Home

Context Navigation

source: palm/trunk/SOURCE/check_open.f90 @ 2039

Last change on this file since 2039 was 2039, checked in by gronemeier, 8 years ago
Increased the number of possible statistic regions to 99
Property svn:keywords set to `Id`
File size: 44.3 KB

Line
1	!> @file check_open.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU fGeneral Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2016 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	! Removed open of file 'PLOTTS_DATA' ( CASE(50:59) ) as it is no longer needed
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_open.f90 2039 2016-10-26 16:53:23Z gronemeier $
27	!
28	! 2000 2016-08-20 18:09:15Z knoop
29	! Forced header and separation lines into 80 columns
30	!
31	! 1988 2016-08-10 14:49:06Z gronemeier
32	! informative message added if files cannot be opened in newly created directory
33	!
34	! 1986 2016-08-10 14:07:17Z gronemeier
35	! Bugfix: check if output can be opened in newly created directory. If not
36	! wait one second and try again.
37	!
38	! 1974 2016-07-26 08:43:25Z gronemeier
39	! Bugfix: MPI barriers after deleting non-extendable files must only be called
40	! in case of parallel I/O
41	!
42	! 1957 2016-07-07 10:43:48Z suehring
43	! flight module added
44	!
45	! 1804 2016-04-05 16:30:18Z maronga
46	! Removed code for parameter file check (__check)
47	!
48	! 1783 2016-03-06 18:36:17Z raasch
49	! name change of netcdf routines and module + related changes
50	!
51	! 1779 2016-03-03 08:01:28Z raasch
52	! coupling_char is trimmed at every place it occurs, because it can have
53	! different length now
54	!
55	! 1745 2016-02-05 13:06:51Z gronemeier
56	! Bugfix: added MPI barrier after deleting existing non-extendable file by PE0
57	!
58	! 1682 2015-10-07 23:56:08Z knoop
59	! Code annotations made doxygen readable
60	!
61	! 1551 2015-03-03 14:18:16Z maronga
62	! Removed redundant output for combine_plot_fields
63	!
64	! 1468 2014-09-24 14:06:57Z maronga
65	! Adapted for use on up to 6-digit processor cores
66	! Added file unit 117 (PROGRESS)
67	!
68	! 1359 2014-04-11 17:15:14Z hoffmann
69	! Format of particle exchange statistics extended to reasonable numbers of
70	! particles.
71	!
72	! 1353 2014-04-08 15:21:23Z heinze
73	! REAL constants provided with KIND-attribute,
74	! declaration for unused variables xkoor, ykoor, zkoor removed
75	!
76	! 1327 2014-03-21 11:00:16Z raasch
77	! parts concerning iso2d and avs output removed
78	!
79	! 1320 2014-03-20 08:40:49Z raasch
80	! ONLY-attribute added to USE-statements,
81	! kind-parameters added to all INTEGER and REAL declaration statements,
82	! kinds are defined in new module kinds,
83	! old module precision_kind is removed,
84	! revision history before 2012 removed,
85	! comment fields (!:) to be used for variable explanations added to
86	! all variable declaration statements
87	!
88	! 1106 2013-03-04 05:31:38Z raasch
89	! array_kind renamed precision_kind
90	!
91	! 1092 2013-02-02 11:24:22Z raasch
92	! unused variables removed
93	!
94	! 1036 2012-10-22 13:43:42Z raasch
95	! code put under GPL (PALM 3.9)
96	!
97	! 1031 2012-10-19 14:35:30Z raasch
98	! netCDF4 without parallel file support implemented,
99	! opening of netCDF files are done by new routines create_netcdf_file and
100	! open_write_netcdf_file
101	!
102	! 964 2012-07-26 09:14:24Z raasch
103	! old profil-units (40:49) removed,
104	! append feature removed from unit 14
105	!
106	! 849 2012-03-15 10:35:09Z raasch
107	! comment changed
108	!
109	! 809 2012-01-30 13:32:58Z maronga
110	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
111	!
112	! 807 2012-01-25 11:53:51Z maronga
113	! New cpp directive "__check" implemented which is used by check_namelist_files
114	!
115	! Revision 1.1 1997/08/11 06:10:55 raasch
116	! Initial revision
117	!
118	!
119	! Description:
120	! ------------
121	!> Check if file unit is open. If not, open file and, if necessary, write a
122	!> header or start other initializing actions, respectively.
123	!------------------------------------------------------------------------------!
124	SUBROUTINE check_open( file_id )
125
126
127	USE arrays_3d, &
128	ONLY: zu
129
130	USE control_parameters, &
131	ONLY: avs_data_file, coupling_char, data_output_2d_on_each_pe, host, &
132	max_masks, message_string, mid, nz_do3d, openfile, &
133	return_addres, return_username, run_description_header, runnr
134
135	USE grid_variables, &
136	ONLY: dx, dy
137
138	USE indices, &
139	ONLY: nbgp, nx, nxl, nxr, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
140
141	USE kinds
142
143	#if defined( __netcdf )
144	USE NETCDF
145	#endif
146
147	USE netcdf_interface, &
148	ONLY: id_set_fl, id_set_mask, id_set_pr, id_set_prt, id_set_pts, &
149	id_set_sp, id_set_ts, id_set_xy, id_set_xz, id_set_yz, &
150	id_set_3d, nc_stat, netcdf_create_file, netcdf_data_format, &
151	netcdf_define_header, netcdf_handle_error, netcdf_open_write_file
152
153	USE particle_attributes, &
154	ONLY: max_number_of_particle_groups, number_of_particle_groups, &
155	particle_groups
156
157	USE pegrid
158
159	USE posix_calls_from_fortran, &
160	ONLY: fortran_sleep
161
162	USE profil_parameter, &
163	ONLY: cross_ts_numbers, cross_ts_number_count
164
165
166	IMPLICIT NONE
167
168	CHARACTER (LEN=2) :: mask_char !<
169	CHARACTER (LEN=2) :: suffix !<
170	CHARACTER (LEN=20) :: xtext = 'time in s' !<
171	CHARACTER (LEN=30) :: filename !<
172	CHARACTER (LEN=40) :: avs_coor_file !<
173	CHARACTER (LEN=40) :: avs_coor_file_localname !<
174	CHARACTER (LEN=40) :: avs_data_file_localname !<
175	CHARACTER (LEN=80) :: rtext !<
176	CHARACTER (LEN=100) :: avs_coor_file_catalog !<
177	CHARACTER (LEN=100) :: avs_data_file_catalog !<
178	CHARACTER (LEN=100) :: batch_scp !<
179	CHARACTER (LEN=100) :: line !<
180	CHARACTER (LEN=400) :: command !<
181
182	INTEGER(iwp) :: av !<
183	INTEGER(iwp) :: numline = 1 !<
184	INTEGER(iwp) :: cranz !<
185	INTEGER(iwp) :: file_id !<
186	INTEGER(iwp) :: i !<
187	INTEGER(iwp) :: iaddres !<
188	INTEGER(iwp) :: ioerr !< IOSTAT flag for IO-commands ( 0 = no error )
189	INTEGER(iwp) :: iusern !<
190	INTEGER(iwp) :: j !<
191	INTEGER(iwp) :: k !<
192	INTEGER(iwp) :: legpos = 1 !<
193	INTEGER(iwp) :: timodex = 1 !<
194
195	INTEGER(iwp), DIMENSION(10) :: klist !<
196
197	LOGICAL :: avs_coor_file_found = .FALSE. !<
198	LOGICAL :: avs_data_file_found = .FALSE. !<
199	LOGICAL :: datleg = .TRUE. !<
200	LOGICAL :: get_filenames !<
201	LOGICAL :: grid = .TRUE. !<
202	LOGICAL :: netcdf_extend !<
203	LOGICAL :: rand = .TRUE. !<
204	LOGICAL :: swap = .TRUE. !<
205	LOGICAL :: twoxa = .TRUE. !<
206	LOGICAL :: twoya = .TRUE. !<
207
208	REAL(wp) :: ansx = -999.999_wp !<
209	REAL(wp) :: ansy = -999.999_wp !<
210	REAL(wp) :: gwid = 0.1_wp !<
211	REAL(wp) :: rlegfak = 1.5_wp !<
212	REAL(wp) :: sizex = 250.0_wp !<
213	REAL(wp) :: sizey = 40.0_wp !<
214	REAL(wp) :: texfac = 1.5_wp !<
215
216	REAL(wp), DIMENSION(:), ALLOCATABLE :: eta !<
217	REAL(wp), DIMENSION(:), ALLOCATABLE :: ho !<
218	REAL(wp), DIMENSION(:), ALLOCATABLE :: hu !<
219
220
221
222	NAMELIST /RAHMEN/ numline, cranz, datleg, rtext, swap
223	NAMELIST /CROSS/ ansx, ansy, grid, gwid, klist, legpos, &
224	rand, rlegfak, sizex, sizey, texfac, &
225	timodex, twoxa, twoya, xtext
226
227
228	!
229	!-- Immediate return if file already open
230	IF ( openfile(file_id)%opened ) RETURN
231
232	!
233	!-- Only certain files are allowed to be re-opened
234	!-- NOTE: some of the other files perhaps also could be re-opened, but it
235	!-- has not been checked so far, if it works!
236	IF ( openfile(file_id)%opened_before ) THEN
237	SELECT CASE ( file_id )
238	CASE ( 13, 14, 21, 22, 23, 80:85, 117 )
239	IF ( file_id == 14 .AND. openfile(file_id)%opened_before ) THEN
240	message_string = 're-open of unit ' // &
241	'14 is not verified. Please check results!'
242	CALL message( 'check_open', 'PA0165', 0, 1, 0, 6, 0 )
243	ENDIF
244
245	CASE DEFAULT
246	WRITE( message_string, * ) 're-opening of file-id ', file_id, &
247	' is not allowed'
248	CALL message( 'check_open', 'PA0166', 0, 1, 0, 6, 0 )
249
250	RETURN
251
252	END SELECT
253	ENDIF
254
255	!
256	!-- Check if file may be opened on the relevant PE
257	SELECT CASE ( file_id )
258
259	CASE ( 15, 16, 17, 18, 19, 50:59, 81:84, 104:105, 107, 109, 117 )
260
261	IF ( myid /= 0 ) THEN
262	WRITE( message_string, * ) 'opening file-id ',file_id, &
263	' not allowed for PE ',myid
264	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
265	ENDIF
266
267	CASE ( 101:103, 106, 111:113, 116, 201:200+2*max_masks )
268
269	IF ( netcdf_data_format < 5 ) THEN
270
271	IF ( myid /= 0 ) THEN
272	WRITE( message_string, * ) 'opening file-id ',file_id, &
273	' not allowed for PE ',myid
274	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
275	ENDIF
276
277	ENDIF
278
279	CASE ( 21, 22, 23 )
280
281	IF ( .NOT. data_output_2d_on_each_pe ) THEN
282	IF ( myid /= 0 ) THEN
283	WRITE( message_string, * ) 'opening file-id ',file_id, &
284	' not allowed for PE ',myid
285	CALL message( 'check_open', 'PA0167', 2, 2, -1, 6, 1 )
286	END IF
287	ENDIF
288
289	CASE ( 27, 28, 29, 31, 33, 71:73, 90:99 )
290
291	!
292	!-- File-ids that are used temporarily in other routines
293	WRITE( message_string, * ) 'opening file-id ',file_id, &
294	' is not allowed since it is used otherwise'
295	CALL message( 'check_open', 'PA0168', 0, 1, 0, 6, 0 )
296
297	END SELECT
298
299	!
300	!-- Open relevant files
301	SELECT CASE ( file_id )
302
303	CASE ( 11 )
304
305	OPEN ( 11, FILE='PARIN'//TRIM( coupling_char ), FORM='FORMATTED', &
306	STATUS='OLD' )
307
308	CASE ( 13 )
309
310	IF ( myid_char == '' ) THEN
311	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//myid_char, &
312	FORM='UNFORMATTED', STATUS='OLD' )
313	ELSE
314	!
315	!-- First opening of unit 13 openes file _000000 on all PEs because
316	!-- only this file contains the global variables
317	IF ( .NOT. openfile(file_id)%opened_before ) THEN
318	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/_000000', &
319	FORM='UNFORMATTED', STATUS='OLD' )
320	ELSE
321	OPEN ( 13, FILE='BININ'//TRIM( coupling_char )//'/'// &
322	myid_char, FORM='UNFORMATTED', STATUS='OLD' )
323	ENDIF
324	ENDIF
325
326	CASE ( 14 )
327
328	IF ( myid_char == '' ) THEN
329	OPEN ( 14, FILE='BINOUT'//TRIM( coupling_char )//myid_char, &
330	FORM='UNFORMATTED', POSITION='APPEND' )
331	ELSE
332	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
333	CALL local_system( 'mkdir BINOUT' // TRIM( coupling_char ) )
334	ENDIF
335	#if defined( __parallel )
336	!
337	!-- Set a barrier in order to allow that all other processors in the
338	!-- directory created by PE0 can open their file
339	CALL MPI_BARRIER( comm2d, ierr )
340	#endif
341	ioerr = 1
342	DO WHILE ( ioerr /= 0 )
343	OPEN ( 14, FILE='BINOUT'//TRIM(coupling_char)//'/'//myid_char, &
344	FORM='UNFORMATTED', IOSTAT=ioerr )
345	IF ( ioerr /= 0 ) THEN
346	WRITE( 9, * ) '*** could not open "BINOUT'// &
347	TRIM(coupling_char)//'/'//myid_char// &
348	'"! Trying again in 1 sec.'
349	CALL fortran_sleep( 1 )
350	ENDIF
351	ENDDO
352
353	ENDIF
354
355	CASE ( 15 )
356
357	OPEN ( 15, FILE='RUN_CONTROL'//TRIM( coupling_char ), &
358	FORM='FORMATTED' )
359
360	CASE ( 16 )
361
362	OPEN ( 16, FILE='LIST_PROFIL'//TRIM( coupling_char ), &
363	FORM='FORMATTED' )
364
365	CASE ( 17 )
366
367	OPEN ( 17, FILE='LIST_PROFIL_1D'//TRIM( coupling_char ), &
368	FORM='FORMATTED' )
369
370	CASE ( 18 )
371
372	OPEN ( 18, FILE='CPU_MEASURES'//TRIM( coupling_char ), &
373	FORM='FORMATTED' )
374
375	CASE ( 19 )
376
377	OPEN ( 19, FILE='HEADER'//TRIM( coupling_char ), FORM='FORMATTED' )
378
379	CASE ( 20 )
380
381	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
382	CALL local_system( 'mkdir DATA_LOG' // TRIM( coupling_char ) )
383	ENDIF
384	IF ( myid_char == '' ) THEN
385	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/_000000', &
386	FORM='UNFORMATTED', POSITION='APPEND' )
387	ELSE
388	#if defined( __parallel )
389	!
390	!-- Set a barrier in order to allow that all other processors in the
391	!-- directory created by PE0 can open their file
392	CALL MPI_BARRIER( comm2d, ierr )
393	#endif
394	ioerr = 1
395	DO WHILE ( ioerr /= 0 )
396	OPEN ( 20, FILE='DATA_LOG'//TRIM( coupling_char )//'/'// &
397	myid_char, FORM='UNFORMATTED', POSITION='APPEND', &
398	IOSTAT=ioerr )
399	IF ( ioerr /= 0 ) THEN
400	WRITE( 9, * ) '*** could not open "DATA_LOG'// &
401	TRIM( coupling_char )//'/'//myid_char// &
402	'"! Trying again in 1 sec.'
403	CALL fortran_sleep( 1 )
404	ENDIF
405	ENDDO
406
407	ENDIF
408
409	CASE ( 21 )
410
411	IF ( data_output_2d_on_each_pe ) THEN
412	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char )//myid_char, &
413	FORM='UNFORMATTED', POSITION='APPEND' )
414	ELSE
415	OPEN ( 21, FILE='PLOT2D_XY'//TRIM( coupling_char ), &
416	FORM='UNFORMATTED', POSITION='APPEND' )
417	ENDIF
418
419	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
420	!
421	!-- Output for combine_plot_fields
422	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
423	WRITE (21) -nbgp, nx+nbgp, -nbgp, ny+nbgp ! total array size
424	WRITE (21) 0, nx+1, 0, ny+1 ! output part
425	ENDIF
426	!
427	!-- Determine and write ISO2D coordiante header
428	ALLOCATE( eta(0:ny+1), ho(0:nx+1), hu(0:nx+1) )
429	hu = 0.0_wp
430	ho = (ny+1) * dy
431	DO i = 1, ny
432	eta(i) = REAL( i ) / ( ny + 1.0_wp )
433	ENDDO
434	eta(0) = 0.0_wp
435	eta(ny+1) = 1.0_wp
436
437	WRITE (21) dx,eta,hu,ho
438	DEALLOCATE( eta, ho, hu )
439
440	ENDIF
441
442	CASE ( 22 )
443
444	IF ( data_output_2d_on_each_pe ) THEN
445	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char )//myid_char, &
446	FORM='UNFORMATTED', POSITION='APPEND' )
447	ELSE
448	OPEN ( 22, FILE='PLOT2D_XZ'//TRIM( coupling_char ), &
449	FORM='UNFORMATTED', POSITION='APPEND' )
450	ENDIF
451
452	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
453	!
454	!-- Output for combine_plot_fields
455	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
456	WRITE (22) -nbgp, nx+nbgp, 0, nz+1 ! total array size
457	WRITE (22) 0, nx+1, 0, nz+1 ! output part
458	ENDIF
459	!
460	!-- Determine and write ISO2D coordinate header
461	ALLOCATE( eta(0:nz+1), ho(0:nx+1), hu(0:nx+1) )
462	hu = 0.0_wp
463	ho = zu(nz+1)
464	DO i = 1, nz
465	eta(i) = REAL( zu(i) ) / zu(nz+1)
466	ENDDO
467	eta(0) = 0.0_wp
468	eta(nz+1) = 1.0_wp
469
470	WRITE (22) dx,eta,hu,ho
471	DEALLOCATE( eta, ho, hu )
472
473	ENDIF
474
475	CASE ( 23 )
476
477	IF ( data_output_2d_on_each_pe ) THEN
478	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char )//myid_char, &
479	FORM='UNFORMATTED', POSITION='APPEND' )
480	ELSE
481	OPEN ( 23, FILE='PLOT2D_YZ'//TRIM( coupling_char ), &
482	FORM='UNFORMATTED', POSITION='APPEND' )
483	ENDIF
484
485	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) THEN
486	!
487	!-- Output for combine_plot_fields
488	IF ( data_output_2d_on_each_pe .AND. myid_char /= '' ) THEN
489	WRITE (23) -nbgp, ny+nbgp, 0, nz+1 ! total array size
490	WRITE (23) 0, ny+1, 0, nz+1 ! output part
491	ENDIF
492	!
493	!-- Determine and write ISO2D coordiante header
494	ALLOCATE( eta(0:nz+1), ho(0:ny+1), hu(0:ny+1) )
495	hu = 0.0_wp
496	ho = zu(nz+1)
497	DO i = 1, nz
498	eta(i) = REAL( zu(i) ) / zu(nz+1)
499	ENDDO
500	eta(0) = 0.0_wp
501	eta(nz+1) = 1.0_wp
502
503	WRITE (23) dx,eta,hu,ho
504	DEALLOCATE( eta, ho, hu )
505
506	ENDIF
507
508	CASE ( 30 )
509
510	OPEN ( 30, FILE='PLOT3D_DATA'//TRIM( coupling_char )//myid_char, &
511	FORM='UNFORMATTED' )
512	!
513	!-- Write coordinate file for AVS
514	IF ( myid == 0 ) THEN
515	#if defined( __parallel )
516	!
517	!-- Specifications for combine_plot_fields
518	WRITE ( 30 ) -nbgp,nx+nbgp,-nbgp,ny+nbgp
519	WRITE ( 30 ) 0,nx+1,0,ny+1,0,nz_do3d
520	#endif
521	ENDIF
522
523	CASE ( 80 )
524
525	IF ( myid_char == '' ) THEN
526	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM(coupling_char)//myid_char, &
527	FORM='FORMATTED', POSITION='APPEND' )
528	ELSE
529	IF ( myid == 0 .AND. .NOT. openfile(80)%opened_before ) THEN
530	CALL local_system( 'mkdir PARTICLE_INFOS' // &
531	TRIM( coupling_char ) )
532	ENDIF
533	#if defined( __parallel )
534	!
535	!-- Set a barrier in order to allow that thereafter all other
536	!-- processors in the directory created by PE0 can open their file.
537	!-- WARNING: The following barrier will lead to hanging jobs, if
538	!-- check_open is first called from routine
539	!-- allocate_prt_memory!
540	IF ( .NOT. openfile(80)%opened_before ) THEN
541	CALL MPI_BARRIER( comm2d, ierr )
542	ENDIF
543	#endif
544	OPEN ( 80, FILE='PARTICLE_INFOS'//TRIM( coupling_char )//'/'// &
545	myid_char, &
546	FORM='FORMATTED', POSITION='APPEND' )
547	ENDIF
548
549	IF ( .NOT. openfile(80)%opened_before ) THEN
550	WRITE ( 80, 8000 ) TRIM( run_description_header )
551	ENDIF
552
553	CASE ( 81 )
554
555	OPEN ( 81, FILE='PLOTSP_X_PAR'//TRIM( coupling_char ), &
556	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
557	POSITION='APPEND' )
558
559	CASE ( 82 )
560
561	OPEN ( 82, FILE='PLOTSP_X_DATA'//TRIM( coupling_char ), &
562	FORM='FORMATTED', POSITION = 'APPEND' )
563
564	CASE ( 83 )
565
566	OPEN ( 83, FILE='PLOTSP_Y_PAR'//TRIM( coupling_char ), &
567	FORM='FORMATTED', DELIM='APOSTROPHE', RECL=1500, &
568	POSITION='APPEND' )
569
570	CASE ( 84 )
571
572	OPEN ( 84, FILE='PLOTSP_Y_DATA'//TRIM( coupling_char ), &
573	FORM='FORMATTED', POSITION='APPEND' )
574
575	CASE ( 85 )
576
577	IF ( myid_char == '' ) THEN
578	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM(coupling_char)//myid_char, &
579	FORM='UNFORMATTED', POSITION='APPEND' )
580	ELSE
581	IF ( myid == 0 .AND. .NOT. openfile(85)%opened_before ) THEN
582	CALL local_system( 'mkdir PARTICLE_DATA' // &
583	TRIM( coupling_char ) )
584	ENDIF
585	#if defined( __parallel )
586	!
587	!-- Set a barrier in order to allow that thereafter all other
588	!-- processors in the directory created by PE0 can open their file
589	CALL MPI_BARRIER( comm2d, ierr )
590	#endif
591	ioerr = 1
592	DO WHILE ( ioerr /= 0 )
593	OPEN ( 85, FILE='PARTICLE_DATA'//TRIM( coupling_char )//'/'// &
594	myid_char, &
595	FORM='UNFORMATTED', POSITION='APPEND', IOSTAT=ioerr )
596	IF ( ioerr /= 0 ) THEN
597	WRITE( 9, * ) '*** could not open "PARTICLE_DATA'// &
598	TRIM( coupling_char )//'/'//myid_char// &
599	'"! Trying again in 1 sec.'
600	CALL fortran_sleep( 1 )
601	ENDIF
602	ENDDO
603
604	ENDIF
605
606	IF ( .NOT. openfile(85)%opened_before ) THEN
607	WRITE ( 85 ) run_description_header
608	!
609	!-- Attention: change version number whenever the output format on
610	!-- unit 85 is changed (see also in routine
611	!-- lpm_data_output_particles)
612	rtext = 'data format version 3.1'
613	WRITE ( 85 ) rtext
614	WRITE ( 85 ) number_of_particle_groups, &
615	max_number_of_particle_groups
616	WRITE ( 85 ) particle_groups
617	WRITE ( 85 ) nxl, nxr, nys, nyn, nzb, nzt, nbgp
618	ENDIF
619
620	#if defined( __netcdf )
621	CASE ( 101, 111 )
622	!
623	!-- Set filename depending on unit number
624	IF ( file_id == 101 ) THEN
625	filename = 'DATA_2D_XY_NETCDF' // TRIM( coupling_char )
626	av = 0
627	ELSE
628	filename = 'DATA_2D_XY_AV_NETCDF' // TRIM( coupling_char )
629	av = 1
630	ENDIF
631	!
632	!-- Inquire, if there is a netCDF file from a previuos run. This should
633	!-- be opened for extension, if its dimensions and variables match the
634	!-- actual run.
635	INQUIRE( FILE=filename, EXIST=netcdf_extend )
636	IF ( netcdf_extend ) THEN
637	!
638	!-- Open an existing netCDF file for output
639	CALL netcdf_open_write_file( filename, id_set_xy(av), .TRUE., 20 )
640	!
641	!-- Read header information and set all ids. If there is a mismatch
642	!-- between the previuos and the actual run, netcdf_extend is returned
643	!-- as .FALSE.
644	CALL netcdf_define_header( 'xy', netcdf_extend, av )
645
646	!
647	!-- Remove the local file, if it can not be extended
648	IF ( .NOT. netcdf_extend ) THEN
649	nc_stat = NF90_CLOSE( id_set_xy(av) )
650	CALL netcdf_handle_error( 'check_open', 21 )
651	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
652	#if defined( __parallel )
653	!
654	!-- Set a barrier in order to assure that PE0 deleted the old file
655	!-- before any other processor tries to open a new file.
656	!-- Barrier is only needed in case of parallel I/O
657	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
658	#endif
659	ENDIF
660
661	ENDIF
662
663	IF ( .NOT. netcdf_extend ) THEN
664	!
665	!-- Create a new netCDF output file with requested netCDF format
666	CALL netcdf_create_file( filename, id_set_xy(av), .TRUE., 22 )
667
668	!
669	!-- Define the header
670	CALL netcdf_define_header( 'xy', netcdf_extend, av )
671
672	!
673	!-- In case of parallel netCDF output, create flag file which tells
674	!-- combine_plot_fields that nothing is to do.
675	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
676	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XY' )
677	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
678	CLOSE( 99 )
679	ENDIF
680
681	ENDIF
682
683	CASE ( 102, 112 )
684	!
685	!-- Set filename depending on unit number
686	IF ( file_id == 102 ) THEN
687	filename = 'DATA_2D_XZ_NETCDF' // TRIM( coupling_char )
688	av = 0
689	ELSE
690	filename = 'DATA_2D_XZ_AV_NETCDF' // TRIM( coupling_char )
691	av = 1
692	ENDIF
693	!
694	!-- Inquire, if there is a netCDF file from a previuos run. This should
695	!-- be opened for extension, if its dimensions and variables match the
696	!-- actual run.
697	INQUIRE( FILE=filename, EXIST=netcdf_extend )
698
699	IF ( netcdf_extend ) THEN
700	!
701	!-- Open an existing netCDF file for output
702	CALL netcdf_open_write_file( filename, id_set_xz(av), .TRUE., 23 )
703	!
704	!-- Read header information and set all ids. If there is a mismatch
705	!-- between the previuos and the actual run, netcdf_extend is returned
706	!-- as .FALSE.
707	CALL netcdf_define_header( 'xz', netcdf_extend, av )
708
709	!
710	!-- Remove the local file, if it can not be extended
711	IF ( .NOT. netcdf_extend ) THEN
712	nc_stat = NF90_CLOSE( id_set_xz(av) )
713	CALL netcdf_handle_error( 'check_open', 24 )
714	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
715	#if defined( __parallel )
716	!
717	!-- Set a barrier in order to assure that PE0 deleted the old file
718	!-- before any other processor tries to open a new file
719	!-- Barrier is only needed in case of parallel I/O
720	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
721	#endif
722	ENDIF
723
724	ENDIF
725
726	IF ( .NOT. netcdf_extend ) THEN
727	!
728	!-- Create a new netCDF output file with requested netCDF format
729	CALL netcdf_create_file( filename, id_set_xz(av), .TRUE., 25 )
730
731	!
732	!-- Define the header
733	CALL netcdf_define_header( 'xz', netcdf_extend, av )
734
735	!
736	!-- In case of parallel netCDF output, create flag file which tells
737	!-- combine_plot_fields that nothing is to do.
738	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
739	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_XZ' )
740	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
741	CLOSE( 99 )
742	ENDIF
743
744	ENDIF
745
746	CASE ( 103, 113 )
747	!
748	!-- Set filename depending on unit number
749	IF ( file_id == 103 ) THEN
750	filename = 'DATA_2D_YZ_NETCDF' // TRIM( coupling_char )
751	av = 0
752	ELSE
753	filename = 'DATA_2D_YZ_AV_NETCDF' // TRIM( coupling_char )
754	av = 1
755	ENDIF
756	!
757	!-- Inquire, if there is a netCDF file from a previuos run. This should
758	!-- be opened for extension, if its dimensions and variables match the
759	!-- actual run.
760	INQUIRE( FILE=filename, EXIST=netcdf_extend )
761
762	IF ( netcdf_extend ) THEN
763	!
764	!-- Open an existing netCDF file for output
765	CALL netcdf_open_write_file( filename, id_set_yz(av), .TRUE., 26 )
766	!
767	!-- Read header information and set all ids. If there is a mismatch
768	!-- between the previuos and the actual run, netcdf_extend is returned
769	!-- as .FALSE.
770	CALL netcdf_define_header( 'yz', netcdf_extend, av )
771
772	!
773	!-- Remove the local file, if it can not be extended
774	IF ( .NOT. netcdf_extend ) THEN
775	nc_stat = NF90_CLOSE( id_set_yz(av) )
776	CALL netcdf_handle_error( 'check_open', 27 )
777	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
778	#if defined( __parallel )
779	!
780	!-- Set a barrier in order to assure that PE0 deleted the old file
781	!-- before any other processor tries to open a new file
782	!-- Barrier is only needed in case of parallel I/O
783	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
784	#endif
785	ENDIF
786
787	ENDIF
788
789	IF ( .NOT. netcdf_extend ) THEN
790	!
791	!-- Create a new netCDF output file with requested netCDF format
792	CALL netcdf_create_file( filename, id_set_yz(av), .TRUE., 28 )
793
794	!
795	!-- Define the header
796	CALL netcdf_define_header( 'yz', netcdf_extend, av )
797
798	!
799	!-- In case of parallel netCDF output, create flag file which tells
800	!-- combine_plot_fields that nothing is to do.
801	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
802	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_YZ' )
803	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
804	CLOSE( 99 )
805	ENDIF
806
807	ENDIF
808
809	CASE ( 104 )
810	!
811	!-- Set filename
812	filename = 'DATA_1D_PR_NETCDF' // TRIM( coupling_char )
813
814	!
815	!-- Inquire, if there is a netCDF file from a previuos run. This should
816	!-- be opened for extension, if its variables match the actual run.
817	INQUIRE( FILE=filename, EXIST=netcdf_extend )
818
819	IF ( netcdf_extend ) THEN
820	!
821	!-- Open an existing netCDF file for output
822	CALL netcdf_open_write_file( filename, id_set_pr, .FALSE., 29 )
823	!
824	!-- Read header information and set all ids. If there is a mismatch
825	!-- between the previuos and the actual run, netcdf_extend is returned
826	!-- as .FALSE.
827	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
828
829	!
830	!-- Remove the local file, if it can not be extended
831	IF ( .NOT. netcdf_extend ) THEN
832	nc_stat = NF90_CLOSE( id_set_pr )
833	CALL netcdf_handle_error( 'check_open', 30 )
834	CALL local_system( 'rm ' // TRIM( filename ) )
835	ENDIF
836
837	ENDIF
838
839	IF ( .NOT. netcdf_extend ) THEN
840	!
841	!-- Create a new netCDF output file with requested netCDF format
842	CALL netcdf_create_file( filename, id_set_pr, .FALSE., 31 )
843	!
844	!-- Define the header
845	CALL netcdf_define_header( 'pr', netcdf_extend, 0 )
846
847	ENDIF
848
849	CASE ( 105 )
850	!
851	!-- Set filename
852	filename = 'DATA_1D_TS_NETCDF' // TRIM( coupling_char )
853
854	!
855	!-- Inquire, if there is a netCDF file from a previuos run. This should
856	!-- be opened for extension, if its variables match the actual run.
857	INQUIRE( FILE=filename, EXIST=netcdf_extend )
858
859	IF ( netcdf_extend ) THEN
860	!
861	!-- Open an existing netCDF file for output
862	CALL netcdf_open_write_file( filename, id_set_ts, .FALSE., 32 )
863	!
864	!-- Read header information and set all ids. If there is a mismatch
865	!-- between the previuos and the actual run, netcdf_extend is returned
866	!-- as .FALSE.
867	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
868
869	!
870	!-- Remove the local file, if it can not be extended
871	IF ( .NOT. netcdf_extend ) THEN
872	nc_stat = NF90_CLOSE( id_set_ts )
873	CALL netcdf_handle_error( 'check_open', 33 )
874	CALL local_system( 'rm ' // TRIM( filename ) )
875	ENDIF
876
877	ENDIF
878
879	IF ( .NOT. netcdf_extend ) THEN
880	!
881	!-- Create a new netCDF output file with requested netCDF format
882	CALL netcdf_create_file( filename, id_set_ts, .FALSE., 34 )
883	!
884	!-- Define the header
885	CALL netcdf_define_header( 'ts', netcdf_extend, 0 )
886
887	ENDIF
888
889
890	CASE ( 106, 116 )
891	!
892	!-- Set filename depending on unit number
893	IF ( file_id == 106 ) THEN
894	filename = 'DATA_3D_NETCDF' // TRIM( coupling_char )
895	av = 0
896	ELSE
897	filename = 'DATA_3D_AV_NETCDF' // TRIM( coupling_char )
898	av = 1
899	ENDIF
900	!
901	!-- Inquire, if there is a netCDF file from a previous run. This should
902	!-- be opened for extension, if its dimensions and variables match the
903	!-- actual run.
904	INQUIRE( FILE=filename, EXIST=netcdf_extend )
905
906	IF ( netcdf_extend ) THEN
907	!
908	!-- Open an existing netCDF file for output
909	CALL netcdf_open_write_file( filename, id_set_3d(av), .TRUE., 35 )
910	!
911	!-- Read header information and set all ids. If there is a mismatch
912	!-- between the previuos and the actual run, netcdf_extend is returned
913	!-- as .FALSE.
914	CALL netcdf_define_header( '3d', netcdf_extend, av )
915
916	!
917	!-- Remove the local file, if it can not be extended
918	IF ( .NOT. netcdf_extend ) THEN
919	nc_stat = NF90_CLOSE( id_set_3d(av) )
920	CALL netcdf_handle_error( 'check_open', 36 )
921	IF ( myid == 0 ) CALL local_system( 'rm ' // TRIM( filename ) )
922	#if defined( __parallel )
923	!
924	!-- Set a barrier in order to assure that PE0 deleted the old file
925	!-- before any other processor tries to open a new file
926	!-- Barrier is only needed in case of parallel I/O
927	IF ( netcdf_data_format > 4 ) CALL MPI_BARRIER( comm2d, ierr )
928	#endif
929	ENDIF
930
931	ENDIF
932
933	IF ( .NOT. netcdf_extend ) THEN
934	!
935	!-- Create a new netCDF output file with requested netCDF format
936	CALL netcdf_create_file( filename, id_set_3d(av), .TRUE., 37 )
937
938	!
939	!-- Define the header
940	CALL netcdf_define_header( '3d', netcdf_extend, av )
941
942	!
943	!-- In case of parallel netCDF output, create flag file which tells
944	!-- combine_plot_fields that nothing is to do.
945	IF ( myid == 0 .AND. netcdf_data_format > 4 ) THEN
946	OPEN( 99, FILE='NO_COMBINE_PLOT_FIELDS_3D' )
947	WRITE ( 99, '(A)' ) 'no combine_plot_fields.x neccessary'
948	CLOSE( 99 )
949	ENDIF
950
951	ENDIF
952
953
954	CASE ( 107 )
955	!
956	!-- Set filename
957	filename = 'DATA_1D_SP_NETCDF' // TRIM( coupling_char )
958
959	!
960	!-- Inquire, if there is a netCDF file from a previuos run. This should
961	!-- be opened for extension, if its variables match the actual run.
962	INQUIRE( FILE=filename, EXIST=netcdf_extend )
963
964	IF ( netcdf_extend ) THEN
965	!
966	!-- Open an existing netCDF file for output
967	CALL netcdf_open_write_file( filename, id_set_sp, .FALSE., 38 )
968
969	!
970	!-- Read header information and set all ids. If there is a mismatch
971	!-- between the previuos and the actual run, netcdf_extend is returned
972	!-- as .FALSE.
973	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
974
975	!
976	!-- Remove the local file, if it can not be extended
977	IF ( .NOT. netcdf_extend ) THEN
978	nc_stat = NF90_CLOSE( id_set_sp )
979	CALL netcdf_handle_error( 'check_open', 39 )
980	CALL local_system( 'rm ' // TRIM( filename ) )
981	ENDIF
982
983	ENDIF
984
985	IF ( .NOT. netcdf_extend ) THEN
986	!
987	!-- Create a new netCDF output file with requested netCDF format
988	CALL netcdf_create_file( filename, id_set_sp, .FALSE., 40 )
989	!
990	!-- Define the header
991	CALL netcdf_define_header( 'sp', netcdf_extend, 0 )
992
993	ENDIF
994
995
996	CASE ( 108 )
997
998	IF ( myid_char == '' ) THEN
999	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char )
1000	ELSE
1001	filename = 'DATA_PRT_NETCDF' // TRIM( coupling_char ) // '/' // &
1002	myid_char
1003	ENDIF
1004	!
1005	!-- Inquire, if there is a netCDF file from a previuos run. This should
1006	!-- be opened for extension, if its variables match the actual run.
1007	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1008
1009	IF ( netcdf_extend ) THEN
1010	!
1011	!-- Open an existing netCDF file for output
1012	CALL netcdf_open_write_file( filename, id_set_prt, .FALSE., 41 )
1013	!
1014	!-- Read header information and set all ids. If there is a mismatch
1015	!-- between the previuos and the actual run, netcdf_extend is returned
1016	!-- as .FALSE.
1017	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
1018
1019	!
1020	!-- Remove the local file, if it can not be extended
1021	IF ( .NOT. netcdf_extend ) THEN
1022	nc_stat = NF90_CLOSE( id_set_prt )
1023	CALL netcdf_handle_error( 'check_open', 42 )
1024	CALL local_system( 'rm ' // TRIM( filename ) )
1025	ENDIF
1026
1027	ENDIF
1028
1029	IF ( .NOT. netcdf_extend ) THEN
1030
1031	!
1032	!-- For runs on multiple processors create the subdirectory
1033	IF ( myid_char /= '' ) THEN
1034	IF ( myid == 0 .AND. .NOT. openfile(file_id)%opened_before ) &
1035	THEN ! needs modification in case of non-extendable sets
1036	CALL local_system( 'mkdir DATA_PRT_NETCDF' // &
1037	TRIM( coupling_char ) // '/' )
1038	ENDIF
1039	#if defined( __parallel )
1040	!
1041	!-- Set a barrier in order to allow that all other processors in the
1042	!-- directory created by PE0 can open their file
1043	CALL MPI_BARRIER( comm2d, ierr )
1044	#endif
1045	ENDIF
1046
1047	!
1048	!-- Create a new netCDF output file with requested netCDF format
1049	CALL netcdf_create_file( filename, id_set_prt, .FALSE., 43 )
1050
1051	!
1052	!-- Define the header
1053	CALL netcdf_define_header( 'pt', netcdf_extend, 0 )
1054
1055	ENDIF
1056
1057	CASE ( 109 )
1058	!
1059	!-- Set filename
1060	filename = 'DATA_1D_PTS_NETCDF' // TRIM( coupling_char )
1061
1062	!
1063	!-- Inquire, if there is a netCDF file from a previuos run. This should
1064	!-- be opened for extension, if its variables match the actual run.
1065	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1066
1067	IF ( netcdf_extend ) THEN
1068	!
1069	!-- Open an existing netCDF file for output
1070	CALL netcdf_open_write_file( filename, id_set_pts, .FALSE., 393 )
1071	!
1072	!-- Read header information and set all ids. If there is a mismatch
1073	!-- between the previuos and the actual run, netcdf_extend is returned
1074	!-- as .FALSE.
1075	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
1076
1077	!
1078	!-- Remove the local file, if it can not be extended
1079	IF ( .NOT. netcdf_extend ) THEN
1080	nc_stat = NF90_CLOSE( id_set_pts )
1081	CALL netcdf_handle_error( 'check_open', 394 )
1082	CALL local_system( 'rm ' // TRIM( filename ) )
1083	ENDIF
1084
1085	ENDIF
1086
1087	IF ( .NOT. netcdf_extend ) THEN
1088	!
1089	!-- Create a new netCDF output file with requested netCDF format
1090	CALL netcdf_create_file( filename, id_set_pts, .FALSE., 395 )
1091	!
1092	!-- Define the header
1093	CALL netcdf_define_header( 'ps', netcdf_extend, 0 )
1094
1095	ENDIF
1096
1097
1098	!
1099	!-- Progress file that is used by the PALM watchdog
1100	CASE ( 117 )
1101
1102	OPEN ( 117, FILE='PROGRESS'//TRIM( coupling_char ), &
1103	STATUS='REPLACE', FORM='FORMATTED' )
1104	!
1105	!-- nc-file for virtual flight measurements
1106	CASE ( 199 )
1107	!
1108	!-- Set filename
1109	filename = 'DATA_1D_FL_NETCDF' // TRIM( coupling_char )
1110
1111	!
1112	!-- Inquire, if there is a netCDF file from a previuos run. This should
1113	!-- be opened for extension, if its variables match the actual run.
1114	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1115
1116	IF ( netcdf_extend ) THEN
1117	!
1118	!-- Open an existing netCDF file for output
1119	CALL netcdf_open_write_file( filename, id_set_fl, .FALSE., 532 )
1120	!
1121	!-- Read header information and set all ids. If there is a mismatch
1122	!-- between the previuos and the actual run, netcdf_extend is returned
1123	!-- as .FALSE.
1124	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
1125
1126	!
1127	!-- Remove the local file, if it can not be extended
1128	IF ( .NOT. netcdf_extend ) THEN
1129	nc_stat = NF90_CLOSE( id_set_fl )
1130	CALL netcdf_handle_error( 'check_open', 533 )
1131	CALL local_system( 'rm ' // TRIM( filename ) )
1132	ENDIF
1133
1134	ENDIF
1135
1136	IF ( .NOT. netcdf_extend ) THEN
1137	!
1138	!-- Create a new netCDF output file with requested netCDF format
1139	CALL netcdf_create_file( filename, id_set_fl, .FALSE., 534 )
1140	!
1141	!-- Define the header
1142	CALL netcdf_define_header( 'fl', netcdf_extend, 0 )
1143
1144	ENDIF
1145
1146
1147	CASE ( 201:200+2*max_masks )
1148	!
1149	!-- Set filename depending on unit number
1150	IF ( file_id <= 200+max_masks ) THEN
1151	mid = file_id - 200
1152	WRITE ( mask_char,'(I2.2)') mid
1153	filename = 'DATA_MASK_' // mask_char // '_NETCDF' // &
1154	TRIM( coupling_char )
1155	av = 0
1156	ELSE
1157	mid = file_id - (200+max_masks)
1158	WRITE ( mask_char,'(I2.2)') mid
1159	filename = 'DATA_MASK_' // mask_char // '_AV_NETCDF' // &
1160	TRIM( coupling_char )
1161	av = 1
1162	ENDIF
1163	!
1164	!-- Inquire, if there is a netCDF file from a previuos run. This should
1165	!-- be opened for extension, if its dimensions and variables match the
1166	!-- actual run.
1167	INQUIRE( FILE=filename, EXIST=netcdf_extend )
1168
1169	IF ( netcdf_extend ) THEN
1170	!
1171	!-- Open an existing netCDF file for output
1172	CALL netcdf_open_write_file( filename, id_set_mask(mid,av), &
1173	.TRUE., 456 )
1174	!
1175	!-- Read header information and set all ids. If there is a mismatch
1176	!-- between the previuos and the actual run, netcdf_extend is returned
1177	!-- as .FALSE.
1178	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
1179
1180	!
1181	!-- Remove the local file, if it can not be extended
1182	IF ( .NOT. netcdf_extend ) THEN
1183	nc_stat = NF90_CLOSE( id_set_mask(mid,av) )
1184	CALL netcdf_handle_error( 'check_open', 457 )
1185	CALL local_system('rm ' // TRIM( filename ) )
1186	ENDIF
1187
1188	ENDIF
1189
1190	IF ( .NOT. netcdf_extend ) THEN
1191	!
1192	!-- Create a new netCDF output file with requested netCDF format
1193	CALL netcdf_create_file( filename, id_set_mask(mid,av), .TRUE., 458 )
1194	!
1195	!-- Define the header
1196	CALL netcdf_define_header( 'ma', netcdf_extend, file_id )
1197
1198	ENDIF
1199
1200
1201	#else
1202
1203	CASE ( 101:109, 111:113, 116, 201:200+2*max_masks )
1204
1205	!
1206	!-- Nothing is done in case of missing netcdf support
1207	RETURN
1208
1209	#endif
1210
1211	CASE DEFAULT
1212
1213	WRITE( message_string, * ) 'no OPEN-statement for file-id ',file_id
1214	CALL message( 'check_open', 'PA0172', 2, 2, -1, 6, 1 )
1215
1216	END SELECT
1217
1218	!
1219	!-- Set open flag
1220	openfile(file_id)%opened = .TRUE.
1221
1222	!
1223	!-- Formats
1224	3300 FORMAT ('#'/ &
1225	'coord 1 file=',A,' filetype=unformatted'/ &
1226	'coord 2 file=',A,' filetype=unformatted skip=',I6/ &
1227	'coord 3 file=',A,' filetype=unformatted skip=',I6/ &
1228	'#')
1229	4000 FORMAT ('# ',A)
1230	5000 FORMAT ('# ',A/ &
1231	'#1 E'/'#2 E'/'#3 dt'/'#4 u'/'#5 th*'/'#6 umax'/'#7 vmax'/ &
1232	'#8 wmax'/'#9 div_new'/'#10 div_old'/'#11 z_i_wpt'/'#12 z_i_pt'/ &
1233	'#13 w*'/'#14 w''pt''0'/'#15 w''pt'''/'#16 wpt'/'#17 pt(0)'/ &
1234	'#18 pt(zp)'/'#19 splptx'/'#20 splpty'/'#21 splptz')
1235	8000 FORMAT (A/ &
1236	' step time # of parts lPE sent/recv rPE sent/recv ',&
1237	'sPE sent/recv nPE sent/recv max # of parts '/ &
1238	109('-'))
1239
1240	END SUBROUTINE check_open

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |