Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1093

Last change on this file since 1093 was 1093, checked in by raasch, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 142.6 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[484]	20	! Current revisions:
[1]	21	! -----------------
[1093]	22	!
[1054]	23	!
	24	! Former revisions:
	25	! -----------------
	26	! $Id: check_parameters.f90 1093 2013-02-02 12:58:49Z raasch $
	27	!
[1093]	28	! 1092 2013-02-02 11:24:22Z raasch
	29	! unused variables removed
	30	!
[1070]	31	! 1069 2012-11-28 16:18:43Z maronga
	32	! allow usage of topography in combination with cloud physics
	33	!
[1066]	34	! 1065 2012-11-22 17:42:36Z hoffmann
	35	! Bugfix: It is not allowed to use cloud_scheme = seifert_beheng without
	36	! precipitation in order to save computational resources.
	37	!
[1061]	38	! 1060 2012-11-21 07:19:51Z raasch
	39	! additional check for parameter turbulent_inflow
	40	!
[1054]	41	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	42	! necessary changes for the new two-moment cloud physics scheme added:
	43	! - check cloud physics scheme (Kessler or Seifert and Beheng)
	44	! - plant_canopy is not allowed
	45	! - currently, only cache loop_optimization is allowed
	46	! - initial profiles of nr, qr
	47	! - boundary condition of nr, qr
	48	! - check output quantities (qr, nr, prr)
[979]	49	!
[1037]	50	! 1036 2012-10-22 13:43:42Z raasch
	51	! code put under GPL (PALM 3.9)
	52	!
[1035]	53	! 1031/1034 2012-10-22 11:32:49Z raasch
	54	! check of netcdf4 parallel file support
	55	!
[1020]	56	! 1019 2012-09-28 06:46:45Z raasch
	57	! non-optimized version of prognostic_equations not allowed any more
	58	!
[1017]	59	! 1015 2012-09-27 09:23:24Z raasch
	60	! acc allowed for loop optimization,
	61	! checks for adjustment of mixing length to the Prandtl mixing length removed
	62	!
[1004]	63	! 1003 2012-09-14 14:35:53Z raasch
	64	! checks for cases with unequal subdomain sizes removed
	65	!
[1002]	66	! 1001 2012-09-13 14:08:46Z raasch
	67	! all actions concerning leapfrog- and upstream-spline-scheme removed
	68	!
[997]	69	! 996 2012-09-07 10:41:47Z raasch
	70	! little reformatting
[1001]	71
[979]	72	! 978 2012-08-09 08:28:32Z fricke
[978]	73	! setting of bc_lr/ns_dirneu/neudir
	74	! outflow damping layer removed
	75	! check for z0h*
	76	! check for pt_damping_width
[667]	77	!
[965]	78	! 964 2012-07-26 09:14:24Z raasch
	79	! check of old profil-parameters removed
	80	!
[941]	81	! 940 2012-07-09 14:31:00Z raasch
	82	! checks for parameter neutral
	83	!
[925]	84	! 924 2012-06-06 07:44:41Z maronga
	85	! Bugfix: preprocessor directives caused error during compilation
	86	!
[893]	87	! 892 2012-05-02 13:51:44Z maronga
	88	! Bugfix for parameter file check ( excluding __netcdf4 )
	89	!
[867]	90	! 866 2012-03-28 06:44:41Z raasch
	91	! use only 60% of the geostrophic wind as translation speed in case of Galilean
	92	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
	93	! timestep
	94	!
[863]	95	! 861 2012-03-26 14:18:34Z suehring
	96	! Check for topography and ws-scheme removed.
	97	! Check for loop_optimization = 'vector' and ws-scheme removed.
	98	!
[846]	99	! 845 2012-03-07 10:23:05Z maronga
	100	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	101	!
[829]	102	! 828 2012-02-21 12:00:36Z raasch
	103	! check of collision_kernel extended
	104	!
[826]	105	! 825 2012-02-19 03:03:44Z raasch
	106	! check for collision_kernel and curvature_solution_effects
	107	!
[810]	108	! 809 2012-01-30 13:32:58Z maronga
	109	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	110	!
[808]	111	! 807 2012-01-25 11:53:51Z maronga
	112	! New cpp directive "__check" implemented which is used by check_namelist_files
	113	!
[775]	114	! 774 2011-10-27 13:34:16Z letzel
	115	! bugfix for prescribed u,v-profiles
	116	!
[768]	117	! 767 2011-10-14 06:39:12Z raasch
	118	! Calculating u,v-profiles from given profiles by linear interpolation.
	119	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	120	!
[708]	121	! 707 2011-03-29 11:39:40Z raasch
	122	! setting of bc_lr/ns_dirrad/raddir
	123	!
	124	! 689 2011-02-20 19:31:12z gryschka
[690]	125	! Bugfix for some logical expressions
	126	! (syntax was not compatible with all compilers)
[687]	127	!
[690]	128	! 680 2011-02-04 23:16:06Z gryschka
[681]	129	! init_vortex is not allowed with volume_flow_control
[668]	130	!
[674]	131	! 673 2011-01-18 16:19:48Z suehring
	132	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	133	!
[668]	134	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	135	! Exchange of parameters between ocean and atmosphere via PE0
	136	! Check for illegal combination of ws-scheme and timestep scheme.
	137	! Check for topography and ws-scheme.
	138	! Check for not cyclic boundary conditions in combination with ws-scheme and
	139	! loop_optimization = 'vector'.
	140	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	141	! Different processor/grid topology in atmosphere and ocean is now allowed!
	142	! Bugfixes in checking for conserve_volume_flow_mode
[601]	143	! 600 2010-11-24 16:10:51Z raasch
	144	! change due to new default value of surface_waterflux
[581]	145	! 580 2010-10-05 13:59:11Z heinze
[601]	146	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	147	!
[568]	148	! 567 2010-10-01 10:46:30Z helmke
	149	! calculating masks changed
	150	!
[565]	151	! 564 2010-09-30 13:18:59Z helmke
	152	! palm message identifiers of masked output changed, 20 replaced by max_masks
	153	!
[554]	154	! 553 2010-09-01 14:09:06Z weinreis
	155	! masks is calculated and removed from inipar
[532]	156	!
	157	! 531 2010-04-21 06:47:21Z heinze
	158	! Bugfix: unit of hyp changed to dbar
[392]	159	!
[525]	160	! 524 2010-03-30 02:04:51Z raasch
	161	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	162	!
[494]	163	! 493 2010-03-01 08:30:24Z raasch
	164	! netcdf_data_format is checked
	165	!
[449]	166	! 411 2009-12-11 14:15:58Z heinze
	167	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	168	! Initialization of large scale vertical motion (subsidence/ascent)
	169	!
	170	! 410 2009-12-04 17:05:40Z letzel
	171	! masked data output
	172	!
[392]	173	! 388 2009-09-23 09:40:33Z raasch
[388]	174	! Check profiles fpr prho and hyp.
[376]	175	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	176	! interval has been set, respective error message is included
[366]	177	! bc_lr_cyc and bc_ns_cyc are set,
[328]	178	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	179	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	180	! Coupling with independent precursor runs.
[264]	181	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	182	! Bugfix: pressure included for profile output
[240]	183	! Check pressure gradient conditions
[256]	184	! topography_grid_convention moved from user_check_parameters
	185	! 'single_street_canyon'
[367]	186	! Added shf* and qsws* to the list of available output data
[226]	187	!
	188	! 222 2009-01-12 16:04:16Z letzel
[217]	189	! +user_check_parameters
[213]	190	! Output of messages replaced by message handling routine.
[206]	191	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	192	! deleted __mpi2 directives
[222]	193	! Check that PALM is called with mrun -K parallel for coupling
[198]	194	!
	195	! 197 2008-09-16 15:29:03Z raasch
[177]	196	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	197	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	198	!
	199	! Strict grid matching along z is not needed for mg-solver.
[153]	200	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	201	! Case of reading data for recycling included in initializing_actions,
[197]	202	! check of turbulent_inflow and calculation of recycling_plane.
	203	! q*2 profile added
[139]	204	!
	205	! 138 2007-11-28 10:03:58Z letzel
[138]	206	! Plant canopy added
[132]	207	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	208	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	209	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	210	!
	211	! 109 2007-08-28 15:26:47Z letzel
[102]	212	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	213	! conditions for temperature and fluxes) in case of coupled runs.
	214	! +profiles for wp and w"e
[104]	215	! Bugfix: Error message concerning output of particle concentration (pc)
	216	! modified
[108]	217	! More checks and more default values for coupled runs
	218	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	219	! cloud_physics = .T.)
	220	! Rayleigh damping for ocean fixed.
[109]	221	! Check and, if necessary, set default value for dt_coupling
[98]	222	!
	223	! 97 2007-06-21 08:23:15Z raasch
[97]	224	! Initial salinity profile is calculated, salinity boundary conditions are
	225	! checked,
[94]	226	! z_max_do1d is checked only in case of ocean = .f.,
[97]	227	! +initial temperature and geostrophic velocity profiles for the ocean version,
	228	! use_pt_reference renamed use_reference
[77]	229	!
[90]	230	! 89 2007-05-25 12:08:31Z raasch
	231	! Check for user-defined profiles
	232	!
[77]	233	! 75 2007-03-22 09:54:05Z raasch
[51]	234	! "by_user" allowed as initializing action, -data_output_ts,
[63]	235	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	236	! and pt_reference are checked, moisture renamed humidity,
[72]	237	! output of precipitation amount/rate and roughnes length + check
[73]	238	! possible negative humidities are avoided in initial profile,
[75]	239	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	240	! revision added to run_description_header
[1]	241	!
[39]	242	! 20 2007-02-26 00:12:32Z raasch
	243	! Temperature and humidity gradients at top are now calculated for nzt+1,
	244	! top_heatflux and respective boundary condition bc_pt_t is checked
	245	!
[3]	246	! RCS Log replace by Id keyword, revision history cleaned up
	247	!
[1]	248	! Revision 1.61 2006/08/04 14:20:25 raasch
	249	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	250	! use_upstream_for_tke, default value for dt_dopts,
	251	! generation of file header moved from routines palm and header to here
	252	!
	253	! Revision 1.1 1997/08/26 06:29:23 raasch
	254	! Initial revision
	255	!
	256	!
	257	! Description:
	258	! ------------
	259	! Check control parameters and deduce further quantities.
	260	!------------------------------------------------------------------------------!
	261
	262	USE arrays_3d
[824]	263	USE cloud_parameters
[1]	264	USE constants
	265	USE control_parameters
[264]	266	USE dvrp_variables
[1]	267	USE grid_variables
	268	USE indices
	269	USE model_1d
	270	USE netcdf_control
	271	USE particle_attributes
	272	USE pegrid
	273	USE profil_parameter
[411]	274	USE subsidence_mod
[1]	275	USE statistics
	276	USE transpose_indices
	277
	278	IMPLICIT NONE
	279
	280	CHARACTER (LEN=1) :: sq
	281	CHARACTER (LEN=6) :: var
	282	CHARACTER (LEN=7) :: unit
	283	CHARACTER (LEN=8) :: date
	284	CHARACTER (LEN=10) :: time
[102]	285	CHARACTER (LEN=40) :: coupling_string
[1]	286	CHARACTER (LEN=100) :: action
	287
[1092]	288	INTEGER :: i, ilen, iremote = 0, j, k, kk, position, prec
[1]	289	LOGICAL :: found, ldum
[1092]	290	REAL :: gradient, remote = 0.0, simulation_time_since_reference
[1]	291
	292	!
	293	!-- Warning, if host is not set
	294	IF ( host(1:1) == ' ' ) THEN
[213]	295	message_string = '"host" is not set. Please check that environment ' // &
	296	'variable "localhost" & is set before running PALM'
[226]	297	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	298	ENDIF
	299
	300	!
[102]	301	!-- Check the coupling mode
	302	IF ( coupling_mode /= 'uncoupled' .AND. &
	303	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	304	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	305	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	306	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	307	ENDIF
	308
	309	!
[108]	310	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	311	IF ( coupling_mode /= 'uncoupled') THEN
[213]	312
[108]	313	IF ( dt_coupling == 9999999.9 ) THEN
[213]	314	message_string = 'dt_coupling is not set but required for coup' // &
	315	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	316	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	317	ENDIF
[213]	318
[206]	319	#if defined( __parallel )
[807]	320
	321	!
	322	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	323	!-- program.
	324	!-- check_namelist_files will need the following information of the other
	325	!-- model (atmosphere/ocean).
[845]	326	! dt_coupling = remote
	327	! dt_max = remote
	328	! restart_time = remote
	329	! dt_restart= remote
	330	! simulation_time_since_reference = remote
	331	! dx = remote
[807]	332
	333
[809]	334	#if ! defined( __check )
[667]	335	IF ( myid == 0 ) THEN
	336	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	337	ierr )
	338	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	339	status, ierr )
	340	ENDIF
	341	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	342	#endif
[108]	343	IF ( dt_coupling /= remote ) THEN
[213]	344	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	345	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	346	'dt_coupling_remote = ', remote
[226]	347	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	348	ENDIF
[109]	349	IF ( dt_coupling <= 0.0 ) THEN
[809]	350	#if ! defined( __check )
[667]	351	IF ( myid == 0 ) THEN
	352	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	353	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	354	status, ierr )
	355	ENDIF
	356	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	357	#endif
[109]	358	dt_coupling = MAX( dt_max, remote )
[213]	359	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	360	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	361	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	362	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	363	ENDIF
[809]	364	#if ! defined( __check )
[667]	365	IF ( myid == 0 ) THEN
	366	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	367	ierr )
	368	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	369	status, ierr )
	370	ENDIF
	371	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	372	#endif
[108]	373	IF ( restart_time /= remote ) THEN
[213]	374	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	375	'": restart_time = ', restart_time, '& is not equal to ', &
	376	'restart_time_remote = ', remote
[226]	377	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	378	ENDIF
[809]	379	#if ! defined( __check )
[667]	380	IF ( myid == 0 ) THEN
	381	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	382	ierr )
	383	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	384	status, ierr )
	385	ENDIF
	386	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	387	#endif
[108]	388	IF ( dt_restart /= remote ) THEN
[213]	389	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	390	'": dt_restart = ', dt_restart, '& is not equal to ', &
	391	'dt_restart_remote = ', remote
[226]	392	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	393	ENDIF
[213]	394
[291]	395	simulation_time_since_reference = end_time - coupling_start_time
[809]	396	#if ! defined( __check )
[667]	397	IF ( myid == 0 ) THEN
	398	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	399	14, comm_inter, ierr )
	400	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	401	status, ierr )
	402	ENDIF
	403	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	404	#endif
[291]	405	IF ( simulation_time_since_reference /= remote ) THEN
[213]	406	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	407	'": simulation_time_since_reference = ', &
	408	simulation_time_since_reference, '& is not equal to ', &
	409	'simulation_time_since_reference_remote = ', remote
[226]	410	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	411	ENDIF
[213]	412
[809]	413	#if ! defined( __check )
[667]	414	IF ( myid == 0 ) THEN
	415	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	416	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	417	status, ierr )
[108]	418	ENDIF
[667]	419	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	420
[807]	421	#endif
[667]	422	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	423
	424	IF ( dx < remote ) THEN
	425	WRITE( message_string, * ) 'coupling mode "', &
	426	TRIM( coupling_mode ), &
	427	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	428	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	429	ENDIF
	430
	431	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	432	WRITE( message_string, * ) 'coupling mode "', &
	433	TRIM( coupling_mode ), &
	434	'": Domain size in x-direction is not equal in ocean and atmosphere'
	435	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	436	ENDIF
	437
[108]	438	ENDIF
[213]	439
[809]	440	#if ! defined( __check )
[667]	441	IF ( myid == 0) THEN
	442	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	443	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	444	status, ierr )
[108]	445	ENDIF
[667]	446	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	447	#endif
[667]	448	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	449
	450	IF ( dy < remote ) THEN
	451	WRITE( message_string, * ) 'coupling mode "', &
	452	TRIM( coupling_mode ), &
	453	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	454	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	455	ENDIF
	456
	457	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	458	WRITE( message_string, * ) 'coupling mode "', &
	459	TRIM( coupling_mode ), &
	460	'": Domain size in y-direction is not equal in ocean and atmosphere'
	461	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	462	ENDIF
	463
	464	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	465	WRITE( message_string, * ) 'coupling mode "', &
	466	TRIM( coupling_mode ), &
	467	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	468	' atmosphere'
	469	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	470	ENDIF
	471
	472	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	473	WRITE( message_string, * ) 'coupling mode "', &
	474	TRIM( coupling_mode ), &
	475	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	476	' atmosphere'
	477	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	478	ENDIF
	479
[108]	480	ENDIF
[222]	481	#else
	482	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	483	' ''mrun -K parallel'''
[226]	484	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	485	#endif
	486	ENDIF
	487
[809]	488	#if defined( __parallel ) && ! defined ( __check )
[108]	489	!
	490	!-- Exchange via intercommunicator
[667]	491	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	492	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	493	ierr )
[667]	494	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	495	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	496	comm_inter, status, ierr )
[108]	497	ENDIF
[667]	498	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	499
[108]	500	#endif
	501
	502
	503	!
[1]	504	!-- Generate the file header which is used as a header for most of PALM's
	505	!-- output files
	506	CALL DATE_AND_TIME( date, time )
	507	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	508	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	509	IF ( coupling_mode == 'uncoupled' ) THEN
	510	coupling_string = ''
	511	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	512	coupling_string = ' coupled (atmosphere)'
	513	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	514	coupling_string = ' coupled (ocean)'
	515	ENDIF
[1]	516
[102]	517	WRITE ( run_description_header, &
	518	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	519	TRIM( version ), TRIM( revision ), 'run: ', &
	520	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	521	'host: ', TRIM( host ), run_date, run_time
[1]	522
	523	!
[63]	524	!-- Check the general loop optimization method
	525	IF ( loop_optimization == 'default' ) THEN
	526	IF ( host(1:3) == 'nec' ) THEN
	527	loop_optimization = 'vector'
	528	ELSE
	529	loop_optimization = 'cache'
	530	ENDIF
	531	ENDIF
	532
[1015]	533	SELECT CASE ( TRIM( loop_optimization ) )
	534
[1019]	535	CASE ( 'acc', 'cache', 'vector' )
[1015]	536	CONTINUE
	537
	538	CASE DEFAULT
	539	message_string = 'illegal value given for loop_optimization: "' // &
	540	TRIM( loop_optimization ) // '"'
	541	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
	542
	543	END SELECT
	544
[63]	545	!
[1]	546	!-- Check topography setting (check for illegal parameter combinations)
	547	IF ( topography /= 'flat' ) THEN
	548	action = ' '
[861]	549	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
[1]	550	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	551	ENDIF
[861]	552	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	553	THEN
[1]	554	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	555	ENDIF
[114]	556	IF ( psolver == 'sor' ) THEN
[1]	557	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	558	ENDIF
	559	IF ( sloping_surface ) THEN
	560	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	561	ENDIF
	562	IF ( galilei_transformation ) THEN
	563	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	564	ENDIF
	565	IF ( cloud_droplets ) THEN
[1069]	566	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE. (has not been tested)'
[1]	567	ENDIF
	568	IF ( .NOT. prandtl_layer ) THEN
	569	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	570	ENDIF
	571	IF ( action /= ' ' ) THEN
[213]	572	message_string = 'a non-flat topography does not allow ' // &
	573	TRIM( action )
[226]	574	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	575	ENDIF
[256]	576	!
	577	!-- In case of non-flat topography, check whether the convention how to
	578	!-- define the topography grid has been set correctly, or whether the default
	579	!-- is applicable. If this is not possible, abort.
	580	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	581	IF ( TRIM( topography ) /= 'single_building' .AND. &
	582	TRIM( topography ) /= 'single_street_canyon' .AND. &
	583	TRIM( topography ) /= 'read_from_file' ) THEN
	584	!-- The default value is not applicable here, because it is only valid
	585	!-- for the two standard cases 'single_building' and 'read_from_file'
	586	!-- defined in init_grid.
	587	WRITE( message_string, * ) &
	588	'The value for "topography_grid_convention" ', &
	589	'is not set. Its default value is & only valid for ', &
	590	'"topography" = ''single_building'', ', &
	591	'''single_street_canyon'' & or ''read_from_file''.', &
	592	' & Choose ''cell_edge'' or ''cell_center''.'
	593	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	594	ELSE
	595	!-- The default value is applicable here.
	596	!-- Set convention according to topography.
	597	IF ( TRIM( topography ) == 'single_building' .OR. &
	598	TRIM( topography ) == 'single_street_canyon' ) THEN
	599	topography_grid_convention = 'cell_edge'
	600	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	601	topography_grid_convention = 'cell_center'
	602	ENDIF
	603	ENDIF
	604	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	605	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	606	WRITE( message_string, * ) &
	607	'The value for "topography_grid_convention" is ', &
	608	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	609	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	610	ENDIF
	611
[1]	612	ENDIF
[94]	613
[1]	614	!
[94]	615	!-- Check ocean setting
	616	IF ( ocean ) THEN
[332]	617
[94]	618	action = ' '
	619	IF ( action /= ' ' ) THEN
[213]	620	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	621	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	622	ENDIF
	623
[332]	624	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	625	TRIM( coupling_char ) == '_O' ) THEN
[343]	626
[94]	627	!
[332]	628	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	629	!-- ocean run (this setting is done via mrun-option -y)
[343]	630
[291]	631	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	632	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	633	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	634
[291]	635	ENDIF
	636	!
[1053]	637	!-- Check cloud scheme
	638	IF ( cloud_scheme == 'seifert_beheng' ) THEN
	639	icloud_scheme = 0
	640	ELSEIF ( cloud_scheme == 'kessler' ) THEN
	641	icloud_scheme = 1
	642	ELSE
	643	message_string = 'unknown cloud microphysics scheme cloud_scheme ="' // &
	644	TRIM( cloud_scheme ) // '"'
	645	CALL message( 'check_parameters', 'PA0357', 1, 2, 0, 6, 0 )
	646	ENDIF
	647	!
[1]	648	!-- Check whether there are any illegal values
	649	!-- Pressure solver:
	650	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	651	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	652	message_string = 'unknown solver for perturbation pressure: psolver' // &
	653	' = "' // TRIM( psolver ) // '"'
[226]	654	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	655	ENDIF
	656
	657	#if defined( __parallel )
	658	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	659	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	660	'for a 1d domain-decomposition along x & please do' // &
	661	' not set npey/=1 in the parameter file'
[226]	662	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	663	ENDIF
	664	#else
	665	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	666	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	667	' for a parallel environment'
[226]	668	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	669	ENDIF
	670	#endif
	671
	672	IF ( psolver == 'multigrid' ) THEN
	673	IF ( cycle_mg == 'w' ) THEN
	674	gamma_mg = 2
	675	ELSEIF ( cycle_mg == 'v' ) THEN
	676	gamma_mg = 1
	677	ELSE
[213]	678	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	679	TRIM( cycle_mg ) // '"'
[226]	680	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	681	ENDIF
	682	ENDIF
	683
	684	IF ( fft_method /= 'singleton-algorithm' .AND. &
	685	fft_method /= 'temperton-algorithm' .AND. &
	686	fft_method /= 'system-specific' ) THEN
[213]	687	message_string = 'unknown fft-algorithm: fft_method = "' // &
	688	TRIM( fft_method ) // '"'
[226]	689	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	690	ENDIF
[667]	691
	692	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	693	.NOT. call_psolver_at_all_substeps ) THEN
[667]	694	message_string = 'psolver must be called at each RK3 substep when "'//&
	695	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	696	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	697	END IF
[1]	698	!
	699	!-- Advection schemes:
[1001]	700	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	701	THEN
[214]	702	message_string = 'unknown advection scheme: momentum_advec = "' // &
	703	TRIM( momentum_advec ) // '"'
[226]	704	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	705	ENDIF
[1001]	706	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	707	.AND. ( timestep_scheme == 'euler' .OR. &
	708	timestep_scheme == 'runge-kutta-2' ) ) &
	709	THEN
[667]	710	message_string = 'momentum_advec or scalar_advec = "' &
	711	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	712	TRIM( timestep_scheme ) // '"'
[226]	713	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	714	ENDIF
[667]	715	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
[1001]	716	scalar_advec /= 'bc-scheme' ) &
	717	THEN
[214]	718	message_string = 'unknown advection scheme: scalar_advec = "' // &
	719	TRIM( scalar_advec ) // '"'
[226]	720	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	721	ENDIF
[1019]	722	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
	723	THEN
	724	message_string = 'advection_scheme scalar_advec = "' &
	725	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
	726	TRIM( loop_optimization ) // '"'
	727	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
	728	ENDIF
[1]	729
	730	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	731	use_upstream_for_tke = .TRUE.
[214]	732	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	733	'use_sgs_for_particles = .TRUE.'
[226]	734	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	735	ENDIF
	736
[824]	737	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	738	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	739	'curvature_solution_effects = .TRUE.'
	740	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	741	ENDIF
	742
[1]	743	!
[1019]	744	!-- Set LOGICAL switches to enhance performance
	745	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	746	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	747
	748	!
[1]	749	!-- Timestep schemes:
	750	SELECT CASE ( TRIM( timestep_scheme ) )
	751
	752	CASE ( 'euler' )
	753	intermediate_timestep_count_max = 1
	754
	755	CASE ( 'runge-kutta-2' )
	756	intermediate_timestep_count_max = 2
	757
	758	CASE ( 'runge-kutta-3' )
	759	intermediate_timestep_count_max = 3
	760
	761	CASE DEFAULT
[214]	762	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	763	TRIM( timestep_scheme ) // '"'
[226]	764	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	765
	766	END SELECT
	767
[667]	768	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	769	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	770	message_string = 'momentum advection scheme "' // &
	771	TRIM( momentum_advec ) // '" & does not work with ' // &
	772	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	773	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	774	ENDIF
	775
[825]	776	!
	777	!-- Collision kernels:
	778	SELECT CASE ( TRIM( collision_kernel ) )
	779
[828]	780	CASE ( 'hall', 'hall_fast' )
[825]	781	hall_kernel = .TRUE.
	782
	783	CASE ( 'palm' )
	784	palm_kernel = .TRUE.
	785
[828]	786	CASE ( 'wang', 'wang_fast' )
[825]	787	wang_kernel = .TRUE.
	788
	789	CASE ( 'none' )
	790
	791
	792	CASE DEFAULT
	793	message_string = 'unknown collision kernel: collision_kernel = "' // &
	794	TRIM( collision_kernel ) // '"'
	795	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	796
	797	END SELECT
[828]	798	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	799
[147]	800	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	801	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	802	!
[214]	803	!-- No restart run: several initialising actions are possible
[1]	804	action = initializing_actions
	805	DO WHILE ( TRIM( action ) /= '' )
	806	position = INDEX( action, ' ' )
	807	SELECT CASE ( action(1:position-1) )
	808
	809	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	810	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	811	action = action(position+1:)
	812
	813	CASE DEFAULT
[214]	814	message_string = 'initializing_action = "' // &
	815	TRIM( action ) // '" unkown or not allowed'
[226]	816	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	817
	818	END SELECT
	819	ENDDO
	820	ENDIF
[214]	821
[680]	822	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	823	conserve_volume_flow ) THEN
	824	message_string = 'initializing_actions = "initialize_vortex"' // &
	825	' ist not allowed with conserve_volume_flow = .T.'
	826	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	827	ENDIF
	828
	829
[1]	830	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	831	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	832	message_string = 'initializing_actions = "set_constant_profiles"' // &
	833	' and "set_1d-model_profiles" are not allowed ' // &
	834	'simultaneously'
[226]	835	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	836	ENDIF
[214]	837
[46]	838	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	839	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	840	message_string = 'initializing_actions = "set_constant_profiles"' // &
	841	' and "by_user" are not allowed simultaneously'
[226]	842	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	843	ENDIF
[214]	844
[46]	845	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	846	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	847	message_string = 'initializing_actions = "by_user" and ' // &
	848	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	849	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	850	ENDIF
[1]	851
[75]	852	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	853	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	854	'not allowed with humidity = ', humidity
[226]	855	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	856	ENDIF
	857
[72]	858	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	859	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	860	'not allowed with cloud_physics = ', cloud_physics
[226]	861	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	862	ENDIF
	863
[75]	864	IF ( humidity .AND. sloping_surface ) THEN
[214]	865	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	866	'are not allowed simultaneously'
[226]	867	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	868	ENDIF
	869
[75]	870	IF ( passive_scalar .AND. humidity ) THEN
[214]	871	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	872	'is not allowed simultaneously'
[226]	873	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	874	ENDIF
	875
[138]	876	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	877	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	878	'coefficient & given value is drag_coefficient = 0.0'
[226]	879	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	880	ENDIF
	881
[1053]	882	IF ( plant_canopy .AND. cloud_physics .AND. icloud_scheme == 0 ) THEN
	883	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
	884	' seifert_beheng'
	885	CALL message( 'check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
	886	ENDIF
	887
	888	IF ( loop_optimization /= 'cache' .AND. cloud_physics .AND. &
	889	icloud_scheme == 0 ) THEN
	890	message_string = 'cloud_scheme = seifert_beheng requires ' // &
	891	'loop_optimization = cache'
	892	CALL message( 'check_parameters', 'PA0362', 1, 2, 0, 6, 0 )
	893	ENDIF
	894
[1065]	895	IF ( cloud_physics .AND. icloud_scheme == 0 .AND. &
	896	.NOT. precipitation ) THEN
	897	message_string = 'cloud_scheme = seifert_beheng requires ' // &
	898	'precipitation = .TRUE.'
	899	CALL message( 'check_parameters', 'PA0363', 1, 2, 0, 6, 0 )
	900	ENDIF
	901
[1]	902	!
	903	!-- In case of no model continuation run, check initialising parameters and
	904	!-- deduce further quantities
	905	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	906
	907	!
[767]	908	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	909	pt_init = pt_surface
[1053]	910	IF ( humidity ) THEN
	911	q_init = q_surface
	912	!
	913	!-- It is not allowed to choose initial profiles of rain water content
	914	!-- and rain drop concentration. They are set to 0.0.
	915	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
	916	qr_init = 0.0
	917	nr_init = 0.0
	918	ENDIF
	919	ENDIF
[94]	920	IF ( ocean ) sa_init = sa_surface
	921	IF ( passive_scalar ) q_init = s_surface
[138]	922	IF ( plant_canopy ) lad = 0.0
[1]	923
	924	!
	925	!--
	926	!-- If required, compute initial profile of the geostrophic wind
	927	!-- (component ug)
	928	i = 1
	929	gradient = 0.0
[97]	930
	931	IF ( .NOT. ocean ) THEN
	932
	933	ug_vertical_gradient_level_ind(1) = 0
	934	ug(0) = ug_surface
	935	DO k = 1, nzt+1
[177]	936	IF ( i < 11 ) THEN
	937	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	938	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	939	gradient = ug_vertical_gradient(i) / 100.0
	940	ug_vertical_gradient_level_ind(i) = k - 1
	941	i = i + 1
[1]	942	ENDIF
[177]	943	ENDIF
[97]	944	IF ( gradient /= 0.0 ) THEN
	945	IF ( k /= 1 ) THEN
	946	ug(k) = ug(k-1) + dzu(k) * gradient
	947	ELSE
	948	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	949	ENDIF
[1]	950	ELSE
[97]	951	ug(k) = ug(k-1)
[1]	952	ENDIF
[97]	953	ENDDO
[1]	954
[97]	955	ELSE
	956
	957	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	958	ug(nzt+1) = ug_surface
[667]	959	DO k = nzt, nzb, -1
[177]	960	IF ( i < 11 ) THEN
	961	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	962	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	963	gradient = ug_vertical_gradient(i) / 100.0
	964	ug_vertical_gradient_level_ind(i) = k + 1
	965	i = i + 1
[97]	966	ENDIF
	967	ENDIF
	968	IF ( gradient /= 0.0 ) THEN
	969	IF ( k /= nzt ) THEN
	970	ug(k) = ug(k+1) - dzu(k+1) * gradient
	971	ELSE
	972	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	973	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	974	ENDIF
	975	ELSE
	976	ug(k) = ug(k+1)
	977	ENDIF
	978	ENDDO
	979
	980	ENDIF
	981
[1]	982	!
[767]	983	!-- In case of no given gradients for ug, choose a zero gradient
[97]	984	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	985	ug_vertical_gradient_level(1) = 0.0
	986	ENDIF
	987
	988	!
	989	!--
	990	!-- If required, compute initial profile of the geostrophic wind
	991	!-- (component vg)
	992	i = 1
	993	gradient = 0.0
[97]	994
	995	IF ( .NOT. ocean ) THEN
	996
	997	vg_vertical_gradient_level_ind(1) = 0
	998	vg(0) = vg_surface
	999	DO k = 1, nzt+1
[177]	1000	IF ( i < 11 ) THEN
	1001	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	1002	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	1003	gradient = vg_vertical_gradient(i) / 100.0
	1004	vg_vertical_gradient_level_ind(i) = k - 1
	1005	i = i + 1
[1]	1006	ENDIF
	1007	ENDIF
[97]	1008	IF ( gradient /= 0.0 ) THEN
	1009	IF ( k /= 1 ) THEN
	1010	vg(k) = vg(k-1) + dzu(k) * gradient
	1011	ELSE
	1012	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	1013	ENDIF
[1]	1014	ELSE
[97]	1015	vg(k) = vg(k-1)
[1]	1016	ENDIF
[97]	1017	ENDDO
[1]	1018
[97]	1019	ELSE
	1020
[121]	1021	vg_vertical_gradient_level_ind(1) = nzt+1
	1022	vg(nzt+1) = vg_surface
[667]	1023	DO k = nzt, nzb, -1
[177]	1024	IF ( i < 11 ) THEN
	1025	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	1026	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	1027	gradient = vg_vertical_gradient(i) / 100.0
	1028	vg_vertical_gradient_level_ind(i) = k + 1
	1029	i = i + 1
[97]	1030	ENDIF
	1031	ENDIF
	1032	IF ( gradient /= 0.0 ) THEN
	1033	IF ( k /= nzt ) THEN
	1034	vg(k) = vg(k+1) - dzu(k+1) * gradient
	1035	ELSE
	1036	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	1037	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	1038	ENDIF
	1039	ELSE
	1040	vg(k) = vg(k+1)
	1041	ENDIF
	1042	ENDDO
	1043
	1044	ENDIF
	1045
[1]	1046	!
[767]	1047	!-- In case of no given gradients for vg, choose a zero gradient
[97]	1048	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1049	vg_vertical_gradient_level(1) = 0.0
	1050	ENDIF
	1051
	1052	!
[767]	1053	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	1054	!-- interpolate them from wind profile data (if given)
	1055	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	1056
	1057	u_init = ug
	1058	v_init = vg
	1059
	1060	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	1061
	1062	IF ( uv_heights(1) /= 0.0 ) THEN
	1063	message_string = 'uv_heights(1) must be 0.0'
	1064	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	1065	ENDIF
	1066
	1067	use_prescribed_profile_data = .TRUE.
	1068
	1069	kk = 1
	1070	u_init(0) = 0.0
	1071	v_init(0) = 0.0
	1072
	1073	DO k = 1, nz+1
	1074
	1075	IF ( kk < 100 ) THEN
	1076	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	1077	kk = kk + 1
	1078	IF ( kk == 100 ) EXIT
	1079	ENDDO
	1080	ENDIF
	1081
[774]	1082	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1083	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1084	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1085	( u_profile(kk+1) - u_profile(kk) )
	1086	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1087	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1088	( v_profile(kk+1) - v_profile(kk) )
	1089	ELSE
	1090	u_init(k) = u_profile(kk)
	1091	v_init(k) = v_profile(kk)
	1092	ENDIF
	1093
	1094	ENDDO
	1095
	1096	ELSE
	1097
	1098	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1099	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1100
	1101	ENDIF
	1102
	1103	!
[94]	1104	!-- Compute initial temperature profile using the given temperature gradients
[940]	1105	IF ( .NOT. neutral ) THEN
[94]	1106
[940]	1107	i = 1
	1108	gradient = 0.0
[94]	1109
[940]	1110	IF ( .NOT. ocean ) THEN
	1111
	1112	pt_vertical_gradient_level_ind(1) = 0
	1113	DO k = 1, nzt+1
	1114	IF ( i < 11 ) THEN
	1115	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1116	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1117	gradient = pt_vertical_gradient(i) / 100.0
	1118	pt_vertical_gradient_level_ind(i) = k - 1
	1119	i = i + 1
	1120	ENDIF
[1]	1121	ENDIF
[940]	1122	IF ( gradient /= 0.0 ) THEN
	1123	IF ( k /= 1 ) THEN
	1124	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1125	ELSE
	1126	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	1127	ENDIF
[94]	1128	ELSE
[940]	1129	pt_init(k) = pt_init(k-1)
[94]	1130	ENDIF
[940]	1131	ENDDO
[1]	1132
[940]	1133	ELSE
[94]	1134
[940]	1135	pt_vertical_gradient_level_ind(1) = nzt+1
	1136	DO k = nzt, 0, -1
	1137	IF ( i < 11 ) THEN
	1138	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1139	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1140	gradient = pt_vertical_gradient(i) / 100.0
	1141	pt_vertical_gradient_level_ind(i) = k + 1
	1142	i = i + 1
	1143	ENDIF
[94]	1144	ENDIF
[940]	1145	IF ( gradient /= 0.0 ) THEN
	1146	IF ( k /= nzt ) THEN
	1147	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1148	ELSE
	1149	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1150	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1151	ENDIF
[94]	1152	ELSE
[940]	1153	pt_init(k) = pt_init(k+1)
[94]	1154	ENDIF
[940]	1155	ENDDO
[94]	1156
[940]	1157	ENDIF
	1158
[94]	1159	ENDIF
	1160
[1]	1161	!
	1162	!-- In case of no given temperature gradients, choose gradient of neutral
	1163	!-- stratification
[94]	1164	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1165	pt_vertical_gradient_level(1) = 0.0
	1166	ENDIF
	1167
	1168	!
[94]	1169	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1170	!-- boundary condition
[19]	1171	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1172
	1173	!
	1174	!-- If required, compute initial humidity or scalar profile using the given
	1175	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1176	!-- values of the scalar parameters on humidity parameters
	1177	IF ( passive_scalar ) THEN
	1178	bc_q_b = bc_s_b
	1179	bc_q_t = bc_s_t
	1180	q_surface = s_surface
	1181	q_surface_initial_change = s_surface_initial_change
	1182	q_vertical_gradient = s_vertical_gradient
	1183	q_vertical_gradient_level = s_vertical_gradient_level
	1184	surface_waterflux = surface_scalarflux
[407]	1185	wall_humidityflux = wall_scalarflux
[1]	1186	ENDIF
	1187
[75]	1188	IF ( humidity .OR. passive_scalar ) THEN
[1]	1189
	1190	i = 1
	1191	gradient = 0.0
	1192	q_vertical_gradient_level_ind(1) = 0
	1193	DO k = 1, nzt+1
[177]	1194	IF ( i < 11 ) THEN
	1195	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1196	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1197	gradient = q_vertical_gradient(i) / 100.0
	1198	q_vertical_gradient_level_ind(i) = k - 1
	1199	i = i + 1
[1]	1200	ENDIF
	1201	ENDIF
	1202	IF ( gradient /= 0.0 ) THEN
	1203	IF ( k /= 1 ) THEN
	1204	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1205	ELSE
	1206	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1207	ENDIF
	1208	ELSE
	1209	q_init(k) = q_init(k-1)
	1210	ENDIF
[72]	1211	!
	1212	!-- Avoid negative humidities
	1213	IF ( q_init(k) < 0.0 ) THEN
	1214	q_init(k) = 0.0
	1215	ENDIF
[1]	1216	ENDDO
	1217
	1218	!
	1219	!-- In case of no given humidity gradients, choose zero gradient
	1220	!-- conditions
	1221	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1222	q_vertical_gradient_level(1) = 0.0
	1223	ENDIF
	1224
[1053]	1225	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
	1226
	1227	i = 1
	1228	gradient = 0.0
	1229	qr_vertical_gradient_level_ind(1) = 0
	1230	DO k = 1, nzt+1
	1231	IF ( i < 11 ) THEN
	1232	IF ( qr_vertical_gradient_level(i) < zu(k) .AND. &
	1233	qr_vertical_gradient_level(i) >= 0.0 ) THEN
	1234	gradient = qr_vertical_gradient(i) / 100.0
	1235	qr_vertical_gradient_level_ind(i) = k - 1
	1236	i = i + 1
	1237	ENDIF
	1238	ENDIF
	1239	IF ( gradient /= 0.0 ) THEN
	1240	IF ( k /= 1 ) THEN
	1241	qr_init(k) = qr_init(k-1) + dzu(k) * gradient
	1242	ELSE
	1243	qr_init(k) = qr_init(k-1) + 0.5 * dzu(k) * gradient
	1244	ENDIF
	1245	ELSE
	1246	qr_init(k) = qr_init(k-1)
	1247	ENDIF
[1]	1248	!
[1053]	1249	!-- Avoid negative rain water content
	1250	IF ( qr_init(k) < 0.0 ) THEN
	1251	qr_init(k) = 0.0
	1252	ENDIF
	1253	ENDDO
	1254	!
	1255	!-- In case of no given rain water content gradients, choose zero gradient
	1256	!-- conditions
	1257	IF ( qr_vertical_gradient_level(1) == -1.0 ) THEN
	1258	qr_vertical_gradient_level(1) = 0.0
	1259	ENDIF
[1]	1260
[1053]	1261	i = 1
	1262	gradient = 0.0
	1263	nr_vertical_gradient_level_ind(1) = 0
	1264	DO k = 1, nzt+1
	1265	IF ( i < 11 ) THEN
	1266	IF ( nr_vertical_gradient_level(i) < zu(k) .AND. &
	1267	nr_vertical_gradient_level(i) >= 0.0 ) THEN
	1268	gradient = nr_vertical_gradient(i) / 100.0
	1269	nr_vertical_gradient_level_ind(i) = k - 1
	1270	i = i + 1
	1271	ENDIF
	1272	ENDIF
	1273	IF ( gradient /= 0.0 ) THEN
	1274	IF ( k /= 1 ) THEN
	1275	nr_init(k) = nr_init(k-1) + dzu(k) * gradient
	1276	ELSE
	1277	nr_init(k) = nr_init(k-1) + 0.5 * dzu(k) * gradient
	1278	ENDIF
	1279	ELSE
	1280	nr_init(k) = nr_init(k-1)
	1281	ENDIF
	1282	!
	1283	!-- Avoid negative rain water content
	1284	IF ( nr_init(k) < 0.0 ) THEN
	1285	nr_init(k) = 0.0
	1286	ENDIF
	1287	ENDDO
	1288	!
	1289	!-- In case of no given rain water content gradients, choose zero gradient
	1290	!-- conditions
	1291	IF ( nr_vertical_gradient_level(1) == -1.0 ) THEN
	1292	nr_vertical_gradient_level(1) = 0.0
	1293	ENDIF
	1294
	1295	ENDIF
	1296	!
	1297	!-- Store humidity, rain water content and rain drop concentration
	1298	!-- gradient at the top boundary for possile Neumann boundary condition
	1299	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
	1300
	1301	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
	1302	bc_qr_t_val = ( qr_init(nzt+1) - qr_init(nzt) ) / dzu(nzt+1)
	1303	bc_nr_t_val = ( nr_init(nzt+1) - nr_init(nzt) ) / dzu(nzt+1)
	1304	ENDIF
	1305
[1]	1306	ENDIF
	1307
[94]	1308	!
	1309	!-- If required, compute initial salinity profile using the given salinity
	1310	!-- gradients
	1311	IF ( ocean ) THEN
	1312
	1313	i = 1
	1314	gradient = 0.0
	1315
	1316	sa_vertical_gradient_level_ind(1) = nzt+1
	1317	DO k = nzt, 0, -1
[177]	1318	IF ( i < 11 ) THEN
	1319	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1320	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1321	gradient = sa_vertical_gradient(i) / 100.0
	1322	sa_vertical_gradient_level_ind(i) = k + 1
	1323	i = i + 1
[94]	1324	ENDIF
	1325	ENDIF
	1326	IF ( gradient /= 0.0 ) THEN
	1327	IF ( k /= nzt ) THEN
	1328	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1329	ELSE
	1330	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1331	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1332	ENDIF
	1333	ELSE
	1334	sa_init(k) = sa_init(k+1)
	1335	ENDIF
	1336	ENDDO
	1337
	1338	ENDIF
	1339
[138]	1340	!
[388]	1341	!-- If required compute the profile of leaf area density used in the plant
	1342	!-- canopy model
[138]	1343	IF ( plant_canopy ) THEN
	1344
	1345	i = 1
	1346	gradient = 0.0
[1]	1347
[138]	1348	IF ( .NOT. ocean ) THEN
[153]	1349
	1350	lad(0) = lad_surface
[138]	1351
	1352	lad_vertical_gradient_level_ind(1) = 0
	1353	DO k = 1, pch_index
[177]	1354	IF ( i < 11 ) THEN
	1355	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1356	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1357	gradient = lad_vertical_gradient(i)
	1358	lad_vertical_gradient_level_ind(i) = k - 1
	1359	i = i + 1
[138]	1360	ENDIF
	1361	ENDIF
	1362	IF ( gradient /= 0.0 ) THEN
	1363	IF ( k /= 1 ) THEN
	1364	lad(k) = lad(k-1) + dzu(k) * gradient
	1365	ELSE
	1366	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1367	ENDIF
	1368	ELSE
	1369	lad(k) = lad(k-1)
	1370	ENDIF
	1371	ENDDO
	1372
	1373	ENDIF
	1374
[1]	1375	!
[388]	1376	!-- In case of no given leaf area density gradients, choose a vanishing
	1377	!-- gradient
[138]	1378	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1379	lad_vertical_gradient_level(1) = 0.0
	1380	ENDIF
	1381
	1382	ENDIF
	1383
	1384	ENDIF
[411]	1385
	1386	!
	1387	!-- Initialize large scale subsidence if required
[580]	1388	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1389	large_scale_subsidence = .TRUE.
	1390	CALL init_w_subsidence
	1391	END IF
	1392
[138]	1393
[667]	1394
[138]	1395	!
[1]	1396	!-- Compute Coriolis parameter
	1397	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1398	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1399
	1400	!
[97]	1401	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1402	!-- set the reference temperature equal to the surface temperature.
	1403	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1404
	1405	!
[97]	1406	!-- Reference value has to be used in buoyancy terms
	1407	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1408
	1409	!
	1410	!-- Sign of buoyancy/stability terms
	1411	IF ( ocean ) atmos_ocean_sign = -1.0
	1412
	1413	!
[108]	1414	!-- Ocean version must use flux boundary conditions at the top
	1415	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1416	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1417	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1418	ENDIF
[97]	1419
	1420	!
[1]	1421	!-- In case of a given slope, compute the relevant quantities
	1422	IF ( alpha_surface /= 0.0 ) THEN
	1423	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1424	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1425	' ) must be < 90.0'
[226]	1426	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1427	ENDIF
	1428	sloping_surface = .TRUE.
	1429	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1430	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1431	ENDIF
	1432
	1433	!
	1434	!-- Check time step and cfl_factor
	1435	IF ( dt /= -1.0 ) THEN
	1436	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1437	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1438	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1439	ENDIF
	1440	dt_3d = dt
	1441	dt_fixed = .TRUE.
	1442	ENDIF
	1443
	1444	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1445	IF ( cfl_factor == -1.0 ) THEN
[1001]	1446	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
[1]	1447	cfl_factor = 0.8
[1001]	1448	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1449	cfl_factor = 0.9
[1]	1450	ELSE
[1001]	1451	cfl_factor = 0.9
[1]	1452	ENDIF
	1453	ELSE
[215]	1454	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1455	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1456	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1457	ENDIF
	1458	ENDIF
	1459
	1460	!
	1461	!-- Store simulated time at begin
	1462	simulated_time_at_begin = simulated_time
	1463
	1464	!
[291]	1465	!-- Store reference time for coupled runs and change the coupling flag,
	1466	!-- if ...
	1467	IF ( simulated_time == 0.0 ) THEN
	1468	IF ( coupling_start_time == 0.0 ) THEN
	1469	time_since_reference_point = 0.0
	1470	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1471	run_coupled = .FALSE.
	1472	ENDIF
	1473	ENDIF
	1474
	1475	!
[1]	1476	!-- Set wind speed in the Galilei-transformed system
	1477	IF ( galilei_transformation ) THEN
[1053]	1478	IF ( use_ug_for_galilei_tr .AND. &
	1479	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1480	ug_vertical_gradient(1) == 0.0 .AND. &
	1481	vg_vertical_gradient_level(1) == 0.0 .AND. &
	1482	vg_vertical_gradient(1) == 0.0 ) THEN
[866]	1483	u_gtrans = ug_surface * 0.6
	1484	v_gtrans = vg_surface * 0.6
[1053]	1485	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1486	( ug_vertical_gradient_level(1) /= 0.0 .OR. &
	1487	ug_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1488	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1489	' with galilei transformation'
[226]	1490	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1053]	1491	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1492	( vg_vertical_gradient_level(1) /= 0.0 .OR. &
	1493	vg_vertical_gradient(1) /= 0.0 ) ) THEN
[215]	1494	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1495	' with galilei transformation'
[226]	1496	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1497	ELSE
[215]	1498	message_string = 'variable translation speed used for galilei-' // &
	1499	'transformation, which may cause & instabilities in stably ' // &
	1500	'stratified regions'
[226]	1501	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1502	ENDIF
	1503	ENDIF
	1504
	1505	!
	1506	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1507	!-- fluxes have to be used in the diffusion-terms
	1508	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1509
	1510	!
	1511	!-- Check boundary conditions and set internal variables:
	1512	!-- Lateral boundary conditions
[73]	1513	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
[978]	1514	bc_lr /= 'radiation/dirichlet' .AND. bc_lr /= 'dirichlet/neumann' &
	1515	.AND. bc_lr /= 'neumann/dirichlet' ) THEN
[215]	1516	message_string = 'unknown boundary condition: bc_lr = "' // &
	1517	TRIM( bc_lr ) // '"'
[226]	1518	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1519	ENDIF
[73]	1520	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
[978]	1521	bc_ns /= 'radiation/dirichlet' .AND. bc_ns /= 'dirichlet/neumann' &
	1522	.AND. bc_ns /= 'neumann/dirichlet' ) THEN
[215]	1523	message_string = 'unknown boundary condition: bc_ns = "' // &
	1524	TRIM( bc_ns ) // '"'
[226]	1525	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1526	ENDIF
	1527
	1528	!
[366]	1529	!-- Internal variables used for speed optimization in if clauses
[707]	1530	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1531	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1532	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
[978]	1533	IF ( bc_lr == 'dirichlet/neumann' ) bc_lr_dirneu = .TRUE.
	1534	IF ( bc_lr == 'neumann/dirichlet' ) bc_lr_neudir = .TRUE.
[707]	1535	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1536	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1537	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[978]	1538	IF ( bc_ns == 'dirichlet/neumann' ) bc_ns_dirneu = .TRUE.
	1539	IF ( bc_ns == 'neumann/dirichlet' ) bc_ns_neudir = .TRUE.
[366]	1540
	1541	!
[1]	1542	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1543	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1544	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1545	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1546	IF ( psolver /= 'multigrid' ) THEN
[215]	1547	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1548	'psolver = "' // TRIM( psolver ) // '"'
[226]	1549	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1550	ENDIF
[667]	1551	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1552	momentum_advec /= 'ws-scheme') THEN
[215]	1553	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1554	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1555	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1556	ENDIF
[667]	1557	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1558	scalar_advec /= 'ws-scheme' ) THEN
[215]	1559	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1560	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1561	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1562	ENDIF
	1563	IF ( galilei_transformation ) THEN
[215]	1564	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1565	'galilei_transformation = .T.'
[226]	1566	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1567	ENDIF
	1568	ENDIF
	1569
	1570	!
	1571	!-- Bottom boundary condition for the turbulent Kinetic energy
	1572	IF ( bc_e_b == 'neumann' ) THEN
	1573	ibc_e_b = 1
	1574	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1575	ibc_e_b = 2
[1015]	1576	IF ( prandtl_layer ) THEN
	1577	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
[215]	1578	TRIM( bc_e_b ) // '"'
[226]	1579	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1580	ENDIF
	1581	IF ( .NOT. prandtl_layer ) THEN
	1582	bc_e_b = 'neumann'
	1583	ibc_e_b = 1
[215]	1584	message_string = 'boundary condition bc_e_b changed to "' // &
	1585	TRIM( bc_e_b ) // '"'
[226]	1586	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1587	ENDIF
	1588	ELSE
[215]	1589	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1590	TRIM( bc_e_b ) // '"'
[226]	1591	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1592	ENDIF
	1593
	1594	!
	1595	!-- Boundary conditions for perturbation pressure
	1596	IF ( bc_p_b == 'dirichlet' ) THEN
	1597	ibc_p_b = 0
	1598	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1599	ibc_p_b = 1
	1600	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1601	ibc_p_b = 2
	1602	ELSE
[215]	1603	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1604	TRIM( bc_p_b ) // '"'
[226]	1605	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1606	ENDIF
	1607	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1608	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1609	'" not allowed with prandtl_layer = .FALSE.'
[226]	1610	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1611	ENDIF
	1612	IF ( bc_p_t == 'dirichlet' ) THEN
	1613	ibc_p_t = 0
	1614	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1615	ibc_p_t = 1
	1616	ELSE
[215]	1617	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1618	TRIM( bc_p_t ) // '"'
[226]	1619	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1620	ENDIF
	1621
	1622	!
	1623	!-- Boundary conditions for potential temperature
[102]	1624	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1625	ibc_pt_b = 2
[1]	1626	ELSE
[102]	1627	IF ( bc_pt_b == 'dirichlet' ) THEN
	1628	ibc_pt_b = 0
	1629	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1630	ibc_pt_b = 1
	1631	ELSE
[215]	1632	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1633	TRIM( bc_pt_b ) // '"'
[226]	1634	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1635	ENDIF
	1636	ENDIF
[102]	1637
[1]	1638	IF ( bc_pt_t == 'dirichlet' ) THEN
	1639	ibc_pt_t = 0
	1640	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1641	ibc_pt_t = 1
[19]	1642	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1643	ibc_pt_t = 2
[1]	1644	ELSE
[215]	1645	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1646	TRIM( bc_pt_t ) // '"'
[226]	1647	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1648	ENDIF
	1649
[20]	1650	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1651	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[940]	1652
	1653	IF ( neutral ) THEN
	1654
	1655	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
	1656	THEN
	1657	message_string = 'heatflux must not be set for pure neutral flow'
	1658	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1659	ENDIF
	1660
	1661	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
	1662	THEN
	1663	message_string = 'heatflux must not be set for pure neutral flow'
	1664	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1665	ENDIF
	1666
	1667	ENDIF
	1668
[103]	1669	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1670	top_momentumflux_v /= 9999999.9 ) THEN
	1671	constant_top_momentumflux = .TRUE.
	1672	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1673	top_momentumflux_v == 9999999.9 ) ) THEN
	1674	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1675	'must be set'
[226]	1676	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1677	ENDIF
[1]	1678
	1679	!
	1680	!-- A given surface temperature implies Dirichlet boundary condition for
	1681	!-- temperature. In this case specification of a constant heat flux is
	1682	!-- forbidden.
	1683	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1684	surface_heatflux /= 0.0 ) THEN
[215]	1685	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1686	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1687	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1688	ENDIF
	1689	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1690	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1691	'wed with pt_surface_initial_change (/=0) = ', &
	1692	pt_surface_initial_change
[226]	1693	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1694	ENDIF
	1695
	1696	!
[19]	1697	!-- A given temperature at the top implies Dirichlet boundary condition for
	1698	!-- temperature. In this case specification of a constant heat flux is
	1699	!-- forbidden.
	1700	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1701	top_heatflux /= 0.0 ) THEN
[215]	1702	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1703	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1704	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1705	ENDIF
	1706
	1707	!
[95]	1708	!-- Boundary conditions for salinity
	1709	IF ( ocean ) THEN
	1710	IF ( bc_sa_t == 'dirichlet' ) THEN
	1711	ibc_sa_t = 0
	1712	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1713	ibc_sa_t = 1
	1714	ELSE
[215]	1715	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1716	TRIM( bc_sa_t ) // '"'
[226]	1717	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1718	ENDIF
	1719
	1720	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1721	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1722	message_string = 'boundary condition: bc_sa_t = "' // &
	1723	TRIM( bc_sa_t ) // '" requires to set ' // &
	1724	'top_salinityflux'
[226]	1725	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1726	ENDIF
[95]	1727
	1728	!
	1729	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1730	!-- salinity. In this case specification of a constant salinity flux is
	1731	!-- forbidden.
	1732	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1733	top_salinityflux /= 0.0 ) THEN
[215]	1734	message_string = 'boundary condition: bc_sa_t = "' // &
	1735	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1736	'constant_top_salinityflux = .TRUE.'
[226]	1737	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1738	ENDIF
	1739
	1740	ENDIF
	1741
	1742	!
[75]	1743	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1744	!-- water content / scalar
[75]	1745	IF ( humidity .OR. passive_scalar ) THEN
	1746	IF ( humidity ) THEN
[1]	1747	sq = 'q'
	1748	ELSE
	1749	sq = 's'
	1750	ENDIF
	1751	IF ( bc_q_b == 'dirichlet' ) THEN
	1752	ibc_q_b = 0
	1753	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1754	ibc_q_b = 1
	1755	ELSE
[215]	1756	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1757	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1758	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1759	ENDIF
	1760	IF ( bc_q_t == 'dirichlet' ) THEN
	1761	ibc_q_t = 0
	1762	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1763	ibc_q_t = 1
	1764	ELSE
[215]	1765	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1766	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1767	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1768	ENDIF
	1769
[600]	1770	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1771
	1772	!
	1773	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1774	!-- humidity. In this case specification of a constant water flux is
[1]	1775	!-- forbidden.
	1776	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1777	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1778	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1779	'th prescribed surface flux'
[226]	1780	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1781	ENDIF
	1782	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1783	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1784	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1785	q_surface_initial_change
[226]	1786	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1787	ENDIF
[1053]	1788
	1789	IF ( cloud_physics .AND. icloud_scheme == 0 ) THEN
	1790	IF ( bc_qr_b == 'dirichlet' ) THEN
	1791	ibc_qr_b = 0
	1792	ELSEIF ( bc_qr_b == 'neumann' ) THEN
	1793	ibc_qr_b = 1
	1794	ELSE
	1795	message_string = 'unknown boundary condition: bc_qr_b ="' // &
	1796	TRIM( bc_qr_b ) // '"'
	1797	CALL message( 'check_parameters', 'PA0352', 1, 2, 0, 6, 0 )
	1798	ENDIF
	1799	IF ( bc_qr_t == 'dirichlet' ) THEN
	1800	ibc_qr_t = 0
	1801	ELSEIF ( bc_qr_t == 'neumann' ) THEN
	1802	ibc_qr_t = 1
	1803	ELSE
	1804	message_string = 'unknown boundary condition: bc_qr_t ="' // &
	1805	TRIM( bc_qr_t ) // '"'
	1806	CALL message( 'check_parameters', 'PA0353', 1, 2, 0, 6, 0 )
	1807	ENDIF
	1808	IF ( bc_nr_b == 'dirichlet' ) THEN
	1809	ibc_nr_b = 0
	1810	ELSEIF ( bc_nr_b == 'neumann' ) THEN
	1811	ibc_nr_b = 1
	1812	ELSE
	1813	message_string = 'unknown boundary condition: bc_nr_b ="' // &
	1814	TRIM( bc_nr_b ) // '"'
	1815	CALL message( 'check_parameters', 'PA0355', 1, 2, 0, 6, 0 )
	1816	ENDIF
	1817	IF ( bc_nr_t == 'dirichlet' ) THEN
	1818	ibc_nr_t = 0
	1819	ELSEIF ( bc_nr_t == 'neumann' ) THEN
	1820	ibc_nr_t = 1
	1821	ELSE
	1822	message_string = 'unknown boundary condition: bc_nr_t ="' // &
	1823	TRIM( bc_nr_t ) // '"'
	1824	CALL message( 'check_parameters', 'PA0356', 1, 2, 0, 6, 0 )
	1825	ENDIF
	1826	ENDIF
	1827
[1]	1828	ENDIF
	1829
	1830	!
	1831	!-- Boundary conditions for horizontal components of wind speed
	1832	IF ( bc_uv_b == 'dirichlet' ) THEN
	1833	ibc_uv_b = 0
	1834	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1835	ibc_uv_b = 1
	1836	IF ( prandtl_layer ) THEN
[215]	1837	message_string = 'boundary condition: bc_uv_b = "' // &
	1838	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1839	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1840	ENDIF
	1841	ELSE
[215]	1842	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1843	TRIM( bc_uv_b ) // '"'
[226]	1844	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1845	ENDIF
[667]	1846	!
	1847	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1848	!-- assigned with the u and v values of the ocean surface
	1849	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1850	ibc_uv_b = 2
	1851	ENDIF
[215]	1852
[108]	1853	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1854	bc_uv_t = 'neumann'
[1]	1855	ibc_uv_t = 1
	1856	ELSE
[132]	1857	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1858	ibc_uv_t = 0
[767]	1859	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1860	!
	1861	!-- Velocities for the initial u,v-profiles are set zero at the top
	1862	!-- in case of dirichlet_0 conditions
	1863	u_init(nzt+1) = 0.0
	1864	v_init(nzt+1) = 0.0
	1865	ENDIF
[108]	1866	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1867	ibc_uv_t = 1
	1868	ELSE
[215]	1869	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1870	TRIM( bc_uv_t ) // '"'
[226]	1871	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1872	ENDIF
	1873	ENDIF
	1874
	1875	!
	1876	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1877	IF ( rayleigh_damping_factor == -1.0 ) THEN
[1001]	1878	rayleigh_damping_factor = 0.0
[1]	1879	ELSE
	1880	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1881	THEN
[215]	1882	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1883	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1884	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1885	ENDIF
	1886	ENDIF
	1887
	1888	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1889	IF ( .NOT. ocean ) THEN
	1890	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1891	ELSE
	1892	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1893	ENDIF
[1]	1894	ELSE
[108]	1895	IF ( .NOT. ocean ) THEN
	1896	IF ( rayleigh_damping_height < 0.0 .OR. &
	1897	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1898	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1899	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1900	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1901	ENDIF
[108]	1902	ELSE
	1903	IF ( rayleigh_damping_height > 0.0 .OR. &
	1904	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1905	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1906	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1907	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1908	ENDIF
[1]	1909	ENDIF
	1910	ENDIF
	1911
	1912	!
	1913	!-- Check number of chosen statistic regions. More than 10 regions are not
	1914	!-- allowed, because so far no more than 10 corresponding output files can
	1915	!-- be opened (cf. check_open)
	1916	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1917	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1918	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1919	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1920	ENDIF
	1921	IF ( normalizing_region > statistic_regions .OR. &
	1922	normalizing_region < 0) THEN
[215]	1923	WRITE ( message_string, * ) 'normalizing_region = ', &
	1924	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1925	' (value of statistic_regions)'
[226]	1926	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1927	ENDIF
	1928
	1929	!
[116]	1930	!-- Check the interval for sorting particles.
	1931	!-- Using particles as cloud droplets requires sorting after each timestep.
	1932	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1933	dt_sort_particles = 0.0
[215]	1934	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1935	'_droplets = .TRUE.'
[226]	1936	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1937	ENDIF
	1938
	1939	!
[1]	1940	!-- Set the default intervals for data output, if necessary
	1941	!-- NOTE: dt_dosp has already been set in package_parin
	1942	IF ( dt_data_output /= 9999999.9 ) THEN
	1943	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1944	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1945	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1946	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1947	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1948	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1949	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1950	DO mid = 1, max_masks
[410]	1951	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1952	ENDDO
[1]	1953	ENDIF
	1954
	1955	!
	1956	!-- Set the default skip time intervals for data output, if necessary
	1957	IF ( skip_time_dopr == 9999999.9 ) &
	1958	skip_time_dopr = skip_time_data_output
	1959	IF ( skip_time_dosp == 9999999.9 ) &
	1960	skip_time_dosp = skip_time_data_output
	1961	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1962	skip_time_do2d_xy = skip_time_data_output
	1963	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1964	skip_time_do2d_xz = skip_time_data_output
	1965	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1966	skip_time_do2d_yz = skip_time_data_output
	1967	IF ( skip_time_do3d == 9999999.9 ) &
	1968	skip_time_do3d = skip_time_data_output
	1969	IF ( skip_time_data_output_av == 9999999.9 ) &
	1970	skip_time_data_output_av = skip_time_data_output
[564]	1971	DO mid = 1, max_masks
[410]	1972	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1973	skip_time_domask(mid) = skip_time_data_output
	1974	ENDDO
[1]	1975
	1976	!
	1977	!-- Check the average intervals (first for 3d-data, then for profiles and
	1978	!-- spectra)
	1979	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1980	WRITE( message_string, * ) 'averaging_interval = ', &
	1981	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1982	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1983	ENDIF
	1984
	1985	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1986	averaging_interval_pr = averaging_interval
	1987	ENDIF
	1988
	1989	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1990	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1991	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1992	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1993	ENDIF
	1994
	1995	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1996	averaging_interval_sp = averaging_interval
	1997	ENDIF
	1998
	1999	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	2000	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	2001	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	2002	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	2003	ENDIF
	2004
	2005	!
	2006	!-- Set the default interval for profiles entering the temporal average
	2007	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	2008	dt_averaging_input_pr = dt_averaging_input
	2009	ENDIF
	2010
	2011	!
	2012	!-- Set the default interval for the output of timeseries to a reasonable
	2013	!-- value (tries to minimize the number of calls of flow_statistics)
	2014	IF ( dt_dots == 9999999.9 ) THEN
	2015	IF ( averaging_interval_pr == 0.0 ) THEN
	2016	dt_dots = MIN( dt_run_control, dt_dopr )
	2017	ELSE
	2018	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	2019	ENDIF
	2020	ENDIF
	2021
	2022	!
	2023	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	2024	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	2025	WRITE( message_string, * ) 'dt_averaging_input = ', &
	2026	dt_averaging_input, ' must be <= averaging_interval = ', &
	2027	averaging_interval
[226]	2028	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	2029	ENDIF
	2030
	2031	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	2032	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	2033	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	2034	averaging_interval_pr
[226]	2035	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	2036	ENDIF
	2037
	2038	!
[72]	2039	!-- Set the default value for the integration interval of precipitation amount
	2040	IF ( precipitation ) THEN
	2041	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	2042	precipitation_amount_interval = dt_do2d_xy
	2043	ELSE
	2044	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	2045	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	2046	precipitation_amount_interval, ' must not be larger than ', &
	2047	'dt_do2d_xy = ', dt_do2d_xy
[226]	2048	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	2049	ENDIF
	2050	ENDIF
	2051	ENDIF
	2052
	2053	!
[1]	2054	!-- Determine the number of output profiles and check whether they are
	2055	!-- permissible
	2056	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	2057
	2058	dopr_n = dopr_n + 1
	2059	i = dopr_n
	2060
	2061	!
	2062	!-- Determine internal profile number (for hom, homs)
	2063	!-- and store height levels
	2064	SELECT CASE ( TRIM( data_output_pr(i) ) )
	2065
	2066	CASE ( 'u', '#u' )
	2067	dopr_index(i) = 1
[87]	2068	dopr_unit(i) = 'm/s'
[1]	2069	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	2070	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2071	dopr_initial_index(i) = 5
	2072	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	2073	data_output_pr(i) = data_output_pr(i)(2:)
	2074	ENDIF
	2075
	2076	CASE ( 'v', '#v' )
	2077	dopr_index(i) = 2
[87]	2078	dopr_unit(i) = 'm/s'
	2079	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2080	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2081	dopr_initial_index(i) = 6
	2082	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	2083	data_output_pr(i) = data_output_pr(i)(2:)
	2084	ENDIF
	2085
	2086	CASE ( 'w' )
	2087	dopr_index(i) = 3
[87]	2088	dopr_unit(i) = 'm/s'
	2089	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2090
	2091	CASE ( 'pt', '#pt' )
	2092	IF ( .NOT. cloud_physics ) THEN
	2093	dopr_index(i) = 4
[87]	2094	dopr_unit(i) = 'K'
[1]	2095	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2096	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2097	dopr_initial_index(i) = 7
	2098	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2099	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	2100	data_output_pr(i) = data_output_pr(i)(2:)
	2101	ENDIF
	2102	ELSE
	2103	dopr_index(i) = 43
[87]	2104	dopr_unit(i) = 'K'
[1]	2105	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	2106	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2107	dopr_initial_index(i) = 28
	2108	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	2109	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	2110	data_output_pr(i) = data_output_pr(i)(2:)
	2111	ENDIF
	2112	ENDIF
	2113
	2114	CASE ( 'e' )
	2115	dopr_index(i) = 8
[87]	2116	dopr_unit(i) = 'm2/s2'
[1]	2117	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	2118	hom(nzb,2,8,:) = 0.0
	2119
	2120	CASE ( 'km', '#km' )
	2121	dopr_index(i) = 9
[87]	2122	dopr_unit(i) = 'm2/s'
[1]	2123	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	2124	hom(nzb,2,9,:) = 0.0
	2125	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2126	dopr_initial_index(i) = 23
	2127	hom(:,2,23,:) = hom(:,2,9,:)
	2128	data_output_pr(i) = data_output_pr(i)(2:)
	2129	ENDIF
	2130
	2131	CASE ( 'kh', '#kh' )
	2132	dopr_index(i) = 10
[87]	2133	dopr_unit(i) = 'm2/s'
[1]	2134	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	2135	hom(nzb,2,10,:) = 0.0
	2136	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2137	dopr_initial_index(i) = 24
	2138	hom(:,2,24,:) = hom(:,2,10,:)
	2139	data_output_pr(i) = data_output_pr(i)(2:)
	2140	ENDIF
	2141
	2142	CASE ( 'l', '#l' )
	2143	dopr_index(i) = 11
[87]	2144	dopr_unit(i) = 'm'
[1]	2145	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	2146	hom(nzb,2,11,:) = 0.0
	2147	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2148	dopr_initial_index(i) = 25
	2149	hom(:,2,25,:) = hom(:,2,11,:)
	2150	data_output_pr(i) = data_output_pr(i)(2:)
	2151	ENDIF
	2152
	2153	CASE ( 'w"u"' )
	2154	dopr_index(i) = 12
[87]	2155	dopr_unit(i) = 'm2/s2'
[1]	2156	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	2157	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	2158
	2159	CASE ( 'wu' )
	2160	dopr_index(i) = 13
[87]	2161	dopr_unit(i) = 'm2/s2'
[1]	2162	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	2163
	2164	CASE ( 'w"v"' )
	2165	dopr_index(i) = 14
[87]	2166	dopr_unit(i) = 'm2/s2'
[1]	2167	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	2168	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	2169
	2170	CASE ( 'wv' )
	2171	dopr_index(i) = 15
[87]	2172	dopr_unit(i) = 'm2/s2'
[1]	2173	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	2174
	2175	CASE ( 'w"pt"' )
	2176	dopr_index(i) = 16
[87]	2177	dopr_unit(i) = 'K m/s'
[1]	2178	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	2179
	2180	CASE ( 'wpt' )
	2181	dopr_index(i) = 17
[87]	2182	dopr_unit(i) = 'K m/s'
[1]	2183	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	2184
	2185	CASE ( 'wpt' )
	2186	dopr_index(i) = 18
[87]	2187	dopr_unit(i) = 'K m/s'
[1]	2188	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	2189
	2190	CASE ( 'wu' )
	2191	dopr_index(i) = 19
[87]	2192	dopr_unit(i) = 'm2/s2'
[1]	2193	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	2194	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	2195
	2196	CASE ( 'wv' )
	2197	dopr_index(i) = 20
[87]	2198	dopr_unit(i) = 'm2/s2'
[1]	2199	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2200	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2201
	2202	CASE ( 'wptBC' )
	2203	dopr_index(i) = 21
[87]	2204	dopr_unit(i) = 'K m/s'
[1]	2205	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2206
	2207	CASE ( 'wptBC' )
	2208	dopr_index(i) = 22
[87]	2209	dopr_unit(i) = 'K m/s'
[1]	2210	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2211
[96]	2212	CASE ( 'sa', '#sa' )
	2213	IF ( .NOT. ocean ) THEN
[215]	2214	message_string = 'data_output_pr = ' // &
	2215	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2216	'lemented for ocean = .FALSE.'
[226]	2217	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2218	ELSE
	2219	dopr_index(i) = 23
	2220	dopr_unit(i) = 'psu'
	2221	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2222	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2223	dopr_initial_index(i) = 26
	2224	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2225	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2226	data_output_pr(i) = data_output_pr(i)(2:)
	2227	ENDIF
	2228	ENDIF
	2229
[1]	2230	CASE ( 'u*2' )
	2231	dopr_index(i) = 30
[87]	2232	dopr_unit(i) = 'm2/s2'
[1]	2233	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2234
	2235	CASE ( 'v*2' )
	2236	dopr_index(i) = 31
[87]	2237	dopr_unit(i) = 'm2/s2'
[1]	2238	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2239
	2240	CASE ( 'w*2' )
	2241	dopr_index(i) = 32
[87]	2242	dopr_unit(i) = 'm2/s2'
[1]	2243	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2244
	2245	CASE ( 'pt*2' )
	2246	dopr_index(i) = 33
[87]	2247	dopr_unit(i) = 'K2'
[1]	2248	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2249
	2250	CASE ( 'e*' )
	2251	dopr_index(i) = 34
[87]	2252	dopr_unit(i) = 'm2/s2'
[1]	2253	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2254
	2255	CASE ( 'w2pt' )
	2256	dopr_index(i) = 35
[87]	2257	dopr_unit(i) = 'K m2/s2'
[1]	2258	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2259
	2260	CASE ( 'wpt2' )
	2261	dopr_index(i) = 36
[87]	2262	dopr_unit(i) = 'K2 m/s'
[1]	2263	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2264
	2265	CASE ( 'we' )
	2266	dopr_index(i) = 37
[87]	2267	dopr_unit(i) = 'm3/s3'
[1]	2268	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2269
	2270	CASE ( 'w*3' )
	2271	dopr_index(i) = 38
[87]	2272	dopr_unit(i) = 'm3/s3'
[1]	2273	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2274
	2275	CASE ( 'Sw' )
	2276	dopr_index(i) = 39
[89]	2277	dopr_unit(i) = 'none'
[1]	2278	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2279
[232]	2280	CASE ( 'p' )
	2281	dopr_index(i) = 40
	2282	dopr_unit(i) = 'Pa'
	2283	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2284
[1]	2285	CASE ( 'q', '#q' )
[108]	2286	IF ( .NOT. humidity ) THEN
[215]	2287	message_string = 'data_output_pr = ' // &
	2288	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2289	'lemented for humidity = .FALSE.'
[226]	2290	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2291	ELSE
	2292	dopr_index(i) = 41
[87]	2293	dopr_unit(i) = 'kg/kg'
	2294	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2295	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2296	dopr_initial_index(i) = 26
	2297	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2298	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2299	data_output_pr(i) = data_output_pr(i)(2:)
	2300	ENDIF
	2301	ENDIF
	2302
	2303	CASE ( 's', '#s' )
	2304	IF ( .NOT. passive_scalar ) THEN
[215]	2305	message_string = 'data_output_pr = ' // &
	2306	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2307	'lemented for passive_scalar = .FALSE.'
[226]	2308	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2309	ELSE
	2310	dopr_index(i) = 41
[87]	2311	dopr_unit(i) = 'kg/m3'
	2312	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2313	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2314	dopr_initial_index(i) = 26
	2315	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2316	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2317	data_output_pr(i) = data_output_pr(i)(2:)
	2318	ENDIF
	2319	ENDIF
	2320
	2321	CASE ( 'qv', '#qv' )
	2322	IF ( .NOT. cloud_physics ) THEN
	2323	dopr_index(i) = 41
[87]	2324	dopr_unit(i) = 'kg/kg'
	2325	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2326	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2327	dopr_initial_index(i) = 26
	2328	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2329	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2330	data_output_pr(i) = data_output_pr(i)(2:)
	2331	ENDIF
	2332	ELSE
	2333	dopr_index(i) = 42
[87]	2334	dopr_unit(i) = 'kg/kg'
	2335	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2336	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2337	dopr_initial_index(i) = 27
	2338	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2339	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2340	data_output_pr(i) = data_output_pr(i)(2:)
	2341	ENDIF
	2342	ENDIF
	2343
	2344	CASE ( 'lpt', '#lpt' )
	2345	IF ( .NOT. cloud_physics ) THEN
[215]	2346	message_string = 'data_output_pr = ' // &
	2347	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2348	'lemented for cloud_physics = .FALSE.'
[226]	2349	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2350	ELSE
	2351	dopr_index(i) = 4
[87]	2352	dopr_unit(i) = 'K'
[1]	2353	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2354	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2355	dopr_initial_index(i) = 7
	2356	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2357	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2358	data_output_pr(i) = data_output_pr(i)(2:)
	2359	ENDIF
	2360	ENDIF
	2361
	2362	CASE ( 'vpt', '#vpt' )
	2363	dopr_index(i) = 44
[87]	2364	dopr_unit(i) = 'K'
	2365	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2366	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2367	dopr_initial_index(i) = 29
	2368	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2369	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2370	data_output_pr(i) = data_output_pr(i)(2:)
	2371	ENDIF
	2372
	2373	CASE ( 'w"vpt"' )
	2374	dopr_index(i) = 45
[87]	2375	dopr_unit(i) = 'K m/s'
[1]	2376	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2377
	2378	CASE ( 'wvpt' )
	2379	dopr_index(i) = 46
[87]	2380	dopr_unit(i) = 'K m/s'
[1]	2381	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2382
	2383	CASE ( 'wvpt' )
	2384	dopr_index(i) = 47
[87]	2385	dopr_unit(i) = 'K m/s'
[1]	2386	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2387
	2388	CASE ( 'w"q"' )
[108]	2389	IF ( .NOT. humidity ) THEN
[215]	2390	message_string = 'data_output_pr = ' // &
	2391	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2392	'lemented for humidity = .FALSE.'
[226]	2393	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2394	ELSE
	2395	dopr_index(i) = 48
[87]	2396	dopr_unit(i) = 'kg/kg m/s'
[1]	2397	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2398	ENDIF
	2399
	2400	CASE ( 'wq' )
[108]	2401	IF ( .NOT. humidity ) THEN
[215]	2402	message_string = 'data_output_pr = ' // &
	2403	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2404	'lemented for humidity = .FALSE.'
[226]	2405	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2406	ELSE
	2407	dopr_index(i) = 49
[87]	2408	dopr_unit(i) = 'kg/kg m/s'
[1]	2409	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2410	ENDIF
	2411
	2412	CASE ( 'wq' )
[108]	2413	IF ( .NOT. humidity ) THEN
[215]	2414	message_string = 'data_output_pr = ' // &
	2415	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2416	'lemented for humidity = .FALSE.'
[226]	2417	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2418	ELSE
	2419	dopr_index(i) = 50
[87]	2420	dopr_unit(i) = 'kg/kg m/s'
[1]	2421	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2422	ENDIF
	2423
	2424	CASE ( 'w"s"' )
	2425	IF ( .NOT. passive_scalar ) THEN
[215]	2426	message_string = 'data_output_pr = ' // &
	2427	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2428	'lemented for passive_scalar = .FALSE.'
[226]	2429	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2430	ELSE
	2431	dopr_index(i) = 48
[87]	2432	dopr_unit(i) = 'kg/m3 m/s'
[1]	2433	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2434	ENDIF
	2435
	2436	CASE ( 'ws' )
	2437	IF ( .NOT. passive_scalar ) THEN
[215]	2438	message_string = 'data_output_pr = ' // &
	2439	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2440	'lemented for passive_scalar = .FALSE.'
[226]	2441	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2442	ELSE
	2443	dopr_index(i) = 49
[87]	2444	dopr_unit(i) = 'kg/m3 m/s'
[1]	2445	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2446	ENDIF
	2447
	2448	CASE ( 'ws' )
	2449	IF ( .NOT. passive_scalar ) THEN
[215]	2450	message_string = 'data_output_pr = ' // &
	2451	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2452	'lemented for passive_scalar = .FALSE.'
[226]	2453	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2454	ELSE
	2455	dopr_index(i) = 50
[87]	2456	dopr_unit(i) = 'kg/m3 m/s'
[1]	2457	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2458	ENDIF
	2459
	2460	CASE ( 'w"qv"' )
[75]	2461	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2462	THEN
	2463	dopr_index(i) = 48
[87]	2464	dopr_unit(i) = 'kg/kg m/s'
[1]	2465	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2466	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2467	dopr_index(i) = 51
[87]	2468	dopr_unit(i) = 'kg/kg m/s'
[1]	2469	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2470	ELSE
[215]	2471	message_string = 'data_output_pr = ' // &
	2472	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2473	'lemented for cloud_physics = .FALSE. an&' // &
	2474	'd humidity = .FALSE.'
[226]	2475	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2476	ENDIF
	2477
	2478	CASE ( 'wqv' )
[75]	2479	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2480	THEN
	2481	dopr_index(i) = 49
[87]	2482	dopr_unit(i) = 'kg/kg m/s'
[1]	2483	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2484	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2485	dopr_index(i) = 52
[87]	2486	dopr_unit(i) = 'kg/kg m/s'
[1]	2487	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2488	ELSE
[215]	2489	message_string = 'data_output_pr = ' // &
	2490	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2491	'lemented for cloud_physics = .FALSE. an&' // &
	2492	'd humidity = .FALSE.'
[226]	2493	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2494	ENDIF
	2495
	2496	CASE ( 'wqv' )
[75]	2497	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2498	THEN
	2499	dopr_index(i) = 50
[87]	2500	dopr_unit(i) = 'kg/kg m/s'
[1]	2501	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2502	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2503	dopr_index(i) = 53
[87]	2504	dopr_unit(i) = 'kg/kg m/s'
[1]	2505	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2506	ELSE
[215]	2507	message_string = 'data_output_pr = ' // &
	2508	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2509	'lemented for cloud_physics = .FALSE. an&' // &
	2510	'd humidity = .FALSE.'
[226]	2511	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2512	ENDIF
	2513
	2514	CASE ( 'ql' )
	2515	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2516	message_string = 'data_output_pr = ' // &
	2517	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2518	'lemented for cloud_physics = .FALSE. or' // &
	2519	'&cloud_droplets = .FALSE.'
[226]	2520	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2521	ELSE
	2522	dopr_index(i) = 54
[87]	2523	dopr_unit(i) = 'kg/kg'
[1]	2524	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2525	ENDIF
	2526
[524]	2527	CASE ( 'wuu*:dz' )
[1]	2528	dopr_index(i) = 55
[87]	2529	dopr_unit(i) = 'm2/s3'
[1]	2530	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2531
[524]	2532	CASE ( 'wp:dz' )
[1]	2533	dopr_index(i) = 56
[87]	2534	dopr_unit(i) = 'm2/s3'
[106]	2535	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2536
[524]	2537	CASE ( 'w"e:dz' )
[1]	2538	dopr_index(i) = 57
[87]	2539	dopr_unit(i) = 'm2/s3'
[1]	2540	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2541
[667]	2542
[1]	2543	CASE ( 'u"pt"' )
	2544	dopr_index(i) = 58
[87]	2545	dopr_unit(i) = 'K m/s'
[1]	2546	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2547
	2548	CASE ( 'upt' )
	2549	dopr_index(i) = 59
[87]	2550	dopr_unit(i) = 'K m/s'
[1]	2551	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2552
	2553	CASE ( 'upt_t' )
	2554	dopr_index(i) = 60
[87]	2555	dopr_unit(i) = 'K m/s'
[1]	2556	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2557
	2558	CASE ( 'v"pt"' )
	2559	dopr_index(i) = 61
[87]	2560	dopr_unit(i) = 'K m/s'
[1]	2561	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2562
	2563	CASE ( 'vpt' )
	2564	dopr_index(i) = 62
[87]	2565	dopr_unit(i) = 'K m/s'
[1]	2566	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2567
	2568	CASE ( 'vpt_t' )
	2569	dopr_index(i) = 63
[87]	2570	dopr_unit(i) = 'K m/s'
[1]	2571	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2572
[96]	2573	CASE ( 'rho' )
[388]	2574	IF ( .NOT. ocean ) THEN
	2575	message_string = 'data_output_pr = ' // &
	2576	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2577	'lemented for ocean = .FALSE.'
	2578	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2579	ELSE
	2580	dopr_index(i) = 64
	2581	dopr_unit(i) = 'kg/m3'
	2582	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2583	ENDIF
[1]	2584
[96]	2585	CASE ( 'w"sa"' )
	2586	IF ( .NOT. ocean ) THEN
[215]	2587	message_string = 'data_output_pr = ' // &
	2588	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2589	'lemented for ocean = .FALSE.'
[226]	2590	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2591	ELSE
	2592	dopr_index(i) = 65
	2593	dopr_unit(i) = 'psu m/s'
	2594	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2595	ENDIF
	2596
	2597	CASE ( 'wsa' )
	2598	IF ( .NOT. ocean ) THEN
[215]	2599	message_string = 'data_output_pr = ' // &
	2600	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2601	'lemented for ocean = .FALSE.'
[226]	2602	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2603	ELSE
	2604	dopr_index(i) = 66
	2605	dopr_unit(i) = 'psu m/s'
	2606	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2607	ENDIF
	2608
	2609	CASE ( 'wsa' )
	2610	IF ( .NOT. ocean ) THEN
[215]	2611	message_string = 'data_output_pr = ' // &
	2612	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2613	'lemented for ocean = .FALSE.'
[226]	2614	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2615	ELSE
	2616	dopr_index(i) = 67
	2617	dopr_unit(i) = 'psu m/s'
	2618	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2619	ENDIF
	2620
[106]	2621	CASE ( 'wp' )
	2622	dopr_index(i) = 68
	2623	dopr_unit(i) = 'm3/s3'
	2624	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2625
[106]	2626	CASE ( 'w"e' )
	2627	dopr_index(i) = 69
	2628	dopr_unit(i) = 'm3/s3'
	2629	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2630
[197]	2631	CASE ( 'q*2' )
	2632	IF ( .NOT. humidity ) THEN
[215]	2633	message_string = 'data_output_pr = ' // &
	2634	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2635	'lemented for humidity = .FALSE.'
[226]	2636	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2637	ELSE
	2638	dopr_index(i) = 70
	2639	dopr_unit(i) = 'kg2/kg2'
	2640	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2641	ENDIF
[106]	2642
[388]	2643	CASE ( 'prho' )
	2644	IF ( .NOT. ocean ) THEN
	2645	message_string = 'data_output_pr = ' // &
	2646	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2647	'lemented for ocean = .FALSE.'
	2648	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2649	ELSE
	2650	dopr_index(i) = 71
	2651	dopr_unit(i) = 'kg/m3'
	2652	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2653	ENDIF
	2654
	2655	CASE ( 'hyp' )
	2656	dopr_index(i) = 72
[531]	2657	dopr_unit(i) = 'dbar'
[388]	2658	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2659
[1053]	2660	CASE ( 'nr' )
	2661	IF ( .NOT. cloud_physics ) THEN
	2662	message_string = 'data_output_pr = ' // &
	2663	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2664	'lemented for cloud_physics = .FALSE.'
	2665	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2666	ELSEIF ( icloud_scheme /= 0 ) THEN
	2667	message_string = 'data_output_pr = ' // &
	2668	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2669	'lemented for cloud_scheme /= seifert_beheng'
	2670	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2671	ELSE
	2672	dopr_index(i) = 73
	2673	dopr_unit(i) = '1/m3'
	2674	hom(:,2,73,:) = SPREAD( zu, 2, statistic_regions+1 )
	2675	ENDIF
	2676
	2677	CASE ( 'qr' )
	2678	IF ( .NOT. cloud_physics ) THEN
	2679	message_string = 'data_output_pr = ' // &
	2680	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2681	'lemented for cloud_physics = .FALSE.'
	2682	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2683	ELSEIF ( icloud_scheme /= 0 ) THEN
	2684	message_string = 'data_output_pr = ' // &
	2685	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2686	'lemented for cloud_scheme /= seifert_beheng'
	2687	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2688	ELSE
	2689	dopr_index(i) = 74
	2690	dopr_unit(i) = 'kg/kg'
	2691	hom(:,2,74,:) = SPREAD( zu, 2, statistic_regions+1 )
	2692	ENDIF
	2693
	2694	CASE ( 'qc' )
	2695	IF ( .NOT. cloud_physics ) THEN
	2696	message_string = 'data_output_pr = ' // &
	2697	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2698	'lemented for cloud_physics = .FALSE.'
	2699	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2700	ELSEIF ( icloud_scheme /= 0 ) THEN
	2701	message_string = 'data_output_pr = ' // &
	2702	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2703	'lemented for cloud_scheme /= seifert_beheng'
	2704	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2705	ELSE
	2706	dopr_index(i) = 75
	2707	dopr_unit(i) = 'kg/kg'
	2708	hom(:,2,75,:) = SPREAD( zu, 2, statistic_regions+1 )
	2709	ENDIF
	2710
	2711	CASE ( 'prr' )
	2712	IF ( .NOT. cloud_physics ) THEN
	2713	message_string = 'data_output_pr = ' // &
	2714	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2715	'lemented for cloud_physics = .FALSE.'
	2716	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
	2717	ELSEIF ( icloud_scheme /= 0 ) THEN
	2718	message_string = 'data_output_pr = ' // &
	2719	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2720	'lemented for cloud_scheme /= seifert_beheng'
	2721	CALL message( 'check_parameters', 'PA0358', 1, 2, 0, 6, 0 )
	2722	ELSEIF ( .NOT. precipitation ) THEN
	2723	message_string = 'data_output_pr = ' // &
	2724	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2725	'lemented for precipitation = .FALSE.'
	2726	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
	2727
	2728	ELSE
	2729	dopr_index(i) = 76
	2730	dopr_unit(i) = 'kg/kg m/s'
	2731	hom(:,2,76,:) = SPREAD( zu, 2, statistic_regions+1 )
	2732	ENDIF
	2733
[1]	2734	CASE DEFAULT
[87]	2735
	2736	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2737
	2738	IF ( unit == 'illegal' ) THEN
[215]	2739	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2740	message_string = 'illegal value for data_output_pr or ' // &
	2741	'data_output_pr_user = "' // &
	2742	TRIM( data_output_pr(i) ) // '"'
[226]	2743	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2744	ELSE
	2745	message_string = 'illegal value for data_output_pr = "' // &
	2746	TRIM( data_output_pr(i) ) // '"'
[226]	2747	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2748	ENDIF
[1]	2749	ENDIF
	2750
	2751	END SELECT
[667]	2752
[1]	2753	ENDDO
	2754
	2755
	2756	!
	2757	!-- Append user-defined data output variables to the standard data output
	2758	IF ( data_output_user(1) /= ' ' ) THEN
	2759	i = 1
	2760	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2761	i = i + 1
	2762	ENDDO
	2763	j = 1
	2764	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2765	IF ( i > 100 ) THEN
[215]	2766	message_string = 'number of output quantitities given by data' // &
	2767	'_output and data_output_user exceeds the limit of 100'
[226]	2768	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2769	ENDIF
	2770	data_output(i) = data_output_user(j)
	2771	i = i + 1
	2772	j = j + 1
	2773	ENDDO
	2774	ENDIF
	2775
	2776	!
	2777	!-- Check and set steering parameters for 2d/3d data output and averaging
	2778	i = 1
	2779	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2780	!
	2781	!-- Check for data averaging
	2782	ilen = LEN_TRIM( data_output(i) )
	2783	j = 0 ! no data averaging
	2784	IF ( ilen > 3 ) THEN
	2785	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2786	j = 1 ! data averaging
	2787	data_output(i) = data_output(i)(1:ilen-3)
	2788	ENDIF
	2789	ENDIF
	2790	!
	2791	!-- Check for cross section or volume data
	2792	ilen = LEN_TRIM( data_output(i) )
	2793	k = 0 ! 3d data
	2794	var = data_output(i)(1:ilen)
	2795	IF ( ilen > 3 ) THEN
	2796	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2797	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2798	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2799	k = 1 ! 2d data
	2800	var = data_output(i)(1:ilen-3)
	2801	ENDIF
	2802	ENDIF
	2803	!
	2804	!-- Check for allowed value and set units
	2805	SELECT CASE ( TRIM( var ) )
	2806
	2807	CASE ( 'e' )
	2808	IF ( constant_diffusion ) THEN
[215]	2809	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2810	'res constant_diffusion = .FALSE.'
[226]	2811	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2812	ENDIF
	2813	unit = 'm2/s2'
	2814
[771]	2815	CASE ( 'lpt' )
	2816	IF ( .NOT. cloud_physics ) THEN
	2817	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2818	'res cloud_physics = .TRUE.'
	2819	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2820	ENDIF
	2821	unit = 'K'
	2822
[1053]	2823	CASE ( 'nr' )
	2824	IF ( .NOT. cloud_physics ) THEN
	2825	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2826	'res cloud_physics = .TRUE.'
	2827	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2828	ELSEIF ( icloud_scheme /= 0 ) THEN
	2829	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2830	'res cloud_scheme = seifert_beheng'
	2831	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2832	ENDIF
	2833	unit = '1/m3'
	2834
[1]	2835	CASE ( 'pc', 'pr' )
	2836	IF ( .NOT. particle_advection ) THEN
[215]	2837	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2838	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2839	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2840	ENDIF
	2841	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2842	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2843
[1053]	2844	CASE ( 'prr' )
	2845	IF ( .NOT. cloud_physics ) THEN
	2846	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2847	'res cloud_physics = .TRUE.'
	2848	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2849	ELSEIF ( icloud_scheme /= 0 ) THEN
	2850	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2851	'res cloud_scheme = seifert_beheng'
	2852	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2853	ELSEIF ( .NOT. precipitation ) THEN
	2854	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2855	'res precipitation = .TRUE.'
	2856	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
	2857	ENDIF
	2858	unit = 'kg/kg m/s'
	2859
[1]	2860	CASE ( 'q', 'vpt' )
[75]	2861	IF ( .NOT. humidity ) THEN
[215]	2862	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2863	'res humidity = .TRUE.'
[226]	2864	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2865	ENDIF
	2866	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2867	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2868
[1053]	2869	CASE ( 'qc' )
	2870	IF ( .NOT. cloud_physics ) THEN
	2871	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2872	'res cloud_physics = .TRUE.'
	2873	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2874	ELSEIF ( icloud_scheme /= 0 ) THEN
	2875	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2876	'res cloud_scheme = seifert_beheng'
	2877	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2878	ENDIF
	2879	unit = 'kg/kg'
	2880
[1]	2881	CASE ( 'ql' )
	2882	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2883	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2884	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2885	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2886	ENDIF
	2887	unit = 'kg/kg'
	2888
	2889	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2890	IF ( .NOT. cloud_droplets ) THEN
[215]	2891	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2892	'res cloud_droplets = .TRUE.'
[226]	2893	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2894	ENDIF
	2895	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2896	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2897	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2898
[1053]	2899	CASE ( 'qr' )
	2900	IF ( .NOT. cloud_physics ) THEN
	2901	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2902	'res cloud_physics = .TRUE.'
	2903	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
	2904	ELSEIF ( icloud_scheme /= 0 ) THEN
	2905	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2906	'res cloud_scheme = seifert_beheng'
	2907	CALL message( 'check_parameters', 'PA0359', 1, 2, 0, 6, 0 )
	2908	ENDIF
	2909	unit = 'kg/kg'
	2910
[1]	2911	CASE ( 'qv' )
	2912	IF ( .NOT. cloud_physics ) THEN
[215]	2913	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2914	'res cloud_physics = .TRUE.'
[226]	2915	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2916	ENDIF
	2917	unit = 'kg/kg'
	2918
[96]	2919	CASE ( 'rho' )
	2920	IF ( .NOT. ocean ) THEN
[215]	2921	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2922	'res ocean = .TRUE.'
[226]	2923	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2924	ENDIF
	2925	unit = 'kg/m3'
	2926
[1]	2927	CASE ( 's' )
	2928	IF ( .NOT. passive_scalar ) THEN
[215]	2929	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2930	'res passive_scalar = .TRUE.'
[226]	2931	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2932	ENDIF
	2933	unit = 'conc'
	2934
[96]	2935	CASE ( 'sa' )
	2936	IF ( .NOT. ocean ) THEN
[215]	2937	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2938	'res ocean = .TRUE.'
[226]	2939	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2940	ENDIF
	2941	unit = 'psu'
	2942
[978]	2943	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
[1]	2944	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2945	message_string = 'illegal value for data_output: "' // &
	2946	TRIM( var ) // '" & only 2d-horizontal ' // &
	2947	'cross sections are allowed for this value'
[226]	2948	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2949	ENDIF
	2950	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2951	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2952	'res cloud_physics = .TRUE.'
[226]	2953	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2954	ENDIF
[72]	2955	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2956	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2957	'res precipitation = .TRUE.'
[226]	2958	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2959	ENDIF
	2960	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2961	message_string = 'temporal averaging of precipitation ' // &
	2962	'amount "' // TRIM( var ) // '" is not possible'
[226]	2963	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2964	ENDIF
	2965	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2966	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2967	'res precipitation = .TRUE.'
[226]	2968	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2969	ENDIF
[354]	2970	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2971	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2972	'res humidity = .TRUE.'
	2973	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2974	ENDIF
[72]	2975
[354]	2976	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2977	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2978	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2979	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2980	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2981	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2982	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2983	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[996]	2984	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
[72]	2985
[1]	2986
	2987	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2988	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2989	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2990	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2991	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2992	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2993	CONTINUE
	2994
	2995	CASE DEFAULT
	2996	CALL user_check_data_output( var, unit )
	2997
	2998	IF ( unit == 'illegal' ) THEN
[215]	2999	IF ( data_output_user(1) /= ' ' ) THEN
	3000	message_string = 'illegal value for data_output or ' // &
	3001	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	3002	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	3003	ELSE
	3004	message_string = 'illegal value for data_output =' // &
	3005	TRIM( data_output(i) ) // '"'
[226]	3006	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	3007	ENDIF
	3008	ENDIF
	3009
	3010	END SELECT
	3011	!
	3012	!-- Set the internal steering parameters appropriately
	3013	IF ( k == 0 ) THEN
	3014	do3d_no(j) = do3d_no(j) + 1
	3015	do3d(j,do3d_no(j)) = data_output(i)
	3016	do3d_unit(j,do3d_no(j)) = unit
	3017	ELSE
	3018	do2d_no(j) = do2d_no(j) + 1
	3019	do2d(j,do2d_no(j)) = data_output(i)
	3020	do2d_unit(j,do2d_no(j)) = unit
	3021	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	3022	data_output_xy(j) = .TRUE.
	3023	ENDIF
	3024	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	3025	data_output_xz(j) = .TRUE.
	3026	ENDIF
	3027	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	3028	data_output_yz(j) = .TRUE.
	3029	ENDIF
	3030	ENDIF
	3031
	3032	IF ( j == 1 ) THEN
	3033	!
	3034	!-- Check, if variable is already subject to averaging
	3035	found = .FALSE.
	3036	DO k = 1, doav_n
	3037	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	3038	ENDDO
	3039
	3040	IF ( .NOT. found ) THEN
	3041	doav_n = doav_n + 1
	3042	doav(doav_n) = var
	3043	ENDIF
	3044	ENDIF
	3045
	3046	i = i + 1
	3047	ENDDO
	3048
	3049	!
[376]	3050	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	3051	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	3052	WRITE( message_string, * ) 'output of averaged quantity "', &
	3053	TRIM( doav(1) ), '_av" requires to set a ', &
	3054	'non-zero & averaging interval'
	3055	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	3056	ENDIF
	3057
	3058	!
[308]	3059	!-- Check sectional planes and store them in one shared array
	3060	IF ( ANY( section_xy > nz + 1 ) ) THEN
	3061	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	3062	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	3063	ENDIF
	3064	IF ( ANY( section_xz > ny + 1 ) ) THEN
	3065	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	3066	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	3067	ENDIF
	3068	IF ( ANY( section_yz > nx + 1 ) ) THEN
	3069	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	3070	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	3071	ENDIF
[1]	3072	section(:,1) = section_xy
	3073	section(:,2) = section_xz
	3074	section(:,3) = section_yz
	3075
	3076	!
	3077	!-- Upper plot limit for 2D vertical sections
	3078	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	3079	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	3080	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	3081	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	3082	' (zu(nzt))'
[226]	3083	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	3084	ENDIF
	3085
	3086	!
	3087	!-- Upper plot limit for 3D arrays
	3088	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	3089
	3090	!
	3091	!-- Determine and check accuracy for compressed 3D plot output
	3092	IF ( do3d_compress ) THEN
	3093	!
	3094	!-- Compression only permissible on T3E machines
	3095	IF ( host(1:3) /= 't3e' ) THEN
[215]	3096	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	3097	TRIM( host ) // '"'
[226]	3098	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	3099	ENDIF
	3100
	3101	i = 1
	3102	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	3103
	3104	ilen = LEN_TRIM( do3d_comp_prec(i) )
	3105	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	3106	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	3107	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	3108	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	3109	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	3110	ENDIF
	3111
	3112	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	3113	var = do3d_comp_prec(i)(1:ilen-1)
	3114
	3115	SELECT CASE ( var )
	3116
	3117	CASE ( 'u' )
	3118	j = 1
	3119	CASE ( 'v' )
	3120	j = 2
	3121	CASE ( 'w' )
	3122	j = 3
	3123	CASE ( 'p' )
	3124	j = 4
	3125	CASE ( 'pt' )
	3126	j = 5
	3127
	3128	CASE DEFAULT
[215]	3129	WRITE( message_string, * ) 'unknown variable "', &
	3130	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	3131	i, ')'
[226]	3132	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	3133
	3134	END SELECT
	3135
	3136	plot_3d_precision(j)%precision = prec
	3137	i = i + 1
	3138
	3139	ENDDO
	3140	ENDIF
	3141
	3142	!
	3143	!-- Check the data output format(s)
	3144	IF ( data_output_format(1) == ' ' ) THEN
	3145	!
	3146	!-- Default value
	3147	netcdf_output = .TRUE.
	3148	ELSE
	3149	i = 1
	3150	DO WHILE ( data_output_format(i) /= ' ' )
	3151
	3152	SELECT CASE ( data_output_format(i) )
	3153
	3154	CASE ( 'netcdf' )
	3155	netcdf_output = .TRUE.
	3156	CASE ( 'iso2d' )
	3157	iso2d_output = .TRUE.
	3158	CASE ( 'avs' )
	3159	avs_output = .TRUE.
	3160
	3161	CASE DEFAULT
[215]	3162	message_string = 'unknown value for data_output_format "' // &
	3163	TRIM( data_output_format(i) ) // '"'
[226]	3164	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	3165
	3166	END SELECT
	3167
	3168	i = i + 1
	3169	IF ( i > 10 ) EXIT
	3170
	3171	ENDDO
[1031]	3172	ENDIF
[1]	3173
[1031]	3174	!
	3175	!-- Set output format string (used in header)
	3176	IF ( netcdf_output ) THEN
	3177
	3178	SELECT CASE ( netcdf_data_format )
	3179	CASE ( 1 )
	3180	output_format_netcdf = 'netCDF classic'
	3181	CASE ( 2 )
	3182	output_format_netcdf = 'netCDF 64bit offset'
	3183	CASE ( 3 )
	3184	output_format_netcdf = 'netCDF4/HDF5'
	3185	CASE ( 4 )
	3186	output_format_netcdf = 'netCDF4/HDF5 classic'
	3187	CASE ( 5 )
	3188	output_format_netcdf = 'parallel netCDF4/HDF5'
	3189	CASE ( 6 )
	3190	output_format_netcdf = 'parallel netCDF4/HDF5 classic'
	3191
	3192	END SELECT
	3193
[1]	3194	ENDIF
	3195
	3196	!
[410]	3197	!-- Check mask conditions
[553]	3198	DO mid = 1, max_masks
[567]	3199	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	3200	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	3201	masks = masks + 1
	3202	ENDIF
	3203	ENDDO
	3204
[410]	3205	IF ( masks < 0 .OR. masks > max_masks ) THEN
	3206	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	3207	'<= ', max_masks, ' (=max_masks)'
[564]	3208	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	3209	ENDIF
	3210	IF ( masks > 0 ) THEN
	3211	mask_scale(1) = mask_scale_x
	3212	mask_scale(2) = mask_scale_y
	3213	mask_scale(3) = mask_scale_z
	3214	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	3215	WRITE( message_string, * ) &
	3216	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	3217	'must be > 0.0'
[564]	3218	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	3219	ENDIF
	3220	!
	3221	!-- Generate masks for masked data output
	3222	CALL init_masks
	3223	ENDIF
	3224
	3225	!
[493]	3226	!-- Check the NetCDF data format
[924]	3227	#if ! defined ( __check )
[1034]	3228	IF ( netcdf_data_format > 2 ) THEN
[924]	3229	#if defined( __netcdf4 )
[493]	3230	CONTINUE
	3231	#else
[1031]	3232	message_string = 'netCDF: netCDF4 format requested but no ' // &
[493]	3233	'cpp-directive __netcdf4 given & switch ' // &
	3234	'back to 64-bit offset format'
	3235	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	3236	netcdf_data_format = 2
	3237	#endif
	3238	ENDIF
[1031]	3239	IF ( netcdf_data_format > 4 ) THEN
	3240	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
	3241	CONTINUE
	3242	#else
	3243	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
	3244	'cpp-directive __netcdf4_parallel given & switch ' // &
	3245	'back to netCDF4 non-parallel output'
	3246	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
	3247	netcdf_data_format = netcdf_data_format - 2
[892]	3248	#endif
[1031]	3249	ENDIF
	3250	#endif
[667]	3251
[809]	3252	#if ! defined( __check )
[1031]	3253	!
[1]	3254	!-- Check netcdf precison
	3255	ldum = .FALSE.
	3256	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	3257	#endif
[1]	3258	!
	3259	!-- Check, whether a constant diffusion coefficient shall be used
	3260	IF ( km_constant /= -1.0 ) THEN
	3261	IF ( km_constant < 0.0 ) THEN
[215]	3262	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	3263	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	3264	ELSE
	3265	IF ( prandtl_number < 0.0 ) THEN
[215]	3266	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	3267	' < 0.0'
[226]	3268	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	3269	ENDIF
	3270	constant_diffusion = .TRUE.
	3271
	3272	IF ( prandtl_layer ) THEN
[215]	3273	message_string = 'prandtl_layer is not allowed with fixed ' // &
	3274	'value of km'
[226]	3275	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	3276	ENDIF
	3277	ENDIF
	3278	ENDIF
	3279
	3280	!
[978]	3281	!-- In case of non-cyclic lateral boundaries and a damping layer for the
	3282	!-- potential temperature, check the width of the damping layer
[1]	3283	IF ( bc_lr /= 'cyclic' ) THEN
[996]	3284	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
[978]	3285	message_string = 'pt_damping_width out of range'
[226]	3286	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3287	ENDIF
	3288	ENDIF
	3289
	3290	IF ( bc_ns /= 'cyclic' ) THEN
[996]	3291	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
[978]	3292	message_string = 'pt_damping_width out of range'
[226]	3293	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	3294	ENDIF
	3295	ENDIF
	3296
	3297	!
	3298	!-- Check value range for rif
	3299	IF ( rif_min >= rif_max ) THEN
[215]	3300	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	3301	'than rif_max = ', rif_max
[226]	3302	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	3303	ENDIF
	3304
	3305	!
	3306	!-- Determine upper and lower hight level indices for random perturbations
[97]	3307	IF ( disturbance_level_b == -9999999.9 ) THEN
	3308	IF ( ocean ) THEN
	3309	disturbance_level_b = zu((nzt*2)/3)
	3310	disturbance_level_ind_b = ( nzt * 2 ) / 3
	3311	ELSE
	3312	disturbance_level_b = zu(nzb+3)
	3313	disturbance_level_ind_b = nzb + 3
	3314	ENDIF
[1]	3315	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	3316	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3317	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	3318	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	3319	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	3320	WRITE( message_string, * ) 'disturbance_level_b = ', &
	3321	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3322	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	3323	ELSE
	3324	DO k = 3, nzt-2
	3325	IF ( disturbance_level_b <= zu(k) ) THEN
	3326	disturbance_level_ind_b = k
	3327	EXIT
	3328	ENDIF
	3329	ENDDO
	3330	ENDIF
	3331
[97]	3332	IF ( disturbance_level_t == -9999999.9 ) THEN
	3333	IF ( ocean ) THEN
	3334	disturbance_level_t = zu(nzt-3)
	3335	disturbance_level_ind_t = nzt - 3
	3336	ELSE
	3337	disturbance_level_t = zu(nzt/3)
	3338	disturbance_level_ind_t = nzt / 3
	3339	ENDIF
[1]	3340	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	3341	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3342	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	3343	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	3344	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	3345	WRITE( message_string, * ) 'disturbance_level_t = ', &
	3346	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	3347	disturbance_level_b
[226]	3348	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	3349	ELSE
	3350	DO k = 3, nzt-2
	3351	IF ( disturbance_level_t <= zu(k) ) THEN
	3352	disturbance_level_ind_t = k
	3353	EXIT
	3354	ENDIF
	3355	ENDDO
	3356	ENDIF
	3357
	3358	!
	3359	!-- Check again whether the levels determined this way are ok.
	3360	!-- Error may occur at automatic determination and too few grid points in
	3361	!-- z-direction.
	3362	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3363	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3364	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3365	disturbance_level_b
[226]	3366	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3367	ENDIF
	3368
	3369	!
	3370	!-- Determine the horizontal index range for random perturbations.
	3371	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3372	!-- near the inflow and the perturbation area is further limited to ...(1)
	3373	!-- after the initial phase of the flow.
	3374	dist_nxl = 0; dist_nxr = nx
	3375	dist_nys = 0; dist_nyn = ny
	3376	IF ( bc_lr /= 'cyclic' ) THEN
	3377	IF ( inflow_disturbance_begin == -1 ) THEN
	3378	inflow_disturbance_begin = MIN( 10, nx/2 )
	3379	ENDIF
	3380	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3381	THEN
[215]	3382	message_string = 'inflow_disturbance_begin out of range'
[226]	3383	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3384	ENDIF
	3385	IF ( inflow_disturbance_end == -1 ) THEN
	3386	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3387	ENDIF
	3388	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3389	THEN
[215]	3390	message_string = 'inflow_disturbance_end out of range'
[226]	3391	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3392	ENDIF
	3393	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3394	IF ( inflow_disturbance_begin == -1 ) THEN
	3395	inflow_disturbance_begin = MIN( 10, ny/2 )
	3396	ENDIF
	3397	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3398	THEN
[215]	3399	message_string = 'inflow_disturbance_begin out of range'
[226]	3400	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3401	ENDIF
	3402	IF ( inflow_disturbance_end == -1 ) THEN
	3403	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3404	ENDIF
	3405	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3406	THEN
[215]	3407	message_string = 'inflow_disturbance_end out of range'
[226]	3408	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3409	ENDIF
	3410	ENDIF
	3411
[978]	3412	IF ( bc_lr == 'radiation/dirichlet' .OR. bc_lr == 'neumann/dirichlet' ) THEN
[1]	3413	dist_nxr = nx - inflow_disturbance_begin
	3414	dist_nxl(1) = nx - inflow_disturbance_end
[978]	3415	ELSEIF ( bc_lr == 'dirichlet/radiation' .OR. bc_lr == 'dirichlet/neumann' ) THEN
[1]	3416	dist_nxl = inflow_disturbance_begin
	3417	dist_nxr(1) = inflow_disturbance_end
[73]	3418	ENDIF
[978]	3419	IF ( bc_ns == 'dirichlet/radiation' .OR. bc_ns == 'dirichlet/neumann' ) THEN
[1]	3420	dist_nyn = ny - inflow_disturbance_begin
	3421	dist_nys(1) = ny - inflow_disturbance_end
[978]	3422	ELSEIF ( bc_ns == 'radiation/dirichlet' .OR. bc_ns == 'neumann/dirichlet' ) THEN
[1]	3423	dist_nys = inflow_disturbance_begin
	3424	dist_nyn(1) = inflow_disturbance_end
	3425	ENDIF
	3426
	3427	!
[151]	3428	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3429	!-- boundary (so far, a turbulent inflow is realized from the left side only)
[978]	3430	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' .AND. bc_lr /= 'dirichlet/neumann' ) THEN
[215]	3431	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3432	'condition at the inflow boundary'
[226]	3433	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3434	ENDIF
	3435
	3436	!
[1060]	3437	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
	3438	!-- data from prerun
	3439	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' ) THEN
	3440	message_string = 'turbulent_inflow = .T. requires ' // &
	3441	'initializing_actions = ''cyclic_fill'' '
	3442	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
	3443	ENDIF
	3444
	3445	!
[151]	3446	!-- In case of turbulent inflow calculate the index of the recycling plane
	3447	IF ( turbulent_inflow ) THEN
	3448	IF ( recycling_width == 9999999.9 ) THEN
	3449	!
	3450	!-- Set the default value for the width of the recycling domain
	3451	recycling_width = 0.1 * nx * dx
	3452	ELSE
	3453	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3454	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3455	' ', recycling_width
[226]	3456	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3457	ENDIF
	3458	ENDIF
	3459	!
	3460	!-- Calculate the index
	3461	recycling_plane = recycling_width / dx
	3462	ENDIF
	3463
	3464	!
[1]	3465	!-- Check random generator
	3466	IF ( random_generator /= 'system-specific' .AND. &
	3467	random_generator /= 'numerical-recipes' ) THEN
[215]	3468	message_string = 'unknown random generator: random_generator = "' // &
	3469	TRIM( random_generator ) // '"'
[226]	3470	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3471	ENDIF
	3472
	3473	!
	3474	!-- Determine damping level index for 1D model
	3475	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3476	IF ( damp_level_1d == -1.0 ) THEN
	3477	damp_level_1d = zu(nzt+1)
	3478	damp_level_ind_1d = nzt + 1
	3479	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3480	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3481	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3482	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3483	ELSE
	3484	DO k = 1, nzt+1
	3485	IF ( damp_level_1d <= zu(k) ) THEN
	3486	damp_level_ind_1d = k
	3487	EXIT
	3488	ENDIF
	3489	ENDDO
	3490	ENDIF
	3491	ENDIF
[215]	3492
[1]	3493	!
	3494	!-- Check some other 1d-model parameters
	3495	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3496	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3497	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3498	'" is unknown'
[226]	3499	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3500	ENDIF
	3501	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3502	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3503	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3504	'" is unknown'
[226]	3505	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3506	ENDIF
	3507
	3508	!
	3509	!-- Set time for the next user defined restart (time_restart is the
	3510	!-- internal parameter for steering restart events)
	3511	IF ( restart_time /= 9999999.9 ) THEN
[291]	3512	IF ( restart_time > time_since_reference_point ) THEN
	3513	time_restart = restart_time
	3514	ENDIF
[1]	3515	ELSE
	3516	!
	3517	!-- In case of a restart run, set internal parameter to default (no restart)
	3518	!-- if the NAMELIST-parameter restart_time is omitted
	3519	time_restart = 9999999.9
	3520	ENDIF
	3521
	3522	!
	3523	!-- Set default value of the time needed to terminate a model run
	3524	IF ( termination_time_needed == -1.0 ) THEN
	3525	IF ( host(1:3) == 'ibm' ) THEN
	3526	termination_time_needed = 300.0
	3527	ELSE
	3528	termination_time_needed = 35.0
	3529	ENDIF
	3530	ENDIF
	3531
	3532	!
	3533	!-- Check the time needed to terminate a model run
	3534	IF ( host(1:3) == 't3e' ) THEN
	3535	!
	3536	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3537	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3538	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3539	WRITE( message_string, * ) 'termination_time_needed = ', &
	3540	termination_time_needed, ' must be > 30.0 on host "', &
	3541	TRIM( host ), '"'
[226]	3542	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3543	ENDIF
	3544	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3545	!
	3546	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3547	!-- because the job time consumed before executing palm (for compiling,
	3548	!-- copying of files, etc.) has to be regarded
	3549	IF ( termination_time_needed < 300.0 ) THEN
[215]	3550	WRITE( message_string, * ) 'termination_time_needed = ', &
	3551	termination_time_needed, ' should be >= 300.0 on host "', &
	3552	TRIM( host ), '"'
[226]	3553	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3554	ENDIF
	3555	ENDIF
	3556
[217]	3557	!
[240]	3558	!-- Check pressure gradient conditions
	3559	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3560	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3561	'w are .TRUE. but one of them must be .FALSE.'
[240]	3562	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3563	ENDIF
	3564	IF ( dp_external ) THEN
	3565	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3566	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3567	' of range'
	3568	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3569	ENDIF
	3570	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3571	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3572	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3573	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3574	ENDIF
	3575	ENDIF
	3576	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3577	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3578	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3579	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3580	ENDIF
[241]	3581	IF ( conserve_volume_flow ) THEN
	3582	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3583
	3584	conserve_volume_flow_mode = 'initial_profiles'
	3585
[241]	3586	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3587	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3588	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3589	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3590	conserve_volume_flow_mode
	3591	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3592	ENDIF
[667]	3593	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3594	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3595	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3596	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3597	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3598	ENDIF
	3599	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3600	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3601	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3602	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3603	' or ''bulk_velocity'''
	3604	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3605	ENDIF
	3606	ENDIF
	3607	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3608	( .NOT. conserve_volume_flow .OR. &
	3609	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3610	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3611	'conserve_volume_flow = .T. and ', &
[241]	3612	'conserve_volume_flow_mode = ''bulk_velocity'''
	3613	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3614	ENDIF
[240]	3615
	3616	!
[264]	3617	!-- Check particle attributes
	3618	IF ( particle_color /= 'none' ) THEN
	3619	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3620	particle_color /= 'z' ) THEN
	3621	message_string = 'illegal value for parameter particle_color: ' // &
	3622	TRIM( particle_color)
	3623	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3624	ELSE
	3625	IF ( color_interval(2) <= color_interval(1) ) THEN
	3626	message_string = 'color_interval(2) <= color_interval(1)'
	3627	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3628	ENDIF
	3629	ENDIF
	3630	ENDIF
	3631
	3632	IF ( particle_dvrpsize /= 'none' ) THEN
	3633	IF ( particle_dvrpsize /= 'absw' ) THEN
	3634	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3635	' ' // TRIM( particle_color)
	3636	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3637	ELSE
	3638	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3639	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3640	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3641	ENDIF
	3642	ENDIF
	3643	ENDIF
	3644
	3645	!
[217]	3646	!-- Check &userpar parameters
	3647	CALL user_check_parameters
[1]	3648
[217]	3649
[667]	3650
[1]	3651	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |