Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 224

Last change on this file since 224 was 222, checked in by letzel, 16 years ago
Bugfixes for nonparallel execution
Property svn:keywords set to `Id`
File size: 114.7 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[217]	6	! +user_check_parameters
[213]	7	! Output of messages replaced by message handling routine.
[206]	8	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	9	! deleted __mpi2 directives
[222]	10	! Check that PALM is called with mrun -K parallel for coupling
[198]	11	!
	12	! Former revisions:
	13	! -----------------
	14	! $Id: check_parameters.f90 222 2009-01-12 16:04:16Z letzel $
	15	!
	16	! 197 2008-09-16 15:29:03Z raasch
[177]	17	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	18	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	19	!
	20	! Strict grid matching along z is not needed for mg-solver.
[153]	21	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	22	! Case of reading data for recycling included in initializing_actions,
[197]	23	! check of turbulent_inflow and calculation of recycling_plane.
	24	! q*2 profile added
[139]	25	!
	26	! 138 2007-11-28 10:03:58Z letzel
[138]	27	! Plant canopy added
[132]	28	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	29	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	30	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	31	!
	32	! 109 2007-08-28 15:26:47Z letzel
[102]	33	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	34	! conditions for temperature and fluxes) in case of coupled runs.
	35	! +profiles for wp and w"e
[104]	36	! Bugfix: Error message concerning output of particle concentration (pc)
	37	! modified
[108]	38	! More checks and more default values for coupled runs
	39	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	40	! cloud_physics = .T.)
	41	! Rayleigh damping for ocean fixed.
[109]	42	! Check and, if necessary, set default value for dt_coupling
[98]	43	!
	44	! 97 2007-06-21 08:23:15Z raasch
[97]	45	! Initial salinity profile is calculated, salinity boundary conditions are
	46	! checked,
[94]	47	! z_max_do1d is checked only in case of ocean = .f.,
[97]	48	! +initial temperature and geostrophic velocity profiles for the ocean version,
	49	! use_pt_reference renamed use_reference
[77]	50	!
[90]	51	! 89 2007-05-25 12:08:31Z raasch
	52	! Check for user-defined profiles
	53	!
[77]	54	! 75 2007-03-22 09:54:05Z raasch
[51]	55	! "by_user" allowed as initializing action, -data_output_ts,
[63]	56	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	57	! and pt_reference are checked, moisture renamed humidity,
[72]	58	! output of precipitation amount/rate and roughnes length + check
[73]	59	! possible negative humidities are avoided in initial profile,
[75]	60	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	61	! revision added to run_description_header
[1]	62	!
[39]	63	! 20 2007-02-26 00:12:32Z raasch
	64	! Temperature and humidity gradients at top are now calculated for nzt+1,
	65	! top_heatflux and respective boundary condition bc_pt_t is checked
	66	!
[3]	67	! RCS Log replace by Id keyword, revision history cleaned up
	68	!
[1]	69	! Revision 1.61 2006/08/04 14:20:25 raasch
	70	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	71	! use_upstream_for_tke, default value for dt_dopts,
	72	! generation of file header moved from routines palm and header to here
	73	!
	74	! Revision 1.1 1997/08/26 06:29:23 raasch
	75	! Initial revision
	76	!
	77	!
	78	! Description:
	79	! ------------
	80	! Check control parameters and deduce further quantities.
	81	!------------------------------------------------------------------------------!
	82
	83	USE arrays_3d
	84	USE constants
	85	USE control_parameters
	86	USE grid_variables
	87	USE indices
	88	USE model_1d
	89	USE netcdf_control
	90	USE particle_attributes
	91	USE pegrid
	92	USE profil_parameter
	93	USE statistics
	94	USE transpose_indices
	95
	96	IMPLICIT NONE
	97
	98	CHARACTER (LEN=1) :: sq
	99	CHARACTER (LEN=6) :: var
	100	CHARACTER (LEN=7) :: unit
	101	CHARACTER (LEN=8) :: date
	102	CHARACTER (LEN=10) :: time
[102]	103	CHARACTER (LEN=40) :: coupling_string
[1]	104	CHARACTER (LEN=100) :: action
	105
[108]	106	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	107	position, prec
[1]	108	LOGICAL :: found, ldum
[108]	109	REAL :: gradient, maxn, maxp, remote = 0.0
[1]	110
	111	!
	112	!-- Warning, if host is not set
	113	IF ( host(1:1) == ' ' ) THEN
[213]	114	message_string = '"host" is not set. Please check that environment ' // &
	115	'variable "localhost" & is set before running PALM'
	116	CALL handle_palm_message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	117	ENDIF
	118
	119	!
[102]	120	!-- Check the coupling mode
	121	IF ( coupling_mode /= 'uncoupled' .AND. &
	122	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	123	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	124	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
	125	CALL handle_palm_message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	126	ENDIF
	127
	128	!
[108]	129	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	130	IF ( coupling_mode /= 'uncoupled' ) THEN
[213]	131
[108]	132	IF ( dt_coupling == 9999999.9 ) THEN
[213]	133	message_string = 'dt_coupling is not set but required for coup' // &
	134	'ling mode "' // TRIM( coupling_mode ) // '"'
	135	CALL handle_palm_message( 'check_parameters', 'PA0003', 1, 2, 0, 6, &
	136	0 )
[108]	137	ENDIF
[213]	138
[206]	139	#if defined( __parallel )
	140	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	141	ierr )
	142	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	143	status, ierr )
[108]	144	IF ( dt_coupling /= remote ) THEN
[213]	145	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	146	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	147	'dt_coupling_remote = ', remote
	148	CALL handle_palm_message( 'check_parameters', 'PA0004', 1, 2, 0, 6, &
	149	0 )
[108]	150	ENDIF
[109]	151	IF ( dt_coupling <= 0.0 ) THEN
[206]	152	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	153	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	154	status, ierr )
[109]	155	dt_coupling = MAX( dt_max, remote )
[213]	156	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	157	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	158	'MAX(dt_max(A,O)) = ', dt_coupling
	159	CALL handle_palm_message( 'check_parameters', 'PA0005', 0, 1, 0, 6, &
	160	0 )
[109]	161	ENDIF
[213]	162
[206]	163	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	164	ierr )
	165	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	166	status, ierr )
[108]	167	IF ( restart_time /= remote ) THEN
[213]	168	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	169	'": restart_time = ', restart_time, '& is not equal to ', &
	170	'restart_time_remote = ', remote
	171	CALL handle_palm_message( 'check_parameters', 'PA0006', 1, 2, 0, 6, &
	172	0 )
[108]	173	ENDIF
[213]	174
[206]	175	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	176	ierr )
	177	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	178	status, ierr )
[108]	179	IF ( dt_restart /= remote ) THEN
[213]	180	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	181	'": dt_restart = ', dt_restart, '& is not equal to ', &
	182	'dt_restart_remote = ', remote
	183	CALL handle_palm_message( 'check_parameters', 'PA0007', 1, 2, 0, 6, &
	184	0 )
[108]	185	ENDIF
[213]	186
[206]	187	CALL MPI_SEND( end_time, 1, MPI_REAL, target_id, 14, comm_inter, ierr )
	188	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	189	status, ierr )
[108]	190	IF ( end_time /= remote ) THEN
[213]	191	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	192	'": end_time = ', end_time, '& is not equal to ', &
	193	'end_time_remote = ', remote
	194	CALL handle_palm_message( 'check_parameters', 'PA0008', 1, 2, 0, 6, &
	195	0 )
[108]	196	ENDIF
[213]	197
[206]	198	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	199	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	200	status, ierr )
[108]	201	IF ( dx /= remote ) THEN
[213]	202	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	203	'": dx = ', dx, '& is not equal to dx_remote = ', remote
	204	CALL handle_palm_message( 'check_parameters', 'PA0009', 1, 2, 0, 6, &
	205	0 )
[108]	206	ENDIF
[213]	207
[206]	208	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	209	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	210	status, ierr )
[108]	211	IF ( dy /= remote ) THEN
[213]	212	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	213	'": dy = ', dy, '& is not equal to dy_remote = ', remote
	214	CALL handle_palm_message( 'check_parameters', 'PA0010', 1, 2, 0, 6, &
	215	0 )
[108]	216	ENDIF
[213]	217
[206]	218	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
	219	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
	220	status, ierr )
[108]	221	IF ( nx /= iremote ) THEN
[213]	222	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	223	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
	224	CALL handle_palm_message( 'check_parameters', 'PA0011', 1, 2, 0, 6, &
	225	0 )
[108]	226	ENDIF
[213]	227
[206]	228	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
	229	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
	230	status, ierr )
[108]	231	IF ( ny /= iremote ) THEN
[213]	232	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	233	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
	234	CALL handle_palm_message( 'check_parameters', 'PA0012', 1, 2, 0, 6, &
	235	0 )
[108]	236	ENDIF
[222]	237	#else
	238	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	239	' ''mrun -K parallel'''
	240	CALL handle_palm_message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	241	#endif
	242	ENDIF
	243
[206]	244	#if defined( __parallel )
[108]	245	!
	246	!-- Exchange via intercommunicator
	247	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
[206]	248	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	249	ierr )
[108]	250	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
[206]	251	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	252	comm_inter, status, ierr )
[108]	253	ENDIF
	254	#endif
	255
	256
	257	!
[1]	258	!-- Generate the file header which is used as a header for most of PALM's
	259	!-- output files
	260	CALL DATE_AND_TIME( date, time )
	261	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	262	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	263	IF ( coupling_mode == 'uncoupled' ) THEN
	264	coupling_string = ''
	265	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	266	coupling_string = ' coupled (atmosphere)'
	267	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	268	coupling_string = ' coupled (ocean)'
	269	ENDIF
[1]	270
[102]	271	WRITE ( run_description_header, &
	272	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	273	TRIM( version ), TRIM( revision ), 'run: ', &
	274	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	275	'host: ', TRIM( host ), run_date, run_time
[1]	276
	277	!
[63]	278	!-- Check the general loop optimization method
	279	IF ( loop_optimization == 'default' ) THEN
	280	IF ( host(1:3) == 'nec' ) THEN
	281	loop_optimization = 'vector'
	282	ELSE
	283	loop_optimization = 'cache'
	284	ENDIF
	285	ENDIF
	286	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	287	.AND. loop_optimization /= 'vector' ) THEN
[213]	288	message_string = 'illegal value given for loop_optimization: "' // &
	289	TRIM( loop_optimization ) // '"'
	290	CALL handle_palm_message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
[63]	291	ENDIF
	292
	293	!
[1]	294	!-- Check topography setting (check for illegal parameter combinations)
	295	IF ( topography /= 'flat' ) THEN
	296	action = ' '
	297	IF ( scalar_advec /= 'pw-scheme' ) THEN
	298	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	299	ENDIF
	300	IF ( momentum_advec /= 'pw-scheme' ) THEN
	301	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	302	ENDIF
[51]	303	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	304	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	305	ENDIF
[114]	306	IF ( psolver == 'sor' ) THEN
[1]	307	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	308	ENDIF
	309	IF ( sloping_surface ) THEN
	310	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	311	ENDIF
	312	IF ( galilei_transformation ) THEN
	313	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	314	ENDIF
	315	IF ( cloud_physics ) THEN
	316	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	317	ENDIF
	318	IF ( cloud_droplets ) THEN
	319	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	320	ENDIF
[75]	321	IF ( humidity ) THEN
	322	WRITE( action, '(A)' ) 'humidity = .TRUE.'
[1]	323	ENDIF
	324	IF ( .NOT. prandtl_layer ) THEN
	325	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	326	ENDIF
	327	IF ( action /= ' ' ) THEN
[213]	328	message_string = 'a non-flat topography does not allow ' // &
	329	TRIM( action )
	330	CALL handle_palm_message( 'check_parameters', 'PA0014', 1, 2, 0, 6, &
	331	0 )
[1]	332	ENDIF
	333	ENDIF
[94]	334
[1]	335	!
[94]	336	!-- Check ocean setting
	337	IF ( ocean ) THEN
	338	action = ' '
	339	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	340	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	341	ENDIF
[97]	342	IF ( momentum_advec == 'ups-scheme' ) THEN
	343	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	344	ENDIF
[94]	345	IF ( action /= ' ' ) THEN
[213]	346	message_string = 'ocean = .T. does not allow ' // TRIM( action )
	347	CALL handle_palm_message( 'check_parameters', 'PA0015', 1, 2, 0, 6, &
	348	0 )
[94]	349	ENDIF
	350	ENDIF
	351
	352	!
[1]	353	!-- Check whether there are any illegal values
	354	!-- Pressure solver:
	355	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	356	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	357	message_string = 'unknown solver for perturbation pressure: psolver' // &
	358	' = "' // TRIM( psolver ) // '"'
	359	CALL handle_palm_message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	360	ENDIF
	361
	362	#if defined( __parallel )
	363	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	364	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	365	'for a 1d domain-decomposition along x & please do' // &
	366	' not set npey/=1 in the parameter file'
	367	CALL handle_palm_message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	368	ENDIF
[181]	369	IF ( psolver == 'poisfft_hybrid' .AND. &
	370	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	371	psolver == 'multigrid' .AND. &
	372	( nxra > nxr .OR. nyna > nyn ) ) THEN
[213]	373	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
	374	'work for subdomains with unequal size & please ' // &
	375	'set grid_matching = ''strict'' in the parameter file'
	376	CALL handle_palm_message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
[1]	377	ENDIF
	378	#else
	379	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	380	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	381	' for a parallel environment'
	382	CALL handle_palm_message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	383	ENDIF
	384	#endif
	385
	386	IF ( psolver == 'multigrid' ) THEN
	387	IF ( cycle_mg == 'w' ) THEN
	388	gamma_mg = 2
	389	ELSEIF ( cycle_mg == 'v' ) THEN
	390	gamma_mg = 1
	391	ELSE
[213]	392	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	393	TRIM( cycle_mg ) // '"'
	394	CALL handle_palm_message( 'check_parameters', 'PA0020', 1, 2, 0, 6, &
	395	0 )
[1]	396	ENDIF
	397	ENDIF
	398
	399	IF ( fft_method /= 'singleton-algorithm' .AND. &
	400	fft_method /= 'temperton-algorithm' .AND. &
	401	fft_method /= 'system-specific' ) THEN
[213]	402	message_string = 'unknown fft-algorithm: fft_method = "' // &
	403	TRIM( fft_method ) // '"'
	404	CALL handle_palm_message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	405	ENDIF
	406
	407	!
	408	!-- Advection schemes:
	409	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	410	THEN
[214]	411	message_string = 'unknown advection scheme: momentum_advec = "' // &
	412	TRIM( momentum_advec ) // '"'
	413	CALL handle_palm_message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	414	ENDIF
	415	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	416	.AND. timestep_scheme /= 'euler' ) THEN
[214]	417	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
	418	'" is not allowed with timestep_scheme = "' // &
	419	TRIM( timestep_scheme ) // '"'
	420	CALL handle_palm_message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	421	ENDIF
	422
	423	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	424	scalar_advec /= 'ups-scheme' ) THEN
[214]	425	message_string = 'unknown advection scheme: scalar_advec = "' // &
	426	TRIM( scalar_advec ) // '"'
	427	CALL handle_palm_message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	428	ENDIF
	429
	430	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	431	use_upstream_for_tke = .TRUE.
[214]	432	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	433	'use_sgs_for_particles = .TRUE.'
	434	CALL handle_palm_message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	435	ENDIF
	436
	437	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
[214]	438	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
	439	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
	440	CALL handle_palm_message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
[1]	441	ENDIF
	442
	443	!
	444	!-- Timestep schemes:
	445	SELECT CASE ( TRIM( timestep_scheme ) )
	446
	447	CASE ( 'euler' )
	448	intermediate_timestep_count_max = 1
	449	asselin_filter_factor = 0.0
	450
	451	CASE ( 'leapfrog', 'leapfrog+euler' )
	452	intermediate_timestep_count_max = 1
	453
	454	CASE ( 'runge-kutta-2' )
	455	intermediate_timestep_count_max = 2
	456	asselin_filter_factor = 0.0
	457
	458	CASE ( 'runge-kutta-3' )
	459	intermediate_timestep_count_max = 3
	460	asselin_filter_factor = 0.0
	461
	462	CASE DEFAULT
[214]	463	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	464	TRIM( timestep_scheme ) // '"'
	465	CALL handle_palm_message( 'check_parameters', 'PA0027', 1, 2, 0, 6, &
	466	0 )
[1]	467
	468	END SELECT
	469
[63]	470	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	471	THEN
[214]	472	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
	473	'" & does not work with timestep_scheme "' // &
	474	TRIM( timestep_scheme ) // '"'
	475	CALL handle_palm_message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
[1]	476	ENDIF
	477
	478	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	479	THEN
[214]	480	message_string = 'momentum advection scheme "' // &
	481	TRIM( momentum_advec ) // '" & does not work with ' // &
	482	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
	483	CALL handle_palm_message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	484	ENDIF
	485
[147]	486	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	487	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
[1]	488	!
[214]	489	!-- No restart run: several initialising actions are possible
[1]	490	action = initializing_actions
	491	DO WHILE ( TRIM( action ) /= '' )
	492	position = INDEX( action, ' ' )
	493	SELECT CASE ( action(1:position-1) )
	494
	495	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	496	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	497	action = action(position+1:)
	498
	499	CASE DEFAULT
[214]	500	message_string = 'initializing_action = "' // &
	501	TRIM( action ) // '" unkown or not allowed'
	502	CALL handle_palm_message( 'check_parameters', 'PA0030', 1, 2, &
	503	0, 6, 0 )
[1]	504
	505	END SELECT
	506	ENDDO
	507	ENDIF
[214]	508
[1]	509	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	510	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	511	message_string = 'initializing_actions = "set_constant_profiles"' // &
	512	' and "set_1d-model_profiles" are not allowed ' // &
	513	'simultaneously'
	514	CALL handle_palm_message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	515	ENDIF
[214]	516
[46]	517	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	518	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	519	message_string = 'initializing_actions = "set_constant_profiles"' // &
	520	' and "by_user" are not allowed simultaneously'
	521	CALL handle_palm_message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	522	ENDIF
[214]	523
[46]	524	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	525	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	526	message_string = 'initializing_actions = "by_user" and ' // &
	527	'"set_1d-model_profiles" are not allowed simultaneously'
	528	CALL handle_palm_message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	529	ENDIF
[1]	530
[75]	531	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	532	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	533	'not allowed with humidity = ', humidity
	534	CALL handle_palm_message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	535	ENDIF
	536
[72]	537	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	538	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	539	'not allowed with cloud_physics = ', cloud_physics
	540	CALL handle_palm_message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	541	ENDIF
	542
[75]	543	IF ( humidity .AND. sloping_surface ) THEN
[214]	544	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	545	'are not allowed simultaneously'
	546	CALL handle_palm_message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	547	ENDIF
	548
[75]	549	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	550	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
	551	CALL handle_palm_message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
[1]	552	ENDIF
	553
[75]	554	IF ( passive_scalar .AND. humidity ) THEN
[214]	555	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	556	'is not allowed simultaneously'
	557	CALL handle_palm_message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	558	ENDIF
	559
	560	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
[214]	561	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
	562	' = .TRUE.'
	563	CALL handle_palm_message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
[1]	564	ENDIF
	565
	566	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
[214]	567	message_string = 'illegal value "' // TRIM( grid_matching ) // &
	568	'" found for parameter grid_matching'
	569	CALL handle_palm_message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
[1]	570	ENDIF
	571
[138]	572	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	573	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	574	'coefficient & given value is drag_coefficient = 0.0'
	575	CALL handle_palm_message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	576	ENDIF
	577
[1]	578	!
	579	!-- In case of no model continuation run, check initialising parameters and
	580	!-- deduce further quantities
	581	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	582
	583	!
	584	!-- Initial profiles for 1D and 3D model, respectively
	585	u_init = ug_surface
	586	v_init = vg_surface
	587	pt_init = pt_surface
[94]	588	IF ( humidity ) q_init = q_surface
	589	IF ( ocean ) sa_init = sa_surface
	590	IF ( passive_scalar ) q_init = s_surface
[138]	591	IF ( plant_canopy ) lad = 0.0
[1]	592
	593	!
	594	!--
	595	!-- If required, compute initial profile of the geostrophic wind
	596	!-- (component ug)
	597	i = 1
	598	gradient = 0.0
[97]	599
	600	IF ( .NOT. ocean ) THEN
	601
	602	ug_vertical_gradient_level_ind(1) = 0
	603	ug(0) = ug_surface
	604	DO k = 1, nzt+1
[177]	605	IF ( i < 11 ) THEN
	606	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	607	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	608	gradient = ug_vertical_gradient(i) / 100.0
	609	ug_vertical_gradient_level_ind(i) = k - 1
	610	i = i + 1
[1]	611	ENDIF
[177]	612	ENDIF
[97]	613	IF ( gradient /= 0.0 ) THEN
	614	IF ( k /= 1 ) THEN
	615	ug(k) = ug(k-1) + dzu(k) * gradient
	616	ELSE
	617	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	618	ENDIF
[1]	619	ELSE
[97]	620	ug(k) = ug(k-1)
[1]	621	ENDIF
[97]	622	ENDDO
[1]	623
[97]	624	ELSE
	625
	626	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	627	ug(nzt+1) = ug_surface
[97]	628	DO k = nzt, 0, -1
[177]	629	IF ( i < 11 ) THEN
	630	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	631	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	632	gradient = ug_vertical_gradient(i) / 100.0
	633	ug_vertical_gradient_level_ind(i) = k + 1
	634	i = i + 1
[97]	635	ENDIF
	636	ENDIF
	637	IF ( gradient /= 0.0 ) THEN
	638	IF ( k /= nzt ) THEN
	639	ug(k) = ug(k+1) - dzu(k+1) * gradient
	640	ELSE
	641	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	642	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	643	ENDIF
	644	ELSE
	645	ug(k) = ug(k+1)
	646	ENDIF
	647	ENDDO
	648
	649	ENDIF
	650
[1]	651	u_init = ug
	652
	653	!
	654	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	655	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	656	ug_vertical_gradient_level(1) = 0.0
	657	ENDIF
	658
	659	!
	660	!--
	661	!-- If required, compute initial profile of the geostrophic wind
	662	!-- (component vg)
	663	i = 1
	664	gradient = 0.0
[97]	665
	666	IF ( .NOT. ocean ) THEN
	667
	668	vg_vertical_gradient_level_ind(1) = 0
	669	vg(0) = vg_surface
	670	DO k = 1, nzt+1
[177]	671	IF ( i < 11 ) THEN
	672	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	673	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	674	gradient = vg_vertical_gradient(i) / 100.0
	675	vg_vertical_gradient_level_ind(i) = k - 1
	676	i = i + 1
[1]	677	ENDIF
	678	ENDIF
[97]	679	IF ( gradient /= 0.0 ) THEN
	680	IF ( k /= 1 ) THEN
	681	vg(k) = vg(k-1) + dzu(k) * gradient
	682	ELSE
	683	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	684	ENDIF
[1]	685	ELSE
[97]	686	vg(k) = vg(k-1)
[1]	687	ENDIF
[97]	688	ENDDO
[1]	689
[97]	690	ELSE
	691
[121]	692	vg_vertical_gradient_level_ind(1) = nzt+1
	693	vg(nzt+1) = vg_surface
[97]	694	DO k = nzt, 0, -1
[177]	695	IF ( i < 11 ) THEN
	696	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	697	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	698	gradient = vg_vertical_gradient(i) / 100.0
	699	vg_vertical_gradient_level_ind(i) = k + 1
	700	i = i + 1
[97]	701	ENDIF
	702	ENDIF
	703	IF ( gradient /= 0.0 ) THEN
	704	IF ( k /= nzt ) THEN
	705	vg(k) = vg(k+1) - dzu(k+1) * gradient
	706	ELSE
	707	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	708	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	709	ENDIF
	710	ELSE
	711	vg(k) = vg(k+1)
	712	ENDIF
	713	ENDDO
	714
	715	ENDIF
	716
[1]	717	v_init = vg
	718
	719	!
	720	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	721	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	722	vg_vertical_gradient_level(1) = 0.0
	723	ENDIF
	724
	725	!
[94]	726	!-- Compute initial temperature profile using the given temperature gradients
[1]	727	i = 1
	728	gradient = 0.0
[94]	729
	730	IF ( .NOT. ocean ) THEN
	731
	732	pt_vertical_gradient_level_ind(1) = 0
	733	DO k = 1, nzt+1
[177]	734	IF ( i < 11 ) THEN
	735	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	736	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	737	gradient = pt_vertical_gradient(i) / 100.0
	738	pt_vertical_gradient_level_ind(i) = k - 1
	739	i = i + 1
[1]	740	ENDIF
	741	ENDIF
[94]	742	IF ( gradient /= 0.0 ) THEN
	743	IF ( k /= 1 ) THEN
	744	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	745	ELSE
	746	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	747	ENDIF
[1]	748	ELSE
[94]	749	pt_init(k) = pt_init(k-1)
[1]	750	ENDIF
[94]	751	ENDDO
[1]	752
[94]	753	ELSE
	754
	755	pt_vertical_gradient_level_ind(1) = nzt+1
	756	DO k = nzt, 0, -1
[177]	757	IF ( i < 11 ) THEN
	758	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	759	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	760	gradient = pt_vertical_gradient(i) / 100.0
	761	pt_vertical_gradient_level_ind(i) = k + 1
	762	i = i + 1
[94]	763	ENDIF
	764	ENDIF
	765	IF ( gradient /= 0.0 ) THEN
	766	IF ( k /= nzt ) THEN
	767	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	768	ELSE
	769	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	770	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	771	ENDIF
	772	ELSE
	773	pt_init(k) = pt_init(k+1)
	774	ENDIF
	775	ENDDO
	776
	777	ENDIF
	778
[1]	779	!
	780	!-- In case of no given temperature gradients, choose gradient of neutral
	781	!-- stratification
[94]	782	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	783	pt_vertical_gradient_level(1) = 0.0
	784	ENDIF
	785
	786	!
[94]	787	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	788	!-- boundary condition
[19]	789	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	790
	791	!
	792	!-- If required, compute initial humidity or scalar profile using the given
	793	!-- humidity/scalar gradient. In case of scalar transport, initially store
	794	!-- values of the scalar parameters on humidity parameters
	795	IF ( passive_scalar ) THEN
	796	bc_q_b = bc_s_b
	797	bc_q_t = bc_s_t
	798	q_surface = s_surface
	799	q_surface_initial_change = s_surface_initial_change
	800	q_vertical_gradient = s_vertical_gradient
	801	q_vertical_gradient_level = s_vertical_gradient_level
	802	surface_waterflux = surface_scalarflux
	803	ENDIF
	804
[75]	805	IF ( humidity .OR. passive_scalar ) THEN
[1]	806
	807	i = 1
	808	gradient = 0.0
	809	q_vertical_gradient_level_ind(1) = 0
	810	DO k = 1, nzt+1
[177]	811	IF ( i < 11 ) THEN
	812	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	813	q_vertical_gradient_level(i) >= 0.0 ) THEN
	814	gradient = q_vertical_gradient(i) / 100.0
	815	q_vertical_gradient_level_ind(i) = k - 1
	816	i = i + 1
[1]	817	ENDIF
	818	ENDIF
	819	IF ( gradient /= 0.0 ) THEN
	820	IF ( k /= 1 ) THEN
	821	q_init(k) = q_init(k-1) + dzu(k) * gradient
	822	ELSE
	823	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	824	ENDIF
	825	ELSE
	826	q_init(k) = q_init(k-1)
	827	ENDIF
[72]	828	!
	829	!-- Avoid negative humidities
	830	IF ( q_init(k) < 0.0 ) THEN
	831	q_init(k) = 0.0
	832	ENDIF
[1]	833	ENDDO
	834
	835	!
	836	!-- In case of no given humidity gradients, choose zero gradient
	837	!-- conditions
	838	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	839	q_vertical_gradient_level(1) = 0.0
	840	ENDIF
	841
	842	!
	843	!-- Store humidity gradient at the top boundary for possile Neumann
	844	!-- boundary condition
[19]	845	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	846
	847	ENDIF
	848
[94]	849	!
	850	!-- If required, compute initial salinity profile using the given salinity
	851	!-- gradients
	852	IF ( ocean ) THEN
	853
	854	i = 1
	855	gradient = 0.0
	856
	857	sa_vertical_gradient_level_ind(1) = nzt+1
	858	DO k = nzt, 0, -1
[177]	859	IF ( i < 11 ) THEN
	860	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	861	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	862	gradient = sa_vertical_gradient(i) / 100.0
	863	sa_vertical_gradient_level_ind(i) = k + 1
	864	i = i + 1
[94]	865	ENDIF
	866	ENDIF
	867	IF ( gradient /= 0.0 ) THEN
	868	IF ( k /= nzt ) THEN
	869	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	870	ELSE
	871	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	872	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	873	ENDIF
	874	ELSE
	875	sa_init(k) = sa_init(k+1)
	876	ENDIF
	877	ENDDO
	878
	879	ENDIF
	880
[138]	881	!
	882	!-- If required compute the profile of leaf area density used in the plant canopy model
	883	IF ( plant_canopy ) THEN
	884
	885	i = 1
	886	gradient = 0.0
[1]	887
[138]	888	IF ( .NOT. ocean ) THEN
[153]	889
	890	lad(0) = lad_surface
[138]	891
	892	lad_vertical_gradient_level_ind(1) = 0
	893	DO k = 1, pch_index
[177]	894	IF ( i < 11 ) THEN
	895	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	896	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	897	gradient = lad_vertical_gradient(i)
	898	lad_vertical_gradient_level_ind(i) = k - 1
	899	i = i + 1
[138]	900	ENDIF
	901	ENDIF
	902	IF ( gradient /= 0.0 ) THEN
	903	IF ( k /= 1 ) THEN
	904	lad(k) = lad(k-1) + dzu(k) * gradient
	905	ELSE
	906	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	907	ENDIF
	908	ELSE
	909	lad(k) = lad(k-1)
	910	ENDIF
	911	ENDDO
	912
	913	ENDIF
	914
[1]	915	!
[138]	916	!-- In case of no given leaf area density gradients, choose a vanishing gradient
	917	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	918	lad_vertical_gradient_level(1) = 0.0
	919	ENDIF
	920
	921	ENDIF
	922
	923	ENDIF
	924
	925	!
[1]	926	!-- Compute Coriolis parameter
	927	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	928	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	929
	930	!
[97]	931	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	932	!-- set the reference temperature equal to the surface temperature.
	933	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	934
	935	!
[97]	936	!-- Reference value has to be used in buoyancy terms
	937	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	938
	939	!
	940	!-- Sign of buoyancy/stability terms
	941	IF ( ocean ) atmos_ocean_sign = -1.0
	942
	943	!
[108]	944	!-- Ocean version must use flux boundary conditions at the top
	945	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	946	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
	947	CALL handle_palm_message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	948	ENDIF
[97]	949
	950	!
[1]	951	!-- In case of a given slope, compute the relevant quantities
	952	IF ( alpha_surface /= 0.0 ) THEN
	953	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	954	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	955	' ) must be < 90.0'
	956	CALL handle_palm_message( 'check_parameters', 'PA0043', 1, 2, 0, 6, &
	957	0 )
[1]	958	ENDIF
	959	sloping_surface = .TRUE.
	960	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	961	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	962	ENDIF
	963
	964	!
	965	!-- Check time step and cfl_factor
	966	IF ( dt /= -1.0 ) THEN
	967	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	968	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
	969	CALL handle_palm_message( 'check_parameters', 'PA0044', 1, 2, 0, 6, &
	970	0 )
[1]	971	ENDIF
	972	dt_3d = dt
	973	dt_fixed = .TRUE.
	974	ENDIF
	975
	976	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	977	IF ( cfl_factor == -1.0 ) THEN
	978	IF ( momentum_advec == 'ups-scheme' .OR. &
	979	scalar_advec == 'ups-scheme' ) THEN
	980	cfl_factor = 0.8
	981	ELSE
	982	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	983	cfl_factor = 0.8
	984	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	985	cfl_factor = 0.9
	986	ELSE
	987	cfl_factor = 0.1
	988	ENDIF
	989	ENDIF
	990	ELSE
[215]	991	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	992	' out of range & 0.0 < cfl_factor <= 1.0 is required'
	993	CALL handle_palm_message( 'check_parameters', 'PA0045', 1, 2, 0, 6, &
	994	0 )
[1]	995	ENDIF
	996	ENDIF
	997
	998	!
	999	!-- Store simulated time at begin
	1000	simulated_time_at_begin = simulated_time
	1001
	1002	!
	1003	!-- Set wind speed in the Galilei-transformed system
	1004	IF ( galilei_transformation ) THEN
	1005	IF ( use_ug_for_galilei_tr .AND. &
	1006	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1007	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1008	u_gtrans = ug_surface
	1009	v_gtrans = vg_surface
	1010	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1011	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1012	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1013	' with galilei transformation'
	1014	CALL handle_palm_message( 'check_parameters', 'PA0046', 1, 2, 0, 6, &
	1015	0 )
[1]	1016	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1017	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1018	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1019	' with galilei transformation'
	1020	CALL handle_palm_message( 'check_parameters', 'PA0047', 1, 2, 0, 6, &
	1021	0 )
[1]	1022	ELSE
[215]	1023	message_string = 'variable translation speed used for galilei-' // &
	1024	'transformation, which may cause & instabilities in stably ' // &
	1025	'stratified regions'
	1026	CALL handle_palm_message( 'check_parameters', 'PA0048', 0, 1, 0, 6, &
	1027	0 )
[1]	1028	ENDIF
	1029	ENDIF
	1030
	1031	!
	1032	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1033	!-- fluxes have to be used in the diffusion-terms
	1034	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1035
	1036	!
	1037	!-- Check boundary conditions and set internal variables:
	1038	!-- Lateral boundary conditions
[73]	1039	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1040	bc_lr /= 'radiation/dirichlet' ) THEN
[215]	1041	message_string = 'unknown boundary condition: bc_lr = "' // &
	1042	TRIM( bc_lr ) // '"'
	1043	CALL handle_palm_message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1044	ENDIF
[73]	1045	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1046	bc_ns /= 'radiation/dirichlet' ) THEN
[215]	1047	message_string = 'unknown boundary condition: bc_ns = "' // &
	1048	TRIM( bc_ns ) // '"'
	1049	CALL handle_palm_message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1050	ENDIF
	1051
	1052	!
	1053	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1054	!-- Willimas advection scheme. Several schemes and tools do not work with
	1055	!-- non-cyclic boundary conditions.
	1056	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1057	IF ( psolver /= 'multigrid' ) THEN
[215]	1058	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1059	'psolver = "' // TRIM( psolver ) // '"'
	1060	CALL handle_palm_message( 'check_parameters', 'PA0051', 1, 2, 0, 6, &
	1061	0 )
[1]	1062	ENDIF
	1063	IF ( momentum_advec /= 'pw-scheme' ) THEN
[215]	1064	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1065	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
	1066	CALL handle_palm_message( 'check_parameters', 'PA0052', 1, 2, 0, 6, &
	1067	0 )
[1]	1068	ENDIF
	1069	IF ( scalar_advec /= 'pw-scheme' ) THEN
[215]	1070	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1071	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
	1072	CALL handle_palm_message( 'check_parameters', 'PA0053', 1, 2, 0, 6, &
	1073	0 )
[1]	1074	ENDIF
	1075	IF ( galilei_transformation ) THEN
[215]	1076	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1077	'galilei_transformation = .T.'
	1078	CALL handle_palm_message( 'check_parameters', 'PA0054', 1, 2, 0, 6, &
	1079	0 )
[1]	1080	ENDIF
	1081	ENDIF
	1082
	1083	!
	1084	!-- Bottom boundary condition for the turbulent Kinetic energy
	1085	IF ( bc_e_b == 'neumann' ) THEN
	1086	ibc_e_b = 1
	1087	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1088	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
	1089	CALL handle_palm_message( 'check_parameters', 'PA0055', 0, 1, 0, 6, &
	1090	0 )
[1]	1091	ENDIF
	1092	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1093	ibc_e_b = 2
	1094	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
[215]	1095	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
	1096	TRIM( bc_e_b ) // '"'
	1097	CALL handle_palm_message( 'check_parameters', 'PA0056', 0, 1, 0, 6, &
	1098	0 )
[1]	1099	ENDIF
	1100	IF ( .NOT. prandtl_layer ) THEN
	1101	bc_e_b = 'neumann'
	1102	ibc_e_b = 1
[215]	1103	message_string = 'boundary condition bc_e_b changed to "' // &
	1104	TRIM( bc_e_b ) // '"'
	1105	CALL handle_palm_message( 'check_parameters', 'PA0057', 0, 1, 0, 6, &
	1106	0 )
[1]	1107	ENDIF
	1108	ELSE
[215]	1109	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1110	TRIM( bc_e_b ) // '"'
	1111	CALL handle_palm_message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1112	ENDIF
	1113
	1114	!
	1115	!-- Boundary conditions for perturbation pressure
	1116	IF ( bc_p_b == 'dirichlet' ) THEN
	1117	ibc_p_b = 0
	1118	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1119	ibc_p_b = 1
	1120	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1121	ibc_p_b = 2
	1122	ELSE
[215]	1123	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1124	TRIM( bc_p_b ) // '"'
	1125	CALL handle_palm_message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1126	ENDIF
	1127	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1128	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1129	'" not allowed with prandtl_layer = .FALSE.'
	1130	CALL handle_palm_message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1131	ENDIF
	1132	IF ( bc_p_t == 'dirichlet' ) THEN
	1133	ibc_p_t = 0
	1134	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1135	ibc_p_t = 1
	1136	ELSE
[215]	1137	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1138	TRIM( bc_p_t ) // '"'
	1139	CALL handle_palm_message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1140	ENDIF
	1141
	1142	!
	1143	!-- Boundary conditions for potential temperature
[102]	1144	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1145	ibc_pt_b = 2
[1]	1146	ELSE
[102]	1147	IF ( bc_pt_b == 'dirichlet' ) THEN
	1148	ibc_pt_b = 0
	1149	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1150	ibc_pt_b = 1
	1151	ELSE
[215]	1152	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1153	TRIM( bc_pt_b ) // '"'
	1154	CALL handle_palm_message( 'check_parameters', 'PA0062', 1, 2, 0, 6, &
	1155	0 )
[1]	1156	ENDIF
	1157	ENDIF
[102]	1158
[1]	1159	IF ( bc_pt_t == 'dirichlet' ) THEN
	1160	ibc_pt_t = 0
	1161	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1162	ibc_pt_t = 1
[19]	1163	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1164	ibc_pt_t = 2
[1]	1165	ELSE
[215]	1166	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1167	TRIM( bc_pt_t ) // '"'
	1168	CALL handle_palm_message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1169	ENDIF
	1170
[20]	1171	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1172	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1173	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1174	top_momentumflux_v /= 9999999.9 ) THEN
	1175	constant_top_momentumflux = .TRUE.
	1176	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1177	top_momentumflux_v == 9999999.9 ) ) THEN
	1178	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1179	'must be set'
	1180	CALL handle_palm_message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1181	ENDIF
[1]	1182
	1183	!
	1184	!-- A given surface temperature implies Dirichlet boundary condition for
	1185	!-- temperature. In this case specification of a constant heat flux is
	1186	!-- forbidden.
	1187	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1188	surface_heatflux /= 0.0 ) THEN
[215]	1189	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1190	'& is not allowed with constant_heatflux = .TRUE.'
	1191	CALL handle_palm_message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1192	ENDIF
	1193	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1194	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1195	'wed with pt_surface_initial_change (/=0) = ', &
	1196	pt_surface_initial_change
	1197	CALL handle_palm_message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1198	ENDIF
	1199
	1200	!
[19]	1201	!-- A given temperature at the top implies Dirichlet boundary condition for
	1202	!-- temperature. In this case specification of a constant heat flux is
	1203	!-- forbidden.
	1204	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1205	top_heatflux /= 0.0 ) THEN
[215]	1206	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1207	'" is not allowed with constant_top_heatflux = .TRUE.'
	1208	CALL handle_palm_message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1209	ENDIF
	1210
	1211	!
[95]	1212	!-- Boundary conditions for salinity
	1213	IF ( ocean ) THEN
	1214	IF ( bc_sa_t == 'dirichlet' ) THEN
	1215	ibc_sa_t = 0
	1216	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1217	ibc_sa_t = 1
	1218	ELSE
[215]	1219	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1220	TRIM( bc_sa_t ) // '"'
	1221	CALL handle_palm_message( 'check_parameters', 'PA0068', 1, 2, 0, 6, &
	1222	0 )
[95]	1223	ENDIF
	1224
	1225	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1226	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1227	message_string = 'boundary condition: bc_sa_t = "' // &
	1228	TRIM( bc_sa_t ) // '" requires to set ' // &
	1229	'top_salinityflux'
	1230	CALL handle_palm_message( 'check_parameters', 'PA0069', 1, 2, 0, 6, &
	1231	0 )
[97]	1232	ENDIF
[95]	1233
	1234	!
	1235	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1236	!-- salinity. In this case specification of a constant salinity flux is
	1237	!-- forbidden.
	1238	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1239	top_salinityflux /= 0.0 ) THEN
[215]	1240	message_string = 'boundary condition: bc_sa_t = "' // &
	1241	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1242	'constant_top_salinityflux = .TRUE.'
	1243	CALL handle_palm_message( 'check_parameters', 'PA0070', 1, 2, 0, 6, &
	1244	0 )
[95]	1245	ENDIF
	1246
	1247	ENDIF
	1248
	1249	!
[75]	1250	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1251	!-- water content / scalar
[75]	1252	IF ( humidity .OR. passive_scalar ) THEN
	1253	IF ( humidity ) THEN
[1]	1254	sq = 'q'
	1255	ELSE
	1256	sq = 's'
	1257	ENDIF
	1258	IF ( bc_q_b == 'dirichlet' ) THEN
	1259	ibc_q_b = 0
	1260	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1261	ibc_q_b = 1
	1262	ELSE
[215]	1263	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1264	'_b ="' // TRIM( bc_q_b ) // '"'
	1265	CALL handle_palm_message( 'check_parameters', 'PA0071', 1, 2, 0, 6, &
	1266	0 )
[1]	1267	ENDIF
	1268	IF ( bc_q_t == 'dirichlet' ) THEN
	1269	ibc_q_t = 0
	1270	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1271	ibc_q_t = 1
	1272	ELSE
[215]	1273	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1274	'_t ="' // TRIM( bc_q_t ) // '"'
	1275	CALL handle_palm_message( 'check_parameters', 'PA0072', 1, 2, 0, 6, &
	1276	0 )
[1]	1277	ENDIF
	1278
	1279	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1280
	1281	!
	1282	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1283	!-- humidity. In this case specification of a constant water flux is
[1]	1284	!-- forbidden.
	1285	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1286	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1287	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1288	'th prescribed surface flux'
	1289	CALL handle_palm_message( 'check_parameters', 'PA0073', 1, 2, 0, 6, &
	1290	0 )
[1]	1291	ENDIF
	1292	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1293	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1294	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1295	q_surface_initial_change
	1296	CALL handle_palm_message( 'check_parameters', 'PA0074', 1, 2, 0, 6, &
	1297	0 )
[1]	1298	ENDIF
	1299
	1300	ENDIF
	1301
	1302	!
	1303	!-- Boundary conditions for horizontal components of wind speed
	1304	IF ( bc_uv_b == 'dirichlet' ) THEN
	1305	ibc_uv_b = 0
	1306	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1307	ibc_uv_b = 1
	1308	IF ( prandtl_layer ) THEN
[215]	1309	message_string = 'boundary condition: bc_uv_b = "' // &
	1310	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
	1311	CALL handle_palm_message( 'check_parameters', 'PA0075', 1, 2, 0, 6, &
	1312	0 )
[1]	1313	ENDIF
	1314	ELSE
[215]	1315	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1316	TRIM( bc_uv_b ) // '"'
	1317	CALL handle_palm_message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1318	ENDIF
[215]	1319
[108]	1320	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1321	bc_uv_t = 'neumann'
[1]	1322	ibc_uv_t = 1
	1323	ELSE
[132]	1324	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1325	ibc_uv_t = 0
	1326	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1327	ibc_uv_t = 1
	1328	ELSE
[215]	1329	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1330	TRIM( bc_uv_t ) // '"'
	1331	CALL handle_palm_message( 'check_parameters', 'PA0077', 1, 2, 0, 6, &
	1332	0 )
[1]	1333	ENDIF
	1334	ENDIF
	1335
	1336	!
	1337	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1338	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1339	IF ( momentum_advec == 'ups-scheme' ) THEN
	1340	rayleigh_damping_factor = 0.01
	1341	ELSE
	1342	rayleigh_damping_factor = 0.0
	1343	ENDIF
	1344	ELSE
	1345	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1346	THEN
[215]	1347	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1348	rayleigh_damping_factor, ' out of range [0.0,1.0]'
	1349	CALL handle_palm_message( 'check_parameters', 'PA0078', 1, 2, 0, 6, &
	1350	0 )
[1]	1351	ENDIF
	1352	ENDIF
	1353
	1354	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1355	IF ( .NOT. ocean ) THEN
	1356	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1357	ELSE
	1358	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1359	ENDIF
[1]	1360	ELSE
[108]	1361	IF ( .NOT. ocean ) THEN
	1362	IF ( rayleigh_damping_height < 0.0 .OR. &
	1363	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1364	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1365	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
	1366	CALL handle_palm_message( 'check_parameters', 'PA0079', 1, 2, 0, &
	1367	6, 0 )
[1]	1368	ENDIF
[108]	1369	ELSE
	1370	IF ( rayleigh_damping_height > 0.0 .OR. &
	1371	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1372	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1373	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
	1374	CALL handle_palm_message( 'check_parameters', 'PA0079', 1, 2, 0, &
	1375	6, 0 )
[108]	1376	ENDIF
[1]	1377	ENDIF
	1378	ENDIF
	1379
	1380	!
	1381	!-- Check limiters for Upstream-Spline scheme
	1382	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1383	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1384	overshoot_limit_e < 0.0 ) THEN
[215]	1385	message_string = 'overshoot_limit_... < 0.0 is not allowed'
	1386	CALL handle_palm_message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
[1]	1387	ENDIF
	1388	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1389	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
[215]	1390	message_string = 'ups_limit_... < 0.0 is not allowed'
	1391	CALL handle_palm_message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
[1]	1392	ENDIF
	1393
	1394	!
	1395	!-- Check number of chosen statistic regions. More than 10 regions are not
	1396	!-- allowed, because so far no more than 10 corresponding output files can
	1397	!-- be opened (cf. check_open)
	1398	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1399	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1400	statistic_regions+1, ' but only 10 regions are allowed'
	1401	CALL handle_palm_message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1402	ENDIF
	1403	IF ( normalizing_region > statistic_regions .OR. &
	1404	normalizing_region < 0) THEN
[215]	1405	WRITE ( message_string, * ) 'normalizing_region = ', &
	1406	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1407	' (value of statistic_regions)'
	1408	CALL handle_palm_message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1409	ENDIF
	1410
	1411	!
[116]	1412	!-- Check the interval for sorting particles.
	1413	!-- Using particles as cloud droplets requires sorting after each timestep.
	1414	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1415	dt_sort_particles = 0.0
[215]	1416	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1417	'_droplets = .TRUE.'
	1418	CALL handle_palm_message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1419	ENDIF
	1420
	1421	!
[1]	1422	!-- Set the default intervals for data output, if necessary
	1423	!-- NOTE: dt_dosp has already been set in package_parin
	1424	IF ( dt_data_output /= 9999999.9 ) THEN
	1425	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1426	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1427	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1428	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1429	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1430	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1431	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1432	ENDIF
	1433
	1434	!
	1435	!-- Set the default skip time intervals for data output, if necessary
	1436	IF ( skip_time_dopr == 9999999.9 ) &
	1437	skip_time_dopr = skip_time_data_output
	1438	IF ( skip_time_dosp == 9999999.9 ) &
	1439	skip_time_dosp = skip_time_data_output
	1440	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1441	skip_time_do2d_xy = skip_time_data_output
	1442	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1443	skip_time_do2d_xz = skip_time_data_output
	1444	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1445	skip_time_do2d_yz = skip_time_data_output
	1446	IF ( skip_time_do3d == 9999999.9 ) &
	1447	skip_time_do3d = skip_time_data_output
	1448	IF ( skip_time_data_output_av == 9999999.9 ) &
	1449	skip_time_data_output_av = skip_time_data_output
	1450
	1451	!
	1452	!-- Check the average intervals (first for 3d-data, then for profiles and
	1453	!-- spectra)
	1454	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1455	WRITE( message_string, * ) 'averaging_interval = ', &
	1456	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
	1457	CALL handle_palm_message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1458	ENDIF
	1459
	1460	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1461	averaging_interval_pr = averaging_interval
	1462	ENDIF
	1463
	1464	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1465	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1466	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
	1467	CALL handle_palm_message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1468	ENDIF
	1469
	1470	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1471	averaging_interval_sp = averaging_interval
	1472	ENDIF
	1473
	1474	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1475	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1476	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
	1477	CALL handle_palm_message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1478	ENDIF
	1479
	1480	!
	1481	!-- Set the default interval for profiles entering the temporal average
	1482	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1483	dt_averaging_input_pr = dt_averaging_input
	1484	ENDIF
	1485
	1486	!
	1487	!-- Set the default interval for the output of timeseries to a reasonable
	1488	!-- value (tries to minimize the number of calls of flow_statistics)
	1489	IF ( dt_dots == 9999999.9 ) THEN
	1490	IF ( averaging_interval_pr == 0.0 ) THEN
	1491	dt_dots = MIN( dt_run_control, dt_dopr )
	1492	ELSE
	1493	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1494	ENDIF
	1495	ENDIF
	1496
	1497	!
	1498	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1499	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1500	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1501	dt_averaging_input, ' must be <= averaging_interval = ', &
	1502	averaging_interval
	1503	CALL handle_palm_message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1504	ENDIF
	1505
	1506	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1507	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1508	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1509	averaging_interval_pr
	1510	CALL handle_palm_message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1511	ENDIF
	1512
	1513	!
[72]	1514	!-- Set the default value for the integration interval of precipitation amount
	1515	IF ( precipitation ) THEN
	1516	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1517	precipitation_amount_interval = dt_do2d_xy
	1518	ELSE
	1519	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1520	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1521	precipitation_amount_interval, ' must not be larger than ', &
	1522	'dt_do2d_xy = ', dt_do2d_xy
	1523	CALL handle_palm_message( 'check_parameters', 'PA0090', 1, 2, 0, &
	1524	6, 0 )
[72]	1525	ENDIF
	1526	ENDIF
	1527	ENDIF
	1528
	1529	!
[1]	1530	!-- Determine the number of output profiles and check whether they are
	1531	!-- permissible
	1532	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1533
	1534	dopr_n = dopr_n + 1
	1535	i = dopr_n
	1536
	1537	!
	1538	!-- Determine internal profile number (for hom, homs)
	1539	!-- and store height levels
	1540	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1541
	1542	CASE ( 'u', '#u' )
	1543	dopr_index(i) = 1
[87]	1544	dopr_unit(i) = 'm/s'
[1]	1545	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1546	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1547	dopr_initial_index(i) = 5
	1548	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1549	data_output_pr(i) = data_output_pr(i)(2:)
	1550	ENDIF
	1551
	1552	CASE ( 'v', '#v' )
	1553	dopr_index(i) = 2
[87]	1554	dopr_unit(i) = 'm/s'
	1555	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1556	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1557	dopr_initial_index(i) = 6
	1558	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1559	data_output_pr(i) = data_output_pr(i)(2:)
	1560	ENDIF
	1561
	1562	CASE ( 'w' )
	1563	dopr_index(i) = 3
[87]	1564	dopr_unit(i) = 'm/s'
	1565	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1566
	1567	CASE ( 'pt', '#pt' )
	1568	IF ( .NOT. cloud_physics ) THEN
	1569	dopr_index(i) = 4
[87]	1570	dopr_unit(i) = 'K'
[1]	1571	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1572	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1573	dopr_initial_index(i) = 7
	1574	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1575	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1576	data_output_pr(i) = data_output_pr(i)(2:)
	1577	ENDIF
	1578	ELSE
	1579	dopr_index(i) = 43
[87]	1580	dopr_unit(i) = 'K'
[1]	1581	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1582	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1583	dopr_initial_index(i) = 28
	1584	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1585	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1586	data_output_pr(i) = data_output_pr(i)(2:)
	1587	ENDIF
	1588	ENDIF
	1589
	1590	CASE ( 'e' )
	1591	dopr_index(i) = 8
[87]	1592	dopr_unit(i) = 'm2/s2'
[1]	1593	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1594	hom(nzb,2,8,:) = 0.0
	1595
	1596	CASE ( 'km', '#km' )
	1597	dopr_index(i) = 9
[87]	1598	dopr_unit(i) = 'm2/s'
[1]	1599	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1600	hom(nzb,2,9,:) = 0.0
	1601	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1602	dopr_initial_index(i) = 23
	1603	hom(:,2,23,:) = hom(:,2,9,:)
	1604	data_output_pr(i) = data_output_pr(i)(2:)
	1605	ENDIF
	1606
	1607	CASE ( 'kh', '#kh' )
	1608	dopr_index(i) = 10
[87]	1609	dopr_unit(i) = 'm2/s'
[1]	1610	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1611	hom(nzb,2,10,:) = 0.0
	1612	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1613	dopr_initial_index(i) = 24
	1614	hom(:,2,24,:) = hom(:,2,10,:)
	1615	data_output_pr(i) = data_output_pr(i)(2:)
	1616	ENDIF
	1617
	1618	CASE ( 'l', '#l' )
	1619	dopr_index(i) = 11
[87]	1620	dopr_unit(i) = 'm'
[1]	1621	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1622	hom(nzb,2,11,:) = 0.0
	1623	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1624	dopr_initial_index(i) = 25
	1625	hom(:,2,25,:) = hom(:,2,11,:)
	1626	data_output_pr(i) = data_output_pr(i)(2:)
	1627	ENDIF
	1628
	1629	CASE ( 'w"u"' )
	1630	dopr_index(i) = 12
[87]	1631	dopr_unit(i) = 'm2/s2'
[1]	1632	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1633	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1634
	1635	CASE ( 'wu' )
	1636	dopr_index(i) = 13
[87]	1637	dopr_unit(i) = 'm2/s2'
[1]	1638	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1639
	1640	CASE ( 'w"v"' )
	1641	dopr_index(i) = 14
[87]	1642	dopr_unit(i) = 'm2/s2'
[1]	1643	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1644	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1645
	1646	CASE ( 'wv' )
	1647	dopr_index(i) = 15
[87]	1648	dopr_unit(i) = 'm2/s2'
[1]	1649	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1650
	1651	CASE ( 'w"pt"' )
	1652	dopr_index(i) = 16
[87]	1653	dopr_unit(i) = 'K m/s'
[1]	1654	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1655
	1656	CASE ( 'wpt' )
	1657	dopr_index(i) = 17
[87]	1658	dopr_unit(i) = 'K m/s'
[1]	1659	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1660
	1661	CASE ( 'wpt' )
	1662	dopr_index(i) = 18
[87]	1663	dopr_unit(i) = 'K m/s'
[1]	1664	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1665
	1666	CASE ( 'wu' )
	1667	dopr_index(i) = 19
[87]	1668	dopr_unit(i) = 'm2/s2'
[1]	1669	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1670	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1671
	1672	CASE ( 'wv' )
	1673	dopr_index(i) = 20
[87]	1674	dopr_unit(i) = 'm2/s2'
[1]	1675	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1676	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1677
	1678	CASE ( 'wptBC' )
	1679	dopr_index(i) = 21
[87]	1680	dopr_unit(i) = 'K m/s'
[1]	1681	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1682
	1683	CASE ( 'wptBC' )
	1684	dopr_index(i) = 22
[87]	1685	dopr_unit(i) = 'K m/s'
[1]	1686	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1687
[96]	1688	CASE ( 'sa', '#sa' )
	1689	IF ( .NOT. ocean ) THEN
[215]	1690	message_string = 'data_output_pr = ' // &
	1691	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1692	'lemented for ocean = .FALSE.'
	1693	CALL handle_palm_message( 'check_parameters', 'PA0091', 1, 2, &
	1694	0, 6, 0 )
[96]	1695	ELSE
	1696	dopr_index(i) = 23
	1697	dopr_unit(i) = 'psu'
	1698	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1699	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1700	dopr_initial_index(i) = 26
	1701	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1702	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1703	data_output_pr(i) = data_output_pr(i)(2:)
	1704	ENDIF
	1705	ENDIF
	1706
[1]	1707	CASE ( 'u*2' )
	1708	dopr_index(i) = 30
[87]	1709	dopr_unit(i) = 'm2/s2'
[1]	1710	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1711
	1712	CASE ( 'v*2' )
	1713	dopr_index(i) = 31
[87]	1714	dopr_unit(i) = 'm2/s2'
[1]	1715	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1716
	1717	CASE ( 'w*2' )
	1718	dopr_index(i) = 32
[87]	1719	dopr_unit(i) = 'm2/s2'
[1]	1720	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1721
	1722	CASE ( 'pt*2' )
	1723	dopr_index(i) = 33
[87]	1724	dopr_unit(i) = 'K2'
[1]	1725	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1726
	1727	CASE ( 'e*' )
	1728	dopr_index(i) = 34
[87]	1729	dopr_unit(i) = 'm2/s2'
[1]	1730	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1731
	1732	CASE ( 'w2pt' )
	1733	dopr_index(i) = 35
[87]	1734	dopr_unit(i) = 'K m2/s2'
[1]	1735	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1736
	1737	CASE ( 'wpt2' )
	1738	dopr_index(i) = 36
[87]	1739	dopr_unit(i) = 'K2 m/s'
[1]	1740	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1741
	1742	CASE ( 'we' )
	1743	dopr_index(i) = 37
[87]	1744	dopr_unit(i) = 'm3/s3'
[1]	1745	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1746
	1747	CASE ( 'w*3' )
	1748	dopr_index(i) = 38
[87]	1749	dopr_unit(i) = 'm3/s3'
[1]	1750	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1751
	1752	CASE ( 'Sw' )
	1753	dopr_index(i) = 39
[89]	1754	dopr_unit(i) = 'none'
[1]	1755	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1756
	1757	CASE ( 'q', '#q' )
[108]	1758	IF ( .NOT. humidity ) THEN
[215]	1759	message_string = 'data_output_pr = ' // &
	1760	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1761	'lemented for humidity = .FALSE.'
	1762	CALL handle_palm_message( 'check_parameters', 'PA0092', 1, 2, &
	1763	0, 6, 0 )
[1]	1764	ELSE
	1765	dopr_index(i) = 41
[87]	1766	dopr_unit(i) = 'kg/kg'
	1767	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1768	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1769	dopr_initial_index(i) = 26
	1770	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1771	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1772	data_output_pr(i) = data_output_pr(i)(2:)
	1773	ENDIF
	1774	ENDIF
	1775
	1776	CASE ( 's', '#s' )
	1777	IF ( .NOT. passive_scalar ) THEN
[215]	1778	message_string = 'data_output_pr = ' // &
	1779	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1780	'lemented for passive_scalar = .FALSE.'
	1781	CALL handle_palm_message( 'check_parameters', 'PA0093', 1, 2, &
	1782	0, 6, 0 )
[1]	1783	ELSE
	1784	dopr_index(i) = 41
[87]	1785	dopr_unit(i) = 'kg/m3'
	1786	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1787	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1788	dopr_initial_index(i) = 26
	1789	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1790	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1791	data_output_pr(i) = data_output_pr(i)(2:)
	1792	ENDIF
	1793	ENDIF
	1794
	1795	CASE ( 'qv', '#qv' )
	1796	IF ( .NOT. cloud_physics ) THEN
	1797	dopr_index(i) = 41
[87]	1798	dopr_unit(i) = 'kg/kg'
	1799	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1800	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1801	dopr_initial_index(i) = 26
	1802	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1803	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1804	data_output_pr(i) = data_output_pr(i)(2:)
	1805	ENDIF
	1806	ELSE
	1807	dopr_index(i) = 42
[87]	1808	dopr_unit(i) = 'kg/kg'
	1809	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1810	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1811	dopr_initial_index(i) = 27
	1812	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1813	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1814	data_output_pr(i) = data_output_pr(i)(2:)
	1815	ENDIF
	1816	ENDIF
	1817
	1818	CASE ( 'lpt', '#lpt' )
	1819	IF ( .NOT. cloud_physics ) THEN
[215]	1820	message_string = 'data_output_pr = ' // &
	1821	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1822	'lemented for cloud_physics = .FALSE.'
	1823	CALL handle_palm_message( 'check_parameters', 'PA0094', 1, 2, &
	1824	0, 6, 0 )
[1]	1825	ELSE
	1826	dopr_index(i) = 4
[87]	1827	dopr_unit(i) = 'K'
[1]	1828	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1829	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1830	dopr_initial_index(i) = 7
	1831	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1832	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1833	data_output_pr(i) = data_output_pr(i)(2:)
	1834	ENDIF
	1835	ENDIF
	1836
	1837	CASE ( 'vpt', '#vpt' )
	1838	dopr_index(i) = 44
[87]	1839	dopr_unit(i) = 'K'
	1840	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1841	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1842	dopr_initial_index(i) = 29
	1843	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1844	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1845	data_output_pr(i) = data_output_pr(i)(2:)
	1846	ENDIF
	1847
	1848	CASE ( 'w"vpt"' )
	1849	dopr_index(i) = 45
[87]	1850	dopr_unit(i) = 'K m/s'
[1]	1851	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1852
	1853	CASE ( 'wvpt' )
	1854	dopr_index(i) = 46
[87]	1855	dopr_unit(i) = 'K m/s'
[1]	1856	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1857
	1858	CASE ( 'wvpt' )
	1859	dopr_index(i) = 47
[87]	1860	dopr_unit(i) = 'K m/s'
[1]	1861	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	1862
	1863	CASE ( 'w"q"' )
[108]	1864	IF ( .NOT. humidity ) THEN
[215]	1865	message_string = 'data_output_pr = ' // &
	1866	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1867	'lemented for humidity = .FALSE.'
	1868	CALL handle_palm_message( 'check_parameters', 'PA0092', 1, 2, &
	1869	0, 6, 0 )
[1]	1870	ELSE
	1871	dopr_index(i) = 48
[87]	1872	dopr_unit(i) = 'kg/kg m/s'
[1]	1873	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1874	ENDIF
	1875
	1876	CASE ( 'wq' )
[108]	1877	IF ( .NOT. humidity ) THEN
[215]	1878	message_string = 'data_output_pr = ' // &
	1879	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1880	'lemented for humidity = .FALSE.'
	1881	CALL handle_palm_message( 'check_parameters', 'PA0092', 1, 2, &
	1882	0, 6, 0 )
[1]	1883	ELSE
	1884	dopr_index(i) = 49
[87]	1885	dopr_unit(i) = 'kg/kg m/s'
[1]	1886	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1887	ENDIF
	1888
	1889	CASE ( 'wq' )
[108]	1890	IF ( .NOT. humidity ) THEN
[215]	1891	message_string = 'data_output_pr = ' // &
	1892	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1893	'lemented for humidity = .FALSE.'
	1894	CALL handle_palm_message( 'check_parameters', 'PA0092', 1, 2, &
	1895	0, 6, 0 )
[1]	1896	ELSE
	1897	dopr_index(i) = 50
[87]	1898	dopr_unit(i) = 'kg/kg m/s'
[1]	1899	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1900	ENDIF
	1901
	1902	CASE ( 'w"s"' )
	1903	IF ( .NOT. passive_scalar ) THEN
[215]	1904	message_string = 'data_output_pr = ' // &
	1905	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1906	'lemented for passive_scalar = .FALSE.'
	1907	CALL handle_palm_message( 'check_parameters', 'PA0093', 1, 2, &
	1908	0, 6, 0 )
[1]	1909	ELSE
	1910	dopr_index(i) = 48
[87]	1911	dopr_unit(i) = 'kg/m3 m/s'
[1]	1912	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	1913	ENDIF
	1914
	1915	CASE ( 'ws' )
	1916	IF ( .NOT. passive_scalar ) THEN
[215]	1917	message_string = 'data_output_pr = ' // &
	1918	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1919	'lemented for passive_scalar = .FALSE.'
	1920	CALL handle_palm_message( 'check_parameters', 'PA0093', 1, 2, &
	1921	0, 6, 0 )
[1]	1922	ELSE
	1923	dopr_index(i) = 49
[87]	1924	dopr_unit(i) = 'kg/m3 m/s'
[1]	1925	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	1926	ENDIF
	1927
	1928	CASE ( 'ws' )
	1929	IF ( .NOT. passive_scalar ) THEN
[215]	1930	message_string = 'data_output_pr = ' // &
	1931	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1932	'lemented for passive_scalar = .FALSE.'
	1933	CALL handle_palm_message( 'check_parameters', 'PA0093', 1, 2, &
	1934	0, 6, 0 )
[1]	1935	ELSE
	1936	dopr_index(i) = 50
[87]	1937	dopr_unit(i) = 'kg/m3 m/s'
[1]	1938	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	1939	ENDIF
	1940
	1941	CASE ( 'w"qv"' )
[75]	1942	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1943	THEN
	1944	dopr_index(i) = 48
[87]	1945	dopr_unit(i) = 'kg/kg m/s'
[1]	1946	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1947	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1948	dopr_index(i) = 51
[87]	1949	dopr_unit(i) = 'kg/kg m/s'
[1]	1950	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	1951	ELSE
[215]	1952	message_string = 'data_output_pr = ' // &
	1953	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1954	'lemented for cloud_physics = .FALSE. an&' // &
	1955	'd humidity = .FALSE.'
	1956	CALL handle_palm_message( 'check_parameters', 'PA0095', 1, 2, &
	1957	0, 6, 0 )
[1]	1958	ENDIF
	1959
	1960	CASE ( 'wqv' )
[75]	1961	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1962	THEN
	1963	dopr_index(i) = 49
[87]	1964	dopr_unit(i) = 'kg/kg m/s'
[1]	1965	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1966	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1967	dopr_index(i) = 52
[87]	1968	dopr_unit(i) = 'kg/kg m/s'
[1]	1969	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	1970	ELSE
[215]	1971	message_string = 'data_output_pr = ' // &
	1972	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1973	'lemented for cloud_physics = .FALSE. an&' // &
	1974	'd humidity = .FALSE.'
	1975	CALL handle_palm_message( 'check_parameters', 'PA0095', 1, 2, &
	1976	0, 6, 0 )
[1]	1977	ENDIF
	1978
	1979	CASE ( 'wqv' )
[75]	1980	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	1981	THEN
	1982	dopr_index(i) = 50
[87]	1983	dopr_unit(i) = 'kg/kg m/s'
[1]	1984	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	1985	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	1986	dopr_index(i) = 53
[87]	1987	dopr_unit(i) = 'kg/kg m/s'
[1]	1988	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	1989	ELSE
[215]	1990	message_string = 'data_output_pr = ' // &
	1991	TRIM( data_output_pr(i) ) // ' is not imp' // &
	1992	'lemented for cloud_physics = .FALSE. an&' // &
	1993	'd humidity = .FALSE.'
	1994	CALL handle_palm_message( 'check_parameters', 'PA0095', 1, 2, &
	1995	0, 6, 0 )
[1]	1996	ENDIF
	1997
	1998	CASE ( 'ql' )
	1999	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2000	message_string = 'data_output_pr = ' // &
	2001	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2002	'lemented for cloud_physics = .FALSE. or' // &
	2003	'&cloud_droplets = .FALSE.'
	2004	CALL handle_palm_message( 'check_parameters', 'PA0096', 1, 2, &
	2005	0, 6, 0 )
[1]	2006	ELSE
	2007	dopr_index(i) = 54
[87]	2008	dopr_unit(i) = 'kg/kg'
[1]	2009	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2010	ENDIF
	2011
	2012	CASE ( 'wuu*/dz' )
	2013	dopr_index(i) = 55
[87]	2014	dopr_unit(i) = 'm2/s3'
[1]	2015	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2016
	2017	CASE ( 'wp/dz' )
	2018	dopr_index(i) = 56
[87]	2019	dopr_unit(i) = 'm2/s3'
[106]	2020	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2021
	2022	CASE ( 'w"e/dz' )
	2023	dopr_index(i) = 57
[87]	2024	dopr_unit(i) = 'm2/s3'
[1]	2025	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2026
	2027	CASE ( 'u"pt"' )
	2028	dopr_index(i) = 58
[87]	2029	dopr_unit(i) = 'K m/s'
[1]	2030	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2031
	2032	CASE ( 'upt' )
	2033	dopr_index(i) = 59
[87]	2034	dopr_unit(i) = 'K m/s'
[1]	2035	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2036
	2037	CASE ( 'upt_t' )
	2038	dopr_index(i) = 60
[87]	2039	dopr_unit(i) = 'K m/s'
[1]	2040	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2041
	2042	CASE ( 'v"pt"' )
	2043	dopr_index(i) = 61
[87]	2044	dopr_unit(i) = 'K m/s'
[1]	2045	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2046
	2047	CASE ( 'vpt' )
	2048	dopr_index(i) = 62
[87]	2049	dopr_unit(i) = 'K m/s'
[1]	2050	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2051
	2052	CASE ( 'vpt_t' )
	2053	dopr_index(i) = 63
[87]	2054	dopr_unit(i) = 'K m/s'
[1]	2055	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2056
[96]	2057	CASE ( 'rho' )
	2058	dopr_index(i) = 64
	2059	dopr_unit(i) = 'kg/m3'
	2060	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2061
[96]	2062	CASE ( 'w"sa"' )
	2063	IF ( .NOT. ocean ) THEN
[215]	2064	message_string = 'data_output_pr = ' // &
	2065	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2066	'lemented for ocean = .FALSE.'
	2067	CALL handle_palm_message( 'check_parameters', 'PA0091', 1, 2, &
	2068	0, 6, 0 )
[96]	2069	ELSE
	2070	dopr_index(i) = 65
	2071	dopr_unit(i) = 'psu m/s'
	2072	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2073	ENDIF
	2074
	2075	CASE ( 'wsa' )
	2076	IF ( .NOT. ocean ) THEN
[215]	2077	message_string = 'data_output_pr = ' // &
	2078	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2079	'lemented for ocean = .FALSE.'
	2080	CALL handle_palm_message( 'check_parameters', 'PA0091', 1, 2, &
	2081	0, 6, 0 )
[96]	2082	ELSE
	2083	dopr_index(i) = 66
	2084	dopr_unit(i) = 'psu m/s'
	2085	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2086	ENDIF
	2087
	2088	CASE ( 'wsa' )
	2089	IF ( .NOT. ocean ) THEN
[215]	2090	message_string = 'data_output_pr = ' // &
	2091	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2092	'lemented for ocean = .FALSE.'
	2093	CALL handle_palm_message( 'check_parameters', 'PA0091', 1, 2, &
	2094	0, 6, 0 )
[96]	2095	ELSE
	2096	dopr_index(i) = 67
	2097	dopr_unit(i) = 'psu m/s'
	2098	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2099	ENDIF
	2100
[106]	2101	CASE ( 'wp' )
	2102	dopr_index(i) = 68
	2103	dopr_unit(i) = 'm3/s3'
	2104	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2105
[106]	2106	CASE ( 'w"e' )
	2107	dopr_index(i) = 69
	2108	dopr_unit(i) = 'm3/s3'
	2109	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2110
[197]	2111	CASE ( 'q*2' )
	2112	IF ( .NOT. humidity ) THEN
[215]	2113	message_string = 'data_output_pr = ' // &
	2114	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2115	'lemented for humidity = .FALSE.'
	2116	CALL handle_palm_message( 'check_parameters', 'PA0092', 1, 2, &
	2117	0, 6, 0 )
[197]	2118	ELSE
	2119	dopr_index(i) = 70
	2120	dopr_unit(i) = 'kg2/kg2'
	2121	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2122	ENDIF
[106]	2123
[1]	2124	CASE DEFAULT
[87]	2125
	2126	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2127
	2128	IF ( unit == 'illegal' ) THEN
[215]	2129	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2130	message_string = 'illegal value for data_output_pr or ' // &
	2131	'data_output_pr_user = "' // &
	2132	TRIM( data_output_pr(i) ) // '"'
	2133	CALL handle_palm_message( 'check_parameters', 'PA0097', 1, &
	2134	2, 0, 6, 0 )
	2135	ELSE
	2136	message_string = 'illegal value for data_output_pr = "' // &
	2137	TRIM( data_output_pr(i) ) // '"'
	2138	CALL handle_palm_message( 'check_parameters', 'PA0098', 1, &
	2139	2, 0, 6, 0 )
[87]	2140	ENDIF
[1]	2141	ENDIF
	2142
	2143	END SELECT
	2144	!
	2145	!-- Check to which of the predefined coordinate systems the profile belongs
	2146	DO k = 1, crmax
	2147	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2148	/=0 ) &
	2149	THEN
	2150	dopr_crossindex(i) = k
	2151	EXIT
	2152	ENDIF
	2153	ENDDO
	2154	!
	2155	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2156	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2157	!-- control characters
	2158	dopr_label(i) = data_output_pr(i)
	2159	position = INDEX( dopr_label(i) , '"' )
	2160	DO WHILE ( position /= 0 )
	2161	dopr_label(i)(position:position) = ''''
	2162	position = INDEX( dopr_label(i) , '"' )
	2163	ENDDO
	2164
	2165	ENDDO
	2166
	2167	!
	2168	!-- y-value range of the coordinate system (PROFIL).
	2169	!-- x-value range determined in plot_1d.
[94]	2170	IF ( .NOT. ocean ) THEN
	2171	cross_uymin = 0.0
	2172	IF ( z_max_do1d == -1.0 ) THEN
	2173	cross_uymax = zu(nzt+1)
	2174	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
[215]	2175	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
	2176	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
	2177	CALL handle_palm_message( 'check_parameters', 'PA0099', 1, 2, 0, 6, &
	2178	0 )
[94]	2179	ELSE
	2180	cross_uymax = z_max_do1d
	2181	ENDIF
[1]	2182	ENDIF
	2183
	2184	!
	2185	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2186	!-- permissible
	2187	DO i = 1, crmax
	2188	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2189
	2190	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2191	j = 0
	2192
	2193	CASE DEFAULT
[215]	2194	message_string = 'unknown normalization method cross_normali' // &
	2195	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
	2196	'"'
	2197	CALL handle_palm_message( 'check_parameters', 'PA0100', 1, 2, 0, &
	2198	6, 0 )
[1]	2199
	2200	END SELECT
	2201	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2202
	2203	CASE ( '', 'z_i' )
	2204	j = 0
	2205
	2206	CASE DEFAULT
[215]	2207	message_string = 'unknown normalization method cross_normali' // &
	2208	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
	2209	'"'
	2210	CALL handle_palm_message( 'check_parameters', 'PA0101', 1, 2, 0, &
	2211	6, 0 )
[1]	2212
	2213	END SELECT
	2214	ENDDO
	2215	!
	2216	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2217	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2218	THEN
[215]	2219	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
	2220	z_max_do1d_normalized, ' must be >= 0.0'
	2221	CALL handle_palm_message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
[1]	2222	ENDIF
	2223
	2224
	2225	!
	2226	!-- Append user-defined data output variables to the standard data output
	2227	IF ( data_output_user(1) /= ' ' ) THEN
	2228	i = 1
	2229	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2230	i = i + 1
	2231	ENDDO
	2232	j = 1
	2233	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2234	IF ( i > 100 ) THEN
[215]	2235	message_string = 'number of output quantitities given by data' // &
	2236	'_output and data_output_user exceeds the limit of 100'
	2237	CALL handle_palm_message( 'check_parameters', 'PA0102', 1, 2, 0, &
	2238	6, 0 )
[1]	2239	ENDIF
	2240	data_output(i) = data_output_user(j)
	2241	i = i + 1
	2242	j = j + 1
	2243	ENDDO
	2244	ENDIF
	2245
	2246	!
	2247	!-- Check and set steering parameters for 2d/3d data output and averaging
	2248	i = 1
	2249	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2250	!
	2251	!-- Check for data averaging
	2252	ilen = LEN_TRIM( data_output(i) )
	2253	j = 0 ! no data averaging
	2254	IF ( ilen > 3 ) THEN
	2255	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2256	j = 1 ! data averaging
	2257	data_output(i) = data_output(i)(1:ilen-3)
	2258	ENDIF
	2259	ENDIF
	2260	!
	2261	!-- Check for cross section or volume data
	2262	ilen = LEN_TRIM( data_output(i) )
	2263	k = 0 ! 3d data
	2264	var = data_output(i)(1:ilen)
	2265	IF ( ilen > 3 ) THEN
	2266	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2267	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2268	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2269	k = 1 ! 2d data
	2270	var = data_output(i)(1:ilen-3)
	2271	ENDIF
	2272	ENDIF
	2273	!
	2274	!-- Check for allowed value and set units
	2275	SELECT CASE ( TRIM( var ) )
	2276
	2277	CASE ( 'e' )
	2278	IF ( constant_diffusion ) THEN
[215]	2279	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2280	'res constant_diffusion = .FALSE.'
	2281	CALL handle_palm_message( 'check_parameters', 'PA0103', 1, 2, &
	2282	0, 6, 0 )
[1]	2283	ENDIF
	2284	unit = 'm2/s2'
	2285
	2286	CASE ( 'pc', 'pr' )
	2287	IF ( .NOT. particle_advection ) THEN
[215]	2288	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2289	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
	2290	CALL handle_palm_message( 'check_parameters', 'PA0104', 1, 2, &
	2291	0, 6, 0 )
[1]	2292	ENDIF
	2293	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2294	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2295
	2296	CASE ( 'q', 'vpt' )
[75]	2297	IF ( .NOT. humidity ) THEN
[215]	2298	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2299	'res humidity = .TRUE.'
	2300	CALL handle_palm_message( 'check_parameters', 'PA0105', 1, 2, &
	2301	0, 6, 0 )
[1]	2302	ENDIF
	2303	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2304	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2305
	2306	CASE ( 'ql' )
	2307	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2308	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2309	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
	2310	CALL handle_palm_message( 'check_parameters', 'PA0106', 1, 2, &
	2311	0, 6, 0 )
[1]	2312	ENDIF
	2313	unit = 'kg/kg'
	2314
	2315	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2316	IF ( .NOT. cloud_droplets ) THEN
[215]	2317	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2318	'res cloud_droplets = .TRUE.'
	2319	CALL handle_palm_message( 'check_parameters', 'PA0107', 1, 2, &
	2320	0, 6, 0 )
[1]	2321	ENDIF
	2322	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2323	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2324	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2325
	2326	CASE ( 'qv' )
	2327	IF ( .NOT. cloud_physics ) THEN
[215]	2328	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2329	'res cloud_physics = .TRUE.'
	2330	CALL handle_palm_message( 'check_parameters', 'PA0108', 1, 2, &
	2331	0, 6, 0 )
[1]	2332	ENDIF
	2333	unit = 'kg/kg'
	2334
[96]	2335	CASE ( 'rho' )
	2336	IF ( .NOT. ocean ) THEN
[215]	2337	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2338	'res ocean = .TRUE.'
	2339	CALL handle_palm_message( 'check_parameters', 'PA0109', 1, 2, &
	2340	0, 6, 0 )
[96]	2341	ENDIF
	2342	unit = 'kg/m3'
	2343
[1]	2344	CASE ( 's' )
	2345	IF ( .NOT. passive_scalar ) THEN
[215]	2346	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2347	'res passive_scalar = .TRUE.'
	2348	CALL handle_palm_message( 'check_parameters', 'PA0110', 1, 2, &
	2349	0, 6, 0 )
[1]	2350	ENDIF
	2351	unit = 'conc'
	2352
[96]	2353	CASE ( 'sa' )
	2354	IF ( .NOT. ocean ) THEN
[215]	2355	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2356	'res ocean = .TRUE.'
	2357	CALL handle_palm_message( 'check_parameters', 'PA0109', 1, 2, &
	2358	0, 6, 0 )
[96]	2359	ENDIF
	2360	unit = 'psu'
	2361
[72]	2362	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
[1]	2363	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2364	message_string = 'illegal value for data_output: "' // &
	2365	TRIM( var ) // '" & only 2d-horizontal ' // &
	2366	'cross sections are allowed for this value'
	2367	CALL handle_palm_message( 'check_parameters', 'PA0111', 1, 2, &
	2368	0, 6, 0 )
[1]	2369	ENDIF
	2370	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2371	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2372	'res cloud_physics = .TRUE.'
	2373	CALL handle_palm_message( 'check_parameters', 'PA0108', 1, 2, &
	2374	0, 6, 0 )
[1]	2375	ENDIF
[72]	2376	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2377	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2378	'res precipitation = .TRUE.'
	2379	CALL handle_palm_message( 'check_parameters', 'PA0112', 1, 2, &
	2380	0, 6, 0 )
[72]	2381	ENDIF
	2382	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2383	message_string = 'temporal averaging of precipitation ' // &
	2384	'amount "' // TRIM( var ) // '" is not possible'
	2385	CALL handle_palm_message( 'check_parameters', 'PA0113', 1, 2, &
	2386	0, 6, 0 )
[72]	2387	ENDIF
	2388	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2389	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2390	'res precipitation = .TRUE.'
	2391	CALL handle_palm_message( 'check_parameters', 'PA0112', 1, 2, &
	2392	0, 6, 0 )
[72]	2393	ENDIF
	2394
	2395
[1]	2396	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2397	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2398	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
[72]	2399	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2400	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2401	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[1]	2402
	2403	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2404	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2405	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2406	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2407	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2408	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2409	CONTINUE
	2410
	2411	CASE DEFAULT
	2412	CALL user_check_data_output( var, unit )
	2413
	2414	IF ( unit == 'illegal' ) THEN
[215]	2415	IF ( data_output_user(1) /= ' ' ) THEN
	2416	message_string = 'illegal value for data_output or ' // &
	2417	'data_output_user = "' // TRIM( data_output(i) ) // '"'
	2418	CALL handle_palm_message( 'check_parameters', 'PA0114', 1, &
	2419	2, 0, 6, 0 )
	2420	ELSE
	2421	message_string = 'illegal value for data_output =' // &
	2422	TRIM( data_output(i) ) // '"'
	2423	CALL handle_palm_message( 'check_parameters', 'PA0115', 1, &
	2424	2, 0, 6, 0 )
[1]	2425	ENDIF
	2426	ENDIF
	2427
	2428	END SELECT
	2429	!
	2430	!-- Set the internal steering parameters appropriately
	2431	IF ( k == 0 ) THEN
	2432	do3d_no(j) = do3d_no(j) + 1
	2433	do3d(j,do3d_no(j)) = data_output(i)
	2434	do3d_unit(j,do3d_no(j)) = unit
	2435	ELSE
	2436	do2d_no(j) = do2d_no(j) + 1
	2437	do2d(j,do2d_no(j)) = data_output(i)
	2438	do2d_unit(j,do2d_no(j)) = unit
	2439	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2440	data_output_xy(j) = .TRUE.
	2441	ENDIF
	2442	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2443	data_output_xz(j) = .TRUE.
	2444	ENDIF
	2445	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2446	data_output_yz(j) = .TRUE.
	2447	ENDIF
	2448	ENDIF
	2449
	2450	IF ( j == 1 ) THEN
	2451	!
	2452	!-- Check, if variable is already subject to averaging
	2453	found = .FALSE.
	2454	DO k = 1, doav_n
	2455	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2456	ENDDO
	2457
	2458	IF ( .NOT. found ) THEN
	2459	doav_n = doav_n + 1
	2460	doav(doav_n) = var
	2461	ENDIF
	2462	ENDIF
	2463
	2464	i = i + 1
	2465	ENDDO
	2466
	2467	!
	2468	!-- Store sectional planes in one shared array
	2469	section(:,1) = section_xy
	2470	section(:,2) = section_xz
	2471	section(:,3) = section_yz
	2472
	2473	!
	2474	!-- Upper plot limit (grid point value) for 1D profiles
	2475	IF ( z_max_do1d == -1.0 ) THEN
	2476	nz_do1d = nzt+1
	2477	ELSE
	2478	DO k = nzb+1, nzt+1
	2479	nz_do1d = k
	2480	IF ( zw(k) > z_max_do1d ) EXIT
	2481	ENDDO
	2482	ENDIF
	2483
	2484	!
	2485	!-- Upper plot limit for 2D vertical sections
	2486	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2487	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2488	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2489	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2490	' (zu(nzt))'
	2491	CALL handle_palm_message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2492	ENDIF
	2493
	2494	!
	2495	!-- Upper plot limit for 3D arrays
	2496	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2497
	2498	!
	2499	!-- Determine and check accuracy for compressed 3D plot output
	2500	IF ( do3d_compress ) THEN
	2501	!
	2502	!-- Compression only permissible on T3E machines
	2503	IF ( host(1:3) /= 't3e' ) THEN
[215]	2504	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2505	TRIM( host ) // '"'
	2506	CALL handle_palm_message( 'check_parameters', 'PA0117', 1, 2, 0, 6, &
	2507	0 )
[1]	2508	ENDIF
	2509
	2510	i = 1
	2511	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2512
	2513	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2514	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2515	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2516	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2517	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
	2518	CALL handle_palm_message( 'check_parameters', 'PA0118', 1, 2, 0, &
	2519	6, 0 )
[1]	2520	ENDIF
	2521
	2522	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2523	var = do3d_comp_prec(i)(1:ilen-1)
	2524
	2525	SELECT CASE ( var )
	2526
	2527	CASE ( 'u' )
	2528	j = 1
	2529	CASE ( 'v' )
	2530	j = 2
	2531	CASE ( 'w' )
	2532	j = 3
	2533	CASE ( 'p' )
	2534	j = 4
	2535	CASE ( 'pt' )
	2536	j = 5
	2537
	2538	CASE DEFAULT
[215]	2539	WRITE( message_string, * ) 'unknown variable "', &
	2540	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2541	i, ')'
	2542	CALL handle_palm_message( 'check_parameters', 'PA0119', 1, 2, &
	2543	0, 6, 0 )
[1]	2544
	2545	END SELECT
	2546
	2547	plot_3d_precision(j)%precision = prec
	2548	i = i + 1
	2549
	2550	ENDDO
	2551	ENDIF
	2552
	2553	!
	2554	!-- Check the data output format(s)
	2555	IF ( data_output_format(1) == ' ' ) THEN
	2556	!
	2557	!-- Default value
	2558	netcdf_output = .TRUE.
	2559	ELSE
	2560	i = 1
	2561	DO WHILE ( data_output_format(i) /= ' ' )
	2562
	2563	SELECT CASE ( data_output_format(i) )
	2564
	2565	CASE ( 'netcdf' )
	2566	netcdf_output = .TRUE.
	2567	CASE ( 'iso2d' )
	2568	iso2d_output = .TRUE.
	2569	CASE ( 'profil' )
	2570	profil_output = .TRUE.
	2571	CASE ( 'avs' )
	2572	avs_output = .TRUE.
	2573
	2574	CASE DEFAULT
[215]	2575	message_string = 'unknown value for data_output_format "' // &
	2576	TRIM( data_output_format(i) ) // '"'
	2577	CALL handle_palm_message( 'check_parameters', 'PA0120', 1, 2, &
	2578	0, 6, 0 )
[1]	2579
	2580	END SELECT
	2581
	2582	i = i + 1
	2583	IF ( i > 10 ) EXIT
	2584
	2585	ENDDO
	2586
	2587	ENDIF
	2588
	2589	!
	2590	!-- Check netcdf precison
	2591	ldum = .FALSE.
	2592	CALL define_netcdf_header( 'ch', ldum, 0 )
	2593
	2594	!
	2595	!-- Check, whether a constant diffusion coefficient shall be used
	2596	IF ( km_constant /= -1.0 ) THEN
	2597	IF ( km_constant < 0.0 ) THEN
[215]	2598	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
	2599	CALL handle_palm_message( 'check_parameters', 'PA0121', 1, 2, 0, 6, &
	2600	0 )
[1]	2601	ELSE
	2602	IF ( prandtl_number < 0.0 ) THEN
[215]	2603	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2604	' < 0.0'
	2605	CALL handle_palm_message( 'check_parameters', 'PA0122', 1, 2, 0, &
	2606	6, 0 )
[1]	2607	ENDIF
	2608	constant_diffusion = .TRUE.
	2609
	2610	IF ( prandtl_layer ) THEN
[215]	2611	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2612	'value of km'
	2613	CALL handle_palm_message( 'check_parameters', 'PA0123', 1, 2, 0, &
	2614	6, 0 )
[1]	2615	ENDIF
	2616	ENDIF
	2617	ENDIF
	2618
	2619	!
	2620	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2621	!-- for the horizontal diffusivity used within the outflow damping layer,
	2622	!-- and check/set the width of the damping layer
	2623	IF ( bc_lr /= 'cyclic' ) THEN
	2624	IF ( km_damp_max == -1.0 ) THEN
	2625	km_damp_max = 0.5 * dx
	2626	ENDIF
	2627	IF ( outflow_damping_width == -1.0 ) THEN
	2628	outflow_damping_width = MIN( 20, nx/2 )
	2629	ENDIF
	2630	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
[215]	2631	message_string = 'outflow_damping width out of range'
	2632	CALL handle_palm_message( 'check_parameters', 'PA0124', 1, 2, 0, 6, &
	2633	0 )
[1]	2634	ENDIF
	2635	ENDIF
	2636
	2637	IF ( bc_ns /= 'cyclic' ) THEN
	2638	IF ( km_damp_max == -1.0 ) THEN
	2639	km_damp_max = 0.5 * dy
	2640	ENDIF
	2641	IF ( outflow_damping_width == -1.0 ) THEN
	2642	outflow_damping_width = MIN( 20, ny/2 )
	2643	ENDIF
	2644	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
[215]	2645	message_string = 'outflow_damping width out of range'
	2646	CALL handle_palm_message( 'check_parameters', 'PA0124', 1, 2, 0, 6, &
	2647	0 )
[1]	2648	ENDIF
	2649	ENDIF
	2650
	2651	!
	2652	!-- Check value range for rif
	2653	IF ( rif_min >= rif_max ) THEN
[215]	2654	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2655	'than rif_max = ', rif_max
	2656	CALL handle_palm_message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2657	ENDIF
	2658
	2659	!
	2660	!-- Determine upper and lower hight level indices for random perturbations
[97]	2661	IF ( disturbance_level_b == -9999999.9 ) THEN
	2662	IF ( ocean ) THEN
	2663	disturbance_level_b = zu((nzt*2)/3)
	2664	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2665	ELSE
	2666	disturbance_level_b = zu(nzb+3)
	2667	disturbance_level_ind_b = nzb + 3
	2668	ENDIF
[1]	2669	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2670	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2671	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
	2672	CALL handle_palm_message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2673	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2674	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2675	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
	2676	CALL handle_palm_message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2677	ELSE
	2678	DO k = 3, nzt-2
	2679	IF ( disturbance_level_b <= zu(k) ) THEN
	2680	disturbance_level_ind_b = k
	2681	EXIT
	2682	ENDIF
	2683	ENDDO
	2684	ENDIF
	2685
[97]	2686	IF ( disturbance_level_t == -9999999.9 ) THEN
	2687	IF ( ocean ) THEN
	2688	disturbance_level_t = zu(nzt-3)
	2689	disturbance_level_ind_t = nzt - 3
	2690	ELSE
	2691	disturbance_level_t = zu(nzt/3)
	2692	disturbance_level_ind_t = nzt / 3
	2693	ENDIF
[1]	2694	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2695	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2696	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
	2697	CALL handle_palm_message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2698	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2699	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2700	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2701	disturbance_level_b
	2702	CALL handle_palm_message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2703	ELSE
	2704	DO k = 3, nzt-2
	2705	IF ( disturbance_level_t <= zu(k) ) THEN
	2706	disturbance_level_ind_t = k
	2707	EXIT
	2708	ENDIF
	2709	ENDDO
	2710	ENDIF
	2711
	2712	!
	2713	!-- Check again whether the levels determined this way are ok.
	2714	!-- Error may occur at automatic determination and too few grid points in
	2715	!-- z-direction.
	2716	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	2717	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	2718	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	2719	disturbance_level_b
	2720	CALL handle_palm_message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	2721	ENDIF
	2722
	2723	!
	2724	!-- Determine the horizontal index range for random perturbations.
	2725	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2726	!-- near the inflow and the perturbation area is further limited to ...(1)
	2727	!-- after the initial phase of the flow.
	2728	dist_nxl = 0; dist_nxr = nx
	2729	dist_nys = 0; dist_nyn = ny
	2730	IF ( bc_lr /= 'cyclic' ) THEN
	2731	IF ( inflow_disturbance_begin == -1 ) THEN
	2732	inflow_disturbance_begin = MIN( 10, nx/2 )
	2733	ENDIF
	2734	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2735	THEN
[215]	2736	message_string = 'inflow_disturbance_begin out of range'
	2737	CALL handle_palm_message( 'check_parameters', 'PA0131', 1, 2, 0, 6, &
	2738	0 )
[1]	2739	ENDIF
	2740	IF ( inflow_disturbance_end == -1 ) THEN
	2741	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2742	ENDIF
	2743	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2744	THEN
[215]	2745	message_string = 'inflow_disturbance_end out of range'
	2746	CALL handle_palm_message( 'check_parameters', 'PA0132', 1, 2, 0, 6, &
	2747	0 )
[1]	2748	ENDIF
	2749	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2750	IF ( inflow_disturbance_begin == -1 ) THEN
	2751	inflow_disturbance_begin = MIN( 10, ny/2 )
	2752	ENDIF
	2753	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2754	THEN
[215]	2755	message_string = 'inflow_disturbance_begin out of range'
	2756	CALL handle_palm_message( 'check_parameters', 'PA0131', 1, 2, 0, 6, &
	2757	0 )
[1]	2758	ENDIF
	2759	IF ( inflow_disturbance_end == -1 ) THEN
	2760	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2761	ENDIF
	2762	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2763	THEN
[215]	2764	message_string = 'inflow_disturbance_end out of range'
	2765	CALL handle_palm_message( 'check_parameters', 'PA0132', 1, 2, 0, 6, &
	2766	0 )
[1]	2767	ENDIF
	2768	ENDIF
	2769
[73]	2770	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2771	dist_nxr = nx - inflow_disturbance_begin
	2772	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2773	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2774	dist_nxl = inflow_disturbance_begin
	2775	dist_nxr(1) = inflow_disturbance_end
[73]	2776	ENDIF
	2777	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2778	dist_nyn = ny - inflow_disturbance_begin
	2779	dist_nys(1) = ny - inflow_disturbance_end
[73]	2780	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2781	dist_nys = inflow_disturbance_begin
	2782	dist_nyn(1) = inflow_disturbance_end
	2783	ENDIF
	2784
	2785	!
[151]	2786	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2787	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2788	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
[215]	2789	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	2790	'condition at the inflow boundary'
	2791	CALL handle_palm_message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	2792	ENDIF
	2793
	2794	!
	2795	!-- In case of turbulent inflow calculate the index of the recycling plane
	2796	IF ( turbulent_inflow ) THEN
	2797	IF ( recycling_width == 9999999.9 ) THEN
	2798	!
	2799	!-- Set the default value for the width of the recycling domain
	2800	recycling_width = 0.1 * nx * dx
	2801	ELSE
	2802	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	2803	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	2804	' ', recycling_width
	2805	CALL handle_palm_message( 'check_parameters', 'PA0134', 1, 2, 0, &
	2806	6, 0 )
[151]	2807	ENDIF
	2808	ENDIF
	2809	!
	2810	!-- Calculate the index
	2811	recycling_plane = recycling_width / dx
	2812	ENDIF
	2813
	2814	!
[1]	2815	!-- Check random generator
	2816	IF ( random_generator /= 'system-specific' .AND. &
	2817	random_generator /= 'numerical-recipes' ) THEN
[215]	2818	message_string = 'unknown random generator: random_generator = "' // &
	2819	TRIM( random_generator ) // '"'
	2820	CALL handle_palm_message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	2821	ENDIF
	2822
	2823	!
	2824	!-- Determine damping level index for 1D model
	2825	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	2826	IF ( damp_level_1d == -1.0 ) THEN
	2827	damp_level_1d = zu(nzt+1)
	2828	damp_level_ind_1d = nzt + 1
	2829	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	2830	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	2831	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
	2832	CALL handle_palm_message( 'check_parameters', 'PA0136', 1, 2, 0, 6, &
	2833	0 )
[1]	2834	ELSE
	2835	DO k = 1, nzt+1
	2836	IF ( damp_level_1d <= zu(k) ) THEN
	2837	damp_level_ind_1d = k
	2838	EXIT
	2839	ENDIF
	2840	ENDDO
	2841	ENDIF
	2842	ENDIF
[215]	2843
[1]	2844	!
	2845	!-- Check some other 1d-model parameters
	2846	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	2847	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	2848	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	2849	'" is unknown'
	2850	CALL handle_palm_message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	2851	ENDIF
	2852	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	2853	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	2854	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	2855	'" is unknown'
	2856	CALL handle_palm_message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	2857	ENDIF
	2858
	2859	!
	2860	!-- Set time for the next user defined restart (time_restart is the
	2861	!-- internal parameter for steering restart events)
	2862	IF ( restart_time /= 9999999.9 ) THEN
	2863	IF ( restart_time > simulated_time ) time_restart = restart_time
	2864	ELSE
	2865	!
	2866	!-- In case of a restart run, set internal parameter to default (no restart)
	2867	!-- if the NAMELIST-parameter restart_time is omitted
	2868	time_restart = 9999999.9
	2869	ENDIF
	2870
	2871	!
	2872	!-- Set default value of the time needed to terminate a model run
	2873	IF ( termination_time_needed == -1.0 ) THEN
	2874	IF ( host(1:3) == 'ibm' ) THEN
	2875	termination_time_needed = 300.0
	2876	ELSE
	2877	termination_time_needed = 35.0
	2878	ENDIF
	2879	ENDIF
	2880
	2881	!
	2882	!-- Check the time needed to terminate a model run
	2883	IF ( host(1:3) == 't3e' ) THEN
	2884	!
	2885	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	2886	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	2887	IF ( termination_time_needed <= 30.0 ) THEN
[215]	2888	WRITE( message_string, * ) 'termination_time_needed = ', &
	2889	termination_time_needed, ' must be > 30.0 on host "', &
	2890	TRIM( host ), '"'
	2891	CALL handle_palm_message( 'check_parameters', 'PA0139', 1, 2, 0, 6, &
	2892	0 )
[1]	2893	ENDIF
	2894	ELSEIF ( host(1:3) == 'ibm' ) THEN
	2895	!
	2896	!-- On IBM-regatta machines the time should be at least 300 seconds,
	2897	!-- because the job time consumed before executing palm (for compiling,
	2898	!-- copying of files, etc.) has to be regarded
	2899	IF ( termination_time_needed < 300.0 ) THEN
[215]	2900	WRITE( message_string, * ) 'termination_time_needed = ', &
	2901	termination_time_needed, ' should be >= 300.0 on host "', &
	2902	TRIM( host ), '"'
	2903	CALL handle_palm_message( 'check_parameters', 'PA0140', 1, 2, 0, 6, &
	2904	0 )
[1]	2905	ENDIF
	2906	ENDIF
	2907
[217]	2908	!
	2909	!-- Check &userpar parameters
	2910	CALL user_check_parameters
[1]	2911
[217]	2912
[1]	2913	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |