Home

Context Navigation

check_open.f90 @ 849

Last change on this file since 849 was 849, checked in by raasch, 12 years ago

Changed:

Original routine advec_particles split into several new subroutines and renamed
lpm.
init_particles renamed lpm_init
user_advec_particles renamed user_lpm_advec,
particle_boundary_conds renamed lpm_boundary_conds,
set_particle_attributes renamed lpm_set_attributes,
user_init_particles renamed user_lpm_init,
user_particle_attributes renamed user_lpm_set_attributes
(Makefile, lpm_droplet_collision, lpm_droplet_condensation, init_3d_model, modules, palm, read_var_list, time_integration, write_var_list, deleted: advec_particles, init_particles, particle_boundary_conds, set_particle_attributes, user_advec_particles, user_init_particles, user_particle_attributes, new: lpm, lpm_advec, lpm_boundary_conds, lpm_calc_liquid_water_content, lpm_data_output_particles, lpm_droplet_collision, lpm_drollet_condensation, lpm_exchange_horiz, lpm_extend_particle_array, lpm_extend_tails, lpm_extend_tail_array, lpm_init, lpm_init_sgs_tke, lpm_pack_arrays, lpm_read_restart_file, lpm_release_set, lpm_set_attributes, lpm_sort_arrays, lpm_write_exchange_statistics, lpm_write_restart_file, user_lpm_advec, user_lpm_init, user_lpm_set_attributes

Property svn:keywords set to Id

File size: 56.8 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_open.f90 849 2012-03-15 10:35:09Z raasch $
11	!
12	! 809 2012-01-30 13:32:58Z maronga
13	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
14	!
15	! 807 2012-01-25 11:53:51Z maronga
16	! New cpp directive "__check" implemented which is used by check_namelist_files
17	!
18	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
19	!
20	! 667 2010-12-23 12:06:00Z suehring/gryschka
21	! Output of total array size was adapted to nbgp.
22	!
23	! 600 2010-11-24 16:10:51Z raasch
24	! bugfix in opening of cross section netcdf-files (parallel opening with
25	! netcdf4 only works for netcdf_data_format > 2)
26	!
27	! 564 2010-09-30 13:18:59Z helmke
28	! start number of mask output files changed to 201, netcdf message identifiers
29	! of masked output changed
30	!
31	! 519 2010-03-19 05:30:02Z raasch
32	! NetCDF4 support for particle data
33	!
34	! 493 2010-03-01 08:30:24Z raasch
35	! NetCDF4 support (parallel output)
36	!
37	! 410 2009-12-04 17:05:40Z letzel
38	! masked data output
39	!
40	! 277 2009-03-31 09:13:47Z heinze
41	! Output of NetCDF messages with aid of message handling routine.
42	! Output of messages replaced by message handling routine
43	!
44	! 146 2008-01-17 13:08:34Z raasch
45	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
46	! because only this file contains the global variables,
47	! myid_char_14 removed
48	!
49	! 120 2007-10-17 11:54:43Z raasch
50	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
51	!
52	! 105 2007-08-08 07:12:55Z raasch
53	! Different filenames are used in case of a coupled simulation,
54	! coupling_char added to all relevant filenames
55	!
56	! 82 2007-04-16 15:40:52Z raasch
57	! Call of local_getenv removed, preprocessor directives for old systems removed
58	!
59	! 46 2007-03-05 06:00:47Z raasch
60	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
61	!
62	! RCS Log replace by Id keyword, revision history cleaned up
63	!
64	! Revision 1.44 2006/08/22 13:48:34 raasch
65	! xz and yz cross sections now up to nzt+1
66	!
67	! Revision 1.1 1997/08/11 06:10:55 raasch
68	! Initial revision
69	!
70	!
71	! Description:
72	! ------------
73	! Check if file unit is open. If not, open file and, if necessary, write a
74	! header or start other initializing actions, respectively.
75	!------------------------------------------------------------------------------!
76
77	USE array_kind
78	USE arrays_3d
79	USE control_parameters
80	USE grid_variables
81	USE indices
82	USE netcdf_control
83	USE particle_attributes
84	USE pegrid
85	USE profil_parameter
86	USE statistics
87
88	IMPLICIT NONE
89
90	CHARACTER (LEN=2) :: mask_char, suffix
91	CHARACTER (LEN=20) :: xtext = 'time in s'
92	CHARACTER (LEN=30) :: filename
93	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
94	avs_data_file_localname
95	CHARACTER (LEN=80) :: rtext
96	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
97	batch_scp, zeile
98	CHARACTER (LEN=400) :: command
99
100	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
101	j, k, legpos = 1, timodex = 1
102	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
103
104	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
105	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
106	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
107
108	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
109	sizex = 250.0, sizey = 40.0, texfac = 1.5
110
111	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
112	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
113
114
115	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
116	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
117	rand, rlegfak, sizex, sizey, texfac, &
118	timodex, twoxa, twoya, xtext
119
120
121	!
122	!-- Immediate return if file already open
123	IF ( openfile(file_id)%opened ) RETURN
124
125	#if ! defined ( __check )
126	!
127	!-- Only certain files are allowed to be re-opened
128	!-- NOTE: some of the other files perhaps also could be re-opened, but it
129	!-- has not been checked so far, if it works!
130	IF ( openfile(file_id)%opened_before ) THEN
131	SELECT CASE ( file_id )
132	CASE ( 13, 14, 21, 22, 23, 80:85 )
133	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
134	message_string = 're-open of unit ' // &
135	'14 is not verified. Please check results!'
136	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
137	ENDIF
138
139	CASE DEFAULT
140	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
141	' is not allowed'
142	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
143
144	RETURN
145
146	END SELECT
147	ENDIF
148	#endif
149
150	!
151	!-- Check if file may be opened on the relevant PE
152	SELECT CASE ( file_id )
153
154	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
155
156	IF ( myid /= 0 ) THEN
157	WRITE( message_string, * ) 'opening file-id ',file_id, &
158	' not allowed for PE ',myid
159	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
160	ENDIF
161
162	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
163
164	IF ( netcdf_data_format < 3 ) THEN
165
166	IF ( myid /= 0 ) THEN
167	WRITE( message_string, * ) 'opening file-id ',file_id, &
168	' not allowed for PE ',myid
169	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
170	ENDIF
171
172	ENDIF
173
174	CASE ( 21, 22, 23 )
175
176	IF ( .NOT. data_output_2d_on_each_pe ) THEN
177	IF ( myid /= 0 ) THEN
178	WRITE( message_string, * ) 'opening file-id ',file_id, &
179	' not allowed for PE ',myid
180	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
181	END IF
182	ENDIF
183
184	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
185
186	!
187	!-- File-ids that are used temporarily in other routines
188	WRITE( message_string, * ) 'opening file-id ',file_id, &
189	' is not allowed since it is used otherwise'
190	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
191
192	END SELECT
193
194	!
195	!-- Open relevant files
196	SELECT CASE ( file_id )
197
198	CASE ( 11 )
199
200	#if defined ( __check )
201	!
202	!-- In case of a prior parameter file check, the p3d data is stored in
203	!-- PARIN, while the p3df is stored in PARINF. This only applies to
204	!-- check_namelist_files!
205	IF ( check_restart == 2 ) THEN
206	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
207	STATUS='OLD' )
208	ELSE
209	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
210	STATUS='OLD' )
211	END IF
212	#else
213
214	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
215	STATUS='OLD' )
216	#endif
217
218	CASE ( 13 )
219
220	IF ( myid_char == '' ) THEN
221	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
222	FORM='UNFORMATTED', STATUS='OLD' )
223	ELSE
224	!
225	!-- First opening of unit 13 openes file _0000 on all PEs because only
226	!-- this file contains the global variables
227	IF ( .NOT. openfile(file_id)%opened_before ) THEN
228	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
229	FORM='UNFORMATTED', STATUS='OLD' )
230	ELSE
231	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
232	FORM='UNFORMATTED', STATUS='OLD' )
233	ENDIF
234	ENDIF
235
236	CASE ( 14 )
237
238	IF ( myid_char == '' ) THEN
239	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
240	FORM='UNFORMATTED', POSITION='APPEND' )
241	ELSE
242	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
243	CALL local_system( 'mkdir BINOUT' // coupling_char )
244	ENDIF
245	#if defined( __parallel ) && ! defined ( __check )
246	!
247	!-- Set a barrier in order to allow that all other processors in the
248	!-- directory created by PE0 can open their file
249	CALL MPI_BARRIER( comm2d, ierr )
250	#endif
251	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
252	FORM='UNFORMATTED', POSITION='APPEND' )
253	ENDIF
254
255	CASE ( 15 )
256
257	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
258
259	CASE ( 16 )
260
261	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
262
263	CASE ( 17 )
264
265	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
266
267	CASE ( 18 )
268
269	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
270
271	CASE ( 19 )
272
273	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
274
275	CASE ( 20 )
276
277	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
278	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
279	ENDIF
280	IF ( myid_char == '' ) THEN
281	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
282	FORM='UNFORMATTED', POSITION='APPEND' )
283	ELSE
284	#if defined( __parallel ) && ! defined ( __check )
285	!
286	!-- Set a barrier in order to allow that all other processors in the
287	!-- directory created by PE0 can open their file
288	CALL MPI_BARRIER( comm2d, ierr )
289	#endif
290	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
291	FORM='UNFORMATTED', POSITION='APPEND' )
292	ENDIF
293
294	CASE ( 21 )
295
296	IF ( data_output_2d_on_each_pe ) THEN
297	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
298	FORM='UNFORMATTED', POSITION='APPEND' )
299	ELSE
300	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
301	FORM='UNFORMATTED', POSITION='APPEND' )
302	ENDIF
303
304	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
305	!
306	!-- Output for combine_plot_fields
307	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
308	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
309	WRITE (21) 0, nx+1, 0, ny+1 ! output part
310	ENDIF
311	!
312	!-- Determine and write ISO2D coordiante header
313	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
314	hu = 0.0
315	ho = (ny+1) * dy
316	DO i = 1, ny
317	eta(i) = REAL( i ) / ( ny + 1.0 )
318	ENDDO
319	eta(0) = 0.0
320	eta(ny+1) = 1.0
321
322	WRITE (21) dx,eta,hu,ho
323	DEALLOCATE( eta, ho, hu )
324
325	!
326	!-- Create output file for local parameters
327	IF ( iso2d_output ) THEN
328	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
329	FORM='FORMATTED', DELIM='APOSTROPHE' )
330	openfile(27)%opened = .TRUE.
331	ENDIF
332
333	ENDIF
334
335	CASE ( 22 )
336
337	IF ( data_output_2d_on_each_pe ) THEN
338	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
339	FORM='UNFORMATTED', POSITION='APPEND' )
340	ELSE
341	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
342	POSITION='APPEND' )
343	ENDIF
344
345	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
346	!
347	!-- Output for combine_plot_fields
348	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
349	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
350	WRITE (22) 0, nx+1, 0, nz+1 ! output part
351	ENDIF
352	!
353	!-- Determine and write ISO2D coordiante header
354	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
355	hu = 0.0
356	ho = zu(nz+1)
357	DO i = 1, nz
358	eta(i) = REAL( zu(i) ) / zu(nz+1)
359	ENDDO
360	eta(0) = 0.0
361	eta(nz+1) = 1.0
362
363	WRITE (22) dx,eta,hu,ho
364	DEALLOCATE( eta, ho, hu )
365	!
366	!-- Create output file for local parameters
367	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
368	FORM='FORMATTED', DELIM='APOSTROPHE' )
369	openfile(28)%opened = .TRUE.
370
371	ENDIF
372
373	CASE ( 23 )
374
375	IF ( data_output_2d_on_each_pe ) THEN
376	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
377	FORM='UNFORMATTED', POSITION='APPEND' )
378	ELSE
379	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
380	POSITION='APPEND' )
381	ENDIF
382
383	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
384	!
385	!-- Output for combine_plot_fields
386	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
387	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
388	WRITE (23) 0, ny+1, 0, nz+1 ! output part
389	ENDIF
390	!
391	!-- Determine and write ISO2D coordiante header
392	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
393	hu = 0.0
394	ho = zu(nz+1)
395	DO i = 1, nz
396	eta(i) = REAL( zu(i) ) / zu(nz+1)
397	ENDDO
398	eta(0) = 0.0
399	eta(nz+1) = 1.0
400
401	WRITE (23) dx,eta,hu,ho
402	DEALLOCATE( eta, ho, hu )
403	!
404	!-- Create output file for local parameters
405	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
406	FORM='FORMATTED', DELIM='APOSTROPHE' )
407	openfile(29)%opened = .TRUE.
408
409	ENDIF
410
411	CASE ( 30 )
412
413	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
414	FORM='UNFORMATTED' )
415	!
416	!-- Write coordinate file for AVS
417	IF ( myid == 0 ) THEN
418	#if defined( __parallel )
419	!
420	!-- Specifications for combine_plot_fields
421	IF ( .NOT. do3d_compress ) THEN
422	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
423	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
424	ENDIF
425	#endif
426	!
427	!-- Write coordinate file for AVS:
428	!-- First determine file names (including cyle numbers) of AVS files on
429	!-- target machine (to which the files are to be transferred).
430	!-- Therefore path information has to be obtained first.
431	IF ( avs_output ) THEN
432	iaddres = LEN_TRIM( return_addres )
433	iusern = LEN_TRIM( return_username )
434
435	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
436	DO WHILE ( .NOT. avs_coor_file_found .OR. &
437	.NOT. avs_data_file_found )
438
439	READ ( 3, '(A)', END=1 ) zeile
440
441	SELECT CASE ( zeile(1:11) )
442
443	CASE ( 'PLOT3D_COOR' )
444	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
445	avs_coor_file_localname
446	avs_coor_file_found = .TRUE.
447
448	CASE ( 'PLOT3D_DATA' )
449	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
450	avs_data_file_localname
451	avs_data_file_found = .TRUE.
452
453	CASE DEFAULT
454	READ ( 3, '(A/A)' ) zeile, zeile
455
456	END SELECT
457
458	ENDDO
459	!
460	!-- Now the cycle numbers on the remote machine must be obtained
461	!-- using batch_scp
462	1 CLOSE ( 3 )
463	IF ( .NOT. avs_coor_file_found .OR. &
464	.NOT. avs_data_file_found ) THEN
465	message_string= 'no filename for AVS-data-file ' // &
466	'found in MRUN-config-file' // &
467	' &filename in FLD-file set to "unknown"'
468	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
469
470	avs_coor_file = 'unknown'
471	avs_data_file = 'unknown'
472	ELSE
473	get_filenames = .TRUE.
474	IF ( TRIM( host ) == 'hpmuk' .OR. &
475	TRIM( host ) == 'lcmuk' ) THEN
476	batch_scp = '/home/raasch/pub/batch_scp'
477	ELSEIF ( TRIM( host ) == 'nech' ) THEN
478	batch_scp = '/ipf/b/b323011/pub/batch_scp'
479	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
480	TRIM( host ) == 'ibmb' ) THEN
481	batch_scp = '/home/h/niksiraa/pub/batch_scp'
482	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
483	batch_scp = '/home/nhbksira/pub/batch_scp'
484	ELSE
485	message_string= 'no path for batch_scp on host "' // &
486	TRIM( host ) // '"'
487	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
488	get_filenames = .FALSE.
489	ENDIF
490
491	IF ( get_filenames ) THEN
492	!
493	!-- Determine the coordinate file name.
494	!-- /etc/passwd serves as Dummy-Datei, because it is not
495	!-- really transferred.
496	command = TRIM( batch_scp ) // ' -n -u ' // &
497	return_username(1:iusern) // ' ' // &
498	return_addres(1:iaddres) // ' /etc/passwd "' // &
499	TRIM( avs_coor_file_catalog ) // '" ' // &
500	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
501
502	CALL local_system( command )
503	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
504	READ ( 3, '(A)' ) avs_coor_file
505	CLOSE ( 3 )
506	!
507	!-- Determine the data file name
508	command = TRIM( batch_scp ) // ' -n -u ' // &
509	return_username(1:iusern) // ' ' // &
510	return_addres(1:iaddres) // ' /etc/passwd "' // &
511	TRIM( avs_data_file_catalog ) // '" ' // &
512	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
513
514	CALL local_system( command )
515	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
516	READ ( 3, '(A)' ) avs_data_file
517	CLOSE ( 3 )
518
519	ELSE
520
521	avs_coor_file = 'unknown'
522	avs_data_file = 'unknown'
523
524	ENDIF
525
526	ENDIF
527
528	!
529	!-- Output of the coordinate file description for FLD-file
530	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
531	openfile(33)%opened = .TRUE.
532	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
533	TRIM( avs_coor_file ), (nx+2nbgp)4, &
534	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
535
536
537	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
538	DO i = 0, nx+1
539	xkoor(i) = i * dx
540	ENDDO
541	DO j = 0, ny+1
542	ykoor(j) = j * dy
543	ENDDO
544	DO k = 0, nz_do3d
545	zkoor(k) = zu(k)
546	ENDDO
547
548	!
549	!-- Create and write on AVS coordinate file
550	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
551	openfile(31)%opened = .TRUE.
552
553	WRITE (31) xkoor, ykoor, zkoor
554	DEALLOCATE( xkoor, ykoor, zkoor )
555
556	!
557	!-- Create FLD file (being written on in close_file)
558	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
559	openfile(32)%opened = .TRUE.
560
561	!
562	!-- Create flag file for compressed 3D output,
563	!-- influences output commands in mrun
564	IF ( do3d_compress ) THEN
565	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
566	WRITE ( 3, '(1X)' )
567	CLOSE ( 3 )
568	ENDIF
569
570	ENDIF
571
572	ENDIF
573
574	!
575	!-- In case of data compression output of the coordinates of the
576	!-- corresponding partial array of a PE only once at the top of the file
577	IF ( avs_output .AND. do3d_compress ) THEN
578	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
579	ENDIF
580
581	CASE ( 40:49 )
582
583	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
584	suffix = ''
585	ELSE
586	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
587	ENDIF
588	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
589	TRIM( suffix ), &
590	FORM='FORMATTED' )
591	!
592	!-- Write contents comments at the top of the file
593	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
594	TRIM( region( file_id - 40 ) )
595
596	CASE ( 50:59 )
597
598	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
599	suffix = ''
600	ELSE
601	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
602	ENDIF
603	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
604	TRIM( suffix ), &
605	FORM='FORMATTED', RECL=496 )
606	!
607	!-- Write PROFIL parameter file for output of time series
608	!-- NOTE: To be on the safe side, this output is done at the beginning of
609	!-- the model run (in case of collapse) and it is repeated in
610	!-- close_file, then, however, with value ranges for the coordinate
611	!-- systems
612	!
613	!-- Firstly determine the number of the coordinate systems to be drawn
614	cranz = 0
615	DO j = 1, 10
616	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
617	ENDDO
618	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
619	TRIM( region( file_id - 50 ) )
620	!
621	!-- Write RAHMEN parameter
622	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
623	TRIM( suffix ), &
624	FORM='FORMATTED', DELIM='APOSTROPHE' )
625	WRITE ( 90, RAHMEN )
626	!
627	!-- Determine and write CROSS parameters for the individual coordinate
628	!-- systems
629	DO j = 1, 10
630	k = cross_ts_number_count(j)
631	IF ( k /= 0 ) THEN
632	!
633	!-- Store curve numbers, colours and line style
634	klist(1:k) = cross_ts_numbers(1:k,j)
635	klist(k+1:10) = 999999
636	cucol(1:k) = linecolors(1:k)
637	lstyle(1:k) = linestyles(1:k)
638	!
639	!-- Write CROSS parameter
640	WRITE ( 90, CROSS )
641
642	ENDIF
643	ENDDO
644
645	CLOSE ( 90 )
646	!
647	!-- Write all labels at the top of the data file, but only during the
648	!-- first run of a sequence of jobs. The following jobs copy the time
649	!-- series data to the bottom of that file.
650	IF ( runnr == 0 ) THEN
651	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
652	' ' // TRIM( region( file_id - 50 ) )
653	ENDIF
654
655
656	CASE ( 80 )
657
658	IF ( myid_char == '' ) THEN
659	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
660	FORM='FORMATTED', POSITION='APPEND' )
661	ELSE
662	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
663	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
664	ENDIF
665	#if defined( __parallel ) && ! defined ( __check )
666	!
667	!-- Set a barrier in order to allow that thereafter all other
668	!-- processors in the directory created by PE0 can open their file.
669	!-- WARNING: The following barrier will lead to hanging jobs, if
670	!-- check_open is first called from routine
671	!-- allocate_prt_memory!
672	IF ( .NOT. openfile(80)%opened_before ) THEN
673	CALL MPI_BARRIER( comm2d, ierr )
674	ENDIF
675	#endif
676	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
677	myid_char, &
678	FORM='FORMATTED', POSITION='APPEND' )
679	ENDIF
680
681	IF ( .NOT. openfile(80)%opened_before ) THEN
682	WRITE ( 80, 8000 ) TRIM( run_description_header )
683	ENDIF
684
685	CASE ( 81 )
686
687	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
688	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
689
690	CASE ( 82 )
691
692	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
693	POSITION = 'APPEND' )
694
695	CASE ( 83 )
696
697	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
698	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
699
700	CASE ( 84 )
701
702	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
703	POSITION='APPEND' )
704
705	CASE ( 85 )
706
707	IF ( myid_char == '' ) THEN
708	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
709	FORM='UNFORMATTED', POSITION='APPEND' )
710	ELSE
711	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
712	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
713	ENDIF
714	#if defined( __parallel ) && ! defined ( __check )
715	!
716	!-- Set a barrier in order to allow that thereafter all other
717	!-- processors in the directory created by PE0 can open their file
718	CALL MPI_BARRIER( comm2d, ierr )
719	#endif
720	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
721	myid_char, &
722	FORM='UNFORMATTED', POSITION='APPEND' )
723	ENDIF
724
725	IF ( .NOT. openfile(85)%opened_before ) THEN
726	WRITE ( 85 ) run_description_header
727	!
728	!-- Attention: change version number whenever the output format on
729	!-- unit 85 is changed (see also in routine
730	!-- lpm_data_output_particles)
731	rtext = 'data format version 3.0'
732	WRITE ( 85 ) rtext
733	WRITE ( 85 ) number_of_particle_groups, &
734	max_number_of_particle_groups
735	WRITE ( 85 ) particle_groups
736	ENDIF
737
738	#if defined( __netcdf )
739	CASE ( 101, 111 )
740	!
741	!-- Set filename depending on unit number
742	IF ( file_id == 101 ) THEN
743	filename = 'DATA_2D_XY_NETCDF' // coupling_char
744	av = 0
745	ELSE
746	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
747	av = 1
748	ENDIF
749	!
750	!-- Inquire, if there is a NetCDF file from a previuos run. This should
751	!-- be opened for extension, if its dimensions and variables match the
752	!-- actual run.
753	INQUIRE( FILE=filename, EXIST=netcdf_extend )
754
755	IF ( netcdf_extend ) THEN
756	!
757	!-- Open an existing NetCDF file for output
758	IF ( netcdf_data_format < 3 ) THEN
759	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
760	ELSE
761	#if defined( __netcdf4 )
762	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
763	COMM = comm2d, INFO = MPI_INFO_NULL )
764	#endif
765	ENDIF
766
767	CALL handle_netcdf_error( 'check_open', 20 )
768	!
769	!-- Read header information and set all ids. If there is a mismatch
770	!-- between the previuos and the actual run, netcdf_extend is returned
771	!-- as .FALSE.
772	CALL define_netcdf_header( 'xy', netcdf_extend, av )
773
774	!
775	!-- Remove the local file, if it can not be extended
776	IF ( .NOT. netcdf_extend ) THEN
777	nc_stat = NF90_CLOSE( id_set_xy(av) )
778	CALL handle_netcdf_error( 'check_open', 21 )
779	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
780	ENDIF
781
782	ENDIF
783
784	IF ( .NOT. netcdf_extend ) THEN
785	!
786	!-- Create a new NetCDF output file with requested NetCDF format
787	IF ( netcdf_data_format == 1 ) THEN
788	!
789	!-- Classic NetCDF format
790	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
791
792	ELSEIF ( netcdf_data_format == 2 ) THEN
793	!
794	!-- 64bit-offset format
795	nc_stat = NF90_CREATE( filename, &
796	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
797	id_set_xy(av) )
798
799	#if defined( __netcdf4 )
800	ELSEIF ( netcdf_data_format == 3 ) THEN
801	!
802	!-- NetCDF4/HDF5 format
803	nc_stat = NF90_CREATE( filename, &
804	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
805	id_set_xy(av), COMM = comm2d, &
806	INFO = MPI_INFO_NULL )
807
808	ELSEIF ( netcdf_data_format == 4 ) THEN
809	!
810	!-- NetCDF4/HDF5 format with classic model flag
811	nc_stat = NF90_CREATE( filename, &
812	OR( NF90_NOCLOBBER, &
813	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
814	id_set_xy(av), COMM = comm2d, &
815	INFO = MPI_INFO_NULL )
816	#endif
817	ENDIF
818
819	CALL handle_netcdf_error( 'check_open', 22 )
820
821	!
822	!-- Define the header
823	CALL define_netcdf_header( 'xy', netcdf_extend, av )
824
825	!
826	!-- In case of parallel NetCDF output, create flag file which tells
827	!-- combine_plot_fields that nothing is to do.
828	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
829	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
830	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
831	CLOSE( 99 )
832	ENDIF
833
834	ENDIF
835
836	CASE ( 102, 112 )
837	!
838	!-- Set filename depending on unit number
839	IF ( file_id == 102 ) THEN
840	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
841	av = 0
842	ELSE
843	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
844	av = 1
845	ENDIF
846	!
847	!-- Inquire, if there is a NetCDF file from a previuos run. This should
848	!-- be opened for extension, if its dimensions and variables match the
849	!-- actual run.
850	INQUIRE( FILE=filename, EXIST=netcdf_extend )
851
852	IF ( netcdf_extend ) THEN
853	!
854	!-- Open an existing NetCDF file for output
855	IF ( netcdf_data_format < 3 ) THEN
856	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
857	ELSE
858	#if defined( __netcdf4 )
859	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
860	COMM = comm2d, INFO = MPI_INFO_NULL )
861	#endif
862	ENDIF
863
864	CALL handle_netcdf_error( 'check_open', 23 )
865	!
866	!-- Read header information and set all ids. If there is a mismatch
867	!-- between the previuos and the actual run, netcdf_extend is returned
868	!-- as .FALSE.
869	CALL define_netcdf_header( 'xz', netcdf_extend, av )
870
871	!
872	!-- Remove the local file, if it can not be extended
873	IF ( .NOT. netcdf_extend ) THEN
874	nc_stat = NF90_CLOSE( id_set_xz(av) )
875	CALL handle_netcdf_error( 'check_open', 24 )
876	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
877	ENDIF
878
879	ENDIF
880
881	IF ( .NOT. netcdf_extend ) THEN
882	!
883	!-- Create a new NetCDF output file with requested NetCDF format
884	IF ( netcdf_data_format == 1 ) THEN
885	!
886	!-- Classic NetCDF format
887	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
888
889	ELSEIF ( netcdf_data_format == 2 ) THEN
890	!
891	!-- 64bit-offset format
892	nc_stat = NF90_CREATE( filename, &
893	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
894	id_set_xz(av) )
895
896	#if defined( __netcdf4 )
897	ELSEIF ( netcdf_data_format == 3 ) THEN
898	!
899	!-- NetCDF4/HDF5 format
900	nc_stat = NF90_CREATE( filename, &
901	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
902	id_set_xz(av), COMM = comm2d, &
903	INFO = MPI_INFO_NULL )
904
905	ELSEIF ( netcdf_data_format == 4 ) THEN
906	!
907	!-- NetCDF4/HDF5 format with classic model flag
908	nc_stat = NF90_CREATE( filename, &
909	OR( NF90_NOCLOBBER, &
910	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
911	id_set_xz(av), COMM = comm2d, &
912	INFO = MPI_INFO_NULL )
913	#endif
914	ENDIF
915
916	CALL handle_netcdf_error( 'check_open', 25 )
917
918	!
919	!-- Define the header
920	CALL define_netcdf_header( 'xz', netcdf_extend, av )
921
922	!
923	!-- In case of parallel NetCDF output, create flag file which tells
924	!-- combine_plot_fields that nothing is to do.
925	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
926	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
927	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
928	CLOSE( 99 )
929	ENDIF
930
931	ENDIF
932
933	CASE ( 103, 113 )
934	!
935	!-- Set filename depending on unit number
936	IF ( file_id == 103 ) THEN
937	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
938	av = 0
939	ELSE
940	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
941	av = 1
942	ENDIF
943	!
944	!-- Inquire, if there is a NetCDF file from a previuos run. This should
945	!-- be opened for extension, if its dimensions and variables match the
946	!-- actual run.
947	INQUIRE( FILE=filename, EXIST=netcdf_extend )
948
949	IF ( netcdf_extend ) THEN
950	!
951	!-- Open an existing NetCDF file for output
952	IF ( netcdf_data_format < 3 ) THEN
953	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
954	ELSE
955	#if defined( __netcdf4 )
956	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
957	COMM = comm2d, INFO = MPI_INFO_NULL )
958	#endif
959	ENDIF
960
961	CALL handle_netcdf_error( 'check_open', 26 )
962	!
963	!-- Read header information and set all ids. If there is a mismatch
964	!-- between the previuos and the actual run, netcdf_extend is returned
965	!-- as .FALSE.
966	CALL define_netcdf_header( 'yz', netcdf_extend, av )
967
968	!
969	!-- Remove the local file, if it can not be extended
970	IF ( .NOT. netcdf_extend ) THEN
971	nc_stat = NF90_CLOSE( id_set_yz(av) )
972	CALL handle_netcdf_error( 'check_open', 27 )
973	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
974	ENDIF
975
976	ENDIF
977
978	IF ( .NOT. netcdf_extend ) THEN
979	!
980	!-- Create a new NetCDF output file with requested NetCDF format
981	IF ( netcdf_data_format == 1 ) THEN
982	!
983	!-- Classic NetCDF format
984	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
985
986	ELSEIF ( netcdf_data_format == 2 ) THEN
987	!
988	!-- 64bit-offset format
989	nc_stat = NF90_CREATE( filename, &
990	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
991	id_set_yz(av) )
992
993	#if defined( __netcdf4 )
994	ELSEIF ( netcdf_data_format == 3 ) THEN
995	!
996	!-- NetCDF4/HDF5 format
997	nc_stat = NF90_CREATE( filename, &
998	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
999	id_set_yz(av), COMM = comm2d, &
1000	INFO = MPI_INFO_NULL )
1001
1002	ELSEIF ( netcdf_data_format == 4 ) THEN
1003	!
1004	!-- NetCDF4/HDF5 format with classic model flag
1005	nc_stat = NF90_CREATE( filename, &
1006	OR( NF90_NOCLOBBER, &
1007	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1008	id_set_yz(av), COMM = comm2d, &
1009	INFO = MPI_INFO_NULL )
1010	#endif
1011	ENDIF
1012
1013	CALL handle_netcdf_error( 'check_open', 28 )
1014
1015	!
1016	!-- Define the header
1017	CALL define_netcdf_header( 'yz', netcdf_extend, av )
1018
1019	!
1020	!-- In case of parallel NetCDF output, create flag file which tells
1021	!-- combine_plot_fields that nothing is to do.
1022	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1023	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
1024	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1025	CLOSE( 99 )
1026	ENDIF
1027
1028	ENDIF
1029
1030	CASE ( 104 )
1031	!
1032	!-- Set filename
1033	filename = 'DATA_1D_PR_NETCDF' // coupling_char
1034
1035	!
1036	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1037	!-- be opened for extension, if its variables match the actual run.
1038	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1039
1040	IF ( netcdf_extend ) THEN
1041	!
1042	!-- Open an existing NetCDF file for output
1043	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
1044	CALL handle_netcdf_error( 'check_open', 29 )
1045	!
1046	!-- Read header information and set all ids. If there is a mismatch
1047	!-- between the previuos and the actual run, netcdf_extend is returned
1048	!-- as .FALSE.
1049	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1050
1051	!
1052	!-- Remove the local file, if it can not be extended
1053	IF ( .NOT. netcdf_extend ) THEN
1054	nc_stat = NF90_CLOSE( id_set_pr )
1055	CALL handle_netcdf_error( 'check_open', 30 )
1056	CALL local_system( 'rm ' // TRIM( filename ) )
1057	ENDIF
1058
1059	ENDIF
1060
1061	IF ( .NOT. netcdf_extend ) THEN
1062	!
1063	!-- Create a new NetCDF output file
1064	IF ( netcdf_data_format > 1 ) THEN
1065	nc_stat = NF90_CREATE( filename, &
1066	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1067	id_set_pr )
1068	ELSE
1069	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1070	ENDIF
1071	CALL handle_netcdf_error( 'check_open', 31 )
1072	!
1073	!-- Define the header
1074	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1075
1076	ENDIF
1077
1078	CASE ( 105 )
1079	!
1080	!-- Set filename
1081	filename = 'DATA_1D_TS_NETCDF' // coupling_char
1082
1083	!
1084	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1085	!-- be opened for extension, if its variables match the actual run.
1086	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1087
1088	IF ( netcdf_extend ) THEN
1089	!
1090	!-- Open an existing NetCDF file for output
1091	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1092	CALL handle_netcdf_error( 'check_open', 32 )
1093	!
1094	!-- Read header information and set all ids. If there is a mismatch
1095	!-- between the previuos and the actual run, netcdf_extend is returned
1096	!-- as .FALSE.
1097	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1098
1099	!
1100	!-- Remove the local file, if it can not be extended
1101	IF ( .NOT. netcdf_extend ) THEN
1102	nc_stat = NF90_CLOSE( id_set_ts )
1103	CALL handle_netcdf_error( 'check_open', 33 )
1104	CALL local_system( 'rm ' // TRIM( filename ) )
1105	ENDIF
1106
1107	ENDIF
1108
1109	IF ( .NOT. netcdf_extend ) THEN
1110	!
1111	!-- Create a new NetCDF output file
1112	IF ( netcdf_data_format > 1 ) THEN
1113	nc_stat = NF90_CREATE( filename, &
1114	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1115	id_set_ts )
1116	ELSE
1117	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1118	ENDIF
1119	CALL handle_netcdf_error( 'check_open', 34 )
1120	!
1121	!-- Define the header
1122	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1123
1124	ENDIF
1125
1126
1127	CASE ( 106, 116 )
1128	!
1129	!-- Set filename depending on unit number
1130	IF ( file_id == 106 ) THEN
1131	filename = 'DATA_3D_NETCDF' // coupling_char
1132	av = 0
1133	ELSE
1134	filename = 'DATA_3D_AV_NETCDF' // coupling_char
1135	av = 1
1136	ENDIF
1137	!
1138	!-- Inquire, if there is a NetCDF file from a previous run. This should
1139	!-- be opened for extension, if its dimensions and variables match the
1140	!-- actual run.
1141	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1142
1143	IF ( netcdf_extend ) THEN
1144	!
1145	!-- Open an existing NetCDF file for output
1146	IF ( netcdf_data_format < 3 ) THEN
1147	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1148	ELSE
1149	#if defined( __netcdf4 )
1150	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1151	COMM = comm2d, INFO = MPI_INFO_NULL )
1152	#endif
1153	ENDIF
1154	CALL handle_netcdf_error( 'check_open', 35 )
1155	!
1156	!-- Read header information and set all ids. If there is a mismatch
1157	!-- between the previuos and the actual run, netcdf_extend is returned
1158	!-- as .FALSE.
1159	CALL define_netcdf_header( '3d', netcdf_extend, av )
1160
1161	!
1162	!-- Remove the local file, if it can not be extended
1163	IF ( .NOT. netcdf_extend ) THEN
1164	nc_stat = NF90_CLOSE( id_set_3d(av) )
1165	CALL handle_netcdf_error( 'check_open', 36 )
1166	CALL local_system('rm ' // TRIM( filename ) )
1167	ENDIF
1168
1169	ENDIF
1170
1171	IF ( .NOT. netcdf_extend ) THEN
1172	!
1173	!-- Create a new NetCDF output file with requested NetCDF format
1174	IF ( netcdf_data_format == 1 ) THEN
1175	!
1176	!-- Classic NetCDF format
1177	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1178
1179	ELSEIF ( netcdf_data_format == 2 ) THEN
1180	!
1181	!-- 64bit-offset format
1182	nc_stat = NF90_CREATE( filename, &
1183	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1184	id_set_3d(av) )
1185
1186	#if defined( __netcdf4 )
1187	ELSEIF ( netcdf_data_format == 3 ) THEN
1188	!
1189	!-- NetCDF4/HDF5 format
1190	nc_stat = NF90_CREATE( filename, &
1191	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1192	id_set_3d(av), COMM = comm2d, &
1193	INFO = MPI_INFO_NULL )
1194
1195	ELSEIF ( netcdf_data_format == 4 ) THEN
1196	!
1197	!-- NetCDF4/HDF5 format with classic model flag
1198	nc_stat = NF90_CREATE( filename, &
1199	OR( NF90_NOCLOBBER, &
1200	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1201	id_set_3d(av), COMM = comm2d, &
1202	INFO = MPI_INFO_NULL )
1203	#endif
1204	ENDIF
1205
1206	CALL handle_netcdf_error( 'check_open', 37 )
1207
1208	!
1209	!-- Define the header
1210	CALL define_netcdf_header( '3d', netcdf_extend, av )
1211
1212	!
1213	!-- In case of parallel NetCDF output, create flag file which tells
1214	!-- combine_plot_fields that nothing is to do.
1215	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1216	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1217	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1218	CLOSE( 99 )
1219	ENDIF
1220
1221	ENDIF
1222
1223
1224	CASE ( 107 )
1225	!
1226	!-- Set filename
1227	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1228
1229	!
1230	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1231	!-- be opened for extension, if its variables match the actual run.
1232	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1233
1234	IF ( netcdf_extend ) THEN
1235	!
1236	!-- Open an existing NetCDF file for output
1237	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1238	CALL handle_netcdf_error( 'check_open', 38 )
1239
1240	!
1241	!-- Read header information and set all ids. If there is a mismatch
1242	!-- between the previuos and the actual run, netcdf_extend is returned
1243	!-- as .FALSE.
1244	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1245
1246	!
1247	!-- Remove the local file, if it can not be extended
1248	IF ( .NOT. netcdf_extend ) THEN
1249	nc_stat = NF90_CLOSE( id_set_sp )
1250	CALL handle_netcdf_error( 'check_open', 39 )
1251	CALL local_system( 'rm ' // TRIM( filename ) )
1252	ENDIF
1253
1254	ENDIF
1255
1256	IF ( .NOT. netcdf_extend ) THEN
1257	!
1258	!-- Create a new NetCDF output file
1259	IF ( netcdf_data_format > 1 ) THEN
1260	nc_stat = NF90_CREATE( filename, &
1261	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1262	id_set_sp )
1263	ELSE
1264	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1265	ENDIF
1266	CALL handle_netcdf_error( 'check_open', 40 )
1267	!
1268	!-- Define the header
1269	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1270
1271	ENDIF
1272
1273
1274	CASE ( 108 )
1275
1276	IF ( myid_char == '' ) THEN
1277	filename = 'DATA_PRT_NETCDF' // coupling_char
1278	ELSE
1279	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1280	myid_char
1281	ENDIF
1282	!
1283	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1284	!-- be opened for extension, if its variables match the actual run.
1285	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1286
1287	IF ( netcdf_extend ) THEN
1288	!
1289	!-- Open an existing NetCDF file for output
1290	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1291	CALL handle_netcdf_error( 'check_open', 41 )
1292	!
1293	!-- Read header information and set all ids. If there is a mismatch
1294	!-- between the previuos and the actual run, netcdf_extend is returned
1295	!-- as .FALSE.
1296	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1297
1298	!
1299	!-- Remove the local file, if it can not be extended
1300	IF ( .NOT. netcdf_extend ) THEN
1301	nc_stat = NF90_CLOSE( id_set_prt )
1302	CALL handle_netcdf_error( 'check_open', 42 )
1303	CALL local_system( 'rm ' // filename )
1304	ENDIF
1305
1306	ENDIF
1307
1308	IF ( .NOT. netcdf_extend ) THEN
1309
1310	!
1311	!-- For runs on multiple processors create the subdirectory
1312	IF ( myid_char /= '' ) THEN
1313	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1314	THEN ! needs modification in case of non-extendable sets
1315	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1316	TRIM( coupling_char ) // '/' )
1317	ENDIF
1318	#if defined( __parallel ) && ! defined ( __check )
1319	!
1320	!-- Set a barrier in order to allow that all other processors in the
1321	!-- directory created by PE0 can open their file
1322	CALL MPI_BARRIER( comm2d, ierr )
1323	#endif
1324	ENDIF
1325
1326	!
1327	!-- Create a new NetCDF output file with requested NetCDF format
1328	IF ( netcdf_data_format == 1 ) THEN
1329	!
1330	!-- Classic NetCDF format
1331	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1332
1333	ELSEIF ( netcdf_data_format == 2 ) THEN
1334	!
1335	!-- 64bit-offset format
1336	nc_stat = NF90_CREATE( filename, &
1337	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1338	id_set_prt )
1339
1340	#if defined( __netcdf4 )
1341	ELSEIF ( netcdf_data_format == 3 ) THEN
1342	!
1343	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
1344	nc_stat = NF90_CREATE( filename, &
1345	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1346	id_set_prt )
1347
1348	ELSEIF ( netcdf_data_format == 4 ) THEN
1349	!
1350	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
1351	!-- output into a single file!
1352	nc_stat = NF90_CREATE( filename, &
1353	OR( NF90_NOCLOBBER, &
1354	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1355	id_set_prt )
1356	#endif
1357	ENDIF
1358
1359	CALL handle_netcdf_error( 'check_open', 43 )
1360
1361	!
1362	!-- Define the header
1363	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1364
1365	ENDIF
1366
1367	CASE ( 109 )
1368	!
1369	!-- Set filename
1370	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1371
1372	!
1373	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1374	!-- be opened for extension, if its variables match the actual run.
1375	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1376
1377	IF ( netcdf_extend ) THEN
1378	!
1379	!-- Open an existing NetCDF file for output
1380	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1381	CALL handle_netcdf_error( 'check_open', 393 )
1382	!
1383	!-- Read header information and set all ids. If there is a mismatch
1384	!-- between the previuos and the actual run, netcdf_extend is returned
1385	!-- as .FALSE.
1386	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1387
1388	!
1389	!-- Remove the local file, if it can not be extended
1390	IF ( .NOT. netcdf_extend ) THEN
1391	nc_stat = NF90_CLOSE( id_set_pts )
1392	CALL handle_netcdf_error( 'check_open', 394 )
1393	CALL local_system( 'rm ' // TRIM( filename ) )
1394	ENDIF
1395
1396	ENDIF
1397
1398	IF ( .NOT. netcdf_extend ) THEN
1399	!
1400	!-- Create a new NetCDF output file
1401	IF ( netcdf_data_format > 1 ) THEN
1402	nc_stat = NF90_CREATE( filename, &
1403	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1404	id_set_pts )
1405	ELSE
1406	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1407	ENDIF
1408	CALL handle_netcdf_error( 'check_open', 395 )
1409	!
1410	!-- Define the header
1411	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1412
1413	ENDIF
1414
1415	CASE ( 201:200+2*max_masks )
1416	!
1417	!-- Set filename depending on unit number
1418	IF ( file_id <= 200+max_masks ) THEN
1419	mid = file_id - 200
1420	WRITE ( mask_char,'(I2.2)') mid
1421	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1422	av = 0
1423	ELSE
1424	mid = file_id - (200+max_masks)
1425	WRITE ( mask_char,'(I2.2)') mid
1426	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1427	coupling_char
1428	av = 1
1429	ENDIF
1430	!
1431	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1432	!-- be opened for extension, if its dimensions and variables match the
1433	!-- actual run.
1434	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1435
1436	IF ( netcdf_extend ) THEN
1437	!
1438	!-- Open an existing NetCDF file for output
1439	#if defined( __netcdf4 )
1440	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1441	COMM = comm2d, INFO = MPI_INFO_NULL )
1442	#else
1443	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1444	#endif
1445	CALL handle_netcdf_error( 'check_open', 456 )
1446	!
1447	!-- Read header information and set all ids. If there is a mismatch
1448	!-- between the previuos and the actual run, netcdf_extend is returned
1449	!-- as .FALSE.
1450	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1451
1452	!
1453	!-- Remove the local file, if it can not be extended
1454	IF ( .NOT. netcdf_extend ) THEN
1455	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1456	CALL handle_netcdf_error( 'check_open', 457 )
1457	CALL local_system('rm ' // TRIM( filename ) )
1458	ENDIF
1459
1460	ENDIF
1461
1462	IF ( .NOT. netcdf_extend ) THEN
1463	!
1464	!-- Create a new NetCDF output file with requested NetCDF format
1465	IF ( netcdf_data_format == 1 ) THEN
1466	!
1467	!-- Classic NetCDF format
1468	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1469	id_set_mask(mid,av) )
1470
1471	ELSEIF ( netcdf_data_format == 2 ) THEN
1472	!
1473	!-- 64bit-offset format
1474	nc_stat = NF90_CREATE( filename, &
1475	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1476	id_set_mask(mid,av) )
1477
1478
1479	#if defined( __netcdf4 )
1480	ELSEIF ( netcdf_data_format == 3 ) THEN
1481	!
1482	!-- NetCDF4/HDF5 format
1483	nc_stat = NF90_CREATE( filename, &
1484	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1485	id_set_mask(mid,av), COMM = comm2d, &
1486	INFO = MPI_INFO_NULL )
1487
1488	ELSEIF ( netcdf_data_format == 4 ) THEN
1489	!
1490	!-- NetCDF4/HDF5 format with classic model flag
1491	nc_stat = NF90_CREATE( filename, &
1492	OR( NF90_NOCLOBBER, &
1493	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1494	id_set_mask(mid,av), COMM = comm2d, &
1495	INFO = MPI_INFO_NULL )
1496	#endif
1497	ENDIF
1498
1499	CALL handle_netcdf_error( 'check_open', 458 )
1500	!
1501	!-- Define the header
1502	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1503
1504	ENDIF
1505
1506
1507	#else
1508
1509	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1510
1511	!
1512	!-- Nothing is done in case of missing netcdf support
1513	RETURN
1514
1515	#endif
1516
1517	CASE DEFAULT
1518
1519	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1520	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1521
1522	END SELECT
1523
1524	!
1525	!-- Set open flag
1526	openfile(file_id)%opened = .TRUE.
1527
1528	!
1529	!-- Formats
1530	3300 FORMAT ('#'/ &
1531	'coord 1 file=',A,' filetype=unformatted'/ &
1532	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1533	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1534	'#')
1535	4000 FORMAT ('# ',A)
1536	5000 FORMAT ('# ',A/ &
1537	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1538	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1539	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1540	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1541	8000 FORMAT (A/ &
1542	' step time # of parts lPE sent/recv rPE sent/recv ',&
1543	'sPE sent/recv nPE sent/recv max # of parts'/ &
1544	103('-'))
1545
1546	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 849

Download in other formats: