Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 583

Last change on this file since 583 was 565, checked in by helmke, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 55.1 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_open.f90 565 2010-09-30 13:34:53Z heinze $
11	!
12	! 564 2010-09-30 13:18:59Z helmke
13	! start number of mask output files changed to 201, netcdf message identifiers
14	! of masked output changed
15	!
16	! 519 2010-03-19 05:30:02Z raasch
17	! NetCDF4 support for particle data
18	!
19	! 493 2010-03-01 08:30:24Z raasch
20	! NetCDF4 support (parallel output)
21	!
22	! 410 2009-12-04 17:05:40Z letzel
23	! masked data output
24	!
25	! 277 2009-03-31 09:13:47Z heinze
26	! Output of NetCDF messages with aid of message handling routine.
27	! Output of messages replaced by message handling routine
28	!
29	! 146 2008-01-17 13:08:34Z raasch
30	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
31	! because only this file contains the global variables,
32	! myid_char_14 removed
33	!
34	! 120 2007-10-17 11:54:43Z raasch
35	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
36	!
37	! 105 2007-08-08 07:12:55Z raasch
38	! Different filenames are used in case of a coupled simulation,
39	! coupling_char added to all relevant filenames
40	!
41	! 82 2007-04-16 15:40:52Z raasch
42	! Call of local_getenv removed, preprocessor directives for old systems removed
43	!
44	! 46 2007-03-05 06:00:47Z raasch
45	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
46	!
47	! RCS Log replace by Id keyword, revision history cleaned up
48	!
49	! Revision 1.44 2006/08/22 13:48:34 raasch
50	! xz and yz cross sections now up to nzt+1
51	!
52	! Revision 1.1 1997/08/11 06:10:55 raasch
53	! Initial revision
54	!
55	!
56	! Description:
57	! ------------
58	! Check if file unit is open. If not, open file and, if necessary, write a
59	! header or start other initializing actions, respectively.
60	!------------------------------------------------------------------------------!
61
62	USE array_kind
63	USE arrays_3d
64	USE control_parameters
65	USE grid_variables
66	USE indices
67	USE netcdf_control
68	USE particle_attributes
69	USE pegrid
70	USE profil_parameter
71	USE statistics
72
73	IMPLICIT NONE
74
75	CHARACTER (LEN=2) :: mask_char, suffix
76	CHARACTER (LEN=20) :: xtext = 'time in s'
77	CHARACTER (LEN=30) :: filename
78	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
79	avs_data_file_localname
80	CHARACTER (LEN=80) :: rtext
81	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
82	batch_scp, zeile
83	CHARACTER (LEN=400) :: command
84
85	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
86	j, k, legpos = 1, timodex = 1
87	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
88
89	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
90	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
91	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
92
93	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
94	sizex = 250.0, sizey = 40.0, texfac = 1.5
95
96	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
97	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
98
99
100	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
101	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
102	rand, rlegfak, sizex, sizey, texfac, &
103	timodex, twoxa, twoya, xtext
104
105
106	!
107	!-- Immediate return if file already open
108	IF ( openfile(file_id)%opened ) RETURN
109
110	!
111	!-- Only certain files are allowed to be re-opened
112	!-- NOTE: some of the other files perhaps also could be re-opened, but it
113	!-- has not been checked so far, if it works!
114	IF ( openfile(file_id)%opened_before ) THEN
115	SELECT CASE ( file_id )
116	CASE ( 13, 14, 21, 22, 23, 80:85 )
117	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
118	message_string = 're-open of unit ' // &
119	'14 is not verified. Please check results!'
120	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
121	ENDIF
122
123	CASE DEFAULT
124	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
125	' is not allowed'
126	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
127
128	RETURN
129
130	END SELECT
131	ENDIF
132
133	!
134	!-- Check if file may be opened on the relevant PE
135	SELECT CASE ( file_id )
136
137	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
138
139	IF ( myid /= 0 ) THEN
140	WRITE( message_string, * ) 'opening file-id ',file_id, &
141	' not allowed for PE ',myid
142	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
143	ENDIF
144
145	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
146
147	IF ( netcdf_data_format < 3 ) THEN
148
149	IF ( myid /= 0 ) THEN
150	WRITE( message_string, * ) 'opening file-id ',file_id, &
151	' not allowed for PE ',myid
152	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
153	ENDIF
154
155	ENDIF
156
157	CASE ( 21, 22, 23 )
158
159	IF ( .NOT. data_output_2d_on_each_pe ) THEN
160	IF ( myid /= 0 ) THEN
161	WRITE( message_string, * ) 'opening file-id ',file_id, &
162	' not allowed for PE ',myid
163	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
164	END IF
165	ENDIF
166
167	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
168
169	!
170	!-- File-ids that are used temporarily in other routines
171	WRITE( message_string, * ) 'opening file-id ',file_id, &
172	' is not allowed since it is used otherwise'
173	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
174
175	END SELECT
176
177	!
178	!-- Open relevant files
179	SELECT CASE ( file_id )
180
181	CASE ( 11 )
182
183	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
184	STATUS='OLD' )
185
186	CASE ( 13 )
187
188	IF ( myid_char == '' ) THEN
189	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
190	FORM='UNFORMATTED', STATUS='OLD' )
191	ELSE
192	!
193	!-- First opening of unit 13 openes file _0000 on all PEs because only
194	!-- this file contains the global variables
195	IF ( .NOT. openfile(file_id)%opened_before ) THEN
196	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
197	FORM='UNFORMATTED', STATUS='OLD' )
198	ELSE
199	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
200	FORM='UNFORMATTED', STATUS='OLD' )
201	ENDIF
202	ENDIF
203
204	CASE ( 14 )
205
206	IF ( myid_char == '' ) THEN
207	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
208	FORM='UNFORMATTED', POSITION='APPEND' )
209	ELSE
210	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
211	CALL local_system( 'mkdir BINOUT' // coupling_char )
212	ENDIF
213	#if defined( __parallel )
214	!
215	!-- Set a barrier in order to allow that all other processors in the
216	!-- directory created by PE0 can open their file
217	CALL MPI_BARRIER( comm2d, ierr )
218	#endif
219	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
220	FORM='UNFORMATTED', POSITION='APPEND' )
221	ENDIF
222
223	CASE ( 15 )
224
225	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
226
227	CASE ( 16 )
228
229	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
230
231	CASE ( 17 )
232
233	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
234
235	CASE ( 18 )
236
237	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
238
239	CASE ( 19 )
240
241	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
242
243	CASE ( 20 )
244
245	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
246	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
247	ENDIF
248	IF ( myid_char == '' ) THEN
249	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
250	FORM='UNFORMATTED', POSITION='APPEND' )
251	ELSE
252	#if defined( __parallel )
253	!
254	!-- Set a barrier in order to allow that all other processors in the
255	!-- directory created by PE0 can open their file
256	CALL MPI_BARRIER( comm2d, ierr )
257	#endif
258	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
259	FORM='UNFORMATTED', POSITION='APPEND' )
260	ENDIF
261
262	CASE ( 21 )
263
264	IF ( data_output_2d_on_each_pe ) THEN
265	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
266	FORM='UNFORMATTED', POSITION='APPEND' )
267	ELSE
268	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
269	FORM='UNFORMATTED', POSITION='APPEND' )
270	ENDIF
271
272	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
273	!
274	!-- Output for combine_plot_fields
275	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
276	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
277	WRITE (21) 0, nx+1, 0, ny+1 ! output part
278	ENDIF
279	!
280	!-- Determine and write ISO2D coordiante header
281	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
282	hu = 0.0
283	ho = (ny+1) * dy
284	DO i = 1, ny
285	eta(i) = REAL( i ) / ( ny + 1.0 )
286	ENDDO
287	eta(0) = 0.0
288	eta(ny+1) = 1.0
289
290	WRITE (21) dx,eta,hu,ho
291	DEALLOCATE( eta, ho, hu )
292
293	!
294	!-- Create output file for local parameters
295	IF ( iso2d_output ) THEN
296	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
297	FORM='FORMATTED', DELIM='APOSTROPHE' )
298	openfile(27)%opened = .TRUE.
299	ENDIF
300
301	ENDIF
302
303	CASE ( 22 )
304
305	IF ( data_output_2d_on_each_pe ) THEN
306	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
307	FORM='UNFORMATTED', POSITION='APPEND' )
308	ELSE
309	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
310	POSITION='APPEND' )
311	ENDIF
312
313	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
314	!
315	!-- Output for combine_plot_fields
316	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
317	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
318	WRITE (22) 0, nx+1, 0, nz+1 ! output part
319	ENDIF
320	!
321	!-- Determine and write ISO2D coordiante header
322	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
323	hu = 0.0
324	ho = zu(nz+1)
325	DO i = 1, nz
326	eta(i) = REAL( zu(i) ) / zu(nz+1)
327	ENDDO
328	eta(0) = 0.0
329	eta(nz+1) = 1.0
330
331	WRITE (22) dx,eta,hu,ho
332	DEALLOCATE( eta, ho, hu )
333	!
334	!-- Create output file for local parameters
335	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
336	FORM='FORMATTED', DELIM='APOSTROPHE' )
337	openfile(28)%opened = .TRUE.
338
339	ENDIF
340
341	CASE ( 23 )
342
343	IF ( data_output_2d_on_each_pe ) THEN
344	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
345	FORM='UNFORMATTED', POSITION='APPEND' )
346	ELSE
347	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
348	POSITION='APPEND' )
349	ENDIF
350
351	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
352	!
353	!-- Output for combine_plot_fields
354	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
355	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
356	WRITE (23) 0, ny+1, 0, nz+1 ! output part
357	ENDIF
358	!
359	!-- Determine and write ISO2D coordiante header
360	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
361	hu = 0.0
362	ho = zu(nz+1)
363	DO i = 1, nz
364	eta(i) = REAL( zu(i) ) / zu(nz+1)
365	ENDDO
366	eta(0) = 0.0
367	eta(nz+1) = 1.0
368
369	WRITE (23) dx,eta,hu,ho
370	DEALLOCATE( eta, ho, hu )
371	!
372	!-- Create output file for local parameters
373	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
374	FORM='FORMATTED', DELIM='APOSTROPHE' )
375	openfile(29)%opened = .TRUE.
376
377	ENDIF
378
379	CASE ( 30 )
380
381	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
382	FORM='UNFORMATTED' )
383	!
384	!-- Write coordinate file for AVS
385	IF ( myid == 0 ) THEN
386	#if defined( __parallel )
387	!
388	!-- Specifications for combine_plot_fields
389	IF ( .NOT. do3d_compress ) THEN
390	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
391	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
392	ENDIF
393	#endif
394	!
395	!-- Write coordinate file for AVS:
396	!-- First determine file names (including cyle numbers) of AVS files on
397	!-- target machine (to which the files are to be transferred).
398	!-- Therefore path information has to be obtained first.
399	IF ( avs_output ) THEN
400	iaddres = LEN_TRIM( return_addres )
401	iusern = LEN_TRIM( return_username )
402
403	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
404	DO WHILE ( .NOT. avs_coor_file_found .OR. &
405	.NOT. avs_data_file_found )
406
407	READ ( 3, '(A)', END=1 ) zeile
408
409	SELECT CASE ( zeile(1:11) )
410
411	CASE ( 'PLOT3D_COOR' )
412	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
413	avs_coor_file_localname
414	avs_coor_file_found = .TRUE.
415
416	CASE ( 'PLOT3D_DATA' )
417	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
418	avs_data_file_localname
419	avs_data_file_found = .TRUE.
420
421	CASE DEFAULT
422	READ ( 3, '(A/A)' ) zeile, zeile
423
424	END SELECT
425
426	ENDDO
427	!
428	!-- Now the cycle numbers on the remote machine must be obtained
429	!-- using batch_scp
430	1 CLOSE ( 3 )
431	IF ( .NOT. avs_coor_file_found .OR. &
432	.NOT. avs_data_file_found ) THEN
433	message_string= 'no filename for AVS-data-file ' // &
434	'found in MRUN-config-file' // &
435	' &filename in FLD-file set to "unknown"'
436	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
437
438	avs_coor_file = 'unknown'
439	avs_data_file = 'unknown'
440	ELSE
441	get_filenames = .TRUE.
442	IF ( TRIM( host ) == 'hpmuk' .OR. &
443	TRIM( host ) == 'lcmuk' ) THEN
444	batch_scp = '/home/raasch/pub/batch_scp'
445	ELSEIF ( TRIM( host ) == 'nech' ) THEN
446	batch_scp = '/ipf/b/b323011/pub/batch_scp'
447	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
448	TRIM( host ) == 'ibmb' ) THEN
449	batch_scp = '/home/h/niksiraa/pub/batch_scp'
450	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
451	batch_scp = '/home/nhbksira/pub/batch_scp'
452	ELSE
453	message_string= 'no path for batch_scp on host "' // &
454	TRIM( host ) // '"'
455	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
456	get_filenames = .FALSE.
457	ENDIF
458
459	IF ( get_filenames ) THEN
460	!
461	!-- Determine the coordinate file name.
462	!-- /etc/passwd serves as Dummy-Datei, because it is not
463	!-- really transferred.
464	command = TRIM( batch_scp ) // ' -n -u ' // &
465	return_username(1:iusern) // ' ' // &
466	return_addres(1:iaddres) // ' /etc/passwd "' // &
467	TRIM( avs_coor_file_catalog ) // '" ' // &
468	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
469
470	CALL local_system( command )
471	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
472	READ ( 3, '(A)' ) avs_coor_file
473	CLOSE ( 3 )
474	!
475	!-- Determine the data file name
476	command = TRIM( batch_scp ) // ' -n -u ' // &
477	return_username(1:iusern) // ' ' // &
478	return_addres(1:iaddres) // ' /etc/passwd "' // &
479	TRIM( avs_data_file_catalog ) // '" ' // &
480	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
481
482	CALL local_system( command )
483	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
484	READ ( 3, '(A)' ) avs_data_file
485	CLOSE ( 3 )
486
487	ELSE
488
489	avs_coor_file = 'unknown'
490	avs_data_file = 'unknown'
491
492	ENDIF
493
494	ENDIF
495
496	!
497	!-- Output of the coordinate file description for FLD-file
498	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
499	openfile(33)%opened = .TRUE.
500	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
501	TRIM( avs_coor_file ), (nx+2)*4, &
502	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
503
504
505	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
506	DO i = 0, nx+1
507	xkoor(i) = i * dx
508	ENDDO
509	DO j = 0, ny+1
510	ykoor(j) = j * dy
511	ENDDO
512	DO k = 0, nz_do3d
513	zkoor(k) = zu(k)
514	ENDDO
515
516	!
517	!-- Create and write on AVS coordinate file
518	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
519	openfile(31)%opened = .TRUE.
520
521	WRITE (31) xkoor, ykoor, zkoor
522	DEALLOCATE( xkoor, ykoor, zkoor )
523
524	!
525	!-- Create FLD file (being written on in close_file)
526	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
527	openfile(32)%opened = .TRUE.
528
529	!
530	!-- Create flag file for compressed 3D output,
531	!-- influences output commands in mrun
532	IF ( do3d_compress ) THEN
533	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
534	WRITE ( 3, '(1X)' )
535	CLOSE ( 3 )
536	ENDIF
537
538	ENDIF
539
540	ENDIF
541
542	!
543	!-- In case of data compression output of the coordinates of the
544	!-- corresponding partial array of a PE only once at the top of the file
545	IF ( avs_output .AND. do3d_compress ) THEN
546	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
547	ENDIF
548
549	CASE ( 40:49 )
550
551	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
552	suffix = ''
553	ELSE
554	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
555	ENDIF
556	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
557	TRIM( suffix ), &
558	FORM='FORMATTED' )
559	!
560	!-- Write contents comments at the top of the file
561	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
562	TRIM( region( file_id - 40 ) )
563
564	CASE ( 50:59 )
565
566	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
567	suffix = ''
568	ELSE
569	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
570	ENDIF
571	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
572	TRIM( suffix ), &
573	FORM='FORMATTED', RECL=496 )
574	!
575	!-- Write PROFIL parameter file for output of time series
576	!-- NOTE: To be on the safe side, this output is done at the beginning of
577	!-- the model run (in case of collapse) and it is repeated in
578	!-- close_file, then, however, with value ranges for the coordinate
579	!-- systems
580	!
581	!-- Firstly determine the number of the coordinate systems to be drawn
582	cranz = 0
583	DO j = 1, 10
584	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
585	ENDDO
586	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
587	TRIM( region( file_id - 50 ) )
588	!
589	!-- Write RAHMEN parameter
590	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
591	TRIM( suffix ), &
592	FORM='FORMATTED', DELIM='APOSTROPHE' )
593	WRITE ( 90, RAHMEN )
594	!
595	!-- Determine and write CROSS parameters for the individual coordinate
596	!-- systems
597	DO j = 1, 10
598	k = cross_ts_number_count(j)
599	IF ( k /= 0 ) THEN
600	!
601	!-- Store curve numbers, colours and line style
602	klist(1:k) = cross_ts_numbers(1:k,j)
603	klist(k+1:10) = 999999
604	cucol(1:k) = linecolors(1:k)
605	lstyle(1:k) = linestyles(1:k)
606	!
607	!-- Write CROSS parameter
608	WRITE ( 90, CROSS )
609
610	ENDIF
611	ENDDO
612
613	CLOSE ( 90 )
614	!
615	!-- Write all labels at the top of the data file, but only during the
616	!-- first run of a sequence of jobs. The following jobs copy the time
617	!-- series data to the bottom of that file.
618	IF ( runnr == 0 ) THEN
619	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
620	' ' // TRIM( region( file_id - 50 ) )
621	ENDIF
622
623
624	CASE ( 80 )
625
626	IF ( myid_char == '' ) THEN
627	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
628	FORM='FORMATTED', POSITION='APPEND' )
629	ELSE
630	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
631	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
632	ENDIF
633	#if defined( __parallel )
634	!
635	!-- Set a barrier in order to allow that thereafter all other
636	!-- processors in the directory created by PE0 can open their file.
637	!-- WARNING: The following barrier will lead to hanging jobs, if
638	!-- check_open is first called from routine
639	!-- allocate_prt_memory!
640	IF ( .NOT. openfile(80)%opened_before ) THEN
641	CALL MPI_BARRIER( comm2d, ierr )
642	ENDIF
643	#endif
644	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
645	myid_char, &
646	FORM='FORMATTED', POSITION='APPEND' )
647	ENDIF
648
649	IF ( .NOT. openfile(80)%opened_before ) THEN
650	WRITE ( 80, 8000 ) TRIM( run_description_header )
651	ENDIF
652
653	CASE ( 81 )
654
655	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
656	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
657
658	CASE ( 82 )
659
660	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
661	POSITION = 'APPEND' )
662
663	CASE ( 83 )
664
665	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
666	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
667
668	CASE ( 84 )
669
670	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
671	POSITION='APPEND' )
672
673	CASE ( 85 )
674
675	IF ( myid_char == '' ) THEN
676	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
677	FORM='UNFORMATTED', POSITION='APPEND' )
678	ELSE
679	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
680	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
681	ENDIF
682	#if defined( __parallel )
683	!
684	!-- Set a barrier in order to allow that thereafter all other
685	!-- processors in the directory created by PE0 can open their file
686	CALL MPI_BARRIER( comm2d, ierr )
687	#endif
688	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
689	myid_char, &
690	FORM='UNFORMATTED', POSITION='APPEND' )
691	ENDIF
692
693	IF ( .NOT. openfile(85)%opened_before ) THEN
694	WRITE ( 85 ) run_description_header
695	!
696	!-- Attention: change version number whenever the output format on
697	!-- unit 85 is changed (see also in routine advec_particles)
698	rtext = 'data format version 3.0'
699	WRITE ( 85 ) rtext
700	WRITE ( 85 ) number_of_particle_groups, &
701	max_number_of_particle_groups
702	WRITE ( 85 ) particle_groups
703	ENDIF
704
705	#if defined( __netcdf )
706	CASE ( 101, 111 )
707	!
708	!-- Set filename depending on unit number
709	IF ( file_id == 101 ) THEN
710	filename = 'DATA_2D_XY_NETCDF' // coupling_char
711	av = 0
712	ELSE
713	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
714	av = 1
715	ENDIF
716	!
717	!-- Inquire, if there is a NetCDF file from a previuos run. This should
718	!-- be opened for extension, if its dimensions and variables match the
719	!-- actual run.
720	INQUIRE( FILE=filename, EXIST=netcdf_extend )
721
722	IF ( netcdf_extend ) THEN
723	!
724	!-- Open an existing NetCDF file for output
725	#if defined( __netcdf4 )
726	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
727	COMM = comm2d, INFO = MPI_INFO_NULL )
728	#else
729	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
730	#endif
731
732	CALL handle_netcdf_error( 'check_open', 20 )
733	!
734	!-- Read header information and set all ids. If there is a mismatch
735	!-- between the previuos and the actual run, netcdf_extend is returned
736	!-- as .FALSE.
737	CALL define_netcdf_header( 'xy', netcdf_extend, av )
738
739	!
740	!-- Remove the local file, if it can not be extended
741	IF ( .NOT. netcdf_extend ) THEN
742	nc_stat = NF90_CLOSE( id_set_xy(av) )
743	CALL handle_netcdf_error( 'check_open', 21 )
744	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
745	ENDIF
746
747	ENDIF
748
749	IF ( .NOT. netcdf_extend ) THEN
750	!
751	!-- Create a new NetCDF output file with requested NetCDF format
752	IF ( netcdf_data_format == 1 ) THEN
753	!
754	!-- Classic NetCDF format
755	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
756
757	ELSEIF ( netcdf_data_format == 2 ) THEN
758	!
759	!-- 64bit-offset format
760	nc_stat = NF90_CREATE( filename, &
761	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
762	id_set_xy(av) )
763
764	#if defined( __netcdf4 )
765	ELSEIF ( netcdf_data_format == 3 ) THEN
766	!
767	!-- NetCDF4/HDF5 format
768	nc_stat = NF90_CREATE( filename, &
769	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
770	id_set_xy(av), COMM = comm2d, &
771	INFO = MPI_INFO_NULL )
772
773	ELSEIF ( netcdf_data_format == 4 ) THEN
774	!
775	!-- NetCDF4/HDF5 format with classic model flag
776	nc_stat = NF90_CREATE( filename, &
777	OR( NF90_NOCLOBBER, &
778	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
779	id_set_xy(av), COMM = comm2d, &
780	INFO = MPI_INFO_NULL )
781	#endif
782	ENDIF
783
784	CALL handle_netcdf_error( 'check_open', 22 )
785
786	!
787	!-- Define the header
788	CALL define_netcdf_header( 'xy', netcdf_extend, av )
789
790	!
791	!-- In case of parallel NetCDF output, create flag file which tells
792	!-- combine_plot_fields that nothing is to do.
793	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
794	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
795	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
796	CLOSE( 99 )
797	ENDIF
798
799	ENDIF
800
801	CASE ( 102, 112 )
802	!
803	!-- Set filename depending on unit number
804	IF ( file_id == 102 ) THEN
805	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
806	av = 0
807	ELSE
808	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
809	av = 1
810	ENDIF
811	!
812	!-- Inquire, if there is a NetCDF file from a previuos run. This should
813	!-- be opened for extension, if its dimensions and variables match the
814	!-- actual run.
815	INQUIRE( FILE=filename, EXIST=netcdf_extend )
816
817	IF ( netcdf_extend ) THEN
818	!
819	!-- Open an existing NetCDF file for output
820	#if defined( __netcdf4 )
821	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
822	COMM = comm2d, INFO = MPI_INFO_NULL )
823	#else
824	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
825	#endif
826	CALL handle_netcdf_error( 'check_open', 23 )
827	!
828	!-- Read header information and set all ids. If there is a mismatch
829	!-- between the previuos and the actual run, netcdf_extend is returned
830	!-- as .FALSE.
831	CALL define_netcdf_header( 'xz', netcdf_extend, av )
832
833	!
834	!-- Remove the local file, if it can not be extended
835	IF ( .NOT. netcdf_extend ) THEN
836	nc_stat = NF90_CLOSE( id_set_xz(av) )
837	CALL handle_netcdf_error( 'check_open', 24 )
838	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
839	ENDIF
840
841	ENDIF
842
843	IF ( .NOT. netcdf_extend ) THEN
844	!
845	!-- Create a new NetCDF output file with requested NetCDF format
846	IF ( netcdf_data_format == 1 ) THEN
847	!
848	!-- Classic NetCDF format
849	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
850
851	ELSEIF ( netcdf_data_format == 2 ) THEN
852	!
853	!-- 64bit-offset format
854	nc_stat = NF90_CREATE( filename, &
855	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
856	id_set_xz(av) )
857
858	#if defined( __netcdf4 )
859	ELSEIF ( netcdf_data_format == 3 ) THEN
860	!
861	!-- NetCDF4/HDF5 format
862	nc_stat = NF90_CREATE( filename, &
863	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
864	id_set_xz(av), COMM = comm2d, &
865	INFO = MPI_INFO_NULL )
866
867	ELSEIF ( netcdf_data_format == 4 ) THEN
868	!
869	!-- NetCDF4/HDF5 format with classic model flag
870	nc_stat = NF90_CREATE( filename, &
871	OR( NF90_NOCLOBBER, &
872	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
873	id_set_xz(av), COMM = comm2d, &
874	INFO = MPI_INFO_NULL )
875	#endif
876	ENDIF
877
878	CALL handle_netcdf_error( 'check_open', 25 )
879
880	!
881	!-- Define the header
882	CALL define_netcdf_header( 'xz', netcdf_extend, av )
883
884	!
885	!-- In case of parallel NetCDF output, create flag file which tells
886	!-- combine_plot_fields that nothing is to do.
887	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
888	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
889	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
890	CLOSE( 99 )
891	ENDIF
892
893	ENDIF
894
895	CASE ( 103, 113 )
896	!
897	!-- Set filename depending on unit number
898	IF ( file_id == 103 ) THEN
899	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
900	av = 0
901	ELSE
902	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
903	av = 1
904	ENDIF
905	!
906	!-- Inquire, if there is a NetCDF file from a previuos run. This should
907	!-- be opened for extension, if its dimensions and variables match the
908	!-- actual run.
909	INQUIRE( FILE=filename, EXIST=netcdf_extend )
910
911	IF ( netcdf_extend ) THEN
912	!
913	!-- Open an existing NetCDF file for output
914	#if defined( __netcdf4 )
915	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
916	COMM = comm2d, INFO = MPI_INFO_NULL )
917	#else
918	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
919	#endif
920	CALL handle_netcdf_error( 'check_open', 26 )
921	!
922	!-- Read header information and set all ids. If there is a mismatch
923	!-- between the previuos and the actual run, netcdf_extend is returned
924	!-- as .FALSE.
925	CALL define_netcdf_header( 'yz', netcdf_extend, av )
926
927	!
928	!-- Remove the local file, if it can not be extended
929	IF ( .NOT. netcdf_extend ) THEN
930	nc_stat = NF90_CLOSE( id_set_yz(av) )
931	CALL handle_netcdf_error( 'check_open', 27 )
932	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
933	ENDIF
934
935	ENDIF
936
937	IF ( .NOT. netcdf_extend ) THEN
938	!
939	!-- Create a new NetCDF output file with requested NetCDF format
940	IF ( netcdf_data_format == 1 ) THEN
941	!
942	!-- Classic NetCDF format
943	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
944
945	ELSEIF ( netcdf_data_format == 2 ) THEN
946	!
947	!-- 64bit-offset format
948	nc_stat = NF90_CREATE( filename, &
949	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
950	id_set_yz(av) )
951
952	#if defined( __netcdf4 )
953	ELSEIF ( netcdf_data_format == 3 ) THEN
954	!
955	!-- NetCDF4/HDF5 format
956	nc_stat = NF90_CREATE( filename, &
957	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
958	id_set_yz(av), COMM = comm2d, &
959	INFO = MPI_INFO_NULL )
960
961	ELSEIF ( netcdf_data_format == 4 ) THEN
962	!
963	!-- NetCDF4/HDF5 format with classic model flag
964	nc_stat = NF90_CREATE( filename, &
965	OR( NF90_NOCLOBBER, &
966	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
967	id_set_yz(av), COMM = comm2d, &
968	INFO = MPI_INFO_NULL )
969	#endif
970	ENDIF
971
972	CALL handle_netcdf_error( 'check_open', 28 )
973
974	!
975	!-- Define the header
976	CALL define_netcdf_header( 'yz', netcdf_extend, av )
977
978	!
979	!-- In case of parallel NetCDF output, create flag file which tells
980	!-- combine_plot_fields that nothing is to do.
981	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
982	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
983	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
984	CLOSE( 99 )
985	ENDIF
986
987	ENDIF
988
989	CASE ( 104 )
990	!
991	!-- Set filename
992	filename = 'DATA_1D_PR_NETCDF' // coupling_char
993
994	!
995	!-- Inquire, if there is a NetCDF file from a previuos run. This should
996	!-- be opened for extension, if its variables match the actual run.
997	INQUIRE( FILE=filename, EXIST=netcdf_extend )
998
999	IF ( netcdf_extend ) THEN
1000	!
1001	!-- Open an existing NetCDF file for output
1002	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
1003	CALL handle_netcdf_error( 'check_open', 29 )
1004	!
1005	!-- Read header information and set all ids. If there is a mismatch
1006	!-- between the previuos and the actual run, netcdf_extend is returned
1007	!-- as .FALSE.
1008	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1009
1010	!
1011	!-- Remove the local file, if it can not be extended
1012	IF ( .NOT. netcdf_extend ) THEN
1013	nc_stat = NF90_CLOSE( id_set_pr )
1014	CALL handle_netcdf_error( 'check_open', 30 )
1015	CALL local_system( 'rm ' // TRIM( filename ) )
1016	ENDIF
1017
1018	ENDIF
1019
1020	IF ( .NOT. netcdf_extend ) THEN
1021	!
1022	!-- Create a new NetCDF output file
1023	IF ( netcdf_data_format > 1 ) THEN
1024	nc_stat = NF90_CREATE( filename, &
1025	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1026	id_set_pr )
1027	ELSE
1028	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1029	ENDIF
1030	CALL handle_netcdf_error( 'check_open', 31 )
1031	!
1032	!-- Define the header
1033	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1034
1035	ENDIF
1036
1037	CASE ( 105 )
1038	!
1039	!-- Set filename
1040	filename = 'DATA_1D_TS_NETCDF' // coupling_char
1041
1042	!
1043	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1044	!-- be opened for extension, if its variables match the actual run.
1045	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1046
1047	IF ( netcdf_extend ) THEN
1048	!
1049	!-- Open an existing NetCDF file for output
1050	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1051	CALL handle_netcdf_error( 'check_open', 32 )
1052	!
1053	!-- Read header information and set all ids. If there is a mismatch
1054	!-- between the previuos and the actual run, netcdf_extend is returned
1055	!-- as .FALSE.
1056	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1057
1058	!
1059	!-- Remove the local file, if it can not be extended
1060	IF ( .NOT. netcdf_extend ) THEN
1061	nc_stat = NF90_CLOSE( id_set_ts )
1062	CALL handle_netcdf_error( 'check_open', 33 )
1063	CALL local_system( 'rm ' // TRIM( filename ) )
1064	ENDIF
1065
1066	ENDIF
1067
1068	IF ( .NOT. netcdf_extend ) THEN
1069	!
1070	!-- Create a new NetCDF output file
1071	IF ( netcdf_data_format > 1 ) THEN
1072	nc_stat = NF90_CREATE( filename, &
1073	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1074	id_set_ts )
1075	ELSE
1076	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1077	ENDIF
1078	CALL handle_netcdf_error( 'check_open', 34 )
1079	!
1080	!-- Define the header
1081	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1082
1083	ENDIF
1084
1085
1086	CASE ( 106, 116 )
1087	!
1088	!-- Set filename depending on unit number
1089	IF ( file_id == 106 ) THEN
1090	filename = 'DATA_3D_NETCDF' // coupling_char
1091	av = 0
1092	ELSE
1093	filename = 'DATA_3D_AV_NETCDF' // coupling_char
1094	av = 1
1095	ENDIF
1096	!
1097	!-- Inquire, if there is a NetCDF file from a previous run. This should
1098	!-- be opened for extension, if its dimensions and variables match the
1099	!-- actual run.
1100	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1101
1102	IF ( netcdf_extend ) THEN
1103	!
1104	!-- Open an existing NetCDF file for output
1105	#if defined( __netcdf4 )
1106	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1107	COMM = comm2d, INFO = MPI_INFO_NULL )
1108	#else
1109	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1110	#endif
1111	CALL handle_netcdf_error( 'check_open', 35 )
1112	!
1113	!-- Read header information and set all ids. If there is a mismatch
1114	!-- between the previuos and the actual run, netcdf_extend is returned
1115	!-- as .FALSE.
1116	CALL define_netcdf_header( '3d', netcdf_extend, av )
1117
1118	!
1119	!-- Remove the local file, if it can not be extended
1120	IF ( .NOT. netcdf_extend ) THEN
1121	nc_stat = NF90_CLOSE( id_set_3d(av) )
1122	CALL handle_netcdf_error( 'check_open', 36 )
1123	CALL local_system('rm ' // TRIM( filename ) )
1124	ENDIF
1125
1126	ENDIF
1127
1128	IF ( .NOT. netcdf_extend ) THEN
1129	!
1130	!-- Create a new NetCDF output file with requested NetCDF format
1131	IF ( netcdf_data_format == 1 ) THEN
1132	!
1133	!-- Classic NetCDF format
1134	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1135
1136	ELSEIF ( netcdf_data_format == 2 ) THEN
1137	!
1138	!-- 64bit-offset format
1139	nc_stat = NF90_CREATE( filename, &
1140	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1141	id_set_3d(av) )
1142
1143	#if defined( __netcdf4 )
1144	ELSEIF ( netcdf_data_format == 3 ) THEN
1145	!
1146	!-- NetCDF4/HDF5 format
1147	nc_stat = NF90_CREATE( filename, &
1148	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1149	id_set_3d(av), COMM = comm2d, &
1150	INFO = MPI_INFO_NULL )
1151
1152	ELSEIF ( netcdf_data_format == 4 ) THEN
1153	!
1154	!-- NetCDF4/HDF5 format with classic model flag
1155	nc_stat = NF90_CREATE( filename, &
1156	OR( NF90_NOCLOBBER, &
1157	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1158	id_set_3d(av), COMM = comm2d, &
1159	INFO = MPI_INFO_NULL )
1160	#endif
1161	ENDIF
1162
1163	CALL handle_netcdf_error( 'check_open', 37 )
1164
1165	!
1166	!-- Define the header
1167	CALL define_netcdf_header( '3d', netcdf_extend, av )
1168
1169	!
1170	!-- In case of parallel NetCDF output, create flag file which tells
1171	!-- combine_plot_fields that nothing is to do.
1172	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1173	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1174	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1175	CLOSE( 99 )
1176	ENDIF
1177
1178	ENDIF
1179
1180
1181	CASE ( 107 )
1182	!
1183	!-- Set filename
1184	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1185
1186	!
1187	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1188	!-- be opened for extension, if its variables match the actual run.
1189	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1190
1191	IF ( netcdf_extend ) THEN
1192	!
1193	!-- Open an existing NetCDF file for output
1194	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1195	CALL handle_netcdf_error( 'check_open', 38 )
1196
1197	!
1198	!-- Read header information and set all ids. If there is a mismatch
1199	!-- between the previuos and the actual run, netcdf_extend is returned
1200	!-- as .FALSE.
1201	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1202
1203	!
1204	!-- Remove the local file, if it can not be extended
1205	IF ( .NOT. netcdf_extend ) THEN
1206	nc_stat = NF90_CLOSE( id_set_sp )
1207	CALL handle_netcdf_error( 'check_open', 39 )
1208	CALL local_system( 'rm ' // TRIM( filename ) )
1209	ENDIF
1210
1211	ENDIF
1212
1213	IF ( .NOT. netcdf_extend ) THEN
1214	!
1215	!-- Create a new NetCDF output file
1216	IF ( netcdf_data_format > 1 ) THEN
1217	nc_stat = NF90_CREATE( filename, &
1218	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1219	id_set_sp )
1220	ELSE
1221	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1222	ENDIF
1223	CALL handle_netcdf_error( 'check_open', 40 )
1224	!
1225	!-- Define the header
1226	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1227
1228	ENDIF
1229
1230
1231	CASE ( 108 )
1232
1233	IF ( myid_char == '' ) THEN
1234	filename = 'DATA_PRT_NETCDF' // coupling_char
1235	ELSE
1236	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1237	myid_char
1238	ENDIF
1239	!
1240	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1241	!-- be opened for extension, if its variables match the actual run.
1242	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1243
1244	IF ( netcdf_extend ) THEN
1245	!
1246	!-- Open an existing NetCDF file for output
1247	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1248	CALL handle_netcdf_error( 'check_open', 41 )
1249	!
1250	!-- Read header information and set all ids. If there is a mismatch
1251	!-- between the previuos and the actual run, netcdf_extend is returned
1252	!-- as .FALSE.
1253	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1254
1255	!
1256	!-- Remove the local file, if it can not be extended
1257	IF ( .NOT. netcdf_extend ) THEN
1258	nc_stat = NF90_CLOSE( id_set_prt )
1259	CALL handle_netcdf_error( 'check_open', 42 )
1260	CALL local_system( 'rm ' // filename )
1261	ENDIF
1262
1263	ENDIF
1264
1265	IF ( .NOT. netcdf_extend ) THEN
1266
1267	!
1268	!-- For runs on multiple processors create the subdirectory
1269	IF ( myid_char /= '' ) THEN
1270	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1271	THEN ! needs modification in case of non-extendable sets
1272	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1273	TRIM( coupling_char ) // '/' )
1274	ENDIF
1275	#if defined( __parallel )
1276	!
1277	!-- Set a barrier in order to allow that all other processors in the
1278	!-- directory created by PE0 can open their file
1279	CALL MPI_BARRIER( comm2d, ierr )
1280	#endif
1281	ENDIF
1282
1283	!
1284	!-- Create a new NetCDF output file with requested NetCDF format
1285	IF ( netcdf_data_format == 1 ) THEN
1286	!
1287	!-- Classic NetCDF format
1288	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1289
1290	ELSEIF ( netcdf_data_format == 2 ) THEN
1291	!
1292	!-- 64bit-offset format
1293	nc_stat = NF90_CREATE( filename, &
1294	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1295	id_set_prt )
1296
1297	#if defined( __netcdf4 )
1298	ELSEIF ( netcdf_data_format == 3 ) THEN
1299	!
1300	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
1301	nc_stat = NF90_CREATE( filename, &
1302	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1303	id_set_prt )
1304
1305	ELSEIF ( netcdf_data_format == 4 ) THEN
1306	!
1307	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
1308	!-- output into a single file!
1309	nc_stat = NF90_CREATE( filename, &
1310	OR( NF90_NOCLOBBER, &
1311	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1312	id_set_prt )
1313	#endif
1314	ENDIF
1315
1316	CALL handle_netcdf_error( 'check_open', 43 )
1317
1318	!
1319	!-- Define the header
1320	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1321
1322	ENDIF
1323
1324	CASE ( 109 )
1325	!
1326	!-- Set filename
1327	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1328
1329	!
1330	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1331	!-- be opened for extension, if its variables match the actual run.
1332	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1333
1334	IF ( netcdf_extend ) THEN
1335	!
1336	!-- Open an existing NetCDF file for output
1337	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1338	CALL handle_netcdf_error( 'check_open', 393 )
1339	!
1340	!-- Read header information and set all ids. If there is a mismatch
1341	!-- between the previuos and the actual run, netcdf_extend is returned
1342	!-- as .FALSE.
1343	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1344
1345	!
1346	!-- Remove the local file, if it can not be extended
1347	IF ( .NOT. netcdf_extend ) THEN
1348	nc_stat = NF90_CLOSE( id_set_pts )
1349	CALL handle_netcdf_error( 'check_open', 394 )
1350	CALL local_system( 'rm ' // TRIM( filename ) )
1351	ENDIF
1352
1353	ENDIF
1354
1355	IF ( .NOT. netcdf_extend ) THEN
1356	!
1357	!-- Create a new NetCDF output file
1358	IF ( netcdf_data_format > 1 ) THEN
1359	nc_stat = NF90_CREATE( filename, &
1360	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1361	id_set_pts )
1362	ELSE
1363	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1364	ENDIF
1365	CALL handle_netcdf_error( 'check_open', 395 )
1366	!
1367	!-- Define the header
1368	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1369
1370	ENDIF
1371
1372	CASE ( 201:200+2*max_masks )
1373	!
1374	!-- Set filename depending on unit number
1375	IF ( file_id <= 200+max_masks ) THEN
1376	mid = file_id - 200
1377	WRITE ( mask_char,'(I2.2)') mid
1378	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1379	av = 0
1380	ELSE
1381	mid = file_id - (200+max_masks)
1382	WRITE ( mask_char,'(I2.2)') mid
1383	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1384	coupling_char
1385	av = 1
1386	ENDIF
1387	!
1388	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1389	!-- be opened for extension, if its dimensions and variables match the
1390	!-- actual run.
1391	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1392
1393	IF ( netcdf_extend ) THEN
1394	!
1395	!-- Open an existing NetCDF file for output
1396	#if defined( __netcdf4 )
1397	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1398	COMM = comm2d, INFO = MPI_INFO_NULL )
1399	#else
1400	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1401	#endif
1402	CALL handle_netcdf_error( 'check_open', 456 )
1403	!
1404	!-- Read header information and set all ids. If there is a mismatch
1405	!-- between the previuos and the actual run, netcdf_extend is returned
1406	!-- as .FALSE.
1407	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1408
1409	!
1410	!-- Remove the local file, if it can not be extended
1411	IF ( .NOT. netcdf_extend ) THEN
1412	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1413	CALL handle_netcdf_error( 'check_open', 457 )
1414	CALL local_system('rm ' // TRIM( filename ) )
1415	ENDIF
1416
1417	ENDIF
1418
1419	IF ( .NOT. netcdf_extend ) THEN
1420	!
1421	!-- Create a new NetCDF output file with requested NetCDF format
1422	IF ( netcdf_data_format == 1 ) THEN
1423	!
1424	!-- Classic NetCDF format
1425	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1426	id_set_mask(mid,av) )
1427
1428	ELSEIF ( netcdf_data_format == 2 ) THEN
1429	!
1430	!-- 64bit-offset format
1431	nc_stat = NF90_CREATE( filename, &
1432	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1433	id_set_mask(mid,av) )
1434
1435
1436	#if defined( __netcdf4 )
1437	ELSEIF ( netcdf_data_format == 3 ) THEN
1438	!
1439	!-- NetCDF4/HDF5 format
1440	nc_stat = NF90_CREATE( filename, &
1441	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1442	id_set_mask(mid,av), COMM = comm2d, &
1443	INFO = MPI_INFO_NULL )
1444
1445	ELSEIF ( netcdf_data_format == 4 ) THEN
1446	!
1447	!-- NetCDF4/HDF5 format with classic model flag
1448	nc_stat = NF90_CREATE( filename, &
1449	OR( NF90_NOCLOBBER, &
1450	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1451	id_set_mask(mid,av), COMM = comm2d, &
1452	INFO = MPI_INFO_NULL )
1453	#endif
1454	ENDIF
1455
1456	CALL handle_netcdf_error( 'check_open', 458 )
1457	!
1458	!-- Define the header
1459	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1460
1461	ENDIF
1462
1463
1464	#else
1465
1466	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1467
1468	!
1469	!-- Nothing is done in case of missing netcdf support
1470	RETURN
1471
1472	#endif
1473
1474	CASE DEFAULT
1475
1476	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1477	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1478
1479	END SELECT
1480
1481	!
1482	!-- Set open flag
1483	openfile(file_id)%opened = .TRUE.
1484
1485	!
1486	!-- Formats
1487	3300 FORMAT ('#'/ &
1488	'coord 1 file=',A,' filetype=unformatted'/ &
1489	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1490	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1491	'#')
1492	4000 FORMAT ('# ',A)
1493	5000 FORMAT ('# ',A/ &
1494	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1495	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1496	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1497	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1498	8000 FORMAT (A/ &
1499	' step time # of parts lPE sent/recv rPE sent/recv ',&
1500	'sPE sent/recv nPE sent/recv max # of parts'/ &
1501	103('-'))
1502
1503	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |