Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 272

Last change on this file since 272 was 264, checked in by raasch, 16 years ago
new dvrp features added
Property svn:keywords set to `Id`
File size: 115.6 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[264]	6	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	7	! Bugfix: pressure included for profile output
[240]	8	! Check pressure gradient conditions
[256]	9	! topography_grid_convention moved from user_check_parameters
	10	! 'single_street_canyon'
[226]	11	!
	12	! Former revisions:
	13	! -----------------
	14	! $Id: check_parameters.f90 264 2009-03-21 08:14:44Z raasch $
	15	!
	16	! 222 2009-01-12 16:04:16Z letzel
[217]	17	! +user_check_parameters
[213]	18	! Output of messages replaced by message handling routine.
[206]	19	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	20	! deleted __mpi2 directives
[222]	21	! Check that PALM is called with mrun -K parallel for coupling
[198]	22	!
	23	! 197 2008-09-16 15:29:03Z raasch
[177]	24	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	25	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	26	!
	27	! Strict grid matching along z is not needed for mg-solver.
[153]	28	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	29	! Case of reading data for recycling included in initializing_actions,
[197]	30	! check of turbulent_inflow and calculation of recycling_plane.
	31	! q*2 profile added
[139]	32	!
	33	! 138 2007-11-28 10:03:58Z letzel
[138]	34	! Plant canopy added
[132]	35	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	36	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	37	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	38	!
	39	! 109 2007-08-28 15:26:47Z letzel
[102]	40	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	41	! conditions for temperature and fluxes) in case of coupled runs.
	42	! +profiles for wp and w"e
[104]	43	! Bugfix: Error message concerning output of particle concentration (pc)
	44	! modified
[108]	45	! More checks and more default values for coupled runs
	46	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	47	! cloud_physics = .T.)
	48	! Rayleigh damping for ocean fixed.
[109]	49	! Check and, if necessary, set default value for dt_coupling
[98]	50	!
	51	! 97 2007-06-21 08:23:15Z raasch
[97]	52	! Initial salinity profile is calculated, salinity boundary conditions are
	53	! checked,
[94]	54	! z_max_do1d is checked only in case of ocean = .f.,
[97]	55	! +initial temperature and geostrophic velocity profiles for the ocean version,
	56	! use_pt_reference renamed use_reference
[77]	57	!
[90]	58	! 89 2007-05-25 12:08:31Z raasch
	59	! Check for user-defined profiles
	60	!
[77]	61	! 75 2007-03-22 09:54:05Z raasch
[51]	62	! "by_user" allowed as initializing action, -data_output_ts,
[63]	63	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	64	! and pt_reference are checked, moisture renamed humidity,
[72]	65	! output of precipitation amount/rate and roughnes length + check
[73]	66	! possible negative humidities are avoided in initial profile,
[75]	67	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	68	! revision added to run_description_header
[1]	69	!
[39]	70	! 20 2007-02-26 00:12:32Z raasch
	71	! Temperature and humidity gradients at top are now calculated for nzt+1,
	72	! top_heatflux and respective boundary condition bc_pt_t is checked
	73	!
[3]	74	! RCS Log replace by Id keyword, revision history cleaned up
	75	!
[1]	76	! Revision 1.61 2006/08/04 14:20:25 raasch
	77	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	78	! use_upstream_for_tke, default value for dt_dopts,
	79	! generation of file header moved from routines palm and header to here
	80	!
	81	! Revision 1.1 1997/08/26 06:29:23 raasch
	82	! Initial revision
	83	!
	84	!
	85	! Description:
	86	! ------------
	87	! Check control parameters and deduce further quantities.
	88	!------------------------------------------------------------------------------!
	89
	90	USE arrays_3d
	91	USE constants
	92	USE control_parameters
[264]	93	USE dvrp_variables
[1]	94	USE grid_variables
	95	USE indices
	96	USE model_1d
	97	USE netcdf_control
	98	USE particle_attributes
	99	USE pegrid
	100	USE profil_parameter
	101	USE statistics
	102	USE transpose_indices
	103
	104	IMPLICIT NONE
	105
	106	CHARACTER (LEN=1) :: sq
	107	CHARACTER (LEN=6) :: var
	108	CHARACTER (LEN=7) :: unit
	109	CHARACTER (LEN=8) :: date
	110	CHARACTER (LEN=10) :: time
[102]	111	CHARACTER (LEN=40) :: coupling_string
[1]	112	CHARACTER (LEN=100) :: action
	113
[108]	114	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	115	position, prec
[1]	116	LOGICAL :: found, ldum
[108]	117	REAL :: gradient, maxn, maxp, remote = 0.0
[1]	118
	119	!
	120	!-- Warning, if host is not set
	121	IF ( host(1:1) == ' ' ) THEN
[213]	122	message_string = '"host" is not set. Please check that environment ' // &
	123	'variable "localhost" & is set before running PALM'
[226]	124	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	125	ENDIF
	126
	127	!
[102]	128	!-- Check the coupling mode
	129	IF ( coupling_mode /= 'uncoupled' .AND. &
	130	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	131	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	132	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	133	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	134	ENDIF
	135
	136	!
[108]	137	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	138	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	139
[108]	140	IF ( dt_coupling == 9999999.9 ) THEN
[213]	141	message_string = 'dt_coupling is not set but required for coup' // &
	142	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	143	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	144	ENDIF
[213]	145
[206]	146	#if defined( __parallel )
	147	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	148	ierr )
	149	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	150	status, ierr )
[108]	151	IF ( dt_coupling /= remote ) THEN
[213]	152	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	153	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	154	'dt_coupling_remote = ', remote
[226]	155	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	156	ENDIF
[109]	157	IF ( dt_coupling <= 0.0 ) THEN
[206]	158	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	159	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	160	status, ierr )
[109]	161	dt_coupling = MAX( dt_max, remote )
[213]	162	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	163	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	164	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	165	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	166	ENDIF
[213]	167
[206]	168	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	169	ierr )
	170	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	171	status, ierr )
[108]	172	IF ( restart_time /= remote ) THEN
[213]	173	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	174	'": restart_time = ', restart_time, '& is not equal to ', &
	175	'restart_time_remote = ', remote
[226]	176	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	177	ENDIF
[213]	178
[206]	179	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	180	ierr )
	181	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	182	status, ierr )
[108]	183	IF ( dt_restart /= remote ) THEN
[213]	184	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	185	'": dt_restart = ', dt_restart, '& is not equal to ', &
	186	'dt_restart_remote = ', remote
[226]	187	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	188	ENDIF
[213]	189
[206]	190	CALL MPI_SEND( end_time, 1, MPI_REAL, target_id, 14, comm_inter, ierr )
	191	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	192	status, ierr )
[108]	193	IF ( end_time /= remote ) THEN
[213]	194	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	195	'": end_time = ', end_time, '& is not equal to ', &
	196	'end_time_remote = ', remote
[226]	197	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	198	ENDIF
[213]	199
[206]	200	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	201	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	202	status, ierr )
[108]	203	IF ( dx /= remote ) THEN
[213]	204	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	205	'": dx = ', dx, '& is not equal to dx_remote = ', remote
[226]	206	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
[108]	207	ENDIF
[213]	208
[206]	209	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	210	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	211	status, ierr )
[108]	212	IF ( dy /= remote ) THEN
[213]	213	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	214	'": dy = ', dy, '& is not equal to dy_remote = ', remote
[226]	215	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
[108]	216	ENDIF
[213]	217
[206]	218	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	219	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	220	status, ierr )
[108]	221	IF ( nx /= iremote ) THEN
[213]	222	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	223	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
[226]	224	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
[108]	225	ENDIF
[213]	226
[206]	227	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	228	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	229	status, ierr )
[108]	230	IF ( ny /= iremote ) THEN
[213]	231	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	232	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
[226]	233	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
[108]	234	ENDIF
[222]	235	#else
	236	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	237	' ''mrun -K parallel'''
[226]	238	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	239	#endif
	240	ENDIF
	241
[206]	242	#if defined( __parallel )
[108]	243	!
	244	!-- Exchange via intercommunicator
	245	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	246	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	247	ierr )
[108]	248	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	249	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	250	comm_inter, status, ierr )
[108]	251	ENDIF
	252	#endif
	253
	254
	255	!
[1]	256	!-- Generate the file header which is used as a header for most of PALM's
	257	!-- output files
	258	CALL DATE_AND_TIME( date, time )
	259	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	260	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	261	IF ( coupling_mode == 'uncoupled' ) THEN
	262	coupling_string = ''
	263	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	264	coupling_string = ' coupled (atmosphere)'
	265	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	266	coupling_string = ' coupled (ocean)'
	267	ENDIF
[1]	268
[102]	269	WRITE ( run_description_header, &
	270	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	271	TRIM( version ), TRIM( revision ), 'run: ', &
	272	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	273	'host: ', TRIM( host ), run_date, run_time
[1]	274
	275	!
[63]	276	!-- Check the general loop optimization method
	277	IF ( loop_optimization == 'default' ) THEN
	278	IF ( host(1:3) == 'nec' ) THEN
	279	loop_optimization = 'vector'
	280	ELSE
	281	loop_optimization = 'cache'
	282	ENDIF
	283	ENDIF
	284	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	285	.AND. loop_optimization /= 'vector' ) THEN
[213]	286	message_string = 'illegal value given for loop_optimization: "' // &
	287	TRIM( loop_optimization ) // '"'
[226]	288	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	289	ENDIF
	290
	291	!
[1]	292	!-- Check topography setting (check for illegal parameter combinations)
	293	IF ( topography /= 'flat' ) THEN
	294	action = ' '
	295	IF ( scalar_advec /= 'pw-scheme' ) THEN
	296	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	297	ENDIF
	298	IF ( momentum_advec /= 'pw-scheme' ) THEN
	299	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	300	ENDIF
[51]	301	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	302	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	303	ENDIF
[114]	304	IF ( psolver == 'sor' ) THEN
[1]	305	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	306	ENDIF
	307	IF ( sloping_surface ) THEN
	308	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	309	ENDIF
	310	IF ( galilei_transformation ) THEN
	311	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	312	ENDIF
	313	IF ( cloud_physics ) THEN
	314	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	315	ENDIF
	316	IF ( cloud_droplets ) THEN
	317	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	318	ENDIF
[75]	319	IF ( humidity ) THEN
	320	WRITE( action, '(A)' ) 'humidity = .TRUE.'
[1]	321	ENDIF
	322	IF ( .NOT. prandtl_layer ) THEN
	323	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	324	ENDIF
	325	IF ( action /= ' ' ) THEN
[213]	326	message_string = 'a non-flat topography does not allow ' // &
	327	TRIM( action )
[226]	328	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	329	ENDIF
[256]	330	!
	331	!-- In case of non-flat topography, check whether the convention how to
	332	!-- define the topography grid has been set correctly, or whether the default
	333	!-- is applicable. If this is not possible, abort.
	334	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	335	IF ( TRIM( topography ) /= 'single_building' .AND. &
	336	TRIM( topography ) /= 'single_street_canyon' .AND. &
	337	TRIM( topography ) /= 'read_from_file' ) THEN
	338	!-- The default value is not applicable here, because it is only valid
	339	!-- for the two standard cases 'single_building' and 'read_from_file'
	340	!-- defined in init_grid.
	341	WRITE( message_string, * ) &
	342	'The value for "topography_grid_convention" ', &
	343	'is not set. Its default value is & only valid for ', &
	344	'"topography" = ''single_building'', ', &
	345	'''single_street_canyon'' & or ''read_from_file''.', &
	346	' & Choose ''cell_edge'' or ''cell_center''.'
	347	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	348	ELSE
	349	!-- The default value is applicable here.
	350	!-- Set convention according to topography.
	351	IF ( TRIM( topography ) == 'single_building' .OR. &
	352	TRIM( topography ) == 'single_street_canyon' ) THEN
	353	topography_grid_convention = 'cell_edge'
	354	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	355	topography_grid_convention = 'cell_center'
	356	ENDIF
	357	ENDIF
	358	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	359	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	360	WRITE( message_string, * ) &
	361	'The value for "topography_grid_convention" is ', &
	362	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	363	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	364	ENDIF
	365
[1]	366	ENDIF
[94]	367
[1]	368	!
[94]	369	!-- Check ocean setting
	370	IF ( ocean ) THEN
	371	action = ' '
	372	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	373	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	374	ENDIF
[97]	375	IF ( momentum_advec == 'ups-scheme' ) THEN
	376	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	377	ENDIF
[94]	378	IF ( action /= ' ' ) THEN
[213]	379	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	380	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	381	ENDIF
	382	ENDIF
	383
	384	!
[1]	385	!-- Check whether there are any illegal values
	386	!-- Pressure solver:
	387	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	388	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	389	message_string = 'unknown solver for perturbation pressure: psolver' // &
	390	' = "' // TRIM( psolver ) // '"'
[226]	391	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	392	ENDIF
	393
	394	#if defined( __parallel )
	395	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	396	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	397	'for a 1d domain-decomposition along x & please do' // &
	398	' not set npey/=1 in the parameter file'
[226]	399	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	400	ENDIF
[181]	401	IF ( psolver == 'poisfft_hybrid' .AND. &
	402	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	403	psolver == 'multigrid' .AND. &
	404	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	405	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	406	'work for subdomains with unequal size & please ' // &
	407	'set grid_matching = ''strict'' in the parameter file'
[226]	408	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	409	ENDIF
	410	#else
	411	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	412	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	413	' for a parallel environment'
[226]	414	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	415	ENDIF
	416	#endif
	417
	418	IF ( psolver == 'multigrid' ) THEN
	419	IF ( cycle_mg == 'w' ) THEN
	420	gamma_mg = 2
	421	ELSEIF ( cycle_mg == 'v' ) THEN
	422	gamma_mg = 1
	423	ELSE
[213]	424	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	425	TRIM( cycle_mg ) // '"'
[226]	426	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	427	ENDIF
	428	ENDIF
	429
	430	IF ( fft_method /= 'singleton-algorithm' .AND. &
	431	fft_method /= 'temperton-algorithm' .AND. &
	432	fft_method /= 'system-specific' ) THEN
[213]	433	message_string = 'unknown fft-algorithm: fft_method = "' // &
	434	TRIM( fft_method ) // '"'
[226]	435	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	436	ENDIF
	437
	438	!
	439	!-- Advection schemes:
	440	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	441	THEN
[214]	442	message_string = 'unknown advection scheme: momentum_advec = "' // &
	443	TRIM( momentum_advec ) // '"'
[226]	444	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	445	ENDIF
	446	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	447	.AND. timestep_scheme /= 'euler' ) THEN
[214]	448	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	449	'" is not allowed with timestep_scheme = "' // &
	450	TRIM( timestep_scheme ) // '"'
[226]	451	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	452	ENDIF
	453
	454	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	455	scalar_advec /= 'ups-scheme' ) THEN
[214]	456	message_string = 'unknown advection scheme: scalar_advec = "' // &
	457	TRIM( scalar_advec ) // '"'
[226]	458	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	459	ENDIF
	460
	461	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	462	use_upstream_for_tke = .TRUE.
[214]	463	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	464	'use_sgs_for_particles = .TRUE.'
[226]	465	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	466	ENDIF
	467
	468	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	469	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	470	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	471	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	472	ENDIF
	473
	474	!
	475	!-- Timestep schemes:
	476	SELECT CASE ( TRIM( timestep_scheme ) )
	477
	478	CASE ( 'euler' )
	479	intermediate_timestep_count_max = 1
	480	asselin_filter_factor = 0.0
	481
	482	CASE ( 'leapfrog', 'leapfrog+euler' )
	483	intermediate_timestep_count_max = 1
	484
	485	CASE ( 'runge-kutta-2' )
	486	intermediate_timestep_count_max = 2
	487	asselin_filter_factor = 0.0
	488
	489	CASE ( 'runge-kutta-3' )
	490	intermediate_timestep_count_max = 3
	491	asselin_filter_factor = 0.0
	492
	493	CASE DEFAULT
[214]	494	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	495	TRIM( timestep_scheme ) // '"'
[226]	496	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	497
	498	END SELECT
	499
[63]	500	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	501	THEN
[214]	502	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	503	'" & does not work with timestep_scheme "' // &
	504	TRIM( timestep_scheme ) // '"'
[226]	505	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	506	ENDIF
	507
	508	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	509	THEN
[214]	510	message_string = 'momentum advection scheme "' // &
	511	TRIM( momentum_advec ) // '" & does not work with ' // &
	512	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	513	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	514	ENDIF
	515
[147]	516	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	517	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
[1]	518	!
[214]	519	!-- No restart run: several initialising actions are possible
[1]	520	action = initializing_actions
	521	DO WHILE ( TRIM( action ) /= '' )
	522	position = INDEX( action, ' ' )
	523	SELECT CASE ( action(1:position-1) )
	524
	525	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	526	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	527	action = action(position+1:)
	528
	529	CASE DEFAULT
[214]	530	message_string = 'initializing_action = "' // &
	531	TRIM( action ) // '" unkown or not allowed'
[226]	532	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	533
	534	END SELECT
	535	ENDDO
	536	ENDIF
[214]	537
[1]	538	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	539	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	540	message_string = 'initializing_actions = "set_constant_profiles"' // &
	541	' and "set_1d-model_profiles" are not allowed ' // &
	542	'simultaneously'
[226]	543	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	544	ENDIF
[214]	545
[46]	546	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	547	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	548	message_string = 'initializing_actions = "set_constant_profiles"' // &
	549	' and "by_user" are not allowed simultaneously'
[226]	550	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	551	ENDIF
[214]	552
[46]	553	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	554	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	555	message_string = 'initializing_actions = "by_user" and ' // &
	556	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	557	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	558	ENDIF
[1]	559
[75]	560	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	561	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	562	'not allowed with humidity = ', humidity
[226]	563	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	564	ENDIF
	565
[72]	566	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	567	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	568	'not allowed with cloud_physics = ', cloud_physics
[226]	569	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	570	ENDIF
	571
[75]	572	IF ( humidity .AND. sloping_surface ) THEN
[214]	573	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	574	'are not allowed simultaneously'
[226]	575	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	576	ENDIF
	577
[75]	578	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	579	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	580	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	581	ENDIF
	582
[75]	583	IF ( passive_scalar .AND. humidity ) THEN
[214]	584	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	585	'is not allowed simultaneously'
[226]	586	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	587	ENDIF
	588
	589	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	590	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	591	' = .TRUE.'
[226]	592	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	593	ENDIF
	594
	595	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	596	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	597	'" found for parameter grid_matching'
[226]	598	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	599	ENDIF
	600
[138]	601	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	602	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	603	'coefficient & given value is drag_coefficient = 0.0'
[226]	604	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	605	ENDIF
	606
[1]	607	!
	608	!-- In case of no model continuation run, check initialising parameters and
	609	!-- deduce further quantities
	610	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	611
	612	!
	613	!-- Initial profiles for 1D and 3D model, respectively
	614	u_init = ug_surface
	615	v_init = vg_surface
	616	pt_init = pt_surface
[94]	617	IF ( humidity ) q_init = q_surface
	618	IF ( ocean ) sa_init = sa_surface
	619	IF ( passive_scalar ) q_init = s_surface
[138]	620	IF ( plant_canopy ) lad = 0.0
[1]	621
	622	!
	623	!--
	624	!-- If required, compute initial profile of the geostrophic wind
	625	!-- (component ug)
	626	i = 1
	627	gradient = 0.0
[97]	628
	629	IF ( .NOT. ocean ) THEN
	630
	631	ug_vertical_gradient_level_ind(1) = 0
	632	ug(0) = ug_surface
	633	DO k = 1, nzt+1
[177]	634	IF ( i < 11 ) THEN
	635	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	636	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	637	gradient = ug_vertical_gradient(i) / 100.0
	638	ug_vertical_gradient_level_ind(i) = k - 1
	639	i = i + 1
[1]	640	ENDIF
[177]	641	ENDIF
[97]	642	IF ( gradient /= 0.0 ) THEN
	643	IF ( k /= 1 ) THEN
	644	ug(k) = ug(k-1) + dzu(k) * gradient
	645	ELSE
	646	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	647	ENDIF
[1]	648	ELSE
[97]	649	ug(k) = ug(k-1)
[1]	650	ENDIF
[97]	651	ENDDO
[1]	652
[97]	653	ELSE
	654
	655	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	656	ug(nzt+1) = ug_surface
[97]	657	DO k = nzt, 0, -1
[177]	658	IF ( i < 11 ) THEN
	659	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	660	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	661	gradient = ug_vertical_gradient(i) / 100.0
	662	ug_vertical_gradient_level_ind(i) = k + 1
	663	i = i + 1
[97]	664	ENDIF
	665	ENDIF
	666	IF ( gradient /= 0.0 ) THEN
	667	IF ( k /= nzt ) THEN
	668	ug(k) = ug(k+1) - dzu(k+1) * gradient
	669	ELSE
	670	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	671	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	672	ENDIF
	673	ELSE
	674	ug(k) = ug(k+1)
	675	ENDIF
	676	ENDDO
	677
	678	ENDIF
	679
[1]	680	u_init = ug
	681
	682	!
	683	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	684	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	685	ug_vertical_gradient_level(1) = 0.0
	686	ENDIF
	687
	688	!
	689	!--
	690	!-- If required, compute initial profile of the geostrophic wind
	691	!-- (component vg)
	692	i = 1
	693	gradient = 0.0
[97]	694
	695	IF ( .NOT. ocean ) THEN
	696
	697	vg_vertical_gradient_level_ind(1) = 0
	698	vg(0) = vg_surface
	699	DO k = 1, nzt+1
[177]	700	IF ( i < 11 ) THEN
	701	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	702	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	703	gradient = vg_vertical_gradient(i) / 100.0
	704	vg_vertical_gradient_level_ind(i) = k - 1
	705	i = i + 1
[1]	706	ENDIF
	707	ENDIF
[97]	708	IF ( gradient /= 0.0 ) THEN
	709	IF ( k /= 1 ) THEN
	710	vg(k) = vg(k-1) + dzu(k) * gradient
	711	ELSE
	712	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	713	ENDIF
[1]	714	ELSE
[97]	715	vg(k) = vg(k-1)
[1]	716	ENDIF
[97]	717	ENDDO
[1]	718
[97]	719	ELSE
	720
[121]	721	vg_vertical_gradient_level_ind(1) = nzt+1
	722	vg(nzt+1) = vg_surface
[97]	723	DO k = nzt, 0, -1
[177]	724	IF ( i < 11 ) THEN
	725	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	726	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	727	gradient = vg_vertical_gradient(i) / 100.0
	728	vg_vertical_gradient_level_ind(i) = k + 1
	729	i = i + 1
[97]	730	ENDIF
	731	ENDIF
	732	IF ( gradient /= 0.0 ) THEN
	733	IF ( k /= nzt ) THEN
	734	vg(k) = vg(k+1) - dzu(k+1) * gradient
	735	ELSE
	736	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	737	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	738	ENDIF
	739	ELSE
	740	vg(k) = vg(k+1)
	741	ENDIF
	742	ENDDO
	743
	744	ENDIF
	745
[1]	746	v_init = vg
	747
	748	!
	749	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	750	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	751	vg_vertical_gradient_level(1) = 0.0
	752	ENDIF
	753
	754	!
[94]	755	!-- Compute initial temperature profile using the given temperature gradients
[1]	756	i = 1
	757	gradient = 0.0
[94]	758
	759	IF ( .NOT. ocean ) THEN
	760
	761	pt_vertical_gradient_level_ind(1) = 0
	762	DO k = 1, nzt+1
[177]	763	IF ( i < 11 ) THEN
	764	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	765	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	766	gradient = pt_vertical_gradient(i) / 100.0
	767	pt_vertical_gradient_level_ind(i) = k - 1
	768	i = i + 1
[1]	769	ENDIF
	770	ENDIF
[94]	771	IF ( gradient /= 0.0 ) THEN
	772	IF ( k /= 1 ) THEN
	773	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	774	ELSE
	775	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	776	ENDIF
[1]	777	ELSE
[94]	778	pt_init(k) = pt_init(k-1)
[1]	779	ENDIF
[94]	780	ENDDO
[1]	781
[94]	782	ELSE
	783
	784	pt_vertical_gradient_level_ind(1) = nzt+1
	785	DO k = nzt, 0, -1
[177]	786	IF ( i < 11 ) THEN
	787	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	788	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	789	gradient = pt_vertical_gradient(i) / 100.0
	790	pt_vertical_gradient_level_ind(i) = k + 1
	791	i = i + 1
[94]	792	ENDIF
	793	ENDIF
	794	IF ( gradient /= 0.0 ) THEN
	795	IF ( k /= nzt ) THEN
	796	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	797	ELSE
	798	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	799	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	800	ENDIF
	801	ELSE
	802	pt_init(k) = pt_init(k+1)
	803	ENDIF
	804	ENDDO
	805
	806	ENDIF
	807
[1]	808	!
	809	!-- In case of no given temperature gradients, choose gradient of neutral
	810	!-- stratification
[94]	811	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	812	pt_vertical_gradient_level(1) = 0.0
	813	ENDIF
	814
	815	!
[94]	816	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	817	!-- boundary condition
[19]	818	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	819
	820	!
	821	!-- If required, compute initial humidity or scalar profile using the given
	822	!-- humidity/scalar gradient. In case of scalar transport, initially store
	823	!-- values of the scalar parameters on humidity parameters
	824	IF ( passive_scalar ) THEN
	825	bc_q_b = bc_s_b
	826	bc_q_t = bc_s_t
	827	q_surface = s_surface
	828	q_surface_initial_change = s_surface_initial_change
	829	q_vertical_gradient = s_vertical_gradient
	830	q_vertical_gradient_level = s_vertical_gradient_level
	831	surface_waterflux = surface_scalarflux
	832	ENDIF
	833
[75]	834	IF ( humidity .OR. passive_scalar ) THEN
[1]	835
	836	i = 1
	837	gradient = 0.0
	838	q_vertical_gradient_level_ind(1) = 0
	839	DO k = 1, nzt+1
[177]	840	IF ( i < 11 ) THEN
	841	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	842	q_vertical_gradient_level(i) >= 0.0 ) THEN
	843	gradient = q_vertical_gradient(i) / 100.0
	844	q_vertical_gradient_level_ind(i) = k - 1
	845	i = i + 1
[1]	846	ENDIF
	847	ENDIF
	848	IF ( gradient /= 0.0 ) THEN
	849	IF ( k /= 1 ) THEN
	850	q_init(k) = q_init(k-1) + dzu(k) * gradient
	851	ELSE
	852	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	853	ENDIF
	854	ELSE
	855	q_init(k) = q_init(k-1)
	856	ENDIF
[72]	857	!
	858	!-- Avoid negative humidities
	859	IF ( q_init(k) < 0.0 ) THEN
	860	q_init(k) = 0.0
	861	ENDIF
[1]	862	ENDDO
	863
	864	!
	865	!-- In case of no given humidity gradients, choose zero gradient
	866	!-- conditions
	867	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	868	q_vertical_gradient_level(1) = 0.0
	869	ENDIF
	870
	871	!
	872	!-- Store humidity gradient at the top boundary for possile Neumann
	873	!-- boundary condition
[19]	874	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	875
	876	ENDIF
	877
[94]	878	!
	879	!-- If required, compute initial salinity profile using the given salinity
	880	!-- gradients
	881	IF ( ocean ) THEN
	882
	883	i = 1
	884	gradient = 0.0
	885
	886	sa_vertical_gradient_level_ind(1) = nzt+1
	887	DO k = nzt, 0, -1
[177]	888	IF ( i < 11 ) THEN
	889	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	890	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	891	gradient = sa_vertical_gradient(i) / 100.0
	892	sa_vertical_gradient_level_ind(i) = k + 1
	893	i = i + 1
[94]	894	ENDIF
	895	ENDIF
	896	IF ( gradient /= 0.0 ) THEN
	897	IF ( k /= nzt ) THEN
	898	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	899	ELSE
	900	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	901	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	902	ENDIF
	903	ELSE
	904	sa_init(k) = sa_init(k+1)
	905	ENDIF
	906	ENDDO
	907
	908	ENDIF
	909
[138]	910	!
	911	!-- If required compute the profile of leaf area density used in the plant canopy model
	912	IF ( plant_canopy ) THEN
	913
	914	i = 1
	915	gradient = 0.0
[1]	916
[138]	917	IF ( .NOT. ocean ) THEN
[153]	918
	919	lad(0) = lad_surface
[138]	920
	921	lad_vertical_gradient_level_ind(1) = 0
	922	DO k = 1, pch_index
[177]	923	IF ( i < 11 ) THEN
	924	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	925	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	926	gradient = lad_vertical_gradient(i)
	927	lad_vertical_gradient_level_ind(i) = k - 1
	928	i = i + 1
[138]	929	ENDIF
	930	ENDIF
	931	IF ( gradient /= 0.0 ) THEN
	932	IF ( k /= 1 ) THEN
	933	lad(k) = lad(k-1) + dzu(k) * gradient
	934	ELSE
	935	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	936	ENDIF
	937	ELSE
	938	lad(k) = lad(k-1)
	939	ENDIF
	940	ENDDO
	941
	942	ENDIF
	943
[1]	944	!
[138]	945	!-- In case of no given leaf area density gradients, choose a vanishing gradient
	946	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	947	lad_vertical_gradient_level(1) = 0.0
	948	ENDIF
	949
	950	ENDIF
	951
	952	ENDIF
	953
	954	!
[1]	955	!-- Compute Coriolis parameter
	956	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	957	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	958
	959	!
[97]	960	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	961	!-- set the reference temperature equal to the surface temperature.
	962	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	963
	964	!
[97]	965	!-- Reference value has to be used in buoyancy terms
	966	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	967
	968	!
	969	!-- Sign of buoyancy/stability terms
	970	IF ( ocean ) atmos_ocean_sign = -1.0
	971
	972	!
[108]	973	!-- Ocean version must use flux boundary conditions at the top
	974	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	975	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	976	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	977	ENDIF
[97]	978
	979	!
[1]	980	!-- In case of a given slope, compute the relevant quantities
	981	IF ( alpha_surface /= 0.0 ) THEN
	982	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	983	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	984	' ) must be < 90.0'
[226]	985	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	986	ENDIF
	987	sloping_surface = .TRUE.
	988	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	989	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	990	ENDIF
	991
	992	!
	993	!-- Check time step and cfl_factor
	994	IF ( dt /= -1.0 ) THEN
	995	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	996	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	997	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	998	ENDIF
	999	dt_3d = dt
	1000	dt_fixed = .TRUE.
	1001	ENDIF
	1002
	1003	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1004	IF ( cfl_factor == -1.0 ) THEN
	1005	IF ( momentum_advec == 'ups-scheme' .OR. &
	1006	scalar_advec == 'ups-scheme' ) THEN
	1007	cfl_factor = 0.8
	1008	ELSE
	1009	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1010	cfl_factor = 0.8
	1011	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1012	cfl_factor = 0.9
	1013	ELSE
	1014	cfl_factor = 0.1
	1015	ENDIF
	1016	ENDIF
	1017	ELSE
[215]	1018	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1019	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1020	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1021	ENDIF
	1022	ENDIF
	1023
	1024	!
	1025	!-- Store simulated time at begin
	1026	simulated_time_at_begin = simulated_time
	1027
	1028	!
	1029	!-- Set wind speed in the Galilei-transformed system
	1030	IF ( galilei_transformation ) THEN
	1031	IF ( use_ug_for_galilei_tr .AND. &
	1032	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1033	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1034	u_gtrans = ug_surface
	1035	v_gtrans = vg_surface
	1036	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1037	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1038	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1039	' with galilei transformation'
[226]	1040	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1041	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1042	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1043	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1044	' with galilei transformation'
[226]	1045	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1046	ELSE
[215]	1047	message_string = 'variable translation speed used for galilei-' // &
	1048	'transformation, which may cause & instabilities in stably ' // &
	1049	'stratified regions'
[226]	1050	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1051	ENDIF
	1052	ENDIF
	1053
	1054	!
	1055	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1056	!-- fluxes have to be used in the diffusion-terms
	1057	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1058
	1059	!
	1060	!-- Check boundary conditions and set internal variables:
	1061	!-- Lateral boundary conditions
[73]	1062	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1063	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1064	message_string = 'unknown boundary condition: bc_lr = "' // &
	1065	TRIM( bc_lr ) // '"'
[226]	1066	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1067	ENDIF
[73]	1068	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1069	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1070	message_string = 'unknown boundary condition: bc_ns = "' // &
	1071	TRIM( bc_ns ) // '"'
[226]	1072	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1073	ENDIF
	1074
	1075	!
	1076	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1077	!-- Willimas advection scheme. Several schemes and tools do not work with
	1078	!-- non-cyclic boundary conditions.
	1079	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1080	IF ( psolver /= 'multigrid' ) THEN
[215]	1081	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1082	'psolver = "' // TRIM( psolver ) // '"'
[226]	1083	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1084	ENDIF
	1085	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1086	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1087	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1088	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1089	ENDIF
	1090	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1091	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1092	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1093	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1094	ENDIF
	1095	IF ( galilei_transformation ) THEN
[215]	1096	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1097	'galilei_transformation = .T.'
[226]	1098	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1099	ENDIF
	1100	ENDIF
	1101
	1102	!
	1103	!-- Bottom boundary condition for the turbulent Kinetic energy
	1104	IF ( bc_e_b == 'neumann' ) THEN
	1105	ibc_e_b = 1
	1106	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1107	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1108	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1109	ENDIF
	1110	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1111	ibc_e_b = 2
	1112	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1113	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1114	TRIM( bc_e_b ) // '"'
[226]	1115	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1116	ENDIF
	1117	IF ( .NOT. prandtl_layer ) THEN
	1118	bc_e_b = 'neumann'
	1119	ibc_e_b = 1
[215]	1120	message_string = 'boundary condition bc_e_b changed to "' // &
	1121	TRIM( bc_e_b ) // '"'
[226]	1122	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1123	ENDIF
	1124	ELSE
[215]	1125	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1126	TRIM( bc_e_b ) // '"'
[226]	1127	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1128	ENDIF
	1129
	1130	!
	1131	!-- Boundary conditions for perturbation pressure
	1132	IF ( bc_p_b == 'dirichlet' ) THEN
	1133	ibc_p_b = 0
	1134	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1135	ibc_p_b = 1
	1136	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1137	ibc_p_b = 2
	1138	ELSE
[215]	1139	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1140	TRIM( bc_p_b ) // '"'
[226]	1141	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1142	ENDIF
	1143	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1144	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1145	'" not allowed with prandtl_layer = .FALSE.'
[226]	1146	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1147	ENDIF
	1148	IF ( bc_p_t == 'dirichlet' ) THEN
	1149	ibc_p_t = 0
	1150	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1151	ibc_p_t = 1
	1152	ELSE
[215]	1153	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1154	TRIM( bc_p_t ) // '"'
[226]	1155	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1156	ENDIF
	1157
	1158	!
	1159	!-- Boundary conditions for potential temperature
[102]	1160	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1161	ibc_pt_b = 2
[1]	1162	ELSE
[102]	1163	IF ( bc_pt_b == 'dirichlet' ) THEN
	1164	ibc_pt_b = 0
	1165	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1166	ibc_pt_b = 1
	1167	ELSE
[215]	1168	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1169	TRIM( bc_pt_b ) // '"'
[226]	1170	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1171	ENDIF
	1172	ENDIF
[102]	1173
[1]	1174	IF ( bc_pt_t == 'dirichlet' ) THEN
	1175	ibc_pt_t = 0
	1176	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1177	ibc_pt_t = 1
[19]	1178	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1179	ibc_pt_t = 2
[1]	1180	ELSE
[215]	1181	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1182	TRIM( bc_pt_t ) // '"'
[226]	1183	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1184	ENDIF
	1185
[20]	1186	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1187	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1188	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1189	top_momentumflux_v /= 9999999.9 ) THEN
	1190	constant_top_momentumflux = .TRUE.
	1191	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1192	top_momentumflux_v == 9999999.9 ) ) THEN
	1193	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1194	'must be set'
[226]	1195	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1196	ENDIF
[1]	1197
	1198	!
	1199	!-- A given surface temperature implies Dirichlet boundary condition for
	1200	!-- temperature. In this case specification of a constant heat flux is
	1201	!-- forbidden.
	1202	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1203	surface_heatflux /= 0.0 ) THEN
[215]	1204	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1205	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1206	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1207	ENDIF
	1208	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1209	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1210	'wed with pt_surface_initial_change (/=0) = ', &
	1211	pt_surface_initial_change
[226]	1212	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1213	ENDIF
	1214
	1215	!
[19]	1216	!-- A given temperature at the top implies Dirichlet boundary condition for
	1217	!-- temperature. In this case specification of a constant heat flux is
	1218	!-- forbidden.
	1219	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1220	top_heatflux /= 0.0 ) THEN
[215]	1221	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1222	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1223	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1224	ENDIF
	1225
	1226	!
[95]	1227	!-- Boundary conditions for salinity
	1228	IF ( ocean ) THEN
	1229	IF ( bc_sa_t == 'dirichlet' ) THEN
	1230	ibc_sa_t = 0
	1231	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1232	ibc_sa_t = 1
	1233	ELSE
[215]	1234	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1235	TRIM( bc_sa_t ) // '"'
[226]	1236	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1237	ENDIF
	1238
	1239	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1240	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1241	message_string = 'boundary condition: bc_sa_t = "' // &
	1242	TRIM( bc_sa_t ) // '" requires to set ' // &
	1243	'top_salinityflux'
[226]	1244	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1245	ENDIF
[95]	1246
	1247	!
	1248	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1249	!-- salinity. In this case specification of a constant salinity flux is
	1250	!-- forbidden.
	1251	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1252	top_salinityflux /= 0.0 ) THEN
[215]	1253	message_string = 'boundary condition: bc_sa_t = "' // &
	1254	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1255	'constant_top_salinityflux = .TRUE.'
[226]	1256	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1257	ENDIF
	1258
	1259	ENDIF
	1260
	1261	!
[75]	1262	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1263	!-- water content / scalar
[75]	1264	IF ( humidity .OR. passive_scalar ) THEN
	1265	IF ( humidity ) THEN
[1]	1266	sq = 'q'
	1267	ELSE
	1268	sq = 's'
	1269	ENDIF
	1270	IF ( bc_q_b == 'dirichlet' ) THEN
	1271	ibc_q_b = 0
	1272	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1273	ibc_q_b = 1
	1274	ELSE
[215]	1275	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1276	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1277	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1278	ENDIF
	1279	IF ( bc_q_t == 'dirichlet' ) THEN
	1280	ibc_q_t = 0
	1281	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1282	ibc_q_t = 1
	1283	ELSE
[215]	1284	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1285	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1286	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1287	ENDIF
	1288
	1289	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1290
	1291	!
	1292	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1293	!-- humidity. In this case specification of a constant water flux is
[1]	1294	!-- forbidden.
	1295	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1296	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1297	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1298	'th prescribed surface flux'
[226]	1299	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1300	ENDIF
	1301	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1302	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1303	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1304	q_surface_initial_change
[226]	1305	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1306	ENDIF
	1307
	1308	ENDIF
	1309
	1310	!
	1311	!-- Boundary conditions for horizontal components of wind speed
	1312	IF ( bc_uv_b == 'dirichlet' ) THEN
	1313	ibc_uv_b = 0
	1314	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1315	ibc_uv_b = 1
	1316	IF ( prandtl_layer ) THEN
[215]	1317	message_string = 'boundary condition: bc_uv_b = "' // &
	1318	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1319	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1320	ENDIF
	1321	ELSE
[215]	1322	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1323	TRIM( bc_uv_b ) // '"'
[226]	1324	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1325	ENDIF
[215]	1326
[108]	1327	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1328	bc_uv_t = 'neumann'
[1]	1329	ibc_uv_t = 1
	1330	ELSE
[132]	1331	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1332	ibc_uv_t = 0
	1333	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1334	ibc_uv_t = 1
	1335	ELSE
[215]	1336	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1337	TRIM( bc_uv_t ) // '"'
[226]	1338	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1339	ENDIF
	1340	ENDIF
	1341
	1342	!
	1343	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1344	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1345	IF ( momentum_advec == 'ups-scheme' ) THEN
	1346	rayleigh_damping_factor = 0.01
	1347	ELSE
	1348	rayleigh_damping_factor = 0.0
	1349	ENDIF
	1350	ELSE
	1351	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1352	THEN
[215]	1353	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1354	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1355	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1356	ENDIF
	1357	ENDIF
	1358
	1359	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1360	IF ( .NOT. ocean ) THEN
	1361	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1362	ELSE
	1363	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1364	ENDIF
[1]	1365	ELSE
[108]	1366	IF ( .NOT. ocean ) THEN
	1367	IF ( rayleigh_damping_height < 0.0 .OR. &
	1368	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1369	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1370	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1371	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1372	ENDIF
[108]	1373	ELSE
	1374	IF ( rayleigh_damping_height > 0.0 .OR. &
	1375	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1376	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1377	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1378	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1379	ENDIF
[1]	1380	ENDIF
	1381	ENDIF
	1382
	1383	!
	1384	!-- Check limiters for Upstream-Spline scheme
	1385	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1386	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1387	overshoot_limit_e < 0.0 ) THEN
[215]	1388	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1389	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1390	ENDIF
	1391	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1392	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1393	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1394	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1395	ENDIF
	1396
	1397	!
	1398	!-- Check number of chosen statistic regions. More than 10 regions are not
	1399	!-- allowed, because so far no more than 10 corresponding output files can
	1400	!-- be opened (cf. check_open)
	1401	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1402	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1403	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1404	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1405	ENDIF
	1406	IF ( normalizing_region > statistic_regions .OR. &
	1407	normalizing_region < 0) THEN
[215]	1408	WRITE ( message_string, * ) 'normalizing_region = ', &
	1409	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1410	' (value of statistic_regions)'
[226]	1411	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1412	ENDIF
	1413
	1414	!
[116]	1415	!-- Check the interval for sorting particles.
	1416	!-- Using particles as cloud droplets requires sorting after each timestep.
	1417	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1418	dt_sort_particles = 0.0
[215]	1419	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1420	'_droplets = .TRUE.'
[226]	1421	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1422	ENDIF
	1423
	1424	!
[1]	1425	!-- Set the default intervals for data output, if necessary
	1426	!-- NOTE: dt_dosp has already been set in package_parin
	1427	IF ( dt_data_output /= 9999999.9 ) THEN
	1428	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1429	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1430	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1431	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1432	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1433	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1434	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1435	ENDIF
	1436
	1437	!
	1438	!-- Set the default skip time intervals for data output, if necessary
	1439	IF ( skip_time_dopr == 9999999.9 ) &
	1440	skip_time_dopr = skip_time_data_output
	1441	IF ( skip_time_dosp == 9999999.9 ) &
	1442	skip_time_dosp = skip_time_data_output
	1443	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1444	skip_time_do2d_xy = skip_time_data_output
	1445	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1446	skip_time_do2d_xz = skip_time_data_output
	1447	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1448	skip_time_do2d_yz = skip_time_data_output
	1449	IF ( skip_time_do3d == 9999999.9 ) &
	1450	skip_time_do3d = skip_time_data_output
	1451	IF ( skip_time_data_output_av == 9999999.9 ) &
	1452	skip_time_data_output_av = skip_time_data_output
	1453
	1454	!
	1455	!-- Check the average intervals (first for 3d-data, then for profiles and
	1456	!-- spectra)
	1457	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1458	WRITE( message_string, * ) 'averaging_interval = ', &
	1459	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1460	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1461	ENDIF
	1462
	1463	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1464	averaging_interval_pr = averaging_interval
	1465	ENDIF
	1466
	1467	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1468	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1469	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1470	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1471	ENDIF
	1472
	1473	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1474	averaging_interval_sp = averaging_interval
	1475	ENDIF
	1476
	1477	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1478	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1479	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1480	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1481	ENDIF
	1482
	1483	!
	1484	!-- Set the default interval for profiles entering the temporal average
	1485	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1486	dt_averaging_input_pr = dt_averaging_input
	1487	ENDIF
	1488
	1489	!
	1490	!-- Set the default interval for the output of timeseries to a reasonable
	1491	!-- value (tries to minimize the number of calls of flow_statistics)
	1492	IF ( dt_dots == 9999999.9 ) THEN
	1493	IF ( averaging_interval_pr == 0.0 ) THEN
	1494	dt_dots = MIN( dt_run_control, dt_dopr )
	1495	ELSE
	1496	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1497	ENDIF
	1498	ENDIF
	1499
	1500	!
	1501	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1502	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1503	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1504	dt_averaging_input, ' must be <= averaging_interval = ', &
	1505	averaging_interval
[226]	1506	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1507	ENDIF
	1508
	1509	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1510	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1511	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1512	averaging_interval_pr
[226]	1513	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1514	ENDIF
	1515
	1516	!
[72]	1517	!-- Set the default value for the integration interval of precipitation amount
	1518	IF ( precipitation ) THEN
	1519	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1520	precipitation_amount_interval = dt_do2d_xy
	1521	ELSE
	1522	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1523	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1524	precipitation_amount_interval, ' must not be larger than ', &
	1525	'dt_do2d_xy = ', dt_do2d_xy
[226]	1526	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1527	ENDIF
	1528	ENDIF
	1529	ENDIF
	1530
	1531	!
[1]	1532	!-- Determine the number of output profiles and check whether they are
	1533	!-- permissible
	1534	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1535
	1536	dopr_n = dopr_n + 1
	1537	i = dopr_n
	1538
	1539	!
	1540	!-- Determine internal profile number (for hom, homs)
	1541	!-- and store height levels
	1542	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1543
	1544	CASE ( 'u', '#u' )
	1545	dopr_index(i) = 1
[87]	1546	dopr_unit(i) = 'm/s'
[1]	1547	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1548	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1549	dopr_initial_index(i) = 5
	1550	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1551	data_output_pr(i) = data_output_pr(i)(2:)
	1552	ENDIF
	1553
	1554	CASE ( 'v', '#v' )
	1555	dopr_index(i) = 2
[87]	1556	dopr_unit(i) = 'm/s'
	1557	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1558	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1559	dopr_initial_index(i) = 6
	1560	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1561	data_output_pr(i) = data_output_pr(i)(2:)
	1562	ENDIF
	1563
	1564	CASE ( 'w' )
	1565	dopr_index(i) = 3
[87]	1566	dopr_unit(i) = 'm/s'
	1567	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1568
	1569	CASE ( 'pt', '#pt' )
	1570	IF ( .NOT. cloud_physics ) THEN
	1571	dopr_index(i) = 4
[87]	1572	dopr_unit(i) = 'K'
[1]	1573	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1574	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1575	dopr_initial_index(i) = 7
	1576	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1577	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1578	data_output_pr(i) = data_output_pr(i)(2:)
	1579	ENDIF
	1580	ELSE
	1581	dopr_index(i) = 43
[87]	1582	dopr_unit(i) = 'K'
[1]	1583	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1584	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1585	dopr_initial_index(i) = 28
	1586	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1587	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1588	data_output_pr(i) = data_output_pr(i)(2:)
	1589	ENDIF
	1590	ENDIF
	1591
	1592	CASE ( 'e' )
	1593	dopr_index(i) = 8
[87]	1594	dopr_unit(i) = 'm2/s2'
[1]	1595	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1596	hom(nzb,2,8,:) = 0.0
	1597
	1598	CASE ( 'km', '#km' )
	1599	dopr_index(i) = 9
[87]	1600	dopr_unit(i) = 'm2/s'
[1]	1601	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1602	hom(nzb,2,9,:) = 0.0
	1603	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1604	dopr_initial_index(i) = 23
	1605	hom(:,2,23,:) = hom(:,2,9,:)
	1606	data_output_pr(i) = data_output_pr(i)(2:)
	1607	ENDIF
	1608
	1609	CASE ( 'kh', '#kh' )
	1610	dopr_index(i) = 10
[87]	1611	dopr_unit(i) = 'm2/s'
[1]	1612	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1613	hom(nzb,2,10,:) = 0.0
	1614	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1615	dopr_initial_index(i) = 24
	1616	hom(:,2,24,:) = hom(:,2,10,:)
	1617	data_output_pr(i) = data_output_pr(i)(2:)
	1618	ENDIF
	1619
	1620	CASE ( 'l', '#l' )
	1621	dopr_index(i) = 11
[87]	1622	dopr_unit(i) = 'm'
[1]	1623	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1624	hom(nzb,2,11,:) = 0.0
	1625	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1626	dopr_initial_index(i) = 25
	1627	hom(:,2,25,:) = hom(:,2,11,:)
	1628	data_output_pr(i) = data_output_pr(i)(2:)
	1629	ENDIF
	1630
	1631	CASE ( 'w"u"' )
	1632	dopr_index(i) = 12
[87]	1633	dopr_unit(i) = 'm2/s2'
[1]	1634	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1635	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1636
	1637	CASE ( 'wu' )
	1638	dopr_index(i) = 13
[87]	1639	dopr_unit(i) = 'm2/s2'
[1]	1640	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1641
	1642	CASE ( 'w"v"' )
	1643	dopr_index(i) = 14
[87]	1644	dopr_unit(i) = 'm2/s2'
[1]	1645	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1646	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1647
	1648	CASE ( 'wv' )
	1649	dopr_index(i) = 15
[87]	1650	dopr_unit(i) = 'm2/s2'
[1]	1651	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1652
	1653	CASE ( 'w"pt"' )
	1654	dopr_index(i) = 16
[87]	1655	dopr_unit(i) = 'K m/s'
[1]	1656	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1657
	1658	CASE ( 'wpt' )
	1659	dopr_index(i) = 17
[87]	1660	dopr_unit(i) = 'K m/s'
[1]	1661	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1662
	1663	CASE ( 'wpt' )
	1664	dopr_index(i) = 18
[87]	1665	dopr_unit(i) = 'K m/s'
[1]	1666	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1667
	1668	CASE ( 'wu' )
	1669	dopr_index(i) = 19
[87]	1670	dopr_unit(i) = 'm2/s2'
[1]	1671	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1672	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1673
	1674	CASE ( 'wv' )
	1675	dopr_index(i) = 20
[87]	1676	dopr_unit(i) = 'm2/s2'
[1]	1677	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1678	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1679
	1680	CASE ( 'wptBC' )
	1681	dopr_index(i) = 21
[87]	1682	dopr_unit(i) = 'K m/s'
[1]	1683	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1684
	1685	CASE ( 'wptBC' )
	1686	dopr_index(i) = 22
[87]	1687	dopr_unit(i) = 'K m/s'
[1]	1688	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1689
[96]	1690	CASE ( 'sa', '#sa' )
	1691	IF ( .NOT. ocean ) THEN
[215]	1692	message_string = 'data_output_pr = ' // &
	1693	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1694	'lemented for ocean = .FALSE.'
[226]	1695	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1696	ELSE
	1697	dopr_index(i) = 23
	1698	dopr_unit(i) = 'psu'
	1699	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1700	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1701	dopr_initial_index(i) = 26
	1702	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1703	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1704	data_output_pr(i) = data_output_pr(i)(2:)
	1705	ENDIF
	1706	ENDIF
	1707
[1]	1708	CASE ( 'u*2' )
	1709	dopr_index(i) = 30
[87]	1710	dopr_unit(i) = 'm2/s2'
[1]	1711	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1712
	1713	CASE ( 'v*2' )
	1714	dopr_index(i) = 31
[87]	1715	dopr_unit(i) = 'm2/s2'
[1]	1716	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1717
	1718	CASE ( 'w*2' )
	1719	dopr_index(i) = 32
[87]	1720	dopr_unit(i) = 'm2/s2'
[1]	1721	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1722
	1723	CASE ( 'pt*2' )
	1724	dopr_index(i) = 33
[87]	1725	dopr_unit(i) = 'K2'
[1]	1726	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1727
	1728	CASE ( 'e*' )
	1729	dopr_index(i) = 34
[87]	1730	dopr_unit(i) = 'm2/s2'
[1]	1731	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1732
	1733	CASE ( 'w2pt' )
	1734	dopr_index(i) = 35
[87]	1735	dopr_unit(i) = 'K m2/s2'
[1]	1736	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1737
	1738	CASE ( 'wpt2' )
	1739	dopr_index(i) = 36
[87]	1740	dopr_unit(i) = 'K2 m/s'
[1]	1741	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1742
	1743	CASE ( 'we' )
	1744	dopr_index(i) = 37
[87]	1745	dopr_unit(i) = 'm3/s3'
[1]	1746	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1747
	1748	CASE ( 'w*3' )
	1749	dopr_index(i) = 38
[87]	1750	dopr_unit(i) = 'm3/s3'
[1]	1751	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1752
	1753	CASE ( 'Sw' )
	1754	dopr_index(i) = 39
[89]	1755	dopr_unit(i) = 'none'
[1]	1756	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1757
[232]	1758	CASE ( 'p' )
	1759	dopr_index(i) = 40
	1760	dopr_unit(i) = 'Pa'
	1761	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1762
[1]	1763	CASE ( 'q', '#q' )
[108]	1764	IF ( .NOT. humidity ) THEN
[215]	1765	message_string = 'data_output_pr = ' // &
	1766	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1767	'lemented for humidity = .FALSE.'
[226]	1768	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1769	ELSE
	1770	dopr_index(i) = 41
[87]	1771	dopr_unit(i) = 'kg/kg'
	1772	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1773	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1774	dopr_initial_index(i) = 26
	1775	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1776	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1777	data_output_pr(i) = data_output_pr(i)(2:)
	1778	ENDIF
	1779	ENDIF
	1780
	1781	CASE ( 's', '#s' )
	1782	IF ( .NOT. passive_scalar ) THEN
[215]	1783	message_string = 'data_output_pr = ' // &
	1784	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1785	'lemented for passive_scalar = .FALSE.'
[226]	1786	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1787	ELSE
	1788	dopr_index(i) = 41
[87]	1789	dopr_unit(i) = 'kg/m3'
	1790	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1791	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1792	dopr_initial_index(i) = 26
	1793	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1794	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1795	data_output_pr(i) = data_output_pr(i)(2:)
	1796	ENDIF
	1797	ENDIF
	1798
	1799	CASE ( 'qv', '#qv' )
	1800	IF ( .NOT. cloud_physics ) THEN
	1801	dopr_index(i) = 41
[87]	1802	dopr_unit(i) = 'kg/kg'
	1803	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1804	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1805	dopr_initial_index(i) = 26
	1806	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1807	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1808	data_output_pr(i) = data_output_pr(i)(2:)
	1809	ENDIF
	1810	ELSE
	1811	dopr_index(i) = 42
[87]	1812	dopr_unit(i) = 'kg/kg'
	1813	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1814	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1815	dopr_initial_index(i) = 27
	1816	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1817	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1818	data_output_pr(i) = data_output_pr(i)(2:)
	1819	ENDIF
	1820	ENDIF
	1821
	1822	CASE ( 'lpt', '#lpt' )
	1823	IF ( .NOT. cloud_physics ) THEN
[215]	1824	message_string = 'data_output_pr = ' // &
	1825	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1826	'lemented for cloud_physics = .FALSE.'
[226]	1827	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	1828	ELSE
	1829	dopr_index(i) = 4
[87]	1830	dopr_unit(i) = 'K'
[1]	1831	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1832	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1833	dopr_initial_index(i) = 7
	1834	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1835	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1836	data_output_pr(i) = data_output_pr(i)(2:)
	1837	ENDIF
	1838	ENDIF
	1839
	1840	CASE ( 'vpt', '#vpt' )
	1841	dopr_index(i) = 44
[87]	1842	dopr_unit(i) = 'K'
	1843	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1844	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1845	dopr_initial_index(i) = 29
	1846	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1847	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1848	data_output_pr(i) = data_output_pr(i)(2:)
	1849	ENDIF
	1850
	1851	CASE ( 'w"vpt"' )
	1852	dopr_index(i) = 45
[87]	1853	dopr_unit(i) = 'K m/s'
[1]	1854	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1855
	1856	CASE ( 'wvpt' )
	1857	dopr_index(i) = 46
[87]	1858	dopr_unit(i) = 'K m/s'
[1]	1859	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1860
	1861	CASE ( 'wvpt' )
	1862	dopr_index(i) = 47
[87]	1863	dopr_unit(i) = 'K m/s'
[1]	1864	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1865
	1866	CASE ( 'w"q"' )
[108]	1867	IF ( .NOT. humidity ) THEN
[215]	1868	message_string = 'data_output_pr = ' // &
	1869	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1870	'lemented for humidity = .FALSE.'
[226]	1871	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1872	ELSE
	1873	dopr_index(i) = 48
[87]	1874	dopr_unit(i) = 'kg/kg m/s'
[1]	1875	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1876	ENDIF
	1877
	1878	CASE ( 'wq' )
[108]	1879	IF ( .NOT. humidity ) THEN
[215]	1880	message_string = 'data_output_pr = ' // &
	1881	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1882	'lemented for humidity = .FALSE.'
[226]	1883	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1884	ELSE
	1885	dopr_index(i) = 49
[87]	1886	dopr_unit(i) = 'kg/kg m/s'
[1]	1887	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1888	ENDIF
	1889
	1890	CASE ( 'wq' )
[108]	1891	IF ( .NOT. humidity ) THEN
[215]	1892	message_string = 'data_output_pr = ' // &
	1893	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1894	'lemented for humidity = .FALSE.'
[226]	1895	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1896	ELSE
	1897	dopr_index(i) = 50
[87]	1898	dopr_unit(i) = 'kg/kg m/s'
[1]	1899	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1900	ENDIF
	1901
	1902	CASE ( 'w"s"' )
	1903	IF ( .NOT. passive_scalar ) THEN
[215]	1904	message_string = 'data_output_pr = ' // &
	1905	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1906	'lemented for passive_scalar = .FALSE.'
[226]	1907	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1908	ELSE
	1909	dopr_index(i) = 48
[87]	1910	dopr_unit(i) = 'kg/m3 m/s'
[1]	1911	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1912	ENDIF
	1913
	1914	CASE ( 'ws' )
	1915	IF ( .NOT. passive_scalar ) THEN
[215]	1916	message_string = 'data_output_pr = ' // &
	1917	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1918	'lemented for passive_scalar = .FALSE.'
[226]	1919	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1920	ELSE
	1921	dopr_index(i) = 49
[87]	1922	dopr_unit(i) = 'kg/m3 m/s'
[1]	1923	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1924	ENDIF
	1925
	1926	CASE ( 'ws' )
	1927	IF ( .NOT. passive_scalar ) THEN
[215]	1928	message_string = 'data_output_pr = ' // &
	1929	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1930	'lemented for passive_scalar = .FALSE.'
[226]	1931	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1932	ELSE
	1933	dopr_index(i) = 50
[87]	1934	dopr_unit(i) = 'kg/m3 m/s'
[1]	1935	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1936	ENDIF
	1937
	1938	CASE ( 'w"qv"' )
[75]	1939	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1940	THEN
	1941	dopr_index(i) = 48
[87]	1942	dopr_unit(i) = 'kg/kg m/s'
[1]	1943	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1944	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1945	dopr_index(i) = 51
[87]	1946	dopr_unit(i) = 'kg/kg m/s'
[1]	1947	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	1948	ELSE
[215]	1949	message_string = 'data_output_pr = ' // &
	1950	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1951	'lemented for cloud_physics = .FALSE. an&' // &
	1952	'd humidity = .FALSE.'
[226]	1953	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1954	ENDIF
	1955
	1956	CASE ( 'wqv' )
[75]	1957	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1958	THEN
	1959	dopr_index(i) = 49
[87]	1960	dopr_unit(i) = 'kg/kg m/s'
[1]	1961	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1962	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1963	dopr_index(i) = 52
[87]	1964	dopr_unit(i) = 'kg/kg m/s'
[1]	1965	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	1966	ELSE
[215]	1967	message_string = 'data_output_pr = ' // &
	1968	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1969	'lemented for cloud_physics = .FALSE. an&' // &
	1970	'd humidity = .FALSE.'
[226]	1971	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1972	ENDIF
	1973
	1974	CASE ( 'wqv' )
[75]	1975	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1976	THEN
	1977	dopr_index(i) = 50
[87]	1978	dopr_unit(i) = 'kg/kg m/s'
[1]	1979	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1980	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1981	dopr_index(i) = 53
[87]	1982	dopr_unit(i) = 'kg/kg m/s'
[1]	1983	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	1984	ELSE
[215]	1985	message_string = 'data_output_pr = ' // &
	1986	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1987	'lemented for cloud_physics = .FALSE. an&' // &
	1988	'd humidity = .FALSE.'
[226]	1989	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1990	ENDIF
	1991
	1992	CASE ( 'ql' )
	1993	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	1994	message_string = 'data_output_pr = ' // &
	1995	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1996	'lemented for cloud_physics = .FALSE. or' // &
	1997	'&cloud_droplets = .FALSE.'
[226]	1998	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	1999	ELSE
	2000	dopr_index(i) = 54
[87]	2001	dopr_unit(i) = 'kg/kg'
[1]	2002	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2003	ENDIF
	2004
	2005	CASE ( 'wuu*/dz' )
	2006	dopr_index(i) = 55
[87]	2007	dopr_unit(i) = 'm2/s3'
[1]	2008	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2009
	2010	CASE ( 'wp/dz' )
	2011	dopr_index(i) = 56
[87]	2012	dopr_unit(i) = 'm2/s3'
[106]	2013	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2014
	2015	CASE ( 'w"e/dz' )
	2016	dopr_index(i) = 57
[87]	2017	dopr_unit(i) = 'm2/s3'
[1]	2018	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2019
	2020	CASE ( 'u"pt"' )
	2021	dopr_index(i) = 58
[87]	2022	dopr_unit(i) = 'K m/s'
[1]	2023	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2024
	2025	CASE ( 'upt' )
	2026	dopr_index(i) = 59
[87]	2027	dopr_unit(i) = 'K m/s'
[1]	2028	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2029
	2030	CASE ( 'upt_t' )
	2031	dopr_index(i) = 60
[87]	2032	dopr_unit(i) = 'K m/s'
[1]	2033	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2034
	2035	CASE ( 'v"pt"' )
	2036	dopr_index(i) = 61
[87]	2037	dopr_unit(i) = 'K m/s'
[1]	2038	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2039
	2040	CASE ( 'vpt' )
	2041	dopr_index(i) = 62
[87]	2042	dopr_unit(i) = 'K m/s'
[1]	2043	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2044
	2045	CASE ( 'vpt_t' )
	2046	dopr_index(i) = 63
[87]	2047	dopr_unit(i) = 'K m/s'
[1]	2048	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2049
[96]	2050	CASE ( 'rho' )
	2051	dopr_index(i) = 64
	2052	dopr_unit(i) = 'kg/m3'
	2053	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2054
[96]	2055	CASE ( 'w"sa"' )
	2056	IF ( .NOT. ocean ) THEN
[215]	2057	message_string = 'data_output_pr = ' // &
	2058	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2059	'lemented for ocean = .FALSE.'
[226]	2060	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2061	ELSE
	2062	dopr_index(i) = 65
	2063	dopr_unit(i) = 'psu m/s'
	2064	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2065	ENDIF
	2066
	2067	CASE ( 'wsa' )
	2068	IF ( .NOT. ocean ) THEN
[215]	2069	message_string = 'data_output_pr = ' // &
	2070	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2071	'lemented for ocean = .FALSE.'
[226]	2072	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2073	ELSE
	2074	dopr_index(i) = 66
	2075	dopr_unit(i) = 'psu m/s'
	2076	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2077	ENDIF
	2078
	2079	CASE ( 'wsa' )
	2080	IF ( .NOT. ocean ) THEN
[215]	2081	message_string = 'data_output_pr = ' // &
	2082	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2083	'lemented for ocean = .FALSE.'
[226]	2084	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2085	ELSE
	2086	dopr_index(i) = 67
	2087	dopr_unit(i) = 'psu m/s'
	2088	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2089	ENDIF
	2090
[106]	2091	CASE ( 'wp' )
	2092	dopr_index(i) = 68
	2093	dopr_unit(i) = 'm3/s3'
	2094	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2095
[106]	2096	CASE ( 'w"e' )
	2097	dopr_index(i) = 69
	2098	dopr_unit(i) = 'm3/s3'
	2099	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2100
[197]	2101	CASE ( 'q*2' )
	2102	IF ( .NOT. humidity ) THEN
[215]	2103	message_string = 'data_output_pr = ' // &
	2104	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2105	'lemented for humidity = .FALSE.'
[226]	2106	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2107	ELSE
	2108	dopr_index(i) = 70
	2109	dopr_unit(i) = 'kg2/kg2'
	2110	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2111	ENDIF
[106]	2112
[1]	2113	CASE DEFAULT
[87]	2114
	2115	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2116
	2117	IF ( unit == 'illegal' ) THEN
[215]	2118	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2119	message_string = 'illegal value for data_output_pr or ' // &
	2120	'data_output_pr_user = "' // &
	2121	TRIM( data_output_pr(i) ) // '"'
[226]	2122	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2123	ELSE
	2124	message_string = 'illegal value for data_output_pr = "' // &
	2125	TRIM( data_output_pr(i) ) // '"'
[226]	2126	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2127	ENDIF
[1]	2128	ENDIF
	2129
	2130	END SELECT
	2131	!
	2132	!-- Check to which of the predefined coordinate systems the profile belongs
	2133	DO k = 1, crmax
	2134	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2135	/=0 ) &
	2136	THEN
	2137	dopr_crossindex(i) = k
	2138	EXIT
	2139	ENDIF
	2140	ENDDO
	2141	!
	2142	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2143	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2144	!-- control characters
	2145	dopr_label(i) = data_output_pr(i)
	2146	position = INDEX( dopr_label(i) , '"' )
	2147	DO WHILE ( position /= 0 )
	2148	dopr_label(i)(position:position) = ''''
	2149	position = INDEX( dopr_label(i) , '"' )
	2150	ENDDO
	2151
	2152	ENDDO
	2153
	2154	!
	2155	!-- y-value range of the coordinate system (PROFIL).
	2156	!-- x-value range determined in plot_1d.
[94]	2157	IF ( .NOT. ocean ) THEN
	2158	cross_uymin = 0.0
	2159	IF ( z_max_do1d == -1.0 ) THEN
	2160	cross_uymax = zu(nzt+1)
	2161	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2162	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2163	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2164	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2165	ELSE
	2166	cross_uymax = z_max_do1d
	2167	ENDIF
[1]	2168	ENDIF
	2169
	2170	!
	2171	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2172	!-- permissible
	2173	DO i = 1, crmax
	2174	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2175
	2176	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2177	j = 0
	2178
	2179	CASE DEFAULT
[215]	2180	message_string = 'unknown normalization method cross_normali' // &
	2181	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2182	'"'
[226]	2183	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2184
	2185	END SELECT
	2186	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2187
	2188	CASE ( '', 'z_i' )
	2189	j = 0
	2190
	2191	CASE DEFAULT
[215]	2192	message_string = 'unknown normalization method cross_normali' // &
	2193	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2194	'"'
[226]	2195	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2196
	2197	END SELECT
	2198	ENDDO
	2199	!
	2200	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2201	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2202	THEN
[215]	2203	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2204	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2205	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2206	ENDIF
	2207
	2208
	2209	!
	2210	!-- Append user-defined data output variables to the standard data output
	2211	IF ( data_output_user(1) /= ' ' ) THEN
	2212	i = 1
	2213	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2214	i = i + 1
	2215	ENDDO
	2216	j = 1
	2217	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2218	IF ( i > 100 ) THEN
[215]	2219	message_string = 'number of output quantitities given by data' // &
	2220	'_output and data_output_user exceeds the limit of 100'
[226]	2221	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2222	ENDIF
	2223	data_output(i) = data_output_user(j)
	2224	i = i + 1
	2225	j = j + 1
	2226	ENDDO
	2227	ENDIF
	2228
	2229	!
	2230	!-- Check and set steering parameters for 2d/3d data output and averaging
	2231	i = 1
	2232	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2233	!
	2234	!-- Check for data averaging
	2235	ilen = LEN_TRIM( data_output(i) )
	2236	j = 0 ! no data averaging
	2237	IF ( ilen > 3 ) THEN
	2238	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2239	j = 1 ! data averaging
	2240	data_output(i) = data_output(i)(1:ilen-3)
	2241	ENDIF
	2242	ENDIF
	2243	!
	2244	!-- Check for cross section or volume data
	2245	ilen = LEN_TRIM( data_output(i) )
	2246	k = 0 ! 3d data
	2247	var = data_output(i)(1:ilen)
	2248	IF ( ilen > 3 ) THEN
	2249	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2250	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2251	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2252	k = 1 ! 2d data
	2253	var = data_output(i)(1:ilen-3)
	2254	ENDIF
	2255	ENDIF
	2256	!
	2257	!-- Check for allowed value and set units
	2258	SELECT CASE ( TRIM( var ) )
	2259
	2260	CASE ( 'e' )
	2261	IF ( constant_diffusion ) THEN
[215]	2262	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2263	'res constant_diffusion = .FALSE.'
[226]	2264	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2265	ENDIF
	2266	unit = 'm2/s2'
	2267
	2268	CASE ( 'pc', 'pr' )
	2269	IF ( .NOT. particle_advection ) THEN
[215]	2270	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2271	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2272	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2273	ENDIF
	2274	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2275	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2276
	2277	CASE ( 'q', 'vpt' )
[75]	2278	IF ( .NOT. humidity ) THEN
[215]	2279	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2280	'res humidity = .TRUE.'
[226]	2281	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2282	ENDIF
	2283	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2284	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2285
	2286	CASE ( 'ql' )
	2287	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2288	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2289	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2290	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2291	ENDIF
	2292	unit = 'kg/kg'
	2293
	2294	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2295	IF ( .NOT. cloud_droplets ) THEN
[215]	2296	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2297	'res cloud_droplets = .TRUE.'
[226]	2298	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2299	ENDIF
	2300	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2301	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2302	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2303
	2304	CASE ( 'qv' )
	2305	IF ( .NOT. cloud_physics ) THEN
[215]	2306	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2307	'res cloud_physics = .TRUE.'
[226]	2308	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2309	ENDIF
	2310	unit = 'kg/kg'
	2311
[96]	2312	CASE ( 'rho' )
	2313	IF ( .NOT. ocean ) THEN
[215]	2314	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2315	'res ocean = .TRUE.'
[226]	2316	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2317	ENDIF
	2318	unit = 'kg/m3'
	2319
[1]	2320	CASE ( 's' )
	2321	IF ( .NOT. passive_scalar ) THEN
[215]	2322	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2323	'res passive_scalar = .TRUE.'
[226]	2324	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2325	ENDIF
	2326	unit = 'conc'
	2327
[96]	2328	CASE ( 'sa' )
	2329	IF ( .NOT. ocean ) THEN
[215]	2330	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2331	'res ocean = .TRUE.'
[226]	2332	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2333	ENDIF
	2334	unit = 'psu'
	2335
[72]	2336	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
[1]	2337	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2338	message_string = 'illegal value for data_output: "' // &
	2339	TRIM( var ) // '" & only 2d-horizontal ' // &
	2340	'cross sections are allowed for this value'
[226]	2341	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2342	ENDIF
	2343	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2344	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2345	'res cloud_physics = .TRUE.'
[226]	2346	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2347	ENDIF
[72]	2348	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2349	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2350	'res precipitation = .TRUE.'
[226]	2351	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2352	ENDIF
	2353	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2354	message_string = 'temporal averaging of precipitation ' // &
	2355	'amount "' // TRIM( var ) // '" is not possible'
[226]	2356	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2357	ENDIF
	2358	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2359	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2360	'res precipitation = .TRUE.'
[226]	2361	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2362	ENDIF
	2363
	2364
[1]	2365	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2366	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2367	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
[72]	2368	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2369	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2370	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[1]	2371
	2372	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2373	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2374	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2375	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2376	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2377	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2378	CONTINUE
	2379
	2380	CASE DEFAULT
	2381	CALL user_check_data_output( var, unit )
	2382
	2383	IF ( unit == 'illegal' ) THEN
[215]	2384	IF ( data_output_user(1) /= ' ' ) THEN
	2385	message_string = 'illegal value for data_output or ' // &
	2386	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2387	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2388	ELSE
	2389	message_string = 'illegal value for data_output =' // &
	2390	TRIM( data_output(i) ) // '"'
[226]	2391	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2392	ENDIF
	2393	ENDIF
	2394
	2395	END SELECT
	2396	!
	2397	!-- Set the internal steering parameters appropriately
	2398	IF ( k == 0 ) THEN
	2399	do3d_no(j) = do3d_no(j) + 1
	2400	do3d(j,do3d_no(j)) = data_output(i)
	2401	do3d_unit(j,do3d_no(j)) = unit
	2402	ELSE
	2403	do2d_no(j) = do2d_no(j) + 1
	2404	do2d(j,do2d_no(j)) = data_output(i)
	2405	do2d_unit(j,do2d_no(j)) = unit
	2406	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2407	data_output_xy(j) = .TRUE.
	2408	ENDIF
	2409	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2410	data_output_xz(j) = .TRUE.
	2411	ENDIF
	2412	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2413	data_output_yz(j) = .TRUE.
	2414	ENDIF
	2415	ENDIF
	2416
	2417	IF ( j == 1 ) THEN
	2418	!
	2419	!-- Check, if variable is already subject to averaging
	2420	found = .FALSE.
	2421	DO k = 1, doav_n
	2422	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2423	ENDDO
	2424
	2425	IF ( .NOT. found ) THEN
	2426	doav_n = doav_n + 1
	2427	doav(doav_n) = var
	2428	ENDIF
	2429	ENDIF
	2430
	2431	i = i + 1
	2432	ENDDO
	2433
	2434	!
	2435	!-- Store sectional planes in one shared array
	2436	section(:,1) = section_xy
	2437	section(:,2) = section_xz
	2438	section(:,3) = section_yz
	2439
	2440	!
	2441	!-- Upper plot limit (grid point value) for 1D profiles
	2442	IF ( z_max_do1d == -1.0 ) THEN
	2443	nz_do1d = nzt+1
	2444	ELSE
	2445	DO k = nzb+1, nzt+1
	2446	nz_do1d = k
	2447	IF ( zw(k) > z_max_do1d ) EXIT
	2448	ENDDO
	2449	ENDIF
	2450
	2451	!
	2452	!-- Upper plot limit for 2D vertical sections
	2453	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2454	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2455	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2456	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2457	' (zu(nzt))'
[226]	2458	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2459	ENDIF
	2460
	2461	!
	2462	!-- Upper plot limit for 3D arrays
	2463	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2464
	2465	!
	2466	!-- Determine and check accuracy for compressed 3D plot output
	2467	IF ( do3d_compress ) THEN
	2468	!
	2469	!-- Compression only permissible on T3E machines
	2470	IF ( host(1:3) /= 't3e' ) THEN
[215]	2471	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2472	TRIM( host ) // '"'
[226]	2473	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2474	ENDIF
	2475
	2476	i = 1
	2477	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2478
	2479	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2480	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2481	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2482	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2483	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2484	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2485	ENDIF
	2486
	2487	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2488	var = do3d_comp_prec(i)(1:ilen-1)
	2489
	2490	SELECT CASE ( var )
	2491
	2492	CASE ( 'u' )
	2493	j = 1
	2494	CASE ( 'v' )
	2495	j = 2
	2496	CASE ( 'w' )
	2497	j = 3
	2498	CASE ( 'p' )
	2499	j = 4
	2500	CASE ( 'pt' )
	2501	j = 5
	2502
	2503	CASE DEFAULT
[215]	2504	WRITE( message_string, * ) 'unknown variable "', &
	2505	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2506	i, ')'
[226]	2507	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2508
	2509	END SELECT
	2510
	2511	plot_3d_precision(j)%precision = prec
	2512	i = i + 1
	2513
	2514	ENDDO
	2515	ENDIF
	2516
	2517	!
	2518	!-- Check the data output format(s)
	2519	IF ( data_output_format(1) == ' ' ) THEN
	2520	!
	2521	!-- Default value
	2522	netcdf_output = .TRUE.
	2523	ELSE
	2524	i = 1
	2525	DO WHILE ( data_output_format(i) /= ' ' )
	2526
	2527	SELECT CASE ( data_output_format(i) )
	2528
	2529	CASE ( 'netcdf' )
	2530	netcdf_output = .TRUE.
	2531	CASE ( 'iso2d' )
	2532	iso2d_output = .TRUE.
	2533	CASE ( 'profil' )
	2534	profil_output = .TRUE.
	2535	CASE ( 'avs' )
	2536	avs_output = .TRUE.
	2537
	2538	CASE DEFAULT
[215]	2539	message_string = 'unknown value for data_output_format "' // &
	2540	TRIM( data_output_format(i) ) // '"'
[226]	2541	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2542
	2543	END SELECT
	2544
	2545	i = i + 1
	2546	IF ( i > 10 ) EXIT
	2547
	2548	ENDDO
	2549
	2550	ENDIF
	2551
	2552	!
	2553	!-- Check netcdf precison
	2554	ldum = .FALSE.
	2555	CALL define_netcdf_header( 'ch', ldum, 0 )
	2556
	2557	!
	2558	!-- Check, whether a constant diffusion coefficient shall be used
	2559	IF ( km_constant /= -1.0 ) THEN
	2560	IF ( km_constant < 0.0 ) THEN
[215]	2561	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2562	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2563	ELSE
	2564	IF ( prandtl_number < 0.0 ) THEN
[215]	2565	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2566	' < 0.0'
[226]	2567	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2568	ENDIF
	2569	constant_diffusion = .TRUE.
	2570
	2571	IF ( prandtl_layer ) THEN
[215]	2572	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2573	'value of km'
[226]	2574	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2575	ENDIF
	2576	ENDIF
	2577	ENDIF
	2578
	2579	!
	2580	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2581	!-- for the horizontal diffusivity used within the outflow damping layer,
	2582	!-- and check/set the width of the damping layer
	2583	IF ( bc_lr /= 'cyclic' ) THEN
	2584	IF ( km_damp_max == -1.0 ) THEN
	2585	km_damp_max = 0.5 * dx
	2586	ENDIF
	2587	IF ( outflow_damping_width == -1.0 ) THEN
	2588	outflow_damping_width = MIN( 20, nx/2 )
	2589	ENDIF
	2590	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2591	message_string = 'outflow_damping width out of range'
[226]	2592	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2593	ENDIF
	2594	ENDIF
	2595
	2596	IF ( bc_ns /= 'cyclic' ) THEN
	2597	IF ( km_damp_max == -1.0 ) THEN
	2598	km_damp_max = 0.5 * dy
	2599	ENDIF
	2600	IF ( outflow_damping_width == -1.0 ) THEN
	2601	outflow_damping_width = MIN( 20, ny/2 )
	2602	ENDIF
	2603	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2604	message_string = 'outflow_damping width out of range'
[226]	2605	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2606	ENDIF
	2607	ENDIF
	2608
	2609	!
	2610	!-- Check value range for rif
	2611	IF ( rif_min >= rif_max ) THEN
[215]	2612	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2613	'than rif_max = ', rif_max
[226]	2614	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2615	ENDIF
	2616
	2617	!
	2618	!-- Determine upper and lower hight level indices for random perturbations
[97]	2619	IF ( disturbance_level_b == -9999999.9 ) THEN
	2620	IF ( ocean ) THEN
	2621	disturbance_level_b = zu((nzt*2)/3)
	2622	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2623	ELSE
	2624	disturbance_level_b = zu(nzb+3)
	2625	disturbance_level_ind_b = nzb + 3
	2626	ENDIF
[1]	2627	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2628	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2629	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2630	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2631	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2632	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2633	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2634	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2635	ELSE
	2636	DO k = 3, nzt-2
	2637	IF ( disturbance_level_b <= zu(k) ) THEN
	2638	disturbance_level_ind_b = k
	2639	EXIT
	2640	ENDIF
	2641	ENDDO
	2642	ENDIF
	2643
[97]	2644	IF ( disturbance_level_t == -9999999.9 ) THEN
	2645	IF ( ocean ) THEN
	2646	disturbance_level_t = zu(nzt-3)
	2647	disturbance_level_ind_t = nzt - 3
	2648	ELSE
	2649	disturbance_level_t = zu(nzt/3)
	2650	disturbance_level_ind_t = nzt / 3
	2651	ENDIF
[1]	2652	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2653	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2654	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2655	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2656	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2657	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2658	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2659	disturbance_level_b
[226]	2660	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2661	ELSE
	2662	DO k = 3, nzt-2
	2663	IF ( disturbance_level_t <= zu(k) ) THEN
	2664	disturbance_level_ind_t = k
	2665	EXIT
	2666	ENDIF
	2667	ENDDO
	2668	ENDIF
	2669
	2670	!
	2671	!-- Check again whether the levels determined this way are ok.
	2672	!-- Error may occur at automatic determination and too few grid points in
	2673	!-- z-direction.
	2674	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2675	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2676	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2677	disturbance_level_b
[226]	2678	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2679	ENDIF
	2680
	2681	!
	2682	!-- Determine the horizontal index range for random perturbations.
	2683	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2684	!-- near the inflow and the perturbation area is further limited to ...(1)
	2685	!-- after the initial phase of the flow.
	2686	dist_nxl = 0; dist_nxr = nx
	2687	dist_nys = 0; dist_nyn = ny
	2688	IF ( bc_lr /= 'cyclic' ) THEN
	2689	IF ( inflow_disturbance_begin == -1 ) THEN
	2690	inflow_disturbance_begin = MIN( 10, nx/2 )
	2691	ENDIF
	2692	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2693	THEN
[215]	2694	message_string = 'inflow_disturbance_begin out of range'
[226]	2695	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2696	ENDIF
	2697	IF ( inflow_disturbance_end == -1 ) THEN
	2698	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2699	ENDIF
	2700	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2701	THEN
[215]	2702	message_string = 'inflow_disturbance_end out of range'
[226]	2703	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2704	ENDIF
	2705	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2706	IF ( inflow_disturbance_begin == -1 ) THEN
	2707	inflow_disturbance_begin = MIN( 10, ny/2 )
	2708	ENDIF
	2709	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2710	THEN
[215]	2711	message_string = 'inflow_disturbance_begin out of range'
[226]	2712	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2713	ENDIF
	2714	IF ( inflow_disturbance_end == -1 ) THEN
	2715	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2716	ENDIF
	2717	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2718	THEN
[215]	2719	message_string = 'inflow_disturbance_end out of range'
[226]	2720	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2721	ENDIF
	2722	ENDIF
	2723
[73]	2724	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2725	dist_nxr = nx - inflow_disturbance_begin
	2726	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2727	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2728	dist_nxl = inflow_disturbance_begin
	2729	dist_nxr(1) = inflow_disturbance_end
[73]	2730	ENDIF
	2731	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2732	dist_nyn = ny - inflow_disturbance_begin
	2733	dist_nys(1) = ny - inflow_disturbance_end
[73]	2734	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2735	dist_nys = inflow_disturbance_begin
	2736	dist_nyn(1) = inflow_disturbance_end
	2737	ENDIF
	2738
	2739	!
[151]	2740	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2741	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2742	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2743	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2744	'condition at the inflow boundary'
[226]	2745	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2746	ENDIF
	2747
	2748	!
	2749	!-- In case of turbulent inflow calculate the index of the recycling plane
	2750	IF ( turbulent_inflow ) THEN
	2751	IF ( recycling_width == 9999999.9 ) THEN
	2752	!
	2753	!-- Set the default value for the width of the recycling domain
	2754	recycling_width = 0.1 * nx * dx
	2755	ELSE
	2756	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2757	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2758	' ', recycling_width
[226]	2759	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	2760	ENDIF
	2761	ENDIF
	2762	!
	2763	!-- Calculate the index
	2764	recycling_plane = recycling_width / dx
	2765	ENDIF
	2766
	2767	!
[1]	2768	!-- Check random generator
	2769	IF ( random_generator /= 'system-specific' .AND. &
	2770	random_generator /= 'numerical-recipes' ) THEN
[215]	2771	message_string = 'unknown random generator: random_generator = "' // &
	2772	TRIM( random_generator ) // '"'
[226]	2773	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2774	ENDIF
	2775
	2776	!
	2777	!-- Determine damping level index for 1D model
	2778	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2779	IF ( damp_level_1d == -1.0 ) THEN
	2780	damp_level_1d = zu(nzt+1)
	2781	damp_level_ind_1d = nzt + 1
	2782	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2783	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2784	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	2785	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	2786	ELSE
	2787	DO k = 1, nzt+1
	2788	IF ( damp_level_1d <= zu(k) ) THEN
	2789	damp_level_ind_1d = k
	2790	EXIT
	2791	ENDIF
	2792	ENDDO
	2793	ENDIF
	2794	ENDIF
[215]	2795
[1]	2796	!
	2797	!-- Check some other 1d-model parameters
	2798	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2799	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2800	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2801	'" is unknown'
[226]	2802	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2803	ENDIF
	2804	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2805	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2806	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2807	'" is unknown'
[226]	2808	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2809	ENDIF
	2810
	2811	!
	2812	!-- Set time for the next user defined restart (time_restart is the
	2813	!-- internal parameter for steering restart events)
	2814	IF ( restart_time /= 9999999.9 ) THEN
	2815	IF ( restart_time > simulated_time ) time_restart = restart_time
	2816	ELSE
	2817	!
	2818	!-- In case of a restart run, set internal parameter to default (no restart)
	2819	!-- if the NAMELIST-parameter restart_time is omitted
	2820	time_restart = 9999999.9
	2821	ENDIF
	2822
	2823	!
	2824	!-- Set default value of the time needed to terminate a model run
	2825	IF ( termination_time_needed == -1.0 ) THEN
	2826	IF ( host(1:3) == 'ibm' ) THEN
	2827	termination_time_needed = 300.0
	2828	ELSE
	2829	termination_time_needed = 35.0
	2830	ENDIF
	2831	ENDIF
	2832
	2833	!
	2834	!-- Check the time needed to terminate a model run
	2835	IF ( host(1:3) == 't3e' ) THEN
	2836	!
	2837	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2838	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2839	IF ( termination_time_needed <= 30.0 ) THEN
[215]	2840	WRITE( message_string, * ) 'termination_time_needed = ', &
	2841	termination_time_needed, ' must be > 30.0 on host "', &
	2842	TRIM( host ), '"'
[226]	2843	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	2844	ENDIF
	2845	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2846	!
	2847	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2848	!-- because the job time consumed before executing palm (for compiling,
	2849	!-- copying of files, etc.) has to be regarded
	2850	IF ( termination_time_needed < 300.0 ) THEN
[215]	2851	WRITE( message_string, * ) 'termination_time_needed = ', &
	2852	termination_time_needed, ' should be >= 300.0 on host "', &
	2853	TRIM( host ), '"'
[226]	2854	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	2855	ENDIF
	2856	ENDIF
	2857
[217]	2858	!
[240]	2859	!-- Check pressure gradient conditions
	2860	IF ( dp_external .AND. conserve_volume_flow ) THEN
	2861	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
	2862	' are .TRUE. but one of them must be .FALSE.'
	2863	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	2864	ENDIF
	2865	IF ( dp_external ) THEN
	2866	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	2867	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	2868	' of range'
	2869	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	2870	ENDIF
	2871	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
	2872	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
	2873	', i.e. the external pressure gradient & will not be applied'
	2874	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	2875	ENDIF
	2876	ENDIF
	2877	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	2878	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	2879	'.FALSE., i.e. the external pressure gradient & will not be applied'
	2880	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	2881	ENDIF
[241]	2882	IF ( conserve_volume_flow ) THEN
	2883	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
	2884	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	2885	conserve_volume_flow_mode = 'inflow_profile'
	2886	ELSE
	2887	conserve_volume_flow_mode = 'initial_profiles'
	2888	ENDIF
	2889	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	2890	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	2891	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	2892	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	2893	conserve_volume_flow_mode
	2894	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	2895	ENDIF
	2896	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
	2897	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
	2898	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
	2899	'require & conserve_volume_flow_mode = ''inflow_profile'''
	2900	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	2901	ENDIF
	2902	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	2903	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	2904	WRITE( message_string, * ) 'cyclic boundary conditions ', &
	2905	'require & conserve_volume_flow_mode = ''initial_profiles''', &
	2906	' or ''bulk_velocity'''
	2907	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	2908	ENDIF
	2909	ENDIF
	2910	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	2911	( .NOT. conserve_volume_flow .OR. &
	2912	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	2913	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
	2914	'conserve_volume_flow = .T. and & ', &
	2915	'conserve_volume_flow_mode = ''bulk_velocity'''
	2916	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	2917	ENDIF
[240]	2918
	2919	!
[264]	2920	!-- Check particle attributes
	2921	IF ( particle_color /= 'none' ) THEN
	2922	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	2923	particle_color /= 'z' ) THEN
	2924	message_string = 'illegal value for parameter particle_color: ' // &
	2925	TRIM( particle_color)
	2926	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	2927	ELSE
	2928	IF ( color_interval(2) <= color_interval(1) ) THEN
	2929	message_string = 'color_interval(2) <= color_interval(1)'
	2930	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	2931	ENDIF
	2932	ENDIF
	2933	ENDIF
	2934
	2935	IF ( particle_dvrpsize /= 'none' ) THEN
	2936	IF ( particle_dvrpsize /= 'absw' ) THEN
	2937	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	2938	' ' // TRIM( particle_color)
	2939	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	2940	ELSE
	2941	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	2942	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	2943	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	2944	ENDIF
	2945	ENDIF
	2946	ENDIF
	2947
	2948	!
[217]	2949	!-- Check &userpar parameters
	2950	CALL user_check_parameters
[1]	2951
[217]	2952
[1]	2953	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |