Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 267

Last change on this file since 267 was 263, checked in by heinze, 16 years ago
Output of NetCDF messages with aid of message handling routine.
Property svn:keywords set to `Id`
File size: 45.8 KB

Line
1	SUBROUTINE check_open( file_id )
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! Output of NetCDF messages with aid of message handling routine.
7	! Output of messages replaced by message handling routine
8	!
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: check_open.f90 263 2009-03-18 12:26:04Z weinreis $
13	!
14	! 146 2008-01-17 13:08:34Z raasch
15	! First opening of unit 13 openes file _0000 on all PEs (parallel version)
16	! because only this file contains the global variables,
17	! myid_char_14 removed
18	!
19	! 120 2007-10-17 11:54:43Z raasch
20	! Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d
21	!
22	! 105 2007-08-08 07:12:55Z raasch
23	! Different filenames are used in case of a coupled simulation,
24	! coupling_char added to all relevant filenames
25	!
26	! 82 2007-04-16 15:40:52Z raasch
27	! Call of local_getenv removed, preprocessor directives for old systems removed
28	!
29	! 46 2007-03-05 06:00:47Z raasch
30	! +netcdf_64bit_3d to switch on 64bit offset only for 3D files
31	!
32	! RCS Log replace by Id keyword, revision history cleaned up
33	!
34	! Revision 1.44 2006/08/22 13:48:34 raasch
35	! xz and yz cross sections now up to nzt+1
36	!
37	! Revision 1.1 1997/08/11 06:10:55 raasch
38	! Initial revision
39	!
40	!
41	! Description:
42	! ------------
43	! Check if file unit is open. If not, open file and, if necessary, write a
44	! header or start other initializing actions, respectively.
45	!------------------------------------------------------------------------------!
46
47	USE array_kind
48	USE arrays_3d
49	USE control_parameters
50	USE grid_variables
51	USE indices
52	USE netcdf_control
53	USE particle_attributes
54	USE pegrid
55	USE profil_parameter
56	USE statistics
57
58	IMPLICIT NONE
59
60	CHARACTER (LEN=2) :: suffix
61	CHARACTER (LEN=20) :: xtext = 'time in s'
62	CHARACTER (LEN=30) :: filename
63	CHARACTER (LEN=40) :: avs_coor_file, avs_coor_file_localname, &
64	avs_data_file_localname
65	CHARACTER (LEN=80) :: rtext
66	CHARACTER (LEN=100) :: avs_coor_file_catalog, avs_data_file_catalog, &
67	batch_scp, zeile
68	CHARACTER (LEN=400) :: command
69
70	INTEGER :: av, anzzeile = 1, cranz, file_id, i, iaddres, ierr1, iusern, &
71	j, k, legpos = 1, timodex = 1
72	INTEGER, DIMENSION(10) :: cucol, klist, lstyle
73
74	LOGICAL :: avs_coor_file_found = .FALSE., avs_data_file_found = .FALSE., &
75	datleg = .TRUE., get_filenames, grid = .TRUE., netcdf_extend, &
76	rand = .TRUE., swap = .TRUE., twoxa = .TRUE., twoya = .TRUE.
77
78	REAL :: ansx = -999.999, ansy = -999.999, gwid = 0.1, rlegfak = 1.5, &
79	sizex = 250.0, sizey = 40.0, texfac = 1.5
80
81	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
82	REAL(spk), DIMENSION(:), ALLOCATABLE :: xkoor, ykoor, zkoor
83
84
85	NAMELIST /RAHMEN/ anzzeile, cranz, datleg, rtext, swap
86	NAMELIST /CROSS/ ansx, ansy, cucol, grid, gwid, klist, legpos, lstyle, &
87	rand, rlegfak, sizex, sizey, texfac, &
88	timodex, twoxa, twoya, xtext
89
90
91	!
92	!-- Immediate return if file already open
93	IF ( openfile(file_id)%opened ) RETURN
94
95	!
96	!-- Only certain files are allowed to be re-opened
97	!-- NOTE: some of the other files perhaps also could be re-opened, but it
98	!-- has not been checked so far, if it works!
99	IF ( openfile(file_id)%opened_before ) THEN
100	SELECT CASE ( file_id )
101	CASE ( 13, 14, 21, 22, 23, 80:85 )
102	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
103	message_string = 're-open of unit ' // &
104	' 14 is not verified. Please check results!'
105	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
106	ENDIF
107
108	CASE DEFAULT
109	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
110	' is not allowed'
111	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
112
113	RETURN
114
115	END SELECT
116	ENDIF
117
118	!
119	!-- Check if file may be opened on the relevant PE
120	SELECT CASE ( file_id )
121
122	CASE ( 15, 16, 17, 18, 19, 40:49, 50:59, 81:84, 101:107, 109, 111:113, &
123	116 )
124
125	IF ( myid /= 0 ) THEN
126	WRITE( message_string, * ) 'opening file-id ',file_id, &
127	' not allowed for PE ',myid
128	CALL message( 'check_open', 'PA0167', 2, 2, 0, 6, 0 )
129	ENDIF
130
131	CASE ( 21, 22, 23 )
132
133	IF ( .NOT. data_output_2d_on_each_pe ) THEN
134	IF ( myid /= 0 ) THEN
135	WRITE( message_string, * ) 'opening file-id ',file_id, &
136	' not allowed for PE ',myid
137	CALL message( 'check_open', 'PA0167', 2, 2, 0, 6, 0 )
138	END IF
139	ENDIF
140
141	CASE ( 27, 28, 29, 31, 32, 33, 71:73, 90:99 )
142
143	!
144	!-- File-ids that are used temporarily in other routines
145	WRITE( message_string, * ) 'opening file-id ',file_id, &
146	' is not allowed since it is used otherwise'
147	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
148
149	END SELECT
150
151	!
152	!-- Open relevant files
153	SELECT CASE ( file_id )
154
155	CASE ( 11 )
156
157	OPEN ( 11, FILE='PARIN'//coupling_char, FORM='FORMATTED', &
158	STATUS='OLD' )
159
160	CASE ( 13 )
161
162	IF ( myid_char == '' ) THEN
163	OPEN ( 13, FILE='BININ'//coupling_char//myid_char, &
164	FORM='UNFORMATTED', STATUS='OLD' )
165	ELSE
166	!
167	!-- First opening of unit 13 openes file _0000 on all PEs because only
168	!-- this file contains the global variables
169	IF ( .NOT. openfile(file_id)%opened_before ) THEN
170	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_0000',&
171	FORM='UNFORMATTED', STATUS='OLD' )
172	ELSE
173	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'//myid_char,&
174	FORM='UNFORMATTED', STATUS='OLD' )
175	ENDIF
176	ENDIF
177
178	CASE ( 14 )
179
180	IF ( myid_char == '' ) THEN
181	OPEN ( 14, FILE='BINOUT'//coupling_char//myid_char, &
182	FORM='UNFORMATTED', POSITION='APPEND' )
183	ELSE
184	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
185	CALL local_system( 'mkdir BINOUT' // coupling_char )
186	ENDIF
187	#if defined( __parallel )
188	!
189	!-- Set a barrier in order to allow that all other processors in the
190	!-- directory created by PE0 can open their file
191	CALL MPI_BARRIER( comm2d, ierr )
192	#endif
193	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
194	FORM='UNFORMATTED', POSITION='APPEND' )
195	ENDIF
196
197	CASE ( 15 )
198
199	OPEN ( 15, FILE='RUN_CONTROL'//coupling_char, FORM='FORMATTED' )
200
201	CASE ( 16 )
202
203	OPEN ( 16, FILE='LIST_PROFIL'//coupling_char, FORM='FORMATTED' )
204
205	CASE ( 17 )
206
207	OPEN ( 17, FILE='LIST_PROFIL_1D'//coupling_char, FORM='FORMATTED' )
208
209	CASE ( 18 )
210
211	OPEN ( 18, FILE='CPU_MEASURES'//coupling_char, FORM='FORMATTED' )
212
213	CASE ( 19 )
214
215	OPEN ( 19, FILE='HEADER'//coupling_char, FORM='FORMATTED' )
216
217	CASE ( 20 )
218
219	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
220	CALL local_system( 'mkdir DATA_LOG' // coupling_char )
221	ENDIF
222	IF ( myid_char == '' ) THEN
223	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_0000', &
224	FORM='UNFORMATTED', POSITION='APPEND' )
225	ELSE
226	#if defined( __parallel )
227	!
228	!-- Set a barrier in order to allow that all other processors in the
229	!-- directory created by PE0 can open their file
230	CALL MPI_BARRIER( comm2d, ierr )
231	#endif
232	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'//myid_char,&
233	FORM='UNFORMATTED', POSITION='APPEND' )
234	ENDIF
235
236	CASE ( 21 )
237
238	IF ( data_output_2d_on_each_pe ) THEN
239	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
240	FORM='UNFORMATTED', POSITION='APPEND' )
241	ELSE
242	OPEN ( 21, FILE='PLOT2D_XY'//coupling_char, &
243	FORM='UNFORMATTED', POSITION='APPEND' )
244	ENDIF
245
246	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
247	!
248	!-- Output for combine_plot_fields
249	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
250	WRITE (21) -1, nx+1, -1, ny+1 ! total array size
251	WRITE (21) 0, nx+1, 0, ny+1 ! output part
252	ENDIF
253	!
254	!-- Determine and write ISO2D coordiante header
255	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
256	hu = 0.0
257	ho = (ny+1) * dy
258	DO i = 1, ny
259	eta(i) = REAL( i ) / ( ny + 1.0 )
260	ENDDO
261	eta(0) = 0.0
262	eta(ny+1) = 1.0
263
264	WRITE (21) dx,eta,hu,ho
265	DEALLOCATE( eta, ho, hu )
266
267	!
268	!-- Create output file for local parameters
269	IF ( iso2d_output ) THEN
270	OPEN ( 27, FILE='PLOT2D_XY_LOCAL'//coupling_char, &
271	FORM='FORMATTED', DELIM='APOSTROPHE' )
272	openfile(27)%opened = .TRUE.
273	ENDIF
274
275	ENDIF
276
277	CASE ( 22 )
278
279	IF ( data_output_2d_on_each_pe ) THEN
280	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
281	FORM='UNFORMATTED', POSITION='APPEND' )
282	ELSE
283	OPEN ( 22, FILE='PLOT2D_XZ'//coupling_char, FORM='UNFORMATTED', &
284	POSITION='APPEND' )
285	ENDIF
286
287	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
288	!
289	!-- Output for combine_plot_fields
290	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
291	WRITE (22) -1, nx+1, 0, nz+1 ! total array size
292	WRITE (22) 0, nx+1, 0, nz+1 ! output part
293	ENDIF
294	!
295	!-- Determine and write ISO2D coordiante header
296	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
297	hu = 0.0
298	ho = zu(nz+1)
299	DO i = 1, nz
300	eta(i) = REAL( zu(i) ) / zu(nz+1)
301	ENDDO
302	eta(0) = 0.0
303	eta(nz+1) = 1.0
304
305	WRITE (22) dx,eta,hu,ho
306	DEALLOCATE( eta, ho, hu )
307	!
308	!-- Create output file for local parameters
309	OPEN ( 28, FILE='PLOT2D_XZ_LOCAL'//coupling_char, &
310	FORM='FORMATTED', DELIM='APOSTROPHE' )
311	openfile(28)%opened = .TRUE.
312
313	ENDIF
314
315	CASE ( 23 )
316
317	IF ( data_output_2d_on_each_pe ) THEN
318	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
319	FORM='UNFORMATTED', POSITION='APPEND' )
320	ELSE
321	OPEN ( 23, FILE='PLOT2D_YZ'//coupling_char, FORM='UNFORMATTED', &
322	POSITION='APPEND' )
323	ENDIF
324
325	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
326	!
327	!-- Output for combine_plot_fields
328	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
329	WRITE (23) -1, ny+1, 0, nz+1 ! total array size
330	WRITE (23) 0, ny+1, 0, nz+1 ! output part
331	ENDIF
332	!
333	!-- Determine and write ISO2D coordiante header
334	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
335	hu = 0.0
336	ho = zu(nz+1)
337	DO i = 1, nz
338	eta(i) = REAL( zu(i) ) / zu(nz+1)
339	ENDDO
340	eta(0) = 0.0
341	eta(nz+1) = 1.0
342
343	WRITE (23) dx,eta,hu,ho
344	DEALLOCATE( eta, ho, hu )
345	!
346	!-- Create output file for local parameters
347	OPEN ( 29, FILE='PLOT2D_YZ_LOCAL'//coupling_char, &
348	FORM='FORMATTED', DELIM='APOSTROPHE' )
349	openfile(29)%opened = .TRUE.
350
351	ENDIF
352
353	CASE ( 30 )
354
355	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
356	FORM='UNFORMATTED' )
357	!
358	!-- Write coordinate file for AVS
359	IF ( myid == 0 ) THEN
360	#if defined( __parallel )
361	!
362	!-- Specifications for combine_plot_fields
363	IF ( .NOT. do3d_compress ) THEN
364	WRITE ( 30 ) -1,nx+1,-1,ny+1,0,nz_do3d
365	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
366	ENDIF
367	#endif
368	!
369	!-- Write coordinate file for AVS:
370	!-- First determine file names (including cyle numbers) of AVS files on
371	!-- target machine (to which the files are to be transferred).
372	!-- Therefore path information has to be obtained first.
373	IF ( avs_output ) THEN
374	iaddres = LEN_TRIM( return_addres )
375	iusern = LEN_TRIM( return_username )
376
377	OPEN ( 3, FILE='OUTPUT_FILE_CONNECTIONS', FORM='FORMATTED' )
378	DO WHILE ( .NOT. avs_coor_file_found .OR. &
379	.NOT. avs_data_file_found )
380
381	READ ( 3, '(A)', END=1 ) zeile
382
383	SELECT CASE ( zeile(1:11) )
384
385	CASE ( 'PLOT3D_COOR' )
386	READ ( 3, '(A/A)' ) avs_coor_file_catalog, &
387	avs_coor_file_localname
388	avs_coor_file_found = .TRUE.
389
390	CASE ( 'PLOT3D_DATA' )
391	READ ( 3, '(A/A)' ) avs_data_file_catalog, &
392	avs_data_file_localname
393	avs_data_file_found = .TRUE.
394
395	CASE DEFAULT
396	READ ( 3, '(A/A)' ) zeile, zeile
397
398	END SELECT
399
400	ENDDO
401	!
402	!-- Now the cycle numbers on the remote machine must be obtained
403	!-- using batch_scp
404	1 CLOSE ( 3 )
405	IF ( .NOT. avs_coor_file_found .OR. &
406	.NOT. avs_data_file_found ) THEN
407	message_string= 'no filename for AVS-data-file ' // &
408	'found in MRUN-config-file' // &
409	' &filename in FLD-file set to "unknown"'
410	CALL message( 'check_open', 'PA0169', 0, 1, 0, 6, 0 )
411
412	avs_coor_file = 'unknown'
413	avs_data_file = 'unknown'
414	ELSE
415	get_filenames = .TRUE.
416	IF ( TRIM( host ) == 'hpmuk' .OR. &
417	TRIM( host ) == 'lcmuk' ) THEN
418	batch_scp = '/home/raasch/pub/batch_scp'
419	ELSEIF ( TRIM( host ) == 'nech' ) THEN
420	batch_scp = '/ipf/b/b323011/pub/batch_scp'
421	ELSEIF ( TRIM( host ) == 'ibmh' .OR. &
422	TRIM( host ) == 'ibmb' ) THEN
423	batch_scp = '/home/h/niksiraa/pub/batch_scp'
424	ELSEIF ( TRIM( host ) == 't3eb' ) THEN
425	batch_scp = '/home/nhbksira/pub/batch_scp'
426	ELSE
427	message_string= 'no path for batch_scp on host "' // &
428	TRIM( host ) // '"'
429	CALL message( 'check_open', 'PA0170', 0, 1, 0, 6, 0 )
430	get_filenames = .FALSE.
431	ENDIF
432
433	IF ( get_filenames ) THEN
434	!
435	!-- Determine the coordinate file name.
436	!-- /etc/passwd serves as Dummy-Datei, because it is not
437	!-- really transferred.
438	command = TRIM( batch_scp ) // ' -n -u ' // &
439	return_username(1:iusern) // ' ' // &
440	return_addres(1:iaddres) // ' /etc/passwd "' // &
441	TRIM( avs_coor_file_catalog ) // '" ' // &
442	TRIM( avs_coor_file_localname ) // ' > REMOTE_FILENAME'
443
444	CALL local_system( command )
445	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
446	READ ( 3, '(A)' ) avs_coor_file
447	CLOSE ( 3 )
448	!
449	!-- Determine the data file name
450	command = TRIM( batch_scp ) // ' -n -u ' // &
451	return_username(1:iusern) // ' ' // &
452	return_addres(1:iaddres) // ' /etc/passwd "' // &
453	TRIM( avs_data_file_catalog ) // '" ' // &
454	TRIM( avs_data_file_localname ) // ' > REMOTE_FILENAME'
455
456	CALL local_system( command )
457	OPEN ( 3, FILE='REMOTE_FILENAME', FORM='FORMATTED' )
458	READ ( 3, '(A)' ) avs_data_file
459	CLOSE ( 3 )
460
461	ELSE
462
463	avs_coor_file = 'unknown'
464	avs_data_file = 'unknown'
465
466	ENDIF
467
468	ENDIF
469
470	!
471	!-- Output of the coordinate file description for FLD-file
472	OPEN ( 33, FILE='PLOT3D_FLD_COOR', FORM='FORMATTED' )
473	openfile(33)%opened = .TRUE.
474	WRITE ( 33, 3300 ) TRIM( avs_coor_file ), &
475	TRIM( avs_coor_file ), (nx+2)*4, &
476	TRIM( avs_coor_file ), (nx+2)4+(ny+2)4
477
478
479	ALLOCATE( xkoor(0:nx+1), ykoor(0:ny+1), zkoor(0:nz_do3d) )
480	DO i = 0, nx+1
481	xkoor(i) = i * dx
482	ENDDO
483	DO j = 0, ny+1
484	ykoor(j) = j * dy
485	ENDDO
486	DO k = 0, nz_do3d
487	zkoor(k) = zu(k)
488	ENDDO
489
490	!
491	!-- Create and write on AVS coordinate file
492	OPEN ( 31, FILE='PLOT3D_COOR', FORM='UNFORMATTED' )
493	openfile(31)%opened = .TRUE.
494
495	WRITE (31) xkoor, ykoor, zkoor
496	DEALLOCATE( xkoor, ykoor, zkoor )
497
498	!
499	!-- Create FLD file (being written on in close_file)
500	OPEN ( 32, FILE='PLOT3D_FLD', FORM='FORMATTED' )
501	openfile(32)%opened = .TRUE.
502
503	!
504	!-- Create flag file for compressed 3D output,
505	!-- influences output commands in mrun
506	IF ( do3d_compress ) THEN
507	OPEN ( 3, FILE='PLOT3D_COMPRESSED', FORM='FORMATTED' )
508	WRITE ( 3, '(1X)' )
509	CLOSE ( 3 )
510	ENDIF
511
512	ENDIF
513
514	ENDIF
515
516	!
517	!-- In case of data compression output of the coordinates of the
518	!-- corresponding partial array of a PE only once at the top of the file
519	IF ( avs_output .AND. do3d_compress ) THEN
520	WRITE ( 30 ) nxl-1, nxr+1, nys-1, nyn+1, nzb, nz_do3d
521	ENDIF
522
523	CASE ( 40:49 )
524
525	IF ( statistic_regions == 0 .AND. file_id == 40 ) THEN
526	suffix = ''
527	ELSE
528	WRITE ( suffix, '(''_'',I1)' ) file_id - 40
529	ENDIF
530	OPEN ( file_id, FILE='PLOT1D_DATA'//TRIM( coupling_char )// &
531	TRIM( suffix ), &
532	FORM='FORMATTED' )
533	!
534	!-- Write contents comments at the top of the file
535	WRITE ( file_id, 4000 ) TRIM( run_description_header ) // ' ' // &
536	TRIM( region( file_id - 40 ) )
537
538	CASE ( 50:59 )
539
540	IF ( statistic_regions == 0 .AND. file_id == 50 ) THEN
541	suffix = ''
542	ELSE
543	WRITE ( suffix, '(''_'',I1)' ) file_id - 50
544	ENDIF
545	OPEN ( file_id, FILE='PLOTTS_DATA'//TRIM( coupling_char )// &
546	TRIM( suffix ), &
547	FORM='FORMATTED', RECL=496 )
548	!
549	!-- Write PROFIL parameter file for output of time series
550	!-- NOTE: To be on the safe side, this output is done at the beginning of
551	!-- the model run (in case of collapse) and it is repeated in
552	!-- close_file, then, however, with value ranges for the coordinate
553	!-- systems
554	!
555	!-- Firstly determine the number of the coordinate systems to be drawn
556	cranz = 0
557	DO j = 1, 10
558	IF ( cross_ts_number_count(j) /= 0 ) cranz = cranz+1
559	ENDDO
560	rtext = '\1.0 ' // TRIM( run_description_header ) // ' ' // &
561	TRIM( region( file_id - 50 ) )
562	!
563	!-- Write RAHMEN parameter
564	OPEN ( 90, FILE='PLOTTS_PAR'//TRIM( coupling_char )// &
565	TRIM( suffix ), &
566	FORM='FORMATTED', DELIM='APOSTROPHE' )
567	WRITE ( 90, RAHMEN )
568	!
569	!-- Determine and write CROSS parameters for the individual coordinate
570	!-- systems
571	DO j = 1, 10
572	k = cross_ts_number_count(j)
573	IF ( k /= 0 ) THEN
574	!
575	!-- Store curve numbers, colours and line style
576	klist(1:k) = cross_ts_numbers(1:k,j)
577	klist(k+1:10) = 999999
578	cucol(1:k) = linecolors(1:k)
579	lstyle(1:k) = linestyles(1:k)
580	!
581	!-- Write CROSS parameter
582	WRITE ( 90, CROSS )
583
584	ENDIF
585	ENDDO
586
587	CLOSE ( 90 )
588	!
589	!-- Write all labels at the top of the data file, but only during the
590	!-- first run of a sequence of jobs. The following jobs copy the time
591	!-- series data to the bottom of that file.
592	IF ( runnr == 0 ) THEN
593	WRITE ( file_id, 5000 ) TRIM( run_description_header ) // &
594	' ' // TRIM( region( file_id - 50 ) )
595	ENDIF
596
597
598	CASE ( 80 )
599
600	IF ( myid_char == '' ) THEN
601	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
602	FORM='FORMATTED', POSITION='APPEND' )
603	ELSE
604	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
605	CALL local_system( 'mkdir PARTICLE_INFOS' // coupling_char )
606	ENDIF
607	#if defined( __parallel )
608	!
609	!-- Set a barrier in order to allow that thereafter all other
610	!-- processors in the directory created by PE0 can open their file.
611	!-- WARNING: The following barrier will lead to hanging jobs, if
612	!-- check_open is first called from routine
613	!-- allocate_prt_memory!
614	IF ( .NOT. openfile(80)%opened_before ) THEN
615	CALL MPI_BARRIER( comm2d, ierr )
616	ENDIF
617	#endif
618	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
619	myid_char, &
620	FORM='FORMATTED', POSITION='APPEND' )
621	ENDIF
622
623	IF ( .NOT. openfile(80)%opened_before ) THEN
624	WRITE ( 80, 8000 ) TRIM( run_description_header )
625	ENDIF
626
627	CASE ( 81 )
628
629	OPEN ( 81, FILE='PLOTSP_X_PAR'//coupling_char, FORM='FORMATTED', &
630	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
631
632	CASE ( 82 )
633
634	OPEN ( 82, FILE='PLOTSP_X_DATA'//coupling_char, FORM='FORMATTED', &
635	POSITION = 'APPEND' )
636
637	CASE ( 83 )
638
639	OPEN ( 83, FILE='PLOTSP_Y_PAR'//coupling_char, FORM='FORMATTED', &
640	DELIM='APOSTROPHE', RECL=1500, POSITION='APPEND' )
641
642	CASE ( 84 )
643
644	OPEN ( 84, FILE='PLOTSP_Y_DATA'//coupling_char, FORM='FORMATTED', &
645	POSITION='APPEND' )
646
647	CASE ( 85 )
648
649	IF ( myid_char == '' ) THEN
650	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
651	FORM='UNFORMATTED', POSITION='APPEND' )
652	ELSE
653	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
654	CALL local_system( 'mkdir PARTICLE_DATA' // coupling_char )
655	ENDIF
656	#if defined( __parallel )
657	!
658	!-- Set a barrier in order to allow that thereafter all other
659	!-- processors in the directory created by PE0 can open their file
660	CALL MPI_BARRIER( comm2d, ierr )
661	#endif
662	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
663	myid_char, &
664	FORM='UNFORMATTED', POSITION='APPEND' )
665	ENDIF
666
667	IF ( .NOT. openfile(85)%opened_before ) THEN
668	WRITE ( 85 ) run_description_header
669	!
670	!-- Attention: change version number whenever the output format on
671	!-- unit 85 is changed (see also in routine advec_particles)
672	rtext = 'data format version 3.0'
673	WRITE ( 85 ) rtext
674	WRITE ( 85 ) number_of_particle_groups, &
675	max_number_of_particle_groups
676	WRITE ( 85 ) particle_groups
677	ENDIF
678
679	#if defined( __netcdf )
680	CASE ( 101, 111 )
681	!
682	!-- Set filename depending on unit number
683	IF ( file_id == 101 ) THEN
684	filename = 'DATA_2D_XY_NETCDF' // coupling_char
685	av = 0
686	ELSE
687	filename = 'DATA_2D_XY_AV_NETCDF' // coupling_char
688	av = 1
689	ENDIF
690	!
691	!-- Inquire, if there is a NetCDF file from a previuos run. This should
692	!-- be opened for extension, if its dimensions and variables match the
693	!-- actual run.
694	INQUIRE( FILE=filename, EXIST=netcdf_extend )
695
696	IF ( netcdf_extend ) THEN
697	!
698	!-- Open an existing NetCDF file for output
699	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xy(av) )
700
701	CALL handle_netcdf_error( 'check_open', 20 )
702	!
703	!-- Read header information and set all ids. If there is a mismatch
704	!-- between the previuos and the actual run, netcdf_extend is returned
705	!-- as .FALSE.
706	CALL define_netcdf_header( 'xy', netcdf_extend, av )
707
708	!
709	!-- Remove the local file, if it can not be extended
710	IF ( .NOT. netcdf_extend ) THEN
711	nc_stat = NF90_CLOSE( id_set_xy(av) )
712	CALL handle_netcdf_error( 'check_open', 21 )
713	CALL local_system( 'rm ' // TRIM( filename ) )
714	ENDIF
715
716	ENDIF
717
718	IF ( .NOT. netcdf_extend ) THEN
719	!
720	!-- Create a new NetCDF output file
721	IF ( netcdf_64bit ) THEN
722	#if defined( __netcdf_64bit )
723	nc_stat = NF90_CREATE( filename, &
724	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
725	id_set_xy(av) )
726	#else
727	message_string = 'NetCDF: no 64-bit offset allowed on this machine'
728	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
729
730	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
731	#endif
732	ELSE
733	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xy(av) )
734	ENDIF
735	CALL handle_netcdf_error( 'check_open', 22 )
736	!
737	!-- Define the header
738	CALL define_netcdf_header( 'xy', netcdf_extend, av )
739
740	ENDIF
741
742	CASE ( 102, 112 )
743	!
744	!-- Set filename depending on unit number
745	IF ( file_id == 102 ) THEN
746	filename = 'DATA_2D_XZ_NETCDF' // coupling_char
747	av = 0
748	ELSE
749	filename = 'DATA_2D_XZ_AV_NETCDF' // coupling_char
750	av = 1
751	ENDIF
752	!
753	!-- Inquire, if there is a NetCDF file from a previuos run. This should
754	!-- be opened for extension, if its dimensions and variables match the
755	!-- actual run.
756	INQUIRE( FILE=filename, EXIST=netcdf_extend )
757
758	IF ( netcdf_extend ) THEN
759	!
760	!-- Open an existing NetCDF file for output
761	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_xz(av) )
762	CALL handle_netcdf_error( 'check_open', 23 )
763	!
764	!-- Read header information and set all ids. If there is a mismatch
765	!-- between the previuos and the actual run, netcdf_extend is returned
766	!-- as .FALSE.
767	CALL define_netcdf_header( 'xz', netcdf_extend, av )
768
769	!
770	!-- Remove the local file, if it can not be extended
771	IF ( .NOT. netcdf_extend ) THEN
772	nc_stat = NF90_CLOSE( id_set_xz(av) )
773	CALL handle_netcdf_error( 'check_open', 24 )
774	CALL local_system( 'rm ' // TRIM( filename ) )
775	ENDIF
776
777	ENDIF
778
779	IF ( .NOT. netcdf_extend ) THEN
780	!
781	!-- Create a new NetCDF output file
782	IF ( netcdf_64bit ) THEN
783	#if defined( __netcdf_64bit )
784	nc_stat = NF90_CREATE( filename, &
785	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
786	id_set_xz(av) )
787	#else
788	message_string = 'NetCDF: no 64-bit offset allowed on this machine'
789	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
790
791	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
792	#endif
793	ELSE
794	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_xz(av) )
795	ENDIF
796	CALL handle_netcdf_error( 'check_open', 25 )
797	!
798	!-- Define the header
799	CALL define_netcdf_header( 'xz', netcdf_extend, av )
800
801	ENDIF
802
803	CASE ( 103, 113 )
804	!
805	!-- Set filename depending on unit number
806	IF ( file_id == 103 ) THEN
807	filename = 'DATA_2D_YZ_NETCDF' // coupling_char
808	av = 0
809	ELSE
810	filename = 'DATA_2D_YZ_AV_NETCDF' // coupling_char
811	av = 1
812	ENDIF
813	!
814	!-- Inquire, if there is a NetCDF file from a previuos run. This should
815	!-- be opened for extension, if its dimensions and variables match the
816	!-- actual run.
817	INQUIRE( FILE=filename, EXIST=netcdf_extend )
818
819	IF ( netcdf_extend ) THEN
820	!
821	!-- Open an existing NetCDF file for output
822	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_yz(av) )
823	CALL handle_netcdf_error( 'check_open', 26 )
824	!
825	!-- Read header information and set all ids. If there is a mismatch
826	!-- between the previuos and the actual run, netcdf_extend is returned
827	!-- as .FALSE.
828	CALL define_netcdf_header( 'yz', netcdf_extend, av )
829
830	!
831	!-- Remove the local file, if it can not be extended
832	IF ( .NOT. netcdf_extend ) THEN
833	nc_stat = NF90_CLOSE( id_set_yz(av) )
834	CALL handle_netcdf_error( 'check_open', 27 )
835	CALL local_system( 'rm ' // TRIM( filename ) )
836	ENDIF
837
838	ENDIF
839
840	IF ( .NOT. netcdf_extend ) THEN
841	!
842	!-- Create a new NetCDF output file
843	IF ( netcdf_64bit ) THEN
844	#if defined( __netcdf_64bit )
845	nc_stat = NF90_CREATE( filename, &
846	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET), &
847	id_set_yz(av) )
848	#else
849	message_string = 'NetCDF: no 64-bit offset allowed on this machine'
850	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
851
852	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
853	#endif
854	ELSE
855	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_yz(av) )
856	ENDIF
857	CALL handle_netcdf_error( 'check_open', 28 )
858	!
859	!-- Define the header
860	CALL define_netcdf_header( 'yz', netcdf_extend, av )
861
862	ENDIF
863
864	CASE ( 104 )
865	!
866	!-- Set filename
867	filename = 'DATA_1D_PR_NETCDF' // coupling_char
868
869	!
870	!-- Inquire, if there is a NetCDF file from a previuos run. This should
871	!-- be opened for extension, if its variables match the actual run.
872	INQUIRE( FILE=filename, EXIST=netcdf_extend )
873
874	IF ( netcdf_extend ) THEN
875	!
876	!-- Open an existing NetCDF file for output
877	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pr )
878	CALL handle_netcdf_error( 'check_open', 29 )
879	!
880	!-- Read header information and set all ids. If there is a mismatch
881	!-- between the previuos and the actual run, netcdf_extend is returned
882	!-- as .FALSE.
883	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
884
885	!
886	!-- Remove the local file, if it can not be extended
887	IF ( .NOT. netcdf_extend ) THEN
888	nc_stat = NF90_CLOSE( id_set_pr )
889	CALL handle_netcdf_error( 'check_open', 30 )
890	CALL local_system( 'rm ' // TRIM( filename ) )
891	ENDIF
892
893	ENDIF
894
895	IF ( .NOT. netcdf_extend ) THEN
896	!
897	!-- Create a new NetCDF output file
898	IF ( netcdf_64bit ) THEN
899	#if defined( __netcdf_64bit )
900	nc_stat = NF90_CREATE( filename, &
901	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
902	id_set_pr )
903	#else
904	message_string = 'NetCDF: no 64-bit offset allowed on this machine'
905	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
906
907	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
908	#endif
909	ELSE
910	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pr )
911	ENDIF
912	CALL handle_netcdf_error( 'check_open', 31 )
913	!
914	!-- Define the header
915	CALL define_netcdf_header( 'pr', netcdf_extend, 0 )
916
917	ENDIF
918
919	CASE ( 105 )
920	!
921	!-- Set filename
922	filename = 'DATA_1D_TS_NETCDF' // coupling_char
923
924	!
925	!-- Inquire, if there is a NetCDF file from a previuos run. This should
926	!-- be opened for extension, if its variables match the actual run.
927	INQUIRE( FILE=filename, EXIST=netcdf_extend )
928
929	IF ( netcdf_extend ) THEN
930	!
931	!-- Open an existing NetCDF file for output
932	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_ts )
933	CALL handle_netcdf_error( 'check_open', 32 )
934	!
935	!-- Read header information and set all ids. If there is a mismatch
936	!-- between the previuos and the actual run, netcdf_extend is returned
937	!-- as .FALSE.
938	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
939
940	!
941	!-- Remove the local file, if it can not be extended
942	IF ( .NOT. netcdf_extend ) THEN
943	nc_stat = NF90_CLOSE( id_set_ts )
944	CALL handle_netcdf_error( 'check_open', 33 )
945	CALL local_system( 'rm ' // TRIM( filename ) )
946	ENDIF
947
948	ENDIF
949
950	IF ( .NOT. netcdf_extend ) THEN
951	!
952	!-- Create a new NetCDF output file
953	IF ( netcdf_64bit ) THEN
954	#if defined( __netcdf_64bit )
955	nc_stat = NF90_CREATE( filename, &
956	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
957	id_set_ts )
958	#else
959	message_string = 'NetCDF: no 64-bit offset allowed on this machine'
960	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
961
962	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
963	#endif
964	ELSE
965	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_ts )
966	ENDIF
967	CALL handle_netcdf_error( 'check_open', 34 )
968	!
969	!-- Define the header
970	CALL define_netcdf_header( 'ts', netcdf_extend, 0 )
971
972	ENDIF
973
974
975	CASE ( 106, 116 )
976	!
977	!-- Set filename depending on unit number
978	IF ( file_id == 106 ) THEN
979	filename = 'DATA_3D_NETCDF' // coupling_char
980	av = 0
981	ELSE
982	filename = 'DATA_3D_AV_NETCDF' // coupling_char
983	av = 1
984	ENDIF
985	!
986	!-- Inquire, if there is a NetCDF file from a previuos run. This should
987	!-- be opened for extension, if its dimensions and variables match the
988	!-- actual run.
989	INQUIRE( FILE=filename, EXIST=netcdf_extend )
990
991	IF ( netcdf_extend ) THEN
992	!
993	!-- Open an existing NetCDF file for output
994	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_3d(av) )
995	CALL handle_netcdf_error( 'check_open', 35 )
996	!
997	!-- Read header information and set all ids. If there is a mismatch
998	!-- between the previuos and the actual run, netcdf_extend is returned
999	!-- as .FALSE.
1000	CALL define_netcdf_header( '3d', netcdf_extend, av )
1001
1002	!
1003	!-- Remove the local file, if it can not be extended
1004	IF ( .NOT. netcdf_extend ) THEN
1005	nc_stat = NF90_CLOSE( id_set_3d(av) )
1006	CALL handle_netcdf_error( 'check_open', 36 )
1007	CALL local_system('rm ' // TRIM( filename ) )
1008	ENDIF
1009
1010	ENDIF
1011
1012	IF ( .NOT. netcdf_extend ) THEN
1013	!
1014	!-- Create a new NetCDF output file
1015	IF ( netcdf_64bit_3d ) THEN
1016	#if defined( __netcdf_64bit )
1017	nc_stat = NF90_CREATE( filename, &
1018	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1019	id_set_3d(av) )
1020	#else
1021	message_string = 'NetCDF: no 64-bit offset allowed on this machine'
1022	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
1023
1024	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1025	#endif
1026	ELSE
1027	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_3d(av) )
1028	ENDIF
1029	CALL handle_netcdf_error( 'check_open', 37 )
1030	!
1031	!-- Define the header
1032	CALL define_netcdf_header( '3d', netcdf_extend, av )
1033
1034	ENDIF
1035
1036
1037	CASE ( 107 )
1038	!
1039	!-- Set filename
1040	filename = 'DATA_1D_SP_NETCDF' // coupling_char
1041
1042	!
1043	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1044	!-- be opened for extension, if its variables match the actual run.
1045	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1046
1047	IF ( netcdf_extend ) THEN
1048	!
1049	!-- Open an existing NetCDF file for output
1050	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_sp )
1051	CALL handle_netcdf_error( 'check_open', 38 )
1052
1053	!
1054	!-- Read header information and set all ids. If there is a mismatch
1055	!-- between the previuos and the actual run, netcdf_extend is returned
1056	!-- as .FALSE.
1057	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1058
1059	!
1060	!-- Remove the local file, if it can not be extended
1061	IF ( .NOT. netcdf_extend ) THEN
1062	nc_stat = NF90_CLOSE( id_set_sp )
1063	CALL handle_netcdf_error( 'check_open', 39 )
1064	CALL local_system( 'rm ' // TRIM( filename ) )
1065	ENDIF
1066
1067	ENDIF
1068
1069	IF ( .NOT. netcdf_extend ) THEN
1070	!
1071	!-- Create a new NetCDF output file
1072	IF ( netcdf_64bit ) THEN
1073	#if defined( __netcdf_64bit )
1074	nc_stat = NF90_CREATE( filename, &
1075	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1076	id_set_sp )
1077	#else
1078	message_string = 'NetCDF: no 64-bit offset allowed on this machine'
1079	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
1080
1081	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1082	#endif
1083	ELSE
1084	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_sp )
1085	ENDIF
1086	CALL handle_netcdf_error( 'check_open', 40 )
1087	!
1088	!-- Define the header
1089	CALL define_netcdf_header( 'sp', netcdf_extend, 0 )
1090
1091	ENDIF
1092
1093
1094	CASE ( 108 )
1095
1096	IF ( myid_char == '' ) THEN
1097	filename = 'DATA_PRT_NETCDF' // coupling_char
1098	ELSE
1099	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1100	myid_char
1101	ENDIF
1102	!
1103	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1104	!-- be opened for extension, if its variables match the actual run.
1105	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1106
1107	IF ( netcdf_extend ) THEN
1108	!
1109	!-- Open an existing NetCDF file for output
1110	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_prt )
1111	CALL handle_netcdf_error( 'check_open', 41 )
1112	!
1113	!-- Read header information and set all ids. If there is a mismatch
1114	!-- between the previuos and the actual run, netcdf_extend is returned
1115	!-- as .FALSE.
1116	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1117
1118	!
1119	!-- Remove the local file, if it can not be extended
1120	IF ( .NOT. netcdf_extend ) THEN
1121	nc_stat = NF90_CLOSE( id_set_prt )
1122	CALL handle_netcdf_error( 'check_open', 42 )
1123	CALL local_system( 'rm ' // filename )
1124	ENDIF
1125
1126	ENDIF
1127
1128	IF ( .NOT. netcdf_extend ) THEN
1129
1130	!
1131	!-- For runs on multiple processors create the subdirectory
1132	IF ( myid_char /= '' ) THEN
1133	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1134	THEN ! needs modification in case of non-extendable sets
1135	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1136	TRIM( coupling_char ) // '/' )
1137	ENDIF
1138	#if defined( __parallel )
1139	!
1140	!-- Set a barrier in order to allow that all other processors in the
1141	!-- directory created by PE0 can open their file
1142	CALL MPI_BARRIER( comm2d, ierr )
1143	#endif
1144	ENDIF
1145
1146	!
1147	!-- Create a new NetCDF output file
1148	IF ( netcdf_64bit ) THEN
1149	#if defined( __netcdf_64bit )
1150	nc_stat = NF90_CREATE( filename, &
1151	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1152	id_set_prt )
1153	#else
1154	message_string = 'NetCDF: no 64-bit offset allowed on this machine'
1155	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
1156
1157	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1158	#endif
1159	ELSE
1160	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_prt )
1161	ENDIF
1162	CALL handle_netcdf_error( 'check_open', 43 )
1163
1164	!
1165	!-- Define the header
1166	CALL define_netcdf_header( 'pt', netcdf_extend, 0 )
1167
1168	ENDIF
1169
1170	CASE ( 109 )
1171	!
1172	!-- Set filename
1173	filename = 'DATA_1D_PTS_NETCDF' // coupling_char
1174
1175	!
1176	!-- Inquire, if there is a NetCDF file from a previuos run. This should
1177	!-- be opened for extension, if its variables match the actual run.
1178	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1179
1180	IF ( netcdf_extend ) THEN
1181	!
1182	!-- Open an existing NetCDF file for output
1183	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set_pts )
1184	CALL handle_netcdf_error( 'check_open', 393 )
1185	!
1186	!-- Read header information and set all ids. If there is a mismatch
1187	!-- between the previuos and the actual run, netcdf_extend is returned
1188	!-- as .FALSE.
1189	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1190
1191	!
1192	!-- Remove the local file, if it can not be extended
1193	IF ( .NOT. netcdf_extend ) THEN
1194	nc_stat = NF90_CLOSE( id_set_pts )
1195	CALL handle_netcdf_error( 'check_open', 394 )
1196	CALL local_system( 'rm ' // TRIM( filename ) )
1197	ENDIF
1198
1199	ENDIF
1200
1201	IF ( .NOT. netcdf_extend ) THEN
1202	!
1203	!-- Create a new NetCDF output file
1204	IF ( netcdf_64bit ) THEN
1205	#if defined( __netcdf_64bit )
1206	nc_stat = NF90_CREATE( filename, &
1207	OR( NF90_NOCLOBBER, NF90_64BIT_OFFSET ),&
1208	id_set_pts )
1209	#else
1210	message_string = 'NetCDF: no 64-bit offset allowed on this machine'
1211	CALL message( 'check_open', 'PA0171', 0, 1, 0, 6, 0 )
1212
1213	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1214	#endif
1215	ELSE
1216	nc_stat = NF90_CREATE( filename, NF90_NOCLOBBER, id_set_pts )
1217	ENDIF
1218	CALL handle_netcdf_error( 'check_open', 395 )
1219	!
1220	!-- Define the header
1221	CALL define_netcdf_header( 'ps', netcdf_extend, 0 )
1222
1223	ENDIF
1224	#else
1225
1226	CASE ( 101:109, 111:113, 116 )
1227
1228	!
1229	!-- Nothing is done in case of missing netcdf support
1230	RETURN
1231
1232	#endif
1233
1234	CASE DEFAULT
1235
1236	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1237	CALL message( 'check_open', 'PA0172', 2, 2, 0, 6, 0 )
1238
1239	END SELECT
1240
1241	!
1242	!-- Set open flag
1243	openfile(file_id)%opened = .TRUE.
1244
1245	!
1246	!-- Formats
1247	3300 FORMAT ('#'/ &
1248	'coord 1 file=',A,' filetype=unformatted'/ &
1249	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1250	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1251	'#')
1252	4000 FORMAT ('# ',A)
1253	5000 FORMAT ('# ',A/ &
1254	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1255	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1256	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1257	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1258	8000 FORMAT (A/ &
1259	' step time # of parts lPE sent/recv rPE sent/recv ',&
1260	'sPE sent/recv nPE sent/recv max # of parts'/ &
1261	103('-'))
1262
1263	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |