Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 835

Last change on this file since 835 was 810, checked in by maronga, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 56.8 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_open.f90 810 2012-01-30 13:40:12Z raasch $
11	!
12	! 809 2012-01-30 13:32:58Z maronga
13	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
14	!
15	! 807 2012-01-25 11:53:51Z maronga
16	! New cpp directive "__check" implemented which is used by check_namelist_files
17	!
18	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
19	!
20	! 667 2010-12-23 12:06:00Z suehring/gryschka
21	! Output of total array size was adapted to nbgp.
22	!
23	! 600 2010-11-24 16:10:51Z raasch
24	! bugfix in opening of cross section netcdf-files (parallel opening with
25	! netcdf4 only works for netcdf_data_format > 2)
26	!
27	! 564 2010-09-30 13:18:59Z helmke
28	! start number of mask output files changed to 201, netcdf message identifiers
29	! of masked output changed
30	!
31	! 519 2010-03-19 05:30:02Z raasch
32	! NetCDF4 support for particle data
33	!
34	! 493 2010-03-01 08:30:24Z raasch
35	! NetCDF4 support (parallel output)
36	!
37	! 410 2009-12-04 17:05:40Z letzel
38	! masked data output
39	!
40	! 277 2009-03-31 09:13:47Z heinze
41	! Output of NetCDF messages with aid of message handling routine.
42	! Output of messages replaced by message handling routine
43	!
44	! 146 2008-01-17 13:08:34Z raasch
45	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
46	! because only this file contains the global variables,
47	! myid_char_14 removed
48	!
49	! 120 2007-10-17 11:54:43Z raasch
50	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
51	!
52	! 105 2007-08-08 07:12:55Z raasch
53	! Different filenames are used in case of a coupled simulation,
54	! coupling_char added to all relevant filenames
55	!
56	! 82 2007-04-16 15:40:52Z raasch
57	! Call of local_getenv removed, preprocessor directives for old systems removed
58	!
59	! 46 2007-03-05 06:00:47Z raasch
60	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
61	!
62	! RCS Log replace by Id keyword, revision history cleaned up
63	!
64	! Revision 1.44 2006/08/22 13:48:34 raasch
65	! xz and yz cross sections now up to nzt+1
66	!
67	! Revision 1.1 1997/08/11 06:10:55 raasch
68	! Initial revision
69	!
70	!
71	! Description:
72	! ------------
73	! Check if file unit is open. If not, open file and, if necessary, write a
74	! header or start other initializing actions, respectively.
75	!------------------------------------------------------------------------------!
76
77	USE array_kind
78	USE arrays_3d
79	USE control_parameters
80	USE grid_variables
81	USE indices
82	USE netcdf_control
83	USE particle_attributes
84	USE pegrid
85	USE profil_parameter
86	USE statistics
87
88	IMPLICIT NONE
89
90	CHARACTER (LEN=2) :: mask_char, suffix
91	CHARACTER (LEN=20) :: xtext = 'time in s'
92	CHARACTER (LEN=30) :: filename
93	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
94	avs_data_file_localname
95	CHARACTER (LEN=80) :: rtext
96	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
97	batch_scp, zeile
98	CHARACTER (LEN=400) :: command
99
100	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
101	j, k, legpos = 1, timodex = 1
102	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
103
104	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
105	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
106	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
107
108	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
109	sizex = 250.0, sizey = 40.0, texfac = 1.5
110
111	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
112	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
113
114
115	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
116	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
117	rand, rlegfak, sizex, sizey, texfac, &
118	timodex, twoxa, twoya, xtext
119
120
121	!
122	!-- Immediate return if file already open
123	IF ( openfile(file_id)%opened ) RETURN
124
125	#if ! defined ( __check )
126	!
127	!-- Only certain files are allowed to be re-opened
128	!-- NOTE: some of the other files perhaps also could be re-opened, but it
129	!-- has not been checked so far, if it works!
130	IF ( openfile(file_id)%opened_before ) THEN
131	SELECT CASE ( file_id )
132	CASE ( 13, 14, 21, 22, 23, 80:85 )
133	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
134	message_string = 're-open of unit ' // &
135	'14 is not verified. Please check results!'
136	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
137	ENDIF
138
139	CASE DEFAULT
140	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
141	' is not allowed'
142	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
143
144	RETURN
145
146	END SELECT
147	ENDIF
148	#endif
149
150	!
151	!-- Check if file may be opened on the relevant PE
152	SELECT CASE ( file_id )
153
154	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
155
156	IF ( myid /= 0 ) THEN
157	WRITE( message_string, * ) 'opening file-id ',file_id, &
158	' not allowed for PE ',myid
159	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
160	ENDIF
161
162	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
163
164	IF ( netcdf_data_format < 3 ) THEN
165
166	IF ( myid /= 0 ) THEN
167	WRITE( message_string, * ) 'opening file-id ',file_id, &
168	' not allowed for PE ',myid
169	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
170	ENDIF
171
172	ENDIF
173
174	CASE ( 21, 22, 23 )
175
176	IF ( .NOT. data_output_2d_on_each_pe ) THEN
177	IF ( myid /= 0 ) THEN
178	WRITE( message_string, * ) 'opening file-id ',file_id, &
179	' not allowed for PE ',myid
180	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
181	END IF
182	ENDIF
183
184	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
185
186	!
187	!-- File-ids that are used temporarily in other routines
188	WRITE( message_string, * ) 'opening file-id ',file_id, &
189	' is not allowed since it is used otherwise'
190	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
191
192	END SELECT
193
194	!
195	!-- Open relevant files
196	SELECT CASE ( file_id )
197
198	CASE ( 11 )
199
200	#if defined ( __check )
201	!
202	!-- In case of a prior parameter file check, the p3d data is stored in
203	!-- PARIN, while the p3df is stored in PARINF. This only applies to
204	!-- check_namelist_files!
205	IF ( check_restart == 2 ) THEN
206	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
207	STATUS='OLD' )
208	ELSE
209	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
210	STATUS='OLD' )
211	END IF
212	#else
213
214	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
215	STATUS='OLD' )
216	#endif
217
218	CASE ( 13 )
219
220	IF ( myid_char == '' ) THEN
221	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
222	FORM='UNFORMATTED', STATUS='OLD' )
223	ELSE
224	!
225	!-- First opening of unit 13 openes file _0000 on all PEs because only
226	!-- this file contains the global variables
227	IF ( .NOT. openfile(file_id)%opened_before ) THEN
228	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
229	FORM='UNFORMATTED', STATUS='OLD' )
230	ELSE
231	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
232	FORM='UNFORMATTED', STATUS='OLD' )
233	ENDIF
234	ENDIF
235
236	CASE ( 14 )
237
238	IF ( myid_char == '' ) THEN
239	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
240	FORM='UNFORMATTED', POSITION='APPEND' )
241	ELSE
242	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
243	CALL local_system( 'mkdir BINOUT' // coupling_char )
244	ENDIF
245	#if defined( __parallel ) && ! defined ( __check )
246	!
247	!-- Set a barrier in order to allow that all other processors in the
248	!-- directory created by PE0 can open their file
249	CALL MPI_BARRIER( comm2d, ierr )
250	#endif
251	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
252	FORM='UNFORMATTED', POSITION='APPEND' )
253	ENDIF
254
255	CASE ( 15 )
256
257	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
258
259	CASE ( 16 )
260
261	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
262
263	CASE ( 17 )
264
265	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
266
267	CASE ( 18 )
268
269	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
270
271	CASE ( 19 )
272
273	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
274
275	CASE ( 20 )
276
277	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
278	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
279	ENDIF
280	IF ( myid_char == '' ) THEN
281	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
282	FORM='UNFORMATTED', POSITION='APPEND' )
283	ELSE
284	#if defined( __parallel ) && ! defined ( __check )
285	!
286	!-- Set a barrier in order to allow that all other processors in the
287	!-- directory created by PE0 can open their file
288	CALL MPI_BARRIER( comm2d, ierr )
289	#endif
290	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
291	FORM='UNFORMATTED', POSITION='APPEND' )
292	ENDIF
293
294	CASE ( 21 )
295
296	IF ( data_output_2d_on_each_pe ) THEN
297	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
298	FORM='UNFORMATTED', POSITION='APPEND' )
299	ELSE
300	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
301	FORM='UNFORMATTED', POSITION='APPEND' )
302	ENDIF
303
304	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
305	!
306	!-- Output for combine_plot_fields
307	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
308	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
309	WRITE (21) 0, nx+1, 0, ny+1 ! output part
310	ENDIF
311	!
312	!-- Determine and write ISO2D coordiante header
313	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
314	hu = 0.0
315	ho = (ny+1) * dy
316	DO i = 1, ny
317	eta(i) = REAL( i ) / ( ny + 1.0 )
318	ENDDO
319	eta(0) = 0.0
320	eta(ny+1) = 1.0
321
322	WRITE (21) dx,eta,hu,ho
323	DEALLOCATE( eta, ho, hu )
324
325	!
326	!-- Create output file for local parameters
327	IF ( iso2d_output ) THEN
328	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
329	FORM='FORMATTED', DELIM='APOSTROPHE' )
330	openfile(27)%opened = .TRUE.
331	ENDIF
332
333	ENDIF
334
335	CASE ( 22 )
336
337	IF ( data_output_2d_on_each_pe ) THEN
338	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
339	FORM='UNFORMATTED', POSITION='APPEND' )
340	ELSE
341	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
342	POSITION='APPEND' )
343	ENDIF
344
345	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
346	!
347	!-- Output for combine_plot_fields
348	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
349	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
350	WRITE (22) 0, nx+1, 0, nz+1 ! output part
351	ENDIF
352	!
353	!-- Determine and write ISO2D coordiante header
354	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
355	hu = 0.0
356	ho = zu(nz+1)
357	DO i = 1, nz
358	eta(i) = REAL( zu(i) ) / zu(nz+1)
359	ENDDO
360	eta(0) = 0.0
361	eta(nz+1) = 1.0
362
363	WRITE (22) dx,eta,hu,ho
364	DEALLOCATE( eta, ho, hu )
365	!
366	!-- Create output file for local parameters
367	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
368	FORM='FORMATTED', DELIM='APOSTROPHE' )
369	openfile(28)%opened = .TRUE.
370
371	ENDIF
372
373	CASE ( 23 )
374
375	IF ( data_output_2d_on_each_pe ) THEN
376	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
377	FORM='UNFORMATTED', POSITION='APPEND' )
378	ELSE
379	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
380	POSITION='APPEND' )
381	ENDIF
382
383	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
384	!
385	!-- Output for combine_plot_fields
386	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
387	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
388	WRITE (23) 0, ny+1, 0, nz+1 ! output part
389	ENDIF
390	!
391	!-- Determine and write ISO2D coordiante header
392	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
393	hu = 0.0
394	ho = zu(nz+1)
395	DO i = 1, nz
396	eta(i) = REAL( zu(i) ) / zu(nz+1)
397	ENDDO
398	eta(0) = 0.0
399	eta(nz+1) = 1.0
400
401	WRITE (23) dx,eta,hu,ho
402	DEALLOCATE( eta, ho, hu )
403	!
404	!-- Create output file for local parameters
405	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
406	FORM='FORMATTED', DELIM='APOSTROPHE' )
407	openfile(29)%opened = .TRUE.
408
409	ENDIF
410
411	CASE ( 30 )
412
413	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
414	FORM='UNFORMATTED' )
415	!
416	!-- Write coordinate file for AVS
417	IF ( myid == 0 ) THEN
418	#if defined( __parallel )
419	!
420	!-- Specifications for combine_plot_fields
421	IF ( .NOT. do3d_compress ) THEN
422	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
423	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
424	ENDIF
425	#endif
426	!
427	!-- Write coordinate file for AVS:
428	!-- First determine file names (including cyle numbers) of AVS files on
429	!-- target machine (to which the files are to be transferred).
430	!-- Therefore path information has to be obtained first.
431	IF ( avs_output ) THEN
432	iaddres = LEN_TRIM( return_addres )
433	iusern = LEN_TRIM( return_username )
434
435	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
436	DO WHILE ( .NOT. avs_coor_file_found .OR. &
437	.NOT. avs_data_file_found )
438
439	READ ( 3, '(A)', END=1 ) zeile
440
441	SELECT CASE ( zeile(1:11) )
442
443	CASE ( 'PLOT3D_COOR' )
444	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
445	avs_coor_file_localname
446	avs_coor_file_found = .TRUE.
447
448	CASE ( 'PLOT3D_DATA' )
449	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
450	avs_data_file_localname
451	avs_data_file_found = .TRUE.
452
453	CASE DEFAULT
454	READ ( 3, '(A/A)' ) zeile, zeile
455
456	END SELECT
457
458	ENDDO
459	!
460	!-- Now the cycle numbers on the remote machine must be obtained
461	!-- using batch_scp
462	1 CLOSE ( 3 )
463	IF ( .NOT. avs_coor_file_found .OR. &
464	.NOT. avs_data_file_found ) THEN
465	message_string= 'no filename for AVS-data-file ' // &
466	'found in MRUN-config-file' // &
467	' &filename in FLD-file set to "unknown"'
468	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
469
470	avs_coor_file = 'unknown'
471	avs_data_file = 'unknown'
472	ELSE
473	get_filenames = .TRUE.
474	IF ( TRIM( host ) == 'hpmuk' .OR. &
475	TRIM( host ) == 'lcmuk' ) THEN
476	batch_scp = '/home/raasch/pub/batch_scp'
477	ELSEIF ( TRIM( host ) == 'nech' ) THEN
478	batch_scp = '/ipf/b/b323011/pub/batch_scp'
479	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
480	TRIM( host ) == 'ibmb' ) THEN
481	batch_scp = '/home/h/niksiraa/pub/batch_scp'
482	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
483	batch_scp = '/home/nhbksira/pub/batch_scp'
484	ELSE
485	message_string= 'no path for batch_scp on host "' // &
486	TRIM( host ) // '"'
487	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
488	get_filenames = .FALSE.
489	ENDIF
490
491	IF ( get_filenames ) THEN
492	!
493	!-- Determine the coordinate file name.
494	!-- /etc/passwd serves as Dummy-Datei, because it is not
495	!-- really transferred.
496	command = TRIM( batch_scp ) // ' -n -u ' // &
497	return_username(1:iusern) // ' ' // &
498	return_addres(1:iaddres) // ' /etc/passwd "' // &
499	TRIM( avs_coor_file_catalog ) // '" ' // &
500	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
501
502	CALL local_system( command )
503	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
504	READ ( 3, '(A)' ) avs_coor_file
505	CLOSE ( 3 )
506	!
507	!-- Determine the data file name
508	command = TRIM( batch_scp ) // ' -n -u ' // &
509	return_username(1:iusern) // ' ' // &
510	return_addres(1:iaddres) // ' /etc/passwd "' // &
511	TRIM( avs_data_file_catalog ) // '" ' // &
512	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
513
514	CALL local_system( command )
515	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
516	READ ( 3, '(A)' ) avs_data_file
517	CLOSE ( 3 )
518
519	ELSE
520
521	avs_coor_file = 'unknown'
522	avs_data_file = 'unknown'
523
524	ENDIF
525
526	ENDIF
527
528	!
529	!-- Output of the coordinate file description for FLD-file
530	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
531	openfile(33)%opened = .TRUE.
532	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
533	TRIM( avs_coor_file ), (nx+2nbgp)4, &
534	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
535
536
537	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
538	DO i = 0, nx+1
539	xkoor(i) = i * dx
540	ENDDO
541	DO j = 0, ny+1
542	ykoor(j) = j * dy
543	ENDDO
544	DO k = 0, nz_do3d
545	zkoor(k) = zu(k)
546	ENDDO
547
548	!
549	!-- Create and write on AVS coordinate file
550	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
551	openfile(31)%opened = .TRUE.
552
553	WRITE (31) xkoor, ykoor, zkoor
554	DEALLOCATE( xkoor, ykoor, zkoor )
555
556	!
557	!-- Create FLD file (being written on in close_file)
558	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
559	openfile(32)%opened = .TRUE.
560
561	!
562	!-- Create flag file for compressed 3D output,
563	!-- influences output commands in mrun
564	IF ( do3d_compress ) THEN
565	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
566	WRITE ( 3, '(1X)' )
567	CLOSE ( 3 )
568	ENDIF
569
570	ENDIF
571
572	ENDIF
573
574	!
575	!-- In case of data compression output of the coordinates of the
576	!-- corresponding partial array of a PE only once at the top of the file
577	IF ( avs_output .AND. do3d_compress ) THEN
578	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
579	ENDIF
580
581	CASE ( 40:49 )
582
583	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
584	suffix = ''
585	ELSE
586	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
587	ENDIF
588	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
589	TRIM( suffix ), &
590	FORM='FORMATTED' )
591	!
592	!-- Write contents comments at the top of the file
593	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
594	TRIM( region( file_id - 40 ) )
595
596	CASE ( 50:59 )
597
598	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
599	suffix = ''
600	ELSE
601	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
602	ENDIF
603	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
604	TRIM( suffix ), &
605	FORM='FORMATTED', RECL=496 )
606	!
607	!-- Write PROFIL parameter file for output of time series
608	!-- NOTE: To be on the safe side, this output is done at the beginning of
609	!-- the model run (in case of collapse) and it is repeated in
610	!-- close_file, then, however, with value ranges for the coordinate
611	!-- systems
612	!
613	!-- Firstly determine the number of the coordinate systems to be drawn
614	cranz = 0
615	DO j = 1, 10
616	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
617	ENDDO
618	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
619	TRIM( region( file_id - 50 ) )
620	!
621	!-- Write RAHMEN parameter
622	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
623	TRIM( suffix ), &
624	FORM='FORMATTED', DELIM='APOSTROPHE' )
625	WRITE ( 90, RAHMEN )
626	!
627	!-- Determine and write CROSS parameters for the individual coordinate
628	!-- systems
629	DO j = 1, 10
630	k = cross_ts_number_count(j)
631	IF ( k /= 0 ) THEN
632	!
633	!-- Store curve numbers, colours and line style
634	klist(1:k) = cross_ts_numbers(1:k,j)
635	klist(k+1:10) = 999999
636	cucol(1:k) = linecolors(1:k)
637	lstyle(1:k) = linestyles(1:k)
638	!
639	!-- Write CROSS parameter
640	WRITE ( 90, CROSS )
641
642	ENDIF
643	ENDDO
644
645	CLOSE ( 90 )
646	!
647	!-- Write all labels at the top of the data file, but only during the
648	!-- first run of a sequence of jobs. The following jobs copy the time
649	!-- series data to the bottom of that file.
650	IF ( runnr == 0 ) THEN
651	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
652	' ' // TRIM( region( file_id - 50 ) )
653	ENDIF
654
655
656	CASE ( 80 )
657
658	IF ( myid_char == '' ) THEN
659	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
660	FORM='FORMATTED', POSITION='APPEND' )
661	ELSE
662	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
663	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
664	ENDIF
665	#if defined( __parallel ) && ! defined ( __check )
666	!
667	!-- Set a barrier in order to allow that thereafter all other
668	!-- processors in the directory created by PE0 can open their file.
669	!-- WARNING: The following barrier will lead to hanging jobs, if
670	!-- check_open is first called from routine
671	!-- allocate_prt_memory!
672	IF ( .NOT. openfile(80)%opened_before ) THEN
673	CALL MPI_BARRIER( comm2d, ierr )
674	ENDIF
675	#endif
676	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
677	myid_char, &
678	FORM='FORMATTED', POSITION='APPEND' )
679	ENDIF
680
681	IF ( .NOT. openfile(80)%opened_before ) THEN
682	WRITE ( 80, 8000 ) TRIM( run_description_header )
683	ENDIF
684
685	CASE ( 81 )
686
687	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
688	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
689
690	CASE ( 82 )
691
692	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
693	POSITION = 'APPEND' )
694
695	CASE ( 83 )
696
697	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
698	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
699
700	CASE ( 84 )
701
702	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
703	POSITION='APPEND' )
704
705	CASE ( 85 )
706
707	IF ( myid_char == '' ) THEN
708	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
709	FORM='UNFORMATTED', POSITION='APPEND' )
710	ELSE
711	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
712	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
713	ENDIF
714	#if defined( __parallel ) && ! defined ( __check )
715	!
716	!-- Set a barrier in order to allow that thereafter all other
717	!-- processors in the directory created by PE0 can open their file
718	CALL MPI_BARRIER( comm2d, ierr )
719	#endif
720	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
721	myid_char, &
722	FORM='UNFORMATTED', POSITION='APPEND' )
723	ENDIF
724
725	IF ( .NOT. openfile(85)%opened_before ) THEN
726	WRITE ( 85 ) run_description_header
727	!
728	!-- Attention: change version number whenever the output format on
729	!-- unit 85 is changed (see also in routine advec_particles)
730	rtext = 'data format version 3.0'
731	WRITE ( 85 ) rtext
732	WRITE ( 85 ) number_of_particle_groups, &
733	max_number_of_particle_groups
734	WRITE ( 85 ) particle_groups
735	ENDIF
736
737	#if defined( __netcdf )
738	CASE ( 101, 111 )
739	!
740	!-- Set filename depending on unit number
741	IF ( file_id == 101 ) THEN
742	filename = 'DATA_2D_XY_NETCDF' // coupling_char
743	av = 0
744	ELSE
745	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
746	av = 1
747	ENDIF
748	!
749	!-- Inquire, if there is a NetCDF file from a previuos run. This should
750	!-- be opened for extension, if its dimensions and variables match the
751	!-- actual run.
752	INQUIRE( FILE=filename, EXIST=netcdf_extend )
753
754	IF ( netcdf_extend ) THEN
755	!
756	!-- Open an existing NetCDF file for output
757	IF ( netcdf_data_format < 3 ) THEN
758	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
759	ELSE
760	#if defined( __netcdf4 )
761	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
762	COMM = comm2d, INFO = MPI_INFO_NULL )
763	#endif
764	ENDIF
765
766	CALL handle_netcdf_error( 'check_open', 20 )
767	!
768	!-- Read header information and set all ids. If there is a mismatch
769	!-- between the previuos and the actual run, netcdf_extend is returned
770	!-- as .FALSE.
771	CALL define_netcdf_header( 'xy', netcdf_extend, av )
772
773	!
774	!-- Remove the local file, if it can not be extended
775	IF ( .NOT. netcdf_extend ) THEN
776	nc_stat = NF90_CLOSE( id_set_xy(av) )
777	CALL handle_netcdf_error( 'check_open', 21 )
778	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
779	ENDIF
780
781	ENDIF
782
783	IF ( .NOT. netcdf_extend ) THEN
784	!
785	!-- Create a new NetCDF output file with requested NetCDF format
786	IF ( netcdf_data_format == 1 ) THEN
787	!
788	!-- Classic NetCDF format
789	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
790
791	ELSEIF ( netcdf_data_format == 2 ) THEN
792	!
793	!-- 64bit-offset format
794	nc_stat = NF90_CREATE( filename, &
795	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
796	id_set_xy(av) )
797
798	#if defined( __netcdf4 )
799	ELSEIF ( netcdf_data_format == 3 ) THEN
800	!
801	!-- NetCDF4/HDF5 format
802	nc_stat = NF90_CREATE( filename, &
803	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
804	id_set_xy(av), COMM = comm2d, &
805	INFO = MPI_INFO_NULL )
806
807	ELSEIF ( netcdf_data_format == 4 ) THEN
808	!
809	!-- NetCDF4/HDF5 format with classic model flag
810	nc_stat = NF90_CREATE( filename, &
811	OR( NF90_NOCLOBBER, &
812	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
813	id_set_xy(av), COMM = comm2d, &
814	INFO = MPI_INFO_NULL )
815	#endif
816	ENDIF
817
818	CALL handle_netcdf_error( 'check_open', 22 )
819
820	!
821	!-- Define the header
822	CALL define_netcdf_header( 'xy', netcdf_extend, av )
823
824	!
825	!-- In case of parallel NetCDF output, create flag file which tells
826	!-- combine_plot_fields that nothing is to do.
827	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
828	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
829	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
830	CLOSE( 99 )
831	ENDIF
832
833	ENDIF
834
835	CASE ( 102, 112 )
836	!
837	!-- Set filename depending on unit number
838	IF ( file_id == 102 ) THEN
839	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
840	av = 0
841	ELSE
842	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
843	av = 1
844	ENDIF
845	!
846	!-- Inquire, if there is a NetCDF file from a previuos run. This should
847	!-- be opened for extension, if its dimensions and variables match the
848	!-- actual run.
849	INQUIRE( FILE=filename, EXIST=netcdf_extend )
850
851	IF ( netcdf_extend ) THEN
852	!
853	!-- Open an existing NetCDF file for output
854	IF ( netcdf_data_format < 3 ) THEN
855	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
856	ELSE
857	#if defined( __netcdf4 )
858	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
859	COMM = comm2d, INFO = MPI_INFO_NULL )
860	#endif
861	ENDIF
862
863	CALL handle_netcdf_error( 'check_open', 23 )
864	!
865	!-- Read header information and set all ids. If there is a mismatch
866	!-- between the previuos and the actual run, netcdf_extend is returned
867	!-- as .FALSE.
868	CALL define_netcdf_header( 'xz', netcdf_extend, av )
869
870	!
871	!-- Remove the local file, if it can not be extended
872	IF ( .NOT. netcdf_extend ) THEN
873	nc_stat = NF90_CLOSE( id_set_xz(av) )
874	CALL handle_netcdf_error( 'check_open', 24 )
875	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
876	ENDIF
877
878	ENDIF
879
880	IF ( .NOT. netcdf_extend ) THEN
881	!
882	!-- Create a new NetCDF output file with requested NetCDF format
883	IF ( netcdf_data_format == 1 ) THEN
884	!
885	!-- Classic NetCDF format
886	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
887
888	ELSEIF ( netcdf_data_format == 2 ) THEN
889	!
890	!-- 64bit-offset format
891	nc_stat = NF90_CREATE( filename, &
892	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
893	id_set_xz(av) )
894
895	#if defined( __netcdf4 )
896	ELSEIF ( netcdf_data_format == 3 ) THEN
897	!
898	!-- NetCDF4/HDF5 format
899	nc_stat = NF90_CREATE( filename, &
900	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
901	id_set_xz(av), COMM = comm2d, &
902	INFO = MPI_INFO_NULL )
903
904	ELSEIF ( netcdf_data_format == 4 ) THEN
905	!
906	!-- NetCDF4/HDF5 format with classic model flag
907	nc_stat = NF90_CREATE( filename, &
908	OR( NF90_NOCLOBBER, &
909	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
910	id_set_xz(av), COMM = comm2d, &
911	INFO = MPI_INFO_NULL )
912	#endif
913	ENDIF
914
915	CALL handle_netcdf_error( 'check_open', 25 )
916
917	!
918	!-- Define the header
919	CALL define_netcdf_header( 'xz', netcdf_extend, av )
920
921	!
922	!-- In case of parallel NetCDF output, create flag file which tells
923	!-- combine_plot_fields that nothing is to do.
924	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
925	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
926	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
927	CLOSE( 99 )
928	ENDIF
929
930	ENDIF
931
932	CASE ( 103, 113 )
933	!
934	!-- Set filename depending on unit number
935	IF ( file_id == 103 ) THEN
936	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
937	av = 0
938	ELSE
939	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
940	av = 1
941	ENDIF
942	!
943	!-- Inquire, if there is a NetCDF file from a previuos run. This should
944	!-- be opened for extension, if its dimensions and variables match the
945	!-- actual run.
946	INQUIRE( FILE=filename, EXIST=netcdf_extend )
947
948	IF ( netcdf_extend ) THEN
949	!
950	!-- Open an existing NetCDF file for output
951	IF ( netcdf_data_format < 3 ) THEN
952	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
953	ELSE
954	#if defined( __netcdf4 )
955	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
956	COMM = comm2d, INFO = MPI_INFO_NULL )
957	#endif
958	ENDIF
959
960	CALL handle_netcdf_error( 'check_open', 26 )
961	!
962	!-- Read header information and set all ids. If there is a mismatch
963	!-- between the previuos and the actual run, netcdf_extend is returned
964	!-- as .FALSE.
965	CALL define_netcdf_header( 'yz', netcdf_extend, av )
966
967	!
968	!-- Remove the local file, if it can not be extended
969	IF ( .NOT. netcdf_extend ) THEN
970	nc_stat = NF90_CLOSE( id_set_yz(av) )
971	CALL handle_netcdf_error( 'check_open', 27 )
972	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
973	ENDIF
974
975	ENDIF
976
977	IF ( .NOT. netcdf_extend ) THEN
978	!
979	!-- Create a new NetCDF output file with requested NetCDF format
980	IF ( netcdf_data_format == 1 ) THEN
981	!
982	!-- Classic NetCDF format
983	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
984
985	ELSEIF ( netcdf_data_format == 2 ) THEN
986	!
987	!-- 64bit-offset format
988	nc_stat = NF90_CREATE( filename, &
989	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
990	id_set_yz(av) )
991
992	#if defined( __netcdf4 )
993	ELSEIF ( netcdf_data_format == 3 ) THEN
994	!
995	!-- NetCDF4/HDF5 format
996	nc_stat = NF90_CREATE( filename, &
997	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
998	id_set_yz(av), COMM = comm2d, &
999	INFO = MPI_INFO_NULL )
1000
1001	ELSEIF ( netcdf_data_format == 4 ) THEN
1002	!
1003	!-- NetCDF4/HDF5 format with classic model flag
1004	nc_stat = NF90_CREATE( filename, &
1005	OR( NF90_NOCLOBBER, &
1006	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1007	id_set_yz(av), COMM = comm2d, &
1008	INFO = MPI_INFO_NULL )
1009	#endif
1010	ENDIF
1011
1012	CALL handle_netcdf_error( 'check_open', 28 )
1013
1014	!
1015	!-- Define the header
1016	CALL define_netcdf_header( 'yz', netcdf_extend, av )
1017
1018	!
1019	!-- In case of parallel NetCDF output, create flag file which tells
1020	!-- combine_plot_fields that nothing is to do.
1021	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1022	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
1023	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1024	CLOSE( 99 )
1025	ENDIF
1026
1027	ENDIF
1028
1029	CASE ( 104 )
1030	!
1031	!-- Set filename
1032	filename = 'DATA_1D_PR_NETCDF' // coupling_char
1033
1034	!
1035	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1036	!-- be opened for extension, if its variables match the actual run.
1037	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1038
1039	IF ( netcdf_extend ) THEN
1040	!
1041	!-- Open an existing NetCDF file for output
1042	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
1043	CALL handle_netcdf_error( 'check_open', 29 )
1044	!
1045	!-- Read header information and set all ids. If there is a mismatch
1046	!-- between the previuos and the actual run, netcdf_extend is returned
1047	!-- as .FALSE.
1048	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1049
1050	!
1051	!-- Remove the local file, if it can not be extended
1052	IF ( .NOT. netcdf_extend ) THEN
1053	nc_stat = NF90_CLOSE( id_set_pr )
1054	CALL handle_netcdf_error( 'check_open', 30 )
1055	CALL local_system( 'rm ' // TRIM( filename ) )
1056	ENDIF
1057
1058	ENDIF
1059
1060	IF ( .NOT. netcdf_extend ) THEN
1061	!
1062	!-- Create a new NetCDF output file
1063	IF ( netcdf_data_format > 1 ) THEN
1064	nc_stat = NF90_CREATE( filename, &
1065	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1066	id_set_pr )
1067	ELSE
1068	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1069	ENDIF
1070	CALL handle_netcdf_error( 'check_open', 31 )
1071	!
1072	!-- Define the header
1073	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1074
1075	ENDIF
1076
1077	CASE ( 105 )
1078	!
1079	!-- Set filename
1080	filename = 'DATA_1D_TS_NETCDF' // coupling_char
1081
1082	!
1083	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1084	!-- be opened for extension, if its variables match the actual run.
1085	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1086
1087	IF ( netcdf_extend ) THEN
1088	!
1089	!-- Open an existing NetCDF file for output
1090	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1091	CALL handle_netcdf_error( 'check_open', 32 )
1092	!
1093	!-- Read header information and set all ids. If there is a mismatch
1094	!-- between the previuos and the actual run, netcdf_extend is returned
1095	!-- as .FALSE.
1096	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1097
1098	!
1099	!-- Remove the local file, if it can not be extended
1100	IF ( .NOT. netcdf_extend ) THEN
1101	nc_stat = NF90_CLOSE( id_set_ts )
1102	CALL handle_netcdf_error( 'check_open', 33 )
1103	CALL local_system( 'rm ' // TRIM( filename ) )
1104	ENDIF
1105
1106	ENDIF
1107
1108	IF ( .NOT. netcdf_extend ) THEN
1109	!
1110	!-- Create a new NetCDF output file
1111	IF ( netcdf_data_format > 1 ) THEN
1112	nc_stat = NF90_CREATE( filename, &
1113	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1114	id_set_ts )
1115	ELSE
1116	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1117	ENDIF
1118	CALL handle_netcdf_error( 'check_open', 34 )
1119	!
1120	!-- Define the header
1121	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1122
1123	ENDIF
1124
1125
1126	CASE ( 106, 116 )
1127	!
1128	!-- Set filename depending on unit number
1129	IF ( file_id == 106 ) THEN
1130	filename = 'DATA_3D_NETCDF' // coupling_char
1131	av = 0
1132	ELSE
1133	filename = 'DATA_3D_AV_NETCDF' // coupling_char
1134	av = 1
1135	ENDIF
1136	!
1137	!-- Inquire, if there is a NetCDF file from a previous run. This should
1138	!-- be opened for extension, if its dimensions and variables match the
1139	!-- actual run.
1140	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1141
1142	IF ( netcdf_extend ) THEN
1143	!
1144	!-- Open an existing NetCDF file for output
1145	IF ( netcdf_data_format < 3 ) THEN
1146	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1147	ELSE
1148	#if defined( __netcdf4 )
1149	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1150	COMM = comm2d, INFO = MPI_INFO_NULL )
1151	#endif
1152	ENDIF
1153	CALL handle_netcdf_error( 'check_open', 35 )
1154	!
1155	!-- Read header information and set all ids. If there is a mismatch
1156	!-- between the previuos and the actual run, netcdf_extend is returned
1157	!-- as .FALSE.
1158	CALL define_netcdf_header( '3d', netcdf_extend, av )
1159
1160	!
1161	!-- Remove the local file, if it can not be extended
1162	IF ( .NOT. netcdf_extend ) THEN
1163	nc_stat = NF90_CLOSE( id_set_3d(av) )
1164	CALL handle_netcdf_error( 'check_open', 36 )
1165	CALL local_system('rm ' // TRIM( filename ) )
1166	ENDIF
1167
1168	ENDIF
1169
1170	IF ( .NOT. netcdf_extend ) THEN
1171	!
1172	!-- Create a new NetCDF output file with requested NetCDF format
1173	IF ( netcdf_data_format == 1 ) THEN
1174	!
1175	!-- Classic NetCDF format
1176	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1177
1178	ELSEIF ( netcdf_data_format == 2 ) THEN
1179	!
1180	!-- 64bit-offset format
1181	nc_stat = NF90_CREATE( filename, &
1182	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1183	id_set_3d(av) )
1184
1185	#if defined( __netcdf4 )
1186	ELSEIF ( netcdf_data_format == 3 ) THEN
1187	!
1188	!-- NetCDF4/HDF5 format
1189	nc_stat = NF90_CREATE( filename, &
1190	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1191	id_set_3d(av), COMM = comm2d, &
1192	INFO = MPI_INFO_NULL )
1193
1194	ELSEIF ( netcdf_data_format == 4 ) THEN
1195	!
1196	!-- NetCDF4/HDF5 format with classic model flag
1197	nc_stat = NF90_CREATE( filename, &
1198	OR( NF90_NOCLOBBER, &
1199	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1200	id_set_3d(av), COMM = comm2d, &
1201	INFO = MPI_INFO_NULL )
1202	#endif
1203	ENDIF
1204
1205	CALL handle_netcdf_error( 'check_open', 37 )
1206
1207	!
1208	!-- Define the header
1209	CALL define_netcdf_header( '3d', netcdf_extend, av )
1210
1211	!
1212	!-- In case of parallel NetCDF output, create flag file which tells
1213	!-- combine_plot_fields that nothing is to do.
1214	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1215	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1216	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1217	CLOSE( 99 )
1218	ENDIF
1219
1220	ENDIF
1221
1222
1223	CASE ( 107 )
1224	!
1225	!-- Set filename
1226	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1227
1228	!
1229	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1230	!-- be opened for extension, if its variables match the actual run.
1231	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1232
1233	IF ( netcdf_extend ) THEN
1234	!
1235	!-- Open an existing NetCDF file for output
1236	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1237	CALL handle_netcdf_error( 'check_open', 38 )
1238
1239	!
1240	!-- Read header information and set all ids. If there is a mismatch
1241	!-- between the previuos and the actual run, netcdf_extend is returned
1242	!-- as .FALSE.
1243	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1244
1245	!
1246	!-- Remove the local file, if it can not be extended
1247	IF ( .NOT. netcdf_extend ) THEN
1248	nc_stat = NF90_CLOSE( id_set_sp )
1249	CALL handle_netcdf_error( 'check_open', 39 )
1250	CALL local_system( 'rm ' // TRIM( filename ) )
1251	ENDIF
1252
1253	ENDIF
1254
1255	IF ( .NOT. netcdf_extend ) THEN
1256	!
1257	!-- Create a new NetCDF output file
1258	IF ( netcdf_data_format > 1 ) THEN
1259	nc_stat = NF90_CREATE( filename, &
1260	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1261	id_set_sp )
1262	ELSE
1263	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1264	ENDIF
1265	CALL handle_netcdf_error( 'check_open', 40 )
1266	!
1267	!-- Define the header
1268	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1269
1270	ENDIF
1271
1272
1273	CASE ( 108 )
1274
1275	IF ( myid_char == '' ) THEN
1276	filename = 'DATA_PRT_NETCDF' // coupling_char
1277	ELSE
1278	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1279	myid_char
1280	ENDIF
1281	!
1282	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1283	!-- be opened for extension, if its variables match the actual run.
1284	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1285
1286	IF ( netcdf_extend ) THEN
1287	!
1288	!-- Open an existing NetCDF file for output
1289	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1290	CALL handle_netcdf_error( 'check_open', 41 )
1291	!
1292	!-- Read header information and set all ids. If there is a mismatch
1293	!-- between the previuos and the actual run, netcdf_extend is returned
1294	!-- as .FALSE.
1295	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1296
1297	!
1298	!-- Remove the local file, if it can not be extended
1299	IF ( .NOT. netcdf_extend ) THEN
1300	nc_stat = NF90_CLOSE( id_set_prt )
1301	CALL handle_netcdf_error( 'check_open', 42 )
1302	CALL local_system( 'rm ' // filename )
1303	ENDIF
1304
1305	ENDIF
1306
1307	IF ( .NOT. netcdf_extend ) THEN
1308
1309	!
1310	!-- For runs on multiple processors create the subdirectory
1311	IF ( myid_char /= '' ) THEN
1312	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1313	THEN ! needs modification in case of non-extendable sets
1314	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1315	TRIM( coupling_char ) // '/' )
1316	ENDIF
1317	#if defined( __parallel ) && ! defined ( __check )
1318	!
1319	!-- Set a barrier in order to allow that all other processors in the
1320	!-- directory created by PE0 can open their file
1321	CALL MPI_BARRIER( comm2d, ierr )
1322	#endif
1323	ENDIF
1324
1325	!
1326	!-- Create a new NetCDF output file with requested NetCDF format
1327	IF ( netcdf_data_format == 1 ) THEN
1328	!
1329	!-- Classic NetCDF format
1330	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1331
1332	ELSEIF ( netcdf_data_format == 2 ) THEN
1333	!
1334	!-- 64bit-offset format
1335	nc_stat = NF90_CREATE( filename, &
1336	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1337	id_set_prt )
1338
1339	#if defined( __netcdf4 )
1340	ELSEIF ( netcdf_data_format == 3 ) THEN
1341	!
1342	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
1343	nc_stat = NF90_CREATE( filename, &
1344	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1345	id_set_prt )
1346
1347	ELSEIF ( netcdf_data_format == 4 ) THEN
1348	!
1349	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
1350	!-- output into a single file!
1351	nc_stat = NF90_CREATE( filename, &
1352	OR( NF90_NOCLOBBER, &
1353	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1354	id_set_prt )
1355	#endif
1356	ENDIF
1357
1358	CALL handle_netcdf_error( 'check_open', 43 )
1359
1360	!
1361	!-- Define the header
1362	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1363
1364	ENDIF
1365
1366	CASE ( 109 )
1367	!
1368	!-- Set filename
1369	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1370
1371	!
1372	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1373	!-- be opened for extension, if its variables match the actual run.
1374	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1375
1376	IF ( netcdf_extend ) THEN
1377	!
1378	!-- Open an existing NetCDF file for output
1379	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1380	CALL handle_netcdf_error( 'check_open', 393 )
1381	!
1382	!-- Read header information and set all ids. If there is a mismatch
1383	!-- between the previuos and the actual run, netcdf_extend is returned
1384	!-- as .FALSE.
1385	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1386
1387	!
1388	!-- Remove the local file, if it can not be extended
1389	IF ( .NOT. netcdf_extend ) THEN
1390	nc_stat = NF90_CLOSE( id_set_pts )
1391	CALL handle_netcdf_error( 'check_open', 394 )
1392	CALL local_system( 'rm ' // TRIM( filename ) )
1393	ENDIF
1394
1395	ENDIF
1396
1397	IF ( .NOT. netcdf_extend ) THEN
1398	!
1399	!-- Create a new NetCDF output file
1400	IF ( netcdf_data_format > 1 ) THEN
1401	nc_stat = NF90_CREATE( filename, &
1402	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1403	id_set_pts )
1404	ELSE
1405	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1406	ENDIF
1407	CALL handle_netcdf_error( 'check_open', 395 )
1408	!
1409	!-- Define the header
1410	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1411
1412	ENDIF
1413
1414	CASE ( 201:200+2*max_masks )
1415	!
1416	!-- Set filename depending on unit number
1417	IF ( file_id <= 200+max_masks ) THEN
1418	mid = file_id - 200
1419	WRITE ( mask_char,'(I2.2)') mid
1420	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1421	av = 0
1422	ELSE
1423	mid = file_id - (200+max_masks)
1424	WRITE ( mask_char,'(I2.2)') mid
1425	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1426	coupling_char
1427	av = 1
1428	ENDIF
1429	!
1430	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1431	!-- be opened for extension, if its dimensions and variables match the
1432	!-- actual run.
1433	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1434
1435	IF ( netcdf_extend ) THEN
1436	!
1437	!-- Open an existing NetCDF file for output
1438	#if defined( __netcdf4 )
1439	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1440	COMM = comm2d, INFO = MPI_INFO_NULL )
1441	#else
1442	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1443	#endif
1444	CALL handle_netcdf_error( 'check_open', 456 )
1445	!
1446	!-- Read header information and set all ids. If there is a mismatch
1447	!-- between the previuos and the actual run, netcdf_extend is returned
1448	!-- as .FALSE.
1449	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1450
1451	!
1452	!-- Remove the local file, if it can not be extended
1453	IF ( .NOT. netcdf_extend ) THEN
1454	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1455	CALL handle_netcdf_error( 'check_open', 457 )
1456	CALL local_system('rm ' // TRIM( filename ) )
1457	ENDIF
1458
1459	ENDIF
1460
1461	IF ( .NOT. netcdf_extend ) THEN
1462	!
1463	!-- Create a new NetCDF output file with requested NetCDF format
1464	IF ( netcdf_data_format == 1 ) THEN
1465	!
1466	!-- Classic NetCDF format
1467	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1468	id_set_mask(mid,av) )
1469
1470	ELSEIF ( netcdf_data_format == 2 ) THEN
1471	!
1472	!-- 64bit-offset format
1473	nc_stat = NF90_CREATE( filename, &
1474	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1475	id_set_mask(mid,av) )
1476
1477
1478	#if defined( __netcdf4 )
1479	ELSEIF ( netcdf_data_format == 3 ) THEN
1480	!
1481	!-- NetCDF4/HDF5 format
1482	nc_stat = NF90_CREATE( filename, &
1483	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1484	id_set_mask(mid,av), COMM = comm2d, &
1485	INFO = MPI_INFO_NULL )
1486
1487	ELSEIF ( netcdf_data_format == 4 ) THEN
1488	!
1489	!-- NetCDF4/HDF5 format with classic model flag
1490	nc_stat = NF90_CREATE( filename, &
1491	OR( NF90_NOCLOBBER, &
1492	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1493	id_set_mask(mid,av), COMM = comm2d, &
1494	INFO = MPI_INFO_NULL )
1495	#endif
1496	ENDIF
1497
1498	CALL handle_netcdf_error( 'check_open', 458 )
1499	!
1500	!-- Define the header
1501	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1502
1503	ENDIF
1504
1505
1506	#else
1507
1508	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1509
1510	!
1511	!-- Nothing is done in case of missing netcdf support
1512	RETURN
1513
1514	#endif
1515
1516	CASE DEFAULT
1517
1518	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1519	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1520
1521	END SELECT
1522
1523	!
1524	!-- Set open flag
1525	openfile(file_id)%opened = .TRUE.
1526
1527	!
1528	!-- Formats
1529	3300 FORMAT ('#'/ &
1530	'coord 1 file=',A,' filetype=unformatted'/ &
1531	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1532	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1533	'#')
1534	4000 FORMAT ('# ',A)
1535	5000 FORMAT ('# ',A/ &
1536	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1537	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1538	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1539	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1540	8000 FORMAT (A/ &
1541	' step time # of parts lPE sent/recv rPE sent/recv ',&
1542	'sPE sent/recv nPE sent/recv max # of parts'/ &
1543	103('-'))
1544
1545	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |