Home

Context Navigation

check_open.f90 @ 600

Last change on this file since 600 was 600, checked in by raasch, 14 years ago

New:
---

Changed:

Parameters moved from d3par to inipar: call_psolver_at_all_substeps,
cfl_factor, cycle_mg, mg_cycles,mg_switch_to_pe0_level, ngsrb, nsor,
omega_sor, prandtl_number, psolver, rayleigh_damping_factor,
rayleigh_damping_height, residual_limit (parin, read_var_list, write_var_list)

Due to this change, in routine skip_var_list (end of file read_var_list.f90),
variable ldum is replaced by cdum(LEN=1), because otherwise read errors (too
few data on file) would appear due to one of the additional parameters
(cycle_mg, which is a string of one single character) which are now stored
on the restart file.

Weblink to error message database changed to new trac server (message)

Errors:

Bugfix concerning check of cross-section levels on netcdf-files to be
extended (xz,yz) (netcdf)

Bugfix in opening of cross section netcdf-files (parallel opening with
netcdf4 only works for netcdf_data_format > 2) (check_open)

Default values of surface_scalarflux and surface_waterflux changed from 0.0
to 9999999.9. Giving the parameter the default values means, that the
respective surface fluxes are calculated by the MO-relations, so the old default
value did not allow to set the surface fluxes to zero explicitly.

Property svn:keywords set to Id

File size: 55.5 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! Bugfix in opening of cross section netcdf-files (parallel opening with
7	! netcdf4 only works for netcdf_data_format > 2)
8	!
9	! Former revisions:
10	! -----------------
11	! $Id: check_open.f90 600 2010-11-24 16:10:51Z raasch $
12	!
13	! 564 2010-09-30 13:18:59Z helmke
14	! start number of mask output files changed to 201, netcdf message identifiers
15	! of masked output changed
16	!
17	! 519 2010-03-19 05:30:02Z raasch
18	! NetCDF4 support for particle data
19	!
20	! 493 2010-03-01 08:30:24Z raasch
21	! NetCDF4 support (parallel output)
22	!
23	! 410 2009-12-04 17:05:40Z letzel
24	! masked data output
25	!
26	! 277 2009-03-31 09:13:47Z heinze
27	! Output of NetCDF messages with aid of message handling routine.
28	! Output of messages replaced by message handling routine
29	!
30	! 146 2008-01-17 13:08:34Z raasch
31	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
32	! because only this file contains the global variables,
33	! myid_char_14 removed
34	!
35	! 120 2007-10-17 11:54:43Z raasch
36	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
37	!
38	! 105 2007-08-08 07:12:55Z raasch
39	! Different filenames are used in case of a coupled simulation,
40	! coupling_char added to all relevant filenames
41	!
42	! 82 2007-04-16 15:40:52Z raasch
43	! Call of local_getenv removed, preprocessor directives for old systems removed
44	!
45	! 46 2007-03-05 06:00:47Z raasch
46	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
47	!
48	! RCS Log replace by Id keyword, revision history cleaned up
49	!
50	! Revision 1.44 2006/08/22 13:48:34 raasch
51	! xz and yz cross sections now up to nzt+1
52	!
53	! Revision 1.1 1997/08/11 06:10:55 raasch
54	! Initial revision
55	!
56	!
57	! Description:
58	! ------------
59	! Check if file unit is open. If not, open file and, if necessary, write a
60	! header or start other initializing actions, respectively.
61	!------------------------------------------------------------------------------!
62
63	USE array_kind
64	USE arrays_3d
65	USE control_parameters
66	USE grid_variables
67	USE indices
68	USE netcdf_control
69	USE particle_attributes
70	USE pegrid
71	USE profil_parameter
72	USE statistics
73
74	IMPLICIT NONE
75
76	CHARACTER (LEN=2) :: mask_char, suffix
77	CHARACTER (LEN=20) :: xtext = 'time in s'
78	CHARACTER (LEN=30) :: filename
79	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
80	avs_data_file_localname
81	CHARACTER (LEN=80) :: rtext
82	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
83	batch_scp, zeile
84	CHARACTER (LEN=400) :: command
85
86	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
87	j, k, legpos = 1, timodex = 1
88	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
89
90	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
91	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
92	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
93
94	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
95	sizex = 250.0, sizey = 40.0, texfac = 1.5
96
97	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
98	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
99
100
101	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
102	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
103	rand, rlegfak, sizex, sizey, texfac, &
104	timodex, twoxa, twoya, xtext
105
106
107	!
108	!-- Immediate return if file already open
109	IF ( openfile(file_id)%opened ) RETURN
110
111	!
112	!-- Only certain files are allowed to be re-opened
113	!-- NOTE: some of the other files perhaps also could be re-opened, but it
114	!-- has not been checked so far, if it works!
115	IF ( openfile(file_id)%opened_before ) THEN
116	SELECT CASE ( file_id )
117	CASE ( 13, 14, 21, 22, 23, 80:85 )
118	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
119	message_string = 're-open of unit ' // &
120	'14 is not verified. Please check results!'
121	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
122	ENDIF
123
124	CASE DEFAULT
125	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
126	' is not allowed'
127	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
128
129	RETURN
130
131	END SELECT
132	ENDIF
133
134	!
135	!-- Check if file may be opened on the relevant PE
136	SELECT CASE ( file_id )
137
138	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
139
140	IF ( myid /= 0 ) THEN
141	WRITE( message_string, * ) 'opening file-id ',file_id, &
142	' not allowed for PE ',myid
143	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
144	ENDIF
145
146	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
147
148	IF ( netcdf_data_format < 3 ) THEN
149
150	IF ( myid /= 0 ) THEN
151	WRITE( message_string, * ) 'opening file-id ',file_id, &
152	' not allowed for PE ',myid
153	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
154	ENDIF
155
156	ENDIF
157
158	CASE ( 21, 22, 23 )
159
160	IF ( .NOT. data_output_2d_on_each_pe ) THEN
161	IF ( myid /= 0 ) THEN
162	WRITE( message_string, * ) 'opening file-id ',file_id, &
163	' not allowed for PE ',myid
164	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
165	END IF
166	ENDIF
167
168	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
169
170	!
171	!-- File-ids that are used temporarily in other routines
172	WRITE( message_string, * ) 'opening file-id ',file_id, &
173	' is not allowed since it is used otherwise'
174	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
175
176	END SELECT
177
178	!
179	!-- Open relevant files
180	SELECT CASE ( file_id )
181
182	CASE ( 11 )
183
184	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
185	STATUS='OLD' )
186
187	CASE ( 13 )
188
189	IF ( myid_char == '' ) THEN
190	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
191	FORM='UNFORMATTED', STATUS='OLD' )
192	ELSE
193	!
194	!-- First opening of unit 13 openes file _0000 on all PEs because only
195	!-- this file contains the global variables
196	IF ( .NOT. openfile(file_id)%opened_before ) THEN
197	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
198	FORM='UNFORMATTED', STATUS='OLD' )
199	ELSE
200	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
201	FORM='UNFORMATTED', STATUS='OLD' )
202	ENDIF
203	ENDIF
204
205	CASE ( 14 )
206
207	IF ( myid_char == '' ) THEN
208	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
209	FORM='UNFORMATTED', POSITION='APPEND' )
210	ELSE
211	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
212	CALL local_system( 'mkdir BINOUT' // coupling_char )
213	ENDIF
214	#if defined( __parallel )
215	!
216	!-- Set a barrier in order to allow that all other processors in the
217	!-- directory created by PE0 can open their file
218	CALL MPI_BARRIER( comm2d, ierr )
219	#endif
220	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
221	FORM='UNFORMATTED', POSITION='APPEND' )
222	ENDIF
223
224	CASE ( 15 )
225
226	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
227
228	CASE ( 16 )
229
230	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
231
232	CASE ( 17 )
233
234	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
235
236	CASE ( 18 )
237
238	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
239
240	CASE ( 19 )
241
242	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
243
244	CASE ( 20 )
245
246	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
247	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
248	ENDIF
249	IF ( myid_char == '' ) THEN
250	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
251	FORM='UNFORMATTED', POSITION='APPEND' )
252	ELSE
253	#if defined( __parallel )
254	!
255	!-- Set a barrier in order to allow that all other processors in the
256	!-- directory created by PE0 can open their file
257	CALL MPI_BARRIER( comm2d, ierr )
258	#endif
259	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
260	FORM='UNFORMATTED', POSITION='APPEND' )
261	ENDIF
262
263	CASE ( 21 )
264
265	IF ( data_output_2d_on_each_pe ) THEN
266	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
267	FORM='UNFORMATTED', POSITION='APPEND' )
268	ELSE
269	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
270	FORM='UNFORMATTED', POSITION='APPEND' )
271	ENDIF
272
273	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
274	!
275	!-- Output for combine_plot_fields
276	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
277	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
278	WRITE (21) 0, nx+1, 0, ny+1 ! output part
279	ENDIF
280	!
281	!-- Determine and write ISO2D coordiante header
282	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
283	hu = 0.0
284	ho = (ny+1) * dy
285	DO i = 1, ny
286	eta(i) = REAL( i ) / ( ny + 1.0 )
287	ENDDO
288	eta(0) = 0.0
289	eta(ny+1) = 1.0
290
291	WRITE (21) dx,eta,hu,ho
292	DEALLOCATE( eta, ho, hu )
293
294	!
295	!-- Create output file for local parameters
296	IF ( iso2d_output ) THEN
297	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
298	FORM='FORMATTED', DELIM='APOSTROPHE' )
299	openfile(27)%opened = .TRUE.
300	ENDIF
301
302	ENDIF
303
304	CASE ( 22 )
305
306	IF ( data_output_2d_on_each_pe ) THEN
307	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
308	FORM='UNFORMATTED', POSITION='APPEND' )
309	ELSE
310	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
311	POSITION='APPEND' )
312	ENDIF
313
314	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
315	!
316	!-- Output for combine_plot_fields
317	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
318	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
319	WRITE (22) 0, nx+1, 0, nz+1 ! output part
320	ENDIF
321	!
322	!-- Determine and write ISO2D coordiante header
323	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
324	hu = 0.0
325	ho = zu(nz+1)
326	DO i = 1, nz
327	eta(i) = REAL( zu(i) ) / zu(nz+1)
328	ENDDO
329	eta(0) = 0.0
330	eta(nz+1) = 1.0
331
332	WRITE (22) dx,eta,hu,ho
333	DEALLOCATE( eta, ho, hu )
334	!
335	!-- Create output file for local parameters
336	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
337	FORM='FORMATTED', DELIM='APOSTROPHE' )
338	openfile(28)%opened = .TRUE.
339
340	ENDIF
341
342	CASE ( 23 )
343
344	IF ( data_output_2d_on_each_pe ) THEN
345	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
346	FORM='UNFORMATTED', POSITION='APPEND' )
347	ELSE
348	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
349	POSITION='APPEND' )
350	ENDIF
351
352	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
353	!
354	!-- Output for combine_plot_fields
355	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
356	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
357	WRITE (23) 0, ny+1, 0, nz+1 ! output part
358	ENDIF
359	!
360	!-- Determine and write ISO2D coordiante header
361	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
362	hu = 0.0
363	ho = zu(nz+1)
364	DO i = 1, nz
365	eta(i) = REAL( zu(i) ) / zu(nz+1)
366	ENDDO
367	eta(0) = 0.0
368	eta(nz+1) = 1.0
369
370	WRITE (23) dx,eta,hu,ho
371	DEALLOCATE( eta, ho, hu )
372	!
373	!-- Create output file for local parameters
374	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
375	FORM='FORMATTED', DELIM='APOSTROPHE' )
376	openfile(29)%opened = .TRUE.
377
378	ENDIF
379
380	CASE ( 30 )
381
382	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
383	FORM='UNFORMATTED' )
384	!
385	!-- Write coordinate file for AVS
386	IF ( myid == 0 ) THEN
387	#if defined( __parallel )
388	!
389	!-- Specifications for combine_plot_fields
390	IF ( .NOT. do3d_compress ) THEN
391	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
392	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
393	ENDIF
394	#endif
395	!
396	!-- Write coordinate file for AVS:
397	!-- First determine file names (including cyle numbers) of AVS files on
398	!-- target machine (to which the files are to be transferred).
399	!-- Therefore path information has to be obtained first.
400	IF ( avs_output ) THEN
401	iaddres = LEN_TRIM( return_addres )
402	iusern = LEN_TRIM( return_username )
403
404	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
405	DO WHILE ( .NOT. avs_coor_file_found .OR. &
406	.NOT. avs_data_file_found )
407
408	READ ( 3, '(A)', END=1 ) zeile
409
410	SELECT CASE ( zeile(1:11) )
411
412	CASE ( 'PLOT3D_COOR' )
413	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
414	avs_coor_file_localname
415	avs_coor_file_found = .TRUE.
416
417	CASE ( 'PLOT3D_DATA' )
418	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
419	avs_data_file_localname
420	avs_data_file_found = .TRUE.
421
422	CASE DEFAULT
423	READ ( 3, '(A/A)' ) zeile, zeile
424
425	END SELECT
426
427	ENDDO
428	!
429	!-- Now the cycle numbers on the remote machine must be obtained
430	!-- using batch_scp
431	1 CLOSE ( 3 )
432	IF ( .NOT. avs_coor_file_found .OR. &
433	.NOT. avs_data_file_found ) THEN
434	message_string= 'no filename for AVS-data-file ' // &
435	'found in MRUN-config-file' // &
436	' &filename in FLD-file set to "unknown"'
437	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
438
439	avs_coor_file = 'unknown'
440	avs_data_file = 'unknown'
441	ELSE
442	get_filenames = .TRUE.
443	IF ( TRIM( host ) == 'hpmuk' .OR. &
444	TRIM( host ) == 'lcmuk' ) THEN
445	batch_scp = '/home/raasch/pub/batch_scp'
446	ELSEIF ( TRIM( host ) == 'nech' ) THEN
447	batch_scp = '/ipf/b/b323011/pub/batch_scp'
448	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
449	TRIM( host ) == 'ibmb' ) THEN
450	batch_scp = '/home/h/niksiraa/pub/batch_scp'
451	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
452	batch_scp = '/home/nhbksira/pub/batch_scp'
453	ELSE
454	message_string= 'no path for batch_scp on host "' // &
455	TRIM( host ) // '"'
456	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
457	get_filenames = .FALSE.
458	ENDIF
459
460	IF ( get_filenames ) THEN
461	!
462	!-- Determine the coordinate file name.
463	!-- /etc/passwd serves as Dummy-Datei, because it is not
464	!-- really transferred.
465	command = TRIM( batch_scp ) // ' -n -u ' // &
466	return_username(1:iusern) // ' ' // &
467	return_addres(1:iaddres) // ' /etc/passwd "' // &
468	TRIM( avs_coor_file_catalog ) // '" ' // &
469	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
470
471	CALL local_system( command )
472	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
473	READ ( 3, '(A)' ) avs_coor_file
474	CLOSE ( 3 )
475	!
476	!-- Determine the data file name
477	command = TRIM( batch_scp ) // ' -n -u ' // &
478	return_username(1:iusern) // ' ' // &
479	return_addres(1:iaddres) // ' /etc/passwd "' // &
480	TRIM( avs_data_file_catalog ) // '" ' // &
481	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
482
483	CALL local_system( command )
484	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
485	READ ( 3, '(A)' ) avs_data_file
486	CLOSE ( 3 )
487
488	ELSE
489
490	avs_coor_file = 'unknown'
491	avs_data_file = 'unknown'
492
493	ENDIF
494
495	ENDIF
496
497	!
498	!-- Output of the coordinate file description for FLD-file
499	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
500	openfile(33)%opened = .TRUE.
501	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
502	TRIM( avs_coor_file ), (nx+2)*4, &
503	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
504
505
506	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
507	DO i = 0, nx+1
508	xkoor(i) = i * dx
509	ENDDO
510	DO j = 0, ny+1
511	ykoor(j) = j * dy
512	ENDDO
513	DO k = 0, nz_do3d
514	zkoor(k) = zu(k)
515	ENDDO
516
517	!
518	!-- Create and write on AVS coordinate file
519	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
520	openfile(31)%opened = .TRUE.
521
522	WRITE (31) xkoor, ykoor, zkoor
523	DEALLOCATE( xkoor, ykoor, zkoor )
524
525	!
526	!-- Create FLD file (being written on in close_file)
527	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
528	openfile(32)%opened = .TRUE.
529
530	!
531	!-- Create flag file for compressed 3D output,
532	!-- influences output commands in mrun
533	IF ( do3d_compress ) THEN
534	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
535	WRITE ( 3, '(1X)' )
536	CLOSE ( 3 )
537	ENDIF
538
539	ENDIF
540
541	ENDIF
542
543	!
544	!-- In case of data compression output of the coordinates of the
545	!-- corresponding partial array of a PE only once at the top of the file
546	IF ( avs_output .AND. do3d_compress ) THEN
547	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
548	ENDIF
549
550	CASE ( 40:49 )
551
552	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
553	suffix = ''
554	ELSE
555	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
556	ENDIF
557	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
558	TRIM( suffix ), &
559	FORM='FORMATTED' )
560	!
561	!-- Write contents comments at the top of the file
562	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
563	TRIM( region( file_id - 40 ) )
564
565	CASE ( 50:59 )
566
567	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
568	suffix = ''
569	ELSE
570	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
571	ENDIF
572	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
573	TRIM( suffix ), &
574	FORM='FORMATTED', RECL=496 )
575	!
576	!-- Write PROFIL parameter file for output of time series
577	!-- NOTE: To be on the safe side, this output is done at the beginning of
578	!-- the model run (in case of collapse) and it is repeated in
579	!-- close_file, then, however, with value ranges for the coordinate
580	!-- systems
581	!
582	!-- Firstly determine the number of the coordinate systems to be drawn
583	cranz = 0
584	DO j = 1, 10
585	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
586	ENDDO
587	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
588	TRIM( region( file_id - 50 ) )
589	!
590	!-- Write RAHMEN parameter
591	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
592	TRIM( suffix ), &
593	FORM='FORMATTED', DELIM='APOSTROPHE' )
594	WRITE ( 90, RAHMEN )
595	!
596	!-- Determine and write CROSS parameters for the individual coordinate
597	!-- systems
598	DO j = 1, 10
599	k = cross_ts_number_count(j)
600	IF ( k /= 0 ) THEN
601	!
602	!-- Store curve numbers, colours and line style
603	klist(1:k) = cross_ts_numbers(1:k,j)
604	klist(k+1:10) = 999999
605	cucol(1:k) = linecolors(1:k)
606	lstyle(1:k) = linestyles(1:k)
607	!
608	!-- Write CROSS parameter
609	WRITE ( 90, CROSS )
610
611	ENDIF
612	ENDDO
613
614	CLOSE ( 90 )
615	!
616	!-- Write all labels at the top of the data file, but only during the
617	!-- first run of a sequence of jobs. The following jobs copy the time
618	!-- series data to the bottom of that file.
619	IF ( runnr == 0 ) THEN
620	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
621	' ' // TRIM( region( file_id - 50 ) )
622	ENDIF
623
624
625	CASE ( 80 )
626
627	IF ( myid_char == '' ) THEN
628	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
629	FORM='FORMATTED', POSITION='APPEND' )
630	ELSE
631	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
632	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
633	ENDIF
634	#if defined( __parallel )
635	!
636	!-- Set a barrier in order to allow that thereafter all other
637	!-- processors in the directory created by PE0 can open their file.
638	!-- WARNING: The following barrier will lead to hanging jobs, if
639	!-- check_open is first called from routine
640	!-- allocate_prt_memory!
641	IF ( .NOT. openfile(80)%opened_before ) THEN
642	CALL MPI_BARRIER( comm2d, ierr )
643	ENDIF
644	#endif
645	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
646	myid_char, &
647	FORM='FORMATTED', POSITION='APPEND' )
648	ENDIF
649
650	IF ( .NOT. openfile(80)%opened_before ) THEN
651	WRITE ( 80, 8000 ) TRIM( run_description_header )
652	ENDIF
653
654	CASE ( 81 )
655
656	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
657	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
658
659	CASE ( 82 )
660
661	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
662	POSITION = 'APPEND' )
663
664	CASE ( 83 )
665
666	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
667	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
668
669	CASE ( 84 )
670
671	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
672	POSITION='APPEND' )
673
674	CASE ( 85 )
675
676	IF ( myid_char == '' ) THEN
677	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
678	FORM='UNFORMATTED', POSITION='APPEND' )
679	ELSE
680	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
681	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
682	ENDIF
683	#if defined( __parallel )
684	!
685	!-- Set a barrier in order to allow that thereafter all other
686	!-- processors in the directory created by PE0 can open their file
687	CALL MPI_BARRIER( comm2d, ierr )
688	#endif
689	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
690	myid_char, &
691	FORM='UNFORMATTED', POSITION='APPEND' )
692	ENDIF
693
694	IF ( .NOT. openfile(85)%opened_before ) THEN
695	WRITE ( 85 ) run_description_header
696	!
697	!-- Attention: change version number whenever the output format on
698	!-- unit 85 is changed (see also in routine advec_particles)
699	rtext = 'data format version 3.0'
700	WRITE ( 85 ) rtext
701	WRITE ( 85 ) number_of_particle_groups, &
702	max_number_of_particle_groups
703	WRITE ( 85 ) particle_groups
704	ENDIF
705
706	#if defined( __netcdf )
707	CASE ( 101, 111 )
708	!
709	!-- Set filename depending on unit number
710	IF ( file_id == 101 ) THEN
711	filename = 'DATA_2D_XY_NETCDF' // coupling_char
712	av = 0
713	ELSE
714	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
715	av = 1
716	ENDIF
717	!
718	!-- Inquire, if there is a NetCDF file from a previuos run. This should
719	!-- be opened for extension, if its dimensions and variables match the
720	!-- actual run.
721	INQUIRE( FILE=filename, EXIST=netcdf_extend )
722
723	IF ( netcdf_extend ) THEN
724	!
725	!-- Open an existing NetCDF file for output
726	IF ( netcdf_data_format < 3 ) THEN
727	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
728	ELSE
729	#if defined( __netcdf4 )
730	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
731	COMM = comm2d, INFO = MPI_INFO_NULL )
732	#endif
733	ENDIF
734
735	CALL handle_netcdf_error( 'check_open', 20 )
736	!
737	!-- Read header information and set all ids. If there is a mismatch
738	!-- between the previuos and the actual run, netcdf_extend is returned
739	!-- as .FALSE.
740	CALL define_netcdf_header( 'xy', netcdf_extend, av )
741
742	!
743	!-- Remove the local file, if it can not be extended
744	IF ( .NOT. netcdf_extend ) THEN
745	nc_stat = NF90_CLOSE( id_set_xy(av) )
746	CALL handle_netcdf_error( 'check_open', 21 )
747	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
748	ENDIF
749
750	ENDIF
751
752	IF ( .NOT. netcdf_extend ) THEN
753	!
754	!-- Create a new NetCDF output file with requested NetCDF format
755	IF ( netcdf_data_format == 1 ) THEN
756	!
757	!-- Classic NetCDF format
758	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
759
760	ELSEIF ( netcdf_data_format == 2 ) THEN
761	!
762	!-- 64bit-offset format
763	nc_stat = NF90_CREATE( filename, &
764	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
765	id_set_xy(av) )
766
767	#if defined( __netcdf4 )
768	ELSEIF ( netcdf_data_format == 3 ) THEN
769	!
770	!-- NetCDF4/HDF5 format
771	nc_stat = NF90_CREATE( filename, &
772	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
773	id_set_xy(av), COMM = comm2d, &
774	INFO = MPI_INFO_NULL )
775
776	ELSEIF ( netcdf_data_format == 4 ) THEN
777	!
778	!-- NetCDF4/HDF5 format with classic model flag
779	nc_stat = NF90_CREATE( filename, &
780	OR( NF90_NOCLOBBER, &
781	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
782	id_set_xy(av), COMM = comm2d, &
783	INFO = MPI_INFO_NULL )
784	#endif
785	ENDIF
786
787	CALL handle_netcdf_error( 'check_open', 22 )
788
789	!
790	!-- Define the header
791	CALL define_netcdf_header( 'xy', netcdf_extend, av )
792
793	!
794	!-- In case of parallel NetCDF output, create flag file which tells
795	!-- combine_plot_fields that nothing is to do.
796	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
797	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
798	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
799	CLOSE( 99 )
800	ENDIF
801
802	ENDIF
803
804	CASE ( 102, 112 )
805	!
806	!-- Set filename depending on unit number
807	IF ( file_id == 102 ) THEN
808	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
809	av = 0
810	ELSE
811	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
812	av = 1
813	ENDIF
814	!
815	!-- Inquire, if there is a NetCDF file from a previuos run. This should
816	!-- be opened for extension, if its dimensions and variables match the
817	!-- actual run.
818	INQUIRE( FILE=filename, EXIST=netcdf_extend )
819
820	IF ( netcdf_extend ) THEN
821	!
822	!-- Open an existing NetCDF file for output
823	IF ( netcdf_data_format < 3 ) THEN
824	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
825	ELSE
826	#if defined( __netcdf4 )
827	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
828	COMM = comm2d, INFO = MPI_INFO_NULL )
829	#endif
830	ENDIF
831
832	CALL handle_netcdf_error( 'check_open', 23 )
833	!
834	!-- Read header information and set all ids. If there is a mismatch
835	!-- between the previuos and the actual run, netcdf_extend is returned
836	!-- as .FALSE.
837	CALL define_netcdf_header( 'xz', netcdf_extend, av )
838
839	!
840	!-- Remove the local file, if it can not be extended
841	IF ( .NOT. netcdf_extend ) THEN
842	nc_stat = NF90_CLOSE( id_set_xz(av) )
843	CALL handle_netcdf_error( 'check_open', 24 )
844	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
845	ENDIF
846
847	ENDIF
848
849	IF ( .NOT. netcdf_extend ) THEN
850	!
851	!-- Create a new NetCDF output file with requested NetCDF format
852	IF ( netcdf_data_format == 1 ) THEN
853	!
854	!-- Classic NetCDF format
855	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
856
857	ELSEIF ( netcdf_data_format == 2 ) THEN
858	!
859	!-- 64bit-offset format
860	nc_stat = NF90_CREATE( filename, &
861	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
862	id_set_xz(av) )
863
864	#if defined( __netcdf4 )
865	ELSEIF ( netcdf_data_format == 3 ) THEN
866	!
867	!-- NetCDF4/HDF5 format
868	nc_stat = NF90_CREATE( filename, &
869	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
870	id_set_xz(av), COMM = comm2d, &
871	INFO = MPI_INFO_NULL )
872
873	ELSEIF ( netcdf_data_format == 4 ) THEN
874	!
875	!-- NetCDF4/HDF5 format with classic model flag
876	nc_stat = NF90_CREATE( filename, &
877	OR( NF90_NOCLOBBER, &
878	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
879	id_set_xz(av), COMM = comm2d, &
880	INFO = MPI_INFO_NULL )
881	#endif
882	ENDIF
883
884	CALL handle_netcdf_error( 'check_open', 25 )
885
886	!
887	!-- Define the header
888	CALL define_netcdf_header( 'xz', netcdf_extend, av )
889
890	!
891	!-- In case of parallel NetCDF output, create flag file which tells
892	!-- combine_plot_fields that nothing is to do.
893	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
894	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
895	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
896	CLOSE( 99 )
897	ENDIF
898
899	ENDIF
900
901	CASE ( 103, 113 )
902	!
903	!-- Set filename depending on unit number
904	IF ( file_id == 103 ) THEN
905	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
906	av = 0
907	ELSE
908	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
909	av = 1
910	ENDIF
911	!
912	!-- Inquire, if there is a NetCDF file from a previuos run. This should
913	!-- be opened for extension, if its dimensions and variables match the
914	!-- actual run.
915	INQUIRE( FILE=filename, EXIST=netcdf_extend )
916
917	IF ( netcdf_extend ) THEN
918	!
919	!-- Open an existing NetCDF file for output
920	IF ( netcdf_data_format < 3 ) THEN
921	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
922	ELSE
923	#if defined( __netcdf4 )
924	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
925	COMM = comm2d, INFO = MPI_INFO_NULL )
926	#endif
927	ENDIF
928
929	CALL handle_netcdf_error( 'check_open', 26 )
930	!
931	!-- Read header information and set all ids. If there is a mismatch
932	!-- between the previuos and the actual run, netcdf_extend is returned
933	!-- as .FALSE.
934	CALL define_netcdf_header( 'yz', netcdf_extend, av )
935
936	!
937	!-- Remove the local file, if it can not be extended
938	IF ( .NOT. netcdf_extend ) THEN
939	nc_stat = NF90_CLOSE( id_set_yz(av) )
940	CALL handle_netcdf_error( 'check_open', 27 )
941	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
942	ENDIF
943
944	ENDIF
945
946	IF ( .NOT. netcdf_extend ) THEN
947	!
948	!-- Create a new NetCDF output file with requested NetCDF format
949	IF ( netcdf_data_format == 1 ) THEN
950	!
951	!-- Classic NetCDF format
952	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
953
954	ELSEIF ( netcdf_data_format == 2 ) THEN
955	!
956	!-- 64bit-offset format
957	nc_stat = NF90_CREATE( filename, &
958	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
959	id_set_yz(av) )
960
961	#if defined( __netcdf4 )
962	ELSEIF ( netcdf_data_format == 3 ) THEN
963	!
964	!-- NetCDF4/HDF5 format
965	nc_stat = NF90_CREATE( filename, &
966	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
967	id_set_yz(av), COMM = comm2d, &
968	INFO = MPI_INFO_NULL )
969
970	ELSEIF ( netcdf_data_format == 4 ) THEN
971	!
972	!-- NetCDF4/HDF5 format with classic model flag
973	nc_stat = NF90_CREATE( filename, &
974	OR( NF90_NOCLOBBER, &
975	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
976	id_set_yz(av), COMM = comm2d, &
977	INFO = MPI_INFO_NULL )
978	#endif
979	ENDIF
980
981	CALL handle_netcdf_error( 'check_open', 28 )
982
983	!
984	!-- Define the header
985	CALL define_netcdf_header( 'yz', netcdf_extend, av )
986
987	!
988	!-- In case of parallel NetCDF output, create flag file which tells
989	!-- combine_plot_fields that nothing is to do.
990	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
991	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
992	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
993	CLOSE( 99 )
994	ENDIF
995
996	ENDIF
997
998	CASE ( 104 )
999	!
1000	!-- Set filename
1001	filename = 'DATA_1D_PR_NETCDF' // coupling_char
1002
1003	!
1004	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1005	!-- be opened for extension, if its variables match the actual run.
1006	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1007
1008	IF ( netcdf_extend ) THEN
1009	!
1010	!-- Open an existing NetCDF file for output
1011	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
1012	CALL handle_netcdf_error( 'check_open', 29 )
1013	!
1014	!-- Read header information and set all ids. If there is a mismatch
1015	!-- between the previuos and the actual run, netcdf_extend is returned
1016	!-- as .FALSE.
1017	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1018
1019	!
1020	!-- Remove the local file, if it can not be extended
1021	IF ( .NOT. netcdf_extend ) THEN
1022	nc_stat = NF90_CLOSE( id_set_pr )
1023	CALL handle_netcdf_error( 'check_open', 30 )
1024	CALL local_system( 'rm ' // TRIM( filename ) )
1025	ENDIF
1026
1027	ENDIF
1028
1029	IF ( .NOT. netcdf_extend ) THEN
1030	!
1031	!-- Create a new NetCDF output file
1032	IF ( netcdf_data_format > 1 ) THEN
1033	nc_stat = NF90_CREATE( filename, &
1034	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1035	id_set_pr )
1036	ELSE
1037	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1038	ENDIF
1039	CALL handle_netcdf_error( 'check_open', 31 )
1040	!
1041	!-- Define the header
1042	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1043
1044	ENDIF
1045
1046	CASE ( 105 )
1047	!
1048	!-- Set filename
1049	filename = 'DATA_1D_TS_NETCDF' // coupling_char
1050
1051	!
1052	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1053	!-- be opened for extension, if its variables match the actual run.
1054	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1055
1056	IF ( netcdf_extend ) THEN
1057	!
1058	!-- Open an existing NetCDF file for output
1059	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1060	CALL handle_netcdf_error( 'check_open', 32 )
1061	!
1062	!-- Read header information and set all ids. If there is a mismatch
1063	!-- between the previuos and the actual run, netcdf_extend is returned
1064	!-- as .FALSE.
1065	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1066
1067	!
1068	!-- Remove the local file, if it can not be extended
1069	IF ( .NOT. netcdf_extend ) THEN
1070	nc_stat = NF90_CLOSE( id_set_ts )
1071	CALL handle_netcdf_error( 'check_open', 33 )
1072	CALL local_system( 'rm ' // TRIM( filename ) )
1073	ENDIF
1074
1075	ENDIF
1076
1077	IF ( .NOT. netcdf_extend ) THEN
1078	!
1079	!-- Create a new NetCDF output file
1080	IF ( netcdf_data_format > 1 ) THEN
1081	nc_stat = NF90_CREATE( filename, &
1082	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1083	id_set_ts )
1084	ELSE
1085	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1086	ENDIF
1087	CALL handle_netcdf_error( 'check_open', 34 )
1088	!
1089	!-- Define the header
1090	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1091
1092	ENDIF
1093
1094
1095	CASE ( 106, 116 )
1096	!
1097	!-- Set filename depending on unit number
1098	IF ( file_id == 106 ) THEN
1099	filename = 'DATA_3D_NETCDF' // coupling_char
1100	av = 0
1101	ELSE
1102	filename = 'DATA_3D_AV_NETCDF' // coupling_char
1103	av = 1
1104	ENDIF
1105	!
1106	!-- Inquire, if there is a NetCDF file from a previous run. This should
1107	!-- be opened for extension, if its dimensions and variables match the
1108	!-- actual run.
1109	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1110
1111	IF ( netcdf_extend ) THEN
1112	!
1113	!-- Open an existing NetCDF file for output
1114	#if defined( __netcdf4 )
1115	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1116	COMM = comm2d, INFO = MPI_INFO_NULL )
1117	#else
1118	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1119	#endif
1120	CALL handle_netcdf_error( 'check_open', 35 )
1121	!
1122	!-- Read header information and set all ids. If there is a mismatch
1123	!-- between the previuos and the actual run, netcdf_extend is returned
1124	!-- as .FALSE.
1125	CALL define_netcdf_header( '3d', netcdf_extend, av )
1126
1127	!
1128	!-- Remove the local file, if it can not be extended
1129	IF ( .NOT. netcdf_extend ) THEN
1130	nc_stat = NF90_CLOSE( id_set_3d(av) )
1131	CALL handle_netcdf_error( 'check_open', 36 )
1132	CALL local_system('rm ' // TRIM( filename ) )
1133	ENDIF
1134
1135	ENDIF
1136
1137	IF ( .NOT. netcdf_extend ) THEN
1138	!
1139	!-- Create a new NetCDF output file with requested NetCDF format
1140	IF ( netcdf_data_format == 1 ) THEN
1141	!
1142	!-- Classic NetCDF format
1143	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1144
1145	ELSEIF ( netcdf_data_format == 2 ) THEN
1146	!
1147	!-- 64bit-offset format
1148	nc_stat = NF90_CREATE( filename, &
1149	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1150	id_set_3d(av) )
1151
1152	#if defined( __netcdf4 )
1153	ELSEIF ( netcdf_data_format == 3 ) THEN
1154	!
1155	!-- NetCDF4/HDF5 format
1156	nc_stat = NF90_CREATE( filename, &
1157	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1158	id_set_3d(av), COMM = comm2d, &
1159	INFO = MPI_INFO_NULL )
1160
1161	ELSEIF ( netcdf_data_format == 4 ) THEN
1162	!
1163	!-- NetCDF4/HDF5 format with classic model flag
1164	nc_stat = NF90_CREATE( filename, &
1165	OR( NF90_NOCLOBBER, &
1166	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1167	id_set_3d(av), COMM = comm2d, &
1168	INFO = MPI_INFO_NULL )
1169	#endif
1170	ENDIF
1171
1172	CALL handle_netcdf_error( 'check_open', 37 )
1173
1174	!
1175	!-- Define the header
1176	CALL define_netcdf_header( '3d', netcdf_extend, av )
1177
1178	!
1179	!-- In case of parallel NetCDF output, create flag file which tells
1180	!-- combine_plot_fields that nothing is to do.
1181	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1182	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1183	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1184	CLOSE( 99 )
1185	ENDIF
1186
1187	ENDIF
1188
1189
1190	CASE ( 107 )
1191	!
1192	!-- Set filename
1193	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1194
1195	!
1196	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1197	!-- be opened for extension, if its variables match the actual run.
1198	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1199
1200	IF ( netcdf_extend ) THEN
1201	!
1202	!-- Open an existing NetCDF file for output
1203	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1204	CALL handle_netcdf_error( 'check_open', 38 )
1205
1206	!
1207	!-- Read header information and set all ids. If there is a mismatch
1208	!-- between the previuos and the actual run, netcdf_extend is returned
1209	!-- as .FALSE.
1210	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1211
1212	!
1213	!-- Remove the local file, if it can not be extended
1214	IF ( .NOT. netcdf_extend ) THEN
1215	nc_stat = NF90_CLOSE( id_set_sp )
1216	CALL handle_netcdf_error( 'check_open', 39 )
1217	CALL local_system( 'rm ' // TRIM( filename ) )
1218	ENDIF
1219
1220	ENDIF
1221
1222	IF ( .NOT. netcdf_extend ) THEN
1223	!
1224	!-- Create a new NetCDF output file
1225	IF ( netcdf_data_format > 1 ) THEN
1226	nc_stat = NF90_CREATE( filename, &
1227	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1228	id_set_sp )
1229	ELSE
1230	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1231	ENDIF
1232	CALL handle_netcdf_error( 'check_open', 40 )
1233	!
1234	!-- Define the header
1235	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1236
1237	ENDIF
1238
1239
1240	CASE ( 108 )
1241
1242	IF ( myid_char == '' ) THEN
1243	filename = 'DATA_PRT_NETCDF' // coupling_char
1244	ELSE
1245	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1246	myid_char
1247	ENDIF
1248	!
1249	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1250	!-- be opened for extension, if its variables match the actual run.
1251	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1252
1253	IF ( netcdf_extend ) THEN
1254	!
1255	!-- Open an existing NetCDF file for output
1256	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1257	CALL handle_netcdf_error( 'check_open', 41 )
1258	!
1259	!-- Read header information and set all ids. If there is a mismatch
1260	!-- between the previuos and the actual run, netcdf_extend is returned
1261	!-- as .FALSE.
1262	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1263
1264	!
1265	!-- Remove the local file, if it can not be extended
1266	IF ( .NOT. netcdf_extend ) THEN
1267	nc_stat = NF90_CLOSE( id_set_prt )
1268	CALL handle_netcdf_error( 'check_open', 42 )
1269	CALL local_system( 'rm ' // filename )
1270	ENDIF
1271
1272	ENDIF
1273
1274	IF ( .NOT. netcdf_extend ) THEN
1275
1276	!
1277	!-- For runs on multiple processors create the subdirectory
1278	IF ( myid_char /= '' ) THEN
1279	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1280	THEN ! needs modification in case of non-extendable sets
1281	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1282	TRIM( coupling_char ) // '/' )
1283	ENDIF
1284	#if defined( __parallel )
1285	!
1286	!-- Set a barrier in order to allow that all other processors in the
1287	!-- directory created by PE0 can open their file
1288	CALL MPI_BARRIER( comm2d, ierr )
1289	#endif
1290	ENDIF
1291
1292	!
1293	!-- Create a new NetCDF output file with requested NetCDF format
1294	IF ( netcdf_data_format == 1 ) THEN
1295	!
1296	!-- Classic NetCDF format
1297	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1298
1299	ELSEIF ( netcdf_data_format == 2 ) THEN
1300	!
1301	!-- 64bit-offset format
1302	nc_stat = NF90_CREATE( filename, &
1303	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1304	id_set_prt )
1305
1306	#if defined( __netcdf4 )
1307	ELSEIF ( netcdf_data_format == 3 ) THEN
1308	!
1309	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
1310	nc_stat = NF90_CREATE( filename, &
1311	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1312	id_set_prt )
1313
1314	ELSEIF ( netcdf_data_format == 4 ) THEN
1315	!
1316	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
1317	!-- output into a single file!
1318	nc_stat = NF90_CREATE( filename, &
1319	OR( NF90_NOCLOBBER, &
1320	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1321	id_set_prt )
1322	#endif
1323	ENDIF
1324
1325	CALL handle_netcdf_error( 'check_open', 43 )
1326
1327	!
1328	!-- Define the header
1329	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1330
1331	ENDIF
1332
1333	CASE ( 109 )
1334	!
1335	!-- Set filename
1336	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1337
1338	!
1339	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1340	!-- be opened for extension, if its variables match the actual run.
1341	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1342
1343	IF ( netcdf_extend ) THEN
1344	!
1345	!-- Open an existing NetCDF file for output
1346	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1347	CALL handle_netcdf_error( 'check_open', 393 )
1348	!
1349	!-- Read header information and set all ids. If there is a mismatch
1350	!-- between the previuos and the actual run, netcdf_extend is returned
1351	!-- as .FALSE.
1352	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1353
1354	!
1355	!-- Remove the local file, if it can not be extended
1356	IF ( .NOT. netcdf_extend ) THEN
1357	nc_stat = NF90_CLOSE( id_set_pts )
1358	CALL handle_netcdf_error( 'check_open', 394 )
1359	CALL local_system( 'rm ' // TRIM( filename ) )
1360	ENDIF
1361
1362	ENDIF
1363
1364	IF ( .NOT. netcdf_extend ) THEN
1365	!
1366	!-- Create a new NetCDF output file
1367	IF ( netcdf_data_format > 1 ) THEN
1368	nc_stat = NF90_CREATE( filename, &
1369	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1370	id_set_pts )
1371	ELSE
1372	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1373	ENDIF
1374	CALL handle_netcdf_error( 'check_open', 395 )
1375	!
1376	!-- Define the header
1377	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1378
1379	ENDIF
1380
1381	CASE ( 201:200+2*max_masks )
1382	!
1383	!-- Set filename depending on unit number
1384	IF ( file_id <= 200+max_masks ) THEN
1385	mid = file_id - 200
1386	WRITE ( mask_char,'(I2.2)') mid
1387	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1388	av = 0
1389	ELSE
1390	mid = file_id - (200+max_masks)
1391	WRITE ( mask_char,'(I2.2)') mid
1392	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1393	coupling_char
1394	av = 1
1395	ENDIF
1396	!
1397	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1398	!-- be opened for extension, if its dimensions and variables match the
1399	!-- actual run.
1400	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1401
1402	IF ( netcdf_extend ) THEN
1403	!
1404	!-- Open an existing NetCDF file for output
1405	#if defined( __netcdf4 )
1406	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1407	COMM = comm2d, INFO = MPI_INFO_NULL )
1408	#else
1409	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1410	#endif
1411	CALL handle_netcdf_error( 'check_open', 456 )
1412	!
1413	!-- Read header information and set all ids. If there is a mismatch
1414	!-- between the previuos and the actual run, netcdf_extend is returned
1415	!-- as .FALSE.
1416	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1417
1418	!
1419	!-- Remove the local file, if it can not be extended
1420	IF ( .NOT. netcdf_extend ) THEN
1421	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1422	CALL handle_netcdf_error( 'check_open', 457 )
1423	CALL local_system('rm ' // TRIM( filename ) )
1424	ENDIF
1425
1426	ENDIF
1427
1428	IF ( .NOT. netcdf_extend ) THEN
1429	!
1430	!-- Create a new NetCDF output file with requested NetCDF format
1431	IF ( netcdf_data_format == 1 ) THEN
1432	!
1433	!-- Classic NetCDF format
1434	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1435	id_set_mask(mid,av) )
1436
1437	ELSEIF ( netcdf_data_format == 2 ) THEN
1438	!
1439	!-- 64bit-offset format
1440	nc_stat = NF90_CREATE( filename, &
1441	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1442	id_set_mask(mid,av) )
1443
1444
1445	#if defined( __netcdf4 )
1446	ELSEIF ( netcdf_data_format == 3 ) THEN
1447	!
1448	!-- NetCDF4/HDF5 format
1449	nc_stat = NF90_CREATE( filename, &
1450	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1451	id_set_mask(mid,av), COMM = comm2d, &
1452	INFO = MPI_INFO_NULL )
1453
1454	ELSEIF ( netcdf_data_format == 4 ) THEN
1455	!
1456	!-- NetCDF4/HDF5 format with classic model flag
1457	nc_stat = NF90_CREATE( filename, &
1458	OR( NF90_NOCLOBBER, &
1459	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1460	id_set_mask(mid,av), COMM = comm2d, &
1461	INFO = MPI_INFO_NULL )
1462	#endif
1463	ENDIF
1464
1465	CALL handle_netcdf_error( 'check_open', 458 )
1466	!
1467	!-- Define the header
1468	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1469
1470	ENDIF
1471
1472
1473	#else
1474
1475	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1476
1477	!
1478	!-- Nothing is done in case of missing netcdf support
1479	RETURN
1480
1481	#endif
1482
1483	CASE DEFAULT
1484
1485	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1486	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1487
1488	END SELECT
1489
1490	!
1491	!-- Set open flag
1492	openfile(file_id)%opened = .TRUE.
1493
1494	!
1495	!-- Formats
1496	3300 FORMAT ('#'/ &
1497	'coord 1 file=',A,' filetype=unformatted'/ &
1498	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1499	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1500	'#')
1501	4000 FORMAT ('# ',A)
1502	5000 FORMAT ('# ',A/ &
1503	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1504	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1505	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1506	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1507	8000 FORMAT (A/ &
1508	' step time # of parts lPE sent/recv rPE sent/recv ',&
1509	'sPE sent/recv nPE sent/recv max # of parts'/ &
1510	103('-'))
1511
1512	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 600

Download in other formats: