's'
	1327	ENDIF
	1328	IF ( bc_q_b == 'dirichlet' ) THEN
	1329	ibc_q_b = 0
	1330	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1331	ibc_q_b = 1
	1332	ELSE
[215]	1333	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1334	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1335	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1336	ENDIF
	1337	IF ( bc_q_t == 'dirichlet' ) THEN
	1338	ibc_q_t = 0
	1339	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1340	ibc_q_t = 1
	1341	ELSE
[215]	1342	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1343	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1344	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1345	ENDIF
	1346
	1347	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1348
	1349	!
	1350	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1351	!-- humidity. In this case specification of a constant water flux is
[1]	1352	!-- forbidden.
	1353	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1354	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1355	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1356	'th prescribed surface flux'
[226]	1357	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1358	ENDIF
	1359	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1360	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1361	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1362	q_surface_initial_change
[226]	1363	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1364	ENDIF
	1365
	1366	ENDIF
	1367
	1368	!
	1369	!-- Boundary conditions for horizontal components of wind speed
	1370	IF ( bc_uv_b == 'dirichlet' ) THEN
	1371	ibc_uv_b = 0
	1372	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1373	ibc_uv_b = 1
	1374	IF ( prandtl_layer ) THEN
[215]	1375	message_string = 'boundary condition: bc_uv_b = "' // &
	1376	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1377	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1378	ENDIF
	1379	ELSE
[215]	1380	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1381	TRIM( bc_uv_b ) // '"'
[226]	1382	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1383	ENDIF
[215]	1384
[108]	1385	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1386	bc_uv_t = 'neumann'
[1]	1387	ibc_uv_t = 1
	1388	ELSE
[132]	1389	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1390	ibc_uv_t = 0
	1391	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1392	ibc_uv_t = 1
	1393	ELSE
[215]	1394	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1395	TRIM( bc_uv_t ) // '"'
[226]	1396	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1397	ENDIF
	1398	ENDIF
	1399
	1400	!
	1401	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1402	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1403	IF ( momentum_advec == 'ups-scheme' ) THEN
	1404	rayleigh_damping_factor = 0.01
	1405	ELSE
	1406	rayleigh_damping_factor = 0.0
	1407	ENDIF
	1408	ELSE
	1409	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1410	THEN
[215]	1411	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1412	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1413	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1414	ENDIF
	1415	ENDIF
	1416
	1417	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1418	IF ( .NOT. ocean ) THEN
	1419	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1420	ELSE
	1421	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1422	ENDIF
[1]	1423	ELSE
[108]	1424	IF ( .NOT. ocean ) THEN
	1425	IF ( rayleigh_damping_height < 0.0 .OR. &
	1426	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1427	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1428	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1429	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1430	ENDIF
[108]	1431	ELSE
	1432	IF ( rayleigh_damping_height > 0.0 .OR. &
	1433	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1434	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1435	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1436	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1437	ENDIF
[1]	1438	ENDIF
	1439	ENDIF
	1440
	1441	!
	1442	!-- Check limiters for Upstream-Spline scheme
	1443	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1444	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1445	overshoot_limit_e < 0.0 ) THEN
[215]	1446	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1447	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1448	ENDIF
	1449	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1450	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1451	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1452	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1453	ENDIF
	1454
	1455	!
	1456	!-- Check number of chosen statistic regions. More than 10 regions are not
	1457	!-- allowed, because so far no more than 10 corresponding output files can
	1458	!-- be opened (cf. check_open)
	1459	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1460	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1461	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1462	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1463	ENDIF
	1464	IF ( normalizing_region > statistic_regions .OR. &
	1465	normalizing_region < 0) THEN
[215]	1466	WRITE ( message_string, * ) 'normalizing_region = ', &
	1467	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1468	' (value of statistic_regions)'
[226]	1469	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1470	ENDIF
	1471
	1472	!
[116]	1473	!-- Check the interval for sorting particles.
	1474	!-- Using particles as cloud droplets requires sorting after each timestep.
	1475	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1476	dt_sort_particles = 0.0
[215]	1477	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1478	'_droplets = .TRUE.'
[226]	1479	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1480	ENDIF
	1481
	1482	!
[1]	1483	!-- Set the default intervals for data output, if necessary
	1484	!-- NOTE: dt_dosp has already been set in package_parin
	1485	IF ( dt_data_output /= 9999999.9 ) THEN
	1486	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1487	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1488	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1489	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1490	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1491	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1492	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[410]	1493	DO mid = 1, 20
	1494	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1495	ENDDO
[1]	1496	ENDIF
	1497
	1498	!
	1499	!-- Set the default skip time intervals for data output, if necessary
	1500	IF ( skip_time_dopr == 9999999.9 ) &
	1501	skip_time_dopr = skip_time_data_output
	1502	IF ( skip_time_dosp == 9999999.9 ) &
	1503	skip_time_dosp = skip_time_data_output
	1504	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1505	skip_time_do2d_xy = skip_time_data_output
	1506	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1507	skip_time_do2d_xz = skip_time_data_output
	1508	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1509	skip_time_do2d_yz = skip_time_data_output
	1510	IF ( skip_time_do3d == 9999999.9 ) &
	1511	skip_time_do3d = skip_time_data_output
	1512	IF ( skip_time_data_output_av == 9999999.9 ) &
	1513	skip_time_data_output_av = skip_time_data_output
[410]	1514	DO mid = 1, 20
	1515	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1516	skip_time_domask(mid) = skip_time_data_output
	1517	ENDDO
[1]	1518
	1519	!
	1520	!-- Check the average intervals (first for 3d-data, then for profiles and
	1521	!-- spectra)
	1522	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1523	WRITE( message_string, * ) 'averaging_interval = ', &
	1524	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1525	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1526	ENDIF
	1527
	1528	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1529	averaging_interval_pr = averaging_interval
	1530	ENDIF
	1531
	1532	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1533	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1534	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1535	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1536	ENDIF
	1537
	1538	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1539	averaging_interval_sp = averaging_interval
	1540	ENDIF
	1541
	1542	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1543	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1544	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1545	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1546	ENDIF
	1547
	1548	!
	1549	!-- Set the default interval for profiles entering the temporal average
	1550	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1551	dt_averaging_input_pr = dt_averaging_input
	1552	ENDIF
	1553
	1554	!
	1555	!-- Set the default interval for the output of timeseries to a reasonable
	1556	!-- value (tries to minimize the number of calls of flow_statistics)
	1557	IF ( dt_dots == 9999999.9 ) THEN
	1558	IF ( averaging_interval_pr == 0.0 ) THEN
	1559	dt_dots = MIN( dt_run_control, dt_dopr )
	1560	ELSE
	1561	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1562	ENDIF
	1563	ENDIF
	1564
	1565	!
	1566	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1567	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1568	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1569	dt_averaging_input, ' must be <= averaging_interval = ', &
	1570	averaging_interval
[226]	1571	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1572	ENDIF
	1573
	1574	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1575	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1576	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1577	averaging_interval_pr
[226]	1578	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1579	ENDIF
	1580
	1581	!
[72]	1582	!-- Set the default value for the integration interval of precipitation amount
	1583	IF ( precipitation ) THEN
	1584	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1585	precipitation_amount_interval = dt_do2d_xy
	1586	ELSE
	1587	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1588	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1589	precipitation_amount_interval, ' must not be larger than ', &
	1590	'dt_do2d_xy = ', dt_do2d_xy
[226]	1591	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1592	ENDIF
	1593	ENDIF
	1594	ENDIF
	1595
	1596	!
[1]	1597	!-- Determine the number of output profiles and check whether they are
	1598	!-- permissible
	1599	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1600
	1601	dopr_n = dopr_n + 1
	1602	i = dopr_n
	1603
	1604	!
	1605	!-- Determine internal profile number (for hom, homs)
	1606	!-- and store height levels
	1607	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1608
	1609	CASE ( 'u', '#u' )
	1610	dopr_index(i) = 1
[87]	1611	dopr_unit(i) = 'm/s'
[1]	1612	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1613	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1614	dopr_initial_index(i) = 5
	1615	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1616	data_output_pr(i) = data_output_pr(i)(2:)
	1617	ENDIF
	1618
	1619	CASE ( 'v', '#v' )
	1620	dopr_index(i) = 2
[87]	1621	dopr_unit(i) = 'm/s'
	1622	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1623	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1624	dopr_initial_index(i) = 6
	1625	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1626	data_output_pr(i) = data_output_pr(i)(2:)
	1627	ENDIF
	1628
	1629	CASE ( 'w' )
	1630	dopr_index(i) = 3
[87]	1631	dopr_unit(i) = 'm/s'
	1632	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1633
	1634	CASE ( 'pt', '#pt' )
	1635	IF ( .NOT. cloud_physics ) THEN
	1636	dopr_index(i) = 4
[87]	1637	dopr_unit(i) = 'K'
[1]	1638	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1639	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1640	dopr_initial_index(i) = 7
	1641	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1642	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1643	data_output_pr(i) = data_output_pr(i)(2:)
	1644	ENDIF
	1645	ELSE
	1646	dopr_index(i) = 43
[87]	1647	dopr_unit(i) = 'K'
[1]	1648	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1649	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1650	dopr_initial_index(i) = 28
	1651	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1652	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1653	data_output_pr(i) = data_output_pr(i)(2:)
	1654	ENDIF
	1655	ENDIF
	1656
	1657	CASE ( 'e' )
	1658	dopr_index(i) = 8
[87]	1659	dopr_unit(i) = 'm2/s2'
[1]	1660	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1661	hom(nzb,2,8,:) = 0.0
	1662
	1663	CASE ( 'km', '#km' )
	1664	dopr_index(i) = 9
[87]	1665	dopr_unit(i) = 'm2/s'
[1]	1666	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1667	hom(nzb,2,9,:) = 0.0
	1668	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1669	dopr_initial_index(i) = 23
	1670	hom(:,2,23,:) = hom(:,2,9,:)
	1671	data_output_pr(i) = data_output_pr(i)(2:)
	1672	ENDIF
	1673
	1674	CASE ( 'kh', '#kh' )
	1675	dopr_index(i) = 10
[87]	1676	dopr_unit(i) = 'm2/s'
[1]	1677	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1678	hom(nzb,2,10,:) = 0.0
	1679	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1680	dopr_initial_index(i) = 24
	1681	hom(:,2,24,:) = hom(:,2,10,:)
	1682	data_output_pr(i) = data_output_pr(i)(2:)
	1683	ENDIF
	1684
	1685	CASE ( 'l', '#l' )
	1686	dopr_index(i) = 11
[87]	1687	dopr_unit(i) = 'm'
[1]	1688	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1689	hom(nzb,2,11,:) = 0.0
	1690	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1691	dopr_initial_index(i) = 25
	1692	hom(:,2,25,:) = hom(:,2,11,:)
	1693	data_output_pr(i) = data_output_pr(i)(2:)
	1694	ENDIF
	1695
	1696	CASE ( 'w"u"' )
	1697	dopr_index(i) = 12
[87]	1698	dopr_unit(i) = 'm2/s2'
[1]	1699	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1700	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1701
	1702	CASE ( 'wu' )
	1703	dopr_index(i) = 13
[87]	1704	dopr_unit(i) = 'm2/s2'
[1]	1705	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1706
	1707	CASE ( 'w"v"' )
	1708	dopr_index(i) = 14
[87]	1709	dopr_unit(i) = 'm2/s2'
[1]	1710	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1711	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1712
	1713	CASE ( 'wv' )
	1714	dopr_index(i) = 15
[87]	1715	dopr_unit(i) = 'm2/s2'
[1]	1716	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1717
	1718	CASE ( 'w"pt"' )
	1719	dopr_index(i) = 16
[87]	1720	dopr_unit(i) = 'K m/s'
[1]	1721	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1722
	1723	CASE ( 'wpt' )
	1724	dopr_index(i) = 17
[87]	1725	dopr_unit(i) = 'K m/s'
[1]	1726	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1727
	1728	CASE ( 'wpt' )
	1729	dopr_index(i) = 18
[87]	1730	dopr_unit(i) = 'K m/s'
[1]	1731	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1732
	1733	CASE ( 'wu' )
	1734	dopr_index(i) = 19
[87]	1735	dopr_unit(i) = 'm2/s2'
[1]	1736	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1737	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1738
	1739	CASE ( 'wv' )
	1740	dopr_index(i) = 20
[87]	1741	dopr_unit(i) = 'm2/s2'
[1]	1742	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1743	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1744
	1745	CASE ( 'wptBC' )
	1746	dopr_index(i) = 21
[87]	1747	dopr_unit(i) = 'K m/s'
[1]	1748	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1749
	1750	CASE ( 'wptBC' )
	1751	dopr_index(i) = 22
[87]	1752	dopr_unit(i) = 'K m/s'
[1]	1753	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1754
[96]	1755	CASE ( 'sa', '#sa' )
	1756	IF ( .NOT. ocean ) THEN
[215]	1757	message_string = 'data_output_pr = ' // &
	1758	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1759	'lemented for ocean = .FALSE.'
[226]	1760	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1761	ELSE
	1762	dopr_index(i) = 23
	1763	dopr_unit(i) = 'psu'
	1764	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1765	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1766	dopr_initial_index(i) = 26
	1767	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1768	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1769	data_output_pr(i) = data_output_pr(i)(2:)
	1770	ENDIF
	1771	ENDIF
	1772
[1]	1773	CASE ( 'u*2' )
	1774	dopr_index(i) = 30
[87]	1775	dopr_unit(i) = 'm2/s2'
[1]	1776	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1777
	1778	CASE ( 'v*2' )
	1779	dopr_index(i) = 31
[87]	1780	dopr_unit(i) = 'm2/s2'
[1]	1781	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1782
	1783	CASE ( 'w*2' )
	1784	dopr_index(i) = 32
[87]	1785	dopr_unit(i) = 'm2/s2'
[1]	1786	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1787
	1788	CASE ( 'pt*2' )
	1789	dopr_index(i) = 33
[87]	1790	dopr_unit(i) = 'K2'
[1]	1791	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1792
	1793	CASE ( 'e*' )
	1794	dopr_index(i) = 34
[87]	1795	dopr_unit(i) = 'm2/s2'
[1]	1796	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1797
	1798	CASE ( 'w2pt' )
	1799	dopr_index(i) = 35
[87]	1800	dopr_unit(i) = 'K m2/s2'
[1]	1801	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1802
	1803	CASE ( 'wpt2' )
	1804	dopr_index(i) = 36
[87]	1805	dopr_unit(i) = 'K2 m/s'
[1]	1806	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1807
	1808	CASE ( 'we' )
	1809	dopr_index(i) = 37
[87]	1810	dopr_unit(i) = 'm3/s3'
[1]	1811	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1812
	1813	CASE ( 'w*3' )
	1814	dopr_index(i) = 38
[87]	1815	dopr_unit(i) = 'm3/s3'
[1]	1816	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1817
	1818	CASE ( 'Sw' )
	1819	dopr_index(i) = 39
[89]	1820	dopr_unit(i) = 'none'
[1]	1821	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1822
[232]	1823	CASE ( 'p' )
	1824	dopr_index(i) = 40
	1825	dopr_unit(i) = 'Pa'
	1826	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1827
[1]	1828	CASE ( 'q', '#q' )
[108]	1829	IF ( .NOT. humidity ) THEN
[215]	1830	message_string = 'data_output_pr = ' // &
	1831	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1832	'lemented for humidity = .FALSE.'
[226]	1833	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1834	ELSE
	1835	dopr_index(i) = 41
[87]	1836	dopr_unit(i) = 'kg/kg'
	1837	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1838	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1839	dopr_initial_index(i) = 26
	1840	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1841	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1842	data_output_pr(i) = data_output_pr(i)(2:)
	1843	ENDIF
	1844	ENDIF
	1845
	1846	CASE ( 's', '#s' )
	1847	IF ( .NOT. passive_scalar ) THEN
[215]	1848	message_string = 'data_output_pr = ' // &
	1849	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1850	'lemented for passive_scalar = .FALSE.'
[226]	1851	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1852	ELSE
	1853	dopr_index(i) = 41
[87]	1854	dopr_unit(i) = 'kg/m3'
	1855	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1856	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1857	dopr_initial_index(i) = 26
	1858	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1859	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1860	data_output_pr(i) = data_output_pr(i)(2:)
	1861	ENDIF
	1862	ENDIF
	1863
	1864	CASE ( 'qv', '#qv' )
	1865	IF ( .NOT. cloud_physics ) THEN
	1866	dopr_index(i) = 41
[87]	1867	dopr_unit(i) = 'kg/kg'
	1868	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1869	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1870	dopr_initial_index(i) = 26
	1871	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1872	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1873	data_output_pr(i) = data_output_pr(i)(2:)
	1874	ENDIF
	1875	ELSE
	1876	dopr_index(i) = 42
[87]	1877	dopr_unit(i) = 'kg/kg'
	1878	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1879	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1880	dopr_initial_index(i) = 27
	1881	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1882	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1883	data_output_pr(i) = data_output_pr(i)(2:)
	1884	ENDIF
	1885	ENDIF
	1886
	1887	CASE ( 'lpt', '#lpt' )
	1888	IF ( .NOT. cloud_physics ) THEN
[215]	1889	message_string = 'data_output_pr = ' // &
	1890	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1891	'lemented for cloud_physics = .FALSE.'
[226]	1892	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	1893	ELSE
	1894	dopr_index(i) = 4
[87]	1895	dopr_unit(i) = 'K'
[1]	1896	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1897	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1898	dopr_initial_index(i) = 7
	1899	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1900	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1901	data_output_pr(i) = data_output_pr(i)(2:)
	1902	ENDIF
	1903	ENDIF
	1904
	1905	CASE ( 'vpt', '#vpt' )
	1906	dopr_index(i) = 44
[87]	1907	dopr_unit(i) = 'K'
	1908	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1909	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1910	dopr_initial_index(i) = 29
	1911	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1912	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1913	data_output_pr(i) = data_output_pr(i)(2:)
	1914	ENDIF
	1915
	1916	CASE ( 'w"vpt"' )
	1917	dopr_index(i) = 45
[87]	1918	dopr_unit(i) = 'K m/s'
[1]	1919	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1920
	1921	CASE ( 'wvpt' )
	1922	dopr_index(i) = 46
[87]	1923	dopr_unit(i) = 'K m/s'
[1]	1924	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1925
	1926	CASE ( 'wvpt' )
	1927	dopr_index(i) = 47
[87]	1928	dopr_unit(i) = 'K m/s'
[1]	1929	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1930
	1931	CASE ( 'w"q"' )
[108]	1932	IF ( .NOT. humidity ) THEN
[215]	1933	message_string = 'data_output_pr = ' // &
	1934	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1935	'lemented for humidity = .FALSE.'
[226]	1936	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1937	ELSE
	1938	dopr_index(i) = 48
[87]	1939	dopr_unit(i) = 'kg/kg m/s'
[1]	1940	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1941	ENDIF
	1942
	1943	CASE ( 'wq' )
[108]	1944	IF ( .NOT. humidity ) THEN
[215]	1945	message_string = 'data_output_pr = ' // &
	1946	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1947	'lemented for humidity = .FALSE.'
[226]	1948	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1949	ELSE
	1950	dopr_index(i) = 49
[87]	1951	dopr_unit(i) = 'kg/kg m/s'
[1]	1952	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1953	ENDIF
	1954
	1955	CASE ( 'wq' )
[108]	1956	IF ( .NOT. humidity ) THEN
[215]	1957	message_string = 'data_output_pr = ' // &
	1958	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1959	'lemented for humidity = .FALSE.'
[226]	1960	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1961	ELSE
	1962	dopr_index(i) = 50
[87]	1963	dopr_unit(i) = 'kg/kg m/s'
[1]	1964	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1965	ENDIF
	1966
	1967	CASE ( 'w"s"' )
	1968	IF ( .NOT. passive_scalar ) THEN
[215]	1969	message_string = 'data_output_pr = ' // &
	1970	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1971	'lemented for passive_scalar = .FALSE.'
[226]	1972	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1973	ELSE
	1974	dopr_index(i) = 48
[87]	1975	dopr_unit(i) = 'kg/m3 m/s'
[1]	1976	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1977	ENDIF
	1978
	1979	CASE ( 'ws' )
	1980	IF ( .NOT. passive_scalar ) THEN
[215]	1981	message_string = 'data_output_pr = ' // &
	1982	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1983	'lemented for passive_scalar = .FALSE.'
[226]	1984	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1985	ELSE
	1986	dopr_index(i) = 49
[87]	1987	dopr_unit(i) = 'kg/m3 m/s'
[1]	1988	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1989	ENDIF
	1990
	1991	CASE ( 'ws' )
	1992	IF ( .NOT. passive_scalar ) THEN
[215]	1993	message_string = 'data_output_pr = ' // &
	1994	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1995	'lemented for passive_scalar = .FALSE.'
[226]	1996	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1997	ELSE
	1998	dopr_index(i) = 50
[87]	1999	dopr_unit(i) = 'kg/m3 m/s'
[1]	2000	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2001	ENDIF
	2002
	2003	CASE ( 'w"qv"' )
[75]	2004	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2005	THEN
	2006	dopr_index(i) = 48
[87]	2007	dopr_unit(i) = 'kg/kg m/s'
[1]	2008	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2009	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2010	dopr_index(i) = 51
[87]	2011	dopr_unit(i) = 'kg/kg m/s'
[1]	2012	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2013	ELSE
[215]	2014	message_string = 'data_output_pr = ' // &
	2015	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2016	'lemented for cloud_physics = .FALSE. an&' // &
	2017	'd humidity = .FALSE.'
[226]	2018	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2019	ENDIF
	2020
	2021	CASE ( 'wqv' )
[75]	2022	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2023	THEN
	2024	dopr_index(i) = 49
[87]	2025	dopr_unit(i) = 'kg/kg m/s'
[1]	2026	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2027	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2028	dopr_index(i) = 52
[87]	2029	dopr_unit(i) = 'kg/kg m/s'
[1]	2030	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2031	ELSE
[215]	2032	message_string = 'data_output_pr = ' // &
	2033	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2034	'lemented for cloud_physics = .FALSE. an&' // &
	2035	'd humidity = .FALSE.'
[226]	2036	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2037	ENDIF
	2038
	2039	CASE ( 'wqv' )
[75]	2040	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2041	THEN
	2042	dopr_index(i) = 50
[87]	2043	dopr_unit(i) = 'kg/kg m/s'
[1]	2044	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2045	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2046	dopr_index(i) = 53
[87]	2047	dopr_unit(i) = 'kg/kg m/s'
[1]	2048	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2049	ELSE
[215]	2050	message_string = 'data_output_pr = ' // &
	2051	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2052	'lemented for cloud_physics = .FALSE. an&' // &
	2053	'd humidity = .FALSE.'
[226]	2054	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2055	ENDIF
	2056
	2057	CASE ( 'ql' )
	2058	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2059	message_string = 'data_output_pr = ' // &
	2060	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2061	'lemented for cloud_physics = .FALSE. or' // &
	2062	'&cloud_droplets = .FALSE.'
[226]	2063	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2064	ELSE
	2065	dopr_index(i) = 54
[87]	2066	dopr_unit(i) = 'kg/kg'
[1]	2067	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2068	ENDIF
	2069
	2070	CASE ( 'wuu*/dz' )
	2071	dopr_index(i) = 55
[87]	2072	dopr_unit(i) = 'm2/s3'
[1]	2073	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2074
	2075	CASE ( 'wp/dz' )
	2076	dopr_index(i) = 56
[87]	2077	dopr_unit(i) = 'm2/s3'
[106]	2078	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2079
	2080	CASE ( 'w"e/dz' )
	2081	dopr_index(i) = 57
[87]	2082	dopr_unit(i) = 'm2/s3'
[1]	2083	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2084
	2085	CASE ( 'u"pt"' )
	2086	dopr_index(i) = 58
[87]	2087	dopr_unit(i) = 'K m/s'
[1]	2088	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2089
	2090	CASE ( 'upt' )
	2091	dopr_index(i) = 59
[87]	2092	dopr_unit(i) = 'K m/s'
[1]	2093	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2094
	2095	CASE ( 'upt_t' )
	2096	dopr_index(i) = 60
[87]	2097	dopr_unit(i) = 'K m/s'
[1]	2098	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2099
	2100	CASE ( 'v"pt"' )
	2101	dopr_index(i) = 61
[87]	2102	dopr_unit(i) = 'K m/s'
[1]	2103	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2104
	2105	CASE ( 'vpt' )
	2106	dopr_index(i) = 62
[87]	2107	dopr_unit(i) = 'K m/s'
[1]	2108	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2109
	2110	CASE ( 'vpt_t' )
	2111	dopr_index(i) = 63
[87]	2112	dopr_unit(i) = 'K m/s'
[1]	2113	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2114
[96]	2115	CASE ( 'rho' )
[388]	2116	IF ( .NOT. ocean ) THEN
	2117	message_string = 'data_output_pr = ' // &
	2118	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2119	'lemented for ocean = .FALSE.'
	2120	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2121	ELSE
	2122	dopr_index(i) = 64
	2123	dopr_unit(i) = 'kg/m3'
	2124	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2125	ENDIF
[1]	2126
[96]	2127	CASE ( 'w"sa"' )
	2128	IF ( .NOT. ocean ) THEN
[215]	2129	message_string = 'data_output_pr = ' // &
	2130	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2131	'lemented for ocean = .FALSE.'
[226]	2132	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2133	ELSE
	2134	dopr_index(i) = 65
	2135	dopr_unit(i) = 'psu m/s'
	2136	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2137	ENDIF
	2138
	2139	CASE ( 'wsa' )
	2140	IF ( .NOT. ocean ) THEN
[215]	2141	message_string = 'data_output_pr = ' // &
	2142	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2143	'lemented for ocean = .FALSE.'
[226]	2144	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2145	ELSE
	2146	dopr_index(i) = 66
	2147	dopr_unit(i) = 'psu m/s'
	2148	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2149	ENDIF
	2150
	2151	CASE ( 'wsa' )
	2152	IF ( .NOT. ocean ) THEN
[215]	2153	message_string = 'data_output_pr = ' // &
	2154	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2155	'lemented for ocean = .FALSE.'
[226]	2156	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2157	ELSE
	2158	dopr_index(i) = 67
	2159	dopr_unit(i) = 'psu m/s'
	2160	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2161	ENDIF
	2162
[106]	2163	CASE ( 'wp' )
	2164	dopr_index(i) = 68
	2165	dopr_unit(i) = 'm3/s3'
	2166	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2167
[106]	2168	CASE ( 'w"e' )
	2169	dopr_index(i) = 69
	2170	dopr_unit(i) = 'm3/s3'
	2171	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2172
[197]	2173	CASE ( 'q*2' )
	2174	IF ( .NOT. humidity ) THEN
[215]	2175	message_string = 'data_output_pr = ' // &
	2176	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2177	'lemented for humidity = .FALSE.'
[226]	2178	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2179	ELSE
	2180	dopr_index(i) = 70
	2181	dopr_unit(i) = 'kg2/kg2'
	2182	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2183	ENDIF
[106]	2184
[388]	2185	CASE ( 'prho' )
	2186	IF ( .NOT. ocean ) THEN
	2187	message_string = 'data_output_pr = ' // &
	2188	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2189	'lemented for ocean = .FALSE.'
	2190	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2191	ELSE
	2192	dopr_index(i) = 71
	2193	dopr_unit(i) = 'kg/m3'
	2194	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2195	ENDIF
	2196
	2197	CASE ( 'hyp' )
	2198	dopr_index(i) = 72
	2199	dopr_unit(i) = 'kPa'
	2200	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2201
[1]	2202	CASE DEFAULT
[87]	2203
	2204	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2205
	2206	IF ( unit == 'illegal' ) THEN
[215]	2207	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2208	message_string = 'illegal value for data_output_pr or ' // &
	2209	'data_output_pr_user = "' // &
	2210	TRIM( data_output_pr(i) ) // '"'
[226]	2211	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2212	ELSE
	2213	message_string = 'illegal value for data_output_pr = "' // &
	2214	TRIM( data_output_pr(i) ) // '"'
[226]	2215	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2216	ENDIF
[1]	2217	ENDIF
	2218
	2219	END SELECT
	2220	!
	2221	!-- Check to which of the predefined coordinate systems the profile belongs
	2222	DO k = 1, crmax
	2223	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2224	/=0 ) &
	2225	THEN
	2226	dopr_crossindex(i) = k
	2227	EXIT
	2228	ENDIF
	2229	ENDDO
	2230	!
	2231	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2232	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2233	!-- control characters
	2234	dopr_label(i) = data_output_pr(i)
	2235	position = INDEX( dopr_label(i) , '"' )
	2236	DO WHILE ( position /= 0 )
	2237	dopr_label(i)(position:position) = ''''
	2238	position = INDEX( dopr_label(i) , '"' )
	2239	ENDDO
	2240
	2241	ENDDO
	2242
	2243	!
	2244	!-- y-value range of the coordinate system (PROFIL).
	2245	!-- x-value range determined in plot_1d.
[94]	2246	IF ( .NOT. ocean ) THEN
	2247	cross_uymin = 0.0
	2248	IF ( z_max_do1d == -1.0 ) THEN
	2249	cross_uymax = zu(nzt+1)
	2250	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2251	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2252	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2253	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2254	ELSE
	2255	cross_uymax = z_max_do1d
	2256	ENDIF
[1]	2257	ENDIF
	2258
	2259	!
	2260	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2261	!-- permissible
	2262	DO i = 1, crmax
	2263	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2264
	2265	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2266	j = 0
	2267
	2268	CASE DEFAULT
[215]	2269	message_string = 'unknown normalization method cross_normali' // &
	2270	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2271	'"'
[226]	2272	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2273
	2274	END SELECT
	2275	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2276
	2277	CASE ( '', 'z_i' )
	2278	j = 0
	2279
	2280	CASE DEFAULT
[215]	2281	message_string = 'unknown normalization method cross_normali' // &
	2282	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2283	'"'
[226]	2284	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2285
	2286	END SELECT
	2287	ENDDO
	2288	!
	2289	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2290	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2291	THEN
[215]	2292	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2293	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2294	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2295	ENDIF
	2296
	2297
	2298	!
	2299	!-- Append user-defined data output variables to the standard data output
	2300	IF ( data_output_user(1) /= ' ' ) THEN
	2301	i = 1
	2302	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2303	i = i + 1
	2304	ENDDO
	2305	j = 1
	2306	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2307	IF ( i > 100 ) THEN
[215]	2308	message_string = 'number of output quantitities given by data' // &
	2309	'_output and data_output_user exceeds the limit of 100'
[226]	2310	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2311	ENDIF
	2312	data_output(i) = data_output_user(j)
	2313	i = i + 1
	2314	j = j + 1
	2315	ENDDO
	2316	ENDIF
	2317
	2318	!
	2319	!-- Check and set steering parameters for 2d/3d data output and averaging
	2320	i = 1
	2321	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2322	!
	2323	!-- Check for data averaging
	2324	ilen = LEN_TRIM( data_output(i) )
	2325	j = 0 ! no data averaging
	2326	IF ( ilen > 3 ) THEN
	2327	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2328	j = 1 ! data averaging
	2329	data_output(i) = data_output(i)(1:ilen-3)
	2330	ENDIF
	2331	ENDIF
	2332	!
	2333	!-- Check for cross section or volume data
	2334	ilen = LEN_TRIM( data_output(i) )
	2335	k = 0 ! 3d data
	2336	var = data_output(i)(1:ilen)
	2337	IF ( ilen > 3 ) THEN
	2338	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2339	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2340	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2341	k = 1 ! 2d data
	2342	var = data_output(i)(1:ilen-3)
	2343	ENDIF
	2344	ENDIF
	2345	!
	2346	!-- Check for allowed value and set units
	2347	SELECT CASE ( TRIM( var ) )
	2348
	2349	CASE ( 'e' )
	2350	IF ( constant_diffusion ) THEN
[215]	2351	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2352	'res constant_diffusion = .FALSE.'
[226]	2353	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2354	ENDIF
	2355	unit = 'm2/s2'
	2356
	2357	CASE ( 'pc', 'pr' )
	2358	IF ( .NOT. particle_advection ) THEN
[215]	2359	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2360	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2361	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2362	ENDIF
	2363	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2364	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2365
	2366	CASE ( 'q', 'vpt' )
[75]	2367	IF ( .NOT. humidity ) THEN
[215]	2368	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2369	'res humidity = .TRUE.'
[226]	2370	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2371	ENDIF
	2372	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2373	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2374
	2375	CASE ( 'ql' )
	2376	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2377	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2378	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2379	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2380	ENDIF
	2381	unit = 'kg/kg'
	2382
	2383	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2384	IF ( .NOT. cloud_droplets ) THEN
[215]	2385	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2386	'res cloud_droplets = .TRUE.'
[226]	2387	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2388	ENDIF
	2389	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2390	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2391	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2392
	2393	CASE ( 'qv' )
	2394	IF ( .NOT. cloud_physics ) THEN
[215]	2395	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2396	'res cloud_physics = .TRUE.'
[226]	2397	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2398	ENDIF
	2399	unit = 'kg/kg'
	2400
[96]	2401	CASE ( 'rho' )
	2402	IF ( .NOT. ocean ) THEN
[215]	2403	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2404	'res ocean = .TRUE.'
[226]	2405	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2406	ENDIF
	2407	unit = 'kg/m3'
	2408
[1]	2409	CASE ( 's' )
	2410	IF ( .NOT. passive_scalar ) THEN
[215]	2411	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2412	'res passive_scalar = .TRUE.'
[226]	2413	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2414	ENDIF
	2415	unit = 'conc'
	2416
[96]	2417	CASE ( 'sa' )
	2418	IF ( .NOT. ocean ) THEN
[215]	2419	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2420	'res ocean = .TRUE.'
[226]	2421	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2422	ENDIF
	2423	unit = 'psu'
	2424
[354]	2425	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2426	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2427	message_string = 'illegal value for data_output: "' // &
	2428	TRIM( var ) // '" & only 2d-horizontal ' // &
	2429	'cross sections are allowed for this value'
[226]	2430	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2431	ENDIF
	2432	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2433	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2434	'res cloud_physics = .TRUE.'
[226]	2435	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2436	ENDIF
[72]	2437	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2438	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2439	'res precipitation = .TRUE.'
[226]	2440	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2441	ENDIF
	2442	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2443	message_string = 'temporal averaging of precipitation ' // &
	2444	'amount "' // TRIM( var ) // '" is not possible'
[226]	2445	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2446	ENDIF
	2447	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2448	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2449	'res precipitation = .TRUE.'
[226]	2450	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2451	ENDIF
[354]	2452	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2453	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2454	'res humidity = .TRUE.'
	2455	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2456	ENDIF
[72]	2457
[354]	2458	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2459	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2460	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2461	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2462	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2463	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2464	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2465	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2466
[1]	2467
	2468	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2469	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2470	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2471	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2472	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2473	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2474	CONTINUE
	2475
	2476	CASE DEFAULT
	2477	CALL user_check_data_output( var, unit )
	2478
	2479	IF ( unit == 'illegal' ) THEN
[215]	2480	IF ( data_output_user(1) /= ' ' ) THEN
	2481	message_string = 'illegal value for data_output or ' // &
	2482	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2483	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2484	ELSE
	2485	message_string = 'illegal value for data_output =' // &
	2486	TRIM( data_output(i) ) // '"'
[226]	2487	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2488	ENDIF
	2489	ENDIF
	2490
	2491	END SELECT
	2492	!
	2493	!-- Set the internal steering parameters appropriately
	2494	IF ( k == 0 ) THEN
	2495	do3d_no(j) = do3d_no(j) + 1
	2496	do3d(j,do3d_no(j)) = data_output(i)
	2497	do3d_unit(j,do3d_no(j)) = unit
	2498	ELSE
	2499	do2d_no(j) = do2d_no(j) + 1
	2500	do2d(j,do2d_no(j)) = data_output(i)
	2501	do2d_unit(j,do2d_no(j)) = unit
	2502	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2503	data_output_xy(j) = .TRUE.
	2504	ENDIF
	2505	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2506	data_output_xz(j) = .TRUE.
	2507	ENDIF
	2508	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2509	data_output_yz(j) = .TRUE.
	2510	ENDIF
	2511	ENDIF
	2512
	2513	IF ( j == 1 ) THEN
	2514	!
	2515	!-- Check, if variable is already subject to averaging
	2516	found = .FALSE.
	2517	DO k = 1, doav_n
	2518	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2519	ENDDO
	2520
	2521	IF ( .NOT. found ) THEN
	2522	doav_n = doav_n + 1
	2523	doav(doav_n) = var
	2524	ENDIF
	2525	ENDIF
	2526
	2527	i = i + 1
	2528	ENDDO
	2529
	2530	!
[376]	2531	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2532	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2533	WRITE( message_string, * ) 'output of averaged quantity "', &
	2534	TRIM( doav(1) ), '_av" requires to set a ', &
	2535	'non-zero & averaging interval'
	2536	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2537	ENDIF
	2538
	2539	!
[308]	2540	!-- Check sectional planes and store them in one shared array
	2541	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2542	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2543	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2544	ENDIF
	2545	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2546	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2547	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2548	ENDIF
	2549	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2550	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2551	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2552	ENDIF
[1]	2553	section(:,1) = section_xy
	2554	section(:,2) = section_xz
	2555	section(:,3) = section_yz
	2556
	2557	!
	2558	!-- Upper plot limit (grid point value) for 1D profiles
	2559	IF ( z_max_do1d == -1.0 ) THEN
	2560	nz_do1d = nzt+1
	2561	ELSE
	2562	DO k = nzb+1, nzt+1
	2563	nz_do1d = k
	2564	IF ( zw(k) > z_max_do1d ) EXIT
	2565	ENDDO
	2566	ENDIF
	2567
	2568	!
	2569	!-- Upper plot limit for 2D vertical sections
	2570	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2571	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2572	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2573	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2574	' (zu(nzt))'
[226]	2575	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2576	ENDIF
	2577
	2578	!
	2579	!-- Upper plot limit for 3D arrays
	2580	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2581
	2582	!
	2583	!-- Determine and check accuracy for compressed 3D plot output
	2584	IF ( do3d_compress ) THEN
	2585	!
	2586	!-- Compression only permissible on T3E machines
	2587	IF ( host(1:3) /= 't3e' ) THEN
[215]	2588	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2589	TRIM( host ) // '"'
[226]	2590	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2591	ENDIF
	2592
	2593	i = 1
	2594	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2595
	2596	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2597	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2598	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2599	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2600	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2601	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2602	ENDIF
	2603
	2604	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2605	var = do3d_comp_prec(i)(1:ilen-1)
	2606
	2607	SELECT CASE ( var )
	2608
	2609	CASE ( 'u' )
	2610	j = 1
	2611	CASE ( 'v' )
	2612	j = 2
	2613	CASE ( 'w' )
	2614	j = 3
	2615	CASE ( 'p' )
	2616	j = 4
	2617	CASE ( 'pt' )
	2618	j = 5
	2619
	2620	CASE DEFAULT
[215]	2621	WRITE( message_string, * ) 'unknown variable "', &
	2622	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2623	i, ')'
[226]	2624	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2625
	2626	END SELECT
	2627
	2628	plot_3d_precision(j)%precision = prec
	2629	i = i + 1
	2630
	2631	ENDDO
	2632	ENDIF
	2633
	2634	!
	2635	!-- Check the data output format(s)
	2636	IF ( data_output_format(1) == ' ' ) THEN
	2637	!
	2638	!-- Default value
	2639	netcdf_output = .TRUE.
	2640	ELSE
	2641	i = 1
	2642	DO WHILE ( data_output_format(i) /= ' ' )
	2643
	2644	SELECT CASE ( data_output_format(i) )
	2645
	2646	CASE ( 'netcdf' )
	2647	netcdf_output = .TRUE.
	2648	CASE ( 'iso2d' )
	2649	iso2d_output = .TRUE.
	2650	CASE ( 'profil' )
	2651	profil_output = .TRUE.
	2652	CASE ( 'avs' )
	2653	avs_output = .TRUE.
	2654
	2655	CASE DEFAULT
[215]	2656	message_string = 'unknown value for data_output_format "' // &
	2657	TRIM( data_output_format(i) ) // '"'
[226]	2658	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2659
	2660	END SELECT
	2661
	2662	i = i + 1
	2663	IF ( i > 10 ) EXIT
	2664
	2665	ENDDO
	2666
	2667	ENDIF
	2668
	2669	!
[410]	2670	!-- Check mask conditions
	2671	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2672	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2673	'<= ', max_masks, ' (=max_masks)'
	2674	CALL message( 'check_parameters', 'PA9998', 1, 2, 0, 6, 0 )
	2675	ENDIF
	2676	IF ( masks > 0 ) THEN
	2677	mask_scale(1) = mask_scale_x
	2678	mask_scale(2) = mask_scale_y
	2679	mask_scale(3) = mask_scale_z
	2680	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2681	WRITE( message_string, * ) &
	2682	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2683	'must be > 0.0'
	2684	CALL message( 'check_parameters', 'PA9998', 1, 2, 0, 6, 0 )
	2685	ENDIF
	2686	!
	2687	!-- Generate masks for masked data output
	2688	CALL init_masks
	2689	ENDIF
	2690
	2691	!
[1]	2692	!-- Check netcdf precison
	2693	ldum = .FALSE.
	2694	CALL define_netcdf_header( 'ch', ldum, 0 )
	2695
	2696	!
	2697	!-- Check, whether a constant diffusion coefficient shall be used
	2698	IF ( km_constant /= -1.0 ) THEN
	2699	IF ( km_constant < 0.0 ) THEN
[215]	2700	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2701	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2702	ELSE
	2703	IF ( prandtl_number < 0.0 ) THEN
[215]	2704	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2705	' < 0.0'
[226]	2706	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2707	ENDIF
	2708	constant_diffusion = .TRUE.
	2709
	2710	IF ( prandtl_layer ) THEN
[215]	2711	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2712	'value of km'
[226]	2713	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2714	ENDIF
	2715	ENDIF
	2716	ENDIF
	2717
	2718	!
	2719	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2720	!-- for the horizontal diffusivity used within the outflow damping layer,
	2721	!-- and check/set the width of the damping layer
	2722	IF ( bc_lr /= 'cyclic' ) THEN
	2723	IF ( km_damp_max == -1.0 ) THEN
	2724	km_damp_max = 0.5 * dx
	2725	ENDIF
	2726	IF ( outflow_damping_width == -1.0 ) THEN
	2727	outflow_damping_width = MIN( 20, nx/2 )
	2728	ENDIF
	2729	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2730	message_string = 'outflow_damping width out of range'
[226]	2731	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2732	ENDIF
	2733	ENDIF
	2734
	2735	IF ( bc_ns /= 'cyclic' ) THEN
	2736	IF ( km_damp_max == -1.0 ) THEN
	2737	km_damp_max = 0.5 * dy
	2738	ENDIF
	2739	IF ( outflow_damping_width == -1.0 ) THEN
	2740	outflow_damping_width = MIN( 20, ny/2 )
	2741	ENDIF
	2742	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2743	message_string = 'outflow_damping width out of range'
[226]	2744	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2745	ENDIF
	2746	ENDIF
	2747
	2748	!
	2749	!-- Check value range for rif
	2750	IF ( rif_min >= rif_max ) THEN
[215]	2751	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2752	'than rif_max = ', rif_max
[226]	2753	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2754	ENDIF
	2755
	2756	!
	2757	!-- Determine upper and lower hight level indices for random perturbations
[97]	2758	IF ( disturbance_level_b == -9999999.9 ) THEN
	2759	IF ( ocean ) THEN
	2760	disturbance_level_b = zu((nzt*2)/3)
	2761	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2762	ELSE
	2763	disturbance_level_b = zu(nzb+3)
	2764	disturbance_level_ind_b = nzb + 3
	2765	ENDIF
[1]	2766	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2767	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2768	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2769	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2770	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2771	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2772	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2773	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2774	ELSE
	2775	DO k = 3, nzt-2
	2776	IF ( disturbance_level_b <= zu(k) ) THEN
	2777	disturbance_level_ind_b = k
	2778	EXIT
	2779	ENDIF
	2780	ENDDO
	2781	ENDIF
	2782
[97]	2783	IF ( disturbance_level_t == -9999999.9 ) THEN
	2784	IF ( ocean ) THEN
	2785	disturbance_level_t = zu(nzt-3)
	2786	disturbance_level_ind_t = nzt - 3
	2787	ELSE
	2788	disturbance_level_t = zu(nzt/3)
	2789	disturbance_level_ind_t = nzt / 3
	2790	ENDIF
[1]	2791	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2792	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2793	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2794	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2795	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2796	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2797	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2798	disturbance_level_b
[226]	2799	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2800	ELSE
	2801	DO k = 3, nzt-2
	2802	IF ( disturbance_level_t <= zu(k) ) THEN
	2803	disturbance_level_ind_t = k
	2804	EXIT
	2805	ENDIF
	2806	ENDDO
	2807	ENDIF
	2808
	2809	!
	2810	!-- Check again whether the levels determined this way are ok.
	2811	!-- Error may occur at automatic determination and too few grid points in
	2812	!-- z-direction.
	2813	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2814	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2815	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2816	disturbance_level_b
[226]	2817	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2818	ENDIF
	2819
	2820	!
	2821	!-- Determine the horizontal index range for random perturbations.
	2822	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2823	!-- near the inflow and the perturbation area is further limited to ...(1)
	2824	!-- after the initial phase of the flow.
	2825	dist_nxl = 0; dist_nxr = nx
	2826	dist_nys = 0; dist_nyn = ny
	2827	IF ( bc_lr /= 'cyclic' ) THEN
	2828	IF ( inflow_disturbance_begin == -1 ) THEN
	2829	inflow_disturbance_begin = MIN( 10, nx/2 )
	2830	ENDIF
	2831	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2832	THEN
[215]	2833	message_string = 'inflow_disturbance_begin out of range'
[226]	2834	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2835	ENDIF
	2836	IF ( inflow_disturbance_end == -1 ) THEN
	2837	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2838	ENDIF
	2839	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2840	THEN
[215]	2841	message_string = 'inflow_disturbance_end out of range'
[226]	2842	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2843	ENDIF
	2844	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2845	IF ( inflow_disturbance_begin == -1 ) THEN
	2846	inflow_disturbance_begin = MIN( 10, ny/2 )
	2847	ENDIF
	2848	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2849	THEN
[215]	2850	message_string = 'inflow_disturbance_begin out of range'
[226]	2851	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2852	ENDIF
	2853	IF ( inflow_disturbance_end == -1 ) THEN
	2854	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2855	ENDIF
	2856	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2857	THEN
[215]	2858	message_string = 'inflow_disturbance_end out of range'
[226]	2859	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2860	ENDIF
	2861	ENDIF
	2862
[73]	2863	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2864	dist_nxr = nx - inflow_disturbance_begin
	2865	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2866	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2867	dist_nxl = inflow_disturbance_begin
	2868	dist_nxr(1) = inflow_disturbance_end
[73]	2869	ENDIF
	2870	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2871	dist_nyn = ny - inflow_disturbance_begin
	2872	dist_nys(1) = ny - inflow_disturbance_end
[73]	2873	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2874	dist_nys = inflow_disturbance_begin
	2875	dist_nyn(1) = inflow_disturbance_end
	2876	ENDIF
	2877
	2878	!
[151]	2879	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2880	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2881	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2882	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2883	'condition at the inflow boundary'
[226]	2884	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2885	ENDIF
	2886
	2887	!
	2888	!-- In case of turbulent inflow calculate the index of the recycling plane
	2889	IF ( turbulent_inflow ) THEN
	2890	IF ( recycling_width == 9999999.9 ) THEN
	2891	!
	2892	!-- Set the default value for the width of the recycling domain
	2893	recycling_width = 0.1 * nx * dx
	2894	ELSE
	2895	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2896	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2897	' ', recycling_width
[226]	2898	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	2899	ENDIF
	2900	ENDIF
	2901	!
	2902	!-- Calculate the index
	2903	recycling_plane = recycling_width / dx
	2904	ENDIF
	2905
	2906	!
[1]	2907	!-- Check random generator
	2908	IF ( random_generator /= 'system-specific' .AND. &
	2909	random_generator /= 'numerical-recipes' ) THEN
[215]	2910	message_string = 'unknown random generator: random_generator = "' // &
	2911	TRIM( random_generator ) // '"'
[226]	2912	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2913	ENDIF
	2914
	2915	!
	2916	!-- Determine damping level index for 1D model
	2917	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2918	IF ( damp_level_1d == -1.0 ) THEN
	2919	damp_level_1d = zu(nzt+1)
	2920	damp_level_ind_1d = nzt + 1
	2921	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2922	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2923	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	2924	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	2925	ELSE
	2926	DO k = 1, nzt+1
	2927	IF ( damp_level_1d <= zu(k) ) THEN
	2928	damp_level_ind_1d = k
	2929	EXIT
	2930	ENDIF
	2931	ENDDO
	2932	ENDIF
	2933	ENDIF
[215]	2934
[1]	2935	!
	2936	!-- Check some other 1d-model parameters
	2937	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2938	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2939	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2940	'" is unknown'
[226]	2941	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2942	ENDIF
	2943	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2944	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2945	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2946	'" is unknown'
[226]	2947	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2948	ENDIF
	2949
	2950	!
	2951	!-- Set time for the next user defined restart (time_restart is the
	2952	!-- internal parameter for steering restart events)
	2953	IF ( restart_time /= 9999999.9 ) THEN
[291]	2954	IF ( restart_time > time_since_reference_point ) THEN
	2955	time_restart = restart_time
	2956	ENDIF
[1]	2957	ELSE
	2958	!
	2959	!-- In case of a restart run, set internal parameter to default (no restart)
	2960	!-- if the NAMELIST-parameter restart_time is omitted
	2961	time_restart = 9999999.9
	2962	ENDIF
	2963
	2964	!
	2965	!-- Set default value of the time needed to terminate a model run
	2966	IF ( termination_time_needed == -1.0 ) THEN
	2967	IF ( host(1:3) == 'ibm' ) THEN
	2968	termination_time_needed = 300.0
	2969	ELSE
	2970	termination_time_needed = 35.0
	2971	ENDIF
	2972	ENDIF
	2973
	2974	!
	2975	!-- Check the time needed to terminate a model run
	2976	IF ( host(1:3) == 't3e' ) THEN
	2977	!
	2978	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2979	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2980	IF ( termination_time_needed <= 30.0 ) THEN
[215]	2981	WRITE( message_string, * ) 'termination_time_needed = ', &
	2982	termination_time_needed, ' must be > 30.0 on host "', &
	2983	TRIM( host ), '"'
[226]	2984	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	2985	ENDIF
	2986	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2987	!
	2988	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2989	!-- because the job time consumed before executing palm (for compiling,
	2990	!-- copying of files, etc.) has to be regarded
	2991	IF ( termination_time_needed < 300.0 ) THEN
[215]	2992	WRITE( message_string, * ) 'termination_time_needed = ', &
	2993	termination_time_needed, ' should be >= 300.0 on host "', &
	2994	TRIM( host ), '"'
[226]	2995	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	2996	ENDIF
	2997	ENDIF
	2998
[217]	2999	!
[240]	3000	!-- Check pressure gradient conditions
	3001	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3002	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3003	'w are .TRUE. but one of them must be .FALSE.'
[240]	3004	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3005	ENDIF
	3006	IF ( dp_external ) THEN
	3007	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3008	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3009	' of range'
	3010	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3011	ENDIF
	3012	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3013	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3014	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3015	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3016	ENDIF
	3017	ENDIF
	3018	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3019	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3020	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3021	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3022	ENDIF
[241]	3023	IF ( conserve_volume_flow ) THEN
	3024	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
	3025	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	3026	conserve_volume_flow_mode = 'inflow_profile'
	3027	ELSE
	3028	conserve_volume_flow_mode = 'initial_profiles'
	3029	ENDIF
	3030	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3031	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3032	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3033	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3034	conserve_volume_flow_mode
	3035	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3036	ENDIF
	3037	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
	3038	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
	3039	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
	3040	'require & conserve_volume_flow_mode = ''inflow_profile'''
	3041	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3042	ENDIF
	3043	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3044	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3045	WRITE( message_string, * ) 'cyclic boundary conditions ', &
	3046	'require & conserve_volume_flow_mode = ''initial_profiles''', &
	3047	' or ''bulk_velocity'''
	3048	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3049	ENDIF
	3050	ENDIF
	3051	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3052	( .NOT. conserve_volume_flow .OR. &
	3053	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3054	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
	3055	'conserve_volume_flow = .T. and & ', &
	3056	'conserve_volume_flow_mode = ''bulk_velocity'''
	3057	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3058	ENDIF
[240]	3059
	3060	!
[264]	3061	!-- Check particle attributes
	3062	IF ( particle_color /= 'none' ) THEN
	3063	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3064	particle_color /= 'z' ) THEN
	3065	message_string = 'illegal value for parameter particle_color: ' // &
	3066	TRIM( particle_color)
	3067	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3068	ELSE
	3069	IF ( color_interval(2) <= color_interval(1) ) THEN
	3070	message_string = 'color_interval(2) <= color_interval(1)'
	3071	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3072	ENDIF
	3073	ENDIF
	3074	ENDIF
	3075
	3076	IF ( particle_dvrpsize /= 'none' ) THEN
	3077	IF ( particle_dvrpsize /= 'absw' ) THEN
	3078	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3079	' ' // TRIM( particle_color)
	3080	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3081	ELSE
	3082	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3083	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3084	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3085	ENDIF
	3086	ENDIF
	3087	ENDIF
	3088
	3089	!
[217]	3090	!-- Check &userpar parameters
	3091	CALL user_check_parameters
[1]	3092
[217]	3093
[1]	3094	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |