Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 559

Last change on this file since 559 was 520, checked in by raasch, 15 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 54.9 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_open.f90 520 2010-03-19 05:39:46Z weinreis $
11	!
12	! 519 2010-03-19 05:30:02Z raasch
13	! NetCDF4 support for particle data
14	!
15	! 493 2010-03-01 08:30:24Z raasch
16	! NetCDF4 support (parallel output)
17	!
18	! 410 2009-12-04 17:05:40Z letzel
19	! masked data output
20	!
21	! 277 2009-03-31 09:13:47Z heinze
22	! Output of NetCDF messages with aid of message handling routine.
23	! Output of messages replaced by message handling routine
24	!
25	! 146 2008-01-17 13:08:34Z raasch
26	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
27	! because only this file contains the global variables,
28	! myid_char_14 removed
29	!
30	! 120 2007-10-17 11:54:43Z raasch
31	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
32	!
33	! 105 2007-08-08 07:12:55Z raasch
34	! Different filenames are used in case of a coupled simulation,
35	! coupling_char added to all relevant filenames
36	!
37	! 82 2007-04-16 15:40:52Z raasch
38	! Call of local_getenv removed, preprocessor directives for old systems removed
39	!
40	! 46 2007-03-05 06:00:47Z raasch
41	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
42	!
43	! RCS Log replace by Id keyword, revision history cleaned up
44	!
45	! Revision 1.44 2006/08/22 13:48:34 raasch
46	! xz and yz cross sections now up to nzt+1
47	!
48	! Revision 1.1 1997/08/11 06:10:55 raasch
49	! Initial revision
50	!
51	!
52	! Description:
53	! ------------
54	! Check if file unit is open. If not, open file and, if necessary, write a
55	! header or start other initializing actions, respectively.
56	!------------------------------------------------------------------------------!
57
58	USE array_kind
59	USE arrays_3d
60	USE control_parameters
61	USE grid_variables
62	USE indices
63	USE netcdf_control
64	USE particle_attributes
65	USE pegrid
66	USE profil_parameter
67	USE statistics
68
69	IMPLICIT NONE
70
71	CHARACTER (LEN=2) :: mask_char, suffix
72	CHARACTER (LEN=20) :: xtext = 'time in s'
73	CHARACTER (LEN=30) :: filename
74	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
75	avs_data_file_localname
76	CHARACTER (LEN=80) :: rtext
77	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
78	batch_scp, zeile
79	CHARACTER (LEN=400) :: command
80
81	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
82	j, k, legpos = 1, timodex = 1
83	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
84
85	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
86	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
87	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
88
89	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
90	sizex = 250.0, sizey = 40.0, texfac = 1.5
91
92	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
93	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
94
95
96	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
97	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
98	rand, rlegfak, sizex, sizey, texfac, &
99	timodex, twoxa, twoya, xtext
100
101
102	!
103	!-- Immediate return if file already open
104	IF ( openfile(file_id)%opened ) RETURN
105
106	!
107	!-- Only certain files are allowed to be re-opened
108	!-- NOTE: some of the other files perhaps also could be re-opened, but it
109	!-- has not been checked so far, if it works!
110	IF ( openfile(file_id)%opened_before ) THEN
111	SELECT CASE ( file_id )
112	CASE ( 13, 14, 21, 22, 23, 80:85 )
113	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
114	message_string = 're-open of unit ' // &
115	'14 is not verified. Please check results!'
116	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
117	ENDIF
118
119	CASE DEFAULT
120	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
121	' is not allowed'
122	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
123
124	RETURN
125
126	END SELECT
127	ENDIF
128
129	!
130	!-- Check if file may be opened on the relevant PE
131	SELECT CASE ( file_id )
132
133	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 104:105, 107, 109 )
134
135	IF ( myid /= 0 ) THEN
136	WRITE( message_string, * ) 'opening file-id ',file_id, &
137	' not allowed for PE ',myid
138	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
139	ENDIF
140
141	CASE ( 101:103, 106, 111:113, 116, 121:160 )
142
143	IF ( netcdf_data_format < 3 ) THEN
144
145	IF ( myid /= 0 ) THEN
146	WRITE( message_string, * ) 'opening file-id ',file_id, &
147	' not allowed for PE ',myid
148	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
149	ENDIF
150
151	ENDIF
152
153	CASE ( 21, 22, 23 )
154
155	IF ( .NOT. data_output_2d_on_each_pe ) THEN
156	IF ( myid /= 0 ) THEN
157	WRITE( message_string, * ) 'opening file-id ',file_id, &
158	' not allowed for PE ',myid
159	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
160	END IF
161	ENDIF
162
163	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
164
165	!
166	!-- File-ids that are used temporarily in other routines
167	WRITE( message_string, * ) 'opening file-id ',file_id, &
168	' is not allowed since it is used otherwise'
169	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
170
171	END SELECT
172
173	!
174	!-- Open relevant files
175	SELECT CASE ( file_id )
176
177	CASE ( 11 )
178
179	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
180	STATUS='OLD' )
181
182	CASE ( 13 )
183
184	IF ( myid_char == '' ) THEN
185	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
186	FORM='UNFORMATTED', STATUS='OLD' )
187	ELSE
188	!
189	!-- First opening of unit 13 openes file _0000 on all PEs because only
190	!-- this file contains the global variables
191	IF ( .NOT. openfile(file_id)%opened_before ) THEN
192	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
193	FORM='UNFORMATTED', STATUS='OLD' )
194	ELSE
195	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
196	FORM='UNFORMATTED', STATUS='OLD' )
197	ENDIF
198	ENDIF
199
200	CASE ( 14 )
201
202	IF ( myid_char == '' ) THEN
203	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
204	FORM='UNFORMATTED', POSITION='APPEND' )
205	ELSE
206	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
207	CALL local_system( 'mkdir BINOUT' // coupling_char )
208	ENDIF
209	#if defined( __parallel )
210	!
211	!-- Set a barrier in order to allow that all other processors in the
212	!-- directory created by PE0 can open their file
213	CALL MPI_BARRIER( comm2d, ierr )
214	#endif
215	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
216	FORM='UNFORMATTED', POSITION='APPEND' )
217	ENDIF
218
219	CASE ( 15 )
220
221	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
222
223	CASE ( 16 )
224
225	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
226
227	CASE ( 17 )
228
229	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
230
231	CASE ( 18 )
232
233	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
234
235	CASE ( 19 )
236
237	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
238
239	CASE ( 20 )
240
241	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
242	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
243	ENDIF
244	IF ( myid_char == '' ) THEN
245	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
246	FORM='UNFORMATTED', POSITION='APPEND' )
247	ELSE
248	#if defined( __parallel )
249	!
250	!-- Set a barrier in order to allow that all other processors in the
251	!-- directory created by PE0 can open their file
252	CALL MPI_BARRIER( comm2d, ierr )
253	#endif
254	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
255	FORM='UNFORMATTED', POSITION='APPEND' )
256	ENDIF
257
258	CASE ( 21 )
259
260	IF ( data_output_2d_on_each_pe ) THEN
261	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
262	FORM='UNFORMATTED', POSITION='APPEND' )
263	ELSE
264	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
265	FORM='UNFORMATTED', POSITION='APPEND' )
266	ENDIF
267
268	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
269	!
270	!-- Output for combine_plot_fields
271	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
272	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
273	WRITE (21) 0, nx+1, 0, ny+1 ! output part
274	ENDIF
275	!
276	!-- Determine and write ISO2D coordiante header
277	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
278	hu = 0.0
279	ho = (ny+1) * dy
280	DO i = 1, ny
281	eta(i) = REAL( i ) / ( ny + 1.0 )
282	ENDDO
283	eta(0) = 0.0
284	eta(ny+1) = 1.0
285
286	WRITE (21) dx,eta,hu,ho
287	DEALLOCATE( eta, ho, hu )
288
289	!
290	!-- Create output file for local parameters
291	IF ( iso2d_output ) THEN
292	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
293	FORM='FORMATTED', DELIM='APOSTROPHE' )
294	openfile(27)%opened = .TRUE.
295	ENDIF
296
297	ENDIF
298
299	CASE ( 22 )
300
301	IF ( data_output_2d_on_each_pe ) THEN
302	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
303	FORM='UNFORMATTED', POSITION='APPEND' )
304	ELSE
305	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
306	POSITION='APPEND' )
307	ENDIF
308
309	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
310	!
311	!-- Output for combine_plot_fields
312	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
313	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
314	WRITE (22) 0, nx+1, 0, nz+1 ! output part
315	ENDIF
316	!
317	!-- Determine and write ISO2D coordiante header
318	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
319	hu = 0.0
320	ho = zu(nz+1)
321	DO i = 1, nz
322	eta(i) = REAL( zu(i) ) / zu(nz+1)
323	ENDDO
324	eta(0) = 0.0
325	eta(nz+1) = 1.0
326
327	WRITE (22) dx,eta,hu,ho
328	DEALLOCATE( eta, ho, hu )
329	!
330	!-- Create output file for local parameters
331	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
332	FORM='FORMATTED', DELIM='APOSTROPHE' )
333	openfile(28)%opened = .TRUE.
334
335	ENDIF
336
337	CASE ( 23 )
338
339	IF ( data_output_2d_on_each_pe ) THEN
340	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
341	FORM='UNFORMATTED', POSITION='APPEND' )
342	ELSE
343	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
344	POSITION='APPEND' )
345	ENDIF
346
347	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
348	!
349	!-- Output for combine_plot_fields
350	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
351	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
352	WRITE (23) 0, ny+1, 0, nz+1 ! output part
353	ENDIF
354	!
355	!-- Determine and write ISO2D coordiante header
356	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
357	hu = 0.0
358	ho = zu(nz+1)
359	DO i = 1, nz
360	eta(i) = REAL( zu(i) ) / zu(nz+1)
361	ENDDO
362	eta(0) = 0.0
363	eta(nz+1) = 1.0
364
365	WRITE (23) dx,eta,hu,ho
366	DEALLOCATE( eta, ho, hu )
367	!
368	!-- Create output file for local parameters
369	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
370	FORM='FORMATTED', DELIM='APOSTROPHE' )
371	openfile(29)%opened = .TRUE.
372
373	ENDIF
374
375	CASE ( 30 )
376
377	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
378	FORM='UNFORMATTED' )
379	!
380	!-- Write coordinate file for AVS
381	IF ( myid == 0 ) THEN
382	#if defined( __parallel )
383	!
384	!-- Specifications for combine_plot_fields
385	IF ( .NOT. do3d_compress ) THEN
386	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
387	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
388	ENDIF
389	#endif
390	!
391	!-- Write coordinate file for AVS:
392	!-- First determine file names (including cyle numbers) of AVS files on
393	!-- target machine (to which the files are to be transferred).
394	!-- Therefore path information has to be obtained first.
395	IF ( avs_output ) THEN
396	iaddres = LEN_TRIM( return_addres )
397	iusern = LEN_TRIM( return_username )
398
399	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
400	DO WHILE ( .NOT. avs_coor_file_found .OR. &
401	.NOT. avs_data_file_found )
402
403	READ ( 3, '(A)', END=1 ) zeile
404
405	SELECT CASE ( zeile(1:11) )
406
407	CASE ( 'PLOT3D_COOR' )
408	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
409	avs_coor_file_localname
410	avs_coor_file_found = .TRUE.
411
412	CASE ( 'PLOT3D_DATA' )
413	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
414	avs_data_file_localname
415	avs_data_file_found = .TRUE.
416
417	CASE DEFAULT
418	READ ( 3, '(A/A)' ) zeile, zeile
419
420	END SELECT
421
422	ENDDO
423	!
424	!-- Now the cycle numbers on the remote machine must be obtained
425	!-- using batch_scp
426	1 CLOSE ( 3 )
427	IF ( .NOT. avs_coor_file_found .OR. &
428	.NOT. avs_data_file_found ) THEN
429	message_string= 'no filename for AVS-data-file ' // &
430	'found in MRUN-config-file' // &
431	' &filename in FLD-file set to "unknown"'
432	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
433
434	avs_coor_file = 'unknown'
435	avs_data_file = 'unknown'
436	ELSE
437	get_filenames = .TRUE.
438	IF ( TRIM( host ) == 'hpmuk' .OR. &
439	TRIM( host ) == 'lcmuk' ) THEN
440	batch_scp = '/home/raasch/pub/batch_scp'
441	ELSEIF ( TRIM( host ) == 'nech' ) THEN
442	batch_scp = '/ipf/b/b323011/pub/batch_scp'
443	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
444	TRIM( host ) == 'ibmb' ) THEN
445	batch_scp = '/home/h/niksiraa/pub/batch_scp'
446	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
447	batch_scp = '/home/nhbksira/pub/batch_scp'
448	ELSE
449	message_string= 'no path for batch_scp on host "' // &
450	TRIM( host ) // '"'
451	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
452	get_filenames = .FALSE.
453	ENDIF
454
455	IF ( get_filenames ) THEN
456	!
457	!-- Determine the coordinate file name.
458	!-- /etc/passwd serves as Dummy-Datei, because it is not
459	!-- really transferred.
460	command = TRIM( batch_scp ) // ' -n -u ' // &
461	return_username(1:iusern) // ' ' // &
462	return_addres(1:iaddres) // ' /etc/passwd "' // &
463	TRIM( avs_coor_file_catalog ) // '" ' // &
464	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
465
466	CALL local_system( command )
467	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
468	READ ( 3, '(A)' ) avs_coor_file
469	CLOSE ( 3 )
470	!
471	!-- Determine the data file name
472	command = TRIM( batch_scp ) // ' -n -u ' // &
473	return_username(1:iusern) // ' ' // &
474	return_addres(1:iaddres) // ' /etc/passwd "' // &
475	TRIM( avs_data_file_catalog ) // '" ' // &
476	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
477
478	CALL local_system( command )
479	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
480	READ ( 3, '(A)' ) avs_data_file
481	CLOSE ( 3 )
482
483	ELSE
484
485	avs_coor_file = 'unknown'
486	avs_data_file = 'unknown'
487
488	ENDIF
489
490	ENDIF
491
492	!
493	!-- Output of the coordinate file description for FLD-file
494	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
495	openfile(33)%opened = .TRUE.
496	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
497	TRIM( avs_coor_file ), (nx+2)*4, &
498	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
499
500
501	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
502	DO i = 0, nx+1
503	xkoor(i) = i * dx
504	ENDDO
505	DO j = 0, ny+1
506	ykoor(j) = j * dy
507	ENDDO
508	DO k = 0, nz_do3d
509	zkoor(k) = zu(k)
510	ENDDO
511
512	!
513	!-- Create and write on AVS coordinate file
514	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
515	openfile(31)%opened = .TRUE.
516
517	WRITE (31) xkoor, ykoor, zkoor
518	DEALLOCATE( xkoor, ykoor, zkoor )
519
520	!
521	!-- Create FLD file (being written on in close_file)
522	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
523	openfile(32)%opened = .TRUE.
524
525	!
526	!-- Create flag file for compressed 3D output,
527	!-- influences output commands in mrun
528	IF ( do3d_compress ) THEN
529	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
530	WRITE ( 3, '(1X)' )
531	CLOSE ( 3 )
532	ENDIF
533
534	ENDIF
535
536	ENDIF
537
538	!
539	!-- In case of data compression output of the coordinates of the
540	!-- corresponding partial array of a PE only once at the top of the file
541	IF ( avs_output .AND. do3d_compress ) THEN
542	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
543	ENDIF
544
545	CASE ( 40:49 )
546
547	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
548	suffix = ''
549	ELSE
550	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
551	ENDIF
552	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
553	TRIM( suffix ), &
554	FORM='FORMATTED' )
555	!
556	!-- Write contents comments at the top of the file
557	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
558	TRIM( region( file_id - 40 ) )
559
560	CASE ( 50:59 )
561
562	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
563	suffix = ''
564	ELSE
565	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
566	ENDIF
567	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
568	TRIM( suffix ), &
569	FORM='FORMATTED', RECL=496 )
570	!
571	!-- Write PROFIL parameter file for output of time series
572	!-- NOTE: To be on the safe side, this output is done at the beginning of
573	!-- the model run (in case of collapse) and it is repeated in
574	!-- close_file, then, however, with value ranges for the coordinate
575	!-- systems
576	!
577	!-- Firstly determine the number of the coordinate systems to be drawn
578	cranz = 0
579	DO j = 1, 10
580	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
581	ENDDO
582	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
583	TRIM( region( file_id - 50 ) )
584	!
585	!-- Write RAHMEN parameter
586	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
587	TRIM( suffix ), &
588	FORM='FORMATTED', DELIM='APOSTROPHE' )
589	WRITE ( 90, RAHMEN )
590	!
591	!-- Determine and write CROSS parameters for the individual coordinate
592	!-- systems
593	DO j = 1, 10
594	k = cross_ts_number_count(j)
595	IF ( k /= 0 ) THEN
596	!
597	!-- Store curve numbers, colours and line style
598	klist(1:k) = cross_ts_numbers(1:k,j)
599	klist(k+1:10) = 999999
600	cucol(1:k) = linecolors(1:k)
601	lstyle(1:k) = linestyles(1:k)
602	!
603	!-- Write CROSS parameter
604	WRITE ( 90, CROSS )
605
606	ENDIF
607	ENDDO
608
609	CLOSE ( 90 )
610	!
611	!-- Write all labels at the top of the data file, but only during the
612	!-- first run of a sequence of jobs. The following jobs copy the time
613	!-- series data to the bottom of that file.
614	IF ( runnr == 0 ) THEN
615	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
616	' ' // TRIM( region( file_id - 50 ) )
617	ENDIF
618
619
620	CASE ( 80 )
621
622	IF ( myid_char == '' ) THEN
623	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
624	FORM='FORMATTED', POSITION='APPEND' )
625	ELSE
626	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
627	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
628	ENDIF
629	#if defined( __parallel )
630	!
631	!-- Set a barrier in order to allow that thereafter all other
632	!-- processors in the directory created by PE0 can open their file.
633	!-- WARNING: The following barrier will lead to hanging jobs, if
634	!-- check_open is first called from routine
635	!-- allocate_prt_memory!
636	IF ( .NOT. openfile(80)%opened_before ) THEN
637	CALL MPI_BARRIER( comm2d, ierr )
638	ENDIF
639	#endif
640	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
641	myid_char, &
642	FORM='FORMATTED', POSITION='APPEND' )
643	ENDIF
644
645	IF ( .NOT. openfile(80)%opened_before ) THEN
646	WRITE ( 80, 8000 ) TRIM( run_description_header )
647	ENDIF
648
649	CASE ( 81 )
650
651	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
652	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
653
654	CASE ( 82 )
655
656	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
657	POSITION = 'APPEND' )
658
659	CASE ( 83 )
660
661	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
662	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
663
664	CASE ( 84 )
665
666	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
667	POSITION='APPEND' )
668
669	CASE ( 85 )
670
671	IF ( myid_char == '' ) THEN
672	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
673	FORM='UNFORMATTED', POSITION='APPEND' )
674	ELSE
675	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
676	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
677	ENDIF
678	#if defined( __parallel )
679	!
680	!-- Set a barrier in order to allow that thereafter all other
681	!-- processors in the directory created by PE0 can open their file
682	CALL MPI_BARRIER( comm2d, ierr )
683	#endif
684	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
685	myid_char, &
686	FORM='UNFORMATTED', POSITION='APPEND' )
687	ENDIF
688
689	IF ( .NOT. openfile(85)%opened_before ) THEN
690	WRITE ( 85 ) run_description_header
691	!
692	!-- Attention: change version number whenever the output format on
693	!-- unit 85 is changed (see also in routine advec_particles)
694	rtext = 'data format version 3.0'
695	WRITE ( 85 ) rtext
696	WRITE ( 85 ) number_of_particle_groups, &
697	max_number_of_particle_groups
698	WRITE ( 85 ) particle_groups
699	ENDIF
700
701	#if defined( __netcdf )
702	CASE ( 101, 111 )
703	!
704	!-- Set filename depending on unit number
705	IF ( file_id == 101 ) THEN
706	filename = 'DATA_2D_XY_NETCDF' // coupling_char
707	av = 0
708	ELSE
709	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
710	av = 1
711	ENDIF
712	!
713	!-- Inquire, if there is a NetCDF file from a previuos run. This should
714	!-- be opened for extension, if its dimensions and variables match the
715	!-- actual run.
716	INQUIRE( FILE=filename, EXIST=netcdf_extend )
717
718	IF ( netcdf_extend ) THEN
719	!
720	!-- Open an existing NetCDF file for output
721	#if defined( __netcdf4 )
722	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av), &
723	COMM = comm2d, INFO = MPI_INFO_NULL )
724	#else
725	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
726	#endif
727
728	CALL handle_netcdf_error( 'check_open', 20 )
729	!
730	!-- Read header information and set all ids. If there is a mismatch
731	!-- between the previuos and the actual run, netcdf_extend is returned
732	!-- as .FALSE.
733	CALL define_netcdf_header( 'xy', netcdf_extend, av )
734
735	!
736	!-- Remove the local file, if it can not be extended
737	IF ( .NOT. netcdf_extend ) THEN
738	nc_stat = NF90_CLOSE( id_set_xy(av) )
739	CALL handle_netcdf_error( 'check_open', 21 )
740	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
741	ENDIF
742
743	ENDIF
744
745	IF ( .NOT. netcdf_extend ) THEN
746	!
747	!-- Create a new NetCDF output file with requested NetCDF format
748	IF ( netcdf_data_format == 1 ) THEN
749	!
750	!-- Classic NetCDF format
751	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
752
753	ELSEIF ( netcdf_data_format == 2 ) THEN
754	!
755	!-- 64bit-offset format
756	nc_stat = NF90_CREATE( filename, &
757	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
758	id_set_xy(av) )
759
760	#if defined( __netcdf4 )
761	ELSEIF ( netcdf_data_format == 3 ) THEN
762	!
763	!-- NetCDF4/HDF5 format
764	nc_stat = NF90_CREATE( filename, &
765	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
766	id_set_xy(av), COMM = comm2d, &
767	INFO = MPI_INFO_NULL )
768
769	ELSEIF ( netcdf_data_format == 4 ) THEN
770	!
771	!-- NetCDF4/HDF5 format with classic model flag
772	nc_stat = NF90_CREATE( filename, &
773	OR( NF90_NOCLOBBER, &
774	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
775	id_set_xy(av), COMM = comm2d, &
776	INFO = MPI_INFO_NULL )
777	#endif
778	ENDIF
779
780	CALL handle_netcdf_error( 'check_open', 22 )
781
782	!
783	!-- Define the header
784	CALL define_netcdf_header( 'xy', netcdf_extend, av )
785
786	!
787	!-- In case of parallel NetCDF output, create flag file which tells
788	!-- combine_plot_fields that nothing is to do.
789	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
790	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
791	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
792	CLOSE( 99 )
793	ENDIF
794
795	ENDIF
796
797	CASE ( 102, 112 )
798	!
799	!-- Set filename depending on unit number
800	IF ( file_id == 102 ) THEN
801	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
802	av = 0
803	ELSE
804	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
805	av = 1
806	ENDIF
807	!
808	!-- Inquire, if there is a NetCDF file from a previuos run. This should
809	!-- be opened for extension, if its dimensions and variables match the
810	!-- actual run.
811	INQUIRE( FILE=filename, EXIST=netcdf_extend )
812
813	IF ( netcdf_extend ) THEN
814	!
815	!-- Open an existing NetCDF file for output
816	#if defined( __netcdf4 )
817	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av), &
818	COMM = comm2d, INFO = MPI_INFO_NULL )
819	#else
820	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
821	#endif
822	CALL handle_netcdf_error( 'check_open', 23 )
823	!
824	!-- Read header information and set all ids. If there is a mismatch
825	!-- between the previuos and the actual run, netcdf_extend is returned
826	!-- as .FALSE.
827	CALL define_netcdf_header( 'xz', netcdf_extend, av )
828
829	!
830	!-- Remove the local file, if it can not be extended
831	IF ( .NOT. netcdf_extend ) THEN
832	nc_stat = NF90_CLOSE( id_set_xz(av) )
833	CALL handle_netcdf_error( 'check_open', 24 )
834	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
835	ENDIF
836
837	ENDIF
838
839	IF ( .NOT. netcdf_extend ) THEN
840	!
841	!-- Create a new NetCDF output file with requested NetCDF format
842	IF ( netcdf_data_format == 1 ) THEN
843	!
844	!-- Classic NetCDF format
845	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
846
847	ELSEIF ( netcdf_data_format == 2 ) THEN
848	!
849	!-- 64bit-offset format
850	nc_stat = NF90_CREATE( filename, &
851	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
852	id_set_xz(av) )
853
854	#if defined( __netcdf4 )
855	ELSEIF ( netcdf_data_format == 3 ) THEN
856	!
857	!-- NetCDF4/HDF5 format
858	nc_stat = NF90_CREATE( filename, &
859	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
860	id_set_xz(av), COMM = comm2d, &
861	INFO = MPI_INFO_NULL )
862
863	ELSEIF ( netcdf_data_format == 4 ) THEN
864	!
865	!-- NetCDF4/HDF5 format with classic model flag
866	nc_stat = NF90_CREATE( filename, &
867	OR( NF90_NOCLOBBER, &
868	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
869	id_set_xz(av), COMM = comm2d, &
870	INFO = MPI_INFO_NULL )
871	#endif
872	ENDIF
873
874	CALL handle_netcdf_error( 'check_open', 25 )
875
876	!
877	!-- Define the header
878	CALL define_netcdf_header( 'xz', netcdf_extend, av )
879
880	!
881	!-- In case of parallel NetCDF output, create flag file which tells
882	!-- combine_plot_fields that nothing is to do.
883	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
884	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
885	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
886	CLOSE( 99 )
887	ENDIF
888
889	ENDIF
890
891	CASE ( 103, 113 )
892	!
893	!-- Set filename depending on unit number
894	IF ( file_id == 103 ) THEN
895	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
896	av = 0
897	ELSE
898	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
899	av = 1
900	ENDIF
901	!
902	!-- Inquire, if there is a NetCDF file from a previuos run. This should
903	!-- be opened for extension, if its dimensions and variables match the
904	!-- actual run.
905	INQUIRE( FILE=filename, EXIST=netcdf_extend )
906
907	IF ( netcdf_extend ) THEN
908	!
909	!-- Open an existing NetCDF file for output
910	#if defined( __netcdf4 )
911	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av), &
912	COMM = comm2d, INFO = MPI_INFO_NULL )
913	#else
914	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
915	#endif
916	CALL handle_netcdf_error( 'check_open', 26 )
917	!
918	!-- Read header information and set all ids. If there is a mismatch
919	!-- between the previuos and the actual run, netcdf_extend is returned
920	!-- as .FALSE.
921	CALL define_netcdf_header( 'yz', netcdf_extend, av )
922
923	!
924	!-- Remove the local file, if it can not be extended
925	IF ( .NOT. netcdf_extend ) THEN
926	nc_stat = NF90_CLOSE( id_set_yz(av) )
927	CALL handle_netcdf_error( 'check_open', 27 )
928	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
929	ENDIF
930
931	ENDIF
932
933	IF ( .NOT. netcdf_extend ) THEN
934	!
935	!-- Create a new NetCDF output file with requested NetCDF format
936	IF ( netcdf_data_format == 1 ) THEN
937	!
938	!-- Classic NetCDF format
939	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
940
941	ELSEIF ( netcdf_data_format == 2 ) THEN
942	!
943	!-- 64bit-offset format
944	nc_stat = NF90_CREATE( filename, &
945	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
946	id_set_yz(av) )
947
948	#if defined( __netcdf4 )
949	ELSEIF ( netcdf_data_format == 3 ) THEN
950	!
951	!-- NetCDF4/HDF5 format
952	nc_stat = NF90_CREATE( filename, &
953	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
954	id_set_yz(av), COMM = comm2d, &
955	INFO = MPI_INFO_NULL )
956
957	ELSEIF ( netcdf_data_format == 4 ) THEN
958	!
959	!-- NetCDF4/HDF5 format with classic model flag
960	nc_stat = NF90_CREATE( filename, &
961	OR( NF90_NOCLOBBER, &
962	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
963	id_set_yz(av), COMM = comm2d, &
964	INFO = MPI_INFO_NULL )
965	#endif
966	ENDIF
967
968	CALL handle_netcdf_error( 'check_open', 28 )
969
970	!
971	!-- Define the header
972	CALL define_netcdf_header( 'yz', netcdf_extend, av )
973
974	!
975	!-- In case of parallel NetCDF output, create flag file which tells
976	!-- combine_plot_fields that nothing is to do.
977	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
978	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
979	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
980	CLOSE( 99 )
981	ENDIF
982
983	ENDIF
984
985	CASE ( 104 )
986	!
987	!-- Set filename
988	filename = 'DATA_1D_PR_NETCDF' // coupling_char
989
990	!
991	!-- Inquire, if there is a NetCDF file from a previuos run. This should
992	!-- be opened for extension, if its variables match the actual run.
993	INQUIRE( FILE=filename, EXIST=netcdf_extend )
994
995	IF ( netcdf_extend ) THEN
996	!
997	!-- Open an existing NetCDF file for output
998	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
999	CALL handle_netcdf_error( 'check_open', 29 )
1000	!
1001	!-- Read header information and set all ids. If there is a mismatch
1002	!-- between the previuos and the actual run, netcdf_extend is returned
1003	!-- as .FALSE.
1004	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1005
1006	!
1007	!-- Remove the local file, if it can not be extended
1008	IF ( .NOT. netcdf_extend ) THEN
1009	nc_stat = NF90_CLOSE( id_set_pr )
1010	CALL handle_netcdf_error( 'check_open', 30 )
1011	CALL local_system( 'rm ' // TRIM( filename ) )
1012	ENDIF
1013
1014	ENDIF
1015
1016	IF ( .NOT. netcdf_extend ) THEN
1017	!
1018	!-- Create a new NetCDF output file
1019	IF ( netcdf_data_format > 1 ) THEN
1020	nc_stat = NF90_CREATE( filename, &
1021	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1022	id_set_pr )
1023	ELSE
1024	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
1025	ENDIF
1026	CALL handle_netcdf_error( 'check_open', 31 )
1027	!
1028	!-- Define the header
1029	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
1030
1031	ENDIF
1032
1033	CASE ( 105 )
1034	!
1035	!-- Set filename
1036	filename = 'DATA_1D_TS_NETCDF' // coupling_char
1037
1038	!
1039	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1040	!-- be opened for extension, if its variables match the actual run.
1041	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1042
1043	IF ( netcdf_extend ) THEN
1044	!
1045	!-- Open an existing NetCDF file for output
1046	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
1047	CALL handle_netcdf_error( 'check_open', 32 )
1048	!
1049	!-- Read header information and set all ids. If there is a mismatch
1050	!-- between the previuos and the actual run, netcdf_extend is returned
1051	!-- as .FALSE.
1052	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1053
1054	!
1055	!-- Remove the local file, if it can not be extended
1056	IF ( .NOT. netcdf_extend ) THEN
1057	nc_stat = NF90_CLOSE( id_set_ts )
1058	CALL handle_netcdf_error( 'check_open', 33 )
1059	CALL local_system( 'rm ' // TRIM( filename ) )
1060	ENDIF
1061
1062	ENDIF
1063
1064	IF ( .NOT. netcdf_extend ) THEN
1065	!
1066	!-- Create a new NetCDF output file
1067	IF ( netcdf_data_format > 1 ) THEN
1068	nc_stat = NF90_CREATE( filename, &
1069	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1070	id_set_ts )
1071	ELSE
1072	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
1073	ENDIF
1074	CALL handle_netcdf_error( 'check_open', 34 )
1075	!
1076	!-- Define the header
1077	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
1078
1079	ENDIF
1080
1081
1082	CASE ( 106, 116 )
1083	!
1084	!-- Set filename depending on unit number
1085	IF ( file_id == 106 ) THEN
1086	filename = 'DATA_3D_NETCDF' // coupling_char
1087	av = 0
1088	ELSE
1089	filename = 'DATA_3D_AV_NETCDF' // coupling_char
1090	av = 1
1091	ENDIF
1092	!
1093	!-- Inquire, if there is a NetCDF file from a previous run. This should
1094	!-- be opened for extension, if its dimensions and variables match the
1095	!-- actual run.
1096	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1097
1098	IF ( netcdf_extend ) THEN
1099	!
1100	!-- Open an existing NetCDF file for output
1101	#if defined( __netcdf4 )
1102	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av), &
1103	COMM = comm2d, INFO = MPI_INFO_NULL )
1104	#else
1105	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
1106	#endif
1107	CALL handle_netcdf_error( 'check_open', 35 )
1108	!
1109	!-- Read header information and set all ids. If there is a mismatch
1110	!-- between the previuos and the actual run, netcdf_extend is returned
1111	!-- as .FALSE.
1112	CALL define_netcdf_header( '3d', netcdf_extend, av )
1113
1114	!
1115	!-- Remove the local file, if it can not be extended
1116	IF ( .NOT. netcdf_extend ) THEN
1117	nc_stat = NF90_CLOSE( id_set_3d(av) )
1118	CALL handle_netcdf_error( 'check_open', 36 )
1119	CALL local_system('rm ' // TRIM( filename ) )
1120	ENDIF
1121
1122	ENDIF
1123
1124	IF ( .NOT. netcdf_extend ) THEN
1125	!
1126	!-- Create a new NetCDF output file with requested NetCDF format
1127	IF ( netcdf_data_format == 1 ) THEN
1128	!
1129	!-- Classic NetCDF format
1130	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1131
1132	ELSEIF ( netcdf_data_format == 2 ) THEN
1133	!
1134	!-- 64bit-offset format
1135	nc_stat = NF90_CREATE( filename, &
1136	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1137	id_set_3d(av) )
1138
1139	#if defined( __netcdf4 )
1140	ELSEIF ( netcdf_data_format == 3 ) THEN
1141	!
1142	!-- NetCDF4/HDF5 format
1143	nc_stat = NF90_CREATE( filename, &
1144	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1145	id_set_3d(av), COMM = comm2d, &
1146	INFO = MPI_INFO_NULL )
1147
1148	ELSEIF ( netcdf_data_format == 4 ) THEN
1149	!
1150	!-- NetCDF4/HDF5 format with classic model flag
1151	nc_stat = NF90_CREATE( filename, &
1152	OR( NF90_NOCLOBBER, &
1153	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1154	id_set_3d(av), COMM = comm2d, &
1155	INFO = MPI_INFO_NULL )
1156	#endif
1157	ENDIF
1158
1159	CALL handle_netcdf_error( 'check_open', 37 )
1160
1161	!
1162	!-- Define the header
1163	CALL define_netcdf_header( '3d', netcdf_extend, av )
1164
1165	!
1166	!-- In case of parallel NetCDF output, create flag file which tells
1167	!-- combine_plot_fields that nothing is to do.
1168	IF ( myid == 0 .AND. netcdf_data_format > 2 ) THEN
1169	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
1170	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
1171	CLOSE( 99 )
1172	ENDIF
1173
1174	ENDIF
1175
1176
1177	CASE ( 107 )
1178	!
1179	!-- Set filename
1180	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1181
1182	!
1183	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1184	!-- be opened for extension, if its variables match the actual run.
1185	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1186
1187	IF ( netcdf_extend ) THEN
1188	!
1189	!-- Open an existing NetCDF file for output
1190	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1191	CALL handle_netcdf_error( 'check_open', 38 )
1192
1193	!
1194	!-- Read header information and set all ids. If there is a mismatch
1195	!-- between the previuos and the actual run, netcdf_extend is returned
1196	!-- as .FALSE.
1197	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1198
1199	!
1200	!-- Remove the local file, if it can not be extended
1201	IF ( .NOT. netcdf_extend ) THEN
1202	nc_stat = NF90_CLOSE( id_set_sp )
1203	CALL handle_netcdf_error( 'check_open', 39 )
1204	CALL local_system( 'rm ' // TRIM( filename ) )
1205	ENDIF
1206
1207	ENDIF
1208
1209	IF ( .NOT. netcdf_extend ) THEN
1210	!
1211	!-- Create a new NetCDF output file
1212	IF ( netcdf_data_format > 1 ) THEN
1213	nc_stat = NF90_CREATE( filename, &
1214	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1215	id_set_sp )
1216	ELSE
1217	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1218	ENDIF
1219	CALL handle_netcdf_error( 'check_open', 40 )
1220	!
1221	!-- Define the header
1222	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1223
1224	ENDIF
1225
1226
1227	CASE ( 108 )
1228
1229	IF ( myid_char == '' ) THEN
1230	filename = 'DATA_PRT_NETCDF' // coupling_char
1231	ELSE
1232	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1233	myid_char
1234	ENDIF
1235	!
1236	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1237	!-- be opened for extension, if its variables match the actual run.
1238	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1239
1240	IF ( netcdf_extend ) THEN
1241	!
1242	!-- Open an existing NetCDF file for output
1243	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1244	CALL handle_netcdf_error( 'check_open', 41 )
1245	!
1246	!-- Read header information and set all ids. If there is a mismatch
1247	!-- between the previuos and the actual run, netcdf_extend is returned
1248	!-- as .FALSE.
1249	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1250
1251	!
1252	!-- Remove the local file, if it can not be extended
1253	IF ( .NOT. netcdf_extend ) THEN
1254	nc_stat = NF90_CLOSE( id_set_prt )
1255	CALL handle_netcdf_error( 'check_open', 42 )
1256	CALL local_system( 'rm ' // filename )
1257	ENDIF
1258
1259	ENDIF
1260
1261	IF ( .NOT. netcdf_extend ) THEN
1262
1263	!
1264	!-- For runs on multiple processors create the subdirectory
1265	IF ( myid_char /= '' ) THEN
1266	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1267	THEN ! needs modification in case of non-extendable sets
1268	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1269	TRIM( coupling_char ) // '/' )
1270	ENDIF
1271	#if defined( __parallel )
1272	!
1273	!-- Set a barrier in order to allow that all other processors in the
1274	!-- directory created by PE0 can open their file
1275	CALL MPI_BARRIER( comm2d, ierr )
1276	#endif
1277	ENDIF
1278
1279	!
1280	!-- Create a new NetCDF output file with requested NetCDF format
1281	IF ( netcdf_data_format == 1 ) THEN
1282	!
1283	!-- Classic NetCDF format
1284	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1285
1286	ELSEIF ( netcdf_data_format == 2 ) THEN
1287	!
1288	!-- 64bit-offset format
1289	nc_stat = NF90_CREATE( filename, &
1290	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1291	id_set_prt )
1292
1293	#if defined( __netcdf4 )
1294	ELSEIF ( netcdf_data_format == 3 ) THEN
1295	!
1296	!-- NetCDF4/HDF5 format, but no parallel output into a single file!
1297	nc_stat = NF90_CREATE( filename, &
1298	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1299	id_set_prt )
1300
1301	ELSEIF ( netcdf_data_format == 4 ) THEN
1302	!
1303	!-- NetCDF4/HDF5 format with classic model flag, but no parallel
1304	!-- output into a single file!
1305	nc_stat = NF90_CREATE( filename, &
1306	OR( NF90_NOCLOBBER, &
1307	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1308	id_set_prt )
1309	#endif
1310	ENDIF
1311
1312	CALL handle_netcdf_error( 'check_open', 43 )
1313
1314	!
1315	!-- Define the header
1316	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1317
1318	ENDIF
1319
1320	CASE ( 109 )
1321	!
1322	!-- Set filename
1323	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1324
1325	!
1326	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1327	!-- be opened for extension, if its variables match the actual run.
1328	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1329
1330	IF ( netcdf_extend ) THEN
1331	!
1332	!-- Open an existing NetCDF file for output
1333	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1334	CALL handle_netcdf_error( 'check_open', 393 )
1335	!
1336	!-- Read header information and set all ids. If there is a mismatch
1337	!-- between the previuos and the actual run, netcdf_extend is returned
1338	!-- as .FALSE.
1339	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1340
1341	!
1342	!-- Remove the local file, if it can not be extended
1343	IF ( .NOT. netcdf_extend ) THEN
1344	nc_stat = NF90_CLOSE( id_set_pts )
1345	CALL handle_netcdf_error( 'check_open', 394 )
1346	CALL local_system( 'rm ' // TRIM( filename ) )
1347	ENDIF
1348
1349	ENDIF
1350
1351	IF ( .NOT. netcdf_extend ) THEN
1352	!
1353	!-- Create a new NetCDF output file
1354	IF ( netcdf_data_format > 1 ) THEN
1355	nc_stat = NF90_CREATE( filename, &
1356	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1357	id_set_pts )
1358	ELSE
1359	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1360	ENDIF
1361	CALL handle_netcdf_error( 'check_open', 395 )
1362	!
1363	!-- Define the header
1364	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1365
1366	ENDIF
1367
1368	CASE ( 121:160 )
1369	!
1370	!-- Set filename depending on unit number
1371	IF ( file_id <= 140 ) THEN
1372	mid = file_id - 120
1373	WRITE ( mask_char,'(I2.2)') mid
1374	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // coupling_char
1375	av = 0
1376	ELSE
1377	mid = file_id - 140
1378	WRITE ( mask_char,'(I2.2)') mid
1379	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1380	coupling_char
1381	av = 1
1382	ENDIF
1383	!
1384	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1385	!-- be opened for extension, if its dimensions and variables match the
1386	!-- actual run.
1387	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1388
1389	IF ( netcdf_extend ) THEN
1390	!
1391	!-- Open an existing NetCDF file for output
1392	#if defined( __netcdf4 )
1393	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av), &
1394	COMM = comm2d, INFO = MPI_INFO_NULL )
1395	#else
1396	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_mask(mid,av) )
1397	#endif
1398	CALL handle_netcdf_error( 'check_open', 9998 )
1399	!
1400	!-- Read header information and set all ids. If there is a mismatch
1401	!-- between the previuos and the actual run, netcdf_extend is returned
1402	!-- as .FALSE.
1403	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1404
1405	!
1406	!-- Remove the local file, if it can not be extended
1407	IF ( .NOT. netcdf_extend ) THEN
1408	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1409	CALL handle_netcdf_error( 'check_open', 9998 )
1410	CALL local_system('rm ' // TRIM( filename ) )
1411	ENDIF
1412
1413	ENDIF
1414
1415	IF ( .NOT. netcdf_extend ) THEN
1416	!
1417	!-- Create a new NetCDF output file with requested NetCDF format
1418	IF ( netcdf_data_format == 1 ) THEN
1419	!
1420	!-- Classic NetCDF format
1421	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, &
1422	id_set_mask(mid,av) )
1423
1424	ELSEIF ( netcdf_data_format == 2 ) THEN
1425	!
1426	!-- 64bit-offset format
1427	nc_stat = NF90_CREATE( filename, &
1428	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1429	id_set_mask(mid,av) )
1430
1431
1432	#if defined( __netcdf4 )
1433	ELSEIF ( netcdf_data_format == 3 ) THEN
1434	!
1435	!-- NetCDF4/HDF5 format
1436	nc_stat = NF90_CREATE( filename, &
1437	OR( NF90_NOCLOBBER, NF90_NETCDF4 ), &
1438	id_set_mask(mid,av), COMM = comm2d, &
1439	INFO = MPI_INFO_NULL )
1440
1441	ELSEIF ( netcdf_data_format == 4 ) THEN
1442	!
1443	!-- NetCDF4/HDF5 format with classic model flag
1444	nc_stat = NF90_CREATE( filename, &
1445	OR( NF90_NOCLOBBER, &
1446	OR( NF90_CLASSIC_MODEL, NF90_HDF5 ) ), &
1447	id_set_mask(mid,av), COMM = comm2d, &
1448	INFO = MPI_INFO_NULL )
1449	#endif
1450	ENDIF
1451
1452	CALL handle_netcdf_error( 'check_open', 9998 )
1453	!
1454	!-- Define the header
1455	CALL define_netcdf_header( 'ma', netcdf_extend, file_id )
1456
1457	ENDIF
1458
1459
1460	#else
1461
1462	CASE ( 101:109, 111:113, 116, 121:160 )
1463
1464	!
1465	!-- Nothing is done in case of missing netcdf support
1466	RETURN
1467
1468	#endif
1469
1470	CASE DEFAULT
1471
1472	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1473	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1474
1475	END SELECT
1476
1477	!
1478	!-- Set open flag
1479	openfile(file_id)%opened = .TRUE.
1480
1481	!
1482	!-- Formats
1483	3300 FORMAT ('#'/ &
1484	'coord 1 file=',A,' filetype=unformatted'/ &
1485	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1486	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1487	'#')
1488	4000 FORMAT ('# ',A)
1489	5000 FORMAT ('# ',A/ &
1490	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1491	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1492	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1493	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1494	8000 FORMAT (A/ &
1495	' step time # of parts lPE sent/recv rPE sent/recv ',&
1496	'sPE sent/recv nPE sent/recv max # of parts'/ &
1497	103('-'))
1498
1499	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |