Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 260

Last change on this file since 260 was 256, checked in by letzel, 16 years ago
topography_grid_convention moved from userpar to inipar documentation and examples updated
Property svn:keywords set to `Id`
File size: 114.3 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[232]	6	! Bugfix: pressure included for profile output
[240]	7	! Check pressure gradient conditions
[256]	8	! topography_grid_convention moved from user_check_parameters
	9	! 'single_street_canyon'
[226]	10	!
	11	! Former revisions:
	12	! -----------------
	13	! $Id: check_parameters.f90 256 2009-03-08 08:56:27Z raasch $
	14	!
	15	! 222 2009-01-12 16:04:16Z letzel
[217]	16	! +user_check_parameters
[213]	17	! Output of messages replaced by message handling routine.
[206]	18	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	19	! deleted __mpi2 directives
[222]	20	! Check that PALM is called with mrun -K parallel for coupling
[198]	21	!
	22	! 197 2008-09-16 15:29:03Z raasch
[177]	23	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	24	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	25	!
	26	! Strict grid matching along z is not needed for mg-solver.
[153]	27	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	28	! Case of reading data for recycling included in initializing_actions,
[197]	29	! check of turbulent_inflow and calculation of recycling_plane.
	30	! q*2 profile added
[139]	31	!
	32	! 138 2007-11-28 10:03:58Z letzel
[138]	33	! Plant canopy added
[132]	34	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	35	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	36	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	37	!
	38	! 109 2007-08-28 15:26:47Z letzel
[102]	39	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	40	! conditions for temperature and fluxes) in case of coupled runs.
	41	! +profiles for wp and w"e
[104]	42	! Bugfix: Error message concerning output of particle concentration (pc)
	43	! modified
[108]	44	! More checks and more default values for coupled runs
	45	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	46	! cloud_physics = .T.)
	47	! Rayleigh damping for ocean fixed.
[109]	48	! Check and, if necessary, set default value for dt_coupling
[98]	49	!
	50	! 97 2007-06-21 08:23:15Z raasch
[97]	51	! Initial salinity profile is calculated, salinity boundary conditions are
	52	! checked,
[94]	53	! z_max_do1d is checked only in case of ocean = .f.,
[97]	54	! +initial temperature and geostrophic velocity profiles for the ocean version,
	55	! use_pt_reference renamed use_reference
[77]	56	!
[90]	57	! 89 2007-05-25 12:08:31Z raasch
	58	! Check for user-defined profiles
	59	!
[77]	60	! 75 2007-03-22 09:54:05Z raasch
[51]	61	! "by_user" allowed as initializing action, -data_output_ts,
[63]	62	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	63	! and pt_reference are checked, moisture renamed humidity,
[72]	64	! output of precipitation amount/rate and roughnes length + check
[73]	65	! possible negative humidities are avoided in initial profile,
[75]	66	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	67	! revision added to run_description_header
[1]	68	!
[39]	69	! 20 2007-02-26 00:12:32Z raasch
	70	! Temperature and humidity gradients at top are now calculated for nzt+1,
	71	! top_heatflux and respective boundary condition bc_pt_t is checked
	72	!
[3]	73	! RCS Log replace by Id keyword, revision history cleaned up
	74	!
[1]	75	! Revision 1.61 2006/08/04 14:20:25 raasch
	76	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	77	! use_upstream_for_tke, default value for dt_dopts,
	78	! generation of file header moved from routines palm and header to here
	79	!
	80	! Revision 1.1 1997/08/26 06:29:23 raasch
	81	! Initial revision
	82	!
	83	!
	84	! Description:
	85	! ------------
	86	! Check control parameters and deduce further quantities.
	87	!------------------------------------------------------------------------------!
	88
	89	USE arrays_3d
	90	USE constants
	91	USE control_parameters
	92	USE grid_variables
	93	USE indices
	94	USE model_1d
	95	USE netcdf_control
	96	USE particle_attributes
	97	USE pegrid
	98	USE profil_parameter
	99	USE statistics
	100	USE transpose_indices
	101
	102	IMPLICIT NONE
	103
	104	CHARACTER (LEN=1) :: sq
	105	CHARACTER (LEN=6) :: var
	106	CHARACTER (LEN=7) :: unit
	107	CHARACTER (LEN=8) :: date
	108	CHARACTER (LEN=10) :: time
[102]	109	CHARACTER (LEN=40) :: coupling_string
[1]	110	CHARACTER (LEN=100) :: action
	111
[108]	112	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	113	position, prec
[1]	114	LOGICAL :: found, ldum
[108]	115	REAL :: gradient, maxn, maxp, remote = 0.0
[1]	116
	117	!
	118	!-- Warning, if host is not set
	119	IF ( host(1:1) == ' ' ) THEN
[213]	120	message_string = '"host" is not set. Please check that environment ' // &
	121	'variable "localhost" & is set before running PALM'
[226]	122	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	123	ENDIF
	124
	125	!
[102]	126	!-- Check the coupling mode
	127	IF ( coupling_mode /= 'uncoupled' .AND. &
	128	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	129	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	130	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	131	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	132	ENDIF
	133
	134	!
[108]	135	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	136	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	137
[108]	138	IF ( dt_coupling == 9999999.9 ) THEN
[213]	139	message_string = 'dt_coupling is not set but required for coup' // &
	140	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	141	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	142	ENDIF
[213]	143
[206]	144	#if defined( __parallel )
	145	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	146	ierr )
	147	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	148	status, ierr )
[108]	149	IF ( dt_coupling /= remote ) THEN
[213]	150	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	151	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	152	'dt_coupling_remote = ', remote
[226]	153	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	154	ENDIF
[109]	155	IF ( dt_coupling <= 0.0 ) THEN
[206]	156	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	157	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	158	status, ierr )
[109]	159	dt_coupling = MAX( dt_max, remote )
[213]	160	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	161	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	162	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	163	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	164	ENDIF
[213]	165
[206]	166	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	167	ierr )
	168	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	169	status, ierr )
[108]	170	IF ( restart_time /= remote ) THEN
[213]	171	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	172	'": restart_time = ', restart_time, '& is not equal to ', &
	173	'restart_time_remote = ', remote
[226]	174	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	175	ENDIF
[213]	176
[206]	177	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	178	ierr )
	179	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	180	status, ierr )
[108]	181	IF ( dt_restart /= remote ) THEN
[213]	182	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	183	'": dt_restart = ', dt_restart, '& is not equal to ', &
	184	'dt_restart_remote = ', remote
[226]	185	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	186	ENDIF
[213]	187
[206]	188	CALL MPI_SEND( end_time, 1, MPI_REAL, target_id, 14, comm_inter, ierr )
	189	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	190	status, ierr )
[108]	191	IF ( end_time /= remote ) THEN
[213]	192	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	193	'": end_time = ', end_time, '& is not equal to ', &
	194	'end_time_remote = ', remote
[226]	195	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	196	ENDIF
[213]	197
[206]	198	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	199	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	200	status, ierr )
[108]	201	IF ( dx /= remote ) THEN
[213]	202	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	203	'": dx = ', dx, '& is not equal to dx_remote = ', remote
[226]	204	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
[108]	205	ENDIF
[213]	206
[206]	207	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	208	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	209	status, ierr )
[108]	210	IF ( dy /= remote ) THEN
[213]	211	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	212	'": dy = ', dy, '& is not equal to dy_remote = ', remote
[226]	213	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
[108]	214	ENDIF
[213]	215
[206]	216	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	217	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	218	status, ierr )
[108]	219	IF ( nx /= iremote ) THEN
[213]	220	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	221	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
[226]	222	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
[108]	223	ENDIF
[213]	224
[206]	225	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	226	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	227	status, ierr )
[108]	228	IF ( ny /= iremote ) THEN
[213]	229	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	230	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
[226]	231	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
[108]	232	ENDIF
[222]	233	#else
	234	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	235	' ''mrun -K parallel'''
[226]	236	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	237	#endif
	238	ENDIF
	239
[206]	240	#if defined( __parallel )
[108]	241	!
	242	!-- Exchange via intercommunicator
	243	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	244	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	245	ierr )
[108]	246	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	247	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	248	comm_inter, status, ierr )
[108]	249	ENDIF
	250	#endif
	251
	252
	253	!
[1]	254	!-- Generate the file header which is used as a header for most of PALM's
	255	!-- output files
	256	CALL DATE_AND_TIME( date, time )
	257	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	258	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	259	IF ( coupling_mode == 'uncoupled' ) THEN
	260	coupling_string = ''
	261	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	262	coupling_string = ' coupled (atmosphere)'
	263	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	264	coupling_string = ' coupled (ocean)'
	265	ENDIF
[1]	266
[102]	267	WRITE ( run_description_header, &
	268	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	269	TRIM( version ), TRIM( revision ), 'run: ', &
	270	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	271	'host: ', TRIM( host ), run_date, run_time
[1]	272
	273	!
[63]	274	!-- Check the general loop optimization method
	275	IF ( loop_optimization == 'default' ) THEN
	276	IF ( host(1:3) == 'nec' ) THEN
	277	loop_optimization = 'vector'
	278	ELSE
	279	loop_optimization = 'cache'
	280	ENDIF
	281	ENDIF
	282	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	283	.AND. loop_optimization /= 'vector' ) THEN
[213]	284	message_string = 'illegal value given for loop_optimization: "' // &
	285	TRIM( loop_optimization ) // '"'
[226]	286	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	287	ENDIF
	288
	289	!
[1]	290	!-- Check topography setting (check for illegal parameter combinations)
	291	IF ( topography /= 'flat' ) THEN
	292	action = ' '
	293	IF ( scalar_advec /= 'pw-scheme' ) THEN
	294	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	295	ENDIF
	296	IF ( momentum_advec /= 'pw-scheme' ) THEN
	297	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	298	ENDIF
[51]	299	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	300	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	301	ENDIF
[114]	302	IF ( psolver == 'sor' ) THEN
[1]	303	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	304	ENDIF
	305	IF ( sloping_surface ) THEN
	306	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	307	ENDIF
	308	IF ( galilei_transformation ) THEN
	309	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	310	ENDIF
	311	IF ( cloud_physics ) THEN
	312	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	313	ENDIF
	314	IF ( cloud_droplets ) THEN
	315	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	316	ENDIF
[75]	317	IF ( humidity ) THEN
	318	WRITE( action, '(A)' ) 'humidity = .TRUE.'
[1]	319	ENDIF
	320	IF ( .NOT. prandtl_layer ) THEN
	321	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	322	ENDIF
	323	IF ( action /= ' ' ) THEN
[213]	324	message_string = 'a non-flat topography does not allow ' // &
	325	TRIM( action )
[226]	326	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	327	ENDIF
[256]	328	!
	329	!-- In case of non-flat topography, check whether the convention how to
	330	!-- define the topography grid has been set correctly, or whether the default
	331	!-- is applicable. If this is not possible, abort.
	332	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	333	IF ( TRIM( topography ) /= 'single_building' .AND. &
	334	TRIM( topography ) /= 'single_street_canyon' .AND. &
	335	TRIM( topography ) /= 'read_from_file' ) THEN
	336	!-- The default value is not applicable here, because it is only valid
	337	!-- for the two standard cases 'single_building' and 'read_from_file'
	338	!-- defined in init_grid.
	339	WRITE( message_string, * ) &
	340	'The value for "topography_grid_convention" ', &
	341	'is not set. Its default value is & only valid for ', &
	342	'"topography" = ''single_building'', ', &
	343	'''single_street_canyon'' & or ''read_from_file''.', &
	344	' & Choose ''cell_edge'' or ''cell_center''.'
	345	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	346	ELSE
	347	!-- The default value is applicable here.
	348	!-- Set convention according to topography.
	349	IF ( TRIM( topography ) == 'single_building' .OR. &
	350	TRIM( topography ) == 'single_street_canyon' ) THEN
	351	topography_grid_convention = 'cell_edge'
	352	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	353	topography_grid_convention = 'cell_center'
	354	ENDIF
	355	ENDIF
	356	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	357	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	358	WRITE( message_string, * ) &
	359	'The value for "topography_grid_convention" is ', &
	360	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	361	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	362	ENDIF
	363
[1]	364	ENDIF
[94]	365
[1]	366	!
[94]	367	!-- Check ocean setting
	368	IF ( ocean ) THEN
	369	action = ' '
	370	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	371	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	372	ENDIF
[97]	373	IF ( momentum_advec == 'ups-scheme' ) THEN
	374	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	375	ENDIF
[94]	376	IF ( action /= ' ' ) THEN
[213]	377	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	378	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	379	ENDIF
	380	ENDIF
	381
	382	!
[1]	383	!-- Check whether there are any illegal values
	384	!-- Pressure solver:
	385	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	386	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	387	message_string = 'unknown solver for perturbation pressure: psolver' // &
	388	' = "' // TRIM( psolver ) // '"'
[226]	389	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	390	ENDIF
	391
	392	#if defined( __parallel )
	393	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	394	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	395	'for a 1d domain-decomposition along x & please do' // &
	396	' not set npey/=1 in the parameter file'
[226]	397	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	398	ENDIF
[181]	399	IF ( psolver == 'poisfft_hybrid' .AND. &
	400	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	401	psolver == 'multigrid' .AND. &
	402	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	403	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	404	'work for subdomains with unequal size & please ' // &
	405	'set grid_matching = ''strict'' in the parameter file'
[226]	406	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	407	ENDIF
	408	#else
	409	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	410	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	411	' for a parallel environment'
[226]	412	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	413	ENDIF
	414	#endif
	415
	416	IF ( psolver == 'multigrid' ) THEN
	417	IF ( cycle_mg == 'w' ) THEN
	418	gamma_mg = 2
	419	ELSEIF ( cycle_mg == 'v' ) THEN
	420	gamma_mg = 1
	421	ELSE
[213]	422	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	423	TRIM( cycle_mg ) // '"'
[226]	424	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	425	ENDIF
	426	ENDIF
	427
	428	IF ( fft_method /= 'singleton-algorithm' .AND. &
	429	fft_method /= 'temperton-algorithm' .AND. &
	430	fft_method /= 'system-specific' ) THEN
[213]	431	message_string = 'unknown fft-algorithm: fft_method = "' // &
	432	TRIM( fft_method ) // '"'
[226]	433	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	434	ENDIF
	435
	436	!
	437	!-- Advection schemes:
	438	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	439	THEN
[214]	440	message_string = 'unknown advection scheme: momentum_advec = "' // &
	441	TRIM( momentum_advec ) // '"'
[226]	442	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	443	ENDIF
	444	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	445	.AND. timestep_scheme /= 'euler' ) THEN
[214]	446	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	447	'" is not allowed with timestep_scheme = "' // &
	448	TRIM( timestep_scheme ) // '"'
[226]	449	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	450	ENDIF
	451
	452	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	453	scalar_advec /= 'ups-scheme' ) THEN
[214]	454	message_string = 'unknown advection scheme: scalar_advec = "' // &
	455	TRIM( scalar_advec ) // '"'
[226]	456	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	457	ENDIF
	458
	459	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	460	use_upstream_for_tke = .TRUE.
[214]	461	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	462	'use_sgs_for_particles = .TRUE.'
[226]	463	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	464	ENDIF
	465
	466	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	467	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	468	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	469	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	470	ENDIF
	471
	472	!
	473	!-- Timestep schemes:
	474	SELECT CASE ( TRIM( timestep_scheme ) )
	475
	476	CASE ( 'euler' )
	477	intermediate_timestep_count_max = 1
	478	asselin_filter_factor = 0.0
	479
	480	CASE ( 'leapfrog', 'leapfrog+euler' )
	481	intermediate_timestep_count_max = 1
	482
	483	CASE ( 'runge-kutta-2' )
	484	intermediate_timestep_count_max = 2
	485	asselin_filter_factor = 0.0
	486
	487	CASE ( 'runge-kutta-3' )
	488	intermediate_timestep_count_max = 3
	489	asselin_filter_factor = 0.0
	490
	491	CASE DEFAULT
[214]	492	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	493	TRIM( timestep_scheme ) // '"'
[226]	494	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	495
	496	END SELECT
	497
[63]	498	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	499	THEN
[214]	500	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	501	'" & does not work with timestep_scheme "' // &
	502	TRIM( timestep_scheme ) // '"'
[226]	503	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	504	ENDIF
	505
	506	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	507	THEN
[214]	508	message_string = 'momentum advection scheme "' // &
	509	TRIM( momentum_advec ) // '" & does not work with ' // &
	510	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	511	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	512	ENDIF
	513
[147]	514	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	515	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
[1]	516	!
[214]	517	!-- No restart run: several initialising actions are possible
[1]	518	action = initializing_actions
	519	DO WHILE ( TRIM( action ) /= '' )
	520	position = INDEX( action, ' ' )
	521	SELECT CASE ( action(1:position-1) )
	522
	523	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	524	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	525	action = action(position+1:)
	526
	527	CASE DEFAULT
[214]	528	message_string = 'initializing_action = "' // &
	529	TRIM( action ) // '" unkown or not allowed'
[226]	530	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	531
	532	END SELECT
	533	ENDDO
	534	ENDIF
[214]	535
[1]	536	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	537	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	538	message_string = 'initializing_actions = "set_constant_profiles"' // &
	539	' and "set_1d-model_profiles" are not allowed ' // &
	540	'simultaneously'
[226]	541	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	542	ENDIF
[214]	543
[46]	544	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	545	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	546	message_string = 'initializing_actions = "set_constant_profiles"' // &
	547	' and "by_user" are not allowed simultaneously'
[226]	548	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	549	ENDIF
[214]	550
[46]	551	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	552	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	553	message_string = 'initializing_actions = "by_user" and ' // &
	554	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	555	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	556	ENDIF
[1]	557
[75]	558	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	559	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	560	'not allowed with humidity = ', humidity
[226]	561	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	562	ENDIF
	563
[72]	564	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	565	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	566	'not allowed with cloud_physics = ', cloud_physics
[226]	567	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	568	ENDIF
	569
[75]	570	IF ( humidity .AND. sloping_surface ) THEN
[214]	571	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	572	'are not allowed simultaneously'
[226]	573	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	574	ENDIF
	575
[75]	576	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	577	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	578	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	579	ENDIF
	580
[75]	581	IF ( passive_scalar .AND. humidity ) THEN
[214]	582	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	583	'is not allowed simultaneously'
[226]	584	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	585	ENDIF
	586
	587	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	588	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	589	' = .TRUE.'
[226]	590	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	591	ENDIF
	592
	593	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	594	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	595	'" found for parameter grid_matching'
[226]	596	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	597	ENDIF
	598
[138]	599	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	600	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	601	'coefficient & given value is drag_coefficient = 0.0'
[226]	602	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	603	ENDIF
	604
[1]	605	!
	606	!-- In case of no model continuation run, check initialising parameters and
	607	!-- deduce further quantities
	608	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	609
	610	!
	611	!-- Initial profiles for 1D and 3D model, respectively
	612	u_init = ug_surface
	613	v_init = vg_surface
	614	pt_init = pt_surface
[94]	615	IF ( humidity ) q_init = q_surface
	616	IF ( ocean ) sa_init = sa_surface
	617	IF ( passive_scalar ) q_init = s_surface
[138]	618	IF ( plant_canopy ) lad = 0.0
[1]	619
	620	!
	621	!--
	622	!-- If required, compute initial profile of the geostrophic wind
	623	!-- (component ug)
	624	i = 1
	625	gradient = 0.0
[97]	626
	627	IF ( .NOT. ocean ) THEN
	628
	629	ug_vertical_gradient_level_ind(1) = 0
	630	ug(0) = ug_surface
	631	DO k = 1, nzt+1
[177]	632	IF ( i < 11 ) THEN
	633	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	634	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	635	gradient = ug_vertical_gradient(i) / 100.0
	636	ug_vertical_gradient_level_ind(i) = k - 1
	637	i = i + 1
[1]	638	ENDIF
[177]	639	ENDIF
[97]	640	IF ( gradient /= 0.0 ) THEN
	641	IF ( k /= 1 ) THEN
	642	ug(k) = ug(k-1) + dzu(k) * gradient
	643	ELSE
	644	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	645	ENDIF
[1]	646	ELSE
[97]	647	ug(k) = ug(k-1)
[1]	648	ENDIF
[97]	649	ENDDO
[1]	650
[97]	651	ELSE
	652
	653	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	654	ug(nzt+1) = ug_surface
[97]	655	DO k = nzt, 0, -1
[177]	656	IF ( i < 11 ) THEN
	657	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	658	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	659	gradient = ug_vertical_gradient(i) / 100.0
	660	ug_vertical_gradient_level_ind(i) = k + 1
	661	i = i + 1
[97]	662	ENDIF
	663	ENDIF
	664	IF ( gradient /= 0.0 ) THEN
	665	IF ( k /= nzt ) THEN
	666	ug(k) = ug(k+1) - dzu(k+1) * gradient
	667	ELSE
	668	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	669	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	670	ENDIF
	671	ELSE
	672	ug(k) = ug(k+1)
	673	ENDIF
	674	ENDDO
	675
	676	ENDIF
	677
[1]	678	u_init = ug
	679
	680	!
	681	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	682	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	683	ug_vertical_gradient_level(1) = 0.0
	684	ENDIF
	685
	686	!
	687	!--
	688	!-- If required, compute initial profile of the geostrophic wind
	689	!-- (component vg)
	690	i = 1
	691	gradient = 0.0
[97]	692
	693	IF ( .NOT. ocean ) THEN
	694
	695	vg_vertical_gradient_level_ind(1) = 0
	696	vg(0) = vg_surface
	697	DO k = 1, nzt+1
[177]	698	IF ( i < 11 ) THEN
	699	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	700	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	701	gradient = vg_vertical_gradient(i) / 100.0
	702	vg_vertical_gradient_level_ind(i) = k - 1
	703	i = i + 1
[1]	704	ENDIF
	705	ENDIF
[97]	706	IF ( gradient /= 0.0 ) THEN
	707	IF ( k /= 1 ) THEN
	708	vg(k) = vg(k-1) + dzu(k) * gradient
	709	ELSE
	710	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	711	ENDIF
[1]	712	ELSE
[97]	713	vg(k) = vg(k-1)
[1]	714	ENDIF
[97]	715	ENDDO
[1]	716
[97]	717	ELSE
	718
[121]	719	vg_vertical_gradient_level_ind(1) = nzt+1
	720	vg(nzt+1) = vg_surface
[97]	721	DO k = nzt, 0, -1
[177]	722	IF ( i < 11 ) THEN
	723	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	724	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	725	gradient = vg_vertical_gradient(i) / 100.0
	726	vg_vertical_gradient_level_ind(i) = k + 1
	727	i = i + 1
[97]	728	ENDIF
	729	ENDIF
	730	IF ( gradient /= 0.0 ) THEN
	731	IF ( k /= nzt ) THEN
	732	vg(k) = vg(k+1) - dzu(k+1) * gradient
	733	ELSE
	734	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	735	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	736	ENDIF
	737	ELSE
	738	vg(k) = vg(k+1)
	739	ENDIF
	740	ENDDO
	741
	742	ENDIF
	743
[1]	744	v_init = vg
	745
	746	!
	747	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	748	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	749	vg_vertical_gradient_level(1) = 0.0
	750	ENDIF
	751
	752	!
[94]	753	!-- Compute initial temperature profile using the given temperature gradients
[1]	754	i = 1
	755	gradient = 0.0
[94]	756
	757	IF ( .NOT. ocean ) THEN
	758
	759	pt_vertical_gradient_level_ind(1) = 0
	760	DO k = 1, nzt+1
[177]	761	IF ( i < 11 ) THEN
	762	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	763	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	764	gradient = pt_vertical_gradient(i) / 100.0
	765	pt_vertical_gradient_level_ind(i) = k - 1
	766	i = i + 1
[1]	767	ENDIF
	768	ENDIF
[94]	769	IF ( gradient /= 0.0 ) THEN
	770	IF ( k /= 1 ) THEN
	771	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	772	ELSE
	773	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	774	ENDIF
[1]	775	ELSE
[94]	776	pt_init(k) = pt_init(k-1)
[1]	777	ENDIF
[94]	778	ENDDO
[1]	779
[94]	780	ELSE
	781
	782	pt_vertical_gradient_level_ind(1) = nzt+1
	783	DO k = nzt, 0, -1
[177]	784	IF ( i < 11 ) THEN
	785	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	786	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	787	gradient = pt_vertical_gradient(i) / 100.0
	788	pt_vertical_gradient_level_ind(i) = k + 1
	789	i = i + 1
[94]	790	ENDIF
	791	ENDIF
	792	IF ( gradient /= 0.0 ) THEN
	793	IF ( k /= nzt ) THEN
	794	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	795	ELSE
	796	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	797	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	798	ENDIF
	799	ELSE
	800	pt_init(k) = pt_init(k+1)
	801	ENDIF
	802	ENDDO
	803
	804	ENDIF
	805
[1]	806	!
	807	!-- In case of no given temperature gradients, choose gradient of neutral
	808	!-- stratification
[94]	809	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	810	pt_vertical_gradient_level(1) = 0.0
	811	ENDIF
	812
	813	!
[94]	814	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	815	!-- boundary condition
[19]	816	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	817
	818	!
	819	!-- If required, compute initial humidity or scalar profile using the given
	820	!-- humidity/scalar gradient. In case of scalar transport, initially store
	821	!-- values of the scalar parameters on humidity parameters
	822	IF ( passive_scalar ) THEN
	823	bc_q_b = bc_s_b
	824	bc_q_t = bc_s_t
	825	q_surface = s_surface
	826	q_surface_initial_change = s_surface_initial_change
	827	q_vertical_gradient = s_vertical_gradient
	828	q_vertical_gradient_level = s_vertical_gradient_level
	829	surface_waterflux = surface_scalarflux
	830	ENDIF
	831
[75]	832	IF ( humidity .OR. passive_scalar ) THEN
[1]	833
	834	i = 1
	835	gradient = 0.0
	836	q_vertical_gradient_level_ind(1) = 0
	837	DO k = 1, nzt+1
[177]	838	IF ( i < 11 ) THEN
	839	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	840	q_vertical_gradient_level(i) >= 0.0 ) THEN
	841	gradient = q_vertical_gradient(i) / 100.0
	842	q_vertical_gradient_level_ind(i) = k - 1
	843	i = i + 1
[1]	844	ENDIF
	845	ENDIF
	846	IF ( gradient /= 0.0 ) THEN
	847	IF ( k /= 1 ) THEN
	848	q_init(k) = q_init(k-1) + dzu(k) * gradient
	849	ELSE
	850	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	851	ENDIF
	852	ELSE
	853	q_init(k) = q_init(k-1)
	854	ENDIF
[72]	855	!
	856	!-- Avoid negative humidities
	857	IF ( q_init(k) < 0.0 ) THEN
	858	q_init(k) = 0.0
	859	ENDIF
[1]	860	ENDDO
	861
	862	!
	863	!-- In case of no given humidity gradients, choose zero gradient
	864	!-- conditions
	865	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	866	q_vertical_gradient_level(1) = 0.0
	867	ENDIF
	868
	869	!
	870	!-- Store humidity gradient at the top boundary for possile Neumann
	871	!-- boundary condition
[19]	872	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	873
	874	ENDIF
	875
[94]	876	!
	877	!-- If required, compute initial salinity profile using the given salinity
	878	!-- gradients
	879	IF ( ocean ) THEN
	880
	881	i = 1
	882	gradient = 0.0
	883
	884	sa_vertical_gradient_level_ind(1) = nzt+1
	885	DO k = nzt, 0, -1
[177]	886	IF ( i < 11 ) THEN
	887	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	888	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	889	gradient = sa_vertical_gradient(i) / 100.0
	890	sa_vertical_gradient_level_ind(i) = k + 1
	891	i = i + 1
[94]	892	ENDIF
	893	ENDIF
	894	IF ( gradient /= 0.0 ) THEN
	895	IF ( k /= nzt ) THEN
	896	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	897	ELSE
	898	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	899	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	900	ENDIF
	901	ELSE
	902	sa_init(k) = sa_init(k+1)
	903	ENDIF
	904	ENDDO
	905
	906	ENDIF
	907
[138]	908	!
	909	!-- If required compute the profile of leaf area density used in the plant canopy model
	910	IF ( plant_canopy ) THEN
	911
	912	i = 1
	913	gradient = 0.0
[1]	914
[138]	915	IF ( .NOT. ocean ) THEN
[153]	916
	917	lad(0) = lad_surface
[138]	918
	919	lad_vertical_gradient_level_ind(1) = 0
	920	DO k = 1, pch_index
[177]	921	IF ( i < 11 ) THEN
	922	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	923	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	924	gradient = lad_vertical_gradient(i)
	925	lad_vertical_gradient_level_ind(i) = k - 1
	926	i = i + 1
[138]	927	ENDIF
	928	ENDIF
	929	IF ( gradient /= 0.0 ) THEN
	930	IF ( k /= 1 ) THEN
	931	lad(k) = lad(k-1) + dzu(k) * gradient
	932	ELSE
	933	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	934	ENDIF
	935	ELSE
	936	lad(k) = lad(k-1)
	937	ENDIF
	938	ENDDO
	939
	940	ENDIF
	941
[1]	942	!
[138]	943	!-- In case of no given leaf area density gradients, choose a vanishing gradient
	944	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	945	lad_vertical_gradient_level(1) = 0.0
	946	ENDIF
	947
	948	ENDIF
	949
	950	ENDIF
	951
	952	!
[1]	953	!-- Compute Coriolis parameter
	954	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	955	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	956
	957	!
[97]	958	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	959	!-- set the reference temperature equal to the surface temperature.
	960	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	961
	962	!
[97]	963	!-- Reference value has to be used in buoyancy terms
	964	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	965
	966	!
	967	!-- Sign of buoyancy/stability terms
	968	IF ( ocean ) atmos_ocean_sign = -1.0
	969
	970	!
[108]	971	!-- Ocean version must use flux boundary conditions at the top
	972	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	973	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	974	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	975	ENDIF
[97]	976
	977	!
[1]	978	!-- In case of a given slope, compute the relevant quantities
	979	IF ( alpha_surface /= 0.0 ) THEN
	980	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	981	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	982	' ) must be < 90.0'
[226]	983	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	984	ENDIF
	985	sloping_surface = .TRUE.
	986	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	987	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	988	ENDIF
	989
	990	!
	991	!-- Check time step and cfl_factor
	992	IF ( dt /= -1.0 ) THEN
	993	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	994	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	995	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	996	ENDIF
	997	dt_3d = dt
	998	dt_fixed = .TRUE.
	999	ENDIF
	1000
	1001	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1002	IF ( cfl_factor == -1.0 ) THEN
	1003	IF ( momentum_advec == 'ups-scheme' .OR. &
	1004	scalar_advec == 'ups-scheme' ) THEN
	1005	cfl_factor = 0.8
	1006	ELSE
	1007	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1008	cfl_factor = 0.8
	1009	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1010	cfl_factor = 0.9
	1011	ELSE
	1012	cfl_factor = 0.1
	1013	ENDIF
	1014	ENDIF
	1015	ELSE
[215]	1016	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1017	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1018	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1019	ENDIF
	1020	ENDIF
	1021
	1022	!
	1023	!-- Store simulated time at begin
	1024	simulated_time_at_begin = simulated_time
	1025
	1026	!
	1027	!-- Set wind speed in the Galilei-transformed system
	1028	IF ( galilei_transformation ) THEN
	1029	IF ( use_ug_for_galilei_tr .AND. &
	1030	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1031	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1032	u_gtrans = ug_surface
	1033	v_gtrans = vg_surface
	1034	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1035	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1036	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1037	' with galilei transformation'
[226]	1038	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1039	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1040	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1041	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1042	' with galilei transformation'
[226]	1043	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1044	ELSE
[215]	1045	message_string = 'variable translation speed used for galilei-' // &
	1046	'transformation, which may cause & instabilities in stably ' // &
	1047	'stratified regions'
[226]	1048	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1049	ENDIF
	1050	ENDIF
	1051
	1052	!
	1053	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1054	!-- fluxes have to be used in the diffusion-terms
	1055	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1056
	1057	!
	1058	!-- Check boundary conditions and set internal variables:
	1059	!-- Lateral boundary conditions
[73]	1060	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1061	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1062	message_string = 'unknown boundary condition: bc_lr = "' // &
	1063	TRIM( bc_lr ) // '"'
[226]	1064	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1065	ENDIF
[73]	1066	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1067	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1068	message_string = 'unknown boundary condition: bc_ns = "' // &
	1069	TRIM( bc_ns ) // '"'
[226]	1070	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1071	ENDIF
	1072
	1073	!
	1074	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1075	!-- Willimas advection scheme. Several schemes and tools do not work with
	1076	!-- non-cyclic boundary conditions.
	1077	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1078	IF ( psolver /= 'multigrid' ) THEN
[215]	1079	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1080	'psolver = "' // TRIM( psolver ) // '"'
[226]	1081	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1082	ENDIF
	1083	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1084	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1085	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1086	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1087	ENDIF
	1088	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1089	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1090	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1091	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1092	ENDIF
	1093	IF ( galilei_transformation ) THEN
[215]	1094	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1095	'galilei_transformation = .T.'
[226]	1096	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1097	ENDIF
	1098	ENDIF
	1099
	1100	!
	1101	!-- Bottom boundary condition for the turbulent Kinetic energy
	1102	IF ( bc_e_b == 'neumann' ) THEN
	1103	ibc_e_b = 1
	1104	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1105	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1106	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1107	ENDIF
	1108	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1109	ibc_e_b = 2
	1110	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1111	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1112	TRIM( bc_e_b ) // '"'
[226]	1113	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1114	ENDIF
	1115	IF ( .NOT. prandtl_layer ) THEN
	1116	bc_e_b = 'neumann'
	1117	ibc_e_b = 1
[215]	1118	message_string = 'boundary condition bc_e_b changed to "' // &
	1119	TRIM( bc_e_b ) // '"'
[226]	1120	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1121	ENDIF
	1122	ELSE
[215]	1123	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1124	TRIM( bc_e_b ) // '"'
[226]	1125	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1126	ENDIF
	1127
	1128	!
	1129	!-- Boundary conditions for perturbation pressure
	1130	IF ( bc_p_b == 'dirichlet' ) THEN
	1131	ibc_p_b = 0
	1132	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1133	ibc_p_b = 1
	1134	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1135	ibc_p_b = 2
	1136	ELSE
[215]	1137	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1138	TRIM( bc_p_b ) // '"'
[226]	1139	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1140	ENDIF
	1141	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1142	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1143	'" not allowed with prandtl_layer = .FALSE.'
[226]	1144	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1145	ENDIF
	1146	IF ( bc_p_t == 'dirichlet' ) THEN
	1147	ibc_p_t = 0
	1148	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1149	ibc_p_t = 1
	1150	ELSE
[215]	1151	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1152	TRIM( bc_p_t ) // '"'
[226]	1153	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1154	ENDIF
	1155
	1156	!
	1157	!-- Boundary conditions for potential temperature
[102]	1158	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1159	ibc_pt_b = 2
[1]	1160	ELSE
[102]	1161	IF ( bc_pt_b == 'dirichlet' ) THEN
	1162	ibc_pt_b = 0
	1163	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1164	ibc_pt_b = 1
	1165	ELSE
[215]	1166	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1167	TRIM( bc_pt_b ) // '"'
[226]	1168	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1169	ENDIF
	1170	ENDIF
[102]	1171
[1]	1172	IF ( bc_pt_t == 'dirichlet' ) THEN
	1173	ibc_pt_t = 0
	1174	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1175	ibc_pt_t = 1
[19]	1176	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1177	ibc_pt_t = 2
[1]	1178	ELSE
[215]	1179	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1180	TRIM( bc_pt_t ) // '"'
[226]	1181	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1182	ENDIF
	1183
[20]	1184	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1185	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1186	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1187	top_momentumflux_v /= 9999999.9 ) THEN
	1188	constant_top_momentumflux = .TRUE.
	1189	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1190	top_momentumflux_v == 9999999.9 ) ) THEN
	1191	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1192	'must be set'
[226]	1193	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1194	ENDIF
[1]	1195
	1196	!
	1197	!-- A given surface temperature implies Dirichlet boundary condition for
	1198	!-- temperature. In this case specification of a constant heat flux is
	1199	!-- forbidden.
	1200	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1201	surface_heatflux /= 0.0 ) THEN
[215]	1202	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1203	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1204	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1205	ENDIF
	1206	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1207	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1208	'wed with pt_surface_initial_change (/=0) = ', &
	1209	pt_surface_initial_change
[226]	1210	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1211	ENDIF
	1212
	1213	!
[19]	1214	!-- A given temperature at the top implies Dirichlet boundary condition for
	1215	!-- temperature. In this case specification of a constant heat flux is
	1216	!-- forbidden.
	1217	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1218	top_heatflux /= 0.0 ) THEN
[215]	1219	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1220	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1221	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1222	ENDIF
	1223
	1224	!
[95]	1225	!-- Boundary conditions for salinity
	1226	IF ( ocean ) THEN
	1227	IF ( bc_sa_t == 'dirichlet' ) THEN
	1228	ibc_sa_t = 0
	1229	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1230	ibc_sa_t = 1
	1231	ELSE
[215]	1232	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1233	TRIM( bc_sa_t ) // '"'
[226]	1234	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1235	ENDIF
	1236
	1237	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1238	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1239	message_string = 'boundary condition: bc_sa_t = "' // &
	1240	TRIM( bc_sa_t ) // '" requires to set ' // &
	1241	'top_salinityflux'
[226]	1242	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1243	ENDIF
[95]	1244
	1245	!
	1246	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1247	!-- salinity. In this case specification of a constant salinity flux is
	1248	!-- forbidden.
	1249	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1250	top_salinityflux /= 0.0 ) THEN
[215]	1251	message_string = 'boundary condition: bc_sa_t = "' // &
	1252	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1253	'constant_top_salinityflux = .TRUE.'
[226]	1254	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1255	ENDIF
	1256
	1257	ENDIF
	1258
	1259	!
[75]	1260	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1261	!-- water content / scalar
[75]	1262	IF ( humidity .OR. passive_scalar ) THEN
	1263	IF ( humidity ) THEN
[1]	1264	sq = 'q'
	1265	ELSE
	1266	sq = 's'
	1267	ENDIF
	1268	IF ( bc_q_b == 'dirichlet' ) THEN
	1269	ibc_q_b = 0
	1270	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1271	ibc_q_b = 1
	1272	ELSE
[215]	1273	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1274	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1275	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1276	ENDIF
	1277	IF ( bc_q_t == 'dirichlet' ) THEN
	1278	ibc_q_t = 0
	1279	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1280	ibc_q_t = 1
	1281	ELSE
[215]	1282	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1283	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1284	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1285	ENDIF
	1286
	1287	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1288
	1289	!
	1290	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1291	!-- humidity. In this case specification of a constant water flux is
[1]	1292	!-- forbidden.
	1293	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1294	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1295	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1296	'th prescribed surface flux'
[226]	1297	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1298	ENDIF
	1299	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1300	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1301	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1302	q_surface_initial_change
[226]	1303	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1304	ENDIF
	1305
	1306	ENDIF
	1307
	1308	!
	1309	!-- Boundary conditions for horizontal components of wind speed
	1310	IF ( bc_uv_b == 'dirichlet' ) THEN
	1311	ibc_uv_b = 0
	1312	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1313	ibc_uv_b = 1
	1314	IF ( prandtl_layer ) THEN
[215]	1315	message_string = 'boundary condition: bc_uv_b = "' // &
	1316	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1317	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1318	ENDIF
	1319	ELSE
[215]	1320	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1321	TRIM( bc_uv_b ) // '"'
[226]	1322	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1323	ENDIF
[215]	1324
[108]	1325	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1326	bc_uv_t = 'neumann'
[1]	1327	ibc_uv_t = 1
	1328	ELSE
[132]	1329	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1330	ibc_uv_t = 0
	1331	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1332	ibc_uv_t = 1
	1333	ELSE
[215]	1334	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1335	TRIM( bc_uv_t ) // '"'
[226]	1336	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1337	ENDIF
	1338	ENDIF
	1339
	1340	!
	1341	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1342	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1343	IF ( momentum_advec == 'ups-scheme' ) THEN
	1344	rayleigh_damping_factor = 0.01
	1345	ELSE
	1346	rayleigh_damping_factor = 0.0
	1347	ENDIF
	1348	ELSE
	1349	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1350	THEN
[215]	1351	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1352	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1353	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1354	ENDIF
	1355	ENDIF
	1356
	1357	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1358	IF ( .NOT. ocean ) THEN
	1359	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1360	ELSE
	1361	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1362	ENDIF
[1]	1363	ELSE
[108]	1364	IF ( .NOT. ocean ) THEN
	1365	IF ( rayleigh_damping_height < 0.0 .OR. &
	1366	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1367	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1368	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1369	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1370	ENDIF
[108]	1371	ELSE
	1372	IF ( rayleigh_damping_height > 0.0 .OR. &
	1373	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1374	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1375	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1376	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1377	ENDIF
[1]	1378	ENDIF
	1379	ENDIF
	1380
	1381	!
	1382	!-- Check limiters for Upstream-Spline scheme
	1383	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1384	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1385	overshoot_limit_e < 0.0 ) THEN
[215]	1386	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1387	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1388	ENDIF
	1389	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1390	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1391	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1392	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1393	ENDIF
	1394
	1395	!
	1396	!-- Check number of chosen statistic regions. More than 10 regions are not
	1397	!-- allowed, because so far no more than 10 corresponding output files can
	1398	!-- be opened (cf. check_open)
	1399	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1400	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1401	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1402	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1403	ENDIF
	1404	IF ( normalizing_region > statistic_regions .OR. &
	1405	normalizing_region < 0) THEN
[215]	1406	WRITE ( message_string, * ) 'normalizing_region = ', &
	1407	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1408	' (value of statistic_regions)'
[226]	1409	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1410	ENDIF
	1411
	1412	!
[116]	1413	!-- Check the interval for sorting particles.
	1414	!-- Using particles as cloud droplets requires sorting after each timestep.
	1415	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1416	dt_sort_particles = 0.0
[215]	1417	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1418	'_droplets = .TRUE.'
[226]	1419	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1420	ENDIF
	1421
	1422	!
[1]	1423	!-- Set the default intervals for data output, if necessary
	1424	!-- NOTE: dt_dosp has already been set in package_parin
	1425	IF ( dt_data_output /= 9999999.9 ) THEN
	1426	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1427	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1428	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1429	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1430	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1431	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1432	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1433	ENDIF
	1434
	1435	!
	1436	!-- Set the default skip time intervals for data output, if necessary
	1437	IF ( skip_time_dopr == 9999999.9 ) &
	1438	skip_time_dopr = skip_time_data_output
	1439	IF ( skip_time_dosp == 9999999.9 ) &
	1440	skip_time_dosp = skip_time_data_output
	1441	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1442	skip_time_do2d_xy = skip_time_data_output
	1443	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1444	skip_time_do2d_xz = skip_time_data_output
	1445	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1446	skip_time_do2d_yz = skip_time_data_output
	1447	IF ( skip_time_do3d == 9999999.9 ) &
	1448	skip_time_do3d = skip_time_data_output
	1449	IF ( skip_time_data_output_av == 9999999.9 ) &
	1450	skip_time_data_output_av = skip_time_data_output
	1451
	1452	!
	1453	!-- Check the average intervals (first for 3d-data, then for profiles and
	1454	!-- spectra)
	1455	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1456	WRITE( message_string, * ) 'averaging_interval = ', &
	1457	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1458	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1459	ENDIF
	1460
	1461	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1462	averaging_interval_pr = averaging_interval
	1463	ENDIF
	1464
	1465	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1466	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1467	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1468	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1469	ENDIF
	1470
	1471	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1472	averaging_interval_sp = averaging_interval
	1473	ENDIF
	1474
	1475	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1476	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1477	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1478	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1479	ENDIF
	1480
	1481	!
	1482	!-- Set the default interval for profiles entering the temporal average
	1483	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1484	dt_averaging_input_pr = dt_averaging_input
	1485	ENDIF
	1486
	1487	!
	1488	!-- Set the default interval for the output of timeseries to a reasonable
	1489	!-- value (tries to minimize the number of calls of flow_statistics)
	1490	IF ( dt_dots == 9999999.9 ) THEN
	1491	IF ( averaging_interval_pr == 0.0 ) THEN
	1492	dt_dots = MIN( dt_run_control, dt_dopr )
	1493	ELSE
	1494	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1495	ENDIF
	1496	ENDIF
	1497
	1498	!
	1499	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1500	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1501	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1502	dt_averaging_input, ' must be <= averaging_interval = ', &
	1503	averaging_interval
[226]	1504	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1505	ENDIF
	1506
	1507	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1508	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1509	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1510	averaging_interval_pr
[226]	1511	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1512	ENDIF
	1513
	1514	!
[72]	1515	!-- Set the default value for the integration interval of precipitation amount
	1516	IF ( precipitation ) THEN
	1517	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1518	precipitation_amount_interval = dt_do2d_xy
	1519	ELSE
	1520	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1521	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1522	precipitation_amount_interval, ' must not be larger than ', &
	1523	'dt_do2d_xy = ', dt_do2d_xy
[226]	1524	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1525	ENDIF
	1526	ENDIF
	1527	ENDIF
	1528
	1529	!
[1]	1530	!-- Determine the number of output profiles and check whether they are
	1531	!-- permissible
	1532	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1533
	1534	dopr_n = dopr_n + 1
	1535	i = dopr_n
	1536
	1537	!
	1538	!-- Determine internal profile number (for hom, homs)
	1539	!-- and store height levels
	1540	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1541
	1542	CASE ( 'u', '#u' )
	1543	dopr_index(i) = 1
[87]	1544	dopr_unit(i) = 'm/s'
[1]	1545	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1546	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1547	dopr_initial_index(i) = 5
	1548	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1549	data_output_pr(i) = data_output_pr(i)(2:)
	1550	ENDIF
	1551
	1552	CASE ( 'v', '#v' )
	1553	dopr_index(i) = 2
[87]	1554	dopr_unit(i) = 'm/s'
	1555	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1556	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1557	dopr_initial_index(i) = 6
	1558	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1559	data_output_pr(i) = data_output_pr(i)(2:)
	1560	ENDIF
	1561
	1562	CASE ( 'w' )
	1563	dopr_index(i) = 3
[87]	1564	dopr_unit(i) = 'm/s'
	1565	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1566
	1567	CASE ( 'pt', '#pt' )
	1568	IF ( .NOT. cloud_physics ) THEN
	1569	dopr_index(i) = 4
[87]	1570	dopr_unit(i) = 'K'
[1]	1571	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1572	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1573	dopr_initial_index(i) = 7
	1574	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1575	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1576	data_output_pr(i) = data_output_pr(i)(2:)
	1577	ENDIF
	1578	ELSE
	1579	dopr_index(i) = 43
[87]	1580	dopr_unit(i) = 'K'
[1]	1581	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1582	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1583	dopr_initial_index(i) = 28
	1584	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1585	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1586	data_output_pr(i) = data_output_pr(i)(2:)
	1587	ENDIF
	1588	ENDIF
	1589
	1590	CASE ( 'e' )
	1591	dopr_index(i) = 8
[87]	1592	dopr_unit(i) = 'm2/s2'
[1]	1593	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1594	hom(nzb,2,8,:) = 0.0
	1595
	1596	CASE ( 'km', '#km' )
	1597	dopr_index(i) = 9
[87]	1598	dopr_unit(i) = 'm2/s'
[1]	1599	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1600	hom(nzb,2,9,:) = 0.0
	1601	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1602	dopr_initial_index(i) = 23
	1603	hom(:,2,23,:) = hom(:,2,9,:)
	1604	data_output_pr(i) = data_output_pr(i)(2:)
	1605	ENDIF
	1606
	1607	CASE ( 'kh', '#kh' )
	1608	dopr_index(i) = 10
[87]	1609	dopr_unit(i) = 'm2/s'
[1]	1610	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1611	hom(nzb,2,10,:) = 0.0
	1612	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1613	dopr_initial_index(i) = 24
	1614	hom(:,2,24,:) = hom(:,2,10,:)
	1615	data_output_pr(i) = data_output_pr(i)(2:)
	1616	ENDIF
	1617
	1618	CASE ( 'l', '#l' )
	1619	dopr_index(i) = 11
[87]	1620	dopr_unit(i) = 'm'
[1]	1621	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1622	hom(nzb,2,11,:) = 0.0
	1623	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1624	dopr_initial_index(i) = 25
	1625	hom(:,2,25,:) = hom(:,2,11,:)
	1626	data_output_pr(i) = data_output_pr(i)(2:)
	1627	ENDIF
	1628
	1629	CASE ( 'w"u"' )
	1630	dopr_index(i) = 12
[87]	1631	dopr_unit(i) = 'm2/s2'
[1]	1632	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1633	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1634
	1635	CASE ( 'wu' )
	1636	dopr_index(i) = 13
[87]	1637	dopr_unit(i) = 'm2/s2'
[1]	1638	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1639
	1640	CASE ( 'w"v"' )
	1641	dopr_index(i) = 14
[87]	1642	dopr_unit(i) = 'm2/s2'
[1]	1643	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1644	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1645
	1646	CASE ( 'wv' )
	1647	dopr_index(i) = 15
[87]	1648	dopr_unit(i) = 'm2/s2'
[1]	1649	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1650
	1651	CASE ( 'w"pt"' )
	1652	dopr_index(i) = 16
[87]	1653	dopr_unit(i) = 'K m/s'
[1]	1654	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1655
	1656	CASE ( 'wpt' )
	1657	dopr_index(i) = 17
[87]	1658	dopr_unit(i) = 'K m/s'
[1]	1659	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1660
	1661	CASE ( 'wpt' )
	1662	dopr_index(i) = 18
[87]	1663	dopr_unit(i) = 'K m/s'
[1]	1664	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1665
	1666	CASE ( 'wu' )
	1667	dopr_index(i) = 19
[87]	1668	dopr_unit(i) = 'm2/s2'
[1]	1669	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1670	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1671
	1672	CASE ( 'wv' )
	1673	dopr_index(i) = 20
[87]	1674	dopr_unit(i) = 'm2/s2'
[1]	1675	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1676	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1677
	1678	CASE ( 'wptBC' )
	1679	dopr_index(i) = 21
[87]	1680	dopr_unit(i) = 'K m/s'
[1]	1681	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1682
	1683	CASE ( 'wptBC' )
	1684	dopr_index(i) = 22
[87]	1685	dopr_unit(i) = 'K m/s'
[1]	1686	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1687
[96]	1688	CASE ( 'sa', '#sa' )
	1689	IF ( .NOT. ocean ) THEN
[215]	1690	message_string = 'data_output_pr = ' // &
	1691	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1692	'lemented for ocean = .FALSE.'
[226]	1693	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1694	ELSE
	1695	dopr_index(i) = 23
	1696	dopr_unit(i) = 'psu'
	1697	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1698	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1699	dopr_initial_index(i) = 26
	1700	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1701	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1702	data_output_pr(i) = data_output_pr(i)(2:)
	1703	ENDIF
	1704	ENDIF
	1705
[1]	1706	CASE ( 'u*2' )
	1707	dopr_index(i) = 30
[87]	1708	dopr_unit(i) = 'm2/s2'
[1]	1709	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1710
	1711	CASE ( 'v*2' )
	1712	dopr_index(i) = 31
[87]	1713	dopr_unit(i) = 'm2/s2'
[1]	1714	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1715
	1716	CASE ( 'w*2' )
	1717	dopr_index(i) = 32
[87]	1718	dopr_unit(i) = 'm2/s2'
[1]	1719	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1720
	1721	CASE ( 'pt*2' )
	1722	dopr_index(i) = 33
[87]	1723	dopr_unit(i) = 'K2'
[1]	1724	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1725
	1726	CASE ( 'e*' )
	1727	dopr_index(i) = 34
[87]	1728	dopr_unit(i) = 'm2/s2'
[1]	1729	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1730
	1731	CASE ( 'w2pt' )
	1732	dopr_index(i) = 35
[87]	1733	dopr_unit(i) = 'K m2/s2'
[1]	1734	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1735
	1736	CASE ( 'wpt2' )
	1737	dopr_index(i) = 36
[87]	1738	dopr_unit(i) = 'K2 m/s'
[1]	1739	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1740
	1741	CASE ( 'we' )
	1742	dopr_index(i) = 37
[87]	1743	dopr_unit(i) = 'm3/s3'
[1]	1744	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1745
	1746	CASE ( 'w*3' )
	1747	dopr_index(i) = 38
[87]	1748	dopr_unit(i) = 'm3/s3'
[1]	1749	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1750
	1751	CASE ( 'Sw' )
	1752	dopr_index(i) = 39
[89]	1753	dopr_unit(i) = 'none'
[1]	1754	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1755
[232]	1756	CASE ( 'p' )
	1757	dopr_index(i) = 40
	1758	dopr_unit(i) = 'Pa'
	1759	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1760
[1]	1761	CASE ( 'q', '#q' )
[108]	1762	IF ( .NOT. humidity ) THEN
[215]	1763	message_string = 'data_output_pr = ' // &
	1764	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1765	'lemented for humidity = .FALSE.'
[226]	1766	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1767	ELSE
	1768	dopr_index(i) = 41
[87]	1769	dopr_unit(i) = 'kg/kg'
	1770	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1771	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1772	dopr_initial_index(i) = 26
	1773	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1774	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1775	data_output_pr(i) = data_output_pr(i)(2:)
	1776	ENDIF
	1777	ENDIF
	1778
	1779	CASE ( 's', '#s' )
	1780	IF ( .NOT. passive_scalar ) THEN
[215]	1781	message_string = 'data_output_pr = ' // &
	1782	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1783	'lemented for passive_scalar = .FALSE.'
[226]	1784	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1785	ELSE
	1786	dopr_index(i) = 41
[87]	1787	dopr_unit(i) = 'kg/m3'
	1788	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1789	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1790	dopr_initial_index(i) = 26
	1791	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1792	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1793	data_output_pr(i) = data_output_pr(i)(2:)
	1794	ENDIF
	1795	ENDIF
	1796
	1797	CASE ( 'qv', '#qv' )
	1798	IF ( .NOT. cloud_physics ) THEN
	1799	dopr_index(i) = 41
[87]	1800	dopr_unit(i) = 'kg/kg'
	1801	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1802	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1803	dopr_initial_index(i) = 26
	1804	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1805	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1806	data_output_pr(i) = data_output_pr(i)(2:)
	1807	ENDIF
	1808	ELSE
	1809	dopr_index(i) = 42
[87]	1810	dopr_unit(i) = 'kg/kg'
	1811	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1812	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1813	dopr_initial_index(i) = 27
	1814	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1815	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1816	data_output_pr(i) = data_output_pr(i)(2:)
	1817	ENDIF
	1818	ENDIF
	1819
	1820	CASE ( 'lpt', '#lpt' )
	1821	IF ( .NOT. cloud_physics ) THEN
[215]	1822	message_string = 'data_output_pr = ' // &
	1823	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1824	'lemented for cloud_physics = .FALSE.'
[226]	1825	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	1826	ELSE
	1827	dopr_index(i) = 4
[87]	1828	dopr_unit(i) = 'K'
[1]	1829	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1830	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1831	dopr_initial_index(i) = 7
	1832	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1833	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1834	data_output_pr(i) = data_output_pr(i)(2:)
	1835	ENDIF
	1836	ENDIF
	1837
	1838	CASE ( 'vpt', '#vpt' )
	1839	dopr_index(i) = 44
[87]	1840	dopr_unit(i) = 'K'
	1841	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1842	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1843	dopr_initial_index(i) = 29
	1844	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1845	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1846	data_output_pr(i) = data_output_pr(i)(2:)
	1847	ENDIF
	1848
	1849	CASE ( 'w"vpt"' )
	1850	dopr_index(i) = 45
[87]	1851	dopr_unit(i) = 'K m/s'
[1]	1852	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1853
	1854	CASE ( 'wvpt' )
	1855	dopr_index(i) = 46
[87]	1856	dopr_unit(i) = 'K m/s'
[1]	1857	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1858
	1859	CASE ( 'wvpt' )
	1860	dopr_index(i) = 47
[87]	1861	dopr_unit(i) = 'K m/s'
[1]	1862	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1863
	1864	CASE ( 'w"q"' )
[108]	1865	IF ( .NOT. humidity ) THEN
[215]	1866	message_string = 'data_output_pr = ' // &
	1867	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1868	'lemented for humidity = .FALSE.'
[226]	1869	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1870	ELSE
	1871	dopr_index(i) = 48
[87]	1872	dopr_unit(i) = 'kg/kg m/s'
[1]	1873	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1874	ENDIF
	1875
	1876	CASE ( 'wq' )
[108]	1877	IF ( .NOT. humidity ) THEN
[215]	1878	message_string = 'data_output_pr = ' // &
	1879	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1880	'lemented for humidity = .FALSE.'
[226]	1881	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1882	ELSE
	1883	dopr_index(i) = 49
[87]	1884	dopr_unit(i) = 'kg/kg m/s'
[1]	1885	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1886	ENDIF
	1887
	1888	CASE ( 'wq' )
[108]	1889	IF ( .NOT. humidity ) THEN
[215]	1890	message_string = 'data_output_pr = ' // &
	1891	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1892	'lemented for humidity = .FALSE.'
[226]	1893	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1894	ELSE
	1895	dopr_index(i) = 50
[87]	1896	dopr_unit(i) = 'kg/kg m/s'
[1]	1897	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1898	ENDIF
	1899
	1900	CASE ( 'w"s"' )
	1901	IF ( .NOT. passive_scalar ) THEN
[215]	1902	message_string = 'data_output_pr = ' // &
	1903	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1904	'lemented for passive_scalar = .FALSE.'
[226]	1905	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1906	ELSE
	1907	dopr_index(i) = 48
[87]	1908	dopr_unit(i) = 'kg/m3 m/s'
[1]	1909	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1910	ENDIF
	1911
	1912	CASE ( 'ws' )
	1913	IF ( .NOT. passive_scalar ) THEN
[215]	1914	message_string = 'data_output_pr = ' // &
	1915	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1916	'lemented for passive_scalar = .FALSE.'
[226]	1917	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1918	ELSE
	1919	dopr_index(i) = 49
[87]	1920	dopr_unit(i) = 'kg/m3 m/s'
[1]	1921	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1922	ENDIF
	1923
	1924	CASE ( 'ws' )
	1925	IF ( .NOT. passive_scalar ) THEN
[215]	1926	message_string = 'data_output_pr = ' // &
	1927	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1928	'lemented for passive_scalar = .FALSE.'
[226]	1929	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1930	ELSE
	1931	dopr_index(i) = 50
[87]	1932	dopr_unit(i) = 'kg/m3 m/s'
[1]	1933	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1934	ENDIF
	1935
	1936	CASE ( 'w"qv"' )
[75]	1937	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1938	THEN
	1939	dopr_index(i) = 48
[87]	1940	dopr_unit(i) = 'kg/kg m/s'
[1]	1941	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1942	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1943	dopr_index(i) = 51
[87]	1944	dopr_unit(i) = 'kg/kg m/s'
[1]	1945	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	1946	ELSE
[215]	1947	message_string = 'data_output_pr = ' // &
	1948	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1949	'lemented for cloud_physics = .FALSE. an&' // &
	1950	'd humidity = .FALSE.'
[226]	1951	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1952	ENDIF
	1953
	1954	CASE ( 'wqv' )
[75]	1955	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1956	THEN
	1957	dopr_index(i) = 49
[87]	1958	dopr_unit(i) = 'kg/kg m/s'
[1]	1959	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1960	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1961	dopr_index(i) = 52
[87]	1962	dopr_unit(i) = 'kg/kg m/s'
[1]	1963	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	1964	ELSE
[215]	1965	message_string = 'data_output_pr = ' // &
	1966	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1967	'lemented for cloud_physics = .FALSE. an&' // &
	1968	'd humidity = .FALSE.'
[226]	1969	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1970	ENDIF
	1971
	1972	CASE ( 'wqv' )
[75]	1973	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1974	THEN
	1975	dopr_index(i) = 50
[87]	1976	dopr_unit(i) = 'kg/kg m/s'
[1]	1977	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1978	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1979	dopr_index(i) = 53
[87]	1980	dopr_unit(i) = 'kg/kg m/s'
[1]	1981	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	1982	ELSE
[215]	1983	message_string = 'data_output_pr = ' // &
	1984	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1985	'lemented for cloud_physics = .FALSE. an&' // &
	1986	'd humidity = .FALSE.'
[226]	1987	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1988	ENDIF
	1989
	1990	CASE ( 'ql' )
	1991	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	1992	message_string = 'data_output_pr = ' // &
	1993	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1994	'lemented for cloud_physics = .FALSE. or' // &
	1995	'&cloud_droplets = .FALSE.'
[226]	1996	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	1997	ELSE
	1998	dopr_index(i) = 54
[87]	1999	dopr_unit(i) = 'kg/kg'
[1]	2000	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2001	ENDIF
	2002
	2003	CASE ( 'wuu*/dz' )
	2004	dopr_index(i) = 55
[87]	2005	dopr_unit(i) = 'm2/s3'
[1]	2006	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2007
	2008	CASE ( 'wp/dz' )
	2009	dopr_index(i) = 56
[87]	2010	dopr_unit(i) = 'm2/s3'
[106]	2011	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2012
	2013	CASE ( 'w"e/dz' )
	2014	dopr_index(i) = 57
[87]	2015	dopr_unit(i) = 'm2/s3'
[1]	2016	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2017
	2018	CASE ( 'u"pt"' )
	2019	dopr_index(i) = 58
[87]	2020	dopr_unit(i) = 'K m/s'
[1]	2021	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2022
	2023	CASE ( 'upt' )
	2024	dopr_index(i) = 59
[87]	2025	dopr_unit(i) = 'K m/s'
[1]	2026	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2027
	2028	CASE ( 'upt_t' )
	2029	dopr_index(i) = 60
[87]	2030	dopr_unit(i) = 'K m/s'
[1]	2031	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2032
	2033	CASE ( 'v"pt"' )
	2034	dopr_index(i) = 61
[87]	2035	dopr_unit(i) = 'K m/s'
[1]	2036	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2037
	2038	CASE ( 'vpt' )
	2039	dopr_index(i) = 62
[87]	2040	dopr_unit(i) = 'K m/s'
[1]	2041	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2042
	2043	CASE ( 'vpt_t' )
	2044	dopr_index(i) = 63
[87]	2045	dopr_unit(i) = 'K m/s'
[1]	2046	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2047
[96]	2048	CASE ( 'rho' )
	2049	dopr_index(i) = 64
	2050	dopr_unit(i) = 'kg/m3'
	2051	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2052
[96]	2053	CASE ( 'w"sa"' )
	2054	IF ( .NOT. ocean ) THEN
[215]	2055	message_string = 'data_output_pr = ' // &
	2056	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2057	'lemented for ocean = .FALSE.'
[226]	2058	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2059	ELSE
	2060	dopr_index(i) = 65
	2061	dopr_unit(i) = 'psu m/s'
	2062	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2063	ENDIF
	2064
	2065	CASE ( 'wsa' )
	2066	IF ( .NOT. ocean ) THEN
[215]	2067	message_string = 'data_output_pr = ' // &
	2068	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2069	'lemented for ocean = .FALSE.'
[226]	2070	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2071	ELSE
	2072	dopr_index(i) = 66
	2073	dopr_unit(i) = 'psu m/s'
	2074	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2075	ENDIF
	2076
	2077	CASE ( 'wsa' )
	2078	IF ( .NOT. ocean ) THEN
[215]	2079	message_string = 'data_output_pr = ' // &
	2080	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2081	'lemented for ocean = .FALSE.'
[226]	2082	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2083	ELSE
	2084	dopr_index(i) = 67
	2085	dopr_unit(i) = 'psu m/s'
	2086	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2087	ENDIF
	2088
[106]	2089	CASE ( 'wp' )
	2090	dopr_index(i) = 68
	2091	dopr_unit(i) = 'm3/s3'
	2092	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2093
[106]	2094	CASE ( 'w"e' )
	2095	dopr_index(i) = 69
	2096	dopr_unit(i) = 'm3/s3'
	2097	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2098
[197]	2099	CASE ( 'q*2' )
	2100	IF ( .NOT. humidity ) THEN
[215]	2101	message_string = 'data_output_pr = ' // &
	2102	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2103	'lemented for humidity = .FALSE.'
[226]	2104	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2105	ELSE
	2106	dopr_index(i) = 70
	2107	dopr_unit(i) = 'kg2/kg2'
	2108	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2109	ENDIF
[106]	2110
[1]	2111	CASE DEFAULT
[87]	2112
	2113	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2114
	2115	IF ( unit == 'illegal' ) THEN
[215]	2116	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2117	message_string = 'illegal value for data_output_pr or ' // &
	2118	'data_output_pr_user = "' // &
	2119	TRIM( data_output_pr(i) ) // '"'
[226]	2120	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2121	ELSE
	2122	message_string = 'illegal value for data_output_pr = "' // &
	2123	TRIM( data_output_pr(i) ) // '"'
[226]	2124	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2125	ENDIF
[1]	2126	ENDIF
	2127
	2128	END SELECT
	2129	!
	2130	!-- Check to which of the predefined coordinate systems the profile belongs
	2131	DO k = 1, crmax
	2132	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2133	/=0 ) &
	2134	THEN
	2135	dopr_crossindex(i) = k
	2136	EXIT
	2137	ENDIF
	2138	ENDDO
	2139	!
	2140	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2141	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2142	!-- control characters
	2143	dopr_label(i) = data_output_pr(i)
	2144	position = INDEX( dopr_label(i) , '"' )
	2145	DO WHILE ( position /= 0 )
	2146	dopr_label(i)(position:position) = ''''
	2147	position = INDEX( dopr_label(i) , '"' )
	2148	ENDDO
	2149
	2150	ENDDO
	2151
	2152	!
	2153	!-- y-value range of the coordinate system (PROFIL).
	2154	!-- x-value range determined in plot_1d.
[94]	2155	IF ( .NOT. ocean ) THEN
	2156	cross_uymin = 0.0
	2157	IF ( z_max_do1d == -1.0 ) THEN
	2158	cross_uymax = zu(nzt+1)
	2159	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2160	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2161	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2162	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2163	ELSE
	2164	cross_uymax = z_max_do1d
	2165	ENDIF
[1]	2166	ENDIF
	2167
	2168	!
	2169	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2170	!-- permissible
	2171	DO i = 1, crmax
	2172	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2173
	2174	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2175	j = 0
	2176
	2177	CASE DEFAULT
[215]	2178	message_string = 'unknown normalization method cross_normali' // &
	2179	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2180	'"'
[226]	2181	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2182
	2183	END SELECT
	2184	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2185
	2186	CASE ( '', 'z_i' )
	2187	j = 0
	2188
	2189	CASE DEFAULT
[215]	2190	message_string = 'unknown normalization method cross_normali' // &
	2191	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2192	'"'
[226]	2193	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2194
	2195	END SELECT
	2196	ENDDO
	2197	!
	2198	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2199	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2200	THEN
[215]	2201	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2202	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2203	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2204	ENDIF
	2205
	2206
	2207	!
	2208	!-- Append user-defined data output variables to the standard data output
	2209	IF ( data_output_user(1) /= ' ' ) THEN
	2210	i = 1
	2211	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2212	i = i + 1
	2213	ENDDO
	2214	j = 1
	2215	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2216	IF ( i > 100 ) THEN
[215]	2217	message_string = 'number of output quantitities given by data' // &
	2218	'_output and data_output_user exceeds the limit of 100'
[226]	2219	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2220	ENDIF
	2221	data_output(i) = data_output_user(j)
	2222	i = i + 1
	2223	j = j + 1
	2224	ENDDO
	2225	ENDIF
	2226
	2227	!
	2228	!-- Check and set steering parameters for 2d/3d data output and averaging
	2229	i = 1
	2230	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2231	!
	2232	!-- Check for data averaging
	2233	ilen = LEN_TRIM( data_output(i) )
	2234	j = 0 ! no data averaging
	2235	IF ( ilen > 3 ) THEN
	2236	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2237	j = 1 ! data averaging
	2238	data_output(i) = data_output(i)(1:ilen-3)
	2239	ENDIF
	2240	ENDIF
	2241	!
	2242	!-- Check for cross section or volume data
	2243	ilen = LEN_TRIM( data_output(i) )
	2244	k = 0 ! 3d data
	2245	var = data_output(i)(1:ilen)
	2246	IF ( ilen > 3 ) THEN
	2247	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2248	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2249	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2250	k = 1 ! 2d data
	2251	var = data_output(i)(1:ilen-3)
	2252	ENDIF
	2253	ENDIF
	2254	!
	2255	!-- Check for allowed value and set units
	2256	SELECT CASE ( TRIM( var ) )
	2257
	2258	CASE ( 'e' )
	2259	IF ( constant_diffusion ) THEN
[215]	2260	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2261	'res constant_diffusion = .FALSE.'
[226]	2262	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2263	ENDIF
	2264	unit = 'm2/s2'
	2265
	2266	CASE ( 'pc', 'pr' )
	2267	IF ( .NOT. particle_advection ) THEN
[215]	2268	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2269	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2270	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2271	ENDIF
	2272	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2273	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2274
	2275	CASE ( 'q', 'vpt' )
[75]	2276	IF ( .NOT. humidity ) THEN
[215]	2277	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2278	'res humidity = .TRUE.'
[226]	2279	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2280	ENDIF
	2281	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2282	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2283
	2284	CASE ( 'ql' )
	2285	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2286	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2287	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2288	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2289	ENDIF
	2290	unit = 'kg/kg'
	2291
	2292	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2293	IF ( .NOT. cloud_droplets ) THEN
[215]	2294	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2295	'res cloud_droplets = .TRUE.'
[226]	2296	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2297	ENDIF
	2298	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2299	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2300	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2301
	2302	CASE ( 'qv' )
	2303	IF ( .NOT. cloud_physics ) THEN
[215]	2304	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2305	'res cloud_physics = .TRUE.'
[226]	2306	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2307	ENDIF
	2308	unit = 'kg/kg'
	2309
[96]	2310	CASE ( 'rho' )
	2311	IF ( .NOT. ocean ) THEN
[215]	2312	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2313	'res ocean = .TRUE.'
[226]	2314	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2315	ENDIF
	2316	unit = 'kg/m3'
	2317
[1]	2318	CASE ( 's' )
	2319	IF ( .NOT. passive_scalar ) THEN
[215]	2320	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2321	'res passive_scalar = .TRUE.'
[226]	2322	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2323	ENDIF
	2324	unit = 'conc'
	2325
[96]	2326	CASE ( 'sa' )
	2327	IF ( .NOT. ocean ) THEN
[215]	2328	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2329	'res ocean = .TRUE.'
[226]	2330	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2331	ENDIF
	2332	unit = 'psu'
	2333
[72]	2334	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
[1]	2335	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2336	message_string = 'illegal value for data_output: "' // &
	2337	TRIM( var ) // '" & only 2d-horizontal ' // &
	2338	'cross sections are allowed for this value'
[226]	2339	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2340	ENDIF
	2341	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2342	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2343	'res cloud_physics = .TRUE.'
[226]	2344	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2345	ENDIF
[72]	2346	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2347	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2348	'res precipitation = .TRUE.'
[226]	2349	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2350	ENDIF
	2351	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2352	message_string = 'temporal averaging of precipitation ' // &
	2353	'amount "' // TRIM( var ) // '" is not possible'
[226]	2354	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2355	ENDIF
	2356	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2357	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2358	'res precipitation = .TRUE.'
[226]	2359	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2360	ENDIF
	2361
	2362
[1]	2363	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2364	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2365	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
[72]	2366	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2367	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2368	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[1]	2369
	2370	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2371	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2372	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2373	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2374	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2375	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2376	CONTINUE
	2377
	2378	CASE DEFAULT
	2379	CALL user_check_data_output( var, unit )
	2380
	2381	IF ( unit == 'illegal' ) THEN
[215]	2382	IF ( data_output_user(1) /= ' ' ) THEN
	2383	message_string = 'illegal value for data_output or ' // &
	2384	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2385	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2386	ELSE
	2387	message_string = 'illegal value for data_output =' // &
	2388	TRIM( data_output(i) ) // '"'
[226]	2389	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2390	ENDIF
	2391	ENDIF
	2392
	2393	END SELECT
	2394	!
	2395	!-- Set the internal steering parameters appropriately
	2396	IF ( k == 0 ) THEN
	2397	do3d_no(j) = do3d_no(j) + 1
	2398	do3d(j,do3d_no(j)) = data_output(i)
	2399	do3d_unit(j,do3d_no(j)) = unit
	2400	ELSE
	2401	do2d_no(j) = do2d_no(j) + 1
	2402	do2d(j,do2d_no(j)) = data_output(i)
	2403	do2d_unit(j,do2d_no(j)) = unit
	2404	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2405	data_output_xy(j) = .TRUE.
	2406	ENDIF
	2407	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2408	data_output_xz(j) = .TRUE.
	2409	ENDIF
	2410	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2411	data_output_yz(j) = .TRUE.
	2412	ENDIF
	2413	ENDIF
	2414
	2415	IF ( j == 1 ) THEN
	2416	!
	2417	!-- Check, if variable is already subject to averaging
	2418	found = .FALSE.
	2419	DO k = 1, doav_n
	2420	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2421	ENDDO
	2422
	2423	IF ( .NOT. found ) THEN
	2424	doav_n = doav_n + 1
	2425	doav(doav_n) = var
	2426	ENDIF
	2427	ENDIF
	2428
	2429	i = i + 1
	2430	ENDDO
	2431
	2432	!
	2433	!-- Store sectional planes in one shared array
	2434	section(:,1) = section_xy
	2435	section(:,2) = section_xz
	2436	section(:,3) = section_yz
	2437
	2438	!
	2439	!-- Upper plot limit (grid point value) for 1D profiles
	2440	IF ( z_max_do1d == -1.0 ) THEN
	2441	nz_do1d = nzt+1
	2442	ELSE
	2443	DO k = nzb+1, nzt+1
	2444	nz_do1d = k
	2445	IF ( zw(k) > z_max_do1d ) EXIT
	2446	ENDDO
	2447	ENDIF
	2448
	2449	!
	2450	!-- Upper plot limit for 2D vertical sections
	2451	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2452	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2453	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2454	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2455	' (zu(nzt))'
[226]	2456	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2457	ENDIF
	2458
	2459	!
	2460	!-- Upper plot limit for 3D arrays
	2461	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2462
	2463	!
	2464	!-- Determine and check accuracy for compressed 3D plot output
	2465	IF ( do3d_compress ) THEN
	2466	!
	2467	!-- Compression only permissible on T3E machines
	2468	IF ( host(1:3) /= 't3e' ) THEN
[215]	2469	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2470	TRIM( host ) // '"'
[226]	2471	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2472	ENDIF
	2473
	2474	i = 1
	2475	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2476
	2477	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2478	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2479	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2480	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2481	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2482	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2483	ENDIF
	2484
	2485	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2486	var = do3d_comp_prec(i)(1:ilen-1)
	2487
	2488	SELECT CASE ( var )
	2489
	2490	CASE ( 'u' )
	2491	j = 1
	2492	CASE ( 'v' )
	2493	j = 2
	2494	CASE ( 'w' )
	2495	j = 3
	2496	CASE ( 'p' )
	2497	j = 4
	2498	CASE ( 'pt' )
	2499	j = 5
	2500
	2501	CASE DEFAULT
[215]	2502	WRITE( message_string, * ) 'unknown variable "', &
	2503	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2504	i, ')'
[226]	2505	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2506
	2507	END SELECT
	2508
	2509	plot_3d_precision(j)%precision = prec
	2510	i = i + 1
	2511
	2512	ENDDO
	2513	ENDIF
	2514
	2515	!
	2516	!-- Check the data output format(s)
	2517	IF ( data_output_format(1) == ' ' ) THEN
	2518	!
	2519	!-- Default value
	2520	netcdf_output = .TRUE.
	2521	ELSE
	2522	i = 1
	2523	DO WHILE ( data_output_format(i) /= ' ' )
	2524
	2525	SELECT CASE ( data_output_format(i) )
	2526
	2527	CASE ( 'netcdf' )
	2528	netcdf_output = .TRUE.
	2529	CASE ( 'iso2d' )
	2530	iso2d_output = .TRUE.
	2531	CASE ( 'profil' )
	2532	profil_output = .TRUE.
	2533	CASE ( 'avs' )
	2534	avs_output = .TRUE.
	2535
	2536	CASE DEFAULT
[215]	2537	message_string = 'unknown value for data_output_format "' // &
	2538	TRIM( data_output_format(i) ) // '"'
[226]	2539	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2540
	2541	END SELECT
	2542
	2543	i = i + 1
	2544	IF ( i > 10 ) EXIT
	2545
	2546	ENDDO
	2547
	2548	ENDIF
	2549
	2550	!
	2551	!-- Check netcdf precison
	2552	ldum = .FALSE.
	2553	CALL define_netcdf_header( 'ch', ldum, 0 )
	2554
	2555	!
	2556	!-- Check, whether a constant diffusion coefficient shall be used
	2557	IF ( km_constant /= -1.0 ) THEN
	2558	IF ( km_constant < 0.0 ) THEN
[215]	2559	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2560	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2561	ELSE
	2562	IF ( prandtl_number < 0.0 ) THEN
[215]	2563	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2564	' < 0.0'
[226]	2565	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2566	ENDIF
	2567	constant_diffusion = .TRUE.
	2568
	2569	IF ( prandtl_layer ) THEN
[215]	2570	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2571	'value of km'
[226]	2572	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2573	ENDIF
	2574	ENDIF
	2575	ENDIF
	2576
	2577	!
	2578	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2579	!-- for the horizontal diffusivity used within the outflow damping layer,
	2580	!-- and check/set the width of the damping layer
	2581	IF ( bc_lr /= 'cyclic' ) THEN
	2582	IF ( km_damp_max == -1.0 ) THEN
	2583	km_damp_max = 0.5 * dx
	2584	ENDIF
	2585	IF ( outflow_damping_width == -1.0 ) THEN
	2586	outflow_damping_width = MIN( 20, nx/2 )
	2587	ENDIF
	2588	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2589	message_string = 'outflow_damping width out of range'
[226]	2590	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2591	ENDIF
	2592	ENDIF
	2593
	2594	IF ( bc_ns /= 'cyclic' ) THEN
	2595	IF ( km_damp_max == -1.0 ) THEN
	2596	km_damp_max = 0.5 * dy
	2597	ENDIF
	2598	IF ( outflow_damping_width == -1.0 ) THEN
	2599	outflow_damping_width = MIN( 20, ny/2 )
	2600	ENDIF
	2601	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2602	message_string = 'outflow_damping width out of range'
[226]	2603	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2604	ENDIF
	2605	ENDIF
	2606
	2607	!
	2608	!-- Check value range for rif
	2609	IF ( rif_min >= rif_max ) THEN
[215]	2610	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2611	'than rif_max = ', rif_max
[226]	2612	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2613	ENDIF
	2614
	2615	!
	2616	!-- Determine upper and lower hight level indices for random perturbations
[97]	2617	IF ( disturbance_level_b == -9999999.9 ) THEN
	2618	IF ( ocean ) THEN
	2619	disturbance_level_b = zu((nzt*2)/3)
	2620	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2621	ELSE
	2622	disturbance_level_b = zu(nzb+3)
	2623	disturbance_level_ind_b = nzb + 3
	2624	ENDIF
[1]	2625	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2626	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2627	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2628	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2629	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2630	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2631	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2632	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2633	ELSE
	2634	DO k = 3, nzt-2
	2635	IF ( disturbance_level_b <= zu(k) ) THEN
	2636	disturbance_level_ind_b = k
	2637	EXIT
	2638	ENDIF
	2639	ENDDO
	2640	ENDIF
	2641
[97]	2642	IF ( disturbance_level_t == -9999999.9 ) THEN
	2643	IF ( ocean ) THEN
	2644	disturbance_level_t = zu(nzt-3)
	2645	disturbance_level_ind_t = nzt - 3
	2646	ELSE
	2647	disturbance_level_t = zu(nzt/3)
	2648	disturbance_level_ind_t = nzt / 3
	2649	ENDIF
[1]	2650	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2651	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2652	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2653	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2654	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2655	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2656	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2657	disturbance_level_b
[226]	2658	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2659	ELSE
	2660	DO k = 3, nzt-2
	2661	IF ( disturbance_level_t <= zu(k) ) THEN
	2662	disturbance_level_ind_t = k
	2663	EXIT
	2664	ENDIF
	2665	ENDDO
	2666	ENDIF
	2667
	2668	!
	2669	!-- Check again whether the levels determined this way are ok.
	2670	!-- Error may occur at automatic determination and too few grid points in
	2671	!-- z-direction.
	2672	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2673	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2674	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2675	disturbance_level_b
[226]	2676	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2677	ENDIF
	2678
	2679	!
	2680	!-- Determine the horizontal index range for random perturbations.
	2681	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2682	!-- near the inflow and the perturbation area is further limited to ...(1)
	2683	!-- after the initial phase of the flow.
	2684	dist_nxl = 0; dist_nxr = nx
	2685	dist_nys = 0; dist_nyn = ny
	2686	IF ( bc_lr /= 'cyclic' ) THEN
	2687	IF ( inflow_disturbance_begin == -1 ) THEN
	2688	inflow_disturbance_begin = MIN( 10, nx/2 )
	2689	ENDIF
	2690	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2691	THEN
[215]	2692	message_string = 'inflow_disturbance_begin out of range'
[226]	2693	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2694	ENDIF
	2695	IF ( inflow_disturbance_end == -1 ) THEN
	2696	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2697	ENDIF
	2698	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2699	THEN
[215]	2700	message_string = 'inflow_disturbance_end out of range'
[226]	2701	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2702	ENDIF
	2703	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2704	IF ( inflow_disturbance_begin == -1 ) THEN
	2705	inflow_disturbance_begin = MIN( 10, ny/2 )
	2706	ENDIF
	2707	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2708	THEN
[215]	2709	message_string = 'inflow_disturbance_begin out of range'
[226]	2710	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2711	ENDIF
	2712	IF ( inflow_disturbance_end == -1 ) THEN
	2713	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2714	ENDIF
	2715	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2716	THEN
[215]	2717	message_string = 'inflow_disturbance_end out of range'
[226]	2718	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2719	ENDIF
	2720	ENDIF
	2721
[73]	2722	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2723	dist_nxr = nx - inflow_disturbance_begin
	2724	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2725	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2726	dist_nxl = inflow_disturbance_begin
	2727	dist_nxr(1) = inflow_disturbance_end
[73]	2728	ENDIF
	2729	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2730	dist_nyn = ny - inflow_disturbance_begin
	2731	dist_nys(1) = ny - inflow_disturbance_end
[73]	2732	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2733	dist_nys = inflow_disturbance_begin
	2734	dist_nyn(1) = inflow_disturbance_end
	2735	ENDIF
	2736
	2737	!
[151]	2738	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2739	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2740	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2741	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2742	'condition at the inflow boundary'
[226]	2743	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2744	ENDIF
	2745
	2746	!
	2747	!-- In case of turbulent inflow calculate the index of the recycling plane
	2748	IF ( turbulent_inflow ) THEN
	2749	IF ( recycling_width == 9999999.9 ) THEN
	2750	!
	2751	!-- Set the default value for the width of the recycling domain
	2752	recycling_width = 0.1 * nx * dx
	2753	ELSE
	2754	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2755	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2756	' ', recycling_width
[226]	2757	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	2758	ENDIF
	2759	ENDIF
	2760	!
	2761	!-- Calculate the index
	2762	recycling_plane = recycling_width / dx
	2763	ENDIF
	2764
	2765	!
[1]	2766	!-- Check random generator
	2767	IF ( random_generator /= 'system-specific' .AND. &
	2768	random_generator /= 'numerical-recipes' ) THEN
[215]	2769	message_string = 'unknown random generator: random_generator = "' // &
	2770	TRIM( random_generator ) // '"'
[226]	2771	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2772	ENDIF
	2773
	2774	!
	2775	!-- Determine damping level index for 1D model
	2776	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2777	IF ( damp_level_1d == -1.0 ) THEN
	2778	damp_level_1d = zu(nzt+1)
	2779	damp_level_ind_1d = nzt + 1
	2780	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2781	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2782	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	2783	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	2784	ELSE
	2785	DO k = 1, nzt+1
	2786	IF ( damp_level_1d <= zu(k) ) THEN
	2787	damp_level_ind_1d = k
	2788	EXIT
	2789	ENDIF
	2790	ENDDO
	2791	ENDIF
	2792	ENDIF
[215]	2793
[1]	2794	!
	2795	!-- Check some other 1d-model parameters
	2796	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2797	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2798	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2799	'" is unknown'
[226]	2800	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2801	ENDIF
	2802	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2803	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2804	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2805	'" is unknown'
[226]	2806	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2807	ENDIF
	2808
	2809	!
	2810	!-- Set time for the next user defined restart (time_restart is the
	2811	!-- internal parameter for steering restart events)
	2812	IF ( restart_time /= 9999999.9 ) THEN
	2813	IF ( restart_time > simulated_time ) time_restart = restart_time
	2814	ELSE
	2815	!
	2816	!-- In case of a restart run, set internal parameter to default (no restart)
	2817	!-- if the NAMELIST-parameter restart_time is omitted
	2818	time_restart = 9999999.9
	2819	ENDIF
	2820
	2821	!
	2822	!-- Set default value of the time needed to terminate a model run
	2823	IF ( termination_time_needed == -1.0 ) THEN
	2824	IF ( host(1:3) == 'ibm' ) THEN
	2825	termination_time_needed = 300.0
	2826	ELSE
	2827	termination_time_needed = 35.0
	2828	ENDIF
	2829	ENDIF
	2830
	2831	!
	2832	!-- Check the time needed to terminate a model run
	2833	IF ( host(1:3) == 't3e' ) THEN
	2834	!
	2835	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2836	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2837	IF ( termination_time_needed <= 30.0 ) THEN
[215]	2838	WRITE( message_string, * ) 'termination_time_needed = ', &
	2839	termination_time_needed, ' must be > 30.0 on host "', &
	2840	TRIM( host ), '"'
[226]	2841	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	2842	ENDIF
	2843	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2844	!
	2845	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2846	!-- because the job time consumed before executing palm (for compiling,
	2847	!-- copying of files, etc.) has to be regarded
	2848	IF ( termination_time_needed < 300.0 ) THEN
[215]	2849	WRITE( message_string, * ) 'termination_time_needed = ', &
	2850	termination_time_needed, ' should be >= 300.0 on host "', &
	2851	TRIM( host ), '"'
[226]	2852	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	2853	ENDIF
	2854	ENDIF
	2855
[217]	2856	!
[240]	2857	!-- Check pressure gradient conditions
	2858	IF ( dp_external .AND. conserve_volume_flow ) THEN
	2859	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
	2860	' are .TRUE. but one of them must be .FALSE.'
	2861	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	2862	ENDIF
	2863	IF ( dp_external ) THEN
	2864	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	2865	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	2866	' of range'
	2867	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	2868	ENDIF
	2869	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
	2870	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
	2871	', i.e. the external pressure gradient & will not be applied'
	2872	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	2873	ENDIF
	2874	ENDIF
	2875	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	2876	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	2877	'.FALSE., i.e. the external pressure gradient & will not be applied'
	2878	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	2879	ENDIF
[241]	2880	IF ( conserve_volume_flow ) THEN
	2881	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
	2882	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	2883	conserve_volume_flow_mode = 'inflow_profile'
	2884	ELSE
	2885	conserve_volume_flow_mode = 'initial_profiles'
	2886	ENDIF
	2887	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	2888	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	2889	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	2890	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	2891	conserve_volume_flow_mode
	2892	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	2893	ENDIF
	2894	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
	2895	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
	2896	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
	2897	'require & conserve_volume_flow_mode = ''inflow_profile'''
	2898	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	2899	ENDIF
	2900	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	2901	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	2902	WRITE( message_string, * ) 'cyclic boundary conditions ', &
	2903	'require & conserve_volume_flow_mode = ''initial_profiles''', &
	2904	' or ''bulk_velocity'''
	2905	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	2906	ENDIF
	2907	ENDIF
	2908	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	2909	( .NOT. conserve_volume_flow .OR. &
	2910	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	2911	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
	2912	'conserve_volume_flow = .T. and & ', &
	2913	'conserve_volume_flow_mode = ''bulk_velocity'''
	2914	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	2915	ENDIF
[240]	2916
	2917	!
[217]	2918	!-- Check &userpar parameters
	2919	CALL user_check_parameters
[1]	2920
[217]	2921
[1]	2922	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |