Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 170

Last change on this file since 170 was 153, checked in by steinfeld, 17 years ago
Update for the plant canopy model
Property svn:keywords set to `Id`
File size: 113.1 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[153]	6	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	7	! Case of reading data for recycling included in initializing_actions,
	8	! check of turbulent_inflow and calculation of recycling_plane
[139]	9	!
	10	! Former revisions:
	11	! -----------------
	12	! $Id: check_parameters.f90 153 2008-03-19 09:41:30Z raasch $
	13	!
	14	! 138 2007-11-28 10:03:58Z letzel
[138]	15	! Plant canopy added
[132]	16	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	17	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	18	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	19	!
	20	! 109 2007-08-28 15:26:47Z letzel
[102]	21	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	22	! conditions for temperature and fluxes) in case of coupled runs.
	23	! +profiles for wp and w"e
[104]	24	! Bugfix: Error message concerning output of particle concentration (pc)
	25	! modified
[108]	26	! More checks and more default values for coupled runs
	27	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	28	! cloud_physics = .T.)
	29	! Rayleigh damping for ocean fixed.
[109]	30	! Check and, if necessary, set default value for dt_coupling
[98]	31	!
	32	! 97 2007-06-21 08:23:15Z raasch
[97]	33	! Initial salinity profile is calculated, salinity boundary conditions are
	34	! checked,
[94]	35	! z_max_do1d is checked only in case of ocean = .f.,
[97]	36	! +initial temperature and geostrophic velocity profiles for the ocean version,
	37	! use_pt_reference renamed use_reference
[77]	38	!
[90]	39	! 89 2007-05-25 12:08:31Z raasch
	40	! Check for user-defined profiles
	41	!
[77]	42	! 75 2007-03-22 09:54:05Z raasch
[51]	43	! "by_user" allowed as initializing action, -data_output_ts,
[63]	44	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	45	! and pt_reference are checked, moisture renamed humidity,
[72]	46	! output of precipitation amount/rate and roughnes length + check
[73]	47	! possible negative humidities are avoided in initial profile,
[75]	48	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	49	! revision added to run_description_header
[1]	50	!
[39]	51	! 20 2007-02-26 00:12:32Z raasch
	52	! Temperature and humidity gradients at top are now calculated for nzt+1,
	53	! top_heatflux and respective boundary condition bc_pt_t is checked
	54	!
[3]	55	! RCS Log replace by Id keyword, revision history cleaned up
	56	!
[1]	57	! Revision 1.61 2006/08/04 14:20:25 raasch
	58	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	59	! use_upstream_for_tke, default value for dt_dopts,
	60	! generation of file header moved from routines palm and header to here
	61	!
	62	! Revision 1.1 1997/08/26 06:29:23 raasch
	63	! Initial revision
	64	!
	65	!
	66	! Description:
	67	! ------------
	68	! Check control parameters and deduce further quantities.
	69	!------------------------------------------------------------------------------!
	70
	71	USE arrays_3d
	72	USE constants
	73	USE control_parameters
	74	USE grid_variables
	75	USE indices
	76	USE model_1d
	77	USE netcdf_control
	78	USE particle_attributes
	79	USE pegrid
	80	USE profil_parameter
	81	USE statistics
	82	USE transpose_indices
	83
	84	IMPLICIT NONE
	85
	86	CHARACTER (LEN=1) :: sq
	87	CHARACTER (LEN=6) :: var
	88	CHARACTER (LEN=7) :: unit
	89	CHARACTER (LEN=8) :: date
	90	CHARACTER (LEN=10) :: time
[102]	91	CHARACTER (LEN=40) :: coupling_string
[1]	92	CHARACTER (LEN=100) :: action
	93
[108]	94	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
	95	position, prec
[1]	96	LOGICAL :: found, ldum
[108]	97	REAL :: gradient, maxn, maxp, remote = 0.0
[1]	98
	99	!
	100	!-- Warning, if host is not set
	101	IF ( host(1:1) == ' ' ) THEN
	102	IF ( myid == 0 ) THEN
	103	PRINT*, '+++ WARNING: check_parameters:'
	104	PRINT*, ' "host" is not set. Please check that environment', &
	105	' variable "localhost"'
	106	PRINT*, ' is set before running PALM'
	107	ENDIF
	108	ENDIF
	109
	110	!
[102]	111	!-- Check the coupling mode
	112	IF ( coupling_mode /= 'uncoupled' .AND. &
	113	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	114	coupling_mode /= 'ocean_to_atmosphere' ) THEN
	115	IF ( myid == 0 ) THEN
	116	PRINT*, '+++ check_parameters:'
	117	PRINT*, ' illegal coupling mode: ', TRIM( coupling_mode )
	118	ENDIF
	119	CALL local_stop
	120	ENDIF
	121
	122	!
[108]	123	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
	124	IF ( coupling_mode /= 'uncoupled' ) THEN
	125	IF ( dt_coupling == 9999999.9 ) THEN
	126	IF ( myid == 0 ) THEN
	127	PRINT*, '+++ check_parameters:'
	128	PRINT*, ' dt_coupling is not set but required for coupling ', &
	129	'mode: ', TRIM( coupling_mode )
	130	ENDIF
	131	CALL local_stop
	132	ENDIF
	133	#if defined( __parallel ) && defined( __mpi2 )
	134	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, myid, 11, comm_inter, ierr )
	135	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 11, comm_inter, status, ierr )
	136	IF ( dt_coupling /= remote ) THEN
	137	IF ( myid == 0 ) THEN
	138	PRINT*, '+++ check_parameters:'
	139	PRINT*, ' TRIM( coupling_mode ): dt_coupling = ', dt_coupling
	140	PRINT*, ' is not equal to dt_coupling_remote = ', remote
	141	ENDIF
	142	CALL local_stop
	143	ENDIF
[109]	144	IF ( dt_coupling <= 0.0 ) THEN
	145	CALL MPI_SEND( dt_max, 1, MPI_REAL, myid, 19, comm_inter, ierr )
	146	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 19, comm_inter, status, &
	147	ierr )
	148	dt_coupling = MAX( dt_max, remote )
	149	IF ( myid == 0 ) THEN
	150	PRINT*, '+++ check_parameters:'
	151	PRINT*, ' TRIM( coupling_mode ): dt_coupling <= 0.0'
	152	PRINT*, ' is not allowed and is reset to MAX(dt_max(A,O)) = ', &
	153	dt_coupling
	154	ENDIF
	155	ENDIF
[108]	156	CALL MPI_SEND( restart_time, 1, MPI_REAL, myid, 12, comm_inter, ierr )
	157	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 12, comm_inter, status, ierr )
	158	IF ( restart_time /= remote ) THEN
	159	IF ( myid == 0 ) THEN
	160	PRINT*, '+++ check_parameters:'
	161	PRINT*, ' TRIM( coupling_mode ): restart_time = ', restart_time
	162	PRINT*, ' is not equal to restart_time_remote = ', remote
	163	ENDIF
	164	CALL local_stop
	165	ENDIF
	166	CALL MPI_SEND( dt_restart, 1, MPI_REAL, myid, 13, comm_inter, ierr )
	167	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 13, comm_inter, status, ierr )
	168	IF ( dt_restart /= remote ) THEN
	169	IF ( myid == 0 ) THEN
	170	PRINT*, '+++ check_parameters:'
	171	PRINT*, ' TRIM( coupling_mode ): dt_restart = ', dt_restart
	172	PRINT*, ' is not equal to dt_restart_remote = ', remote
	173	ENDIF
	174	CALL local_stop
	175	ENDIF
	176	CALL MPI_SEND( end_time, 1, MPI_REAL, myid, 14, comm_inter, ierr )
	177	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 14, comm_inter, status, ierr )
	178	IF ( end_time /= remote ) THEN
	179	IF ( myid == 0 ) THEN
	180	PRINT*, '+++ check_parameters:'
	181	PRINT*, ' TRIM( coupling_mode ): end_time = ', end_time
	182	PRINT*, ' is not equal to end_time_remote = ', remote
	183	ENDIF
	184	CALL local_stop
	185	ENDIF
	186	CALL MPI_SEND( dx, 1, MPI_REAL, myid, 15, comm_inter, ierr )
	187	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 15, comm_inter, status, ierr )
	188	IF ( dx /= remote ) THEN
	189	IF ( myid == 0 ) THEN
	190	PRINT*, '+++ check_parameters:'
	191	PRINT*, ' TRIM( coupling_mode ): dx = ', dx
	192	PRINT*, ' is not equal to dx_remote = ', remote
	193	ENDIF
	194	CALL local_stop
	195	ENDIF
	196	CALL MPI_SEND( dy, 1, MPI_REAL, myid, 16, comm_inter, ierr )
	197	CALL MPI_RECV( remote, 1, MPI_REAL, myid, 16, comm_inter, status, ierr )
	198	IF ( dy /= remote ) THEN
	199	IF ( myid == 0 ) THEN
	200	PRINT*, '+++ check_parameters:'
	201	PRINT*, ' TRIM( coupling_mode ): dy = ', dy
	202	PRINT*, ' is not equal to dy_remote = ', remote
	203	ENDIF
	204	CALL local_stop
	205	ENDIF
	206	CALL MPI_SEND( nx, 1, MPI_INTEGER, myid, 17, comm_inter, ierr )
	207	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 17, comm_inter, status, &
	208	ierr )
	209	IF ( nx /= iremote ) THEN
	210	IF ( myid == 0 ) THEN
	211	PRINT*, '+++ check_parameters:'
	212	PRINT*, ' TRIM( coupling_mode ): nx = ', nx
	213	PRINT*, ' is not equal to nx_remote = ', iremote
	214	ENDIF
	215	CALL local_stop
	216	ENDIF
	217	CALL MPI_SEND( ny, 1, MPI_INTEGER, myid, 18, comm_inter, ierr )
	218	CALL MPI_RECV( iremote, 1, MPI_INTEGER, myid, 18, comm_inter, status, &
	219	ierr )
	220	IF ( ny /= iremote ) THEN
	221	IF ( myid == 0 ) THEN
	222	PRINT*, '+++ check_parameters:'
	223	PRINT*, ' TRIM( coupling_mode ): ny = ', ny
	224	PRINT*, ' is not equal to ny_remote = ', iremote
	225	ENDIF
	226	CALL local_stop
	227	ENDIF
	228	#endif
	229	ENDIF
	230
	231	#if defined( __parallel ) && defined( __mpi2 )
	232	!
	233	!-- Exchange via intercommunicator
	234	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	235	CALL MPI_SEND( humidity, &
	236	1, MPI_LOGICAL, myid, 19, comm_inter, ierr )
	237	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	238	CALL MPI_RECV( humidity_remote, &
	239	1, MPI_LOGICAL, myid, 19, comm_inter, status, ierr )
	240	ENDIF
	241	#endif
	242
	243
	244	!
[1]	245	!-- Generate the file header which is used as a header for most of PALM's
	246	!-- output files
	247	CALL DATE_AND_TIME( date, time )
	248	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	249	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	250	IF ( coupling_mode == 'uncoupled' ) THEN
	251	coupling_string = ''
	252	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	253	coupling_string = ' coupled (atmosphere)'
	254	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	255	coupling_string = ' coupled (ocean)'
	256	ENDIF
[1]	257
[102]	258	WRITE ( run_description_header, &
	259	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	260	TRIM( version ), TRIM( revision ), 'run: ', &
	261	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	262	'host: ', TRIM( host ), run_date, run_time
[1]	263
	264	!
[63]	265	!-- Check the general loop optimization method
	266	IF ( loop_optimization == 'default' ) THEN
	267	IF ( host(1:3) == 'nec' ) THEN
	268	loop_optimization = 'vector'
	269	ELSE
	270	loop_optimization = 'cache'
	271	ENDIF
	272	ENDIF
	273	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
	274	.AND. loop_optimization /= 'vector' ) THEN
	275	IF ( myid == 0 ) THEN
	276	PRINT*, '+++ check_parameters:'
	277	PRINT*, ' illegal value given for loop_optimization: ', &
	278	TRIM( loop_optimization )
	279	ENDIF
	280	CALL local_stop
	281	ENDIF
	282
	283	!
[1]	284	!-- Check topography setting (check for illegal parameter combinations)
	285	IF ( topography /= 'flat' ) THEN
	286	action = ' '
	287	IF ( scalar_advec /= 'pw-scheme' ) THEN
	288	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	289	ENDIF
	290	IF ( momentum_advec /= 'pw-scheme' ) THEN
	291	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	292	ENDIF
[51]	293	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	294	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	295	ENDIF
[114]	296	IF ( psolver == 'sor' ) THEN
[1]	297	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	298	ENDIF
	299	IF ( sloping_surface ) THEN
	300	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	301	ENDIF
	302	IF ( galilei_transformation ) THEN
	303	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	304	ENDIF
	305	IF ( cloud_physics ) THEN
	306	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	307	ENDIF
	308	IF ( cloud_droplets ) THEN
	309	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	310	ENDIF
[75]	311	IF ( humidity ) THEN
	312	WRITE( action, '(A)' ) 'humidity = .TRUE.'
[1]	313	ENDIF
	314	IF ( .NOT. prandtl_layer ) THEN
	315	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	316	ENDIF
	317	IF ( action /= ' ' ) THEN
	318	IF ( myid == 0 ) THEN
	319	PRINT*, '+++ check_parameters:'
	320	PRINT*, ' a non-flat topography does not allow ', TRIM( action )
	321	ENDIF
	322	CALL local_stop
	323	ENDIF
	324	ENDIF
[94]	325
[1]	326	!
[94]	327	!-- Check ocean setting
	328	IF ( ocean ) THEN
	329	action = ' '
	330	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
	331	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
	332	ENDIF
[97]	333	IF ( momentum_advec == 'ups-scheme' ) THEN
	334	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	335	ENDIF
[94]	336	IF ( action /= ' ' ) THEN
	337	IF ( myid == 0 ) THEN
	338	PRINT*, '+++ check_parameters:'
	339	PRINT*, ' ocean = .T. does not allow ', TRIM( action )
	340	ENDIF
	341	CALL local_stop
	342	ENDIF
	343	ENDIF
	344
	345	!
[1]	346	!-- Check whether there are any illegal values
	347	!-- Pressure solver:
	348	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	349	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
	350	IF ( myid == 0 ) THEN
	351	PRINT*, '+++ check_parameters:'
	352	PRINT*, ' unknown solver for perturbation pressure: psolver=', &
	353	psolver
	354	ENDIF
	355	CALL local_stop
	356	ENDIF
	357
	358	#if defined( __parallel )
	359	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
	360	IF ( myid == 0 ) THEN
	361	PRINT*, '+++ check_parameters:'
	362	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
	363	'1d domain-decomposition along x'
	364	PRINT*, ' please do not set npey/=1 in the parameter file'
	365	ENDIF
	366	CALL local_stop
	367	ENDIF
	368	IF ( ( psolver == 'poisfft_hybrid' .OR. psolver == 'multigrid' ) .AND. &
	369	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) ) THEN
	370	IF ( myid == 0 ) THEN
	371	PRINT*, '+++ check_parameters:'
	372	PRINT*, ' psolver="', TRIM( psolver ), '" does not work for ', &
	373	'subdomains with unequal size'
	374	PRINT*, ' please set grid_matching = ''strict'' in the parameter',&
	375	' file'
	376	ENDIF
	377	CALL local_stop
	378	ENDIF
	379	#else
	380	IF ( psolver == 'poisfft_hybrid' ) THEN
	381	IF ( myid == 0 ) THEN
	382	PRINT*, '+++ check_parameters:'
	383	PRINT*, ' psolver="', TRIM( psolver ), '" only works for a ', &
	384	'parallel environment'
	385	ENDIF
	386	CALL local_stop
	387	ENDIF
	388	#endif
	389
	390	IF ( psolver == 'multigrid' ) THEN
	391	IF ( cycle_mg == 'w' ) THEN
	392	gamma_mg = 2
	393	ELSEIF ( cycle_mg == 'v' ) THEN
	394	gamma_mg = 1
	395	ELSE
	396	IF ( myid == 0 ) THEN
	397	PRINT*, '+++ check_parameters:'
	398	PRINT*, ' unknown multigrid cycle: cycle_mg=', cycle_mg
	399	ENDIF
	400	CALL local_stop
	401	ENDIF
	402	ENDIF
	403
	404	IF ( fft_method /= 'singleton-algorithm' .AND. &
	405	fft_method /= 'temperton-algorithm' .AND. &
	406	fft_method /= 'system-specific' ) THEN
	407	IF ( myid == 0 ) THEN
	408	PRINT*, '+++ check_parameters:'
	409	PRINT*, ' unknown fft-algorithm: fft_method=', fft_method
	410	ENDIF
	411	CALL local_stop
	412	ENDIF
	413
	414	!
	415	!-- Advection schemes:
	416	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
	417	THEN
	418	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
	419	'scheme: momentum_advec=', momentum_advec
	420	CALL local_stop
	421	ENDIF
	422	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
	423	.AND. timestep_scheme /= 'euler' ) THEN
	424	IF ( myid == 0 ) PRINT*, '+++ check_parameters: momentum_advec=', &
	425	momentum_advec, ' is not allowed with ', &
	426	'timestep_scheme=', timestep_scheme
	427	CALL local_stop
	428	ENDIF
	429
	430	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
	431	scalar_advec /= 'ups-scheme' ) THEN
	432	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown advection ', &
	433	'scheme: scalar_advec=', scalar_advec
	434	CALL local_stop
	435	ENDIF
	436
	437	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	438	use_upstream_for_tke = .TRUE.
	439	IF ( myid == 0 ) THEN
	440	PRINT*, '+++ WARNING: check_parameters: use_upstream_for_tke set ', &
	441	'.TRUE. because use_sgs_for_particles = .TRUE.'
	442	ENDIF
	443	ENDIF
	444
	445	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
	446	IF ( myid == 0 ) THEN
	447	PRINT*, '+++ check_parameters: use_upstream_for_tke = .TRUE. ', &
	448	'not allowed with timestep_scheme=', timestep_scheme
	449	ENDIF
	450	CALL local_stop
	451	ENDIF
	452
	453	!
	454	!-- Timestep schemes:
	455	SELECT CASE ( TRIM( timestep_scheme ) )
	456
	457	CASE ( 'euler' )
	458	intermediate_timestep_count_max = 1
	459	asselin_filter_factor = 0.0
	460
	461	CASE ( 'leapfrog', 'leapfrog+euler' )
	462	intermediate_timestep_count_max = 1
	463
	464	CASE ( 'runge-kutta-2' )
	465	intermediate_timestep_count_max = 2
	466	asselin_filter_factor = 0.0
	467
	468	CASE ( 'runge-kutta-3' )
	469	intermediate_timestep_count_max = 3
	470	asselin_filter_factor = 0.0
	471
	472	CASE DEFAULT
	473	IF ( myid == 0 ) PRINT*, '+++ check_parameters: unknown timestep ',&
	474	'scheme: timestep_scheme=', timestep_scheme
	475	CALL local_stop
	476
	477	END SELECT
	478
[63]	479	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
[1]	480	THEN
	481	IF ( myid == 0 ) THEN
	482	PRINT*, '+++ check_parameters: scalar advection scheme "', &
	483	TRIM( scalar_advec ), '"'
	484	PRINT*, ' does not work with timestep_scheme "', &
	485	TRIM( timestep_scheme ), '"'
	486	ENDIF
	487	CALL local_stop
	488	ENDIF
	489
	490	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
	491	THEN
	492	IF ( myid == 0 ) THEN
	493	PRINT*, '+++ check_parameters: momentum advection scheme "', &
	494	TRIM( momentum_advec ), '"'
	495	PRINT*, ' does not work with timestep_scheme "', &
	496	TRIM( timestep_scheme ), '"'
	497	ENDIF
	498	CALL local_stop
	499	ENDIF
	500
	501
	502	IF ( initializing_actions == ' ' ) THEN
	503	IF ( myid == 0 ) THEN
	504	PRINT*, '+++ check parameters:'
	505	PRINT*, ' no value found for initializing_actions'
	506	ENDIF
	507	CALL local_stop
	508	ENDIF
	509
[147]	510	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	511	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
[1]	512	!
	513	!-- No model continuation run; several initialising actions are possible
	514	action = initializing_actions
	515	DO WHILE ( TRIM( action ) /= '' )
	516	position = INDEX( action, ' ' )
	517	SELECT CASE ( action(1:position-1) )
	518
	519	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	520	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	521	action = action(position+1:)
	522
	523	CASE DEFAULT
	524	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializi', &
	525	'ng_action unkown or not allowed: action = "', &
	526	TRIM(action), '"'
	527	CALL local_stop
	528
	529	END SELECT
	530	ENDDO
	531	ENDIF
	532	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	533	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	534	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
	535	'"set_constant_profiles" and "set_1d-model_profiles" are not', &
	536	' allowed simultaneously'
	537	CALL local_stop
	538	ENDIF
[46]	539	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	540	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
	541	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
	542	'"set_constant_profiles" and "by_user" are not', &
	543	' allowed simultaneously'
	544	CALL local_stop
	545	ENDIF
	546	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	547	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	548	IF ( myid == 0 ) PRINT*, '+++ check_parameters: initializing_actions', &
	549	'"by_user" and "set_1d-model_profiles" are not', &
	550	' allowed simultaneously'
	551	CALL local_stop
	552	ENDIF
[1]	553
[75]	554	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[72]	555	IF ( myid == 0 ) PRINT*, '+++ check_parameters: cloud_physics =', &
	556	cloud_physics, ' is not allowed with ', &
[75]	557	'humidity =', humidity
[1]	558	CALL local_stop
	559	ENDIF
	560
[72]	561	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
	562	IF ( myid == 0 ) PRINT*, '+++ check_parameters: precipitation =', &
	563	precipitation, ' is not allowed with ', &
	564	'cloud_physics =', cloud_physics
	565	CALL local_stop
	566	ENDIF
	567
[75]	568	IF ( humidity .AND. sloping_surface ) THEN
	569	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE', &
[1]	570	'and hang = TRUE are not', &
	571	' allowed simultaneously'
	572	CALL local_stop
	573	ENDIF
	574
[75]	575	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
[1]	576	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
[75]	577	'is not implemented for humidity'
[1]	578	CALL local_stop
	579	ENDIF
	580
[75]	581	IF ( passive_scalar .AND. humidity ) THEN
	582	IF ( myid == 0 ) PRINT*, '+++ check_parameters: humidity = TRUE and', &
[1]	583	'passive_scalar = TRUE is not allowed ', &
	584	'simultaneously'
	585	CALL local_stop
	586	ENDIF
	587
	588	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
	589	IF ( myid == 0 ) PRINT*, '+++ check_parameters: UPS-scheme', &
	590	'is not implemented for passive_scalar'
	591	CALL local_stop
	592	ENDIF
	593
	594	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
	595	IF ( myid == 0 ) PRINT*, '+++ check_parameters: illegal value "', &
	596	TRIM( grid_matching ), &
	597	'" found for parameter grid_matching'
	598	CALL local_stop
	599	ENDIF
	600
[138]	601	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
	602	IF ( myid == 0 ) PRINT*, '+++ check_parameters: plant_canopy = TRUE', &
	603	'requires a non-zero drag_coefficient'
	604	CALL local_stop
	605	ENDIF
	606
[1]	607	!
	608	!-- In case of no model continuation run, check initialising parameters and
	609	!-- deduce further quantities
	610	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	611
	612	!
	613	!-- Initial profiles for 1D and 3D model, respectively
	614	u_init = ug_surface
	615	v_init = vg_surface
	616	pt_init = pt_surface
[94]	617	IF ( humidity ) q_init = q_surface
	618	IF ( ocean ) sa_init = sa_surface
	619	IF ( passive_scalar ) q_init = s_surface
[138]	620	IF ( plant_canopy ) lad = 0.0
[1]	621
	622	!
	623	!--
	624	!-- If required, compute initial profile of the geostrophic wind
	625	!-- (component ug)
	626	i = 1
	627	gradient = 0.0
[97]	628
	629	IF ( .NOT. ocean ) THEN
	630
	631	ug_vertical_gradient_level_ind(1) = 0
	632	ug(0) = ug_surface
	633	DO k = 1, nzt+1
	634	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	635	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	636	gradient = ug_vertical_gradient(i) / 100.0
	637	ug_vertical_gradient_level_ind(i) = k - 1
	638	i = i + 1
	639	IF ( i > 10 ) THEN
	640	IF ( myid == 0 ) THEN
	641	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	642	' "ug_vertical_gradient_level_ind" exceeded'
	643	ENDIF
	644	CALL local_stop
[1]	645	ENDIF
	646	ENDIF
[97]	647	IF ( gradient /= 0.0 ) THEN
	648	IF ( k /= 1 ) THEN
	649	ug(k) = ug(k-1) + dzu(k) * gradient
	650	ELSE
	651	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	652	ENDIF
[1]	653	ELSE
[97]	654	ug(k) = ug(k-1)
[1]	655	ENDIF
[97]	656	ENDDO
[1]	657
[97]	658	ELSE
	659
	660	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	661	ug(nzt+1) = ug_surface
[97]	662	DO k = nzt, 0, -1
	663	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	664	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	665	gradient = ug_vertical_gradient(i) / 100.0
	666	ug_vertical_gradient_level_ind(i) = k + 1
	667	i = i + 1
	668	IF ( i > 10 ) THEN
	669	IF ( myid == 0 ) THEN
	670	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	671	' "ug_vertical_gradient_level_ind" exceeded'
	672	ENDIF
	673	CALL local_stop
	674	ENDIF
	675	ENDIF
	676	IF ( gradient /= 0.0 ) THEN
	677	IF ( k /= nzt ) THEN
	678	ug(k) = ug(k+1) - dzu(k+1) * gradient
	679	ELSE
	680	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	681	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	682	ENDIF
	683	ELSE
	684	ug(k) = ug(k+1)
	685	ENDIF
	686	ENDDO
	687
	688	ENDIF
	689
[1]	690	u_init = ug
	691
	692	!
	693	!-- In case of no given gradients for ug, choose a vanishing gradient
[97]	694	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	695	ug_vertical_gradient_level(1) = 0.0
	696	ENDIF
	697
	698	!
	699	!--
	700	!-- If required, compute initial profile of the geostrophic wind
	701	!-- (component vg)
	702	i = 1
	703	gradient = 0.0
[97]	704
	705	IF ( .NOT. ocean ) THEN
	706
	707	vg_vertical_gradient_level_ind(1) = 0
	708	vg(0) = vg_surface
	709	DO k = 1, nzt+1
	710	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	711	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	712	gradient = vg_vertical_gradient(i) / 100.0
	713	vg_vertical_gradient_level_ind(i) = k - 1
	714	i = i + 1
	715	IF ( i > 10 ) THEN
	716	IF ( myid == 0 ) THEN
	717	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	718	' "vg_vertical_gradient_level_ind" exceeded'
	719	ENDIF
	720	CALL local_stop
[1]	721	ENDIF
	722	ENDIF
[97]	723	IF ( gradient /= 0.0 ) THEN
	724	IF ( k /= 1 ) THEN
	725	vg(k) = vg(k-1) + dzu(k) * gradient
	726	ELSE
	727	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	728	ENDIF
[1]	729	ELSE
[97]	730	vg(k) = vg(k-1)
[1]	731	ENDIF
[97]	732	ENDDO
[1]	733
[97]	734	ELSE
	735
[121]	736	vg_vertical_gradient_level_ind(1) = nzt+1
	737	vg(nzt+1) = vg_surface
[97]	738	DO k = nzt, 0, -1
	739	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	740	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	741	gradient = vg_vertical_gradient(i) / 100.0
	742	vg_vertical_gradient_level_ind(i) = k + 1
	743	i = i + 1
	744	IF ( i > 10 ) THEN
	745	IF ( myid == 0 ) THEN
	746	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	747	' "vg_vertical_gradient_level_ind" exceeded'
	748	ENDIF
	749	CALL local_stop
	750	ENDIF
	751	ENDIF
	752	IF ( gradient /= 0.0 ) THEN
	753	IF ( k /= nzt ) THEN
	754	vg(k) = vg(k+1) - dzu(k+1) * gradient
	755	ELSE
	756	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	757	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	758	ENDIF
	759	ELSE
	760	vg(k) = vg(k+1)
	761	ENDIF
	762	ENDDO
	763
	764	ENDIF
	765
[1]	766	v_init = vg
	767
	768	!
	769	!-- In case of no given gradients for vg, choose a vanishing gradient
[97]	770	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	771	vg_vertical_gradient_level(1) = 0.0
	772	ENDIF
	773
	774	!
[94]	775	!-- Compute initial temperature profile using the given temperature gradients
[1]	776	i = 1
	777	gradient = 0.0
[94]	778
	779	IF ( .NOT. ocean ) THEN
	780
	781	pt_vertical_gradient_level_ind(1) = 0
	782	DO k = 1, nzt+1
	783	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	784	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	785	gradient = pt_vertical_gradient(i) / 100.0
	786	pt_vertical_gradient_level_ind(i) = k - 1
	787	i = i + 1
	788	IF ( i > 10 ) THEN
	789	IF ( myid == 0 ) THEN
	790	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	791	' "pt_vertical_gradient_level_ind" exceeded'
	792	ENDIF
	793	CALL local_stop
[1]	794	ENDIF
	795	ENDIF
[94]	796	IF ( gradient /= 0.0 ) THEN
	797	IF ( k /= 1 ) THEN
	798	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	799	ELSE
	800	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	801	ENDIF
[1]	802	ELSE
[94]	803	pt_init(k) = pt_init(k-1)
[1]	804	ENDIF
[94]	805	ENDDO
[1]	806
[94]	807	ELSE
	808
	809	pt_vertical_gradient_level_ind(1) = nzt+1
	810	DO k = nzt, 0, -1
	811	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	812	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	813	gradient = pt_vertical_gradient(i) / 100.0
	814	pt_vertical_gradient_level_ind(i) = k + 1
	815	i = i + 1
	816	IF ( i > 10 ) THEN
	817	IF ( myid == 0 ) THEN
	818	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	819	' "pt_vertical_gradient_level_ind" exceeded'
	820	ENDIF
	821	CALL local_stop
	822	ENDIF
	823	ENDIF
	824	IF ( gradient /= 0.0 ) THEN
	825	IF ( k /= nzt ) THEN
	826	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	827	ELSE
	828	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	829	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	830	ENDIF
	831	ELSE
	832	pt_init(k) = pt_init(k+1)
	833	ENDIF
	834	ENDDO
	835
	836	ENDIF
	837
[1]	838	!
	839	!-- In case of no given temperature gradients, choose gradient of neutral
	840	!-- stratification
[94]	841	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	842	pt_vertical_gradient_level(1) = 0.0
	843	ENDIF
	844
	845	!
[94]	846	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	847	!-- boundary condition
[19]	848	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	849
	850	!
	851	!-- If required, compute initial humidity or scalar profile using the given
	852	!-- humidity/scalar gradient. In case of scalar transport, initially store
	853	!-- values of the scalar parameters on humidity parameters
	854	IF ( passive_scalar ) THEN
	855	bc_q_b = bc_s_b
	856	bc_q_t = bc_s_t
	857	q_surface = s_surface
	858	q_surface_initial_change = s_surface_initial_change
	859	q_vertical_gradient = s_vertical_gradient
	860	q_vertical_gradient_level = s_vertical_gradient_level
	861	surface_waterflux = surface_scalarflux
	862	ENDIF
	863
[75]	864	IF ( humidity .OR. passive_scalar ) THEN
[1]	865
	866	i = 1
	867	gradient = 0.0
	868	q_vertical_gradient_level_ind(1) = 0
	869	DO k = 1, nzt+1
	870	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	871	q_vertical_gradient_level(i) >= 0.0 ) THEN
	872	gradient = q_vertical_gradient(i) / 100.0
	873	q_vertical_gradient_level_ind(i) = k - 1
	874	i = i + 1
	875	IF ( i > 10 ) THEN
	876	IF ( myid == 0 ) THEN
	877	PRINT*, '+++ check_parameters: upper bound 10 of arr', &
	878	'ay "q_vertical_gradient_level_ind" exceeded'
	879	ENDIF
	880	CALL local_stop
	881	ENDIF
	882	ENDIF
	883	IF ( gradient /= 0.0 ) THEN
	884	IF ( k /= 1 ) THEN
	885	q_init(k) = q_init(k-1) + dzu(k) * gradient
	886	ELSE
	887	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	888	ENDIF
	889	ELSE
	890	q_init(k) = q_init(k-1)
	891	ENDIF
[72]	892	!
	893	!-- Avoid negative humidities
	894	IF ( q_init(k) < 0.0 ) THEN
	895	q_init(k) = 0.0
	896	ENDIF
[1]	897	ENDDO
	898
	899	!
	900	!-- In case of no given humidity gradients, choose zero gradient
	901	!-- conditions
	902	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	903	q_vertical_gradient_level(1) = 0.0
	904	ENDIF
	905
	906	!
	907	!-- Store humidity gradient at the top boundary for possile Neumann
	908	!-- boundary condition
[19]	909	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	910
	911	ENDIF
	912
[94]	913	!
	914	!-- If required, compute initial salinity profile using the given salinity
	915	!-- gradients
	916	IF ( ocean ) THEN
	917
	918	i = 1
	919	gradient = 0.0
	920
	921	sa_vertical_gradient_level_ind(1) = nzt+1
	922	DO k = nzt, 0, -1
	923	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	924	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	925	gradient = sa_vertical_gradient(i) / 100.0
	926	sa_vertical_gradient_level_ind(i) = k + 1
	927	i = i + 1
	928	IF ( i > 10 ) THEN
	929	IF ( myid == 0 ) THEN
	930	PRINT*, '+++ check_parameters: upper bound 10 of array', &
	931	' "sa_vertical_gradient_level_ind" exceeded'
	932	ENDIF
	933	CALL local_stop
	934	ENDIF
	935	ENDIF
	936	IF ( gradient /= 0.0 ) THEN
	937	IF ( k /= nzt ) THEN
	938	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	939	ELSE
	940	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	941	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	942	ENDIF
	943	ELSE
	944	sa_init(k) = sa_init(k+1)
	945	ENDIF
	946	ENDDO
	947
	948	ENDIF
	949
[138]	950	!
	951	!-- If required compute the profile of leaf area density used in the plant canopy model
	952	IF ( plant_canopy ) THEN
	953
	954	i = 1
	955	gradient = 0.0
[1]	956
[138]	957	IF ( .NOT. ocean ) THEN
[153]	958
	959	lad(0) = lad_surface
[138]	960
	961	lad_vertical_gradient_level_ind(1) = 0
	962	DO k = 1, pch_index
	963	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	964	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	965	gradient = lad_vertical_gradient(i)
	966	lad_vertical_gradient_level_ind(i) = k - 1
	967	i = i + 1
	968	IF ( i > 10 ) THEN
	969	IF ( myid == 0 ) THEN
	970	PRINT*, '+++ user_init_3d_model: upper bound 10 of array', &
	971	' "lad_vertical_gradient_level" exceeded'
	972	ENDIF
	973	CALL local_stop
	974	ENDIF
	975	ENDIF
	976	IF ( gradient /= 0.0 ) THEN
	977	IF ( k /= 1 ) THEN
	978	lad(k) = lad(k-1) + dzu(k) * gradient
	979	ELSE
	980	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	981	ENDIF
	982	ELSE
	983	lad(k) = lad(k-1)
	984	ENDIF
	985	ENDDO
	986
	987	ENDIF
	988
[1]	989	!
[138]	990	!-- In case of no given leaf area density gradients, choose a vanishing gradient
	991	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	992	lad_vertical_gradient_level(1) = 0.0
	993	ENDIF
	994
	995	ENDIF
	996
	997	ENDIF
	998
	999	!
[1]	1000	!-- Compute Coriolis parameter
	1001	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1002	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1003
	1004	!
[97]	1005	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1006	!-- set the reference temperature equal to the surface temperature.
	1007	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1008
	1009	!
[97]	1010	!-- Reference value has to be used in buoyancy terms
	1011	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1012
	1013	!
	1014	!-- Sign of buoyancy/stability terms
	1015	IF ( ocean ) atmos_ocean_sign = -1.0
	1016
	1017	!
[108]	1018	!-- Ocean version must use flux boundary conditions at the top
	1019	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
	1020	IF ( myid == 0 ) PRINT*, '+++ check_parameters: use_top_fluxes ',&
	1021	'must be .TRUE. in ocean version'
	1022	CALL local_stop
	1023	ENDIF
[97]	1024
	1025	!
[1]	1026	!-- In case of a given slope, compute the relevant quantities
	1027	IF ( alpha_surface /= 0.0 ) THEN
	1028	IF ( ABS( alpha_surface ) > 90.0 ) THEN
	1029	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ABS( alpha_surface',&
	1030	'=', alpha_surface, ' ) must be < 90.0'
	1031	CALL local_stop
	1032	ENDIF
	1033	sloping_surface = .TRUE.
	1034	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1035	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1036	ENDIF
	1037
	1038	!
	1039	!-- Check time step and cfl_factor
	1040	IF ( dt /= -1.0 ) THEN
	1041	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
	1042	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dt=', dt, ' <= 0.0'
	1043	CALL local_stop
	1044	ENDIF
	1045	dt_3d = dt
	1046	dt_fixed = .TRUE.
	1047	ENDIF
	1048
	1049	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1050	IF ( cfl_factor == -1.0 ) THEN
	1051	IF ( momentum_advec == 'ups-scheme' .OR. &
	1052	scalar_advec == 'ups-scheme' ) THEN
	1053	cfl_factor = 0.8
	1054	ELSE
	1055	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
	1056	cfl_factor = 0.8
	1057	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1058	cfl_factor = 0.9
	1059	ELSE
	1060	cfl_factor = 0.1
	1061	ENDIF
	1062	ENDIF
	1063	ELSE
	1064	IF ( myid == 0 ) THEN
	1065	PRINT*, '+++ check_parameters: cfl_factor=', cfl_factor, &
	1066	' out of range'
	1067	PRINT*, '+++ 0.0 < cfl_factor <= 1.0 is required'
	1068	ENDIF
	1069	CALL local_stop
	1070	ENDIF
	1071	ENDIF
	1072
	1073	!
	1074	!-- Store simulated time at begin
	1075	simulated_time_at_begin = simulated_time
	1076
	1077	!
	1078	!-- Set wind speed in the Galilei-transformed system
	1079	IF ( galilei_transformation ) THEN
	1080	IF ( use_ug_for_galilei_tr .AND. &
	1081	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1082	vg_vertical_gradient_level(1) == 0.0 ) THEN
	1083	u_gtrans = ug_surface
	1084	v_gtrans = vg_surface
	1085	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1086	ug_vertical_gradient_level(1) /= 0.0 ) THEN
	1087	IF ( myid == 0 ) THEN
	1088	PRINT*, '+++ check_parameters:'
	1089	PRINT*, ' baroclinicity (ug) not allowed'
	1090	PRINT*, ' simultaneously with galilei transformation'
	1091	ENDIF
	1092	CALL local_stop
	1093	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1094	vg_vertical_gradient_level(1) /= 0.0 ) THEN
	1095	IF ( myid == 0 ) THEN
	1096	PRINT*, '+++ check_parameters:'
	1097	PRINT*, ' baroclinicity (vg) not allowed'
	1098	PRINT*, ' simultaneously with galilei transformation'
	1099	ENDIF
	1100	CALL local_stop
	1101	ELSE
	1102	IF ( myid == 0 ) THEN
	1103	PRINT*, '+++ WARNING: check_parameters:'
	1104	PRINT*, ' variable translation speed used for galilei-tran' // &
	1105	'sformation, which'
	1106	PRINT*, ' may cause instabilities in stably stratified regions'
	1107	ENDIF
	1108	ENDIF
	1109	ENDIF
	1110
	1111	!
	1112	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1113	!-- fluxes have to be used in the diffusion-terms
	1114	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1115
	1116	!
	1117	!-- Check boundary conditions and set internal variables:
	1118	!-- Lateral boundary conditions
[73]	1119	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
	1120	bc_lr /= 'radiation/dirichlet' ) THEN
[1]	1121	IF ( myid == 0 ) THEN
	1122	PRINT*, '+++ check_parameters:'
	1123	PRINT*, ' unknown boundary condition: bc_lr = ', bc_lr
	1124	ENDIF
	1125	CALL local_stop
	1126	ENDIF
[73]	1127	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
	1128	bc_ns /= 'radiation/dirichlet' ) THEN
[1]	1129	IF ( myid == 0 ) THEN
	1130	PRINT*, '+++ check_parameters:'
	1131	PRINT*, ' unknown boundary condition: bc_ns = ', bc_ns
	1132	ENDIF
	1133	CALL local_stop
	1134	ENDIF
	1135
	1136	!
	1137	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
	1138	!-- Willimas advection scheme. Several schemes and tools do not work with
	1139	!-- non-cyclic boundary conditions.
	1140	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1141	IF ( psolver /= 'multigrid' ) THEN
	1142	IF ( myid == 0 ) THEN
	1143	PRINT*, '+++ check_parameters:'
	1144	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1145	' psolver = ', psolver
	1146	ENDIF
	1147	CALL local_stop
	1148	ENDIF
	1149	IF ( momentum_advec /= 'pw-scheme' ) THEN
	1150	IF ( myid == 0 ) THEN
	1151	PRINT*, '+++ check_parameters:'
	1152	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1153	' momentum_advec = ', momentum_advec
	1154	ENDIF
	1155	CALL local_stop
	1156	ENDIF
	1157	IF ( scalar_advec /= 'pw-scheme' ) THEN
	1158	IF ( myid == 0 ) THEN
	1159	PRINT*, '+++ check_parameters:'
	1160	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1161	' scalar_advec = ', scalar_advec
	1162	ENDIF
	1163	CALL local_stop
	1164	ENDIF
	1165	IF ( galilei_transformation ) THEN
	1166	IF ( myid == 0 ) THEN
	1167	PRINT*, '+++ check_parameters:'
	1168	PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1169	' galilei_transformation = .T.'
	1170	ENDIF
	1171	CALL local_stop
	1172	ENDIF
[75]	1173	! IF ( conserve_volume_flow ) THEN
	1174	! IF ( myid == 0 ) THEN
	1175	! PRINT*, '+++ check_parameters:'
	1176	! PRINT*, ' non-cyclic lateral boundaries do not allow', &
	1177	! ' conserve_volume_flow = .T.'
	1178	! ENDIF
	1179	! CALL local_stop
	1180	! ENDIF
[1]	1181	ENDIF
	1182
	1183	!
	1184	!-- Bottom boundary condition for the turbulent Kinetic energy
	1185	IF ( bc_e_b == 'neumann' ) THEN
	1186	ibc_e_b = 1
	1187	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
	1188	IF ( myid == 0 ) THEN
	1189	PRINT*, '+++ WARNING: check_parameters:'
	1190	PRINT*, ' adjust_mixing_length = TRUE and bc_e_b = ', bc_e_b
	1191	ENDIF
	1192	ENDIF
	1193	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1194	ibc_e_b = 2
	1195	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
	1196	IF ( myid == 0 ) THEN
	1197	PRINT*, '+++ WARNING: check_parameters:'
	1198	PRINT*, ' adjust_mixing_length = FALSE and bc_e_b = ', bc_e_b
	1199	ENDIF
	1200	ENDIF
	1201	IF ( .NOT. prandtl_layer ) THEN
	1202	bc_e_b = 'neumann'
	1203	ibc_e_b = 1
	1204	IF ( myid == 0 ) THEN
	1205	PRINT*, '+++ WARNING: check_parameters:'
	1206	PRINT*, ' boundary condition bc_e_b changed to "', bc_e_b, '"'
	1207	ENDIF
	1208	ENDIF
	1209	ELSE
	1210	IF ( myid == 0 ) THEN
	1211	PRINT*, '+++ check_parameters:'
	1212	PRINT*, ' unknown boundary condition: bc_e_b = ', bc_e_b
	1213	ENDIF
	1214	CALL local_stop
	1215	ENDIF
	1216
	1217	!
	1218	!-- Boundary conditions for perturbation pressure
	1219	IF ( bc_p_b == 'dirichlet' ) THEN
	1220	ibc_p_b = 0
	1221	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1222	ibc_p_b = 1
	1223	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1224	ibc_p_b = 2
	1225	ELSE
	1226	IF ( myid == 0 ) THEN
	1227	PRINT*, '+++ check_parameters:'
	1228	PRINT*, ' unknown boundary condition: bc_p_b = ', bc_p_b
	1229	ENDIF
	1230	CALL local_stop
	1231	ENDIF
	1232	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
	1233	IF ( myid == 0 ) THEN
	1234	PRINT*, '+++ check_parameters:'
	1235	PRINT*, ' boundary condition: bc_p_b = ', TRIM( bc_p_b ), &
	1236	' not allowed with'
	1237	PRINT*, ' prandtl_layer = .FALSE.'
	1238	ENDIF
	1239	CALL local_stop
	1240	ENDIF
	1241	IF ( bc_p_t == 'dirichlet' ) THEN
	1242	ibc_p_t = 0
	1243	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1244	ibc_p_t = 1
	1245	ELSE
	1246	IF ( myid == 0 ) THEN
	1247	PRINT*, '+++ check_parameters:'
	1248	PRINT*, ' unknown boundary condition: bc_p_t = ', bc_p_t
	1249	ENDIF
	1250	CALL local_stop
	1251	ENDIF
	1252
	1253	!
	1254	!-- Boundary conditions for potential temperature
[102]	1255	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1256	ibc_pt_b = 2
[1]	1257	ELSE
[102]	1258	IF ( bc_pt_b == 'dirichlet' ) THEN
	1259	ibc_pt_b = 0
	1260	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1261	ibc_pt_b = 1
	1262	ELSE
	1263	IF ( myid == 0 ) THEN
	1264	PRINT*, '+++ check_parameters:'
	1265	PRINT*, ' unknown boundary condition: bc_pt_b = ', bc_pt_b
	1266	ENDIF
	1267	CALL local_stop
[1]	1268	ENDIF
	1269	ENDIF
[102]	1270
[1]	1271	IF ( bc_pt_t == 'dirichlet' ) THEN
	1272	ibc_pt_t = 0
	1273	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1274	ibc_pt_t = 1
[19]	1275	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1276	ibc_pt_t = 2
[1]	1277	ELSE
	1278	IF ( myid == 0 ) THEN
	1279	PRINT*, '+++ check_parameters:'
	1280	PRINT*, ' unknown boundary condition: bc_pt_t = ', bc_pt_t
	1281	ENDIF
	1282	CALL local_stop
	1283	ENDIF
	1284
[20]	1285	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1286	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[103]	1287	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1288	top_momentumflux_v /= 9999999.9 ) THEN
	1289	constant_top_momentumflux = .TRUE.
	1290	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
	1291	top_momentumflux_v == 9999999.9 ) ) THEN
	1292	IF ( myid == 0 ) THEN
	1293	PRINT*, '+++ check_parameters:'
	1294	PRINT*, ' both, top_momentumflux_u AND top_momentumflux_v'
	1295	PRINT*, ' must be set'
	1296	ENDIF
	1297	CALL local_stop
	1298	ENDIF
[1]	1299
	1300	!
	1301	!-- A given surface temperature implies Dirichlet boundary condition for
	1302	!-- temperature. In this case specification of a constant heat flux is
	1303	!-- forbidden.
	1304	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1305	surface_heatflux /= 0.0 ) THEN
	1306	IF ( myid == 0 ) THEN
	1307	PRINT*, '+++ check_parameters:'
	1308	PRINT*, ' boundary_condition: bc_pt_b = ', bc_pt_b
	1309	PRINT*, ' is not allowed with constant_heatflux = .TRUE.'
	1310	ENDIF
	1311	CALL local_stop
	1312	ENDIF
	1313	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
	1314	IF ( myid == 0 ) THEN
	1315	PRINT*, '+++ check_parameters: constant_heatflux = .TRUE. is not'
	1316	PRINT*, ' allowed with pt_surface_initial_change (/=0) = ', &
	1317	pt_surface_initial_change
	1318	ENDIF
	1319	CALL local_stop
	1320	ENDIF
	1321
	1322	!
[19]	1323	!-- A given temperature at the top implies Dirichlet boundary condition for
	1324	!-- temperature. In this case specification of a constant heat flux is
	1325	!-- forbidden.
	1326	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1327	top_heatflux /= 0.0 ) THEN
	1328	IF ( myid == 0 ) THEN
	1329	PRINT*, '+++ check_parameters:'
	1330	PRINT*, ' boundary_condition: bc_pt_t = ', bc_pt_t
	1331	PRINT*, ' is not allowed with constant_top_heatflux = .TRUE.'
	1332	ENDIF
	1333	CALL local_stop
	1334	ENDIF
	1335
	1336	!
[95]	1337	!-- Boundary conditions for salinity
	1338	IF ( ocean ) THEN
	1339	IF ( bc_sa_t == 'dirichlet' ) THEN
	1340	ibc_sa_t = 0
	1341	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1342	ibc_sa_t = 1
	1343	ELSE
	1344	IF ( myid == 0 ) THEN
	1345	PRINT*, '+++ check_parameters:'
	1346	PRINT*, ' unknown boundary condition: bc_sa_t = ', bc_sa_t
	1347	ENDIF
	1348	CALL local_stop
	1349	ENDIF
	1350
	1351	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1352	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
	1353	IF ( myid == 0 ) THEN
	1354	PRINT*, '+++ check_parameters:'
	1355	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
	1356	PRINT*, ' requires to set top_salinityflux '
	1357	ENDIF
	1358	CALL local_stop
	1359	ENDIF
[95]	1360
	1361	!
	1362	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1363	!-- salinity. In this case specification of a constant salinity flux is
	1364	!-- forbidden.
	1365	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1366	top_salinityflux /= 0.0 ) THEN
	1367	IF ( myid == 0 ) THEN
	1368	PRINT*, '+++ check_parameters:'
	1369	PRINT*, ' boundary_condition: bc_sa_t = ', bc_sa_t
	1370	PRINT*, ' is not allowed with constant_top_salinityflux = ', &
	1371	'.TRUE.'
	1372	ENDIF
	1373	CALL local_stop
	1374	ENDIF
	1375
	1376	ENDIF
	1377
	1378	!
[75]	1379	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1380	!-- water content / scalar
[75]	1381	IF ( humidity .OR. passive_scalar ) THEN
	1382	IF ( humidity ) THEN
[1]	1383	sq = 'q'
	1384	ELSE
	1385	sq = 's'
	1386	ENDIF
	1387	IF ( bc_q_b == 'dirichlet' ) THEN
	1388	ibc_q_b = 0
	1389	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1390	ibc_q_b = 1
	1391	ELSE
	1392	IF ( myid == 0 ) THEN
	1393	PRINT*, '+++ check_parameters:'
	1394	PRINT*, ' unknown boundary condition: bc_', sq, '_b = ', bc_q_b
	1395	ENDIF
	1396	CALL local_stop
	1397	ENDIF
	1398	IF ( bc_q_t == 'dirichlet' ) THEN
	1399	ibc_q_t = 0
	1400	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1401	ibc_q_t = 1
	1402	ELSE
	1403	IF ( myid == 0 ) THEN
	1404	PRINT*, '+++ check_parameters:'
	1405	PRINT*, ' unknown boundary condition: bc_', sq, '_t = ', bc_q_t
	1406	ENDIF
	1407	CALL local_stop
	1408	ENDIF
	1409
	1410	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
	1411
	1412	!
	1413	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1414	!-- humidity. In this case specification of a constant water flux is
[1]	1415	!-- forbidden.
	1416	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
	1417	IF ( myid == 0 ) THEN
	1418	PRINT*, '+++ check_parameters:'
	1419	PRINT*, ' boundary_condition: bc_', sq, '_b = ', bc_q_b
	1420	PRINT*, ' is not allowed with prescribed surface flux'
	1421	ENDIF
	1422	CALL local_stop
	1423	ENDIF
	1424	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
	1425	IF ( myid == 0 ) THEN
	1426	PRINT*, '+++ check_parameters: a prescribed surface flux is not'
	1427	PRINT*, ' allowed with ', sq, '_surface_initial_change (/=0)', &
	1428	' = ', q_surface_initial_change
	1429	ENDIF
	1430	CALL local_stop
	1431	ENDIF
	1432
	1433	ENDIF
	1434
	1435	!
	1436	!-- Boundary conditions for horizontal components of wind speed
	1437	IF ( bc_uv_b == 'dirichlet' ) THEN
	1438	ibc_uv_b = 0
	1439	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1440	ibc_uv_b = 1
	1441	IF ( prandtl_layer ) THEN
	1442	IF ( myid == 0 ) THEN
	1443	PRINT*, '+++ check_parameters:'
	1444	PRINT*, ' boundary condition: bc_uv_b = ', TRIM( bc_uv_b ), &
	1445	' is not allowed with'
	1446	PRINT*, ' prandtl_layer = .TRUE.'
	1447	ENDIF
	1448	CALL local_stop
	1449	ENDIF
	1450	ELSE
	1451	IF ( myid == 0 ) THEN
	1452	PRINT*, '+++ check_parameters:'
	1453	PRINT*, ' unknown boundary condition: bc_uv_b = ', bc_uv_b
	1454	ENDIF
	1455	CALL local_stop
	1456	ENDIF
[108]	1457	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1458	bc_uv_t = 'neumann'
[1]	1459	ibc_uv_t = 1
	1460	ELSE
[132]	1461	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1462	ibc_uv_t = 0
	1463	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1464	ibc_uv_t = 1
	1465	ELSE
	1466	IF ( myid == 0 ) THEN
	1467	PRINT*, '+++ check_parameters:'
	1468	PRINT*, ' unknown boundary condition: bc_uv_t = ', bc_uv_t
	1469	ENDIF
	1470	CALL local_stop
[1]	1471	ENDIF
	1472	ENDIF
	1473
	1474	!
	1475	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1476	IF ( rayleigh_damping_factor == -1.0 ) THEN
	1477	IF ( momentum_advec == 'ups-scheme' ) THEN
	1478	rayleigh_damping_factor = 0.01
	1479	ELSE
	1480	rayleigh_damping_factor = 0.0
	1481	ENDIF
	1482	ELSE
	1483	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1484	THEN
	1485	IF ( myid == 0 ) THEN
	1486	PRINT*, '+++ check_parameters:'
	1487	PRINT*, ' rayleigh_damping_factor = ', rayleigh_damping_factor,&
	1488	' out of range [0.0,1.0]'
	1489	ENDIF
	1490	CALL local_stop
	1491	ENDIF
	1492	ENDIF
	1493
	1494	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1495	IF ( .NOT. ocean ) THEN
	1496	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1497	ELSE
	1498	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1499	ENDIF
[1]	1500	ELSE
[108]	1501	IF ( .NOT. ocean ) THEN
	1502	IF ( rayleigh_damping_height < 0.0 .OR. &
	1503	rayleigh_damping_height > zu(nzt) ) THEN
	1504	IF ( myid == 0 ) THEN
	1505	PRINT*, '+++ check_parameters:'
	1506	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
	1507	' out of range [0.0,', zu(nzt), ']'
	1508	ENDIF
	1509	CALL local_stop
[1]	1510	ENDIF
[108]	1511	ELSE
	1512	IF ( rayleigh_damping_height > 0.0 .OR. &
	1513	rayleigh_damping_height < zu(nzb) ) THEN
	1514	IF ( myid == 0 ) THEN
	1515	PRINT*, '+++ check_parameters:'
	1516	PRINT*, ' rayleigh_damping_height = ', rayleigh_damping_height,&
	1517	' out of range [0.0,', zu(nzb), ']'
	1518	ENDIF
	1519	CALL local_stop
	1520	ENDIF
[1]	1521	ENDIF
	1522	ENDIF
	1523
	1524	!
	1525	!-- Check limiters for Upstream-Spline scheme
	1526	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
	1527	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
	1528	overshoot_limit_e < 0.0 ) THEN
	1529	IF ( myid == 0 ) THEN
	1530	PRINT*, '+++ check_parameters:'
	1531	PRINT*, ' overshoot_limit_... < 0.0 is not allowed'
	1532	ENDIF
	1533	CALL local_stop
	1534	ENDIF
	1535	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
	1536	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
	1537	IF ( myid == 0 ) THEN
	1538	PRINT*, '+++ check_parameters:'
	1539	PRINT*, ' ups_limit_... < 0.0 is not allowed'
	1540	ENDIF
	1541	CALL local_stop
	1542	ENDIF
	1543
	1544	!
	1545	!-- Check number of chosen statistic regions. More than 10 regions are not
	1546	!-- allowed, because so far no more than 10 corresponding output files can
	1547	!-- be opened (cf. check_open)
	1548	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
	1549	IF ( myid == 0 ) THEN
	1550	PRINT*, '+++ check_parameters: Number of statistic_regions = ', &
	1551	statistic_regions+1
	1552	PRINT*, ' Only 10 regions are allowed'
	1553	ENDIF
	1554	CALL local_stop
	1555	ENDIF
	1556	IF ( normalizing_region > statistic_regions .OR. &
	1557	normalizing_region < 0) THEN
	1558	IF ( myid == 0 ) THEN
	1559	PRINT*, '+++ check_parameters: normalizing_region = ', &
	1560	normalizing_region, ' is unknown'
	1561	PRINT*, ' Must be <= ', statistic_regions
	1562	ENDIF
	1563	CALL local_stop
	1564	ENDIF
	1565
	1566	!
[116]	1567	!-- Check the interval for sorting particles.
	1568	!-- Using particles as cloud droplets requires sorting after each timestep.
	1569	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1570	dt_sort_particles = 0.0
	1571	IF ( myid == 0 ) THEN
	1572	PRINT*, '+++ WARNING: check_parameters:'
	1573	PRINT*, ' dt_sort_particles is reset to 0.0 because ', &
	1574	'of cloud_droplets = .TRUE.'
	1575	ENDIF
	1576	ENDIF
	1577
	1578	!
[1]	1579	!-- Set the default intervals for data output, if necessary
	1580	!-- NOTE: dt_dosp has already been set in package_parin
	1581	IF ( dt_data_output /= 9999999.9 ) THEN
	1582	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1583	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1584	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1585	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1586	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1587	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1588	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
	1589	ENDIF
	1590
	1591	!
	1592	!-- Set the default skip time intervals for data output, if necessary
	1593	IF ( skip_time_dopr == 9999999.9 ) &
	1594	skip_time_dopr = skip_time_data_output
	1595	IF ( skip_time_dosp == 9999999.9 ) &
	1596	skip_time_dosp = skip_time_data_output
	1597	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1598	skip_time_do2d_xy = skip_time_data_output
	1599	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1600	skip_time_do2d_xz = skip_time_data_output
	1601	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1602	skip_time_do2d_yz = skip_time_data_output
	1603	IF ( skip_time_do3d == 9999999.9 ) &
	1604	skip_time_do3d = skip_time_data_output
	1605	IF ( skip_time_data_output_av == 9999999.9 ) &
	1606	skip_time_data_output_av = skip_time_data_output
	1607
	1608	!
	1609	!-- Check the average intervals (first for 3d-data, then for profiles and
	1610	!-- spectra)
	1611	IF ( averaging_interval > dt_data_output_av ) THEN
	1612	IF ( myid == 0 ) THEN
	1613	PRINT*, '+++ check_parameters: average_interval=', &
	1614	averaging_interval, ' must be <= dt_data_output=', &
	1615	dt_data_output
	1616	ENDIF
	1617	CALL local_stop
	1618	ENDIF
	1619
	1620	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1621	averaging_interval_pr = averaging_interval
	1622	ENDIF
	1623
	1624	IF ( averaging_interval_pr > dt_dopr ) THEN
	1625	IF ( myid == 0 ) THEN
	1626	PRINT*, '+++ check_parameters: averaging_interval_pr=', &
	1627	averaging_interval_pr, ' must be <= dt_dopr=', dt_dopr
	1628	ENDIF
	1629	CALL local_stop
	1630	ENDIF
	1631
	1632	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1633	averaging_interval_sp = averaging_interval
	1634	ENDIF
	1635
	1636	IF ( averaging_interval_sp > dt_dosp ) THEN
	1637	IF ( myid == 0 ) THEN
	1638	PRINT*, '+++ check_parameters: averaging_interval_sp=', &
	1639	averaging_interval_sp, ' must be <= dt_dosp=', dt_dosp
	1640	ENDIF
	1641	CALL local_stop
	1642	ENDIF
	1643
	1644	!
	1645	!-- Set the default interval for profiles entering the temporal average
	1646	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1647	dt_averaging_input_pr = dt_averaging_input
	1648	ENDIF
	1649
	1650	!
	1651	!-- Set the default interval for the output of timeseries to a reasonable
	1652	!-- value (tries to minimize the number of calls of flow_statistics)
	1653	IF ( dt_dots == 9999999.9 ) THEN
	1654	IF ( averaging_interval_pr == 0.0 ) THEN
	1655	dt_dots = MIN( dt_run_control, dt_dopr )
	1656	ELSE
	1657	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1658	ENDIF
	1659	ENDIF
	1660
	1661	!
	1662	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1663	IF ( dt_averaging_input > averaging_interval ) THEN
	1664	IF ( myid == 0 ) THEN
	1665	PRINT*, '+++ check_parameters: dt_averaging_input=', &
	1666	dt_averaging_input, ' must be <= averaging_interval=', &
	1667	averaging_interval
	1668	ENDIF
	1669	CALL local_stop
	1670	ENDIF
	1671
	1672	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
	1673	IF ( myid == 0 ) THEN
	1674	PRINT*, '+++ check_parameters: dt_averaging_input_pr=', &
	1675	dt_averaging_input_pr, &
	1676	' must be <= averaging_interval_pr=', &
	1677	averaging_interval_pr
	1678	ENDIF
	1679	CALL local_stop
	1680	ENDIF
	1681
	1682	!
[72]	1683	!-- Set the default value for the integration interval of precipitation amount
	1684	IF ( precipitation ) THEN
	1685	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1686	precipitation_amount_interval = dt_do2d_xy
	1687	ELSE
	1688	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
	1689	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
	1690	'precipitation_amount_interval =', &
	1691	precipitation_amount_interval, &
	1692	' must not be larger than dt_do2d_xy', &
	1693	' = ', dt_do2d_xy
	1694	CALL local_stop
	1695	ENDIF
	1696	ENDIF
	1697	ENDIF
	1698
	1699	!
[1]	1700	!-- Determine the number of output profiles and check whether they are
	1701	!-- permissible
	1702	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1703
	1704	dopr_n = dopr_n + 1
	1705	i = dopr_n
	1706
	1707	!
	1708	!-- Determine internal profile number (for hom, homs)
	1709	!-- and store height levels
	1710	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1711
	1712	CASE ( 'u', '#u' )
	1713	dopr_index(i) = 1
[87]	1714	dopr_unit(i) = 'm/s'
[1]	1715	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1716	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1717	dopr_initial_index(i) = 5
	1718	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1719	data_output_pr(i) = data_output_pr(i)(2:)
	1720	ENDIF
	1721
	1722	CASE ( 'v', '#v' )
	1723	dopr_index(i) = 2
[87]	1724	dopr_unit(i) = 'm/s'
	1725	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1726	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1727	dopr_initial_index(i) = 6
	1728	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1729	data_output_pr(i) = data_output_pr(i)(2:)
	1730	ENDIF
	1731
	1732	CASE ( 'w' )
	1733	dopr_index(i) = 3
[87]	1734	dopr_unit(i) = 'm/s'
	1735	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1736
	1737	CASE ( 'pt', '#pt' )
	1738	IF ( .NOT. cloud_physics ) THEN
	1739	dopr_index(i) = 4
[87]	1740	dopr_unit(i) = 'K'
[1]	1741	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1742	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1743	dopr_initial_index(i) = 7
	1744	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1745	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1746	data_output_pr(i) = data_output_pr(i)(2:)
	1747	ENDIF
	1748	ELSE
	1749	dopr_index(i) = 43
[87]	1750	dopr_unit(i) = 'K'
[1]	1751	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1752	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1753	dopr_initial_index(i) = 28
	1754	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1755	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1756	data_output_pr(i) = data_output_pr(i)(2:)
	1757	ENDIF
	1758	ENDIF
	1759
	1760	CASE ( 'e' )
	1761	dopr_index(i) = 8
[87]	1762	dopr_unit(i) = 'm2/s2'
[1]	1763	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1764	hom(nzb,2,8,:) = 0.0
	1765
	1766	CASE ( 'km', '#km' )
	1767	dopr_index(i) = 9
[87]	1768	dopr_unit(i) = 'm2/s'
[1]	1769	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1770	hom(nzb,2,9,:) = 0.0
	1771	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1772	dopr_initial_index(i) = 23
	1773	hom(:,2,23,:) = hom(:,2,9,:)
	1774	data_output_pr(i) = data_output_pr(i)(2:)
	1775	ENDIF
	1776
	1777	CASE ( 'kh', '#kh' )
	1778	dopr_index(i) = 10
[87]	1779	dopr_unit(i) = 'm2/s'
[1]	1780	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1781	hom(nzb,2,10,:) = 0.0
	1782	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1783	dopr_initial_index(i) = 24
	1784	hom(:,2,24,:) = hom(:,2,10,:)
	1785	data_output_pr(i) = data_output_pr(i)(2:)
	1786	ENDIF
	1787
	1788	CASE ( 'l', '#l' )
	1789	dopr_index(i) = 11
[87]	1790	dopr_unit(i) = 'm'
[1]	1791	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1792	hom(nzb,2,11,:) = 0.0
	1793	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1794	dopr_initial_index(i) = 25
	1795	hom(:,2,25,:) = hom(:,2,11,:)
	1796	data_output_pr(i) = data_output_pr(i)(2:)
	1797	ENDIF
	1798
	1799	CASE ( 'w"u"' )
	1800	dopr_index(i) = 12
[87]	1801	dopr_unit(i) = 'm2/s2'
[1]	1802	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1803	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1804
	1805	CASE ( 'wu' )
	1806	dopr_index(i) = 13
[87]	1807	dopr_unit(i) = 'm2/s2'
[1]	1808	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1809
	1810	CASE ( 'w"v"' )
	1811	dopr_index(i) = 14
[87]	1812	dopr_unit(i) = 'm2/s2'
[1]	1813	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1814	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1815
	1816	CASE ( 'wv' )
	1817	dopr_index(i) = 15
[87]	1818	dopr_unit(i) = 'm2/s2'
[1]	1819	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1820
	1821	CASE ( 'w"pt"' )
	1822	dopr_index(i) = 16
[87]	1823	dopr_unit(i) = 'K m/s'
[1]	1824	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1825
	1826	CASE ( 'wpt' )
	1827	dopr_index(i) = 17
[87]	1828	dopr_unit(i) = 'K m/s'
[1]	1829	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1830
	1831	CASE ( 'wpt' )
	1832	dopr_index(i) = 18
[87]	1833	dopr_unit(i) = 'K m/s'
[1]	1834	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1835
	1836	CASE ( 'wu' )
	1837	dopr_index(i) = 19
[87]	1838	dopr_unit(i) = 'm2/s2'
[1]	1839	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1840	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1841
	1842	CASE ( 'wv' )
	1843	dopr_index(i) = 20
[87]	1844	dopr_unit(i) = 'm2/s2'
[1]	1845	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	1846	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	1847
	1848	CASE ( 'wptBC' )
	1849	dopr_index(i) = 21
[87]	1850	dopr_unit(i) = 'K m/s'
[1]	1851	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	1852
	1853	CASE ( 'wptBC' )
	1854	dopr_index(i) = 22
[87]	1855	dopr_unit(i) = 'K m/s'
[1]	1856	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	1857
[96]	1858	CASE ( 'sa', '#sa' )
	1859	IF ( .NOT. ocean ) THEN
	1860	IF ( myid == 0 ) THEN
	1861	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1862	data_output_pr(i), &
	1863	' is not implemented for ocean = FALSE'
	1864	ENDIF
	1865	CALL local_stop
	1866	ELSE
	1867	dopr_index(i) = 23
	1868	dopr_unit(i) = 'psu'
	1869	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	1870	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1871	dopr_initial_index(i) = 26
	1872	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1873	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1874	data_output_pr(i) = data_output_pr(i)(2:)
	1875	ENDIF
	1876	ENDIF
	1877
[1]	1878	CASE ( 'u*2' )
	1879	dopr_index(i) = 30
[87]	1880	dopr_unit(i) = 'm2/s2'
[1]	1881	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	1882
	1883	CASE ( 'v*2' )
	1884	dopr_index(i) = 31
[87]	1885	dopr_unit(i) = 'm2/s2'
[1]	1886	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	1887
	1888	CASE ( 'w*2' )
	1889	dopr_index(i) = 32
[87]	1890	dopr_unit(i) = 'm2/s2'
[1]	1891	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	1892
	1893	CASE ( 'pt*2' )
	1894	dopr_index(i) = 33
[87]	1895	dopr_unit(i) = 'K2'
[1]	1896	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	1897
	1898	CASE ( 'e*' )
	1899	dopr_index(i) = 34
[87]	1900	dopr_unit(i) = 'm2/s2'
[1]	1901	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	1902
	1903	CASE ( 'w2pt' )
	1904	dopr_index(i) = 35
[87]	1905	dopr_unit(i) = 'K m2/s2'
[1]	1906	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	1907
	1908	CASE ( 'wpt2' )
	1909	dopr_index(i) = 36
[87]	1910	dopr_unit(i) = 'K2 m/s'
[1]	1911	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	1912
	1913	CASE ( 'we' )
	1914	dopr_index(i) = 37
[87]	1915	dopr_unit(i) = 'm3/s3'
[1]	1916	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	1917
	1918	CASE ( 'w*3' )
	1919	dopr_index(i) = 38
[87]	1920	dopr_unit(i) = 'm3/s3'
[1]	1921	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	1922
	1923	CASE ( 'Sw' )
	1924	dopr_index(i) = 39
[89]	1925	dopr_unit(i) = 'none'
[1]	1926	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	1927
	1928	CASE ( 'q', '#q' )
[108]	1929	IF ( .NOT. humidity ) THEN
[1]	1930	IF ( myid == 0 ) THEN
	1931	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1932	data_output_pr(i), &
[108]	1933	' is not implemented for humidity = FALSE'
[1]	1934	ENDIF
	1935	CALL local_stop
	1936	ELSE
	1937	dopr_index(i) = 41
[87]	1938	dopr_unit(i) = 'kg/kg'
	1939	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1940	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1941	dopr_initial_index(i) = 26
	1942	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1943	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1944	data_output_pr(i) = data_output_pr(i)(2:)
	1945	ENDIF
	1946	ENDIF
	1947
	1948	CASE ( 's', '#s' )
	1949	IF ( .NOT. passive_scalar ) THEN
	1950	IF ( myid == 0 ) THEN
	1951	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1952	data_output_pr(i), &
	1953	' is not implemented for passive_scalar = FALSE'
	1954	ENDIF
	1955	CALL local_stop
	1956	ELSE
	1957	dopr_index(i) = 41
[87]	1958	dopr_unit(i) = 'kg/m3'
	1959	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1960	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1961	dopr_initial_index(i) = 26
	1962	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1963	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1964	data_output_pr(i) = data_output_pr(i)(2:)
	1965	ENDIF
	1966	ENDIF
	1967
	1968	CASE ( 'qv', '#qv' )
	1969	IF ( .NOT. cloud_physics ) THEN
	1970	dopr_index(i) = 41
[87]	1971	dopr_unit(i) = 'kg/kg'
	1972	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1973	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1974	dopr_initial_index(i) = 26
	1975	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	1976	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	1977	data_output_pr(i) = data_output_pr(i)(2:)
	1978	ENDIF
	1979	ELSE
	1980	dopr_index(i) = 42
[87]	1981	dopr_unit(i) = 'kg/kg'
	1982	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1983	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1984	dopr_initial_index(i) = 27
	1985	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	1986	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	1987	data_output_pr(i) = data_output_pr(i)(2:)
	1988	ENDIF
	1989	ENDIF
	1990
	1991	CASE ( 'lpt', '#lpt' )
	1992	IF ( .NOT. cloud_physics ) THEN
	1993	IF ( myid == 0 ) THEN
	1994	PRINT*, '+++ check_parameters: data_output_pr = ', &
	1995	data_output_pr(i), &
	1996	' is not implemented for cloud_physics = FALSE'
	1997	ENDIF
	1998	CALL local_stop
	1999	ELSE
	2000	dopr_index(i) = 4
[87]	2001	dopr_unit(i) = 'K'
[1]	2002	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2003	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2004	dopr_initial_index(i) = 7
	2005	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2006	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2007	data_output_pr(i) = data_output_pr(i)(2:)
	2008	ENDIF
	2009	ENDIF
	2010
	2011	CASE ( 'vpt', '#vpt' )
	2012	dopr_index(i) = 44
[87]	2013	dopr_unit(i) = 'K'
	2014	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2015	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2016	dopr_initial_index(i) = 29
	2017	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2018	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2019	data_output_pr(i) = data_output_pr(i)(2:)
	2020	ENDIF
	2021
	2022	CASE ( 'w"vpt"' )
	2023	dopr_index(i) = 45
[87]	2024	dopr_unit(i) = 'K m/s'
[1]	2025	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2026
	2027	CASE ( 'wvpt' )
	2028	dopr_index(i) = 46
[87]	2029	dopr_unit(i) = 'K m/s'
[1]	2030	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2031
	2032	CASE ( 'wvpt' )
	2033	dopr_index(i) = 47
[87]	2034	dopr_unit(i) = 'K m/s'
[1]	2035	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2036
	2037	CASE ( 'w"q"' )
[108]	2038	IF ( .NOT. humidity ) THEN
[1]	2039	IF ( myid == 0 ) THEN
	2040	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2041	data_output_pr(i), &
[108]	2042	' is not implemented for humidity = FALSE'
[1]	2043	ENDIF
	2044	CALL local_stop
	2045	ELSE
	2046	dopr_index(i) = 48
[87]	2047	dopr_unit(i) = 'kg/kg m/s'
[1]	2048	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2049	ENDIF
	2050
	2051	CASE ( 'wq' )
[108]	2052	IF ( .NOT. humidity ) THEN
[1]	2053	IF ( myid == 0 ) THEN
	2054	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2055	data_output_pr(i), &
[108]	2056	' is not implemented for humidity = FALSE'
[1]	2057	ENDIF
	2058	CALL local_stop
	2059	ELSE
	2060	dopr_index(i) = 49
[87]	2061	dopr_unit(i) = 'kg/kg m/s'
[1]	2062	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2063	ENDIF
	2064
	2065	CASE ( 'wq' )
[108]	2066	IF ( .NOT. humidity ) THEN
[1]	2067	IF ( myid == 0 ) THEN
	2068	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2069	data_output_pr(i), &
[108]	2070	' is not implemented for humidity = FALSE'
[1]	2071	ENDIF
	2072	CALL local_stop
	2073	ELSE
	2074	dopr_index(i) = 50
[87]	2075	dopr_unit(i) = 'kg/kg m/s'
[1]	2076	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2077	ENDIF
	2078
	2079	CASE ( 'w"s"' )
	2080	IF ( .NOT. passive_scalar ) THEN
	2081	IF ( myid == 0 ) THEN
	2082	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2083	data_output_pr(i), &
	2084	' is not implemented for passive_scalar = FALSE'
	2085	ENDIF
	2086	CALL local_stop
	2087	ELSE
	2088	dopr_index(i) = 48
[87]	2089	dopr_unit(i) = 'kg/m3 m/s'
[1]	2090	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2091	ENDIF
	2092
	2093	CASE ( 'ws' )
	2094	IF ( .NOT. passive_scalar ) THEN
	2095	IF ( myid == 0 ) THEN
	2096	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2097	data_output_pr(i), &
	2098	' is not implemented for passive_scalar = FALSE'
	2099	ENDIF
	2100	CALL local_stop
	2101	ELSE
	2102	dopr_index(i) = 49
[87]	2103	dopr_unit(i) = 'kg/m3 m/s'
[1]	2104	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2105	ENDIF
	2106
	2107	CASE ( 'ws' )
	2108	IF ( .NOT. passive_scalar ) THEN
	2109	IF ( myid == 0 ) THEN
	2110	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2111	data_output_pr(i), &
	2112	' is not implemented for passive_scalar = FALSE'
	2113	ENDIF
	2114	CALL local_stop
	2115	ELSE
	2116	dopr_index(i) = 50
[87]	2117	dopr_unit(i) = 'kg/m3 m/s'
[1]	2118	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2119	ENDIF
	2120
	2121	CASE ( 'w"qv"' )
[75]	2122	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2123	THEN
	2124	dopr_index(i) = 48
[87]	2125	dopr_unit(i) = 'kg/kg m/s'
[1]	2126	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2127	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2128	dopr_index(i) = 51
[87]	2129	dopr_unit(i) = 'kg/kg m/s'
[1]	2130	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2131	ELSE
	2132	IF ( myid == 0 ) THEN
	2133	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2134	data_output_pr(i), &
	2135	' is not implemented for cloud_physics = FALSE', &
[75]	2136	' and humidity = FALSE'
[1]	2137	ENDIF
	2138	CALL local_stop
	2139	ENDIF
	2140
	2141	CASE ( 'wqv' )
[75]	2142	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2143	THEN
	2144	dopr_index(i) = 49
[87]	2145	dopr_unit(i) = 'kg/kg m/s'
[1]	2146	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2147	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2148	dopr_index(i) = 52
[87]	2149	dopr_unit(i) = 'kg/kg m/s'
[1]	2150	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2151	ELSE
	2152	IF ( myid == 0 ) THEN
	2153	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2154	data_output_pr(i), &
	2155	' is not implemented for cloud_physics = FALSE', &
[75]	2156	' and humidity = FALSE'
[1]	2157	ENDIF
	2158	CALL local_stop
	2159	ENDIF
	2160
	2161	CASE ( 'wqv' )
[75]	2162	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2163	THEN
	2164	dopr_index(i) = 50
[87]	2165	dopr_unit(i) = 'kg/kg m/s'
[1]	2166	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2167	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2168	dopr_index(i) = 53
[87]	2169	dopr_unit(i) = 'kg/kg m/s'
[1]	2170	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2171	ELSE
	2172	IF ( myid == 0 ) THEN
	2173	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2174	data_output_pr(i), &
	2175	' is not implemented for cloud_physics = FALSE', &
[75]	2176	' and humidity = FALSE'
[1]	2177	ENDIF
	2178	CALL local_stop
	2179	ENDIF
	2180
	2181	CASE ( 'ql' )
	2182	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
	2183	IF ( myid == 0 ) THEN
	2184	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2185	data_output_pr(i), &
	2186	' is not implemented for cloud_physics = FALSE'
	2187	ENDIF
	2188	CALL local_stop
	2189	ELSE
	2190	dopr_index(i) = 54
[87]	2191	dopr_unit(i) = 'kg/kg'
[1]	2192	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2193	ENDIF
	2194
	2195	CASE ( 'wuu*/dz' )
	2196	dopr_index(i) = 55
[87]	2197	dopr_unit(i) = 'm2/s3'
[1]	2198	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2199
	2200	CASE ( 'wp/dz' )
	2201	dopr_index(i) = 56
[87]	2202	dopr_unit(i) = 'm2/s3'
[106]	2203	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2204
	2205	CASE ( 'w"e/dz' )
	2206	dopr_index(i) = 57
[87]	2207	dopr_unit(i) = 'm2/s3'
[1]	2208	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2209
	2210	CASE ( 'u"pt"' )
	2211	dopr_index(i) = 58
[87]	2212	dopr_unit(i) = 'K m/s'
[1]	2213	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2214
	2215	CASE ( 'upt' )
	2216	dopr_index(i) = 59
[87]	2217	dopr_unit(i) = 'K m/s'
[1]	2218	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2219
	2220	CASE ( 'upt_t' )
	2221	dopr_index(i) = 60
[87]	2222	dopr_unit(i) = 'K m/s'
[1]	2223	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2224
	2225	CASE ( 'v"pt"' )
	2226	dopr_index(i) = 61
[87]	2227	dopr_unit(i) = 'K m/s'
[1]	2228	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2229
	2230	CASE ( 'vpt' )
	2231	dopr_index(i) = 62
[87]	2232	dopr_unit(i) = 'K m/s'
[1]	2233	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2234
	2235	CASE ( 'vpt_t' )
	2236	dopr_index(i) = 63
[87]	2237	dopr_unit(i) = 'K m/s'
[1]	2238	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2239
[96]	2240	CASE ( 'rho' )
	2241	dopr_index(i) = 64
	2242	dopr_unit(i) = 'kg/m3'
	2243	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2244
[96]	2245	CASE ( 'w"sa"' )
	2246	IF ( .NOT. ocean ) THEN
	2247	IF ( myid == 0 ) THEN
	2248	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2249	data_output_pr(i), &
	2250	' is not implemented for ocean = FALSE'
	2251	ENDIF
	2252	CALL local_stop
	2253	ELSE
	2254	dopr_index(i) = 65
	2255	dopr_unit(i) = 'psu m/s'
	2256	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2257	ENDIF
	2258
	2259	CASE ( 'wsa' )
	2260	IF ( .NOT. ocean ) THEN
	2261	IF ( myid == 0 ) THEN
	2262	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2263	data_output_pr(i), &
	2264	' is not implemented for ocean = FALSE'
	2265	ENDIF
	2266	CALL local_stop
	2267	ELSE
	2268	dopr_index(i) = 66
	2269	dopr_unit(i) = 'psu m/s'
	2270	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2271	ENDIF
	2272
	2273	CASE ( 'wsa' )
	2274	IF ( .NOT. ocean ) THEN
	2275	IF ( myid == 0 ) THEN
	2276	PRINT*, '+++ check_parameters: data_output_pr = ', &
	2277	data_output_pr(i), &
	2278	' is not implemented for ocean = FALSE'
	2279	ENDIF
	2280	CALL local_stop
	2281	ELSE
	2282	dopr_index(i) = 67
	2283	dopr_unit(i) = 'psu m/s'
	2284	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2285	ENDIF
	2286
[106]	2287	CASE ( 'wp' )
	2288	dopr_index(i) = 68
	2289	dopr_unit(i) = 'm3/s3'
	2290	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2291
[106]	2292	CASE ( 'w"e' )
	2293	dopr_index(i) = 69
	2294	dopr_unit(i) = 'm3/s3'
	2295	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2296
	2297
[1]	2298	CASE DEFAULT
[87]	2299
	2300	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2301
	2302	IF ( unit == 'illegal' ) THEN
	2303	IF ( myid == 0 ) THEN
	2304	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2305	PRINT*, '+++ check_parameters: illegal value for data_',&
	2306	'output_pr or data_output_pr_user: "', &
	2307	TRIM( data_output_pr(i) ), '"'
	2308	ELSE
	2309	PRINT*, '+++ check_parameters: illegal value for data_',&
	2310	'output_pr: "', TRIM( data_output_pr(i) ),'"'
	2311	ENDIF
	2312	ENDIF
	2313	CALL local_stop
[1]	2314	ENDIF
	2315
	2316	END SELECT
	2317	!
	2318	!-- Check to which of the predefined coordinate systems the profile belongs
	2319	DO k = 1, crmax
	2320	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
	2321	/=0 ) &
	2322	THEN
	2323	dopr_crossindex(i) = k
	2324	EXIT
	2325	ENDIF
	2326	ENDDO
	2327	!
	2328	!-- Generate the text for the labels of the PROFIL output file. "-characters
	2329	!-- must be substituted, otherwise PROFIL would interpret them as TeX
	2330	!-- control characters
	2331	dopr_label(i) = data_output_pr(i)
	2332	position = INDEX( dopr_label(i) , '"' )
	2333	DO WHILE ( position /= 0 )
	2334	dopr_label(i)(position:position) = ''''
	2335	position = INDEX( dopr_label(i) , '"' )
	2336	ENDDO
	2337
	2338	ENDDO
	2339
	2340	!
	2341	!-- y-value range of the coordinate system (PROFIL).
	2342	!-- x-value range determined in plot_1d.
[94]	2343	IF ( .NOT. ocean ) THEN
	2344	cross_uymin = 0.0
	2345	IF ( z_max_do1d == -1.0 ) THEN
	2346	cross_uymax = zu(nzt+1)
	2347	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
	2348	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do1d=', &
	2349	z_max_do1d,' must be >= ', zu(nzb+1), &
	2350	' or <= ', zu(nzt+1)
	2351	CALL local_stop
	2352	ELSE
	2353	cross_uymax = z_max_do1d
	2354	ENDIF
[1]	2355	ENDIF
	2356
	2357	!
	2358	!-- Check whether the chosen normalizing factor for the coordinate systems is
	2359	!-- permissible
	2360	DO i = 1, crmax
	2361	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
	2362
	2363	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
	2364	j = 0
	2365
	2366	CASE DEFAULT
	2367	IF ( myid == 0 ) THEN
	2368	PRINT*, '+++ check_parameters: unknown normalize method'
	2369	PRINT*, ' cross_normalized_x="',cross_normalized_x(i),'"'
	2370	ENDIF
	2371	CALL local_stop
	2372
	2373	END SELECT
	2374	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
	2375
	2376	CASE ( '', 'z_i' )
	2377	j = 0
	2378
	2379	CASE DEFAULT
	2380	IF ( myid == 0 ) THEN
	2381	PRINT*, '+++ check_parameters: unknown normalize method'
	2382	PRINT*, ' cross_normalized_y="',cross_normalized_y(i),'"'
	2383	ENDIF
	2384	CALL local_stop
	2385
	2386	END SELECT
	2387	ENDDO
	2388	!
	2389	!-- Check normalized y-value range of the coordinate system (PROFIL)
	2390	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
	2391	THEN
	2392	IF ( myid == 0 ) PRINT*,'+++ check_parameters: z_max_do1d_normalize', &
	2393	'd=', z_max_do1d_normalized, ' must be >= 0.0'
	2394	CALL local_stop
	2395	ENDIF
	2396
	2397
	2398	!
	2399	!-- Append user-defined data output variables to the standard data output
	2400	IF ( data_output_user(1) /= ' ' ) THEN
	2401	i = 1
	2402	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2403	i = i + 1
	2404	ENDDO
	2405	j = 1
	2406	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2407	IF ( i > 100 ) THEN
	2408	IF ( myid == 0 ) THEN
	2409	PRINT*, '+++ check_parameters: number of output quantitities', &
	2410	' given by data_output and data_output_user'
	2411	PRINT*, ' exceeds the limit of 100'
	2412	ENDIF
	2413	CALL local_stop
	2414	ENDIF
	2415	data_output(i) = data_output_user(j)
	2416	i = i + 1
	2417	j = j + 1
	2418	ENDDO
	2419	ENDIF
	2420
	2421	!
	2422	!-- Check and set steering parameters for 2d/3d data output and averaging
	2423	i = 1
	2424	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2425	!
	2426	!-- Check for data averaging
	2427	ilen = LEN_TRIM( data_output(i) )
	2428	j = 0 ! no data averaging
	2429	IF ( ilen > 3 ) THEN
	2430	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2431	j = 1 ! data averaging
	2432	data_output(i) = data_output(i)(1:ilen-3)
	2433	ENDIF
	2434	ENDIF
	2435	!
	2436	!-- Check for cross section or volume data
	2437	ilen = LEN_TRIM( data_output(i) )
	2438	k = 0 ! 3d data
	2439	var = data_output(i)(1:ilen)
	2440	IF ( ilen > 3 ) THEN
	2441	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2442	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2443	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2444	k = 1 ! 2d data
	2445	var = data_output(i)(1:ilen-3)
	2446	ENDIF
	2447	ENDIF
	2448	!
	2449	!-- Check for allowed value and set units
	2450	SELECT CASE ( TRIM( var ) )
	2451
	2452	CASE ( 'e' )
	2453	IF ( constant_diffusion ) THEN
	2454	IF ( myid == 0 ) THEN
	2455	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2456	'" requires constant_diffusion = .FALSE.'
	2457	ENDIF
	2458	CALL local_stop
	2459	ENDIF
	2460	unit = 'm2/s2'
	2461
	2462	CASE ( 'pc', 'pr' )
	2463	IF ( .NOT. particle_advection ) THEN
	2464	IF ( myid == 0 ) THEN
	2465	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
[104]	2466	'" requires a "particles_par"-NAMELIST'
	2467	PRINT*, ' in the parameter file (PARIN)'
[1]	2468	ENDIF
	2469	CALL local_stop
	2470	ENDIF
	2471	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2472	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2473
	2474	CASE ( 'q', 'vpt' )
[75]	2475	IF ( .NOT. humidity ) THEN
[1]	2476	IF ( myid == 0 ) THEN
	2477	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
[75]	2478	'" requires humidity = .TRUE.'
[1]	2479	ENDIF
	2480	CALL local_stop
	2481	ENDIF
	2482	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2483	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2484
	2485	CASE ( 'ql' )
	2486	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
	2487	IF ( myid == 0 ) THEN
	2488	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2489	'" requires cloud_physics = .TRUE.'
	2490	PRINT*, ' or cloud_droplets = .TRUE.'
	2491	ENDIF
	2492	CALL local_stop
	2493	ENDIF
	2494	unit = 'kg/kg'
	2495
	2496	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2497	IF ( .NOT. cloud_droplets ) THEN
	2498	IF ( myid == 0 ) THEN
	2499	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2500	'" requires cloud_droplets = .TRUE.'
	2501	ENDIF
	2502	CALL local_stop
	2503	ENDIF
	2504	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2505	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2506	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2507
	2508	CASE ( 'qv' )
	2509	IF ( .NOT. cloud_physics ) THEN
	2510	IF ( myid == 0 ) THEN
	2511	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2512	'" requires cloud_physics = .TRUE.'
	2513	ENDIF
	2514	CALL local_stop
	2515	ENDIF
	2516	unit = 'kg/kg'
	2517
[96]	2518	CASE ( 'rho' )
	2519	IF ( .NOT. ocean ) THEN
	2520	IF ( myid == 0 ) THEN
	2521	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2522	'" requires ocean = .TRUE.'
	2523	ENDIF
	2524	CALL local_stop
	2525	ENDIF
	2526	unit = 'kg/m3'
	2527
[1]	2528	CASE ( 's' )
	2529	IF ( .NOT. passive_scalar ) THEN
	2530	IF ( myid == 0 ) THEN
	2531	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2532	'" requires passive_scalar = .TRUE.'
	2533	ENDIF
	2534	CALL local_stop
	2535	ENDIF
	2536	unit = 'conc'
	2537
[96]	2538	CASE ( 'sa' )
	2539	IF ( .NOT. ocean ) THEN
	2540	IF ( myid == 0 ) THEN
	2541	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2542	'" requires ocean = .TRUE.'
	2543	ENDIF
	2544	CALL local_stop
	2545	ENDIF
	2546	unit = 'psu'
	2547
[72]	2548	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
[1]	2549	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
	2550	IF ( myid == 0 ) THEN
	2551	PRINT*, '+++ check_parameters: illegal value for data_',&
	2552	'output: "', TRIM( var ), '" is only allowed'
	2553	PRINT*, ' for horizontal cross section'
	2554	ENDIF
	2555	CALL local_stop
	2556	ENDIF
	2557	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
	2558	IF ( myid == 0 ) THEN
	2559	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2560	'" requires cloud_physics = .TRUE.'
	2561	ENDIF
	2562	CALL local_stop
	2563	ENDIF
[72]	2564	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
	2565	IF ( myid == 0 ) THEN
	2566	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2567	'" requires precipitation = .TRUE.'
	2568	ENDIF
	2569	CALL local_stop
	2570	ENDIF
	2571	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
	2572	IF ( myid == 0 ) THEN
	2573	PRINT*, '+++ check_parameters: temporal averaging of ', &
	2574	' precipitation amount "', TRIM( var ), &
	2575	'" not possible'
	2576	ENDIF
	2577	CALL local_stop
	2578	ENDIF
	2579	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
	2580	IF ( myid == 0 ) THEN
	2581	PRINT*, '+++ check_parameters: output of "', TRIM( var ), &
	2582	'" requires precipitation = .TRUE.'
	2583	ENDIF
	2584	CALL local_stop
	2585	ENDIF
	2586
	2587
[1]	2588	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2589	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2590	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
[72]	2591	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2592	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2593	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[1]	2594
	2595	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2596	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2597	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2598	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2599	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2600	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2601	CONTINUE
	2602
	2603	CASE DEFAULT
	2604	CALL user_check_data_output( var, unit )
	2605
	2606	IF ( unit == 'illegal' ) THEN
	2607	IF ( myid == 0 ) THEN
	2608	IF ( data_output_user(1) /= ' ' ) THEN
	2609	PRINT*, '+++ check_parameters: illegal value for data_',&
	2610	'output or data_output_user: "', &
	2611	TRIM( data_output(i) ), '"'
	2612	ELSE
	2613	PRINT*, '+++ check_parameters: illegal value for data_',&
	2614	'output: "', TRIM( data_output(i) ), '"'
	2615	ENDIF
	2616	ENDIF
	2617	CALL local_stop
	2618	ENDIF
	2619
	2620	END SELECT
	2621	!
	2622	!-- Set the internal steering parameters appropriately
	2623	IF ( k == 0 ) THEN
	2624	do3d_no(j) = do3d_no(j) + 1
	2625	do3d(j,do3d_no(j)) = data_output(i)
	2626	do3d_unit(j,do3d_no(j)) = unit
	2627	ELSE
	2628	do2d_no(j) = do2d_no(j) + 1
	2629	do2d(j,do2d_no(j)) = data_output(i)
	2630	do2d_unit(j,do2d_no(j)) = unit
	2631	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2632	data_output_xy(j) = .TRUE.
	2633	ENDIF
	2634	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2635	data_output_xz(j) = .TRUE.
	2636	ENDIF
	2637	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2638	data_output_yz(j) = .TRUE.
	2639	ENDIF
	2640	ENDIF
	2641
	2642	IF ( j == 1 ) THEN
	2643	!
	2644	!-- Check, if variable is already subject to averaging
	2645	found = .FALSE.
	2646	DO k = 1, doav_n
	2647	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2648	ENDDO
	2649
	2650	IF ( .NOT. found ) THEN
	2651	doav_n = doav_n + 1
	2652	doav(doav_n) = var
	2653	ENDIF
	2654	ENDIF
	2655
	2656	i = i + 1
	2657	ENDDO
	2658
	2659	!
	2660	!-- Store sectional planes in one shared array
	2661	section(:,1) = section_xy
	2662	section(:,2) = section_xz
	2663	section(:,3) = section_yz
	2664
	2665	!
	2666	!-- Upper plot limit (grid point value) for 1D profiles
	2667	IF ( z_max_do1d == -1.0 ) THEN
	2668	nz_do1d = nzt+1
	2669	ELSE
	2670	DO k = nzb+1, nzt+1
	2671	nz_do1d = k
	2672	IF ( zw(k) > z_max_do1d ) EXIT
	2673	ENDDO
	2674	ENDIF
	2675
	2676	!
	2677	!-- Upper plot limit for 2D vertical sections
	2678	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2679	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
	2680	IF ( myid == 0 ) PRINT*, '+++ check_parameters: z_max_do2d=', &
	2681	z_max_do2d, ' must be >= ', zu(nzb+1), &
	2682	'(zu(nzb+1)) and <= ', zu(nzt), ' (zu(nzt))'
	2683	CALL local_stop
	2684	ENDIF
	2685
	2686	!
	2687	!-- Upper plot limit for 3D arrays
	2688	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2689
	2690	!
	2691	!-- Determine and check accuracy for compressed 3D plot output
	2692	IF ( do3d_compress ) THEN
	2693	!
	2694	!-- Compression only permissible on T3E machines
	2695	IF ( host(1:3) /= 't3e' ) THEN
	2696	IF ( myid == 0 ) THEN
	2697	PRINT*, '+++ check_parameters: do3d_compress = .TRUE. not allow', &
	2698	'ed on host "', TRIM( host ), '"'
	2699	ENDIF
	2700	CALL local_stop
	2701	ENDIF
	2702
	2703	i = 1
	2704	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2705
	2706	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2707	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2708	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
	2709	IF ( myid == 0 ) THEN
	2710	PRINT*, '+++ check_parameters: illegal precision: ', &
	2711	'do3d_comp_prec(', i, ')="', TRIM(do3d_comp_prec(i)),'"'
	2712	ENDIF
	2713	CALL local_stop
	2714	ENDIF
	2715
	2716	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2717	var = do3d_comp_prec(i)(1:ilen-1)
	2718
	2719	SELECT CASE ( var )
	2720
	2721	CASE ( 'u' )
	2722	j = 1
	2723	CASE ( 'v' )
	2724	j = 2
	2725	CASE ( 'w' )
	2726	j = 3
	2727	CASE ( 'p' )
	2728	j = 4
	2729	CASE ( 'pt' )
	2730	j = 5
	2731
	2732	CASE DEFAULT
	2733	IF ( myid == 0 ) THEN
	2734	PRINT*, '+++ check_parameters: unknown variable in ', &
	2735	'assignment'
	2736	PRINT*, ' do3d_comp_prec(', i, ')="', &
	2737	TRIM( do3d_comp_prec(i) ),'"'
	2738	ENDIF
	2739	CALL local_stop
	2740
	2741	END SELECT
	2742
	2743	plot_3d_precision(j)%precision = prec
	2744	i = i + 1
	2745
	2746	ENDDO
	2747	ENDIF
	2748
	2749	!
	2750	!-- Check the data output format(s)
	2751	IF ( data_output_format(1) == ' ' ) THEN
	2752	!
	2753	!-- Default value
	2754	netcdf_output = .TRUE.
	2755	ELSE
	2756	i = 1
	2757	DO WHILE ( data_output_format(i) /= ' ' )
	2758
	2759	SELECT CASE ( data_output_format(i) )
	2760
	2761	CASE ( 'netcdf' )
	2762	netcdf_output = .TRUE.
	2763	CASE ( 'iso2d' )
	2764	iso2d_output = .TRUE.
	2765	CASE ( 'profil' )
	2766	profil_output = .TRUE.
	2767	CASE ( 'avs' )
	2768	avs_output = .TRUE.
	2769
	2770	CASE DEFAULT
	2771	IF ( myid == 0 ) THEN
	2772	PRINT*, '+++ check_parameters:'
	2773	PRINT*, ' unknown value for data_output_format "', &
	2774	TRIM( data_output_format(i) ),'"'
	2775	ENDIF
	2776	CALL local_stop
	2777
	2778	END SELECT
	2779
	2780	i = i + 1
	2781	IF ( i > 10 ) EXIT
	2782
	2783	ENDDO
	2784
	2785	ENDIF
	2786
	2787	!
	2788	!-- Check netcdf precison
	2789	ldum = .FALSE.
	2790	CALL define_netcdf_header( 'ch', ldum, 0 )
	2791
	2792	!
	2793	!-- Check, whether a constant diffusion coefficient shall be used
	2794	IF ( km_constant /= -1.0 ) THEN
	2795	IF ( km_constant < 0.0 ) THEN
	2796	IF ( myid == 0 ) PRINT*, '+++ check_parameters: km_constant=', &
	2797	km_constant, ' < 0.0'
	2798	CALL local_stop
	2799	ELSE
	2800	IF ( prandtl_number < 0.0 ) THEN
	2801	IF ( myid == 0 ) PRINT*,'+++ check_parameters: prandtl_number=',&
	2802	prandtl_number, ' < 0.0'
	2803	CALL local_stop
	2804	ENDIF
	2805	constant_diffusion = .TRUE.
	2806
	2807	IF ( prandtl_layer ) THEN
	2808	IF ( myid == 0 ) PRINT*, '+++ check_parameters: prandtl_layer ',&
	2809	'is not allowed with fixed value of km'
	2810	CALL local_stop
	2811	ENDIF
	2812	ENDIF
	2813	ENDIF
	2814
	2815	!
	2816	!-- In case of non-cyclic lateral boundaries, set the default maximum value
	2817	!-- for the horizontal diffusivity used within the outflow damping layer,
	2818	!-- and check/set the width of the damping layer
	2819	IF ( bc_lr /= 'cyclic' ) THEN
	2820	IF ( km_damp_max == -1.0 ) THEN
	2821	km_damp_max = 0.5 * dx
	2822	ENDIF
	2823	IF ( outflow_damping_width == -1.0 ) THEN
	2824	outflow_damping_width = MIN( 20, nx/2 )
	2825	ENDIF
	2826	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
	2827	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
	2828	'idth out of range'
	2829	CALL local_stop
	2830	ENDIF
	2831	ENDIF
	2832
	2833	IF ( bc_ns /= 'cyclic' ) THEN
	2834	IF ( km_damp_max == -1.0 ) THEN
	2835	km_damp_max = 0.5 * dy
	2836	ENDIF
	2837	IF ( outflow_damping_width == -1.0 ) THEN
	2838	outflow_damping_width = MIN( 20, ny/2 )
	2839	ENDIF
	2840	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
	2841	IF ( myid == 0 ) PRINT*, '+++ check_parameters: outflow_damping w',&
	2842	'idth out of range'
	2843	CALL local_stop
	2844	ENDIF
	2845	ENDIF
	2846
	2847	!
	2848	!-- Check value range for rif
	2849	IF ( rif_min >= rif_max ) THEN
	2850	IF ( myid == 0 ) PRINT*, '+++ check_parameters: rif_min=', rif_min, &
	2851	' must be less than rif_max=', rif_max
	2852	CALL local_stop
	2853	ENDIF
	2854
	2855	!
	2856	!-- Determine upper and lower hight level indices for random perturbations
[97]	2857	IF ( disturbance_level_b == -9999999.9 ) THEN
	2858	IF ( ocean ) THEN
	2859	disturbance_level_b = zu((nzt*2)/3)
	2860	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2861	ELSE
	2862	disturbance_level_b = zu(nzb+3)
	2863	disturbance_level_ind_b = nzb + 3
	2864	ENDIF
[1]	2865	ELSEIF ( disturbance_level_b < zu(3) ) THEN
	2866	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
	2867	disturbance_level_b, ' must be >= ',zu(3), &
	2868	'(zu(3))'
	2869	CALL local_stop
	2870	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
	2871	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_b=',&
	2872	disturbance_level_b, ' must be <= ',zu(nzt-2),&
	2873	'(zu(nzt-2))'
	2874	CALL local_stop
	2875	ELSE
	2876	DO k = 3, nzt-2
	2877	IF ( disturbance_level_b <= zu(k) ) THEN
	2878	disturbance_level_ind_b = k
	2879	EXIT
	2880	ENDIF
	2881	ENDDO
	2882	ENDIF
	2883
[97]	2884	IF ( disturbance_level_t == -9999999.9 ) THEN
	2885	IF ( ocean ) THEN
	2886	disturbance_level_t = zu(nzt-3)
	2887	disturbance_level_ind_t = nzt - 3
	2888	ELSE
	2889	disturbance_level_t = zu(nzt/3)
	2890	disturbance_level_ind_t = nzt / 3
	2891	ENDIF
[1]	2892	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
	2893	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
	2894	disturbance_level_t, ' must be <= ',zu(nzt-2),&
	2895	'(zu(nzt-2))'
	2896	CALL local_stop
	2897	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
	2898	IF ( myid == 0 ) PRINT*, '+++ check_parameters: disturbance_level_t=',&
	2899	disturbance_level_t, ' must be >= ', &
	2900	'disturbance_level_b=', disturbance_level_b
	2901	CALL local_stop
	2902	ELSE
	2903	DO k = 3, nzt-2
	2904	IF ( disturbance_level_t <= zu(k) ) THEN
	2905	disturbance_level_ind_t = k
	2906	EXIT
	2907	ENDIF
	2908	ENDDO
	2909	ENDIF
	2910
	2911	!
	2912	!-- Check again whether the levels determined this way are ok.
	2913	!-- Error may occur at automatic determination and too few grid points in
	2914	!-- z-direction.
	2915	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
	2916	IF ( myid == 0 ) PRINT*, '+++ check_parameters: ', &
	2917	'disturbance_level_ind_t=', &
	2918	disturbance_level_ind_t, ' must be >= ', &
	2919	'disturbance_level_ind_b=', &
	2920	disturbance_level_ind_b
	2921	CALL local_stop
	2922	ENDIF
	2923
	2924	!
	2925	!-- Determine the horizontal index range for random perturbations.
	2926	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	2927	!-- near the inflow and the perturbation area is further limited to ...(1)
	2928	!-- after the initial phase of the flow.
	2929	dist_nxl = 0; dist_nxr = nx
	2930	dist_nys = 0; dist_nyn = ny
	2931	IF ( bc_lr /= 'cyclic' ) THEN
	2932	IF ( inflow_disturbance_begin == -1 ) THEN
	2933	inflow_disturbance_begin = MIN( 10, nx/2 )
	2934	ENDIF
	2935	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	2936	THEN
	2937	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2938	'_begin out of range'
	2939	CALL local_stop
	2940	ENDIF
	2941	IF ( inflow_disturbance_end == -1 ) THEN
	2942	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	2943	ENDIF
	2944	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	2945	THEN
	2946	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2947	'_end out of range'
	2948	CALL local_stop
	2949	ENDIF
	2950	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	2951	IF ( inflow_disturbance_begin == -1 ) THEN
	2952	inflow_disturbance_begin = MIN( 10, ny/2 )
	2953	ENDIF
	2954	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	2955	THEN
	2956	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2957	'_begin out of range'
	2958	CALL local_stop
	2959	ENDIF
	2960	IF ( inflow_disturbance_end == -1 ) THEN
	2961	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	2962	ENDIF
	2963	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	2964	THEN
	2965	IF ( myid == 0 ) PRINT*, '+++ check_parameters: inflow_disturbance',&
	2966	'_end out of range'
	2967	CALL local_stop
	2968	ENDIF
	2969	ENDIF
	2970
[73]	2971	IF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	2972	dist_nxr = nx - inflow_disturbance_begin
	2973	dist_nxl(1) = nx - inflow_disturbance_end
[73]	2974	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	2975	dist_nxl = inflow_disturbance_begin
	2976	dist_nxr(1) = inflow_disturbance_end
[73]	2977	ENDIF
	2978	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	2979	dist_nyn = ny - inflow_disturbance_begin
	2980	dist_nys(1) = ny - inflow_disturbance_end
[73]	2981	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	2982	dist_nys = inflow_disturbance_begin
	2983	dist_nyn(1) = inflow_disturbance_end
	2984	ENDIF
	2985
	2986	!
[151]	2987	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	2988	!-- boundary (so far, a turbulent inflow is realized from the left side only)
	2989	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
	2990	IF ( myid == 0 ) THEN
	2991	PRINT*, '+++ check_parameters:'
	2992	PRINT*, ' turbulent_inflow = .T. requires a Dirichlet condition', &
	2993	' at the inflow boundary'
	2994	ENDIF
	2995	CALL local_stop
	2996	ENDIF
	2997
	2998	!
	2999	!-- In case of turbulent inflow calculate the index of the recycling plane
	3000	IF ( turbulent_inflow ) THEN
	3001	IF ( recycling_width == 9999999.9 ) THEN
	3002	!
	3003	!-- Set the default value for the width of the recycling domain
	3004	recycling_width = 0.1 * nx * dx
	3005	ELSE
	3006	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
	3007	IF ( myid == 0 ) THEN
	3008	PRINT*, '+++ check_parameters:'
	3009	PRINT*, ' illegal value for recycling_width: ', &
	3010	recycling_width
	3011	ENDIF
	3012	CALL local_stop
	3013	ENDIF
	3014	ENDIF
	3015	!
	3016	!-- Calculate the index
	3017	recycling_plane = recycling_width / dx
	3018	ENDIF
	3019
	3020	!
[1]	3021	!-- Check random generator
	3022	IF ( random_generator /= 'system-specific' .AND. &
	3023	random_generator /= 'numerical-recipes' ) THEN
	3024	IF ( myid == 0 ) THEN
	3025	PRINT*, '+++ check_parameters:'
	3026	PRINT*, ' unknown random generator: random_generator=', &
	3027	random_generator
	3028	ENDIF
	3029	CALL local_stop
	3030	ENDIF
	3031
	3032	!
	3033	!-- Determine damping level index for 1D model
	3034	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3035	IF ( damp_level_1d == -1.0 ) THEN
	3036	damp_level_1d = zu(nzt+1)
	3037	damp_level_ind_1d = nzt + 1
	3038	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
	3039	IF ( myid == 0 ) PRINT*, '+++ check_parameters: damp_level_1d=', &
	3040	damp_level_1d, ' must be > 0.0 and < ', &
	3041	'zu(nzt+1)', zu(nzt+1)
	3042	CALL local_stop
	3043	ELSE
	3044	DO k = 1, nzt+1
	3045	IF ( damp_level_1d <= zu(k) ) THEN
	3046	damp_level_ind_1d = k
	3047	EXIT
	3048	ENDIF
	3049	ENDDO
	3050	ENDIF
	3051	ENDIF
	3052	!
	3053	!-- Check some other 1d-model parameters
	3054	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3055	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
	3056	IF ( myid == 0 ) PRINT*, '+++ check_parameters: mixing_length_1d = "', &
	3057	TRIM( mixing_length_1d ), '" is unknown'
	3058	CALL local_stop
	3059	ENDIF
	3060	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3061	TRIM( dissipation_1d ) /= 'detering' ) THEN
	3062	IF ( myid == 0 ) PRINT*, '+++ check_parameters: dissipation_1d = "', &
	3063	TRIM( dissipation_1d ), '" is unknown'
	3064	CALL local_stop
	3065	ENDIF
	3066
	3067	!
	3068	!-- Set time for the next user defined restart (time_restart is the
	3069	!-- internal parameter for steering restart events)
	3070	IF ( restart_time /= 9999999.9 ) THEN
	3071	IF ( restart_time > simulated_time ) time_restart = restart_time
	3072	ELSE
	3073	!
	3074	!-- In case of a restart run, set internal parameter to default (no restart)
	3075	!-- if the NAMELIST-parameter restart_time is omitted
	3076	time_restart = 9999999.9
	3077	ENDIF
	3078
	3079	!
	3080	!-- Set default value of the time needed to terminate a model run
	3081	IF ( termination_time_needed == -1.0 ) THEN
	3082	IF ( host(1:3) == 'ibm' ) THEN
	3083	termination_time_needed = 300.0
	3084	ELSE
	3085	termination_time_needed = 35.0
	3086	ENDIF
	3087	ENDIF
	3088
	3089	!
	3090	!-- Check the time needed to terminate a model run
	3091	IF ( host(1:3) == 't3e' ) THEN
	3092	!
	3093	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3094	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3095	IF ( termination_time_needed <= 30.0 ) THEN
	3096	IF ( myid == 0 ) THEN
	3097	PRINT*, '+++ check_parameters: termination_time_needed', &
	3098	termination_time_needed
	3099	PRINT*, ' must be > 30.0 on host "', host, &
	3100	'"'
	3101	ENDIF
	3102	CALL local_stop
	3103	ENDIF
	3104	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3105	!
	3106	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3107	!-- because the job time consumed before executing palm (for compiling,
	3108	!-- copying of files, etc.) has to be regarded
	3109	IF ( termination_time_needed < 300.0 ) THEN
	3110	IF ( myid == 0 ) THEN
	3111	PRINT*, '+++ WARNING: check_parameters: termination_time_', &
	3112	'needed', termination_time_needed
	3113	PRINT*, ' should be >= 300.0', &
	3114	' on host "', host, '"'
	3115	ENDIF
	3116	ENDIF
	3117	ENDIF
	3118
	3119
	3120	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |