Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 1025

Last change on this file since 1025 was 1020, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 127.0 KB

Rev	Line
[1]	1	SUBROUTINE check_parameters
	2
	3	!------------------------------------------------------------------------------!
[484]	4	! Current revisions:
[1]	5	! -----------------
[979]	6	!
[1020]	7	!
[979]	8	! Former revisions:
	9	! -----------------
	10	! $Id: check_parameters.f90 1020 2012-09-28 06:52:37Z letzel $
	11	!
[1020]	12	! 1019 2012-09-28 06:46:45Z raasch
	13	! non-optimized version of prognostic_equations not allowed any more
	14	!
[1017]	15	! 1015 2012-09-27 09:23:24Z raasch
	16	! acc allowed for loop optimization,
	17	! checks for adjustment of mixing length to the Prandtl mixing length removed
	18	!
[1004]	19	! 1003 2012-09-14 14:35:53Z raasch
	20	! checks for cases with unequal subdomain sizes removed
	21	!
[1002]	22	! 1001 2012-09-13 14:08:46Z raasch
	23	! all actions concerning leapfrog- and upstream-spline-scheme removed
	24	!
[997]	25	! 996 2012-09-07 10:41:47Z raasch
	26	! little reformatting
[1001]	27
[979]	28	! 978 2012-08-09 08:28:32Z fricke
[978]	29	! setting of bc_lr/ns_dirneu/neudir
	30	! outflow damping layer removed
	31	! check for z0h*
	32	! check for pt_damping_width
[667]	33	!
[965]	34	! 964 2012-07-26 09:14:24Z raasch
	35	! check of old profil-parameters removed
	36	!
[941]	37	! 940 2012-07-09 14:31:00Z raasch
	38	! checks for parameter neutral
	39	!
[925]	40	! 924 2012-06-06 07:44:41Z maronga
	41	! Bugfix: preprocessor directives caused error during compilation
	42	!
[893]	43	! 892 2012-05-02 13:51:44Z maronga
	44	! Bugfix for parameter file check ( excluding __netcdf4 )
	45	!
[867]	46	! 866 2012-03-28 06:44:41Z raasch
	47	! use only 60% of the geostrophic wind as translation speed in case of Galilean
	48	! transformation and use_ug_for_galilei_tr = .T. in order to mimimize the
	49	! timestep
	50	!
[863]	51	! 861 2012-03-26 14:18:34Z suehring
	52	! Check for topography and ws-scheme removed.
	53	! Check for loop_optimization = 'vector' and ws-scheme removed.
	54	!
[846]	55	! 845 2012-03-07 10:23:05Z maronga
	56	! Bugfix: exclude __netcdf4 directive part from namelist file check compilation
	57	!
[829]	58	! 828 2012-02-21 12:00:36Z raasch
	59	! check of collision_kernel extended
	60	!
[826]	61	! 825 2012-02-19 03:03:44Z raasch
	62	! check for collision_kernel and curvature_solution_effects
	63	!
[810]	64	! 809 2012-01-30 13:32:58Z maronga
	65	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	66	!
[808]	67	! 807 2012-01-25 11:53:51Z maronga
	68	! New cpp directive "__check" implemented which is used by check_namelist_files
	69	!
[775]	70	! 774 2011-10-27 13:34:16Z letzel
	71	! bugfix for prescribed u,v-profiles
	72	!
[768]	73	! 767 2011-10-14 06:39:12Z raasch
	74	! Calculating u,v-profiles from given profiles by linear interpolation.
	75	! bugfix: dirichlet_0 conditions for ug/vg moved from init_3d_model to here
	76	!
[708]	77	! 707 2011-03-29 11:39:40Z raasch
	78	! setting of bc_lr/ns_dirrad/raddir
	79	!
	80	! 689 2011-02-20 19:31:12z gryschka
[690]	81	! Bugfix for some logical expressions
	82	! (syntax was not compatible with all compilers)
[687]	83	!
[690]	84	! 680 2011-02-04 23:16:06Z gryschka
[681]	85	! init_vortex is not allowed with volume_flow_control
[668]	86	!
[674]	87	! 673 2011-01-18 16:19:48Z suehring
	88	! Declaration of ws_scheme_sca and ws_scheme_mom added (moved from advec_ws).
	89	!
[668]	90	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	91	! Exchange of parameters between ocean and atmosphere via PE0
	92	! Check for illegal combination of ws-scheme and timestep scheme.
	93	! Check for topography and ws-scheme.
	94	! Check for not cyclic boundary conditions in combination with ws-scheme and
	95	! loop_optimization = 'vector'.
	96	! Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
	97	! Different processor/grid topology in atmosphere and ocean is now allowed!
	98	! Bugfixes in checking for conserve_volume_flow_mode
[601]	99	! 600 2010-11-24 16:10:51Z raasch
	100	! change due to new default value of surface_waterflux
[581]	101	! 580 2010-10-05 13:59:11Z heinze
[601]	102	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
[581]	103	!
[568]	104	! 567 2010-10-01 10:46:30Z helmke
	105	! calculating masks changed
	106	!
[565]	107	! 564 2010-09-30 13:18:59Z helmke
	108	! palm message identifiers of masked output changed, 20 replaced by max_masks
	109	!
[554]	110	! 553 2010-09-01 14:09:06Z weinreis
	111	! masks is calculated and removed from inipar
[532]	112	!
	113	! 531 2010-04-21 06:47:21Z heinze
	114	! Bugfix: unit of hyp changed to dbar
[392]	115	!
[525]	116	! 524 2010-03-30 02:04:51Z raasch
	117	! Bugfix: "/" in netcdf profile variable names replaced by ":"
	118	!
[494]	119	! 493 2010-03-01 08:30:24Z raasch
	120	! netcdf_data_format is checked
	121	!
[449]	122	! 411 2009-12-11 14:15:58Z heinze
	123	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	124	! Initialization of large scale vertical motion (subsidence/ascent)
	125	!
	126	! 410 2009-12-04 17:05:40Z letzel
	127	! masked data output
	128	!
[392]	129	! 388 2009-09-23 09:40:33Z raasch
[388]	130	! Check profiles fpr prho and hyp.
[376]	131	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
	132	! interval has been set, respective error message is included
[366]	133	! bc_lr_cyc and bc_ns_cyc are set,
[328]	134	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[308]	135	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
[291]	136	! Coupling with independent precursor runs.
[264]	137	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
[232]	138	! Bugfix: pressure included for profile output
[240]	139	! Check pressure gradient conditions
[256]	140	! topography_grid_convention moved from user_check_parameters
	141	! 'single_street_canyon'
[367]	142	! Added shf* and qsws* to the list of available output data
[226]	143	!
	144	! 222 2009-01-12 16:04:16Z letzel
[217]	145	! +user_check_parameters
[213]	146	! Output of messages replaced by message handling routine.
[206]	147	! Implementation of an MPI-1 coupling: replaced myid with target_id,
	148	! deleted __mpi2 directives
[222]	149	! Check that PALM is called with mrun -K parallel for coupling
[198]	150	!
	151	! 197 2008-09-16 15:29:03Z raasch
[177]	152	! Bug fix: Construction of vertical profiles when 10 gradients have been
[181]	153	! specified in the parameter list (ug, vg, pt, q, sa, lad)
	154	!
	155	! Strict grid matching along z is not needed for mg-solver.
[153]	156	! Leaf area density (LAD) explicitly set to its surface value at k=0
[151]	157	! Case of reading data for recycling included in initializing_actions,
[197]	158	! check of turbulent_inflow and calculation of recycling_plane.
	159	! q*2 profile added
[139]	160	!
	161	! 138 2007-11-28 10:03:58Z letzel
[138]	162	! Plant canopy added
[132]	163	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
[116]	164	! Multigrid solver allows topography, checking of dt_sort_particles
[121]	165	! Bugfix: initializing u_init and v_init in case of ocean runs
[110]	166	!
	167	! 109 2007-08-28 15:26:47Z letzel
[102]	168	! Check coupling_mode and set default (obligatory) values (like boundary
[106]	169	! conditions for temperature and fluxes) in case of coupled runs.
	170	! +profiles for wp and w"e
[104]	171	! Bugfix: Error message concerning output of particle concentration (pc)
	172	! modified
[108]	173	! More checks and more default values for coupled runs
	174	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
	175	! cloud_physics = .T.)
	176	! Rayleigh damping for ocean fixed.
[109]	177	! Check and, if necessary, set default value for dt_coupling
[98]	178	!
	179	! 97 2007-06-21 08:23:15Z raasch
[97]	180	! Initial salinity profile is calculated, salinity boundary conditions are
	181	! checked,
[94]	182	! z_max_do1d is checked only in case of ocean = .f.,
[97]	183	! +initial temperature and geostrophic velocity profiles for the ocean version,
	184	! use_pt_reference renamed use_reference
[77]	185	!
[90]	186	! 89 2007-05-25 12:08:31Z raasch
	187	! Check for user-defined profiles
	188	!
[77]	189	! 75 2007-03-22 09:54:05Z raasch
[51]	190	! "by_user" allowed as initializing action, -data_output_ts,
[63]	191	! leapfrog with non-flat topography not allowed any more, loop_optimization
[75]	192	! and pt_reference are checked, moisture renamed humidity,
[72]	193	! output of precipitation amount/rate and roughnes length + check
[73]	194	! possible negative humidities are avoided in initial profile,
[75]	195	! dirichlet/neumann changed to dirichlet/radiation, etc.,
	196	! revision added to run_description_header
[1]	197	!
[39]	198	! 20 2007-02-26 00:12:32Z raasch
	199	! Temperature and humidity gradients at top are now calculated for nzt+1,
	200	! top_heatflux and respective boundary condition bc_pt_t is checked
	201	!
[3]	202	! RCS Log replace by Id keyword, revision history cleaned up
	203	!
[1]	204	! Revision 1.61 2006/08/04 14:20:25 raasch
	205	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
	206	! use_upstream_for_tke, default value for dt_dopts,
	207	! generation of file header moved from routines palm and header to here
	208	!
	209	! Revision 1.1 1997/08/26 06:29:23 raasch
	210	! Initial revision
	211	!
	212	!
	213	! Description:
	214	! ------------
	215	! Check control parameters and deduce further quantities.
	216	!------------------------------------------------------------------------------!
	217
	218	USE arrays_3d
[824]	219	USE cloud_parameters
[1]	220	USE constants
	221	USE control_parameters
[264]	222	USE dvrp_variables
[1]	223	USE grid_variables
	224	USE indices
	225	USE model_1d
	226	USE netcdf_control
	227	USE particle_attributes
	228	USE pegrid
	229	USE profil_parameter
[411]	230	USE subsidence_mod
[1]	231	USE statistics
	232	USE transpose_indices
	233
	234	IMPLICIT NONE
	235
	236	CHARACTER (LEN=1) :: sq
	237	CHARACTER (LEN=6) :: var
	238	CHARACTER (LEN=7) :: unit
	239	CHARACTER (LEN=8) :: date
	240	CHARACTER (LEN=10) :: time
[102]	241	CHARACTER (LEN=40) :: coupling_string
[1]	242	CHARACTER (LEN=100) :: action
	243
[767]	244	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, kk, nnxh, nnyh, &
	245	position, prec
[1]	246	LOGICAL :: found, ldum
[291]	247	REAL :: gradient, maxn, maxp, remote = 0.0, &
	248	simulation_time_since_reference
[1]	249
	250	!
	251	!-- Warning, if host is not set
	252	IF ( host(1:1) == ' ' ) THEN
[213]	253	message_string = '"host" is not set. Please check that environment ' // &
	254	'variable "localhost" & is set before running PALM'
[226]	255	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
[1]	256	ENDIF
	257
	258	!
[102]	259	!-- Check the coupling mode
	260	IF ( coupling_mode /= 'uncoupled' .AND. &
	261	coupling_mode /= 'atmosphere_to_ocean' .AND. &
	262	coupling_mode /= 'ocean_to_atmosphere' ) THEN
[213]	263	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
[226]	264	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
[102]	265	ENDIF
	266
	267	!
[108]	268	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
[667]	269	IF ( coupling_mode /= 'uncoupled') THEN
[213]	270
[108]	271	IF ( dt_coupling == 9999999.9 ) THEN
[213]	272	message_string = 'dt_coupling is not set but required for coup' // &
	273	'ling mode "' // TRIM( coupling_mode ) // '"'
[226]	274	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
[108]	275	ENDIF
[213]	276
[206]	277	#if defined( __parallel )
[807]	278
	279	!
	280	!-- NOTE: coupled runs have not been implemented in the check_namelist_files
	281	!-- program.
	282	!-- check_namelist_files will need the following information of the other
	283	!-- model (atmosphere/ocean).
[845]	284	! dt_coupling = remote
	285	! dt_max = remote
	286	! restart_time = remote
	287	! dt_restart= remote
	288	! simulation_time_since_reference = remote
	289	! dx = remote
[807]	290
	291
[809]	292	#if ! defined( __check )
[667]	293	IF ( myid == 0 ) THEN
	294	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
	295	ierr )
	296	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
	297	status, ierr )
	298	ENDIF
	299	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	300	#endif
[108]	301	IF ( dt_coupling /= remote ) THEN
[213]	302	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	303	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
	304	'dt_coupling_remote = ', remote
[226]	305	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
[108]	306	ENDIF
[109]	307	IF ( dt_coupling <= 0.0 ) THEN
[809]	308	#if ! defined( __check )
[667]	309	IF ( myid == 0 ) THEN
	310	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
	311	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
	312	status, ierr )
	313	ENDIF
	314	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	315	#endif
[109]	316	dt_coupling = MAX( dt_max, remote )
[213]	317	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	318	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
	319	'MAX(dt_max(A,O)) = ', dt_coupling
[226]	320	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
[109]	321	ENDIF
[809]	322	#if ! defined( __check )
[667]	323	IF ( myid == 0 ) THEN
	324	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
	325	ierr )
	326	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
	327	status, ierr )
	328	ENDIF
	329	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	330	#endif
[108]	331	IF ( restart_time /= remote ) THEN
[213]	332	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	333	'": restart_time = ', restart_time, '& is not equal to ', &
	334	'restart_time_remote = ', remote
[226]	335	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
[108]	336	ENDIF
[809]	337	#if ! defined( __check )
[667]	338	IF ( myid == 0 ) THEN
	339	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
	340	ierr )
	341	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
	342	status, ierr )
	343	ENDIF
	344	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	345	#endif
[108]	346	IF ( dt_restart /= remote ) THEN
[213]	347	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
	348	'": dt_restart = ', dt_restart, '& is not equal to ', &
	349	'dt_restart_remote = ', remote
[226]	350	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
[108]	351	ENDIF
[213]	352
[291]	353	simulation_time_since_reference = end_time - coupling_start_time
[809]	354	#if ! defined( __check )
[667]	355	IF ( myid == 0 ) THEN
	356	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
	357	14, comm_inter, ierr )
	358	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
	359	status, ierr )
	360	ENDIF
	361	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	362	#endif
[291]	363	IF ( simulation_time_since_reference /= remote ) THEN
[213]	364	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
[291]	365	'": simulation_time_since_reference = ', &
	366	simulation_time_since_reference, '& is not equal to ', &
	367	'simulation_time_since_reference_remote = ', remote
[226]	368	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
[108]	369	ENDIF
[213]	370
[809]	371	#if ! defined( __check )
[667]	372	IF ( myid == 0 ) THEN
	373	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
	374	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
	375	status, ierr )
[108]	376	ENDIF
[667]	377	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[213]	378
[807]	379	#endif
[667]	380	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	381
	382	IF ( dx < remote ) THEN
	383	WRITE( message_string, * ) 'coupling mode "', &
	384	TRIM( coupling_mode ), &
	385	'": dx in Atmosphere is not equal to or not larger then dx in ocean'
	386	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
	387	ENDIF
	388
	389	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
	390	WRITE( message_string, * ) 'coupling mode "', &
	391	TRIM( coupling_mode ), &
	392	'": Domain size in x-direction is not equal in ocean and atmosphere'
	393	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
	394	ENDIF
	395
[108]	396	ENDIF
[213]	397
[809]	398	#if ! defined( __check )
[667]	399	IF ( myid == 0) THEN
	400	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
	401	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
	402	status, ierr )
[108]	403	ENDIF
[667]	404	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
[807]	405	#endif
[667]	406	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
	407
	408	IF ( dy < remote ) THEN
	409	WRITE( message_string, * ) 'coupling mode "', &
	410	TRIM( coupling_mode ), &
	411	'": dy in Atmosphere is not equal to or not larger then dy in ocean'
	412	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
	413	ENDIF
	414
	415	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
	416	WRITE( message_string, * ) 'coupling mode "', &
	417	TRIM( coupling_mode ), &
	418	'": Domain size in y-direction is not equal in ocean and atmosphere'
	419	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
	420	ENDIF
	421
	422	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
	423	WRITE( message_string, * ) 'coupling mode "', &
	424	TRIM( coupling_mode ), &
	425	'": nx+1 in ocean is not divisible without remainder with nx+1 in', &
	426	' atmosphere'
	427	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
	428	ENDIF
	429
	430	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
	431	WRITE( message_string, * ) 'coupling mode "', &
	432	TRIM( coupling_mode ), &
	433	'": ny+1 in ocean is not divisible without remainder with ny+1 in', &
	434	' atmosphere'
	435	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
	436	ENDIF
	437
[108]	438	ENDIF
[222]	439	#else
	440	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
	441	' ''mrun -K parallel'''
[226]	442	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
[108]	443	#endif
	444	ENDIF
	445
[809]	446	#if defined( __parallel ) && ! defined ( __check )
[108]	447	!
	448	!-- Exchange via intercommunicator
[667]	449	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
[206]	450	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
	451	ierr )
[667]	452	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
[206]	453	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
	454	comm_inter, status, ierr )
[108]	455	ENDIF
[667]	456	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
	457
[108]	458	#endif
	459
	460
	461	!
[1]	462	!-- Generate the file header which is used as a header for most of PALM's
	463	!-- output files
	464	CALL DATE_AND_TIME( date, time )
	465	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
	466	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
[102]	467	IF ( coupling_mode == 'uncoupled' ) THEN
	468	coupling_string = ''
	469	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	470	coupling_string = ' coupled (atmosphere)'
	471	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	472	coupling_string = ' coupled (ocean)'
	473	ENDIF
[1]	474
[102]	475	WRITE ( run_description_header, &
	476	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
	477	TRIM( version ), TRIM( revision ), 'run: ', &
	478	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
	479	'host: ', TRIM( host ), run_date, run_time
[1]	480
	481	!
[63]	482	!-- Check the general loop optimization method
	483	IF ( loop_optimization == 'default' ) THEN
	484	IF ( host(1:3) == 'nec' ) THEN
	485	loop_optimization = 'vector'
	486	ELSE
	487	loop_optimization = 'cache'
	488	ENDIF
	489	ENDIF
	490
[1015]	491	SELECT CASE ( TRIM( loop_optimization ) )
	492
[1019]	493	CASE ( 'acc', 'cache', 'vector' )
[1015]	494	CONTINUE
	495
	496	CASE DEFAULT
	497	message_string = 'illegal value given for loop_optimization: "' // &
	498	TRIM( loop_optimization ) // '"'
	499	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
	500
	501	END SELECT
	502
[63]	503	!
[1]	504	!-- Check topography setting (check for illegal parameter combinations)
	505	IF ( topography /= 'flat' ) THEN
	506	action = ' '
[861]	507	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme') THEN
[1]	508	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
	509	ENDIF
[861]	510	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	511	THEN
[1]	512	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
	513	ENDIF
[114]	514	IF ( psolver == 'sor' ) THEN
[1]	515	WRITE( action, '(A,A)' ) 'psolver = ', psolver
	516	ENDIF
	517	IF ( sloping_surface ) THEN
	518	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
	519	ENDIF
	520	IF ( galilei_transformation ) THEN
	521	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
	522	ENDIF
	523	IF ( cloud_physics ) THEN
	524	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
	525	ENDIF
	526	IF ( cloud_droplets ) THEN
	527	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
	528	ENDIF
	529	IF ( .NOT. prandtl_layer ) THEN
	530	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
	531	ENDIF
	532	IF ( action /= ' ' ) THEN
[213]	533	message_string = 'a non-flat topography does not allow ' // &
	534	TRIM( action )
[226]	535	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
[1]	536	ENDIF
[256]	537	!
	538	!-- In case of non-flat topography, check whether the convention how to
	539	!-- define the topography grid has been set correctly, or whether the default
	540	!-- is applicable. If this is not possible, abort.
	541	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	542	IF ( TRIM( topography ) /= 'single_building' .AND. &
	543	TRIM( topography ) /= 'single_street_canyon' .AND. &
	544	TRIM( topography ) /= 'read_from_file' ) THEN
	545	!-- The default value is not applicable here, because it is only valid
	546	!-- for the two standard cases 'single_building' and 'read_from_file'
	547	!-- defined in init_grid.
	548	WRITE( message_string, * ) &
	549	'The value for "topography_grid_convention" ', &
	550	'is not set. Its default value is & only valid for ', &
	551	'"topography" = ''single_building'', ', &
	552	'''single_street_canyon'' & or ''read_from_file''.', &
	553	' & Choose ''cell_edge'' or ''cell_center''.'
	554	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
	555	ELSE
	556	!-- The default value is applicable here.
	557	!-- Set convention according to topography.
	558	IF ( TRIM( topography ) == 'single_building' .OR. &
	559	TRIM( topography ) == 'single_street_canyon' ) THEN
	560	topography_grid_convention = 'cell_edge'
	561	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	562	topography_grid_convention = 'cell_center'
	563	ENDIF
	564	ENDIF
	565	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
	566	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
	567	WRITE( message_string, * ) &
	568	'The value for "topography_grid_convention" is ', &
	569	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
	570	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
	571	ENDIF
	572
[1]	573	ENDIF
[94]	574
[1]	575	!
[94]	576	!-- Check ocean setting
	577	IF ( ocean ) THEN
[332]	578
[94]	579	action = ' '
	580	IF ( action /= ' ' ) THEN
[213]	581	message_string = 'ocean = .T. does not allow ' // TRIM( action )
[226]	582	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
[94]	583	ENDIF
	584
[332]	585	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
	586	TRIM( coupling_char ) == '_O' ) THEN
[343]	587
[94]	588	!
[332]	589	!-- Check whether an (uncoupled) atmospheric run has been declared as an
	590	!-- ocean run (this setting is done via mrun-option -y)
[343]	591
[291]	592	message_string = 'ocean = .F. does not allow coupling_char = "' // &
	593	TRIM( coupling_char ) // '" set by mrun-option "-y"'
	594	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
[332]	595
[291]	596	ENDIF
	597
	598	!
[1]	599	!-- Check whether there are any illegal values
	600	!-- Pressure solver:
	601	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
	602	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
[213]	603	message_string = 'unknown solver for perturbation pressure: psolver' // &
	604	' = "' // TRIM( psolver ) // '"'
[226]	605	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
[1]	606	ENDIF
	607
	608	#if defined( __parallel )
	609	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
[213]	610	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
	611	'for a 1d domain-decomposition along x & please do' // &
	612	' not set npey/=1 in the parameter file'
[226]	613	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
[1]	614	ENDIF
	615	#else
	616	IF ( psolver == 'poisfft_hybrid' ) THEN
[213]	617	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
	618	' for a parallel environment'
[226]	619	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
[1]	620	ENDIF
	621	#endif
	622
	623	IF ( psolver == 'multigrid' ) THEN
	624	IF ( cycle_mg == 'w' ) THEN
	625	gamma_mg = 2
	626	ELSEIF ( cycle_mg == 'v' ) THEN
	627	gamma_mg = 1
	628	ELSE
[213]	629	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
	630	TRIM( cycle_mg ) // '"'
[226]	631	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
[1]	632	ENDIF
	633	ENDIF
	634
	635	IF ( fft_method /= 'singleton-algorithm' .AND. &
	636	fft_method /= 'temperton-algorithm' .AND. &
	637	fft_method /= 'system-specific' ) THEN
[213]	638	message_string = 'unknown fft-algorithm: fft_method = "' // &
	639	TRIM( fft_method ) // '"'
[226]	640	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
[1]	641	ENDIF
[667]	642
	643	IF( momentum_advec == 'ws-scheme' .AND. &
[688]	644	.NOT. call_psolver_at_all_substeps ) THEN
[667]	645	message_string = 'psolver must be called at each RK3 substep when "'//&
	646	TRIM(momentum_advec) // ' "is used for momentum_advec'
[685]	647	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
[667]	648	END IF
[1]	649	!
	650	!-- Advection schemes:
[1001]	651	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' ) &
	652	THEN
[214]	653	message_string = 'unknown advection scheme: momentum_advec = "' // &
	654	TRIM( momentum_advec ) // '"'
[226]	655	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
[1]	656	ENDIF
[1001]	657	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
	658	.AND. ( timestep_scheme == 'euler' .OR. &
	659	timestep_scheme == 'runge-kutta-2' ) ) &
	660	THEN
[667]	661	message_string = 'momentum_advec or scalar_advec = "' &
	662	// TRIM( momentum_advec ) // '" is not allowed with timestep_scheme = "' // &
	663	TRIM( timestep_scheme ) // '"'
[226]	664	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
[1]	665	ENDIF
[667]	666	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
[1001]	667	scalar_advec /= 'bc-scheme' ) &
	668	THEN
[214]	669	message_string = 'unknown advection scheme: scalar_advec = "' // &
	670	TRIM( scalar_advec ) // '"'
[226]	671	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
[1]	672	ENDIF
[1019]	673	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
	674	THEN
	675	message_string = 'advection_scheme scalar_advec = "' &
	676	// TRIM( scalar_advec ) // '" not implemented for & loop_optimization = "' // &
	677	TRIM( loop_optimization ) // '"'
	678	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
	679	ENDIF
[1]	680
	681	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
	682	use_upstream_for_tke = .TRUE.
[214]	683	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
	684	'use_sgs_for_particles = .TRUE.'
[226]	685	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
[1]	686	ENDIF
	687
[824]	688	IF ( use_sgs_for_particles .AND. curvature_solution_effects ) THEN
	689	message_string = 'use_sgs_for_particles = .TRUE. not allowed with ' // &
	690	'curvature_solution_effects = .TRUE.'
	691	CALL message( 'check_parameters', 'PA0349', 1, 2, 0, 6, 0 )
	692	ENDIF
	693
[1]	694	!
[1019]	695	!-- Set LOGICAL switches to enhance performance
	696	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
	697	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
	698
	699	!
[1]	700	!-- Timestep schemes:
	701	SELECT CASE ( TRIM( timestep_scheme ) )
	702
	703	CASE ( 'euler' )
	704	intermediate_timestep_count_max = 1
	705
	706	CASE ( 'runge-kutta-2' )
	707	intermediate_timestep_count_max = 2
	708
	709	CASE ( 'runge-kutta-3' )
	710	intermediate_timestep_count_max = 3
	711
	712	CASE DEFAULT
[214]	713	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
	714	TRIM( timestep_scheme ) // '"'
[226]	715	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
[1]	716
	717	END SELECT
	718
[667]	719	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
	720	.AND. timestep_scheme(1:5) == 'runge' ) THEN
[214]	721	message_string = 'momentum advection scheme "' // &
	722	TRIM( momentum_advec ) // '" & does not work with ' // &
	723	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
[226]	724	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
[1]	725	ENDIF
	726
[825]	727	!
	728	!-- Collision kernels:
	729	SELECT CASE ( TRIM( collision_kernel ) )
	730
[828]	731	CASE ( 'hall', 'hall_fast' )
[825]	732	hall_kernel = .TRUE.
	733
	734	CASE ( 'palm' )
	735	palm_kernel = .TRUE.
	736
[828]	737	CASE ( 'wang', 'wang_fast' )
[825]	738	wang_kernel = .TRUE.
	739
	740	CASE ( 'none' )
	741
	742
	743	CASE DEFAULT
	744	message_string = 'unknown collision kernel: collision_kernel = "' // &
	745	TRIM( collision_kernel ) // '"'
	746	CALL message( 'check_parameters', 'PA0350', 1, 2, 0, 6, 0 )
	747
	748	END SELECT
[828]	749	IF ( collision_kernel(6:9) == 'fast' ) use_kernel_tables = .TRUE.
[825]	750
[147]	751	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	752	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	753	!
[214]	754	!-- No restart run: several initialising actions are possible
[1]	755	action = initializing_actions
	756	DO WHILE ( TRIM( action ) /= '' )
	757	position = INDEX( action, ' ' )
	758	SELECT CASE ( action(1:position-1) )
	759
	760	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
[46]	761	'by_user', 'initialize_vortex', 'initialize_ptanom' )
[1]	762	action = action(position+1:)
	763
	764	CASE DEFAULT
[214]	765	message_string = 'initializing_action = "' // &
	766	TRIM( action ) // '" unkown or not allowed'
[226]	767	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
[1]	768
	769	END SELECT
	770	ENDDO
	771	ENDIF
[214]	772
[680]	773	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
	774	conserve_volume_flow ) THEN
	775	message_string = 'initializing_actions = "initialize_vortex"' // &
	776	' ist not allowed with conserve_volume_flow = .T.'
	777	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
	778	ENDIF
	779
	780
[1]	781	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	782	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	783	message_string = 'initializing_actions = "set_constant_profiles"' // &
	784	' and "set_1d-model_profiles" are not allowed ' // &
	785	'simultaneously'
[226]	786	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
[1]	787	ENDIF
[214]	788
[46]	789	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
	790	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
[214]	791	message_string = 'initializing_actions = "set_constant_profiles"' // &
	792	' and "by_user" are not allowed simultaneously'
[226]	793	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
[46]	794	ENDIF
[214]	795
[46]	796	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
	797	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[214]	798	message_string = 'initializing_actions = "by_user" and ' // &
	799	'"set_1d-model_profiles" are not allowed simultaneously'
[226]	800	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
[46]	801	ENDIF
[1]	802
[75]	803	IF ( cloud_physics .AND. .NOT. humidity ) THEN
[214]	804	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
	805	'not allowed with humidity = ', humidity
[226]	806	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
[1]	807	ENDIF
	808
[72]	809	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
[214]	810	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
	811	'not allowed with cloud_physics = ', cloud_physics
[226]	812	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
[72]	813	ENDIF
	814
[75]	815	IF ( humidity .AND. sloping_surface ) THEN
[214]	816	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
	817	'are not allowed simultaneously'
[226]	818	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
[1]	819	ENDIF
	820
[75]	821	IF ( passive_scalar .AND. humidity ) THEN
[214]	822	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
	823	'is not allowed simultaneously'
[226]	824	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
[1]	825	ENDIF
	826
[138]	827	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
[214]	828	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
	829	'coefficient & given value is drag_coefficient = 0.0'
[226]	830	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
[138]	831	ENDIF
	832
[1]	833	!
	834	!-- In case of no model continuation run, check initialising parameters and
	835	!-- deduce further quantities
	836	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	837
	838	!
[767]	839	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
[1]	840	pt_init = pt_surface
[94]	841	IF ( humidity ) q_init = q_surface
	842	IF ( ocean ) sa_init = sa_surface
	843	IF ( passive_scalar ) q_init = s_surface
[138]	844	IF ( plant_canopy ) lad = 0.0
[1]	845
	846	!
	847	!--
	848	!-- If required, compute initial profile of the geostrophic wind
	849	!-- (component ug)
	850	i = 1
	851	gradient = 0.0
[97]	852
	853	IF ( .NOT. ocean ) THEN
	854
	855	ug_vertical_gradient_level_ind(1) = 0
	856	ug(0) = ug_surface
	857	DO k = 1, nzt+1
[177]	858	IF ( i < 11 ) THEN
	859	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
	860	ug_vertical_gradient_level(i) >= 0.0 ) THEN
	861	gradient = ug_vertical_gradient(i) / 100.0
	862	ug_vertical_gradient_level_ind(i) = k - 1
	863	i = i + 1
[1]	864	ENDIF
[177]	865	ENDIF
[97]	866	IF ( gradient /= 0.0 ) THEN
	867	IF ( k /= 1 ) THEN
	868	ug(k) = ug(k-1) + dzu(k) * gradient
	869	ELSE
	870	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
	871	ENDIF
[1]	872	ELSE
[97]	873	ug(k) = ug(k-1)
[1]	874	ENDIF
[97]	875	ENDDO
[1]	876
[97]	877	ELSE
	878
	879	ug_vertical_gradient_level_ind(1) = nzt+1
[121]	880	ug(nzt+1) = ug_surface
[667]	881	DO k = nzt, nzb, -1
[177]	882	IF ( i < 11 ) THEN
	883	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
	884	ug_vertical_gradient_level(i) <= 0.0 ) THEN
	885	gradient = ug_vertical_gradient(i) / 100.0
	886	ug_vertical_gradient_level_ind(i) = k + 1
	887	i = i + 1
[97]	888	ENDIF
	889	ENDIF
	890	IF ( gradient /= 0.0 ) THEN
	891	IF ( k /= nzt ) THEN
	892	ug(k) = ug(k+1) - dzu(k+1) * gradient
	893	ELSE
	894	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
	895	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
	896	ENDIF
	897	ELSE
	898	ug(k) = ug(k+1)
	899	ENDIF
	900	ENDDO
	901
	902	ENDIF
	903
[1]	904	!
[767]	905	!-- In case of no given gradients for ug, choose a zero gradient
[97]	906	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	907	ug_vertical_gradient_level(1) = 0.0
	908	ENDIF
	909
	910	!
	911	!--
	912	!-- If required, compute initial profile of the geostrophic wind
	913	!-- (component vg)
	914	i = 1
	915	gradient = 0.0
[97]	916
	917	IF ( .NOT. ocean ) THEN
	918
	919	vg_vertical_gradient_level_ind(1) = 0
	920	vg(0) = vg_surface
	921	DO k = 1, nzt+1
[177]	922	IF ( i < 11 ) THEN
	923	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
	924	vg_vertical_gradient_level(i) >= 0.0 ) THEN
	925	gradient = vg_vertical_gradient(i) / 100.0
	926	vg_vertical_gradient_level_ind(i) = k - 1
	927	i = i + 1
[1]	928	ENDIF
	929	ENDIF
[97]	930	IF ( gradient /= 0.0 ) THEN
	931	IF ( k /= 1 ) THEN
	932	vg(k) = vg(k-1) + dzu(k) * gradient
	933	ELSE
	934	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
	935	ENDIF
[1]	936	ELSE
[97]	937	vg(k) = vg(k-1)
[1]	938	ENDIF
[97]	939	ENDDO
[1]	940
[97]	941	ELSE
	942
[121]	943	vg_vertical_gradient_level_ind(1) = nzt+1
	944	vg(nzt+1) = vg_surface
[667]	945	DO k = nzt, nzb, -1
[177]	946	IF ( i < 11 ) THEN
	947	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
	948	vg_vertical_gradient_level(i) <= 0.0 ) THEN
	949	gradient = vg_vertical_gradient(i) / 100.0
	950	vg_vertical_gradient_level_ind(i) = k + 1
	951	i = i + 1
[97]	952	ENDIF
	953	ENDIF
	954	IF ( gradient /= 0.0 ) THEN
	955	IF ( k /= nzt ) THEN
	956	vg(k) = vg(k+1) - dzu(k+1) * gradient
	957	ELSE
	958	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
	959	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
	960	ENDIF
	961	ELSE
	962	vg(k) = vg(k+1)
	963	ENDIF
	964	ENDDO
	965
	966	ENDIF
	967
[1]	968	!
[767]	969	!-- In case of no given gradients for vg, choose a zero gradient
[97]	970	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	971	vg_vertical_gradient_level(1) = 0.0
	972	ENDIF
	973
	974	!
[767]	975	!-- Let the initial wind profiles be the calculated ug/vg profiles or
	976	!-- interpolate them from wind profile data (if given)
	977	IF ( u_profile(1) == 9999999.9 .AND. v_profile(1) == 9999999.9 ) THEN
	978
	979	u_init = ug
	980	v_init = vg
	981
	982	ELSEIF ( u_profile(1) == 0.0 .AND. v_profile(1) == 0.0 ) THEN
	983
	984	IF ( uv_heights(1) /= 0.0 ) THEN
	985	message_string = 'uv_heights(1) must be 0.0'
	986	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
	987	ENDIF
	988
	989	use_prescribed_profile_data = .TRUE.
	990
	991	kk = 1
	992	u_init(0) = 0.0
	993	v_init(0) = 0.0
	994
	995	DO k = 1, nz+1
	996
	997	IF ( kk < 100 ) THEN
	998	DO WHILE ( uv_heights(kk+1) <= zu(k) )
	999	kk = kk + 1
	1000	IF ( kk == 100 ) EXIT
	1001	ENDDO
	1002	ENDIF
	1003
[774]	1004	IF ( kk < 100 .AND. uv_heights(kk+1) /= 9999999.9 ) THEN
[767]	1005	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1006	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1007	( u_profile(kk+1) - u_profile(kk) )
	1008	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
	1009	( uv_heights(kk+1) - uv_heights(kk) ) * &
	1010	( v_profile(kk+1) - v_profile(kk) )
	1011	ELSE
	1012	u_init(k) = u_profile(kk)
	1013	v_init(k) = v_profile(kk)
	1014	ENDIF
	1015
	1016	ENDDO
	1017
	1018	ELSE
	1019
	1020	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
	1021	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
	1022
	1023	ENDIF
	1024
	1025	!
[94]	1026	!-- Compute initial temperature profile using the given temperature gradients
[940]	1027	IF ( .NOT. neutral ) THEN
[94]	1028
[940]	1029	i = 1
	1030	gradient = 0.0
[94]	1031
[940]	1032	IF ( .NOT. ocean ) THEN
	1033
	1034	pt_vertical_gradient_level_ind(1) = 0
	1035	DO k = 1, nzt+1
	1036	IF ( i < 11 ) THEN
	1037	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
	1038	pt_vertical_gradient_level(i) >= 0.0 ) THEN
	1039	gradient = pt_vertical_gradient(i) / 100.0
	1040	pt_vertical_gradient_level_ind(i) = k - 1
	1041	i = i + 1
	1042	ENDIF
[1]	1043	ENDIF
[940]	1044	IF ( gradient /= 0.0 ) THEN
	1045	IF ( k /= 1 ) THEN
	1046	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
	1047	ELSE
	1048	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
	1049	ENDIF
[94]	1050	ELSE
[940]	1051	pt_init(k) = pt_init(k-1)
[94]	1052	ENDIF
[940]	1053	ENDDO
[1]	1054
[940]	1055	ELSE
[94]	1056
[940]	1057	pt_vertical_gradient_level_ind(1) = nzt+1
	1058	DO k = nzt, 0, -1
	1059	IF ( i < 11 ) THEN
	1060	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
	1061	pt_vertical_gradient_level(i) <= 0.0 ) THEN
	1062	gradient = pt_vertical_gradient(i) / 100.0
	1063	pt_vertical_gradient_level_ind(i) = k + 1
	1064	i = i + 1
	1065	ENDIF
[94]	1066	ENDIF
[940]	1067	IF ( gradient /= 0.0 ) THEN
	1068	IF ( k /= nzt ) THEN
	1069	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
	1070	ELSE
	1071	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
	1072	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
	1073	ENDIF
[94]	1074	ELSE
[940]	1075	pt_init(k) = pt_init(k+1)
[94]	1076	ENDIF
[940]	1077	ENDDO
[94]	1078
[940]	1079	ENDIF
	1080
[94]	1081	ENDIF
	1082
[1]	1083	!
	1084	!-- In case of no given temperature gradients, choose gradient of neutral
	1085	!-- stratification
[94]	1086	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
[1]	1087	pt_vertical_gradient_level(1) = 0.0
	1088	ENDIF
	1089
	1090	!
[94]	1091	!-- Store temperature gradient at the top boundary for possible Neumann
[1]	1092	!-- boundary condition
[19]	1093	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
[1]	1094
	1095	!
	1096	!-- If required, compute initial humidity or scalar profile using the given
	1097	!-- humidity/scalar gradient. In case of scalar transport, initially store
	1098	!-- values of the scalar parameters on humidity parameters
	1099	IF ( passive_scalar ) THEN
	1100	bc_q_b = bc_s_b
	1101	bc_q_t = bc_s_t
	1102	q_surface = s_surface
	1103	q_surface_initial_change = s_surface_initial_change
	1104	q_vertical_gradient = s_vertical_gradient
	1105	q_vertical_gradient_level = s_vertical_gradient_level
	1106	surface_waterflux = surface_scalarflux
[407]	1107	wall_humidityflux = wall_scalarflux
[1]	1108	ENDIF
	1109
[75]	1110	IF ( humidity .OR. passive_scalar ) THEN
[1]	1111
	1112	i = 1
	1113	gradient = 0.0
	1114	q_vertical_gradient_level_ind(1) = 0
	1115	DO k = 1, nzt+1
[177]	1116	IF ( i < 11 ) THEN
	1117	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
	1118	q_vertical_gradient_level(i) >= 0.0 ) THEN
	1119	gradient = q_vertical_gradient(i) / 100.0
	1120	q_vertical_gradient_level_ind(i) = k - 1
	1121	i = i + 1
[1]	1122	ENDIF
	1123	ENDIF
	1124	IF ( gradient /= 0.0 ) THEN
	1125	IF ( k /= 1 ) THEN
	1126	q_init(k) = q_init(k-1) + dzu(k) * gradient
	1127	ELSE
	1128	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
	1129	ENDIF
	1130	ELSE
	1131	q_init(k) = q_init(k-1)
	1132	ENDIF
[72]	1133	!
	1134	!-- Avoid negative humidities
	1135	IF ( q_init(k) < 0.0 ) THEN
	1136	q_init(k) = 0.0
	1137	ENDIF
[1]	1138	ENDDO
	1139
	1140	!
	1141	!-- In case of no given humidity gradients, choose zero gradient
	1142	!-- conditions
	1143	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
	1144	q_vertical_gradient_level(1) = 0.0
	1145	ENDIF
	1146
	1147	!
	1148	!-- Store humidity gradient at the top boundary for possile Neumann
	1149	!-- boundary condition
[19]	1150	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
[1]	1151
	1152	ENDIF
	1153
[94]	1154	!
	1155	!-- If required, compute initial salinity profile using the given salinity
	1156	!-- gradients
	1157	IF ( ocean ) THEN
	1158
	1159	i = 1
	1160	gradient = 0.0
	1161
	1162	sa_vertical_gradient_level_ind(1) = nzt+1
	1163	DO k = nzt, 0, -1
[177]	1164	IF ( i < 11 ) THEN
	1165	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
	1166	sa_vertical_gradient_level(i) <= 0.0 ) THEN
	1167	gradient = sa_vertical_gradient(i) / 100.0
	1168	sa_vertical_gradient_level_ind(i) = k + 1
	1169	i = i + 1
[94]	1170	ENDIF
	1171	ENDIF
	1172	IF ( gradient /= 0.0 ) THEN
	1173	IF ( k /= nzt ) THEN
	1174	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
	1175	ELSE
	1176	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
	1177	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
	1178	ENDIF
	1179	ELSE
	1180	sa_init(k) = sa_init(k+1)
	1181	ENDIF
	1182	ENDDO
	1183
	1184	ENDIF
	1185
[138]	1186	!
[388]	1187	!-- If required compute the profile of leaf area density used in the plant
	1188	!-- canopy model
[138]	1189	IF ( plant_canopy ) THEN
	1190
	1191	i = 1
	1192	gradient = 0.0
[1]	1193
[138]	1194	IF ( .NOT. ocean ) THEN
[153]	1195
	1196	lad(0) = lad_surface
[138]	1197
	1198	lad_vertical_gradient_level_ind(1) = 0
	1199	DO k = 1, pch_index
[177]	1200	IF ( i < 11 ) THEN
	1201	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
	1202	lad_vertical_gradient_level(i) >= 0.0 ) THEN
	1203	gradient = lad_vertical_gradient(i)
	1204	lad_vertical_gradient_level_ind(i) = k - 1
	1205	i = i + 1
[138]	1206	ENDIF
	1207	ENDIF
	1208	IF ( gradient /= 0.0 ) THEN
	1209	IF ( k /= 1 ) THEN
	1210	lad(k) = lad(k-1) + dzu(k) * gradient
	1211	ELSE
	1212	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
	1213	ENDIF
	1214	ELSE
	1215	lad(k) = lad(k-1)
	1216	ENDIF
	1217	ENDDO
	1218
	1219	ENDIF
	1220
[1]	1221	!
[388]	1222	!-- In case of no given leaf area density gradients, choose a vanishing
	1223	!-- gradient
[138]	1224	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
	1225	lad_vertical_gradient_level(1) = 0.0
	1226	ENDIF
	1227
	1228	ENDIF
	1229
	1230	ENDIF
[411]	1231
	1232	!
	1233	!-- Initialize large scale subsidence if required
[580]	1234	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
[411]	1235	large_scale_subsidence = .TRUE.
	1236	CALL init_w_subsidence
	1237	END IF
	1238
[138]	1239
[667]	1240
[138]	1241	!
[1]	1242	!-- Compute Coriolis parameter
	1243	f = 2.0 * omega * SIN( phi / 180.0 * pi )
	1244	fs = 2.0 * omega * COS( phi / 180.0 * pi )
	1245
	1246	!
[97]	1247	!-- Ocean runs always use reference values in the buoyancy term. Therefore
	1248	!-- set the reference temperature equal to the surface temperature.
	1249	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
[57]	1250
	1251	!
[97]	1252	!-- Reference value has to be used in buoyancy terms
	1253	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
	1254
	1255	!
	1256	!-- Sign of buoyancy/stability terms
	1257	IF ( ocean ) atmos_ocean_sign = -1.0
	1258
	1259	!
[108]	1260	!-- Ocean version must use flux boundary conditions at the top
	1261	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
[215]	1262	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
[226]	1263	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
[108]	1264	ENDIF
[97]	1265
	1266	!
[1]	1267	!-- In case of a given slope, compute the relevant quantities
	1268	IF ( alpha_surface /= 0.0 ) THEN
	1269	IF ( ABS( alpha_surface ) > 90.0 ) THEN
[215]	1270	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
	1271	' ) must be < 90.0'
[226]	1272	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
[1]	1273	ENDIF
	1274	sloping_surface = .TRUE.
	1275	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
	1276	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
	1277	ENDIF
	1278
	1279	!
	1280	!-- Check time step and cfl_factor
	1281	IF ( dt /= -1.0 ) THEN
	1282	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
[215]	1283	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
[226]	1284	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
[1]	1285	ENDIF
	1286	dt_3d = dt
	1287	dt_fixed = .TRUE.
	1288	ENDIF
	1289
	1290	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
	1291	IF ( cfl_factor == -1.0 ) THEN
[1001]	1292	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
[1]	1293	cfl_factor = 0.8
[1001]	1294	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
	1295	cfl_factor = 0.9
[1]	1296	ELSE
[1001]	1297	cfl_factor = 0.9
[1]	1298	ENDIF
	1299	ELSE
[215]	1300	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
	1301	' out of range & 0.0 < cfl_factor <= 1.0 is required'
[226]	1302	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
[1]	1303	ENDIF
	1304	ENDIF
	1305
	1306	!
	1307	!-- Store simulated time at begin
	1308	simulated_time_at_begin = simulated_time
	1309
	1310	!
[291]	1311	!-- Store reference time for coupled runs and change the coupling flag,
	1312	!-- if ...
	1313	IF ( simulated_time == 0.0 ) THEN
	1314	IF ( coupling_start_time == 0.0 ) THEN
	1315	time_since_reference_point = 0.0
	1316	ELSEIF ( time_since_reference_point < 0.0 ) THEN
	1317	run_coupled = .FALSE.
	1318	ENDIF
	1319	ENDIF
	1320
	1321	!
[1]	1322	!-- Set wind speed in the Galilei-transformed system
	1323	IF ( galilei_transformation ) THEN
	1324	IF ( use_ug_for_galilei_tr .AND. &
	1325	ug_vertical_gradient_level(1) == 0.0 .AND. &
	1326	vg_vertical_gradient_level(1) == 0.0 ) THEN
[866]	1327	u_gtrans = ug_surface * 0.6
	1328	v_gtrans = vg_surface * 0.6
[1]	1329	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1330	ug_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1331	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
	1332	' with galilei transformation'
[226]	1333	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
[1]	1334	ELSEIF ( use_ug_for_galilei_tr .AND. &
	1335	vg_vertical_gradient_level(1) /= 0.0 ) THEN
[215]	1336	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
	1337	' with galilei transformation'
[226]	1338	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
[1]	1339	ELSE
[215]	1340	message_string = 'variable translation speed used for galilei-' // &
	1341	'transformation, which may cause & instabilities in stably ' // &
	1342	'stratified regions'
[226]	1343	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
[1]	1344	ENDIF
	1345	ENDIF
	1346
	1347	!
	1348	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
	1349	!-- fluxes have to be used in the diffusion-terms
	1350	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
	1351
	1352	!
	1353	!-- Check boundary conditions and set internal variables:
	1354	!-- Lateral boundary conditions
[73]	1355	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
[978]	1356	bc_lr /= 'radiation/dirichlet' .AND. bc_lr /= 'dirichlet/neumann' &
	1357	.AND. bc_lr /= 'neumann/dirichlet' ) THEN
[215]	1358	message_string = 'unknown boundary condition: bc_lr = "' // &
	1359	TRIM( bc_lr ) // '"'
[226]	1360	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
[1]	1361	ENDIF
[73]	1362	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
[978]	1363	bc_ns /= 'radiation/dirichlet' .AND. bc_ns /= 'dirichlet/neumann' &
	1364	.AND. bc_ns /= 'neumann/dirichlet' ) THEN
[215]	1365	message_string = 'unknown boundary condition: bc_ns = "' // &
	1366	TRIM( bc_ns ) // '"'
[226]	1367	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
[1]	1368	ENDIF
	1369
	1370	!
[366]	1371	!-- Internal variables used for speed optimization in if clauses
[707]	1372	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
	1373	IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE.
	1374	IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE.
[978]	1375	IF ( bc_lr == 'dirichlet/neumann' ) bc_lr_dirneu = .TRUE.
	1376	IF ( bc_lr == 'neumann/dirichlet' ) bc_lr_neudir = .TRUE.
[707]	1377	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
	1378	IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE.
	1379	IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE.
[978]	1380	IF ( bc_ns == 'dirichlet/neumann' ) bc_ns_dirneu = .TRUE.
	1381	IF ( bc_ns == 'neumann/dirichlet' ) bc_ns_neudir = .TRUE.
[366]	1382
	1383	!
[1]	1384	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
[667]	1385	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
	1386	!-- and tools do not work with non-cyclic boundary conditions.
[1]	1387	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1388	IF ( psolver /= 'multigrid' ) THEN
[215]	1389	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1390	'psolver = "' // TRIM( psolver ) // '"'
[226]	1391	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
[1]	1392	ENDIF
[667]	1393	IF ( momentum_advec /= 'pw-scheme' .AND. &
	1394	momentum_advec /= 'ws-scheme') THEN
[215]	1395	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1396	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
[226]	1397	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
[1]	1398	ENDIF
[667]	1399	IF ( scalar_advec /= 'pw-scheme' .AND. &
	1400	scalar_advec /= 'ws-scheme' ) THEN
[215]	1401	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1402	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
[226]	1403	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
[1]	1404	ENDIF
	1405	IF ( galilei_transformation ) THEN
[215]	1406	message_string = 'non-cyclic lateral boundaries do not allow ' // &
	1407	'galilei_transformation = .T.'
[226]	1408	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
[1]	1409	ENDIF
	1410	ENDIF
	1411
	1412	!
	1413	!-- Bottom boundary condition for the turbulent Kinetic energy
	1414	IF ( bc_e_b == 'neumann' ) THEN
	1415	ibc_e_b = 1
	1416	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
	1417	ibc_e_b = 2
[1015]	1418	IF ( prandtl_layer ) THEN
	1419	message_string = 'adjust mixing length = FALSE and bc_e_b = "' // &
[215]	1420	TRIM( bc_e_b ) // '"'
[226]	1421	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
[1]	1422	ENDIF
	1423	IF ( .NOT. prandtl_layer ) THEN
	1424	bc_e_b = 'neumann'
	1425	ibc_e_b = 1
[215]	1426	message_string = 'boundary condition bc_e_b changed to "' // &
	1427	TRIM( bc_e_b ) // '"'
[226]	1428	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
[1]	1429	ENDIF
	1430	ELSE
[215]	1431	message_string = 'unknown boundary condition: bc_e_b = "' // &
	1432	TRIM( bc_e_b ) // '"'
[226]	1433	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
[1]	1434	ENDIF
	1435
	1436	!
	1437	!-- Boundary conditions for perturbation pressure
	1438	IF ( bc_p_b == 'dirichlet' ) THEN
	1439	ibc_p_b = 0
	1440	ELSEIF ( bc_p_b == 'neumann' ) THEN
	1441	ibc_p_b = 1
	1442	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
	1443	ibc_p_b = 2
	1444	ELSE
[215]	1445	message_string = 'unknown boundary condition: bc_p_b = "' // &
	1446	TRIM( bc_p_b ) // '"'
[226]	1447	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
[1]	1448	ENDIF
	1449	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
[215]	1450	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
	1451	'" not allowed with prandtl_layer = .FALSE.'
[226]	1452	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
[1]	1453	ENDIF
	1454	IF ( bc_p_t == 'dirichlet' ) THEN
	1455	ibc_p_t = 0
	1456	ELSEIF ( bc_p_t == 'neumann' ) THEN
	1457	ibc_p_t = 1
	1458	ELSE
[215]	1459	message_string = 'unknown boundary condition: bc_p_t = "' // &
	1460	TRIM( bc_p_t ) // '"'
[226]	1461	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
[1]	1462	ENDIF
	1463
	1464	!
	1465	!-- Boundary conditions for potential temperature
[102]	1466	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1467	ibc_pt_b = 2
[1]	1468	ELSE
[102]	1469	IF ( bc_pt_b == 'dirichlet' ) THEN
	1470	ibc_pt_b = 0
	1471	ELSEIF ( bc_pt_b == 'neumann' ) THEN
	1472	ibc_pt_b = 1
	1473	ELSE
[215]	1474	message_string = 'unknown boundary condition: bc_pt_b = "' // &
	1475	TRIM( bc_pt_b ) // '"'
[226]	1476	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
[1]	1477	ENDIF
	1478	ENDIF
[102]	1479
[1]	1480	IF ( bc_pt_t == 'dirichlet' ) THEN
	1481	ibc_pt_t = 0
	1482	ELSEIF ( bc_pt_t == 'neumann' ) THEN
	1483	ibc_pt_t = 1
[19]	1484	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
	1485	ibc_pt_t = 2
[1]	1486	ELSE
[215]	1487	message_string = 'unknown boundary condition: bc_pt_t = "' // &
	1488	TRIM( bc_pt_t ) // '"'
[226]	1489	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
[1]	1490	ENDIF
	1491
[20]	1492	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
	1493	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
[940]	1494
	1495	IF ( neutral ) THEN
	1496
	1497	IF ( surface_heatflux /= 0.0 .AND. surface_heatflux /= 9999999.9 ) &
	1498	THEN
	1499	message_string = 'heatflux must not be set for pure neutral flow'
	1500	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1501	ENDIF
	1502
	1503	IF ( top_heatflux /= 0.0 .AND. top_heatflux /= 9999999.9 ) &
	1504	THEN
	1505	message_string = 'heatflux must not be set for pure neutral flow'
	1506	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
	1507	ENDIF
	1508
	1509	ENDIF
	1510
[103]	1511	IF ( top_momentumflux_u /= 9999999.9 .AND. &
	1512	top_momentumflux_v /= 9999999.9 ) THEN
	1513	constant_top_momentumflux = .TRUE.
	1514	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
[215]	1515	top_momentumflux_v == 9999999.9 ) ) THEN
	1516	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
	1517	'must be set'
[226]	1518	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
[103]	1519	ENDIF
[1]	1520
	1521	!
	1522	!-- A given surface temperature implies Dirichlet boundary condition for
	1523	!-- temperature. In this case specification of a constant heat flux is
	1524	!-- forbidden.
	1525	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
	1526	surface_heatflux /= 0.0 ) THEN
[215]	1527	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
	1528	'& is not allowed with constant_heatflux = .TRUE.'
[226]	1529	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
[1]	1530	ENDIF
	1531	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
[215]	1532	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
	1533	'wed with pt_surface_initial_change (/=0) = ', &
	1534	pt_surface_initial_change
[226]	1535	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
[1]	1536	ENDIF
	1537
	1538	!
[19]	1539	!-- A given temperature at the top implies Dirichlet boundary condition for
	1540	!-- temperature. In this case specification of a constant heat flux is
	1541	!-- forbidden.
	1542	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
	1543	top_heatflux /= 0.0 ) THEN
[215]	1544	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
	1545	'" is not allowed with constant_top_heatflux = .TRUE.'
[226]	1546	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
[19]	1547	ENDIF
	1548
	1549	!
[95]	1550	!-- Boundary conditions for salinity
	1551	IF ( ocean ) THEN
	1552	IF ( bc_sa_t == 'dirichlet' ) THEN
	1553	ibc_sa_t = 0
	1554	ELSEIF ( bc_sa_t == 'neumann' ) THEN
	1555	ibc_sa_t = 1
	1556	ELSE
[215]	1557	message_string = 'unknown boundary condition: bc_sa_t = "' // &
	1558	TRIM( bc_sa_t ) // '"'
[226]	1559	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
[95]	1560	ENDIF
	1561
	1562	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
[97]	1563	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
[215]	1564	message_string = 'boundary condition: bc_sa_t = "' // &
	1565	TRIM( bc_sa_t ) // '" requires to set ' // &
	1566	'top_salinityflux'
[226]	1567	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
[97]	1568	ENDIF
[95]	1569
	1570	!
	1571	!-- A fixed salinity at the top implies Dirichlet boundary condition for
	1572	!-- salinity. In this case specification of a constant salinity flux is
	1573	!-- forbidden.
	1574	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
	1575	top_salinityflux /= 0.0 ) THEN
[215]	1576	message_string = 'boundary condition: bc_sa_t = "' // &
	1577	TRIM( bc_sa_t ) // '" is not allowed with ' // &
	1578	'constant_top_salinityflux = .TRUE.'
[226]	1579	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
[95]	1580	ENDIF
	1581
	1582	ENDIF
	1583
	1584	!
[75]	1585	!-- In case of humidity or passive scalar, set boundary conditions for total
[1]	1586	!-- water content / scalar
[75]	1587	IF ( humidity .OR. passive_scalar ) THEN
	1588	IF ( humidity ) THEN
[1]	1589	sq = 'q'
	1590	ELSE
	1591	sq = 's'
	1592	ENDIF
	1593	IF ( bc_q_b == 'dirichlet' ) THEN
	1594	ibc_q_b = 0
	1595	ELSEIF ( bc_q_b == 'neumann' ) THEN
	1596	ibc_q_b = 1
	1597	ELSE
[215]	1598	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1599	'_b ="' // TRIM( bc_q_b ) // '"'
[226]	1600	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
[1]	1601	ENDIF
	1602	IF ( bc_q_t == 'dirichlet' ) THEN
	1603	ibc_q_t = 0
	1604	ELSEIF ( bc_q_t == 'neumann' ) THEN
	1605	ibc_q_t = 1
	1606	ELSE
[215]	1607	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
	1608	'_t ="' // TRIM( bc_q_t ) // '"'
[226]	1609	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
[1]	1610	ENDIF
	1611
[600]	1612	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
[1]	1613
	1614	!
	1615	!-- A given surface humidity implies Dirichlet boundary condition for
[75]	1616	!-- humidity. In this case specification of a constant water flux is
[1]	1617	!-- forbidden.
	1618	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
[215]	1619	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
	1620	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
	1621	'th prescribed surface flux'
[226]	1622	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
[1]	1623	ENDIF
	1624	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
[215]	1625	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
	1626	'wed with ', sq, '_surface_initial_change (/=0) = ', &
	1627	q_surface_initial_change
[226]	1628	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
[1]	1629	ENDIF
	1630
	1631	ENDIF
	1632
	1633	!
	1634	!-- Boundary conditions for horizontal components of wind speed
	1635	IF ( bc_uv_b == 'dirichlet' ) THEN
	1636	ibc_uv_b = 0
	1637	ELSEIF ( bc_uv_b == 'neumann' ) THEN
	1638	ibc_uv_b = 1
	1639	IF ( prandtl_layer ) THEN
[215]	1640	message_string = 'boundary condition: bc_uv_b = "' // &
	1641	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
[226]	1642	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
[1]	1643	ENDIF
	1644	ELSE
[215]	1645	message_string = 'unknown boundary condition: bc_uv_b = "' // &
	1646	TRIM( bc_uv_b ) // '"'
[226]	1647	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
[1]	1648	ENDIF
[667]	1649	!
	1650	!-- In case of coupled simulations u and v at the ground in atmosphere will be
	1651	!-- assigned with the u and v values of the ocean surface
	1652	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
	1653	ibc_uv_b = 2
	1654	ENDIF
[215]	1655
[108]	1656	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	1657	bc_uv_t = 'neumann'
[1]	1658	ibc_uv_t = 1
	1659	ELSE
[132]	1660	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
[108]	1661	ibc_uv_t = 0
[767]	1662	IF ( bc_uv_t == 'dirichlet_0' ) THEN
	1663	!
	1664	!-- Velocities for the initial u,v-profiles are set zero at the top
	1665	!-- in case of dirichlet_0 conditions
	1666	u_init(nzt+1) = 0.0
	1667	v_init(nzt+1) = 0.0
	1668	ENDIF
[108]	1669	ELSEIF ( bc_uv_t == 'neumann' ) THEN
	1670	ibc_uv_t = 1
	1671	ELSE
[215]	1672	message_string = 'unknown boundary condition: bc_uv_t = "' // &
	1673	TRIM( bc_uv_t ) // '"'
[226]	1674	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
[1]	1675	ENDIF
	1676	ENDIF
	1677
	1678	!
	1679	!-- Compute and check, respectively, the Rayleigh Damping parameter
	1680	IF ( rayleigh_damping_factor == -1.0 ) THEN
[1001]	1681	rayleigh_damping_factor = 0.0
[1]	1682	ELSE
	1683	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
	1684	THEN
[215]	1685	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
	1686	rayleigh_damping_factor, ' out of range [0.0,1.0]'
[226]	1687	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
[1]	1688	ENDIF
	1689	ENDIF
	1690
	1691	IF ( rayleigh_damping_height == -1.0 ) THEN
[108]	1692	IF ( .NOT. ocean ) THEN
	1693	rayleigh_damping_height = 0.66666666666 * zu(nzt)
	1694	ELSE
	1695	rayleigh_damping_height = 0.66666666666 * zu(nzb)
	1696	ENDIF
[1]	1697	ELSE
[108]	1698	IF ( .NOT. ocean ) THEN
	1699	IF ( rayleigh_damping_height < 0.0 .OR. &
	1700	rayleigh_damping_height > zu(nzt) ) THEN
[215]	1701	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1702	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
[226]	1703	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[1]	1704	ENDIF
[108]	1705	ELSE
	1706	IF ( rayleigh_damping_height > 0.0 .OR. &
	1707	rayleigh_damping_height < zu(nzb) ) THEN
[215]	1708	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
	1709	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
[226]	1710	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
[108]	1711	ENDIF
[1]	1712	ENDIF
	1713	ENDIF
	1714
	1715	!
	1716	!-- Check number of chosen statistic regions. More than 10 regions are not
	1717	!-- allowed, because so far no more than 10 corresponding output files can
	1718	!-- be opened (cf. check_open)
	1719	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
[215]	1720	WRITE ( message_string, * ) 'number of statistic_regions = ', &
	1721	statistic_regions+1, ' but only 10 regions are allowed'
[226]	1722	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
[1]	1723	ENDIF
	1724	IF ( normalizing_region > statistic_regions .OR. &
	1725	normalizing_region < 0) THEN
[215]	1726	WRITE ( message_string, * ) 'normalizing_region = ', &
	1727	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
	1728	' (value of statistic_regions)'
[226]	1729	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
[1]	1730	ENDIF
	1731
	1732	!
[116]	1733	!-- Check the interval for sorting particles.
	1734	!-- Using particles as cloud droplets requires sorting after each timestep.
	1735	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
	1736	dt_sort_particles = 0.0
[215]	1737	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
	1738	'_droplets = .TRUE.'
[226]	1739	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
[116]	1740	ENDIF
	1741
	1742	!
[1]	1743	!-- Set the default intervals for data output, if necessary
	1744	!-- NOTE: dt_dosp has already been set in package_parin
	1745	IF ( dt_data_output /= 9999999.9 ) THEN
	1746	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
	1747	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
	1748	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
	1749	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
	1750	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
	1751	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
	1752	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
[564]	1753	DO mid = 1, max_masks
[410]	1754	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
	1755	ENDDO
[1]	1756	ENDIF
	1757
	1758	!
	1759	!-- Set the default skip time intervals for data output, if necessary
	1760	IF ( skip_time_dopr == 9999999.9 ) &
	1761	skip_time_dopr = skip_time_data_output
	1762	IF ( skip_time_dosp == 9999999.9 ) &
	1763	skip_time_dosp = skip_time_data_output
	1764	IF ( skip_time_do2d_xy == 9999999.9 ) &
	1765	skip_time_do2d_xy = skip_time_data_output
	1766	IF ( skip_time_do2d_xz == 9999999.9 ) &
	1767	skip_time_do2d_xz = skip_time_data_output
	1768	IF ( skip_time_do2d_yz == 9999999.9 ) &
	1769	skip_time_do2d_yz = skip_time_data_output
	1770	IF ( skip_time_do3d == 9999999.9 ) &
	1771	skip_time_do3d = skip_time_data_output
	1772	IF ( skip_time_data_output_av == 9999999.9 ) &
	1773	skip_time_data_output_av = skip_time_data_output
[564]	1774	DO mid = 1, max_masks
[410]	1775	IF ( skip_time_domask(mid) == 9999999.9 ) &
	1776	skip_time_domask(mid) = skip_time_data_output
	1777	ENDDO
[1]	1778
	1779	!
	1780	!-- Check the average intervals (first for 3d-data, then for profiles and
	1781	!-- spectra)
	1782	IF ( averaging_interval > dt_data_output_av ) THEN
[215]	1783	WRITE( message_string, * ) 'averaging_interval = ', &
	1784	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
[226]	1785	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
[1]	1786	ENDIF
	1787
	1788	IF ( averaging_interval_pr == 9999999.9 ) THEN
	1789	averaging_interval_pr = averaging_interval
	1790	ENDIF
	1791
	1792	IF ( averaging_interval_pr > dt_dopr ) THEN
[215]	1793	WRITE( message_string, * ) 'averaging_interval_pr = ', &
	1794	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
[226]	1795	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
[1]	1796	ENDIF
	1797
	1798	IF ( averaging_interval_sp == 9999999.9 ) THEN
	1799	averaging_interval_sp = averaging_interval
	1800	ENDIF
	1801
	1802	IF ( averaging_interval_sp > dt_dosp ) THEN
[215]	1803	WRITE( message_string, * ) 'averaging_interval_sp = ', &
	1804	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
[226]	1805	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
[1]	1806	ENDIF
	1807
	1808	!
	1809	!-- Set the default interval for profiles entering the temporal average
	1810	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
	1811	dt_averaging_input_pr = dt_averaging_input
	1812	ENDIF
	1813
	1814	!
	1815	!-- Set the default interval for the output of timeseries to a reasonable
	1816	!-- value (tries to minimize the number of calls of flow_statistics)
	1817	IF ( dt_dots == 9999999.9 ) THEN
	1818	IF ( averaging_interval_pr == 0.0 ) THEN
	1819	dt_dots = MIN( dt_run_control, dt_dopr )
	1820	ELSE
	1821	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
	1822	ENDIF
	1823	ENDIF
	1824
	1825	!
	1826	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
	1827	IF ( dt_averaging_input > averaging_interval ) THEN
[215]	1828	WRITE( message_string, * ) 'dt_averaging_input = ', &
	1829	dt_averaging_input, ' must be <= averaging_interval = ', &
	1830	averaging_interval
[226]	1831	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
[1]	1832	ENDIF
	1833
	1834	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
[215]	1835	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
	1836	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
	1837	averaging_interval_pr
[226]	1838	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
[1]	1839	ENDIF
	1840
	1841	!
[72]	1842	!-- Set the default value for the integration interval of precipitation amount
	1843	IF ( precipitation ) THEN
	1844	IF ( precipitation_amount_interval == 9999999.9 ) THEN
	1845	precipitation_amount_interval = dt_do2d_xy
	1846	ELSE
	1847	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
[215]	1848	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
	1849	precipitation_amount_interval, ' must not be larger than ', &
	1850	'dt_do2d_xy = ', dt_do2d_xy
[226]	1851	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
[72]	1852	ENDIF
	1853	ENDIF
	1854	ENDIF
	1855
	1856	!
[1]	1857	!-- Determine the number of output profiles and check whether they are
	1858	!-- permissible
	1859	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
	1860
	1861	dopr_n = dopr_n + 1
	1862	i = dopr_n
	1863
	1864	!
	1865	!-- Determine internal profile number (for hom, homs)
	1866	!-- and store height levels
	1867	SELECT CASE ( TRIM( data_output_pr(i) ) )
	1868
	1869	CASE ( 'u', '#u' )
	1870	dopr_index(i) = 1
[87]	1871	dopr_unit(i) = 'm/s'
[1]	1872	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
	1873	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1874	dopr_initial_index(i) = 5
	1875	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
	1876	data_output_pr(i) = data_output_pr(i)(2:)
	1877	ENDIF
	1878
	1879	CASE ( 'v', '#v' )
	1880	dopr_index(i) = 2
[87]	1881	dopr_unit(i) = 'm/s'
	1882	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	1883	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1884	dopr_initial_index(i) = 6
	1885	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
	1886	data_output_pr(i) = data_output_pr(i)(2:)
	1887	ENDIF
	1888
	1889	CASE ( 'w' )
	1890	dopr_index(i) = 3
[87]	1891	dopr_unit(i) = 'm/s'
	1892	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	1893
	1894	CASE ( 'pt', '#pt' )
	1895	IF ( .NOT. cloud_physics ) THEN
	1896	dopr_index(i) = 4
[87]	1897	dopr_unit(i) = 'K'
[1]	1898	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	1899	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1900	dopr_initial_index(i) = 7
	1901	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1902	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
[1]	1903	data_output_pr(i) = data_output_pr(i)(2:)
	1904	ENDIF
	1905	ELSE
	1906	dopr_index(i) = 43
[87]	1907	dopr_unit(i) = 'K'
[1]	1908	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
	1909	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1910	dopr_initial_index(i) = 28
	1911	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
[87]	1912	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
[1]	1913	data_output_pr(i) = data_output_pr(i)(2:)
	1914	ENDIF
	1915	ENDIF
	1916
	1917	CASE ( 'e' )
	1918	dopr_index(i) = 8
[87]	1919	dopr_unit(i) = 'm2/s2'
[1]	1920	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
	1921	hom(nzb,2,8,:) = 0.0
	1922
	1923	CASE ( 'km', '#km' )
	1924	dopr_index(i) = 9
[87]	1925	dopr_unit(i) = 'm2/s'
[1]	1926	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
	1927	hom(nzb,2,9,:) = 0.0
	1928	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1929	dopr_initial_index(i) = 23
	1930	hom(:,2,23,:) = hom(:,2,9,:)
	1931	data_output_pr(i) = data_output_pr(i)(2:)
	1932	ENDIF
	1933
	1934	CASE ( 'kh', '#kh' )
	1935	dopr_index(i) = 10
[87]	1936	dopr_unit(i) = 'm2/s'
[1]	1937	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
	1938	hom(nzb,2,10,:) = 0.0
	1939	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1940	dopr_initial_index(i) = 24
	1941	hom(:,2,24,:) = hom(:,2,10,:)
	1942	data_output_pr(i) = data_output_pr(i)(2:)
	1943	ENDIF
	1944
	1945	CASE ( 'l', '#l' )
	1946	dopr_index(i) = 11
[87]	1947	dopr_unit(i) = 'm'
[1]	1948	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
	1949	hom(nzb,2,11,:) = 0.0
	1950	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	1951	dopr_initial_index(i) = 25
	1952	hom(:,2,25,:) = hom(:,2,11,:)
	1953	data_output_pr(i) = data_output_pr(i)(2:)
	1954	ENDIF
	1955
	1956	CASE ( 'w"u"' )
	1957	dopr_index(i) = 12
[87]	1958	dopr_unit(i) = 'm2/s2'
[1]	1959	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
	1960	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
	1961
	1962	CASE ( 'wu' )
	1963	dopr_index(i) = 13
[87]	1964	dopr_unit(i) = 'm2/s2'
[1]	1965	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
	1966
	1967	CASE ( 'w"v"' )
	1968	dopr_index(i) = 14
[87]	1969	dopr_unit(i) = 'm2/s2'
[1]	1970	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
	1971	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
	1972
	1973	CASE ( 'wv' )
	1974	dopr_index(i) = 15
[87]	1975	dopr_unit(i) = 'm2/s2'
[1]	1976	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
	1977
	1978	CASE ( 'w"pt"' )
	1979	dopr_index(i) = 16
[87]	1980	dopr_unit(i) = 'K m/s'
[1]	1981	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
	1982
	1983	CASE ( 'wpt' )
	1984	dopr_index(i) = 17
[87]	1985	dopr_unit(i) = 'K m/s'
[1]	1986	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
	1987
	1988	CASE ( 'wpt' )
	1989	dopr_index(i) = 18
[87]	1990	dopr_unit(i) = 'K m/s'
[1]	1991	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
	1992
	1993	CASE ( 'wu' )
	1994	dopr_index(i) = 19
[87]	1995	dopr_unit(i) = 'm2/s2'
[1]	1996	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
	1997	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
	1998
	1999	CASE ( 'wv' )
	2000	dopr_index(i) = 20
[87]	2001	dopr_unit(i) = 'm2/s2'
[1]	2002	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
	2003	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
	2004
	2005	CASE ( 'wptBC' )
	2006	dopr_index(i) = 21
[87]	2007	dopr_unit(i) = 'K m/s'
[1]	2008	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
	2009
	2010	CASE ( 'wptBC' )
	2011	dopr_index(i) = 22
[87]	2012	dopr_unit(i) = 'K m/s'
[1]	2013	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
	2014
[96]	2015	CASE ( 'sa', '#sa' )
	2016	IF ( .NOT. ocean ) THEN
[215]	2017	message_string = 'data_output_pr = ' // &
	2018	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2019	'lemented for ocean = .FALSE.'
[226]	2020	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2021	ELSE
	2022	dopr_index(i) = 23
	2023	dopr_unit(i) = 'psu'
	2024	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
	2025	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2026	dopr_initial_index(i) = 26
	2027	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2028	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2029	data_output_pr(i) = data_output_pr(i)(2:)
	2030	ENDIF
	2031	ENDIF
	2032
[1]	2033	CASE ( 'u*2' )
	2034	dopr_index(i) = 30
[87]	2035	dopr_unit(i) = 'm2/s2'
[1]	2036	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
	2037
	2038	CASE ( 'v*2' )
	2039	dopr_index(i) = 31
[87]	2040	dopr_unit(i) = 'm2/s2'
[1]	2041	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
	2042
	2043	CASE ( 'w*2' )
	2044	dopr_index(i) = 32
[87]	2045	dopr_unit(i) = 'm2/s2'
[1]	2046	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
	2047
	2048	CASE ( 'pt*2' )
	2049	dopr_index(i) = 33
[87]	2050	dopr_unit(i) = 'K2'
[1]	2051	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
	2052
	2053	CASE ( 'e*' )
	2054	dopr_index(i) = 34
[87]	2055	dopr_unit(i) = 'm2/s2'
[1]	2056	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
	2057
	2058	CASE ( 'w2pt' )
	2059	dopr_index(i) = 35
[87]	2060	dopr_unit(i) = 'K m2/s2'
[1]	2061	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
	2062
	2063	CASE ( 'wpt2' )
	2064	dopr_index(i) = 36
[87]	2065	dopr_unit(i) = 'K2 m/s'
[1]	2066	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
	2067
	2068	CASE ( 'we' )
	2069	dopr_index(i) = 37
[87]	2070	dopr_unit(i) = 'm3/s3'
[1]	2071	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
	2072
	2073	CASE ( 'w*3' )
	2074	dopr_index(i) = 38
[87]	2075	dopr_unit(i) = 'm3/s3'
[1]	2076	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
	2077
	2078	CASE ( 'Sw' )
	2079	dopr_index(i) = 39
[89]	2080	dopr_unit(i) = 'none'
[1]	2081	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
	2082
[232]	2083	CASE ( 'p' )
	2084	dopr_index(i) = 40
	2085	dopr_unit(i) = 'Pa'
	2086	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
	2087
[1]	2088	CASE ( 'q', '#q' )
[108]	2089	IF ( .NOT. humidity ) THEN
[215]	2090	message_string = 'data_output_pr = ' // &
	2091	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2092	'lemented for humidity = .FALSE.'
[226]	2093	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2094	ELSE
	2095	dopr_index(i) = 41
[87]	2096	dopr_unit(i) = 'kg/kg'
	2097	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2098	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2099	dopr_initial_index(i) = 26
	2100	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2101	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2102	data_output_pr(i) = data_output_pr(i)(2:)
	2103	ENDIF
	2104	ENDIF
	2105
	2106	CASE ( 's', '#s' )
	2107	IF ( .NOT. passive_scalar ) THEN
[215]	2108	message_string = 'data_output_pr = ' // &
	2109	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2110	'lemented for passive_scalar = .FALSE.'
[226]	2111	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2112	ELSE
	2113	dopr_index(i) = 41
[87]	2114	dopr_unit(i) = 'kg/m3'
	2115	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2116	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2117	dopr_initial_index(i) = 26
	2118	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2119	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2120	data_output_pr(i) = data_output_pr(i)(2:)
	2121	ENDIF
	2122	ENDIF
	2123
	2124	CASE ( 'qv', '#qv' )
	2125	IF ( .NOT. cloud_physics ) THEN
	2126	dopr_index(i) = 41
[87]	2127	dopr_unit(i) = 'kg/kg'
	2128	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2129	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2130	dopr_initial_index(i) = 26
	2131	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
	2132	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
	2133	data_output_pr(i) = data_output_pr(i)(2:)
	2134	ENDIF
	2135	ELSE
	2136	dopr_index(i) = 42
[87]	2137	dopr_unit(i) = 'kg/kg'
	2138	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2139	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2140	dopr_initial_index(i) = 27
	2141	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
	2142	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
	2143	data_output_pr(i) = data_output_pr(i)(2:)
	2144	ENDIF
	2145	ENDIF
	2146
	2147	CASE ( 'lpt', '#lpt' )
	2148	IF ( .NOT. cloud_physics ) THEN
[215]	2149	message_string = 'data_output_pr = ' // &
	2150	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2151	'lemented for cloud_physics = .FALSE.'
[226]	2152	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
[1]	2153	ELSE
	2154	dopr_index(i) = 4
[87]	2155	dopr_unit(i) = 'K'
[1]	2156	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
	2157	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2158	dopr_initial_index(i) = 7
	2159	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
	2160	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
	2161	data_output_pr(i) = data_output_pr(i)(2:)
	2162	ENDIF
	2163	ENDIF
	2164
	2165	CASE ( 'vpt', '#vpt' )
	2166	dopr_index(i) = 44
[87]	2167	dopr_unit(i) = 'K'
	2168	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
[1]	2169	IF ( data_output_pr(i)(1:1) == '#' ) THEN
	2170	dopr_initial_index(i) = 29
	2171	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
	2172	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
	2173	data_output_pr(i) = data_output_pr(i)(2:)
	2174	ENDIF
	2175
	2176	CASE ( 'w"vpt"' )
	2177	dopr_index(i) = 45
[87]	2178	dopr_unit(i) = 'K m/s'
[1]	2179	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
	2180
	2181	CASE ( 'wvpt' )
	2182	dopr_index(i) = 46
[87]	2183	dopr_unit(i) = 'K m/s'
[1]	2184	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
	2185
	2186	CASE ( 'wvpt' )
	2187	dopr_index(i) = 47
[87]	2188	dopr_unit(i) = 'K m/s'
[1]	2189	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
	2190
	2191	CASE ( 'w"q"' )
[108]	2192	IF ( .NOT. humidity ) THEN
[215]	2193	message_string = 'data_output_pr = ' // &
	2194	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2195	'lemented for humidity = .FALSE.'
[226]	2196	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2197	ELSE
	2198	dopr_index(i) = 48
[87]	2199	dopr_unit(i) = 'kg/kg m/s'
[1]	2200	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2201	ENDIF
	2202
	2203	CASE ( 'wq' )
[108]	2204	IF ( .NOT. humidity ) THEN
[215]	2205	message_string = 'data_output_pr = ' // &
	2206	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2207	'lemented for humidity = .FALSE.'
[226]	2208	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2209	ELSE
	2210	dopr_index(i) = 49
[87]	2211	dopr_unit(i) = 'kg/kg m/s'
[1]	2212	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2213	ENDIF
	2214
	2215	CASE ( 'wq' )
[108]	2216	IF ( .NOT. humidity ) THEN
[215]	2217	message_string = 'data_output_pr = ' // &
	2218	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2219	'lemented for humidity = .FALSE.'
[226]	2220	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[1]	2221	ELSE
	2222	dopr_index(i) = 50
[87]	2223	dopr_unit(i) = 'kg/kg m/s'
[1]	2224	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2225	ENDIF
	2226
	2227	CASE ( 'w"s"' )
	2228	IF ( .NOT. passive_scalar ) THEN
[215]	2229	message_string = 'data_output_pr = ' // &
	2230	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2231	'lemented for passive_scalar = .FALSE.'
[226]	2232	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2233	ELSE
	2234	dopr_index(i) = 48
[87]	2235	dopr_unit(i) = 'kg/m3 m/s'
[1]	2236	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
	2237	ENDIF
	2238
	2239	CASE ( 'ws' )
	2240	IF ( .NOT. passive_scalar ) THEN
[215]	2241	message_string = 'data_output_pr = ' // &
	2242	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2243	'lemented for passive_scalar = .FALSE.'
[226]	2244	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2245	ELSE
	2246	dopr_index(i) = 49
[87]	2247	dopr_unit(i) = 'kg/m3 m/s'
[1]	2248	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
	2249	ENDIF
	2250
	2251	CASE ( 'ws' )
	2252	IF ( .NOT. passive_scalar ) THEN
[215]	2253	message_string = 'data_output_pr = ' // &
	2254	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2255	'lemented for passive_scalar = .FALSE.'
[226]	2256	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
[1]	2257	ELSE
	2258	dopr_index(i) = 50
[87]	2259	dopr_unit(i) = 'kg/m3 m/s'
[1]	2260	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
	2261	ENDIF
	2262
	2263	CASE ( 'w"qv"' )
[75]	2264	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2265	THEN
	2266	dopr_index(i) = 48
[87]	2267	dopr_unit(i) = 'kg/kg m/s'
[1]	2268	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2269	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2270	dopr_index(i) = 51
[87]	2271	dopr_unit(i) = 'kg/kg m/s'
[1]	2272	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
	2273	ELSE
[215]	2274	message_string = 'data_output_pr = ' // &
	2275	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2276	'lemented for cloud_physics = .FALSE. an&' // &
	2277	'd humidity = .FALSE.'
[226]	2278	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2279	ENDIF
	2280
	2281	CASE ( 'wqv' )
[75]	2282	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2283	THEN
	2284	dopr_index(i) = 49
[87]	2285	dopr_unit(i) = 'kg/kg m/s'
[1]	2286	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2287	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2288	dopr_index(i) = 52
[87]	2289	dopr_unit(i) = 'kg/kg m/s'
[1]	2290	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
	2291	ELSE
[215]	2292	message_string = 'data_output_pr = ' // &
	2293	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2294	'lemented for cloud_physics = .FALSE. an&' // &
	2295	'd humidity = .FALSE.'
[226]	2296	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2297	ENDIF
	2298
	2299	CASE ( 'wqv' )
[75]	2300	IF ( humidity .AND. .NOT. cloud_physics ) &
[1]	2301	THEN
	2302	dopr_index(i) = 50
[87]	2303	dopr_unit(i) = 'kg/kg m/s'
[1]	2304	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
[75]	2305	ELSEIF( humidity .AND. cloud_physics ) THEN
[1]	2306	dopr_index(i) = 53
[87]	2307	dopr_unit(i) = 'kg/kg m/s'
[1]	2308	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
	2309	ELSE
[215]	2310	message_string = 'data_output_pr = ' // &
	2311	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2312	'lemented for cloud_physics = .FALSE. an&' // &
	2313	'd humidity = .FALSE.'
[226]	2314	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
[1]	2315	ENDIF
	2316
	2317	CASE ( 'ql' )
	2318	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
[215]	2319	message_string = 'data_output_pr = ' // &
	2320	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2321	'lemented for cloud_physics = .FALSE. or' // &
	2322	'&cloud_droplets = .FALSE.'
[226]	2323	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
[1]	2324	ELSE
	2325	dopr_index(i) = 54
[87]	2326	dopr_unit(i) = 'kg/kg'
[1]	2327	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
	2328	ENDIF
	2329
[524]	2330	CASE ( 'wuu*:dz' )
[1]	2331	dopr_index(i) = 55
[87]	2332	dopr_unit(i) = 'm2/s3'
[1]	2333	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
	2334
[524]	2335	CASE ( 'wp:dz' )
[1]	2336	dopr_index(i) = 56
[87]	2337	dopr_unit(i) = 'm2/s3'
[106]	2338	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
[1]	2339
[524]	2340	CASE ( 'w"e:dz' )
[1]	2341	dopr_index(i) = 57
[87]	2342	dopr_unit(i) = 'm2/s3'
[1]	2343	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
	2344
[667]	2345
[1]	2346	CASE ( 'u"pt"' )
	2347	dopr_index(i) = 58
[87]	2348	dopr_unit(i) = 'K m/s'
[1]	2349	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
	2350
	2351	CASE ( 'upt' )
	2352	dopr_index(i) = 59
[87]	2353	dopr_unit(i) = 'K m/s'
[1]	2354	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
	2355
	2356	CASE ( 'upt_t' )
	2357	dopr_index(i) = 60
[87]	2358	dopr_unit(i) = 'K m/s'
[1]	2359	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
	2360
	2361	CASE ( 'v"pt"' )
	2362	dopr_index(i) = 61
[87]	2363	dopr_unit(i) = 'K m/s'
[1]	2364	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
	2365
	2366	CASE ( 'vpt' )
	2367	dopr_index(i) = 62
[87]	2368	dopr_unit(i) = 'K m/s'
[1]	2369	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
	2370
	2371	CASE ( 'vpt_t' )
	2372	dopr_index(i) = 63
[87]	2373	dopr_unit(i) = 'K m/s'
[1]	2374	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
	2375
[96]	2376	CASE ( 'rho' )
[388]	2377	IF ( .NOT. ocean ) THEN
	2378	message_string = 'data_output_pr = ' // &
	2379	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2380	'lemented for ocean = .FALSE.'
	2381	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2382	ELSE
	2383	dopr_index(i) = 64
	2384	dopr_unit(i) = 'kg/m3'
	2385	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
	2386	ENDIF
[1]	2387
[96]	2388	CASE ( 'w"sa"' )
	2389	IF ( .NOT. ocean ) THEN
[215]	2390	message_string = 'data_output_pr = ' // &
	2391	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2392	'lemented for ocean = .FALSE.'
[226]	2393	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2394	ELSE
	2395	dopr_index(i) = 65
	2396	dopr_unit(i) = 'psu m/s'
	2397	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
	2398	ENDIF
	2399
	2400	CASE ( 'wsa' )
	2401	IF ( .NOT. ocean ) THEN
[215]	2402	message_string = 'data_output_pr = ' // &
	2403	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2404	'lemented for ocean = .FALSE.'
[226]	2405	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2406	ELSE
	2407	dopr_index(i) = 66
	2408	dopr_unit(i) = 'psu m/s'
	2409	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
	2410	ENDIF
	2411
	2412	CASE ( 'wsa' )
	2413	IF ( .NOT. ocean ) THEN
[215]	2414	message_string = 'data_output_pr = ' // &
	2415	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2416	'lemented for ocean = .FALSE.'
[226]	2417	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
[96]	2418	ELSE
	2419	dopr_index(i) = 67
	2420	dopr_unit(i) = 'psu m/s'
	2421	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
	2422	ENDIF
	2423
[106]	2424	CASE ( 'wp' )
	2425	dopr_index(i) = 68
	2426	dopr_unit(i) = 'm3/s3'
	2427	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
[96]	2428
[106]	2429	CASE ( 'w"e' )
	2430	dopr_index(i) = 69
	2431	dopr_unit(i) = 'm3/s3'
	2432	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
	2433
[197]	2434	CASE ( 'q*2' )
	2435	IF ( .NOT. humidity ) THEN
[215]	2436	message_string = 'data_output_pr = ' // &
	2437	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2438	'lemented for humidity = .FALSE.'
[226]	2439	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
[197]	2440	ELSE
	2441	dopr_index(i) = 70
	2442	dopr_unit(i) = 'kg2/kg2'
	2443	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
	2444	ENDIF
[106]	2445
[388]	2446	CASE ( 'prho' )
	2447	IF ( .NOT. ocean ) THEN
	2448	message_string = 'data_output_pr = ' // &
	2449	TRIM( data_output_pr(i) ) // ' is not imp' // &
	2450	'lemented for ocean = .FALSE.'
	2451	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
	2452	ELSE
	2453	dopr_index(i) = 71
	2454	dopr_unit(i) = 'kg/m3'
	2455	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
	2456	ENDIF
	2457
	2458	CASE ( 'hyp' )
	2459	dopr_index(i) = 72
[531]	2460	dopr_unit(i) = 'dbar'
[388]	2461	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
	2462
[1]	2463	CASE DEFAULT
[87]	2464
	2465	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
	2466
	2467	IF ( unit == 'illegal' ) THEN
[215]	2468	IF ( data_output_pr_user(1) /= ' ' ) THEN
	2469	message_string = 'illegal value for data_output_pr or ' // &
	2470	'data_output_pr_user = "' // &
	2471	TRIM( data_output_pr(i) ) // '"'
[226]	2472	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
[215]	2473	ELSE
	2474	message_string = 'illegal value for data_output_pr = "' // &
	2475	TRIM( data_output_pr(i) ) // '"'
[226]	2476	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
[87]	2477	ENDIF
[1]	2478	ENDIF
	2479
	2480	END SELECT
[667]	2481
[1]	2482	ENDDO
	2483
	2484
	2485	!
	2486	!-- Append user-defined data output variables to the standard data output
	2487	IF ( data_output_user(1) /= ' ' ) THEN
	2488	i = 1
	2489	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2490	i = i + 1
	2491	ENDDO
	2492	j = 1
	2493	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
	2494	IF ( i > 100 ) THEN
[215]	2495	message_string = 'number of output quantitities given by data' // &
	2496	'_output and data_output_user exceeds the limit of 100'
[226]	2497	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
[1]	2498	ENDIF
	2499	data_output(i) = data_output_user(j)
	2500	i = i + 1
	2501	j = j + 1
	2502	ENDDO
	2503	ENDIF
	2504
	2505	!
	2506	!-- Check and set steering parameters for 2d/3d data output and averaging
	2507	i = 1
	2508	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
	2509	!
	2510	!-- Check for data averaging
	2511	ilen = LEN_TRIM( data_output(i) )
	2512	j = 0 ! no data averaging
	2513	IF ( ilen > 3 ) THEN
	2514	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
	2515	j = 1 ! data averaging
	2516	data_output(i) = data_output(i)(1:ilen-3)
	2517	ENDIF
	2518	ENDIF
	2519	!
	2520	!-- Check for cross section or volume data
	2521	ilen = LEN_TRIM( data_output(i) )
	2522	k = 0 ! 3d data
	2523	var = data_output(i)(1:ilen)
	2524	IF ( ilen > 3 ) THEN
	2525	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
	2526	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
	2527	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2528	k = 1 ! 2d data
	2529	var = data_output(i)(1:ilen-3)
	2530	ENDIF
	2531	ENDIF
	2532	!
	2533	!-- Check for allowed value and set units
	2534	SELECT CASE ( TRIM( var ) )
	2535
	2536	CASE ( 'e' )
	2537	IF ( constant_diffusion ) THEN
[215]	2538	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2539	'res constant_diffusion = .FALSE.'
[226]	2540	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
[1]	2541	ENDIF
	2542	unit = 'm2/s2'
	2543
[771]	2544	CASE ( 'lpt' )
	2545	IF ( .NOT. cloud_physics ) THEN
	2546	message_string = 'output of "' // TRIM( var ) // '" requi' // &
[773]	2547	'res cloud_physics = .TRUE.'
	2548	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[771]	2549	ENDIF
	2550	unit = 'K'
	2551
[1]	2552	CASE ( 'pc', 'pr' )
	2553	IF ( .NOT. particle_advection ) THEN
[215]	2554	message_string = 'output of "' // TRIM( var ) // '" requir' // &
	2555	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
[226]	2556	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
[1]	2557	ENDIF
	2558	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	2559	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	2560
	2561	CASE ( 'q', 'vpt' )
[75]	2562	IF ( .NOT. humidity ) THEN
[215]	2563	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2564	'res humidity = .TRUE.'
[226]	2565	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
[1]	2566	ENDIF
	2567	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	2568	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	2569
	2570	CASE ( 'ql' )
	2571	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
[215]	2572	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2573	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
[226]	2574	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
[1]	2575	ENDIF
	2576	unit = 'kg/kg'
	2577
	2578	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	2579	IF ( .NOT. cloud_droplets ) THEN
[215]	2580	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2581	'res cloud_droplets = .TRUE.'
[226]	2582	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
[1]	2583	ENDIF
	2584	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	2585	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	2586	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	2587
	2588	CASE ( 'qv' )
	2589	IF ( .NOT. cloud_physics ) THEN
[215]	2590	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2591	'res cloud_physics = .TRUE.'
[226]	2592	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2593	ENDIF
	2594	unit = 'kg/kg'
	2595
[96]	2596	CASE ( 'rho' )
	2597	IF ( .NOT. ocean ) THEN
[215]	2598	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2599	'res ocean = .TRUE.'
[226]	2600	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2601	ENDIF
	2602	unit = 'kg/m3'
	2603
[1]	2604	CASE ( 's' )
	2605	IF ( .NOT. passive_scalar ) THEN
[215]	2606	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2607	'res passive_scalar = .TRUE.'
[226]	2608	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
[1]	2609	ENDIF
	2610	unit = 'conc'
	2611
[96]	2612	CASE ( 'sa' )
	2613	IF ( .NOT. ocean ) THEN
[215]	2614	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2615	'res ocean = .TRUE.'
[226]	2616	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
[96]	2617	ENDIF
	2618	unit = 'psu'
	2619
[978]	2620	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0', 'z0h*' )
[1]	2621	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
[215]	2622	message_string = 'illegal value for data_output: "' // &
	2623	TRIM( var ) // '" & only 2d-horizontal ' // &
	2624	'cross sections are allowed for this value'
[226]	2625	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
[1]	2626	ENDIF
	2627	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
[215]	2628	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2629	'res cloud_physics = .TRUE.'
[226]	2630	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
[1]	2631	ENDIF
[72]	2632	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
[215]	2633	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2634	'res precipitation = .TRUE.'
[226]	2635	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2636	ENDIF
	2637	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
[215]	2638	message_string = 'temporal averaging of precipitation ' // &
	2639	'amount "' // TRIM( var ) // '" is not possible'
[226]	2640	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
[72]	2641	ENDIF
	2642	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
[215]	2643	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2644	'res precipitation = .TRUE.'
[226]	2645	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
[72]	2646	ENDIF
[354]	2647	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
	2648	message_string = 'output of "' // TRIM( var ) // '" requi' // &
	2649	'res humidity = .TRUE.'
	2650	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
	2651	ENDIF
[72]	2652
[354]	2653	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
	2654	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
	2655	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
	2656	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
	2657	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
	2658	IF ( TRIM( var ) == 't*' ) unit = 'K'
	2659	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
	2660	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
[996]	2661	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
[72]	2662
[1]	2663
	2664	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	2665	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	2666	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	2667	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	2668	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	2669	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	2670	CONTINUE
	2671
	2672	CASE DEFAULT
	2673	CALL user_check_data_output( var, unit )
	2674
	2675	IF ( unit == 'illegal' ) THEN
[215]	2676	IF ( data_output_user(1) /= ' ' ) THEN
	2677	message_string = 'illegal value for data_output or ' // &
	2678	'data_output_user = "' // TRIM( data_output(i) ) // '"'
[226]	2679	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
[215]	2680	ELSE
	2681	message_string = 'illegal value for data_output =' // &
	2682	TRIM( data_output(i) ) // '"'
[226]	2683	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
[1]	2684	ENDIF
	2685	ENDIF
	2686
	2687	END SELECT
	2688	!
	2689	!-- Set the internal steering parameters appropriately
	2690	IF ( k == 0 ) THEN
	2691	do3d_no(j) = do3d_no(j) + 1
	2692	do3d(j,do3d_no(j)) = data_output(i)
	2693	do3d_unit(j,do3d_no(j)) = unit
	2694	ELSE
	2695	do2d_no(j) = do2d_no(j) + 1
	2696	do2d(j,do2d_no(j)) = data_output(i)
	2697	do2d_unit(j,do2d_no(j)) = unit
	2698	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
	2699	data_output_xy(j) = .TRUE.
	2700	ENDIF
	2701	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
	2702	data_output_xz(j) = .TRUE.
	2703	ENDIF
	2704	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
	2705	data_output_yz(j) = .TRUE.
	2706	ENDIF
	2707	ENDIF
	2708
	2709	IF ( j == 1 ) THEN
	2710	!
	2711	!-- Check, if variable is already subject to averaging
	2712	found = .FALSE.
	2713	DO k = 1, doav_n
	2714	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	2715	ENDDO
	2716
	2717	IF ( .NOT. found ) THEN
	2718	doav_n = doav_n + 1
	2719	doav(doav_n) = var
	2720	ENDIF
	2721	ENDIF
	2722
	2723	i = i + 1
	2724	ENDDO
	2725
	2726	!
[376]	2727	!-- Averaged 2d or 3d output requires that an averaging interval has been set
	2728	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
	2729	WRITE( message_string, * ) 'output of averaged quantity "', &
	2730	TRIM( doav(1) ), '_av" requires to set a ', &
	2731	'non-zero & averaging interval'
	2732	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
	2733	ENDIF
	2734
	2735	!
[308]	2736	!-- Check sectional planes and store them in one shared array
	2737	IF ( ANY( section_xy > nz + 1 ) ) THEN
	2738	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
	2739	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
	2740	ENDIF
	2741	IF ( ANY( section_xz > ny + 1 ) ) THEN
	2742	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
	2743	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
	2744	ENDIF
	2745	IF ( ANY( section_yz > nx + 1 ) ) THEN
	2746	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
	2747	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
	2748	ENDIF
[1]	2749	section(:,1) = section_xy
	2750	section(:,2) = section_xz
	2751	section(:,3) = section_yz
	2752
	2753	!
	2754	!-- Upper plot limit for 2D vertical sections
	2755	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
	2756	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
[215]	2757	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
	2758	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
	2759	' (zu(nzt))'
[226]	2760	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
[1]	2761	ENDIF
	2762
	2763	!
	2764	!-- Upper plot limit for 3D arrays
	2765	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
	2766
	2767	!
	2768	!-- Determine and check accuracy for compressed 3D plot output
	2769	IF ( do3d_compress ) THEN
	2770	!
	2771	!-- Compression only permissible on T3E machines
	2772	IF ( host(1:3) /= 't3e' ) THEN
[215]	2773	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
	2774	TRIM( host ) // '"'
[226]	2775	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
[1]	2776	ENDIF
	2777
	2778	i = 1
	2779	DO WHILE ( do3d_comp_prec(i) /= ' ' )
	2780
	2781	ilen = LEN_TRIM( do3d_comp_prec(i) )
	2782	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
	2783	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
[215]	2784	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
	2785	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
[226]	2786	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
[1]	2787	ENDIF
	2788
	2789	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
	2790	var = do3d_comp_prec(i)(1:ilen-1)
	2791
	2792	SELECT CASE ( var )
	2793
	2794	CASE ( 'u' )
	2795	j = 1
	2796	CASE ( 'v' )
	2797	j = 2
	2798	CASE ( 'w' )
	2799	j = 3
	2800	CASE ( 'p' )
	2801	j = 4
	2802	CASE ( 'pt' )
	2803	j = 5
	2804
	2805	CASE DEFAULT
[215]	2806	WRITE( message_string, * ) 'unknown variable "', &
	2807	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
	2808	i, ')'
[226]	2809	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
[1]	2810
	2811	END SELECT
	2812
	2813	plot_3d_precision(j)%precision = prec
	2814	i = i + 1
	2815
	2816	ENDDO
	2817	ENDIF
	2818
	2819	!
	2820	!-- Check the data output format(s)
	2821	IF ( data_output_format(1) == ' ' ) THEN
	2822	!
	2823	!-- Default value
	2824	netcdf_output = .TRUE.
	2825	ELSE
	2826	i = 1
	2827	DO WHILE ( data_output_format(i) /= ' ' )
	2828
	2829	SELECT CASE ( data_output_format(i) )
	2830
	2831	CASE ( 'netcdf' )
	2832	netcdf_output = .TRUE.
	2833	CASE ( 'iso2d' )
	2834	iso2d_output = .TRUE.
	2835	CASE ( 'avs' )
	2836	avs_output = .TRUE.
	2837
	2838	CASE DEFAULT
[215]	2839	message_string = 'unknown value for data_output_format "' // &
	2840	TRIM( data_output_format(i) ) // '"'
[226]	2841	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
[1]	2842
	2843	END SELECT
	2844
	2845	i = i + 1
	2846	IF ( i > 10 ) EXIT
	2847
	2848	ENDDO
	2849
	2850	ENDIF
	2851
	2852	!
[410]	2853	!-- Check mask conditions
[553]	2854	DO mid = 1, max_masks
[567]	2855	IF ( data_output_masks(mid,1) /= ' ' .OR. &
	2856	data_output_masks_user(mid,1) /= ' ' ) THEN
[553]	2857	masks = masks + 1
	2858	ENDIF
	2859	ENDDO
	2860
[410]	2861	IF ( masks < 0 .OR. masks > max_masks ) THEN
	2862	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
	2863	'<= ', max_masks, ' (=max_masks)'
[564]	2864	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
[410]	2865	ENDIF
	2866	IF ( masks > 0 ) THEN
	2867	mask_scale(1) = mask_scale_x
	2868	mask_scale(2) = mask_scale_y
	2869	mask_scale(3) = mask_scale_z
	2870	IF ( ANY( mask_scale <= 0.0 ) ) THEN
	2871	WRITE( message_string, * ) &
	2872	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
	2873	'must be > 0.0'
[564]	2874	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
[410]	2875	ENDIF
	2876	!
	2877	!-- Generate masks for masked data output
	2878	CALL init_masks
	2879	ENDIF
	2880
	2881	!
[493]	2882	!-- Check the NetCDF data format
[924]	2883	#if ! defined ( __check )
[493]	2884	IF ( netcdf_data_format > 2 ) THEN
[924]	2885	#if defined( __netcdf4 )
[493]	2886	CONTINUE
	2887	#else
	2888	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
	2889	'cpp-directive __netcdf4 given & switch ' // &
	2890	'back to 64-bit offset format'
	2891	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
	2892	netcdf_data_format = 2
	2893	#endif
	2894	ENDIF
[892]	2895	#endif
[493]	2896	!
[667]	2897
[809]	2898	#if ! defined( __check )
[1]	2899	!-- Check netcdf precison
	2900	ldum = .FALSE.
	2901	CALL define_netcdf_header( 'ch', ldum, 0 )
[807]	2902	#endif
[1]	2903	!
	2904	!-- Check, whether a constant diffusion coefficient shall be used
	2905	IF ( km_constant /= -1.0 ) THEN
	2906	IF ( km_constant < 0.0 ) THEN
[215]	2907	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
[226]	2908	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
[1]	2909	ELSE
	2910	IF ( prandtl_number < 0.0 ) THEN
[215]	2911	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
	2912	' < 0.0'
[226]	2913	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
[1]	2914	ENDIF
	2915	constant_diffusion = .TRUE.
	2916
	2917	IF ( prandtl_layer ) THEN
[215]	2918	message_string = 'prandtl_layer is not allowed with fixed ' // &
	2919	'value of km'
[226]	2920	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
[1]	2921	ENDIF
	2922	ENDIF
	2923	ENDIF
	2924
	2925	!
[978]	2926	!-- In case of non-cyclic lateral boundaries and a damping layer for the
	2927	!-- potential temperature, check the width of the damping layer
[1]	2928	IF ( bc_lr /= 'cyclic' ) THEN
[996]	2929	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( nx * dx ) ) THEN
[978]	2930	message_string = 'pt_damping_width out of range'
[226]	2931	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2932	ENDIF
	2933	ENDIF
	2934
	2935	IF ( bc_ns /= 'cyclic' ) THEN
[996]	2936	IF ( pt_damping_width < 0.0 .OR. pt_damping_width > REAL( ny * dy ) ) THEN
[978]	2937	message_string = 'pt_damping_width out of range'
[226]	2938	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
[1]	2939	ENDIF
	2940	ENDIF
	2941
	2942	!
	2943	!-- Check value range for rif
	2944	IF ( rif_min >= rif_max ) THEN
[215]	2945	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
	2946	'than rif_max = ', rif_max
[226]	2947	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
[1]	2948	ENDIF
	2949
	2950	!
	2951	!-- Determine upper and lower hight level indices for random perturbations
[97]	2952	IF ( disturbance_level_b == -9999999.9 ) THEN
	2953	IF ( ocean ) THEN
	2954	disturbance_level_b = zu((nzt*2)/3)
	2955	disturbance_level_ind_b = ( nzt * 2 ) / 3
	2956	ELSE
	2957	disturbance_level_b = zu(nzb+3)
	2958	disturbance_level_ind_b = nzb + 3
	2959	ENDIF
[1]	2960	ELSEIF ( disturbance_level_b < zu(3) ) THEN
[215]	2961	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2962	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
[226]	2963	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
[1]	2964	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
[215]	2965	WRITE( message_string, * ) 'disturbance_level_b = ', &
	2966	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2967	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
[1]	2968	ELSE
	2969	DO k = 3, nzt-2
	2970	IF ( disturbance_level_b <= zu(k) ) THEN
	2971	disturbance_level_ind_b = k
	2972	EXIT
	2973	ENDIF
	2974	ENDDO
	2975	ENDIF
	2976
[97]	2977	IF ( disturbance_level_t == -9999999.9 ) THEN
	2978	IF ( ocean ) THEN
	2979	disturbance_level_t = zu(nzt-3)
	2980	disturbance_level_ind_t = nzt - 3
	2981	ELSE
	2982	disturbance_level_t = zu(nzt/3)
	2983	disturbance_level_ind_t = nzt / 3
	2984	ENDIF
[1]	2985	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
[215]	2986	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2987	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
[226]	2988	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
[1]	2989	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
[215]	2990	WRITE( message_string, * ) 'disturbance_level_t = ', &
	2991	disturbance_level_t, ' must be >= disturbance_level_b = ', &
	2992	disturbance_level_b
[226]	2993	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
[1]	2994	ELSE
	2995	DO k = 3, nzt-2
	2996	IF ( disturbance_level_t <= zu(k) ) THEN
	2997	disturbance_level_ind_t = k
	2998	EXIT
	2999	ENDIF
	3000	ENDDO
	3001	ENDIF
	3002
	3003	!
	3004	!-- Check again whether the levels determined this way are ok.
	3005	!-- Error may occur at automatic determination and too few grid points in
	3006	!-- z-direction.
	3007	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
[215]	3008	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
	3009	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
	3010	disturbance_level_b
[226]	3011	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
[1]	3012	ENDIF
	3013
	3014	!
	3015	!-- Determine the horizontal index range for random perturbations.
	3016	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
	3017	!-- near the inflow and the perturbation area is further limited to ...(1)
	3018	!-- after the initial phase of the flow.
	3019	dist_nxl = 0; dist_nxr = nx
	3020	dist_nys = 0; dist_nyn = ny
	3021	IF ( bc_lr /= 'cyclic' ) THEN
	3022	IF ( inflow_disturbance_begin == -1 ) THEN
	3023	inflow_disturbance_begin = MIN( 10, nx/2 )
	3024	ENDIF
	3025	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
	3026	THEN
[215]	3027	message_string = 'inflow_disturbance_begin out of range'
[226]	3028	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3029	ENDIF
	3030	IF ( inflow_disturbance_end == -1 ) THEN
	3031	inflow_disturbance_end = MIN( 100, 3*nx/4 )
	3032	ENDIF
	3033	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
	3034	THEN
[215]	3035	message_string = 'inflow_disturbance_end out of range'
[226]	3036	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3037	ENDIF
	3038	ELSEIF ( bc_ns /= 'cyclic' ) THEN
	3039	IF ( inflow_disturbance_begin == -1 ) THEN
	3040	inflow_disturbance_begin = MIN( 10, ny/2 )
	3041	ENDIF
	3042	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
	3043	THEN
[215]	3044	message_string = 'inflow_disturbance_begin out of range'
[226]	3045	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
[1]	3046	ENDIF
	3047	IF ( inflow_disturbance_end == -1 ) THEN
	3048	inflow_disturbance_end = MIN( 100, 3*ny/4 )
	3049	ENDIF
	3050	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
	3051	THEN
[215]	3052	message_string = 'inflow_disturbance_end out of range'
[226]	3053	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
[1]	3054	ENDIF
	3055	ENDIF
	3056
[978]	3057	IF ( bc_lr == 'radiation/dirichlet' .OR. bc_lr == 'neumann/dirichlet' ) THEN
[1]	3058	dist_nxr = nx - inflow_disturbance_begin
	3059	dist_nxl(1) = nx - inflow_disturbance_end
[978]	3060	ELSEIF ( bc_lr == 'dirichlet/radiation' .OR. bc_lr == 'dirichlet/neumann' ) THEN
[1]	3061	dist_nxl = inflow_disturbance_begin
	3062	dist_nxr(1) = inflow_disturbance_end
[73]	3063	ENDIF
[978]	3064	IF ( bc_ns == 'dirichlet/radiation' .OR. bc_ns == 'dirichlet/neumann' ) THEN
[1]	3065	dist_nyn = ny - inflow_disturbance_begin
	3066	dist_nys(1) = ny - inflow_disturbance_end
[978]	3067	ELSEIF ( bc_ns == 'radiation/dirichlet' .OR. bc_ns == 'neumann/dirichlet' ) THEN
[1]	3068	dist_nys = inflow_disturbance_begin
	3069	dist_nyn(1) = inflow_disturbance_end
	3070	ENDIF
	3071
	3072	!
[151]	3073	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
	3074	!-- boundary (so far, a turbulent inflow is realized from the left side only)
[978]	3075	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' .AND. bc_lr /= 'dirichlet/neumann' ) THEN
[215]	3076	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
	3077	'condition at the inflow boundary'
[226]	3078	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
[151]	3079	ENDIF
	3080
	3081	!
	3082	!-- In case of turbulent inflow calculate the index of the recycling plane
	3083	IF ( turbulent_inflow ) THEN
	3084	IF ( recycling_width == 9999999.9 ) THEN
	3085	!
	3086	!-- Set the default value for the width of the recycling domain
	3087	recycling_width = 0.1 * nx * dx
	3088	ELSE
	3089	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
[215]	3090	WRITE( message_string, * ) 'illegal value for recycling_width:', &
	3091	' ', recycling_width
[226]	3092	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
[151]	3093	ENDIF
	3094	ENDIF
	3095	!
	3096	!-- Calculate the index
	3097	recycling_plane = recycling_width / dx
	3098	ENDIF
	3099
	3100	!
[1]	3101	!-- Check random generator
	3102	IF ( random_generator /= 'system-specific' .AND. &
	3103	random_generator /= 'numerical-recipes' ) THEN
[215]	3104	message_string = 'unknown random generator: random_generator = "' // &
	3105	TRIM( random_generator ) // '"'
[226]	3106	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
[1]	3107	ENDIF
	3108
	3109	!
	3110	!-- Determine damping level index for 1D model
	3111	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	3112	IF ( damp_level_1d == -1.0 ) THEN
	3113	damp_level_1d = zu(nzt+1)
	3114	damp_level_ind_1d = nzt + 1
	3115	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
[215]	3116	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
	3117	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
[226]	3118	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
[1]	3119	ELSE
	3120	DO k = 1, nzt+1
	3121	IF ( damp_level_1d <= zu(k) ) THEN
	3122	damp_level_ind_1d = k
	3123	EXIT
	3124	ENDIF
	3125	ENDDO
	3126	ENDIF
	3127	ENDIF
[215]	3128
[1]	3129	!
	3130	!-- Check some other 1d-model parameters
	3131	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
	3132	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
[215]	3133	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
	3134	'" is unknown'
[226]	3135	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
[1]	3136	ENDIF
	3137	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
	3138	TRIM( dissipation_1d ) /= 'detering' ) THEN
[215]	3139	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
	3140	'" is unknown'
[226]	3141	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
[1]	3142	ENDIF
	3143
	3144	!
	3145	!-- Set time for the next user defined restart (time_restart is the
	3146	!-- internal parameter for steering restart events)
	3147	IF ( restart_time /= 9999999.9 ) THEN
[291]	3148	IF ( restart_time > time_since_reference_point ) THEN
	3149	time_restart = restart_time
	3150	ENDIF
[1]	3151	ELSE
	3152	!
	3153	!-- In case of a restart run, set internal parameter to default (no restart)
	3154	!-- if the NAMELIST-parameter restart_time is omitted
	3155	time_restart = 9999999.9
	3156	ENDIF
	3157
	3158	!
	3159	!-- Set default value of the time needed to terminate a model run
	3160	IF ( termination_time_needed == -1.0 ) THEN
	3161	IF ( host(1:3) == 'ibm' ) THEN
	3162	termination_time_needed = 300.0
	3163	ELSE
	3164	termination_time_needed = 35.0
	3165	ENDIF
	3166	ENDIF
	3167
	3168	!
	3169	!-- Check the time needed to terminate a model run
	3170	IF ( host(1:3) == 't3e' ) THEN
	3171	!
	3172	!-- Time needed must be at least 30 seconds on all CRAY machines, because
	3173	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
	3174	IF ( termination_time_needed <= 30.0 ) THEN
[215]	3175	WRITE( message_string, * ) 'termination_time_needed = ', &
	3176	termination_time_needed, ' must be > 30.0 on host "', &
	3177	TRIM( host ), '"'
[226]	3178	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
[1]	3179	ENDIF
	3180	ELSEIF ( host(1:3) == 'ibm' ) THEN
	3181	!
	3182	!-- On IBM-regatta machines the time should be at least 300 seconds,
	3183	!-- because the job time consumed before executing palm (for compiling,
	3184	!-- copying of files, etc.) has to be regarded
	3185	IF ( termination_time_needed < 300.0 ) THEN
[215]	3186	WRITE( message_string, * ) 'termination_time_needed = ', &
	3187	termination_time_needed, ' should be >= 300.0 on host "', &
	3188	TRIM( host ), '"'
[226]	3189	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
[1]	3190	ENDIF
	3191	ENDIF
	3192
[217]	3193	!
[240]	3194	!-- Check pressure gradient conditions
	3195	IF ( dp_external .AND. conserve_volume_flow ) THEN
[388]	3196	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
	3197	'w are .TRUE. but one of them must be .FALSE.'
[240]	3198	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
	3199	ENDIF
	3200	IF ( dp_external ) THEN
	3201	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
	3202	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
	3203	' of range'
	3204	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
	3205	ENDIF
	3206	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
[388]	3207	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
	3208	'ro, i.e. the external pressure gradient & will not be applied'
[240]	3209	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
	3210	ENDIF
	3211	ENDIF
	3212	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
	3213	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
	3214	'.FALSE., i.e. the external pressure gradient & will not be applied'
	3215	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
	3216	ENDIF
[241]	3217	IF ( conserve_volume_flow ) THEN
	3218	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
[667]	3219
	3220	conserve_volume_flow_mode = 'initial_profiles'
	3221
[241]	3222	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
	3223	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
	3224	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
	3225	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
	3226	conserve_volume_flow_mode
	3227	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
	3228	ENDIF
[667]	3229	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
	3230	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	3231	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
	3232	'require conserve_volume_flow_mode = ''initial_profiles'''
[241]	3233	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
	3234	ENDIF
	3235	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
	3236	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
	3237	WRITE( message_string, * ) 'cyclic boundary conditions ', &
[667]	3238	'require conserve_volume_flow_mode = ''initial_profiles''', &
[241]	3239	' or ''bulk_velocity'''
	3240	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
	3241	ENDIF
	3242	ENDIF
	3243	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
	3244	( .NOT. conserve_volume_flow .OR. &
	3245	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
	3246	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
[667]	3247	'conserve_volume_flow = .T. and ', &
[241]	3248	'conserve_volume_flow_mode = ''bulk_velocity'''
	3249	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
	3250	ENDIF
[240]	3251
	3252	!
[264]	3253	!-- Check particle attributes
	3254	IF ( particle_color /= 'none' ) THEN
	3255	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
	3256	particle_color /= 'z' ) THEN
	3257	message_string = 'illegal value for parameter particle_color: ' // &
	3258	TRIM( particle_color)
	3259	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
	3260	ELSE
	3261	IF ( color_interval(2) <= color_interval(1) ) THEN
	3262	message_string = 'color_interval(2) <= color_interval(1)'
	3263	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
	3264	ENDIF
	3265	ENDIF
	3266	ENDIF
	3267
	3268	IF ( particle_dvrpsize /= 'none' ) THEN
	3269	IF ( particle_dvrpsize /= 'absw' ) THEN
	3270	message_string = 'illegal value for parameter particle_dvrpsize:' // &
	3271	' ' // TRIM( particle_color)
	3272	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
	3273	ELSE
	3274	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
	3275	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
	3276	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
	3277	ENDIF
	3278	ENDIF
	3279	ENDIF
	3280
	3281	!
[217]	3282	!-- Check &userpar parameters
	3283	CALL user_check_parameters
[1]	3284
[217]	3285
[667]	3286
[1]	3287	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |