Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 623

Last change on this file since 623 was 601, checked in by raasch, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 55.5 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_open.f90 601 2010-11-24 16:42:38Z raasch $
11	!
12	! 600 2010-11-24 16:10:51Z raasch
13	! bugfix in opening of cross section netcdf-files (parallel opening with
14	! netcdf4 only works for netcdf_data_format > 2)
15	!
16	! 564 2010-09-30 13:18:59Z helmke
17	! start number of mask output files changed to 201, netcdf message identifiers
18	! of masked output changed
19	!
20	! 519 2010-03-19 05:30:02Z raasch
21	! NetCDF4 support for particle data
22	!
23	! 493 2010-03-01 08:30:24Z raasch
24	! NetCDF4 support (parallel output)
25	!
26	! 410 2009-12-04 17:05:40Z letzel
27	! masked data output
28	!
29	! 277 2009-03-31 09:13:47Z heinze
30	! Output of NetCDF messages with aid of message handling routine.
31	! Output of messages replaced by message handling routine
32	!
33	! 146 2008-01-17 13:08:34Z raasch
34	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
35	! because only this file contains the global variables,
36	! myid_char_14 removed
37	!
38	! 120 2007-10-17 11:54:43Z raasch
39	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
40	!
41	! 105 2007-08-08 07:12:55Z raasch
42	! Different filenames are used in case of a coupled simulation,
43	! coupling_char added to all relevant filenames
44	!
45	! 82 2007-04-16 15:40:52Z raasch
46	! Call of local_getenv removed, preprocessor directives for old systems removed
47	!
48	! 46 2007-03-05 06:00:47Z raasch
49	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
50	!
51	! RCS Log replace by Id keyword, revision history cleaned up
52	!
53	! Revision 1.44 2006/08/22 13:48:34 raasch
54	! xz and yz cross sections now up to nzt+1
55	!
56	! Revision 1.1 1997/08/11 06:10:55 raasch
57	! Initial revision
58	!
59	!
60	! Description:
61	! ------------
62	! Check if file unit is open. If not, open file and, if necessary, write a
63	! header or start other initializing actions, respectively.
64	!------------------------------------------------------------------------------!
65
66	USE array_kind
67	USE arrays_3d
68	USE control_parameters
69	USE grid_variables
70	USE indices
71	USE netcdf_control
72	USE particle_attributes
73	USE pegrid
74	USE profil_parameter
75	USE statistics
76
77	IMPLICIT NONE
78
79	CHARACTER (LEN=2) :: mask_char, suffix
80	CHARACTER (LEN=20) :: xtext = 'time in s'
81	CHARACTER (LEN=30) :: filename
82	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
83	avs_data_file_localname
84	CHARACTER (LEN=80) :: rtext
85	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
86	batch_scp, zeile
87	CHARACTER (LEN=400) :: command
88
89	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
90	j, k, legpos = 1, timodex = 1
91	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
92
93	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
94	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
95	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
96
97	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
98	sizex = 250.0, sizey = 40.0, texfac = 1.5
99
100	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
101	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
102
103
104	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
105	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
106	rand, rlegfak, sizex, sizey, texfac, &
107	timodex, twoxa, twoya, xtext
108
109
110	!
111	!-- Immediate return if file already open
112	IF ( openfile(file_id)%opened ) RETURN
113
114	!
115	!-- Only certain files are allowed to be re-opened
116	!-- NOTE: some of the other files perhaps also could be re-opened, but it
117	!-- has not been checked so far, if it works!
118	IF ( openfile(file_id)%opened_before ) THEN
119	SELECT CASE ( file_id )
120	CASE ( 13, 14, 21, 22, 23, 80:85 )
121	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
122	message_string = 're-open of unit ' // &
123	'14 is not verified. Please check results!'
124	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
125	ENDIF
126
127	CASE DEFAULT
128	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
129	' is not allowed'
130	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
131
132	RETURN
133
134	END SELECT
135	ENDIF
136
137	!
138	!-- Check if file may be opened on the relevant PE
139	SELECT CASE ( file_id )
140
141	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
142
143	IF ( myid /= 0 ) THEN
144	WRITE( message_string, * ) 'opening file-id ',file_id, &
145	' not allowed for PE ',myid
146	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
147	ENDIF
148
149	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
150
151	IF ( netcdf_data_format < 3 ) THEN
152
153	IF ( myid /= 0 ) THEN
154	WRITE( message_string, * ) 'opening file-id ',file_id, &
155	' not allowed for PE ',myid
156	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
157	ENDIF
158
159	ENDIF
160
161	CASE ( 21, 22, 23 )
162
163	IF ( .NOT. data_output_2d_on_each_pe ) THEN
164	IF ( myid /= 0 ) THEN
165	WRITE( message_string, * ) 'opening file-id ',file_id, &
166	' not allowed for PE ',myid
167	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
168	END IF
169	ENDIF
170
171	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
172
173	!
174	!-- File-ids that are used temporarily in other routines
175	WRITE( message_string, * ) 'opening file-id ',file_id, &
176	' is not allowed since it is used otherwise'
177	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
178
179	END SELECT
180
181	!
182	!-- Open relevant files
183	SELECT CASE ( file_id )
184
185	CASE ( 11 )
186
187	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
188	STATUS='OLD' )
189
190	CASE ( 13 )
191
192	IF ( myid_char == '' ) THEN
193	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
194	FORM='UNFORMATTED', STATUS='OLD' )
195	ELSE
196	!
197	!-- First opening of unit 13 openes file _0000 on all PEs because only
198	!-- this file contains the global variables
199	IF ( .NOT. openfile(file_id)%opened_before ) THEN
200	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
201	FORM='UNFORMATTED', STATUS='OLD' )
202	ELSE
203	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
204	FORM='UNFORMATTED', STATUS='OLD' )
205	ENDIF
206	ENDIF
207
208	CASE ( 14 )
209
210	IF ( myid_char == '' ) THEN
211	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
212	FORM='UNFORMATTED', POSITION='APPEND' )
213	ELSE
214	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
215	CALL local_system( 'mkdir BINOUT' // coupling_char )
216	ENDIF
217	#if defined( __parallel )
218	!
219	!-- Set a barrier in order to allow that all other processors in the
220	!-- directory created by PE0 can open their file
221	CALL MPI_BARRIER( comm2d, ierr )
222	#endif
223	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
224	FORM='UNFORMATTED', POSITION='APPEND' )
225	ENDIF
226
227	CASE ( 15 )
228
229	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
230
231	CASE ( 16 )
232
233	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
234
235	CASE ( 17 )
236
237	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
238
239	CASE ( 18 )
240
241	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
242
243	CASE ( 19 )
244
245	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
246
247	CASE ( 20 )
248
249	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
250	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
251	ENDIF
252	IF ( myid_char == '' ) THEN
253	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
254	FORM='UNFORMATTED', POSITION='APPEND' )
255	ELSE
256	#if defined( __parallel )
257	!
258	!-- Set a barrier in order to allow that all other processors in the
259	!-- directory created by PE0 can open their file
260	CALL MPI_BARRIER( comm2d, ierr )
261	#endif
262	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
263	FORM='UNFORMATTED', POSITION='APPEND' )
264	ENDIF
265
266	CASE ( 21 )
267
268	IF ( data_output_2d_on_each_pe ) THEN
269	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
270	FORM='UNFORMATTED', POSITION='APPEND' )
271	ELSE
272	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
273	FORM='UNFORMATTED', POSITION='APPEND' )
274	ENDIF
275
276	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
277	!
278	!-- Output for combine_plot_fields
279	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
280	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
281	WRITE (21) 0, nx+1, 0, ny+1 ! output part
282	ENDIF
283	!
284	!-- Determine and write ISO2D coordiante header
285	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
286	hu = 0.0
287	ho = (ny+1) * dy
288	DO i = 1, ny
289	eta(i) = REAL( i ) / ( ny + 1.0 )
290	ENDDO
291	eta(0) = 0.0
292	eta(ny+1) = 1.0
293
294	WRITE (21) dx,eta,hu,ho
295	DEALLOCATE( eta, ho, hu )
296
297	!
298	!-- Create output file for local parameters
299	IF ( iso2d_output ) THEN
300	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
301	FORM='FORMATTED', DELIM='APOSTROPHE' )
302	openfile(27)%opened = .TRUE.
303	ENDIF
304
305	ENDIF
306
307	CASE ( 22 )
308
309	IF ( data_output_2d_on_each_pe ) THEN
310	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
311	FORM='UNFORMATTED', POSITION='APPEND' )
312	ELSE
313	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
314	POSITION='APPEND' )
315	ENDIF
316
317	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
318	!
319	!-- Output for combine_plot_fields
320	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
321	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
322	WRITE (22) 0, nx+1, 0, nz+1 ! output part
323	ENDIF
324	!
325	!-- Determine and write ISO2D coordiante header
326	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
327	hu = 0.0
328	ho = zu(nz+1)
329	DO i = 1, nz
330	eta(i) = REAL( zu(i) ) / zu(nz+1)
331	ENDDO
332	eta(0) = 0.0
333	eta(nz+1) = 1.0
334
335	WRITE (22) dx,eta,hu,ho
336	DEALLOCATE( eta, ho, hu )
337	!
338	!-- Create output file for local parameters
339	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
340	FORM='FORMATTED', DELIM='APOSTROPHE' )
341	openfile(28)%opened = .TRUE.
342
343	ENDIF
344
345	CASE ( 23 )
346
347	IF ( data_output_2d_on_each_pe ) THEN
348	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
349	FORM='UNFORMATTED', POSITION='APPEND' )
350	ELSE
351	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
352	POSITION='APPEND' )
353	ENDIF
354
355	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
356	!
357	!-- Output for combine_plot_fields
358	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
359	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
360	WRITE (23) 0, ny+1, 0, nz+1 ! output part
361	ENDIF
362	!
363	!-- Determine and write ISO2D coordiante header
364	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
365	hu = 0.0
366	ho = zu(nz+1)
367	DO i = 1, nz
368	eta(i) = REAL( zu(i) ) / zu(nz+1)
369	ENDDO
370	eta(0) = 0.0
371	eta(nz+1) = 1.0
372
373	WRITE (23) dx,eta,hu,ho
374	DEALLOCATE( eta, ho, hu )
375	!
376	!-- Create output file for local parameters
377	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
378	FORM='FORMATTED', DELIM='APOSTROPHE' )
379	openfile(29)%opened = .TRUE.
380
381	ENDIF
382
383	CASE ( 30 )
384
385	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
386	FORM='UNFORMATTED' )
387	!
388	!-- Write coordinate file for AVS
389	IF ( myid == 0 ) THEN
390	#if defined( __parallel )
391	!
392	!-- Specifications for combine_plot_fields
393	IF ( .NOT. do3d_compress ) THEN
394	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
395	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
396	ENDIF
397	#endif
398	!
399	!-- Write coordinate file for AVS:
400	!-- First determine file names (including cyle numbers) of AVS files on
401	!-- target machine (to which the files are to be transferred).
402	!-- Therefore path information has to be obtained first.
403	IF ( avs_output ) THEN
404	iaddres = LEN_TRIM( return_addres )
405	iusern = LEN_TRIM( return_username )
406
407	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
408	DO WHILE ( .NOT. avs_coor_file_found .OR. &
409	.NOT. avs_data_file_found )
410
411	READ ( 3, '(A)', END=1 ) zeile
412
413	SELECT CASE ( zeile(1:11) )
414
415	CASE ( 'PLOT3D_COOR' )
416	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
417	avs_coor_file_localname
418	avs_coor_file_found = .TRUE.
419
420	CASE ( 'PLOT3D_DATA' )
421	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
422	avs_data_file_localname
423	avs_data_file_found = .TRUE.
424
425	CASE DEFAULT
426	READ ( 3, '(A/A)' ) zeile, zeile
427
428	END SELECT
429
430	ENDDO
431	!
432	!-- Now the cycle numbers on the remote machine must be obtained
433	!-- using batch_scp
434	1 CLOSE ( 3 )
435	IF ( .NOT. avs_coor_file_found .OR. &
436	.NOT. avs_data_file_found ) THEN
437	message_string= 'no filename for AVS-data-file ' // &
438	'found in MRUN-config-file' // &
439	' &filename in FLD-file set to "unknown"'
440	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
441
442	avs_coor_file = 'unknown'
443	avs_data_file = 'unknown'
444	ELSE
445	get_filenames = .TRUE.
446	IF ( TRIM( host ) == 'hpmuk' .OR. &
447	TRIM( host ) == 'lcmuk' ) THEN
448	batch_scp = '/home/raasch/pub/batch_scp'
449	ELSEIF ( TRIM( host ) == 'nech' ) THEN
450	batch_scp = '/ipf/b/b323011/pub/batch_scp'
451	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
452	TRIM( host ) == 'ibmb' ) THEN
453	batch_scp = '/home/h/niksiraa/pub/batch_scp'
454	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
455	batch_scp = '/home/nhbksira/pub/batch_scp'
456	ELSE
457	message_string= 'no path for batch_scp on host "' // &
458	TRIM( host ) // '"'
459	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
460	get_filenames = .FALSE.
461	ENDIF
462
463	IF ( get_filenames ) THEN
464	!
465	!-- Determine the coordinate file name.
466	!-- /etc/passwd serves as Dummy-Datei, because it is not
467	!-- really transferred.
468	command = TRIM( batch_scp ) // ' -n -u ' // &
469	return_username(1:iusern) // ' ' // &
470	return_addres(1:iaddres) // ' /etc/passwd "' // &
471	TRIM( avs_coor_file_catalog ) // '" ' // &
472	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
473
474	CALL local_system( command )
475	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
476	READ ( 3, '(A)' ) avs_coor_file
477	CLOSE ( 3 )
478	!
479	!-- Determine the data file name
480	command = TRIM( batch_scp ) // ' -n -u ' // &
481	return_username(1:iusern) // ' ' // &
482	return_addres(1:iaddres) // ' /etc/passwd "' // &
483	TRIM( avs_data_file_catalog ) // '" ' // &
484	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
485
486	CALL local_system( command )
487	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
488	READ ( 3, '(A)' ) avs_data_file
489	CLOSE ( 3 )
490
491	ELSE
492
493	avs_coor_file = 'unknown'
494	avs_data_file = 'unknown'
495
496	ENDIF
497
498	ENDIF
499
500	!
501	!-- Output of the coordinate file description for FLD-file
502	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
503	openfile(33)%opened = .TRUE.
504	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
505	TRIM( avs_coor_file ), (nx+2)*4, &
506	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
507
508
509	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
510	DO i = 0, nx+1
511	xkoor(i) = i * dx
512	ENDDO
513	DO j = 0, ny+1
514	ykoor(j) = j * dy
515	ENDDO
516	DO k = 0, nz_do3d
517	zkoor(k) = zu(k)
518	ENDDO
519
520	!
521	!-- Create and write on AVS coordinate file
522	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
523	openfile(31)%opened = .TRUE.
524
525	WRITE (31) xkoor, ykoor, zkoor
526	DEALLOCATE( xkoor, ykoor, zkoor )
527
528	!
529	!-- Create FLD file (being written on in close_file)
530	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
531	openfile(32)%opened = .TRUE.
532
533	!
534	!-- Create flag file for compressed 3D output,
535	!-- influences output commands in mrun
536	IF ( do3d_compress ) THEN
537	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
538	WRITE ( 3, '(1X)' )
539	CLOSE ( 3 )
540	ENDIF
541
542	ENDIF
543
544	ENDIF
545
546	!
547	!-- In case of data compression output of the coordinates of the
548	!-- corresponding partial array of a PE only once at the top of the file
549	IF ( avs_output .AND. do3d_compress ) THEN
550	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
551	ENDIF
552
553	CASE ( 40:49 )
554
555	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
556	suffix = ''
557	ELSE
558	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
559	ENDIF
560	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
561	TRIM( suffix ), &
562	FORM='FORMATTED' )
563	!
564	!-- Write contents comments at the top of the file
565	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
566	TRIM( region( file_id - 40 ) )
567
568	CASE ( 50:59 )
569
570	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
571	suffix = ''
572	ELSE
573	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
574	ENDIF
575	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
576	TRIM( suffix ), &
577	FORM='FORMATTED', RECL=496 )
578	!
579	!-- Write PROFIL parameter file for output of time series
580	!-- NOTE: To be on the safe side, this output is done at the beginning of
581	!-- the model run (in case of collapse) and it is repeated in
582	!-- close_file, then, however, with value ranges for the coordinate
583	!-- systems
584	!
585	!-- Firstly determine the number of the coordinate systems to be drawn
586	cranz = 0
587	DO j = 1, 10
588	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
589	ENDDO
590	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
591	TRIM( region( file_id - 50 ) )
592	!
593	!-- Write RAHMEN parameter
594	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
595	TRIM( suffix ), &
596	FORM='FORMATTED', DELIM='APOSTROPHE' )
597	WRITE ( 90, RAHMEN )
598	!
599	!-- Determine and write CROSS parameters for the individual coordinate
600	!-- systems
601	DO j = 1, 10
602	k = cross_ts_number_count(j)
603	IF ( k /= 0 ) THEN
604	!
605	!-- Store curve numbers, colours and line style
606	klist(1:k) = cross_ts_numbers(1:k,j)
607	klist(k+1:10) = 999999
608	cucol(1:k) = linecolors(1:k)
609	lstyle(1:k) = linestyles(1:k)
610	!
611	!-- Write CROSS parameter
612	WRITE ( 90, CROSS )
613
614	ENDIF
615	ENDDO
616
617	CLOSE ( 90 )
618	!
619	!-- Write all labels at the top of the data file, but only during the
620	!-- first run of a sequence of jobs. The following jobs copy the time
621	!-- series data to the bottom of that file.
622	IF ( runnr == 0 ) THEN
623	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
624	' ' // TRIM( region( file_id - 50 ) )
625	ENDIF
626
627
628	CASE ( 80 )
629
630	IF ( myid_char == '' ) THEN
631	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
632	FORM='FORMATTED', POSITION='APPEND' )
633	ELSE
634	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
635	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
636	ENDIF
637	#if defined( __parallel )
638	!
639	!-- Set a barrier in order to allow that thereafter all other
640	!-- processors in the directory created by PE0 can open their file.
641	!-- WARNING: The following barrier will lead to hanging jobs, if
642	!-- check_open is first called from routine
643	!-- allocate_prt_memory!
644	IF ( .NOT. openfile(80)%opened_before ) THEN
645	CALL MPI_BARRIER( comm2d, ierr )
646	ENDIF
647	#endif
648	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
649	myid_char, &
650	FORM='FORMATTED', POSITION='APPEND' )
651	ENDIF
652
653	IF ( .NOT. openfile(80)%opened_before ) THEN
654	WRITE ( 80, 8000 ) TRIM( run_description_header )
655	ENDIF
656
657	CASE ( 81 )
658
659	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
660	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
661
662	CASE ( 82 )
663
664	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
665	POSITION = 'APPEND' )
666
667	CASE ( 83 )
668
669	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
670	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
671
672	CASE ( 84 )
673
674	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
675	POSITION='APPEND' )
676
677	CASE ( 85 )
678
679	IF ( myid_char == '' ) THEN
680	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
681	FORM='UNFORMATTED', POSITION='APPEND' )
682	ELSE
683	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
684	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
685	ENDIF
686	#if defined( __parallel )
687	!
688	!-- Set a barrier in order to allow that thereafter all other
689	!-- processors in the directory created by PE0 can open their file
690	CALL MPI_BARRIER( comm2d, ierr )
691	#endif
692	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
693	myid_char, &
694	FORM='UNFORMATTED', POSITION='APPEND' )
695	ENDIF
696
697	IF ( .NOT. openfile(85)%opened_before ) THEN
698	WRITE ( 85 ) run_description_header
699	!
700	!-- Attention: change version number whenever the output format on
701	!-- unit 85 is changed (see also in routine advec_particles)
702	rtext = 'data format version 3.0'
703	WRITE ( 85 ) rtext
704	WRITE ( 85 ) number_of_particle_groups, &
705	max_number_of_particle_groups
706	WRITE ( 85 ) particle_groups
707	ENDIF
708
709	#if defined( __netcdf )
710	CASE ( 101, 111 )
711	!
712	!-- Set filename depending on unit number
713	IF ( file_id == 101 ) THEN
714	filename = 'DATA_2D_XY_NETCDF' // coupling_char
715	av = 0
716	ELSE
717	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
718	av = 1
719	ENDIF
720	!
721	!-- Inquire, if there is a NetCDF file from a previuos run. This should
722	!-- be opened for extension, if its dimensions and variables match the
723	!-- actual run.
724	INQUIRE( FILE=filename, EXIST=netcdf_extend )
725
726	IF ( netcdf_extend ) THEN
727	!
728	!-- Open an existing NetCDF file for output
729	IF ( netcdf_data_format < 3 ) THEN
730	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
731	ELSE
732	#if defined( __netcdf4 )
733	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
734	COMM = comm2d, INFO = MPI_INFO_NULL )
735	#endif
736	ENDIF
737
738	CALL handle_netcdf_error( 'check_open', 20 )
739	!
740	!-- Read header information and set all ids. If there is a mismatch
741	!-- between the previuos and the actual run, netcdf_extend is returned
742	!-- as .FALSE.
743	CALL define_netcdf_header( 'xy', netcdf_extend, av )
744
745	!
746	!-- Remove the local file, if it can not be extended
747	IF ( .NOT. netcdf_extend ) THEN
748	nc_stat = NF90_CLOSE( id_set_xy(av) )
749	CALL handle_netcdf_error( 'check_open', 21 )
750	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
751	ENDIF
752
753	ENDIF
754
755	IF ( .NOT. netcdf_extend ) THEN
756	!
757	!-- Create a new NetCDF output file with requested NetCDF format
758	IF ( netcdf_data_format == 1 ) THEN
759	!
760	!-- Classic NetCDF format
761	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
762
763	ELSEIF ( netcdf_data_format == 2 ) THEN
764	!
765	!-- 64bit-offset format
766	nc_stat = NF90_CREATE( filename, &
767	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
768	id_set_xy(av) )
769
770	#if defined( __netcdf4 )
771	ELSEIF ( netcdf_data_format == 3 ) THEN
772	!
773	!-- NetCDF4/HDF5 format
774	nc_stat = NF90_CREATE( filename, &
775	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
776	id_set_xy(av), COMM = comm2d, &
777	INFO = MPI_INFO_NULL )
778
779	ELSEIF ( netcdf_data_format == 4 ) THEN
780	!
781	!-- NetCDF4/HDF5 format with classic model flag
782	nc_stat = NF90_CREATE( filename, &
783	OR( NF90_NOCLOBBER, &
784	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
785	id_set_xy(av), COMM = comm2d, &
786	INFO = MPI_INFO_NULL )
787	#endif
788	ENDIF
789
790	CALL handle_netcdf_error( 'check_open', 22 )
791
792	!
793	!-- Define the header
794	CALL define_netcdf_header( 'xy', netcdf_extend, av )
795
796	!
797	!-- In case of parallel NetCDF output, create flag file which tells
798	!-- combine_plot_fields that nothing is to do.
799	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
800	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
801	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
802	CLOSE( 99 )
803	ENDIF
804
805	ENDIF
806
807	CASE ( 102, 112 )
808	!
809	!-- Set filename depending on unit number
810	IF ( file_id == 102 ) THEN
811	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
812	av = 0
813	ELSE
814	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
815	av = 1
816	ENDIF
817	!
818	!-- Inquire, if there is a NetCDF file from a previuos run. This should
819	!-- be opened for extension, if its dimensions and variables match the
820	!-- actual run.
821	INQUIRE( FILE=filename, EXIST=netcdf_extend )
822
823	IF ( netcdf_extend ) THEN
824	!
825	!-- Open an existing NetCDF file for output
826	IF ( netcdf_data_format < 3 ) THEN
827	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
828	ELSE
829	#if defined( __netcdf4 )
830	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
831	COMM = comm2d, INFO = MPI_INFO_NULL )
832	#endif
833	ENDIF
834
835	CALL handle_netcdf_error( 'check_open', 23 )
836	!
837	!-- Read header information and set all ids. If there is a mismatch
838	!-- between the previuos and the actual run, netcdf_extend is returned
839	!-- as .FALSE.
840	CALL define_netcdf_header( 'xz', netcdf_extend, av )
841
842	!
843	!-- Remove the local file, if it can not be extended
844	IF ( .NOT. netcdf_extend ) THEN
845	nc_stat = NF90_CLOSE( id_set_xz(av) )
846	CALL handle_netcdf_error( 'check_open', 24 )
847	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
848	ENDIF
849
850	ENDIF
851
852	IF ( .NOT. netcdf_extend ) THEN
853	!
854	!-- Create a new NetCDF output file with requested NetCDF format
855	IF ( netcdf_data_format == 1 ) THEN
856	!
857	!-- Classic NetCDF format
858	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
859
860	ELSEIF ( netcdf_data_format == 2 ) THEN
861	!
862	!-- 64bit-offset format
863	nc_stat = NF90_CREATE( filename, &
864	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
865	id_set_xz(av) )
866
867	#if defined( __netcdf4 )
868	ELSEIF ( netcdf_data_format == 3 ) THEN
869	!
870	!-- NetCDF4/HDF5 format
871	nc_stat = NF90_CREATE( filename, &
872	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
873	id_set_xz(av), COMM = comm2d, &
874	INFO = MPI_INFO_NULL )
875
876	ELSEIF ( netcdf_data_format == 4 ) THEN
877	!
878	!-- NetCDF4/HDF5 format with classic model flag
879	nc_stat = NF90_CREATE( filename, &
880	OR( NF90_NOCLOBBER, &
881	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
882	id_set_xz(av), COMM = comm2d, &
883	INFO = MPI_INFO_NULL )
884	#endif
885	ENDIF
886
887	CALL handle_netcdf_error( 'check_open', 25 )
888
889	!
890	!-- Define the header
891	CALL define_netcdf_header( 'xz', netcdf_extend, av )
892
893	!
894	!-- In case of parallel NetCDF output, create flag file which tells
895	!-- combine_plot_fields that nothing is to do.
896	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
897	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
898	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
899	CLOSE( 99 )
900	ENDIF
901
902	ENDIF
903
904	CASE ( 103, 113 )
905	!
906	!-- Set filename depending on unit number
907	IF ( file_id == 103 ) THEN
908	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
909	av = 0
910	ELSE
911	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
912	av = 1
913	ENDIF
914	!
915	!-- Inquire, if there is a NetCDF file from a previuos run. This should
916	!-- be opened for extension, if its dimensions and variables match the
917	!-- actual run.
918	INQUIRE( FILE=filename, EXIST=netcdf_extend )
919
920	IF ( netcdf_extend ) THEN
921	!
922	!-- Open an existing NetCDF file for output
923	IF ( netcdf_data_format < 3 ) THEN
924	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
925	ELSE
926	#if defined( __netcdf4 )
927	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
928	COMM = comm2d, INFO = MPI_INFO_NULL )
929	#endif
930	ENDIF
931
932	CALL handle_netcdf_error( 'check_open', 26 )
933	!
934	!-- Read header information and set all ids. If there is a mismatch
935	!-- between the previuos and the actual run, netcdf_extend is returned
936	!-- as .FALSE.
937	CALL define_netcdf_header( 'yz', netcdf_extend, av )
938
939	!
940	!-- Remove the local file, if it can not be extended
941	IF ( .NOT. netcdf_extend ) THEN
942	nc_stat = NF90_CLOSE( id_set_yz(av) )
943	CALL handle_netcdf_error( 'check_open', 27 )
944	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
945	ENDIF
946
947	ENDIF
948
949	IF ( .NOT. netcdf_extend ) THEN
950	!
951	!-- Create a new NetCDF output file with requested NetCDF format
952	IF ( netcdf_data_format == 1 ) THEN
953	!
954	!-- Classic NetCDF format
955	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
956
957	ELSEIF ( netcdf_data_format == 2 ) THEN
958	!
959	!-- 64bit-offset format
960	nc_stat = NF90_CREATE( filename, &
961	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
962	id_set_yz(av) )
963
964	#if defined( __netcdf4 )
965	ELSEIF ( netcdf_data_format == 3 ) THEN
966	!
967	!-- NetCDF4/HDF5 format
968	nc_stat = NF90_CREATE( filename, &
969	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
970	id_set_yz(av), COMM = comm2d, &
971	INFO = MPI_INFO_NULL )
972
973	ELSEIF ( netcdf_data_format == 4 ) THEN
974	!
975	!-- NetCDF4/HDF5 format with classic model flag
976	nc_stat = NF90_CREATE( filename, &
977	OR( NF90_NOCLOBBER, &
978	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
979	id_set_yz(av), COMM = comm2d, &
980	INFO = MPI_INFO_NULL )
981	#endif
982	ENDIF
983
984	CALL handle_netcdf_error( 'check_open', 28 )
985
986	!
987	!-- Define the header
988	CALL define_netcdf_header( 'yz', netcdf_extend, av )
989
990	!
991	!-- In case of parallel NetCDF output, create flag file which tells
992	!-- combine_plot_fields that nothing is to do.
993	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
994	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
995	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
996	CLOSE( 99 )
997	ENDIF
998
999	ENDIF
1000
1001	CASE ( 104 )
1002	!
1003	!-- Set filename
1004	filename = 'DATA_1D_PR_NETCDF' // coupling_char
1005
1006	!
1007	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1008	!-- be opened for extension, if its variables match the actual run.
1009	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1010
1011	IF ( netcdf_extend ) THEN
1012	!
1013	!-- Open an existing NetCDF file for output
1014	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
1015	CALL handle_netcdf_error( 'check_open', 29 )
1016	!
1017	!-- Read header information and set all ids. If there is a mismatch
1018	!-- between the previuos and the actual run, netcdf_extend is returned
1019	!-- as .FALSE.
1020	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1021
1022	!
1023	!-- Remove the local file, if it can not be extended
1024	IF ( .NOT. netcdf_extend ) THEN
1025	nc_stat = NF90_CLOSE( id_set_pr )
1026	CALL handle_netcdf_error( 'check_open', 30 )
1027	CALL local_system( 'rm ' // TRIM( filename ) )
1028	ENDIF
1029
1030	ENDIF
1031
1032	IF ( .NOT. netcdf_extend ) THEN
1033	!
1034	!-- Create a new NetCDF output file
1035	IF ( netcdf_data_format > 1 ) THEN
1036	nc_stat = NF90_CREATE( filename, &
1037	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1038	id_set_pr )
1039	ELSE
1040	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1041	ENDIF
1042	CALL handle_netcdf_error( 'check_open', 31 )
1043	!
1044	!-- Define the header
1045	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1046
1047	ENDIF
1048
1049	CASE ( 105 )
1050	!
1051	!-- Set filename
1052	filename = 'DATA_1D_TS_NETCDF' // coupling_char
1053
1054	!
1055	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1056	!-- be opened for extension, if its variables match the actual run.
1057	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1058
1059	IF ( netcdf_extend ) THEN
1060	!
1061	!-- Open an existing NetCDF file for output
1062	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1063	CALL handle_netcdf_error( 'check_open', 32 )
1064	!
1065	!-- Read header information and set all ids. If there is a mismatch
1066	!-- between the previuos and the actual run, netcdf_extend is returned
1067	!-- as .FALSE.
1068	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1069
1070	!
1071	!-- Remove the local file, if it can not be extended
1072	IF ( .NOT. netcdf_extend ) THEN
1073	nc_stat = NF90_CLOSE( id_set_ts )
1074	CALL handle_netcdf_error( 'check_open', 33 )
1075	CALL local_system( 'rm ' // TRIM( filename ) )
1076	ENDIF
1077
1078	ENDIF
1079
1080	IF ( .NOT. netcdf_extend ) THEN
1081	!
1082	!-- Create a new NetCDF output file
1083	IF ( netcdf_data_format > 1 ) THEN
1084	nc_stat = NF90_CREATE( filename, &
1085	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1086	id_set_ts )
1087	ELSE
1088	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1089	ENDIF
1090	CALL handle_netcdf_error( 'check_open', 34 )
1091	!
1092	!-- Define the header
1093	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1094
1095	ENDIF
1096
1097
1098	CASE ( 106, 116 )
1099	!
1100	!-- Set filename depending on unit number
1101	IF ( file_id == 106 ) THEN
1102	filename = 'DATA_3D_NETCDF' // coupling_char
1103	av = 0
1104	ELSE
1105	filename = 'DATA_3D_AV_NETCDF' // coupling_char
1106	av = 1
1107	ENDIF
1108	!
1109	!-- Inquire, if there is a NetCDF file from a previous run. This should
1110	!-- be opened for extension, if its dimensions and variables match the
1111	!-- actual run.
1112	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1113
1114	IF ( netcdf_extend ) THEN
1115	!
1116	!-- Open an existing NetCDF file for output
1117	#if defined( __netcdf4 )
1118	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1119	COMM = comm2d, INFO = MPI_INFO_NULL )
1120	#else
1121	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1122	#endif
1123	CALL handle_netcdf_error( 'check_open', 35 )
1124	!
1125	!-- Read header information and set all ids. If there is a mismatch
1126	!-- between the previuos and the actual run, netcdf_extend is returned
1127	!-- as .FALSE.
1128	CALL define_netcdf_header( '3d', netcdf_extend, av )
1129
1130	!
1131	!-- Remove the local file, if it can not be extended
1132	IF ( .NOT. netcdf_extend ) THEN
1133	nc_stat = NF90_CLOSE( id_set_3d(av) )
1134	CALL handle_netcdf_error( 'check_open', 36 )
1135	CALL local_system('rm ' // TRIM( filename ) )
1136	ENDIF
1137
1138	ENDIF
1139
1140	IF ( .NOT. netcdf_extend ) THEN
1141	!
1142	!-- Create a new NetCDF output file with requested NetCDF format
1143	IF ( netcdf_data_format == 1 ) THEN
1144	!
1145	!-- Classic NetCDF format
1146	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1147
1148	ELSEIF ( netcdf_data_format == 2 ) THEN
1149	!
1150	!-- 64bit-offset format
1151	nc_stat = NF90_CREATE( filename, &
1152	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1153	id_set_3d(av) )
1154
1155	#if defined( __netcdf4 )
1156	ELSEIF ( netcdf_data_format == 3 ) THEN
1157	!
1158	!-- NetCDF4/HDF5 format
1159	nc_stat = NF90_CREATE( filename, &
1160	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1161	id_set_3d(av), COMM = comm2d, &
1162	INFO = MPI_INFO_NULL )
1163
1164	ELSEIF ( netcdf_data_format == 4 ) THEN
1165	!
1166	!-- NetCDF4/HDF5 format with classic model flag
1167	nc_stat = NF90_CREATE( filename, &
1168	OR( NF90_NOCLOBBER, &
1169	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1170	id_set_3d(av), COMM = comm2d, &
1171	INFO = MPI_INFO_NULL )
1172	#endif
1173	ENDIF
1174
1175	CALL handle_netcdf_error( 'check_open', 37 )
1176
1177	!
1178	!-- Define the header
1179	CALL define_netcdf_header( '3d', netcdf_extend, av )
1180
1181	!
1182	!-- In case of parallel NetCDF output, create flag file which tells
1183	!-- combine_plot_fields that nothing is to do.
1184	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1185	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1186	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1187	CLOSE( 99 )
1188	ENDIF
1189
1190	ENDIF
1191
1192
1193	CASE ( 107 )
1194	!
1195	!-- Set filename
1196	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1197
1198	!
1199	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1200	!-- be opened for extension, if its variables match the actual run.
1201	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1202
1203	IF ( netcdf_extend ) THEN
1204	!
1205	!-- Open an existing NetCDF file for output
1206	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1207	CALL handle_netcdf_error( 'check_open', 38 )
1208
1209	!
1210	!-- Read header information and set all ids. If there is a mismatch
1211	!-- between the previuos and the actual run, netcdf_extend is returned
1212	!-- as .FALSE.
1213	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1214
1215	!
1216	!-- Remove the local file, if it can not be extended
1217	IF ( .NOT. netcdf_extend ) THEN
1218	nc_stat = NF90_CLOSE( id_set_sp )
1219	CALL handle_netcdf_error( 'check_open', 39 )
1220	CALL local_system( 'rm ' // TRIM( filename ) )
1221	ENDIF
1222
1223	ENDIF
1224
1225	IF ( .NOT. netcdf_extend ) THEN
1226	!
1227	!-- Create a new NetCDF output file
1228	IF ( netcdf_data_format > 1 ) THEN
1229	nc_stat = NF90_CREATE( filename, &
1230	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1231	id_set_sp )
1232	ELSE
1233	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1234	ENDIF
1235	CALL handle_netcdf_error( 'check_open', 40 )
1236	!
1237	!-- Define the header
1238	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1239
1240	ENDIF
1241
1242
1243	CASE ( 108 )
1244
1245	IF ( myid_char == '' ) THEN
1246	filename = 'DATA_PRT_NETCDF' // coupling_char
1247	ELSE
1248	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1249	myid_char
1250	ENDIF
1251	!
1252	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1253	!-- be opened for extension, if its variables match the actual run.
1254	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1255
1256	IF ( netcdf_extend ) THEN
1257	!
1258	!-- Open an existing NetCDF file for output
1259	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1260	CALL handle_netcdf_error( 'check_open', 41 )
1261	!
1262	!-- Read header information and set all ids. If there is a mismatch
1263	!-- between the previuos and the actual run, netcdf_extend is returned
1264	!-- as .FALSE.
1265	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1266
1267	!
1268	!-- Remove the local file, if it can not be extended
1269	IF ( .NOT. netcdf_extend ) THEN
1270	nc_stat = NF90_CLOSE( id_set_prt )
1271	CALL handle_netcdf_error( 'check_open', 42 )
1272	CALL local_system( 'rm ' // filename )
1273	ENDIF
1274
1275	ENDIF
1276
1277	IF ( .NOT. netcdf_extend ) THEN
1278
1279	!
1280	!-- For runs on multiple processors create the subdirectory
1281	IF ( myid_char /= '' ) THEN
1282	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1283	THEN ! needs modification in case of non-extendable sets
1284	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1285	TRIM( coupling_char ) // '/' )
1286	ENDIF
1287	#if defined( __parallel )
1288	!
1289	!-- Set a barrier in order to allow that all other processors in the
1290	!-- directory created by PE0 can open their file
1291	CALL MPI_BARRIER( comm2d, ierr )
1292	#endif
1293	ENDIF
1294
1295	!
1296	!-- Create a new NetCDF output file with requested NetCDF format
1297	IF ( netcdf_data_format == 1 ) THEN
1298	!
1299	!-- Classic NetCDF format
1300	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1301
1302	ELSEIF ( netcdf_data_format == 2 ) THEN
1303	!
1304	!-- 64bit-offset format
1305	nc_stat = NF90_CREATE( filename, &
1306	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1307	id_set_prt )
1308
1309	#if defined( __netcdf4 )
1310	ELSEIF ( netcdf_data_format == 3 ) THEN
1311	!
1312	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
1313	nc_stat = NF90_CREATE( filename, &
1314	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1315	id_set_prt )
1316
1317	ELSEIF ( netcdf_data_format == 4 ) THEN
1318	!
1319	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
1320	!-- output into a single file!
1321	nc_stat = NF90_CREATE( filename, &
1322	OR( NF90_NOCLOBBER, &
1323	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1324	id_set_prt )
1325	#endif
1326	ENDIF
1327
1328	CALL handle_netcdf_error( 'check_open', 43 )
1329
1330	!
1331	!-- Define the header
1332	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1333
1334	ENDIF
1335
1336	CASE ( 109 )
1337	!
1338	!-- Set filename
1339	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1340
1341	!
1342	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1343	!-- be opened for extension, if its variables match the actual run.
1344	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1345
1346	IF ( netcdf_extend ) THEN
1347	!
1348	!-- Open an existing NetCDF file for output
1349	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1350	CALL handle_netcdf_error( 'check_open', 393 )
1351	!
1352	!-- Read header information and set all ids. If there is a mismatch
1353	!-- between the previuos and the actual run, netcdf_extend is returned
1354	!-- as .FALSE.
1355	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1356
1357	!
1358	!-- Remove the local file, if it can not be extended
1359	IF ( .NOT. netcdf_extend ) THEN
1360	nc_stat = NF90_CLOSE( id_set_pts )
1361	CALL handle_netcdf_error( 'check_open', 394 )
1362	CALL local_system( 'rm ' // TRIM( filename ) )
1363	ENDIF
1364
1365	ENDIF
1366
1367	IF ( .NOT. netcdf_extend ) THEN
1368	!
1369	!-- Create a new NetCDF output file
1370	IF ( netcdf_data_format > 1 ) THEN
1371	nc_stat = NF90_CREATE( filename, &
1372	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1373	id_set_pts )
1374	ELSE
1375	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1376	ENDIF
1377	CALL handle_netcdf_error( 'check_open', 395 )
1378	!
1379	!-- Define the header
1380	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1381
1382	ENDIF
1383
1384	CASE ( 201:200+2*max_masks )
1385	!
1386	!-- Set filename depending on unit number
1387	IF ( file_id <= 200+max_masks ) THEN
1388	mid = file_id - 200
1389	WRITE ( mask_char,'(I2.2)') mid
1390	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1391	av = 0
1392	ELSE
1393	mid = file_id - (200+max_masks)
1394	WRITE ( mask_char,'(I2.2)') mid
1395	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1396	coupling_char
1397	av = 1
1398	ENDIF
1399	!
1400	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1401	!-- be opened for extension, if its dimensions and variables match the
1402	!-- actual run.
1403	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1404
1405	IF ( netcdf_extend ) THEN
1406	!
1407	!-- Open an existing NetCDF file for output
1408	#if defined( __netcdf4 )
1409	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1410	COMM = comm2d, INFO = MPI_INFO_NULL )
1411	#else
1412	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1413	#endif
1414	CALL handle_netcdf_error( 'check_open', 456 )
1415	!
1416	!-- Read header information and set all ids. If there is a mismatch
1417	!-- between the previuos and the actual run, netcdf_extend is returned
1418	!-- as .FALSE.
1419	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1420
1421	!
1422	!-- Remove the local file, if it can not be extended
1423	IF ( .NOT. netcdf_extend ) THEN
1424	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1425	CALL handle_netcdf_error( 'check_open', 457 )
1426	CALL local_system('rm ' // TRIM( filename ) )
1427	ENDIF
1428
1429	ENDIF
1430
1431	IF ( .NOT. netcdf_extend ) THEN
1432	!
1433	!-- Create a new NetCDF output file with requested NetCDF format
1434	IF ( netcdf_data_format == 1 ) THEN
1435	!
1436	!-- Classic NetCDF format
1437	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1438	id_set_mask(mid,av) )
1439
1440	ELSEIF ( netcdf_data_format == 2 ) THEN
1441	!
1442	!-- 64bit-offset format
1443	nc_stat = NF90_CREATE( filename, &
1444	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1445	id_set_mask(mid,av) )
1446
1447
1448	#if defined( __netcdf4 )
1449	ELSEIF ( netcdf_data_format == 3 ) THEN
1450	!
1451	!-- NetCDF4/HDF5 format
1452	nc_stat = NF90_CREATE( filename, &
1453	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1454	id_set_mask(mid,av), COMM = comm2d, &
1455	INFO = MPI_INFO_NULL )
1456
1457	ELSEIF ( netcdf_data_format == 4 ) THEN
1458	!
1459	!-- NetCDF4/HDF5 format with classic model flag
1460	nc_stat = NF90_CREATE( filename, &
1461	OR( NF90_NOCLOBBER, &
1462	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1463	id_set_mask(mid,av), COMM = comm2d, &
1464	INFO = MPI_INFO_NULL )
1465	#endif
1466	ENDIF
1467
1468	CALL handle_netcdf_error( 'check_open', 458 )
1469	!
1470	!-- Define the header
1471	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1472
1473	ENDIF
1474
1475
1476	#else
1477
1478	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1479
1480	!
1481	!-- Nothing is done in case of missing netcdf support
1482	RETURN
1483
1484	#endif
1485
1486	CASE DEFAULT
1487
1488	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1489	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1490
1491	END SELECT
1492
1493	!
1494	!-- Set open flag
1495	openfile(file_id)%opened = .TRUE.
1496
1497	!
1498	!-- Formats
1499	3300 FORMAT ('#'/ &
1500	'coord 1 file=',A,' filetype=unformatted'/ &
1501	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1502	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1503	'#')
1504	4000 FORMAT ('# ',A)
1505	5000 FORMAT ('# ',A/ &
1506	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1507	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1508	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1509	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1510	8000 FORMAT (A/ &
1511	' step time # of parts lPE sent/recv rPE sent/recv ',&
1512	'sPE sent/recv nPE sent/recv max # of parts'/ &
1513	103('-'))
1514
1515	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |