Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 1029

Last change on this file since 1029 was 965, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 56.3 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_open.f90 965 2012-07-26 09:29:52Z maronga $
11	!
12	! 964 2012-07-26 09:14:24Z raasch
13	! old profil-units (40:49) removed,
14	! append feature removed from unit 14
15	!
16	! 849 2012-03-15 10:35:09Z raasch
17	! comment changed
18	!
19	! 809 2012-01-30 13:32:58Z maronga
20	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
21	!
22	! 807 2012-01-25 11:53:51Z maronga
23	! New cpp directive "__check" implemented which is used by check_namelist_files
24	!
25	! Bugfix concerning opening of 3D files in restart runs in case of netCDF4
26	!
27	! 667 2010-12-23 12:06:00Z suehring/gryschka
28	! Output of total array size was adapted to nbgp.
29	!
30	! 600 2010-11-24 16:10:51Z raasch
31	! bugfix in opening of cross section netcdf-files (parallel opening with
32	! netcdf4 only works for netcdf_data_format > 2)
33	!
34	! 564 2010-09-30 13:18:59Z helmke
35	! start number of mask output files changed to 201, netcdf message identifiers
36	! of masked output changed
37	!
38	! 519 2010-03-19 05:30:02Z raasch
39	! NetCDF4 support for particle data
40	!
41	! 493 2010-03-01 08:30:24Z raasch
42	! NetCDF4 support (parallel output)
43	!
44	! 410 2009-12-04 17:05:40Z letzel
45	! masked data output
46	!
47	! 277 2009-03-31 09:13:47Z heinze
48	! Output of NetCDF messages with aid of message handling routine.
49	! Output of messages replaced by message handling routine
50	!
51	! 146 2008-01-17 13:08:34Z raasch
52	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
53	! because only this file contains the global variables,
54	! myid_char_14 removed
55	!
56	! 120 2007-10-17 11:54:43Z raasch
57	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
58	!
59	! 105 2007-08-08 07:12:55Z raasch
60	! Different filenames are used in case of a coupled simulation,
61	! coupling_char added to all relevant filenames
62	!
63	! 82 2007-04-16 15:40:52Z raasch
64	! Call of local_getenv removed, preprocessor directives for old systems removed
65	!
66	! 46 2007-03-05 06:00:47Z raasch
67	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
68	!
69	! RCS Log replace by Id keyword, revision history cleaned up
70	!
71	! Revision 1.44 2006/08/22 13:48:34 raasch
72	! xz and yz cross sections now up to nzt+1
73	!
74	! Revision 1.1 1997/08/11 06:10:55 raasch
75	! Initial revision
76	!
77	!
78	! Description:
79	! ------------
80	! Check if file unit is open. If not, open file and, if necessary, write a
81	! header or start other initializing actions, respectively.
82	!------------------------------------------------------------------------------!
83
84	USE array_kind
85	USE arrays_3d
86	USE control_parameters
87	USE grid_variables
88	USE indices
89	USE netcdf_control
90	USE particle_attributes
91	USE pegrid
92	USE profil_parameter
93	USE statistics
94
95	IMPLICIT NONE
96
97	CHARACTER (LEN=2) :: mask_char, suffix
98	CHARACTER (LEN=20) :: xtext = 'time in s'
99	CHARACTER (LEN=30) :: filename
100	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
101	avs_data_file_localname
102	CHARACTER (LEN=80) :: rtext
103	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
104	batch_scp, zeile
105	CHARACTER (LEN=400) :: command
106
107	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
108	j, k, legpos = 1, timodex = 1
109	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
110
111	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
112	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
113	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
114
115	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
116	sizex = 250.0, sizey = 40.0, texfac = 1.5
117
118	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
119	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
120
121
122	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
123	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
124	rand, rlegfak, sizex, sizey, texfac, &
125	timodex, twoxa, twoya, xtext
126
127
128	!
129	!-- Immediate return if file already open
130	IF ( openfile(file_id)%opened ) RETURN
131
132	#if ! defined ( __check )
133	!
134	!-- Only certain files are allowed to be re-opened
135	!-- NOTE: some of the other files perhaps also could be re-opened, but it
136	!-- has not been checked so far, if it works!
137	IF ( openfile(file_id)%opened_before ) THEN
138	SELECT CASE ( file_id )
139	CASE ( 13, 14, 21, 22, 23, 80:85 )
140	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
141	message_string = 're-open of unit ' // &
142	'14 is not verified. Please check results!'
143	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
144	ENDIF
145
146	CASE DEFAULT
147	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
148	' is not allowed'
149	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
150
151	RETURN
152
153	END SELECT
154	ENDIF
155	#endif
156
157	!
158	!-- Check if file may be opened on the relevant PE
159	SELECT CASE ( file_id )
160
161	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109 )
162
163	IF ( myid /= 0 ) THEN
164	WRITE( message_string, * ) 'opening file-id ',file_id, &
165	' not allowed for PE ',myid
166	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
167	ENDIF
168
169	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
170
171	IF ( netcdf_data_format < 3 ) THEN
172
173	IF ( myid /= 0 ) THEN
174	WRITE( message_string, * ) 'opening file-id ',file_id, &
175	' not allowed for PE ',myid
176	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
177	ENDIF
178
179	ENDIF
180
181	CASE ( 21, 22, 23 )
182
183	IF ( .NOT. data_output_2d_on_each_pe ) THEN
184	IF ( myid /= 0 ) THEN
185	WRITE( message_string, * ) 'opening file-id ',file_id, &
186	' not allowed for PE ',myid
187	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
188	END IF
189	ENDIF
190
191	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
192
193	!
194	!-- File-ids that are used temporarily in other routines
195	WRITE( message_string, * ) 'opening file-id ',file_id, &
196	' is not allowed since it is used otherwise'
197	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
198
199	END SELECT
200
201	!
202	!-- Open relevant files
203	SELECT CASE ( file_id )
204
205	CASE ( 11 )
206
207	#if defined ( __check )
208	!
209	!-- In case of a prior parameter file check, the p3d data is stored in
210	!-- PARIN, while the p3df is stored in PARINF. This only applies to
211	!-- check_namelist_files!
212	IF ( check_restart == 2 ) THEN
213	OPEN ( 11, FILE='PARINF'//coupling_char, FORM='FORMATTED', &
214	STATUS='OLD' )
215	ELSE
216	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
217	STATUS='OLD' )
218	END IF
219	#else
220
221	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
222	STATUS='OLD' )
223	#endif
224
225	CASE ( 13 )
226
227	IF ( myid_char == '' ) THEN
228	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
229	FORM='UNFORMATTED', STATUS='OLD' )
230	ELSE
231	!
232	!-- First opening of unit 13 openes file _0000 on all PEs because only
233	!-- this file contains the global variables
234	IF ( .NOT. openfile(file_id)%opened_before ) THEN
235	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
236	FORM='UNFORMATTED', STATUS='OLD' )
237	ELSE
238	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
239	FORM='UNFORMATTED', STATUS='OLD' )
240	ENDIF
241	ENDIF
242
243	CASE ( 14 )
244
245	IF ( myid_char == '' ) THEN
246	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
247	FORM='UNFORMATTED', POSITION='APPEND' )
248	ELSE
249	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
250	CALL local_system( 'mkdir BINOUT' // coupling_char )
251	ENDIF
252	#if defined( __parallel ) && ! defined ( __check )
253	!
254	!-- Set a barrier in order to allow that all other processors in the
255	!-- directory created by PE0 can open their file
256	CALL MPI_BARRIER( comm2d, ierr )
257	#endif
258	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
259	FORM='UNFORMATTED' )
260	ENDIF
261
262	CASE ( 15 )
263
264	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
265
266	CASE ( 16 )
267
268	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
269
270	CASE ( 17 )
271
272	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
273
274	CASE ( 18 )
275
276	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
277
278	CASE ( 19 )
279
280	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
281
282	CASE ( 20 )
283
284	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
285	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
286	ENDIF
287	IF ( myid_char == '' ) THEN
288	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
289	FORM='UNFORMATTED', POSITION='APPEND' )
290	ELSE
291	#if defined( __parallel ) && ! defined ( __check )
292	!
293	!-- Set a barrier in order to allow that all other processors in the
294	!-- directory created by PE0 can open their file
295	CALL MPI_BARRIER( comm2d, ierr )
296	#endif
297	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
298	FORM='UNFORMATTED', POSITION='APPEND' )
299	ENDIF
300
301	CASE ( 21 )
302
303	IF ( data_output_2d_on_each_pe ) THEN
304	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
305	FORM='UNFORMATTED', POSITION='APPEND' )
306	ELSE
307	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
308	FORM='UNFORMATTED', POSITION='APPEND' )
309	ENDIF
310
311	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
312	!
313	!-- Output for combine_plot_fields
314	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
315	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
316	WRITE (21) 0, nx+1, 0, ny+1 ! output part
317	ENDIF
318	!
319	!-- Determine and write ISO2D coordiante header
320	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
321	hu = 0.0
322	ho = (ny+1) * dy
323	DO i = 1, ny
324	eta(i) = REAL( i ) / ( ny + 1.0 )
325	ENDDO
326	eta(0) = 0.0
327	eta(ny+1) = 1.0
328
329	WRITE (21) dx,eta,hu,ho
330	DEALLOCATE( eta, ho, hu )
331
332	!
333	!-- Create output file for local parameters
334	IF ( iso2d_output ) THEN
335	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
336	FORM='FORMATTED', DELIM='APOSTROPHE' )
337	openfile(27)%opened = .TRUE.
338	ENDIF
339
340	ENDIF
341
342	CASE ( 22 )
343
344	IF ( data_output_2d_on_each_pe ) THEN
345	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
346	FORM='UNFORMATTED', POSITION='APPEND' )
347	ELSE
348	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
349	POSITION='APPEND' )
350	ENDIF
351
352	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
353	!
354	!-- Output for combine_plot_fields
355	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
356	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
357	WRITE (22) 0, nx+1, 0, nz+1 ! output part
358	ENDIF
359	!
360	!-- Determine and write ISO2D coordiante header
361	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
362	hu = 0.0
363	ho = zu(nz+1)
364	DO i = 1, nz
365	eta(i) = REAL( zu(i) ) / zu(nz+1)
366	ENDDO
367	eta(0) = 0.0
368	eta(nz+1) = 1.0
369
370	WRITE (22) dx,eta,hu,ho
371	DEALLOCATE( eta, ho, hu )
372	!
373	!-- Create output file for local parameters
374	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
375	FORM='FORMATTED', DELIM='APOSTROPHE' )
376	openfile(28)%opened = .TRUE.
377
378	ENDIF
379
380	CASE ( 23 )
381
382	IF ( data_output_2d_on_each_pe ) THEN
383	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
384	FORM='UNFORMATTED', POSITION='APPEND' )
385	ELSE
386	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
387	POSITION='APPEND' )
388	ENDIF
389
390	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
391	!
392	!-- Output for combine_plot_fields
393	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
394	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
395	WRITE (23) 0, ny+1, 0, nz+1 ! output part
396	ENDIF
397	!
398	!-- Determine and write ISO2D coordiante header
399	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
400	hu = 0.0
401	ho = zu(nz+1)
402	DO i = 1, nz
403	eta(i) = REAL( zu(i) ) / zu(nz+1)
404	ENDDO
405	eta(0) = 0.0
406	eta(nz+1) = 1.0
407
408	WRITE (23) dx,eta,hu,ho
409	DEALLOCATE( eta, ho, hu )
410	!
411	!-- Create output file for local parameters
412	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
413	FORM='FORMATTED', DELIM='APOSTROPHE' )
414	openfile(29)%opened = .TRUE.
415
416	ENDIF
417
418	CASE ( 30 )
419
420	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
421	FORM='UNFORMATTED' )
422	!
423	!-- Write coordinate file for AVS
424	IF ( myid == 0 ) THEN
425	#if defined( __parallel )
426	!
427	!-- Specifications for combine_plot_fields
428	IF ( .NOT. do3d_compress ) THEN
429	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp, 0 ,nz_do3d
430	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
431	ENDIF
432	#endif
433	!
434	!-- Write coordinate file for AVS:
435	!-- First determine file names (including cyle numbers) of AVS files on
436	!-- target machine (to which the files are to be transferred).
437	!-- Therefore path information has to be obtained first.
438	IF ( avs_output ) THEN
439	iaddres = LEN_TRIM( return_addres )
440	iusern = LEN_TRIM( return_username )
441
442	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
443	DO WHILE ( .NOT. avs_coor_file_found .OR. &
444	.NOT. avs_data_file_found )
445
446	READ ( 3, '(A)', END=1 ) zeile
447
448	SELECT CASE ( zeile(1:11) )
449
450	CASE ( 'PLOT3D_COOR' )
451	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
452	avs_coor_file_localname
453	avs_coor_file_found = .TRUE.
454
455	CASE ( 'PLOT3D_DATA' )
456	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
457	avs_data_file_localname
458	avs_data_file_found = .TRUE.
459
460	CASE DEFAULT
461	READ ( 3, '(A/A)' ) zeile, zeile
462
463	END SELECT
464
465	ENDDO
466	!
467	!-- Now the cycle numbers on the remote machine must be obtained
468	!-- using batch_scp
469	1 CLOSE ( 3 )
470	IF ( .NOT. avs_coor_file_found .OR. &
471	.NOT. avs_data_file_found ) THEN
472	message_string= 'no filename for AVS-data-file ' // &
473	'found in MRUN-config-file' // &
474	' &filename in FLD-file set to "unknown"'
475	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
476
477	avs_coor_file = 'unknown'
478	avs_data_file = 'unknown'
479	ELSE
480	get_filenames = .TRUE.
481	IF ( TRIM( host ) == 'hpmuk' .OR. &
482	TRIM( host ) == 'lcmuk' ) THEN
483	batch_scp = '/home/raasch/pub/batch_scp'
484	ELSEIF ( TRIM( host ) == 'nech' ) THEN
485	batch_scp = '/ipf/b/b323011/pub/batch_scp'
486	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
487	TRIM( host ) == 'ibmb' ) THEN
488	batch_scp = '/home/h/niksiraa/pub/batch_scp'
489	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
490	batch_scp = '/home/nhbksira/pub/batch_scp'
491	ELSE
492	message_string= 'no path for batch_scp on host "' // &
493	TRIM( host ) // '"'
494	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
495	get_filenames = .FALSE.
496	ENDIF
497
498	IF ( get_filenames ) THEN
499	!
500	!-- Determine the coordinate file name.
501	!-- /etc/passwd serves as Dummy-Datei, because it is not
502	!-- really transferred.
503	command = TRIM( batch_scp ) // ' -n -u ' // &
504	return_username(1:iusern) // ' ' // &
505	return_addres(1:iaddres) // ' /etc/passwd "' // &
506	TRIM( avs_coor_file_catalog ) // '" ' // &
507	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
508
509	CALL local_system( command )
510	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
511	READ ( 3, '(A)' ) avs_coor_file
512	CLOSE ( 3 )
513	!
514	!-- Determine the data file name
515	command = TRIM( batch_scp ) // ' -n -u ' // &
516	return_username(1:iusern) // ' ' // &
517	return_addres(1:iaddres) // ' /etc/passwd "' // &
518	TRIM( avs_data_file_catalog ) // '" ' // &
519	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
520
521	CALL local_system( command )
522	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
523	READ ( 3, '(A)' ) avs_data_file
524	CLOSE ( 3 )
525
526	ELSE
527
528	avs_coor_file = 'unknown'
529	avs_data_file = 'unknown'
530
531	ENDIF
532
533	ENDIF
534
535	!
536	!-- Output of the coordinate file description for FLD-file
537	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
538	openfile(33)%opened = .TRUE.
539	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
540	TRIM( avs_coor_file ), (nx+2nbgp)4, &
541	TRIM( avs_coor_file ), (nx+2nbgp)4+(ny+2nbgp)4
542
543
544	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
545	DO i = 0, nx+1
546	xkoor(i) = i * dx
547	ENDDO
548	DO j = 0, ny+1
549	ykoor(j) = j * dy
550	ENDDO
551	DO k = 0, nz_do3d
552	zkoor(k) = zu(k)
553	ENDDO
554
555	!
556	!-- Create and write on AVS coordinate file
557	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
558	openfile(31)%opened = .TRUE.
559
560	WRITE (31) xkoor, ykoor, zkoor
561	DEALLOCATE( xkoor, ykoor, zkoor )
562
563	!
564	!-- Create FLD file (being written on in close_file)
565	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
566	openfile(32)%opened = .TRUE.
567
568	!
569	!-- Create flag file for compressed 3D output,
570	!-- influences output commands in mrun
571	IF ( do3d_compress ) THEN
572	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
573	WRITE ( 3, '(1X)' )
574	CLOSE ( 3 )
575	ENDIF
576
577	ENDIF
578
579	ENDIF
580
581	!
582	!-- In case of data compression output of the coordinates of the
583	!-- corresponding partial array of a PE only once at the top of the file
584	IF ( avs_output .AND. do3d_compress ) THEN
585	WRITE ( 30 ) nxlg, nxrg, nysg, nyng, nzb, nz_do3d
586	ENDIF
587
588	CASE ( 50:59 )
589
590	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
591	suffix = ''
592	ELSE
593	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
594	ENDIF
595	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
596	TRIM( suffix ), &
597	FORM='FORMATTED', RECL=496 )
598	!
599	!-- Write PROFIL parameter file for output of time series
600	!-- NOTE: To be on the safe side, this output is done at the beginning of
601	!-- the model run (in case of collapse) and it is repeated in
602	!-- close_file, then, however, with value ranges for the coordinate
603	!-- systems
604	!
605	!-- Firstly determine the number of the coordinate systems to be drawn
606	cranz = 0
607	DO j = 1, 10
608	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
609	ENDDO
610	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
611	TRIM( region( file_id - 50 ) )
612	!
613	!-- Write RAHMEN parameter
614	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
615	TRIM( suffix ), &
616	FORM='FORMATTED', DELIM='APOSTROPHE' )
617	WRITE ( 90, RAHMEN )
618	!
619	!-- Determine and write CROSS parameters for the individual coordinate
620	!-- systems
621	DO j = 1, 10
622	k = cross_ts_number_count(j)
623	IF ( k /= 0 ) THEN
624	!
625	!-- Store curve numbers, colours and line style
626	klist(1:k) = cross_ts_numbers(1:k,j)
627	klist(k+1:10) = 999999
628	!
629	!-- Write CROSS parameter
630	WRITE ( 90, CROSS )
631
632	ENDIF
633	ENDDO
634
635	CLOSE ( 90 )
636	!
637	!-- Write all labels at the top of the data file, but only during the
638	!-- first run of a sequence of jobs. The following jobs copy the time
639	!-- series data to the bottom of that file.
640	IF ( runnr == 0 ) THEN
641	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
642	' ' // TRIM( region( file_id - 50 ) )
643	ENDIF
644
645
646	CASE ( 80 )
647
648	IF ( myid_char == '' ) THEN
649	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
650	FORM='FORMATTED', POSITION='APPEND' )
651	ELSE
652	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
653	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
654	ENDIF
655	#if defined( __parallel ) && ! defined ( __check )
656	!
657	!-- Set a barrier in order to allow that thereafter all other
658	!-- processors in the directory created by PE0 can open their file.
659	!-- WARNING: The following barrier will lead to hanging jobs, if
660	!-- check_open is first called from routine
661	!-- allocate_prt_memory!
662	IF ( .NOT. openfile(80)%opened_before ) THEN
663	CALL MPI_BARRIER( comm2d, ierr )
664	ENDIF
665	#endif
666	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
667	myid_char, &
668	FORM='FORMATTED', POSITION='APPEND' )
669	ENDIF
670
671	IF ( .NOT. openfile(80)%opened_before ) THEN
672	WRITE ( 80, 8000 ) TRIM( run_description_header )
673	ENDIF
674
675	CASE ( 81 )
676
677	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
678	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
679
680	CASE ( 82 )
681
682	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
683	POSITION = 'APPEND' )
684
685	CASE ( 83 )
686
687	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
688	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
689
690	CASE ( 84 )
691
692	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
693	POSITION='APPEND' )
694
695	CASE ( 85 )
696
697	IF ( myid_char == '' ) THEN
698	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
699	FORM='UNFORMATTED', POSITION='APPEND' )
700	ELSE
701	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
702	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
703	ENDIF
704	#if defined( __parallel ) && ! defined ( __check )
705	!
706	!-- Set a barrier in order to allow that thereafter all other
707	!-- processors in the directory created by PE0 can open their file
708	CALL MPI_BARRIER( comm2d, ierr )
709	#endif
710	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
711	myid_char, &
712	FORM='UNFORMATTED', POSITION='APPEND' )
713	ENDIF
714
715	IF ( .NOT. openfile(85)%opened_before ) THEN
716	WRITE ( 85 ) run_description_header
717	!
718	!-- Attention: change version number whenever the output format on
719	!-- unit 85 is changed (see also in routine
720	!-- lpm_data_output_particles)
721	rtext = 'data format version 3.0'
722	WRITE ( 85 ) rtext
723	WRITE ( 85 ) number_of_particle_groups, &
724	max_number_of_particle_groups
725	WRITE ( 85 ) particle_groups
726	ENDIF
727
728	#if defined( __netcdf )
729	CASE ( 101, 111 )
730	!
731	!-- Set filename depending on unit number
732	IF ( file_id == 101 ) THEN
733	filename = 'DATA_2D_XY_NETCDF' // coupling_char
734	av = 0
735	ELSE
736	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
737	av = 1
738	ENDIF
739	!
740	!-- Inquire, if there is a NetCDF file from a previuos run. This should
741	!-- be opened for extension, if its dimensions and variables match the
742	!-- actual run.
743	INQUIRE( FILE=filename, EXIST=netcdf_extend )
744
745	IF ( netcdf_extend ) THEN
746	!
747	!-- Open an existing NetCDF file for output
748	IF ( netcdf_data_format < 3 ) THEN
749	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
750	ELSE
751	#if defined( __netcdf4 )
752	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
753	COMM = comm2d, INFO = MPI_INFO_NULL )
754	#endif
755	ENDIF
756
757	CALL handle_netcdf_error( 'check_open', 20 )
758	!
759	!-- Read header information and set all ids. If there is a mismatch
760	!-- between the previuos and the actual run, netcdf_extend is returned
761	!-- as .FALSE.
762	CALL define_netcdf_header( 'xy', netcdf_extend, av )
763
764	!
765	!-- Remove the local file, if it can not be extended
766	IF ( .NOT. netcdf_extend ) THEN
767	nc_stat = NF90_CLOSE( id_set_xy(av) )
768	CALL handle_netcdf_error( 'check_open', 21 )
769	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
770	ENDIF
771
772	ENDIF
773
774	IF ( .NOT. netcdf_extend ) THEN
775	!
776	!-- Create a new NetCDF output file with requested NetCDF format
777	IF ( netcdf_data_format == 1 ) THEN
778	!
779	!-- Classic NetCDF format
780	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
781
782	ELSEIF ( netcdf_data_format == 2 ) THEN
783	!
784	!-- 64bit-offset format
785	nc_stat = NF90_CREATE( filename, &
786	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
787	id_set_xy(av) )
788
789	#if defined( __netcdf4 )
790	ELSEIF ( netcdf_data_format == 3 ) THEN
791	!
792	!-- NetCDF4/HDF5 format
793	nc_stat = NF90_CREATE( filename, &
794	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
795	id_set_xy(av), COMM = comm2d, &
796	INFO = MPI_INFO_NULL )
797
798	ELSEIF ( netcdf_data_format == 4 ) THEN
799	!
800	!-- NetCDF4/HDF5 format with classic model flag
801	nc_stat = NF90_CREATE( filename, &
802	OR( NF90_NOCLOBBER, &
803	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
804	id_set_xy(av), COMM = comm2d, &
805	INFO = MPI_INFO_NULL )
806	#endif
807	ENDIF
808
809	CALL handle_netcdf_error( 'check_open', 22 )
810
811	!
812	!-- Define the header
813	CALL define_netcdf_header( 'xy', netcdf_extend, av )
814
815	!
816	!-- In case of parallel NetCDF output, create flag file which tells
817	!-- combine_plot_fields that nothing is to do.
818	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
819	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
820	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
821	CLOSE( 99 )
822	ENDIF
823
824	ENDIF
825
826	CASE ( 102, 112 )
827	!
828	!-- Set filename depending on unit number
829	IF ( file_id == 102 ) THEN
830	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
831	av = 0
832	ELSE
833	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
834	av = 1
835	ENDIF
836	!
837	!-- Inquire, if there is a NetCDF file from a previuos run. This should
838	!-- be opened for extension, if its dimensions and variables match the
839	!-- actual run.
840	INQUIRE( FILE=filename, EXIST=netcdf_extend )
841
842	IF ( netcdf_extend ) THEN
843	!
844	!-- Open an existing NetCDF file for output
845	IF ( netcdf_data_format < 3 ) THEN
846	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
847	ELSE
848	#if defined( __netcdf4 )
849	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
850	COMM = comm2d, INFO = MPI_INFO_NULL )
851	#endif
852	ENDIF
853
854	CALL handle_netcdf_error( 'check_open', 23 )
855	!
856	!-- Read header information and set all ids. If there is a mismatch
857	!-- between the previuos and the actual run, netcdf_extend is returned
858	!-- as .FALSE.
859	CALL define_netcdf_header( 'xz', netcdf_extend, av )
860
861	!
862	!-- Remove the local file, if it can not be extended
863	IF ( .NOT. netcdf_extend ) THEN
864	nc_stat = NF90_CLOSE( id_set_xz(av) )
865	CALL handle_netcdf_error( 'check_open', 24 )
866	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
867	ENDIF
868
869	ENDIF
870
871	IF ( .NOT. netcdf_extend ) THEN
872	!
873	!-- Create a new NetCDF output file with requested NetCDF format
874	IF ( netcdf_data_format == 1 ) THEN
875	!
876	!-- Classic NetCDF format
877	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
878
879	ELSEIF ( netcdf_data_format == 2 ) THEN
880	!
881	!-- 64bit-offset format
882	nc_stat = NF90_CREATE( filename, &
883	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
884	id_set_xz(av) )
885
886	#if defined( __netcdf4 )
887	ELSEIF ( netcdf_data_format == 3 ) THEN
888	!
889	!-- NetCDF4/HDF5 format
890	nc_stat = NF90_CREATE( filename, &
891	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
892	id_set_xz(av), COMM = comm2d, &
893	INFO = MPI_INFO_NULL )
894
895	ELSEIF ( netcdf_data_format == 4 ) THEN
896	!
897	!-- NetCDF4/HDF5 format with classic model flag
898	nc_stat = NF90_CREATE( filename, &
899	OR( NF90_NOCLOBBER, &
900	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
901	id_set_xz(av), COMM = comm2d, &
902	INFO = MPI_INFO_NULL )
903	#endif
904	ENDIF
905
906	CALL handle_netcdf_error( 'check_open', 25 )
907
908	!
909	!-- Define the header
910	CALL define_netcdf_header( 'xz', netcdf_extend, av )
911
912	!
913	!-- In case of parallel NetCDF output, create flag file which tells
914	!-- combine_plot_fields that nothing is to do.
915	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
916	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
917	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
918	CLOSE( 99 )
919	ENDIF
920
921	ENDIF
922
923	CASE ( 103, 113 )
924	!
925	!-- Set filename depending on unit number
926	IF ( file_id == 103 ) THEN
927	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
928	av = 0
929	ELSE
930	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
931	av = 1
932	ENDIF
933	!
934	!-- Inquire, if there is a NetCDF file from a previuos run. This should
935	!-- be opened for extension, if its dimensions and variables match the
936	!-- actual run.
937	INQUIRE( FILE=filename, EXIST=netcdf_extend )
938
939	IF ( netcdf_extend ) THEN
940	!
941	!-- Open an existing NetCDF file for output
942	IF ( netcdf_data_format < 3 ) THEN
943	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
944	ELSE
945	#if defined( __netcdf4 )
946	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
947	COMM = comm2d, INFO = MPI_INFO_NULL )
948	#endif
949	ENDIF
950
951	CALL handle_netcdf_error( 'check_open', 26 )
952	!
953	!-- Read header information and set all ids. If there is a mismatch
954	!-- between the previuos and the actual run, netcdf_extend is returned
955	!-- as .FALSE.
956	CALL define_netcdf_header( 'yz', netcdf_extend, av )
957
958	!
959	!-- Remove the local file, if it can not be extended
960	IF ( .NOT. netcdf_extend ) THEN
961	nc_stat = NF90_CLOSE( id_set_yz(av) )
962	CALL handle_netcdf_error( 'check_open', 27 )
963	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
964	ENDIF
965
966	ENDIF
967
968	IF ( .NOT. netcdf_extend ) THEN
969	!
970	!-- Create a new NetCDF output file with requested NetCDF format
971	IF ( netcdf_data_format == 1 ) THEN
972	!
973	!-- Classic NetCDF format
974	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
975
976	ELSEIF ( netcdf_data_format == 2 ) THEN
977	!
978	!-- 64bit-offset format
979	nc_stat = NF90_CREATE( filename, &
980	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
981	id_set_yz(av) )
982
983	#if defined( __netcdf4 )
984	ELSEIF ( netcdf_data_format == 3 ) THEN
985	!
986	!-- NetCDF4/HDF5 format
987	nc_stat = NF90_CREATE( filename, &
988	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
989	id_set_yz(av), COMM = comm2d, &
990	INFO = MPI_INFO_NULL )
991
992	ELSEIF ( netcdf_data_format == 4 ) THEN
993	!
994	!-- NetCDF4/HDF5 format with classic model flag
995	nc_stat = NF90_CREATE( filename, &
996	OR( NF90_NOCLOBBER, &
997	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
998	id_set_yz(av), COMM = comm2d, &
999	INFO = MPI_INFO_NULL )
1000	#endif
1001	ENDIF
1002
1003	CALL handle_netcdf_error( 'check_open', 28 )
1004
1005	!
1006	!-- Define the header
1007	CALL define_netcdf_header( 'yz', netcdf_extend, av )
1008
1009	!
1010	!-- In case of parallel NetCDF output, create flag file which tells
1011	!-- combine_plot_fields that nothing is to do.
1012	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1013	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
1014	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1015	CLOSE( 99 )
1016	ENDIF
1017
1018	ENDIF
1019
1020	CASE ( 104 )
1021	!
1022	!-- Set filename
1023	filename = 'DATA_1D_PR_NETCDF' // coupling_char
1024
1025	!
1026	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1027	!-- be opened for extension, if its variables match the actual run.
1028	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1029
1030	IF ( netcdf_extend ) THEN
1031	!
1032	!-- Open an existing NetCDF file for output
1033	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
1034	CALL handle_netcdf_error( 'check_open', 29 )
1035	!
1036	!-- Read header information and set all ids. If there is a mismatch
1037	!-- between the previuos and the actual run, netcdf_extend is returned
1038	!-- as .FALSE.
1039	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1040
1041	!
1042	!-- Remove the local file, if it can not be extended
1043	IF ( .NOT. netcdf_extend ) THEN
1044	nc_stat = NF90_CLOSE( id_set_pr )
1045	CALL handle_netcdf_error( 'check_open', 30 )
1046	CALL local_system( 'rm ' // TRIM( filename ) )
1047	ENDIF
1048
1049	ENDIF
1050
1051	IF ( .NOT. netcdf_extend ) THEN
1052	!
1053	!-- Create a new NetCDF output file
1054	IF ( netcdf_data_format > 1 ) THEN
1055	nc_stat = NF90_CREATE( filename, &
1056	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1057	id_set_pr )
1058	ELSE
1059	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1060	ENDIF
1061	CALL handle_netcdf_error( 'check_open', 31 )
1062	!
1063	!-- Define the header
1064	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1065
1066	ENDIF
1067
1068	CASE ( 105 )
1069	!
1070	!-- Set filename
1071	filename = 'DATA_1D_TS_NETCDF' // coupling_char
1072
1073	!
1074	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1075	!-- be opened for extension, if its variables match the actual run.
1076	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1077
1078	IF ( netcdf_extend ) THEN
1079	!
1080	!-- Open an existing NetCDF file for output
1081	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1082	CALL handle_netcdf_error( 'check_open', 32 )
1083	!
1084	!-- Read header information and set all ids. If there is a mismatch
1085	!-- between the previuos and the actual run, netcdf_extend is returned
1086	!-- as .FALSE.
1087	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1088
1089	!
1090	!-- Remove the local file, if it can not be extended
1091	IF ( .NOT. netcdf_extend ) THEN
1092	nc_stat = NF90_CLOSE( id_set_ts )
1093	CALL handle_netcdf_error( 'check_open', 33 )
1094	CALL local_system( 'rm ' // TRIM( filename ) )
1095	ENDIF
1096
1097	ENDIF
1098
1099	IF ( .NOT. netcdf_extend ) THEN
1100	!
1101	!-- Create a new NetCDF output file
1102	IF ( netcdf_data_format > 1 ) THEN
1103	nc_stat = NF90_CREATE( filename, &
1104	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1105	id_set_ts )
1106	ELSE
1107	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1108	ENDIF
1109	CALL handle_netcdf_error( 'check_open', 34 )
1110	!
1111	!-- Define the header
1112	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1113
1114	ENDIF
1115
1116
1117	CASE ( 106, 116 )
1118	!
1119	!-- Set filename depending on unit number
1120	IF ( file_id == 106 ) THEN
1121	filename = 'DATA_3D_NETCDF' // coupling_char
1122	av = 0
1123	ELSE
1124	filename = 'DATA_3D_AV_NETCDF' // coupling_char
1125	av = 1
1126	ENDIF
1127	!
1128	!-- Inquire, if there is a NetCDF file from a previous run. This should
1129	!-- be opened for extension, if its dimensions and variables match the
1130	!-- actual run.
1131	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1132
1133	IF ( netcdf_extend ) THEN
1134	!
1135	!-- Open an existing NetCDF file for output
1136	IF ( netcdf_data_format < 3 ) THEN
1137	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1138	ELSE
1139	#if defined( __netcdf4 )
1140	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1141	COMM = comm2d, INFO = MPI_INFO_NULL )
1142	#endif
1143	ENDIF
1144	CALL handle_netcdf_error( 'check_open', 35 )
1145	!
1146	!-- Read header information and set all ids. If there is a mismatch
1147	!-- between the previuos and the actual run, netcdf_extend is returned
1148	!-- as .FALSE.
1149	CALL define_netcdf_header( '3d', netcdf_extend, av )
1150
1151	!
1152	!-- Remove the local file, if it can not be extended
1153	IF ( .NOT. netcdf_extend ) THEN
1154	nc_stat = NF90_CLOSE( id_set_3d(av) )
1155	CALL handle_netcdf_error( 'check_open', 36 )
1156	CALL local_system('rm ' // TRIM( filename ) )
1157	ENDIF
1158
1159	ENDIF
1160
1161	IF ( .NOT. netcdf_extend ) THEN
1162	!
1163	!-- Create a new NetCDF output file with requested NetCDF format
1164	IF ( netcdf_data_format == 1 ) THEN
1165	!
1166	!-- Classic NetCDF format
1167	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1168
1169	ELSEIF ( netcdf_data_format == 2 ) THEN
1170	!
1171	!-- 64bit-offset format
1172	nc_stat = NF90_CREATE( filename, &
1173	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1174	id_set_3d(av) )
1175
1176	#if defined( __netcdf4 )
1177	ELSEIF ( netcdf_data_format == 3 ) THEN
1178	!
1179	!-- NetCDF4/HDF5 format
1180	nc_stat = NF90_CREATE( filename, &
1181	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1182	id_set_3d(av), COMM = comm2d, &
1183	INFO = MPI_INFO_NULL )
1184
1185	ELSEIF ( netcdf_data_format == 4 ) THEN
1186	!
1187	!-- NetCDF4/HDF5 format with classic model flag
1188	nc_stat = NF90_CREATE( filename, &
1189	OR( NF90_NOCLOBBER, &
1190	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1191	id_set_3d(av), COMM = comm2d, &
1192	INFO = MPI_INFO_NULL )
1193	#endif
1194	ENDIF
1195
1196	CALL handle_netcdf_error( 'check_open', 37 )
1197
1198	!
1199	!-- Define the header
1200	CALL define_netcdf_header( '3d', netcdf_extend, av )
1201
1202	!
1203	!-- In case of parallel NetCDF output, create flag file which tells
1204	!-- combine_plot_fields that nothing is to do.
1205	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1206	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1207	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1208	CLOSE( 99 )
1209	ENDIF
1210
1211	ENDIF
1212
1213
1214	CASE ( 107 )
1215	!
1216	!-- Set filename
1217	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1218
1219	!
1220	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1221	!-- be opened for extension, if its variables match the actual run.
1222	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1223
1224	IF ( netcdf_extend ) THEN
1225	!
1226	!-- Open an existing NetCDF file for output
1227	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1228	CALL handle_netcdf_error( 'check_open', 38 )
1229
1230	!
1231	!-- Read header information and set all ids. If there is a mismatch
1232	!-- between the previuos and the actual run, netcdf_extend is returned
1233	!-- as .FALSE.
1234	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1235
1236	!
1237	!-- Remove the local file, if it can not be extended
1238	IF ( .NOT. netcdf_extend ) THEN
1239	nc_stat = NF90_CLOSE( id_set_sp )
1240	CALL handle_netcdf_error( 'check_open', 39 )
1241	CALL local_system( 'rm ' // TRIM( filename ) )
1242	ENDIF
1243
1244	ENDIF
1245
1246	IF ( .NOT. netcdf_extend ) THEN
1247	!
1248	!-- Create a new NetCDF output file
1249	IF ( netcdf_data_format > 1 ) THEN
1250	nc_stat = NF90_CREATE( filename, &
1251	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1252	id_set_sp )
1253	ELSE
1254	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1255	ENDIF
1256	CALL handle_netcdf_error( 'check_open', 40 )
1257	!
1258	!-- Define the header
1259	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1260
1261	ENDIF
1262
1263
1264	CASE ( 108 )
1265
1266	IF ( myid_char == '' ) THEN
1267	filename = 'DATA_PRT_NETCDF' // coupling_char
1268	ELSE
1269	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1270	myid_char
1271	ENDIF
1272	!
1273	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1274	!-- be opened for extension, if its variables match the actual run.
1275	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1276
1277	IF ( netcdf_extend ) THEN
1278	!
1279	!-- Open an existing NetCDF file for output
1280	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1281	CALL handle_netcdf_error( 'check_open', 41 )
1282	!
1283	!-- Read header information and set all ids. If there is a mismatch
1284	!-- between the previuos and the actual run, netcdf_extend is returned
1285	!-- as .FALSE.
1286	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1287
1288	!
1289	!-- Remove the local file, if it can not be extended
1290	IF ( .NOT. netcdf_extend ) THEN
1291	nc_stat = NF90_CLOSE( id_set_prt )
1292	CALL handle_netcdf_error( 'check_open', 42 )
1293	CALL local_system( 'rm ' // filename )
1294	ENDIF
1295
1296	ENDIF
1297
1298	IF ( .NOT. netcdf_extend ) THEN
1299
1300	!
1301	!-- For runs on multiple processors create the subdirectory
1302	IF ( myid_char /= '' ) THEN
1303	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1304	THEN ! needs modification in case of non-extendable sets
1305	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1306	TRIM( coupling_char ) // '/' )
1307	ENDIF
1308	#if defined( __parallel ) && ! defined ( __check )
1309	!
1310	!-- Set a barrier in order to allow that all other processors in the
1311	!-- directory created by PE0 can open their file
1312	CALL MPI_BARRIER( comm2d, ierr )
1313	#endif
1314	ENDIF
1315
1316	!
1317	!-- Create a new NetCDF output file with requested NetCDF format
1318	IF ( netcdf_data_format == 1 ) THEN
1319	!
1320	!-- Classic NetCDF format
1321	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1322
1323	ELSEIF ( netcdf_data_format == 2 ) THEN
1324	!
1325	!-- 64bit-offset format
1326	nc_stat = NF90_CREATE( filename, &
1327	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1328	id_set_prt )
1329
1330	#if defined( __netcdf4 )
1331	ELSEIF ( netcdf_data_format == 3 ) THEN
1332	!
1333	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
1334	nc_stat = NF90_CREATE( filename, &
1335	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1336	id_set_prt )
1337
1338	ELSEIF ( netcdf_data_format == 4 ) THEN
1339	!
1340	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
1341	!-- output into a single file!
1342	nc_stat = NF90_CREATE( filename, &
1343	OR( NF90_NOCLOBBER, &
1344	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1345	id_set_prt )
1346	#endif
1347	ENDIF
1348
1349	CALL handle_netcdf_error( 'check_open', 43 )
1350
1351	!
1352	!-- Define the header
1353	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1354
1355	ENDIF
1356
1357	CASE ( 109 )
1358	!
1359	!-- Set filename
1360	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1361
1362	!
1363	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1364	!-- be opened for extension, if its variables match the actual run.
1365	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1366
1367	IF ( netcdf_extend ) THEN
1368	!
1369	!-- Open an existing NetCDF file for output
1370	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1371	CALL handle_netcdf_error( 'check_open', 393 )
1372	!
1373	!-- Read header information and set all ids. If there is a mismatch
1374	!-- between the previuos and the actual run, netcdf_extend is returned
1375	!-- as .FALSE.
1376	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1377
1378	!
1379	!-- Remove the local file, if it can not be extended
1380	IF ( .NOT. netcdf_extend ) THEN
1381	nc_stat = NF90_CLOSE( id_set_pts )
1382	CALL handle_netcdf_error( 'check_open', 394 )
1383	CALL local_system( 'rm ' // TRIM( filename ) )
1384	ENDIF
1385
1386	ENDIF
1387
1388	IF ( .NOT. netcdf_extend ) THEN
1389	!
1390	!-- Create a new NetCDF output file
1391	IF ( netcdf_data_format > 1 ) THEN
1392	nc_stat = NF90_CREATE( filename, &
1393	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1394	id_set_pts )
1395	ELSE
1396	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1397	ENDIF
1398	CALL handle_netcdf_error( 'check_open', 395 )
1399	!
1400	!-- Define the header
1401	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1402
1403	ENDIF
1404
1405	CASE ( 201:200+2*max_masks )
1406	!
1407	!-- Set filename depending on unit number
1408	IF ( file_id <= 200+max_masks ) THEN
1409	mid = file_id - 200
1410	WRITE ( mask_char,'(I2.2)') mid
1411	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1412	av = 0
1413	ELSE
1414	mid = file_id - (200+max_masks)
1415	WRITE ( mask_char,'(I2.2)') mid
1416	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1417	coupling_char
1418	av = 1
1419	ENDIF
1420	!
1421	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1422	!-- be opened for extension, if its dimensions and variables match the
1423	!-- actual run.
1424	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1425
1426	IF ( netcdf_extend ) THEN
1427	!
1428	!-- Open an existing NetCDF file for output
1429	#if defined( __netcdf4 )
1430	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1431	COMM = comm2d, INFO = MPI_INFO_NULL )
1432	#else
1433	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1434	#endif
1435	CALL handle_netcdf_error( 'check_open', 456 )
1436	!
1437	!-- Read header information and set all ids. If there is a mismatch
1438	!-- between the previuos and the actual run, netcdf_extend is returned
1439	!-- as .FALSE.
1440	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1441
1442	!
1443	!-- Remove the local file, if it can not be extended
1444	IF ( .NOT. netcdf_extend ) THEN
1445	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1446	CALL handle_netcdf_error( 'check_open', 457 )
1447	CALL local_system('rm ' // TRIM( filename ) )
1448	ENDIF
1449
1450	ENDIF
1451
1452	IF ( .NOT. netcdf_extend ) THEN
1453	!
1454	!-- Create a new NetCDF output file with requested NetCDF format
1455	IF ( netcdf_data_format == 1 ) THEN
1456	!
1457	!-- Classic NetCDF format
1458	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1459	id_set_mask(mid,av) )
1460
1461	ELSEIF ( netcdf_data_format == 2 ) THEN
1462	!
1463	!-- 64bit-offset format
1464	nc_stat = NF90_CREATE( filename, &
1465	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1466	id_set_mask(mid,av) )
1467
1468
1469	#if defined( __netcdf4 )
1470	ELSEIF ( netcdf_data_format == 3 ) THEN
1471	!
1472	!-- NetCDF4/HDF5 format
1473	nc_stat = NF90_CREATE( filename, &
1474	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1475	id_set_mask(mid,av), COMM = comm2d, &
1476	INFO = MPI_INFO_NULL )
1477
1478	ELSEIF ( netcdf_data_format == 4 ) THEN
1479	!
1480	!-- NetCDF4/HDF5 format with classic model flag
1481	nc_stat = NF90_CREATE( filename, &
1482	OR( NF90_NOCLOBBER, &
1483	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1484	id_set_mask(mid,av), COMM = comm2d, &
1485	INFO = MPI_INFO_NULL )
1486	#endif
1487	ENDIF
1488
1489	CALL handle_netcdf_error( 'check_open', 458 )
1490	!
1491	!-- Define the header
1492	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1493
1494	ENDIF
1495
1496
1497	#else
1498
1499	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1500
1501	!
1502	!-- Nothing is done in case of missing netcdf support
1503	RETURN
1504
1505	#endif
1506
1507	CASE DEFAULT
1508
1509	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1510	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1511
1512	END SELECT
1513
1514	!
1515	!-- Set open flag
1516	openfile(file_id)%opened = .TRUE.
1517
1518	!
1519	!-- Formats
1520	3300 FORMAT ('#'/ &
1521	'coord 1 file=',A,' filetype=unformatted'/ &
1522	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1523	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1524	'#')
1525	4000 FORMAT ('# ',A)
1526	5000 FORMAT ('# ',A/ &
1527	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1528	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1529	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1530	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1531	8000 FORMAT (A/ &
1532	' step time # of parts lPE sent/recv rPE sent/recv ',&
1533	'sPE sent/recv nPE sent/recv max # of parts'/ &
1534	103('-'))
1535
1536	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |