Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 237

Last change on this file since 237 was 232, checked in by raasch, 16 years ago
bugfix concerning output of p profile
Property svn:keywords set to `Id`
File size: 109.1 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[232]	6	! Bugfix: pressure included for profile output
[226]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: check_parameters.f90 232 2009-02-10 02:25:26Z raasch $
	11	!
	12	! 222 2009-01-12 16:04:16Z letzel
[217]	13	! +user_check_parameters
[213]	14	! Output of messages replaced by message handling routine.
[206]	15	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	16	! deleted __mpi2 directives
[222]	17	! Check that PALM is called with mrun -K parallel for coupling
[198]	18	!
	19	! 197 2008-09-16 15:29:03Z raasch
[177]	20	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	21	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	22	!
	23	! Strict grid matching along z is not needed for mg-solver.
[153]	24	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	25	! Case of reading data for recycling included in initializing_actions,
[197]	26	! check of turbulent_inflow and calculation of recycling_plane.
	27	! q*2 profile added
[139]	28	!
	29	! 138 2007-11-28 10:03:58Z letzel
[138]	30	! Plant canopy added
[132]	31	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	32	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	33	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	34	!
	35	! 109 2007-08-28 15:26:47Z letzel
[102]	36	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	37	! conditions for temperature and fluxes) in case of coupled runs.
	38	! +profiles for wp and w"e
[104]	39	! Bugfix: Error message concerning output of particle concentration (pc)
	40	! modified
[108]	41	! More checks and more default values for coupled runs
	42	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	43	! cloud_physics = .T.)
	44	! Rayleigh damping for ocean fixed.
[109]	45	! Check and, if necessary, set default value for dt_coupling
[98]	46	!
	47	! 97 2007-06-21 08:23:15Z raasch
[97]	48	! Initial salinity profile is calculated, salinity boundary conditions are
	49	! checked,
[94]	50	! z_max_do1d is checked only in case of ocean = .f.,
[97]	51	! +initial temperature and geostrophic velocity profiles for the ocean version,
	52	! use_pt_reference renamed use_reference
[77]	53	!
[90]	54	! 89 2007-05-25 12:08:31Z raasch
	55	! Check for user-defined profiles
	56	!
[77]	57	! 75 2007-03-22 09:54:05Z raasch
[51]	58	! "by_user" allowed as initializing action, -data_output_ts,
[63]	59	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	60	! and pt_reference are checked, moisture renamed humidity,
[72]	61	! output of precipitation amount/rate and roughnes length + check
[73]	62	! possible negative humidities are avoided in initial profile,
[75]	63	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	64	! revision added to run_description_header
[1]	65	!
[39]	66	! 20 2007-02-26 00:12:32Z raasch
	67	! Temperature and humidity gradients at top are now calculated for nzt+1,
	68	! top_heatflux and respective boundary condition bc_pt_t is checked
	69	!
[3]	70	! RCS Log replace by Id keyword, revision history cleaned up
	71	!
[1]	72	! Revision 1.61 2006/08/04 14:20:25 raasch
	73	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	74	! use_upstream_for_tke, default value for dt_dopts,
	75	! generation of file header moved from routines palm and header to here
	76	!
	77	! Revision 1.1 1997/08/26 06:29:23 raasch
	78	! Initial revision
	79	!
	80	!
	81	! Description:
	82	! ------------
	83	! Check control parameters and deduce further quantities.
	84	!------------------------------------------------------------------------------!
	85
	86	USE arrays_3d
	87	USE constants
	88	USE control_parameters
	89	USE grid_variables
	90	USE indices
	91	USE model_1d
	92	USE netcdf_control
	93	USE particle_attributes
	94	USE pegrid
	95	USE profil_parameter
	96	USE statistics
	97	USE transpose_indices
	98
	99	IMPLICIT NONE
	100
	101	CHARACTER (LEN=1) :: sq
	102	CHARACTER (LEN=6) :: var
	103	CHARACTER (LEN=7) :: unit
	104	CHARACTER (LEN=8) :: date
	105	CHARACTER (LEN=10) :: time
[102]	106	CHARACTER (LEN=40) :: coupling_string
[1]	107	CHARACTER (LEN=100) :: action
	108
[108]	109	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	110	position, prec
[1]	111	LOGICAL :: found, ldum
[108]	112	REAL :: gradient, maxn, maxp, remote = 0.0
[1]	113
	114	!
	115	!-- Warning, if host is not set
	116	IF ( host(1:1) == ' ' ) THEN
[213]	117	message_string = '"host" is not set. Please check that environment ' // &
	118	'variable "localhost" & is set before running PALM'
[226]	119	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	120	ENDIF
	121
	122	!
[102]	123	!-- Check the coupling mode
	124	IF ( coupling_mode /= 'uncoupled' .AND. &
	125	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	126	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	127	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	128	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	129	ENDIF
	130
	131	!
[108]	132	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	133	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	134
[108]	135	IF ( dt_coupling == 9999999.9 ) THEN
[213]	136	message_string = 'dt_coupling is not set but required for coup' // &
	137	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	138	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	139	ENDIF
[213]	140
[206]	141	#if defined( __parallel )
	142	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	143	ierr )
	144	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	145	status, ierr )
[108]	146	IF ( dt_coupling /= remote ) THEN
[213]	147	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	148	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	149	'dt_coupling_remote = ', remote
[226]	150	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	151	ENDIF
[109]	152	IF ( dt_coupling <= 0.0 ) THEN
[206]	153	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	154	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	155	status, ierr )
[109]	156	dt_coupling = MAX( dt_max, remote )
[213]	157	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	158	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	159	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	160	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	161	ENDIF
[213]	162
[206]	163	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	164	ierr )
	165	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	166	status, ierr )
[108]	167	IF ( restart_time /= remote ) THEN
[213]	168	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	169	'": restart_time = ', restart_time, '& is not equal to ', &
	170	'restart_time_remote = ', remote
[226]	171	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	172	ENDIF
[213]	173
[206]	174	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	175	ierr )
	176	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	177	status, ierr )
[108]	178	IF ( dt_restart /= remote ) THEN
[213]	179	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	180	'": dt_restart = ', dt_restart, '& is not equal to ', &
	181	'dt_restart_remote = ', remote
[226]	182	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	183	ENDIF
[213]	184
[206]	185	CALL MPI_SEND( end_time, 1, MPI_REAL, target_id, 14, comm_inter, ierr )
	186	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	187	status, ierr )
[108]	188	IF ( end_time /= remote ) THEN
[213]	189	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	190	'": end_time = ', end_time, '& is not equal to ', &
	191	'end_time_remote = ', remote
[226]	192	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	193	ENDIF
[213]	194
[206]	195	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	196	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	197	status, ierr )
[108]	198	IF ( dx /= remote ) THEN
[213]	199	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	200	'": dx = ', dx, '& is not equal to dx_remote = ', remote
[226]	201	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
[108]	202	ENDIF
[213]	203
[206]	204	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	205	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	206	status, ierr )
[108]	207	IF ( dy /= remote ) THEN
[213]	208	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	209	'": dy = ', dy, '& is not equal to dy_remote = ', remote
[226]	210	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
[108]	211	ENDIF
[213]	212
[206]	213	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	214	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	215	status, ierr )
[108]	216	IF ( nx /= iremote ) THEN
[213]	217	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	218	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
[226]	219	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
[108]	220	ENDIF
[213]	221
[206]	222	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	223	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	224	status, ierr )
[108]	225	IF ( ny /= iremote ) THEN
[213]	226	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	227	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
[226]	228	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
[108]	229	ENDIF
[222]	230	#else
	231	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	232	' ''mrun -K parallel'''
[226]	233	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	234	#endif
	235	ENDIF
	236
[206]	237	#if defined( __parallel )
[108]	238	!
	239	!-- Exchange via intercommunicator
	240	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	241	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	242	ierr )
[108]	243	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	244	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	245	comm_inter, status, ierr )
[108]	246	ENDIF
	247	#endif
	248
	249
	250	!
[1]	251	!-- Generate the file header which is used as a header for most of PALM's
	252	!-- output files
	253	CALL DATE_AND_TIME( date, time )
	254	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	255	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	256	IF ( coupling_mode == 'uncoupled' ) THEN
	257	coupling_string = ''
	258	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	259	coupling_string = ' coupled (atmosphere)'
	260	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	261	coupling_string = ' coupled (ocean)'
	262	ENDIF
[1]	263
[102]	264	WRITE ( run_description_header, &
	265	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	266	TRIM( version ), TRIM( revision ), 'run: ', &
	267	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	268	'host: ', TRIM( host ), run_date, run_time
[1]	269
	270	!
[63]	271	!-- Check the general loop optimization method
	272	IF ( loop_optimization == 'default' ) THEN
	273	IF ( host(1:3) == 'nec' ) THEN
	274	loop_optimization = 'vector'
	275	ELSE
	276	loop_optimization = 'cache'
	277	ENDIF
	278	ENDIF
	279	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	280	.AND. loop_optimization /= 'vector' ) THEN
[213]	281	message_string = 'illegal value given for loop_optimization: "' // &
	282	TRIM( loop_optimization ) // '"'
[226]	283	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	284	ENDIF
	285
	286	!
[1]	287	!-- Check topography setting (check for illegal parameter combinations)
	288	IF ( topography /= 'flat' ) THEN
	289	action = ' '
	290	IF ( scalar_advec /= 'pw-scheme' ) THEN
	291	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	292	ENDIF
	293	IF ( momentum_advec /= 'pw-scheme' ) THEN
	294	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	295	ENDIF
[51]	296	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	297	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	298	ENDIF
[114]	299	IF ( psolver == 'sor' ) THEN
[1]	300	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	301	ENDIF
	302	IF ( sloping_surface ) THEN
	303	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	304	ENDIF
	305	IF ( galilei_transformation ) THEN
	306	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	307	ENDIF
	308	IF ( cloud_physics ) THEN
	309	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	310	ENDIF
	311	IF ( cloud_droplets ) THEN
	312	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	313	ENDIF
[75]	314	IF ( humidity ) THEN
	315	WRITE( action, '(A)' ) 'humidity = .TRUE.'
[1]	316	ENDIF
	317	IF ( .NOT. prandtl_layer ) THEN
	318	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	319	ENDIF
	320	IF ( action /= ' ' ) THEN
[213]	321	message_string = 'a non-flat topography does not allow ' // &
	322	TRIM( action )
[226]	323	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	324	ENDIF
	325	ENDIF
[94]	326
[1]	327	!
[94]	328	!-- Check ocean setting
	329	IF ( ocean ) THEN
	330	action = ' '
	331	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	332	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	333	ENDIF
[97]	334	IF ( momentum_advec == 'ups-scheme' ) THEN
	335	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	336	ENDIF
[94]	337	IF ( action /= ' ' ) THEN
[213]	338	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	339	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	340	ENDIF
	341	ENDIF
	342
	343	!
[1]	344	!-- Check whether there are any illegal values
	345	!-- Pressure solver:
	346	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	347	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	348	message_string = 'unknown solver for perturbation pressure: psolver' // &
	349	' = "' // TRIM( psolver ) // '"'
[226]	350	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	351	ENDIF
	352
	353	#if defined( __parallel )
	354	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	355	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	356	'for a 1d domain-decomposition along x & please do' // &
	357	' not set npey/=1 in the parameter file'
[226]	358	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	359	ENDIF
[181]	360	IF ( psolver == 'poisfft_hybrid' .AND. &
	361	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	362	psolver == 'multigrid' .AND. &
	363	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	364	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	365	'work for subdomains with unequal size & please ' // &
	366	'set grid_matching = ''strict'' in the parameter file'
[226]	367	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	368	ENDIF
	369	#else
	370	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	371	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	372	' for a parallel environment'
[226]	373	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	374	ENDIF
	375	#endif
	376
	377	IF ( psolver == 'multigrid' ) THEN
	378	IF ( cycle_mg == 'w' ) THEN
	379	gamma_mg = 2
	380	ELSEIF ( cycle_mg == 'v' ) THEN
	381	gamma_mg = 1
	382	ELSE
[213]	383	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	384	TRIM( cycle_mg ) // '"'
[226]	385	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	386	ENDIF
	387	ENDIF
	388
	389	IF ( fft_method /= 'singleton-algorithm' .AND. &
	390	fft_method /= 'temperton-algorithm' .AND. &
	391	fft_method /= 'system-specific' ) THEN
[213]	392	message_string = 'unknown fft-algorithm: fft_method = "' // &
	393	TRIM( fft_method ) // '"'
[226]	394	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	395	ENDIF
	396
	397	!
	398	!-- Advection schemes:
	399	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	400	THEN
[214]	401	message_string = 'unknown advection scheme: momentum_advec = "' // &
	402	TRIM( momentum_advec ) // '"'
[226]	403	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	404	ENDIF
	405	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	406	.AND. timestep_scheme /= 'euler' ) THEN
[214]	407	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	408	'" is not allowed with timestep_scheme = "' // &
	409	TRIM( timestep_scheme ) // '"'
[226]	410	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	411	ENDIF
	412
	413	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	414	scalar_advec /= 'ups-scheme' ) THEN
[214]	415	message_string = 'unknown advection scheme: scalar_advec = "' // &
	416	TRIM( scalar_advec ) // '"'
[226]	417	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	418	ENDIF
	419
	420	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	421	use_upstream_for_tke = .TRUE.
[214]	422	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	423	'use_sgs_for_particles = .TRUE.'
[226]	424	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	425	ENDIF
	426
	427	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	428	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	429	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
[226]	430	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	431	ENDIF
	432
	433	!
	434	!-- Timestep schemes:
	435	SELECT CASE ( TRIM( timestep_scheme ) )
	436
	437	CASE ( 'euler' )
	438	intermediate_timestep_count_max = 1
	439	asselin_filter_factor = 0.0
	440
	441	CASE ( 'leapfrog', 'leapfrog+euler' )
	442	intermediate_timestep_count_max = 1
	443
	444	CASE ( 'runge-kutta-2' )
	445	intermediate_timestep_count_max = 2
	446	asselin_filter_factor = 0.0
	447
	448	CASE ( 'runge-kutta-3' )
	449	intermediate_timestep_count_max = 3
	450	asselin_filter_factor = 0.0
	451
	452	CASE DEFAULT
[214]	453	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	454	TRIM( timestep_scheme ) // '"'
[226]	455	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	456
	457	END SELECT
	458
[63]	459	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	460	THEN
[214]	461	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	462	'" & does not work with timestep_scheme "' // &
	463	TRIM( timestep_scheme ) // '"'
[226]	464	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	465	ENDIF
	466
	467	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	468	THEN
[214]	469	message_string = 'momentum advection scheme "' // &
	470	TRIM( momentum_advec ) // '" & does not work with ' // &
	471	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	472	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	473	ENDIF
	474
[147]	475	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	476	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
[1]	477	!
[214]	478	!-- No restart run: several initialising actions are possible
[1]	479	action = initializing_actions
	480	DO WHILE ( TRIM( action ) /= '' )
	481	position = INDEX( action, ' ' )
	482	SELECT CASE ( action(1:position-1) )
	483
	484	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	485	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	486	action = action(position+1:)
	487
	488	CASE DEFAULT
[214]	489	message_string = 'initializing_action = "' // &
	490	TRIM( action ) // '" unkown or not allowed'
[226]	491	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	492
	493	END SELECT
	494	ENDDO
	495	ENDIF
[214]	496
[1]	497	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	498	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	499	message_string = 'initializing_actions = "set_constant_profiles"' // &
	500	' and "set_1d-model_profiles" are not allowed ' // &
	501	'simultaneously'
[226]	502	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	503	ENDIF
[214]	504
[46]	505	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	506	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	507	message_string = 'initializing_actions = "set_constant_profiles"' // &
	508	' and "by_user" are not allowed simultaneously'
[226]	509	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	510	ENDIF
[214]	511
[46]	512	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	513	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	514	message_string = 'initializing_actions = "by_user" and ' // &
	515	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	516	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	517	ENDIF
[1]	518
[75]	519	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	520	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	521	'not allowed with humidity = ', humidity
[226]	522	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	523	ENDIF
	524
[72]	525	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	526	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	527	'not allowed with cloud_physics = ', cloud_physics
[226]	528	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	529	ENDIF
	530
[75]	531	IF ( humidity .AND. sloping_surface ) THEN
[214]	532	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	533	'are not allowed simultaneously'
[226]	534	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	535	ENDIF
	536
[75]	537	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	538	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
[226]	539	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	540	ENDIF
	541
[75]	542	IF ( passive_scalar .AND. humidity ) THEN
[214]	543	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	544	'is not allowed simultaneously'
[226]	545	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	546	ENDIF
	547
	548	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	549	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	550	' = .TRUE.'
[226]	551	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	552	ENDIF
	553
	554	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	555	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	556	'" found for parameter grid_matching'
[226]	557	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	558	ENDIF
	559
[138]	560	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	561	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	562	'coefficient & given value is drag_coefficient = 0.0'
[226]	563	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	564	ENDIF
	565
[1]	566	!
	567	!-- In case of no model continuation run, check initialising parameters and
	568	!-- deduce further quantities
	569	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	570
	571	!
	572	!-- Initial profiles for 1D and 3D model, respectively
	573	u_init = ug_surface
	574	v_init = vg_surface
	575	pt_init = pt_surface
[94]	576	IF ( humidity ) q_init = q_surface
	577	IF ( ocean ) sa_init = sa_surface
	578	IF ( passive_scalar ) q_init = s_surface
[138]	579	IF ( plant_canopy ) lad = 0.0
[1]	580
	581	!
	582	!--
	583	!-- If required, compute initial profile of the geostrophic wind
	584	!-- (component ug)
	585	i = 1
	586	gradient = 0.0
[97]	587
	588	IF ( .NOT. ocean ) THEN
	589
	590	ug_vertical_gradient_level_ind(1) = 0
	591	ug(0) = ug_surface
	592	DO k = 1, nzt+1
[177]	593	IF ( i < 11 ) THEN
	594	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	595	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	596	gradient = ug_vertical_gradient(i) / 100.0
	597	ug_vertical_gradient_level_ind(i) = k - 1
	598	i = i + 1
[1]	599	ENDIF
[177]	600	ENDIF
[97]	601	IF ( gradient /= 0.0 ) THEN
	602	IF ( k /= 1 ) THEN
	603	ug(k) = ug(k-1) + dzu(k) * gradient
	604	ELSE
	605	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	606	ENDIF
[1]	607	ELSE
[97]	608	ug(k) = ug(k-1)
[1]	609	ENDIF
[97]	610	ENDDO
[1]	611
[97]	612	ELSE
	613
	614	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	615	ug(nzt+1) = ug_surface
[97]	616	DO k = nzt, 0, -1
[177]	617	IF ( i < 11 ) THEN
	618	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	619	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	620	gradient = ug_vertical_gradient(i) / 100.0
	621	ug_vertical_gradient_level_ind(i) = k + 1
	622	i = i + 1
[97]	623	ENDIF
	624	ENDIF
	625	IF ( gradient /= 0.0 ) THEN
	626	IF ( k /= nzt ) THEN
	627	ug(k) = ug(k+1) - dzu(k+1) * gradient
	628	ELSE
	629	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	630	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	631	ENDIF
	632	ELSE
	633	ug(k) = ug(k+1)
	634	ENDIF
	635	ENDDO
	636
	637	ENDIF
	638
[1]	639	u_init = ug
	640
	641	!
	642	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	643	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	644	ug_vertical_gradient_level(1) = 0.0
	645	ENDIF
	646
	647	!
	648	!--
	649	!-- If required, compute initial profile of the geostrophic wind
	650	!-- (component vg)
	651	i = 1
	652	gradient = 0.0
[97]	653
	654	IF ( .NOT. ocean ) THEN
	655
	656	vg_vertical_gradient_level_ind(1) = 0
	657	vg(0) = vg_surface
	658	DO k = 1, nzt+1
[177]	659	IF ( i < 11 ) THEN
	660	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	661	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	662	gradient = vg_vertical_gradient(i) / 100.0
	663	vg_vertical_gradient_level_ind(i) = k - 1
	664	i = i + 1
[1]	665	ENDIF
	666	ENDIF
[97]	667	IF ( gradient /= 0.0 ) THEN
	668	IF ( k /= 1 ) THEN
	669	vg(k) = vg(k-1) + dzu(k) * gradient
	670	ELSE
	671	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	672	ENDIF
[1]	673	ELSE
[97]	674	vg(k) = vg(k-1)
[1]	675	ENDIF
[97]	676	ENDDO
[1]	677
[97]	678	ELSE
	679
[121]	680	vg_vertical_gradient_level_ind(1) = nzt+1
	681	vg(nzt+1) = vg_surface
[97]	682	DO k = nzt, 0, -1
[177]	683	IF ( i < 11 ) THEN
	684	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	685	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	686	gradient = vg_vertical_gradient(i) / 100.0
	687	vg_vertical_gradient_level_ind(i) = k + 1
	688	i = i + 1
[97]	689	ENDIF
	690	ENDIF
	691	IF ( gradient /= 0.0 ) THEN
	692	IF ( k /= nzt ) THEN
	693	vg(k) = vg(k+1) - dzu(k+1) * gradient
	694	ELSE
	695	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	696	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	697	ENDIF
	698	ELSE
	699	vg(k) = vg(k+1)
	700	ENDIF
	701	ENDDO
	702
	703	ENDIF
	704
[1]	705	v_init = vg
	706
	707	!
	708	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	709	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	710	vg_vertical_gradient_level(1) = 0.0
	711	ENDIF
	712
	713	!
[94]	714	!-- Compute initial temperature profile using the given temperature gradients
[1]	715	i = 1
	716	gradient = 0.0
[94]	717
	718	IF ( .NOT. ocean ) THEN
	719
	720	pt_vertical_gradient_level_ind(1) = 0
	721	DO k = 1, nzt+1
[177]	722	IF ( i < 11 ) THEN
	723	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	724	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	725	gradient = pt_vertical_gradient(i) / 100.0
	726	pt_vertical_gradient_level_ind(i) = k - 1
	727	i = i + 1
[1]	728	ENDIF
	729	ENDIF
[94]	730	IF ( gradient /= 0.0 ) THEN
	731	IF ( k /= 1 ) THEN
	732	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	733	ELSE
	734	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	735	ENDIF
[1]	736	ELSE
[94]	737	pt_init(k) = pt_init(k-1)
[1]	738	ENDIF
[94]	739	ENDDO
[1]	740
[94]	741	ELSE
	742
	743	pt_vertical_gradient_level_ind(1) = nzt+1
	744	DO k = nzt, 0, -1
[177]	745	IF ( i < 11 ) THEN
	746	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	747	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	748	gradient = pt_vertical_gradient(i) / 100.0
	749	pt_vertical_gradient_level_ind(i) = k + 1
	750	i = i + 1
[94]	751	ENDIF
	752	ENDIF
	753	IF ( gradient /= 0.0 ) THEN
	754	IF ( k /= nzt ) THEN
	755	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	756	ELSE
	757	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	758	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	759	ENDIF
	760	ELSE
	761	pt_init(k) = pt_init(k+1)
	762	ENDIF
	763	ENDDO
	764
	765	ENDIF
	766
[1]	767	!
	768	!-- In case of no given temperature gradients, choose gradient of neutral
	769	!-- stratification
[94]	770	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	771	pt_vertical_gradient_level(1) = 0.0
	772	ENDIF
	773
	774	!
[94]	775	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	776	!-- boundary condition
[19]	777	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	778
	779	!
	780	!-- If required, compute initial humidity or scalar profile using the given
	781	!-- humidity/scalar gradient. In case of scalar transport, initially store
	782	!-- values of the scalar parameters on humidity parameters
	783	IF ( passive_scalar ) THEN
	784	bc_q_b = bc_s_b
	785	bc_q_t = bc_s_t
	786	q_surface = s_surface
	787	q_surface_initial_change = s_surface_initial_change
	788	q_vertical_gradient = s_vertical_gradient
	789	q_vertical_gradient_level = s_vertical_gradient_level
	790	surface_waterflux = surface_scalarflux
	791	ENDIF
	792
[75]	793	IF ( humidity .OR. passive_scalar ) THEN
[1]	794
	795	i = 1
	796	gradient = 0.0
	797	q_vertical_gradient_level_ind(1) = 0
	798	DO k = 1, nzt+1
[177]	799	IF ( i < 11 ) THEN
	800	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	801	q_vertical_gradient_level(i) >= 0.0 ) THEN
	802	gradient = q_vertical_gradient(i) / 100.0
	803	q_vertical_gradient_level_ind(i) = k - 1
	804	i = i + 1
[1]	805	ENDIF
	806	ENDIF
	807	IF ( gradient /= 0.0 ) THEN
	808	IF ( k /= 1 ) THEN
	809	q_init(k) = q_init(k-1) + dzu(k) * gradient
	810	ELSE
	811	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	812	ENDIF
	813	ELSE
	814	q_init(k) = q_init(k-1)
	815	ENDIF
[72]	816	!
	817	!-- Avoid negative humidities
	818	IF ( q_init(k) < 0.0 ) THEN
	819	q_init(k) = 0.0
	820	ENDIF
[1]	821	ENDDO
	822
	823	!
	824	!-- In case of no given humidity gradients, choose zero gradient
	825	!-- conditions
	826	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	827	q_vertical_gradient_level(1) = 0.0
	828	ENDIF
	829
	830	!
	831	!-- Store humidity gradient at the top boundary for possile Neumann
	832	!-- boundary condition
[19]	833	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	834
	835	ENDIF
	836
[94]	837	!
	838	!-- If required, compute initial salinity profile using the given salinity
	839	!-- gradients
	840	IF ( ocean ) THEN
	841
	842	i = 1
	843	gradient = 0.0
	844
	845	sa_vertical_gradient_level_ind(1) = nzt+1
	846	DO k = nzt, 0, -1
[177]	847	IF ( i < 11 ) THEN
	848	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	849	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	850	gradient = sa_vertical_gradient(i) / 100.0
	851	sa_vertical_gradient_level_ind(i) = k + 1
	852	i = i + 1
[94]	853	ENDIF
	854	ENDIF
	855	IF ( gradient /= 0.0 ) THEN
	856	IF ( k /= nzt ) THEN
	857	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	858	ELSE
	859	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	860	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	861	ENDIF
	862	ELSE
	863	sa_init(k) = sa_init(k+1)
	864	ENDIF
	865	ENDDO
	866
	867	ENDIF
	868
[138]	869	!
	870	!-- If required compute the profile of leaf area density used in the plant canopy model
	871	IF ( plant_canopy ) THEN
	872
	873	i = 1
	874	gradient = 0.0
[1]	875
[138]	876	IF ( .NOT. ocean ) THEN
[153]	877
	878	lad(0) = lad_surface
[138]	879
	880	lad_vertical_gradient_level_ind(1) = 0
	881	DO k = 1, pch_index
[177]	882	IF ( i < 11 ) THEN
	883	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	884	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	885	gradient = lad_vertical_gradient(i)
	886	lad_vertical_gradient_level_ind(i) = k - 1
	887	i = i + 1
[138]	888	ENDIF
	889	ENDIF
	890	IF ( gradient /= 0.0 ) THEN
	891	IF ( k /= 1 ) THEN
	892	lad(k) = lad(k-1) + dzu(k) * gradient
	893	ELSE
	894	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	895	ENDIF
	896	ELSE
	897	lad(k) = lad(k-1)
	898	ENDIF
	899	ENDDO
	900
	901	ENDIF
	902
[1]	903	!
[138]	904	!-- In case of no given leaf area density gradients, choose a vanishing gradient
	905	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	906	lad_vertical_gradient_level(1) = 0.0
	907	ENDIF
	908
	909	ENDIF
	910
	911	ENDIF
	912
	913	!
[1]	914	!-- Compute Coriolis parameter
	915	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	916	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	917
	918	!
[97]	919	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	920	!-- set the reference temperature equal to the surface temperature.
	921	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	922
	923	!
[97]	924	!-- Reference value has to be used in buoyancy terms
	925	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	926
	927	!
	928	!-- Sign of buoyancy/stability terms
	929	IF ( ocean ) atmos_ocean_sign = -1.0
	930
	931	!
[108]	932	!-- Ocean version must use flux boundary conditions at the top
	933	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	934	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	935	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	936	ENDIF
[97]	937
	938	!
[1]	939	!-- In case of a given slope, compute the relevant quantities
	940	IF ( alpha_surface /= 0.0 ) THEN
	941	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	942	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	943	' ) must be < 90.0'
[226]	944	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	945	ENDIF
	946	sloping_surface = .TRUE.
	947	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	948	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	949	ENDIF
	950
	951	!
	952	!-- Check time step and cfl_factor
	953	IF ( dt /= -1.0 ) THEN
	954	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	955	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	956	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	957	ENDIF
	958	dt_3d = dt
	959	dt_fixed = .TRUE.
	960	ENDIF
	961
	962	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	963	IF ( cfl_factor == -1.0 ) THEN
	964	IF ( momentum_advec == 'ups-scheme' .OR. &
	965	scalar_advec == 'ups-scheme' ) THEN
	966	cfl_factor = 0.8
	967	ELSE
	968	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	969	cfl_factor = 0.8
	970	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	971	cfl_factor = 0.9
	972	ELSE
	973	cfl_factor = 0.1
	974	ENDIF
	975	ENDIF
	976	ELSE
[215]	977	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	978	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	979	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	980	ENDIF
	981	ENDIF
	982
	983	!
	984	!-- Store simulated time at begin
	985	simulated_time_at_begin = simulated_time
	986
	987	!
	988	!-- Set wind speed in the Galilei-transformed system
	989	IF ( galilei_transformation ) THEN
	990	IF ( use_ug_for_galilei_tr .AND. &
	991	ug_vertical_gradient_level(1) == 0.0 .AND. &
	992	vg_vertical_gradient_level(1) == 0.0 ) THEN
	993	u_gtrans = ug_surface
	994	v_gtrans = vg_surface
	995	ELSEIF ( use_ug_for_galilei_tr .AND. &
	996	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	997	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	998	' with galilei transformation'
[226]	999	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1000	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1001	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1002	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1003	' with galilei transformation'
[226]	1004	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1005	ELSE
[215]	1006	message_string = 'variable translation speed used for galilei-' // &
	1007	'transformation, which may cause & instabilities in stably ' // &
	1008	'stratified regions'
[226]	1009	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1010	ENDIF
	1011	ENDIF
	1012
	1013	!
	1014	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1015	!-- fluxes have to be used in the diffusion-terms
	1016	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1017
	1018	!
	1019	!-- Check boundary conditions and set internal variables:
	1020	!-- Lateral boundary conditions
[73]	1021	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1022	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1023	message_string = 'unknown boundary condition: bc_lr = "' // &
	1024	TRIM( bc_lr ) // '"'
[226]	1025	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1026	ENDIF
[73]	1027	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1028	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1029	message_string = 'unknown boundary condition: bc_ns = "' // &
	1030	TRIM( bc_ns ) // '"'
[226]	1031	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1032	ENDIF
	1033
	1034	!
	1035	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1036	!-- Willimas advection scheme. Several schemes and tools do not work with
	1037	!-- non-cyclic boundary conditions.
	1038	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1039	IF ( psolver /= 'multigrid' ) THEN
[215]	1040	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1041	'psolver = "' // TRIM( psolver ) // '"'
[226]	1042	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1043	ENDIF
	1044	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1045	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1046	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1047	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1048	ENDIF
	1049	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1050	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1051	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1052	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1053	ENDIF
	1054	IF ( galilei_transformation ) THEN
[215]	1055	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1056	'galilei_transformation = .T.'
[226]	1057	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1058	ENDIF
	1059	ENDIF
	1060
	1061	!
	1062	!-- Bottom boundary condition for the turbulent Kinetic energy
	1063	IF ( bc_e_b == 'neumann' ) THEN
	1064	ibc_e_b = 1
	1065	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1066	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
[226]	1067	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
[1]	1068	ENDIF
	1069	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1070	ibc_e_b = 2
	1071	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1072	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1073	TRIM( bc_e_b ) // '"'
[226]	1074	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1075	ENDIF
	1076	IF ( .NOT. prandtl_layer ) THEN
	1077	bc_e_b = 'neumann'
	1078	ibc_e_b = 1
[215]	1079	message_string = 'boundary condition bc_e_b changed to "' // &
	1080	TRIM( bc_e_b ) // '"'
[226]	1081	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1082	ENDIF
	1083	ELSE
[215]	1084	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1085	TRIM( bc_e_b ) // '"'
[226]	1086	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1087	ENDIF
	1088
	1089	!
	1090	!-- Boundary conditions for perturbation pressure
	1091	IF ( bc_p_b == 'dirichlet' ) THEN
	1092	ibc_p_b = 0
	1093	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1094	ibc_p_b = 1
	1095	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1096	ibc_p_b = 2
	1097	ELSE
[215]	1098	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1099	TRIM( bc_p_b ) // '"'
[226]	1100	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1101	ENDIF
	1102	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1103	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1104	'" not allowed with prandtl_layer = .FALSE.'
[226]	1105	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1106	ENDIF
	1107	IF ( bc_p_t == 'dirichlet' ) THEN
	1108	ibc_p_t = 0
	1109	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1110	ibc_p_t = 1
	1111	ELSE
[215]	1112	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1113	TRIM( bc_p_t ) // '"'
[226]	1114	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1115	ENDIF
	1116
	1117	!
	1118	!-- Boundary conditions for potential temperature
[102]	1119	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1120	ibc_pt_b = 2
[1]	1121	ELSE
[102]	1122	IF ( bc_pt_b == 'dirichlet' ) THEN
	1123	ibc_pt_b = 0
	1124	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1125	ibc_pt_b = 1
	1126	ELSE
[215]	1127	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1128	TRIM( bc_pt_b ) // '"'
[226]	1129	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1130	ENDIF
	1131	ENDIF
[102]	1132
[1]	1133	IF ( bc_pt_t == 'dirichlet' ) THEN
	1134	ibc_pt_t = 0
	1135	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1136	ibc_pt_t = 1
[19]	1137	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1138	ibc_pt_t = 2
[1]	1139	ELSE
[215]	1140	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1141	TRIM( bc_pt_t ) // '"'
[226]	1142	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1143	ENDIF
	1144
[20]	1145	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1146	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1147	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1148	top_momentumflux_v /= 9999999.9 ) THEN
	1149	constant_top_momentumflux = .TRUE.
	1150	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1151	top_momentumflux_v == 9999999.9 ) ) THEN
	1152	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1153	'must be set'
[226]	1154	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1155	ENDIF
[1]	1156
	1157	!
	1158	!-- A given surface temperature implies Dirichlet boundary condition for
	1159	!-- temperature. In this case specification of a constant heat flux is
	1160	!-- forbidden.
	1161	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1162	surface_heatflux /= 0.0 ) THEN
[215]	1163	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1164	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1165	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1166	ENDIF
	1167	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1168	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1169	'wed with pt_surface_initial_change (/=0) = ', &
	1170	pt_surface_initial_change
[226]	1171	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1172	ENDIF
	1173
	1174	!
[19]	1175	!-- A given temperature at the top implies Dirichlet boundary condition for
	1176	!-- temperature. In this case specification of a constant heat flux is
	1177	!-- forbidden.
	1178	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1179	top_heatflux /= 0.0 ) THEN
[215]	1180	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1181	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1182	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1183	ENDIF
	1184
	1185	!
[95]	1186	!-- Boundary conditions for salinity
	1187	IF ( ocean ) THEN
	1188	IF ( bc_sa_t == 'dirichlet' ) THEN
	1189	ibc_sa_t = 0
	1190	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1191	ibc_sa_t = 1
	1192	ELSE
[215]	1193	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1194	TRIM( bc_sa_t ) // '"'
[226]	1195	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1196	ENDIF
	1197
	1198	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1199	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1200	message_string = 'boundary condition: bc_sa_t = "' // &
	1201	TRIM( bc_sa_t ) // '" requires to set ' // &
	1202	'top_salinityflux'
[226]	1203	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1204	ENDIF
[95]	1205
	1206	!
	1207	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1208	!-- salinity. In this case specification of a constant salinity flux is
	1209	!-- forbidden.
	1210	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1211	top_salinityflux /= 0.0 ) THEN
[215]	1212	message_string = 'boundary condition: bc_sa_t = "' // &
	1213	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1214	'constant_top_salinityflux = .TRUE.'
[226]	1215	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1216	ENDIF
	1217
	1218	ENDIF
	1219
	1220	!
[75]	1221	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1222	!-- water content / scalar
[75]	1223	IF ( humidity .OR. passive_scalar ) THEN
	1224	IF ( humidity ) THEN
[1]	1225	sq = 'q'
	1226	ELSE
	1227	sq = 's'
	1228	ENDIF
	1229	IF ( bc_q_b == 'dirichlet' ) THEN
	1230	ibc_q_b = 0
	1231	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1232	ibc_q_b = 1
	1233	ELSE
[215]	1234	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1235	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1236	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1237	ENDIF
	1238	IF ( bc_q_t == 'dirichlet' ) THEN
	1239	ibc_q_t = 0
	1240	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1241	ibc_q_t = 1
	1242	ELSE
[215]	1243	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1244	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1245	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1246	ENDIF
	1247
	1248	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1249
	1250	!
	1251	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1252	!-- humidity. In this case specification of a constant water flux is
[1]	1253	!-- forbidden.
	1254	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1255	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1256	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1257	'th prescribed surface flux'
[226]	1258	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1259	ENDIF
	1260	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1261	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1262	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1263	q_surface_initial_change
[226]	1264	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1265	ENDIF
	1266
	1267	ENDIF
	1268
	1269	!
	1270	!-- Boundary conditions for horizontal components of wind speed
	1271	IF ( bc_uv_b == 'dirichlet' ) THEN
	1272	ibc_uv_b = 0
	1273	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1274	ibc_uv_b = 1
	1275	IF ( prandtl_layer ) THEN
[215]	1276	message_string = 'boundary condition: bc_uv_b = "' // &
	1277	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1278	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1279	ENDIF
	1280	ELSE
[215]	1281	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1282	TRIM( bc_uv_b ) // '"'
[226]	1283	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1284	ENDIF
[215]	1285
[108]	1286	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1287	bc_uv_t = 'neumann'
[1]	1288	ibc_uv_t = 1
	1289	ELSE
[132]	1290	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1291	ibc_uv_t = 0
	1292	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1293	ibc_uv_t = 1
	1294	ELSE
[215]	1295	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1296	TRIM( bc_uv_t ) // '"'
[226]	1297	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1298	ENDIF
	1299	ENDIF
	1300
	1301	!
	1302	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1303	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1304	IF ( momentum_advec == 'ups-scheme' ) THEN
	1305	rayleigh_damping_factor = 0.01
	1306	ELSE
	1307	rayleigh_damping_factor = 0.0
	1308	ENDIF
	1309	ELSE
	1310	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1311	THEN
[215]	1312	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1313	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1314	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1315	ENDIF
	1316	ENDIF
	1317
	1318	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1319	IF ( .NOT. ocean ) THEN
	1320	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1321	ELSE
	1322	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1323	ENDIF
[1]	1324	ELSE
[108]	1325	IF ( .NOT. ocean ) THEN
	1326	IF ( rayleigh_damping_height < 0.0 .OR. &
	1327	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1328	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1329	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1330	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1331	ENDIF
[108]	1332	ELSE
	1333	IF ( rayleigh_damping_height > 0.0 .OR. &
	1334	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1335	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1336	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1337	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1338	ENDIF
[1]	1339	ENDIF
	1340	ENDIF
	1341
	1342	!
	1343	!-- Check limiters for Upstream-Spline scheme
	1344	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1345	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1346	overshoot_limit_e < 0.0 ) THEN
[215]	1347	message_string = 'overshoot_limit_... < 0.0 is not allowed'
[226]	1348	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1349	ENDIF
	1350	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1351	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1352	message_string = 'ups_limit_... < 0.0 is not allowed'
[226]	1353	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1354	ENDIF
	1355
	1356	!
	1357	!-- Check number of chosen statistic regions. More than 10 regions are not
	1358	!-- allowed, because so far no more than 10 corresponding output files can
	1359	!-- be opened (cf. check_open)
	1360	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1361	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1362	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1363	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1364	ENDIF
	1365	IF ( normalizing_region > statistic_regions .OR. &
	1366	normalizing_region < 0) THEN
[215]	1367	WRITE ( message_string, * ) 'normalizing_region = ', &
	1368	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1369	' (value of statistic_regions)'
[226]	1370	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1371	ENDIF
	1372
	1373	!
[116]	1374	!-- Check the interval for sorting particles.
	1375	!-- Using particles as cloud droplets requires sorting after each timestep.
	1376	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1377	dt_sort_particles = 0.0
[215]	1378	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1379	'_droplets = .TRUE.'
[226]	1380	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1381	ENDIF
	1382
	1383	!
[1]	1384	!-- Set the default intervals for data output, if necessary
	1385	!-- NOTE: dt_dosp has already been set in package_parin
	1386	IF ( dt_data_output /= 9999999.9 ) THEN
	1387	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1388	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1389	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1390	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1391	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1392	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1393	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1394	ENDIF
	1395
	1396	!
	1397	!-- Set the default skip time intervals for data output, if necessary
	1398	IF ( skip_time_dopr == 9999999.9 ) &
	1399	skip_time_dopr = skip_time_data_output
	1400	IF ( skip_time_dosp == 9999999.9 ) &
	1401	skip_time_dosp = skip_time_data_output
	1402	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1403	skip_time_do2d_xy = skip_time_data_output
	1404	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1405	skip_time_do2d_xz = skip_time_data_output
	1406	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1407	skip_time_do2d_yz = skip_time_data_output
	1408	IF ( skip_time_do3d == 9999999.9 ) &
	1409	skip_time_do3d = skip_time_data_output
	1410	IF ( skip_time_data_output_av == 9999999.9 ) &
	1411	skip_time_data_output_av = skip_time_data_output
	1412
	1413	!
	1414	!-- Check the average intervals (first for 3d-data, then for profiles and
	1415	!-- spectra)
	1416	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1417	WRITE( message_string, * ) 'averaging_interval = ', &
	1418	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1419	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1420	ENDIF
	1421
	1422	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1423	averaging_interval_pr = averaging_interval
	1424	ENDIF
	1425
	1426	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1427	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1428	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1429	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1430	ENDIF
	1431
	1432	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1433	averaging_interval_sp = averaging_interval
	1434	ENDIF
	1435
	1436	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1437	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1438	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1439	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1440	ENDIF
	1441
	1442	!
	1443	!-- Set the default interval for profiles entering the temporal average
	1444	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1445	dt_averaging_input_pr = dt_averaging_input
	1446	ENDIF
	1447
	1448	!
	1449	!-- Set the default interval for the output of timeseries to a reasonable
	1450	!-- value (tries to minimize the number of calls of flow_statistics)
	1451	IF ( dt_dots == 9999999.9 ) THEN
	1452	IF ( averaging_interval_pr == 0.0 ) THEN
	1453	dt_dots = MIN( dt_run_control, dt_dopr )
	1454	ELSE
	1455	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1456	ENDIF
	1457	ENDIF
	1458
	1459	!
	1460	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1461	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1462	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1463	dt_averaging_input, ' must be <= averaging_interval = ', &
	1464	averaging_interval
[226]	1465	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1466	ENDIF
	1467
	1468	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1469	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1470	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1471	averaging_interval_pr
[226]	1472	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1473	ENDIF
	1474
	1475	!
[72]	1476	!-- Set the default value for the integration interval of precipitation amount
	1477	IF ( precipitation ) THEN
	1478	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1479	precipitation_amount_interval = dt_do2d_xy
	1480	ELSE
	1481	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1482	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1483	precipitation_amount_interval, ' must not be larger than ', &
	1484	'dt_do2d_xy = ', dt_do2d_xy
[226]	1485	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1486	ENDIF
	1487	ENDIF
	1488	ENDIF
	1489
	1490	!
[1]	1491	!-- Determine the number of output profiles and check whether they are
	1492	!-- permissible
	1493	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1494
	1495	dopr_n = dopr_n + 1
	1496	i = dopr_n
	1497
	1498	!
	1499	!-- Determine internal profile number (for hom, homs)
	1500	!-- and store height levels
	1501	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1502
	1503	CASE ( 'u', '#u' )
	1504	dopr_index(i) = 1
[87]	1505	dopr_unit(i) = 'm/s'
[1]	1506	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1507	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1508	dopr_initial_index(i) = 5
	1509	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1510	data_output_pr(i) = data_output_pr(i)(2:)
	1511	ENDIF
	1512
	1513	CASE ( 'v', '#v' )
	1514	dopr_index(i) = 2
[87]	1515	dopr_unit(i) = 'm/s'
	1516	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1517	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1518	dopr_initial_index(i) = 6
	1519	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1520	data_output_pr(i) = data_output_pr(i)(2:)
	1521	ENDIF
	1522
	1523	CASE ( 'w' )
	1524	dopr_index(i) = 3
[87]	1525	dopr_unit(i) = 'm/s'
	1526	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1527
	1528	CASE ( 'pt', '#pt' )
	1529	IF ( .NOT. cloud_physics ) THEN
	1530	dopr_index(i) = 4
[87]	1531	dopr_unit(i) = 'K'
[1]	1532	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1533	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1534	dopr_initial_index(i) = 7
	1535	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1536	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1537	data_output_pr(i) = data_output_pr(i)(2:)
	1538	ENDIF
	1539	ELSE
	1540	dopr_index(i) = 43
[87]	1541	dopr_unit(i) = 'K'
[1]	1542	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1543	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1544	dopr_initial_index(i) = 28
	1545	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1546	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1547	data_output_pr(i) = data_output_pr(i)(2:)
	1548	ENDIF
	1549	ENDIF
	1550
	1551	CASE ( 'e' )
	1552	dopr_index(i) = 8
[87]	1553	dopr_unit(i) = 'm2/s2'
[1]	1554	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1555	hom(nzb,2,8,:) = 0.0
	1556
	1557	CASE ( 'km', '#km' )
	1558	dopr_index(i) = 9
[87]	1559	dopr_unit(i) = 'm2/s'
[1]	1560	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1561	hom(nzb,2,9,:) = 0.0
	1562	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1563	dopr_initial_index(i) = 23
	1564	hom(:,2,23,:) = hom(:,2,9,:)
	1565	data_output_pr(i) = data_output_pr(i)(2:)
	1566	ENDIF
	1567
	1568	CASE ( 'kh', '#kh' )
	1569	dopr_index(i) = 10
[87]	1570	dopr_unit(i) = 'm2/s'
[1]	1571	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1572	hom(nzb,2,10,:) = 0.0
	1573	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1574	dopr_initial_index(i) = 24
	1575	hom(:,2,24,:) = hom(:,2,10,:)
	1576	data_output_pr(i) = data_output_pr(i)(2:)
	1577	ENDIF
	1578
	1579	CASE ( 'l', '#l' )
	1580	dopr_index(i) = 11
[87]	1581	dopr_unit(i) = 'm'
[1]	1582	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1583	hom(nzb,2,11,:) = 0.0
	1584	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1585	dopr_initial_index(i) = 25
	1586	hom(:,2,25,:) = hom(:,2,11,:)
	1587	data_output_pr(i) = data_output_pr(i)(2:)
	1588	ENDIF
	1589
	1590	CASE ( 'w"u"' )
	1591	dopr_index(i) = 12
[87]	1592	dopr_unit(i) = 'm2/s2'
[1]	1593	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1594	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1595
	1596	CASE ( 'wu' )
	1597	dopr_index(i) = 13
[87]	1598	dopr_unit(i) = 'm2/s2'
[1]	1599	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1600
	1601	CASE ( 'w"v"' )
	1602	dopr_index(i) = 14
[87]	1603	dopr_unit(i) = 'm2/s2'
[1]	1604	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1605	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1606
	1607	CASE ( 'wv' )
	1608	dopr_index(i) = 15
[87]	1609	dopr_unit(i) = 'm2/s2'
[1]	1610	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1611
	1612	CASE ( 'w"pt"' )
	1613	dopr_index(i) = 16
[87]	1614	dopr_unit(i) = 'K m/s'
[1]	1615	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1616
	1617	CASE ( 'wpt' )
	1618	dopr_index(i) = 17
[87]	1619	dopr_unit(i) = 'K m/s'
[1]	1620	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1621
	1622	CASE ( 'wpt' )
	1623	dopr_index(i) = 18
[87]	1624	dopr_unit(i) = 'K m/s'
[1]	1625	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1626
	1627	CASE ( 'wu' )
	1628	dopr_index(i) = 19
[87]	1629	dopr_unit(i) = 'm2/s2'
[1]	1630	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1631	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1632
	1633	CASE ( 'wv' )
	1634	dopr_index(i) = 20
[87]	1635	dopr_unit(i) = 'm2/s2'
[1]	1636	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1637	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1638
	1639	CASE ( 'wptBC' )
	1640	dopr_index(i) = 21
[87]	1641	dopr_unit(i) = 'K m/s'
[1]	1642	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1643
	1644	CASE ( 'wptBC' )
	1645	dopr_index(i) = 22
[87]	1646	dopr_unit(i) = 'K m/s'
[1]	1647	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1648
[96]	1649	CASE ( 'sa', '#sa' )
	1650	IF ( .NOT. ocean ) THEN
[215]	1651	message_string = 'data_output_pr = ' // &
	1652	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1653	'lemented for ocean = .FALSE.'
[226]	1654	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	1655	ELSE
	1656	dopr_index(i) = 23
	1657	dopr_unit(i) = 'psu'
	1658	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1659	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1660	dopr_initial_index(i) = 26
	1661	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1662	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1663	data_output_pr(i) = data_output_pr(i)(2:)
	1664	ENDIF
	1665	ENDIF
	1666
[1]	1667	CASE ( 'u*2' )
	1668	dopr_index(i) = 30
[87]	1669	dopr_unit(i) = 'm2/s2'
[1]	1670	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1671
	1672	CASE ( 'v*2' )
	1673	dopr_index(i) = 31
[87]	1674	dopr_unit(i) = 'm2/s2'
[1]	1675	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1676
	1677	CASE ( 'w*2' )
	1678	dopr_index(i) = 32
[87]	1679	dopr_unit(i) = 'm2/s2'
[1]	1680	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1681
	1682	CASE ( 'pt*2' )
	1683	dopr_index(i) = 33
[87]	1684	dopr_unit(i) = 'K2'
[1]	1685	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1686
	1687	CASE ( 'e*' )
	1688	dopr_index(i) = 34
[87]	1689	dopr_unit(i) = 'm2/s2'
[1]	1690	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1691
	1692	CASE ( 'w2pt' )
	1693	dopr_index(i) = 35
[87]	1694	dopr_unit(i) = 'K m2/s2'
[1]	1695	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1696
	1697	CASE ( 'wpt2' )
	1698	dopr_index(i) = 36
[87]	1699	dopr_unit(i) = 'K2 m/s'
[1]	1700	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1701
	1702	CASE ( 'we' )
	1703	dopr_index(i) = 37
[87]	1704	dopr_unit(i) = 'm3/s3'
[1]	1705	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1706
	1707	CASE ( 'w*3' )
	1708	dopr_index(i) = 38
[87]	1709	dopr_unit(i) = 'm3/s3'
[1]	1710	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1711
	1712	CASE ( 'Sw' )
	1713	dopr_index(i) = 39
[89]	1714	dopr_unit(i) = 'none'
[1]	1715	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1716
[232]	1717	CASE ( 'p' )
	1718	dopr_index(i) = 40
	1719	dopr_unit(i) = 'Pa'
	1720	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	1721
[1]	1722	CASE ( 'q', '#q' )
[108]	1723	IF ( .NOT. humidity ) THEN
[215]	1724	message_string = 'data_output_pr = ' // &
	1725	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1726	'lemented for humidity = .FALSE.'
[226]	1727	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1728	ELSE
	1729	dopr_index(i) = 41
[87]	1730	dopr_unit(i) = 'kg/kg'
	1731	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1732	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1733	dopr_initial_index(i) = 26
	1734	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1735	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1736	data_output_pr(i) = data_output_pr(i)(2:)
	1737	ENDIF
	1738	ENDIF
	1739
	1740	CASE ( 's', '#s' )
	1741	IF ( .NOT. passive_scalar ) THEN
[215]	1742	message_string = 'data_output_pr = ' // &
	1743	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1744	'lemented for passive_scalar = .FALSE.'
[226]	1745	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1746	ELSE
	1747	dopr_index(i) = 41
[87]	1748	dopr_unit(i) = 'kg/m3'
	1749	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1750	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1751	dopr_initial_index(i) = 26
	1752	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1753	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1754	data_output_pr(i) = data_output_pr(i)(2:)
	1755	ENDIF
	1756	ENDIF
	1757
	1758	CASE ( 'qv', '#qv' )
	1759	IF ( .NOT. cloud_physics ) THEN
	1760	dopr_index(i) = 41
[87]	1761	dopr_unit(i) = 'kg/kg'
	1762	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1763	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1764	dopr_initial_index(i) = 26
	1765	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1766	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1767	data_output_pr(i) = data_output_pr(i)(2:)
	1768	ENDIF
	1769	ELSE
	1770	dopr_index(i) = 42
[87]	1771	dopr_unit(i) = 'kg/kg'
	1772	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1773	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1774	dopr_initial_index(i) = 27
	1775	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1776	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1777	data_output_pr(i) = data_output_pr(i)(2:)
	1778	ENDIF
	1779	ENDIF
	1780
	1781	CASE ( 'lpt', '#lpt' )
	1782	IF ( .NOT. cloud_physics ) THEN
[215]	1783	message_string = 'data_output_pr = ' // &
	1784	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1785	'lemented for cloud_physics = .FALSE.'
[226]	1786	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	1787	ELSE
	1788	dopr_index(i) = 4
[87]	1789	dopr_unit(i) = 'K'
[1]	1790	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1791	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1792	dopr_initial_index(i) = 7
	1793	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1794	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1795	data_output_pr(i) = data_output_pr(i)(2:)
	1796	ENDIF
	1797	ENDIF
	1798
	1799	CASE ( 'vpt', '#vpt' )
	1800	dopr_index(i) = 44
[87]	1801	dopr_unit(i) = 'K'
	1802	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1803	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1804	dopr_initial_index(i) = 29
	1805	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1806	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1807	data_output_pr(i) = data_output_pr(i)(2:)
	1808	ENDIF
	1809
	1810	CASE ( 'w"vpt"' )
	1811	dopr_index(i) = 45
[87]	1812	dopr_unit(i) = 'K m/s'
[1]	1813	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1814
	1815	CASE ( 'wvpt' )
	1816	dopr_index(i) = 46
[87]	1817	dopr_unit(i) = 'K m/s'
[1]	1818	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1819
	1820	CASE ( 'wvpt' )
	1821	dopr_index(i) = 47
[87]	1822	dopr_unit(i) = 'K m/s'
[1]	1823	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1824
	1825	CASE ( 'w"q"' )
[108]	1826	IF ( .NOT. humidity ) THEN
[215]	1827	message_string = 'data_output_pr = ' // &
	1828	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1829	'lemented for humidity = .FALSE.'
[226]	1830	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1831	ELSE
	1832	dopr_index(i) = 48
[87]	1833	dopr_unit(i) = 'kg/kg m/s'
[1]	1834	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1835	ENDIF
	1836
	1837	CASE ( 'wq' )
[108]	1838	IF ( .NOT. humidity ) THEN
[215]	1839	message_string = 'data_output_pr = ' // &
	1840	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1841	'lemented for humidity = .FALSE.'
[226]	1842	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1843	ELSE
	1844	dopr_index(i) = 49
[87]	1845	dopr_unit(i) = 'kg/kg m/s'
[1]	1846	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1847	ENDIF
	1848
	1849	CASE ( 'wq' )
[108]	1850	IF ( .NOT. humidity ) THEN
[215]	1851	message_string = 'data_output_pr = ' // &
	1852	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1853	'lemented for humidity = .FALSE.'
[226]	1854	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	1855	ELSE
	1856	dopr_index(i) = 50
[87]	1857	dopr_unit(i) = 'kg/kg m/s'
[1]	1858	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1859	ENDIF
	1860
	1861	CASE ( 'w"s"' )
	1862	IF ( .NOT. passive_scalar ) THEN
[215]	1863	message_string = 'data_output_pr = ' // &
	1864	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1865	'lemented for passive_scalar = .FALSE.'
[226]	1866	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1867	ELSE
	1868	dopr_index(i) = 48
[87]	1869	dopr_unit(i) = 'kg/m3 m/s'
[1]	1870	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1871	ENDIF
	1872
	1873	CASE ( 'ws' )
	1874	IF ( .NOT. passive_scalar ) THEN
[215]	1875	message_string = 'data_output_pr = ' // &
	1876	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1877	'lemented for passive_scalar = .FALSE.'
[226]	1878	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1879	ELSE
	1880	dopr_index(i) = 49
[87]	1881	dopr_unit(i) = 'kg/m3 m/s'
[1]	1882	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1883	ENDIF
	1884
	1885	CASE ( 'ws' )
	1886	IF ( .NOT. passive_scalar ) THEN
[215]	1887	message_string = 'data_output_pr = ' // &
	1888	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1889	'lemented for passive_scalar = .FALSE.'
[226]	1890	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	1891	ELSE
	1892	dopr_index(i) = 50
[87]	1893	dopr_unit(i) = 'kg/m3 m/s'
[1]	1894	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1895	ENDIF
	1896
	1897	CASE ( 'w"qv"' )
[75]	1898	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1899	THEN
	1900	dopr_index(i) = 48
[87]	1901	dopr_unit(i) = 'kg/kg m/s'
[1]	1902	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1903	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1904	dopr_index(i) = 51
[87]	1905	dopr_unit(i) = 'kg/kg m/s'
[1]	1906	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	1907	ELSE
[215]	1908	message_string = 'data_output_pr = ' // &
	1909	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1910	'lemented for cloud_physics = .FALSE. an&' // &
	1911	'd humidity = .FALSE.'
[226]	1912	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1913	ENDIF
	1914
	1915	CASE ( 'wqv' )
[75]	1916	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1917	THEN
	1918	dopr_index(i) = 49
[87]	1919	dopr_unit(i) = 'kg/kg m/s'
[1]	1920	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1921	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1922	dopr_index(i) = 52
[87]	1923	dopr_unit(i) = 'kg/kg m/s'
[1]	1924	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	1925	ELSE
[215]	1926	message_string = 'data_output_pr = ' // &
	1927	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1928	'lemented for cloud_physics = .FALSE. an&' // &
	1929	'd humidity = .FALSE.'
[226]	1930	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1931	ENDIF
	1932
	1933	CASE ( 'wqv' )
[75]	1934	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1935	THEN
	1936	dopr_index(i) = 50
[87]	1937	dopr_unit(i) = 'kg/kg m/s'
[1]	1938	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1939	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1940	dopr_index(i) = 53
[87]	1941	dopr_unit(i) = 'kg/kg m/s'
[1]	1942	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	1943	ELSE
[215]	1944	message_string = 'data_output_pr = ' // &
	1945	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1946	'lemented for cloud_physics = .FALSE. an&' // &
	1947	'd humidity = .FALSE.'
[226]	1948	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	1949	ENDIF
	1950
	1951	CASE ( 'ql' )
	1952	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	1953	message_string = 'data_output_pr = ' // &
	1954	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1955	'lemented for cloud_physics = .FALSE. or' // &
	1956	'&cloud_droplets = .FALSE.'
[226]	1957	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	1958	ELSE
	1959	dopr_index(i) = 54
[87]	1960	dopr_unit(i) = 'kg/kg'
[1]	1961	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	1962	ENDIF
	1963
	1964	CASE ( 'wuu*/dz' )
	1965	dopr_index(i) = 55
[87]	1966	dopr_unit(i) = 'm2/s3'
[1]	1967	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	1968
	1969	CASE ( 'wp/dz' )
	1970	dopr_index(i) = 56
[87]	1971	dopr_unit(i) = 'm2/s3'
[106]	1972	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1973
	1974	CASE ( 'w"e/dz' )
	1975	dopr_index(i) = 57
[87]	1976	dopr_unit(i) = 'm2/s3'
[1]	1977	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	1978
	1979	CASE ( 'u"pt"' )
	1980	dopr_index(i) = 58
[87]	1981	dopr_unit(i) = 'K m/s'
[1]	1982	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	1983
	1984	CASE ( 'upt' )
	1985	dopr_index(i) = 59
[87]	1986	dopr_unit(i) = 'K m/s'
[1]	1987	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	1988
	1989	CASE ( 'upt_t' )
	1990	dopr_index(i) = 60
[87]	1991	dopr_unit(i) = 'K m/s'
[1]	1992	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	1993
	1994	CASE ( 'v"pt"' )
	1995	dopr_index(i) = 61
[87]	1996	dopr_unit(i) = 'K m/s'
[1]	1997	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	1998
	1999	CASE ( 'vpt' )
	2000	dopr_index(i) = 62
[87]	2001	dopr_unit(i) = 'K m/s'
[1]	2002	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2003
	2004	CASE ( 'vpt_t' )
	2005	dopr_index(i) = 63
[87]	2006	dopr_unit(i) = 'K m/s'
[1]	2007	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2008
[96]	2009	CASE ( 'rho' )
	2010	dopr_index(i) = 64
	2011	dopr_unit(i) = 'kg/m3'
	2012	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2013
[96]	2014	CASE ( 'w"sa"' )
	2015	IF ( .NOT. ocean ) THEN
[215]	2016	message_string = 'data_output_pr = ' // &
	2017	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2018	'lemented for ocean = .FALSE.'
[226]	2019	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2020	ELSE
	2021	dopr_index(i) = 65
	2022	dopr_unit(i) = 'psu m/s'
	2023	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2024	ENDIF
	2025
	2026	CASE ( 'wsa' )
	2027	IF ( .NOT. ocean ) THEN
[215]	2028	message_string = 'data_output_pr = ' // &
	2029	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2030	'lemented for ocean = .FALSE.'
[226]	2031	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2032	ELSE
	2033	dopr_index(i) = 66
	2034	dopr_unit(i) = 'psu m/s'
	2035	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2036	ENDIF
	2037
	2038	CASE ( 'wsa' )
	2039	IF ( .NOT. ocean ) THEN
[215]	2040	message_string = 'data_output_pr = ' // &
	2041	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2042	'lemented for ocean = .FALSE.'
[226]	2043	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2044	ELSE
	2045	dopr_index(i) = 67
	2046	dopr_unit(i) = 'psu m/s'
	2047	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2048	ENDIF
	2049
[106]	2050	CASE ( 'wp' )
	2051	dopr_index(i) = 68
	2052	dopr_unit(i) = 'm3/s3'
	2053	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2054
[106]	2055	CASE ( 'w"e' )
	2056	dopr_index(i) = 69
	2057	dopr_unit(i) = 'm3/s3'
	2058	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2059
[197]	2060	CASE ( 'q*2' )
	2061	IF ( .NOT. humidity ) THEN
[215]	2062	message_string = 'data_output_pr = ' // &
	2063	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2064	'lemented for humidity = .FALSE.'
[226]	2065	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2066	ELSE
	2067	dopr_index(i) = 70
	2068	dopr_unit(i) = 'kg2/kg2'
	2069	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2070	ENDIF
[106]	2071
[1]	2072	CASE DEFAULT
[87]	2073
	2074	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2075
	2076	IF ( unit == 'illegal' ) THEN
[215]	2077	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2078	message_string = 'illegal value for data_output_pr or ' // &
	2079	'data_output_pr_user = "' // &
	2080	TRIM( data_output_pr(i) ) // '"'
[226]	2081	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2082	ELSE
	2083	message_string = 'illegal value for data_output_pr = "' // &
	2084	TRIM( data_output_pr(i) ) // '"'
[226]	2085	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2086	ENDIF
[1]	2087	ENDIF
	2088
	2089	END SELECT
	2090	!
	2091	!-- Check to which of the predefined coordinate systems the profile belongs
	2092	DO k = 1, crmax
	2093	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2094	/=0 ) &
	2095	THEN
	2096	dopr_crossindex(i) = k
	2097	EXIT
	2098	ENDIF
	2099	ENDDO
	2100	!
	2101	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2102	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2103	!-- control characters
	2104	dopr_label(i) = data_output_pr(i)
	2105	position = INDEX( dopr_label(i) , '"' )
	2106	DO WHILE ( position /= 0 )
	2107	dopr_label(i)(position:position) = ''''
	2108	position = INDEX( dopr_label(i) , '"' )
	2109	ENDDO
	2110
	2111	ENDDO
	2112
	2113	!
	2114	!-- y-value range of the coordinate system (PROFIL).
	2115	!-- x-value range determined in plot_1d.
[94]	2116	IF ( .NOT. ocean ) THEN
	2117	cross_uymin = 0.0
	2118	IF ( z_max_do1d == -1.0 ) THEN
	2119	cross_uymax = zu(nzt+1)
	2120	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2121	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2122	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
[226]	2123	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
[94]	2124	ELSE
	2125	cross_uymax = z_max_do1d
	2126	ENDIF
[1]	2127	ENDIF
	2128
	2129	!
	2130	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2131	!-- permissible
	2132	DO i = 1, crmax
	2133	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2134
	2135	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2136	j = 0
	2137
	2138	CASE DEFAULT
[215]	2139	message_string = 'unknown normalization method cross_normali' // &
	2140	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2141	'"'
[226]	2142	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
[1]	2143
	2144	END SELECT
	2145	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2146
	2147	CASE ( '', 'z_i' )
	2148	j = 0
	2149
	2150	CASE DEFAULT
[215]	2151	message_string = 'unknown normalization method cross_normali' // &
	2152	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2153	'"'
[226]	2154	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2155
	2156	END SELECT
	2157	ENDDO
	2158	!
	2159	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2160	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2161	THEN
[215]	2162	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2163	z_max_do1d_normalized, ' must be >= 0.0'
[226]	2164	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2165	ENDIF
	2166
	2167
	2168	!
	2169	!-- Append user-defined data output variables to the standard data output
	2170	IF ( data_output_user(1) /= ' ' ) THEN
	2171	i = 1
	2172	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2173	i = i + 1
	2174	ENDDO
	2175	j = 1
	2176	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2177	IF ( i > 100 ) THEN
[215]	2178	message_string = 'number of output quantitities given by data' // &
	2179	'_output and data_output_user exceeds the limit of 100'
[226]	2180	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2181	ENDIF
	2182	data_output(i) = data_output_user(j)
	2183	i = i + 1
	2184	j = j + 1
	2185	ENDDO
	2186	ENDIF
	2187
	2188	!
	2189	!-- Check and set steering parameters for 2d/3d data output and averaging
	2190	i = 1
	2191	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2192	!
	2193	!-- Check for data averaging
	2194	ilen = LEN_TRIM( data_output(i) )
	2195	j = 0 ! no data averaging
	2196	IF ( ilen > 3 ) THEN
	2197	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2198	j = 1 ! data averaging
	2199	data_output(i) = data_output(i)(1:ilen-3)
	2200	ENDIF
	2201	ENDIF
	2202	!
	2203	!-- Check for cross section or volume data
	2204	ilen = LEN_TRIM( data_output(i) )
	2205	k = 0 ! 3d data
	2206	var = data_output(i)(1:ilen)
	2207	IF ( ilen > 3 ) THEN
	2208	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2209	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2210	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2211	k = 1 ! 2d data
	2212	var = data_output(i)(1:ilen-3)
	2213	ENDIF
	2214	ENDIF
	2215	!
	2216	!-- Check for allowed value and set units
	2217	SELECT CASE ( TRIM( var ) )
	2218
	2219	CASE ( 'e' )
	2220	IF ( constant_diffusion ) THEN
[215]	2221	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2222	'res constant_diffusion = .FALSE.'
[226]	2223	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2224	ENDIF
	2225	unit = 'm2/s2'
	2226
	2227	CASE ( 'pc', 'pr' )
	2228	IF ( .NOT. particle_advection ) THEN
[215]	2229	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2230	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2231	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2232	ENDIF
	2233	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2234	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2235
	2236	CASE ( 'q', 'vpt' )
[75]	2237	IF ( .NOT. humidity ) THEN
[215]	2238	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2239	'res humidity = .TRUE.'
[226]	2240	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2241	ENDIF
	2242	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2243	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2244
	2245	CASE ( 'ql' )
	2246	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2247	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2248	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2249	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2250	ENDIF
	2251	unit = 'kg/kg'
	2252
	2253	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2254	IF ( .NOT. cloud_droplets ) THEN
[215]	2255	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2256	'res cloud_droplets = .TRUE.'
[226]	2257	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2258	ENDIF
	2259	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2260	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2261	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2262
	2263	CASE ( 'qv' )
	2264	IF ( .NOT. cloud_physics ) THEN
[215]	2265	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2266	'res cloud_physics = .TRUE.'
[226]	2267	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2268	ENDIF
	2269	unit = 'kg/kg'
	2270
[96]	2271	CASE ( 'rho' )
	2272	IF ( .NOT. ocean ) THEN
[215]	2273	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2274	'res ocean = .TRUE.'
[226]	2275	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2276	ENDIF
	2277	unit = 'kg/m3'
	2278
[1]	2279	CASE ( 's' )
	2280	IF ( .NOT. passive_scalar ) THEN
[215]	2281	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2282	'res passive_scalar = .TRUE.'
[226]	2283	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2284	ENDIF
	2285	unit = 'conc'
	2286
[96]	2287	CASE ( 'sa' )
	2288	IF ( .NOT. ocean ) THEN
[215]	2289	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2290	'res ocean = .TRUE.'
[226]	2291	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2292	ENDIF
	2293	unit = 'psu'
	2294
[72]	2295	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
[1]	2296	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2297	message_string = 'illegal value for data_output: "' // &
	2298	TRIM( var ) // '" & only 2d-horizontal ' // &
	2299	'cross sections are allowed for this value'
[226]	2300	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2301	ENDIF
	2302	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2303	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2304	'res cloud_physics = .TRUE.'
[226]	2305	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2306	ENDIF
[72]	2307	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2308	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2309	'res precipitation = .TRUE.'
[226]	2310	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2311	ENDIF
	2312	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2313	message_string = 'temporal averaging of precipitation ' // &
	2314	'amount "' // TRIM( var ) // '" is not possible'
[226]	2315	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2316	ENDIF
	2317	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2318	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2319	'res precipitation = .TRUE.'
[226]	2320	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2321	ENDIF
	2322
	2323
[1]	2324	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2325	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2326	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
[72]	2327	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2328	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2329	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[1]	2330
	2331	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2332	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2333	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2334	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2335	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2336	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2337	CONTINUE
	2338
	2339	CASE DEFAULT
	2340	CALL user_check_data_output( var, unit )
	2341
	2342	IF ( unit == 'illegal' ) THEN
[215]	2343	IF ( data_output_user(1) /= ' ' ) THEN
	2344	message_string = 'illegal value for data_output or ' // &
	2345	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2346	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2347	ELSE
	2348	message_string = 'illegal value for data_output =' // &
	2349	TRIM( data_output(i) ) // '"'
[226]	2350	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2351	ENDIF
	2352	ENDIF
	2353
	2354	END SELECT
	2355	!
	2356	!-- Set the internal steering parameters appropriately
	2357	IF ( k == 0 ) THEN
	2358	do3d_no(j) = do3d_no(j) + 1
	2359	do3d(j,do3d_no(j)) = data_output(i)
	2360	do3d_unit(j,do3d_no(j)) = unit
	2361	ELSE
	2362	do2d_no(j) = do2d_no(j) + 1
	2363	do2d(j,do2d_no(j)) = data_output(i)
	2364	do2d_unit(j,do2d_no(j)) = unit
	2365	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2366	data_output_xy(j) = .TRUE.
	2367	ENDIF
	2368	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2369	data_output_xz(j) = .TRUE.
	2370	ENDIF
	2371	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2372	data_output_yz(j) = .TRUE.
	2373	ENDIF
	2374	ENDIF
	2375
	2376	IF ( j == 1 ) THEN
	2377	!
	2378	!-- Check, if variable is already subject to averaging
	2379	found = .FALSE.
	2380	DO k = 1, doav_n
	2381	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2382	ENDDO
	2383
	2384	IF ( .NOT. found ) THEN
	2385	doav_n = doav_n + 1
	2386	doav(doav_n) = var
	2387	ENDIF
	2388	ENDIF
	2389
	2390	i = i + 1
	2391	ENDDO
	2392
	2393	!
	2394	!-- Store sectional planes in one shared array
	2395	section(:,1) = section_xy
	2396	section(:,2) = section_xz
	2397	section(:,3) = section_yz
	2398
	2399	!
	2400	!-- Upper plot limit (grid point value) for 1D profiles
	2401	IF ( z_max_do1d == -1.0 ) THEN
	2402	nz_do1d = nzt+1
	2403	ELSE
	2404	DO k = nzb+1, nzt+1
	2405	nz_do1d = k
	2406	IF ( zw(k) > z_max_do1d ) EXIT
	2407	ENDDO
	2408	ENDIF
	2409
	2410	!
	2411	!-- Upper plot limit for 2D vertical sections
	2412	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2413	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2414	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2415	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2416	' (zu(nzt))'
[226]	2417	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2418	ENDIF
	2419
	2420	!
	2421	!-- Upper plot limit for 3D arrays
	2422	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2423
	2424	!
	2425	!-- Determine and check accuracy for compressed 3D plot output
	2426	IF ( do3d_compress ) THEN
	2427	!
	2428	!-- Compression only permissible on T3E machines
	2429	IF ( host(1:3) /= 't3e' ) THEN
[215]	2430	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2431	TRIM( host ) // '"'
[226]	2432	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2433	ENDIF
	2434
	2435	i = 1
	2436	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2437
	2438	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2439	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2440	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2441	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2442	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2443	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2444	ENDIF
	2445
	2446	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2447	var = do3d_comp_prec(i)(1:ilen-1)
	2448
	2449	SELECT CASE ( var )
	2450
	2451	CASE ( 'u' )
	2452	j = 1
	2453	CASE ( 'v' )
	2454	j = 2
	2455	CASE ( 'w' )
	2456	j = 3
	2457	CASE ( 'p' )
	2458	j = 4
	2459	CASE ( 'pt' )
	2460	j = 5
	2461
	2462	CASE DEFAULT
[215]	2463	WRITE( message_string, * ) 'unknown variable "', &
	2464	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2465	i, ')'
[226]	2466	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2467
	2468	END SELECT
	2469
	2470	plot_3d_precision(j)%precision = prec
	2471	i = i + 1
	2472
	2473	ENDDO
	2474	ENDIF
	2475
	2476	!
	2477	!-- Check the data output format(s)
	2478	IF ( data_output_format(1) == ' ' ) THEN
	2479	!
	2480	!-- Default value
	2481	netcdf_output = .TRUE.
	2482	ELSE
	2483	i = 1
	2484	DO WHILE ( data_output_format(i) /= ' ' )
	2485
	2486	SELECT CASE ( data_output_format(i) )
	2487
	2488	CASE ( 'netcdf' )
	2489	netcdf_output = .TRUE.
	2490	CASE ( 'iso2d' )
	2491	iso2d_output = .TRUE.
	2492	CASE ( 'profil' )
	2493	profil_output = .TRUE.
	2494	CASE ( 'avs' )
	2495	avs_output = .TRUE.
	2496
	2497	CASE DEFAULT
[215]	2498	message_string = 'unknown value for data_output_format "' // &
	2499	TRIM( data_output_format(i) ) // '"'
[226]	2500	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2501
	2502	END SELECT
	2503
	2504	i = i + 1
	2505	IF ( i > 10 ) EXIT
	2506
	2507	ENDDO
	2508
	2509	ENDIF
	2510
	2511	!
	2512	!-- Check netcdf precison
	2513	ldum = .FALSE.
	2514	CALL define_netcdf_header( 'ch', ldum, 0 )
	2515
	2516	!
	2517	!-- Check, whether a constant diffusion coefficient shall be used
	2518	IF ( km_constant /= -1.0 ) THEN
	2519	IF ( km_constant < 0.0 ) THEN
[215]	2520	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2521	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2522	ELSE
	2523	IF ( prandtl_number < 0.0 ) THEN
[215]	2524	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2525	' < 0.0'
[226]	2526	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2527	ENDIF
	2528	constant_diffusion = .TRUE.
	2529
	2530	IF ( prandtl_layer ) THEN
[215]	2531	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2532	'value of km'
[226]	2533	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2534	ENDIF
	2535	ENDIF
	2536	ENDIF
	2537
	2538	!
	2539	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2540	!-- for the horizontal diffusivity used within the outflow damping layer,
	2541	!-- and check/set the width of the damping layer
	2542	IF ( bc_lr /= 'cyclic' ) THEN
	2543	IF ( km_damp_max == -1.0 ) THEN
	2544	km_damp_max = 0.5 * dx
	2545	ENDIF
	2546	IF ( outflow_damping_width == -1.0 ) THEN
	2547	outflow_damping_width = MIN( 20, nx/2 )
	2548	ENDIF
	2549	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2550	message_string = 'outflow_damping width out of range'
[226]	2551	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2552	ENDIF
	2553	ENDIF
	2554
	2555	IF ( bc_ns /= 'cyclic' ) THEN
	2556	IF ( km_damp_max == -1.0 ) THEN
	2557	km_damp_max = 0.5 * dy
	2558	ENDIF
	2559	IF ( outflow_damping_width == -1.0 ) THEN
	2560	outflow_damping_width = MIN( 20, ny/2 )
	2561	ENDIF
	2562	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2563	message_string = 'outflow_damping width out of range'
[226]	2564	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2565	ENDIF
	2566	ENDIF
	2567
	2568	!
	2569	!-- Check value range for rif
	2570	IF ( rif_min >= rif_max ) THEN
[215]	2571	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2572	'than rif_max = ', rif_max
[226]	2573	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2574	ENDIF
	2575
	2576	!
	2577	!-- Determine upper and lower hight level indices for random perturbations
[97]	2578	IF ( disturbance_level_b == -9999999.9 ) THEN
	2579	IF ( ocean ) THEN
	2580	disturbance_level_b = zu((nzt*2)/3)
	2581	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2582	ELSE
	2583	disturbance_level_b = zu(nzb+3)
	2584	disturbance_level_ind_b = nzb + 3
	2585	ENDIF
[1]	2586	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2587	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2588	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2589	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2590	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2591	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2592	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2593	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2594	ELSE
	2595	DO k = 3, nzt-2
	2596	IF ( disturbance_level_b <= zu(k) ) THEN
	2597	disturbance_level_ind_b = k
	2598	EXIT
	2599	ENDIF
	2600	ENDDO
	2601	ENDIF
	2602
[97]	2603	IF ( disturbance_level_t == -9999999.9 ) THEN
	2604	IF ( ocean ) THEN
	2605	disturbance_level_t = zu(nzt-3)
	2606	disturbance_level_ind_t = nzt - 3
	2607	ELSE
	2608	disturbance_level_t = zu(nzt/3)
	2609	disturbance_level_ind_t = nzt / 3
	2610	ENDIF
[1]	2611	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2612	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2613	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2614	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2615	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2616	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2617	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2618	disturbance_level_b
[226]	2619	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2620	ELSE
	2621	DO k = 3, nzt-2
	2622	IF ( disturbance_level_t <= zu(k) ) THEN
	2623	disturbance_level_ind_t = k
	2624	EXIT
	2625	ENDIF
	2626	ENDDO
	2627	ENDIF
	2628
	2629	!
	2630	!-- Check again whether the levels determined this way are ok.
	2631	!-- Error may occur at automatic determination and too few grid points in
	2632	!-- z-direction.
	2633	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2634	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2635	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2636	disturbance_level_b
[226]	2637	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2638	ENDIF
	2639
	2640	!
	2641	!-- Determine the horizontal index range for random perturbations.
	2642	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2643	!-- near the inflow and the perturbation area is further limited to ...(1)
	2644	!-- after the initial phase of the flow.
	2645	dist_nxl = 0; dist_nxr = nx
	2646	dist_nys = 0; dist_nyn = ny
	2647	IF ( bc_lr /= 'cyclic' ) THEN
	2648	IF ( inflow_disturbance_begin == -1 ) THEN
	2649	inflow_disturbance_begin = MIN( 10, nx/2 )
	2650	ENDIF
	2651	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2652	THEN
[215]	2653	message_string = 'inflow_disturbance_begin out of range'
[226]	2654	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2655	ENDIF
	2656	IF ( inflow_disturbance_end == -1 ) THEN
	2657	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2658	ENDIF
	2659	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2660	THEN
[215]	2661	message_string = 'inflow_disturbance_end out of range'
[226]	2662	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2663	ENDIF
	2664	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2665	IF ( inflow_disturbance_begin == -1 ) THEN
	2666	inflow_disturbance_begin = MIN( 10, ny/2 )
	2667	ENDIF
	2668	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2669	THEN
[215]	2670	message_string = 'inflow_disturbance_begin out of range'
[226]	2671	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	2672	ENDIF
	2673	IF ( inflow_disturbance_end == -1 ) THEN
	2674	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2675	ENDIF
	2676	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2677	THEN
[215]	2678	message_string = 'inflow_disturbance_end out of range'
[226]	2679	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	2680	ENDIF
	2681	ENDIF
	2682
[73]	2683	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2684	dist_nxr = nx - inflow_disturbance_begin
	2685	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2686	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2687	dist_nxl = inflow_disturbance_begin
	2688	dist_nxr(1) = inflow_disturbance_end
[73]	2689	ENDIF
	2690	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2691	dist_nyn = ny - inflow_disturbance_begin
	2692	dist_nys(1) = ny - inflow_disturbance_end
[73]	2693	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2694	dist_nys = inflow_disturbance_begin
	2695	dist_nyn(1) = inflow_disturbance_end
	2696	ENDIF
	2697
	2698	!
[151]	2699	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2700	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2701	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2702	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2703	'condition at the inflow boundary'
[226]	2704	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2705	ENDIF
	2706
	2707	!
	2708	!-- In case of turbulent inflow calculate the index of the recycling plane
	2709	IF ( turbulent_inflow ) THEN
	2710	IF ( recycling_width == 9999999.9 ) THEN
	2711	!
	2712	!-- Set the default value for the width of the recycling domain
	2713	recycling_width = 0.1 * nx * dx
	2714	ELSE
	2715	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2716	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2717	' ', recycling_width
[226]	2718	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	2719	ENDIF
	2720	ENDIF
	2721	!
	2722	!-- Calculate the index
	2723	recycling_plane = recycling_width / dx
	2724	ENDIF
	2725
	2726	!
[1]	2727	!-- Check random generator
	2728	IF ( random_generator /= 'system-specific' .AND. &
	2729	random_generator /= 'numerical-recipes' ) THEN
[215]	2730	message_string = 'unknown random generator: random_generator = "' // &
	2731	TRIM( random_generator ) // '"'
[226]	2732	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2733	ENDIF
	2734
	2735	!
	2736	!-- Determine damping level index for 1D model
	2737	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2738	IF ( damp_level_1d == -1.0 ) THEN
	2739	damp_level_1d = zu(nzt+1)
	2740	damp_level_ind_1d = nzt + 1
	2741	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2742	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2743	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	2744	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	2745	ELSE
	2746	DO k = 1, nzt+1
	2747	IF ( damp_level_1d <= zu(k) ) THEN
	2748	damp_level_ind_1d = k
	2749	EXIT
	2750	ENDIF
	2751	ENDDO
	2752	ENDIF
	2753	ENDIF
[215]	2754
[1]	2755	!
	2756	!-- Check some other 1d-model parameters
	2757	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2758	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2759	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2760	'" is unknown'
[226]	2761	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2762	ENDIF
	2763	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2764	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2765	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2766	'" is unknown'
[226]	2767	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2768	ENDIF
	2769
	2770	!
	2771	!-- Set time for the next user defined restart (time_restart is the
	2772	!-- internal parameter for steering restart events)
	2773	IF ( restart_time /= 9999999.9 ) THEN
	2774	IF ( restart_time > simulated_time ) time_restart = restart_time
	2775	ELSE
	2776	!
	2777	!-- In case of a restart run, set internal parameter to default (no restart)
	2778	!-- if the NAMELIST-parameter restart_time is omitted
	2779	time_restart = 9999999.9
	2780	ENDIF
	2781
	2782	!
	2783	!-- Set default value of the time needed to terminate a model run
	2784	IF ( termination_time_needed == -1.0 ) THEN
	2785	IF ( host(1:3) == 'ibm' ) THEN
	2786	termination_time_needed = 300.0
	2787	ELSE
	2788	termination_time_needed = 35.0
	2789	ENDIF
	2790	ENDIF
	2791
	2792	!
	2793	!-- Check the time needed to terminate a model run
	2794	IF ( host(1:3) == 't3e' ) THEN
	2795	!
	2796	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2797	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2798	IF ( termination_time_needed <= 30.0 ) THEN
[215]	2799	WRITE( message_string, * ) 'termination_time_needed = ', &
	2800	termination_time_needed, ' must be > 30.0 on host "', &
	2801	TRIM( host ), '"'
[226]	2802	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	2803	ENDIF
	2804	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2805	!
	2806	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2807	!-- because the job time consumed before executing palm (for compiling,
	2808	!-- copying of files, etc.) has to be regarded
	2809	IF ( termination_time_needed < 300.0 ) THEN
[215]	2810	WRITE( message_string, * ) 'termination_time_needed = ', &
	2811	termination_time_needed, ' should be >= 300.0 on host "', &
	2812	TRIM( host ), '"'
[226]	2813	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	2814	ENDIF
	2815	ENDIF
	2816
[217]	2817	!
	2818	!-- Check &userpar parameters
	2819	CALL user_check_parameters
[1]	2820
[217]	2821
[1]	2822	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |