Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 2381

Last change on this file since 2381 was 2300, checked in by raasch, 7 years ago
NEC related code partly removed, host variable partly removed, host specific code completely removed, default values for host, loop_optimization and termination time_needed changed
Property svn:keywords set to `Id`
File size: 44.1 KB

Line
1	!> @file check_open.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU fGeneral Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2017 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_open.f90 2300 2017-06-29 13:31:14Z raasch $
27	! -host
28	!
29	! 2298 2017-06-29 09:28:18Z raasch
30	! -return_addres, return_username, avs_coor_file_..., avs_data_file_...,
31	! cross_ts_numbers, cross_ts_number_count
32	!
33	! 2101 2017-01-05 16:42:31Z suehring
34	!
35	! 2063 2016-11-10 17:14:35Z raasch
36	! bugfix: opening of PROGRESS file moved out of the NetCDF block
37	!
38	! 2040 2016-10-26 16:58:09Z gronemeier
39	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
40	!
41	! 2000 2016-08-20 18:09:15Z knoop
42	! Forced header and separation lines into 80 columns
43	!
44	! 1988 2016-08-10 14:49:06Z gronemeier
45	! informative message added if files cannot be opened in newly created directory
46	!
47	! 1986 2016-08-10 14:07:17Z gronemeier
48	! Bugfix: check if output can be opened in newly created directory. If not
49	! wait one second and try again.
50	!
51	! 1974 2016-07-26 08:43:25Z gronemeier
52	! Bugfix: MPI barriers after deleting non-extendable files must only be called
53	! in case of parallel I/O
54	!
55	! 1957 2016-07-07 10:43:48Z suehring
56	! flight module added
57	!
58	! 1804 2016-04-05 16:30:18Z maronga
59	! Removed code for parameter file check (__check)
60	!
61	! 1783 2016-03-06 18:36:17Z raasch
62	! name change of netcdf routines and module + related changes
63	!
64	! 1779 2016-03-03 08:01:28Z raasch
65	! coupling_char is trimmed at every place it occurs, because it can have
66	! different length now
67	!
68	! 1745 2016-02-05 13:06:51Z gronemeier
69	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
70	!
71	! 1682 2015-10-07 23:56:08Z knoop
72	! Code annotations made doxygen readable
73	!
74	! 1551 2015-03-03 14:18:16Z maronga
75	! Removed redundant output for combine_plot_fields
76	!
77	! 1468 2014-09-24 14:06:57Z maronga
78	! Adapted for use on up to 6-digit processor cores
79	! Added file unit 117 (PROGRESS)
80	!
81	! 1359 2014-04-11 17:15:14Z hoffmann
82	! Format of particle exchange statistics extended to reasonable numbers of
83	! particles.
84	!
85	! 1353 2014-04-08 15:21:23Z heinze
86	! REAL constants provided with KIND-attribute,
87	! declaration for unused variables xkoor, ykoor, zkoor removed
88	!
89	! 1327 2014-03-21 11:00:16Z raasch
90	! parts concerning iso2d and avs output removed
91	!
92	! 1320 2014-03-20 08:40:49Z raasch
93	! ONLY-attribute added to USE-statements,
94	! kind-parameters added to all INTEGER and REAL declaration statements,
95	! kinds are defined in new module kinds,
96	! old module precision_kind is removed,
97	! revision history before 2012 removed,
98	! comment fields (!:) to be used for variable explanations added to
99	! all variable declaration statements
100	!
101	! 1106 2013-03-04 05:31:38Z raasch
102	! array_kind renamed precision_kind
103	!
104	! 1092 2013-02-02 11:24:22Z raasch
105	! unused variables removed
106	!
107	! 1036 2012-10-22 13:43:42Z raasch
108	! code put under GPL (PALM 3.9)
109	!
110	! 1031 2012-10-19 14:35:30Z raasch
111	! netCDF4 without parallel file support implemented,
112	! opening of netCDF files are done by new routines create_netcdf_file and
113	! open_write_netcdf_file
114	!
115	! 964 2012-07-26 09:14:24Z raasch
116	! old profil-units (40:49) removed,
117	! append feature removed from unit 14
118	!
119	! 849 2012-03-15 10:35:09Z raasch
120	! comment changed
121	!
122	! 809 2012-01-30 13:32:58Z maronga
123	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
124	!
125	! 807 2012-01-25 11:53:51Z maronga
126	! New cpp directive "__check" implemented which is used by check_namelist_files
127	!
128	! Revision 1.1 1997/08/11 06:10:55 raasch
129	! Initial revision
130	!
131	!
132	! Description:
133	! ------------
134	!> Check if file unit is open. If not, open file and, if necessary, write a
135	!> header or start other initializing actions, respectively.
136	!------------------------------------------------------------------------------!
137	SUBROUTINE check_open( file_id )
138
139
140	USE arrays_3d, &
141	ONLY: zu
142
143	USE control_parameters, &
144	ONLY: coupling_char, data_output_2d_on_each_pe, max_masks, &
145	message_string, mid, nz_do3d, openfile, run_description_header, &
146	runnr
147
148	USE grid_variables, &
149	ONLY: dx, dy
150
151	USE indices, &
152	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
153
154	USE kinds
155
156	#if defined( __netcdf )
157	USE NETCDF
158	#endif
159
160	USE netcdf_interface, &
161	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
162	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
163	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
164	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
165
166	USE particle_attributes, &
167	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
168	particle_groups
169
170	USE pegrid
171
172	USE posix_calls_from_fortran, &
173	ONLY: fortran_sleep
174
175
176	IMPLICIT NONE
177
178	CHARACTER (LEN=2) :: mask_char !<
179	CHARACTER (LEN=2) :: suffix !<
180	CHARACTER (LEN=20) :: xtext = 'time in s' !<
181	CHARACTER (LEN=30) :: filename !<
182	CHARACTER (LEN=80) :: rtext !<
183	CHARACTER (LEN=100) :: batch_scp !<
184	CHARACTER (LEN=100) :: line !<
185	CHARACTER (LEN=400) :: command !<
186
187	INTEGER(iwp) :: av !<
188	INTEGER(iwp) :: numline = 1 !<
189	INTEGER(iwp) :: cranz !<
190	INTEGER(iwp) :: file_id !<
191	INTEGER(iwp) :: i !<
192	INTEGER(iwp) :: iaddres !<
193	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
194	INTEGER(iwp) :: iusern !<
195	INTEGER(iwp) :: j !<
196	INTEGER(iwp) :: k !<
197	INTEGER(iwp) :: legpos = 1 !<
198	INTEGER(iwp) :: timodex = 1 !<
199
200	INTEGER(iwp), DIMENSION(10) :: klist !<
201
202	LOGICAL :: datleg = .TRUE. !<
203	LOGICAL :: get_filenames !<
204	LOGICAL :: grid = .TRUE. !<
205	LOGICAL :: netcdf_extend !<
206	LOGICAL :: rand = .TRUE. !<
207	LOGICAL :: swap = .TRUE. !<
208	LOGICAL :: twoxa = .TRUE. !<
209	LOGICAL :: twoya = .TRUE. !<
210
211	REAL(wp) :: ansx = -999.999_wp !<
212	REAL(wp) :: ansy = -999.999_wp !<
213	REAL(wp) :: gwid = 0.1_wp !<
214	REAL(wp) :: rlegfak = 1.5_wp !<
215	REAL(wp) :: sizex = 250.0_wp !<
216	REAL(wp) :: sizey = 40.0_wp !<
217	REAL(wp) :: texfac = 1.5_wp !<
218
219	REAL(wp), DIMENSION(:), ALLOCATABLE :: eta !<
220	REAL(wp), DIMENSION(:), ALLOCATABLE :: ho !<
221	REAL(wp), DIMENSION(:), ALLOCATABLE :: hu !<
222
223
224
225	NAMELIST /RAHMEN/ numline, cranz, datleg, rtext, swap
226	NAMELIST /CROSS/ ansx, ansy, grid, gwid, klist, legpos, &
227	rand, rlegfak, sizex, sizey, texfac, &
228	timodex, twoxa, twoya, xtext
229
230
231	!
232	!-- Immediate return if file already open
233	IF ( openfile(file_id)%opened ) RETURN
234
235	!
236	!-- Only certain files are allowed to be re-opened
237	!-- NOTE: some of the other files perhaps also could be re-opened, but it
238	!-- has not been checked so far, if it works!
239	IF ( openfile(file_id)%opened_before ) THEN
240	SELECT CASE ( file_id )
241	CASE ( 13, 14, 21, 22, 23, 80:85, 117 )
242	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
243	message_string = 're-open of unit ' // &
244	'14 is not verified. Please check results!'
245	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
246	ENDIF
247
248	CASE DEFAULT
249	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
250	' is not allowed'
251	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
252
253	RETURN
254
255	END SELECT
256	ENDIF
257
258	!
259	!-- Check if file may be opened on the relevant PE
260	SELECT CASE ( file_id )
261
262	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109, 117 )
263
264	IF ( myid /= 0 ) THEN
265	WRITE( message_string, * ) 'opening file-id ',file_id, &
266	' not allowed for PE ',myid
267	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
268	ENDIF
269
270	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
271
272	IF ( netcdf_data_format < 5 ) THEN
273
274	IF ( myid /= 0 ) THEN
275	WRITE( message_string, * ) 'opening file-id ',file_id, &
276	' not allowed for PE ',myid
277	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
278	ENDIF
279
280	ENDIF
281
282	CASE ( 21, 22, 23 )
283
284	IF ( .NOT. data_output_2d_on_each_pe ) THEN
285	IF ( myid /= 0 ) THEN
286	WRITE( message_string, * ) 'opening file-id ',file_id, &
287	' not allowed for PE ',myid
288	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
289	END IF
290	ENDIF
291
292	CASE ( 27, 28, 29, 31, 33, 71:73, 90:99 )
293
294	!
295	!-- File-ids that are used temporarily in other routines
296	WRITE( message_string, * ) 'opening file-id ',file_id, &
297	' is not allowed since it is used otherwise'
298	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
299
300	END SELECT
301
302	!
303	!-- Open relevant files
304	SELECT CASE ( file_id )
305
306	CASE ( 11 )
307
308	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
309	STATUS='OLD' )
310
311	CASE ( 13 )
312
313	IF ( myid_char == '' ) THEN
314	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
315	FORM='UNFORMATTED', STATUS='OLD' )
316	ELSE
317	!
318	!-- First opening of unit 13 openes file _000000 on all PEs because
319	!-- only this file contains the global variables
320	IF ( .NOT. openfile(file_id)%opened_before ) THEN
321	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
322	FORM='UNFORMATTED', STATUS='OLD' )
323	ELSE
324	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
325	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
326	ENDIF
327	ENDIF
328
329	CASE ( 14 )
330
331	IF ( myid_char == '' ) THEN
332	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
333	FORM='UNFORMATTED', POSITION='APPEND' )
334	ELSE
335	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
336	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
337	ENDIF
338	#if defined( __parallel )
339	!
340	!-- Set a barrier in order to allow that all other processors in the
341	!-- directory created by PE0 can open their file
342	CALL MPI_BARRIER( comm2d, ierr )
343	#endif
344	ioerr = 1
345	DO WHILE ( ioerr /= 0 )
346	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
347	FORM='UNFORMATTED', IOSTAT=ioerr )
348	IF ( ioerr /= 0 ) THEN
349	WRITE( 9, * ) '*** could not open "BINOUT'// &
350	TRIM(coupling_char)//'/'//myid_char// &
351	'"! Trying again in 1 sec.'
352	CALL fortran_sleep( 1 )
353	ENDIF
354	ENDDO
355
356	ENDIF
357
358	CASE ( 15 )
359
360	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
361	FORM='FORMATTED' )
362
363	CASE ( 16 )
364
365	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
366	FORM='FORMATTED' )
367
368	CASE ( 17 )
369
370	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
371	FORM='FORMATTED' )
372
373	CASE ( 18 )
374
375	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
376	FORM='FORMATTED' )
377
378	CASE ( 19 )
379
380	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
381
382	CASE ( 20 )
383
384	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
385	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
386	ENDIF
387	IF ( myid_char == '' ) THEN
388	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
389	FORM='UNFORMATTED', POSITION='APPEND' )
390	ELSE
391	#if defined( __parallel )
392	!
393	!-- Set a barrier in order to allow that all other processors in the
394	!-- directory created by PE0 can open their file
395	CALL MPI_BARRIER( comm2d, ierr )
396	#endif
397	ioerr = 1
398	DO WHILE ( ioerr /= 0 )
399	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
400	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
401	IOSTAT=ioerr )
402	IF ( ioerr /= 0 ) THEN
403	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
404	TRIM( coupling_char )//'/'//myid_char// &
405	'"! Trying again in 1 sec.'
406	CALL fortran_sleep( 1 )
407	ENDIF
408	ENDDO
409
410	ENDIF
411
412	CASE ( 21 )
413
414	IF ( data_output_2d_on_each_pe ) THEN
415	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
416	FORM='UNFORMATTED', POSITION='APPEND' )
417	ELSE
418	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
419	FORM='UNFORMATTED', POSITION='APPEND' )
420	ENDIF
421
422	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
423	!
424	!-- Output for combine_plot_fields
425	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
426	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
427	WRITE (21) 0, nx+1, 0, ny+1 ! output part
428	ENDIF
429	!
430	!-- Determine and write ISO2D coordiante header
431	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
432	hu = 0.0_wp
433	ho = (ny+1) * dy
434	DO i = 1, ny
435	eta(i) = REAL( i ) / ( ny + 1.0_wp )
436	ENDDO
437	eta(0) = 0.0_wp
438	eta(ny+1) = 1.0_wp
439
440	WRITE (21) dx,eta,hu,ho
441	DEALLOCATE( eta, ho, hu )
442
443	ENDIF
444
445	CASE ( 22 )
446
447	IF ( data_output_2d_on_each_pe ) THEN
448	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
449	FORM='UNFORMATTED', POSITION='APPEND' )
450	ELSE
451	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
452	FORM='UNFORMATTED', POSITION='APPEND' )
453	ENDIF
454
455	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
456	!
457	!-- Output for combine_plot_fields
458	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
459	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
460	WRITE (22) 0, nx+1, 0, nz+1 ! output part
461	ENDIF
462	!
463	!-- Determine and write ISO2D coordinate header
464	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
465	hu = 0.0_wp
466	ho = zu(nz+1)
467	DO i = 1, nz
468	eta(i) = REAL( zu(i) ) / zu(nz+1)
469	ENDDO
470	eta(0) = 0.0_wp
471	eta(nz+1) = 1.0_wp
472
473	WRITE (22) dx,eta,hu,ho
474	DEALLOCATE( eta, ho, hu )
475
476	ENDIF
477
478	CASE ( 23 )
479
480	IF ( data_output_2d_on_each_pe ) THEN
481	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
482	FORM='UNFORMATTED', POSITION='APPEND' )
483	ELSE
484	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
485	FORM='UNFORMATTED', POSITION='APPEND' )
486	ENDIF
487
488	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
489	!
490	!-- Output for combine_plot_fields
491	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
492	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
493	WRITE (23) 0, ny+1, 0, nz+1 ! output part
494	ENDIF
495	!
496	!-- Determine and write ISO2D coordiante header
497	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
498	hu = 0.0_wp
499	ho = zu(nz+1)
500	DO i = 1, nz
501	eta(i) = REAL( zu(i) ) / zu(nz+1)
502	ENDDO
503	eta(0) = 0.0_wp
504	eta(nz+1) = 1.0_wp
505
506	WRITE (23) dx,eta,hu,ho
507	DEALLOCATE( eta, ho, hu )
508
509	ENDIF
510
511	CASE ( 30 )
512
513	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
514	FORM='UNFORMATTED' )
515	!
516	!-- Write coordinate file for AVS
517	IF ( myid == 0 ) THEN
518	#if defined( __parallel )
519	!
520	!-- Specifications for combine_plot_fields
521	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp
522	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
523	#endif
524	ENDIF
525
526	CASE ( 80 )
527
528	IF ( myid_char == '' ) THEN
529	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
530	FORM='FORMATTED', POSITION='APPEND' )
531	ELSE
532	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
533	CALL local_system( 'mkdir PARTICLE_INFOS' // &
534	TRIM( coupling_char ) )
535	ENDIF
536	#if defined( __parallel )
537	!
538	!-- Set a barrier in order to allow that thereafter all other
539	!-- processors in the directory created by PE0 can open their file.
540	!-- WARNING: The following barrier will lead to hanging jobs, if
541	!-- check_open is first called from routine
542	!-- allocate_prt_memory!
543	IF ( .NOT. openfile(80)%opened_before ) THEN
544	CALL MPI_BARRIER( comm2d, ierr )
545	ENDIF
546	#endif
547	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
548	myid_char, &
549	FORM='FORMATTED', POSITION='APPEND' )
550	ENDIF
551
552	IF ( .NOT. openfile(80)%opened_before ) THEN
553	WRITE ( 80, 8000 ) TRIM( run_description_header )
554	ENDIF
555
556	CASE ( 81 )
557
558	OPEN ( 81, FILE='PLOTSP_X_PAR'//TRIM( coupling_char ), &
559	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
560	POSITION='APPEND' )
561
562	CASE ( 82 )
563
564	OPEN ( 82, FILE='PLOTSP_X_DATA'//TRIM( coupling_char ), &
565	FORM='FORMATTED', POSITION = 'APPEND' )
566
567	CASE ( 83 )
568
569	OPEN ( 83, FILE='PLOTSP_Y_PAR'//TRIM( coupling_char ), &
570	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
571	POSITION='APPEND' )
572
573	CASE ( 84 )
574
575	OPEN ( 84, FILE='PLOTSP_Y_DATA'//TRIM( coupling_char ), &
576	FORM='FORMATTED', POSITION='APPEND' )
577
578	CASE ( 85 )
579
580	IF ( myid_char == '' ) THEN
581	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
582	FORM='UNFORMATTED', POSITION='APPEND' )
583	ELSE
584	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
585	CALL local_system( 'mkdir PARTICLE_DATA' // &
586	TRIM( coupling_char ) )
587	ENDIF
588	#if defined( __parallel )
589	!
590	!-- Set a barrier in order to allow that thereafter all other
591	!-- processors in the directory created by PE0 can open their file
592	CALL MPI_BARRIER( comm2d, ierr )
593	#endif
594	ioerr = 1
595	DO WHILE ( ioerr /= 0 )
596	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
597	myid_char, &
598	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
599	IF ( ioerr /= 0 ) THEN
600	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
601	TRIM( coupling_char )//'/'//myid_char// &
602	'"! Trying again in 1 sec.'
603	CALL fortran_sleep( 1 )
604	ENDIF
605	ENDDO
606
607	ENDIF
608
609	IF ( .NOT. openfile(85)%opened_before ) THEN
610	WRITE ( 85 ) run_description_header
611	!
612	!-- Attention: change version number whenever the output format on
613	!-- unit 85 is changed (see also in routine
614	!-- lpm_data_output_particles)
615	rtext = 'data format version 3.1'
616	WRITE ( 85 ) rtext
617	WRITE ( 85 ) number_of_particle_groups, &
618	max_number_of_particle_groups
619	WRITE ( 85 ) particle_groups
620	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
621	ENDIF
622
623	!
624	!-- Progress file that is used by the PALM watchdog
625	CASE ( 117 )
626
627	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
628	STATUS='REPLACE', FORM='FORMATTED' )
629
630	#if defined( __netcdf )
631	CASE ( 101, 111 )
632	!
633	!-- Set filename depending on unit number
634	IF ( file_id == 101 ) THEN
635	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
636	av = 0
637	ELSE
638	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
639	av = 1
640	ENDIF
641	!
642	!-- Inquire, if there is a netCDF file from a previuos run. This should
643	!-- be opened for extension, if its dimensions and variables match the
644	!-- actual run.
645	INQUIRE( FILE=filename, EXIST=netcdf_extend )
646	IF ( netcdf_extend ) THEN
647	!
648	!-- Open an existing netCDF file for output
649	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
650	!
651	!-- Read header information and set all ids. If there is a mismatch
652	!-- between the previuos and the actual run, netcdf_extend is returned
653	!-- as .FALSE.
654	CALL netcdf_define_header( 'xy', netcdf_extend, av )
655
656	!
657	!-- Remove the local file, if it can not be extended
658	IF ( .NOT. netcdf_extend ) THEN
659	nc_stat = NF90_CLOSE( id_set_xy(av) )
660	CALL netcdf_handle_error( 'check_open', 21 )
661	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
662	#if defined( __parallel )
663	!
664	!-- Set a barrier in order to assure that PE0 deleted the old file
665	!-- before any other processor tries to open a new file.
666	!-- Barrier is only needed in case of parallel I/O
667	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
668	#endif
669	ENDIF
670
671	ENDIF
672
673	IF ( .NOT. netcdf_extend ) THEN
674	!
675	!-- Create a new netCDF output file with requested netCDF format
676	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
677
678	!
679	!-- Define the header
680	CALL netcdf_define_header( 'xy', netcdf_extend, av )
681
682	!
683	!-- In case of parallel netCDF output, create flag file which tells
684	!-- combine_plot_fields that nothing is to do.
685	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
686	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
687	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
688	CLOSE( 99 )
689	ENDIF
690
691	ENDIF
692
693	CASE ( 102, 112 )
694	!
695	!-- Set filename depending on unit number
696	IF ( file_id == 102 ) THEN
697	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
698	av = 0
699	ELSE
700	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
701	av = 1
702	ENDIF
703	!
704	!-- Inquire, if there is a netCDF file from a previuos run. This should
705	!-- be opened for extension, if its dimensions and variables match the
706	!-- actual run.
707	INQUIRE( FILE=filename, EXIST=netcdf_extend )
708
709	IF ( netcdf_extend ) THEN
710	!
711	!-- Open an existing netCDF file for output
712	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
713	!
714	!-- Read header information and set all ids. If there is a mismatch
715	!-- between the previuos and the actual run, netcdf_extend is returned
716	!-- as .FALSE.
717	CALL netcdf_define_header( 'xz', netcdf_extend, av )
718
719	!
720	!-- Remove the local file, if it can not be extended
721	IF ( .NOT. netcdf_extend ) THEN
722	nc_stat = NF90_CLOSE( id_set_xz(av) )
723	CALL netcdf_handle_error( 'check_open', 24 )
724	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
725	#if defined( __parallel )
726	!
727	!-- Set a barrier in order to assure that PE0 deleted the old file
728	!-- before any other processor tries to open a new file
729	!-- Barrier is only needed in case of parallel I/O
730	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
731	#endif
732	ENDIF
733
734	ENDIF
735
736	IF ( .NOT. netcdf_extend ) THEN
737	!
738	!-- Create a new netCDF output file with requested netCDF format
739	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
740
741	!
742	!-- Define the header
743	CALL netcdf_define_header( 'xz', netcdf_extend, av )
744
745	!
746	!-- In case of parallel netCDF output, create flag file which tells
747	!-- combine_plot_fields that nothing is to do.
748	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
749	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
750	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
751	CLOSE( 99 )
752	ENDIF
753
754	ENDIF
755
756	CASE ( 103, 113 )
757	!
758	!-- Set filename depending on unit number
759	IF ( file_id == 103 ) THEN
760	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
761	av = 0
762	ELSE
763	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
764	av = 1
765	ENDIF
766	!
767	!-- Inquire, if there is a netCDF file from a previuos run. This should
768	!-- be opened for extension, if its dimensions and variables match the
769	!-- actual run.
770	INQUIRE( FILE=filename, EXIST=netcdf_extend )
771
772	IF ( netcdf_extend ) THEN
773	!
774	!-- Open an existing netCDF file for output
775	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
776	!
777	!-- Read header information and set all ids. If there is a mismatch
778	!-- between the previuos and the actual run, netcdf_extend is returned
779	!-- as .FALSE.
780	CALL netcdf_define_header( 'yz', netcdf_extend, av )
781
782	!
783	!-- Remove the local file, if it can not be extended
784	IF ( .NOT. netcdf_extend ) THEN
785	nc_stat = NF90_CLOSE( id_set_yz(av) )
786	CALL netcdf_handle_error( 'check_open', 27 )
787	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
788	#if defined( __parallel )
789	!
790	!-- Set a barrier in order to assure that PE0 deleted the old file
791	!-- before any other processor tries to open a new file
792	!-- Barrier is only needed in case of parallel I/O
793	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
794	#endif
795	ENDIF
796
797	ENDIF
798
799	IF ( .NOT. netcdf_extend ) THEN
800	!
801	!-- Create a new netCDF output file with requested netCDF format
802	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
803
804	!
805	!-- Define the header
806	CALL netcdf_define_header( 'yz', netcdf_extend, av )
807
808	!
809	!-- In case of parallel netCDF output, create flag file which tells
810	!-- combine_plot_fields that nothing is to do.
811	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
812	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
813	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
814	CLOSE( 99 )
815	ENDIF
816
817	ENDIF
818
819	CASE ( 104 )
820	!
821	!-- Set filename
822	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
823
824	!
825	!-- Inquire, if there is a netCDF file from a previuos run. This should
826	!-- be opened for extension, if its variables match the actual run.
827	INQUIRE( FILE=filename, EXIST=netcdf_extend )
828
829	IF ( netcdf_extend ) THEN
830	!
831	!-- Open an existing netCDF file for output
832	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
833	!
834	!-- Read header information and set all ids. If there is a mismatch
835	!-- between the previuos and the actual run, netcdf_extend is returned
836	!-- as .FALSE.
837	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
838
839	!
840	!-- Remove the local file, if it can not be extended
841	IF ( .NOT. netcdf_extend ) THEN
842	nc_stat = NF90_CLOSE( id_set_pr )
843	CALL netcdf_handle_error( 'check_open', 30 )
844	CALL local_system( 'rm ' // TRIM( filename ) )
845	ENDIF
846
847	ENDIF
848
849	IF ( .NOT. netcdf_extend ) THEN
850	!
851	!-- Create a new netCDF output file with requested netCDF format
852	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
853	!
854	!-- Define the header
855	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
856
857	ENDIF
858
859	CASE ( 105 )
860	!
861	!-- Set filename
862	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
863
864	!
865	!-- Inquire, if there is a netCDF file from a previuos run. This should
866	!-- be opened for extension, if its variables match the actual run.
867	INQUIRE( FILE=filename, EXIST=netcdf_extend )
868
869	IF ( netcdf_extend ) THEN
870	!
871	!-- Open an existing netCDF file for output
872	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
873	!
874	!-- Read header information and set all ids. If there is a mismatch
875	!-- between the previuos and the actual run, netcdf_extend is returned
876	!-- as .FALSE.
877	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
878
879	!
880	!-- Remove the local file, if it can not be extended
881	IF ( .NOT. netcdf_extend ) THEN
882	nc_stat = NF90_CLOSE( id_set_ts )
883	CALL netcdf_handle_error( 'check_open', 33 )
884	CALL local_system( 'rm ' // TRIM( filename ) )
885	ENDIF
886
887	ENDIF
888
889	IF ( .NOT. netcdf_extend ) THEN
890	!
891	!-- Create a new netCDF output file with requested netCDF format
892	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
893	!
894	!-- Define the header
895	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
896
897	ENDIF
898
899
900	CASE ( 106, 116 )
901	!
902	!-- Set filename depending on unit number
903	IF ( file_id == 106 ) THEN
904	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
905	av = 0
906	ELSE
907	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
908	av = 1
909	ENDIF
910	!
911	!-- Inquire, if there is a netCDF file from a previous run. This should
912	!-- be opened for extension, if its dimensions and variables match the
913	!-- actual run.
914	INQUIRE( FILE=filename, EXIST=netcdf_extend )
915
916	IF ( netcdf_extend ) THEN
917	!
918	!-- Open an existing netCDF file for output
919	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
920	!
921	!-- Read header information and set all ids. If there is a mismatch
922	!-- between the previuos and the actual run, netcdf_extend is returned
923	!-- as .FALSE.
924	CALL netcdf_define_header( '3d', netcdf_extend, av )
925
926	!
927	!-- Remove the local file, if it can not be extended
928	IF ( .NOT. netcdf_extend ) THEN
929	nc_stat = NF90_CLOSE( id_set_3d(av) )
930	CALL netcdf_handle_error( 'check_open', 36 )
931	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
932	#if defined( __parallel )
933	!
934	!-- Set a barrier in order to assure that PE0 deleted the old file
935	!-- before any other processor tries to open a new file
936	!-- Barrier is only needed in case of parallel I/O
937	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
938	#endif
939	ENDIF
940
941	ENDIF
942
943	IF ( .NOT. netcdf_extend ) THEN
944	!
945	!-- Create a new netCDF output file with requested netCDF format
946	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
947
948	!
949	!-- Define the header
950	CALL netcdf_define_header( '3d', netcdf_extend, av )
951
952	!
953	!-- In case of parallel netCDF output, create flag file which tells
954	!-- combine_plot_fields that nothing is to do.
955	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
956	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
957	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
958	CLOSE( 99 )
959	ENDIF
960
961	ENDIF
962
963
964	CASE ( 107 )
965	!
966	!-- Set filename
967	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
968
969	!
970	!-- Inquire, if there is a netCDF file from a previuos run. This should
971	!-- be opened for extension, if its variables match the actual run.
972	INQUIRE( FILE=filename, EXIST=netcdf_extend )
973
974	IF ( netcdf_extend ) THEN
975	!
976	!-- Open an existing netCDF file for output
977	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
978
979	!
980	!-- Read header information and set all ids. If there is a mismatch
981	!-- between the previuos and the actual run, netcdf_extend is returned
982	!-- as .FALSE.
983	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
984
985	!
986	!-- Remove the local file, if it can not be extended
987	IF ( .NOT. netcdf_extend ) THEN
988	nc_stat = NF90_CLOSE( id_set_sp )
989	CALL netcdf_handle_error( 'check_open', 39 )
990	CALL local_system( 'rm ' // TRIM( filename ) )
991	ENDIF
992
993	ENDIF
994
995	IF ( .NOT. netcdf_extend ) THEN
996	!
997	!-- Create a new netCDF output file with requested netCDF format
998	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
999	!
1000	!-- Define the header
1001	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
1002
1003	ENDIF
1004
1005
1006	CASE ( 108 )
1007
1008	IF ( myid_char == '' ) THEN
1009	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
1010	ELSE
1011	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1012	myid_char
1013	ENDIF
1014	!
1015	!-- Inquire, if there is a netCDF file from a previuos run. This should
1016	!-- be opened for extension, if its variables match the actual run.
1017	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1018
1019	IF ( netcdf_extend ) THEN
1020	!
1021	!-- Open an existing netCDF file for output
1022	CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
1023	!
1024	!-- Read header information and set all ids. If there is a mismatch
1025	!-- between the previuos and the actual run, netcdf_extend is returned
1026	!-- as .FALSE.
1027	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
1028
1029	!
1030	!-- Remove the local file, if it can not be extended
1031	IF ( .NOT. netcdf_extend ) THEN
1032	nc_stat = NF90_CLOSE( id_set_prt )
1033	CALL netcdf_handle_error( 'check_open', 42 )
1034	CALL local_system( 'rm ' // TRIM( filename ) )
1035	ENDIF
1036
1037	ENDIF
1038
1039	IF ( .NOT. netcdf_extend ) THEN
1040
1041	!
1042	!-- For runs on multiple processors create the subdirectory
1043	IF ( myid_char /= '' ) THEN
1044	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1045	THEN ! needs modification in case of non-extendable sets
1046	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1047	TRIM( coupling_char ) // '/' )
1048	ENDIF
1049	#if defined( __parallel )
1050	!
1051	!-- Set a barrier in order to allow that all other processors in the
1052	!-- directory created by PE0 can open their file
1053	CALL MPI_BARRIER( comm2d, ierr )
1054	#endif
1055	ENDIF
1056
1057	!
1058	!-- Create a new netCDF output file with requested netCDF format
1059	CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
1060
1061	!
1062	!-- Define the header
1063	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
1064
1065	ENDIF
1066
1067	CASE ( 109 )
1068	!
1069	!-- Set filename
1070	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
1071
1072	!
1073	!-- Inquire, if there is a netCDF file from a previuos run. This should
1074	!-- be opened for extension, if its variables match the actual run.
1075	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1076
1077	IF ( netcdf_extend ) THEN
1078	!
1079	!-- Open an existing netCDF file for output
1080	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
1081	!
1082	!-- Read header information and set all ids. If there is a mismatch
1083	!-- between the previuos and the actual run, netcdf_extend is returned
1084	!-- as .FALSE.
1085	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
1086
1087	!
1088	!-- Remove the local file, if it can not be extended
1089	IF ( .NOT. netcdf_extend ) THEN
1090	nc_stat = NF90_CLOSE( id_set_pts )
1091	CALL netcdf_handle_error( 'check_open', 394 )
1092	CALL local_system( 'rm ' // TRIM( filename ) )
1093	ENDIF
1094
1095	ENDIF
1096
1097	IF ( .NOT. netcdf_extend ) THEN
1098	!
1099	!-- Create a new netCDF output file with requested netCDF format
1100	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
1101	!
1102	!-- Define the header
1103	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
1104
1105	ENDIF
1106
1107	!
1108	!-- nc-file for virtual flight measurements
1109	CASE ( 199 )
1110	!
1111	!-- Set filename
1112	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
1113
1114	!
1115	!-- Inquire, if there is a netCDF file from a previuos run. This should
1116	!-- be opened for extension, if its variables match the actual run.
1117	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1118
1119	IF ( netcdf_extend ) THEN
1120	!
1121	!-- Open an existing netCDF file for output
1122	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
1123	!
1124	!-- Read header information and set all ids. If there is a mismatch
1125	!-- between the previuos and the actual run, netcdf_extend is returned
1126	!-- as .FALSE.
1127	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
1128
1129	!
1130	!-- Remove the local file, if it can not be extended
1131	IF ( .NOT. netcdf_extend ) THEN
1132	nc_stat = NF90_CLOSE( id_set_fl )
1133	CALL netcdf_handle_error( 'check_open', 533 )
1134	CALL local_system( 'rm ' // TRIM( filename ) )
1135	ENDIF
1136
1137	ENDIF
1138
1139	IF ( .NOT. netcdf_extend ) THEN
1140	!
1141	!-- Create a new netCDF output file with requested netCDF format
1142	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
1143	!
1144	!-- Define the header
1145	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
1146
1147	ENDIF
1148
1149
1150	CASE ( 201:200+2*max_masks )
1151	!
1152	!-- Set filename depending on unit number
1153	IF ( file_id <= 200+max_masks ) THEN
1154	mid = file_id - 200
1155	WRITE ( mask_char,'(I2.2)') mid
1156	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // &
1157	TRIM( coupling_char )
1158	av = 0
1159	ELSE
1160	mid = file_id - (200+max_masks)
1161	WRITE ( mask_char,'(I2.2)') mid
1162	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1163	TRIM( coupling_char )
1164	av = 1
1165	ENDIF
1166	!
1167	!-- Inquire, if there is a netCDF file from a previuos run. This should
1168	!-- be opened for extension, if its dimensions and variables match the
1169	!-- actual run.
1170	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1171
1172	IF ( netcdf_extend ) THEN
1173	!
1174	!-- Open an existing netCDF file for output
1175	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
1176	.TRUE., 456 )
1177	!
1178	!-- Read header information and set all ids. If there is a mismatch
1179	!-- between the previuos and the actual run, netcdf_extend is returned
1180	!-- as .FALSE.
1181	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
1182
1183	!
1184	!-- Remove the local file, if it can not be extended
1185	IF ( .NOT. netcdf_extend ) THEN
1186	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1187	CALL netcdf_handle_error( 'check_open', 457 )
1188	CALL local_system('rm ' // TRIM( filename ) )
1189	ENDIF
1190
1191	ENDIF
1192
1193	IF ( .NOT. netcdf_extend ) THEN
1194	!
1195	!-- Create a new netCDF output file with requested netCDF format
1196	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
1197	!
1198	!-- Define the header
1199	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
1200
1201	ENDIF
1202
1203
1204	#else
1205
1206	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1207
1208	!
1209	!-- Nothing is done in case of missing netcdf support
1210	RETURN
1211
1212	#endif
1213
1214	CASE DEFAULT
1215
1216	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1217	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1218
1219	END SELECT
1220
1221	!
1222	!-- Set open flag
1223	openfile(file_id)%opened = .TRUE.
1224
1225	!
1226	!-- Formats
1227	3300 FORMAT ('#'/ &
1228	'coord 1 file=',A,' filetype=unformatted'/ &
1229	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1230	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1231	'#')
1232	4000 FORMAT ('# ',A)
1233	5000 FORMAT ('# ',A/ &
1234	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1235	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1236	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1237	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1238	8000 FORMAT (A/ &
1239	' step time # of parts lPE sent/recv rPE sent/recv ',&
1240	'sPE sent/recv nPE sent/recv max # of parts '/ &
1241	109('-'))
1242
1243	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |