Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 203

Last change on this file since 203 was 198, checked in by raasch, 16 years ago
file headers updated for the next release 3.5
Property svn:keywords set to `Id`
File size: 111.8 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[198]	6	!
	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: check_parameters.f90 198 2008-09-17 08:55:28Z raasch $
	11	!
	12	! 197 2008-09-16 15:29:03Z raasch
[177]	13	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	14	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	15	!
	16	! Strict grid matching along z is not needed for mg-solver.
[153]	17	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	18	! Case of reading data for recycling included in initializing_actions,
[197]	19	! check of turbulent_inflow and calculation of recycling_plane.
	20	! q*2 profile added
[139]	21	!
	22	! 138 2007-11-28 10:03:58Z letzel
[138]	23	! Plant canopy added
[132]	24	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	25	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	26	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	27	!
	28	! 109 2007-08-28 15:26:47Z letzel
[102]	29	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	30	! conditions for temperature and fluxes) in case of coupled runs.
	31	! +profiles for wp and w"e
[104]	32	! Bugfix: Error message concerning output of particle concentration (pc)
	33	! modified
[108]	34	! More checks and more default values for coupled runs
	35	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	36	! cloud_physics = .T.)
	37	! Rayleigh damping for ocean fixed.
[109]	38	! Check and, if necessary, set default value for dt_coupling
[98]	39	!
	40	! 97 2007-06-21 08:23:15Z raasch
[97]	41	! Initial salinity profile is calculated, salinity boundary conditions are
	42	! checked,
[94]	43	! z_max_do1d is checked only in case of ocean = .f.,
[97]	44	! +initial temperature and geostrophic velocity profiles for the ocean version,
	45	! use_pt_reference renamed use_reference
[77]	46	!
[90]	47	! 89 2007-05-25 12:08:31Z raasch
	48	! Check for user-defined profiles
	49	!
[77]	50	! 75 2007-03-22 09:54:05Z raasch
[51]	51	! "by_user" allowed as initializing action, -data_output_ts,
[63]	52	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	53	! and pt_reference are checked, moisture renamed humidity,
[72]	54	! output of precipitation amount/rate and roughnes length + check
[73]	55	! possible negative humidities are avoided in initial profile,
[75]	56	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	57	! revision added to run_description_header
[1]	58	!
[39]	59	! 20 2007-02-26 00:12:32Z raasch
	60	! Temperature and humidity gradients at top are now calculated for nzt+1,
	61	! top_heatflux and respective boundary condition bc_pt_t is checked
	62	!
[3]	63	! RCS Log replace by Id keyword, revision history cleaned up
	64	!
[1]	65	! Revision 1.61 2006/08/04 14:20:25 raasch
	66	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	67	! use_upstream_for_tke, default value for dt_dopts,
	68	! generation of file header moved from routines palm and header to here
	69	!
	70	! Revision 1.1 1997/08/26 06:29:23 raasch
	71	! Initial revision
	72	!
	73	!
	74	! Description:
	75	! ------------
	76	! Check control parameters and deduce further quantities.
	77	!------------------------------------------------------------------------------!
	78
	79	USE arrays_3d
	80	USE constants
	81	USE control_parameters
	82	USE grid_variables
	83	USE indices
	84	USE model_1d
	85	USE netcdf_control
	86	USE particle_attributes
	87	USE pegrid
	88	USE profil_parameter
	89	USE statistics
	90	USE transpose_indices
	91
	92	IMPLICIT NONE
	93
	94	CHARACTER (LEN=1) :: sq
	95	CHARACTER (LEN=6) :: var
	96	CHARACTER (LEN=7) :: unit
	97	CHARACTER (LEN=8) :: date
	98	CHARACTER (LEN=10) :: time
[102]	99	CHARACTER (LEN=40) :: coupling_string
[1]	100	CHARACTER (LEN=100) :: action
	101
[108]	102	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	103	position, prec
[1]	104	LOGICAL :: found, ldum
[108]	105	REAL :: gradient, maxn, maxp, remote = 0.0
[1]	106
	107	!
	108	!-- Warning, if host is not set
	109	IF ( host(1:1) == ' ' ) THEN
	110	IF ( myid == 0 ) THEN
	111	PRINT*, '+++ WARNING: check_parameters:'
	112	PRINT*, ' "host" is not set. Please check that environment', &
	113	' variable "localhost"'
	114	PRINT*, ' is set before running PALM'
	115	ENDIF
	116	ENDIF
	117
	118	!
[102]	119	!-- Check the coupling mode
	120	IF ( coupling_mode /= 'uncoupled' .AND. &
	121	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	122	coupling_mode /= 'ocean_to_atmosphere' ) THEN
	123	IF ( myid == 0 ) THEN
	124	PRINT*, '+++ check_parameters:'
	125	PRINT*, ' illegal coupling mode: ', TRIM( coupling_mode )
	126	ENDIF
	127	CALL local_stop
	128	ENDIF
	129
	130	!
[108]	131	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	132	IF ( coupling_mode /= 'uncoupled' ) THEN
	133	IF ( dt_coupling == 9999999.9 ) THEN
	134	IF ( myid == 0 ) THEN
	135	PRINT*, '+++ check_parameters:'
	136	PRINT*, ' dt_coupling is not set but required for coupling ', &
	137	'mode: ', TRIM( coupling_mode )
	138	ENDIF
	139	CALL local_stop
	140	ENDIF
	141	#if defined( __parallel ) && defined( __mpi2 )
	142	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, myid, 11, comm_inter, ierr )
	143	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 11, comm_inter, status, ierr )
	144	IF ( dt_coupling /= remote ) THEN
	145	IF ( myid == 0 ) THEN
	146	PRINT*, '+++ check_parameters:'
	147	PRINT*, ' TRIM( coupling_mode ): dt_coupling = ', dt_coupling
	148	PRINT*, ' is not equal to dt_coupling_remote = ', remote
	149	ENDIF
	150	CALL local_stop
	151	ENDIF
[109]	152	IF ( dt_coupling <= 0.0 ) THEN
	153	CALL MPI_SEND( dt_max, 1, MPI_REAL, myid, 19, comm_inter, ierr )
	154	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 19, comm_inter, status, &
	155	ierr )
	156	dt_coupling = MAX( dt_max, remote )
	157	IF ( myid == 0 ) THEN
	158	PRINT*, '+++ check_parameters:'
	159	PRINT*, ' TRIM( coupling_mode ): dt_coupling <= 0.0'
	160	PRINT*, ' is not allowed and is reset to MAX(dt_max(A,O)) = ', &
	161	dt_coupling
	162	ENDIF
	163	ENDIF
[108]	164	CALL MPI_SEND( restart_time, 1, MPI_REAL, myid, 12, comm_inter, ierr )
	165	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 12, comm_inter, status, ierr )
	166	IF ( restart_time /= remote ) THEN
	167	IF ( myid == 0 ) THEN
	168	PRINT*, '+++ check_parameters:'
	169	PRINT*, ' TRIM( coupling_mode ): restart_time = ', restart_time
	170	PRINT*, ' is not equal to restart_time_remote = ', remote
	171	ENDIF
	172	CALL local_stop
	173	ENDIF
	174	CALL MPI_SEND( dt_restart, 1, MPI_REAL, myid, 13, comm_inter, ierr )
	175	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 13, comm_inter, status, ierr )
	176	IF ( dt_restart /= remote ) THEN
	177	IF ( myid == 0 ) THEN
	178	PRINT*, '+++ check_parameters:'
	179	PRINT*, ' TRIM( coupling_mode ): dt_restart = ', dt_restart
	180	PRINT*, ' is not equal to dt_restart_remote = ', remote
	181	ENDIF
	182	CALL local_stop
	183	ENDIF
	184	CALL MPI_SEND( end_time, 1, MPI_REAL, myid, 14, comm_inter, ierr )
	185	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 14, comm_inter, status, ierr )
	186	IF ( end_time /= remote ) THEN
	187	IF ( myid == 0 ) THEN
	188	PRINT*, '+++ check_parameters:'
	189	PRINT*, ' TRIM( coupling_mode ): end_time = ', end_time
	190	PRINT*, ' is not equal to end_time_remote = ', remote
	191	ENDIF
	192	CALL local_stop
	193	ENDIF
	194	CALL MPI_SEND( dx, 1, MPI_REAL, myid, 15, comm_inter, ierr )
	195	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 15, comm_inter, status, ierr )
	196	IF ( dx /= remote ) THEN
	197	IF ( myid == 0 ) THEN
	198	PRINT*, '+++ check_parameters:'
	199	PRINT*, ' TRIM( coupling_mode ): dx = ', dx
	200	PRINT*, ' is not equal to dx_remote = ', remote
	201	ENDIF
	202	CALL local_stop
	203	ENDIF
	204	CALL MPI_SEND( dy, 1, MPI_REAL, myid, 16, comm_inter, ierr )
	205	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 16, comm_inter, status, ierr )
	206	IF ( dy /= remote ) THEN
	207	IF ( myid == 0 ) THEN
	208	PRINT*, '+++ check_parameters:'
	209	PRINT*, ' TRIM( coupling_mode ): dy = ', dy
	210	PRINT*, ' is not equal to dy_remote = ', remote
	211	ENDIF
	212	CALL local_stop
	213	ENDIF
	214	CALL MPI_SEND( nx, 1, MPI_INTEGER, myid, 17, comm_inter, ierr )
	215	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 17, comm_inter, status, &
	216	ierr )
	217	IF ( nx /= iremote ) THEN
	218	IF ( myid == 0 ) THEN
	219	PRINT*, '+++ check_parameters:'
	220	PRINT*, ' TRIM( coupling_mode ): nx = ', nx
	221	PRINT*, ' is not equal to nx_remote = ', iremote
	222	ENDIF
	223	CALL local_stop
	224	ENDIF
	225	CALL MPI_SEND( ny, 1, MPI_INTEGER, myid, 18, comm_inter, ierr )
	226	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 18, comm_inter, status, &
	227	ierr )
	228	IF ( ny /= iremote ) THEN
	229	IF ( myid == 0 ) THEN
	230	PRINT*, '+++ check_parameters:'
	231	PRINT*, ' TRIM( coupling_mode ): ny = ', ny
	232	PRINT*, ' is not equal to ny_remote = ', iremote
	233	ENDIF
	234	CALL local_stop
	235	ENDIF
	236	#endif
	237	ENDIF
	238
	239	#if defined( __parallel ) && defined( __mpi2 )
	240	!
	241	!-- Exchange via intercommunicator
	242	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	243	CALL MPI_SEND( humidity, &
	244	1, MPI_LOGICAL, myid, 19, comm_inter, ierr )
	245	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	246	CALL MPI_RECV( humidity_remote, &
	247	1, MPI_LOGICAL, myid, 19, comm_inter, status, ierr )
	248	ENDIF
	249	#endif
	250
	251
	252	!
[1]	253	!-- Generate the file header which is used as a header for most of PALM's
	254	!-- output files
	255	CALL DATE_AND_TIME( date, time )
	256	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	257	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	258	IF ( coupling_mode == 'uncoupled' ) THEN
	259	coupling_string = ''
	260	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	261	coupling_string = ' coupled (atmosphere)'
	262	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	263	coupling_string = ' coupled (ocean)'
	264	ENDIF
[1]	265
[102]	266	WRITE ( run_description_header, &
	267	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	268	TRIM( version ), TRIM( revision ), 'run: ', &
	269	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	270	'host: ', TRIM( host ), run_date, run_time
[1]	271
	272	!
[63]	273	!-- Check the general loop optimization method
	274	IF ( loop_optimization == 'default' ) THEN
	275	IF ( host(1:3) == 'nec' ) THEN
	276	loop_optimization = 'vector'
	277	ELSE
	278	loop_optimization = 'cache'
	279	ENDIF
	280	ENDIF
	281	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	282	.AND. loop_optimization /= 'vector' ) THEN
	283	IF ( myid == 0 ) THEN
	284	PRINT*, '+++ check_parameters:'
	285	PRINT*, ' illegal value given for loop_optimization: ', &
	286	TRIM( loop_optimization )
	287	ENDIF
	288	CALL local_stop
	289	ENDIF
	290
	291	!
[1]	292	!-- Check topography setting (check for illegal parameter combinations)
	293	IF ( topography /= 'flat' ) THEN
	294	action = ' '
	295	IF ( scalar_advec /= 'pw-scheme' ) THEN
	296	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	297	ENDIF
	298	IF ( momentum_advec /= 'pw-scheme' ) THEN
	299	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	300	ENDIF
[51]	301	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	302	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	303	ENDIF
[114]	304	IF ( psolver == 'sor' ) THEN
[1]	305	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	306	ENDIF
	307	IF ( sloping_surface ) THEN
	308	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	309	ENDIF
	310	IF ( galilei_transformation ) THEN
	311	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	312	ENDIF
	313	IF ( cloud_physics ) THEN
	314	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	315	ENDIF
	316	IF ( cloud_droplets ) THEN
	317	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	318	ENDIF
[75]	319	IF ( humidity ) THEN
	320	WRITE( action, '(A)' ) 'humidity = .TRUE.'
[1]	321	ENDIF
	322	IF ( .NOT. prandtl_layer ) THEN
	323	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	324	ENDIF
	325	IF ( action /= ' ' ) THEN
	326	IF ( myid == 0 ) THEN
	327	PRINT*, '+++ check_parameters:'
	328	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
	329	ENDIF
	330	CALL local_stop
	331	ENDIF
	332	ENDIF
[94]	333
[1]	334	!
[94]	335	!-- Check ocean setting
	336	IF ( ocean ) THEN
	337	action = ' '
	338	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	339	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	340	ENDIF
[97]	341	IF ( momentum_advec == 'ups-scheme' ) THEN
	342	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	343	ENDIF
[94]	344	IF ( action /= ' ' ) THEN
	345	IF ( myid == 0 ) THEN
	346	PRINT*, '+++ check_parameters:'
	347	PRINT*, ' ocean = .T. does not allow ', TRIM( action )
	348	ENDIF
	349	CALL local_stop
	350	ENDIF
	351	ENDIF
	352
	353	!
[1]	354	!-- Check whether there are any illegal values
	355	!-- Pressure solver:
	356	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	357	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
	358	IF ( myid == 0 ) THEN
	359	PRINT*, '+++ check_parameters:'
	360	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
	361	psolver
	362	ENDIF
	363	CALL local_stop
	364	ENDIF
	365
	366	#if defined( __parallel )
	367	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
	368	IF ( myid == 0 ) THEN
	369	PRINT*, '+++ check_parameters:'
	370	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
	371	'1d domain-decomposition along x'
	372	PRINT*, ' please do not set npey/=1 in the parameter file'
	373	ENDIF
	374	CALL local_stop
	375	ENDIF
[181]	376	IF ( psolver == 'poisfft_hybrid' .AND. &
	377	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
	378	psolver == 'multigrid' .AND. &
	379	( nxra > nxr .OR. nyna > nyn ) ) THEN
[1]	380	IF ( myid == 0 ) THEN
	381	PRINT*, '+++ check_parameters:'
	382	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
	383	'subdomains with unequal size'
	384	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
	385	' file'
	386	ENDIF
	387	CALL local_stop
	388	ENDIF
	389	#else
	390	IF ( psolver == 'poisfft_hybrid' ) THEN
	391	IF ( myid == 0 ) THEN
	392	PRINT*, '+++ check_parameters:'
	393	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
	394	'parallel environment'
	395	ENDIF
	396	CALL local_stop
	397	ENDIF
	398	#endif
	399
	400	IF ( psolver == 'multigrid' ) THEN
	401	IF ( cycle_mg == 'w' ) THEN
	402	gamma_mg = 2
	403	ELSEIF ( cycle_mg == 'v' ) THEN
	404	gamma_mg = 1
	405	ELSE
	406	IF ( myid == 0 ) THEN
	407	PRINT*, '+++ check_parameters:'
	408	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
	409	ENDIF
	410	CALL local_stop
	411	ENDIF
	412	ENDIF
	413
	414	IF ( fft_method /= 'singleton-algorithm' .AND. &
	415	fft_method /= 'temperton-algorithm' .AND. &
	416	fft_method /= 'system-specific' ) THEN
	417	IF ( myid == 0 ) THEN
	418	PRINT*, '+++ check_parameters:'
	419	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
	420	ENDIF
	421	CALL local_stop
	422	ENDIF
	423
	424	!
	425	!-- Advection schemes:
	426	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	427	THEN
	428	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
	429	'scheme: momentum_advec=', momentum_advec
	430	CALL local_stop
	431	ENDIF
	432	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	433	.AND. timestep_scheme /= 'euler' ) THEN
	434	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
	435	momentum_advec, ' is not allowed with ', &
	436	'timestep_scheme=', timestep_scheme
	437	CALL local_stop
	438	ENDIF
	439
	440	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	441	scalar_advec /= 'ups-scheme' ) THEN
	442	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
	443	'scheme: scalar_advec=', scalar_advec
	444	CALL local_stop
	445	ENDIF
	446
	447	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	448	use_upstream_for_tke = .TRUE.
	449	IF ( myid == 0 ) THEN
	450	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
	451	'.TRUE. because use_sgs_for_particles = .TRUE.'
	452	ENDIF
	453	ENDIF
	454
	455	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
	456	IF ( myid == 0 ) THEN
	457	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
	458	'not allowed with timestep_scheme=', timestep_scheme
	459	ENDIF
	460	CALL local_stop
	461	ENDIF
	462
	463	!
	464	!-- Timestep schemes:
	465	SELECT CASE ( TRIM( timestep_scheme ) )
	466
	467	CASE ( 'euler' )
	468	intermediate_timestep_count_max = 1
	469	asselin_filter_factor = 0.0
	470
	471	CASE ( 'leapfrog', 'leapfrog+euler' )
	472	intermediate_timestep_count_max = 1
	473
	474	CASE ( 'runge-kutta-2' )
	475	intermediate_timestep_count_max = 2
	476	asselin_filter_factor = 0.0
	477
	478	CASE ( 'runge-kutta-3' )
	479	intermediate_timestep_count_max = 3
	480	asselin_filter_factor = 0.0
	481
	482	CASE DEFAULT
	483	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
	484	'scheme: timestep_scheme=', timestep_scheme
	485	CALL local_stop
	486
	487	END SELECT
	488
[63]	489	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	490	THEN
	491	IF ( myid == 0 ) THEN
	492	PRINT*, '+++ check_parameters: scalar advection scheme "', &
	493	TRIM( scalar_advec ), '"'
	494	PRINT*, ' does not work with timestep_scheme "', &
	495	TRIM( timestep_scheme ), '"'
	496	ENDIF
	497	CALL local_stop
	498	ENDIF
	499
	500	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	501	THEN
	502	IF ( myid == 0 ) THEN
	503	PRINT*, '+++ check_parameters: momentum advection scheme "', &
	504	TRIM( momentum_advec ), '"'
	505	PRINT*, ' does not work with timestep_scheme "', &
	506	TRIM( timestep_scheme ), '"'
	507	ENDIF
	508	CALL local_stop
	509	ENDIF
	510
	511
	512	IF ( initializing_actions == ' ' ) THEN
	513	IF ( myid == 0 ) THEN
	514	PRINT*, '+++ check parameters:'
	515	PRINT*, ' no value found for initializing_actions'
	516	ENDIF
	517	CALL local_stop
	518	ENDIF
	519
[147]	520	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	521	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
[1]	522	!
	523	!-- No model continuation run; several initialising actions are possible
	524	action = initializing_actions
	525	DO WHILE ( TRIM( action ) /= '' )
	526	position = INDEX( action, ' ' )
	527	SELECT CASE ( action(1:position-1) )
	528
	529	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	530	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	531	action = action(position+1:)
	532
	533	CASE DEFAULT
	534	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
	535	'ng_action unkown or not allowed: action = "', &
	536	TRIM(action), '"'
	537	CALL local_stop
	538
	539	END SELECT
	540	ENDDO
	541	ENDIF
	542	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	543	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	544	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
	545	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
	546	' allowed simultaneously'
	547	CALL local_stop
	548	ENDIF
[46]	549	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	550	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
	551	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
	552	'"set_constant_profiles" and "by_user" are not', &
	553	' allowed simultaneously'
	554	CALL local_stop
	555	ENDIF
	556	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	557	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	558	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
	559	'"by_user" and "set_1d-model_profiles" are not', &
	560	' allowed simultaneously'
	561	CALL local_stop
	562	ENDIF
[1]	563
[75]	564	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[72]	565	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
	566	cloud_physics, ' is not allowed with ', &
[75]	567	'humidity =', humidity
[1]	568	CALL local_stop
	569	ENDIF
	570
[72]	571	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
	572	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
	573	precipitation, ' is not allowed with ', &
	574	'cloud_physics =', cloud_physics
	575	CALL local_stop
	576	ENDIF
	577
[75]	578	IF ( humidity .AND. sloping_surface ) THEN
	579	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE', &
[1]	580	'and hang = TRUE are not', &
	581	' allowed simultaneously'
	582	CALL local_stop
	583	ENDIF
	584
[75]	585	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[1]	586	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
[75]	587	'is not implemented for humidity'
[1]	588	CALL local_stop
	589	ENDIF
	590
[75]	591	IF ( passive_scalar .AND. humidity ) THEN
	592	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE and', &
[1]	593	'passive_scalar = TRUE is not allowed ', &
	594	'simultaneously'
	595	CALL local_stop
	596	ENDIF
	597
	598	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
	599	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
	600	'is not implemented for passive_scalar'
	601	CALL local_stop
	602	ENDIF
	603
	604	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
	605	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
	606	TRIM( grid_matching ), &
	607	'" found for parameter grid_matching'
	608	CALL local_stop
	609	ENDIF
	610
[138]	611	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
	612	IF ( myid == 0 ) PRINT*, '+++ check_parameters: plant_canopy = TRUE', &
	613	'requires a non-zero drag_coefficient'
	614	CALL local_stop
	615	ENDIF
	616
[1]	617	!
	618	!-- In case of no model continuation run, check initialising parameters and
	619	!-- deduce further quantities
	620	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	621
	622	!
	623	!-- Initial profiles for 1D and 3D model, respectively
	624	u_init = ug_surface
	625	v_init = vg_surface
	626	pt_init = pt_surface
[94]	627	IF ( humidity ) q_init = q_surface
	628	IF ( ocean ) sa_init = sa_surface
	629	IF ( passive_scalar ) q_init = s_surface
[138]	630	IF ( plant_canopy ) lad = 0.0
[1]	631
	632	!
	633	!--
	634	!-- If required, compute initial profile of the geostrophic wind
	635	!-- (component ug)
	636	i = 1
	637	gradient = 0.0
[97]	638
	639	IF ( .NOT. ocean ) THEN
	640
	641	ug_vertical_gradient_level_ind(1) = 0
	642	ug(0) = ug_surface
	643	DO k = 1, nzt+1
[177]	644	IF ( i < 11 ) THEN
	645	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	646	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	647	gradient = ug_vertical_gradient(i) / 100.0
	648	ug_vertical_gradient_level_ind(i) = k - 1
	649	i = i + 1
[1]	650	ENDIF
[177]	651	ENDIF
[97]	652	IF ( gradient /= 0.0 ) THEN
	653	IF ( k /= 1 ) THEN
	654	ug(k) = ug(k-1) + dzu(k) * gradient
	655	ELSE
	656	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	657	ENDIF
[1]	658	ELSE
[97]	659	ug(k) = ug(k-1)
[1]	660	ENDIF
[97]	661	ENDDO
[1]	662
[97]	663	ELSE
	664
	665	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	666	ug(nzt+1) = ug_surface
[97]	667	DO k = nzt, 0, -1
[177]	668	IF ( i < 11 ) THEN
	669	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	670	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	671	gradient = ug_vertical_gradient(i) / 100.0
	672	ug_vertical_gradient_level_ind(i) = k + 1
	673	i = i + 1
[97]	674	ENDIF
	675	ENDIF
	676	IF ( gradient /= 0.0 ) THEN
	677	IF ( k /= nzt ) THEN
	678	ug(k) = ug(k+1) - dzu(k+1) * gradient
	679	ELSE
	680	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	681	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	682	ENDIF
	683	ELSE
	684	ug(k) = ug(k+1)
	685	ENDIF
	686	ENDDO
	687
	688	ENDIF
	689
[1]	690	u_init = ug
	691
	692	!
	693	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	694	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	695	ug_vertical_gradient_level(1) = 0.0
	696	ENDIF
	697
	698	!
	699	!--
	700	!-- If required, compute initial profile of the geostrophic wind
	701	!-- (component vg)
	702	i = 1
	703	gradient = 0.0
[97]	704
	705	IF ( .NOT. ocean ) THEN
	706
	707	vg_vertical_gradient_level_ind(1) = 0
	708	vg(0) = vg_surface
	709	DO k = 1, nzt+1
[177]	710	IF ( i < 11 ) THEN
	711	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	712	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	713	gradient = vg_vertical_gradient(i) / 100.0
	714	vg_vertical_gradient_level_ind(i) = k - 1
	715	i = i + 1
[1]	716	ENDIF
	717	ENDIF
[97]	718	IF ( gradient /= 0.0 ) THEN
	719	IF ( k /= 1 ) THEN
	720	vg(k) = vg(k-1) + dzu(k) * gradient
	721	ELSE
	722	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	723	ENDIF
[1]	724	ELSE
[97]	725	vg(k) = vg(k-1)
[1]	726	ENDIF
[97]	727	ENDDO
[1]	728
[97]	729	ELSE
	730
[121]	731	vg_vertical_gradient_level_ind(1) = nzt+1
	732	vg(nzt+1) = vg_surface
[97]	733	DO k = nzt, 0, -1
[177]	734	IF ( i < 11 ) THEN
	735	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	736	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	737	gradient = vg_vertical_gradient(i) / 100.0
	738	vg_vertical_gradient_level_ind(i) = k + 1
	739	i = i + 1
[97]	740	ENDIF
	741	ENDIF
	742	IF ( gradient /= 0.0 ) THEN
	743	IF ( k /= nzt ) THEN
	744	vg(k) = vg(k+1) - dzu(k+1) * gradient
	745	ELSE
	746	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	747	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	748	ENDIF
	749	ELSE
	750	vg(k) = vg(k+1)
	751	ENDIF
	752	ENDDO
	753
	754	ENDIF
	755
[1]	756	v_init = vg
	757
	758	!
	759	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	760	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	761	vg_vertical_gradient_level(1) = 0.0
	762	ENDIF
	763
	764	!
[94]	765	!-- Compute initial temperature profile using the given temperature gradients
[1]	766	i = 1
	767	gradient = 0.0
[94]	768
	769	IF ( .NOT. ocean ) THEN
	770
	771	pt_vertical_gradient_level_ind(1) = 0
	772	DO k = 1, nzt+1
[177]	773	IF ( i < 11 ) THEN
	774	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	775	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	776	gradient = pt_vertical_gradient(i) / 100.0
	777	pt_vertical_gradient_level_ind(i) = k - 1
	778	i = i + 1
[1]	779	ENDIF
	780	ENDIF
[94]	781	IF ( gradient /= 0.0 ) THEN
	782	IF ( k /= 1 ) THEN
	783	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	784	ELSE
	785	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	786	ENDIF
[1]	787	ELSE
[94]	788	pt_init(k) = pt_init(k-1)
[1]	789	ENDIF
[94]	790	ENDDO
[1]	791
[94]	792	ELSE
	793
	794	pt_vertical_gradient_level_ind(1) = nzt+1
	795	DO k = nzt, 0, -1
[177]	796	IF ( i < 11 ) THEN
	797	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	798	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	799	gradient = pt_vertical_gradient(i) / 100.0
	800	pt_vertical_gradient_level_ind(i) = k + 1
	801	i = i + 1
[94]	802	ENDIF
	803	ENDIF
	804	IF ( gradient /= 0.0 ) THEN
	805	IF ( k /= nzt ) THEN
	806	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	807	ELSE
	808	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	809	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	810	ENDIF
	811	ELSE
	812	pt_init(k) = pt_init(k+1)
	813	ENDIF
	814	ENDDO
	815
	816	ENDIF
	817
[1]	818	!
	819	!-- In case of no given temperature gradients, choose gradient of neutral
	820	!-- stratification
[94]	821	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	822	pt_vertical_gradient_level(1) = 0.0
	823	ENDIF
	824
	825	!
[94]	826	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	827	!-- boundary condition
[19]	828	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	829
	830	!
	831	!-- If required, compute initial humidity or scalar profile using the given
	832	!-- humidity/scalar gradient. In case of scalar transport, initially store
	833	!-- values of the scalar parameters on humidity parameters
	834	IF ( passive_scalar ) THEN
	835	bc_q_b = bc_s_b
	836	bc_q_t = bc_s_t
	837	q_surface = s_surface
	838	q_surface_initial_change = s_surface_initial_change
	839	q_vertical_gradient = s_vertical_gradient
	840	q_vertical_gradient_level = s_vertical_gradient_level
	841	surface_waterflux = surface_scalarflux
	842	ENDIF
	843
[75]	844	IF ( humidity .OR. passive_scalar ) THEN
[1]	845
	846	i = 1
	847	gradient = 0.0
	848	q_vertical_gradient_level_ind(1) = 0
	849	DO k = 1, nzt+1
[177]	850	IF ( i < 11 ) THEN
	851	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	852	q_vertical_gradient_level(i) >= 0.0 ) THEN
	853	gradient = q_vertical_gradient(i) / 100.0
	854	q_vertical_gradient_level_ind(i) = k - 1
	855	i = i + 1
[1]	856	ENDIF
	857	ENDIF
	858	IF ( gradient /= 0.0 ) THEN
	859	IF ( k /= 1 ) THEN
	860	q_init(k) = q_init(k-1) + dzu(k) * gradient
	861	ELSE
	862	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	863	ENDIF
	864	ELSE
	865	q_init(k) = q_init(k-1)
	866	ENDIF
[72]	867	!
	868	!-- Avoid negative humidities
	869	IF ( q_init(k) < 0.0 ) THEN
	870	q_init(k) = 0.0
	871	ENDIF
[1]	872	ENDDO
	873
	874	!
	875	!-- In case of no given humidity gradients, choose zero gradient
	876	!-- conditions
	877	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	878	q_vertical_gradient_level(1) = 0.0
	879	ENDIF
	880
	881	!
	882	!-- Store humidity gradient at the top boundary for possile Neumann
	883	!-- boundary condition
[19]	884	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	885
	886	ENDIF
	887
[94]	888	!
	889	!-- If required, compute initial salinity profile using the given salinity
	890	!-- gradients
	891	IF ( ocean ) THEN
	892
	893	i = 1
	894	gradient = 0.0
	895
	896	sa_vertical_gradient_level_ind(1) = nzt+1
	897	DO k = nzt, 0, -1
[177]	898	IF ( i < 11 ) THEN
	899	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	900	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	901	gradient = sa_vertical_gradient(i) / 100.0
	902	sa_vertical_gradient_level_ind(i) = k + 1
	903	i = i + 1
[94]	904	ENDIF
	905	ENDIF
	906	IF ( gradient /= 0.0 ) THEN
	907	IF ( k /= nzt ) THEN
	908	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	909	ELSE
	910	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	911	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	912	ENDIF
	913	ELSE
	914	sa_init(k) = sa_init(k+1)
	915	ENDIF
	916	ENDDO
	917
	918	ENDIF
	919
[138]	920	!
	921	!-- If required compute the profile of leaf area density used in the plant canopy model
	922	IF ( plant_canopy ) THEN
	923
	924	i = 1
	925	gradient = 0.0
[1]	926
[138]	927	IF ( .NOT. ocean ) THEN
[153]	928
	929	lad(0) = lad_surface
[138]	930
	931	lad_vertical_gradient_level_ind(1) = 0
	932	DO k = 1, pch_index
[177]	933	IF ( i < 11 ) THEN
	934	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	935	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	936	gradient = lad_vertical_gradient(i)
	937	lad_vertical_gradient_level_ind(i) = k - 1
	938	i = i + 1
[138]	939	ENDIF
	940	ENDIF
	941	IF ( gradient /= 0.0 ) THEN
	942	IF ( k /= 1 ) THEN
	943	lad(k) = lad(k-1) + dzu(k) * gradient
	944	ELSE
	945	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	946	ENDIF
	947	ELSE
	948	lad(k) = lad(k-1)
	949	ENDIF
	950	ENDDO
	951
	952	ENDIF
	953
[1]	954	!
[138]	955	!-- In case of no given leaf area density gradients, choose a vanishing gradient
	956	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	957	lad_vertical_gradient_level(1) = 0.0
	958	ENDIF
	959
	960	ENDIF
	961
	962	ENDIF
	963
	964	!
[1]	965	!-- Compute Coriolis parameter
	966	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	967	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	968
	969	!
[97]	970	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	971	!-- set the reference temperature equal to the surface temperature.
	972	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	973
	974	!
[97]	975	!-- Reference value has to be used in buoyancy terms
	976	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	977
	978	!
	979	!-- Sign of buoyancy/stability terms
	980	IF ( ocean ) atmos_ocean_sign = -1.0
	981
	982	!
[108]	983	!-- Ocean version must use flux boundary conditions at the top
	984	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
	985	IF ( myid == 0 ) PRINT*, '+++ check_parameters: use_top_fluxes ',&
	986	'must be .TRUE. in ocean version'
	987	CALL local_stop
	988	ENDIF
[97]	989
	990	!
[1]	991	!-- In case of a given slope, compute the relevant quantities
	992	IF ( alpha_surface /= 0.0 ) THEN
	993	IF ( ABS( alpha_surface ) > 90.0 ) THEN
	994	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
	995	'=', alpha_surface, ' ) must be < 90.0'
	996	CALL local_stop
	997	ENDIF
	998	sloping_surface = .TRUE.
	999	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1000	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1001	ENDIF
	1002
	1003	!
	1004	!-- Check time step and cfl_factor
	1005	IF ( dt /= -1.0 ) THEN
	1006	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
	1007	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
	1008	CALL local_stop
	1009	ENDIF
	1010	dt_3d = dt
	1011	dt_fixed = .TRUE.
	1012	ENDIF
	1013
	1014	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1015	IF ( cfl_factor == -1.0 ) THEN
	1016	IF ( momentum_advec == 'ups-scheme' .OR. &
	1017	scalar_advec == 'ups-scheme' ) THEN
	1018	cfl_factor = 0.8
	1019	ELSE
	1020	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1021	cfl_factor = 0.8
	1022	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1023	cfl_factor = 0.9
	1024	ELSE
	1025	cfl_factor = 0.1
	1026	ENDIF
	1027	ENDIF
	1028	ELSE
	1029	IF ( myid == 0 ) THEN
	1030	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
	1031	' out of range'
	1032	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
	1033	ENDIF
	1034	CALL local_stop
	1035	ENDIF
	1036	ENDIF
	1037
	1038	!
	1039	!-- Store simulated time at begin
	1040	simulated_time_at_begin = simulated_time
	1041
	1042	!
	1043	!-- Set wind speed in the Galilei-transformed system
	1044	IF ( galilei_transformation ) THEN
	1045	IF ( use_ug_for_galilei_tr .AND. &
	1046	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1047	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1048	u_gtrans = ug_surface
	1049	v_gtrans = vg_surface
	1050	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1051	ug_vertical_gradient_level(1) /= 0.0 ) THEN
	1052	IF ( myid == 0 ) THEN
	1053	PRINT*, '+++ check_parameters:'
	1054	PRINT*, ' baroclinicity (ug) not allowed'
	1055	PRINT*, ' simultaneously with galilei transformation'
	1056	ENDIF
	1057	CALL local_stop
	1058	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1059	vg_vertical_gradient_level(1) /= 0.0 ) THEN
	1060	IF ( myid == 0 ) THEN
	1061	PRINT*, '+++ check_parameters:'
	1062	PRINT*, ' baroclinicity (vg) not allowed'
	1063	PRINT*, ' simultaneously with galilei transformation'
	1064	ENDIF
	1065	CALL local_stop
	1066	ELSE
	1067	IF ( myid == 0 ) THEN
	1068	PRINT*, '+++ WARNING: check_parameters:'
	1069	PRINT*, ' variable translation speed used for galilei-tran' // &
	1070	'sformation, which'
	1071	PRINT*, ' may cause instabilities in stably stratified regions'
	1072	ENDIF
	1073	ENDIF
	1074	ENDIF
	1075
	1076	!
	1077	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1078	!-- fluxes have to be used in the diffusion-terms
	1079	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1080
	1081	!
	1082	!-- Check boundary conditions and set internal variables:
	1083	!-- Lateral boundary conditions
[73]	1084	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1085	bc_lr /= 'radiation/dirichlet' ) THEN
[1]	1086	IF ( myid == 0 ) THEN
	1087	PRINT*, '+++ check_parameters:'
	1088	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
	1089	ENDIF
	1090	CALL local_stop
	1091	ENDIF
[73]	1092	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1093	bc_ns /= 'radiation/dirichlet' ) THEN
[1]	1094	IF ( myid == 0 ) THEN
	1095	PRINT*, '+++ check_parameters:'
	1096	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
	1097	ENDIF
	1098	CALL local_stop
	1099	ENDIF
	1100
	1101	!
	1102	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1103	!-- Willimas advection scheme. Several schemes and tools do not work with
	1104	!-- non-cyclic boundary conditions.
	1105	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1106	IF ( psolver /= 'multigrid' ) THEN
	1107	IF ( myid == 0 ) THEN
	1108	PRINT*, '+++ check_parameters:'
	1109	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1110	' psolver = ', psolver
	1111	ENDIF
	1112	CALL local_stop
	1113	ENDIF
	1114	IF ( momentum_advec /= 'pw-scheme' ) THEN
	1115	IF ( myid == 0 ) THEN
	1116	PRINT*, '+++ check_parameters:'
	1117	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1118	' momentum_advec = ', momentum_advec
	1119	ENDIF
	1120	CALL local_stop
	1121	ENDIF
	1122	IF ( scalar_advec /= 'pw-scheme' ) THEN
	1123	IF ( myid == 0 ) THEN
	1124	PRINT*, '+++ check_parameters:'
	1125	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1126	' scalar_advec = ', scalar_advec
	1127	ENDIF
	1128	CALL local_stop
	1129	ENDIF
	1130	IF ( galilei_transformation ) THEN
	1131	IF ( myid == 0 ) THEN
	1132	PRINT*, '+++ check_parameters:'
	1133	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1134	' galilei_transformation = .T.'
	1135	ENDIF
	1136	CALL local_stop
	1137	ENDIF
[75]	1138	! IF ( conserve_volume_flow ) THEN
	1139	! IF ( myid == 0 ) THEN
	1140	! PRINT*, '+++ check_parameters:'
	1141	! PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1142	! ' conserve_volume_flow = .T.'
	1143	! ENDIF
	1144	! CALL local_stop
	1145	! ENDIF
[1]	1146	ENDIF
	1147
	1148	!
	1149	!-- Bottom boundary condition for the turbulent Kinetic energy
	1150	IF ( bc_e_b == 'neumann' ) THEN
	1151	ibc_e_b = 1
	1152	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
	1153	IF ( myid == 0 ) THEN
	1154	PRINT*, '+++ WARNING: check_parameters:'
	1155	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
	1156	ENDIF
	1157	ENDIF
	1158	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1159	ibc_e_b = 2
	1160	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
	1161	IF ( myid == 0 ) THEN
	1162	PRINT*, '+++ WARNING: check_parameters:'
	1163	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
	1164	ENDIF
	1165	ENDIF
	1166	IF ( .NOT. prandtl_layer ) THEN
	1167	bc_e_b = 'neumann'
	1168	ibc_e_b = 1
	1169	IF ( myid == 0 ) THEN
	1170	PRINT*, '+++ WARNING: check_parameters:'
	1171	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
	1172	ENDIF
	1173	ENDIF
	1174	ELSE
	1175	IF ( myid == 0 ) THEN
	1176	PRINT*, '+++ check_parameters:'
	1177	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
	1178	ENDIF
	1179	CALL local_stop
	1180	ENDIF
	1181
	1182	!
	1183	!-- Boundary conditions for perturbation pressure
	1184	IF ( bc_p_b == 'dirichlet' ) THEN
	1185	ibc_p_b = 0
	1186	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1187	ibc_p_b = 1
	1188	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1189	ibc_p_b = 2
	1190	ELSE
	1191	IF ( myid == 0 ) THEN
	1192	PRINT*, '+++ check_parameters:'
	1193	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
	1194	ENDIF
	1195	CALL local_stop
	1196	ENDIF
	1197	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
	1198	IF ( myid == 0 ) THEN
	1199	PRINT*, '+++ check_parameters:'
	1200	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
	1201	' not allowed with'
	1202	PRINT*, ' prandtl_layer = .FALSE.'
	1203	ENDIF
	1204	CALL local_stop
	1205	ENDIF
	1206	IF ( bc_p_t == 'dirichlet' ) THEN
	1207	ibc_p_t = 0
	1208	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1209	ibc_p_t = 1
	1210	ELSE
	1211	IF ( myid == 0 ) THEN
	1212	PRINT*, '+++ check_parameters:'
	1213	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
	1214	ENDIF
	1215	CALL local_stop
	1216	ENDIF
	1217
	1218	!
	1219	!-- Boundary conditions for potential temperature
[102]	1220	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1221	ibc_pt_b = 2
[1]	1222	ELSE
[102]	1223	IF ( bc_pt_b == 'dirichlet' ) THEN
	1224	ibc_pt_b = 0
	1225	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1226	ibc_pt_b = 1
	1227	ELSE
	1228	IF ( myid == 0 ) THEN
	1229	PRINT*, '+++ check_parameters:'
	1230	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
	1231	ENDIF
	1232	CALL local_stop
[1]	1233	ENDIF
	1234	ENDIF
[102]	1235
[1]	1236	IF ( bc_pt_t == 'dirichlet' ) THEN
	1237	ibc_pt_t = 0
	1238	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1239	ibc_pt_t = 1
[19]	1240	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1241	ibc_pt_t = 2
[1]	1242	ELSE
	1243	IF ( myid == 0 ) THEN
	1244	PRINT*, '+++ check_parameters:'
	1245	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
	1246	ENDIF
	1247	CALL local_stop
	1248	ENDIF
	1249
[20]	1250	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1251	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1252	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1253	top_momentumflux_v /= 9999999.9 ) THEN
	1254	constant_top_momentumflux = .TRUE.
	1255	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
	1256	top_momentumflux_v == 9999999.9 ) ) THEN
	1257	IF ( myid == 0 ) THEN
	1258	PRINT*, '+++ check_parameters:'
	1259	PRINT*, ' both, top_momentumflux_u AND top_momentumflux_v'
	1260	PRINT*, ' must be set'
	1261	ENDIF
	1262	CALL local_stop
	1263	ENDIF
[1]	1264
	1265	!
	1266	!-- A given surface temperature implies Dirichlet boundary condition for
	1267	!-- temperature. In this case specification of a constant heat flux is
	1268	!-- forbidden.
	1269	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1270	surface_heatflux /= 0.0 ) THEN
	1271	IF ( myid == 0 ) THEN
	1272	PRINT*, '+++ check_parameters:'
	1273	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
	1274	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
	1275	ENDIF
	1276	CALL local_stop
	1277	ENDIF
	1278	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
	1279	IF ( myid == 0 ) THEN
	1280	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
	1281	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
	1282	pt_surface_initial_change
	1283	ENDIF
	1284	CALL local_stop
	1285	ENDIF
	1286
	1287	!
[19]	1288	!-- A given temperature at the top implies Dirichlet boundary condition for
	1289	!-- temperature. In this case specification of a constant heat flux is
	1290	!-- forbidden.
	1291	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1292	top_heatflux /= 0.0 ) THEN
	1293	IF ( myid == 0 ) THEN
	1294	PRINT*, '+++ check_parameters:'
	1295	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
	1296	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
	1297	ENDIF
	1298	CALL local_stop
	1299	ENDIF
	1300
	1301	!
[95]	1302	!-- Boundary conditions for salinity
	1303	IF ( ocean ) THEN
	1304	IF ( bc_sa_t == 'dirichlet' ) THEN
	1305	ibc_sa_t = 0
	1306	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1307	ibc_sa_t = 1
	1308	ELSE
	1309	IF ( myid == 0 ) THEN
	1310	PRINT*, '+++ check_parameters:'
	1311	PRINT*, ' unknown boundary condition: bc_sa_t = ', bc_sa_t
	1312	ENDIF
	1313	CALL local_stop
	1314	ENDIF
	1315
	1316	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1317	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
	1318	IF ( myid == 0 ) THEN
	1319	PRINT*, '+++ check_parameters:'
	1320	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
	1321	PRINT*, ' requires to set top_salinityflux '
	1322	ENDIF
	1323	CALL local_stop
	1324	ENDIF
[95]	1325
	1326	!
	1327	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1328	!-- salinity. In this case specification of a constant salinity flux is
	1329	!-- forbidden.
	1330	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1331	top_salinityflux /= 0.0 ) THEN
	1332	IF ( myid == 0 ) THEN
	1333	PRINT*, '+++ check_parameters:'
	1334	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
	1335	PRINT*, ' is not allowed with constant_top_salinityflux = ', &
	1336	'.TRUE.'
	1337	ENDIF
	1338	CALL local_stop
	1339	ENDIF
	1340
	1341	ENDIF
	1342
	1343	!
[75]	1344	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1345	!-- water content / scalar
[75]	1346	IF ( humidity .OR. passive_scalar ) THEN
	1347	IF ( humidity ) THEN
[1]	1348	sq = 'q'
	1349	ELSE
	1350	sq = 's'
	1351	ENDIF
	1352	IF ( bc_q_b == 'dirichlet' ) THEN
	1353	ibc_q_b = 0
	1354	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1355	ibc_q_b = 1
	1356	ELSE
	1357	IF ( myid == 0 ) THEN
	1358	PRINT*, '+++ check_parameters:'
	1359	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
	1360	ENDIF
	1361	CALL local_stop
	1362	ENDIF
	1363	IF ( bc_q_t == 'dirichlet' ) THEN
	1364	ibc_q_t = 0
	1365	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1366	ibc_q_t = 1
	1367	ELSE
	1368	IF ( myid == 0 ) THEN
	1369	PRINT*, '+++ check_parameters:'
	1370	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
	1371	ENDIF
	1372	CALL local_stop
	1373	ENDIF
	1374
	1375	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1376
	1377	!
	1378	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1379	!-- humidity. In this case specification of a constant water flux is
[1]	1380	!-- forbidden.
	1381	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
	1382	IF ( myid == 0 ) THEN
	1383	PRINT*, '+++ check_parameters:'
	1384	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
	1385	PRINT*, ' is not allowed with prescribed surface flux'
	1386	ENDIF
	1387	CALL local_stop
	1388	ENDIF
	1389	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
	1390	IF ( myid == 0 ) THEN
	1391	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
	1392	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
	1393	' = ', q_surface_initial_change
	1394	ENDIF
	1395	CALL local_stop
	1396	ENDIF
	1397
	1398	ENDIF
	1399
	1400	!
	1401	!-- Boundary conditions for horizontal components of wind speed
	1402	IF ( bc_uv_b == 'dirichlet' ) THEN
	1403	ibc_uv_b = 0
	1404	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1405	ibc_uv_b = 1
	1406	IF ( prandtl_layer ) THEN
	1407	IF ( myid == 0 ) THEN
	1408	PRINT*, '+++ check_parameters:'
	1409	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
	1410	' is not allowed with'
	1411	PRINT*, ' prandtl_layer = .TRUE.'
	1412	ENDIF
	1413	CALL local_stop
	1414	ENDIF
	1415	ELSE
	1416	IF ( myid == 0 ) THEN
	1417	PRINT*, '+++ check_parameters:'
	1418	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
	1419	ENDIF
	1420	CALL local_stop
	1421	ENDIF
[108]	1422	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1423	bc_uv_t = 'neumann'
[1]	1424	ibc_uv_t = 1
	1425	ELSE
[132]	1426	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1427	ibc_uv_t = 0
	1428	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1429	ibc_uv_t = 1
	1430	ELSE
	1431	IF ( myid == 0 ) THEN
	1432	PRINT*, '+++ check_parameters:'
	1433	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
	1434	ENDIF
	1435	CALL local_stop
[1]	1436	ENDIF
	1437	ENDIF
	1438
	1439	!
	1440	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1441	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1442	IF ( momentum_advec == 'ups-scheme' ) THEN
	1443	rayleigh_damping_factor = 0.01
	1444	ELSE
	1445	rayleigh_damping_factor = 0.0
	1446	ENDIF
	1447	ELSE
	1448	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1449	THEN
	1450	IF ( myid == 0 ) THEN
	1451	PRINT*, '+++ check_parameters:'
	1452	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
	1453	' out of range [0.0,1.0]'
	1454	ENDIF
	1455	CALL local_stop
	1456	ENDIF
	1457	ENDIF
	1458
	1459	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1460	IF ( .NOT. ocean ) THEN
	1461	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1462	ELSE
	1463	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1464	ENDIF
[1]	1465	ELSE
[108]	1466	IF ( .NOT. ocean ) THEN
	1467	IF ( rayleigh_damping_height < 0.0 .OR. &
	1468	rayleigh_damping_height > zu(nzt) ) THEN
	1469	IF ( myid == 0 ) THEN
	1470	PRINT*, '+++ check_parameters:'
	1471	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
	1472	' out of range [0.0,', zu(nzt), ']'
	1473	ENDIF
	1474	CALL local_stop
[1]	1475	ENDIF
[108]	1476	ELSE
	1477	IF ( rayleigh_damping_height > 0.0 .OR. &
	1478	rayleigh_damping_height < zu(nzb) ) THEN
	1479	IF ( myid == 0 ) THEN
	1480	PRINT*, '+++ check_parameters:'
	1481	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
	1482	' out of range [0.0,', zu(nzb), ']'
	1483	ENDIF
	1484	CALL local_stop
	1485	ENDIF
[1]	1486	ENDIF
	1487	ENDIF
	1488
	1489	!
	1490	!-- Check limiters for Upstream-Spline scheme
	1491	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1492	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1493	overshoot_limit_e < 0.0 ) THEN
	1494	IF ( myid == 0 ) THEN
	1495	PRINT*, '+++ check_parameters:'
	1496	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
	1497	ENDIF
	1498	CALL local_stop
	1499	ENDIF
	1500	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1501	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
	1502	IF ( myid == 0 ) THEN
	1503	PRINT*, '+++ check_parameters:'
	1504	PRINT*, ' ups_limit_... < 0.0 is not allowed'
	1505	ENDIF
	1506	CALL local_stop
	1507	ENDIF
	1508
	1509	!
	1510	!-- Check number of chosen statistic regions. More than 10 regions are not
	1511	!-- allowed, because so far no more than 10 corresponding output files can
	1512	!-- be opened (cf. check_open)
	1513	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
	1514	IF ( myid == 0 ) THEN
	1515	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
	1516	statistic_regions+1
	1517	PRINT*, ' Only 10 regions are allowed'
	1518	ENDIF
	1519	CALL local_stop
	1520	ENDIF
	1521	IF ( normalizing_region > statistic_regions .OR. &
	1522	normalizing_region < 0) THEN
	1523	IF ( myid == 0 ) THEN
	1524	PRINT*, '+++ check_parameters: normalizing_region = ', &
	1525	normalizing_region, ' is unknown'
	1526	PRINT*, ' Must be <= ', statistic_regions
	1527	ENDIF
	1528	CALL local_stop
	1529	ENDIF
	1530
	1531	!
[116]	1532	!-- Check the interval for sorting particles.
	1533	!-- Using particles as cloud droplets requires sorting after each timestep.
	1534	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1535	dt_sort_particles = 0.0
	1536	IF ( myid == 0 ) THEN
	1537	PRINT*, '+++ WARNING: check_parameters:'
	1538	PRINT*, ' dt_sort_particles is reset to 0.0 because ', &
	1539	'of cloud_droplets = .TRUE.'
	1540	ENDIF
	1541	ENDIF
	1542
	1543	!
[1]	1544	!-- Set the default intervals for data output, if necessary
	1545	!-- NOTE: dt_dosp has already been set in package_parin
	1546	IF ( dt_data_output /= 9999999.9 ) THEN
	1547	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1548	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1549	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1550	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1551	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1552	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1553	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1554	ENDIF
	1555
	1556	!
	1557	!-- Set the default skip time intervals for data output, if necessary
	1558	IF ( skip_time_dopr == 9999999.9 ) &
	1559	skip_time_dopr = skip_time_data_output
	1560	IF ( skip_time_dosp == 9999999.9 ) &
	1561	skip_time_dosp = skip_time_data_output
	1562	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1563	skip_time_do2d_xy = skip_time_data_output
	1564	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1565	skip_time_do2d_xz = skip_time_data_output
	1566	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1567	skip_time_do2d_yz = skip_time_data_output
	1568	IF ( skip_time_do3d == 9999999.9 ) &
	1569	skip_time_do3d = skip_time_data_output
	1570	IF ( skip_time_data_output_av == 9999999.9 ) &
	1571	skip_time_data_output_av = skip_time_data_output
	1572
	1573	!
	1574	!-- Check the average intervals (first for 3d-data, then for profiles and
	1575	!-- spectra)
	1576	IF ( averaging_interval > dt_data_output_av ) THEN
	1577	IF ( myid == 0 ) THEN
	1578	PRINT*, '+++ check_parameters: average_interval=', &
	1579	averaging_interval, ' must be <= dt_data_output=', &
	1580	dt_data_output
	1581	ENDIF
	1582	CALL local_stop
	1583	ENDIF
	1584
	1585	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1586	averaging_interval_pr = averaging_interval
	1587	ENDIF
	1588
	1589	IF ( averaging_interval_pr > dt_dopr ) THEN
	1590	IF ( myid == 0 ) THEN
	1591	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
	1592	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
	1593	ENDIF
	1594	CALL local_stop
	1595	ENDIF
	1596
	1597	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1598	averaging_interval_sp = averaging_interval
	1599	ENDIF
	1600
	1601	IF ( averaging_interval_sp > dt_dosp ) THEN
	1602	IF ( myid == 0 ) THEN
	1603	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
	1604	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
	1605	ENDIF
	1606	CALL local_stop
	1607	ENDIF
	1608
	1609	!
	1610	!-- Set the default interval for profiles entering the temporal average
	1611	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1612	dt_averaging_input_pr = dt_averaging_input
	1613	ENDIF
	1614
	1615	!
	1616	!-- Set the default interval for the output of timeseries to a reasonable
	1617	!-- value (tries to minimize the number of calls of flow_statistics)
	1618	IF ( dt_dots == 9999999.9 ) THEN
	1619	IF ( averaging_interval_pr == 0.0 ) THEN
	1620	dt_dots = MIN( dt_run_control, dt_dopr )
	1621	ELSE
	1622	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1623	ENDIF
	1624	ENDIF
	1625
	1626	!
	1627	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1628	IF ( dt_averaging_input > averaging_interval ) THEN
	1629	IF ( myid == 0 ) THEN
	1630	PRINT*, '+++ check_parameters: dt_averaging_input=', &
	1631	dt_averaging_input, ' must be <= averaging_interval=', &
	1632	averaging_interval
	1633	ENDIF
	1634	CALL local_stop
	1635	ENDIF
	1636
	1637	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
	1638	IF ( myid == 0 ) THEN
	1639	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
	1640	dt_averaging_input_pr, &
	1641	' must be <= averaging_interval_pr=', &
	1642	averaging_interval_pr
	1643	ENDIF
	1644	CALL local_stop
	1645	ENDIF
	1646
	1647	!
[72]	1648	!-- Set the default value for the integration interval of precipitation amount
	1649	IF ( precipitation ) THEN
	1650	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1651	precipitation_amount_interval = dt_do2d_xy
	1652	ELSE
	1653	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
	1654	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
	1655	'precipitation_amount_interval =', &
	1656	precipitation_amount_interval, &
	1657	' must not be larger than dt_do2d_xy', &
	1658	' = ', dt_do2d_xy
	1659	CALL local_stop
	1660	ENDIF
	1661	ENDIF
	1662	ENDIF
	1663
	1664	!
[1]	1665	!-- Determine the number of output profiles and check whether they are
	1666	!-- permissible
	1667	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1668
	1669	dopr_n = dopr_n + 1
	1670	i = dopr_n
	1671
	1672	!
	1673	!-- Determine internal profile number (for hom, homs)
	1674	!-- and store height levels
	1675	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1676
	1677	CASE ( 'u', '#u' )
	1678	dopr_index(i) = 1
[87]	1679	dopr_unit(i) = 'm/s'
[1]	1680	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1681	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1682	dopr_initial_index(i) = 5
	1683	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1684	data_output_pr(i) = data_output_pr(i)(2:)
	1685	ENDIF
	1686
	1687	CASE ( 'v', '#v' )
	1688	dopr_index(i) = 2
[87]	1689	dopr_unit(i) = 'm/s'
	1690	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1691	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1692	dopr_initial_index(i) = 6
	1693	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1694	data_output_pr(i) = data_output_pr(i)(2:)
	1695	ENDIF
	1696
	1697	CASE ( 'w' )
	1698	dopr_index(i) = 3
[87]	1699	dopr_unit(i) = 'm/s'
	1700	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1701
	1702	CASE ( 'pt', '#pt' )
	1703	IF ( .NOT. cloud_physics ) THEN
	1704	dopr_index(i) = 4
[87]	1705	dopr_unit(i) = 'K'
[1]	1706	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1707	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1708	dopr_initial_index(i) = 7
	1709	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1710	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1711	data_output_pr(i) = data_output_pr(i)(2:)
	1712	ENDIF
	1713	ELSE
	1714	dopr_index(i) = 43
[87]	1715	dopr_unit(i) = 'K'
[1]	1716	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1717	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1718	dopr_initial_index(i) = 28
	1719	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1720	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1721	data_output_pr(i) = data_output_pr(i)(2:)
	1722	ENDIF
	1723	ENDIF
	1724
	1725	CASE ( 'e' )
	1726	dopr_index(i) = 8
[87]	1727	dopr_unit(i) = 'm2/s2'
[1]	1728	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1729	hom(nzb,2,8,:) = 0.0
	1730
	1731	CASE ( 'km', '#km' )
	1732	dopr_index(i) = 9
[87]	1733	dopr_unit(i) = 'm2/s'
[1]	1734	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1735	hom(nzb,2,9,:) = 0.0
	1736	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1737	dopr_initial_index(i) = 23
	1738	hom(:,2,23,:) = hom(:,2,9,:)
	1739	data_output_pr(i) = data_output_pr(i)(2:)
	1740	ENDIF
	1741
	1742	CASE ( 'kh', '#kh' )
	1743	dopr_index(i) = 10
[87]	1744	dopr_unit(i) = 'm2/s'
[1]	1745	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1746	hom(nzb,2,10,:) = 0.0
	1747	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1748	dopr_initial_index(i) = 24
	1749	hom(:,2,24,:) = hom(:,2,10,:)
	1750	data_output_pr(i) = data_output_pr(i)(2:)
	1751	ENDIF
	1752
	1753	CASE ( 'l', '#l' )
	1754	dopr_index(i) = 11
[87]	1755	dopr_unit(i) = 'm'
[1]	1756	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1757	hom(nzb,2,11,:) = 0.0
	1758	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1759	dopr_initial_index(i) = 25
	1760	hom(:,2,25,:) = hom(:,2,11,:)
	1761	data_output_pr(i) = data_output_pr(i)(2:)
	1762	ENDIF
	1763
	1764	CASE ( 'w"u"' )
	1765	dopr_index(i) = 12
[87]	1766	dopr_unit(i) = 'm2/s2'
[1]	1767	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1768	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1769
	1770	CASE ( 'wu' )
	1771	dopr_index(i) = 13
[87]	1772	dopr_unit(i) = 'm2/s2'
[1]	1773	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1774
	1775	CASE ( 'w"v"' )
	1776	dopr_index(i) = 14
[87]	1777	dopr_unit(i) = 'm2/s2'
[1]	1778	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1779	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1780
	1781	CASE ( 'wv' )
	1782	dopr_index(i) = 15
[87]	1783	dopr_unit(i) = 'm2/s2'
[1]	1784	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1785
	1786	CASE ( 'w"pt"' )
	1787	dopr_index(i) = 16
[87]	1788	dopr_unit(i) = 'K m/s'
[1]	1789	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1790
	1791	CASE ( 'wpt' )
	1792	dopr_index(i) = 17
[87]	1793	dopr_unit(i) = 'K m/s'
[1]	1794	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1795
	1796	CASE ( 'wpt' )
	1797	dopr_index(i) = 18
[87]	1798	dopr_unit(i) = 'K m/s'
[1]	1799	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1800
	1801	CASE ( 'wu' )
	1802	dopr_index(i) = 19
[87]	1803	dopr_unit(i) = 'm2/s2'
[1]	1804	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1805	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1806
	1807	CASE ( 'wv' )
	1808	dopr_index(i) = 20
[87]	1809	dopr_unit(i) = 'm2/s2'
[1]	1810	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1811	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1812
	1813	CASE ( 'wptBC' )
	1814	dopr_index(i) = 21
[87]	1815	dopr_unit(i) = 'K m/s'
[1]	1816	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1817
	1818	CASE ( 'wptBC' )
	1819	dopr_index(i) = 22
[87]	1820	dopr_unit(i) = 'K m/s'
[1]	1821	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1822
[96]	1823	CASE ( 'sa', '#sa' )
	1824	IF ( .NOT. ocean ) THEN
	1825	IF ( myid == 0 ) THEN
	1826	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1827	data_output_pr(i), &
	1828	' is not implemented for ocean = FALSE'
	1829	ENDIF
	1830	CALL local_stop
	1831	ELSE
	1832	dopr_index(i) = 23
	1833	dopr_unit(i) = 'psu'
	1834	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1835	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1836	dopr_initial_index(i) = 26
	1837	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1838	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1839	data_output_pr(i) = data_output_pr(i)(2:)
	1840	ENDIF
	1841	ENDIF
	1842
[1]	1843	CASE ( 'u*2' )
	1844	dopr_index(i) = 30
[87]	1845	dopr_unit(i) = 'm2/s2'
[1]	1846	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1847
	1848	CASE ( 'v*2' )
	1849	dopr_index(i) = 31
[87]	1850	dopr_unit(i) = 'm2/s2'
[1]	1851	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1852
	1853	CASE ( 'w*2' )
	1854	dopr_index(i) = 32
[87]	1855	dopr_unit(i) = 'm2/s2'
[1]	1856	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1857
	1858	CASE ( 'pt*2' )
	1859	dopr_index(i) = 33
[87]	1860	dopr_unit(i) = 'K2'
[1]	1861	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1862
	1863	CASE ( 'e*' )
	1864	dopr_index(i) = 34
[87]	1865	dopr_unit(i) = 'm2/s2'
[1]	1866	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1867
	1868	CASE ( 'w2pt' )
	1869	dopr_index(i) = 35
[87]	1870	dopr_unit(i) = 'K m2/s2'
[1]	1871	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1872
	1873	CASE ( 'wpt2' )
	1874	dopr_index(i) = 36
[87]	1875	dopr_unit(i) = 'K2 m/s'
[1]	1876	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1877
	1878	CASE ( 'we' )
	1879	dopr_index(i) = 37
[87]	1880	dopr_unit(i) = 'm3/s3'
[1]	1881	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1882
	1883	CASE ( 'w*3' )
	1884	dopr_index(i) = 38
[87]	1885	dopr_unit(i) = 'm3/s3'
[1]	1886	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1887
	1888	CASE ( 'Sw' )
	1889	dopr_index(i) = 39
[89]	1890	dopr_unit(i) = 'none'
[1]	1891	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1892
	1893	CASE ( 'q', '#q' )
[108]	1894	IF ( .NOT. humidity ) THEN
[1]	1895	IF ( myid == 0 ) THEN
	1896	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1897	data_output_pr(i), &
[108]	1898	' is not implemented for humidity = FALSE'
[1]	1899	ENDIF
	1900	CALL local_stop
	1901	ELSE
	1902	dopr_index(i) = 41
[87]	1903	dopr_unit(i) = 'kg/kg'
	1904	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1905	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1906	dopr_initial_index(i) = 26
	1907	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1908	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1909	data_output_pr(i) = data_output_pr(i)(2:)
	1910	ENDIF
	1911	ENDIF
	1912
	1913	CASE ( 's', '#s' )
	1914	IF ( .NOT. passive_scalar ) THEN
	1915	IF ( myid == 0 ) THEN
	1916	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1917	data_output_pr(i), &
	1918	' is not implemented for passive_scalar = FALSE'
	1919	ENDIF
	1920	CALL local_stop
	1921	ELSE
	1922	dopr_index(i) = 41
[87]	1923	dopr_unit(i) = 'kg/m3'
	1924	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1925	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1926	dopr_initial_index(i) = 26
	1927	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1928	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1929	data_output_pr(i) = data_output_pr(i)(2:)
	1930	ENDIF
	1931	ENDIF
	1932
	1933	CASE ( 'qv', '#qv' )
	1934	IF ( .NOT. cloud_physics ) THEN
	1935	dopr_index(i) = 41
[87]	1936	dopr_unit(i) = 'kg/kg'
	1937	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1938	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1939	dopr_initial_index(i) = 26
	1940	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1941	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1942	data_output_pr(i) = data_output_pr(i)(2:)
	1943	ENDIF
	1944	ELSE
	1945	dopr_index(i) = 42
[87]	1946	dopr_unit(i) = 'kg/kg'
	1947	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1948	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1949	dopr_initial_index(i) = 27
	1950	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1951	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1952	data_output_pr(i) = data_output_pr(i)(2:)
	1953	ENDIF
	1954	ENDIF
	1955
	1956	CASE ( 'lpt', '#lpt' )
	1957	IF ( .NOT. cloud_physics ) THEN
	1958	IF ( myid == 0 ) THEN
	1959	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1960	data_output_pr(i), &
	1961	' is not implemented for cloud_physics = FALSE'
	1962	ENDIF
	1963	CALL local_stop
	1964	ELSE
	1965	dopr_index(i) = 4
[87]	1966	dopr_unit(i) = 'K'
[1]	1967	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1968	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1969	dopr_initial_index(i) = 7
	1970	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	1971	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	1972	data_output_pr(i) = data_output_pr(i)(2:)
	1973	ENDIF
	1974	ENDIF
	1975
	1976	CASE ( 'vpt', '#vpt' )
	1977	dopr_index(i) = 44
[87]	1978	dopr_unit(i) = 'K'
	1979	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1980	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1981	dopr_initial_index(i) = 29
	1982	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	1983	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	1984	data_output_pr(i) = data_output_pr(i)(2:)
	1985	ENDIF
	1986
	1987	CASE ( 'w"vpt"' )
	1988	dopr_index(i) = 45
[87]	1989	dopr_unit(i) = 'K m/s'
[1]	1990	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	1991
	1992	CASE ( 'wvpt' )
	1993	dopr_index(i) = 46
[87]	1994	dopr_unit(i) = 'K m/s'
[1]	1995	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	1996
	1997	CASE ( 'wvpt' )
	1998	dopr_index(i) = 47
[87]	1999	dopr_unit(i) = 'K m/s'
[1]	2000	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2001
	2002	CASE ( 'w"q"' )
[108]	2003	IF ( .NOT. humidity ) THEN
[1]	2004	IF ( myid == 0 ) THEN
	2005	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2006	data_output_pr(i), &
[108]	2007	' is not implemented for humidity = FALSE'
[1]	2008	ENDIF
	2009	CALL local_stop
	2010	ELSE
	2011	dopr_index(i) = 48
[87]	2012	dopr_unit(i) = 'kg/kg m/s'
[1]	2013	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2014	ENDIF
	2015
	2016	CASE ( 'wq' )
[108]	2017	IF ( .NOT. humidity ) THEN
[1]	2018	IF ( myid == 0 ) THEN
	2019	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2020	data_output_pr(i), &
[108]	2021	' is not implemented for humidity = FALSE'
[1]	2022	ENDIF
	2023	CALL local_stop
	2024	ELSE
	2025	dopr_index(i) = 49
[87]	2026	dopr_unit(i) = 'kg/kg m/s'
[1]	2027	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2028	ENDIF
	2029
	2030	CASE ( 'wq' )
[108]	2031	IF ( .NOT. humidity ) THEN
[1]	2032	IF ( myid == 0 ) THEN
	2033	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2034	data_output_pr(i), &
[108]	2035	' is not implemented for humidity = FALSE'
[1]	2036	ENDIF
	2037	CALL local_stop
	2038	ELSE
	2039	dopr_index(i) = 50
[87]	2040	dopr_unit(i) = 'kg/kg m/s'
[1]	2041	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2042	ENDIF
	2043
	2044	CASE ( 'w"s"' )
	2045	IF ( .NOT. passive_scalar ) THEN
	2046	IF ( myid == 0 ) THEN
	2047	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2048	data_output_pr(i), &
	2049	' is not implemented for passive_scalar = FALSE'
	2050	ENDIF
	2051	CALL local_stop
	2052	ELSE
	2053	dopr_index(i) = 48
[87]	2054	dopr_unit(i) = 'kg/m3 m/s'
[1]	2055	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2056	ENDIF
	2057
	2058	CASE ( 'ws' )
	2059	IF ( .NOT. passive_scalar ) THEN
	2060	IF ( myid == 0 ) THEN
	2061	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2062	data_output_pr(i), &
	2063	' is not implemented for passive_scalar = FALSE'
	2064	ENDIF
	2065	CALL local_stop
	2066	ELSE
	2067	dopr_index(i) = 49
[87]	2068	dopr_unit(i) = 'kg/m3 m/s'
[1]	2069	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2070	ENDIF
	2071
	2072	CASE ( 'ws' )
	2073	IF ( .NOT. passive_scalar ) THEN
	2074	IF ( myid == 0 ) THEN
	2075	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2076	data_output_pr(i), &
	2077	' is not implemented for passive_scalar = FALSE'
	2078	ENDIF
	2079	CALL local_stop
	2080	ELSE
	2081	dopr_index(i) = 50
[87]	2082	dopr_unit(i) = 'kg/m3 m/s'
[1]	2083	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2084	ENDIF
	2085
	2086	CASE ( 'w"qv"' )
[75]	2087	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2088	THEN
	2089	dopr_index(i) = 48
[87]	2090	dopr_unit(i) = 'kg/kg m/s'
[1]	2091	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2092	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2093	dopr_index(i) = 51
[87]	2094	dopr_unit(i) = 'kg/kg m/s'
[1]	2095	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2096	ELSE
	2097	IF ( myid == 0 ) THEN
	2098	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2099	data_output_pr(i), &
	2100	' is not implemented for cloud_physics = FALSE', &
[75]	2101	' and humidity = FALSE'
[1]	2102	ENDIF
	2103	CALL local_stop
	2104	ENDIF
	2105
	2106	CASE ( 'wqv' )
[75]	2107	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2108	THEN
	2109	dopr_index(i) = 49
[87]	2110	dopr_unit(i) = 'kg/kg m/s'
[1]	2111	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2112	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2113	dopr_index(i) = 52
[87]	2114	dopr_unit(i) = 'kg/kg m/s'
[1]	2115	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2116	ELSE
	2117	IF ( myid == 0 ) THEN
	2118	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2119	data_output_pr(i), &
	2120	' is not implemented for cloud_physics = FALSE', &
[75]	2121	' and humidity = FALSE'
[1]	2122	ENDIF
	2123	CALL local_stop
	2124	ENDIF
	2125
	2126	CASE ( 'wqv' )
[75]	2127	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2128	THEN
	2129	dopr_index(i) = 50
[87]	2130	dopr_unit(i) = 'kg/kg m/s'
[1]	2131	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2132	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2133	dopr_index(i) = 53
[87]	2134	dopr_unit(i) = 'kg/kg m/s'
[1]	2135	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2136	ELSE
	2137	IF ( myid == 0 ) THEN
	2138	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2139	data_output_pr(i), &
	2140	' is not implemented for cloud_physics = FALSE', &
[75]	2141	' and humidity = FALSE'
[1]	2142	ENDIF
	2143	CALL local_stop
	2144	ENDIF
	2145
	2146	CASE ( 'ql' )
	2147	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
	2148	IF ( myid == 0 ) THEN
	2149	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2150	data_output_pr(i), &
	2151	' is not implemented for cloud_physics = FALSE'
	2152	ENDIF
	2153	CALL local_stop
	2154	ELSE
	2155	dopr_index(i) = 54
[87]	2156	dopr_unit(i) = 'kg/kg'
[1]	2157	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2158	ENDIF
	2159
	2160	CASE ( 'wuu*/dz' )
	2161	dopr_index(i) = 55
[87]	2162	dopr_unit(i) = 'm2/s3'
[1]	2163	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2164
	2165	CASE ( 'wp/dz' )
	2166	dopr_index(i) = 56
[87]	2167	dopr_unit(i) = 'm2/s3'
[106]	2168	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2169
	2170	CASE ( 'w"e/dz' )
	2171	dopr_index(i) = 57
[87]	2172	dopr_unit(i) = 'm2/s3'
[1]	2173	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2174
	2175	CASE ( 'u"pt"' )
	2176	dopr_index(i) = 58
[87]	2177	dopr_unit(i) = 'K m/s'
[1]	2178	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2179
	2180	CASE ( 'upt' )
	2181	dopr_index(i) = 59
[87]	2182	dopr_unit(i) = 'K m/s'
[1]	2183	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2184
	2185	CASE ( 'upt_t' )
	2186	dopr_index(i) = 60
[87]	2187	dopr_unit(i) = 'K m/s'
[1]	2188	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2189
	2190	CASE ( 'v"pt"' )
	2191	dopr_index(i) = 61
[87]	2192	dopr_unit(i) = 'K m/s'
[1]	2193	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2194
	2195	CASE ( 'vpt' )
	2196	dopr_index(i) = 62
[87]	2197	dopr_unit(i) = 'K m/s'
[1]	2198	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2199
	2200	CASE ( 'vpt_t' )
	2201	dopr_index(i) = 63
[87]	2202	dopr_unit(i) = 'K m/s'
[1]	2203	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2204
[96]	2205	CASE ( 'rho' )
	2206	dopr_index(i) = 64
	2207	dopr_unit(i) = 'kg/m3'
	2208	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2209
[96]	2210	CASE ( 'w"sa"' )
	2211	IF ( .NOT. ocean ) THEN
	2212	IF ( myid == 0 ) THEN
	2213	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2214	data_output_pr(i), &
	2215	' is not implemented for ocean = FALSE'
	2216	ENDIF
	2217	CALL local_stop
	2218	ELSE
	2219	dopr_index(i) = 65
	2220	dopr_unit(i) = 'psu m/s'
	2221	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2222	ENDIF
	2223
	2224	CASE ( 'wsa' )
	2225	IF ( .NOT. ocean ) THEN
	2226	IF ( myid == 0 ) THEN
	2227	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2228	data_output_pr(i), &
	2229	' is not implemented for ocean = FALSE'
	2230	ENDIF
	2231	CALL local_stop
	2232	ELSE
	2233	dopr_index(i) = 66
	2234	dopr_unit(i) = 'psu m/s'
	2235	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2236	ENDIF
	2237
	2238	CASE ( 'wsa' )
	2239	IF ( .NOT. ocean ) THEN
	2240	IF ( myid == 0 ) THEN
	2241	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2242	data_output_pr(i), &
	2243	' is not implemented for ocean = FALSE'
	2244	ENDIF
	2245	CALL local_stop
	2246	ELSE
	2247	dopr_index(i) = 67
	2248	dopr_unit(i) = 'psu m/s'
	2249	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2250	ENDIF
	2251
[106]	2252	CASE ( 'wp' )
	2253	dopr_index(i) = 68
	2254	dopr_unit(i) = 'm3/s3'
	2255	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2256
[106]	2257	CASE ( 'w"e' )
	2258	dopr_index(i) = 69
	2259	dopr_unit(i) = 'm3/s3'
	2260	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2261
[197]	2262	CASE ( 'q*2' )
	2263	IF ( .NOT. humidity ) THEN
	2264	IF ( myid == 0 ) THEN
	2265	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2266	data_output_pr(i), &
	2267	' is not implemented for humidity = FALSE'
	2268	ENDIF
	2269	CALL local_stop
	2270	ELSE
	2271	dopr_index(i) = 70
	2272	dopr_unit(i) = 'kg2/kg2'
	2273	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2274	ENDIF
[106]	2275
[1]	2276	CASE DEFAULT
[87]	2277
	2278	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2279
	2280	IF ( unit == 'illegal' ) THEN
	2281	IF ( myid == 0 ) THEN
	2282	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2283	PRINT*, '+++ check_parameters: illegal value for data_',&
	2284	'output_pr or data_output_pr_user: "', &
	2285	TRIM( data_output_pr(i) ), '"'
	2286	ELSE
	2287	PRINT*, '+++ check_parameters: illegal value for data_',&
	2288	'output_pr: "', TRIM( data_output_pr(i) ),'"'
	2289	ENDIF
	2290	ENDIF
	2291	CALL local_stop
[1]	2292	ENDIF
	2293
	2294	END SELECT
	2295	!
	2296	!-- Check to which of the predefined coordinate systems the profile belongs
	2297	DO k = 1, crmax
	2298	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2299	/=0 ) &
	2300	THEN
	2301	dopr_crossindex(i) = k
	2302	EXIT
	2303	ENDIF
	2304	ENDDO
	2305	!
	2306	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2307	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2308	!-- control characters
	2309	dopr_label(i) = data_output_pr(i)
	2310	position = INDEX( dopr_label(i) , '"' )
	2311	DO WHILE ( position /= 0 )
	2312	dopr_label(i)(position:position) = ''''
	2313	position = INDEX( dopr_label(i) , '"' )
	2314	ENDDO
	2315
	2316	ENDDO
	2317
	2318	!
	2319	!-- y-value range of the coordinate system (PROFIL).
	2320	!-- x-value range determined in plot_1d.
[94]	2321	IF ( .NOT. ocean ) THEN
	2322	cross_uymin = 0.0
	2323	IF ( z_max_do1d == -1.0 ) THEN
	2324	cross_uymax = zu(nzt+1)
	2325	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
	2326	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
	2327	z_max_do1d,' must be >= ', zu(nzb+1), &
	2328	' or <= ', zu(nzt+1)
	2329	CALL local_stop
	2330	ELSE
	2331	cross_uymax = z_max_do1d
	2332	ENDIF
[1]	2333	ENDIF
	2334
	2335	!
	2336	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2337	!-- permissible
	2338	DO i = 1, crmax
	2339	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2340
	2341	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2342	j = 0
	2343
	2344	CASE DEFAULT
	2345	IF ( myid == 0 ) THEN
	2346	PRINT*, '+++ check_parameters: unknown normalize method'
	2347	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
	2348	ENDIF
	2349	CALL local_stop
	2350
	2351	END SELECT
	2352	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2353
	2354	CASE ( '', 'z_i' )
	2355	j = 0
	2356
	2357	CASE DEFAULT
	2358	IF ( myid == 0 ) THEN
	2359	PRINT*, '+++ check_parameters: unknown normalize method'
	2360	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
	2361	ENDIF
	2362	CALL local_stop
	2363
	2364	END SELECT
	2365	ENDDO
	2366	!
	2367	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2368	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2369	THEN
	2370	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
	2371	'd=', z_max_do1d_normalized, ' must be >= 0.0'
	2372	CALL local_stop
	2373	ENDIF
	2374
	2375
	2376	!
	2377	!-- Append user-defined data output variables to the standard data output
	2378	IF ( data_output_user(1) /= ' ' ) THEN
	2379	i = 1
	2380	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2381	i = i + 1
	2382	ENDDO
	2383	j = 1
	2384	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2385	IF ( i > 100 ) THEN
	2386	IF ( myid == 0 ) THEN
	2387	PRINT*, '+++ check_parameters: number of output quantitities', &
	2388	' given by data_output and data_output_user'
	2389	PRINT*, ' exceeds the limit of 100'
	2390	ENDIF
	2391	CALL local_stop
	2392	ENDIF
	2393	data_output(i) = data_output_user(j)
	2394	i = i + 1
	2395	j = j + 1
	2396	ENDDO
	2397	ENDIF
	2398
	2399	!
	2400	!-- Check and set steering parameters for 2d/3d data output and averaging
	2401	i = 1
	2402	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2403	!
	2404	!-- Check for data averaging
	2405	ilen = LEN_TRIM( data_output(i) )
	2406	j = 0 ! no data averaging
	2407	IF ( ilen > 3 ) THEN
	2408	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2409	j = 1 ! data averaging
	2410	data_output(i) = data_output(i)(1:ilen-3)
	2411	ENDIF
	2412	ENDIF
	2413	!
	2414	!-- Check for cross section or volume data
	2415	ilen = LEN_TRIM( data_output(i) )
	2416	k = 0 ! 3d data
	2417	var = data_output(i)(1:ilen)
	2418	IF ( ilen > 3 ) THEN
	2419	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2420	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2421	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2422	k = 1 ! 2d data
	2423	var = data_output(i)(1:ilen-3)
	2424	ENDIF
	2425	ENDIF
	2426	!
	2427	!-- Check for allowed value and set units
	2428	SELECT CASE ( TRIM( var ) )
	2429
	2430	CASE ( 'e' )
	2431	IF ( constant_diffusion ) THEN
	2432	IF ( myid == 0 ) THEN
	2433	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2434	'" requires constant_diffusion = .FALSE.'
	2435	ENDIF
	2436	CALL local_stop
	2437	ENDIF
	2438	unit = 'm2/s2'
	2439
	2440	CASE ( 'pc', 'pr' )
	2441	IF ( .NOT. particle_advection ) THEN
	2442	IF ( myid == 0 ) THEN
	2443	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
[104]	2444	'" requires a "particles_par"-NAMELIST'
	2445	PRINT*, ' in the parameter file (PARIN)'
[1]	2446	ENDIF
	2447	CALL local_stop
	2448	ENDIF
	2449	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2450	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2451
	2452	CASE ( 'q', 'vpt' )
[75]	2453	IF ( .NOT. humidity ) THEN
[1]	2454	IF ( myid == 0 ) THEN
	2455	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
[75]	2456	'" requires humidity = .TRUE.'
[1]	2457	ENDIF
	2458	CALL local_stop
	2459	ENDIF
	2460	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2461	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2462
	2463	CASE ( 'ql' )
	2464	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
	2465	IF ( myid == 0 ) THEN
	2466	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2467	'" requires cloud_physics = .TRUE.'
	2468	PRINT*, ' or cloud_droplets = .TRUE.'
	2469	ENDIF
	2470	CALL local_stop
	2471	ENDIF
	2472	unit = 'kg/kg'
	2473
	2474	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2475	IF ( .NOT. cloud_droplets ) THEN
	2476	IF ( myid == 0 ) THEN
	2477	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2478	'" requires cloud_droplets = .TRUE.'
	2479	ENDIF
	2480	CALL local_stop
	2481	ENDIF
	2482	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2483	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2484	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2485
	2486	CASE ( 'qv' )
	2487	IF ( .NOT. cloud_physics ) THEN
	2488	IF ( myid == 0 ) THEN
	2489	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2490	'" requires cloud_physics = .TRUE.'
	2491	ENDIF
	2492	CALL local_stop
	2493	ENDIF
	2494	unit = 'kg/kg'
	2495
[96]	2496	CASE ( 'rho' )
	2497	IF ( .NOT. ocean ) THEN
	2498	IF ( myid == 0 ) THEN
	2499	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2500	'" requires ocean = .TRUE.'
	2501	ENDIF
	2502	CALL local_stop
	2503	ENDIF
	2504	unit = 'kg/m3'
	2505
[1]	2506	CASE ( 's' )
	2507	IF ( .NOT. passive_scalar ) THEN
	2508	IF ( myid == 0 ) THEN
	2509	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2510	'" requires passive_scalar = .TRUE.'
	2511	ENDIF
	2512	CALL local_stop
	2513	ENDIF
	2514	unit = 'conc'
	2515
[96]	2516	CASE ( 'sa' )
	2517	IF ( .NOT. ocean ) THEN
	2518	IF ( myid == 0 ) THEN
	2519	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2520	'" requires ocean = .TRUE.'
	2521	ENDIF
	2522	CALL local_stop
	2523	ENDIF
	2524	unit = 'psu'
	2525
[72]	2526	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
[1]	2527	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
	2528	IF ( myid == 0 ) THEN
	2529	PRINT*, '+++ check_parameters: illegal value for data_',&
	2530	'output: "', TRIM( var ), '" is only allowed'
	2531	PRINT*, ' for horizontal cross section'
	2532	ENDIF
	2533	CALL local_stop
	2534	ENDIF
	2535	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
	2536	IF ( myid == 0 ) THEN
	2537	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2538	'" requires cloud_physics = .TRUE.'
	2539	ENDIF
	2540	CALL local_stop
	2541	ENDIF
[72]	2542	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
	2543	IF ( myid == 0 ) THEN
	2544	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2545	'" requires precipitation = .TRUE.'
	2546	ENDIF
	2547	CALL local_stop
	2548	ENDIF
	2549	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
	2550	IF ( myid == 0 ) THEN
	2551	PRINT*, '+++ check_parameters: temporal averaging of ', &
	2552	' precipitation amount "', TRIM( var ), &
	2553	'" not possible'
	2554	ENDIF
	2555	CALL local_stop
	2556	ENDIF
	2557	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
	2558	IF ( myid == 0 ) THEN
	2559	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2560	'" requires precipitation = .TRUE.'
	2561	ENDIF
	2562	CALL local_stop
	2563	ENDIF
	2564
	2565
[1]	2566	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2567	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2568	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
[72]	2569	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2570	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2571	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[1]	2572
	2573	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2574	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2575	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2576	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2577	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2578	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2579	CONTINUE
	2580
	2581	CASE DEFAULT
	2582	CALL user_check_data_output( var, unit )
	2583
	2584	IF ( unit == 'illegal' ) THEN
	2585	IF ( myid == 0 ) THEN
	2586	IF ( data_output_user(1) /= ' ' ) THEN
	2587	PRINT*, '+++ check_parameters: illegal value for data_',&
	2588	'output or data_output_user: "', &
	2589	TRIM( data_output(i) ), '"'
	2590	ELSE
	2591	PRINT*, '+++ check_parameters: illegal value for data_',&
	2592	'output: "', TRIM( data_output(i) ), '"'
	2593	ENDIF
	2594	ENDIF
	2595	CALL local_stop
	2596	ENDIF
	2597
	2598	END SELECT
	2599	!
	2600	!-- Set the internal steering parameters appropriately
	2601	IF ( k == 0 ) THEN
	2602	do3d_no(j) = do3d_no(j) + 1
	2603	do3d(j,do3d_no(j)) = data_output(i)
	2604	do3d_unit(j,do3d_no(j)) = unit
	2605	ELSE
	2606	do2d_no(j) = do2d_no(j) + 1
	2607	do2d(j,do2d_no(j)) = data_output(i)
	2608	do2d_unit(j,do2d_no(j)) = unit
	2609	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2610	data_output_xy(j) = .TRUE.
	2611	ENDIF
	2612	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2613	data_output_xz(j) = .TRUE.
	2614	ENDIF
	2615	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2616	data_output_yz(j) = .TRUE.
	2617	ENDIF
	2618	ENDIF
	2619
	2620	IF ( j == 1 ) THEN
	2621	!
	2622	!-- Check, if variable is already subject to averaging
	2623	found = .FALSE.
	2624	DO k = 1, doav_n
	2625	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2626	ENDDO
	2627
	2628	IF ( .NOT. found ) THEN
	2629	doav_n = doav_n + 1
	2630	doav(doav_n) = var
	2631	ENDIF
	2632	ENDIF
	2633
	2634	i = i + 1
	2635	ENDDO
	2636
	2637	!
	2638	!-- Store sectional planes in one shared array
	2639	section(:,1) = section_xy
	2640	section(:,2) = section_xz
	2641	section(:,3) = section_yz
	2642
	2643	!
	2644	!-- Upper plot limit (grid point value) for 1D profiles
	2645	IF ( z_max_do1d == -1.0 ) THEN
	2646	nz_do1d = nzt+1
	2647	ELSE
	2648	DO k = nzb+1, nzt+1
	2649	nz_do1d = k
	2650	IF ( zw(k) > z_max_do1d ) EXIT
	2651	ENDDO
	2652	ENDIF
	2653
	2654	!
	2655	!-- Upper plot limit for 2D vertical sections
	2656	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2657	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
	2658	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
	2659	z_max_do2d, ' must be >= ', zu(nzb+1), &
	2660	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
	2661	CALL local_stop
	2662	ENDIF
	2663
	2664	!
	2665	!-- Upper plot limit for 3D arrays
	2666	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2667
	2668	!
	2669	!-- Determine and check accuracy for compressed 3D plot output
	2670	IF ( do3d_compress ) THEN
	2671	!
	2672	!-- Compression only permissible on T3E machines
	2673	IF ( host(1:3) /= 't3e' ) THEN
	2674	IF ( myid == 0 ) THEN
	2675	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
	2676	'ed on host "', TRIM( host ), '"'
	2677	ENDIF
	2678	CALL local_stop
	2679	ENDIF
	2680
	2681	i = 1
	2682	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2683
	2684	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2685	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2686	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
	2687	IF ( myid == 0 ) THEN
	2688	PRINT*, '+++ check_parameters: illegal precision: ', &
	2689	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
	2690	ENDIF
	2691	CALL local_stop
	2692	ENDIF
	2693
	2694	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2695	var = do3d_comp_prec(i)(1:ilen-1)
	2696
	2697	SELECT CASE ( var )
	2698
	2699	CASE ( 'u' )
	2700	j = 1
	2701	CASE ( 'v' )
	2702	j = 2
	2703	CASE ( 'w' )
	2704	j = 3
	2705	CASE ( 'p' )
	2706	j = 4
	2707	CASE ( 'pt' )
	2708	j = 5
	2709
	2710	CASE DEFAULT
	2711	IF ( myid == 0 ) THEN
	2712	PRINT*, '+++ check_parameters: unknown variable in ', &
	2713	'assignment'
	2714	PRINT*, ' do3d_comp_prec(', i, ')="', &
	2715	TRIM( do3d_comp_prec(i) ),'"'
	2716	ENDIF
	2717	CALL local_stop
	2718
	2719	END SELECT
	2720
	2721	plot_3d_precision(j)%precision = prec
	2722	i = i + 1
	2723
	2724	ENDDO
	2725	ENDIF
	2726
	2727	!
	2728	!-- Check the data output format(s)
	2729	IF ( data_output_format(1) == ' ' ) THEN
	2730	!
	2731	!-- Default value
	2732	netcdf_output = .TRUE.
	2733	ELSE
	2734	i = 1
	2735	DO WHILE ( data_output_format(i) /= ' ' )
	2736
	2737	SELECT CASE ( data_output_format(i) )
	2738
	2739	CASE ( 'netcdf' )
	2740	netcdf_output = .TRUE.
	2741	CASE ( 'iso2d' )
	2742	iso2d_output = .TRUE.
	2743	CASE ( 'profil' )
	2744	profil_output = .TRUE.
	2745	CASE ( 'avs' )
	2746	avs_output = .TRUE.
	2747
	2748	CASE DEFAULT
	2749	IF ( myid == 0 ) THEN
	2750	PRINT*, '+++ check_parameters:'
	2751	PRINT*, ' unknown value for data_output_format "', &
	2752	TRIM( data_output_format(i) ),'"'
	2753	ENDIF
	2754	CALL local_stop
	2755
	2756	END SELECT
	2757
	2758	i = i + 1
	2759	IF ( i > 10 ) EXIT
	2760
	2761	ENDDO
	2762
	2763	ENDIF
	2764
	2765	!
	2766	!-- Check netcdf precison
	2767	ldum = .FALSE.
	2768	CALL define_netcdf_header( 'ch', ldum, 0 )
	2769
	2770	!
	2771	!-- Check, whether a constant diffusion coefficient shall be used
	2772	IF ( km_constant /= -1.0 ) THEN
	2773	IF ( km_constant < 0.0 ) THEN
	2774	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
	2775	km_constant, ' < 0.0'
	2776	CALL local_stop
	2777	ELSE
	2778	IF ( prandtl_number < 0.0 ) THEN
	2779	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
	2780	prandtl_number, ' < 0.0'
	2781	CALL local_stop
	2782	ENDIF
	2783	constant_diffusion = .TRUE.
	2784
	2785	IF ( prandtl_layer ) THEN
	2786	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
	2787	'is not allowed with fixed value of km'
	2788	CALL local_stop
	2789	ENDIF
	2790	ENDIF
	2791	ENDIF
	2792
	2793	!
	2794	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2795	!-- for the horizontal diffusivity used within the outflow damping layer,
	2796	!-- and check/set the width of the damping layer
	2797	IF ( bc_lr /= 'cyclic' ) THEN
	2798	IF ( km_damp_max == -1.0 ) THEN
	2799	km_damp_max = 0.5 * dx
	2800	ENDIF
	2801	IF ( outflow_damping_width == -1.0 ) THEN
	2802	outflow_damping_width = MIN( 20, nx/2 )
	2803	ENDIF
	2804	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
	2805	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
	2806	'idth out of range'
	2807	CALL local_stop
	2808	ENDIF
	2809	ENDIF
	2810
	2811	IF ( bc_ns /= 'cyclic' ) THEN
	2812	IF ( km_damp_max == -1.0 ) THEN
	2813	km_damp_max = 0.5 * dy
	2814	ENDIF
	2815	IF ( outflow_damping_width == -1.0 ) THEN
	2816	outflow_damping_width = MIN( 20, ny/2 )
	2817	ENDIF
	2818	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
	2819	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
	2820	'idth out of range'
	2821	CALL local_stop
	2822	ENDIF
	2823	ENDIF
	2824
	2825	!
	2826	!-- Check value range for rif
	2827	IF ( rif_min >= rif_max ) THEN
	2828	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
	2829	' must be less than rif_max=', rif_max
	2830	CALL local_stop
	2831	ENDIF
	2832
	2833	!
	2834	!-- Determine upper and lower hight level indices for random perturbations
[97]	2835	IF ( disturbance_level_b == -9999999.9 ) THEN
	2836	IF ( ocean ) THEN
	2837	disturbance_level_b = zu((nzt*2)/3)
	2838	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2839	ELSE
	2840	disturbance_level_b = zu(nzb+3)
	2841	disturbance_level_ind_b = nzb + 3
	2842	ENDIF
[1]	2843	ELSEIF ( disturbance_level_b < zu(3) ) THEN
	2844	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
	2845	disturbance_level_b, ' must be >= ',zu(3), &
	2846	'(zu(3))'
	2847	CALL local_stop
	2848	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
	2849	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
	2850	disturbance_level_b, ' must be <= ',zu(nzt-2),&
	2851	'(zu(nzt-2))'
	2852	CALL local_stop
	2853	ELSE
	2854	DO k = 3, nzt-2
	2855	IF ( disturbance_level_b <= zu(k) ) THEN
	2856	disturbance_level_ind_b = k
	2857	EXIT
	2858	ENDIF
	2859	ENDDO
	2860	ENDIF
	2861
[97]	2862	IF ( disturbance_level_t == -9999999.9 ) THEN
	2863	IF ( ocean ) THEN
	2864	disturbance_level_t = zu(nzt-3)
	2865	disturbance_level_ind_t = nzt - 3
	2866	ELSE
	2867	disturbance_level_t = zu(nzt/3)
	2868	disturbance_level_ind_t = nzt / 3
	2869	ENDIF
[1]	2870	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
	2871	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
	2872	disturbance_level_t, ' must be <= ',zu(nzt-2),&
	2873	'(zu(nzt-2))'
	2874	CALL local_stop
	2875	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
	2876	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
	2877	disturbance_level_t, ' must be >= ', &
	2878	'disturbance_level_b=', disturbance_level_b
	2879	CALL local_stop
	2880	ELSE
	2881	DO k = 3, nzt-2
	2882	IF ( disturbance_level_t <= zu(k) ) THEN
	2883	disturbance_level_ind_t = k
	2884	EXIT
	2885	ENDIF
	2886	ENDDO
	2887	ENDIF
	2888
	2889	!
	2890	!-- Check again whether the levels determined this way are ok.
	2891	!-- Error may occur at automatic determination and too few grid points in
	2892	!-- z-direction.
	2893	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
	2894	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
	2895	'disturbance_level_ind_t=', &
	2896	disturbance_level_ind_t, ' must be >= ', &
	2897	'disturbance_level_ind_b=', &
	2898	disturbance_level_ind_b
	2899	CALL local_stop
	2900	ENDIF
	2901
	2902	!
	2903	!-- Determine the horizontal index range for random perturbations.
	2904	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2905	!-- near the inflow and the perturbation area is further limited to ...(1)
	2906	!-- after the initial phase of the flow.
	2907	dist_nxl = 0; dist_nxr = nx
	2908	dist_nys = 0; dist_nyn = ny
	2909	IF ( bc_lr /= 'cyclic' ) THEN
	2910	IF ( inflow_disturbance_begin == -1 ) THEN
	2911	inflow_disturbance_begin = MIN( 10, nx/2 )
	2912	ENDIF
	2913	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2914	THEN
	2915	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2916	'_begin out of range'
	2917	CALL local_stop
	2918	ENDIF
	2919	IF ( inflow_disturbance_end == -1 ) THEN
	2920	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2921	ENDIF
	2922	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2923	THEN
	2924	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2925	'_end out of range'
	2926	CALL local_stop
	2927	ENDIF
	2928	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2929	IF ( inflow_disturbance_begin == -1 ) THEN
	2930	inflow_disturbance_begin = MIN( 10, ny/2 )
	2931	ENDIF
	2932	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2933	THEN
	2934	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2935	'_begin out of range'
	2936	CALL local_stop
	2937	ENDIF
	2938	IF ( inflow_disturbance_end == -1 ) THEN
	2939	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2940	ENDIF
	2941	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2942	THEN
	2943	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2944	'_end out of range'
	2945	CALL local_stop
	2946	ENDIF
	2947	ENDIF
	2948
[73]	2949	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2950	dist_nxr = nx - inflow_disturbance_begin
	2951	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2952	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2953	dist_nxl = inflow_disturbance_begin
	2954	dist_nxr(1) = inflow_disturbance_end
[73]	2955	ENDIF
	2956	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2957	dist_nyn = ny - inflow_disturbance_begin
	2958	dist_nys(1) = ny - inflow_disturbance_end
[73]	2959	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2960	dist_nys = inflow_disturbance_begin
	2961	dist_nyn(1) = inflow_disturbance_end
	2962	ENDIF
	2963
	2964	!
[151]	2965	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2966	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2967	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
	2968	IF ( myid == 0 ) THEN
	2969	PRINT*, '+++ check_parameters:'
	2970	PRINT*, ' turbulent_inflow = .T. requires a Dirichlet condition', &
	2971	' at the inflow boundary'
	2972	ENDIF
	2973	CALL local_stop
	2974	ENDIF
	2975
	2976	!
	2977	!-- In case of turbulent inflow calculate the index of the recycling plane
	2978	IF ( turbulent_inflow ) THEN
	2979	IF ( recycling_width == 9999999.9 ) THEN
	2980	!
	2981	!-- Set the default value for the width of the recycling domain
	2982	recycling_width = 0.1 * nx * dx
	2983	ELSE
	2984	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
	2985	IF ( myid == 0 ) THEN
	2986	PRINT*, '+++ check_parameters:'
	2987	PRINT*, ' illegal value for recycling_width: ', &
	2988	recycling_width
	2989	ENDIF
	2990	CALL local_stop
	2991	ENDIF
	2992	ENDIF
	2993	!
	2994	!-- Calculate the index
	2995	recycling_plane = recycling_width / dx
	2996	ENDIF
	2997
	2998	!
[1]	2999	!-- Check random generator
	3000	IF ( random_generator /= 'system-specific' .AND. &
	3001	random_generator /= 'numerical-recipes' ) THEN
	3002	IF ( myid == 0 ) THEN
	3003	PRINT*, '+++ check_parameters:'
	3004	PRINT*, ' unknown random generator: random_generator=', &
	3005	random_generator
	3006	ENDIF
	3007	CALL local_stop
	3008	ENDIF
	3009
	3010	!
	3011	!-- Determine damping level index for 1D model
	3012	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3013	IF ( damp_level_1d == -1.0 ) THEN
	3014	damp_level_1d = zu(nzt+1)
	3015	damp_level_ind_1d = nzt + 1
	3016	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
	3017	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
	3018	damp_level_1d, ' must be > 0.0 and < ', &
	3019	'zu(nzt+1)', zu(nzt+1)
	3020	CALL local_stop
	3021	ELSE
	3022	DO k = 1, nzt+1
	3023	IF ( damp_level_1d <= zu(k) ) THEN
	3024	damp_level_ind_1d = k
	3025	EXIT
	3026	ENDIF
	3027	ENDDO
	3028	ENDIF
	3029	ENDIF
	3030	!
	3031	!-- Check some other 1d-model parameters
	3032	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3033	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
	3034	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
	3035	TRIM( mixing_length_1d ), '" is unknown'
	3036	CALL local_stop
	3037	ENDIF
	3038	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3039	TRIM( dissipation_1d ) /= 'detering' ) THEN
	3040	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
	3041	TRIM( dissipation_1d ), '" is unknown'
	3042	CALL local_stop
	3043	ENDIF
	3044
	3045	!
	3046	!-- Set time for the next user defined restart (time_restart is the
	3047	!-- internal parameter for steering restart events)
	3048	IF ( restart_time /= 9999999.9 ) THEN
	3049	IF ( restart_time > simulated_time ) time_restart = restart_time
	3050	ELSE
	3051	!
	3052	!-- In case of a restart run, set internal parameter to default (no restart)
	3053	!-- if the NAMELIST-parameter restart_time is omitted
	3054	time_restart = 9999999.9
	3055	ENDIF
	3056
	3057	!
	3058	!-- Set default value of the time needed to terminate a model run
	3059	IF ( termination_time_needed == -1.0 ) THEN
	3060	IF ( host(1:3) == 'ibm' ) THEN
	3061	termination_time_needed = 300.0
	3062	ELSE
	3063	termination_time_needed = 35.0
	3064	ENDIF
	3065	ENDIF
	3066
	3067	!
	3068	!-- Check the time needed to terminate a model run
	3069	IF ( host(1:3) == 't3e' ) THEN
	3070	!
	3071	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3072	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3073	IF ( termination_time_needed <= 30.0 ) THEN
	3074	IF ( myid == 0 ) THEN
	3075	PRINT*, '+++ check_parameters: termination_time_needed', &
	3076	termination_time_needed
	3077	PRINT*, ' must be > 30.0 on host "', host, &
	3078	'"'
	3079	ENDIF
	3080	CALL local_stop
	3081	ENDIF
	3082	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3083	!
	3084	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3085	!-- because the job time consumed before executing palm (for compiling,
	3086	!-- copying of files, etc.) has to be regarded
	3087	IF ( termination_time_needed < 300.0 ) THEN
	3088	IF ( myid == 0 ) THEN
	3089	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
	3090	'needed', termination_time_needed
	3091	PRINT*, ' should be >= 300.0', &
	3092	' on host "', host, '"'
	3093	ENDIF
	3094	ENDIF
	3095	ENDIF
	3096
	3097
	3098	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |