Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 69

Last change on this file since 69 was 46, checked in by raasch, 18 years ago
updating parts of Marcus changes
Property svn:keywords set to `Id`
File size: 44.4 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_open.f90 46 2007-03-05 06:00:47Z raasch $
11	! RCS Log replace by Id keyword, revision history cleaned up
12	!
13	! Revision 1.44 2006/08/22 13:48:34 raasch
14	! xz and yz cross sections now up to nzt+1
15	!
16	! Revision 1.1 1997/08/11 06:10:55 raasch
17	! Initial revision
18	!
19	!
20	! Description:
21	! ------------
22	! Check if file unit is open. If not, open file and, if necessary, write a
23	! header or start other initializing actions, respectively.
24	!------------------------------------------------------------------------------!
25
26	USE array_kind
27	USE arrays_3d
28	USE control_parameters
29	USE grid_variables
30	USE indices
31	USE netcdf_control
32	USE particle_attributes
33	USE pegrid
34	USE profil_parameter
35	USE statistics
36
37	IMPLICIT NONE
38
39	CHARACTER (LEN=2) :: suffix
40	CHARACTER (LEN=20) :: return_addres, return_usern, xtext = 'time in s'
41	CHARACTER (LEN=30) :: filename
42	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
43	avs_data_file_localname
44	CHARACTER (LEN=80) :: rtext
45	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
46	batch_scp, zeile
47	CHARACTER (LEN=400) :: command
48
49	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
50	j, k, legpos = 1, timodex = 1
51	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
52
53	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
54	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
55	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
56
57	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
58	sizex = 250.0, sizey = 40.0, texfac = 1.5
59
60	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
61	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
62
63
64	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
65	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
66	rand, rlegfak, sizex, sizey, texfac, &
67	timodex, twoxa, twoya, xtext
68
69
70	!
71	!-- Immediate return if file already open
72	IF ( openfile(file_id)%opened ) RETURN
73
74	!
75	!-- Only certain files are allowed to be re-opened
76	!-- NOTE: some of the other files perhaps also could be re-opened, but it
77	!-- has not been checked so far, if it works!
78	IF ( openfile(file_id)%opened_before ) THEN
79	SELECT CASE ( file_id )
80	CASE ( 14, 21, 22, 23, 80:85 )
81	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
82	IF ( myid == 0 ) PRINT*, '+++ check_open: re-open of unit ', &
83	' 14 is not verified. Please check results!'
84	ENDIF
85	CONTINUE
86	CASE DEFAULT
87	IF ( myid == 0 ) THEN
88	PRINT*, '+++ check_open: re-opening of file-id ', file_id, &
89	' is not allowed'
90	ENDIF
91	RETURN
92	END SELECT
93	ENDIF
94
95	!
96	!-- Check if file may be opened on the relevant PE
97	SELECT CASE ( file_id )
98
99	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 101:107, 109, 111:113, &
100	116 )
101
102	IF ( myid /= 0 ) THEN
103	PRINT*,'+++ check_open: opening file-id ',file_id, &
104	' not allowed for PE ',myid
105	#if defined( __parallel )
106	CALL MPI_ABORT( comm2d, 9999, ierr )
107	#else
108	CALL local_stop
109	#endif
110	ENDIF
111
112	CASE ( 21, 22, 23 )
113
114	IF ( .NOT. data_output_2d_on_each_pe ) THEN
115	IF ( myid /= 0 ) THEN
116	PRINT*,'+++ check_open: opening file-id ',file_id, &
117	' not allowed for PE ',myid
118	#if defined( __parallel )
119	CALL MPI_ABORT( comm2d, 9999, ierr )
120	#else
121	CALL local_stop
122	#endif
123	ENDIF
124	ENDIF
125
126	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
127
128	!
129	!-- File-ids that are used temporarily in other routines
130	PRINT*,'+++ check_open: opening file-id ',file_id, &
131	' is not allowed since it is used otherwise'
132
133	END SELECT
134
135	!
136	!-- Open relevant files
137	SELECT CASE ( file_id )
138
139	CASE ( 11 )
140
141	OPEN ( 11, FILE='PARIN', FORM='FORMATTED', STATUS='OLD' )
142
143	CASE ( 13 )
144
145	IF ( myid_char == '' ) THEN
146	OPEN ( 13, FILE='BININ'//myid_char, FORM='UNFORMATTED', &
147	STATUS='OLD' )
148	ELSE
149	#if defined( __t3eh ) \|\| defined( __t3eb ) \|\| defined( __t3ej5 )
150	!
151	!-- Declare a cache layer for faster I/O
152	CALL ASNUNIT ( 13, '-F cachea:512:1:1', ierr1 )
153	#endif
154	OPEN ( 13, FILE='BININ/'//myid_char, FORM='UNFORMATTED', &
155	STATUS='OLD' )
156	ENDIF
157
158	CASE ( 14 )
159
160	IF ( myid_char == '' ) THEN
161	OPEN ( 14, FILE='BINOUT'//myid_char, FORM='UNFORMATTED', &
162	POSITION='APPEND' )
163	ELSE
164	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
165	CALL local_system( 'mkdir BINOUT' )
166	ENDIF
167	#if defined( __parallel )
168	!
169	!-- Set a barrier in order to allow that all other processors in the
170	!-- directory created by PE0 can open their file
171	CALL MPI_BARRIER( comm2d, ierr )
172	#endif
173	#if defined( __t3eh ) \|\| defined( __t3eb ) \|\| defined( __t3ej5 )
174	!
175	!-- Declare a cache layer for faster I/O
176	CALL ASNUNIT ( 14, '-F cachea:512:1:1', ierr1 )
177	#endif
178	OPEN ( 14, FILE='BINOUT/'//myid_char_14, FORM='UNFORMATTED', &
179	POSITION='APPEND' )
180	ENDIF
181
182	CASE ( 15 )
183
184	OPEN ( 15, FILE='RUN_CONTROL', FORM='FORMATTED' )
185
186	CASE ( 16 )
187
188	OPEN ( 16, FILE='LIST_PROFIL', FORM='FORMATTED' )
189
190	CASE ( 17 )
191
192	OPEN ( 17, FILE='LIST_PROFIL_1D', FORM='FORMATTED' )
193
194	CASE ( 18 )
195
196	OPEN ( 18, FILE='CPU_MEASURES', FORM='FORMATTED' )
197
198	CASE ( 19 )
199
200	OPEN ( 19, FILE='HEADER', FORM='FORMATTED' )
201
202	CASE ( 20 )
203
204	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
205	CALL local_system( 'mkdir DATA_LOG' )
206	ENDIF
207	IF ( myid_char == '' ) THEN
208	OPEN ( 20, FILE='DATA_LOG/_0000', FORM='UNFORMATTED', &
209	POSITION='APPEND' )
210	ELSE
211	#if defined( __parallel )
212	!
213	!-- Set a barrier in order to allow that all other processors in the
214	!-- directory created by PE0 can open their file
215	CALL MPI_BARRIER( comm2d, ierr )
216	#endif
217	OPEN ( 20, FILE='DATA_LOG/'//myid_char, FORM='UNFORMATTED', &
218	POSITION='APPEND' )
219	ENDIF
220
221	CASE ( 21 )
222
223	IF ( data_output_2d_on_each_pe ) THEN
224	OPEN ( 21, FILE='PLOT2D_XY'//myid_char, FORM='UNFORMATTED', &
225	POSITION='APPEND' )
226	ELSE
227	OPEN ( 21, FILE='PLOT2D_XY', FORM='UNFORMATTED', &
228	POSITION='APPEND' )
229	ENDIF
230
231	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
232	!
233	!-- Output for combine_plot_fields
234	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
235	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
236	WRITE (21) 0, nx+1, 0, ny+1 ! output part
237	ENDIF
238	!
239	!-- Determine and write ISO2D coordiante header
240	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
241	hu = 0.0
242	ho = (ny+1) * dy
243	DO i = 1, ny
244	eta(i) = REAL( i ) / ( ny + 1.0 )
245	ENDDO
246	eta(0) = 0.0
247	eta(ny+1) = 1.0
248
249	WRITE (21) dx,eta,hu,ho
250	DEALLOCATE( eta, ho, hu )
251
252	!
253	!-- Create output file for local parameters
254	IF ( iso2d_output ) THEN
255	OPEN ( 27, FILE='PLOT2D_XY_LOCAL', FORM='FORMATTED', &
256	DELIM='APOSTROPHE' )
257	openfile(27)%opened = .TRUE.
258	ENDIF
259
260	ENDIF
261
262	CASE ( 22 )
263
264	IF ( data_output_2d_on_each_pe ) THEN
265	OPEN ( 22, FILE='PLOT2D_XZ'//myid_char, FORM='UNFORMATTED', &
266	POSITION='APPEND' )
267	ELSE
268	OPEN ( 22, FILE='PLOT2D_XZ', FORM='UNFORMATTED', &
269	POSITION='APPEND' )
270	ENDIF
271
272	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
273	!
274	!-- Output for combine_plot_fields
275	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
276	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
277	WRITE (22) 0, nx+1, 0, nz+1 ! output part
278	ENDIF
279	!
280	!-- Determine and write ISO2D coordiante header
281	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
282	hu = 0.0
283	ho = zu(nz+1)
284	DO i = 1, nz
285	eta(i) = REAL( zu(i) ) / zu(nz+1)
286	ENDDO
287	eta(0) = 0.0
288	eta(nz+1) = 1.0
289
290	WRITE (22) dx,eta,hu,ho
291	DEALLOCATE( eta, ho, hu )
292	!
293	!-- Create output file for local parameters
294	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL', FORM='FORMATTED', &
295	DELIM='APOSTROPHE' )
296	openfile(28)%opened = .TRUE.
297
298	ENDIF
299
300	CASE ( 23 )
301
302	IF ( data_output_2d_on_each_pe ) THEN
303	OPEN ( 23, FILE='PLOT2D_YZ'//myid_char, FORM='UNFORMATTED', &
304	POSITION='APPEND' )
305	ELSE
306	OPEN ( 23, FILE='PLOT2D_YZ', FORM='UNFORMATTED', &
307	POSITION='APPEND' )
308	ENDIF
309
310	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
311	!
312	!-- Output for combine_plot_fields
313	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
314	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
315	WRITE (23) 0, ny+1, 0, nz+1 ! output part
316	ENDIF
317	!
318	!-- Determine and write ISO2D coordiante header
319	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
320	hu = 0.0
321	ho = zu(nz+1)
322	DO i = 1, nz
323	eta(i) = REAL( zu(i) ) / zu(nz+1)
324	ENDDO
325	eta(0) = 0.0
326	eta(nz+1) = 1.0
327
328	WRITE (23) dx,eta,hu,ho
329	DEALLOCATE( eta, ho, hu )
330	!
331	!-- Create output file for local parameters
332	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL', FORM='FORMATTED', &
333	DELIM='APOSTROPHE' )
334	openfile(29)%opened = .TRUE.
335
336	ENDIF
337
338	CASE ( 30 )
339
340
341	#if defined( __t3eb ) \|\| defined( __t3eh ) \|\| defined( __t3ej5 )
342	!
343	!-- In case of active data compression 32Bit integer output
344	IF ( do3d_compress ) THEN
345	CALL ASNUNIT( 30, '-F f77 -N ieee_32', ierr1 )
346	ENDIF
347	#endif
348
349	OPEN ( 30, FILE='PLOT3D_DATA'//myid_char, FORM='UNFORMATTED' )
350	!
351	!-- Write coordinate file for AVS
352	IF ( myid == 0 ) THEN
353	#if defined( __parallel )
354	!
355	!-- Specifications for combine_plot_fields
356	IF ( .NOT. do3d_compress ) THEN
357	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
358	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
359	ENDIF
360	#endif
361	!
362	!-- Write coordinate file for AVS:
363	!-- First determine file names (including cyle numbers) of AVS files on
364	!-- target machine (to which the files are to be transferred).
365	!-- Therefore path information has to be obtained first.
366	IF ( avs_output ) THEN
367	CALL local_getenv( 'return_addres', 13, return_addres, iaddres )
368	CALL local_getenv( 'return_username', 15, return_usern, iusern )
369
370	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
371	DO WHILE ( .NOT. avs_coor_file_found .OR. &
372	.NOT. avs_data_file_found )
373
374	READ ( 3, '(A)', END=1 ) zeile
375
376	SELECT CASE ( zeile(1:11) )
377
378	CASE ( 'PLOT3D_COOR' )
379	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
380	avs_coor_file_localname
381	avs_coor_file_found = .TRUE.
382
383	CASE ( 'PLOT3D_DATA' )
384	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
385	avs_data_file_localname
386	avs_data_file_found = .TRUE.
387
388	CASE DEFAULT
389	READ ( 3, '(A/A)' ) zeile, zeile
390
391	END SELECT
392
393	ENDDO
394	!
395	!-- Now the cycle numbers on the remote machine must be obtained
396	!-- using batch_scp
397	1 CLOSE ( 3 )
398	IF ( .NOT. avs_coor_file_found .OR. &
399	.NOT. avs_data_file_found ) THEN
400	PRINT*, '+++ check_open: no filename for AVS-data-file ', &
401	'found in MRUN-config-file'
402	PRINT*, ' filename in FLD-file set to ', &
403	'"unknown"'
404
405	avs_coor_file = 'unknown'
406	avs_data_file = 'unknown'
407	ELSE
408	get_filenames = .TRUE.
409	IF ( TRIM( host ) == 'hpmuk' .OR. &
410	TRIM( host ) == 'lcmuk' ) THEN
411	batch_scp = '/home/raasch/pub/batch_scp'
412	ELSEIF ( TRIM( host ) == 'nech' ) THEN
413	batch_scp = '/ipf/b/b323011/pub/batch_scp'
414	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
415	TRIM( host ) == 'ibmb' ) THEN
416	batch_scp = '/home/h/niksiraa/pub/batch_scp'
417	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
418	batch_scp = '/home/nhbksira/pub/batch_scp'
419	ELSE
420	PRINT*,'+++ check_open: no path for batch_scp on host "',&
421	TRIM( host ), '"'
422	get_filenames = .FALSE.
423	ENDIF
424
425	IF ( get_filenames ) THEN
426	!
427	!-- Determine the coordinate file name.
428	!-- /etc/passwd serves as Dummy-Datei, because it is not
429	!-- really transferred.
430	command = TRIM( batch_scp ) // ' -n -u ' // &
431	return_usern(1:iusern) // ' ' // &
432	return_addres(1:iaddres) // ' /etc/passwd "' // &
433	TRIM( avs_coor_file_catalog ) // '" ' // &
434	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
435
436	CALL local_system( command )
437	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
438	READ ( 3, '(A)' ) avs_coor_file
439	CLOSE ( 3 )
440	!
441	!-- Determine the data file name
442	command = TRIM( batch_scp ) // ' -n -u ' // &
443	return_usern(1:iusern) // ' ' // &
444	return_addres(1:iaddres) // ' /etc/passwd "' // &
445	TRIM( avs_data_file_catalog ) // '" ' // &
446	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
447
448	CALL local_system( command )
449	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
450	READ ( 3, '(A)' ) avs_data_file
451	CLOSE ( 3 )
452
453	ELSE
454
455	avs_coor_file = 'unknown'
456	avs_data_file = 'unknown'
457
458	ENDIF
459
460	ENDIF
461
462	!
463	!-- Output of the coordinate file description for FLD-file
464	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
465	openfile(33)%opened = .TRUE.
466	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
467	TRIM( avs_coor_file ), (nx+2)*4, &
468	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
469
470
471	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
472	DO i = 0, nx+1
473	xkoor(i) = i * dx
474	ENDDO
475	DO j = 0, ny+1
476	ykoor(j) = j * dy
477	ENDDO
478	DO k = 0, nz_do3d
479	zkoor(k) = zu(k)
480	ENDDO
481
482	!
483	!-- Create and write on AVS coordinate file
484	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
485	openfile(31)%opened = .TRUE.
486
487	WRITE (31) xkoor, ykoor, zkoor
488	DEALLOCATE( xkoor, ykoor, zkoor )
489
490	!
491	!-- Create FLD file (being written on in close_file)
492	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
493	openfile(32)%opened = .TRUE.
494
495	!
496	!-- Create flag file for compressed 3D output,
497	!-- influences output commands in mrun
498	IF ( do3d_compress ) THEN
499	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
500	WRITE ( 3, '(1X)' )
501	CLOSE ( 3 )
502	ENDIF
503
504	ENDIF
505
506	ENDIF
507
508	!
509	!-- In case of data compression output of the coordinates of the
510	!-- corresponding partial array of a PE only once at the top of the file
511	IF ( avs_output .AND. do3d_compress ) THEN
512	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
513	ENDIF
514
515	CASE ( 40:49 )
516
517	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
518	suffix = ''
519	ELSE
520	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
521	ENDIF
522	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( suffix ), FORM='FORMATTED' )
523	!
524	!-- Write contents comments at the top of the file
525	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
526	TRIM( region( file_id - 40 ) )
527
528	CASE ( 50:59 )
529
530	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
531	suffix = ''
532	ELSE
533	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
534	ENDIF
535	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( suffix ), FORM='FORMATTED',&
536	RECL=496 )
537	!
538	!-- Write PROFIL parameter file for output of time series
539	!-- NOTE: To be on the safe side, this output is done at the beginning of
540	!-- the model run (in case of collapse) and it is repeated in
541	!-- close_file, then, however, with value ranges for the coordinate
542	!-- systems
543	!
544	!-- Firstly determine the number of the coordinate systems to be drawn
545	cranz = 0
546	DO j = 1, 10
547	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
548	ENDDO
549	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
550	TRIM( region( file_id - 50 ) )
551	!
552	!-- Write RAHMEN parameter
553	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( suffix ), FORM='FORMATTED', &
554	DELIM='APOSTROPHE' )
555	WRITE ( 90, RAHMEN )
556	!
557	!-- Determine and write CROSS parameters for the individual coordinate
558	!-- systems
559	DO j = 1, 10
560	k = cross_ts_number_count(j)
561	IF ( k /= 0 ) THEN
562	!
563	!-- Store curve numbers, colours and line style
564	klist(1:k) = cross_ts_numbers(1:k,j)
565	klist(k+1:10) = 999999
566	cucol(1:k) = linecolors(1:k)
567	lstyle(1:k) = linestyles(1:k)
568	!
569	!-- Write CROSS parameter
570	WRITE ( 90, CROSS )
571
572	ENDIF
573	ENDDO
574
575	CLOSE ( 90 )
576	!
577	!-- Write all labels at the top of the data file, but only during the
578	!-- first run of a sequence of jobs. The following jobs copy the time
579	!-- series data to the bottom of that file.
580	IF ( runnr == 0 ) THEN
581	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
582	' ' // TRIM( region( file_id - 50 ) )
583	ENDIF
584
585
586	CASE ( 80 )
587
588	IF ( myid_char == '' ) THEN
589	OPEN ( 80, FILE='PARTICLE_INFOS'//myid_char, FORM='FORMATTED', &
590	POSITION='APPEND' )
591	ELSE
592	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
593	CALL local_system( 'mkdir PARTICLE_INFOS' )
594	ENDIF
595	#if defined( __parallel )
596	!
597	!-- Set a barrier in order to allow that thereafter all other
598	!-- processors in the directory created by PE0 can open their file.
599	!-- WARNING: The following barrier will lead to hanging jobs, if
600	!-- check_open is first called from routine
601	!-- allocate_prt_memory!
602	IF ( .NOT. openfile(80)%opened_before ) THEN
603	CALL MPI_BARRIER( comm2d, ierr )
604	ENDIF
605	#endif
606	OPEN ( 80, FILE='PARTICLE_INFOS/'//myid_char, FORM='FORMATTED', &
607	POSITION='APPEND' )
608	ENDIF
609
610	IF ( .NOT. openfile(80)%opened_before ) THEN
611	WRITE ( 80, 8000 ) TRIM( run_description_header )
612	ENDIF
613
614	CASE ( 81 )
615
616	OPEN ( 81, FILE='PLOTSP_X_PAR', FORM='FORMATTED', &
617	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
618
619	CASE ( 82 )
620
621	OPEN ( 82, FILE='PLOTSP_X_DATA', FORM='FORMATTED', &
622	POSITION = 'APPEND' )
623
624	CASE ( 83 )
625
626	OPEN ( 83, FILE='PLOTSP_Y_PAR', FORM='FORMATTED', &
627	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
628
629	CASE ( 84 )
630
631	OPEN ( 84, FILE='PLOTSP_Y_DATA', FORM='FORMATTED', &
632	POSITION='APPEND' )
633
634	CASE ( 85 )
635
636	IF ( myid_char == '' ) THEN
637	OPEN ( 85, FILE='PARTICLE_DATA'//myid_char, FORM='UNFORMATTED', &
638	POSITION='APPEND' )
639	ELSE
640	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
641	CALL local_system( 'mkdir PARTICLE_DATA' )
642	ENDIF
643	#if defined( __parallel )
644	!
645	!-- Set a barrier in order to allow that thereafter all other
646	!-- processors in the directory created by PE0 can open their file
647	CALL MPI_BARRIER( comm2d, ierr )
648	#endif
649	OPEN ( 85, FILE='PARTICLE_DATA/'//myid_char, FORM='UNFORMATTED', &
650	POSITION='APPEND' )
651	ENDIF
652
653	IF ( .NOT. openfile(85)%opened_before ) THEN
654	WRITE ( 85 ) run_description_header
655	!
656	!-- Attention: change version number whenever the output format on
657	!-- unit 85 is changed (see also in routine advec_particles)
658	rtext = 'data format version 3.0'
659	WRITE ( 85 ) rtext
660	WRITE ( 85 ) number_of_particle_groups, &
661	max_number_of_particle_groups
662	WRITE ( 85 ) particle_groups
663	ENDIF
664
665	#if defined( __netcdf )
666	CASE ( 101, 111 )
667	!
668	!-- Set filename depending on unit number
669	IF ( file_id == 101 ) THEN
670	filename = 'DATA_2D_XY_NETCDF'
671	av = 0
672	ELSE
673	filename = 'DATA_2D_XY_AV_NETCDF'
674	av = 1
675	ENDIF
676	!
677	!-- Inquire, if there is a NetCDF file from a previuos run. This should
678	!-- be opened for extension, if its dimensions and variables match the
679	!-- actual run.
680	INQUIRE( FILE=filename, EXIST=netcdf_extend )
681
682	IF ( netcdf_extend ) THEN
683	!
684	!-- Open an existing NetCDF file for output
685	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
686	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 20 )
687	!
688	!-- Read header information and set all ids. If there is a mismatch
689	!-- between the previuos and the actual run, netcdf_extend is returned
690	!-- as .FALSE.
691	CALL define_netcdf_header( 'xy', netcdf_extend, av )
692
693	!
694	!-- Remove the local file, if it can not be extended
695	IF ( .NOT. netcdf_extend ) THEN
696	nc_stat = NF90_CLOSE( id_set_xy(av) )
697	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 21 )
698	CALL local_system( 'rm ' // TRIM( filename ) )
699	ENDIF
700
701	ENDIF
702
703	IF ( .NOT. netcdf_extend ) THEN
704	!
705	!-- Create a new NetCDF output file
706	IF ( netcdf_64bit ) THEN
707	#if defined( __netcdf_64bit )
708	nc_stat = NF90_CREATE( filename, &
709	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
710	id_set_xy(av) )
711	#else
712	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
713	'offset allowed on this machine'
714	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
715	#endif
716	ELSE
717	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
718	ENDIF
719	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 22 )
720	!
721	!-- Define the header
722	CALL define_netcdf_header( 'xy', netcdf_extend, av )
723
724	ENDIF
725
726	CASE ( 102, 112 )
727	!
728	!-- Set filename depending on unit number
729	IF ( file_id == 102 ) THEN
730	filename = 'DATA_2D_XZ_NETCDF'
731	av = 0
732	ELSE
733	filename = 'DATA_2D_XZ_AV_NETCDF'
734	av = 1
735	ENDIF
736	!
737	!-- Inquire, if there is a NetCDF file from a previuos run. This should
738	!-- be opened for extension, if its dimensions and variables match the
739	!-- actual run.
740	INQUIRE( FILE=filename, EXIST=netcdf_extend )
741
742	IF ( netcdf_extend ) THEN
743	!
744	!-- Open an existing NetCDF file for output
745	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
746	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 23 )
747	!
748	!-- Read header information and set all ids. If there is a mismatch
749	!-- between the previuos and the actual run, netcdf_extend is returned
750	!-- as .FALSE.
751	CALL define_netcdf_header( 'xz', netcdf_extend, av )
752
753	!
754	!-- Remove the local file, if it can not be extended
755	IF ( .NOT. netcdf_extend ) THEN
756	nc_stat = NF90_CLOSE( id_set_xz(av) )
757	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 24 )
758	CALL local_system( 'rm ' // TRIM( filename ) )
759	ENDIF
760
761	ENDIF
762
763	IF ( .NOT. netcdf_extend ) THEN
764	!
765	!-- Create a new NetCDF output file
766	IF ( netcdf_64bit ) THEN
767	#if defined( __netcdf_64bit )
768	nc_stat = NF90_CREATE( filename, &
769	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
770	id_set_xz(av) )
771	#else
772	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
773	'offset allowed on this machine'
774	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
775	#endif
776	ELSE
777	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
778	ENDIF
779	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 25 )
780	!
781	!-- Define the header
782	CALL define_netcdf_header( 'xz', netcdf_extend, av )
783
784	ENDIF
785
786	CASE ( 103, 113 )
787	!
788	!-- Set filename depending on unit number
789	IF ( file_id == 103 ) THEN
790	filename = 'DATA_2D_YZ_NETCDF'
791	av = 0
792	ELSE
793	filename = 'DATA_2D_YZ_AV_NETCDF'
794	av = 1
795	ENDIF
796	!
797	!-- Inquire, if there is a NetCDF file from a previuos run. This should
798	!-- be opened for extension, if its dimensions and variables match the
799	!-- actual run.
800	INQUIRE( FILE=filename, EXIST=netcdf_extend )
801
802	IF ( netcdf_extend ) THEN
803	!
804	!-- Open an existing NetCDF file for output
805	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
806	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 26 )
807	!
808	!-- Read header information and set all ids. If there is a mismatch
809	!-- between the previuos and the actual run, netcdf_extend is returned
810	!-- as .FALSE.
811	CALL define_netcdf_header( 'yz', netcdf_extend, av )
812
813	!
814	!-- Remove the local file, if it can not be extended
815	IF ( .NOT. netcdf_extend ) THEN
816	nc_stat = NF90_CLOSE( id_set_yz(av) )
817	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 27 )
818	CALL local_system( 'rm ' // TRIM( filename ) )
819	ENDIF
820
821	ENDIF
822
823	IF ( .NOT. netcdf_extend ) THEN
824	!
825	!-- Create a new NetCDF output file
826	IF ( netcdf_64bit ) THEN
827	#if defined( __netcdf_64bit )
828	nc_stat = NF90_CREATE( filename, &
829	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET), &
830	id_set_yz(av) )
831	#else
832	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
833	'offset allowed on this machine'
834	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
835	#endif
836	ELSE
837	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
838	ENDIF
839	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 28 )
840	!
841	!-- Define the header
842	CALL define_netcdf_header( 'yz', netcdf_extend, av )
843
844	ENDIF
845
846	CASE ( 104 )
847	!
848	!-- Inquire, if there is a NetCDF file from a previuos run. This should
849	!-- be opened for extension, if its variables match the actual run.
850	INQUIRE( FILE='DATA_1D_PR_NETCDF', EXIST=netcdf_extend )
851
852	IF ( netcdf_extend ) THEN
853	!
854	!-- Open an existing NetCDF file for output
855	nc_stat = NF90_OPEN( 'DATA_1D_PR_NETCDF', NF90_WRITE, id_set_pr )
856	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 29 )
857	!
858	!-- Read header information and set all ids. If there is a mismatch
859	!-- between the previuos and the actual run, netcdf_extend is returned
860	!-- as .FALSE.
861	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
862
863	!
864	!-- Remove the local file, if it can not be extended
865	IF ( .NOT. netcdf_extend ) THEN
866	nc_stat = NF90_CLOSE( id_set_pr )
867	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 30 )
868	CALL local_system( 'rm DATA_1D_PR_NETCDF' )
869	ENDIF
870
871	ENDIF
872
873	IF ( .NOT. netcdf_extend ) THEN
874	!
875	!-- Create a new NetCDF output file
876	IF ( netcdf_64bit ) THEN
877	#if defined( __netcdf_64bit )
878	nc_stat = NF90_CREATE( 'DATA_1D_PR_NETCDF', &
879	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
880	id_set_pr )
881	#else
882	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
883	'offset allowed on this machine'
884	nc_stat = NF90_CREATE( 'DATA_1D_PR_NETCDF', NF90_NOCLOBBER, &
885	id_set_pr )
886	#endif
887	ELSE
888	nc_stat = NF90_CREATE( 'DATA_1D_PR_NETCDF', NF90_NOCLOBBER, &
889	id_set_pr )
890	ENDIF
891	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 31 )
892	!
893	!-- Define the header
894	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
895
896	ENDIF
897
898	CASE ( 105 )
899	!
900	!-- Inquire, if there is a NetCDF file from a previuos run. This should
901	!-- be opened for extension, if its variables match the actual run.
902	INQUIRE( FILE='DATA_1D_TS_NETCDF', EXIST=netcdf_extend )
903
904	IF ( netcdf_extend ) THEN
905	!
906	!-- Open an existing NetCDF file for output
907	nc_stat = NF90_OPEN( 'DATA_1D_TS_NETCDF', NF90_WRITE, id_set_ts )
908	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 32 )
909	!
910	!-- Read header information and set all ids. If there is a mismatch
911	!-- between the previuos and the actual run, netcdf_extend is returned
912	!-- as .FALSE.
913	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
914
915	!
916	!-- Remove the local file, if it can not be extended
917	IF ( .NOT. netcdf_extend ) THEN
918	nc_stat = NF90_CLOSE( id_set_ts )
919	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 33 )
920	CALL local_system( 'rm DATA_1D_TS_NETCDF' )
921	ENDIF
922
923	ENDIF
924
925	IF ( .NOT. netcdf_extend ) THEN
926	!
927	!-- Create a new NetCDF output file
928	IF ( netcdf_64bit ) THEN
929	#if defined( __netcdf_64bit )
930	nc_stat = NF90_CREATE( 'DATA_1D_TS_NETCDF', &
931	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
932	id_set_ts )
933	#else
934	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
935	'offset allowed on this machine'
936	nc_stat = NF90_CREATE( 'DATA_1D_TS_NETCDF', NF90_NOCLOBBER, &
937	id_set_ts )
938	#endif
939	ELSE
940	nc_stat = NF90_CREATE( 'DATA_1D_TS_NETCDF', NF90_NOCLOBBER, &
941	id_set_ts )
942	ENDIF
943	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 34 )
944	!
945	!-- Define the header
946	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
947
948	ENDIF
949
950
951	CASE ( 106, 116 )
952	!
953	!-- Set filename depending on unit number
954	IF ( file_id == 106 ) THEN
955	filename = 'DATA_3D_NETCDF'
956	av = 0
957	ELSE
958	filename = 'DATA_3D_AV_NETCDF'
959	av = 1
960	ENDIF
961	!
962	!-- Inquire, if there is a NetCDF file from a previuos run. This should
963	!-- be opened for extension, if its dimensions and variables match the
964	!-- actual run.
965	INQUIRE( FILE=filename, EXIST=netcdf_extend )
966
967	IF ( netcdf_extend ) THEN
968	!
969	!-- Open an existing NetCDF file for output
970	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
971	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 35 )
972	!
973	!-- Read header information and set all ids. If there is a mismatch
974	!-- between the previuos and the actual run, netcdf_extend is returned
975	!-- as .FALSE.
976	CALL define_netcdf_header( '3d', netcdf_extend, av )
977
978	!
979	!-- Remove the local file, if it can not be extended
980	IF ( .NOT. netcdf_extend ) THEN
981	nc_stat = NF90_CLOSE( id_set_3d(av) )
982	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 36 )
983	CALL local_system('rm ' // TRIM( filename ) )
984	ENDIF
985
986	ENDIF
987
988	IF ( .NOT. netcdf_extend ) THEN
989	!
990	!-- Create a new NetCDF output file
991	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
992	#if defined( __netcdf_64bit )
993	nc_stat = NF90_CREATE( filename, &
994	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
995	id_set_3d(av) )
996	#else
997	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
998	'offset allowed on this machine'
999	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1000	#endif
1001	ELSE
1002	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1003	ENDIF
1004	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 37 )
1005	!
1006	!-- Define the header
1007	CALL define_netcdf_header( '3d', netcdf_extend, av )
1008
1009	ENDIF
1010
1011
1012	CASE ( 107 )
1013	!
1014	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1015	!-- be opened for extension, if its variables match the actual run.
1016	INQUIRE( FILE='DATA_1D_SP_NETCDF', EXIST=netcdf_extend )
1017
1018	IF ( netcdf_extend ) THEN
1019	!
1020	!-- Open an existing NetCDF file for output
1021	nc_stat = NF90_OPEN( 'DATA_1D_SP_NETCDF', NF90_WRITE, id_set_sp )
1022	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 38 )
1023	!
1024	!-- Read header information and set all ids. If there is a mismatch
1025	!-- between the previuos and the actual run, netcdf_extend is returned
1026	!-- as .FALSE.
1027	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1028
1029	!
1030	!-- Remove the local file, if it can not be extended
1031	IF ( .NOT. netcdf_extend ) THEN
1032	nc_stat = NF90_CLOSE( id_set_sp )
1033	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 39 )
1034	CALL local_system( 'rm DATA_1D_SP_NETCDF' )
1035	ENDIF
1036
1037	ENDIF
1038
1039	IF ( .NOT. netcdf_extend ) THEN
1040	!
1041	!-- Create a new NetCDF output file
1042	IF ( netcdf_64bit ) THEN
1043	#if defined( __netcdf_64bit )
1044	nc_stat = NF90_CREATE( 'DATA_1D_SP_NETCDF', &
1045	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1046	id_set_sp )
1047	#else
1048	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
1049	'offset allowed on this machine'
1050	nc_stat = NF90_CREATE( 'DATA_1D_SP_NETCDF', NF90_NOCLOBBER, &
1051	id_set_sp )
1052	#endif
1053	ELSE
1054	nc_stat = NF90_CREATE( 'DATA_1D_SP_NETCDF', NF90_NOCLOBBER, &
1055	id_set_sp )
1056	ENDIF
1057	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 40 )
1058	!
1059	!-- Define the header
1060	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1061
1062	ENDIF
1063
1064
1065	CASE ( 108 )
1066
1067	IF ( myid_char == '' ) THEN
1068	filename = 'DATA_PRT_NETCDF'
1069	ELSE
1070	filename = 'DATA_PRT_NETCDF/' // myid_char
1071	ENDIF
1072	!
1073	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1074	!-- be opened for extension, if its variables match the actual run.
1075	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1076
1077	IF ( netcdf_extend ) THEN
1078	!
1079	!-- Open an existing NetCDF file for output
1080	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1081	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 41 )
1082	!
1083	!-- Read header information and set all ids. If there is a mismatch
1084	!-- between the previuos and the actual run, netcdf_extend is returned
1085	!-- as .FALSE.
1086	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1087
1088	!
1089	!-- Remove the local file, if it can not be extended
1090	IF ( .NOT. netcdf_extend ) THEN
1091	nc_stat = NF90_CLOSE( id_set_prt )
1092	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 42 )
1093	CALL local_system( 'rm ' // filename )
1094	ENDIF
1095
1096	ENDIF
1097
1098	IF ( .NOT. netcdf_extend ) THEN
1099
1100	!
1101	!-- For runs on multiple processors create the subdirectory
1102	IF ( myid_char /= '' ) THEN
1103	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1104	THEN ! needs modification in case of non-extendable sets
1105	CALL local_system( 'mkdir DATA_PRT_NETCDF/' )
1106	ENDIF
1107	#if defined( __parallel )
1108	!
1109	!-- Set a barrier in order to allow that all other processors in the
1110	!-- directory created by PE0 can open their file
1111	CALL MPI_BARRIER( comm2d, ierr )
1112	#endif
1113	ENDIF
1114
1115	!
1116	!-- Create a new NetCDF output file
1117	IF ( netcdf_64bit ) THEN
1118	#if defined( __netcdf_64bit )
1119	nc_stat = NF90_CREATE( filename, &
1120	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1121	id_set_prt )
1122	#else
1123	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
1124	'offset allowed on this machine'
1125	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1126	#endif
1127	ELSE
1128	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1129	ENDIF
1130	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 43 )
1131
1132	!
1133	!-- Define the header
1134	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1135
1136	ENDIF
1137
1138	CASE ( 109 )
1139	!
1140	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1141	!-- be opened for extension, if its variables match the actual run.
1142	INQUIRE( FILE='DATA_1D_PTS_NETCDF', EXIST=netcdf_extend )
1143
1144	IF ( netcdf_extend ) THEN
1145	!
1146	!-- Open an existing NetCDF file for output
1147	nc_stat = NF90_OPEN( 'DATA_1D_PTS_NETCDF', NF90_WRITE, id_set_pts )
1148	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 393 )
1149	!
1150	!-- Read header information and set all ids. If there is a mismatch
1151	!-- between the previuos and the actual run, netcdf_extend is returned
1152	!-- as .FALSE.
1153	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1154
1155	!
1156	!-- Remove the local file, if it can not be extended
1157	IF ( .NOT. netcdf_extend ) THEN
1158	nc_stat = NF90_CLOSE( id_set_pts )
1159	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 394 )
1160	CALL local_system( 'rm DATA_1D_PTS_NETCDF' )
1161	ENDIF
1162
1163	ENDIF
1164
1165	IF ( .NOT. netcdf_extend ) THEN
1166	!
1167	!-- Create a new NetCDF output file
1168	IF ( netcdf_64bit ) THEN
1169	#if defined( __netcdf_64bit )
1170	nc_stat = NF90_CREATE( 'DATA_1D_PTS_NETCDF', &
1171	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1172	id_set_pts )
1173	#else
1174	IF ( myid == 0 ) PRINT*, '+++ WARNING: NetCDF: no 64-bit ', &
1175	'offset allowed on this machine'
1176	nc_stat = NF90_CREATE( 'DATA_1D_PTS_NETCDF', NF90_NOCLOBBER, &
1177	id_set_pts )
1178	#endif
1179	ELSE
1180	nc_stat = NF90_CREATE( 'DATA_1D_PTS_NETCDF', NF90_NOCLOBBER, &
1181	id_set_pts )
1182	ENDIF
1183	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 395 )
1184	!
1185	!-- Define the header
1186	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1187
1188	ENDIF
1189	#else
1190
1191	CASE ( 101:109, 111:113, 116 )
1192
1193	!
1194	!-- Nothing is done in case of missing netcdf support
1195	RETURN
1196
1197	#endif
1198
1199	CASE DEFAULT
1200
1201	PRINT*,'+++ check_open: no OPEN-statement for file-id ',file_id
1202	#if defined( __parallel )
1203	CALL MPI_ABORT( comm2d, 9999, ierr )
1204	#else
1205	CALL local_stop
1206	#endif
1207
1208	END SELECT
1209
1210	!
1211	!-- Set open flag
1212	openfile(file_id)%opened = .TRUE.
1213
1214	!
1215	!-- Formats
1216	3300 FORMAT ('#'/ &
1217	'coord 1 file=',A,' filetype=unformatted'/ &
1218	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1219	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1220	'#')
1221	4000 FORMAT ('# ',A)
1222	5000 FORMAT ('# ',A/ &
1223	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1224	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1225	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1226	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1227	8000 FORMAT (A/ &
1228	' step time # of parts lPE sent/recv rPE sent/recv ',&
1229	'sPE sent/recv nPE sent/recv max # of parts'/ &
1230	103('-'))
1231
1232	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |