Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 947

Last change on this file since 947 was 887, checked in by raasch, 13 years ago
test: unit 14 (BINOUT) is opened without APPEND feature)
Property svn:keywords set to `Id`
File size: 56.9 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! Test: append feature removed from unit 14
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_open.f90 887 2012-04-20 14:47:14Z maronga $
11	!
12	! 849 2012-03-15 10:35:09Z raasch
13	! comment changed
14	!
15	! 809 2012-01-30 13:32:58Z maronga
16	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
17	!
18	! 807 2012-01-25 11:53:51Z maronga
19	! New cpp directive "__check" implemented which is used by check_namelist_files
20	!
21	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
22	!
23	! 667 2010-12-23 12:06:00Z suehring/gryschka
24	! Output of total array size was adapted to nbgp.
25	!
26	! 600 2010-11-24 16:10:51Z raasch
27	! bugfix in opening of cross section netcdf-files (parallel opening with
28	! netcdf4 only works for netcdf_data_format > 2)
29	!
30	! 564 2010-09-30 13:18:59Z helmke
31	! start number of mask output files changed to 201, netcdf message identifiers
32	! of masked output changed
33	!
34	! 519 2010-03-19 05:30:02Z raasch
35	! NetCDF4 support for particle data
36	!
37	! 493 2010-03-01 08:30:24Z raasch
38	! NetCDF4 support (parallel output)
39	!
40	! 410 2009-12-04 17:05:40Z letzel
41	! masked data output
42	!
43	! 277 2009-03-31 09:13:47Z heinze
44	! Output of NetCDF messages with aid of message handling routine.
45	! Output of messages replaced by message handling routine
46	!
47	! 146 2008-01-17 13:08:34Z raasch
48	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
49	! because only this file contains the global variables,
50	! myid_char_14 removed
51	!
52	! 120 2007-10-17 11:54:43Z raasch
53	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
54	!
55	! 105 2007-08-08 07:12:55Z raasch
56	! Different filenames are used in case of a coupled simulation,
57	! coupling_char added to all relevant filenames
58	!
59	! 82 2007-04-16 15:40:52Z raasch
60	! Call of local_getenv removed, preprocessor directives for old systems removed
61	!
62	! 46 2007-03-05 06:00:47Z raasch
63	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
64	!
65	! RCS Log replace by Id keyword, revision history cleaned up
66	!
67	! Revision 1.44 2006/08/22 13:48:34 raasch
68	! xz and yz cross sections now up to nzt+1
69	!
70	! Revision 1.1 1997/08/11 06:10:55 raasch
71	! Initial revision
72	!
73	!
74	! Description:
75	! ------------
76	! Check if file unit is open. If not, open file and, if necessary, write a
77	! header or start other initializing actions, respectively.
78	!------------------------------------------------------------------------------!
79
80	USE array_kind
81	USE arrays_3d
82	USE control_parameters
83	USE grid_variables
84	USE indices
85	USE netcdf_control
86	USE particle_attributes
87	USE pegrid
88	USE profil_parameter
89	USE statistics
90
91	IMPLICIT NONE
92
93	CHARACTER (LEN=2) :: mask_char, suffix
94	CHARACTER (LEN=20) :: xtext = 'time in s'
95	CHARACTER (LEN=30) :: filename
96	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
97	avs_data_file_localname
98	CHARACTER (LEN=80) :: rtext
99	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
100	batch_scp, zeile
101	CHARACTER (LEN=400) :: command
102
103	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
104	j, k, legpos = 1, timodex = 1
105	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
106
107	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
108	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
109	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
110
111	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
112	sizex = 250.0, sizey = 40.0, texfac = 1.5
113
114	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
115	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
116
117
118	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
119	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
120	rand, rlegfak, sizex, sizey, texfac, &
121	timodex, twoxa, twoya, xtext
122
123
124	!
125	!-- Immediate return if file already open
126	IF ( openfile(file_id)%opened ) RETURN
127
128	#if ! defined ( __check )
129	!
130	!-- Only certain files are allowed to be re-opened
131	!-- NOTE: some of the other files perhaps also could be re-opened, but it
132	!-- has not been checked so far, if it works!
133	IF ( openfile(file_id)%opened_before ) THEN
134	SELECT CASE ( file_id )
135	CASE ( 13, 14, 21, 22, 23, 80:85 )
136	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
137	message_string = 're-open of unit ' // &
138	'14 is not verified. Please check results!'
139	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
140	ENDIF
141
142	CASE DEFAULT
143	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
144	' is not allowed'
145	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
146
147	RETURN
148
149	END SELECT
150	ENDIF
151	#endif
152
153	!
154	!-- Check if file may be opened on the relevant PE
155	SELECT CASE ( file_id )
156
157	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
158
159	IF ( myid /= 0 ) THEN
160	WRITE( message_string, * ) 'opening file-id ',file_id, &
161	' not allowed for PE ',myid
162	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
163	ENDIF
164
165	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
166
167	IF ( netcdf_data_format < 3 ) THEN
168
169	IF ( myid /= 0 ) THEN
170	WRITE( message_string, * ) 'opening file-id ',file_id, &
171	' not allowed for PE ',myid
172	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
173	ENDIF
174
175	ENDIF
176
177	CASE ( 21, 22, 23 )
178
179	IF ( .NOT. data_output_2d_on_each_pe ) THEN
180	IF ( myid /= 0 ) THEN
181	WRITE( message_string, * ) 'opening file-id ',file_id, &
182	' not allowed for PE ',myid
183	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
184	END IF
185	ENDIF
186
187	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
188
189	!
190	!-- File-ids that are used temporarily in other routines
191	WRITE( message_string, * ) 'opening file-id ',file_id, &
192	' is not allowed since it is used otherwise'
193	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
194
195	END SELECT
196
197	!
198	!-- Open relevant files
199	SELECT CASE ( file_id )
200
201	CASE ( 11 )
202
203	#if defined ( __check )
204	!
205	!-- In case of a prior parameter file check, the p3d data is stored in
206	!-- PARIN, while the p3df is stored in PARINF. This only applies to
207	!-- check_namelist_files!
208	IF ( check_restart == 2 ) THEN
209	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
210	STATUS='OLD' )
211	ELSE
212	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
213	STATUS='OLD' )
214	END IF
215	#else
216
217	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
218	STATUS='OLD' )
219	#endif
220
221	CASE ( 13 )
222
223	IF ( myid_char == '' ) THEN
224	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
225	FORM='UNFORMATTED', STATUS='OLD' )
226	ELSE
227	!
228	!-- First opening of unit 13 openes file _0000 on all PEs because only
229	!-- this file contains the global variables
230	IF ( .NOT. openfile(file_id)%opened_before ) THEN
231	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
232	FORM='UNFORMATTED', STATUS='OLD' )
233	ELSE
234	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
235	FORM='UNFORMATTED', STATUS='OLD' )
236	ENDIF
237	ENDIF
238
239	CASE ( 14 )
240
241	IF ( myid_char == '' ) THEN
242	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
243	FORM='UNFORMATTED', POSITION='APPEND' )
244	ELSE
245	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
246	CALL local_system( 'mkdir BINOUT' // coupling_char )
247	ENDIF
248	#if defined( __parallel ) && ! defined ( __check )
249	!
250	!-- Set a barrier in order to allow that all other processors in the
251	!-- directory created by PE0 can open their file
252	CALL MPI_BARRIER( comm2d, ierr )
253	#endif
254	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
255	FORM='UNFORMATTED' )
256	ENDIF
257
258	CASE ( 15 )
259
260	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
261
262	CASE ( 16 )
263
264	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
265
266	CASE ( 17 )
267
268	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
269
270	CASE ( 18 )
271
272	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
273
274	CASE ( 19 )
275
276	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
277
278	CASE ( 20 )
279
280	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
281	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
282	ENDIF
283	IF ( myid_char == '' ) THEN
284	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
285	FORM='UNFORMATTED', POSITION='APPEND' )
286	ELSE
287	#if defined( __parallel ) && ! defined ( __check )
288	!
289	!-- Set a barrier in order to allow that all other processors in the
290	!-- directory created by PE0 can open their file
291	CALL MPI_BARRIER( comm2d, ierr )
292	#endif
293	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
294	FORM='UNFORMATTED', POSITION='APPEND' )
295	ENDIF
296
297	CASE ( 21 )
298
299	IF ( data_output_2d_on_each_pe ) THEN
300	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
301	FORM='UNFORMATTED', POSITION='APPEND' )
302	ELSE
303	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
304	FORM='UNFORMATTED', POSITION='APPEND' )
305	ENDIF
306
307	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
308	!
309	!-- Output for combine_plot_fields
310	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
311	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
312	WRITE (21) 0, nx+1, 0, ny+1 ! output part
313	ENDIF
314	!
315	!-- Determine and write ISO2D coordiante header
316	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
317	hu = 0.0
318	ho = (ny+1) * dy
319	DO i = 1, ny
320	eta(i) = REAL( i ) / ( ny + 1.0 )
321	ENDDO
322	eta(0) = 0.0
323	eta(ny+1) = 1.0
324
325	WRITE (21) dx,eta,hu,ho
326	DEALLOCATE( eta, ho, hu )
327
328	!
329	!-- Create output file for local parameters
330	IF ( iso2d_output ) THEN
331	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
332	FORM='FORMATTED', DELIM='APOSTROPHE' )
333	openfile(27)%opened = .TRUE.
334	ENDIF
335
336	ENDIF
337
338	CASE ( 22 )
339
340	IF ( data_output_2d_on_each_pe ) THEN
341	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
342	FORM='UNFORMATTED', POSITION='APPEND' )
343	ELSE
344	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
345	POSITION='APPEND' )
346	ENDIF
347
348	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
349	!
350	!-- Output for combine_plot_fields
351	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
352	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
353	WRITE (22) 0, nx+1, 0, nz+1 ! output part
354	ENDIF
355	!
356	!-- Determine and write ISO2D coordiante header
357	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
358	hu = 0.0
359	ho = zu(nz+1)
360	DO i = 1, nz
361	eta(i) = REAL( zu(i) ) / zu(nz+1)
362	ENDDO
363	eta(0) = 0.0
364	eta(nz+1) = 1.0
365
366	WRITE (22) dx,eta,hu,ho
367	DEALLOCATE( eta, ho, hu )
368	!
369	!-- Create output file for local parameters
370	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
371	FORM='FORMATTED', DELIM='APOSTROPHE' )
372	openfile(28)%opened = .TRUE.
373
374	ENDIF
375
376	CASE ( 23 )
377
378	IF ( data_output_2d_on_each_pe ) THEN
379	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
380	FORM='UNFORMATTED', POSITION='APPEND' )
381	ELSE
382	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
383	POSITION='APPEND' )
384	ENDIF
385
386	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
387	!
388	!-- Output for combine_plot_fields
389	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
390	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
391	WRITE (23) 0, ny+1, 0, nz+1 ! output part
392	ENDIF
393	!
394	!-- Determine and write ISO2D coordiante header
395	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
396	hu = 0.0
397	ho = zu(nz+1)
398	DO i = 1, nz
399	eta(i) = REAL( zu(i) ) / zu(nz+1)
400	ENDDO
401	eta(0) = 0.0
402	eta(nz+1) = 1.0
403
404	WRITE (23) dx,eta,hu,ho
405	DEALLOCATE( eta, ho, hu )
406	!
407	!-- Create output file for local parameters
408	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
409	FORM='FORMATTED', DELIM='APOSTROPHE' )
410	openfile(29)%opened = .TRUE.
411
412	ENDIF
413
414	CASE ( 30 )
415
416	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
417	FORM='UNFORMATTED' )
418	!
419	!-- Write coordinate file for AVS
420	IF ( myid == 0 ) THEN
421	#if defined( __parallel )
422	!
423	!-- Specifications for combine_plot_fields
424	IF ( .NOT. do3d_compress ) THEN
425	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
426	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
427	ENDIF
428	#endif
429	!
430	!-- Write coordinate file for AVS:
431	!-- First determine file names (including cyle numbers) of AVS files on
432	!-- target machine (to which the files are to be transferred).
433	!-- Therefore path information has to be obtained first.
434	IF ( avs_output ) THEN
435	iaddres = LEN_TRIM( return_addres )
436	iusern = LEN_TRIM( return_username )
437
438	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
439	DO WHILE ( .NOT. avs_coor_file_found .OR. &
440	.NOT. avs_data_file_found )
441
442	READ ( 3, '(A)', END=1 ) zeile
443
444	SELECT CASE ( zeile(1:11) )
445
446	CASE ( 'PLOT3D_COOR' )
447	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
448	avs_coor_file_localname
449	avs_coor_file_found = .TRUE.
450
451	CASE ( 'PLOT3D_DATA' )
452	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
453	avs_data_file_localname
454	avs_data_file_found = .TRUE.
455
456	CASE DEFAULT
457	READ ( 3, '(A/A)' ) zeile, zeile
458
459	END SELECT
460
461	ENDDO
462	!
463	!-- Now the cycle numbers on the remote machine must be obtained
464	!-- using batch_scp
465	1 CLOSE ( 3 )
466	IF ( .NOT. avs_coor_file_found .OR. &
467	.NOT. avs_data_file_found ) THEN
468	message_string= 'no filename for AVS-data-file ' // &
469	'found in MRUN-config-file' // &
470	' &filename in FLD-file set to "unknown"'
471	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
472
473	avs_coor_file = 'unknown'
474	avs_data_file = 'unknown'
475	ELSE
476	get_filenames = .TRUE.
477	IF ( TRIM( host ) == 'hpmuk' .OR. &
478	TRIM( host ) == 'lcmuk' ) THEN
479	batch_scp = '/home/raasch/pub/batch_scp'
480	ELSEIF ( TRIM( host ) == 'nech' ) THEN
481	batch_scp = '/ipf/b/b323011/pub/batch_scp'
482	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
483	TRIM( host ) == 'ibmb' ) THEN
484	batch_scp = '/home/h/niksiraa/pub/batch_scp'
485	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
486	batch_scp = '/home/nhbksira/pub/batch_scp'
487	ELSE
488	message_string= 'no path for batch_scp on host "' // &
489	TRIM( host ) // '"'
490	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
491	get_filenames = .FALSE.
492	ENDIF
493
494	IF ( get_filenames ) THEN
495	!
496	!-- Determine the coordinate file name.
497	!-- /etc/passwd serves as Dummy-Datei, because it is not
498	!-- really transferred.
499	command = TRIM( batch_scp ) // ' -n -u ' // &
500	return_username(1:iusern) // ' ' // &
501	return_addres(1:iaddres) // ' /etc/passwd "' // &
502	TRIM( avs_coor_file_catalog ) // '" ' // &
503	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
504
505	CALL local_system( command )
506	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
507	READ ( 3, '(A)' ) avs_coor_file
508	CLOSE ( 3 )
509	!
510	!-- Determine the data file name
511	command = TRIM( batch_scp ) // ' -n -u ' // &
512	return_username(1:iusern) // ' ' // &
513	return_addres(1:iaddres) // ' /etc/passwd "' // &
514	TRIM( avs_data_file_catalog ) // '" ' // &
515	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
516
517	CALL local_system( command )
518	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
519	READ ( 3, '(A)' ) avs_data_file
520	CLOSE ( 3 )
521
522	ELSE
523
524	avs_coor_file = 'unknown'
525	avs_data_file = 'unknown'
526
527	ENDIF
528
529	ENDIF
530
531	!
532	!-- Output of the coordinate file description for FLD-file
533	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
534	openfile(33)%opened = .TRUE.
535	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
536	TRIM( avs_coor_file ), (nx+2nbgp)4, &
537	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
538
539
540	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
541	DO i = 0, nx+1
542	xkoor(i) = i * dx
543	ENDDO
544	DO j = 0, ny+1
545	ykoor(j) = j * dy
546	ENDDO
547	DO k = 0, nz_do3d
548	zkoor(k) = zu(k)
549	ENDDO
550
551	!
552	!-- Create and write on AVS coordinate file
553	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
554	openfile(31)%opened = .TRUE.
555
556	WRITE (31) xkoor, ykoor, zkoor
557	DEALLOCATE( xkoor, ykoor, zkoor )
558
559	!
560	!-- Create FLD file (being written on in close_file)
561	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
562	openfile(32)%opened = .TRUE.
563
564	!
565	!-- Create flag file for compressed 3D output,
566	!-- influences output commands in mrun
567	IF ( do3d_compress ) THEN
568	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
569	WRITE ( 3, '(1X)' )
570	CLOSE ( 3 )
571	ENDIF
572
573	ENDIF
574
575	ENDIF
576
577	!
578	!-- In case of data compression output of the coordinates of the
579	!-- corresponding partial array of a PE only once at the top of the file
580	IF ( avs_output .AND. do3d_compress ) THEN
581	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
582	ENDIF
583
584	CASE ( 40:49 )
585
586	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
587	suffix = ''
588	ELSE
589	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
590	ENDIF
591	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
592	TRIM( suffix ), &
593	FORM='FORMATTED' )
594	!
595	!-- Write contents comments at the top of the file
596	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
597	TRIM( region( file_id - 40 ) )
598
599	CASE ( 50:59 )
600
601	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
602	suffix = ''
603	ELSE
604	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
605	ENDIF
606	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
607	TRIM( suffix ), &
608	FORM='FORMATTED', RECL=496 )
609	!
610	!-- Write PROFIL parameter file for output of time series
611	!-- NOTE: To be on the safe side, this output is done at the beginning of
612	!-- the model run (in case of collapse) and it is repeated in
613	!-- close_file, then, however, with value ranges for the coordinate
614	!-- systems
615	!
616	!-- Firstly determine the number of the coordinate systems to be drawn
617	cranz = 0
618	DO j = 1, 10
619	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
620	ENDDO
621	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
622	TRIM( region( file_id - 50 ) )
623	!
624	!-- Write RAHMEN parameter
625	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
626	TRIM( suffix ), &
627	FORM='FORMATTED', DELIM='APOSTROPHE' )
628	WRITE ( 90, RAHMEN )
629	!
630	!-- Determine and write CROSS parameters for the individual coordinate
631	!-- systems
632	DO j = 1, 10
633	k = cross_ts_number_count(j)
634	IF ( k /= 0 ) THEN
635	!
636	!-- Store curve numbers, colours and line style
637	klist(1:k) = cross_ts_numbers(1:k,j)
638	klist(k+1:10) = 999999
639	cucol(1:k) = linecolors(1:k)
640	lstyle(1:k) = linestyles(1:k)
641	!
642	!-- Write CROSS parameter
643	WRITE ( 90, CROSS )
644
645	ENDIF
646	ENDDO
647
648	CLOSE ( 90 )
649	!
650	!-- Write all labels at the top of the data file, but only during the
651	!-- first run of a sequence of jobs. The following jobs copy the time
652	!-- series data to the bottom of that file.
653	IF ( runnr == 0 ) THEN
654	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
655	' ' // TRIM( region( file_id - 50 ) )
656	ENDIF
657
658
659	CASE ( 80 )
660
661	IF ( myid_char == '' ) THEN
662	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
663	FORM='FORMATTED', POSITION='APPEND' )
664	ELSE
665	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
666	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
667	ENDIF
668	#if defined( __parallel ) && ! defined ( __check )
669	!
670	!-- Set a barrier in order to allow that thereafter all other
671	!-- processors in the directory created by PE0 can open their file.
672	!-- WARNING: The following barrier will lead to hanging jobs, if
673	!-- check_open is first called from routine
674	!-- allocate_prt_memory!
675	IF ( .NOT. openfile(80)%opened_before ) THEN
676	CALL MPI_BARRIER( comm2d, ierr )
677	ENDIF
678	#endif
679	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
680	myid_char, &
681	FORM='FORMATTED', POSITION='APPEND' )
682	ENDIF
683
684	IF ( .NOT. openfile(80)%opened_before ) THEN
685	WRITE ( 80, 8000 ) TRIM( run_description_header )
686	ENDIF
687
688	CASE ( 81 )
689
690	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
691	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
692
693	CASE ( 82 )
694
695	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
696	POSITION = 'APPEND' )
697
698	CASE ( 83 )
699
700	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
701	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
702
703	CASE ( 84 )
704
705	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
706	POSITION='APPEND' )
707
708	CASE ( 85 )
709
710	IF ( myid_char == '' ) THEN
711	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
712	FORM='UNFORMATTED', POSITION='APPEND' )
713	ELSE
714	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
715	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
716	ENDIF
717	#if defined( __parallel ) && ! defined ( __check )
718	!
719	!-- Set a barrier in order to allow that thereafter all other
720	!-- processors in the directory created by PE0 can open their file
721	CALL MPI_BARRIER( comm2d, ierr )
722	#endif
723	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
724	myid_char, &
725	FORM='UNFORMATTED', POSITION='APPEND' )
726	ENDIF
727
728	IF ( .NOT. openfile(85)%opened_before ) THEN
729	WRITE ( 85 ) run_description_header
730	!
731	!-- Attention: change version number whenever the output format on
732	!-- unit 85 is changed (see also in routine
733	!-- lpm_data_output_particles)
734	rtext = 'data format version 3.0'
735	WRITE ( 85 ) rtext
736	WRITE ( 85 ) number_of_particle_groups, &
737	max_number_of_particle_groups
738	WRITE ( 85 ) particle_groups
739	ENDIF
740
741	#if defined( __netcdf )
742	CASE ( 101, 111 )
743	!
744	!-- Set filename depending on unit number
745	IF ( file_id == 101 ) THEN
746	filename = 'DATA_2D_XY_NETCDF' // coupling_char
747	av = 0
748	ELSE
749	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
750	av = 1
751	ENDIF
752	!
753	!-- Inquire, if there is a NetCDF file from a previuos run. This should
754	!-- be opened for extension, if its dimensions and variables match the
755	!-- actual run.
756	INQUIRE( FILE=filename, EXIST=netcdf_extend )
757
758	IF ( netcdf_extend ) THEN
759	!
760	!-- Open an existing NetCDF file for output
761	IF ( netcdf_data_format < 3 ) THEN
762	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
763	ELSE
764	#if defined( __netcdf4 )
765	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
766	COMM = comm2d, INFO = MPI_INFO_NULL )
767	#endif
768	ENDIF
769
770	CALL handle_netcdf_error( 'check_open', 20 )
771	!
772	!-- Read header information and set all ids. If there is a mismatch
773	!-- between the previuos and the actual run, netcdf_extend is returned
774	!-- as .FALSE.
775	CALL define_netcdf_header( 'xy', netcdf_extend, av )
776
777	!
778	!-- Remove the local file, if it can not be extended
779	IF ( .NOT. netcdf_extend ) THEN
780	nc_stat = NF90_CLOSE( id_set_xy(av) )
781	CALL handle_netcdf_error( 'check_open', 21 )
782	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
783	ENDIF
784
785	ENDIF
786
787	IF ( .NOT. netcdf_extend ) THEN
788	!
789	!-- Create a new NetCDF output file with requested NetCDF format
790	IF ( netcdf_data_format == 1 ) THEN
791	!
792	!-- Classic NetCDF format
793	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
794
795	ELSEIF ( netcdf_data_format == 2 ) THEN
796	!
797	!-- 64bit-offset format
798	nc_stat = NF90_CREATE( filename, &
799	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
800	id_set_xy(av) )
801
802	#if defined( __netcdf4 )
803	ELSEIF ( netcdf_data_format == 3 ) THEN
804	!
805	!-- NetCDF4/HDF5 format
806	nc_stat = NF90_CREATE( filename, &
807	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
808	id_set_xy(av), COMM = comm2d, &
809	INFO = MPI_INFO_NULL )
810
811	ELSEIF ( netcdf_data_format == 4 ) THEN
812	!
813	!-- NetCDF4/HDF5 format with classic model flag
814	nc_stat = NF90_CREATE( filename, &
815	OR( NF90_NOCLOBBER, &
816	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
817	id_set_xy(av), COMM = comm2d, &
818	INFO = MPI_INFO_NULL )
819	#endif
820	ENDIF
821
822	CALL handle_netcdf_error( 'check_open', 22 )
823
824	!
825	!-- Define the header
826	CALL define_netcdf_header( 'xy', netcdf_extend, av )
827
828	!
829	!-- In case of parallel NetCDF output, create flag file which tells
830	!-- combine_plot_fields that nothing is to do.
831	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
832	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
833	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
834	CLOSE( 99 )
835	ENDIF
836
837	ENDIF
838
839	CASE ( 102, 112 )
840	!
841	!-- Set filename depending on unit number
842	IF ( file_id == 102 ) THEN
843	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
844	av = 0
845	ELSE
846	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
847	av = 1
848	ENDIF
849	!
850	!-- Inquire, if there is a NetCDF file from a previuos run. This should
851	!-- be opened for extension, if its dimensions and variables match the
852	!-- actual run.
853	INQUIRE( FILE=filename, EXIST=netcdf_extend )
854
855	IF ( netcdf_extend ) THEN
856	!
857	!-- Open an existing NetCDF file for output
858	IF ( netcdf_data_format < 3 ) THEN
859	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
860	ELSE
861	#if defined( __netcdf4 )
862	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
863	COMM = comm2d, INFO = MPI_INFO_NULL )
864	#endif
865	ENDIF
866
867	CALL handle_netcdf_error( 'check_open', 23 )
868	!
869	!-- Read header information and set all ids. If there is a mismatch
870	!-- between the previuos and the actual run, netcdf_extend is returned
871	!-- as .FALSE.
872	CALL define_netcdf_header( 'xz', netcdf_extend, av )
873
874	!
875	!-- Remove the local file, if it can not be extended
876	IF ( .NOT. netcdf_extend ) THEN
877	nc_stat = NF90_CLOSE( id_set_xz(av) )
878	CALL handle_netcdf_error( 'check_open', 24 )
879	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
880	ENDIF
881
882	ENDIF
883
884	IF ( .NOT. netcdf_extend ) THEN
885	!
886	!-- Create a new NetCDF output file with requested NetCDF format
887	IF ( netcdf_data_format == 1 ) THEN
888	!
889	!-- Classic NetCDF format
890	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
891
892	ELSEIF ( netcdf_data_format == 2 ) THEN
893	!
894	!-- 64bit-offset format
895	nc_stat = NF90_CREATE( filename, &
896	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
897	id_set_xz(av) )
898
899	#if defined( __netcdf4 )
900	ELSEIF ( netcdf_data_format == 3 ) THEN
901	!
902	!-- NetCDF4/HDF5 format
903	nc_stat = NF90_CREATE( filename, &
904	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
905	id_set_xz(av), COMM = comm2d, &
906	INFO = MPI_INFO_NULL )
907
908	ELSEIF ( netcdf_data_format == 4 ) THEN
909	!
910	!-- NetCDF4/HDF5 format with classic model flag
911	nc_stat = NF90_CREATE( filename, &
912	OR( NF90_NOCLOBBER, &
913	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
914	id_set_xz(av), COMM = comm2d, &
915	INFO = MPI_INFO_NULL )
916	#endif
917	ENDIF
918
919	CALL handle_netcdf_error( 'check_open', 25 )
920
921	!
922	!-- Define the header
923	CALL define_netcdf_header( 'xz', netcdf_extend, av )
924
925	!
926	!-- In case of parallel NetCDF output, create flag file which tells
927	!-- combine_plot_fields that nothing is to do.
928	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
929	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
930	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
931	CLOSE( 99 )
932	ENDIF
933
934	ENDIF
935
936	CASE ( 103, 113 )
937	!
938	!-- Set filename depending on unit number
939	IF ( file_id == 103 ) THEN
940	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
941	av = 0
942	ELSE
943	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
944	av = 1
945	ENDIF
946	!
947	!-- Inquire, if there is a NetCDF file from a previuos run. This should
948	!-- be opened for extension, if its dimensions and variables match the
949	!-- actual run.
950	INQUIRE( FILE=filename, EXIST=netcdf_extend )
951
952	IF ( netcdf_extend ) THEN
953	!
954	!-- Open an existing NetCDF file for output
955	IF ( netcdf_data_format < 3 ) THEN
956	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
957	ELSE
958	#if defined( __netcdf4 )
959	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
960	COMM = comm2d, INFO = MPI_INFO_NULL )
961	#endif
962	ENDIF
963
964	CALL handle_netcdf_error( 'check_open', 26 )
965	!
966	!-- Read header information and set all ids. If there is a mismatch
967	!-- between the previuos and the actual run, netcdf_extend is returned
968	!-- as .FALSE.
969	CALL define_netcdf_header( 'yz', netcdf_extend, av )
970
971	!
972	!-- Remove the local file, if it can not be extended
973	IF ( .NOT. netcdf_extend ) THEN
974	nc_stat = NF90_CLOSE( id_set_yz(av) )
975	CALL handle_netcdf_error( 'check_open', 27 )
976	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
977	ENDIF
978
979	ENDIF
980
981	IF ( .NOT. netcdf_extend ) THEN
982	!
983	!-- Create a new NetCDF output file with requested NetCDF format
984	IF ( netcdf_data_format == 1 ) THEN
985	!
986	!-- Classic NetCDF format
987	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
988
989	ELSEIF ( netcdf_data_format == 2 ) THEN
990	!
991	!-- 64bit-offset format
992	nc_stat = NF90_CREATE( filename, &
993	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
994	id_set_yz(av) )
995
996	#if defined( __netcdf4 )
997	ELSEIF ( netcdf_data_format == 3 ) THEN
998	!
999	!-- NetCDF4/HDF5 format
1000	nc_stat = NF90_CREATE( filename, &
1001	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1002	id_set_yz(av), COMM = comm2d, &
1003	INFO = MPI_INFO_NULL )
1004
1005	ELSEIF ( netcdf_data_format == 4 ) THEN
1006	!
1007	!-- NetCDF4/HDF5 format with classic model flag
1008	nc_stat = NF90_CREATE( filename, &
1009	OR( NF90_NOCLOBBER, &
1010	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1011	id_set_yz(av), COMM = comm2d, &
1012	INFO = MPI_INFO_NULL )
1013	#endif
1014	ENDIF
1015
1016	CALL handle_netcdf_error( 'check_open', 28 )
1017
1018	!
1019	!-- Define the header
1020	CALL define_netcdf_header( 'yz', netcdf_extend, av )
1021
1022	!
1023	!-- In case of parallel NetCDF output, create flag file which tells
1024	!-- combine_plot_fields that nothing is to do.
1025	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1026	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
1027	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1028	CLOSE( 99 )
1029	ENDIF
1030
1031	ENDIF
1032
1033	CASE ( 104 )
1034	!
1035	!-- Set filename
1036	filename = 'DATA_1D_PR_NETCDF' // coupling_char
1037
1038	!
1039	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1040	!-- be opened for extension, if its variables match the actual run.
1041	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1042
1043	IF ( netcdf_extend ) THEN
1044	!
1045	!-- Open an existing NetCDF file for output
1046	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
1047	CALL handle_netcdf_error( 'check_open', 29 )
1048	!
1049	!-- Read header information and set all ids. If there is a mismatch
1050	!-- between the previuos and the actual run, netcdf_extend is returned
1051	!-- as .FALSE.
1052	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1053
1054	!
1055	!-- Remove the local file, if it can not be extended
1056	IF ( .NOT. netcdf_extend ) THEN
1057	nc_stat = NF90_CLOSE( id_set_pr )
1058	CALL handle_netcdf_error( 'check_open', 30 )
1059	CALL local_system( 'rm ' // TRIM( filename ) )
1060	ENDIF
1061
1062	ENDIF
1063
1064	IF ( .NOT. netcdf_extend ) THEN
1065	!
1066	!-- Create a new NetCDF output file
1067	IF ( netcdf_data_format > 1 ) THEN
1068	nc_stat = NF90_CREATE( filename, &
1069	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1070	id_set_pr )
1071	ELSE
1072	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1073	ENDIF
1074	CALL handle_netcdf_error( 'check_open', 31 )
1075	!
1076	!-- Define the header
1077	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1078
1079	ENDIF
1080
1081	CASE ( 105 )
1082	!
1083	!-- Set filename
1084	filename = 'DATA_1D_TS_NETCDF' // coupling_char
1085
1086	!
1087	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1088	!-- be opened for extension, if its variables match the actual run.
1089	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1090
1091	IF ( netcdf_extend ) THEN
1092	!
1093	!-- Open an existing NetCDF file for output
1094	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1095	CALL handle_netcdf_error( 'check_open', 32 )
1096	!
1097	!-- Read header information and set all ids. If there is a mismatch
1098	!-- between the previuos and the actual run, netcdf_extend is returned
1099	!-- as .FALSE.
1100	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1101
1102	!
1103	!-- Remove the local file, if it can not be extended
1104	IF ( .NOT. netcdf_extend ) THEN
1105	nc_stat = NF90_CLOSE( id_set_ts )
1106	CALL handle_netcdf_error( 'check_open', 33 )
1107	CALL local_system( 'rm ' // TRIM( filename ) )
1108	ENDIF
1109
1110	ENDIF
1111
1112	IF ( .NOT. netcdf_extend ) THEN
1113	!
1114	!-- Create a new NetCDF output file
1115	IF ( netcdf_data_format > 1 ) THEN
1116	nc_stat = NF90_CREATE( filename, &
1117	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1118	id_set_ts )
1119	ELSE
1120	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1121	ENDIF
1122	CALL handle_netcdf_error( 'check_open', 34 )
1123	!
1124	!-- Define the header
1125	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1126
1127	ENDIF
1128
1129
1130	CASE ( 106, 116 )
1131	!
1132	!-- Set filename depending on unit number
1133	IF ( file_id == 106 ) THEN
1134	filename = 'DATA_3D_NETCDF' // coupling_char
1135	av = 0
1136	ELSE
1137	filename = 'DATA_3D_AV_NETCDF' // coupling_char
1138	av = 1
1139	ENDIF
1140	!
1141	!-- Inquire, if there is a NetCDF file from a previous run. This should
1142	!-- be opened for extension, if its dimensions and variables match the
1143	!-- actual run.
1144	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1145
1146	IF ( netcdf_extend ) THEN
1147	!
1148	!-- Open an existing NetCDF file for output
1149	IF ( netcdf_data_format < 3 ) THEN
1150	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1151	ELSE
1152	#if defined( __netcdf4 )
1153	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1154	COMM = comm2d, INFO = MPI_INFO_NULL )
1155	#endif
1156	ENDIF
1157	CALL handle_netcdf_error( 'check_open', 35 )
1158	!
1159	!-- Read header information and set all ids. If there is a mismatch
1160	!-- between the previuos and the actual run, netcdf_extend is returned
1161	!-- as .FALSE.
1162	CALL define_netcdf_header( '3d', netcdf_extend, av )
1163
1164	!
1165	!-- Remove the local file, if it can not be extended
1166	IF ( .NOT. netcdf_extend ) THEN
1167	nc_stat = NF90_CLOSE( id_set_3d(av) )
1168	CALL handle_netcdf_error( 'check_open', 36 )
1169	CALL local_system('rm ' // TRIM( filename ) )
1170	ENDIF
1171
1172	ENDIF
1173
1174	IF ( .NOT. netcdf_extend ) THEN
1175	!
1176	!-- Create a new NetCDF output file with requested NetCDF format
1177	IF ( netcdf_data_format == 1 ) THEN
1178	!
1179	!-- Classic NetCDF format
1180	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1181
1182	ELSEIF ( netcdf_data_format == 2 ) THEN
1183	!
1184	!-- 64bit-offset format
1185	nc_stat = NF90_CREATE( filename, &
1186	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1187	id_set_3d(av) )
1188
1189	#if defined( __netcdf4 )
1190	ELSEIF ( netcdf_data_format == 3 ) THEN
1191	!
1192	!-- NetCDF4/HDF5 format
1193	nc_stat = NF90_CREATE( filename, &
1194	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1195	id_set_3d(av), COMM = comm2d, &
1196	INFO = MPI_INFO_NULL )
1197
1198	ELSEIF ( netcdf_data_format == 4 ) THEN
1199	!
1200	!-- NetCDF4/HDF5 format with classic model flag
1201	nc_stat = NF90_CREATE( filename, &
1202	OR( NF90_NOCLOBBER, &
1203	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1204	id_set_3d(av), COMM = comm2d, &
1205	INFO = MPI_INFO_NULL )
1206	#endif
1207	ENDIF
1208
1209	CALL handle_netcdf_error( 'check_open', 37 )
1210
1211	!
1212	!-- Define the header
1213	CALL define_netcdf_header( '3d', netcdf_extend, av )
1214
1215	!
1216	!-- In case of parallel NetCDF output, create flag file which tells
1217	!-- combine_plot_fields that nothing is to do.
1218	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1219	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1220	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1221	CLOSE( 99 )
1222	ENDIF
1223
1224	ENDIF
1225
1226
1227	CASE ( 107 )
1228	!
1229	!-- Set filename
1230	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1231
1232	!
1233	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1234	!-- be opened for extension, if its variables match the actual run.
1235	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1236
1237	IF ( netcdf_extend ) THEN
1238	!
1239	!-- Open an existing NetCDF file for output
1240	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1241	CALL handle_netcdf_error( 'check_open', 38 )
1242
1243	!
1244	!-- Read header information and set all ids. If there is a mismatch
1245	!-- between the previuos and the actual run, netcdf_extend is returned
1246	!-- as .FALSE.
1247	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1248
1249	!
1250	!-- Remove the local file, if it can not be extended
1251	IF ( .NOT. netcdf_extend ) THEN
1252	nc_stat = NF90_CLOSE( id_set_sp )
1253	CALL handle_netcdf_error( 'check_open', 39 )
1254	CALL local_system( 'rm ' // TRIM( filename ) )
1255	ENDIF
1256
1257	ENDIF
1258
1259	IF ( .NOT. netcdf_extend ) THEN
1260	!
1261	!-- Create a new NetCDF output file
1262	IF ( netcdf_data_format > 1 ) THEN
1263	nc_stat = NF90_CREATE( filename, &
1264	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1265	id_set_sp )
1266	ELSE
1267	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1268	ENDIF
1269	CALL handle_netcdf_error( 'check_open', 40 )
1270	!
1271	!-- Define the header
1272	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1273
1274	ENDIF
1275
1276
1277	CASE ( 108 )
1278
1279	IF ( myid_char == '' ) THEN
1280	filename = 'DATA_PRT_NETCDF' // coupling_char
1281	ELSE
1282	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1283	myid_char
1284	ENDIF
1285	!
1286	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1287	!-- be opened for extension, if its variables match the actual run.
1288	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1289
1290	IF ( netcdf_extend ) THEN
1291	!
1292	!-- Open an existing NetCDF file for output
1293	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1294	CALL handle_netcdf_error( 'check_open', 41 )
1295	!
1296	!-- Read header information and set all ids. If there is a mismatch
1297	!-- between the previuos and the actual run, netcdf_extend is returned
1298	!-- as .FALSE.
1299	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1300
1301	!
1302	!-- Remove the local file, if it can not be extended
1303	IF ( .NOT. netcdf_extend ) THEN
1304	nc_stat = NF90_CLOSE( id_set_prt )
1305	CALL handle_netcdf_error( 'check_open', 42 )
1306	CALL local_system( 'rm ' // filename )
1307	ENDIF
1308
1309	ENDIF
1310
1311	IF ( .NOT. netcdf_extend ) THEN
1312
1313	!
1314	!-- For runs on multiple processors create the subdirectory
1315	IF ( myid_char /= '' ) THEN
1316	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1317	THEN ! needs modification in case of non-extendable sets
1318	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1319	TRIM( coupling_char ) // '/' )
1320	ENDIF
1321	#if defined( __parallel ) && ! defined ( __check )
1322	!
1323	!-- Set a barrier in order to allow that all other processors in the
1324	!-- directory created by PE0 can open their file
1325	CALL MPI_BARRIER( comm2d, ierr )
1326	#endif
1327	ENDIF
1328
1329	!
1330	!-- Create a new NetCDF output file with requested NetCDF format
1331	IF ( netcdf_data_format == 1 ) THEN
1332	!
1333	!-- Classic NetCDF format
1334	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1335
1336	ELSEIF ( netcdf_data_format == 2 ) THEN
1337	!
1338	!-- 64bit-offset format
1339	nc_stat = NF90_CREATE( filename, &
1340	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1341	id_set_prt )
1342
1343	#if defined( __netcdf4 )
1344	ELSEIF ( netcdf_data_format == 3 ) THEN
1345	!
1346	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
1347	nc_stat = NF90_CREATE( filename, &
1348	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1349	id_set_prt )
1350
1351	ELSEIF ( netcdf_data_format == 4 ) THEN
1352	!
1353	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
1354	!-- output into a single file!
1355	nc_stat = NF90_CREATE( filename, &
1356	OR( NF90_NOCLOBBER, &
1357	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1358	id_set_prt )
1359	#endif
1360	ENDIF
1361
1362	CALL handle_netcdf_error( 'check_open', 43 )
1363
1364	!
1365	!-- Define the header
1366	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1367
1368	ENDIF
1369
1370	CASE ( 109 )
1371	!
1372	!-- Set filename
1373	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1374
1375	!
1376	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1377	!-- be opened for extension, if its variables match the actual run.
1378	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1379
1380	IF ( netcdf_extend ) THEN
1381	!
1382	!-- Open an existing NetCDF file for output
1383	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1384	CALL handle_netcdf_error( 'check_open', 393 )
1385	!
1386	!-- Read header information and set all ids. If there is a mismatch
1387	!-- between the previuos and the actual run, netcdf_extend is returned
1388	!-- as .FALSE.
1389	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1390
1391	!
1392	!-- Remove the local file, if it can not be extended
1393	IF ( .NOT. netcdf_extend ) THEN
1394	nc_stat = NF90_CLOSE( id_set_pts )
1395	CALL handle_netcdf_error( 'check_open', 394 )
1396	CALL local_system( 'rm ' // TRIM( filename ) )
1397	ENDIF
1398
1399	ENDIF
1400
1401	IF ( .NOT. netcdf_extend ) THEN
1402	!
1403	!-- Create a new NetCDF output file
1404	IF ( netcdf_data_format > 1 ) THEN
1405	nc_stat = NF90_CREATE( filename, &
1406	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1407	id_set_pts )
1408	ELSE
1409	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1410	ENDIF
1411	CALL handle_netcdf_error( 'check_open', 395 )
1412	!
1413	!-- Define the header
1414	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1415
1416	ENDIF
1417
1418	CASE ( 201:200+2*max_masks )
1419	!
1420	!-- Set filename depending on unit number
1421	IF ( file_id <= 200+max_masks ) THEN
1422	mid = file_id - 200
1423	WRITE ( mask_char,'(I2.2)') mid
1424	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1425	av = 0
1426	ELSE
1427	mid = file_id - (200+max_masks)
1428	WRITE ( mask_char,'(I2.2)') mid
1429	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1430	coupling_char
1431	av = 1
1432	ENDIF
1433	!
1434	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1435	!-- be opened for extension, if its dimensions and variables match the
1436	!-- actual run.
1437	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1438
1439	IF ( netcdf_extend ) THEN
1440	!
1441	!-- Open an existing NetCDF file for output
1442	#if defined( __netcdf4 )
1443	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1444	COMM = comm2d, INFO = MPI_INFO_NULL )
1445	#else
1446	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1447	#endif
1448	CALL handle_netcdf_error( 'check_open', 456 )
1449	!
1450	!-- Read header information and set all ids. If there is a mismatch
1451	!-- between the previuos and the actual run, netcdf_extend is returned
1452	!-- as .FALSE.
1453	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1454
1455	!
1456	!-- Remove the local file, if it can not be extended
1457	IF ( .NOT. netcdf_extend ) THEN
1458	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1459	CALL handle_netcdf_error( 'check_open', 457 )
1460	CALL local_system('rm ' // TRIM( filename ) )
1461	ENDIF
1462
1463	ENDIF
1464
1465	IF ( .NOT. netcdf_extend ) THEN
1466	!
1467	!-- Create a new NetCDF output file with requested NetCDF format
1468	IF ( netcdf_data_format == 1 ) THEN
1469	!
1470	!-- Classic NetCDF format
1471	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1472	id_set_mask(mid,av) )
1473
1474	ELSEIF ( netcdf_data_format == 2 ) THEN
1475	!
1476	!-- 64bit-offset format
1477	nc_stat = NF90_CREATE( filename, &
1478	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1479	id_set_mask(mid,av) )
1480
1481
1482	#if defined( __netcdf4 )
1483	ELSEIF ( netcdf_data_format == 3 ) THEN
1484	!
1485	!-- NetCDF4/HDF5 format
1486	nc_stat = NF90_CREATE( filename, &
1487	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1488	id_set_mask(mid,av), COMM = comm2d, &
1489	INFO = MPI_INFO_NULL )
1490
1491	ELSEIF ( netcdf_data_format == 4 ) THEN
1492	!
1493	!-- NetCDF4/HDF5 format with classic model flag
1494	nc_stat = NF90_CREATE( filename, &
1495	OR( NF90_NOCLOBBER, &
1496	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1497	id_set_mask(mid,av), COMM = comm2d, &
1498	INFO = MPI_INFO_NULL )
1499	#endif
1500	ENDIF
1501
1502	CALL handle_netcdf_error( 'check_open', 458 )
1503	!
1504	!-- Define the header
1505	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1506
1507	ENDIF
1508
1509
1510	#else
1511
1512	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1513
1514	!
1515	!-- Nothing is done in case of missing netcdf support
1516	RETURN
1517
1518	#endif
1519
1520	CASE DEFAULT
1521
1522	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1523	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1524
1525	END SELECT
1526
1527	!
1528	!-- Set open flag
1529	openfile(file_id)%opened = .TRUE.
1530
1531	!
1532	!-- Formats
1533	3300 FORMAT ('#'/ &
1534	'coord 1 file=',A,' filetype=unformatted'/ &
1535	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1536	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1537	'#')
1538	4000 FORMAT ('# ',A)
1539	5000 FORMAT ('# ',A/ &
1540	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1541	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1542	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1543	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1544	8000 FORMAT (A/ &
1545	' step time # of parts lPE sent/recv rPE sent/recv ',&
1546	'sPE sent/recv nPE sent/recv max # of parts'/ &
1547	103('-'))
1548
1549	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |