Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 369

Last change on this file since 369 was 367, checked in by maronga, 15 years ago
adapted for machine lck
Property svn:keywords set to `Id`
File size: 118.2 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[366]	6	! bc_lr_cyc and bc_ns_cyc are set,
[328]	7	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	8	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	9	! Coupling with independent precursor runs.
[264]	10	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	11	! Bugfix: pressure included for profile output
[240]	12	! Check pressure gradient conditions
[256]	13	! topography_grid_convention moved from user_check_parameters
	14	! 'single_street_canyon'
[367]	15	! Added shf* and qsws* to the list of available output data
[226]	16	!
	17	! Former revisions:
	18	! -----------------
	19	! $Id: check_parameters.f90 367 2009-08-25 08:35:52Z raasch $
	20	!
	21	! 222 2009-01-12 16:04:16Z letzel
[217]	22	! +user_check_parameters
[213]	23	! Output of messages replaced by message handling routine.
[206]	24	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	25	! deleted __mpi2 directives
[222]	26	! Check that PALM is called with mrun -K parallel for coupling
[198]	27	!
	28	! 197 2008-09-16 15:29:03Z raasch
[177]	29	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	30	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	31	!
	32	! Strict grid matching along z is not needed for mg-solver.
[153]	33	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	34	! Case of reading data for recycling included in initializing_actions,
[197]	35	! check of turbulent_inflow and calculation of recycling_plane.
	36	! q*2 profile added
[139]	37	!
	38	! 138 2007-11-28 10:03:58Z letzel
[138]	39	! Plant canopy added
[132]	40	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	41	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	42	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	43	!
	44	! 109 2007-08-28 15:26:47Z letzel
[102]	45	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	46	! conditions for temperature and fluxes) in case of coupled runs.
	47	! +profiles for wp and w"e
[104]	48	! Bugfix: Error message concerning output of particle concentration (pc)
	49	! modified
[108]	50	! More checks and more default values for coupled runs
	51	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	52	! cloud_physics = .T.)
	53	! Rayleigh damping for ocean fixed.
[109]	54	! Check and, if necessary, set default value for dt_coupling
[98]	55	!
	56	! 97 2007-06-21 08:23:15Z raasch
[97]	57	! Initial salinity profile is calculated, salinity boundary conditions are
	58	! checked,
[94]	59	! z_max_do1d is checked only in case of ocean = .f.,
[97]	60	! +initial temperature and geostrophic velocity profiles for the ocean version,
	61	! use_pt_reference renamed use_reference
[77]	62	!
[90]	63	! 89 2007-05-25 12:08:31Z raasch
	64	! Check for user-defined profiles
	65	!
[77]	66	! 75 2007-03-22 09:54:05Z raasch
[51]	67	! "by_user" allowed as initializing action, -data_output_ts,
[63]	68	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	69	! and pt_reference are checked, moisture renamed humidity,
[72]	70	! output of precipitation amount/rate and roughnes length + check
[73]	71	! possible negative humidities are avoided in initial profile,
[75]	72	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	73	! revision added to run_description_header
[1]	74	!
[39]	75	! 20 2007-02-26 00:12:32Z raasch
	76	! Temperature and humidity gradients at top are now calculated for nzt+1,
	77	! top_heatflux and respective boundary condition bc_pt_t is checked
	78	!
[3]	79	! RCS Log replace by Id keyword, revision history cleaned up
	80	!
[1]	81	! Revision 1.61 2006/08/04 14:20:25 raasch
	82	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	83	! use_upstream_for_tke, default value for dt_dopts,
	84	! generation of file header moved from routines palm and header to here
	85	!
	86	! Revision 1.1 1997/08/26 06:29:23 raasch
	87	! Initial revision
	88	!
	89	!
	90	! Description:
	91	! ------------
	92	! Check control parameters and deduce further quantities.
	93	!------------------------------------------------------------------------------!
	94
	95	USE arrays_3d
	96	USE constants
	97	USE control_parameters
[264]	98	USE dvrp_variables
[1]	99	USE grid_variables
	100	USE indices
	101	USE model_1d
	102	USE netcdf_control
	103	USE particle_attributes
	104	USE pegrid
	105	USE profil_parameter
	106	USE statistics
	107	USE transpose_indices
	108
	109	IMPLICIT NONE
	110
	111	CHARACTER (LEN=1) :: sq
	112	CHARACTER (LEN=6) :: var
	113	CHARACTER (LEN=7) :: unit
	114	CHARACTER (LEN=8) :: date
	115	CHARACTER (LEN=10) :: time
[102]	116	CHARACTER (LEN=40) :: coupling_string
[1]	117	CHARACTER (LEN=100) :: action
	118
[108]	119	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	120	position, prec
[1]	121	LOGICAL :: found, ldum
[291]	122	REAL :: gradient, maxn, maxp, remote = 0.0, &
	123	simulation_time_since_reference
[1]	124
	125	!
	126	!-- Warning, if host is not set
	127	IF ( host(1:1) == ' ' ) THEN
[213]	128	message_string = '"host" is not set. Please check that environment ' // &
	129	'variable "localhost" & is set before running PALM'
[226]	130	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	131	ENDIF
	132
	133	!
[102]	134	!-- Check the coupling mode
	135	IF ( coupling_mode /= 'uncoupled' .AND. &
	136	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	137	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	138	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	139	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	140	ENDIF
	141
	142	!
[108]	143	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	144	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	145
[108]	146	IF ( dt_coupling == 9999999.9 ) THEN
[213]	147	message_string = 'dt_coupling is not set but required for coup' // &
	148	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	149	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	150	ENDIF
[213]	151
[206]	152	#if defined( __parallel )
	153	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	154	ierr )
	155	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	156	status, ierr )
[108]	157	IF ( dt_coupling /= remote ) THEN
[213]	158	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	159	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	160	'dt_coupling_remote = ', remote
[226]	161	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	162	ENDIF
[109]	163	IF ( dt_coupling <= 0.0 ) THEN
[206]	164	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	165	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	166	status, ierr )
[109]	167	dt_coupling = MAX( dt_max, remote )
[213]	168	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	169	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	170	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	171	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	172	ENDIF
[213]	173
[206]	174	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	175	ierr )
	176	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	177	status, ierr )
[108]	178	IF ( restart_time /= remote ) THEN
[213]	179	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	180	'": restart_time = ', restart_time, '& is not equal to ', &
	181	'restart_time_remote = ', remote
[226]	182	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	183	ENDIF
[213]	184
[206]	185	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	186	ierr )
	187	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	188	status, ierr )
[108]	189	IF ( dt_restart /= remote ) THEN
[213]	190	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	191	'": dt_restart = ', dt_restart, '& is not equal to ', &
	192	'dt_restart_remote = ', remote
[226]	193	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	194	ENDIF
[213]	195
[291]	196	simulation_time_since_reference = end_time - coupling_start_time
	197	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	198	14, comm_inter, ierr )
[206]	199	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	200	status, ierr )
[291]	201	IF ( simulation_time_since_reference /= remote ) THEN
[213]	202	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	203	'": simulation_time_since_reference = ', &
	204	simulation_time_since_reference, '& is not equal to ', &
	205	'simulation_time_since_reference_remote = ', remote
[226]	206	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	207	ENDIF
[213]	208
[206]	209	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	210	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	211	status, ierr )
[108]	212	IF ( dx /= remote ) THEN
[213]	213	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	214	'": dx = ', dx, '& is not equal to dx_remote = ', remote
[226]	215	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
[108]	216	ENDIF
[213]	217
[206]	218	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	219	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	220	status, ierr )
[108]	221	IF ( dy /= remote ) THEN
[213]	222	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	223	'": dy = ', dy, '& is not equal to dy_remote = ', remote
[226]	224	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
[108]	225	ENDIF
[213]	226
[206]	227	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	228	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	229	status, ierr )
[108]	230	IF ( nx /= iremote ) THEN
[213]	231	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	232	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
[226]	233	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
[108]	234	ENDIF
[213]	235
[206]	236	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	237	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	238	status, ierr )
[108]	239	IF ( ny /= iremote ) THEN
[213]	240	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	241	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
[226]	242	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
[108]	243	ENDIF
[222]	244	#else
	245	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	246	' ''mrun -K parallel'''
[226]	247	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	248	#endif
	249	ENDIF
	250
[206]	251	#if defined( __parallel )
[108]	252	!
	253	!-- Exchange via intercommunicator
	254	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	255	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	256	ierr )
[108]	257	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	258	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	259	comm_inter, status, ierr )
[108]	260	ENDIF
	261	#endif
	262
	263
	264	!
[1]	265	!-- Generate the file header which is used as a header for most of PALM's
	266	!-- output files
	267	CALL DATE_AND_TIME( date, time )
	268	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	269	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	270	IF ( coupling_mode == 'uncoupled' ) THEN
	271	coupling_string = ''
	272	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	273	coupling_string = ' coupled (atmosphere)'
	274	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	275	coupling_string = ' coupled (ocean)'
	276	ENDIF
[1]	277
[102]	278	WRITE ( run_description_header, &
	279	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	280	TRIM( version ), TRIM( revision ), 'run: ', &
	281	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	282	'host: ', TRIM( host ), run_date, run_time
[1]	283
	284	!
[63]	285	!-- Check the general loop optimization method
	286	IF ( loop_optimization == 'default' ) THEN
	287	IF ( host(1:3) == 'nec' ) THEN
	288	loop_optimization = 'vector'
	289	ELSE
	290	loop_optimization = 'cache'
	291	ENDIF
	292	ENDIF
	293	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	294	.AND. loop_optimization /= 'vector' ) THEN
[213]	295	message_string = 'illegal value given for loop_optimization: "' // &
	296	TRIM( loop_optimization ) // '"'
[226]	297	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	298	ENDIF
	299
	300	!
[1]	301	!-- Check topography setting (check for illegal parameter combinations)
	302	IF ( topography /= 'flat' ) THEN
	303	action = ' '
	304	IF ( scalar_advec /= 'pw-scheme' ) THEN
	305	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	306	ENDIF
	307	IF ( momentum_advec /= 'pw-scheme' ) THEN
	308	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	309	ENDIF
[51]	310	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	311	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	312	ENDIF
[114]	313	IF ( psolver == 'sor' ) THEN
[1]	314	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	315	ENDIF
	316	IF ( sloping_surface ) THEN
	317	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	318	ENDIF
	319	IF ( galilei_transformation ) THEN
	320	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	321	ENDIF
	322	IF ( cloud_physics ) THEN
	323	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	324	ENDIF
	325	IF ( cloud_droplets ) THEN
	326	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	327	ENDIF
[75]	328	IF ( humidity ) THEN
	329	WRITE( action, '(A)' ) 'humidity = .TRUE.'
[1]	330	ENDIF
	331	IF ( .NOT. prandtl_layer ) THEN
	332	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	333	ENDIF
	334	IF ( action /= ' ' ) THEN
[213]	335	message_string = 'a non-flat topography does not allow ' // &
	336	TRIM( action )
[226]	337	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	338	ENDIF
[256]	339	!
	340	!-- In case of non-flat topography, check whether the convention how to
	341	!-- define the topography grid has been set correctly, or whether the default
	342	!-- is applicable. If this is not possible, abort.
	343	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	344	IF ( TRIM( topography ) /= 'single_building' .AND. &
	345	TRIM( topography ) /= 'single_street_canyon' .AND. &
	346	TRIM( topography ) /= 'read_from_file' ) THEN
	347	!-- The default value is not applicable here, because it is only valid
	348	!-- for the two standard cases 'single_building' and 'read_from_file'
	349	!-- defined in init_grid.
	350	WRITE( message_string, * ) &
	351	'The value for "topography_grid_convention" ', &
	352	'is not set. Its default value is & only valid for ', &
	353	'"topography" = ''single_building'', ', &
	354	'''single_street_canyon'' & or ''read_from_file''.', &
	355	' & Choose ''cell_edge'' or ''cell_center''.'
	356	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	357	ELSE
	358	!-- The default value is applicable here.
	359	!-- Set convention according to topography.
	360	IF ( TRIM( topography ) == 'single_building' .OR. &
	361	TRIM( topography ) == 'single_street_canyon' ) THEN
	362	topography_grid_convention = 'cell_edge'
	363	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	364	topography_grid_convention = 'cell_center'
	365	ENDIF
	366	ENDIF
	367	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	368	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	369	WRITE( message_string, * ) &
	370	'The value for "topography_grid_convention" is ', &
	371	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	372	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	373	ENDIF
	374
[1]	375	ENDIF
[94]	376
[1]	377	!
[94]	378	!-- Check ocean setting
	379	IF ( ocean ) THEN
[332]	380
[94]	381	action = ' '
	382	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	383	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	384	ENDIF
[97]	385	IF ( momentum_advec == 'ups-scheme' ) THEN
	386	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	387	ENDIF
[94]	388	IF ( action /= ' ' ) THEN
[213]	389	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	390	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	391	ENDIF
	392
[332]	393	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	394	TRIM( coupling_char ) == '_O' ) THEN
[343]	395
[94]	396	!
[332]	397	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	398	!-- ocean run (this setting is done via mrun-option -y)
[343]	399
[291]	400	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	401	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	402	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	403
[291]	404	ENDIF
	405
	406	!
[1]	407	!-- Check whether there are any illegal values
	408	!-- Pressure solver:
	409	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	410	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	411	message_string = 'unknown solver for perturbation pressure: psolver' // &
	412	' = "' // TRIM( psolver ) // '"'
[226]	413	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	414	ENDIF
	415
	416	#if defined( __parallel )
	417	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	418	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	419	'for a 1d domain-decomposition along x & please do' // &
	420	' not set npey/=1 in the parameter file'
[226]	421	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	422	ENDIF
[181]	423	IF ( psolver == 'poisfft_hybrid' .AND. &
	424	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	425	psolver == 'multigrid' .AND. &
	426	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	427	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	428	'work for subdomains with unequal size & please ' // &
	429	'set grid_matching = ''strict'' in the parameter file'
[226]	430	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	431	ENDIF
	432	#else
	433	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	434	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	435	' for a parallel environment'
[226]	436	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	437	ENDIF
	438	#endif
	439
	440	IF ( psolver == 'multigrid' ) THEN
	441	IF ( cycle_mg == 'w' ) THEN
	442	gamma_mg = 2
	443	ELSEIF ( cycle_mg == 'v' ) THEN
	444	gamma_mg = 1
	445	ELSE
[213]	446	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	447	TRIM( cycle_mg ) // '"'
[226]	448	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	449	ENDIF
	450	ENDIF
	451
	452	IF ( fft_method /= 'singleton-algorithm' .AND. &
	453	fft_method /= 'temperton-algorithm' .AND. &
	454	fft_method /= 'system-specific' ) THEN
[213]	455	message_string = 'unknown fft-algorithm: fft_method = "' // &
	456	TRIM( fft_method ) // '"'
[226]	457	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	458	ENDIF
	459
	460	!
	461	!-- Advection schemes:
	462	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	463	THEN
[214]	464	message_string = 'unknown advection scheme: momentum_advec = "' // &
	465	TRIM( momentum_advec ) // '"'
[226]	466	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	467	ENDIF
	468	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	469	.AND. timestep_scheme /= 'euler' ) THEN
[214]	470	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	471	'" is not allowed with timestep_scheme = "' // &
	472	TRIM( timestep_scheme ) // '"'
[226]	473	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	474	ENDIF
	475
	476	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	477	scalar_advec /= 'ups-scheme' ) THEN
[214]	478	message_string = 'unknown advection scheme: scalar_advec = "' // &
	479	TRIM( scalar_advec ) // '"'
[226]	480	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	481	ENDIF
	482
	483	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	484	use_upstream_for_tke = .TRUE.
[214]	485	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	486	'use_sgs_for_particles = .TRUE.'
[226]	487	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	488	ENDIF
	489
	490	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	491	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	492	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	493	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	494	ENDIF
	495
	496	!
	497	!-- Timestep schemes:
	498	SELECT CASE ( TRIM( timestep_scheme ) )
	499
	500	CASE ( 'euler' )
	501	intermediate_timestep_count_max = 1
	502	asselin_filter_factor = 0.0
	503
	504	CASE ( 'leapfrog', 'leapfrog+euler' )
	505	intermediate_timestep_count_max = 1
	506
	507	CASE ( 'runge-kutta-2' )
	508	intermediate_timestep_count_max = 2
	509	asselin_filter_factor = 0.0
	510
	511	CASE ( 'runge-kutta-3' )
	512	intermediate_timestep_count_max = 3
	513	asselin_filter_factor = 0.0
	514
	515	CASE DEFAULT
[214]	516	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	517	TRIM( timestep_scheme ) // '"'
[226]	518	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	519
	520	END SELECT
	521
[63]	522	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	523	THEN
[214]	524	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	525	'" & does not work with timestep_scheme "' // &
	526	TRIM( timestep_scheme ) // '"'
[226]	527	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	528	ENDIF
	529
	530	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	531	THEN
[214]	532	message_string = 'momentum advection scheme "' // &
	533	TRIM( momentum_advec ) // '" & does not work with ' // &
	534	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	535	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	536	ENDIF
	537
[147]	538	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	539	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	540	!
[214]	541	!-- No restart run: several initialising actions are possible
[1]	542	action = initializing_actions
	543	DO WHILE ( TRIM( action ) /= '' )
	544	position = INDEX( action, ' ' )
	545	SELECT CASE ( action(1:position-1) )
	546
	547	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	548	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	549	action = action(position+1:)
	550
	551	CASE DEFAULT
[214]	552	message_string = 'initializing_action = "' // &
	553	TRIM( action ) // '" unkown or not allowed'
[226]	554	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	555
	556	END SELECT
	557	ENDDO
	558	ENDIF
[214]	559
[1]	560	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	561	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	562	message_string = 'initializing_actions = "set_constant_profiles"' // &
	563	' and "set_1d-model_profiles" are not allowed ' // &
	564	'simultaneously'
[226]	565	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	566	ENDIF
[214]	567
[46]	568	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	569	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	570	message_string = 'initializing_actions = "set_constant_profiles"' // &
	571	' and "by_user" are not allowed simultaneously'
[226]	572	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	573	ENDIF
[214]	574
[46]	575	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	576	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	577	message_string = 'initializing_actions = "by_user" and ' // &
	578	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	579	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	580	ENDIF
[1]	581
[75]	582	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	583	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	584	'not allowed with humidity = ', humidity
[226]	585	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	586	ENDIF
	587
[72]	588	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	589	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	590	'not allowed with cloud_physics = ', cloud_physics
[226]	591	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	592	ENDIF
	593
[75]	594	IF ( humidity .AND. sloping_surface ) THEN
[214]	595	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	596	'are not allowed simultaneously'
[226]	597	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	598	ENDIF
	599
[75]	600	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	601	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	602	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	603	ENDIF
	604
[75]	605	IF ( passive_scalar .AND. humidity ) THEN
[214]	606	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	607	'is not allowed simultaneously'
[226]	608	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	609	ENDIF
	610
	611	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	612	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	613	' = .TRUE.'
[226]	614	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	615	ENDIF
	616
	617	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	618	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	619	'" found for parameter grid_matching'
[226]	620	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	621	ENDIF
	622
[138]	623	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	624	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	625	'coefficient & given value is drag_coefficient = 0.0'
[226]	626	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	627	ENDIF
	628
[1]	629	!
	630	!-- In case of no model continuation run, check initialising parameters and
	631	!-- deduce further quantities
	632	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	633
	634	!
	635	!-- Initial profiles for 1D and 3D model, respectively
	636	u_init = ug_surface
	637	v_init = vg_surface
	638	pt_init = pt_surface
[94]	639	IF ( humidity ) q_init = q_surface
	640	IF ( ocean ) sa_init = sa_surface
	641	IF ( passive_scalar ) q_init = s_surface
[138]	642	IF ( plant_canopy ) lad = 0.0
[1]	643
	644	!
	645	!--
	646	!-- If required, compute initial profile of the geostrophic wind
	647	!-- (component ug)
	648	i = 1
	649	gradient = 0.0
[97]	650
	651	IF ( .NOT. ocean ) THEN
	652
	653	ug_vertical_gradient_level_ind(1) = 0
	654	ug(0) = ug_surface
	655	DO k = 1, nzt+1
[177]	656	IF ( i < 11 ) THEN
	657	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	658	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	659	gradient = ug_vertical_gradient(i) / 100.0
	660	ug_vertical_gradient_level_ind(i) = k - 1
	661	i = i + 1
[1]	662	ENDIF
[177]	663	ENDIF
[97]	664	IF ( gradient /= 0.0 ) THEN
	665	IF ( k /= 1 ) THEN
	666	ug(k) = ug(k-1) + dzu(k) * gradient
	667	ELSE
	668	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	669	ENDIF
[1]	670	ELSE
[97]	671	ug(k) = ug(k-1)
[1]	672	ENDIF
[97]	673	ENDDO
[1]	674
[97]	675	ELSE
	676
	677	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	678	ug(nzt+1) = ug_surface
[97]	679	DO k = nzt, 0, -1
[177]	680	IF ( i < 11 ) THEN
	681	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	682	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	683	gradient = ug_vertical_gradient(i) / 100.0
	684	ug_vertical_gradient_level_ind(i) = k + 1
	685	i = i + 1
[97]	686	ENDIF
	687	ENDIF
	688	IF ( gradient /= 0.0 ) THEN
	689	IF ( k /= nzt ) THEN
	690	ug(k) = ug(k+1) - dzu(k+1) * gradient
	691	ELSE
	692	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	693	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	694	ENDIF
	695	ELSE
	696	ug(k) = ug(k+1)
	697	ENDIF
	698	ENDDO
	699
	700	ENDIF
	701
[1]	702	u_init = ug
	703
	704	!
	705	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	706	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	707	ug_vertical_gradient_level(1) = 0.0
	708	ENDIF
	709
	710	!
	711	!--
	712	!-- If required, compute initial profile of the geostrophic wind
	713	!-- (component vg)
	714	i = 1
	715	gradient = 0.0
[97]	716
	717	IF ( .NOT. ocean ) THEN
	718
	719	vg_vertical_gradient_level_ind(1) = 0
	720	vg(0) = vg_surface
	721	DO k = 1, nzt+1
[177]	722	IF ( i < 11 ) THEN
	723	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	724	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	725	gradient = vg_vertical_gradient(i) / 100.0
	726	vg_vertical_gradient_level_ind(i) = k - 1
	727	i = i + 1
[1]	728	ENDIF
	729	ENDIF
[97]	730	IF ( gradient /= 0.0 ) THEN
	731	IF ( k /= 1 ) THEN
	732	vg(k) = vg(k-1) + dzu(k) * gradient
	733	ELSE
	734	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	735	ENDIF
[1]	736	ELSE
[97]	737	vg(k) = vg(k-1)
[1]	738	ENDIF
[97]	739	ENDDO
[1]	740
[97]	741	ELSE
	742
[121]	743	vg_vertical_gradient_level_ind(1) = nzt+1
	744	vg(nzt+1) = vg_surface
[97]	745	DO k = nzt, 0, -1
[177]	746	IF ( i < 11 ) THEN
	747	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	748	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	749	gradient = vg_vertical_gradient(i) / 100.0
	750	vg_vertical_gradient_level_ind(i) = k + 1
	751	i = i + 1
[97]	752	ENDIF
	753	ENDIF
	754	IF ( gradient /= 0.0 ) THEN
	755	IF ( k /= nzt ) THEN
	756	vg(k) = vg(k+1) - dzu(k+1) * gradient
	757	ELSE
	758	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	759	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	760	ENDIF
	761	ELSE
	762	vg(k) = vg(k+1)
	763	ENDIF
	764	ENDDO
	765
	766	ENDIF
	767
[1]	768	v_init = vg
	769
	770	!
	771	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	772	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	773	vg_vertical_gradient_level(1) = 0.0
	774	ENDIF
	775
	776	!
[94]	777	!-- Compute initial temperature profile using the given temperature gradients
[1]	778	i = 1
	779	gradient = 0.0
[94]	780
	781	IF ( .NOT. ocean ) THEN
	782
	783	pt_vertical_gradient_level_ind(1) = 0
	784	DO k = 1, nzt+1
[177]	785	IF ( i < 11 ) THEN
	786	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	787	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	788	gradient = pt_vertical_gradient(i) / 100.0
	789	pt_vertical_gradient_level_ind(i) = k - 1
	790	i = i + 1
[1]	791	ENDIF
	792	ENDIF
[94]	793	IF ( gradient /= 0.0 ) THEN
	794	IF ( k /= 1 ) THEN
	795	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	796	ELSE
	797	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	798	ENDIF
[1]	799	ELSE
[94]	800	pt_init(k) = pt_init(k-1)
[1]	801	ENDIF
[94]	802	ENDDO
[1]	803
[94]	804	ELSE
	805
	806	pt_vertical_gradient_level_ind(1) = nzt+1
	807	DO k = nzt, 0, -1
[177]	808	IF ( i < 11 ) THEN
	809	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	810	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	811	gradient = pt_vertical_gradient(i) / 100.0
	812	pt_vertical_gradient_level_ind(i) = k + 1
	813	i = i + 1
[94]	814	ENDIF
	815	ENDIF
	816	IF ( gradient /= 0.0 ) THEN
	817	IF ( k /= nzt ) THEN
	818	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	819	ELSE
	820	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	821	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	822	ENDIF
	823	ELSE
	824	pt_init(k) = pt_init(k+1)
	825	ENDIF
	826	ENDDO
	827
	828	ENDIF
	829
[1]	830	!
	831	!-- In case of no given temperature gradients, choose gradient of neutral
	832	!-- stratification
[94]	833	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	834	pt_vertical_gradient_level(1) = 0.0
	835	ENDIF
	836
	837	!
[94]	838	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	839	!-- boundary condition
[19]	840	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	841
	842	!
	843	!-- If required, compute initial humidity or scalar profile using the given
	844	!-- humidity/scalar gradient. In case of scalar transport, initially store
	845	!-- values of the scalar parameters on humidity parameters
	846	IF ( passive_scalar ) THEN
	847	bc_q_b = bc_s_b
	848	bc_q_t = bc_s_t
	849	q_surface = s_surface
	850	q_surface_initial_change = s_surface_initial_change
	851	q_vertical_gradient = s_vertical_gradient
	852	q_vertical_gradient_level = s_vertical_gradient_level
	853	surface_waterflux = surface_scalarflux
	854	ENDIF
	855
[75]	856	IF ( humidity .OR. passive_scalar ) THEN
[1]	857
	858	i = 1
	859	gradient = 0.0
	860	q_vertical_gradient_level_ind(1) = 0
	861	DO k = 1, nzt+1
[177]	862	IF ( i < 11 ) THEN
	863	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	864	q_vertical_gradient_level(i) >= 0.0 ) THEN
	865	gradient = q_vertical_gradient(i) / 100.0
	866	q_vertical_gradient_level_ind(i) = k - 1
	867	i = i + 1
[1]	868	ENDIF
	869	ENDIF
	870	IF ( gradient /= 0.0 ) THEN
	871	IF ( k /= 1 ) THEN
	872	q_init(k) = q_init(k-1) + dzu(k) * gradient
	873	ELSE
	874	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	875	ENDIF
	876	ELSE
	877	q_init(k) = q_init(k-1)
	878	ENDIF
[72]	879	!
	880	!-- Avoid negative humidities
	881	IF ( q_init(k) < 0.0 ) THEN
	882	q_init(k) = 0.0
	883	ENDIF
[1]	884	ENDDO
	885
	886	!
	887	!-- In case of no given humidity gradients, choose zero gradient
	888	!-- conditions
	889	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	890	q_vertical_gradient_level(1) = 0.0
	891	ENDIF
	892
	893	!
	894	!-- Store humidity gradient at the top boundary for possile Neumann
	895	!-- boundary condition
[19]	896	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	897
	898	ENDIF
	899
[94]	900	!
	901	!-- If required, compute initial salinity profile using the given salinity
	902	!-- gradients
	903	IF ( ocean ) THEN
	904
	905	i = 1
	906	gradient = 0.0
	907
	908	sa_vertical_gradient_level_ind(1) = nzt+1
	909	DO k = nzt, 0, -1
[177]	910	IF ( i < 11 ) THEN
	911	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	912	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	913	gradient = sa_vertical_gradient(i) / 100.0
	914	sa_vertical_gradient_level_ind(i) = k + 1
	915	i = i + 1
[94]	916	ENDIF
	917	ENDIF
	918	IF ( gradient /= 0.0 ) THEN
	919	IF ( k /= nzt ) THEN
	920	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	921	ELSE
	922	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	923	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	924	ENDIF
	925	ELSE
	926	sa_init(k) = sa_init(k+1)
	927	ENDIF
	928	ENDDO
	929
	930	ENDIF
	931
[138]	932	!
	933	!-- If required compute the profile of leaf area density used in the plant canopy model
	934	IF ( plant_canopy ) THEN
	935
	936	i = 1
	937	gradient = 0.0
[1]	938
[138]	939	IF ( .NOT. ocean ) THEN
[153]	940
	941	lad(0) = lad_surface
[138]	942
	943	lad_vertical_gradient_level_ind(1) = 0
	944	DO k = 1, pch_index
[177]	945	IF ( i < 11 ) THEN
	946	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	947	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	948	gradient = lad_vertical_gradient(i)
	949	lad_vertical_gradient_level_ind(i) = k - 1
	950	i = i + 1
[138]	951	ENDIF
	952	ENDIF
	953	IF ( gradient /= 0.0 ) THEN
	954	IF ( k /= 1 ) THEN
	955	lad(k) = lad(k-1) + dzu(k) * gradient
	956	ELSE
	957	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	958	ENDIF
	959	ELSE
	960	lad(k) = lad(k-1)
	961	ENDIF
	962	ENDDO
	963
	964	ENDIF
	965
[1]	966	!
[138]	967	!-- In case of no given leaf area density gradients, choose a vanishing gradient
	968	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	969	lad_vertical_gradient_level(1) = 0.0
	970	ENDIF
	971
	972	ENDIF
	973
	974	ENDIF
	975
	976	!
[1]	977	!-- Compute Coriolis parameter
	978	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	979	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	980
	981	!
[97]	982	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	983	!-- set the reference temperature equal to the surface temperature.
	984	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	985
	986	!
[97]	987	!-- Reference value has to be used in buoyancy terms
	988	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	989
	990	!
	991	!-- Sign of buoyancy/stability terms
	992	IF ( ocean ) atmos_ocean_sign = -1.0
	993
	994	!
[108]	995	!-- Ocean version must use flux boundary conditions at the top
	996	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	997	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	998	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	999	ENDIF
[97]	1000
	1001	!
[1]	1002	!-- In case of a given slope, compute the relevant quantities
	1003	IF ( alpha_surface /= 0.0 ) THEN
	1004	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1005	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1006	' ) must be < 90.0'
[226]	1007	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1008	ENDIF
	1009	sloping_surface = .TRUE.
	1010	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1011	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1012	ENDIF
	1013
	1014	!
	1015	!-- Check time step and cfl_factor
	1016	IF ( dt /= -1.0 ) THEN
	1017	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1018	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1019	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1020	ENDIF
	1021	dt_3d = dt
	1022	dt_fixed = .TRUE.
	1023	ENDIF
	1024
	1025	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1026	IF ( cfl_factor == -1.0 ) THEN
	1027	IF ( momentum_advec == 'ups-scheme' .OR. &
	1028	scalar_advec == 'ups-scheme' ) THEN
	1029	cfl_factor = 0.8
	1030	ELSE
	1031	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1032	cfl_factor = 0.8
	1033	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1034	cfl_factor = 0.9
	1035	ELSE
	1036	cfl_factor = 0.1
	1037	ENDIF
	1038	ENDIF
	1039	ELSE
[215]	1040	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1041	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1042	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1043	ENDIF
	1044	ENDIF
	1045
	1046	!
	1047	!-- Store simulated time at begin
	1048	simulated_time_at_begin = simulated_time
	1049
	1050	!
[291]	1051	!-- Store reference time for coupled runs and change the coupling flag,
	1052	!-- if ...
	1053	IF ( simulated_time == 0.0 ) THEN
	1054	IF ( coupling_start_time == 0.0 ) THEN
	1055	time_since_reference_point = 0.0
	1056	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1057	run_coupled = .FALSE.
	1058	ENDIF
	1059	ENDIF
	1060
	1061	!
[1]	1062	!-- Set wind speed in the Galilei-transformed system
	1063	IF ( galilei_transformation ) THEN
	1064	IF ( use_ug_for_galilei_tr .AND. &
	1065	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1066	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1067	u_gtrans = ug_surface
	1068	v_gtrans = vg_surface
	1069	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1070	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1071	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1072	' with galilei transformation'
[226]	1073	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1074	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1075	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1076	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1077	' with galilei transformation'
[226]	1078	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1079	ELSE
[215]	1080	message_string = 'variable translation speed used for galilei-' // &
	1081	'transformation, which may cause & instabilities in stably ' // &
	1082	'stratified regions'
[226]	1083	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1084	ENDIF
	1085	ENDIF
	1086
	1087	!
	1088	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1089	!-- fluxes have to be used in the diffusion-terms
	1090	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1091
	1092	!
	1093	!-- Check boundary conditions and set internal variables:
	1094	!-- Lateral boundary conditions
[73]	1095	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1096	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1097	message_string = 'unknown boundary condition: bc_lr = "' // &
	1098	TRIM( bc_lr ) // '"'
[226]	1099	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1100	ENDIF
[73]	1101	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1102	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1103	message_string = 'unknown boundary condition: bc_ns = "' // &
	1104	TRIM( bc_ns ) // '"'
[226]	1105	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1106	ENDIF
	1107
	1108	!
[366]	1109	!-- Internal variables used for speed optimization in if clauses
	1110	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1111	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1112
	1113	!
[1]	1114	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1115	!-- Willimas advection scheme. Several schemes and tools do not work with
	1116	!-- non-cyclic boundary conditions.
	1117	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1118	IF ( psolver /= 'multigrid' ) THEN
[215]	1119	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1120	'psolver = "' // TRIM( psolver ) // '"'
[226]	1121	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1122	ENDIF
	1123	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1124	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1125	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1126	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1127	ENDIF
	1128	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1129	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1130	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1131	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1132	ENDIF
	1133	IF ( galilei_transformation ) THEN
[215]	1134	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1135	'galilei_transformation = .T.'
[226]	1136	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1137	ENDIF
	1138	ENDIF
	1139
	1140	!
	1141	!-- Bottom boundary condition for the turbulent Kinetic energy
	1142	IF ( bc_e_b == 'neumann' ) THEN
	1143	ibc_e_b = 1
	1144	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1145	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1146	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1147	ENDIF
	1148	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1149	ibc_e_b = 2
	1150	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1151	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1152	TRIM( bc_e_b ) // '"'
[226]	1153	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1154	ENDIF
	1155	IF ( .NOT. prandtl_layer ) THEN
	1156	bc_e_b = 'neumann'
	1157	ibc_e_b = 1
[215]	1158	message_string = 'boundary condition bc_e_b changed to "' // &
	1159	TRIM( bc_e_b ) // '"'
[226]	1160	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1161	ENDIF
	1162	ELSE
[215]	1163	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1164	TRIM( bc_e_b ) // '"'
[226]	1165	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1166	ENDIF
	1167
	1168	!
	1169	!-- Boundary conditions for perturbation pressure
	1170	IF ( bc_p_b == 'dirichlet' ) THEN
	1171	ibc_p_b = 0
	1172	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1173	ibc_p_b = 1
	1174	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1175	ibc_p_b = 2
	1176	ELSE
[215]	1177	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1178	TRIM( bc_p_b ) // '"'
[226]	1179	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1180	ENDIF
	1181	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1182	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1183	'" not allowed with prandtl_layer = .FALSE.'
[226]	1184	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1185	ENDIF
	1186	IF ( bc_p_t == 'dirichlet' ) THEN
	1187	ibc_p_t = 0
	1188	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1189	ibc_p_t = 1
	1190	ELSE
[215]	1191	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1192	TRIM( bc_p_t ) // '"'
[226]	1193	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1194	ENDIF
	1195
	1196	!
	1197	!-- Boundary conditions for potential temperature
[102]	1198	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1199	ibc_pt_b = 2
[1]	1200	ELSE
[102]	1201	IF ( bc_pt_b == 'dirichlet' ) THEN
	1202	ibc_pt_b = 0
	1203	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1204	ibc_pt_b = 1
	1205	ELSE
[215]	1206	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1207	TRIM( bc_pt_b ) // '"'
[226]	1208	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1209	ENDIF
	1210	ENDIF
[102]	1211
[1]	1212	IF ( bc_pt_t == 'dirichlet' ) THEN
	1213	ibc_pt_t = 0
	1214	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1215	ibc_pt_t = 1
[19]	1216	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1217	ibc_pt_t = 2
[1]	1218	ELSE
[215]	1219	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1220	TRIM( bc_pt_t ) // '"'
[226]	1221	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1222	ENDIF
	1223
[20]	1224	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1225	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1226	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1227	top_momentumflux_v /= 9999999.9 ) THEN
	1228	constant_top_momentumflux = .TRUE.
	1229	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1230	top_momentumflux_v == 9999999.9 ) ) THEN
	1231	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1232	'must be set'
[226]	1233	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1234	ENDIF
[1]	1235
	1236	!
	1237	!-- A given surface temperature implies Dirichlet boundary condition for
	1238	!-- temperature. In this case specification of a constant heat flux is
	1239	!-- forbidden.
	1240	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1241	surface_heatflux /= 0.0 ) THEN
[215]	1242	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1243	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1244	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1245	ENDIF
	1246	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1247	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1248	'wed with pt_surface_initial_change (/=0) = ', &
	1249	pt_surface_initial_change
[226]	1250	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1251	ENDIF
	1252
	1253	!
[19]	1254	!-- A given temperature at the top implies Dirichlet boundary condition for
	1255	!-- temperature. In this case specification of a constant heat flux is
	1256	!-- forbidden.
	1257	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1258	top_heatflux /= 0.0 ) THEN
[215]	1259	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1260	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1261	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1262	ENDIF
	1263
	1264	!
[95]	1265	!-- Boundary conditions for salinity
	1266	IF ( ocean ) THEN
	1267	IF ( bc_sa_t == 'dirichlet' ) THEN
	1268	ibc_sa_t = 0
	1269	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1270	ibc_sa_t = 1
	1271	ELSE
[215]	1272	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1273	TRIM( bc_sa_t ) // '"'
[226]	1274	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1275	ENDIF
	1276
	1277	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1278	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1279	message_string = 'boundary condition: bc_sa_t = "' // &
	1280	TRIM( bc_sa_t ) // '" requires to set ' // &
	1281	'top_salinityflux'
[226]	1282	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1283	ENDIF
[95]	1284
	1285	!
	1286	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1287	!-- salinity. In this case specification of a constant salinity flux is
	1288	!-- forbidden.
	1289	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1290	top_salinityflux /= 0.0 ) THEN
[215]	1291	message_string = 'boundary condition: bc_sa_t = "' // &
	1292	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1293	'constant_top_salinityflux = .TRUE.'
[226]	1294	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1295	ENDIF
	1296
	1297	ENDIF
	1298
	1299	!
[75]	1300	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1301	!-- water content / scalar
[75]	1302	IF ( humidity .OR. passive_scalar ) THEN
	1303	IF ( humidity ) THEN
[1]	1304	sq = 'q'
	1305	ELSE
	1306	sq = 's'
	1307	ENDIF
	1308	IF ( bc_q_b == 'dirichlet' ) THEN
	1309	ibc_q_b = 0
	1310	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1311	ibc_q_b = 1
	1312	ELSE
[215]	1313	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1314	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1315	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1316	ENDIF
	1317	IF ( bc_q_t == 'dirichlet' ) THEN
	1318	ibc_q_t = 0
	1319	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1320	ibc_q_t = 1
	1321	ELSE
[215]	1322	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1323	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1324	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1325	ENDIF
	1326
	1327	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1328
	1329	!
	1330	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1331	!-- humidity. In this case specification of a constant water flux is
[1]	1332	!-- forbidden.
	1333	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1334	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1335	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1336	'th prescribed surface flux'
[226]	1337	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1338	ENDIF
	1339	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1340	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1341	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1342	q_surface_initial_change
[226]	1343	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1344	ENDIF
	1345
	1346	ENDIF
	1347
	1348	!
	1349	!-- Boundary conditions for horizontal components of wind speed
	1350	IF ( bc_uv_b == 'dirichlet' ) THEN
	1351	ibc_uv_b = 0
	1352	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1353	ibc_uv_b = 1
	1354	IF ( prandtl_layer ) THEN
[215]	1355	message_string = 'boundary condition: bc_uv_b = "' // &
	1356	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1357	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1358	ENDIF
	1359	ELSE
[215]	1360	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1361	TRIM( bc_uv_b ) // '"'
[226]	1362	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1363	ENDIF
[215]	1364
[108]	1365	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1366	bc_uv_t = 'neumann'
[1]	1367	ibc_uv_t = 1
	1368	ELSE
[132]	1369	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1370	ibc_uv_t = 0
	1371	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1372	ibc_uv_t = 1
	1373	ELSE
[215]	1374	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1375	TRIM( bc_uv_t ) // '"'
[226]	1376	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1377	ENDIF
	1378	ENDIF
	1379
	1380	!
	1381	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1382	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1383	IF ( momentum_advec == 'ups-scheme' ) THEN
	1384	rayleigh_damping_factor = 0.01
	1385	ELSE
	1386	rayleigh_damping_factor = 0.0
	1387	ENDIF
	1388	ELSE
	1389	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1390	THEN
[215]	1391	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1392	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1393	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1394	ENDIF
	1395	ENDIF
	1396
	1397	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1398	IF ( .NOT. ocean ) THEN
	1399	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1400	ELSE
	1401	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1402	ENDIF
[1]	1403	ELSE
[108]	1404	IF ( .NOT. ocean ) THEN
	1405	IF ( rayleigh_damping_height < 0.0 .OR. &
	1406	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1407	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1408	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1409	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1410	ENDIF
[108]	1411	ELSE
	1412	IF ( rayleigh_damping_height > 0.0 .OR. &
	1413	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1414	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1415	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1416	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1417	ENDIF
[1]	1418	ENDIF
	1419	ENDIF
	1420
	1421	!
	1422	!-- Check limiters for Upstream-Spline scheme
	1423	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1424	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1425	overshoot_limit_e < 0.0 ) THEN
[215]	1426	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1427	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1428	ENDIF
	1429	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1430	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1431	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1432	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1433	ENDIF
	1434
	1435	!
	1436	!-- Check number of chosen statistic regions. More than 10 regions are not
	1437	!-- allowed, because so far no more than 10 corresponding output files can
	1438	!-- be opened (cf. check_open)
	1439	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1440	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1441	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1442	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1443	ENDIF
	1444	IF ( normalizing_region > statistic_regions .OR. &
	1445	normalizing_region < 0) THEN
[215]	1446	WRITE ( message_string, * ) 'normalizing_region = ', &
	1447	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1448	' (value of statistic_regions)'
[226]	1449	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1450	ENDIF
	1451
	1452	!
[116]	1453	!-- Check the interval for sorting particles.
	1454	!-- Using particles as cloud droplets requires sorting after each timestep.
	1455	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1456	dt_sort_particles = 0.0
[215]	1457	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1458	'_droplets = .TRUE.'
[226]	1459	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1460	ENDIF
	1461
	1462	!
[1]	1463	!-- Set the default intervals for data output, if necessary
	1464	!-- NOTE: dt_dosp has already been set in package_parin
	1465	IF ( dt_data_output /= 9999999.9 ) THEN
	1466	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1467	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1468	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1469	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1470	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1471	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1472	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1473	ENDIF
	1474
	1475	!
	1476	!-- Set the default skip time intervals for data output, if necessary
	1477	IF ( skip_time_dopr == 9999999.9 ) &
	1478	skip_time_dopr = skip_time_data_output
	1479	IF ( skip_time_dosp == 9999999.9 ) &
	1480	skip_time_dosp = skip_time_data_output
	1481	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1482	skip_time_do2d_xy = skip_time_data_output
	1483	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1484	skip_time_do2d_xz = skip_time_data_output
	1485	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1486	skip_time_do2d_yz = skip_time_data_output
	1487	IF ( skip_time_do3d == 9999999.9 ) &
	1488	skip_time_do3d = skip_time_data_output
	1489	IF ( skip_time_data_output_av == 9999999.9 ) &
	1490	skip_time_data_output_av = skip_time_data_output
	1491
	1492	!
	1493	!-- Check the average intervals (first for 3d-data, then for profiles and
	1494	!-- spectra)
	1495	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1496	WRITE( message_string, * ) 'averaging_interval = ', &
	1497	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1498	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1499	ENDIF
	1500
	1501	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1502	averaging_interval_pr = averaging_interval
	1503	ENDIF
	1504
	1505	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1506	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1507	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1508	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1509	ENDIF
	1510
	1511	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1512	averaging_interval_sp = averaging_interval
	1513	ENDIF
	1514
	1515	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1516	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1517	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1518	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1519	ENDIF
	1520
	1521	!
	1522	!-- Set the default interval for profiles entering the temporal average
	1523	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1524	dt_averaging_input_pr = dt_averaging_input
	1525	ENDIF
	1526
	1527	!
	1528	!-- Set the default interval for the output of timeseries to a reasonable
	1529	!-- value (tries to minimize the number of calls of flow_statistics)
	1530	IF ( dt_dots == 9999999.9 ) THEN
	1531	IF ( averaging_interval_pr == 0.0 ) THEN
	1532	dt_dots = MIN( dt_run_control, dt_dopr )
	1533	ELSE
	1534	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1535	ENDIF
	1536	ENDIF
	1537
	1538	!
	1539	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1540	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1541	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1542	dt_averaging_input, ' must be <= averaging_interval = ', &
	1543	averaging_interval
[226]	1544	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1545	ENDIF
	1546
	1547	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1548	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1549	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1550	averaging_interval_pr
[226]	1551	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1552	ENDIF
	1553
	1554	!
[72]	1555	!-- Set the default value for the integration interval of precipitation amount
	1556	IF ( precipitation ) THEN
	1557	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1558	precipitation_amount_interval = dt_do2d_xy
	1559	ELSE
	1560	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1561	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1562	precipitation_amount_interval, ' must not be larger than ', &
	1563	'dt_do2d_xy = ', dt_do2d_xy
[226]	1564	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1565	ENDIF
	1566	ENDIF
	1567	ENDIF
	1568
	1569	!
[1]	1570	!-- Determine the number of output profiles and check whether they are
	1571	!-- permissible
	1572	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1573
	1574	dopr_n = dopr_n + 1
	1575	i = dopr_n
	1576
	1577	!
	1578	!-- Determine internal profile number (for hom, homs)
	1579	!-- and store height levels
	1580	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1581
	1582	CASE ( 'u', '#u' )
	1583	dopr_index(i) = 1
[87]	1584	dopr_unit(i) = 'm/s'
[1]	1585	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1586	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1587	dopr_initial_index(i) = 5
	1588	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1589	data_output_pr(i) = data_output_pr(i)(2:)
	1590	ENDIF
	1591
	1592	CASE ( 'v', '#v' )
	1593	dopr_index(i) = 2
[87]	1594	dopr_unit(i) = 'm/s'
	1595	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1596	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1597	dopr_initial_index(i) = 6
	1598	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1599	data_output_pr(i) = data_output_pr(i)(2:)
	1600	ENDIF
	1601
	1602	CASE ( 'w' )
	1603	dopr_index(i) = 3
[87]	1604	dopr_unit(i) = 'm/s'
	1605	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1606
	1607	CASE ( 'pt', '#pt' )
	1608	IF ( .NOT. cloud_physics ) THEN
	1609	dopr_index(i) = 4
[87]	1610	dopr_unit(i) = 'K'
[1]	1611	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1612	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1613	dopr_initial_index(i) = 7
	1614	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1615	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1616	data_output_pr(i) = data_output_pr(i)(2:)
	1617	ENDIF
	1618	ELSE
	1619	dopr_index(i) = 43
[87]	1620	dopr_unit(i) = 'K'
[1]	1621	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1622	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1623	dopr_initial_index(i) = 28
	1624	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1625	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1626	data_output_pr(i) = data_output_pr(i)(2:)
	1627	ENDIF
	1628	ENDIF
	1629
	1630	CASE ( 'e' )
	1631	dopr_index(i) = 8
[87]	1632	dopr_unit(i) = 'm2/s2'
[1]	1633	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1634	hom(nzb,2,8,:) = 0.0
	1635
	1636	CASE ( 'km', '#km' )
	1637	dopr_index(i) = 9
[87]	1638	dopr_unit(i) = 'm2/s'
[1]	1639	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1640	hom(nzb,2,9,:) = 0.0
	1641	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1642	dopr_initial_index(i) = 23
	1643	hom(:,2,23,:) = hom(:,2,9,:)
	1644	data_output_pr(i) = data_output_pr(i)(2:)
	1645	ENDIF
	1646
	1647	CASE ( 'kh', '#kh' )
	1648	dopr_index(i) = 10
[87]	1649	dopr_unit(i) = 'm2/s'
[1]	1650	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1651	hom(nzb,2,10,:) = 0.0
	1652	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1653	dopr_initial_index(i) = 24
	1654	hom(:,2,24,:) = hom(:,2,10,:)
	1655	data_output_pr(i) = data_output_pr(i)(2:)
	1656	ENDIF
	1657
	1658	CASE ( 'l', '#l' )
	1659	dopr_index(i) = 11
[87]	1660	dopr_unit(i) = 'm'
[1]	1661	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1662	hom(nzb,2,11,:) = 0.0
	1663	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1664	dopr_initial_index(i) = 25
	1665	hom(:,2,25,:) = hom(:,2,11,:)
	1666	data_output_pr(i) = data_output_pr(i)(2:)
	1667	ENDIF
	1668
	1669	CASE ( 'w"u"' )
	1670	dopr_index(i) = 12
[87]	1671	dopr_unit(i) = 'm2/s2'
[1]	1672	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1673	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1674
	1675	CASE ( 'wu' )
	1676	dopr_index(i) = 13
[87]	1677	dopr_unit(i) = 'm2/s2'
[1]	1678	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1679
	1680	CASE ( 'w"v"' )
	1681	dopr_index(i) = 14
[87]	1682	dopr_unit(i) = 'm2/s2'
[1]	1683	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1684	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1685
	1686	CASE ( 'wv' )
	1687	dopr_index(i) = 15
[87]	1688	dopr_unit(i) = 'm2/s2'
[1]	1689	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1690
	1691	CASE ( 'w"pt"' )
	1692	dopr_index(i) = 16
[87]	1693	dopr_unit(i) = 'K m/s'
[1]	1694	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1695
	1696	CASE ( 'wpt' )
	1697	dopr_index(i) = 17
[87]	1698	dopr_unit(i) = 'K m/s'
[1]	1699	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1700
	1701	CASE ( 'wpt' )
	1702	dopr_index(i) = 18
[87]	1703	dopr_unit(i) = 'K m/s'
[1]	1704	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1705
	1706	CASE ( 'wu' )
	1707	dopr_index(i) = 19
[87]	1708	dopr_unit(i) = 'm2/s2'
[1]	1709	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1710	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1711
	1712	CASE ( 'wv' )
	1713	dopr_index(i) = 20
[87]	1714	dopr_unit(i) = 'm2/s2'
[1]	1715	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1716	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1717
	1718	CASE ( 'wptBC' )
	1719	dopr_index(i) = 21
[87]	1720	dopr_unit(i) = 'K m/s'
[1]	1721	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1722
	1723	CASE ( 'wptBC' )
	1724	dopr_index(i) = 22
[87]	1725	dopr_unit(i) = 'K m/s'
[1]	1726	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1727
[96]	1728	CASE ( 'sa', '#sa' )
	1729	IF ( .NOT. ocean ) THEN
[215]	1730	message_string = 'data_output_pr = ' // &
	1731	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1732	'lemented for ocean = .FALSE.'
[226]	1733	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1734	ELSE
	1735	dopr_index(i) = 23
	1736	dopr_unit(i) = 'psu'
	1737	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1738	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1739	dopr_initial_index(i) = 26
	1740	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1741	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1742	data_output_pr(i) = data_output_pr(i)(2:)
	1743	ENDIF
	1744	ENDIF
	1745
[1]	1746	CASE ( 'u*2' )
	1747	dopr_index(i) = 30
[87]	1748	dopr_unit(i) = 'm2/s2'
[1]	1749	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1750
	1751	CASE ( 'v*2' )
	1752	dopr_index(i) = 31
[87]	1753	dopr_unit(i) = 'm2/s2'
[1]	1754	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1755
	1756	CASE ( 'w*2' )
	1757	dopr_index(i) = 32
[87]	1758	dopr_unit(i) = 'm2/s2'
[1]	1759	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1760
	1761	CASE ( 'pt*2' )
	1762	dopr_index(i) = 33
[87]	1763	dopr_unit(i) = 'K2'
[1]	1764	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1765
	1766	CASE ( 'e*' )
	1767	dopr_index(i) = 34
[87]	1768	dopr_unit(i) = 'm2/s2'
[1]	1769	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1770
	1771	CASE ( 'w2pt' )
	1772	dopr_index(i) = 35
[87]	1773	dopr_unit(i) = 'K m2/s2'
[1]	1774	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1775
	1776	CASE ( 'wpt2' )
	1777	dopr_index(i) = 36
[87]	1778	dopr_unit(i) = 'K2 m/s'
[1]	1779	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1780
	1781	CASE ( 'we' )
	1782	dopr_index(i) = 37
[87]	1783	dopr_unit(i) = 'm3/s3'
[1]	1784	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1785
	1786	CASE ( 'w*3' )
	1787	dopr_index(i) = 38
[87]	1788	dopr_unit(i) = 'm3/s3'
[1]	1789	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1790
	1791	CASE ( 'Sw' )
	1792	dopr_index(i) = 39
[89]	1793	dopr_unit(i) = 'none'
[1]	1794	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1795
[232]	1796	CASE ( 'p' )
	1797	dopr_index(i) = 40
	1798	dopr_unit(i) = 'Pa'
	1799	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1800
[1]	1801	CASE ( 'q', '#q' )
[108]	1802	IF ( .NOT. humidity ) THEN
[215]	1803	message_string = 'data_output_pr = ' // &
	1804	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1805	'lemented for humidity = .FALSE.'
[226]	1806	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1807	ELSE
	1808	dopr_index(i) = 41
[87]	1809	dopr_unit(i) = 'kg/kg'
	1810	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1811	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1812	dopr_initial_index(i) = 26
	1813	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1814	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1815	data_output_pr(i) = data_output_pr(i)(2:)
	1816	ENDIF
	1817	ENDIF
	1818
	1819	CASE ( 's', '#s' )
	1820	IF ( .NOT. passive_scalar ) THEN
[215]	1821	message_string = 'data_output_pr = ' // &
	1822	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1823	'lemented for passive_scalar = .FALSE.'
[226]	1824	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1825	ELSE
	1826	dopr_index(i) = 41
[87]	1827	dopr_unit(i) = 'kg/m3'
	1828	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1829	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1830	dopr_initial_index(i) = 26
	1831	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1832	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1833	data_output_pr(i) = data_output_pr(i)(2:)
	1834	ENDIF
	1835	ENDIF
	1836
	1837	CASE ( 'qv', '#qv' )
	1838	IF ( .NOT. cloud_physics ) THEN
	1839	dopr_index(i) = 41
[87]	1840	dopr_unit(i) = 'kg/kg'
	1841	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1842	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1843	dopr_initial_index(i) = 26
	1844	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1845	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1846	data_output_pr(i) = data_output_pr(i)(2:)
	1847	ENDIF
	1848	ELSE
	1849	dopr_index(i) = 42
[87]	1850	dopr_unit(i) = 'kg/kg'
	1851	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1852	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1853	dopr_initial_index(i) = 27
	1854	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1855	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1856	data_output_pr(i) = data_output_pr(i)(2:)
	1857	ENDIF
	1858	ENDIF
	1859
	1860	CASE ( 'lpt', '#lpt' )
	1861	IF ( .NOT. cloud_physics ) THEN
[215]	1862	message_string = 'data_output_pr = ' // &
	1863	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1864	'lemented for cloud_physics = .FALSE.'
[226]	1865	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	1866	ELSE
	1867	dopr_index(i) = 4
[87]	1868	dopr_unit(i) = 'K'
[1]	1869	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1870	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1871	dopr_initial_index(i) = 7
	1872	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1873	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1874	data_output_pr(i) = data_output_pr(i)(2:)
	1875	ENDIF
	1876	ENDIF
	1877
	1878	CASE ( 'vpt', '#vpt' )
	1879	dopr_index(i) = 44
[87]	1880	dopr_unit(i) = 'K'
	1881	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1882	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1883	dopr_initial_index(i) = 29
	1884	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1885	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1886	data_output_pr(i) = data_output_pr(i)(2:)
	1887	ENDIF
	1888
	1889	CASE ( 'w"vpt"' )
	1890	dopr_index(i) = 45
[87]	1891	dopr_unit(i) = 'K m/s'
[1]	1892	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1893
	1894	CASE ( 'wvpt' )
	1895	dopr_index(i) = 46
[87]	1896	dopr_unit(i) = 'K m/s'
[1]	1897	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1898
	1899	CASE ( 'wvpt' )
	1900	dopr_index(i) = 47
[87]	1901	dopr_unit(i) = 'K m/s'
[1]	1902	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1903
	1904	CASE ( 'w"q"' )
[108]	1905	IF ( .NOT. humidity ) THEN
[215]	1906	message_string = 'data_output_pr = ' // &
	1907	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1908	'lemented for humidity = .FALSE.'
[226]	1909	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1910	ELSE
	1911	dopr_index(i) = 48
[87]	1912	dopr_unit(i) = 'kg/kg m/s'
[1]	1913	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1914	ENDIF
	1915
	1916	CASE ( 'wq' )
[108]	1917	IF ( .NOT. humidity ) THEN
[215]	1918	message_string = 'data_output_pr = ' // &
	1919	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1920	'lemented for humidity = .FALSE.'
[226]	1921	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1922	ELSE
	1923	dopr_index(i) = 49
[87]	1924	dopr_unit(i) = 'kg/kg m/s'
[1]	1925	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1926	ENDIF
	1927
	1928	CASE ( 'wq' )
[108]	1929	IF ( .NOT. humidity ) THEN
[215]	1930	message_string = 'data_output_pr = ' // &
	1931	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1932	'lemented for humidity = .FALSE.'
[226]	1933	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1934	ELSE
	1935	dopr_index(i) = 50
[87]	1936	dopr_unit(i) = 'kg/kg m/s'
[1]	1937	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1938	ENDIF
	1939
	1940	CASE ( 'w"s"' )
	1941	IF ( .NOT. passive_scalar ) THEN
[215]	1942	message_string = 'data_output_pr = ' // &
	1943	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1944	'lemented for passive_scalar = .FALSE.'
[226]	1945	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1946	ELSE
	1947	dopr_index(i) = 48
[87]	1948	dopr_unit(i) = 'kg/m3 m/s'
[1]	1949	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1950	ENDIF
	1951
	1952	CASE ( 'ws' )
	1953	IF ( .NOT. passive_scalar ) THEN
[215]	1954	message_string = 'data_output_pr = ' // &
	1955	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1956	'lemented for passive_scalar = .FALSE.'
[226]	1957	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1958	ELSE
	1959	dopr_index(i) = 49
[87]	1960	dopr_unit(i) = 'kg/m3 m/s'
[1]	1961	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1962	ENDIF
	1963
	1964	CASE ( 'ws' )
	1965	IF ( .NOT. passive_scalar ) THEN
[215]	1966	message_string = 'data_output_pr = ' // &
	1967	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1968	'lemented for passive_scalar = .FALSE.'
[226]	1969	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1970	ELSE
	1971	dopr_index(i) = 50
[87]	1972	dopr_unit(i) = 'kg/m3 m/s'
[1]	1973	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1974	ENDIF
	1975
	1976	CASE ( 'w"qv"' )
[75]	1977	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1978	THEN
	1979	dopr_index(i) = 48
[87]	1980	dopr_unit(i) = 'kg/kg m/s'
[1]	1981	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1982	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1983	dopr_index(i) = 51
[87]	1984	dopr_unit(i) = 'kg/kg m/s'
[1]	1985	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	1986	ELSE
[215]	1987	message_string = 'data_output_pr = ' // &
	1988	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1989	'lemented for cloud_physics = .FALSE. an&' // &
	1990	'd humidity = .FALSE.'
[226]	1991	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1992	ENDIF
	1993
	1994	CASE ( 'wqv' )
[75]	1995	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1996	THEN
	1997	dopr_index(i) = 49
[87]	1998	dopr_unit(i) = 'kg/kg m/s'
[1]	1999	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2000	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2001	dopr_index(i) = 52
[87]	2002	dopr_unit(i) = 'kg/kg m/s'
[1]	2003	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2004	ELSE
[215]	2005	message_string = 'data_output_pr = ' // &
	2006	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2007	'lemented for cloud_physics = .FALSE. an&' // &
	2008	'd humidity = .FALSE.'
[226]	2009	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2010	ENDIF
	2011
	2012	CASE ( 'wqv' )
[75]	2013	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2014	THEN
	2015	dopr_index(i) = 50
[87]	2016	dopr_unit(i) = 'kg/kg m/s'
[1]	2017	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2018	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2019	dopr_index(i) = 53
[87]	2020	dopr_unit(i) = 'kg/kg m/s'
[1]	2021	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2022	ELSE
[215]	2023	message_string = 'data_output_pr = ' // &
	2024	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2025	'lemented for cloud_physics = .FALSE. an&' // &
	2026	'd humidity = .FALSE.'
[226]	2027	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2028	ENDIF
	2029
	2030	CASE ( 'ql' )
	2031	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2032	message_string = 'data_output_pr = ' // &
	2033	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2034	'lemented for cloud_physics = .FALSE. or' // &
	2035	'&cloud_droplets = .FALSE.'
[226]	2036	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2037	ELSE
	2038	dopr_index(i) = 54
[87]	2039	dopr_unit(i) = 'kg/kg'
[1]	2040	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2041	ENDIF
	2042
	2043	CASE ( 'wuu*/dz' )
	2044	dopr_index(i) = 55
[87]	2045	dopr_unit(i) = 'm2/s3'
[1]	2046	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2047
	2048	CASE ( 'wp/dz' )
	2049	dopr_index(i) = 56
[87]	2050	dopr_unit(i) = 'm2/s3'
[106]	2051	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2052
	2053	CASE ( 'w"e/dz' )
	2054	dopr_index(i) = 57
[87]	2055	dopr_unit(i) = 'm2/s3'
[1]	2056	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2057
	2058	CASE ( 'u"pt"' )
	2059	dopr_index(i) = 58
[87]	2060	dopr_unit(i) = 'K m/s'
[1]	2061	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2062
	2063	CASE ( 'upt' )
	2064	dopr_index(i) = 59
[87]	2065	dopr_unit(i) = 'K m/s'
[1]	2066	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2067
	2068	CASE ( 'upt_t' )
	2069	dopr_index(i) = 60
[87]	2070	dopr_unit(i) = 'K m/s'
[1]	2071	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2072
	2073	CASE ( 'v"pt"' )
	2074	dopr_index(i) = 61
[87]	2075	dopr_unit(i) = 'K m/s'
[1]	2076	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2077
	2078	CASE ( 'vpt' )
	2079	dopr_index(i) = 62
[87]	2080	dopr_unit(i) = 'K m/s'
[1]	2081	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2082
	2083	CASE ( 'vpt_t' )
	2084	dopr_index(i) = 63
[87]	2085	dopr_unit(i) = 'K m/s'
[1]	2086	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2087
[96]	2088	CASE ( 'rho' )
	2089	dopr_index(i) = 64
	2090	dopr_unit(i) = 'kg/m3'
	2091	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2092
[96]	2093	CASE ( 'w"sa"' )
	2094	IF ( .NOT. ocean ) THEN
[215]	2095	message_string = 'data_output_pr = ' // &
	2096	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2097	'lemented for ocean = .FALSE.'
[226]	2098	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2099	ELSE
	2100	dopr_index(i) = 65
	2101	dopr_unit(i) = 'psu m/s'
	2102	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2103	ENDIF
	2104
	2105	CASE ( 'wsa' )
	2106	IF ( .NOT. ocean ) THEN
[215]	2107	message_string = 'data_output_pr = ' // &
	2108	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2109	'lemented for ocean = .FALSE.'
[226]	2110	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2111	ELSE
	2112	dopr_index(i) = 66
	2113	dopr_unit(i) = 'psu m/s'
	2114	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2115	ENDIF
	2116
	2117	CASE ( 'wsa' )
	2118	IF ( .NOT. ocean ) THEN
[215]	2119	message_string = 'data_output_pr = ' // &
	2120	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2121	'lemented for ocean = .FALSE.'
[226]	2122	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2123	ELSE
	2124	dopr_index(i) = 67
	2125	dopr_unit(i) = 'psu m/s'
	2126	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2127	ENDIF
	2128
[106]	2129	CASE ( 'wp' )
	2130	dopr_index(i) = 68
	2131	dopr_unit(i) = 'm3/s3'
	2132	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2133
[106]	2134	CASE ( 'w"e' )
	2135	dopr_index(i) = 69
	2136	dopr_unit(i) = 'm3/s3'
	2137	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2138
[197]	2139	CASE ( 'q*2' )
	2140	IF ( .NOT. humidity ) THEN
[215]	2141	message_string = 'data_output_pr = ' // &
	2142	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2143	'lemented for humidity = .FALSE.'
[226]	2144	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2145	ELSE
	2146	dopr_index(i) = 70
	2147	dopr_unit(i) = 'kg2/kg2'
	2148	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2149	ENDIF
[106]	2150
[1]	2151	CASE DEFAULT
[87]	2152
	2153	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2154
	2155	IF ( unit == 'illegal' ) THEN
[215]	2156	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2157	message_string = 'illegal value for data_output_pr or ' // &
	2158	'data_output_pr_user = "' // &
	2159	TRIM( data_output_pr(i) ) // '"'
[226]	2160	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2161	ELSE
	2162	message_string = 'illegal value for data_output_pr = "' // &
	2163	TRIM( data_output_pr(i) ) // '"'
[226]	2164	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2165	ENDIF
[1]	2166	ENDIF
	2167
	2168	END SELECT
	2169	!
	2170	!-- Check to which of the predefined coordinate systems the profile belongs
	2171	DO k = 1, crmax
	2172	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2173	/=0 ) &
	2174	THEN
	2175	dopr_crossindex(i) = k
	2176	EXIT
	2177	ENDIF
	2178	ENDDO
	2179	!
	2180	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2181	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2182	!-- control characters
	2183	dopr_label(i) = data_output_pr(i)
	2184	position = INDEX( dopr_label(i) , '"' )
	2185	DO WHILE ( position /= 0 )
	2186	dopr_label(i)(position:position) = ''''
	2187	position = INDEX( dopr_label(i) , '"' )
	2188	ENDDO
	2189
	2190	ENDDO
	2191
	2192	!
	2193	!-- y-value range of the coordinate system (PROFIL).
	2194	!-- x-value range determined in plot_1d.
[94]	2195	IF ( .NOT. ocean ) THEN
	2196	cross_uymin = 0.0
	2197	IF ( z_max_do1d == -1.0 ) THEN
	2198	cross_uymax = zu(nzt+1)
	2199	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2200	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2201	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2202	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2203	ELSE
	2204	cross_uymax = z_max_do1d
	2205	ENDIF
[1]	2206	ENDIF
	2207
	2208	!
	2209	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2210	!-- permissible
	2211	DO i = 1, crmax
	2212	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2213
	2214	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2215	j = 0
	2216
	2217	CASE DEFAULT
[215]	2218	message_string = 'unknown normalization method cross_normali' // &
	2219	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2220	'"'
[226]	2221	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2222
	2223	END SELECT
	2224	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2225
	2226	CASE ( '', 'z_i' )
	2227	j = 0
	2228
	2229	CASE DEFAULT
[215]	2230	message_string = 'unknown normalization method cross_normali' // &
	2231	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2232	'"'
[226]	2233	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2234
	2235	END SELECT
	2236	ENDDO
	2237	!
	2238	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2239	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2240	THEN
[215]	2241	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2242	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2243	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2244	ENDIF
	2245
	2246
	2247	!
	2248	!-- Append user-defined data output variables to the standard data output
	2249	IF ( data_output_user(1) /= ' ' ) THEN
	2250	i = 1
	2251	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2252	i = i + 1
	2253	ENDDO
	2254	j = 1
	2255	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2256	IF ( i > 100 ) THEN
[215]	2257	message_string = 'number of output quantitities given by data' // &
	2258	'_output and data_output_user exceeds the limit of 100'
[226]	2259	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2260	ENDIF
	2261	data_output(i) = data_output_user(j)
	2262	i = i + 1
	2263	j = j + 1
	2264	ENDDO
	2265	ENDIF
	2266
	2267	!
	2268	!-- Check and set steering parameters for 2d/3d data output and averaging
	2269	i = 1
	2270	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2271	!
	2272	!-- Check for data averaging
	2273	ilen = LEN_TRIM( data_output(i) )
	2274	j = 0 ! no data averaging
	2275	IF ( ilen > 3 ) THEN
	2276	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2277	j = 1 ! data averaging
	2278	data_output(i) = data_output(i)(1:ilen-3)
	2279	ENDIF
	2280	ENDIF
	2281	!
	2282	!-- Check for cross section or volume data
	2283	ilen = LEN_TRIM( data_output(i) )
	2284	k = 0 ! 3d data
	2285	var = data_output(i)(1:ilen)
	2286	IF ( ilen > 3 ) THEN
	2287	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2288	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2289	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2290	k = 1 ! 2d data
	2291	var = data_output(i)(1:ilen-3)
	2292	ENDIF
	2293	ENDIF
	2294	!
	2295	!-- Check for allowed value and set units
	2296	SELECT CASE ( TRIM( var ) )
	2297
	2298	CASE ( 'e' )
	2299	IF ( constant_diffusion ) THEN
[215]	2300	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2301	'res constant_diffusion = .FALSE.'
[226]	2302	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2303	ENDIF
	2304	unit = 'm2/s2'
	2305
	2306	CASE ( 'pc', 'pr' )
	2307	IF ( .NOT. particle_advection ) THEN
[215]	2308	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2309	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2310	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2311	ENDIF
	2312	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2313	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2314
	2315	CASE ( 'q', 'vpt' )
[75]	2316	IF ( .NOT. humidity ) THEN
[215]	2317	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2318	'res humidity = .TRUE.'
[226]	2319	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2320	ENDIF
	2321	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2322	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2323
	2324	CASE ( 'ql' )
	2325	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2326	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2327	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2328	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2329	ENDIF
	2330	unit = 'kg/kg'
	2331
	2332	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2333	IF ( .NOT. cloud_droplets ) THEN
[215]	2334	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2335	'res cloud_droplets = .TRUE.'
[226]	2336	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2337	ENDIF
	2338	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2339	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2340	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2341
	2342	CASE ( 'qv' )
	2343	IF ( .NOT. cloud_physics ) THEN
[215]	2344	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2345	'res cloud_physics = .TRUE.'
[226]	2346	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2347	ENDIF
	2348	unit = 'kg/kg'
	2349
[96]	2350	CASE ( 'rho' )
	2351	IF ( .NOT. ocean ) THEN
[215]	2352	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2353	'res ocean = .TRUE.'
[226]	2354	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2355	ENDIF
	2356	unit = 'kg/m3'
	2357
[1]	2358	CASE ( 's' )
	2359	IF ( .NOT. passive_scalar ) THEN
[215]	2360	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2361	'res passive_scalar = .TRUE.'
[226]	2362	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2363	ENDIF
	2364	unit = 'conc'
	2365
[96]	2366	CASE ( 'sa' )
	2367	IF ( .NOT. ocean ) THEN
[215]	2368	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2369	'res ocean = .TRUE.'
[226]	2370	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2371	ENDIF
	2372	unit = 'psu'
	2373
[354]	2374	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
[1]	2375	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2376	message_string = 'illegal value for data_output: "' // &
	2377	TRIM( var ) // '" & only 2d-horizontal ' // &
	2378	'cross sections are allowed for this value'
[226]	2379	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2380	ENDIF
	2381	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2382	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2383	'res cloud_physics = .TRUE.'
[226]	2384	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2385	ENDIF
[72]	2386	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2387	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2388	'res precipitation = .TRUE.'
[226]	2389	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2390	ENDIF
	2391	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2392	message_string = 'temporal averaging of precipitation ' // &
	2393	'amount "' // TRIM( var ) // '" is not possible'
[226]	2394	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2395	ENDIF
	2396	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2397	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2398	'res precipitation = .TRUE.'
[226]	2399	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2400	ENDIF
[354]	2401	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2402	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2403	'res humidity = .TRUE.'
	2404	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2405	ENDIF
[72]	2406
[354]	2407	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2408	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2409	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2410	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2411	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2412	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2413	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2414	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[72]	2415
[1]	2416
	2417	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2418	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2419	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2420	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2421	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2422	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2423	CONTINUE
	2424
	2425	CASE DEFAULT
	2426	CALL user_check_data_output( var, unit )
	2427
	2428	IF ( unit == 'illegal' ) THEN
[215]	2429	IF ( data_output_user(1) /= ' ' ) THEN
	2430	message_string = 'illegal value for data_output or ' // &
	2431	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2432	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2433	ELSE
	2434	message_string = 'illegal value for data_output =' // &
	2435	TRIM( data_output(i) ) // '"'
[226]	2436	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2437	ENDIF
	2438	ENDIF
	2439
	2440	END SELECT
	2441	!
	2442	!-- Set the internal steering parameters appropriately
	2443	IF ( k == 0 ) THEN
	2444	do3d_no(j) = do3d_no(j) + 1
	2445	do3d(j,do3d_no(j)) = data_output(i)
	2446	do3d_unit(j,do3d_no(j)) = unit
	2447	ELSE
	2448	do2d_no(j) = do2d_no(j) + 1
	2449	do2d(j,do2d_no(j)) = data_output(i)
	2450	do2d_unit(j,do2d_no(j)) = unit
	2451	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2452	data_output_xy(j) = .TRUE.
	2453	ENDIF
	2454	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2455	data_output_xz(j) = .TRUE.
	2456	ENDIF
	2457	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2458	data_output_yz(j) = .TRUE.
	2459	ENDIF
	2460	ENDIF
	2461
	2462	IF ( j == 1 ) THEN
	2463	!
	2464	!-- Check, if variable is already subject to averaging
	2465	found = .FALSE.
	2466	DO k = 1, doav_n
	2467	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2468	ENDDO
	2469
	2470	IF ( .NOT. found ) THEN
	2471	doav_n = doav_n + 1
	2472	doav(doav_n) = var
	2473	ENDIF
	2474	ENDIF
	2475
	2476	i = i + 1
	2477	ENDDO
	2478
	2479	!
[308]	2480	!-- Check sectional planes and store them in one shared array
	2481	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2482	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2483	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2484	ENDIF
	2485	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2486	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2487	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2488	ENDIF
	2489	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2490	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2491	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2492	ENDIF
[1]	2493	section(:,1) = section_xy
	2494	section(:,2) = section_xz
	2495	section(:,3) = section_yz
	2496
	2497	!
	2498	!-- Upper plot limit (grid point value) for 1D profiles
	2499	IF ( z_max_do1d == -1.0 ) THEN
	2500	nz_do1d = nzt+1
	2501	ELSE
	2502	DO k = nzb+1, nzt+1
	2503	nz_do1d = k
	2504	IF ( zw(k) > z_max_do1d ) EXIT
	2505	ENDDO
	2506	ENDIF
	2507
	2508	!
	2509	!-- Upper plot limit for 2D vertical sections
	2510	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2511	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2512	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2513	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2514	' (zu(nzt))'
[226]	2515	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2516	ENDIF
	2517
	2518	!
	2519	!-- Upper plot limit for 3D arrays
	2520	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2521
	2522	!
	2523	!-- Determine and check accuracy for compressed 3D plot output
	2524	IF ( do3d_compress ) THEN
	2525	!
	2526	!-- Compression only permissible on T3E machines
	2527	IF ( host(1:3) /= 't3e' ) THEN
[215]	2528	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2529	TRIM( host ) // '"'
[226]	2530	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2531	ENDIF
	2532
	2533	i = 1
	2534	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2535
	2536	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2537	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2538	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2539	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2540	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2541	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2542	ENDIF
	2543
	2544	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2545	var = do3d_comp_prec(i)(1:ilen-1)
	2546
	2547	SELECT CASE ( var )
	2548
	2549	CASE ( 'u' )
	2550	j = 1
	2551	CASE ( 'v' )
	2552	j = 2
	2553	CASE ( 'w' )
	2554	j = 3
	2555	CASE ( 'p' )
	2556	j = 4
	2557	CASE ( 'pt' )
	2558	j = 5
	2559
	2560	CASE DEFAULT
[215]	2561	WRITE( message_string, * ) 'unknown variable "', &
	2562	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2563	i, ')'
[226]	2564	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2565
	2566	END SELECT
	2567
	2568	plot_3d_precision(j)%precision = prec
	2569	i = i + 1
	2570
	2571	ENDDO
	2572	ENDIF
	2573
	2574	!
	2575	!-- Check the data output format(s)
	2576	IF ( data_output_format(1) == ' ' ) THEN
	2577	!
	2578	!-- Default value
	2579	netcdf_output = .TRUE.
	2580	ELSE
	2581	i = 1
	2582	DO WHILE ( data_output_format(i) /= ' ' )
	2583
	2584	SELECT CASE ( data_output_format(i) )
	2585
	2586	CASE ( 'netcdf' )
	2587	netcdf_output = .TRUE.
	2588	CASE ( 'iso2d' )
	2589	iso2d_output = .TRUE.
	2590	CASE ( 'profil' )
	2591	profil_output = .TRUE.
	2592	CASE ( 'avs' )
	2593	avs_output = .TRUE.
	2594
	2595	CASE DEFAULT
[215]	2596	message_string = 'unknown value for data_output_format "' // &
	2597	TRIM( data_output_format(i) ) // '"'
[226]	2598	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2599
	2600	END SELECT
	2601
	2602	i = i + 1
	2603	IF ( i > 10 ) EXIT
	2604
	2605	ENDDO
	2606
	2607	ENDIF
	2608
	2609	!
	2610	!-- Check netcdf precison
	2611	ldum = .FALSE.
	2612	CALL define_netcdf_header( 'ch', ldum, 0 )
	2613
	2614	!
	2615	!-- Check, whether a constant diffusion coefficient shall be used
	2616	IF ( km_constant /= -1.0 ) THEN
	2617	IF ( km_constant < 0.0 ) THEN
[215]	2618	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2619	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2620	ELSE
	2621	IF ( prandtl_number < 0.0 ) THEN
[215]	2622	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2623	' < 0.0'
[226]	2624	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2625	ENDIF
	2626	constant_diffusion = .TRUE.
	2627
	2628	IF ( prandtl_layer ) THEN
[215]	2629	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2630	'value of km'
[226]	2631	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2632	ENDIF
	2633	ENDIF
	2634	ENDIF
	2635
	2636	!
	2637	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2638	!-- for the horizontal diffusivity used within the outflow damping layer,
	2639	!-- and check/set the width of the damping layer
	2640	IF ( bc_lr /= 'cyclic' ) THEN
	2641	IF ( km_damp_max == -1.0 ) THEN
	2642	km_damp_max = 0.5 * dx
	2643	ENDIF
	2644	IF ( outflow_damping_width == -1.0 ) THEN
	2645	outflow_damping_width = MIN( 20, nx/2 )
	2646	ENDIF
	2647	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2648	message_string = 'outflow_damping width out of range'
[226]	2649	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2650	ENDIF
	2651	ENDIF
	2652
	2653	IF ( bc_ns /= 'cyclic' ) THEN
	2654	IF ( km_damp_max == -1.0 ) THEN
	2655	km_damp_max = 0.5 * dy
	2656	ENDIF
	2657	IF ( outflow_damping_width == -1.0 ) THEN
	2658	outflow_damping_width = MIN( 20, ny/2 )
	2659	ENDIF
	2660	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2661	message_string = 'outflow_damping width out of range'
[226]	2662	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2663	ENDIF
	2664	ENDIF
	2665
	2666	!
	2667	!-- Check value range for rif
	2668	IF ( rif_min >= rif_max ) THEN
[215]	2669	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2670	'than rif_max = ', rif_max
[226]	2671	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2672	ENDIF
	2673
	2674	!
	2675	!-- Determine upper and lower hight level indices for random perturbations
[97]	2676	IF ( disturbance_level_b == -9999999.9 ) THEN
	2677	IF ( ocean ) THEN
	2678	disturbance_level_b = zu((nzt*2)/3)
	2679	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2680	ELSE
	2681	disturbance_level_b = zu(nzb+3)
	2682	disturbance_level_ind_b = nzb + 3
	2683	ENDIF
[1]	2684	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2685	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2686	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2687	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2688	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2689	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2690	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2691	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2692	ELSE
	2693	DO k = 3, nzt-2
	2694	IF ( disturbance_level_b <= zu(k) ) THEN
	2695	disturbance_level_ind_b = k
	2696	EXIT
	2697	ENDIF
	2698	ENDDO
	2699	ENDIF
	2700
[97]	2701	IF ( disturbance_level_t == -9999999.9 ) THEN
	2702	IF ( ocean ) THEN
	2703	disturbance_level_t = zu(nzt-3)
	2704	disturbance_level_ind_t = nzt - 3
	2705	ELSE
	2706	disturbance_level_t = zu(nzt/3)
	2707	disturbance_level_ind_t = nzt / 3
	2708	ENDIF
[1]	2709	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2710	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2711	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2712	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2713	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2714	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2715	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2716	disturbance_level_b
[226]	2717	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2718	ELSE
	2719	DO k = 3, nzt-2
	2720	IF ( disturbance_level_t <= zu(k) ) THEN
	2721	disturbance_level_ind_t = k
	2722	EXIT
	2723	ENDIF
	2724	ENDDO
	2725	ENDIF
	2726
	2727	!
	2728	!-- Check again whether the levels determined this way are ok.
	2729	!-- Error may occur at automatic determination and too few grid points in
	2730	!-- z-direction.
	2731	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2732	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2733	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2734	disturbance_level_b
[226]	2735	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2736	ENDIF
	2737
	2738	!
	2739	!-- Determine the horizontal index range for random perturbations.
	2740	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2741	!-- near the inflow and the perturbation area is further limited to ...(1)
	2742	!-- after the initial phase of the flow.
	2743	dist_nxl = 0; dist_nxr = nx
	2744	dist_nys = 0; dist_nyn = ny
	2745	IF ( bc_lr /= 'cyclic' ) THEN
	2746	IF ( inflow_disturbance_begin == -1 ) THEN
	2747	inflow_disturbance_begin = MIN( 10, nx/2 )
	2748	ENDIF
	2749	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2750	THEN
[215]	2751	message_string = 'inflow_disturbance_begin out of range'
[226]	2752	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2753	ENDIF
	2754	IF ( inflow_disturbance_end == -1 ) THEN
	2755	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2756	ENDIF
	2757	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2758	THEN
[215]	2759	message_string = 'inflow_disturbance_end out of range'
[226]	2760	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2761	ENDIF
	2762	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2763	IF ( inflow_disturbance_begin == -1 ) THEN
	2764	inflow_disturbance_begin = MIN( 10, ny/2 )
	2765	ENDIF
	2766	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2767	THEN
[215]	2768	message_string = 'inflow_disturbance_begin out of range'
[226]	2769	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2770	ENDIF
	2771	IF ( inflow_disturbance_end == -1 ) THEN
	2772	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2773	ENDIF
	2774	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2775	THEN
[215]	2776	message_string = 'inflow_disturbance_end out of range'
[226]	2777	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2778	ENDIF
	2779	ENDIF
	2780
[73]	2781	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2782	dist_nxr = nx - inflow_disturbance_begin
	2783	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2784	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2785	dist_nxl = inflow_disturbance_begin
	2786	dist_nxr(1) = inflow_disturbance_end
[73]	2787	ENDIF
	2788	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2789	dist_nyn = ny - inflow_disturbance_begin
	2790	dist_nys(1) = ny - inflow_disturbance_end
[73]	2791	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2792	dist_nys = inflow_disturbance_begin
	2793	dist_nyn(1) = inflow_disturbance_end
	2794	ENDIF
	2795
	2796	!
[151]	2797	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2798	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2799	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2800	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2801	'condition at the inflow boundary'
[226]	2802	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2803	ENDIF
	2804
	2805	!
	2806	!-- In case of turbulent inflow calculate the index of the recycling plane
	2807	IF ( turbulent_inflow ) THEN
	2808	IF ( recycling_width == 9999999.9 ) THEN
	2809	!
	2810	!-- Set the default value for the width of the recycling domain
	2811	recycling_width = 0.1 * nx * dx
	2812	ELSE
	2813	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2814	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2815	' ', recycling_width
[226]	2816	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	2817	ENDIF
	2818	ENDIF
	2819	!
	2820	!-- Calculate the index
	2821	recycling_plane = recycling_width / dx
	2822	ENDIF
	2823
	2824	!
[1]	2825	!-- Check random generator
	2826	IF ( random_generator /= 'system-specific' .AND. &
	2827	random_generator /= 'numerical-recipes' ) THEN
[215]	2828	message_string = 'unknown random generator: random_generator = "' // &
	2829	TRIM( random_generator ) // '"'
[226]	2830	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2831	ENDIF
	2832
	2833	!
	2834	!-- Determine damping level index for 1D model
	2835	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2836	IF ( damp_level_1d == -1.0 ) THEN
	2837	damp_level_1d = zu(nzt+1)
	2838	damp_level_ind_1d = nzt + 1
	2839	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2840	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2841	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	2842	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	2843	ELSE
	2844	DO k = 1, nzt+1
	2845	IF ( damp_level_1d <= zu(k) ) THEN
	2846	damp_level_ind_1d = k
	2847	EXIT
	2848	ENDIF
	2849	ENDDO
	2850	ENDIF
	2851	ENDIF
[215]	2852
[1]	2853	!
	2854	!-- Check some other 1d-model parameters
	2855	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2856	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2857	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2858	'" is unknown'
[226]	2859	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2860	ENDIF
	2861	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2862	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2863	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2864	'" is unknown'
[226]	2865	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2866	ENDIF
	2867
	2868	!
	2869	!-- Set time for the next user defined restart (time_restart is the
	2870	!-- internal parameter for steering restart events)
	2871	IF ( restart_time /= 9999999.9 ) THEN
[291]	2872	IF ( restart_time > time_since_reference_point ) THEN
	2873	time_restart = restart_time
	2874	ENDIF
[1]	2875	ELSE
	2876	!
	2877	!-- In case of a restart run, set internal parameter to default (no restart)
	2878	!-- if the NAMELIST-parameter restart_time is omitted
	2879	time_restart = 9999999.9
	2880	ENDIF
	2881
	2882	!
	2883	!-- Set default value of the time needed to terminate a model run
	2884	IF ( termination_time_needed == -1.0 ) THEN
	2885	IF ( host(1:3) == 'ibm' ) THEN
	2886	termination_time_needed = 300.0
	2887	ELSE
	2888	termination_time_needed = 35.0
	2889	ENDIF
	2890	ENDIF
	2891
	2892	!
	2893	!-- Check the time needed to terminate a model run
	2894	IF ( host(1:3) == 't3e' ) THEN
	2895	!
	2896	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2897	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2898	IF ( termination_time_needed <= 30.0 ) THEN
[215]	2899	WRITE( message_string, * ) 'termination_time_needed = ', &
	2900	termination_time_needed, ' must be > 30.0 on host "', &
	2901	TRIM( host ), '"'
[226]	2902	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	2903	ENDIF
	2904	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2905	!
	2906	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2907	!-- because the job time consumed before executing palm (for compiling,
	2908	!-- copying of files, etc.) has to be regarded
	2909	IF ( termination_time_needed < 300.0 ) THEN
[215]	2910	WRITE( message_string, * ) 'termination_time_needed = ', &
	2911	termination_time_needed, ' should be >= 300.0 on host "', &
	2912	TRIM( host ), '"'
[226]	2913	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	2914	ENDIF
	2915	ENDIF
	2916
[217]	2917	!
[240]	2918	!-- Check pressure gradient conditions
	2919	IF ( dp_external .AND. conserve_volume_flow ) THEN
	2920	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
	2921	' are .TRUE. but one of them must be .FALSE.'
	2922	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	2923	ENDIF
	2924	IF ( dp_external ) THEN
	2925	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	2926	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	2927	' of range'
	2928	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	2929	ENDIF
	2930	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
	2931	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
	2932	', i.e. the external pressure gradient & will not be applied'
	2933	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	2934	ENDIF
	2935	ENDIF
	2936	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	2937	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	2938	'.FALSE., i.e. the external pressure gradient & will not be applied'
	2939	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	2940	ENDIF
[241]	2941	IF ( conserve_volume_flow ) THEN
	2942	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
	2943	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	2944	conserve_volume_flow_mode = 'inflow_profile'
	2945	ELSE
	2946	conserve_volume_flow_mode = 'initial_profiles'
	2947	ENDIF
	2948	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	2949	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	2950	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	2951	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	2952	conserve_volume_flow_mode
	2953	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	2954	ENDIF
	2955	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
	2956	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
	2957	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
	2958	'require & conserve_volume_flow_mode = ''inflow_profile'''
	2959	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	2960	ENDIF
	2961	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	2962	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	2963	WRITE( message_string, * ) 'cyclic boundary conditions ', &
	2964	'require & conserve_volume_flow_mode = ''initial_profiles''', &
	2965	' or ''bulk_velocity'''
	2966	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	2967	ENDIF
	2968	ENDIF
	2969	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	2970	( .NOT. conserve_volume_flow .OR. &
	2971	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	2972	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
	2973	'conserve_volume_flow = .T. and & ', &
	2974	'conserve_volume_flow_mode = ''bulk_velocity'''
	2975	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	2976	ENDIF
[240]	2977
	2978	!
[264]	2979	!-- Check particle attributes
	2980	IF ( particle_color /= 'none' ) THEN
	2981	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	2982	particle_color /= 'z' ) THEN
	2983	message_string = 'illegal value for parameter particle_color: ' // &
	2984	TRIM( particle_color)
	2985	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	2986	ELSE
	2987	IF ( color_interval(2) <= color_interval(1) ) THEN
	2988	message_string = 'color_interval(2) <= color_interval(1)'
	2989	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	2990	ENDIF
	2991	ENDIF
	2992	ENDIF
	2993
	2994	IF ( particle_dvrpsize /= 'none' ) THEN
	2995	IF ( particle_dvrpsize /= 'absw' ) THEN
	2996	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	2997	' ' // TRIM( particle_color)
	2998	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	2999	ELSE
	3000	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3001	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3002	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3003	ENDIF
	3004	ENDIF
	3005	ENDIF
	3006
	3007	!
[217]	3008	!-- Check &userpar parameters
	3009	CALL user_check_parameters
[1]	3010
[217]	3011
[1]	3012	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |