Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 251

Last change on this file since 251 was 241, checked in by letzel, 16 years ago
Option to predefine a target bulk velocity for conserve_volume_flow
Property svn:keywords set to `Id`
File size: 112.2 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[232]	6	! Bugfix: pressure included for profile output
[240]	7	! Check pressure gradient conditions
[226]	8	!
	9	! Former revisions:
	10	! -----------------
	11	! $Id: check_parameters.f90 241 2009-02-19 16:08:56Z raasch $
	12	!
	13	! 222 2009-01-12 16:04:16Z letzel
[217]	14	! +user_check_parameters
[213]	15	! Output of messages replaced by message handling routine.
[206]	16	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	17	! deleted __mpi2 directives
[222]	18	! Check that PALM is called with mrun -K parallel for coupling
[198]	19	!
	20	! 197 2008-09-16 15:29:03Z raasch
[177]	21	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	22	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	23	!
	24	! Strict grid matching along z is not needed for mg-solver.
[153]	25	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	26	! Case of reading data for recycling included in initializing_actions,
[197]	27	! check of turbulent_inflow and calculation of recycling_plane.
	28	! q*2 profile added
[139]	29	!
	30	! 138 2007-11-28 10:03:58Z letzel
[138]	31	! Plant canopy added
[132]	32	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	33	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	34	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	35	!
	36	! 109 2007-08-28 15:26:47Z letzel
[102]	37	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	38	! conditions for temperature and fluxes) in case of coupled runs.
	39	! +profiles for wp and w"e
[104]	40	! Bugfix: Error message concerning output of particle concentration (pc)
	41	! modified
[108]	42	! More checks and more default values for coupled runs
	43	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	44	! cloud_physics = .T.)
	45	! Rayleigh damping for ocean fixed.
[109]	46	! Check and, if necessary, set default value for dt_coupling
[98]	47	!
	48	! 97 2007-06-21 08:23:15Z raasch
[97]	49	! Initial salinity profile is calculated, salinity boundary conditions are
	50	! checked,
[94]	51	! z_max_do1d is checked only in case of ocean = .f.,
[97]	52	! +initial temperature and geostrophic velocity profiles for the ocean version,
	53	! use_pt_reference renamed use_reference
[77]	54	!
[90]	55	! 89 2007-05-25 12:08:31Z raasch
	56	! Check for user-defined profiles
	57	!
[77]	58	! 75 2007-03-22 09:54:05Z raasch
[51]	59	! "by_user" allowed as initializing action, -data_output_ts,
[63]	60	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	61	! and pt_reference are checked, moisture renamed humidity,
[72]	62	! output of precipitation amount/rate and roughnes length + check
[73]	63	! possible negative humidities are avoided in initial profile,
[75]	64	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	65	! revision added to run_description_header
[1]	66	!
[39]	67	! 20 2007-02-26 00:12:32Z raasch
	68	! Temperature and humidity gradients at top are now calculated for nzt+1,
	69	! top_heatflux and respective boundary condition bc_pt_t is checked
	70	!
[3]	71	! RCS Log replace by Id keyword, revision history cleaned up
	72	!
[1]	73	! Revision 1.61 2006/08/04 14:20:25 raasch
	74	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	75	! use_upstream_for_tke, default value for dt_dopts,
	76	! generation of file header moved from routines palm and header to here
	77	!
	78	! Revision 1.1 1997/08/26 06:29:23 raasch
	79	! Initial revision
	80	!
	81	!
	82	! Description:
	83	! ------------
	84	! Check control parameters and deduce further quantities.
	85	!------------------------------------------------------------------------------!
	86
	87	USE arrays_3d
	88	USE constants
	89	USE control_parameters
	90	USE grid_variables
	91	USE indices
	92	USE model_1d
	93	USE netcdf_control
	94	USE particle_attributes
	95	USE pegrid
	96	USE profil_parameter
	97	USE statistics
	98	USE transpose_indices
	99
	100	IMPLICIT NONE
	101
	102	CHARACTER (LEN=1) :: sq
	103	CHARACTER (LEN=6) :: var
	104	CHARACTER (LEN=7) :: unit
	105	CHARACTER (LEN=8) :: date
	106	CHARACTER (LEN=10) :: time
[102]	107	CHARACTER (LEN=40) :: coupling_string
[1]	108	CHARACTER (LEN=100) :: action
	109
[108]	110	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	111	position, prec
[1]	112	LOGICAL :: found, ldum
[108]	113	REAL :: gradient, maxn, maxp, remote = 0.0
[1]	114
	115	!
	116	!-- Warning, if host is not set
	117	IF ( host(1:1) == ' ' ) THEN
[213]	118	message_string = '"host" is not set. Please check that environment ' // &
	119	'variable "localhost" & is set before running PALM'
[226]	120	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	121	ENDIF
	122
	123	!
[102]	124	!-- Check the coupling mode
	125	IF ( coupling_mode /= 'uncoupled' .AND. &
	126	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	127	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	128	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	129	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	130	ENDIF
	131
	132	!
[108]	133	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	134	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	135
[108]	136	IF ( dt_coupling == 9999999.9 ) THEN
[213]	137	message_string = 'dt_coupling is not set but required for coup' // &
	138	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	139	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	140	ENDIF
[213]	141
[206]	142	#if defined( __parallel )
	143	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	144	ierr )
	145	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	146	status, ierr )
[108]	147	IF ( dt_coupling /= remote ) THEN
[213]	148	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	149	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	150	'dt_coupling_remote = ', remote
[226]	151	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	152	ENDIF
[109]	153	IF ( dt_coupling <= 0.0 ) THEN
[206]	154	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	155	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	156	status, ierr )
[109]	157	dt_coupling = MAX( dt_max, remote )
[213]	158	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	159	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	160	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	161	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	162	ENDIF
[213]	163
[206]	164	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	165	ierr )
	166	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	167	status, ierr )
[108]	168	IF ( restart_time /= remote ) THEN
[213]	169	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	170	'": restart_time = ', restart_time, '& is not equal to ', &
	171	'restart_time_remote = ', remote
[226]	172	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	173	ENDIF
[213]	174
[206]	175	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	176	ierr )
	177	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	178	status, ierr )
[108]	179	IF ( dt_restart /= remote ) THEN
[213]	180	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	181	'": dt_restart = ', dt_restart, '& is not equal to ', &
	182	'dt_restart_remote = ', remote
[226]	183	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	184	ENDIF
[213]	185
[206]	186	CALL MPI_SEND( end_time, 1, MPI_REAL, target_id, 14, comm_inter, ierr )
	187	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	188	status, ierr )
[108]	189	IF ( end_time /= remote ) THEN
[213]	190	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	191	'": end_time = ', end_time, '& is not equal to ', &
	192	'end_time_remote = ', remote
[226]	193	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	194	ENDIF
[213]	195
[206]	196	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	197	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	198	status, ierr )
[108]	199	IF ( dx /= remote ) THEN
[213]	200	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	201	'": dx = ', dx, '& is not equal to dx_remote = ', remote
[226]	202	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
[108]	203	ENDIF
[213]	204
[206]	205	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	206	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	207	status, ierr )
[108]	208	IF ( dy /= remote ) THEN
[213]	209	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	210	'": dy = ', dy, '& is not equal to dy_remote = ', remote
[226]	211	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
[108]	212	ENDIF
[213]	213
[206]	214	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	215	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	216	status, ierr )
[108]	217	IF ( nx /= iremote ) THEN
[213]	218	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	219	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
[226]	220	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
[108]	221	ENDIF
[213]	222
[206]	223	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	224	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	225	status, ierr )
[108]	226	IF ( ny /= iremote ) THEN
[213]	227	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	228	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
[226]	229	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
[108]	230	ENDIF
[222]	231	#else
	232	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	233	' ''mrun -K parallel'''
[226]	234	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	235	#endif
	236	ENDIF
	237
[206]	238	#if defined( __parallel )
[108]	239	!
	240	!-- Exchange via intercommunicator
	241	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	242	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	243	ierr )
[108]	244	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	245	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	246	comm_inter, status, ierr )
[108]	247	ENDIF
	248	#endif
	249
	250
	251	!
[1]	252	!-- Generate the file header which is used as a header for most of PALM's
	253	!-- output files
	254	CALL DATE_AND_TIME( date, time )
	255	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	256	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	257	IF ( coupling_mode == 'uncoupled' ) THEN
	258	coupling_string = ''
	259	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	260	coupling_string = ' coupled (atmosphere)'
	261	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	262	coupling_string = ' coupled (ocean)'
	263	ENDIF
[1]	264
[102]	265	WRITE ( run_description_header, &
	266	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	267	TRIM( version ), TRIM( revision ), 'run: ', &
	268	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	269	'host: ', TRIM( host ), run_date, run_time
[1]	270
	271	!
[63]	272	!-- Check the general loop optimization method
	273	IF ( loop_optimization == 'default' ) THEN
	274	IF ( host(1:3) == 'nec' ) THEN
	275	loop_optimization = 'vector'
	276	ELSE
	277	loop_optimization = 'cache'
	278	ENDIF
	279	ENDIF
	280	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	281	.AND. loop_optimization /= 'vector' ) THEN
[213]	282	message_string = 'illegal value given for loop_optimization: "' // &
	283	TRIM( loop_optimization ) // '"'
[226]	284	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	285	ENDIF
	286
	287	!
[1]	288	!-- Check topography setting (check for illegal parameter combinations)
	289	IF ( topography /= 'flat' ) THEN
	290	action = ' '
	291	IF ( scalar_advec /= 'pw-scheme' ) THEN
	292	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	293	ENDIF
	294	IF ( momentum_advec /= 'pw-scheme' ) THEN
	295	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	296	ENDIF
[51]	297	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	298	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	299	ENDIF
[114]	300	IF ( psolver == 'sor' ) THEN
[1]	301	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	302	ENDIF
	303	IF ( sloping_surface ) THEN
	304	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	305	ENDIF
	306	IF ( galilei_transformation ) THEN
	307	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	308	ENDIF
	309	IF ( cloud_physics ) THEN
	310	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	311	ENDIF
	312	IF ( cloud_droplets ) THEN
	313	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	314	ENDIF
[75]	315	IF ( humidity ) THEN
	316	WRITE( action, '(A)' ) 'humidity = .TRUE.'
[1]	317	ENDIF
	318	IF ( .NOT. prandtl_layer ) THEN
	319	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	320	ENDIF
	321	IF ( action /= ' ' ) THEN
[213]	322	message_string = 'a non-flat topography does not allow ' // &
	323	TRIM( action )
[226]	324	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	325	ENDIF
	326	ENDIF
[94]	327
[1]	328	!
[94]	329	!-- Check ocean setting
	330	IF ( ocean ) THEN
	331	action = ' '
	332	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	333	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	334	ENDIF
[97]	335	IF ( momentum_advec == 'ups-scheme' ) THEN
	336	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	337	ENDIF
[94]	338	IF ( action /= ' ' ) THEN
[213]	339	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	340	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	341	ENDIF
	342	ENDIF
	343
	344	!
[1]	345	!-- Check whether there are any illegal values
	346	!-- Pressure solver:
	347	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	348	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	349	message_string = 'unknown solver for perturbation pressure: psolver' // &
	350	' = "' // TRIM( psolver ) // '"'
[226]	351	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	352	ENDIF
	353
	354	#if defined( __parallel )
	355	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	356	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	357	'for a 1d domain-decomposition along x & please do' // &
	358	' not set npey/=1 in the parameter file'
[226]	359	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	360	ENDIF
[181]	361	IF ( psolver == 'poisfft_hybrid' .AND. &
	362	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	363	psolver == 'multigrid' .AND. &
	364	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	365	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	366	'work for subdomains with unequal size & please ' // &
	367	'set grid_matching = ''strict'' in the parameter file'
[226]	368	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	369	ENDIF
	370	#else
	371	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	372	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	373	' for a parallel environment'
[226]	374	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	375	ENDIF
	376	#endif
	377
	378	IF ( psolver == 'multigrid' ) THEN
	379	IF ( cycle_mg == 'w' ) THEN
	380	gamma_mg = 2
	381	ELSEIF ( cycle_mg == 'v' ) THEN
	382	gamma_mg = 1
	383	ELSE
[213]	384	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	385	TRIM( cycle_mg ) // '"'
[226]	386	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	387	ENDIF
	388	ENDIF
	389
	390	IF ( fft_method /= 'singleton-algorithm' .AND. &
	391	fft_method /= 'temperton-algorithm' .AND. &
	392	fft_method /= 'system-specific' ) THEN
[213]	393	message_string = 'unknown fft-algorithm: fft_method = "' // &
	394	TRIM( fft_method ) // '"'
[226]	395	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	396	ENDIF
	397
	398	!
	399	!-- Advection schemes:
	400	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	401	THEN
[214]	402	message_string = 'unknown advection scheme: momentum_advec = "' // &
	403	TRIM( momentum_advec ) // '"'
[226]	404	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	405	ENDIF
	406	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	407	.AND. timestep_scheme /= 'euler' ) THEN
[214]	408	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	409	'" is not allowed with timestep_scheme = "' // &
	410	TRIM( timestep_scheme ) // '"'
[226]	411	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	412	ENDIF
	413
	414	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	415	scalar_advec /= 'ups-scheme' ) THEN
[214]	416	message_string = 'unknown advection scheme: scalar_advec = "' // &
	417	TRIM( scalar_advec ) // '"'
[226]	418	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	419	ENDIF
	420
	421	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	422	use_upstream_for_tke = .TRUE.
[214]	423	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	424	'use_sgs_for_particles = .TRUE.'
[226]	425	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	426	ENDIF
	427
	428	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	429	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	430	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	431	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	432	ENDIF
	433
	434	!
	435	!-- Timestep schemes:
	436	SELECT CASE ( TRIM( timestep_scheme ) )
	437
	438	CASE ( 'euler' )
	439	intermediate_timestep_count_max = 1
	440	asselin_filter_factor = 0.0
	441
	442	CASE ( 'leapfrog', 'leapfrog+euler' )
	443	intermediate_timestep_count_max = 1
	444
	445	CASE ( 'runge-kutta-2' )
	446	intermediate_timestep_count_max = 2
	447	asselin_filter_factor = 0.0
	448
	449	CASE ( 'runge-kutta-3' )
	450	intermediate_timestep_count_max = 3
	451	asselin_filter_factor = 0.0
	452
	453	CASE DEFAULT
[214]	454	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	455	TRIM( timestep_scheme ) // '"'
[226]	456	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	457
	458	END SELECT
	459
[63]	460	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	461	THEN
[214]	462	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	463	'" & does not work with timestep_scheme "' // &
	464	TRIM( timestep_scheme ) // '"'
[226]	465	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	466	ENDIF
	467
	468	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	469	THEN
[214]	470	message_string = 'momentum advection scheme "' // &
	471	TRIM( momentum_advec ) // '" & does not work with ' // &
	472	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	473	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	474	ENDIF
	475
[147]	476	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	477	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
[1]	478	!
[214]	479	!-- No restart run: several initialising actions are possible
[1]	480	action = initializing_actions
	481	DO WHILE ( TRIM( action ) /= '' )
	482	position = INDEX( action, ' ' )
	483	SELECT CASE ( action(1:position-1) )
	484
	485	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	486	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	487	action = action(position+1:)
	488
	489	CASE DEFAULT
[214]	490	message_string = 'initializing_action = "' // &
	491	TRIM( action ) // '" unkown or not allowed'
[226]	492	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	493
	494	END SELECT
	495	ENDDO
	496	ENDIF
[214]	497
[1]	498	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	499	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	500	message_string = 'initializing_actions = "set_constant_profiles"' // &
	501	' and "set_1d-model_profiles" are not allowed ' // &
	502	'simultaneously'
[226]	503	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	504	ENDIF
[214]	505
[46]	506	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	507	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	508	message_string = 'initializing_actions = "set_constant_profiles"' // &
	509	' and "by_user" are not allowed simultaneously'
[226]	510	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	511	ENDIF
[214]	512
[46]	513	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	514	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	515	message_string = 'initializing_actions = "by_user" and ' // &
	516	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	517	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	518	ENDIF
[1]	519
[75]	520	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	521	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	522	'not allowed with humidity = ', humidity
[226]	523	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	524	ENDIF
	525
[72]	526	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	527	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	528	'not allowed with cloud_physics = ', cloud_physics
[226]	529	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	530	ENDIF
	531
[75]	532	IF ( humidity .AND. sloping_surface ) THEN
[214]	533	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	534	'are not allowed simultaneously'
[226]	535	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	536	ENDIF
	537
[75]	538	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	539	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	540	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	541	ENDIF
	542
[75]	543	IF ( passive_scalar .AND. humidity ) THEN
[214]	544	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	545	'is not allowed simultaneously'
[226]	546	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	547	ENDIF
	548
	549	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	550	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	551	' = .TRUE.'
[226]	552	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	553	ENDIF
	554
	555	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	556	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	557	'" found for parameter grid_matching'
[226]	558	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	559	ENDIF
	560
[138]	561	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	562	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	563	'coefficient & given value is drag_coefficient = 0.0'
[226]	564	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	565	ENDIF
	566
[1]	567	!
	568	!-- In case of no model continuation run, check initialising parameters and
	569	!-- deduce further quantities
	570	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	571
	572	!
	573	!-- Initial profiles for 1D and 3D model, respectively
	574	u_init = ug_surface
	575	v_init = vg_surface
	576	pt_init = pt_surface
[94]	577	IF ( humidity ) q_init = q_surface
	578	IF ( ocean ) sa_init = sa_surface
	579	IF ( passive_scalar ) q_init = s_surface
[138]	580	IF ( plant_canopy ) lad = 0.0
[1]	581
	582	!
	583	!--
	584	!-- If required, compute initial profile of the geostrophic wind
	585	!-- (component ug)
	586	i = 1
	587	gradient = 0.0
[97]	588
	589	IF ( .NOT. ocean ) THEN
	590
	591	ug_vertical_gradient_level_ind(1) = 0
	592	ug(0) = ug_surface
	593	DO k = 1, nzt+1
[177]	594	IF ( i < 11 ) THEN
	595	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	596	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	597	gradient = ug_vertical_gradient(i) / 100.0
	598	ug_vertical_gradient_level_ind(i) = k - 1
	599	i = i + 1
[1]	600	ENDIF
[177]	601	ENDIF
[97]	602	IF ( gradient /= 0.0 ) THEN
	603	IF ( k /= 1 ) THEN
	604	ug(k) = ug(k-1) + dzu(k) * gradient
	605	ELSE
	606	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	607	ENDIF
[1]	608	ELSE
[97]	609	ug(k) = ug(k-1)
[1]	610	ENDIF
[97]	611	ENDDO
[1]	612
[97]	613	ELSE
	614
	615	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	616	ug(nzt+1) = ug_surface
[97]	617	DO k = nzt, 0, -1
[177]	618	IF ( i < 11 ) THEN
	619	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	620	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	621	gradient = ug_vertical_gradient(i) / 100.0
	622	ug_vertical_gradient_level_ind(i) = k + 1
	623	i = i + 1
[97]	624	ENDIF
	625	ENDIF
	626	IF ( gradient /= 0.0 ) THEN
	627	IF ( k /= nzt ) THEN
	628	ug(k) = ug(k+1) - dzu(k+1) * gradient
	629	ELSE
	630	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	631	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	632	ENDIF
	633	ELSE
	634	ug(k) = ug(k+1)
	635	ENDIF
	636	ENDDO
	637
	638	ENDIF
	639
[1]	640	u_init = ug
	641
	642	!
	643	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	644	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	645	ug_vertical_gradient_level(1) = 0.0
	646	ENDIF
	647
	648	!
	649	!--
	650	!-- If required, compute initial profile of the geostrophic wind
	651	!-- (component vg)
	652	i = 1
	653	gradient = 0.0
[97]	654
	655	IF ( .NOT. ocean ) THEN
	656
	657	vg_vertical_gradient_level_ind(1) = 0
	658	vg(0) = vg_surface
	659	DO k = 1, nzt+1
[177]	660	IF ( i < 11 ) THEN
	661	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	662	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	663	gradient = vg_vertical_gradient(i) / 100.0
	664	vg_vertical_gradient_level_ind(i) = k - 1
	665	i = i + 1
[1]	666	ENDIF
	667	ENDIF
[97]	668	IF ( gradient /= 0.0 ) THEN
	669	IF ( k /= 1 ) THEN
	670	vg(k) = vg(k-1) + dzu(k) * gradient
	671	ELSE
	672	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	673	ENDIF
[1]	674	ELSE
[97]	675	vg(k) = vg(k-1)
[1]	676	ENDIF
[97]	677	ENDDO
[1]	678
[97]	679	ELSE
	680
[121]	681	vg_vertical_gradient_level_ind(1) = nzt+1
	682	vg(nzt+1) = vg_surface
[97]	683	DO k = nzt, 0, -1
[177]	684	IF ( i < 11 ) THEN
	685	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	686	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	687	gradient = vg_vertical_gradient(i) / 100.0
	688	vg_vertical_gradient_level_ind(i) = k + 1
	689	i = i + 1
[97]	690	ENDIF
	691	ENDIF
	692	IF ( gradient /= 0.0 ) THEN
	693	IF ( k /= nzt ) THEN
	694	vg(k) = vg(k+1) - dzu(k+1) * gradient
	695	ELSE
	696	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	697	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	698	ENDIF
	699	ELSE
	700	vg(k) = vg(k+1)
	701	ENDIF
	702	ENDDO
	703
	704	ENDIF
	705
[1]	706	v_init = vg
	707
	708	!
	709	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	710	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	711	vg_vertical_gradient_level(1) = 0.0
	712	ENDIF
	713
	714	!
[94]	715	!-- Compute initial temperature profile using the given temperature gradients
[1]	716	i = 1
	717	gradient = 0.0
[94]	718
	719	IF ( .NOT. ocean ) THEN
	720
	721	pt_vertical_gradient_level_ind(1) = 0
	722	DO k = 1, nzt+1
[177]	723	IF ( i < 11 ) THEN
	724	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	725	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	726	gradient = pt_vertical_gradient(i) / 100.0
	727	pt_vertical_gradient_level_ind(i) = k - 1
	728	i = i + 1
[1]	729	ENDIF
	730	ENDIF
[94]	731	IF ( gradient /= 0.0 ) THEN
	732	IF ( k /= 1 ) THEN
	733	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	734	ELSE
	735	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	736	ENDIF
[1]	737	ELSE
[94]	738	pt_init(k) = pt_init(k-1)
[1]	739	ENDIF
[94]	740	ENDDO
[1]	741
[94]	742	ELSE
	743
	744	pt_vertical_gradient_level_ind(1) = nzt+1
	745	DO k = nzt, 0, -1
[177]	746	IF ( i < 11 ) THEN
	747	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	748	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	749	gradient = pt_vertical_gradient(i) / 100.0
	750	pt_vertical_gradient_level_ind(i) = k + 1
	751	i = i + 1
[94]	752	ENDIF
	753	ENDIF
	754	IF ( gradient /= 0.0 ) THEN
	755	IF ( k /= nzt ) THEN
	756	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	757	ELSE
	758	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	759	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	760	ENDIF
	761	ELSE
	762	pt_init(k) = pt_init(k+1)
	763	ENDIF
	764	ENDDO
	765
	766	ENDIF
	767
[1]	768	!
	769	!-- In case of no given temperature gradients, choose gradient of neutral
	770	!-- stratification
[94]	771	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	772	pt_vertical_gradient_level(1) = 0.0
	773	ENDIF
	774
	775	!
[94]	776	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	777	!-- boundary condition
[19]	778	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	779
	780	!
	781	!-- If required, compute initial humidity or scalar profile using the given
	782	!-- humidity/scalar gradient. In case of scalar transport, initially store
	783	!-- values of the scalar parameters on humidity parameters
	784	IF ( passive_scalar ) THEN
	785	bc_q_b = bc_s_b
	786	bc_q_t = bc_s_t
	787	q_surface = s_surface
	788	q_surface_initial_change = s_surface_initial_change
	789	q_vertical_gradient = s_vertical_gradient
	790	q_vertical_gradient_level = s_vertical_gradient_level
	791	surface_waterflux = surface_scalarflux
	792	ENDIF
	793
[75]	794	IF ( humidity .OR. passive_scalar ) THEN
[1]	795
	796	i = 1
	797	gradient = 0.0
	798	q_vertical_gradient_level_ind(1) = 0
	799	DO k = 1, nzt+1
[177]	800	IF ( i < 11 ) THEN
	801	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	802	q_vertical_gradient_level(i) >= 0.0 ) THEN
	803	gradient = q_vertical_gradient(i) / 100.0
	804	q_vertical_gradient_level_ind(i) = k - 1
	805	i = i + 1
[1]	806	ENDIF
	807	ENDIF
	808	IF ( gradient /= 0.0 ) THEN
	809	IF ( k /= 1 ) THEN
	810	q_init(k) = q_init(k-1) + dzu(k) * gradient
	811	ELSE
	812	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	813	ENDIF
	814	ELSE
	815	q_init(k) = q_init(k-1)
	816	ENDIF
[72]	817	!
	818	!-- Avoid negative humidities
	819	IF ( q_init(k) < 0.0 ) THEN
	820	q_init(k) = 0.0
	821	ENDIF
[1]	822	ENDDO
	823
	824	!
	825	!-- In case of no given humidity gradients, choose zero gradient
	826	!-- conditions
	827	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	828	q_vertical_gradient_level(1) = 0.0
	829	ENDIF
	830
	831	!
	832	!-- Store humidity gradient at the top boundary for possile Neumann
	833	!-- boundary condition
[19]	834	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	835
	836	ENDIF
	837
[94]	838	!
	839	!-- If required, compute initial salinity profile using the given salinity
	840	!-- gradients
	841	IF ( ocean ) THEN
	842
	843	i = 1
	844	gradient = 0.0
	845
	846	sa_vertical_gradient_level_ind(1) = nzt+1
	847	DO k = nzt, 0, -1
[177]	848	IF ( i < 11 ) THEN
	849	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	850	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	851	gradient = sa_vertical_gradient(i) / 100.0
	852	sa_vertical_gradient_level_ind(i) = k + 1
	853	i = i + 1
[94]	854	ENDIF
	855	ENDIF
	856	IF ( gradient /= 0.0 ) THEN
	857	IF ( k /= nzt ) THEN
	858	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	859	ELSE
	860	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	861	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	862	ENDIF
	863	ELSE
	864	sa_init(k) = sa_init(k+1)
	865	ENDIF
	866	ENDDO
	867
	868	ENDIF
	869
[138]	870	!
	871	!-- If required compute the profile of leaf area density used in the plant canopy model
	872	IF ( plant_canopy ) THEN
	873
	874	i = 1
	875	gradient = 0.0
[1]	876
[138]	877	IF ( .NOT. ocean ) THEN
[153]	878
	879	lad(0) = lad_surface
[138]	880
	881	lad_vertical_gradient_level_ind(1) = 0
	882	DO k = 1, pch_index
[177]	883	IF ( i < 11 ) THEN
	884	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	885	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	886	gradient = lad_vertical_gradient(i)
	887	lad_vertical_gradient_level_ind(i) = k - 1
	888	i = i + 1
[138]	889	ENDIF
	890	ENDIF
	891	IF ( gradient /= 0.0 ) THEN
	892	IF ( k /= 1 ) THEN
	893	lad(k) = lad(k-1) + dzu(k) * gradient
	894	ELSE
	895	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	896	ENDIF
	897	ELSE
	898	lad(k) = lad(k-1)
	899	ENDIF
	900	ENDDO
	901
	902	ENDIF
	903
[1]	904	!
[138]	905	!-- In case of no given leaf area density gradients, choose a vanishing gradient
	906	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	907	lad_vertical_gradient_level(1) = 0.0
	908	ENDIF
	909
	910	ENDIF
	911
	912	ENDIF
	913
	914	!
[1]	915	!-- Compute Coriolis parameter
	916	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	917	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	918
	919	!
[97]	920	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	921	!-- set the reference temperature equal to the surface temperature.
	922	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	923
	924	!
[97]	925	!-- Reference value has to be used in buoyancy terms
	926	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	927
	928	!
	929	!-- Sign of buoyancy/stability terms
	930	IF ( ocean ) atmos_ocean_sign = -1.0
	931
	932	!
[108]	933	!-- Ocean version must use flux boundary conditions at the top
	934	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	935	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	936	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	937	ENDIF
[97]	938
	939	!
[1]	940	!-- In case of a given slope, compute the relevant quantities
	941	IF ( alpha_surface /= 0.0 ) THEN
	942	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	943	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	944	' ) must be < 90.0'
[226]	945	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	946	ENDIF
	947	sloping_surface = .TRUE.
	948	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	949	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	950	ENDIF
	951
	952	!
	953	!-- Check time step and cfl_factor
	954	IF ( dt /= -1.0 ) THEN
	955	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	956	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	957	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	958	ENDIF
	959	dt_3d = dt
	960	dt_fixed = .TRUE.
	961	ENDIF
	962
	963	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	964	IF ( cfl_factor == -1.0 ) THEN
	965	IF ( momentum_advec == 'ups-scheme' .OR. &
	966	scalar_advec == 'ups-scheme' ) THEN
	967	cfl_factor = 0.8
	968	ELSE
	969	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	970	cfl_factor = 0.8
	971	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	972	cfl_factor = 0.9
	973	ELSE
	974	cfl_factor = 0.1
	975	ENDIF
	976	ENDIF
	977	ELSE
[215]	978	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	979	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	980	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	981	ENDIF
	982	ENDIF
	983
	984	!
	985	!-- Store simulated time at begin
	986	simulated_time_at_begin = simulated_time
	987
	988	!
	989	!-- Set wind speed in the Galilei-transformed system
	990	IF ( galilei_transformation ) THEN
	991	IF ( use_ug_for_galilei_tr .AND. &
	992	ug_vertical_gradient_level(1) == 0.0 .AND. &
	993	vg_vertical_gradient_level(1) == 0.0 ) THEN
	994	u_gtrans = ug_surface
	995	v_gtrans = vg_surface
	996	ELSEIF ( use_ug_for_galilei_tr .AND. &
	997	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	998	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	999	' with galilei transformation'
[226]	1000	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1001	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1002	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1003	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1004	' with galilei transformation'
[226]	1005	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1006	ELSE
[215]	1007	message_string = 'variable translation speed used for galilei-' // &
	1008	'transformation, which may cause & instabilities in stably ' // &
	1009	'stratified regions'
[226]	1010	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1011	ENDIF
	1012	ENDIF
	1013
	1014	!
	1015	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1016	!-- fluxes have to be used in the diffusion-terms
	1017	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1018
	1019	!
	1020	!-- Check boundary conditions and set internal variables:
	1021	!-- Lateral boundary conditions
[73]	1022	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1023	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1024	message_string = 'unknown boundary condition: bc_lr = "' // &
	1025	TRIM( bc_lr ) // '"'
[226]	1026	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1027	ENDIF
[73]	1028	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1029	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1030	message_string = 'unknown boundary condition: bc_ns = "' // &
	1031	TRIM( bc_ns ) // '"'
[226]	1032	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1033	ENDIF
	1034
	1035	!
	1036	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1037	!-- Willimas advection scheme. Several schemes and tools do not work with
	1038	!-- non-cyclic boundary conditions.
	1039	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1040	IF ( psolver /= 'multigrid' ) THEN
[215]	1041	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1042	'psolver = "' // TRIM( psolver ) // '"'
[226]	1043	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1044	ENDIF
	1045	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1046	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1047	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1048	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1049	ENDIF
	1050	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1051	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1052	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1053	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1054	ENDIF
	1055	IF ( galilei_transformation ) THEN
[215]	1056	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1057	'galilei_transformation = .T.'
[226]	1058	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1059	ENDIF
	1060	ENDIF
	1061
	1062	!
	1063	!-- Bottom boundary condition for the turbulent Kinetic energy
	1064	IF ( bc_e_b == 'neumann' ) THEN
	1065	ibc_e_b = 1
	1066	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1067	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1068	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1069	ENDIF
	1070	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1071	ibc_e_b = 2
	1072	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1073	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1074	TRIM( bc_e_b ) // '"'
[226]	1075	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1076	ENDIF
	1077	IF ( .NOT. prandtl_layer ) THEN
	1078	bc_e_b = 'neumann'
	1079	ibc_e_b = 1
[215]	1080	message_string = 'boundary condition bc_e_b changed to "' // &
	1081	TRIM( bc_e_b ) // '"'
[226]	1082	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1083	ENDIF
	1084	ELSE
[215]	1085	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1086	TRIM( bc_e_b ) // '"'
[226]	1087	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1088	ENDIF
	1089
	1090	!
	1091	!-- Boundary conditions for perturbation pressure
	1092	IF ( bc_p_b == 'dirichlet' ) THEN
	1093	ibc_p_b = 0
	1094	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1095	ibc_p_b = 1
	1096	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1097	ibc_p_b = 2
	1098	ELSE
[215]	1099	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1100	TRIM( bc_p_b ) // '"'
[226]	1101	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1102	ENDIF
	1103	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1104	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1105	'" not allowed with prandtl_layer = .FALSE.'
[226]	1106	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1107	ENDIF
	1108	IF ( bc_p_t == 'dirichlet' ) THEN
	1109	ibc_p_t = 0
	1110	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1111	ibc_p_t = 1
	1112	ELSE
[215]	1113	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1114	TRIM( bc_p_t ) // '"'
[226]	1115	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1116	ENDIF
	1117
	1118	!
	1119	!-- Boundary conditions for potential temperature
[102]	1120	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1121	ibc_pt_b = 2
[1]	1122	ELSE
[102]	1123	IF ( bc_pt_b == 'dirichlet' ) THEN
	1124	ibc_pt_b = 0
	1125	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1126	ibc_pt_b = 1
	1127	ELSE
[215]	1128	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1129	TRIM( bc_pt_b ) // '"'
[226]	1130	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1131	ENDIF
	1132	ENDIF
[102]	1133
[1]	1134	IF ( bc_pt_t == 'dirichlet' ) THEN
	1135	ibc_pt_t = 0
	1136	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1137	ibc_pt_t = 1
[19]	1138	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1139	ibc_pt_t = 2
[1]	1140	ELSE
[215]	1141	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1142	TRIM( bc_pt_t ) // '"'
[226]	1143	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1144	ENDIF
	1145
[20]	1146	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1147	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1148	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1149	top_momentumflux_v /= 9999999.9 ) THEN
	1150	constant_top_momentumflux = .TRUE.
	1151	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1152	top_momentumflux_v == 9999999.9 ) ) THEN
	1153	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1154	'must be set'
[226]	1155	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1156	ENDIF
[1]	1157
	1158	!
	1159	!-- A given surface temperature implies Dirichlet boundary condition for
	1160	!-- temperature. In this case specification of a constant heat flux is
	1161	!-- forbidden.
	1162	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1163	surface_heatflux /= 0.0 ) THEN
[215]	1164	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1165	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1166	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1167	ENDIF
	1168	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1169	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1170	'wed with pt_surface_initial_change (/=0) = ', &
	1171	pt_surface_initial_change
[226]	1172	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1173	ENDIF
	1174
	1175	!
[19]	1176	!-- A given temperature at the top implies Dirichlet boundary condition for
	1177	!-- temperature. In this case specification of a constant heat flux is
	1178	!-- forbidden.
	1179	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1180	top_heatflux /= 0.0 ) THEN
[215]	1181	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1182	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1183	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1184	ENDIF
	1185
	1186	!
[95]	1187	!-- Boundary conditions for salinity
	1188	IF ( ocean ) THEN
	1189	IF ( bc_sa_t == 'dirichlet' ) THEN
	1190	ibc_sa_t = 0
	1191	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1192	ibc_sa_t = 1
	1193	ELSE
[215]	1194	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1195	TRIM( bc_sa_t ) // '"'
[226]	1196	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1197	ENDIF
	1198
	1199	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1200	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1201	message_string = 'boundary condition: bc_sa_t = "' // &
	1202	TRIM( bc_sa_t ) // '" requires to set ' // &
	1203	'top_salinityflux'
[226]	1204	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1205	ENDIF
[95]	1206
	1207	!
	1208	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1209	!-- salinity. In this case specification of a constant salinity flux is
	1210	!-- forbidden.
	1211	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1212	top_salinityflux /= 0.0 ) THEN
[215]	1213	message_string = 'boundary condition: bc_sa_t = "' // &
	1214	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1215	'constant_top_salinityflux = .TRUE.'
[226]	1216	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1217	ENDIF
	1218
	1219	ENDIF
	1220
	1221	!
[75]	1222	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1223	!-- water content / scalar
[75]	1224	IF ( humidity .OR. passive_scalar ) THEN
	1225	IF ( humidity ) THEN
[1]	1226	sq = 'q'
	1227	ELSE
	1228	sq = 's'
	1229	ENDIF
	1230	IF ( bc_q_b == 'dirichlet' ) THEN
	1231	ibc_q_b = 0
	1232	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1233	ibc_q_b = 1
	1234	ELSE
[215]	1235	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1236	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1237	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1238	ENDIF
	1239	IF ( bc_q_t == 'dirichlet' ) THEN
	1240	ibc_q_t = 0
	1241	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1242	ibc_q_t = 1
	1243	ELSE
[215]	1244	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1245	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1246	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1247	ENDIF
	1248
	1249	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1250
	1251	!
	1252	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1253	!-- humidity. In this case specification of a constant water flux is
[1]	1254	!-- forbidden.
	1255	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1256	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1257	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1258	'th prescribed surface flux'
[226]	1259	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1260	ENDIF
	1261	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1262	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1263	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1264	q_surface_initial_change
[226]	1265	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1266	ENDIF
	1267
	1268	ENDIF
	1269
	1270	!
	1271	!-- Boundary conditions for horizontal components of wind speed
	1272	IF ( bc_uv_b == 'dirichlet' ) THEN
	1273	ibc_uv_b = 0
	1274	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1275	ibc_uv_b = 1
	1276	IF ( prandtl_layer ) THEN
[215]	1277	message_string = 'boundary condition: bc_uv_b = "' // &
	1278	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1279	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1280	ENDIF
	1281	ELSE
[215]	1282	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1283	TRIM( bc_uv_b ) // '"'
[226]	1284	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1285	ENDIF
[215]	1286
[108]	1287	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1288	bc_uv_t = 'neumann'
[1]	1289	ibc_uv_t = 1
	1290	ELSE
[132]	1291	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1292	ibc_uv_t = 0
	1293	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1294	ibc_uv_t = 1
	1295	ELSE
[215]	1296	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1297	TRIM( bc_uv_t ) // '"'
[226]	1298	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1299	ENDIF
	1300	ENDIF
	1301
	1302	!
	1303	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1304	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1305	IF ( momentum_advec == 'ups-scheme' ) THEN
	1306	rayleigh_damping_factor = 0.01
	1307	ELSE
	1308	rayleigh_damping_factor = 0.0
	1309	ENDIF
	1310	ELSE
	1311	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1312	THEN
[215]	1313	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1314	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1315	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1316	ENDIF
	1317	ENDIF
	1318
	1319	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1320	IF ( .NOT. ocean ) THEN
	1321	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1322	ELSE
	1323	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1324	ENDIF
[1]	1325	ELSE
[108]	1326	IF ( .NOT. ocean ) THEN
	1327	IF ( rayleigh_damping_height < 0.0 .OR. &
	1328	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1329	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1330	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1331	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1332	ENDIF
[108]	1333	ELSE
	1334	IF ( rayleigh_damping_height > 0.0 .OR. &
	1335	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1336	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1337	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1338	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1339	ENDIF
[1]	1340	ENDIF
	1341	ENDIF
	1342
	1343	!
	1344	!-- Check limiters for Upstream-Spline scheme
	1345	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1346	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1347	overshoot_limit_e < 0.0 ) THEN
[215]	1348	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1349	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1350	ENDIF
	1351	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1352	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1353	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1354	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1355	ENDIF
	1356
	1357	!
	1358	!-- Check number of chosen statistic regions. More than 10 regions are not
	1359	!-- allowed, because so far no more than 10 corresponding output files can
	1360	!-- be opened (cf. check_open)
	1361	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1362	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1363	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1364	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1365	ENDIF
	1366	IF ( normalizing_region > statistic_regions .OR. &
	1367	normalizing_region < 0) THEN
[215]	1368	WRITE ( message_string, * ) 'normalizing_region = ', &
	1369	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1370	' (value of statistic_regions)'
[226]	1371	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1372	ENDIF
	1373
	1374	!
[116]	1375	!-- Check the interval for sorting particles.
	1376	!-- Using particles as cloud droplets requires sorting after each timestep.
	1377	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1378	dt_sort_particles = 0.0
[215]	1379	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1380	'_droplets = .TRUE.'
[226]	1381	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1382	ENDIF
	1383
	1384	!
[1]	1385	!-- Set the default intervals for data output, if necessary
	1386	!-- NOTE: dt_dosp has already been set in package_parin
	1387	IF ( dt_data_output /= 9999999.9 ) THEN
	1388	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1389	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1390	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1391	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1392	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1393	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1394	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1395	ENDIF
	1396
	1397	!
	1398	!-- Set the default skip time intervals for data output, if necessary
	1399	IF ( skip_time_dopr == 9999999.9 ) &
	1400	skip_time_dopr = skip_time_data_output
	1401	IF ( skip_time_dosp == 9999999.9 ) &
	1402	skip_time_dosp = skip_time_data_output
	1403	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1404	skip_time_do2d_xy = skip_time_data_output
	1405	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1406	skip_time_do2d_xz = skip_time_data_output
	1407	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1408	skip_time_do2d_yz = skip_time_data_output
	1409	IF ( skip_time_do3d == 9999999.9 ) &
	1410	skip_time_do3d = skip_time_data_output
	1411	IF ( skip_time_data_output_av == 9999999.9 ) &
	1412	skip_time_data_output_av = skip_time_data_output
	1413
	1414	!
	1415	!-- Check the average intervals (first for 3d-data, then for profiles and
	1416	!-- spectra)
	1417	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1418	WRITE( message_string, * ) 'averaging_interval = ', &
	1419	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1420	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1421	ENDIF
	1422
	1423	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1424	averaging_interval_pr = averaging_interval
	1425	ENDIF
	1426
	1427	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1428	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1429	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1430	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1431	ENDIF
	1432
	1433	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1434	averaging_interval_sp = averaging_interval
	1435	ENDIF
	1436
	1437	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1438	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1439	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1440	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1441	ENDIF
	1442
	1443	!
	1444	!-- Set the default interval for profiles entering the temporal average
	1445	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1446	dt_averaging_input_pr = dt_averaging_input
	1447	ENDIF
	1448
	1449	!
	1450	!-- Set the default interval for the output of timeseries to a reasonable
	1451	!-- value (tries to minimize the number of calls of flow_statistics)
	1452	IF ( dt_dots == 9999999.9 ) THEN
	1453	IF ( averaging_interval_pr == 0.0 ) THEN
	1454	dt_dots = MIN( dt_run_control, dt_dopr )
	1455	ELSE
	1456	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1457	ENDIF
	1458	ENDIF
	1459
	1460	!
	1461	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1462	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1463	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1464	dt_averaging_input, ' must be <= averaging_interval = ', &
	1465	averaging_interval
[226]	1466	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1467	ENDIF
	1468
	1469	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1470	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1471	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1472	averaging_interval_pr
[226]	1473	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1474	ENDIF
	1475
	1476	!
[72]	1477	!-- Set the default value for the integration interval of precipitation amount
	1478	IF ( precipitation ) THEN
	1479	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1480	precipitation_amount_interval = dt_do2d_xy
	1481	ELSE
	1482	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1483	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1484	precipitation_amount_interval, ' must not be larger than ', &
	1485	'dt_do2d_xy = ', dt_do2d_xy
[226]	1486	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1487	ENDIF
	1488	ENDIF
	1489	ENDIF
	1490
	1491	!
[1]	1492	!-- Determine the number of output profiles and check whether they are
	1493	!-- permissible
	1494	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1495
	1496	dopr_n = dopr_n + 1
	1497	i = dopr_n
	1498
	1499	!
	1500	!-- Determine internal profile number (for hom, homs)
	1501	!-- and store height levels
	1502	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1503
	1504	CASE ( 'u', '#u' )
	1505	dopr_index(i) = 1
[87]	1506	dopr_unit(i) = 'm/s'
[1]	1507	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1508	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1509	dopr_initial_index(i) = 5
	1510	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1511	data_output_pr(i) = data_output_pr(i)(2:)
	1512	ENDIF
	1513
	1514	CASE ( 'v', '#v' )
	1515	dopr_index(i) = 2
[87]	1516	dopr_unit(i) = 'm/s'
	1517	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1518	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1519	dopr_initial_index(i) = 6
	1520	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1521	data_output_pr(i) = data_output_pr(i)(2:)
	1522	ENDIF
	1523
	1524	CASE ( 'w' )
	1525	dopr_index(i) = 3
[87]	1526	dopr_unit(i) = 'm/s'
	1527	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1528
	1529	CASE ( 'pt', '#pt' )
	1530	IF ( .NOT. cloud_physics ) THEN
	1531	dopr_index(i) = 4
[87]	1532	dopr_unit(i) = 'K'
[1]	1533	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1534	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1535	dopr_initial_index(i) = 7
	1536	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1537	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1538	data_output_pr(i) = data_output_pr(i)(2:)
	1539	ENDIF
	1540	ELSE
	1541	dopr_index(i) = 43
[87]	1542	dopr_unit(i) = 'K'
[1]	1543	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1544	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1545	dopr_initial_index(i) = 28
	1546	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1547	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1548	data_output_pr(i) = data_output_pr(i)(2:)
	1549	ENDIF
	1550	ENDIF
	1551
	1552	CASE ( 'e' )
	1553	dopr_index(i) = 8
[87]	1554	dopr_unit(i) = 'm2/s2'
[1]	1555	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1556	hom(nzb,2,8,:) = 0.0
	1557
	1558	CASE ( 'km', '#km' )
	1559	dopr_index(i) = 9
[87]	1560	dopr_unit(i) = 'm2/s'
[1]	1561	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1562	hom(nzb,2,9,:) = 0.0
	1563	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1564	dopr_initial_index(i) = 23
	1565	hom(:,2,23,:) = hom(:,2,9,:)
	1566	data_output_pr(i) = data_output_pr(i)(2:)
	1567	ENDIF
	1568
	1569	CASE ( 'kh', '#kh' )
	1570	dopr_index(i) = 10
[87]	1571	dopr_unit(i) = 'm2/s'
[1]	1572	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1573	hom(nzb,2,10,:) = 0.0
	1574	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1575	dopr_initial_index(i) = 24
	1576	hom(:,2,24,:) = hom(:,2,10,:)
	1577	data_output_pr(i) = data_output_pr(i)(2:)
	1578	ENDIF
	1579
	1580	CASE ( 'l', '#l' )
	1581	dopr_index(i) = 11
[87]	1582	dopr_unit(i) = 'm'
[1]	1583	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1584	hom(nzb,2,11,:) = 0.0
	1585	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1586	dopr_initial_index(i) = 25
	1587	hom(:,2,25,:) = hom(:,2,11,:)
	1588	data_output_pr(i) = data_output_pr(i)(2:)
	1589	ENDIF
	1590
	1591	CASE ( 'w"u"' )
	1592	dopr_index(i) = 12
[87]	1593	dopr_unit(i) = 'm2/s2'
[1]	1594	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1595	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1596
	1597	CASE ( 'wu' )
	1598	dopr_index(i) = 13
[87]	1599	dopr_unit(i) = 'm2/s2'
[1]	1600	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1601
	1602	CASE ( 'w"v"' )
	1603	dopr_index(i) = 14
[87]	1604	dopr_unit(i) = 'm2/s2'
[1]	1605	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1606	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1607
	1608	CASE ( 'wv' )
	1609	dopr_index(i) = 15
[87]	1610	dopr_unit(i) = 'm2/s2'
[1]	1611	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1612
	1613	CASE ( 'w"pt"' )
	1614	dopr_index(i) = 16
[87]	1615	dopr_unit(i) = 'K m/s'
[1]	1616	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1617
	1618	CASE ( 'wpt' )
	1619	dopr_index(i) = 17
[87]	1620	dopr_unit(i) = 'K m/s'
[1]	1621	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1622
	1623	CASE ( 'wpt' )
	1624	dopr_index(i) = 18
[87]	1625	dopr_unit(i) = 'K m/s'
[1]	1626	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1627
	1628	CASE ( 'wu' )
	1629	dopr_index(i) = 19
[87]	1630	dopr_unit(i) = 'm2/s2'
[1]	1631	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1632	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1633
	1634	CASE ( 'wv' )
	1635	dopr_index(i) = 20
[87]	1636	dopr_unit(i) = 'm2/s2'
[1]	1637	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1638	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1639
	1640	CASE ( 'wptBC' )
	1641	dopr_index(i) = 21
[87]	1642	dopr_unit(i) = 'K m/s'
[1]	1643	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1644
	1645	CASE ( 'wptBC' )
	1646	dopr_index(i) = 22
[87]	1647	dopr_unit(i) = 'K m/s'
[1]	1648	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1649
[96]	1650	CASE ( 'sa', '#sa' )
	1651	IF ( .NOT. ocean ) THEN
[215]	1652	message_string = 'data_output_pr = ' // &
	1653	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1654	'lemented for ocean = .FALSE.'
[226]	1655	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1656	ELSE
	1657	dopr_index(i) = 23
	1658	dopr_unit(i) = 'psu'
	1659	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1660	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1661	dopr_initial_index(i) = 26
	1662	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1663	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1664	data_output_pr(i) = data_output_pr(i)(2:)
	1665	ENDIF
	1666	ENDIF
	1667
[1]	1668	CASE ( 'u*2' )
	1669	dopr_index(i) = 30
[87]	1670	dopr_unit(i) = 'm2/s2'
[1]	1671	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1672
	1673	CASE ( 'v*2' )
	1674	dopr_index(i) = 31
[87]	1675	dopr_unit(i) = 'm2/s2'
[1]	1676	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1677
	1678	CASE ( 'w*2' )
	1679	dopr_index(i) = 32
[87]	1680	dopr_unit(i) = 'm2/s2'
[1]	1681	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1682
	1683	CASE ( 'pt*2' )
	1684	dopr_index(i) = 33
[87]	1685	dopr_unit(i) = 'K2'
[1]	1686	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1687
	1688	CASE ( 'e*' )
	1689	dopr_index(i) = 34
[87]	1690	dopr_unit(i) = 'm2/s2'
[1]	1691	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1692
	1693	CASE ( 'w2pt' )
	1694	dopr_index(i) = 35
[87]	1695	dopr_unit(i) = 'K m2/s2'
[1]	1696	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1697
	1698	CASE ( 'wpt2' )
	1699	dopr_index(i) = 36
[87]	1700	dopr_unit(i) = 'K2 m/s'
[1]	1701	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1702
	1703	CASE ( 'we' )
	1704	dopr_index(i) = 37
[87]	1705	dopr_unit(i) = 'm3/s3'
[1]	1706	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1707
	1708	CASE ( 'w*3' )
	1709	dopr_index(i) = 38
[87]	1710	dopr_unit(i) = 'm3/s3'
[1]	1711	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1712
	1713	CASE ( 'Sw' )
	1714	dopr_index(i) = 39
[89]	1715	dopr_unit(i) = 'none'
[1]	1716	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1717
[232]	1718	CASE ( 'p' )
	1719	dopr_index(i) = 40
	1720	dopr_unit(i) = 'Pa'
	1721	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1722
[1]	1723	CASE ( 'q', '#q' )
[108]	1724	IF ( .NOT. humidity ) THEN
[215]	1725	message_string = 'data_output_pr = ' // &
	1726	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1727	'lemented for humidity = .FALSE.'
[226]	1728	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1729	ELSE
	1730	dopr_index(i) = 41
[87]	1731	dopr_unit(i) = 'kg/kg'
	1732	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1733	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1734	dopr_initial_index(i) = 26
	1735	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1736	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1737	data_output_pr(i) = data_output_pr(i)(2:)
	1738	ENDIF
	1739	ENDIF
	1740
	1741	CASE ( 's', '#s' )
	1742	IF ( .NOT. passive_scalar ) THEN
[215]	1743	message_string = 'data_output_pr = ' // &
	1744	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1745	'lemented for passive_scalar = .FALSE.'
[226]	1746	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1747	ELSE
	1748	dopr_index(i) = 41
[87]	1749	dopr_unit(i) = 'kg/m3'
	1750	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1751	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1752	dopr_initial_index(i) = 26
	1753	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1754	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1755	data_output_pr(i) = data_output_pr(i)(2:)
	1756	ENDIF
	1757	ENDIF
	1758
	1759	CASE ( 'qv', '#qv' )
	1760	IF ( .NOT. cloud_physics ) THEN
	1761	dopr_index(i) = 41
[87]	1762	dopr_unit(i) = 'kg/kg'
	1763	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1764	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1765	dopr_initial_index(i) = 26
	1766	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1767	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1768	data_output_pr(i) = data_output_pr(i)(2:)
	1769	ENDIF
	1770	ELSE
	1771	dopr_index(i) = 42
[87]	1772	dopr_unit(i) = 'kg/kg'
	1773	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1774	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1775	dopr_initial_index(i) = 27
	1776	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1777	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1778	data_output_pr(i) = data_output_pr(i)(2:)
	1779	ENDIF
	1780	ENDIF
	1781
	1782	CASE ( 'lpt', '#lpt' )
	1783	IF ( .NOT. cloud_physics ) THEN
[215]	1784	message_string = 'data_output_pr = ' // &
	1785	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1786	'lemented for cloud_physics = .FALSE.'
[226]	1787	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	1788	ELSE
	1789	dopr_index(i) = 4
[87]	1790	dopr_unit(i) = 'K'
[1]	1791	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1792	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1793	dopr_initial_index(i) = 7
	1794	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1795	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1796	data_output_pr(i) = data_output_pr(i)(2:)
	1797	ENDIF
	1798	ENDIF
	1799
	1800	CASE ( 'vpt', '#vpt' )
	1801	dopr_index(i) = 44
[87]	1802	dopr_unit(i) = 'K'
	1803	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1804	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1805	dopr_initial_index(i) = 29
	1806	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1807	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1808	data_output_pr(i) = data_output_pr(i)(2:)
	1809	ENDIF
	1810
	1811	CASE ( 'w"vpt"' )
	1812	dopr_index(i) = 45
[87]	1813	dopr_unit(i) = 'K m/s'
[1]	1814	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1815
	1816	CASE ( 'wvpt' )
	1817	dopr_index(i) = 46
[87]	1818	dopr_unit(i) = 'K m/s'
[1]	1819	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1820
	1821	CASE ( 'wvpt' )
	1822	dopr_index(i) = 47
[87]	1823	dopr_unit(i) = 'K m/s'
[1]	1824	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1825
	1826	CASE ( 'w"q"' )
[108]	1827	IF ( .NOT. humidity ) THEN
[215]	1828	message_string = 'data_output_pr = ' // &
	1829	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1830	'lemented for humidity = .FALSE.'
[226]	1831	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1832	ELSE
	1833	dopr_index(i) = 48
[87]	1834	dopr_unit(i) = 'kg/kg m/s'
[1]	1835	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1836	ENDIF
	1837
	1838	CASE ( 'wq' )
[108]	1839	IF ( .NOT. humidity ) THEN
[215]	1840	message_string = 'data_output_pr = ' // &
	1841	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1842	'lemented for humidity = .FALSE.'
[226]	1843	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1844	ELSE
	1845	dopr_index(i) = 49
[87]	1846	dopr_unit(i) = 'kg/kg m/s'
[1]	1847	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1848	ENDIF
	1849
	1850	CASE ( 'wq' )
[108]	1851	IF ( .NOT. humidity ) THEN
[215]	1852	message_string = 'data_output_pr = ' // &
	1853	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1854	'lemented for humidity = .FALSE.'
[226]	1855	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1856	ELSE
	1857	dopr_index(i) = 50
[87]	1858	dopr_unit(i) = 'kg/kg m/s'
[1]	1859	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1860	ENDIF
	1861
	1862	CASE ( 'w"s"' )
	1863	IF ( .NOT. passive_scalar ) THEN
[215]	1864	message_string = 'data_output_pr = ' // &
	1865	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1866	'lemented for passive_scalar = .FALSE.'
[226]	1867	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1868	ELSE
	1869	dopr_index(i) = 48
[87]	1870	dopr_unit(i) = 'kg/m3 m/s'
[1]	1871	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1872	ENDIF
	1873
	1874	CASE ( 'ws' )
	1875	IF ( .NOT. passive_scalar ) THEN
[215]	1876	message_string = 'data_output_pr = ' // &
	1877	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1878	'lemented for passive_scalar = .FALSE.'
[226]	1879	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1880	ELSE
	1881	dopr_index(i) = 49
[87]	1882	dopr_unit(i) = 'kg/m3 m/s'
[1]	1883	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1884	ENDIF
	1885
	1886	CASE ( 'ws' )
	1887	IF ( .NOT. passive_scalar ) THEN
[215]	1888	message_string = 'data_output_pr = ' // &
	1889	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1890	'lemented for passive_scalar = .FALSE.'
[226]	1891	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1892	ELSE
	1893	dopr_index(i) = 50
[87]	1894	dopr_unit(i) = 'kg/m3 m/s'
[1]	1895	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1896	ENDIF
	1897
	1898	CASE ( 'w"qv"' )
[75]	1899	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1900	THEN
	1901	dopr_index(i) = 48
[87]	1902	dopr_unit(i) = 'kg/kg m/s'
[1]	1903	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1904	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1905	dopr_index(i) = 51
[87]	1906	dopr_unit(i) = 'kg/kg m/s'
[1]	1907	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	1908	ELSE
[215]	1909	message_string = 'data_output_pr = ' // &
	1910	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1911	'lemented for cloud_physics = .FALSE. an&' // &
	1912	'd humidity = .FALSE.'
[226]	1913	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1914	ENDIF
	1915
	1916	CASE ( 'wqv' )
[75]	1917	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1918	THEN
	1919	dopr_index(i) = 49
[87]	1920	dopr_unit(i) = 'kg/kg m/s'
[1]	1921	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1922	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1923	dopr_index(i) = 52
[87]	1924	dopr_unit(i) = 'kg/kg m/s'
[1]	1925	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	1926	ELSE
[215]	1927	message_string = 'data_output_pr = ' // &
	1928	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1929	'lemented for cloud_physics = .FALSE. an&' // &
	1930	'd humidity = .FALSE.'
[226]	1931	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1932	ENDIF
	1933
	1934	CASE ( 'wqv' )
[75]	1935	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1936	THEN
	1937	dopr_index(i) = 50
[87]	1938	dopr_unit(i) = 'kg/kg m/s'
[1]	1939	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1940	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1941	dopr_index(i) = 53
[87]	1942	dopr_unit(i) = 'kg/kg m/s'
[1]	1943	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	1944	ELSE
[215]	1945	message_string = 'data_output_pr = ' // &
	1946	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1947	'lemented for cloud_physics = .FALSE. an&' // &
	1948	'd humidity = .FALSE.'
[226]	1949	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1950	ENDIF
	1951
	1952	CASE ( 'ql' )
	1953	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	1954	message_string = 'data_output_pr = ' // &
	1955	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1956	'lemented for cloud_physics = .FALSE. or' // &
	1957	'&cloud_droplets = .FALSE.'
[226]	1958	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	1959	ELSE
	1960	dopr_index(i) = 54
[87]	1961	dopr_unit(i) = 'kg/kg'
[1]	1962	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	1963	ENDIF
	1964
	1965	CASE ( 'wuu*/dz' )
	1966	dopr_index(i) = 55
[87]	1967	dopr_unit(i) = 'm2/s3'
[1]	1968	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	1969
	1970	CASE ( 'wp/dz' )
	1971	dopr_index(i) = 56
[87]	1972	dopr_unit(i) = 'm2/s3'
[106]	1973	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1974
	1975	CASE ( 'w"e/dz' )
	1976	dopr_index(i) = 57
[87]	1977	dopr_unit(i) = 'm2/s3'
[1]	1978	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	1979
	1980	CASE ( 'u"pt"' )
	1981	dopr_index(i) = 58
[87]	1982	dopr_unit(i) = 'K m/s'
[1]	1983	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	1984
	1985	CASE ( 'upt' )
	1986	dopr_index(i) = 59
[87]	1987	dopr_unit(i) = 'K m/s'
[1]	1988	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	1989
	1990	CASE ( 'upt_t' )
	1991	dopr_index(i) = 60
[87]	1992	dopr_unit(i) = 'K m/s'
[1]	1993	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	1994
	1995	CASE ( 'v"pt"' )
	1996	dopr_index(i) = 61
[87]	1997	dopr_unit(i) = 'K m/s'
[1]	1998	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	1999
	2000	CASE ( 'vpt' )
	2001	dopr_index(i) = 62
[87]	2002	dopr_unit(i) = 'K m/s'
[1]	2003	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2004
	2005	CASE ( 'vpt_t' )
	2006	dopr_index(i) = 63
[87]	2007	dopr_unit(i) = 'K m/s'
[1]	2008	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2009
[96]	2010	CASE ( 'rho' )
	2011	dopr_index(i) = 64
	2012	dopr_unit(i) = 'kg/m3'
	2013	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2014
[96]	2015	CASE ( 'w"sa"' )
	2016	IF ( .NOT. ocean ) THEN
[215]	2017	message_string = 'data_output_pr = ' // &
	2018	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2019	'lemented for ocean = .FALSE.'
[226]	2020	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2021	ELSE
	2022	dopr_index(i) = 65
	2023	dopr_unit(i) = 'psu m/s'
	2024	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2025	ENDIF
	2026
	2027	CASE ( 'wsa' )
	2028	IF ( .NOT. ocean ) THEN
[215]	2029	message_string = 'data_output_pr = ' // &
	2030	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2031	'lemented for ocean = .FALSE.'
[226]	2032	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2033	ELSE
	2034	dopr_index(i) = 66
	2035	dopr_unit(i) = 'psu m/s'
	2036	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2037	ENDIF
	2038
	2039	CASE ( 'wsa' )
	2040	IF ( .NOT. ocean ) THEN
[215]	2041	message_string = 'data_output_pr = ' // &
	2042	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2043	'lemented for ocean = .FALSE.'
[226]	2044	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2045	ELSE
	2046	dopr_index(i) = 67
	2047	dopr_unit(i) = 'psu m/s'
	2048	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2049	ENDIF
	2050
[106]	2051	CASE ( 'wp' )
	2052	dopr_index(i) = 68
	2053	dopr_unit(i) = 'm3/s3'
	2054	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2055
[106]	2056	CASE ( 'w"e' )
	2057	dopr_index(i) = 69
	2058	dopr_unit(i) = 'm3/s3'
	2059	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2060
[197]	2061	CASE ( 'q*2' )
	2062	IF ( .NOT. humidity ) THEN
[215]	2063	message_string = 'data_output_pr = ' // &
	2064	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2065	'lemented for humidity = .FALSE.'
[226]	2066	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2067	ELSE
	2068	dopr_index(i) = 70
	2069	dopr_unit(i) = 'kg2/kg2'
	2070	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2071	ENDIF
[106]	2072
[1]	2073	CASE DEFAULT
[87]	2074
	2075	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2076
	2077	IF ( unit == 'illegal' ) THEN
[215]	2078	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2079	message_string = 'illegal value for data_output_pr or ' // &
	2080	'data_output_pr_user = "' // &
	2081	TRIM( data_output_pr(i) ) // '"'
[226]	2082	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2083	ELSE
	2084	message_string = 'illegal value for data_output_pr = "' // &
	2085	TRIM( data_output_pr(i) ) // '"'
[226]	2086	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2087	ENDIF
[1]	2088	ENDIF
	2089
	2090	END SELECT
	2091	!
	2092	!-- Check to which of the predefined coordinate systems the profile belongs
	2093	DO k = 1, crmax
	2094	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2095	/=0 ) &
	2096	THEN
	2097	dopr_crossindex(i) = k
	2098	EXIT
	2099	ENDIF
	2100	ENDDO
	2101	!
	2102	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2103	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2104	!-- control characters
	2105	dopr_label(i) = data_output_pr(i)
	2106	position = INDEX( dopr_label(i) , '"' )
	2107	DO WHILE ( position /= 0 )
	2108	dopr_label(i)(position:position) = ''''
	2109	position = INDEX( dopr_label(i) , '"' )
	2110	ENDDO
	2111
	2112	ENDDO
	2113
	2114	!
	2115	!-- y-value range of the coordinate system (PROFIL).
	2116	!-- x-value range determined in plot_1d.
[94]	2117	IF ( .NOT. ocean ) THEN
	2118	cross_uymin = 0.0
	2119	IF ( z_max_do1d == -1.0 ) THEN
	2120	cross_uymax = zu(nzt+1)
	2121	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2122	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2123	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2124	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2125	ELSE
	2126	cross_uymax = z_max_do1d
	2127	ENDIF
[1]	2128	ENDIF
	2129
	2130	!
	2131	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2132	!-- permissible
	2133	DO i = 1, crmax
	2134	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2135
	2136	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2137	j = 0
	2138
	2139	CASE DEFAULT
[215]	2140	message_string = 'unknown normalization method cross_normali' // &
	2141	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2142	'"'
[226]	2143	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2144
	2145	END SELECT
	2146	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2147
	2148	CASE ( '', 'z_i' )
	2149	j = 0
	2150
	2151	CASE DEFAULT
[215]	2152	message_string = 'unknown normalization method cross_normali' // &
	2153	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2154	'"'
[226]	2155	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2156
	2157	END SELECT
	2158	ENDDO
	2159	!
	2160	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2161	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2162	THEN
[215]	2163	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2164	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2165	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2166	ENDIF
	2167
	2168
	2169	!
	2170	!-- Append user-defined data output variables to the standard data output
	2171	IF ( data_output_user(1) /= ' ' ) THEN
	2172	i = 1
	2173	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2174	i = i + 1
	2175	ENDDO
	2176	j = 1
	2177	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2178	IF ( i > 100 ) THEN
[215]	2179	message_string = 'number of output quantitities given by data' // &
	2180	'_output and data_output_user exceeds the limit of 100'
[226]	2181	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2182	ENDIF
	2183	data_output(i) = data_output_user(j)
	2184	i = i + 1
	2185	j = j + 1
	2186	ENDDO
	2187	ENDIF
	2188
	2189	!
	2190	!-- Check and set steering parameters for 2d/3d data output and averaging
	2191	i = 1
	2192	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2193	!
	2194	!-- Check for data averaging
	2195	ilen = LEN_TRIM( data_output(i) )
	2196	j = 0 ! no data averaging
	2197	IF ( ilen > 3 ) THEN
	2198	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2199	j = 1 ! data averaging
	2200	data_output(i) = data_output(i)(1:ilen-3)
	2201	ENDIF
	2202	ENDIF
	2203	!
	2204	!-- Check for cross section or volume data
	2205	ilen = LEN_TRIM( data_output(i) )
	2206	k = 0 ! 3d data
	2207	var = data_output(i)(1:ilen)
	2208	IF ( ilen > 3 ) THEN
	2209	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2210	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2211	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2212	k = 1 ! 2d data
	2213	var = data_output(i)(1:ilen-3)
	2214	ENDIF
	2215	ENDIF
	2216	!
	2217	!-- Check for allowed value and set units
	2218	SELECT CASE ( TRIM( var ) )
	2219
	2220	CASE ( 'e' )
	2221	IF ( constant_diffusion ) THEN
[215]	2222	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2223	'res constant_diffusion = .FALSE.'
[226]	2224	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2225	ENDIF
	2226	unit = 'm2/s2'
	2227
	2228	CASE ( 'pc', 'pr' )
	2229	IF ( .NOT. particle_advection ) THEN
[215]	2230	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2231	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2232	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2233	ENDIF
	2234	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2235	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2236
	2237	CASE ( 'q', 'vpt' )
[75]	2238	IF ( .NOT. humidity ) THEN
[215]	2239	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2240	'res humidity = .TRUE.'
[226]	2241	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2242	ENDIF
	2243	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2244	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2245
	2246	CASE ( 'ql' )
	2247	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2248	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2249	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2250	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2251	ENDIF
	2252	unit = 'kg/kg'
	2253
	2254	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2255	IF ( .NOT. cloud_droplets ) THEN
[215]	2256	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2257	'res cloud_droplets = .TRUE.'
[226]	2258	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2259	ENDIF
	2260	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2261	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2262	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2263
	2264	CASE ( 'qv' )
	2265	IF ( .NOT. cloud_physics ) THEN
[215]	2266	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2267	'res cloud_physics = .TRUE.'
[226]	2268	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2269	ENDIF
	2270	unit = 'kg/kg'
	2271
[96]	2272	CASE ( 'rho' )
	2273	IF ( .NOT. ocean ) THEN
[215]	2274	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2275	'res ocean = .TRUE.'
[226]	2276	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2277	ENDIF
	2278	unit = 'kg/m3'
	2279
[1]	2280	CASE ( 's' )
	2281	IF ( .NOT. passive_scalar ) THEN
[215]	2282	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2283	'res passive_scalar = .TRUE.'
[226]	2284	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2285	ENDIF
	2286	unit = 'conc'
	2287
[96]	2288	CASE ( 'sa' )
	2289	IF ( .NOT. ocean ) THEN
[215]	2290	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2291	'res ocean = .TRUE.'
[226]	2292	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2293	ENDIF
	2294	unit = 'psu'
	2295
[72]	2296	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
[1]	2297	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2298	message_string = 'illegal value for data_output: "' // &
	2299	TRIM( var ) // '" & only 2d-horizontal ' // &
	2300	'cross sections are allowed for this value'
[226]	2301	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2302	ENDIF
	2303	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2304	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2305	'res cloud_physics = .TRUE.'
[226]	2306	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2307	ENDIF
[72]	2308	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2309	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2310	'res precipitation = .TRUE.'
[226]	2311	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2312	ENDIF
	2313	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2314	message_string = 'temporal averaging of precipitation ' // &
	2315	'amount "' // TRIM( var ) // '" is not possible'
[226]	2316	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2317	ENDIF
	2318	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2319	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2320	'res precipitation = .TRUE.'
[226]	2321	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2322	ENDIF
	2323
	2324
[1]	2325	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2326	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2327	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
[72]	2328	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2329	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2330	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[1]	2331
	2332	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2333	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2334	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2335	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2336	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2337	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2338	CONTINUE
	2339
	2340	CASE DEFAULT
	2341	CALL user_check_data_output( var, unit )
	2342
	2343	IF ( unit == 'illegal' ) THEN
[215]	2344	IF ( data_output_user(1) /= ' ' ) THEN
	2345	message_string = 'illegal value for data_output or ' // &
	2346	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2347	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2348	ELSE
	2349	message_string = 'illegal value for data_output =' // &
	2350	TRIM( data_output(i) ) // '"'
[226]	2351	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2352	ENDIF
	2353	ENDIF
	2354
	2355	END SELECT
	2356	!
	2357	!-- Set the internal steering parameters appropriately
	2358	IF ( k == 0 ) THEN
	2359	do3d_no(j) = do3d_no(j) + 1
	2360	do3d(j,do3d_no(j)) = data_output(i)
	2361	do3d_unit(j,do3d_no(j)) = unit
	2362	ELSE
	2363	do2d_no(j) = do2d_no(j) + 1
	2364	do2d(j,do2d_no(j)) = data_output(i)
	2365	do2d_unit(j,do2d_no(j)) = unit
	2366	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2367	data_output_xy(j) = .TRUE.
	2368	ENDIF
	2369	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2370	data_output_xz(j) = .TRUE.
	2371	ENDIF
	2372	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2373	data_output_yz(j) = .TRUE.
	2374	ENDIF
	2375	ENDIF
	2376
	2377	IF ( j == 1 ) THEN
	2378	!
	2379	!-- Check, if variable is already subject to averaging
	2380	found = .FALSE.
	2381	DO k = 1, doav_n
	2382	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2383	ENDDO
	2384
	2385	IF ( .NOT. found ) THEN
	2386	doav_n = doav_n + 1
	2387	doav(doav_n) = var
	2388	ENDIF
	2389	ENDIF
	2390
	2391	i = i + 1
	2392	ENDDO
	2393
	2394	!
	2395	!-- Store sectional planes in one shared array
	2396	section(:,1) = section_xy
	2397	section(:,2) = section_xz
	2398	section(:,3) = section_yz
	2399
	2400	!
	2401	!-- Upper plot limit (grid point value) for 1D profiles
	2402	IF ( z_max_do1d == -1.0 ) THEN
	2403	nz_do1d = nzt+1
	2404	ELSE
	2405	DO k = nzb+1, nzt+1
	2406	nz_do1d = k
	2407	IF ( zw(k) > z_max_do1d ) EXIT
	2408	ENDDO
	2409	ENDIF
	2410
	2411	!
	2412	!-- Upper plot limit for 2D vertical sections
	2413	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2414	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2415	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2416	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2417	' (zu(nzt))'
[226]	2418	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2419	ENDIF
	2420
	2421	!
	2422	!-- Upper plot limit for 3D arrays
	2423	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2424
	2425	!
	2426	!-- Determine and check accuracy for compressed 3D plot output
	2427	IF ( do3d_compress ) THEN
	2428	!
	2429	!-- Compression only permissible on T3E machines
	2430	IF ( host(1:3) /= 't3e' ) THEN
[215]	2431	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2432	TRIM( host ) // '"'
[226]	2433	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2434	ENDIF
	2435
	2436	i = 1
	2437	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2438
	2439	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2440	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2441	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2442	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2443	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2444	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2445	ENDIF
	2446
	2447	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2448	var = do3d_comp_prec(i)(1:ilen-1)
	2449
	2450	SELECT CASE ( var )
	2451
	2452	CASE ( 'u' )
	2453	j = 1
	2454	CASE ( 'v' )
	2455	j = 2
	2456	CASE ( 'w' )
	2457	j = 3
	2458	CASE ( 'p' )
	2459	j = 4
	2460	CASE ( 'pt' )
	2461	j = 5
	2462
	2463	CASE DEFAULT
[215]	2464	WRITE( message_string, * ) 'unknown variable "', &
	2465	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2466	i, ')'
[226]	2467	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2468
	2469	END SELECT
	2470
	2471	plot_3d_precision(j)%precision = prec
	2472	i = i + 1
	2473
	2474	ENDDO
	2475	ENDIF
	2476
	2477	!
	2478	!-- Check the data output format(s)
	2479	IF ( data_output_format(1) == ' ' ) THEN
	2480	!
	2481	!-- Default value
	2482	netcdf_output = .TRUE.
	2483	ELSE
	2484	i = 1
	2485	DO WHILE ( data_output_format(i) /= ' ' )
	2486
	2487	SELECT CASE ( data_output_format(i) )
	2488
	2489	CASE ( 'netcdf' )
	2490	netcdf_output = .TRUE.
	2491	CASE ( 'iso2d' )
	2492	iso2d_output = .TRUE.
	2493	CASE ( 'profil' )
	2494	profil_output = .TRUE.
	2495	CASE ( 'avs' )
	2496	avs_output = .TRUE.
	2497
	2498	CASE DEFAULT
[215]	2499	message_string = 'unknown value for data_output_format "' // &
	2500	TRIM( data_output_format(i) ) // '"'
[226]	2501	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2502
	2503	END SELECT
	2504
	2505	i = i + 1
	2506	IF ( i > 10 ) EXIT
	2507
	2508	ENDDO
	2509
	2510	ENDIF
	2511
	2512	!
	2513	!-- Check netcdf precison
	2514	ldum = .FALSE.
	2515	CALL define_netcdf_header( 'ch', ldum, 0 )
	2516
	2517	!
	2518	!-- Check, whether a constant diffusion coefficient shall be used
	2519	IF ( km_constant /= -1.0 ) THEN
	2520	IF ( km_constant < 0.0 ) THEN
[215]	2521	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2522	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2523	ELSE
	2524	IF ( prandtl_number < 0.0 ) THEN
[215]	2525	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2526	' < 0.0'
[226]	2527	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2528	ENDIF
	2529	constant_diffusion = .TRUE.
	2530
	2531	IF ( prandtl_layer ) THEN
[215]	2532	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2533	'value of km'
[226]	2534	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2535	ENDIF
	2536	ENDIF
	2537	ENDIF
	2538
	2539	!
	2540	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2541	!-- for the horizontal diffusivity used within the outflow damping layer,
	2542	!-- and check/set the width of the damping layer
	2543	IF ( bc_lr /= 'cyclic' ) THEN
	2544	IF ( km_damp_max == -1.0 ) THEN
	2545	km_damp_max = 0.5 * dx
	2546	ENDIF
	2547	IF ( outflow_damping_width == -1.0 ) THEN
	2548	outflow_damping_width = MIN( 20, nx/2 )
	2549	ENDIF
	2550	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2551	message_string = 'outflow_damping width out of range'
[226]	2552	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2553	ENDIF
	2554	ENDIF
	2555
	2556	IF ( bc_ns /= 'cyclic' ) THEN
	2557	IF ( km_damp_max == -1.0 ) THEN
	2558	km_damp_max = 0.5 * dy
	2559	ENDIF
	2560	IF ( outflow_damping_width == -1.0 ) THEN
	2561	outflow_damping_width = MIN( 20, ny/2 )
	2562	ENDIF
	2563	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2564	message_string = 'outflow_damping width out of range'
[226]	2565	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2566	ENDIF
	2567	ENDIF
	2568
	2569	!
	2570	!-- Check value range for rif
	2571	IF ( rif_min >= rif_max ) THEN
[215]	2572	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2573	'than rif_max = ', rif_max
[226]	2574	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2575	ENDIF
	2576
	2577	!
	2578	!-- Determine upper and lower hight level indices for random perturbations
[97]	2579	IF ( disturbance_level_b == -9999999.9 ) THEN
	2580	IF ( ocean ) THEN
	2581	disturbance_level_b = zu((nzt*2)/3)
	2582	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2583	ELSE
	2584	disturbance_level_b = zu(nzb+3)
	2585	disturbance_level_ind_b = nzb + 3
	2586	ENDIF
[1]	2587	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2588	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2589	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2590	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2591	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2592	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2593	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2594	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2595	ELSE
	2596	DO k = 3, nzt-2
	2597	IF ( disturbance_level_b <= zu(k) ) THEN
	2598	disturbance_level_ind_b = k
	2599	EXIT
	2600	ENDIF
	2601	ENDDO
	2602	ENDIF
	2603
[97]	2604	IF ( disturbance_level_t == -9999999.9 ) THEN
	2605	IF ( ocean ) THEN
	2606	disturbance_level_t = zu(nzt-3)
	2607	disturbance_level_ind_t = nzt - 3
	2608	ELSE
	2609	disturbance_level_t = zu(nzt/3)
	2610	disturbance_level_ind_t = nzt / 3
	2611	ENDIF
[1]	2612	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2613	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2614	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2615	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2616	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2617	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2618	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2619	disturbance_level_b
[226]	2620	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2621	ELSE
	2622	DO k = 3, nzt-2
	2623	IF ( disturbance_level_t <= zu(k) ) THEN
	2624	disturbance_level_ind_t = k
	2625	EXIT
	2626	ENDIF
	2627	ENDDO
	2628	ENDIF
	2629
	2630	!
	2631	!-- Check again whether the levels determined this way are ok.
	2632	!-- Error may occur at automatic determination and too few grid points in
	2633	!-- z-direction.
	2634	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2635	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2636	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2637	disturbance_level_b
[226]	2638	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2639	ENDIF
	2640
	2641	!
	2642	!-- Determine the horizontal index range for random perturbations.
	2643	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2644	!-- near the inflow and the perturbation area is further limited to ...(1)
	2645	!-- after the initial phase of the flow.
	2646	dist_nxl = 0; dist_nxr = nx
	2647	dist_nys = 0; dist_nyn = ny
	2648	IF ( bc_lr /= 'cyclic' ) THEN
	2649	IF ( inflow_disturbance_begin == -1 ) THEN
	2650	inflow_disturbance_begin = MIN( 10, nx/2 )
	2651	ENDIF
	2652	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2653	THEN
[215]	2654	message_string = 'inflow_disturbance_begin out of range'
[226]	2655	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2656	ENDIF
	2657	IF ( inflow_disturbance_end == -1 ) THEN
	2658	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2659	ENDIF
	2660	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2661	THEN
[215]	2662	message_string = 'inflow_disturbance_end out of range'
[226]	2663	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2664	ENDIF
	2665	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2666	IF ( inflow_disturbance_begin == -1 ) THEN
	2667	inflow_disturbance_begin = MIN( 10, ny/2 )
	2668	ENDIF
	2669	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2670	THEN
[215]	2671	message_string = 'inflow_disturbance_begin out of range'
[226]	2672	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2673	ENDIF
	2674	IF ( inflow_disturbance_end == -1 ) THEN
	2675	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2676	ENDIF
	2677	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2678	THEN
[215]	2679	message_string = 'inflow_disturbance_end out of range'
[226]	2680	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2681	ENDIF
	2682	ENDIF
	2683
[73]	2684	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2685	dist_nxr = nx - inflow_disturbance_begin
	2686	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2687	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2688	dist_nxl = inflow_disturbance_begin
	2689	dist_nxr(1) = inflow_disturbance_end
[73]	2690	ENDIF
	2691	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2692	dist_nyn = ny - inflow_disturbance_begin
	2693	dist_nys(1) = ny - inflow_disturbance_end
[73]	2694	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2695	dist_nys = inflow_disturbance_begin
	2696	dist_nyn(1) = inflow_disturbance_end
	2697	ENDIF
	2698
	2699	!
[151]	2700	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2701	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2702	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2703	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2704	'condition at the inflow boundary'
[226]	2705	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2706	ENDIF
	2707
	2708	!
	2709	!-- In case of turbulent inflow calculate the index of the recycling plane
	2710	IF ( turbulent_inflow ) THEN
	2711	IF ( recycling_width == 9999999.9 ) THEN
	2712	!
	2713	!-- Set the default value for the width of the recycling domain
	2714	recycling_width = 0.1 * nx * dx
	2715	ELSE
	2716	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2717	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2718	' ', recycling_width
[226]	2719	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	2720	ENDIF
	2721	ENDIF
	2722	!
	2723	!-- Calculate the index
	2724	recycling_plane = recycling_width / dx
	2725	ENDIF
	2726
	2727	!
[1]	2728	!-- Check random generator
	2729	IF ( random_generator /= 'system-specific' .AND. &
	2730	random_generator /= 'numerical-recipes' ) THEN
[215]	2731	message_string = 'unknown random generator: random_generator = "' // &
	2732	TRIM( random_generator ) // '"'
[226]	2733	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2734	ENDIF
	2735
	2736	!
	2737	!-- Determine damping level index for 1D model
	2738	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2739	IF ( damp_level_1d == -1.0 ) THEN
	2740	damp_level_1d = zu(nzt+1)
	2741	damp_level_ind_1d = nzt + 1
	2742	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2743	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2744	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	2745	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	2746	ELSE
	2747	DO k = 1, nzt+1
	2748	IF ( damp_level_1d <= zu(k) ) THEN
	2749	damp_level_ind_1d = k
	2750	EXIT
	2751	ENDIF
	2752	ENDDO
	2753	ENDIF
	2754	ENDIF
[215]	2755
[1]	2756	!
	2757	!-- Check some other 1d-model parameters
	2758	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2759	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2760	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2761	'" is unknown'
[226]	2762	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2763	ENDIF
	2764	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2765	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2766	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2767	'" is unknown'
[226]	2768	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2769	ENDIF
	2770
	2771	!
	2772	!-- Set time for the next user defined restart (time_restart is the
	2773	!-- internal parameter for steering restart events)
	2774	IF ( restart_time /= 9999999.9 ) THEN
	2775	IF ( restart_time > simulated_time ) time_restart = restart_time
	2776	ELSE
	2777	!
	2778	!-- In case of a restart run, set internal parameter to default (no restart)
	2779	!-- if the NAMELIST-parameter restart_time is omitted
	2780	time_restart = 9999999.9
	2781	ENDIF
	2782
	2783	!
	2784	!-- Set default value of the time needed to terminate a model run
	2785	IF ( termination_time_needed == -1.0 ) THEN
	2786	IF ( host(1:3) == 'ibm' ) THEN
	2787	termination_time_needed = 300.0
	2788	ELSE
	2789	termination_time_needed = 35.0
	2790	ENDIF
	2791	ENDIF
	2792
	2793	!
	2794	!-- Check the time needed to terminate a model run
	2795	IF ( host(1:3) == 't3e' ) THEN
	2796	!
	2797	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2798	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2799	IF ( termination_time_needed <= 30.0 ) THEN
[215]	2800	WRITE( message_string, * ) 'termination_time_needed = ', &
	2801	termination_time_needed, ' must be > 30.0 on host "', &
	2802	TRIM( host ), '"'
[226]	2803	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	2804	ENDIF
	2805	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2806	!
	2807	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2808	!-- because the job time consumed before executing palm (for compiling,
	2809	!-- copying of files, etc.) has to be regarded
	2810	IF ( termination_time_needed < 300.0 ) THEN
[215]	2811	WRITE( message_string, * ) 'termination_time_needed = ', &
	2812	termination_time_needed, ' should be >= 300.0 on host "', &
	2813	TRIM( host ), '"'
[226]	2814	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	2815	ENDIF
	2816	ENDIF
	2817
[217]	2818	!
[240]	2819	!-- Check pressure gradient conditions
	2820	IF ( dp_external .AND. conserve_volume_flow ) THEN
	2821	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
	2822	' are .TRUE. but one of them must be .FALSE.'
	2823	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	2824	ENDIF
	2825	IF ( dp_external ) THEN
	2826	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	2827	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	2828	' of range'
	2829	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	2830	ENDIF
	2831	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
	2832	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
	2833	', i.e. the external pressure gradient & will not be applied'
	2834	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	2835	ENDIF
	2836	ENDIF
	2837	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	2838	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	2839	'.FALSE., i.e. the external pressure gradient & will not be applied'
	2840	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	2841	ENDIF
[241]	2842	IF ( conserve_volume_flow ) THEN
	2843	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
	2844	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	2845	conserve_volume_flow_mode = 'inflow_profile'
	2846	ELSE
	2847	conserve_volume_flow_mode = 'initial_profiles'
	2848	ENDIF
	2849	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	2850	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	2851	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	2852	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	2853	conserve_volume_flow_mode
	2854	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	2855	ENDIF
	2856	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
	2857	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
	2858	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
	2859	'require & conserve_volume_flow_mode = ''inflow_profile'''
	2860	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	2861	ENDIF
	2862	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	2863	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	2864	WRITE( message_string, * ) 'cyclic boundary conditions ', &
	2865	'require & conserve_volume_flow_mode = ''initial_profiles''', &
	2866	' or ''bulk_velocity'''
	2867	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	2868	ENDIF
	2869	ENDIF
	2870	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	2871	( .NOT. conserve_volume_flow .OR. &
	2872	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	2873	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
	2874	'conserve_volume_flow = .T. and & ', &
	2875	'conserve_volume_flow_mode = ''bulk_velocity'''
	2876	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	2877	ENDIF
[240]	2878
	2879	!
[217]	2880	!-- Check &userpar parameters
	2881	CALL user_check_parameters
[1]	2882
[217]	2883
[1]	2884	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |